geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: 7bit on Sat, 25 February 2012, 09:52:58
-
This group buy ended.
Switches will ship within the next few days (20-27 July 2012).
Still waiting for plates, PCBs, stabilisers etc.
Please order more switches in the new Cherry MX switch group buy (http://deskthority.net/marketplace-f11/cherry-mx-taking-pre-orders-t2760.html#p50485)!!!
-------------------------------------------------------------------------------------------------------------------------------
Phantom group buy is closed!
Here is what you could have ordered:
Order-ID product code Price
MXCLEAR MX1A-C1NN 0.57
MXRED MX1A-L1NN 0.57
MXBROWN MX1A-G1NN 0.6
MXBLUE MX1A-E1NN 0.6
MXGREEN MX1A-F1NN 0.6
MXGREY MX1A-D1NN 0.6
MXDARKGREY MX1A-D1NN 0.9
MXWHITE MX1A-A1NN 0.7--0.57
MXBLACK MX1A-11NN 0.9
MXLOCK MX1A-31NN 0.9
MXLOCKPCB MX1A-31NN 0.9
.
If you want to order 100 MXWHITE switches, just send to Phantom:
MXWHITE 100
Please don't forget to add your email address if you did not already submitted it.
Thanks!
-
Thanks 7bit! Everyone order MXWHITE and make it cheap plz.
According to the discussion thread on DT, whites are clicky like blues but feel ... different somehow. Intriguing!
-
Thanks 7bit! Everyone order MXWHITE and make it cheap plz.
According to the discussion thread on DT, whites are clicky like blues but feel ... different somehow. Intriguing!
Sixty compared them to blues. Because for me, blues sound like cracking egg-shells and because of Sixty's description of the whites I sayd they must then sould like cracking mushrooms. I don't have any idea how they feel ...
-
i've never heard a mushroom cracking.. can someone on dt ask sixty to photo the two stems side by side?
-
I didn't buy a phantom, can I still order some of these? It is possible to have them shipped with my round 4 order if I can?
-
Oooh intrigued by how the white switches would feel and sound. Also, correct me if I'm wrong but the green switches have been described as stiffer blues. That right?
-
I put in an order for 110 of the whites. I've never tried blues, but I'm sure this'll be good, too.
Now to get some decent blank clear keycaps for them.
I plan to make the extras into keychains.
-
Hmm white switches huh. I'll probably get a few just to try out.
-
Oooh intrigued by how the white switches would feel and sound. Also, correct me if I'm wrong but the green switches have been described as stiffer blues. That right?
yah, they're stiffer and very slightly more tactile.
-
I sayd they must then sould like cracking mushrooms.
I'd order some just to hear how mushrooms crack. :biggrin1:
-
I'd order some just to hear how mushrooms crack. :biggrin1:
I think of it as the sound of someone eating baby carrots.
-
Doesn't have Dark Grey anymore?
-
Any idea on shipping to Aus for ~100 switches?
Also I'm guessing these are not plate mounted versions, or am I wrong?
-
I've already ordered switches in the Phantom GB. If I want to order more of the same types of switches, do I need to message Phantom with the total number of switches (Phantom GB + additions) or just the additions?
-
Autolyze: Send the updated amount. Like if you want to change from 100 to 110 (like I did) just say:
MXWHITE 110
I think I'm going to do a mix-switched phantom, like what they do on those ducky 'boards. I don't know if having MX white, clear, and green will be that much a difference, though.
-
Doesn't have Dark Grey anymore?
They were limited supply.
Any idea on shipping to Aus for ~100 switches?
Also I'm guessing these are not plate mounted versions, or am I wrong?
They are plate mounted.
-
So what's the difference (besides colour) between these and greens?
'cause if it's nothing, I think I'll have greens for the alphanumeric, and whites for the modifiers (and everything else), just for looks.
-
it's completely unclear, and deskthority is unhelpful, to say the least.
-
Just couldn't resist adding some clears, browns and whites. Expensive, but it's payday after all. \o/
-
well i'm in and paid for a set of whites. it sounds like JC at vortex likes these too, so that's enough endorsement for me.
-
Ordered my switches but the invoice says my switches are going to Korea and not Australia.
Anyone else with this issue?
-
i'll almost certainly have an extra or two that i can send you to document with your macro rig
-
Aw shucks I love blues, so I'm going to regret not getting 115 whites here. My wallet hates you all.
-
I've still never tried blues due to Bestbuy always being out of blackwidows when I drop by. I hope I can compare the clears, greens and whites to it.
-
Now available:
MXLOCK $0.9 or less (MX1A-31NN)
MXLOCKPCB $0.9 or less (MX1A-31NW)
MXDARKGREY $0.9 or less (MX1A-21NN)
.
-
What is MXLOCK?
-
It's a latching Cherry key, there's a thread on DT (http://deskthority.net/viewtopic.php?f=11&t=1970&p=35636#p35636) about them.
-
Ooh, any fun ideas for how to use them on a Phantom? Shift lock?
And are dark greys different from the grey switches used in spacebars?
-
MXLOCK MX1A-31NN
MXLOCKPCB MX1A-31NN
Deadline is now 2012-02-31 (2 March 2012).
-
Ooh, any fun ideas for how to use them on a Phantom? Shift lock?
I'm going to use 1 to activate the numpad layer, 1 to activate mousekeys and maybe 1 for caps lock.
-
MXLOCK MX1A-31NN
MXLOCKPCB MX1A-31NN
Deadline is now 2012-02-31 (2 March 2012).
Isn't the PCB version of this switch supposed to be MX1A-31NW ? Also, do MX1A-31DW (with diodes) exist?
-
What exactly are the differences between the PCB and non-PCB versions? I'm just interested in replacing some existing switches on a PCB mounted keyboard by replacing the stem, spring and it seems like maybe the top half of the housing for these locking ones as they look different.
-
The PCB version has 2 plastic legs/pins on the bottom, for additional stability. It expects 2 extra holes in the PCB. These plastic pins can be easily cut off if you want to convert the switch to a non-PCB mount.
-
you can implement function layer locking in software (a la the poker), so you don't strictly need a locking switch if that's all you want.
-
By they way, Dox posted pics of the switch starting here:
http://geekhack.org/showthread.php?23453-Ordering-from-onlinecomponents&p=445194&viewfull=1#post445194
and he is also saying the switch parts (except for the spring) are not interchangable, so it looks like you will not be able to just install the switch housing top and stem; you'll have to desolder an existing switch if you want to replace it with a latching one.
-
you can implement function layer locking in software (a la the poker), so you don't strictly need a locking switch if that's all you want.
I know, but locking switches add to the awesome :P.
-
The lock mechanism is part of the switch housing, right? So it's not possible to mod a regular switch to become a lock switch?
-
Isn't the PCB version of this switch supposed to be MX1A-31NW ? Also, do MX1A-31DW (with diodes) exist?
Yes, just copy and pasted the wrong product number.
The diode version exists, but I will not order it unless there are around 800 orders for this version.
-
i need getting invoices (that don't reflect my payments...) should i just ignore these until the buy closes?
-
Are the other switches plate or PCB mounted?
-
Are the other switches plate or PCB mounted?
All of them are plate mounted.
-
Ok thanks, I remembered something like that but wanted to be sure. MXLOCK it is, then!
-
Ah, you added the lockable [strike]buttons[/strike] switches! I was going to contact you with regards to this but it seems I didn't have to. I love you for this! :) I'll order 40 of the plate mountable switches, and 5 of the pcb ones. Would order more if I could, but you're already going to get 95% of the money in my bank account and I can't spare the rest. Haha, the sad part is that that's actually true...
Also, I'm a bit confused about this:
MXGREY MX1A-D1NN 0.6
MXDARKGREY MX1A-D1NN 0.9*
The manufacturer's number is the same, but the ordering name you gave is different and the price is different. I tried to order some from Phantom before but it either got ignored, or, what I assumed, it got merged with MXGREY because they're the same.
-
We done witht he invoice spam now? Or are you just hoping I'd pay four times :wof:
-
Did anyone else notice there is no feb 31st? lol. Also whats the shipping cost in the US?
-
So if I have a poker and I get some MX whites, I can pop the poker switches open and switch the guts, is this correct?
This buy is separate from r4 right, so everything will arrive much quicker I'm assuming?
-
So if I have a poker and I get some MX whites, I can pop the poker switches open and switch the guts, is this correct?
Correct; that's the case with all switches except for the locking/latching one MX1A-31NN/W
-
We done witht he invoice spam now? Or are you just hoping I'd pay four times :wof:
Yes, that was the intention.
-
Did anyone else notice there is no feb 31st? lol. Also whats the shipping cost in the US?
Deadline is within February. I don't see a reason why the February should not have as many days as other months right next to him!
-
7bit this is separate from r4 right? These will ship semi soon hopefully?
-
7bit this is separate from r4 right? These will ship semi soon hopefully?
Yes, these will ship way ahead of Round 4.
-
So if I have a poker and I get some MX whites, I can pop the poker switches open and switch the guts, is this correct?
This buy is separate from r4 right, so everything will arrive much quicker I'm assuming?
The switches with LEDs will have to be desoldered before modding, but all the others are easy to pop open while still attached to the PCB.
-
I REALLY want green switches, but I don't know if I really have the money to spend on them... Will this ever happen again?
-
I REALLY want green switches, but I don't know if I really have the money to spend on them... Will this ever happen again?
This. ^^
Could switch group buys become common? How reliable is your source 7bit?
-
It would be hard to hit their MOQ though if it happens often I think
-
It would be hard to hit their MOQ though if it happens often I think
Tsangan, buy me 104 green switches and I will be your best friend and nullify your payment for the WYSE buy.
-
i would expect that we'll have a switch group buy every time a custom keyboard project completes. i don't see this happening more than twice yearly though
-
Ooh, any fun ideas for how to use them on a Phantom? Shift lock?
And are dark greys different from the grey switches used in spacebars?
Wouldn't a locking key use up one of your NKROvers? No biggie if you truly have N=all, but if N=3, that would seem to be a bad idea. Or is it a SPST NO with a momentary closed state between down and up states?
Oddly, Filco just uses another of whatever switch they use in the rest of the keyboard. e.g.: an MX blue in an MX blue board; an MX brown in an MX brown board....
Ripster: MX whites supposedly are exactly the same as blues except: different color stem, different spring (80cn instead of 50cn). Don't you people read the wikis? ;-P
http://deskthority.net/wiki/Cherry_MX_White
http://deskthority.net/wiki/Cherry_MX_Blue
http://geekhack.org/showthread.php?17221-Cherry-MX-White-vs-Clear-vs-Blue <<< check out post #3! lol. So, what will Chloe do now?
Here's a pseudo-wiki in a single page straight from the manufacturer: http://www.cherrycorp.com/english/switches/key/mx.htm (although whites are not listed)
-
Hope I slipped in under the wire for 100 clears ;)
-
Wouldn't a locking key use up one of your NKROvers? No biggie if you truly have N=all, but if N=3, that would seem to be a bad idea.
Modifier keys like shift don't count toward your NKRO, so as long as you don't do something silly like install this switch as your letter A key, it's like holding shift down.
Or is it a SPST NO with a momentary closed state between down and up states?
No, that would be useless.
-
Ripster: MX whites supposedly are exactly the same as blues except: different color stem, different spring (80cn instead of 50cn). Don't you people read the wikis? ;-P
Hmm so basically a blue switch, except more stiff? Isn't that what green switch is?
Btw, when is the real deadline? There is no Feb 31st.
-
Ascaii claims they feel different. Not just stiffer, but different. *shrug*
-
Figured since I almost blew $90 on a Kinesis today, and I'm selling my BWU to a buddy for $80, I might as well jump on the opportunity to buy greens. 110 ordered!
-
I just put in an order for some locking switches as well as some of those mx whites, just to see what all of the hubbub is about. Do you take PayPal, or am I going to have to figure out how to do a bank transfer?
-
I REALLY want green switches, but I don't know if I really have the money to spend on them... Will this ever happen again?
If it will happen again, you will be able to get all sortes of Cherry MX, Cherry ML, ALPS, Topre and Unicomp switches!
It will surely end as Round 4.
So better order you switches now, while you can!
-
This. ^^
Could switch group buys become common? How reliable is your source 7bit?
It is very reliable, but you never know (Round4).
i would expect that we'll have a switch group buy every time a custom keyboard project completes. i don't see this happening more than twice yearly though
I will order as many as I need for a couple of years. I'm not alone.
To be serious: There will be another switch group buy along with the next keyboard project, but I doubt there will be so many exotic switvches available like the greys and geens for example.
Hmm so basically a blue switch, except more stiff? Isn't that what green switch is?
Btw, when is the real deadline? There is no Feb 31st.
Feb 31st == 2nd March (tomorrow!!!!).
I just put in an order for some locking switches as well as some of those mx whites, just to see what all of the hubbub is about. Do you take PayPal, or am I going to have to figure out how to do a bank transfer?
EU: real money!
Restworld: PayPal :-(
-
I sent a PM to Phantom yesterday with 110 MXGREEN and my paypal email in it, but I don't know if it was received. Was I supposed to get some sort of confirmation?
EDIT: I lied. PM'd shipping address.
EDIT2: Alright, I paid as a payment for goods, since that's what this is, and it didn't subtract for fees. Did I do something wrong?
-
Has this order been sent yet? I'd love a delivery of whites to the UK.
-
Out of curiosity, when should we expect to see these show up on our doorstep?
-
7bit
I got 100 MX green can I swap that for 100 MX white?
I'll pay the difference if there is any, is that okay?
I had 101 MXGREEN before and I just sent this into Phantom
MXWHITE 101
MXGREEN 1
MXLOCK 10
MXLOCKPCB 10
-
>.> how dare you get rid of your greens!!!
-
>.> how dare you get rid of your greens!!!
:behindsofa:
-
You better hide!
-
I would like to combine this with my phantom order:
1. 1x MXLOCKPCB
2. 1x MXBLUE
3. 2x MXWHITE
4. 1x MXCLEAR
5. 1x MXRED
6. 1x MXBROWN
7. 1x MXLOCK
Do I just send this order to "Phantom"? And will it be combined with the phantom group buy, or will it charge me separate shipping for this order?
-
Has this order been sent yet? I'd love a delivery of whites to the UK.
I will order from the supplier today and shipping will be in around 4-5 weeks.
-
7bit
I got 100 MX green can I swap that for 100 MX white?
I'll pay the difference if there is any, is that okay?
I had 101 MXGREEN before and I just sent this into Phantom
MXWHITE 101
MXGREEN 1
MXLOCK 10
MXLOCKPCB 10
Just send in the message to Phantom.
-
I would like to combine this with my phantom order:
1. 1x MXLOCKPCB
2. 1x MXBLUE
3. 2x MXWHITE
4. 1x MXCLEAR
5. 1x MXRED
6. 1x MXBROWN
7. 1x MXLOCK
Do I just send this order to "Phantom"? And will it be combined with the phantom group buy, or will it charge me separate shipping for this order?
I will ship every switch separate!
Please add
SHIPUSCHEAP 8
to your order!
-
Are there shipping options for the UK?
MXWHITE 90 is enough to replace the browns from my UK majestouch ninja tkl with whites (the box says 88 keys)?
Do I need any diodes to keep NKey rollover?
Can anyone link me an example of how to switch the innards of the current switches with the new ones, without soldering?
-
Are there shipping options for the UK?
MXWHITE 90 is enough to replace the browns from my UK majestouch ninja tkl with whites (the box says 88 keys)?
Do I need any diodes to keep NKey rollover?
Can anyone link me an example of how to switch the innards of the current switches with the new ones, without soldering?
For shipping, use
SHIPEUCHEAP
The diodes are only necessary for building new keybaords (like the Phantom) if you want to replace brown stems by white, you will not need to order diodes.
You just have to pop open the 4 latches and pull out the brown slider along with the spring once the cover came up. Does not work for platemounted switches, BTW. These must be desoldered first, except if you own the innovative Phantom keyboard!
-
I sent payment for my order, just wanting to confirm!
-
I sent payment for my order, just wanting to confirm!
OK, thanks!
Group buy is closed, but for sure, you still can order leftovers.
I will keep a reserve to cover losses during shipping, which will be sold after the initial shippment.
-
OK, thanks!
Group buy is closed, but for sure, you still can order leftovers.
I will keep a reserve to cover losses during shipping, which will be sold after the initial shippment.
Huh? I sent payment a few days ago when GB was still open. Order Invoice #0144 for snowboarder3
Order-ID |Description |Price|Qty|Pcs|Total
MXBLACK |MX black plate mount switch (0.7EUR) | 0.90| 2| 2| 1.80
MXBROWN |MX brown plate mount switch (0.45 EUR) | 0.60| 4| 4| 2.40
MXCLEAR |MX clear plate mount switch (0.43 EUR) | 0.57| 65| 65|37.05
MXDARKGREY |MX greyplate mount switch (0.7EUR) | 0.90| 2| 2| 1.80
MXGREEN |MX green plate mount switch (0.45 EUR) | 0.60| 5| 5| 3.00
MXGREY |MX greyplate mount switch (0.45 EUR) | 0.60| 5| 5| 3.00
MXRED |MX red plate mount switch (0.43 EUR) | 0.57| 5| 5| 2.85
MXWHITE |MX white plate mount switch (0.45 EUR) | 0.60| 5| 5| 3.00
SHIPUSCHEAP|Shipping costs within US for cheapskates| 7.00| 1| 1| 7.00
Sum |before fees | | | 94|61.90
PAYPAL |PayPal fees | 2.9%| | | 1.80
Total | | | | 94|63.70
after that I sent a "dummy" message to phantom but it contained the word phantom, which increased my phantom PCB order by 1 (don't want this) and it is invoicing me to pay again for the same order. I paid for the original switches listed above though. I hope I'm not too late?
-
Huh? I sent payment a few days ago when GB was still open. Order Invoice #0144 for snowboarder3
...
after that I sent a "dummy" message to phantom but it contained the word phantom, which increased my phantom PCB order by 1 (don't want this) and it is invoicing me to pay again for the same order. I paid for the original switches listed above though. I hope I'm not too late?
LOL!!!!
I will remove that one PHANTOM from your order.
Be more careful what you order next time!
:-)
-
LOL!!!!
I will remove that one PHANTOM from your order.
Be more careful what you order next time!
:-)
Thanks. I already paid on the 29th for it, so am I good to go? Just making sure I got in the GB in time!
-
So the switch prices are now locked and I should pay the latest invoice?
-
So the switch prices are now locked and I should pay the latest invoice?
You did not pay your last invoice?
However, prices will not change anymore, except for shipping costs to far away locations.
You still can order more switches, but they might be sold out soon.
-
You did not pay your last invoice?
Ha, no, I didn't. I've received 10 invoices over the last week or so, how am I to know which one is the one I should pay?
edit: paid up :)
-
So if I paid my first invoice (putting the appropriate text from the invoice in both the subject and body of the paypal payment) but just got another one, I don't need to pay this one too, right? :p
-
So if I paid my first invoice (putting the appropriate text from the invoice in both the subject and body of the paypal payment) but just got another one, I don't need to pay this one too, right? :p
I don't have an update for the latest payments.
But I won't hold you back if you paid twice ...
-
i think i'm overpaid but i'm not sure by how much. i'll just work it out after delivery or something...
-
7bit, am I good to go then? I paid my invoice on the 29th for the price that my order currently shows. Just making sure I didn't **** up and miss out!
-
I will ask for an update of how much everybody paid.
Please stand by for a new spam wave ...
-
can you squeeze an additional order in now? i didn't notice there was such a GB! i wanna get a few of these rare switches..
edit: just sent my order, but please ignore it if it will not be accepted.
-
You can probably order some of the extras once he puts them up for sale. Because technically this GB is closed. "Technically"... These tend to be indefinitely dragged out...
-
I ordered 110 whites a few days ago. I hope that helps you with prices. Its too bad we didn't know about them earlier, or we could have drummed up more interest.
-
Yes and it was even tougher for those who knew, no time to decide, no time to jump off of other switches, and in the end a nice burden for your wallet. :P
I have spent 250$ on switches. FFFFFFFFUUUUUUUUUUUUUUUUUUUUUU!!!
I kind of regret it. And I kind of don't. You know. That Geekhack feeling.
-
I have spent 250$ on switches. FFFFFFFFUUUUUUUUUUUUUUUUUUUUUU!!!
I kind of regret it. And I kind of don't. You know. That Geekhack feeling.
That is a sig-worthy quote right there.
-
You can probably order some of the extras once he puts them up for sale. Because technically this GB is closed. "Technically"... These tend to be indefinitely dragged out...
You still can order all switches (in limited quantities).
-
it wasn't even known that these white switches were available until after the phantom gb closed. it's still not clear what their characteristics are, as the people who have them haven't measured them, and cherry doesn't have a datasheet up for them. i think we managed pretty good volume for them considering.
-
I will ask for an update of how much everybody paid.
Please stand by for a new spam wave ...
ever get a chance to update?
-
Is it still available to order just a few (like 1-3x) of the switches? I wanted to add some for a full cherry keychain set I have planned.
-
Is it still available to order just a few (like 1-3x) of the switches? I wanted to add some for a full cherry keychain set I have planned.
WASD sells switches now, if that helps.
-
for volumes of 1-3x, mouser/digikey/wasd are probably the way to go.
-
WASD has a volume discount too (lowest it goes is 80 cents per switch)
-
Is it still available to order just a few (like 1-3x) of the switches? I wanted to add some for a full cherry keychain set I have planned.
Just send an order!
-
WASD sells switches now, if that helps.
WASD:Buy 100 for $0.80 each and save 55%
Phantom: any quantity for $0.90-0.57 each.
Also, they only have PCB-mount switches.
-
WASD:Buy 100 for $0.80 each and save 55%
Phantom: any quantity for $0.90-0.57 each.
Also, they only have platemount switches.
The only PCB mount switch you're selling are the locking ones... 1/10 isn't lying, but still misleading.
-
im just curious. i have a KBT RACE keyboard which has LED attached to each switch. can i desolder that switch and change it to the MXLOCK switch and still retain the LED for the caps lock?
-
You will have to change the firmware. The lock switch is ON-OFF instead of momentary ON.
-
The LED is not in the exact same location on the lock switches as on the regular ones (I'm quite sure at least). You might be able to trick it into working by bending the LED leads. I don't think you would want to make the caps lock into a locking switch though, without remapping it to something else. I'm not sure it would behave any well. And besides that the caps lock led lights up from the caps lock "state" being on, not holding shift (which would be the roughly similar thing). It is controlled through the keyboard controller, which will know nothing of your changing of switches...
-
oh no i'm lost already.
i thought if you press the MXLOCK switch, the switch will lock into a pressed position (thus sending one keystroke to the computer) and returns to the default position if pressed again (thus sending another keystroke to the computer).
from my point of logic, what is different from the actual usage?
thank you..
-
Hi I've tried to edit my order like 3 times now but the bot keeps sending my old order to my email. Anyway reset everything and make my order again? I don't think I'm doing anything wrong cos I managed to edit my order before now.
-
The lock switch is ON-OFF, a regular mx switch is momentary ON.
When you press the lock switch it stays down and continually sends signal. When you press it again it comes back up.
When you press a regular mx switch it sends the signal once and comes back up.
The keyboard controllers firmware would have to be changed to go into capslock state when there is continuous signal. Because normally a single signal toggles the capslock state.
The LED would already have to be desoldered to install the lock switch. The holes look to be in the same place as a regular mx switch so you shouldn't have a problem resoldering it.
-
The only PCB mount switch you're selling are the locking ones... 1/10 isn't lying, but still misleading.
Fixed my post: they sell only PCB-mount versions.
-
The LED is not in the exact same location on the lock switches as on the regular ones (I'm quite sure at least). You might be able to trick it into working by bending the LED leads. I don't think you would want to make the caps lock into a locking switch though, without remapping it to something else. I'm not sure it would behave any well. And besides that the caps lock led lights up from the caps lock "state" being on, not holding shift (which would be the roughly similar thing). It is controlled through the keyboard controller, which will know nothing of your changing of switches...
Just pressed my Caps lock key down for a while. It stays on. To switch it off with the lock switch, you have to press it once more to release and then once again to set the Caps Lock state to off. Not exactly the effect it should have. It would be better to map it to a modifier key (like Shift) or really change the firmware.
-
Hi I've tried to edit my order like 3 times now but the bot keeps sending my old order to my email. Anyway reset everything and make my order again? I don't think I'm doing anything wrong cos I managed to edit my order before now.
You can only add stuff, not remove it amore. Not that we ordered everything and pople jump off!
But I can remove it for you, just write m a message what you want to get rid of.
-
Fixed my post: they sell only PCB-mount versions.
wasd only sell NN (plate mount) in red, black, blue, and brown. Phantom is selling 9 plate mount and 1 PCB mount (lock). You actually made it worse...
-
The LED would already have to be desoldered to install the lock switch. The holes look to be in the same place as a regular mx switch so you shouldn't have a problem resoldering it.
I don't know what pictures you are looking at. I am looking at these (http://geekhack.org/showthread.php?27320-Group-Buy-Alternative-Action-Cherry-Switch-%28MX1A-31NW%29-for-Function-Lock&p=514191&viewfull=1#post514191), and that LED hole is not in the same location as usual. I would say it looks like they might be using both of the rightmost LED and diode holes.
-
(http://geekhack.org/attachment.php?attachmentid=30780&d=1320372995)
Looks the same to me. You just bend the pins through the middle 2 holes like normal.
-
wasd only sell NN (plate mount) in red, black, blue, and brown. Phantom is selling 9 plate mount and 1 PCB mount (lock). You actually made it worse...
OK, then I read it wrong. But my prices are still cheaper!
$1 vs. $0.57 for the reds!!!
And they don't offer whites, greens, greys, locks etc.
-
Which is why you have my money.
-
Looks the same to me. You just bend the pins through the middle 2 holes like normal.
Looky, looky at that... I was under the impression that the switch housing was going to be quite different, but the bottom at least looks just the same, except it actually looks like the leftmost holes are not holes. So I guess that might work if the leads don't get in the way of something else in there.
-
Even the right 2 holes aren't fully cleared... Quality control was on break. Lets hope the phantom latching switches have their holes cleared. Otherwise we'll have to perform an enema.
-
Is there a paypal option for Europeans? I've just spoken to my bank about transfer and they're gonna charge me ~£15 or £9 plus the costs at the other end. For £35 switches, I can't afford that!
-
gah, 7bit, please submit the order, don't let this drag on forever!
-
gah, 7bit, please submit the order, don't let this drag on forever!
Switches are already ordered!
Most of them are currently colored plastic pearls, steel coils, steel wires and a gold bar.
But soon, they will be genuine Cherry MX switches!
-
Most of them are currently colored plastic pearls, steel coils, steel wires and a gold bar.
But soon, they will be genuine Cherry MX switches!
Ah, the miracle of life.
-
yay!
-
Just send an order!
Thought I did: I'll resend the PM to phantom.
-
Thought I did: I'll resend the PM to phantom.
You did it the wrong way!
It is:
MXPINK 100
MXORANGE 50
etc.
Also, you must add your e-mail address, like:
domina@sm.xxx
-
I googled "domina@sm.xxx"...
http://lmgtfy.com/?q=%22domina%40sm.xxx%22 (http://lmgtfy.com/?q=%22domina%40sm.xxx%22)
What sites are you on 7bit?
Click images if you're not at work.
-
MXPINK 100
MXORANGE 50
LIAR! Sadly, there are no pink or orange switches.
Are there any extra teensy controllers? I put in an extra order to phantom, but he seems to have ignored me.
-
captain: you can order teensies directly from pjrc for about the same price as the gb.
-
captain: you can order teensies directly from pjrc for about the same price as the gb.
Who/what is pjrc, please?
-
http://www.pjrc.com/ (http://www.pjrc.com/)
-
Switches are already ordered!
Most of them are currently colored plastic pearls, steel coils, steel wires and a gold bar.
But soon, they will be genuine Cherry MX switches!
I paid a while back. Just wanting to confirm I did everything right if it's not too much work for ya! thanks!
-
I googled "domina@sm.xxx"...
http://lmgtfy.com/?q=%22domina%40sm.xxx%22 (http://lmgtfy.com/?q=%22domina%40sm.xxx%22)
What sites are you on 7bit?
Click images if you're not at work.
I just thought out that domain name and e-mail address. Are these links to keyboard porn sites?
-
Also, you must add your e-mail address, like:
domina@sm.xxx
I googled "domina@sm.xxx"...
http://lmgtfy.com/?q=%22domina%40sm.xxx%22 (http://lmgtfy.com/?q=%22domina%40sm.xxx%22)
What sites are you on 7bit?
Click images if you're not at work.
I just thought out that domain name and e-mail address. Are these links to keyboard porn sites?
Not keyboard porn, just porn. I googled it out of curiosity because "domina@sm.xxx" sounded like "domination@sadomasochism.xxx".
FOR SCIENCE!
-
Not keyboard porn, just porn. I googled it out of curiosity because "domina@sm.xxx" sounded like "domination@sadomasochism.xxx".
FOR SCIENCE!
Did you find some interesting mechanical switches?
Any Cherries?
-
Did you find some interesting mechanical switches?
Any Cherries?
Only filthy worn out used ones. That's why I only buy NIB!
In all seriousness I still can't find anywhere that even mentions that they once sold the MXSUPERGREYs... Who put them in the wiki?
-
Only filthy worn out used ones. That's why I only buy NIB!
In all seriousness I still can't find anywhere that even mentions that they once sold the MXSUPERGREYs... Who put them in the wiki?
I think that was me, but I did not want to add them because I did not want to wait any longer with the order. There should be another switch group buy along with the next keyboard project.
-
i'm going to have enough exotic switches for the end of the world once these come in -- i'm in no hurry to redo this.
-
I'm thinking about making a full keyboard of MXSUPERGREY. That would be cool, but I'm guessing they would be considerably louder than blues. But I can always crank my klipsch speakers or HD650 to drown that out. Reds are king for videogames, but typing is still up for grabs with me. I will be filling 10 of the 15 spots on my STB (Switch Try Board) with switches from this GB. MXSUPERGREY and ML (with an ML keycap) would make that 12. What should the final 3 be?
-
Switches are already ordered!
Most of them are currently colored plastic pearls, steel coils, steel wires and a gold bar.
But soon, they will be genuine Cherry MX switches!
I didn't get an updated invoice after payment... Am I in?
-
I didn't get an updated invoice after payment... Am I in?
I will send out some spam in a few hours or days....
-
Still says I owe money but I paid it like 5 days ago :|
Amount Due | | | | | 19.14
-
Still says I owe money but I paid it like 5 days ago :|
Amount Due | | | | | 19.14
I didn't want to send this. Wrong parameter.
I'm waiting for an update on this.
-
Recall Recall Recall!!!
-
Still says I owe money but I paid it like 5 days ago :|
Amount Due | | | | | 19.14
Same here, received the same invoice today even though I paid a few days ago.
-
Glad I'm not the only one. Paid on the 29th and it's still saying that I owe full payment.
-
Still says I owe money but I paid it like 5 days ago :|
Amount Due | | | | | 19.14
Man, I wish mine only said 19.14
-
I also am still getting an invoice, despite the fact that I paid in full on March 1st.
-
I don't have the update yet!
Sorry.
But you can still order more!!!!
-
Man, I wish mine only said 19.14
That's what's remaining, I too wish it was only $19.14 lol
Total | | | |626| 391.84
Payments | | | | |-372.70
Amount Due | | | | | 19.14
Close it already 7bit so everyone can pay up and get things moving :|
-
That's what's remaining, I too wish it was only $19.14 lol
Total | | | |626| 391.84
Payments | | | | |-372.70
Amount Due | | | | | 19.14
Close it already 7bit so everyone can pay up and get things moving :|
Haha, here's mine! I wish mine was only 19.14 too... :S
Total | | | |1007| 451.85
Payments | | | | |-473.95
Amount Due| | | | | -22.10
Also, as I understand it the group buy is closed and 7bit has already placed the order with his supplier. It doesn't matter if he's allowing people to order more though as he's just selling from the reserve. This isn't delaying anything for anyone.
-
But you can still order more!!!!
I keep trying, but it keeps not adding them. I think I'll just add some to my next mouser order.
-
will we get any notification when the switches are sent out? my first time ordering with 7bit and did not order any phantoms :)
-
will we get any notification when the switches are sent out? my first time ordering with 7bit and did not order any phantoms :)
Yes, there will be a notification.
Switches will be delivered in the first week of May.
-
Boooooo another missed opportunity. I never make it to the best group buys. Any idea when round 2 will commence? =/
-
Just order what you want from his reserve.
-
Could I get my hands on 100 blue MX1A-E1NN?
-
so ive orderd and paid, am i going to be waiting a while for these?
i dont care if i am, i just want to know an approximation of how long.
-
Why is it that nobody knows how to read?
So when we non-phantomist can expect our switches?
:shock: Voraussichtlicher Liefertermin: 19. KW (07.05.2012-11.05.2012)
:roll: May 2012
Su Mo Tu We Th Fr Sa
1 2 3 4 5
6 7 8 9 10 11 12<------delivery to 7bit
13 14 15 16 17 18 19<------delivery to Ekaros
20 21 22 23 24 25 26
27 28 29 30 31
:-)
Thanks I like that info!
-
i thought it was supposed to be 5-6 weeks from when you ordered 2 weeks ago? and didn't you just say you'd get them may 5 or something in the phantom thread?
oh well. i guess i have lots of things to do until then*
*i have nothing to do until then
-
i thought it was supposed to be 5-6 weeks from when you ordered 2 weeks ago? and didn't you just say you'd get them may 5 or something in the phantom thread?
oh well. i guess i have lots of things to do until then*
*i have nothing to do until then
Voraussichtlicher Liefertermin: 19. KW (07.05.2012-11.05.2012)
May 7-11 is close enough to May 5. It's not set in stone.
-
actually it's probably just factoring for domestic shipping time
it makes me sad regardless.
-
crap I likely wont have toggle switches in time for Diablo three that makes me a sad panda :(
-
because i didnt read the 12 pages of this thread?
thanks.
-
What exactly do you (7bit) have in your reserve? There are a couple posts a few pages back that just say to "order what you want from his reserve." If there indeed is an opportunity to buy leftovers I'd be incredibly interested. Can't believe I missed this the first time around.
-
Third post on this page http://deskthority.net/viewtopic.php?f=11&t=1494&start=270
7bit on 05 Mar 2012, 20:18
"Here is the next statistic for you:
CODE: SELECT ALL
Order-ID | qty|order|res| stock
MXBLACK | 627| 800|200| 173
MXDARKGREY| 439| 800|200| 361
MXLOCK | 416| 800|200| 384
MXGREY | 1347| 1500|200| 153
MXBLUE | 1538| 1700|200| 162
MXWHITE | 1656| 2000|300| 344
MXGREEN | 2123| 2400|300| 277
MXBROWN | 2338| 2700|300| 362
MXRED | 4517| 4700|400| 183
MXCLEAR | 5639| 5900|400| 261
qty: how many are being ordered.
res: the reserve will be sold after the initial shippment.
order+res: what I ordered from the supplier.
stock: what you can still order."
-
Third post on this page http://deskthority.net/viewtopic.php?f=11&t=1494&start=270
7bit on 05 Mar 2012, 20:18
"Here is the next statistic for you:
CODE: SELECT ALL
Order-ID | qty|order|res| stock
MXBLACK | 627| 800|200| 173
MXDARKGREY| 439| 800|200| 361
MXLOCK | 416| 800|200| 384
MXGREY | 1347| 1500|200| 153
MXBLUE | 1538| 1700|200| 162
MXWHITE | 1656| 2000|300| 344
MXGREEN | 2123| 2400|300| 277
MXBROWN | 2338| 2700|300| 362
MXRED | 4517| 4700|400| 183
MXCLEAR | 5639| 5900|400| 261
qty: how many are being ordered.
res: the reserve will be sold after the initial shippment.
order+res: what I ordered from the supplier.
stock: what you can still order."
Ah thanks. Good to know that he's still got buttloads of 'em ;)
-
Any news or way to confirm that my payment was received and that my switches are accounted for?
Thanks!
-
I already paid 50% but don't have any update???
-
I'm still waiting for an update.
-
Are there enough spares for me to add 70 clears to my order?
-
Are there enough spares for me to add 70 clears to my order?
MXCLEAR are sold out.
-
Am I responsible? Did mine even go through? ;P
:-)
-
Any MX green (or white) switches left? I may be interested in a set for my poker.
-
7bit: have I paid? I completely don't remember if I did or not. Is there some info from me you'd need to check?
-
when are these switches expected to ship?
-
the update that was rolled back was that the rest of the switches are about 2-3 weeks out from 7bit. figure another week for shipping (intercont. then domestic), and hopefully that will do it.
-
I literally just answered this in post #166... That's only a few posts ago...
Why is it that nobody knows how to read?
So when we non-phantomist can expect our switches?
:shock: Voraussichtlicher Liefertermin: 19. KW (07.05.2012-11.05.2012)
:roll: May 2012
Su Mo Tu We Th Fr Sa
1 2 3 4 5
6 7 8 9 10 11 12<------delivery to 7bit
13 14 15 16 17 18 19<------delivery to Ekaros
20 21 22 23 24 25 26
27 28 29 30 31
:-)
Thanks I like that info!
-
Any updates on this? We are entering the week for which delivery was tentatively stated. It certainly would be understandable if this is delayed but an update would be greatly appreciated.
Can we still order switched if so which? Has 7bit received all of the switches? Etc.
-
Also, can I check if I've paid or not? I don't want to be dropped by some mistake.
-
any updates?
-
i need my green switches!!!
-
can't wait to get rid of the clack with some clears! :)
-
You should have ordered grey 39 then, that's what I'm getting. They are even more tactile than clears.
-
Also, can I check if I've paid or not? I don't want to be dropped by some mistake.
seriously. this is like my fifth time requesting acknowledgement of payment :/
-
I've done more, but since I know I paid I know I'll get my switches.
-
Switches are being delivered this week.
I will also start shipping if only switches are ordered.
BUT: Because I did not get an update about the payments for ages, I will only ship to those who's payments are confirmed.
-
Can I just send you the paypal info? That would prove I paid.
-
Can I just send you the paypal info? That would prove I paid.
When Biniaris is gone with the money, who pays me the switches?
-
Damn... Where the hell did he go anyway? On both GH and DT there are people saying he owes them this or that, and they haven't heard anything from him...
-
Damn... Where the hell did he go anyway? On both GH and DT there are people saying he owes them this or that, and they haven't heard anything from him...
You're looking for 7bit not Bini
-
7bit: How can I pay? :)
-
When Biniaris is gone with the money, who pays me the switches?
Where is he?
-
Where is he?
I'm quite sure he is extremely busy with something more important, so we have to wait.
-
the saddest thing is that no confirmation was given, so how can we confirm with TS?
please list out your instructions so we can follow.
-
Yeah, I don't even know if I paid or not. If I've paid, cool, but I'm afraid that I haven't paid yet, and won't get any switches, and they'll be sold to someone else by mistake.
-
i think people are just going to have to hold their horses until tptb have a moment to resync.
-
What is the situation if you already have my money?
-
Biniaris has my money, but hasn't been in contact with 7bit to give him the money and say whos paid... Which means no switches for Ed 'till Biniaris comes out of hiding...
-
So worst case, what if he took the money and ran? Paypal disputes?
-
7bit should call him up and tell him to get his ass in gear. We all want our switches that we already paid for months ago damnit!
I don't think I'd open a paypal dispute unless even 7bit thinks he ran. And if he did run I hope 7bit will still send me my switches.
With his feedback score it seems highly unlikely he ran. But come on, how hard could it be to send 7bit the money and paid list? Even the busiest person has some spare time...
-
Isn't there a time limit on how long you can file a dispute? I understand he may be busy, but even a 2 minute "hey, I have the money but am really busy for X days" would suffice.
-
7bit should call him up and tell him to get his ass in gear. We all want our switches that we already paid for months ago damnit!
I don't think I'd open a paypal dispute unless even 7bit thinks he ran. And if he did run I hope 7bit will still send me my switches.
With his feedback score it seems highly unlikely he ran. But come on, how hard could it be to send 7bit the money and paid list? Even the busiest person has some spare time...
Or rather, not organize in the first place if he/she does not have sufficient time.
-
Isn't there a time limit on how long you can file a dispute? I understand he may be busy, but even a 2 minute "hey, I have the money but am really busy for X days" would suffice.
I got the list and will send out spam later today.
He told us he had to remove the chads inside the holes (10000 of them), so this kept him busy for a while.
:-)
-
yay, spam!! :)
-
YAY, just got confirmation of my order too! Glad I made it, ergo clears here I come.
-
I still haven't gotten the spam... (goes and checks email yet again just to be sure) WTF?! YAY SPAM!
So does this mean you have my money 7bit? And that my switches will be shipping soon?
-
The invoice I got contained the extras in it, which are marked as DO NOT PAY.
So I adjusted the price, I hope I didn't make a mistake xD.
-
"*NOT*" with asterisks seems like a double negative to me. Although these asterisks may just be placeholders instead of a negative.
-
It's stupid vbulletin changing my non breaking spaces to *. (my layout makes shift + space do a non breaking space). Fixed.
-
Got ya, but what are "the extras" you speak of that you don't have to pay for?
-
preorder for the next run.
-
The invoice I got contained the extras in it, which are marked as DO NOT PAY.
So I adjusted the price, I hope I didn't make a mistake xD.
Yes, this is right! I was too lazy to program something for these. Currently, there are not enough orders for these.
edit: Did SP mess up the Awesome face again?
-
Ah, you won't be seeing those for (atleast) a year.
-
edit: Did SP mess up the Awesome face again?
If they did then I would expect ripster would be whining about it in every other thread. But I have no clue.
-
edit: Did SP mess up the Awesome face again?
Nop, it's exactly how I wanted it :D
@The_Ed: I think it was a joke on my new avatar.
-
Your avatar disconcerts me Djuzuh...
@The_Ed: I think it was a joke on my new avatar.
Ah, I get it now... I've been up too long... 3:53 AM...
-
The remaining switches just arrived.
I will pack them over the weekend and ship on Monday.
-
no pic this time? :(
-
Biniaris, check your paypal email from the 18th! My poor switches need to come home! :whip:
-
So is there someway I can donate my 10 euro-cents? Or can I use them on forum? ;D
-
are they mailed? :D
thanks for the hard work!
-
So is there someway I can donate my 10 euro-cents? Or can I use them on forum? ;D
Just send
ROUND4
and it will be available to buy Round 4 stuff.
-
are they mailed? :D
thanks for the hard work!
Shipping starts on Tuesday.
-
Just send
ROUND4
and it will be available to buy Round 4 stuff.
That's an evil scheme... Trying to make me spend more money to use my remaining money...
Still, no work no keycaps :(
Does ROUND5 work? ;D
-
Is this closed now? Or can we still get in for MX Clears?
-
This isn't really closed, they are left overs.
But there are no MX clear leftovers. But you can preorder some, and as soon as this GB gets to 800 MX switchs, 7bit will order some.
But he might redo it, to include PCB mounted switchs.
-
There might be a lot of interest in another switch GB as the Ergo keyboard project comes to a head. Guess we'll just have to wait and see.
Cheers,
-
Is this closed now? Or can we still get in for MX Clears?
There is not much left over. I will start a new switch group buy next week.
These are currently available:
MXDARKGREY|$0.9
MXLOCK |$0.9
MXBLACK |$0.9
MXWHITE |$0.6
MXGREY |$0.6
-
there doesn't seem to be any grey switch left, as I couldn't order any.
Also, did you already ship my package, or can I still add the few white switch I added.
-
there doesn't seem to be any grey switch left, as I couldn't order any.
Also, did you already ship my package, or can I still add the few white switch I added.
I did not yet ship, but will ship anytime soon, so it might be too late for the one or other.
-
Do I pay up the difference, or can I pay more and transfer it to the next GB. I don't think it's worth it to make an IBAN transfer for a few bucks xD
EDIT: meh, don't send the white ones, It's ok.
-
Do I pay up the difference, or can I pay more and transfer it to the next GB. I don't think it's worth it to make an IBAN transfer for a few bucks xD
EDIT: meh, don't send the white ones, It's ok.
Just pay as much as you like and order the ROUND4 kit afterwards.
-
I already paid up for R4 too.
-
Where is Biniaris ? I paid my invoice back in March 8, but received a duplicate invoice last week. Sent you (7bit) and Biniaris, a few days ago, the paypal email verifying my payment transaction, but didn't hear from him yet though.
Please confirm that I will receive my switches, and that I do not owe any money. Thanks!
-
I received a double invoice as well. A confirmation of who's paid would be handy.
-
so when will my switches be shipped?
-
so when will my switches be shipped?
I've started shipping last week and the rest will ship within this week
-
excellent :)
unfortunately, I will be in the Northfjords of Iceland for a couple weeks :p can't wait to get back and have a lot of modding to do!
-
I've started shipping last week and the rest will ship within this week
Are you shipping to US folks too, or is Biniaris? When will the US orders ship?
-
I will start a new switch group buy next week.
I would like to participate in the next switch group buy if/when you start it.
-
I would like to participate in the next switch group buy if/when you start it.
It's already up.
-
It's already up.
Oh, thanks for letting me know! I guess I was being daft... I didn't find it on the 1st page -- didn't think to look on the 2nd page.
-
Are you shipping to US folks too, or is Biniaris? When will the US orders ship?
So... does anyone know the answer to this yet? I'm wondering when I'll see them.
-
My assumption was that they were sorting this and the Phantom stuff at Bini's place this weekend, though I don't know for sure.
My hope is that it'll all come together soon, so I can happily solder my Phantom. mmmm.
-
still waiting patiently for it :")
-
so when will my switches be shipped?
I've started shipping last week and the rest will ship within this week
still waiting on my switches.
-
I pack the packages over the week-end and ship on next Monday.
But I still wait for the plates, PCBs, stabilisers etc.
-
This group buy ended.
Switches will ship within the next few days (20-27 July 2012).
Still waiting for plates, PCBs, stabilisers etc.
Please order more switches in the new Cherry MX switch group buy (http://deskthority.net/marketplace-f11/cherry-mx-taking-pre-orders-t2760.html#p50485)!!!
Thanks!
ps: The link in my signature is invalid.
-
HAS MY SWITCH ORDER BEEN POSTED??????????????????????
-
i'm waiting for it very patiently! hopefully, my package is included in the 20-27 july postage
-
Can one of the US guys put a heads up here when they get their order? I didn't see anything in my inbox confirming that my order would be shipped, other than my initial payment and a notification sent on 5/25/2012.
-
i got mine about a month ago, if not more.
well alaric got mine, since he's building my phantom.
oh wait, this is something different.
my phantom switches from that GB have been shipped >.< ignore me
-
Can one of the US guys put a heads up here when they get their order? I didn't see anything in my inbox confirming that my order would be shipped, other than my initial payment and a notification sent on 5/25/2012.
likewise, and im waiting
VERY ****ING IMPATIENTLY.
WHERE ARE MY SWITCHES?
-
never never land, just like mine.
-
haven't gotten anything. i've emailed and PM'ed and receive no replies.
what's happening? i've got a bad feeling that my money's down the drain.
-
I got my 110 green switches today. Shipped from Biniaris. So they will probably get to you eventually.
-
Mine showed up today as well
-
Still waiting too..
-
I received mine yesterday.
-
Man i wish i had bought a bunch of white switches. They might be my new favorite. Much less clacky then a blue/green but with the same feel.
-
7bit: I (we) have been _extremely_ patient so far, but I can tell you that I'm just about to loose my patience. You stated earlier that "Switches will ship within the next few days (20-27 July 2012)", and the 27th is 17(!) days ago, but I have still not received my switches! I did not order any "phantom parts", only switches, so there is no reason for you to take this long to ship them. (Please note that I'm not counting the days from the previously promised shipping dates.)
Please keep in mind that by continuously delaying the shipping of our switches, you not only piss people off, but you reflect badly on the whole group buying community that we have here. I, for one, feel reluctant to join another group buy after this experience and if others feel the same, this might hurt those that wish to participate in a group buy.
So I sincerely ask of you, get organized and get those switches shipped ASAP!!!
Best Regards
/Nakkor
-
I got mine with the phantom kit in the mail on Friday. Perhaps 7bit mailed the switches to Biniaris, who shipped them to you, and it'll take another day?
I am sure everything will work out okay.
-
I'm not going to hold my breath.
-
7bit: I (we) have been _extremely_ patient so far, but I can tell you that I'm just about to loose my patience. You stated earlier that "Switches will ship within the next few days (20-27 July 2012)", and the 27th is 17(!) days ago, but I have still not received my switches! I did not order any "phantom parts", only switches, so there is no reason for you to take this long to ship them. (Please note that I'm not counting the days from the previously promised shipping dates.)
Please keep in mind that by continuously delaying the shipping of our switches, you not only piss people off, but you reflect badly on the whole group buying community that we have here. I, for one, feel reluctant to join another group buy after this experience and if others feel the same, this might hurt those that wish to participate in a group buy.
So I sincerely ask of you, get organized and get those switches shipped ASAP!!!
Best Regards
/Nakkor
Any group buy this large will take its time man, I too have not received my switches just wait it out; they will eventually get to you. I'm sure there are plenty of people in the same boat as us.
7Bit has a lot on his plate with the phantom group buy, the round four key cap buy and these switches; not to mention work and personal life.
-
Any ETA for canadian orders?
-
Switches at last
Switches at last
Thank God Almighty
Switches at last
;P
-
Didn't receive my switches.
Don't know if its just me outside the US. No notifications and no replies. I guess I won't be receiving them at all. Never gonna order from TS anymore.
-
I still haven't received mine yet either (also outside the US). I tried pm'ing 7bit first, but he hasn't been online in about a week.
-
go bug him on DT, he doesnt hang out here much
-
go bug him on DT, he doesnt hang out here much
it's pointless.. the pm was sent 1-2 months ago, unless he doesn't come GH for months.
- edit: just received the switches today. it was sent out last week :) glad that it arrived anyway. thanks.