geekhack
geekhack Community => Keyboards => Topic started by: AKIMbO on Tue, 20 March 2012, 19:29:21
-
http://www.ebay.com/itm/330705266496?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_973wt_1139
This WYSE keyboard has cherry mx keycaps right? Not the nice think doubleshots like the WYSE 60...but it still has doubleshots right?
-
Yes, it's an MX one. Even the 'thin' ones are still better than SP keycaps.
-
according to SP, they made them.
-
Oh nice...and really SP made them? Cool well I just bought one and also a WY60 ASCII 840338-01 (which is the one with the thicker doubleshots right?)
-
Ok better than CURRENT SP keycaps.
-
they look and feel no different to me
-insert any of the ripster theories here-
-
I'll take pics of keycaps from both boards when they arrive Ripster.
-
There was 3 different thickness in Wyse boards from super thick to what SP makes now. The in between thick is the most common, imagine the thickness without the blue part of the sidewall in the above picture. Thats still like 2x thick as current SP keys.
-
There was 3 different thickness in Wyse boards from super thick to what SP makes now. The in between thick is the most common, imagine the thickness without the blue part of the sidewall in the above picture. Thats still like 2x thick as current SP keys.
havent seen these super thick ones you're talking about.
i only have the medium thick and the sp thin ones
rip, what keys do you need? i'll take a picture of them right now. the SP thin ones that is
-
I just received two from that seller. Thin caps unlike my WY50 terminal board. One is in fairly clean condition the other very dirty. Both have paint splatters on several keys. You can scrape the paint off but it takes a while. I just needed the tab and ~ keys to complete my set (and the upcoming moogle kit).
-
20 years of declining quality!
-
F up, D down, S sideways (use gum or tape or putty or whatever).
(http://dl.dropbox.com/u/20408132/Kb%20pics/Photo%20Mar%2020%2C%206%2008%2013%20PM%20(1).jpg)
-
I ordered a board from him last week. It should get here this week. We'll see how it goes. I asked him to send me the nicest one he had.
-
I recieved my second Wyse today (WYSE 840358-01).
My WY60 ASCII 840338-01 had thin DS keycaps throughout the board, but my WYSE 840358-01 had thick DS arrow keys (with the remaining keys on the WYSE 840358-01 being thin DS). I'll post pics later...the WYSE 840358-01 keys are currently getting a retrobrite treatment.
-
I just bought myself one of these, but it just occurred to me that I don't particularly like beige keycaps. Oh well, at I can probably still salvage the board for switches or something.
-
Can someone confirm if these are DCS profile by comparing with other Signature Plastic keys?
(http://i43.tinypic.com/1568hes.jpg)
(http://i42.tinypic.com/1671m6r.jpg)
Left= Filco Esc key
Middle= SP Esc key
Right= WYSE Esc key