What's a candy corn esc worth(cherry mx) ? :D
Price check on original KBC poker abs caps?$10-$15
Price check on original KBC poker abs caps?
What's a candy corn esc worth(cherry mx) ? :D
What's a candy corn esc worth(cherry mx) ? :D
i was looking to trade one of these for a skull quite some time ago.
was offered $40 from kisa . ended up just selling it along with 3 skulls and my filco. @_@ i calculated it as $40 when deciding a price
Of course a buyer is going to ask for a lower price...thick, or thin?
Price check: WYSE doubleshot set
Price check: set of Ducky 104 PBT in good condition.
How much is a used model m worth? How much is the same model m NIB worth? I've seen prices from $30-$150 for the same model depending on condition.The market for Model Ms is a little lacking. Used, maybe $30-$40. NIB, maybe $70-$100? The NIBs vary widely depending on the demand.
(Attachment) 51873[/ATTACH]I think these go for somewhere around $40-$50, but I'm not sure.
PBT cap set for Poker. White on black. New in box. Price check
price check:It sounds well used. I would say probably around $100-$115 shipped.
like new Filco black Ninja 104 MX Blue with everything came with it(box, keypuller, flat Win keys...).
It only has a little wear on 'f', 'j', and 'Spacebar' keys. Located in Bay area, CA so please advise shipping cost as well.
Thanks in advance.
Have got a few new Ducky Keychain.I think that's a little pricy, but I'm no expert on the going rate of these.
Was wondering how much do they worth to resell?
I saw someone selling in classified @ 20 USD.
Is that expensive or cheap?
Not sure why those keychain sell for so much... cost of switch $3, keycap $2... wonder where Ducky had those switch base made? Something should be found out, copy it for groupbuy.
It sounds well used. I would say probably around $100-$115 shipped.
Thanks, however it's actually not well used.Maybe around $130 shipped? It all depends on condition.
It's the last Filco keyboard I bought(about 3months) and I've tried it for several times and it didn't grow on me.
The total usage is definitely less than a week since I switch keyboards about every 2 days. The blue Filco never lasted 2 days.
I am planning to sell all of my Filcos since I've already found MY favorite keyboards, HHKBs.
I will include detailed pictures when post here. Based on the additional info above, would you reconsider the price?
Thanks again.
Maybe around $130 shipped? It all depends on condition.
104 set of black engraved keys (orange esc and blue W, A, S, and D key) from WASD, light to no wearWASD: If you can find a buyer who likes your scheme, maybe $40? I think they retail for $50, so just mark it down a bit for wear.
And double shot set shown here, not a full set, again little to no wear
http://img1.uploadscreenshot.com/images/orig/5/15009212439-orig.jpg
Pc on dolch key set with out moogle kitJudging by the supply and demand, I think they've gone for somewhere around $80-$100 recently.
What are my IBM Model M 1393464s worth?
WASD: If you can find a buyer who likes your scheme, maybe $40? I think they retail for $50, so just mark it down a bit for wear.
Double Shots: The set's incomplete, and looks a bit yellowed. Maybe $20, if you can find someone after the uniqueness? What're they from?
Price Check-Maybe $30-$40, if it's in really good shape.
My friend got IBM Model-M 1391411 and hes wondering how much that sells for.
Well how much for the Filco by itself then?
15?
how much is DV caps value? is it worth to trade 2 clacks with it?
how much are click clack factory seconds compared to normal skulls?
how much are click clack factory seconds compared to normal skulls?
What does a bag of 100 cherry mx black springs go for? What about a bag of 100 cherry mx black stems?
What does a bag of 100 cherry mx black springs go for? What about a bag of 100 cherry mx black stems?
ergo clear mod on a plate mounted board?
What does a bag of 100 cherry mx black springs go for? What about a bag of 100 cherry mx black stems?I sold a set of 104 black switches for $20 shipped. Apparently I could have gotten more for them, but I didn't see the need.
ergo clear mod on a plate mounted board?I think Clickey was doing this a while ago. If you can dig up the thread, you might be able to find someone who can tell you what he charged. Maybe Reaper or DanGWanG?
PC on stock black Filco 87 keycaps set? Unused. (not ninja, normal ones)I think I've seen these go for ~$25.
How about a white Moogle modifier kit?
(Attachment) 53056[/ATTACH]
I may be wrong as to the name even, I'm just curious what these go for.
Price/Interest check on Northgate Omnikey 101, with small enter key.I think around $75-$100? Though I'm not totally sure. I haven't seen one in a while.
Review of the model: http://geekhack.org/showwiki.php?title=Island:4852
And is this normal that the keys are so stiff and hard to press anywhere but in the middle? Or is mine just old or something?They are always like that, which is why only fewer people like these boards.
Dug around a bit, found three price points.Right you are! I apologize for misleading you. I forgot how much people seem to like those cases.
Here's an ISO Model M industrial sold for the equivalent of $130.
http://www.ebay.de/itm/ws/eBayISAPI.dll?ViewItem&item=190680569735&fromMakeTrack=true&ssPageName=VIP:watchlink:top:de
Here's two standard Industrials sold for $95 and $150, respectively.
http://geekhack.org/showthread.php?30794-Yet-Another-Spring-Cleaning-Keyboard-Blowout!&highlight=Model+industrial
http://geekhack.org/showthread.php?27136-Industrial-IBM-Model-M&highlight=Model+industrial
I believe I saw a NIB one on ebay go for $170, though I can't find a link.
Seems like it's >$100 for standard Industrials.
Is trading a Cherry Black on White/Beige set for a Graphite/Black set an even(ish) trade? trying to decide whether or not to pull the trigger on it.If, when you say graphite, you mean that dark blue/gray set that shows up rarely, I can't give you a definite answer, because I don't know what those are worth monetarily (I've only ever seen them traded.) However, I personally would take that trade. If you mean a white on black cherry set, then no.
Picked up a black filco ninja TKL with blacks on Amazon. Keyboard appears to be in very good condition with all of the accessories and original packaging. I don't think black switches are for me, after trying it a bit today, my hands feel like I've been doing finger push-ups. I'm looking into replacing the switches (I own an iron and a solder sucker, only used it once), or just going with ghetto reds if switching springs doesn't require soldering.
Anyway, here're some pics, I'd appreciate a price-check on it, and is there some place to get the same keyboard with browns?
(Attachment) 53604[/ATTACH] (Attachment) 53605[/ATTACH] (Attachment) 53606[/ATTACH] (Attachment) 53607[/ATTACH] (Attachment) 53608[/ATTACH] (Attachment) 53609[/ATTACH]
I don't know how big the stock of those is.
They don't really seem that rare, so I'd guess 40-60$?
What is the value of a full set of Cherry Double shot keycaps with WYSE font.You can't have both of those things with one set. They're either Cherry doubleshots or WYSE doubleshots. Post a picture, and I can help you out.
They are a bit beige.
104 lightly used/new WYSE black switches, Theyre vintage ones right? the better of the black switches. How much for them.I sold a bunch of these for $20. I may have been able to get more if I had known they were vintage at the time, but eh.
I sold a bunch of these for $20. I may have been able to get more if I had known they were vintage at the time, but eh.
Lolwut...I have 2 bare PCBs filled with WYSE cherry mx black switches. Cuantos cuesta?I sold 104 for $20 shipped, if that's any frame of reference. I was just going with the whole black switches are kind of unpopular thing.
Do you think anyone would be interested in an IBM Model F XT which has been converted to USB and made compatible with modern PCs? How much do you think one would fetch? I had fun making mine and am looking for excuses to make more.Model Fs go for what, roughly $70? Throw a labor charge and shipping on there. How much I would say depends on the intensity of the work and how long it takes you.
I've for a Das Keyboard Professional with media keys (Blues) bought in 5/2010. It's well maintained and just has some shiny keys. I've recently bought newer keycaps (37 blanks from wasd keyboards) three months ago. The keyboard has media control keys which seems to only have been a limited thing. Ideally I'd like to switch to a TKL board with blues. Tired of that numpad yo.I think you could maybe get roughly $50-$60 for it. The recent sales of Rosewills for $60 drove down the demand for blue boards, but some people may be after the media keys.
Black filco majestouch 2?
New and used prices if you can, I can't find anywhere to buy one.
Whoops! I mean to write blue or brown switches! Trust my amazon is the first place I looked ^____^Black filco majestouch 2?
New and used prices if you can, I can't find anywhere to buy one.
not looking hard enough!
http://www.amazon.com/gp/aag/main?ie=UTF8&asin=&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&seller=A104717BI2VJF7
i stand by my suggestion.Whoops! I mean to write blue or brown switches! Trust my amazon is the first place I looked ^____^Black filco majestouch 2?
New and used prices if you can, I can't find anywhere to buy one.
not looking hard enough!
http://www.amazon.com/gp/aag/main?ie=UTF8&asin=&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&seller=A104717BI2VJF7
to me? 18, 18 and 18.what is this wizardryi stand by my suggestion.Whoops! I mean to write blue or brown switches! Trust my amazon is the first place I looked ^____^Black filco majestouch 2?what is this wizardry
New and used prices if you can, I can't find anywhere to buy one.
not looking hard enough!
http://www.amazon.com/gp/aag/main?ie=UTF8&asin=&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&seller=A104717BI2VJF7
http://www.amazon.com/gp/product/B0060J3X2C/ref=sc_pgp__m_A104717BI2VJF7_2?ie=UTF8&m=A104717BI2VJF7&n=&s=&v=glance
blue switches.
http://www.amazon.com/gp/product/B004WOF7QM/ref=sc_pgp__m_A104717BI2VJF7_11?ie=UTF8&m=A104717BI2VJF7&n=&s=&v=glance
brown switches
never doubt the power of the demik!!!to me? 18, 18 and 18.what is this wizardryi stand by my suggestion.Whoops! I mean to write blue or brown switches! Trust my amazon is the first place I looked ^____^Black filco majestouch 2?what is this wizardry
New and used prices if you can, I can't find anywhere to buy one.
not looking hard enough!
http://www.amazon.com/gp/aag/main?ie=UTF8&asin=&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&seller=A104717BI2VJF7
http://www.amazon.com/gp/product/B0060J3X2C/ref=sc_pgp__m_A104717BI2VJF7_2?ie=UTF8&m=A104717BI2VJF7&n=&s=&v=glance
blue switches.
http://www.amazon.com/gp/product/B004WOF7QM/ref=sc_pgp__m_A104717BI2VJF7_11?ie=UTF8&m=A104717BI2VJF7&n=&s=&v=glance
brown switches
Looking for a price check on 356 MX-Mini with acrylic case.
Thanks
Looking for a price check on 356 MX-Mini with acrylic case.
Thanks
Man... it's just getting passed around everywhere, isn't it? :P
Isn't that 2 different keyboards? The MX-Mini and 356mini?
$200 is the personal max I'd spend.
anything over 190-200 is too much.
hope jrock didn't take advantage of somebody.
the koreans wouldn't like that..
$400+ for Filco 104 Yellow Limited Edition - really??
http://www.ebay.com/itm/NEW-Filco-Majestouch-2-Blue-Switch-Yellow-Keys-Keyboard-Limited-Edition-RARE-/230795971873?pt=PCA_Mice_Trackballs&hash=item35bc830d21#ht_1019wt_1396
messaged him asking why he's trying to rip people off
Dear myclaim78,
I imported this from Japan for around $200+very expansive shipping. Not to mention Ebay fees. Thank you for your interest.
- acylin
Double shot cherry made RGB are impossible to find. If you get lucky to find a person that has one and is willing to sell, it will be stupid expensive due to rarity.
Dye sub cherry made rgb is around 100, if you find somebody.
Also, I got a reply from the eBay dudeQuoteDear myclaim78,
I imported this from Japan for around $200+very expansive shipping. Not to mention Ebay fees. Thank you for your interest.
- acylin
Yes, I believe cherry RGB, both of double shot and dyesub, is now trophy for keyboard players. 8-)
Double shot cherry made RGB are impossible to find. If you get lucky to find a person that has one and is willing to sell, it will be stupid expensive due to rarity.
Dye sub cherry made rgb is around 100, if you find somebody.
Also, I got a reply from the eBay dudeQuoteDear myclaim78,
I imported this from Japan for around $200+very expansive shipping. Not to mention Ebay fees. Thank you for your interest.
- acylin
Yes, I believe cherry RGB, both of double shot and dyesub, is now trophy for keyboard players. 8-)
How much for a Ducky tenkeyless with brown and blue switches, the usb connector is broken.
SSKs have been going from anywhere between 120 and 220 dollars here, depending on condition, seller, and general fickleness of the market. the really important part is the number of plastic rivets remaining, which you can see by opening up the plastic chassis with a 5.5mm nut driver, or just shaking the thing around a bit (the rivet ends that have fallen off will sound a bit like maracas.
a board that's lost a lot of rivets requires repair. otherwise, cosmetic condition and vintage are really the determinants.
at least 150. average sales have been in the 170-180 shipped range.SSKs have been going from anywhere between 120 and 220 dollars here, depending on condition, seller, and general fickleness of the market. the really important part is the number of plastic rivets remaining, which you can see by opening up the plastic chassis with a 5.5mm nut driver, or just shaking the thing around a bit (the rivet ends that have fallen off will sound a bit like maracas.
a board that's lost a lot of rivets requires repair. otherwise, cosmetic condition and vintage are really the determinants.
Vintage '93, doesn't seem to have any broken rivets.
How much are old FACIT typewriters worth, either mechanical or electrical? Someone near my old folks has like ten of them, some of which are digital and record on tape. I couldn't take of any caps while they were there so I don't know which type of switch was inside, perhaps someone here knows. I took some pics but I forgot to bring a cable to my parents so I won't be able to post them until I get home, Tuesday.
So, any ideas?
Shamrock Doubleshot -> 10 15$
Nyancat Backspace (single) -> 7$
Nyancat Set (1 backspace, 6 up trail, 7 down trail) -> 30$
How much is a:1) Apple Extended Keyboard II Model M3501 -> $20 - 30. Yours has cream Alps. The M0115, M0116, with orange or pink Alps, could be even more.
1) Apple Extended Keyboard II Model M501Show Image(https://post.craigslist.org/imagepreview/m/5L45E65Fc3Jf3N93H2c7n983e7e41c379195e.jpg)Show Image(https://post.craigslist.org/imagepreview/m/5N85F85M73La3Fc3N7c7n33bafd4afe031de1.jpg)
2) An ADB to USB adapter?
3) A Datadesk Mac 101E?
Keyswitches are the clicky white Alps.Show Image(https://post.craigslist.org/imagepreview/m/5Ie5N35Fa3I93J93Nfc7nd75c057de7cc1c1d.jpg)Show Image(https://post.craigslist.org/imagepreview/m/5Nc5F75M73Eb3m23H4c7neca06609affd1131.jpg)Show Image(https://post.craigslist.org/imagepreview/m/5L55I55Fe3F33Jf3H8c7nec76c9f8abe215be.jpg)
I am trying to find out what a couple of my items are worth.
1) FK-2001 (NIB w/ windows keys) Simplified White ALPS
2) FK-2001 (older w/o windows keys, used condition) Complicated White ALPS
3) WYSE PCE (no cable, used condition) Cherry MX Black
4) Fujistu Peerless (w/ windows keys, used condition) not sure what the switch is called5) Razer Blackwidow Ultimate (nearly new condition, still have box) Cherry MX Blue w/ O-Ring Mod-sold6) Cherry G81-3000 (Used condition, double shot key caps, 3 on top row and 9 on num pad are broken off on the switch stem) (willing to sell key caps only)-sold
7) Mitsumi (not sure if this one is worth much)
I am trying to find out what a couple of my items are worth.
1) FK-2001 (NIB w/ windows keys) Simplified White ALPS
2) FK-2001 (older w/o windows keys, used condition) Complicated White ALPS
3) WYSE PCE (no cable, used condition) Cherry MX Black
4) Fujistu Peerless (w/ windows keys, used condition) not sure what the switch is called5) Razer Blackwidow Ultimate (nearly new condition, still have box) Cherry MX Blue w/ O-Ring Mod-sold6) Cherry G81-3000 (Used condition, double shot key caps, 3 on top row and 9 on num pad are broken off on the switch stem) (willing to sell key caps only)-sold
7) Mitsumi (not sure if this one is worth much)
1) FK-2001 (NIB w/ windows keys) Simplified White ALPS -> $20 - $30. More if it has the plastic lid. The ones with blue/green ALPS could reach $70.
2) FK-2001 (older w/o windows keys, used condition) Complicated White ALPS -> same as above.
3) WYSE PCE (no cable, used condition) Cherry MX Black -> People buy it for key caps, but some try to change the controller, e.g. Teensy. They are left with lots for 'vintage' MX black switches, which you'll see for sale on GH marketplace. The double shot key caps are nice, I'm talking quality and profile. It could reach $30.
4) Fujistu Peerless (w/ windows keys, used condition) not sure what the switch is called -> Mitsumi switches. Those have membrane, some people love them, most hate them. The profile of the case is uncomfortable, higher than the standard. I saw them on eBay for $70, but I found BNIB at thrift store for $4.
7) Mitsumi (not sure if this one is worth much) -> $5
Orangesicle, dark turquiose, and mint gum green CCs?
I'm thinking of asking for $30 each, financial issues have taken a toll on me and will sell off all my unneeded keys before I start on my boards.
Orangesicle, dark turquiose, and mint gum green CCs?
I'm thinking of asking for $30 each, financial issues have taken a toll on me and will sell off all my unneeded keys before I start on my boards.
Orangesicle, dark turquiose, and mint gum green CCs?
I'm thinking of asking for $30 each, financial issues have taken a toll on me and will sell off all my unneeded keys before I start on my boards.
How much did you pay for them originally?
Those are fair prices, considering what they sell for from the manufacturer/distributor. Others will try to convince you otherwise, and want to bid outrageous amounts for them.
I'm desperate right now dude, but I know how this community feels about bidding.
Any thoughts on a year-old Filco MJ1 TKL with browns? Original keycaps are worn on the C/V/B/N/M keys.
Also have a set of stock, brand-new Ninja keycaps that can be bundled or sold separately.
Thanks!
How much did you pay for them originally?
About 13 to 15 dollars.
EDIT: Does eBay have an amount of viewers looking for CCs?
Those are fair prices, considering what they sell for from the manufacturer/distributor. Others will try to convince you otherwise, and want to bid outrageous amounts for them.
I'm desperate right now dude, but I know how this community feels about bidding.
You can post a link to your eBay auctions here in the Classifieds. WhiskerBox did it, and took zero flak for it.
Hi! anyone care to help with value on this:
KBC Poker with Cherry MX Red and ABS Keycaps?
In pretty much perfect condition, have been using PBT Keycaps on it but I'd like to keep them for my replacement keyboard.
100$.oh cool, that's more than I expected. I'll try to get it sold for around there then! Thanks!
100$.oh cool, that's more than I expected. I'll try to get it sold for around there then! Thanks!
Ehrr, maybe a bit less actually. It will depend on who actually wants one.
But red pokers are out of stock and will not be made anymore. You only find some brown ones.
500? LOL
What you are going to get is a number that someone pull, from who knows where (They are base on pure speculation). The only solid value that you may get is the value of your hhkb pro 2
^ Since when he became an authority on the subject. The prices are just floating and a very good example is what happen with the latest eBay sales. But maybe we have some people from wallstreet capable to predict the future
^ Since when he became an authority on the subject. The prices are just floating and a very good example is what happen with the latest eBay sales. But maybe we have some people from wallstreet capable to predict the future
^ Since when he became an authority on the subject. The prices are just floating and a very good example is what happen with the latest eBay sales. But maybe we have some people from wallstreet capable to predict the future
I have 4 guys that know every single CC trade that I ever made and they are more than happy to post. But I have not ask them. So your BS is not base on facts, What I post in your subforum was the same kind of BS that you post.
Please refrain from mentioning me ever again. That is the authority, or would you like a reminder?
Either you do not have to read or you did not read my previous post. I said that the prices are floating and a good example are the latest ebay sales. I never said anything about my own guess.
Either you do not have to read or you did not read my previous post. I said that the prices are floating and a good example are the latest ebay sales. I never said anything about my own guess.
He asked for a price quote, and every time someone comes in this particular forum and ask for a quote, you give them the same 'it's a mystery!!!' answer. It's not a mystery, so give them a price or don't bother commenting. They asked for help, not more confusion.
Jdcarpe mentioned DanGWanG because he has a reputation for being an honest trader, unlike some people...
First of all, I sold my keyboard that you seem to be referring to at current US market value, and they pointed out that it was high in their market. Nobody was ripping anyone off. Also, I was open with my prices, not making ripoff deals behind the scenes like you.
^ I have not deal with you and I have not sell you anything. I have not seen a single person that I trade/sale buy ever complain. You on the other hand have a not very placent reputation in Deskthority.
Trying to reap off the guys over there
You do know nothing about my trades, because I am not post them.
Just for reference I traded 7 keycaps for darth vader ;-). You will have to start begging someone else to sell his darth vader
Sorry there were not 7 for Darth Vader I traded 9.
I highly recommend you stay away from asking about CC key appraisals as they tend to be a bit controversial. If you really don't know what to ask for it, put it up for auction. Posts pertaining to them in this thread will likely be deleted. Thanks!(http://cdn.memegenerator.net/instances/250x250/25019511.jpg)
DanW you are so immature or so Stupid. Who will trade me 7 keycaps for darthvader. noboby unless has been party with mr. junky (DW). The last DV that I had, was trade it to Jesuswasa zombi for 1 yes 1 keycap and the other the same
yuuuuupShow Image(http://guycodeblog.mtv.com/wp-content/uploads/2011/08/micheal-jackson-eating-popcorn-theater-gif.gif)
Tri-force modifiers were originally made available to GB investors for $7, I think. Given some inflation rates, standard SP modifier, uncommon rarity, etc etc. I'd say a fair price would be in the $10-13 range.Ok cool, thanks Dan.
Tri-force modifiers were originally made available to GB investors for $7, I think. Given some inflation rates, standard SP modifier, uncommon rarity, etc etc. I'd say a fair price would be in the $10-13 range.Ok cool, thanks Dan.
If anyone has one they would be willing to sell, I'll pay well over the market clearing price. I'll offer $20 plus shipping costs. Just goes to show how badly I want one.
i sold one to him this past week, im holding onto my 2nd one...why? i dunno, just collection i guess haha.Indeed. I only want a second one so I can replace both the Windows keys on my Ducky DK1087. And plus, I am a huge Zelda fan. ^-^
Looks cooler unsymmetrical!non-symmetrical keyboard lay outs are works of the devil!
non-symmetrical keyboard lay outs are works of the devil!I agree.
Looks cooler unsymmetrical!non-symmetrical keyboard lay outs are works of the devil!
Korean set. Brand new and never used.
http://geekhack.org/index.php?topic=32032.0;topicseen
Un-used poker ABS set?
I have to many sets (or too few keyboards, depends on how I look at it :D)
barely used 8 month old Filco MJ2 TKL with cherry MX blue.
A basically new (used for about fifteen minutes) light beige filco 104 keyset?
Poker with blues, grey treble MK1 aluminium case and the Red Alert base set.
dvdhsu, if you want to sell it quick 250. I personally don't think that all the extra colored bits add much value but someone looking for that specific setup in terms of black case and white keys etc might feel otherwise.
Isn't the general rule that things depreciate to about 3/4 what they retail for once used?
Price check on a complete set of CC's? ;D
$80-90
I highly recommend you stay away from asking about CC key appraisals as they tend to be a bit controversial. If you really don't know what to ask for it, put it up for auction. Posts pertaining to them in this thread will likely be deleted. Thanks!
@ projectDim askin opinion on trades, not what its worth, figured that would be okI highly recommend you stay away from asking about CC key appraisals as they tend to be a bit controversial. If you really don't know what to ask for it, put it up for auction. Posts pertaining to them in this thread will likely be deleted. Thanks!
Used CM Storm Quickfire Rapid w/MX blues. What's it worth?
How much for a used (but very good condition) Das Keyboard Ultimate Silent ? (blank keycaps, MX-Brown switches)
How much for a used (but very good condition) Das Keyboard Ultimate Silent ? (blank keycaps, MX-Brown switches)
There's another one for sale right now for $100 shipped.
They were on sale on last week for $85 new...just a point of reference :)
What would be a reasonable price for a used G80-2100 HCD? Functioning well. The cherry logo key is missing, but all others are still available.
[...]I've sent the keypuller too to that guy. The keycaps, stoppers and keypuller.[...]
I could swear javifast said he JUST sold you his set of raptor K1 glowcaps... Selling them already?Quote from: javifast[...]I've sent the keypuller too to that guy. The keycaps, stoppers and keypuller.[...]
I would take the metal keypuller if you want to sell that.
How much would that be then for the cherry metal keypuller? I've gotten things of similar size and shape for 99cents including shipping from china, so the postage should be dirt cheap.
20 shipped for 8 golwcaps, 7 keyblockers, and the metal keypuller right? I have 8 new glowcaps and keyblockers coming for 22 shipped.
Au Contraire!
It will be hard to get more than somewhere around $85 shipped or so for a Majestouch-1 with MX blacks. No one here really likes those switches much, it seems.
Linux. Thanks for the link, looks fairly non-trivial - have you tried this? Before I head down that road, I need to ascertain the value in it's current condition.No I haven't but fossala already tried, you can reach him at http://deskthority.net/
Linux. Thanks for the link, looks fairly non-trivial - have you tried this? Before I head down that road, I need to ascertain the value in it's current condition.No I haven't but fossala already tried, you can reach him at http://deskthority.net/
Because if you have linux, you can try :Linux. Thanks for the link, looks fairly non-trivial - have you tried this? Before I head down that road, I need to ascertain the value in it's current condition.No I haven't but fossala already tried, you can reach him at http://deskthority.net/
Awesome - I will check into it. Was there a reason you asked about OS?
Because if you have linux, you can try :Linux. Thanks for the link, looks fairly non-trivial - have you tried this? Before I head down that road, I need to ascertain the value in it's current condition.No I haven't but fossala already tried, you can reach him at http://deskthority.net/
Awesome - I will check into it. Was there a reason you asked about OS?
0) lsusb
1) plug your keyboard
2) lsusb (compare against 0)
3) dmesg (look for your device)
4) Try different usb port and cable(retry 0-3)
5) Try different computer and port (retry 0-3)
NOTE: I do not think is this but you never know. Take a look at /etc/udev/rules.d directory, make sure that you are not defining a particular rule for your hhkb. You can take a look at this site for some extra info. http://www.reactivated.net/writing_udev_rules.html
If you still not been able to see your keyboard, I guess something in the electronics is bad.
P.S Some guys made the tenssy modification already, it may be possible that they may consider selling the hhkb controller.
Did you try to resolder the USB connector? Mine started causing problems after 3 or 4 years. It started to drop connection if I move around the keyboard. I fixed it by touching the solder joint of the usb connector with hot iron and the problems went away. The mini-usb connectors in general are not that strong, so it could be that the connector is broken.
If the board is working again, I would value it around $150~180. That is how much I would want if I sold mine. If it cannot be fixed, probably $50~100? There is a lot of uncertainty as to what is wrong with the busted HHKB. If replacing the controller is going to fix the problem, then $100 seems to be fair given that condition of the caps are great shape.
Can't put a value on art..
how much would a topre click clack with 3d glasses that hasn't been used be worth?
how much are CCnG base + tsangan sets going for?
Hi guys :)Is the SSK bolt modded ? Do you hear a rattle sound when you shake it ?
Looking for an estimation on two (three ?) of my Boards please :
# IBM Model M SSK
ANSI Layout, perfectly working, but a few "strokes" (not sure if that's what I really mean, will post pictures of those) on it.
Otherwise, the keyboard is in pretty good shape. No box.
# Leopold FC200R, MX Red, perfect shape and perfectly working.
No keycap or a set of Black Filco keycaps, with a Ctrl key quite "erased". With box.
# Maybe RealForce 91-UBK, perfect shape and perfectly working. Variable one.
Full set of black keycaps, maybe a CC 3D with it. No box.
Thanks for your help ;)
I'm deciding whether to sell my Filco Majestouch FKB104/EB US ASCII layout, it has a broken 'x' key. Most likely a solder issue. i want to know the value of it. Or whether if i should buy a soldering iron/solder wick and fix it myself and keep it alongside with my topre. The filco keyboard had less than 2 weeks use, no shine on any keys whatsoever. If it makes any difference, it's entirely blank default set of keycaps.
I'm deciding whether to sell my Filco Majestouch FKB104/EB US ASCII layout, it has a broken 'x' key. Most likely a solder issue. i want to know the value of it. Or whether if i should buy a soldering iron/solder wick and fix it myself and keep it alongside with my topre. The filco keyboard had less than 2 weeks use, no shine on any keys whatsoever. If it makes any difference, it's entirely blank default set of keycaps.
Why not return it, 2 week should still be in it's warranty?
How much for a Filco Majestouch 104 with browns? Since I bought it EK no longer carries Filcos so I am not sure what they are going for. Plus, not a lot of people selling full size keyboards these days.
Just thinking of finally going with TKL.
Not sure how much the NCR G80-0391 in the pic worth.
Made in west Germany in 1987.
w/ DS keycaps and red LEDs.
Black switch.
Nearly brand new, but the original box and manuals were lost.
Nobody has any clue on the Blue Alps Leading Edge Model D? Looks like this --->Show Image(http://upload.wikimedia.org/wikipedia/commons/thumb/e/e6/LeadingEdgeModelD.jpg/716px-LeadingEdgeModelD.jpg)
Not my picture, and only the keyboard.
Not sure how much the NCR G80-0391 in the pic worth.
Made in west Germany in 1987.
w/ DS keycaps and red LEDs.
Black switch.
Nearly brand new, but the original box and manuals were lost.
Whatever it's worth, that is really nice. Is that capslock center stemmed?
Nobody has any clue on the Blue Alps Leading Edge Model D? Looks like this --->Show Image(http://upload.wikimedia.org/wikipedia/commons/thumb/e/e6/LeadingEdgeModelD.jpg/716px-LeadingEdgeModelD.jpg)
Not my picture, and only the keyboard.
I've seen this board sell on ebay for around $50, and more recently on GH for $60.
How much for a Filco Majestouch 104 with browns? Since I bought it EK no longer carries Filcos so I am not sure what they are going for. Plus, not a lot of people selling full size keyboards these days.
Just thinking of finally going with TKL.
If you bought it off EK, it must be roughly a 2 year old keyboard and Majestouch 1, right? Depending on condition, it's probably worth anywhere from $70-100.
How much for a Filco Majestouch 104-key "Otaku" NKRO (cherry mx blues) in mint condition?
Excellent condition ISM SSK?
Excellent condition ISM SSK?
Selling it already? Just the SSK....$170-185 shipped.
Auction = people will pay much higher than it's market value, just because it's an auction.
I have some Double shot cherry keycaps. How much are can I get for them?Details help. A picture of the set fully laid out, or the board they came off of might be useful.
I have some Double shot cherry keycaps. How much are can I get for them?Details help. A picture of the set fully laid out, or the board they came off of might be useful.
Oh, well whatever they were from I still say $25 for max price.
(NOT SELLING, so don't PM me)
How much does an original yellow CC go for? I have one of the ones that aren't F2's.
I'm not quite sure but when you find out shoot me a PM with your price since they sound cool:) Also are these thin or thick?
thin probably 35 max IF they are pretty much in NIB condition
moogle kit was 18 and change iirc
i'd say no more than $50 if all the keys are fully textured, non yellowed.
Leopold FC700R White with browns, just checking because thinking about swapping it around for something different. As new condition.You could try ~$120-$130, but I don't know how it will go- I think you'd have better luck with the grey/black one.
Why better luck with grey/black? I love my white Leopold.Leopold FC700R White with browns, just checking because thinking about swapping it around for something different. As new condition.You could try ~$120-$130, but I don't know how it will go- I think you'd have better luck with the grey/black one.
RGB-Y set with white legends?
I have a friend who somehow managed to shock both of his Das Keyboards (MX Brown) keyboards and now certain keys don't work. He is going to try and fix at least one of them but he is curious as to how much he could make off of the switches, cables, and keycaps.Das's and browns are fairly common- and broken ones demand even less. The keycaps, if well used, are not worth much, maybe $20. The switches, maybe about the same, if he desoldered them all. Maybe $30-$40 tops. The rest of it? Probably better off saving it for some silly projects in the future.
He has owned them for about a year and a half. His work one has seen a lot of use (Shiney Keycaps) but his home one is still in really good condition (Less shiney, but still kind of shiney).
How much could he get?
How much are F2 Red CC worth? And what about Octopink WASD cluster, where can I get them and how much they are worth?
How much are F2 Red CC worth? And what about Octopink WASD cluster, where can I get them and how much they are worth?
You were the final bidder in my auction:
#9 Red Factory Secong Click Clack (MX) $60 akuJIWA
But since you never paid, maybe it's only worth $55.
How much is a TG3 BL82-5RBUVS worth? Found one on ebay.. brand new, $50 for it and $50.55 postage on top.. Is it worth that much? Or can anyone recommend a nice small keyboard similar to it.. not too worried if it is backlit or not. I would prefer red switches, but this is black.. Actually, just found it somewhere for $80ish delivered..They show up for $30-$40 shipped within the US from time to time.
What's cherry mx ds rgb keycaps worth?
Probably about $110 shipped. Black switch Filcos are not in demand at all.He might need to take a bigger hit than that on it. Since the white one is $130 (http://www.amazon.com/Filco-Majestouch-2-Tenkeyless-Keyboard-FKBN87ML/dp/B005JC4QLS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1352381433&sr=1-3) at the moment. Just my opinion though.
Filco TKL with black MX switches? It's only a couple months old.
...the white one is $139 (http://www.amazon.com/Filco-Majestouch-2-Tenkeyless-Keyboard-FKBN87ML/dp/B005JC4QLS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1352381433&sr=1-3) at the moment.
Filco TKL with black MX switches? It's only a couple months old.
As a general rule of thumb I have found that one can usually get a buyer for a lightly used keyboard with a 20% discount off of an online retail price. So $110 shipped is a reasonable price for that keyboard.Quote from: SF...the white one is $139 (http://www.amazon.com/Filco-Majestouch-2-Tenkeyless-Keyboard-FKBN87ML/dp/B005JC4QLS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1352381433&sr=1-3) at the moment.
FTFY
How much is this topre worth.... Model number is a tough one & doesnt match anything I have been able to identify. Board is in good shape, but as you can see in the pictures its missing a some keycaps.
http://imgur.com/a/xKGBq
How much is this topre worth.... Model number is a tough one & doesnt match anything I have been able to identify. Board is in good shape, but as you can see in the pictures its missing a some keycaps.
http://imgur.com/a/xKGBq
That's a toughy. ~$45-50? Others please help.
Hi,
I want to sell mi Topre 10th anniversary 55 g. I used it for three months and its in perfect condition, the PCB its from other Topre because i wanted to have uniform 55g. Hope someone can give me a sell price
how much would a dolch keycap set cost? the round 3 replicasfair dolch cost is 60-80, real world dolch cost is 100-150 depending on condition + if you have moogle kit
how much would a dolch keycap set cost? the round 3 replicasfair dolch cost is 60-80, real world dolch cost is 100-150 depending on condition + if you have moogle kit
round3 set is not dolch, similar colors but entirely different legends. probably 50-100 depending on how many addon kits, if you have all of them it could easily be 200+. not sure if there are more kits in r4 round3 than in the original round3 though.
how much would a dolch keycap set cost? the round 3 replicasfair dolch cost is 60-80, real world dolch cost is 100-150 depending on condition + if you have moogle kit
round3 set is not dolch, similar colors but entirely different legends. probably 50-100 depending on how many addon kits, if you have all of them it could easily be 200+. not sure if there are more kits in r4 round3 than in the original round3 though.
what's the diff between fair dolch and real world dolch?
I really like the colour scheme of the dolch man.
Well they weren't regularly going for $500 +. But they still weren't super cheap for ANSI. Only the Russian ones were really expensive. ISO DE you could get for like $10 for example though. I got 2 'incomplete' set of dyesub off typewriters for practically nothing.typewriter sets are definitely different.
Well they weren't regularly going for $500 +. But they still weren't super cheap for ANSI. Only the Russian ones were really expensive. ISO DE you could get for like $10 for example though. I got 2 'incomplete' set of dyesub off typewriters for practically nothing.Russian set goes for $400-$500 I was sad I let one slipped out of my hands ;_;
Looking for a price check on a Filco Majestouch 1 TKL w/ Cherry MX Blacks. Excellent condition and comes with lavender WASD keys and original Filco box (with all accessories i.e. usb converter, red escape key). Will post pics later. Thanks.
lol upside-down wtf?lol my bad...
Anybody have an estimate of what I could get for a two month old Filco MJ2 Ninja 104 w/ browns? I've done a detachable mini-usb mod to it if that matters for anything. No shine on the keycaps.
Anybody have an estimate of what I could get for a two month old Filco MJ2 Ninja 104 w/ browns? I've done a detachable mini-usb mod to it if that matters for anything. No shine on the keycaps.
Can I get a price check on a vintage Red Cherry ESC? Anyone?
I grabbed this puppy from a Thrift store and I was wondering what it is worth. Not sure what the switch type is (it resembles a buckling spring) and it has some pretty interesting keys.That's a Peerless switch, those white inserts aren't supposed to pop off when a cap is pulled. I have one, they're a distinct taste for sure. Not sure the price on a Vintage one like that...
I just got these two items in a pair. How much are they worth?About $15-20 each.
any one interested in razer widow ultimate 2012 version?
how much does it worth???
Price checking for brand new Filco
MJ2 Multicam 104 MX brown
MJ2 Ninja 104 MX red
MJ2 Limit edition yellowtop MX black
Thanks
Still need a PC on that Gray MX Red LEOPOLD FC700R. :3 plz and ty.I'd say about $100ish, IMO. Maybe $110 since it's hard to find in America.
I have a fried RK9000BR, what could I sell it for?
Also the 0 key on the numpad is snapped off.
I have a fried RK9000BR, what could I sell it for?
Also the 0 key on the numpad is snapped off.
Welcome to Geekhack!
Fried Rosewill? Well, since you can find these on sale for $65 shipped brand new, and the person who buys it will have to pay around $15 in shipping to get it from you, I would say around $20 plus shipping would be fair for a parts board. The pad printed ABS key caps aren't going to fetch much, if anything, so really the only value here is for the switches, which will have to be desoldered.
Did you spill something on it? Did the USB connector fall off?
Anyway, I'm interested if you think my value assessment is fair. You can PM me.
I want to Price Check
the new Depth Black MX CC
and the 3D MX CC
I want to Price Check
the new Depth Black MX CC
and the 3D MX CC
$18
$30
/snark
Leopold FC200RT, MX Cherry Brown, black TKL chassis
Original box, PS2/USB adapter, stock black caps, ~125 50A o rings, white Filco Ninja keycaps, lavender WASD
Anyone have an idea what I should ask for? Really hankering for something Topre to try.
^^^Interested in selling that Yellow Filco?
Can I check the price range for bro caps?
thanks any idea on the range of prices in the aftermarket?Can I check the price range for bro caps?
They were sold for $30-$35 on techkeys and some were 1 offs
thanks any idea on the range of prices in the aftermarket?Can I check the price range for bro caps?
They were sold for $30-$35 on techkeys and some were 1 offs
thanks any idea on the range of prices in the aftermarket?Can I check the price range for bro caps?
They were sold for $30-$35 on techkeys and some were 1 offs
Ideally yes, but realistically more like 60-100+ depending on the seller and the bro-bot.thanks any idea on the range of prices in the aftermarket?Can I check the price range for bro caps?
They were sold for $30-$35 on techkeys and some were 1 offs
$30-$35 ideally :/
Wanna check some price:
1) Dolch keyboard with vintage blue switches without keycaps.
2) Dolch keyset
I wish I could afford that right now... I think it's worth $150-175 to a Cherry collector... could be worth a LOT more to an Amiga collector though. It's a quite rare variation of the G80-077X.
what can i say, im poor.
Hey guys
have here a Clack Factory Candy Corn Skull Keycap for Cherry MX, bought it and i dont really like how it looks on my keyboard.
what sort of price would it see on GH at auction?
At auction?
/me le sigh.
Then why did you buy it..
How many more of these greedy resellers are there :/
Seems like they are the only ones who won the damned lottery.
Oh fate, why must you be so cruel to us, us good and honest folk.
what can i say, im poor.But, still in his Original Post, it states his other reasons for reselling the 'Cap. And the post hasn't been edited at all to show a change.
You see, the fact is, we wouldn't mind if they didn't make up some lame excuse.
If they just stated plainly that they were selling it, or in this case, asking how much it would sell for, we wouldn't care so much. But instead, these resellers, more often than not, both on GH and DT, create some type of explanation why they might have to sell it. If it is a legitimate reason, it's understandable, but again, those are few and far between. I am not trying to give the man a hard time, just humbly asking him to say it like it is, that he wants the money. I mean you can tell from the pictures provided what the KeyCap looks like... so saying that you don't like the look of it is a superficial excuse.
Sorry for the rant... :\
Edit:
Here the man showed that he wanted the money↓what can i say, im poor.But, still in his Original Post, it states his other reasons for reselling the 'Cap. And the post hasn't been edited at all to show a change.
Hey guys
have here a Clack Factory Candy Corn Skull Keycap for Cherry MX, bought it and i dont really like how it looks on my keyboard.
what sort of price would it see on GH at auction?
Because it hurts us as a community every time someone does this, that's why. We're not whining or complaining because we couldn't get one at cost, and now someone is selling for the highest bid. We are trying to keep this community free from rampant profiteering. We should be helping each other, rather than trying to make a profit off of another member, even if that member is willing to pay. Join discussions, design new ideas, create something, help noobs learn about this hobby. All of that is what this community is about. Not making a quick buck because of limited supply and high demand.
From what I've seen it doesen't matter if people come up with a lame excuse or not, it's more of, "Oh, you are a senior member, sell your clacks for $100 each" or "Oh, you're just some new guy who bought a clack to re-sell it, if you sell it for more than $10 I'm going to continually harrass you until you do." Which is why people make up 'lame excuses' to hopefully alleviate people continually attacking them for selling something that THEY own. This guy didn't even come up with some stupid excuse like "Oh my fish has cancer, I need to sell stuff for fish chemotherapy" he straight up said he wanted to sell it because he didn't like it, then when someone complained about him wanting to auction it, he just made an offhand comment about how he's poor, probably trying to just lighten the mood, but instead you guys are using it against him claiming hes only selling for the money, which why else do people sell things.........I disagree. His explanation of not "liking how it looked" was a very lame excuse. You can clearly see in the images provided how the Clack looks before you buy it. I don't think the CC changed colors while in the shipping process. So that is definitely a lame excuse. And as previously stated, I personally would not care so much (and I'm sure others wouldn't care so much either), if the man clearly stated that he is looking to sell the Clack, and not give a half-ass reason as to why. Also, I don't expect the guy to sell the Clack at cost, and wouldn't mind him selling it at what it would normally go for here, all I ask is that he isn't so sneaky about it.
I dunno guys, this whole forum is full of people that are just here to make the next quick buck, from noobs to veteran members...And I haven't really seen any veterans purchasing a Clack, and then immediately selling it after. If I'm wrong though, please correct me.
Hey guysI think it would probably go for something in-between 100-160 USD.
have here a Clack Factory Candy Corn Skull Keycap for Cherry MX, bought it and i dont really like how it looks on my keyboard.
what sort of price would it see on GH at auction?
I disagree. His explanation of not "liking how it looked" was a very lame excuse. You can clearly see in the images provided how the Clack looks before you buy it. I don't think the CC changed colors while in the shipping process. So that is definitely a lame excuse. And as previously stated, I personally would not care so much (and I'm sure others wouldn't care so much either), if the man clearly stated that he is looking to sell the Clack, and not give a half-ass reason as to why. Also, I don't expect the guy to sell the Clack at cost, and wouldn't mind him selling it at what it would normally go for here, all I ask is that he isn't so sneaky about it.
And I haven't really seen any veterans purchasing a Clack, and then immediately selling it after. If I'm wrong though, please correct me.
What I was talking about with vets, isn't Clack's but other artificially "rare" keyboard related things. :rolleyes:
Forgive me here, as I tend to keep my tongue out of Clack price discussions in general, but I disagree with it being a lame excuse. I've bought Clacks before, only to find out after having them that I don't want them, so I can see where he might be coming from if that's his true reasoning.
Okay maybe others would care, but I personally would not. Also, I said he is being sneaky because he tries to hide the true purpose\reason for selling his 'Cap with an excuse. Bleh it isn't such a big deal, and I feel bad for the guy. This whole discussion kind of exploded, more so than I hoped.I disagree. His explanation of not "liking how it looked" was a very lame excuse. You can clearly see in the images provided how the Clack looks before you buy it. I don't think the CC changed colors while in the shipping process. So that is definitely a lame excuse. And as previously stated, I personally would not care so much (and I'm sure others wouldn't care so much either), if the man clearly stated that he is looking to sell the Clack, and not give a half-ass reason as to why. Also, I don't expect the guy to sell the Clack at cost, and wouldn't mind him selling it at what it would normally go for here, all I ask is that he isn't so sneaky about it.
And I haven't really seen any veterans purchasing a Clack, and then immediately selling it after. If I'm wrong though, please correct me.
Fair enough, it's a lame excuse. But I can see how something would look different than online. However I HIGHLY disagree with the "others wouldn't care .. if he clearly stated he is trying to sell it" I think that would have brought even more grief from people since he's a new person trying to flip a clack. Also I don't see how he's being sneaky, he just asked what it would go for, which you finally answered :))
What I was talking about with vets, isn't Clack's but other artificially "rare" keyboard related things. :rolleyes:And yeah, I agree some veterans have sold these things. But usually not so soon after receiving them.
Forgive me here, as I tend to keep my tongue out of Clack price discussions in general, but I disagree with it being a lame excuse. I've bought Clacks before, only to find out after having them that I don't want them, so I can see where he might be coming from if that's his true reasoning.Yeah, maybe I was a little too harsh with the "lame excuse" rant. I mean we all know what it feels like to love something one minute, and to hate it the next.
Wouldn't mind with people selling the CC's, it's their CC after all.
Wouldn't mind with people selling the CC's, it's their CC after all.
Theres a blue MX CC auction now, grab it while its yours :p
Hi guys. Can I get a price check on a Filco Majestouch 2 87 key Ergo Clear (modded by Bro MMB)
Key caps are PBT black engraved. I'm trying to sell this locally to a couple of friends here in the Philippines before I fly back to the US in the next 2 weeks.
I'd say 90-110 for a used stock Filco MJ2 tenkeyless, but with those mods and such, it would probably sell for a little more. I probably wouldn't feel too bad about paying $150 for such a thing if I were looking for one. Maybe a little more depending on how much you put into it, or how good your friends are. :)
Yeah, I've seen a bunch of em sell here for $150. It's a good bet.I'd say 90-110 for a used stock Filco MJ2 tenkeyless, but with those mods and such, it would probably sell for a little more. I probably wouldn't feel too bad about paying $150 for such a thing if I were looking for one. Maybe a little more depending on how much you put into it, or how good your friends are. :)
Thanks mate! $150 was my idea too but thought it would be nice to get ideas here at geekhack.
Found a new in box IBM Model M 1391401 without cable.I doubt it's actually NIB if it doesn't have a cable. That being said, you could probably get $60 shipped out of it easily if it's actually NIB.
Factory sealed and never opened, until i opened it, Dated April 1992
I've ordered a cable off of ebay for $15 and free shipping to try it out.
It has a SDL cable port, a rectangular enter key, springs in the keys and a white/gray IBM logo in the top left hand corner.
I'd say about $35-$40. ALPS are a tough sell.
PC - Full-size Filco with MX Black switches, bought new in December, little-to-no use (no visible wear). Stock keycaps. I'm reconsidering going for a TKL, so I want to figure out if I can sell this thing at a small enough loss to make that worthwhile, or if I need to suck it up (I'm using it for gaming, and I'm reaching further for my mouse than I should be).
PC - Full-size Filco with MX Black switches, bought new in December, little-to-no use (no visible wear). Stock keycaps. I'm reconsidering going for a TKL, so I want to figure out if I can sell this thing at a small enough loss to make that worthwhile, or if I need to suck it up (I'm using it for gaming, and I'm reaching further for my mouse than I should be).
Found a new in box IBM Model M 1391401 without cable.I doubt it's actually NIB if it doesn't have a cable. That being said, you could probably get $60 shipped out of it easily if it's actually NIB.
Factory sealed and never opened, until i opened it, Dated April 1992
I've ordered a cable off of ebay for $15 and free shipping to try it out.
It has a SDL cable port, a rectangular enter key, springs in the keys and a white/gray IBM logo in the top left hand corner.
Need a price check on a Filco Zero modded to complicated orange alps.MINE!
Need a price check on a Filco Zero modded to complicated orange alps.
Need a price check on a Filco Zero modded to complicated orange alps.MINE!
Need a price check on a Filco Zero modded to complicated orange alps.MINE!
But how much!?
I got a brand new filco Majestouch 2 Ninja Cherry red tenkeyless for Christmas... I decided I still liked my brown better so I moved the ninja caps to the MX brown.
Now I have a new pristine cherry red keyboard with no key caps is it worth anything ?
I guess I could ship it with the original brown caps but a few are missing and they wouldn't be pristine like they keyboard itself
I say for brand new but no caps, retail price -$20.
What would the value of a CM QFR plate (red or black) and QFR PCB be together or separate?
What would the value of a CM QFR plate (red or black) and QFR PCB be together or separate?
Ive never sold anything online before
I have a lightly used filco keyboard tenkeyless cherry red with no keycaps(transferred the ninja caps) but I dont know how to go about selling it ...any advice ? try the classifieds here ? Im not trying to get an absurdly high price either
haters gon hate, but my candy corn skull is on ebay if anyones interested.
haters gon hate, but my candy corn skull is on ebay if anyones interested.Oh course people are going to hate with a million percent mark up D:<
haters gon hate, but my candy corn skull is on ebay if anyones interested.Aww Mike, you are just too cool.
How much would my full scarface set fetch do we think?
I'm not sure what price to put on your eternal love...
If you were the Mont Blanc pen that I wanted then I might be tempted to say yes!
We should stop cluttering this thread with talk of pens... Post some handwriting in the pens thread!Soon!
So any serious valuations on the scarface set?
Good man/girl! (Whichever you are!). What is it like?
Well I am currently torn, I might get another 149 but with the fattest nib possible for some calligraphy or I might save up for something amazing like this: [size=78%]http://www.montblanc.com/en-us/shop/writing-instruments/meisterstck/masters-for-meisterstck/porcelain-white-legrand-fountain-pen-106071.aspx (http://www.montblanc.com/en-us/shop/writing-instruments/meisterstck/masters-for-meisterstck/porcelain-white-legrand-fountain-pen-106071.aspx)[/size]
So any serious valuations on the scarface set?
Good man/girl! (Whichever you are!). What is it like?
Well I am currently torn, I might get another 149 but with the fattest nib possible for some calligraphy or I might save up for something amazing like this: [size=78%]http://www.montblanc.com/en-us/shop/writing-instruments/meisterstck/masters-for-meisterstck/porcelain-white-legrand-fountain-pen-106071.aspx (http://www.montblanc.com/en-us/shop/writing-instruments/meisterstck/masters-for-meisterstck/porcelain-white-legrand-fountain-pen-106071.aspx)[/size]
Get a older 149 with semi flex on the nib it will definitely be better for calligraphy. Not so much of a fan of the porcelain I was going to get one myself but played with one in person and didnt really do it for me, I would rather get myself another 149 then that but thats just me.
I have a year of the golden dragon MB B nib I need to sell, awesome 138 design but i need it other then a desk pen so I want to pick up a vintage 138 or a hemingway
scarface set doesnt have modifiers so its all 1x keys
That is also quite a lot less than I paid for it!
Cherry MX keychains are about $10-30 depending on the variant. Roper keychains are rare and worth what Cactux is asking in his thread, IMO.
Cherry MX keychains are about $10-30 depending on the variant. Roper keychains are rare and worth what Cactux is asking in his thread, IMO.
Thanks =D
resale value of a topre CC?
resale value of a topre CC?
That's about like asking the value of a Ford car.
Which topre CC, or at least a category, blank, single color skull, tri-color skull. We really need more information.
John
How many broken rivets?
I'd say about $45 each. What is the date on the 1996?
The 1996 was made on the same date as my birthdate :)
Isaac hoping for one on my birthdate, since I was born in '96.
Anyone got one from April fool's day '97?Stop making me feel old.. :'(
Lightly used Filco TKL Ninja without keycaps can probably fetch about $90 plus shipping.
Once you have 60 posts here, you can post a new thread in the Classifieds forum advertising it for sale.
How much would a like new Filco Ninja Majestouch-2 TKL with MX Reds go for?
Hey.. I have a full PC I need to sell. I would like to see what I could possibly get for it :) Here are the specs.
AMD Athlon II X4 640 Quad core processor
8 Gigs of DDR3 ram
Asus Nvidia GeForce 9400 GT GPU.
MSI Motherboard
250 GB HDD
650GB HDD
That's as far as I know. I honestly bought it from someone without getting the general specs.. It's done everything I need it to do though. I'm not exactly sure about the brand of ram, but it has red heat sinks on it if that helps :\ But please let me know. I'm assuming it's worth around 450-500 or so.
resale value of a topre CC?
That's about like asking the value of a Ford car.
Which topre CC, or at least a category, blank, single color skull, tri-color skull. We really need more information.
John
-Purple Skull - $110
-Black Skull - $110
-Hack Orange - $110
-Ionspheric Blue Skull - $90
-White Skull - $90
-Oktoberfest - $150
Mint Green WASD and arrow set? Never seen one for direct sale, and no I'm not selling mine(yet,) just curious.
Black IBM M13. Condition 9/10Hack orange. Could you follow the clack owners link in my sig aand take a picture of it please! It's for the wiki:)
IBM SSK. Condition 7-8/10
CC Orange for IBMs (Forgot the color name)
Thanks for the suggestion. Sure no problem, I'll get a pic tonight or tomorrow.Black IBM M13. Condition 9/10Hack orange. Could you follow the clack owners link in my sig aand take a picture of it please! It's for the wiki:)
IBM SSK. Condition 7-8/10
CC Orange for IBMs (Forgot the color name)
You could probably get $150 for the M13 and $200 for the SSK
Orange gamer set?
SP RGB set?
MiMiC Cable?
I like the blue a tiny bit better. :D
Orange gamer set?
SP RGB set?
MiMiC Cable?
Orange gamer sets are the sh!t ! Such a cool color orange, I would assume it wa worth $35-50 depending on if the set is complete and the condition.
As for the rgb set, I think it would depend on which set from SP.
Mimic cables are pretty dope so I imagine you could prolly get just about what you payed for it depending on condition.
How much for a custom built poker without a case? $175?
I was thinking of building one: Poker PCB, my plate with or without poker suits, red stems, stickered, lubed and with stock red/brown/blue springs or springs from a clear switch.
Hm, Poker is about $15, switches add $30, your plate an easy $40, so I'm gonna throw a value of ~$125-$175 on it considering the market, recent availability of Poker PCBs, and your time. Especially with those tricky stickers and lubing takes forever.
How much for a custom built poker without a case? $175?
I was thinking of building one: Poker PCB, my plate with or without poker suits, red stems, stickered, lubed and with stock red/brown/blue springs or springs from a clear switch.
Depends on how much you value your time in soldering, stickering and lubing?
But I thought they would be a bit less than $175, as everything with a Alu Case is around $200-250?
Mint condition realforce 87u all 45g
was used for one day was just shipped from EK this week
what should I ask ? somewhere around 200$ ?
also do transactions usually happen through paypal ?
Isn't it around $280 shipped in CONUS? What makes you willing to lose $80 for typing on a keyboard for 1 day? It is one of the best keyboard you can ask for in the market right now.
what should I ask for my slightly used filco tenkeyless mj2 reds
there is no keycaps with it
around 90-100 ?
what's the running rate of CCnG sets without tsangan or numpad? Around $80?That's a bit on the high side, but not unheard of to sell for that price.
how much is my custom mx-mini?
anyone interested in?
rainbow holic~~
http://i.imgur.com/9xlcrcR.jpg
http://i.imgur.com/shE9L98.jpg
http://i.imgur.com/hJJaJOW.jpg
Stock poker case?
Stock poker case?
They generally go for $15-20.
Graphite set with 1.5 bottom mods and a 7x spacebar?Didn't a set just go for about $125? I don't recall.
Price for an industrial grey model M 104? No rattling rivets ;DI'd say $150 to $200 on both of them.
1990+ model I think, need to check it when I get home.
And a SSK with no rattling rivets too....
87 brown switches desoldered from a QFRI'd say the market value on them would be about $30. Puts them at just a hair over $.34 a piece
What is the market price do you think?
Stock Filco TKL Case?I'd say about $20-$30 on the Filco case, as people are looking for them for their Phantoms.
Starcraft doubleshot esc caps?
1. NCR double shot ansi winkeyless set. condition used.1. NCR set is dye sub also, no? If so, I'd put a current value of $100 to $150 on it, if not more.
2. original cherry dye sub ansi winkeyless set. condition used, enter key faded.
3. double shot white/beige ansi winkeyless set. NIB
Realforce 45g uniform?I'd say about $200 or $225 considering the price that they sell for on EK, when they are in stock that is.
http://elitekeyboards.com/products.php?sub=topre_keyboards,rftenkeyless&pid=rf_se0900Realforce 45g uniform?I'd say about $200 or $225 considering the price that they sell for on EK, when they are in stock that is.
Realforce 45g uniform?
Realforce 45g uniform?$230 shipped...if it's in good condition still. EK is out of stock on the 45g uniform right now, so I'd expect a fairly quick sell in the classifieds.
I was actually thinking of buying one, just wondering about the price people sell for at around here
I was actually thinking of buying one, just wondering about the price people sell for at around here
That's a very good way to use this thread :)
Edit: How much would a set of Cherry plate mounted stabilizers go for?
I was actually thinking of buying one, just wondering about the price people sell for at around here
That's a very good way to use this thread :)
Edit: How much would a set of Cherry plate mounted stabilizers go for?
Is there a difference between plate and pcb mount stabs?
I was actually thinking of buying one, just wondering about the price people sell for at around here
That's a very good way to use this thread :)
Edit: How much would a set of Cherry plate mounted stabilizers go for?
Is there a difference between plate and pcb mount stabs?
Yes. One mounts only on a plate and the other on a PCB that has holes to support PCB mount cherry stabilizers
$5 check WhiskeyTango's thread Jocelyn. :)Thank you! A certain "someone" (Starts with W lol) is giving me a set and I wanted to pay him for them.
Is there a difference between plate and pcb mount stabs?
Looking for a price check on the following items:
Clack Sticky - http://imageshack.us/a/img15/3241/dsc0432ss.jpg
Clack Sticky Icky - http://imageshack.us/a/img41/1149/dsc0439wj.jpg
Clack Sticky Icky Icky - http://imageshack.us/a/img26/8413/dsc0438lm.jpg
Clack Good Times - http://imageshack.us/a/img443/7923/dsc0437yx.jpg
Clack Blank Esc Key - http://img838.imageshack.us/img838/9215/dsc0423m.jpg
Thanks!
Looking for a price check on the following items:Also, could you take pics for the wiki? Check the calling all clack owners in my signature. :D
Clack Sticky - http://imageshack.us/a/img15/3241/dsc0432ss.jpg
Clack Sticky Icky - http://imageshack.us/a/img41/1149/dsc0439wj.jpg
Clack Sticky Icky Icky - http://imageshack.us/a/img26/8413/dsc0438lm.jpg
Clack Good Times - http://imageshack.us/a/img443/7923/dsc0437yx.jpg
Clack Blank Esc Key - http://img838.imageshack.us/img838/9215/dsc0423m.jpg
Thanks!
Looking for a price check on a mint blank CC escape key - anybody?
Its MX, Topre would be on the more expensive side of that scale correct?
boost, if i've got your attention, what do you think a Sticky Icky and a Sticky Icky Icky would be worth?
they are exactly like this one :Show Image(http://www.jogis-roehrenbude.de/Roehren-Geschichtliches/Nixie/LD-911/1.jpg)
Recently came across a Focus FK2001 with what appears to be white alps. I'm not planning on selling it, but how much could I get for it if I did decide to? What about just the keycaps? They're all doubleshots with the exception of both windows keys, the key that functions as right click, and tab, for whatever reason.
Recently came across a Focus FK2001 with what appears to be white alps. I'm not planning on selling it, but how much could I get for it if I did decide to? What about just the keycaps? They're all doubleshots with the exception of both windows keys, the key that functions as right click, and tab, for whatever reason.
NIB Focus 2001, with the clear plastic dust cover yours is missing, have been going for about $50 shipped or less. That one seems to be well used. ALPS keycap sets don't sell for much if at all here. Sorry. :(
Rather than as an investment, you should use that board to type on. White clicky ALPS are fun to use. There's a reason why those Focus boards were popular back in the late 80's/early 90's.
How much do you think I could get for my Dolch PAC 62 keyboard (already converted to PS2) without keycaps?
How much is a bloodbath brobot worth?
What's the difference between a Bloodbath and a Bloodthirst? I want that translucent red one! Gupgup?
I agree.How much is a bloodbath brobot worth?
$33 :DShow Image(http://i.imgur.com/ufZKM14.png)
What is this worth: Red Alert complete set from an earlier group buy a long time ago. Brand new.
Don't even remember how much I paid for the complete set but it has the white, grey, and red modifiers.
What is this worth: Red Alert complete set from an earlier group buy a long time ago. Brand new.
Don't even remember how much I paid for the complete set but it has the white, grey, and red modifiers.
If you are talking about Red Alert 2.0 they were about $55 in the group buy but normally I see them selling for $65-75 in the classifieds.
Just arrows.
Yeah. If you lay them all out and take pictures of them so people will know what they are, you'll get a good amount of $$$ for them. I would say $200 easily.
What could be a reasonable price for:
Ducky 1087 with green ALPS.
Focus 2001 white ALPS, double shots key caps, with roof and looking like new.
2x red escape keys double shots.
2x back slash keys one double shot, one printed.
Thinking about selling my Model M. The market seems to fluctuate quite a bit on these. My particular board is in impeccable condition, no yellowing or anything like that. It is a 1391401 with a PS/2 cable. Mf'd 10SEP87. As I said, this board is really clean. Wondering what the going rate is for boards in good condition.
Just arrows.
Sounds like a Rebel Red Alert set. Does it have the contrasting white on red number row with Isotherm font? OTD "hand" keycaps? How many keycaps are there, in total? Around 170? Can you post a picture?
A full Rebel Red Alert set, with all the colorway options and experimental keys can fetch a healthy sum. I paid something like $210 for mine.
Not sure about anyone else, but I would never separate mine from the Rebel RA set.
What could be a reasonable price for:
Ducky 1087 with green ALPS.
Focus 2001 white ALPS, double shots key caps, with roof and looking like new.
2x red escape keys double shots.
2x back slash keys one double shot, one printed.
Ducky 1087 with green ALPS. $40 shipped
Focus 2001 white ALPS, double shots key caps, with roof and looking like new. $50 shipped
2x red escape keys double shots. $5 shipped (each)
2x back slash keys one double shot, one printed. $5 shipped (each)
What could be a reasonable price for:
Ducky 1087 with green ALPS.
Focus 2001 white ALPS, double shots key caps, with roof and looking like new.
2x red escape keys double shots.
2x back slash keys one double shot, one printed.
Ducky 1087 with green ALPS. $40 shipped
Focus 2001 white ALPS, double shots key caps, with roof and looking like new. $50 shipped
2x red escape keys double shots. $5 shipped (each)
2x back slash keys one double shot, one printed. $5 shipped (each)
Thank you very much for the answer. I think I can not post in the classifieds because I am a new member at GH, is there another option? or I should go somewhere else? Thank you all for your advice.
LOL yeah, just keep posting. You'll have 60 posts in a matter if days. At only 5 posts per day, it would only take you 12 days to get to 60.
Welcome to Geekhack! :)
Mmh focus in like new conditions...
Let me know when you get to 60 posts...
It was offered to me as a trade.Woah there. Where is this trade?!
Mmh focus in like new conditions...
Let me know when you get to 60 posts...
It was offered to me as a trade.Woah there. Where is this trade?!
It was offered to me as a trade.Woah there. Where is this trade?!
hehe. the guy rescinded it once he realized that CCnG was my rarest set of caps. He was looking for something more rare + cash or other caps I believe.
It was offered to me as a trade.Woah there. Where is this trade?!
hehe. the guy rescinded it once he realized that CCnG was my rarest set of caps. He was looking for something more rare + cash or other caps I believe.
Correction ;D Cos I already have a set :))Show Image(http://i.imgur.com/Yx4M92L.jpg)
Is it painted or anodized? I didn't know Vortex made a LE Pure with a black alu case.
What is that Esc key? Looks great with CCnG.
What is that Esc key? Looks great with CCnG.
Probably from Ragnorock http://geekhack.org/index.php?topic=37579.0
What would a pre-media key Das Keyboard Model S Professional with Browns go for? It also has a pair of Qwerkeys caps.
Pics: http://imgur.com/a/h0RCT
How much would a Ragnarock red on black TKL set go for nowadays?
$60-70 imo.
$60-70 imo.
That's it? :(
I thought they'd be worth a lot more than Klaxon. I guess I'll just hold on to them then.
How much would a Ragnarock red on black TKL set go for nowadays?
$60-70 imo.
Not sure about anyone else, but I would never separate mine from the Rebel RA set.
How much would a Ragnarock red on black TKL set go for nowadays?
$60-70 imo.
Oh snap, I paid $33 for a set shipped in January.
How much would a Ragnarock red on black TKL set go for nowadays?
$60-70 imo.
Oh snap, I paid $33 for a set shipped in January.
Lucky you. I paid $60 for a TKL set in February.
amd phenom x4 965 black edition 3.2ghz; 16go DDR3; Amd saphire 5770 1go GDDR 5; 1to 7200t/min; alim 80plus bronze 750w; cd drive and ANTEC case ?
amd phenom x4 965 black edition 3.2ghz; 16go DDR3; Amd saphire 5770 1go GDDR 5; 1to 7200t/min; alim 80plus bronze 750w; cd drive and ANTEC case ?
Exact model names go a long way in helping give prices. Same with whether the part has been overclocked at all, what voltages it took for the overclock, the clock speed it was at, and what stepping the CPU is. For example, a C3 stepping 965 is generally worth a little more than a C2 since they tend to overclock better. You also need to say how many sticks it is for the 16GB. Is it two sticks or four sticks? What brand 5770 and what heatsink? What brand HDD? What model case?
Are you trying to sell it as one complete computer or piece it out? If the former, you need to include the motherboard model.
When you're super vague about it and don't provide pictures, it's very difficult to give a price.
ok thanks, it was just a frien giving me specs about a computer he wanted to sell me :) might be gatting it if i manage to buy for under 450$
Just without really looking into it TOO much, I would say around $500-600?
But this is dependent on Australian prices lol
$100 CPU
$100 Ram
$100 graphics card
$50 Hard drive
$100ish PSU
$20 CD Drive (not DVD?)
$80 used Antec Case
How much would a Ragnarock red on black TKL set go for nowadays?
$60-70 imo.
Oh snap, I paid $33 for a set shipped in January.
Lucky you. I paid $60 for a TKL set in February.
Going by that, worth $90 this month!
New RF 87U 45g EK is $249. A new set of keycaps will run $110. So you should ask $139 or less?
Maybe? I would just advise to buy vintage boards like the Chicony 51*1 CT for often cheap source of vintage blues. Are they better, yes subtly much the same as vintage blacks.
Scarface WASD and ESC caps, I need some money this month!Show Image(http://farm9.staticflickr.com/8031/7939392542_5b49df7208_b.jpg)
$25 + shipping
$25 + shipping
Helpful!
what do springs typically run for brown/blue/red
what do the korean springs 62/65 usually run for
Since Originative sells Korean springs for $8+shipping (~$11) for 100, no higher than that.
What's a good condition G80-3700 with doubleshots worth these days?
What's a good condition G80-3700 with doubleshots worth these days?
$40-$60?
What's a good condition G80-3700 with doubleshots worth these days?
$40-$60?
Oh, I forgot to say, it has the cherry sticker on it! Super pretty :)
What's a good condition G80-3700 with doubleshots worth these days?
$40-$60?
surprisingly not even that much anymore. There has been one for $35+shipping for sale forever in this thread: http://geekhack.org/index.php?topic=40468.0
What's a good condition G80-3700 with doubleshots worth these days?
$40-$60?
surprisingly not even that much anymore. There has been one for $35+shipping for sale forever in this thread: http://geekhack.org/index.php?topic=40468.0
Hey! THAT's got the keycaps I've been looking for! A NumLock with LED window, and almost the the Wyse colors I'm trying to match! Looks like a black font instead of dark blue, but whatever. Did they come stock on the 10-key?
PC on razer blackwidow ultimate blue LED, barely used, cleaned monthly and never broken?
Sure, but you can't even buy stuff from Originative and there's been talk about their spring weights being incorrect. I'm not saying I'd charge more, but I think doing so would be reasonable due to supply and demand.
A lot of people want red, blue, brown, 62g, and 65g springs, while not many people have them to sell.
Awesome I was hoping to get at least half out of it :DPC on razer blackwidow ultimate blue LED, barely used, cleaned monthly and never broken?
Probably $80 shipped. They aren't very popular around here.
Oh, I forgot to say, it has the cherry sticker on it! Super pretty :)
Oh, I forgot to say, it has the cherry sticker on it! Super pretty :)
You need to charge at least +$2 for the sticker! :p
Oh, I forgot to say, it has the cherry sticker on it! Super pretty :)
You need to charge at least +$2 for the sticker! :p
Oh this ones worth a lot more than your metallic ones :D At least worth $3!!
MKC red alum space bar?
found the GB for it, $25 + ship?
MKC red alum space bar?
found the GB for it, $25 + ship?
I don't know, but I might want it if its 6.25 and cherry profile :)
What might I be able to get for a Fujitsu FKB4725? Can't find a whole lot of info on it, the switches seem rather unique.The first is a Peerless switch, most people don't like them too well. I don't mind mine, but definitely isn't my favorite. IIRC, IBM caps fit them(from Model M and F's). I'd say $20 or so, since most don't like them.
http://i.imgur.com/RIk0pod.jpg
Also, just out of curiosity, what about a Keytronic variable weight rubber dome? Using it right now and I have to admit, it feels very nice for a rubber dome.
http://i.imgur.com/RL0YIHY.jpg
What might I be able to get for a Fujitsu FKB4725? Can't find a whole lot of info on it, the switches seem rather unique.The first is a Peerless switch, most people don't like them too well. I don't mind mine, but definitely isn't my favorite. IIRC, IBM caps fit them(from Model M and F's). I'd say $20 or so, since most don't like them.
http://i.imgur.com/RIk0pod.jpg
Also, just out of curiosity, what about a Keytronic variable weight rubber dome? Using it right now and I have to admit, it feels very nice for a rubber dome.
http://i.imgur.com/RL0YIHY.jpg
The second I've not seen them before, so no price estimate.
Ask CPTBadAss if he wants it, he was looking for one. :)
$110 for a quick sale, more if you're patient :)
Edit - Did you receive your 103 yet??
I saw a CM storm quick fire rapid for sale on ebay, it is in used condition, used probably 2 to 3 months, and the seller is selling it for $60. Should I buy it?
I'm thinking of buying a HHKB Lite 2 for $100, do any of you think it's worth buying?for 100 your might aswell get a pure or a poker with actual mech switches. the lite has non mech rubber domes
Where can you get a pure or poker for 100?I'm thinking of buying a HHKB Lite 2 for $100, do any of you think it's worth buying?for 100 your might aswell get a pure or a poker with actual mech switches. the lite has non mech rubber domes
Where can you get a pure or poker for 100?I'm thinking of buying a HHKB Lite 2 for $100, do any of you think it's worth buying?for 100 your might aswell get a pure or a poker with actual mech switches. the lite has non mech rubber domes
Where can you get a pure or poker for 100?
Awww sweet thanks man!Where can you get a pure or poker for 100?
http://mechanicalkeyboards.com/search.php?keyword=pure&switch_id=ALL&size=ALL&man=ALL&key_plastic=ALL&backlit=ALL&interface=ALL&cord_length=ALL&usb_kro=ALL&ps2_kro=ALL&x=71&y=15&in_stock=on
price check on a mr Friday MX
http://www.ebay.co.uk/itm/121093098457?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649yeah, the IBM 1391406 "model M" is buckling spring (over membrane). It has 2KRO, and the spacebar is probably ABS (other keys are dyesub PBT. Some things to note
Is this BS and what should I expect to bid? Thinking of taking the plunge :rolleyes:
price check on a mr Friday MX
price check on a mr Friday MX
Very detailed response, thank you very much!http://www.ebay.co.uk/itm/121093098457?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649yeah, the IBM 1391406 "model M" is buckling spring (over membrane). It has 2KRO, and the spacebar is probably ABS (other keys are dyesub PBT. Some things to note
Is this BS and what should I expect to bid? Thinking of taking the plunge :rolleyes:
1. It's in good shape for a display model. Not too much dirt, etc.
2. on the other hand, it's missing a keycap (. on the tenkey)
3. and one of the legs is broken (You can get replacements from unicomp)
4. its from 1995, this is very new. I think unicomp started in 1996 maybe?
5. sellelr uses a horrible font in their description and refers to it as "ORIGINAL ... CLICKITY CLICK KEYBOARD" :D
All of these are factors which affect the price. I'd say only bid if you are okay with missing a keycap, don't plan to use the legs, and want a fairly clean model M.
If you're okay with doing a bit of cleaning, other (dirtier) model M's can be had for less, but if it's at 30 GBP now, I imagine it'll go higher. I don't really follow the UK ebay for IBM prices, but I have got several model M's on the US ebay for ~ $30
no, just want to know it's worth, people messing me trying to buy it already..price check on a mr Friday MX
Don't even have it, and you wanna sell it already?
Tell them its worth a Zergling plushie.no, just want to know it's worth, people messing me trying to buy it already..price check on a mr Friday MX
Don't even have it, and you wanna sell it already?
hahahahahahahTell them its worth a Zergling plushie.no, just want to know it's worth, people messing me trying to buy it already..price check on a mr Friday MX
Don't even have it, and you wanna sell it already?
I also think its worthy of a Secret Santa gift.
Dolch keyboard, no key caps. Very good condition.
A QFR with WFD's plate installed and non stock LEDs? Would come with Green switches.
Anyone know what the going rate of an MX Salute is nowadays?
white filco TKL brown????
:cool:
Anyone knows a rough price for a second-hand MX-Brown Poker? with pink on black pbt.depends on how long it's been used. Though pokers are a bit rarer now, because they don't make em anymore, and the PBT caps probably add to the value, my guess is somewhere between 100-120
Anyone know what the going rate of an MX Salute is nowadays?
Price check for my Poker X with blacks.
I have the "better" original keycaps. I believe they were made from ABS. I also have barely used white and brand new black keycaps made for the Poker from Mavs GB from about a year ago.
Could anyone tell me how much the Korean gold springs are worth?
I would also say the supply of them may cause an increase in the market value of them. Don't surprised if people want to charge more, and don't even want to sell but want to trade for other things.Of course. I was just looking for a very general value.
I would also say the supply of them may cause an increase in the market value of them. Don't surprised if people want to charge more, and don't even want to sell but want to trade for other things.
That's the thing. How can we make an estimated value when people won't sell them, or at least sell them publicly? The only I've seen around were for trading, and the trade value seems to indicate they hold them at a higher value than $8-12.Take a look in the classifieds. There are some there right now. I understand that trade value =/= cash value. Like I said I was just looking for a very general cash value.
lost eden, G80-3000H*MGB market value around $75 for average to $125 for excellent condition, though some people may pay the same price for the keycaps alone. If you go that route you can usually sell the naked board for $25-30. The clears aren't really worth any more per se, but might be to specific buyer. 11800 are not worth a lot, usually something like $20-30.
ISO winkeyless 1800 would be your best fit obviously. There are some other boards like the Alcatel MMK which have those keys and windowed keys but it have a fulltouch caps not stepped. There are some more obscure models as well, but it would be a wild goose chase to even bother making a list probably as I have not seen them for sale ever.
G80-1501HAD is probably the easiest model to find with windowed lock keys, on ebay.de pretty often.
Those dark blue legends are pretty odd Mashby. They looks like black on grey to me, although it might just be the lighting in the photos. Imsto sells these colours (http://www.aikb.cn/image/lt/%E5%8A%A0%E5%8E%9A%E9%94%AE%E5%B8%BD%E9%A2%9C%E8%89%B2%E6%A0%B7%E6%9D%BF.jpg) for $86. Since you're missing a few caps I'd say maybe $65 but since it's an obscure colour the price might be higher.
I just had a look at the closeup photo you linked in the original post. I can definitely see the blue and it really is much darker than the blue Imsto currently offers. The colour still seems a bit odd to me since Imsto has no listing of it anywhere. Where did you get them? Also, I guess you could try auctioning them off since they're pretty obscure.
Oh I see. No problem, any time. GLWS.I just had a look at the closeup photo you linked in the original post. I can definitely see the blue and it really is much darker than the blue Imsto currently offers. The colour still seems a bit odd to me since Imsto has no listing of it anywhere. Where did you get them? Also, I guess you could try auctioning them off since they're pretty obscure.
I bought a "Bizarre Key Cap Collection" from Mkawa that included a lot of key cap prototypes as well as a couple of incomplete sets and this is one of them.
I went ahead and posted a Classified listed (http://geekhack.org/index.php?topic=42905.msg870503#msg870503) for $75 shipped, no PayPal fees.
Thanks again for your input Photekq!
price check on poker pcb?
Any idea what a Yellow Realforce Keychain is worth? It's exactly like these, but the cap is Yellow: http://geekhack.org/index.php?topic=39001.msg758993
When TechKeys (http://www.techkeys.us/full-key-sets.php) sold his extras that he bought, he sold the base for $80 and the tenkeypad for $22. He also was selling them at profit for his business remember though.I feel like they are rare now so it goes higher than $80.
Show Image(http://i4.photobucket.com/albums/y146/eddie84/OCN/Mech%20keyboard%20club/The%20Cheat/DSC08527.jpg)
i was interested in getting a skywyre set but i dont know how much theyre worth. figured i'd post here to see if it's in my price range.
Soware gb price is low than gh sale price, trade with gb price is good to get that set.
The cheat GB inclued that set.
That set price not over $40 In KOREA.
You can get with original price if you trade or buy with someone who is korean.
How much would a Filco Majestouch 2 w/ Browns and no keycaps sell for here? $$$+shipping would be nice. Thank you!
How much would a Filco Majestouch 2 w/ Browns and no keycaps sell for here? $$$+shipping would be nice. Thank you!
Depends if it is fullsize, or TKL.
TKL generally retains a greater percentage of purchase price I think.
How much would a Filco Majestouch 2 w/ Browns and no keycaps sell for here? $$$+shipping would be nice. Thank you!Would also like to know this, except for a TKL.
I would be interested in a fullsize filco without caps. Where are you located for shipping?
How much would a Filco Majestouch 2 w/ Browns and no keycaps sell for here? $$$+shipping would be nice. Thank you!Would also like to know this, except for a TKL.
How much would be an almost new Quickfire TK blues(used for 5 days)?
Nah, I meant I'd like to know the value of a filco TKL with no caps.How much would a Filco Majestouch 2 w/ Browns and no keycaps sell for here? $$$+shipping would be nice. Thank you!Would also like to know this, except for a TKL.
It's a full size and in USA.
Nah, I meant I'd like to know the value of a filco TKL with no caps.
Nah, I meant I'd like to know the value of a filco TKL with no caps.
Ah~ sorry :P
How should I price my almost new QF TK blues (used for 5 days)? Can anyone give a price range? Thanks!
How much would be an almost new Quickfire TK blues(used for 5 days)?
How much would be an almost new Quickfire TK blues(used for 5 days)?
$5-10 less than you paid for it
How should I price my almost new QF TK blues (used for 5 days)? Can anyone give a price range? Thanks!
Seriously, I just answered it a page agoHow much would be an almost new Quickfire TK blues(used for 5 days)?How much would be an almost new Quickfire TK blues(used for 5 days)?
$5-10 less than you paid for it
Would you nicely give a number? like 80?
How should I price my almost new QF TK blues (used for 5 days)? Can anyone give a price range? Thanks!
Hey can someone tell me how much a dolch set is worth now a days? Thanks!seen them go from around $80 to in upwards of $100, just depends on what you can get them for.
Hey can someone tell me how much a dolch set is worth now a days? Thanks!Originative will be releasing a full Dolch 110-key set made by GMK with the original Dolch (Cherry) moulds. Because of this I would expect the price of the original sets to drop a large amount.
Hey can someone tell me how much a dolch set is worth now a days? Thanks!Originative will be releasing a full Dolch 110-key set made by GMK with the original Dolch (Cherry) moulds. Because of this I would expect the price of the original sets to drop a large amount.
ALSO: Looking for a price check on a Poker with Vintage blacks, lubed, stickered, steel case, and no caps.Going back to your old ways... le sigh. $100 to me, I'll be selling it back to its rightful owner.
ALSO: Looking for a price check on a Poker with Vintage blacks, lubed, stickered, steel case, and no caps.Going back to your old ways... le sigh. $100 to me, I'll be selling it back to its rightful owner.
Price check on a steel-plated Poker with browns and stock case and caps.
Thank you, mashby. I'd be willing to change the stem, too, if anyone wanted me to. I have Black, Clear and Blue stems besides the Browns that are in it.Price check on a steel-plated Poker with browns and stock case and caps.
New Pokers were selling for around $95 at MK.com. The fact that you've plated it adds at least $25, since most plates were about that price, so I think you could get anywhere from $125 - $150.
That Poker was Gupgup's. I believe that Rarar acquired it last weekend and is now looking to flip it already.ALSO: Looking for a price check on a Poker with Vintage blacks, lubed, stickered, steel case, and no caps.Going back to your old ways... le sigh. $100 to me, I'll be selling it back to its rightful owner.
Whatchu talkin bout fry?
wow **** you guys. not even mine yet, gupgup said its worth 300 but I wasnt sure. way to keep the lynch mob going.
FYI (not just for you-know-who), asking what something is worth here in this thread, when someone is offering that same something to you at a certain price, can be seen as a **** move. If you really don't know what the value of the item is that you're interested in, maybe you shouldn't be trying to buy it.
You honestly think thieves will take the time to steal your KEYBOARDS?!... They'll take the tower and monitor...
You honestly think thieves will take the time to steal your KEYBOARDS?!... They'll take the tower and monitor...They'd need very strong backs indeed to steal my tower (Switch 810 with watercooling... weighs about 60kg) and my monitors are on arms, bolted to the desk. :-) But yeah, I'd be fracked in a fire. >_>
You honestly think thieves will take the time to steal your KEYBOARDS?!... They'll take the tower and monitor...They'd need very strong backs indeed to steal my tower (Switch 810 with watercooling... weighs about 60kg) and my monitors are on arms, bolted to the desk. :-) But yeah, I'd be fracked in a fire. >_>
I super-glued my tower to the carpet :cool:
So, I'm a bit late with this, but I bought a Cherry G81-3000LPD (thick pbt lasered key caps, German ISO, from 1995) for ~18USD. It's not fully functional but I only wanted the key caps anyhow. :)
Do you think it was a good deal?
(Fits my Leopold ISO nicely, except the caps lock; and the bottom row of course. Much better to type than with the original caps.)
GeorgeK, I bought stock poker caps (pbt) for $35 brand new, bought used ones for $25, and also sold them again for $25 without any trouble.
OMNOMNOMNOM. How's that price for you?
OMNOMNOMNOM. How's that price for you?
Need Price check on Razer BlackWidow one Month old (only One week used). all Caps with O-rings and Red Esc from WASD + Arrows in Orange.
:eek:Need Price check on Razer BlackWidow one Month old (only One week used). all Caps with O-rings and Red Esc from WASD + Arrows in Orange.
Here? You wont sell it for more than the value of the switches, so 104x0.40 (Used) $40-ish
:eek:Need Price check on Razer BlackWidow one Month old (only One week used). all Caps with O-rings and Red Esc from WASD + Arrows in Orange.
Here? You wont sell it for more than the value of the switches, so 104x0.40 (Used) $40-ish
:rofl:
not here i know that here will be no one to buy it :p
ne i m going to sell it on E-bay ;)
My friend, your collection is indeed unusual.indeed i know :D
"Razer Black Widow | HPE 87% | FILCO Majestouch 2 | Cherry G81-3000 | Marquardt MK |"
You like Razer and Marquardt at the same time???
:D :D :D :D :D:eek:Need Price check on Razer BlackWidow one Month old (only One week used). all Caps with O-rings and Red Esc from WASD + Arrows in Orange.
Here? You wont sell it for more than the value of the switches, so 104x0.40 (Used) $40-ish
:rofl:
not here i know that here will be no one to buy it :p
ne i m going to sell it on E-bay ;)
Painted up a few keys to try some color options. Selling off the ones I didn't use. Keys are Wyse DS function row.
4 matching metallic silver over metallic blue: (was meant to replace my F5 thru F8 keys and match my Wyse setup).
(Attachment Link)
key at the top is a very dark blue under the metallic silver. It actually matches the wyse set nicely. Picture looks like black.
How much is a
Rebel Red Alert set with all extras?
Price check on a 11 month old Filco Majestouch-2 TKL MX Browns in UK ISO layout with stock printed keycaps and a 2 meter white MDPC-X sleeved cable? How much would be a reasonable price to ask (In GBP)
Price check on a 11 month old Filco Majestouch-2 TKL MX Browns in UK ISO layout with stock printed keycaps and a 2 meter white MDPC-X sleeved cable? How much would be a reasonable price to ask (In GBP)
Any ideas?
Ducky Shine 2 DK9087 TKL MX Blue with White LEDs?Any ideas here too? In USD preferably. Thanks! ;)
Ducky Shine 2 DK9087 TKL MX Blue with White LEDs?Any ideas here too? In USD preferably. Thanks! ;)
Sounds fair!Ducky Shine 2 DK9087 TKL MX Blue with White LEDs?Any ideas here too? In USD preferably. Thanks! ;)
I'd say about $100 + shipping.
Sounds fair!
Mmkay. :D Might sell to family first though. ;)Sounds fair!
GLWS! You might want to specify that all the switches click too (assuming that it does) because it seems to be an issue lately with clicky switch keyboards.
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
You selling?
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
I would pay about $55 probably.
Looking for a little guidance here, I see a lot of people offering mod services on this forum. What do you guys think it is worth if I wanted to have someone mod my QFR to add a plate to it? What do the plates typically cost? Thanks!I'd say maybe $30 for assembly and $30 for the plate, if you can find one. ;) I just bought a modded one with Greens for $140 shipped. ;)
Price for one set of thick pbt (105 key)?
What is a candy corn skull worth?It's really going to vary. $40-$150+
I would like to see a picture of a 356pad!
I thought I'd be witty and post an actual candy corn skull, but it seems that Geekhack has already taken over the candy corn section of Google Images. uh... (https://www.google.com/search?q=candy+corn+skull&aq=f&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N&tab=wi&authuser=0&ei=YfiWUZa6OYiSrAHHkYCIBw&biw=1920&bih=955&sei=aPiWUea2KabgyQGDwoDoBA)
I would like to see a picture of a 356pad!
http://imgur.com/a/1e8G8#0
I would like to see a picture of a 356pad!
http://imgur.com/a/1e8G8#0
I would like to see a picture of a 356pad!
http://imgur.com/a/1e8G8#0
Whoa, how'd I miss that. That Midas-touched Numpad.
I think those are the only case feet I don't hate.I would like to see a picture of a 356pad!
http://imgur.com/a/1e8G8#0
I would like to see a picture of a 356pad!
http://imgur.com/a/1e8G8#0
Whoa, how'd I miss that. That Midas-touched Numpad.
That's the name of a really tasty Dogfish Head beer :)
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
unused 80x clear switches and one-time-used 20x clear switches
not too sure about plate mount or pcb mount.
I paid 36 EUR for 80 new clears.
Well, how much should I pay for this guy?
They claim it is an IBM Model F AT, so it should be usable on Ps2, right? These things are rare, so I don't know how to value it, not to mention Taobao folks have a rep for creating frankenstein keyboards with parts from elsewhere so I definitely do not want to pay as much for it as something I buy from Ebay USA.
http://item.taobao.com/item.htm?spm=a1z10.3.w17-4181379585.11.AkthOF&id=12648491729&
Well, how much should I pay for this guy?
They claim it is an IBM Model F AT, so it should be usable on Ps2, right? These things are rare, so I don't know how to value it, not to mention Taobao folks have a rep for creating frankenstein keyboards with parts from elsewhere so I definitely do not want to pay as much for it as something I buy from Ebay USA.
http://item.taobao.com/item.htm?spm=a1z10.3.w17-4181379585.11.AkthOF&id=12648491729&
Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
One Thermalright HR-02 lol, j/k. It's really going to depend, but I've seen people sell them for anywhere between $40 and $150+ :p
PS - PM me with the amount you're gonna sell it for before you offer anyone else ;)
Edit - Oh and it's called Oktoberfest
Haha thanks! If I do sell it i'll give you the heads up. I have around 6 CCs and i'll probably sell 1 or 2.Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
One Thermalright HR-02 lol, j/k. It's really going to depend, but I've seen people sell them for anywhere between $40 and $150+ :p
PS - PM me with the amount you're gonna sell it for before you offer anyone else ;)
Edit - Oh and it's called Oktoberfest
Haha thanks! If I do sell it i'll give you the heads up. I have around 6 CCs and i'll probably sell 1 or 2.Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
One Thermalright HR-02 lol, j/k. It's really going to depend, but I've seen people sell them for anywhere between $40 and $150+ :p
PS - PM me with the amount you're gonna sell it for before you offer anyone else ;)
Edit - Oh and it's called Oktoberfest
Btw, Does anyone know what the CC 420 thing is worth? It's the engraved one without any coloring, just green.
Are you talking about the 420 key? I traded it for a mint MX CC so I'm not sure what the guy originally paid for. I thought the 420 keys were sold as a set.Haha thanks! If I do sell it i'll give you the heads up. I have around 6 CCs and i'll probably sell 1 or 2.Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
One Thermalright HR-02 lol, j/k. It's really going to depend, but I've seen people sell them for anywhere between $40 and $150+ :p
PS - PM me with the amount you're gonna sell it for before you offer anyone else ;)
Edit - Oh and it's called Oktoberfest
Btw, Does anyone know what the CC 420 thing is worth? It's the engraved one without any coloring, just green.
Again it depends on who you are, and who you are selling it too; I'd love to pay you what you paid for it, so $35 + postage, but you could probably get upto $50 for it if you were lucky, though they havnt long been out so they are not too valuable.
Uh im not sure exactly want you mean then, need moar pictures! :PAre you talking about the 420 key? I traded it for a mint MX CC so I'm not sure what the guy originally paid for. I thought the 420 keys were sold as a set.Haha thanks! If I do sell it i'll give you the heads up. I have around 6 CCs and i'll probably sell 1 or 2.Not sure of the exact CC name but it's an MX keycap. Anyone know what's it worth?Show Image(http://i2.photobucket.com/albums/y42/kikim85/ad3532a6-15c7-485a-8e99-b890f99995ee.jpg)
One Thermalright HR-02 lol, j/k. It's really going to depend, but I've seen people sell them for anywhere between $40 and $150+ :p
PS - PM me with the amount you're gonna sell it for before you offer anyone else ;)
Edit - Oh and it's called Oktoberfest
Btw, Does anyone know what the CC 420 thing is worth? It's the engraved one without any coloring, just green.
Again it depends on who you are, and who you are selling it too; I'd love to pay you what you paid for it, so $35 + postage, but you could probably get upto $50 for it if you were lucky, though they havnt long been out so they are not too valuable.
Again it depends on who you are, and who you are selling it too; I'd love to pay you what you paid for it, so $35 + postage, but you could probably get upto $50 for it if you were lucky, though they havnt long been out so they are not too valuable.
Hey guys,
I forgot I had these and recently found them in a box I hadn't opened since moving...what should I ask for or expect to receive if I decide to sell? I would probably want to sell all of the pieces as a group to someone who just got a hhkb and are looking for some accessories.
1, hhkb printed black keyset w/ red escape (little use, no shine on keys)
2, hhkb wooden wrist rest
3, hhkb travel bag
https://www.dropbox.com/sh/xh2xh45cmr7rmso/oNwJgMLRFI
CCnG base set.
Valentines base set + numpad + tsangan and the light pink mods. Oh and the GH key pack.
CCnG base set.
Valentines base set + numpad + tsangan and the light pink mods. Oh and the GH key pack.
I'd say $55 shipped max only because there have been brandless new ones going for about $65 shipped at times.
I'd say $55 shipped max only because there have been brandless new ones going for about $65 shipped at times.
Even with reds?
Interesting, I've only really seen them priced cheap with blues. In fact I bought a QFR with blues for $60 on Amazon and quickly returned it :p
Interesting, I've only really seen them priced cheap with blues. In fact I bought a QFR with blues for $60 on Amazon and quickly returned it :p
Because blues are terribad, huh?
Yeah, even with reds the QFR brandless can sell for about $65-75 shipped new. I got my brandless one new for $65 shipped. I'd assume that people would only pay about $55-60 for a branded used one. They can always post for a lil' higher though and hope for buyers who are in need for one fast ;)
Yeah, even with reds the QFR brandless can sell for about $65-75 shipped new. I got my brandless one new for $65 shipped. I'd assume that people would only pay about $55-60 for a branded used one. They can always post for a lil' higher though and hope for buyers who are in need for one fast ;)
Its hard to compete with Amazon :P
Yeah. Amazon has gotten pretty big over the past couple years. We're going to be buying groceries from them nationwide in a couple years. LOL JKJK :))
Yeah. Amazon has gotten pretty big over the past couple years. We're going to be buying groceries from them nationwide in a couple years. LOL JKJK :))
I buy almost ALL of our non perishable groceries from Amazon lol
Yeah. Amazon has gotten pretty big over the past couple years. We're going to be buying groceries from them nationwide in a couple years. LOL JKJK :))
I buy almost ALL of our non perishable groceries from Amazon lol
Lol! Seriously? Man, I didn't know Amazon's grocery prices were that competitive with large chain grocery stores.
PM me an offer :DCCnG base set.
Valentines base set + numpad + tsangan and the light pink mods. Oh and the GH key pack.
when you have a price in mind, pm me, im in the uk and looking for those sets
PM me an offer :DCCnG base set.
Valentines base set + numpad + tsangan and the light pink mods. Oh and the GH key pack.
when you have a price in mind, pm me, im in the uk and looking for those sets
Price check on a 11 month old Filco Majestouch-2 TKL MX Browns in UK ISO layout with stock printed keycaps and a 2 meter white MDPC-X sleeved cable? How much would be a reasonable price to ask (In GBP)
Filco Zero TKL with ANSI layout, box, and accessories. No wear on the keys, considering its at least 5 years old. ALPs have numbering on the top, but I don't know enough to determine if XM or Fukka.
I found a Cherry G83-3000SAD in the basement, rubberdome with dyesub caps in a standard 3000 case, worth more than 5$? :D
A dark templar?Deskthority.
Overall conditon is pretty good I guess, it's pretty dirty but when cleaned it should look like new.
A dark templar?<5$
Overall conditon is pretty good I guess, it's pretty dirty but when cleaned it should look like new.
Is there a market for used uTRON (http://xahlee.info/kbd/uTRON_keyboard.html)s in the US? I've had this board for about 3 months now and I think I'm ready to go back to a HHKB, but given the investment I have in this thing I'd want to get a decent amount of it back if possible. I haven't seen much discussion of this board here so I don't know how much interest there is in these.Quite a market if you were to sell it, in fact you could likely sell it above retail since nobody ever gets their hands on one. I know multiple types of people on the board would be interested between collectors, Topre enthusiasts, and ergo guys. :)
What is the cheapest i can buy a PCB + the controler and what i need it to run when i solder the switches on it of a TKL or 60% or something like this? I am considering starting a DIY board so i want to know how much it will be. If anybody from Europe is seeing this and have an extra PCB that he is willing to sell for a price that i can afford pls PM me :P
I've weaseled by for under $100 for my Phantom, and my ErgoDox and GH60 have come at no cost to me due to some trades for work.
I said what is possible if you keep your options open. I don't see any problem.I've weaseled by for under $100 for my Phantom, and my ErgoDox and GH60 have come at no cost to me due to some trades for work.
How does that help him at all? That isn't even a real answer to his question.
I've weaseled by for under $100 for my Phantom, and my ErgoDox and GH60 have come at no cost to me due to some trades for work.
How does that help him at all? That isn't even a real answer to his question.
I've weaseled by for under $100 for my Phantom, and my ErgoDox and GH60 have come at no cost to me due to some trades for work.
How does that help him at all? That isn't even a real answer to his question.
Are you surprised?
How much would a used Happy Hacking Keyboard Lite 2 sell for?
How much would a used Happy Hacking Keyboard Lite 2 sell for?
How much would a used Happy Hacking Keyboard Lite 2 sell for?
2 grass clippings and 3 dish washings.
" How does that help him at all? That isn't even a real answer to his question."
I disagree, they're nice dome boards; good for travel. New I think they're close to $50, so I'd say $20.How much would a used Happy Hacking Keyboard Lite 2 sell for?
Like $3
SmallFry, just tell them to **** off, its okay.. let it out ;)
How about this all caps geekhack key? Got it with a board, seems to be a doubleshot ABS.This cap should be around 3 to 5$ i assume.Show Image(http://imgur.com/xYmQf6R.jpg)Show Image(http://imgur.com/EWkRZ2K.jpg)Show Image(http://imgur.com/1BC4thc.jpg)
So 60% is around 15$ and how about TLK as i would prefer one like this?What is the cheapest i can buy a PCB + the controler and what i need it to run when i solder the switches on it of a TKL or 60% or something like this? I am considering starting a DIY board so i want to know how much it will be. If anybody from Europe is seeing this and have an extra PCB that he is willing to sell for a price that i can afford pls PM me :P
The 60% from the group buy costs about $15. Switches will run up to $30 for a 60%. Stabilizers will be about $6-9.
Total will come out to be $55 if you do not need a plate.
HHKB Pro 2 White with printed caps about 4 hours use? :rolleyes:
RA 2.0 RoW Alphas + mods / RoG mods / RoW/RoG/WoR Tsangan's all less than a days use?
R3 gamer set?$50 to $60.
clickclack machine green (I think) WASD kit
I need pricing on this entire list:
-IBM F122 (modded to USB and ANSI via teensy....minor blemishes on case)
-Late era IBM Model M (caps are otaku black)
R3 gamer set?$50 to $60.
R3 gamer set?$50 to $60.
I sold mine for $28. It isn't that many keys. $50 is way overpriced.
R3 gamer set?$50 to $60.
I sold mine for $28. It isn't that many keys. $50 is way overpriced.
yeah..i wouldn't pay more then $30 for one
Which color pink? Tickle me Pink, Octopink, I think there's another that I'm forgetting.
Each one will demand a premium, of course, but I've never seen a Tickle me Pink for public sale, thus they may drive a higher premium.
What would be the value of this Model-F-like-thing? http://deskthority.net/wiki/File:83key.jpg
Show Image(http://i.ebayimg.com/t/Tastatur-AT-A-2-KB-2101-2-mechanisch-mit-Klick-Cherry-MX-blau-doubleshots-/00/s/NzY4WDEwMjQ=/z/9MEAAOxy--NRs54q/$T2eC16V,!w0E9szNZI0)BRs54pp45!~~60_12.JPG)
KB2101/2. Those are doubleshots and MX blue switches. Any idea what it's worth?
PS: Also, which price would you expect for a G80-5000 at the moment (HAMDE with browns in german layout). It's new (I believe not NIB, but new).
vintage blues
G80-5000 ISO version usually go for closer to used €250-300 range, new more like start €400, so yes €100 would be a good deal.
Most recent boards I have found with what I would class as vintage era MX switch from 1991-2. Vintage blues should still be clicky though they are a bit softer but not white soft, they are just less rough feeling than todays.
G80-5000 ISO version usually go for closer to used €250-300 range, new more like start €400, so yes €100 would be a good deal.
Most recent boards I have found with what I would class as vintage era MX switch from 1991-2. Vintage blues should still be clicky though they are a bit softer but not white soft, they are just less rough feeling than todays.
Well if 91-92 is the time period than it looks like I may have some Vintage Blues to pimp out on a Poker X....if I can find a PCB.
http://imgur.com/a/fq0dB#0
Thanks IvanIvanovich.
--> @ tgujay
I've been thinking about it. They have a decent amount of shine and the spacebar, enter key, and backspace don't work on a modern keyboard (and the ctrl & alt modifiers are the 1.5x size). Every other keycap does though.
Shoot me an offer via PM and we'll see.
How much is a used QFR with green switches worth?
You should sell your teal coloured topper caps Tsangan...to me :D
You should sell your teal coloured topper caps Tsangan...to me :D
The ones at the top?Show Image(http://i.imgur.com/iKZ4B.jpg)
1. Pla poker alu housing + 38GT PCB vintage brown switch + custom fully work completed assembled by Gon
8. Imsto dyesubs blue font
You should sell your teal coloured topper caps Tsangan...to me :D
The ones at the top?Show Image(http://i.imgur.com/iKZ4B.jpg)
1. Pla poker alu housing + 38GT PCB vintage brown switch + custom fully work completed assembled by GonI don't know how to price, but do want! What color? :)
You should sell your teal coloured topper caps Tsangan...to me :D
The ones at the top?Show Image(http://i.imgur.com/iKZ4B.jpg)
How much is that realforce cap on the bottom right worth? (I want it :P)
1. Pla poker alu housing + 38GT PCB vintage brown switch + custom fully work completed assembled by GonI don't know how to price, but do want! What color? :)
You already have one, hoarder. Give someone else a chance! :P
1. Pla poker alu housing + 38GT PCB vintage brown switch + custom fully work completed assembled by GonI don't know how to price, but do want! What color? :)
You already have one, hoarder. Give someone else a chance! :P
Lol you have way more cases than me, but I'd pass to you of course ;)
Which color pink? Tickle me Pink, Octopink, I think there's another that I'm forgetting.
Each one will demand a premium, of course, but I've never seen a Tickle me Pink for public sale, thus they may drive a higher premium.
I looking for any Pink skull Topre for my birthday :(. Can you tell me the exact price :(
Which color pink? Tickle me Pink, Octopink, I think there's another that I'm forgetting.
Each one will demand a premium, of course, but I've never seen a Tickle me Pink for public sale, thus they may drive a higher premium.
I looking for any Pink skull Topre for my birthday :(. Can you tell me the exact price :(
pls help :(
price check on secondhand Cherry MX switches, any colour
eg how much are blues taken from an old board?
how much are reds taken from an old board?
how much are blacks from an old board?
102 complicated blue alps w/ qwertz double shot keycap set?
104 orange alps with keycaps?
102 complicated blue alps w/ qwertz double shot keycap set?
104 orange alps with keycaps?
Are you talking about a complete keyboard or just switches and key caps?
102 complicated blue alps w/ qwertz double shot keycap set?
104 orange alps with keycaps?
You guys are more knowledgeable than I, what's the below set of caps worth? Alpha's and numpad are double-shot and from what i've been told they are Cherry legends.Are the keys showing epic shine or is it just the flash?Show Image(http://i.imgur.com/uwjj3sU.jpg)
Kind of on the fence as to whether I want to sell at the moment, absolutely lusting after the Dolch set at Originative so these may not even go on my board!
If you can retrobright it successfully so it looks like new it may net you another $30. I guess it has MX blacks?
If you can retrobright it successfully so it looks like new it may net you another $30. I guess it has MX blacks?
MX Clear/White - not sure which.
Yeah there doesn't seem to be any tactile feel and they are silent, kind of like an MX red.
IBM Model F? The switches feel great and it's in mediocre-good condition. Some light scuffs on it.
looks like this: http://deskthority.net/w/images/9/90/IBM_Model_F_AT.jpg (http://deskthority.net/w/images/9/90/IBM_Model_F_AT.jpg)
Price check - 61 blue switches or stems (wtb)
104 Vintage Cherry MX Blacks?
Vintage blacks really are different. I have vintage blacks on brand new keyboard, like my esteemed ESA-3000HASRO among others. They are definitely noticably lighter and 'softer' smoother feeling action than new blacks made this year. Dare I say they feel even nicer than current production + lubed. If they are new vintage switch, maybe they are worth more... but I agree for used switch, it is a used switch and should be priced accordingly not considerably more as you can often pick up grimy old WY30-60 models off ebay for cheap which pretty much has vintage in them every time.
Now, if you are going for serious on vintage linear switch, the linear white/clear are where it is at. They are even nicer, in a sweet spot between old blacks and reds but super smooth.
Vintage blacks really are different. I have vintage blacks on brand new keyboard, like my esteemed ESA-3000HASRO among others. They are definitely noticably lighter and 'softer' smoother feeling action than new blacks made this year. Dare I say they feel even nicer than current production + lubed. If they are new vintage switch, maybe they are worth more... but I agree for used switch, it is a used switch and should be priced accordingly not considerably more as you can often pick up grimy old WY30-60 models off ebay for cheap which pretty much has vintage in them every time.
Now, if you are going for serious on vintage linear switch, the linear white/clear are where it is at. They are even nicer, in a sweet spot between old blacks and reds but super smooth.
Quickfire rapid with mx green switches. Stock caps just the board. Basically mint condition.
Is pricing a dead Dell AT101 (spilled soda on it) or it's keycaps at $10 good?
Possible at all that I could get more?
How much should I price the harvested working switches for (black alps, not sure if complicated or not)?
Is pricing a dead Dell AT101 (spilled soda on it) or it's keycaps at $10 good?
Possible at all that I could get more?
How much should I price the harvested working switches for (black alps, not sure if complicated or not)?
Anyone?
OK, what's this guy worth? A 122-key Model F XT. I know the layout looks AT, but the connector isn't and the seller says it needs good old Soarer to work.
I obviously don't believe it is worth the asking price of 170 nor do I have said 170, but if you guys could give an affordable realistic estimate, I might get lucky to the owner with an offer.
(SPeaking of which, when was the last time someone was selling a 122 key Model F? I'm really interested in getting my hands on these things... definitely not my hands under these things though, considering how much they weight!)
http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=181161161005&ssPageName=ADME:B:SS:SG:1123#ht_546wt_1030
Within 24 hours of me making this post, something that hadn't been sold for weeks suddenly sold at $170BIN!
We have a rich lurker in our midst.OK, what's this guy worth? A 122-key Model F XT. I know the layout looks AT, but the connector isn't and the seller says it needs good old Soarer to work.
I obviously don't believe it is worth the asking price of 170 nor do I have said 170, but if you guys could give an affordable realistic estimate, I might get lucky to the owner with an offer.
(SPeaking of which, when was the last time someone was selling a 122 key Model F? I'm really interested in getting my hands on these things... definitely not my hands under these things though, considering how much they weight!)
http://cgi.ebay.com.sg/ws/eBayISAPI.dll?ViewItem&item=181161161005&ssPageName=ADME:B:SS:SG:1123#ht_546wt_1030
Price check on the mintgum wasd mx ?
Thanks in advance
Price check on the mintgum wasd mx ?
Thanks in advance
$25
http://geekhack.org/index.php?topic=24467.0
Price check on the mintgum wasd mx ?
Thanks in advance
$25
http://geekhack.org/index.php?topic=24467.0
What's a fair price to charge for a 2 month old ducky shine 2 with clears?Something that I can afford. PM me and we'll talk.
Is pricing a dead Dell AT101 (spilled soda on it) or it's keycaps at $10 good?
Possible at all that I could get more?
How much should I price the harvested working switches for (black alps, not sure if complicated or not)?
Anyone?
If spilling soda on it killed it then how are the switches still good? Did you magically only spill on the controller or something?
How much can I ask for 90 plate mounted MX blacks? Used for about 8 months.
How much can I ask for 90 plate mounted MX blacks? Used for about 8 months.
I always say $0.50 per switch is a fair price for used switches.
HPE 104 - MX Brown. Retailed at $90.
No one seems to want to buy it from me, even for a hugely discounted price.
I'm thinking of selling my 6GV2 with MX Blacks for spares.If you're happy with the board and just want something with reds you could just swap the springs for some 62g springs from originativeco.com. These are very similar to springs from reds and would be practically exactly the same. The would involve desoldering and resoldering but would probably work out much, much cheaper than buying a new board.
Hopefully going to be upgrading it to something with Reds but i don't want this to go to waste.
Think it'd be better just to sell them as switches? If i learn how to desolder them etc.
HPE 104 - MX Brown. Retailed at $90.
No one seems to want to buy it from me, even for a hugely discounted price.
It's probably because of the full size :( You might find some buyers on other sites, where people are not as much in "the tinier the better" clubs :)
Oh just the display box, probably not a huge deal to most people, shouldn't effect the value really. So like I said before you should probably be able to break even on the Ducky 78 or pretty close to it since it was a limited edition.;)Thanks a lot
Hello,
I have a Filco Majestouch (the first version, not the second) with Brown Switches and the standard US-Layout. It has almost no signs of usage, but I don't have the original packaging anymore. What's it worth?
Thanks in advance for your help. :)
I've got a mint (unboxed) Microsoft Natural Keyboard Elite UK, I've seen it mentioned a few times on here, just wondering if these are worth anything?
I've got a used Razer Blackwidow (retail at $99), with a little bit of shine on the space bar, and the cabling, near the termination point at the keyboard end, came twisted from the factory. Unfortunately, I play in a recliner with keyboard in my lap, so after about 5 months lifting it to my lap and placing it back, the twist turned into a short. About once every two days, bending the cable the wrong end near the base, I get a BSOD.
Definitely a cable issue, and an absolutely great keyboard otherwise.
Price check?
I've definitely seen the light as far as Razer goes. I've moved on. Still looking for an alternative for the Razer Mamba however. This mouse has treated me well
Hi everyone - I've dug up an old IBM Model M "SSK" and will be selling it soon. It's used but in great condition and hasn't ever been disassembled.
What's it worth?
Specs:
Part No: 1391472
ID No: 2099875
Date: 02SEP87
Plt No: F2
Model: M
Manufacturer: (C) IBM Corp. 1984
Thanks in advance.
Hi everyone - I've dug up an old IBM Model M "SSK" and will be selling it soon. It's used but in great condition and hasn't ever been disassembled.
What's it worth?
Specs:
Part No: 1391472
ID No: 2099875
Date: 02SEP87
Plt No: F2
Model: M
Manufacturer: (C) IBM Corp. 1984
Thanks in advance.
ssk one piece keys
Is the front edge of the board warped or is it the flash? Can you take a better pic of the front edge (below the spacebar?)
What's a good price for a Dell AT101W? I have a line on one in what looks to be pretty good condition and want to make sure I'm not overpaying.
Filco yellow edition w/ browns? I just never use it anymore, but man, I would be reluctant only because of the caps which I do use.
Red/black litster case?
What's a good price for a Dell AT101W? I have a line on one in what looks to be pretty good condition and want to make sure I'm not overpaying.
I have a Ducky Zero DK2108 w/ MX Browns in perfect condition that I'm looking to sell. I only purchased it 3 weeks ago, barely used it, and I've been keeping the plastic dust cover on it when not in use. I still have the box in great condition and everything it comes with.
Purchased for $95 three weeks ago, what would be an appropriate asking price?
I have a Ducky Zero DK2108 w/ MX Browns in perfect condition that I'm looking to sell. I only purchased it 3 weeks ago, barely used it, and I've been keeping the plastic dust cover on it when not in use. I still have the box in great condition and everything it comes with.
Purchased for $95 three weeks ago, what would be an appropriate asking price?
$85?
Price check on a full WYSE set with 1.25 and 1.50 moogle kits?
I have a Googol Board EZ, large-print ALPS keyboard. Tactile, non-clicky keys. Pics attached. Price? Also, how much if it was sold for the keyswitches?Show Image(http://i.imgur.com/o1yvyt6.jpg)Show Image(http://i.imgur.com/m0xttaK.jpg)Show Image(http://i.imgur.com/OnzcJE7.jpg)
I was wondering how much I should expect paying for a MX Super Black. Have never seen one for sale here.
I have a Googol Board EZ, large-print ALPS keyboard. Tactile, non-clicky keys. Pics attached. Price? Also, how much if it was sold for the keyswitches?Show Image(http://i.imgur.com/o1yvyt6.jpg)Show Image(http://i.imgur.com/m0xttaK.jpg)Show Image(http://i.imgur.com/OnzcJE7.jpg)
I think new these were fairly cheap, like $10-$20, on eBay they go anywhere from $30-$60.
I'm not sure if anyone would want the switches or not.
I was wondering how much I should expect paying for a MX Super Black. Have never seen one for sale here.
Per switch price?
I don't mean this to come off as insulting as I'm sure some people hold their CC in high regard if it's a color they really lusted for. But what are some of the less expensive second hand CCs for MX I should watch out for? It seems so subjective seeing as some people value one more then others but I dont have $100+ to spend on keycaps (my girlfriend would not be okay with that lol) I just tried at my first 4 grabsfor the RWB sale, unfortunately didn't get a e-mail. I must've sent it a second to late at the most. Which is just amazing to me. It just adds to the allure.
my switch?
nobody in Germany wants this switch ..
I have another 2 or 3 other G81 .. but nobody wants it .. scrap
clear switches?
correct me if im wrong but is clear the heavier version of brown like how green is a heavier version of blue?
I don't mean this to come off as insulting as I'm sure some people hold their CC in high regard if it's a color they really lusted for. But what are some of the less expensive second hand CCs for MX I should watch out for? It seems so subjective seeing as some people value one more then others but I dont have $100+ to spend on keycaps (my girlfriend would not be okay with that lol) I just tried at my first 4 grabsfor the RWB sale, unfortunately didn't get a e-mail. I must've sent it a second to late at the most. Which is just amazing to me. It just adds to the allure.
Hack Orange or possibly some F2s (red, blue, yellow). MAYBE a Mint Gum Green, but most likely not. If you're enticed by any one, just get 60 posts under your belt, and start a WTB thread, asking for any CC at retail value.
Price check on blank candycorn mx? Thanks.
price of Clack Factory 420 Sticky icky icky topre?
guess I wasn't being very clear, but can I please also get a PC on individual clear switches?
thx ;D
guess I wasn't being very clear, but can I please also get a PC on individual clear switches?
thx ;D
I've paid mostly somewhere around $0.75-0.80/switch
These were new plate mount.
How many do you need? Or perhaps you are selling?
I've got a few used clears that would go much cheaper than the above price.
guess I wasn't being very clear, but can I please also get a PC on individual clear switches?
thx ;D
I've paid mostly somewhere around $0.75-0.80/switch
These were new plate mount.
How many do you need? Or perhaps you are selling?
I've got a few used clears that would go much cheaper than the above price.
thinking about modding my QFR into clears some time in the future once I'm not lazy and feel confident about my soldering skills
I was wondering how much I should expect paying for a MX Super Black. Have never seen one for sale here.
What's a Hapster worth?
What's a Hapster worth?
What's a Hapster worth?
Priceless
What's a Hapster worth?
Priceless
Haha. No idea why you'd think that, boilermaker. :cool:
What's a Hapster worth?
The real question is how much is this worth...I give you the OG ALPS 'bunsir'
(Attachment Link)
The real question is how much is this worth...I give you the OG ALPS 'bunsir'
(Attachment Link)
The real question is how much is this worth...I give you the OG ALPS 'bunsir'
(Attachment Link)
ill give you a dollar
How much do you guys think the blue blank thick PBT key caps are worth for the set? They are from IMSTO.
(http://imgur.com/a/kn6mM)
What's a Hapster worth?
Not sure if trolling or just a derpy bastard.What's a Hapster worth?
Looking back through the classifieds most were auctioned and went anywhere from $15-$40 with a few at $25. (Some had other keys included also)
I'm not sure if they've ever been 'for sale' anywhere. Probably before my time.
Not sure if trolling or just a derpy bastard.What's a Hapster worth?
Looking back through the classifieds most were auctioned and went anywhere from $15-$40 with a few at $25. (Some had other keys included also)
I'm not sure if they've ever been 'for sale' anywhere. Probably before my time.
$60 or so for that blue thick PBT set sounds reasonable.
I'm no expert, but I might pay $40-50 if I was looking for that color. They seem to be in good condition. I think they sell for about $70 NIB.
Please enlighten me. I have wanted a hapster for a while now and have not ever saw a place I could just go buy one.
I really did search the classifieds.
Please enlighten me. I have wanted a hapster for a while now and have not ever saw a place I could just go buy one.
I really did search the classifieds.
Maybe I'm making a mistake here but they were only recently given away by i3oiler when people ordered stuff.
they have been used to entice people to buy stuff recently, but that wasnt the point behind them, there is an entire thread about it if people care to search, i now have 2 hapsters, and they make me very happy, and the miami hapsters are coming soon
i hope that hapsters in general never come up for general sale
Hapsters are the new clacks. Confirmed. Looks like i'm going to have to sell this thing for $5000. As much as it pains me...
Here's the pic. Haven't even taken it out of the bag.Show Image(https://dl.dropboxusercontent.com/u/8355692/keyboard/IMG_5759.JPG)
(Attachment Link)
Das with browns, non media key version
Filco with 62g Ergo-Clears, a phantom-style (solderless switch swapping) plate, a ATmega32u4 controller, plate mount Cherry stabs, and yellow LEDs. Includes extra Cherry stabs and a full Costar set.
I set a price at $210, but obviously that's high.
Filco with 62g Ergo-Clears, a phantom-style (solderless switch swapping) plate, a ATmega32u4 controller, plate mount Cherry stabs, and yellow LEDs. Includes extra Cherry stabs and a full Costar set.
I set a price at $210, but obviously that's high.
I would say $180 is the least amount I would sell it for, but seeing as how much work you've put into it $210 sounds like a good price to me. That would of course depend on how used it is and if it comes with caps or not?
How much is an Oktoberfest CC worth?
How much is an Oktoberfest CC worth?
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everydayMy 3 BS clacks? :))
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
Tsangan, I think you'd have better luck selling the caps, CC, and board separately.If you say so!
Tsangan, I think you'd have better luck selling the caps, CC, and board separately.If you say so!
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everyday
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everyday
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
What is a KMAC 2 with an acrylic case worth? Was this even made or did someone get a plate and a PCB and make it and source out an acrylic case?
Need a price for a Kmac Mini (reannodized to blue grey)...vintage mx blacks, lubed, stickered, 62g springs. Would also like a price for the Kmini that includes an original dolch keycap set in mint condition.
Julysicle CC?
can i trade that for the Mona Lisa?Julysicle CC?
priceless
can i trade that for the Mona Lisa?Julysicle CC?
priceless
DDDDDDDDD:can i trade that for the Mona Lisa?Julysicle CC?
priceless
no
Julysicle CC?
My painted QFR with blue switches...sanded with consecutive grit paper, then krylon fusion...looks amazing...but whats it worth??Show Image(http://i.imgur.com/sGP2X2k.jpg)
Price check on Red 356mini(real one not the acrylic case knock off). MX blues,Just gift it to your friend Mike
Datamini looks like same thing as Chicony 51X1 MX version. Those usually go for around $30-45, but really you could probably get more out of the switches alone removed cleanly from the keyboard.
Any word on the 1st generation Poker with red switches? I have the original ABS keys laying around as well.
PC on a brand new White Leopold FC700R MX Browns?
How much would a filco ninja2 TKL be?
used for a month, very good condition. With the stock side printed keycap
How much would a filco ninja2 TKL be?
used for a month, very good condition. With the stock side printed keycap
It would also depend on the switches. But, it would still be in the $125-$140 price range. Photoelectric is trying to sell a brown for $125 right now but the case is painted (very well I might add). So for a quick sale you might be looking at $110.
The market is a little down right now....I think to many people are waiting for the GH60 project to be complete.
How much would a filco ninja2 TKL be?
used for a month, very good condition. With the stock side printed keycap
It would also depend on the switches. But, it would still be in the $125-$140 price range. Photoelectric is trying to sell a brown for $125 right now but the case is painted (very well I might add). So for a quick sale you might be looking at $110.
The market is a little down right now....I think to many people are waiting for the GH60 project to be complete.
oops, forget the said, it is red
how about if it doesn't have the original keycaps?
What's a fair price to ask for one of my 60% wrist wrests should I decide to sell it?
What's a fair price to ask for one of my 60% wrist wrests should I decide to sell it?Show Image(http://i.imgur.com/IR0KLkz.jpg[.img]
[img]http://i.imgur.com/QGLVBYI.jpg)
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
You alright jwaz? You seem quite... Schizophrenic today.
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
Seems hard to find a good price on a dolch keyboard anymore.
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
Seems hard to find a good price on a dolch keyboard anymore.
http://www.ebay.com/itm/Dolch-PAC64-Mobile-Sniffer-Network-Analyzer-Tester-Computer-200MHz-Portable-/310715940260?pt=LH_DefaultDomain_0&hash=item48581cfda4 (http://www.ebay.com/itm/Dolch-PAC64-Mobile-Sniffer-Network-Analyzer-Tester-Computer-200MHz-Portable-/310715940260?pt=LH_DefaultDomain_0&hash=item48581cfda4)
Dolch Keyboard?
No need to answer, that's a rhetorical question.
Around $80
And don't give me that "it's in good condition" BS. The damn thing folds up!
Seems hard to find a good price on a dolch keyboard anymore.
http://www.ebay.com/itm/Dolch-PAC64-Mobile-Sniffer-Network-Analyzer-Tester-Computer-200MHz-Portable-/310715940260?pt=LH_DefaultDomain_0&hash=item48581cfda4 (http://www.ebay.com/itm/Dolch-PAC64-Mobile-Sniffer-Network-Analyzer-Tester-Computer-200MHz-Portable-/310715940260?pt=LH_DefaultDomain_0&hash=item48581cfda4)
wow
wowbig text
wowbig text
#keephypealive #rare #ABSgetsshiny
wow
big text
#keephypealive #rare #ABSgetsshiny
#shinyABSisthebest #thebest #thebest
wow
big text
#keephypealive #rare #ABSgetsshiny
I CAN TYPE BIGGER THAN YOU!
Just kidding.
I'm about to sell a bunch of keyboards and stuff, and I'd just like to make sure that these prices are fair;I dont know those ibm things but those prices are way too high on at least the black widow and 6gv2.
Razer Blackwidow BF3 Edition - $85 (mint condition)
SteelSeries 6Gv2 - $70 (shiny tops on some keycaps)
IBM Model F XT - $65 (Untested, but clean keycaps)
IBM Personal WheelWriter 2 - $100 (Untested, slightly dirty caps)
And of course, some extra keycaps;
Rosewill OEM ABS Keycaps - $20 (Mint)
Filco Ninja ABS Keycaps - $30 (Used, but no shine)
And some mice while I'm at it;
Razer Deathadder Pre-2013 (Blue) - $35 (Frayed cable but works perfectly, some makeup left over from girlfriend borrowing it)
Logitech G9x - $40 (Frayed cable but works perfectly)
Here's a picture; http://i.imgur.com/KI1bvKk.jpg
The cheapest one, including shipping is at least $110, which surprised me.
what do you guys think a 87 clear switches board worth?
what do you guys think a 87 clear switches board worth?
How much is a white alps Siig Minitouch worth?
How much is a white alps Siig Minitouch worth?
~$50 I think from what I've seen in previous sales.
What about the GH SiiG?
How much is a white alps Siig Minitouch worth?
Keycool limited edition 87 clears Almost brand new barely used only tried how the switches feels on the arrow keyswhat do you guys think a 87 clear switches board worth?
It depends on which board it is, how used it is and if your selling just the switches or everything.
How much would a Moosesicle cost? Not that it is for sale. Just curious...
D,: what are you saying, CDT?
Alps? ALPS!? Do I LOOK like some sort of hipster to you?
Basically new condition CM QFR with MX reds with original unused keycaps. Can't decide whether to mod this one or buy a new one to mod.
how much is a blue imsto thick pbt dyesub set? Black on blue
I thought it was pretty obvious? I paid $50 for my tkl set used. I think new full sets are around $90 on ebay.how much is a blue imsto thick pbt dyesub set? Black on blue
That depends on which kind....pictures would help.
How much for a non labeled qfr w/blues. With imsto thick pbt with cherry font. Its the two tone set with blue legends. Same board as my avatar if you can see it but no branding.
Also price on them seperate please, both are like new.
Thanks Bro. Where you at in OC?
HB Baby!!!
Anyone have any idea what an Optimus Maximus would be worth?
I have one sitting in my closet with the original box and all of its accessories. Used it maybe twice.
Thanks!
Anyone have any idea what an Optimus Maximus would be worth?
I have one sitting in my closet with the original box and all of its accessories. Used it maybe twice.
Thanks!
Anyone? :rolleyes:
Anyone have any idea what an Optimus Maximus would be worth?
I have one sitting in my closet with the original box and all of its accessories. Used it maybe twice.
Thanks!
Anyone? :rolleyes:
You would have better luck on Ebay. Even though the idea is cool the fact that it is rubber dome will deter most people here.
What's a good price on a Dolch Pac, keyboard only?
What's a fair selling price for a thick Wyse set with moogle. It has everything but the stock Wyse spacebar which arrived broken. The caps have no shine and, aside from some of the numpad caps, look almost brand new aside from some small shifts in color due to age. I did retrobright them, so they're pretty close to being all the same color.
Since it's a thick Wyse set, I was thinking $60-70 would be fair or a trade for a beige and cream Cherry doubleshot set. Is that about right?
you'd need a moogle to really make it work on anything else. That's just me though.
[TW]
cream on gray/dark grey
any idea what this set would be worth?
it has metal insert stabilizers on the space bar and a crazy double cross stem on the return!
Are you sure that's MX compatible?
i think that is a little bit too large for a mx
Are you sure that's MX compatible?
I never said it was... :))i think that is a little bit too large for a mx
Good eye sir, just got a chance to check it against my switches, and it fits my M7 switch
Too big for the lil ol MX stems :eek:
Are you sure that's MX compatible?
I never said it was... :))i think that is a little bit too large for a mx
Good eye sir, just got a chance to check it against my switches, and it fits my M7 switch
Too big for the lil ol MX stems :eek:
Bummer. Might be a tough sell.
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everyday
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everyday
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
OMG, this is the best looking keyboard, hands down. Please put a price tag on it so that I can buy it. ;)
Alright this is a hard one, I can't really think of what the price to put on this. It's not a board you see everyday
LZSE with OTD red alert + QWER Keys B series Number + Function row + 3D CCShow Image(http://i.imgur.com/MGUCH.jpg)
OMG, this is the best looking keyboard, hands down. Please put a price tag on it so that I can buy it. ;)
700
How much for a Poker X stock plastic case?
How much for a Poker X stock plastic case?
$20-$30 shipped imo, though I'd sell for $20 if I had an extra to sell.
How much for a Poker X stock plastic case?
$20-$30 shipped imo, though I'd sell for $20 if I had an extra to sell.
And there are dozens of people who would buy it!!! ;)
Yay jocelyn is back!
How much for a Poker X stock plastic case?
$20-$30 shipped imo, though I'd sell for $20 if I had an extra to sell.
And there are dozens of people who would buy it!!! ;)
Yay jocelyn is back!
Chicony E8H5IKKB-5161A Yellow Alps
Excellent condition but I can't test if it's working because I don't have an AT adapter.
Can't find anything about this specific model (5161A)
One person has a 5181 on eBay for $125
There is a G80-3000 on keyboardco's site for around $120, I believe. Has MX Reds.I've seen that, they offer it in most stem types and it costs Ł60.. This is for a friend who has very little cash to spend on a mech and I was wondering if he might be able to get an old G80 for even less.
LF price on this PBT cherry spacebar, taken off of a cherry MY board from the MN meetup. Any ideas?Show Image(http://i.imgur.com/TBE2uix.jpg)
LF price on this PBT cherry spacebar, taken off of a cherry MY board from the MN meetup. Any ideas?Show Image(http://i.imgur.com/TBE2uix.jpg)
not sure about size, but same size as the one on my leopold.LF price on this PBT cherry spacebar, taken off of a cherry MY board from the MN meetup. Any ideas?Show Image(http://i.imgur.com/TBE2uix.jpg)
what size is it?
im just wondering on price cuz I asked kawa about it at the meetup and he said he's never seen anything like it, then he asked someone who would know and they didnt even know cherry had any PBT tooling, so I was just curiousLF price on this PBT cherry spacebar, taken off of a cherry MY board from the MN meetup. Any ideas?Show Image(http://i.imgur.com/TBE2uix.jpg)
25 cents
allt he 6x cherry spacebars are pbt?
Are those black Cherry keycaps really PBT? I thought they were POM.
How much goes a 2nd hand kbt pure pro and/or kbc poker 2?
Thanks!! ;D
How much goes a 2nd hand kbt pure pro and/or kbc poker 2?
Thanks!! ;D
LEDs or no LEDs? PBT or ABS caps? All accessories, or some missing? And what's the condition?
How much does everything in boost's thread cost?
How much goes a 2nd hand kbt pure pro and/or kbc poker 2?
Thanks!! ;D
LEDs or no LEDs? PBT or ABS caps? All accessories, or some missing? And what's the condition?
No leds, all accessories and in fine condition. About the caps, i might be interested in both prices :p
I would like to know if it's worth something, a WYSE original keyset, with some ... specifities such as 8x spacebar, and 2.5x ctrl etc.around $40? Someone correct me if I'm wrong, I saw one going for that much at keycon I think. For it to fit on a normal keyboard you would need a moogle set.
Switches are RRE Black, same as MX-Black but don't know if it's 60g or not. Have to try Imgur pic (http://i.imgur.com/vgaKaxr.jpg)
I have a green topre keychain. Just interested in knowing what it's worth. Thanks!
Idk, feng has some up on his ebay store and some sold for really high prices. http://www.ebay.com/itm/Realforce-Keycain-w-Blue-PBT-Dyesub-Keycap-/330896362942?pt=PCA_Mice_Trackballs&hash=item4d0af5cdbeI have a green topre keychain. Just interested in knowing what it's worth. Thanks!
Couple of dollars? Say $4-6?
I got a Mint Green WASD set for $75.
How much is a Mint Green MX Clack arrow set worth?
I am going to make a trade but I have no real idea of the value.
Idk, feng has some up on his ebay store and some sold for really high prices. http://www.ebay.com/itm/Realforce-Keycain-w-Blue-PBT-Dyesub-Keycap-/330896362942?pt=PCA_Mice_Trackballs&hash=item4d0af5cdbeI have a green topre keychain. Just interested in knowing what it's worth. Thanks!
Couple of dollars? Say $4-6?
http://www.ebay.com/itm/Realforce-Keycain-w-Red-PBT-Dyesub-Keycap-/230996149797?pt=PCA_Mice_Trackballs&hash=item35c8718625
I don't remember why they're so special. I want to say I remember reading they were limited edition given out at an event, but don't quote me on that.
How much is a lightly used CoolerMaster QFR with Red switches worth?
How much is a lightly used CoolerMaster QFR with Red switches worth?
No more than $60 shipped.
trade value and sale value of a vader CC ?
trade value and sale value of a vader CC ?
Somewhere in the range of $150
trade value and sale value of a vader CC ?
Somewhere in the range of $150
thanks. i think i'll end up selling or trading if i dont like it.
trade value and sale value of a vader CC ?
Somewhere in the range of $150
thanks. i think i'll end up selling or trading if i dont like it.
dibs hehe
Also, I'm new to GH. I can't seem to post in the classifieds. Can anyone help?
Also, I'm new to GH. I can't seem to post in the classifieds. Can anyone help?
You need to get 60 posts first.
What's a Pure with LEDS go for these days? I really want one all of a sudden.
Any chance on them restocking?
Any chance on them restocking?
Hey, The_Ed, I've seen ya frequent this thread often, how much do you think one of those cherry DS sets from the MN meet we had are worth? I did get one of the nicer sets without as much shine on them
flynn was sellin them for $10 I believeHey, The_Ed, I've seen ya frequent this thread often, how much do you think one of those cherry DS sets from the MN meet we had are worth? I did get one of the nicer sets without as much shine on them
That's your free set from the meetup right? (I didn't take one because I had no need for it) If so then the same price inlikeflynn was selling them for, or free in a giveaway. You shouldn't get any profit from a free set.
flynn was sellin them for $10 I believeHey, The_Ed, I've seen ya frequent this thread often, how much do you think one of those cherry DS sets from the MN meet we had are worth? I did get one of the nicer sets without as much shine on them
That's your free set from the meetup right? (I didn't take one because I had no need for it) If so then the same price inlikeflynn was selling them for, or free in a giveaway. You shouldn't get any profit from a free set.
flynn was sellin them for $10 I believeHey, The_Ed, I've seen ya frequent this thread often, how much do you think one of those cherry DS sets from the MN meet we had are worth? I did get one of the nicer sets without as much shine on them
That's your free set from the meetup right? (I didn't take one because I had no need for it) If so then the same price inlikeflynn was selling them for, or free in a giveaway. You shouldn't get any profit from a free set.
I think that price is a little low, of course this is just me speculating. Will those sets get made by BSP and will they be identical is still yet to be known.you can still get 300+ usd for a ESA-3000 HASR0 if you find a right person.
The replicas are nice but just like all replicas the original is always better I think.
I guess I might just shove it on eBay to see what it can fetch, but I mean if I saw a BIN for a HASRO set on eBay for $180 a lot of people would snatch it up instantly at least that's what I think.
I definitely appreciate your input though!
I got some QuakeCon exclusive nVidia keycaps [at Quakecon]. How much would you pay for these [each]?
Show Image(https://pbs.twimg.com/media/BQmI9npCIAARNnE.jpg)
nVidia key would be cool, but not if it's OEM profile which I can't really tell from the photo angle. OEM profile, I would pay zero. Cherry profile, maybe $4.
Poker X lubed/stickered vintage blacks in one of Ali's acrylic cases? :rolleyes:MoreShow Image(http://i.imgur.com/wufjV8L.jpg)
I posted before but no one replied. Price check on Filco MJ2 TKL with mx blues! :D
I posted before but no one replied. Price check on Filco MJ2 TKL with mx blues! :D
What you've got it listed for right now is fair IMO.
How much can I get for a set like this? There's no tenkeypad or arrow keys. Fits on MX, material looks like thick ABS doubleshot.
Rosewill 104 key board w/MX Blues (never used, decided I much preferred Reds and missed NewEgg RMA window)
ErgoDox w/Ergo Clears (55g Korean springs, will include original springs), assembled personally with professional solder joints, SMD diodes, tested, very clean build. The problem is, I just need Reds. So I'd either like to sell the assembled kit and start over, or I'm going to have to de-solder every last switch and swap them out for Reds.
How much is worth for
1. DAS Retro set
2. tanslucent green brobot
3. black CC
4. Olivetti set
Thanks
Rosewill 104 key board w/MX Blues (never used, decided I much preferred Reds and missed NewEgg RMA window)
ErgoDox w/Ergo Clears (55g Korean springs, will include original springs), assembled personally with professional solder joints, SMD diodes, tested, very clean build. The problem is, I just need Reds. So I'd either like to sell the assembled kit and start over, or I'm going to have to de-solder every last switch and swap them out for Reds.
Rosewill 104 key board w/MX Blues (never used, decided I much preferred Reds and missed NewEgg RMA window)
ErgoDox w/Ergo Clears (55g Korean springs, will include original springs), assembled personally with professional solder joints, SMD diodes, tested, very clean build. The problem is, I just need Reds. So I'd either like to sell the assembled kit and start over, or I'm going to have to de-solder every last switch and swap them out for Reds.
I thought the ergodox had removable switch tops?
Rosewill 104 key board w/MX Blues (never used, decided I much preferred Reds and missed NewEgg RMA window)
ErgoDox w/Ergo Clears (55g Korean springs, will include original springs), assembled personally with professional solder joints, SMD diodes, tested, very clean build. The problem is, I just need Reds. So I'd either like to sell the assembled kit and start over, or I'm going to have to de-solder every last switch and swap them out for Reds.
I thought the ergodox had removable switch tops?
I does, but that's tedious and it's easy to break a switch.
How much is worth for
1. DAS Retro set
2. tanslucent green brobot
3. black CC
4. Olivetti set
Thanks
Any idea?
How much is worth for
1. DAS Retro set
2. tanslucent green brobot
3. black CC
4. Olivetti set
Thanks
Any idea?
1. a set recently sold for $110 by mistakemistake
2. around $80 would be fair... maybe a bit more because it is translucent and a desirable color
3. couldn't tell you because I want to buy it if you are selling
4. a set recently sold for $80 + shipping by Hyde
http://item.ultimatelist.com/for-sale/consumer-computer/UL15241.htm
I don't own it, but what is a decent price for this keyboard?
Rosewill 104 key board w/MX Blues (never used, decided I much preferred Reds and missed NewEgg RMA window)
ErgoDox w/Ergo Clears (55g Korean springs, will include original springs), assembled personally with professional solder joints, SMD diodes, tested, very clean build. The problem is, I just need Reds. So I'd either like to sell the assembled kit and start over, or I'm going to have to de-solder every last switch and swap them out for Reds.
I thought the ergodox had removable switch tops?
I does, but that's tedious and it's easy to break a switch.
Tedious maybe but I've never heard anything about breaking switches.
What is the cheapest i can get an ergodox without switches (PCB+plate+case). Thanks in advance!
Like new G84-4100? (used less than 2 hours)
I see them selling for ~$45 on ebay, and $75 on mk.com. Just wanted to double check here.
Also, black alps switches? 104 of them to be exact.
How much can I get for a set like this? There's no tenkeypad or arrow keys. Fits on MX, material looks like thick ABS doubleshot.are you positive it 'fits' on cherry mx and isn't just a tiny bit too big and loose (insert ex gf joke BAM!)
How much is a Leopold with MX Blacks worth? TIA.
What is the cheapest i can get an ergodox without switches (PCB+plate+case). Thanks in advance!
If I could get a full e-dox kit w/o switches for ~$150 I believe my wallet would be hacked for $150-$450 pretty quick afterWhat is the cheapest i can get an ergodox without switches (PCB+plate+case). Thanks in advance!
I've seen full E-Dox kits w/o switches sell for about $150, which included, Case, PCB's, Teensy, Cables, Connectors, Diodes, etc.
What's a fair price for an IBM Model F AT (5170)? I haven't tested it yet since I'm waiting on an AT to PS/2 Adapter, but what would be a fair price for it once I confirm it's working? Overall, it's in good shape. Not perfect shape, but definitely good shape.
What's a fair price for an IBM Model F AT (5170)? I haven't tested it yet since I'm waiting on an AT to PS/2 Adapter, but what would be a fair price for it once I confirm it's working? Overall, it's in good shape. Not perfect shape, but definitely good shape.
$120-150 would not be at all out of line. You are right, they sell at random prices.
If it were mine, everything tested A-OK, and I had cleaned it up nicely, I would start at about $180 and drop the price about $20 about every 3 days until it sold.
I have someone offering me a white HHKB as shown here: http://i.imgur.com/jpSDt8p.jpg for $240. Is this a good deal?
I have someone offering me a white HHKB as shown here: http://i.imgur.com/jpSDt8p.jpg for $240. Is this a good deal?
You can buy a new one for $260 on EK if you can wait.
That's a buckling spring Hack Orange.
That's a buckling spring Hack Orange.I believe you're correct
What would a brand new Ducky 9008G2 Pro Dyesub PBT be worth with only the numpad keys?
What would a brand new Ducky 9008G2 Pro Dyesub PBT be worth with only the numpad keys?
What would a brand new Ducky 9008G2 Pro Dyesub PBT be worth with only the numpad keys?
What switch type?
What would a brand new Ducky 9008G2 Pro Dyesub PBT be worth with only the numpad keys?
What switch type?
well since I'm going after the blue/gray pbt models - brown is out of it. Only Blue/Black/Red are in stock.
So let's say red or blue since they are probably worth more by $5 or whatever.
A brand new QFR (red/black/brown/blue) without the case?
Or more specifically SGK-4000-GKCC1-US model (blacks) with no case.
A brand new QFR (red/black/brown/blue) without the case?
Or more specifically SGK-4000-GKCC1-US model (blacks) with no case.
QFR's can be had at any given time for about $55 shipped from newegg/amazon/etc. I'd say $40 shipped for one with no case.
A brand new QFR (red/black/brown/blue) without the case?
Or more specifically SGK-4000-GKCC1-US model (blacks) with no case.
QFR's can be had at any given time for about $55 shipped from newegg/amazon/etc. I'd say $40 shipped for one with no case.
Hmm I don't know about any given time maybe one a month for a few days and usually only blues after rebates. ::)
But I'd probably take $40 for it shipped without the case :thumb:
Although maybe it would be more fun to desolder it. :o
A brand new QFR (red/black/brown/blue) without the case?
Or more specifically SGK-4000-GKCC1-US model (blacks) with no case.
QFR's can be had at any given time for about $55 shipped from newegg/amazon/etc. I'd say $40 shipped for one with no case.
Hmm I don't know about any given time maybe one a month for a few days and usually only blues after rebates. ::)
But I'd probably take $40 for it shipped without the case :thumb:
Although maybe it would be more fun to desolder it. :o
Browns and Reds:
http://www.newegg.com/Product/Product.aspx?Item=N82E16823129005
http://www.newegg.com/Product/Product.aspx?Item=N82E16823129006
90 clears?
90 clears?
used or new?
plate or pcb mount?
Brand new Cherry Blues ~1700 (Plate Mounted)
Thoughts on:
90pc Set - $50 Shipped Conus
110pc Set- $60 Shipped Conus
Reasonable?
Brand new Cherry Blues ~1700 (Plate Mounted)
Thoughts on:
90pc Set - $50 Shipped Conus
110pc Set- $60 Shipped Conus
Reasonable?
90 clears?
used or new?
plate or pcb mount?
New and plate mounted
What would it likely cost to buy a stock case for a Filco MJ2 Ninja from someone? I know this is a reverse price check but this seemed like a smart place to ask. :)
What would it likely cost to buy a stock case for a Filco MJ2 Ninja from someone? I know this is a reverse price check but this seemed like a smart place to ask. :)
I have a black TKL one if you're interested. PM me
One year old TKL filco majestouch with browns. Basically new, I cleaned it every fortnight. It's been sitting in the box for a couple of months now.
One year old TKL filco majestouch with browns. Basically new, I cleaned it every fortnight. It's been sitting in the box for a couple of months now.
Probably could do $120 shipped or so.
g80 3700 numpad. esc key needs to be resoldered and it's modded to blues where i didnt have to desolder a stupid LED.
g80 3700 numpad. esc key needs to be resoldered and it's modded to blues where i didnt have to desolder a stupid LED.
What would it likely cost to buy a stock case for a Filco MJ2 Ninja from someone? I know this is a reverse price check but this seemed like a smart place to ask. :)
Edit: A full tenkey case to be clear. :)
What would it likely cost to buy a stock case for a Filco MJ2 Ninja from someone? I know this is a reverse price check but this seemed like a smart place to ask. :)
Edit: A full tenkey case to be clear. :)
This is a question I would like answered. Just where to cop a full sized replacement external casing in general is what I need.
What would it likely cost to buy a stock case for a Filco MJ2 Ninja from someone? I know this is a reverse price check but this seemed like a smart place to ask. :)
Edit: A full tenkey case to be clear. :)
This is a question I would like answered. Just where to cop a full sized replacement external casing in general is what I need.
There's this one in the classifieds
http://geekhack.org/index.php?topic=47738.0
Stock Dolch keyboard, modded with custom PS2 cable? I'm planning on swapping it back to the RJ9 cable connector, and the Dolch PAC unit is functional as well.
Stock Dolch keyboard, modded with custom PS2 cable? I'm planning on swapping it back to the RJ9 cable connector, and the Dolch PAC unit is functional as well.
Dude!! You need to pm me if you want to sell it haha.
g80 3700 numpad. esc key needs to be resoldered and it's modded to blues where i didnt have to desolder a stupid LED.
depending on the condition, $40-80
mode 1? mode 4? windowed num lock?
mode 1 is top 4 keys programmable right? if so, that one. dont have stock keys anymore. but it'll come with cherry doubleshots.
Green & Cream Cheese TKL set, used for 6 months
A stock poker case?
Is this only for KB related stuff? If not, then PC on a NM Dark Confidant from MM. If so, then completely disregard this.
Is this only for KB related stuff? If not, then PC on a NM Dark Confidant from MM. If so, then completely disregard this.
Best bet would be just to check eBay. I actually have a foil one of those for sale right now.
Is this only for KB related stuff? If not, then PC on a NM Dark Confidant from MM. If so, then completely disregard this.
Best bet would be just to check eBay. I actually have a foil one of those for sale right now.
Someone I know got a foil tarmagoyf...
Looking for a very rough price on gold springs. I'm looking for about 110 in 55g.
Mine! I need them for err.. swag related reasons :))Looking for a very rough price on gold springs. I'm looking for about 110 in 55g.
It shall be mine! :p :p
Mine! I need them for err.. swag related reasons :))Looking for a very rough price on gold springs. I'm looking for about 110 in 55g.
It shall be mine! :p :p
un-assembled ergo dox? kinda wanna assemble one for fun.
I guess I could join the next massdrop gb, if that's any time soon.
un-assembled ergo dox? kinda wanna assemble one for fun.
I guess I could join the next massdrop gb, if that's any time soon.
This thread is for people who have something to sell and aren't sure what it is worth. If you're looking for an ergo dox, post a WTB classifieds thread.
Stock Dolch keyboard, modded with custom PS2 cable? I'm planning on swapping it back to the RJ9 cable connector, and the Dolch PAC unit is functional as well.
I think fair market value for an 1813HFX is still in the $80-120 range dependent on condition. No clue what the rest of the PAC is worth... if it was me I would probably just give it as an option with the condition they have to pay the additional shipping that would be needed.
Dolch style keyset with tenkey caps as well.Show Image(http://i2.photobucket.com/albums/y42/kikim85/dc851690.jpg)
I believe this is the phantom or rag keyset. GB from a few years ago. Only pic I have is this sorry. It's basically red and black.Show Image(http://i2.photobucket.com/albums/y42/kikim85/e209ac72-2c5d-454d-9172-2d322b6b9c95.jpg?t=1379546504)
Also, how much does the MX CC candy corn go for?
Looking for a very rough price on gold springs. I'm looking for about 110 in 55g.Anyone?
Looking for a very rough price on gold springs. I'm looking for about 110 in 55g.Anyone?
Batman Arkham Origins code I received from my recent Geforce GTX purchase.
Batman Arkham Origins code I received from my recent Geforce GTX purchase.
Batman Arkham Origins code I received from my recent Geforce GTX purchase.
free?
I've seen the light and want to get a 60% board. How much would a GH60 (pure layout) PCB + plate be worth? Going to put a WTB thread up soon but I want to know how much I'm in for first.
I've seen the light and want to get a 60% board. How much would a GH60 (pure layout) PCB + plate be worth? Going to put a WTB thread up soon but I want to know how much I'm in for first.
The original prices were 28 (smd presoldered) and 16 for the pcb and the plate.
An assembled 456GT with BSP dyesubs sold for $705 recently in an auction.omg :eek: how can i miss this
Depends on if it wears off quickly or if the paint is resilient.
How much are 107 used mx brown stems worth?
How much are 107 used mx brown stems worth?
How much are 107 used mx brown stems worth?
107 x $0.50-0.60, I'd say.
Sweet, thanks. When I read "$0.50-0.60", I was like :eek: that can't be right.How much are 107 used mx brown stems worth?
107 x $0.50-0.60, I'd say.
Stems, not switches. That's an incredibly high price for stems alone.
What's a hardcore white MX skull go for? I've been wanting one.
What's a hardcore white MX skull go for? I've been wanting one.
No because he wants to know what he should offer for one as a fair price.What's a hardcore white MX skull go for? I've been wanting one.
shouldn't that be a WTB thread?
What's a hardcore white MX skull go for? I've been wanting one.
What's a hardcore white MX skull go for? I've been wanting one.
I'm thinking 50-$70
How much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
What's a hardcore white MX skull go for? I've been wanting one.
I'm thinking 50-$70
That's lower than a HO which have been going for $70-100 recently (at least I seem to remember one going for around $100 recently). I've been wanting an HCW for a while now too, and it seems like they go for at least $70 and generally closer to $90-100, even with the latest batch released. Is that a fair price? Not to me, that's people profiteering off of them, but it's a realistic price.
A good price for Julysicle & Oktoberfest ?
I believe I sold my Oktoberfest for $65 shipped. I believe I could of gotten around $100 but oh wellA good price for Julysicle & Oktoberfest ?
^ Anyone ? :-X :'(
I believe I sold my Oktoberfest for $65 shipped. I believe I could of gotten around $100 but oh wellA good price for Julysicle & Oktoberfest ?
^ Anyone ? :-X :'(
I just picked up an Apple Extended Keyboard II with white topres (possibly dampened) with all of its keys intact. There are a few scuffs around the edges and two or three gouges along the top. There is also a purely superficial scar across the keyboard. How much could this guy fetch?
Also, hate to **** out a bit, but if anybody is interested, just shoot me a PM.
I just picked up an Apple Extended Keyboard II with white topres (possibly dampened) with all of its keys intact. There are a few scuffs around the edges and two or three gouges along the top. There is also a purely superficial scar across the keyboard. How much could this guy fetch?
Also, hate to **** out a bit, but if anybody is interested, just shoot me a PM.
I just picked up an Apple Extended Keyboard II with white topres (possibly dampened) with all of its keys intact. There are a few scuffs around the edges and two or three gouges along the top. There is also a purely superficial scar across the keyboard. How much could this guy fetch?
Also, hate to **** out a bit, but if anybody is interested, just shoot me a PM.
What you're doing is not allowed as you're deliberately circumventing the minimum post rule to sell goods.
And, AFAIK, AEK IIs never came with White Alps, they only came with Salmon, Cream, or Mitsumi clones.
Just popped off the keys, the switches are solid white, so they could be Mitsumi clones, I'm not quite sure. And yeah, they're alps, not topres. Sorry about that mixup/
A good price for Julysicle & Oktoberfest ?
Where can I get Topre (RealForce) keycaps for a good price?
Show Image(http://i.imgur.com/sJOZmlT.jpg)
LZ-SE alone maybe all of it at once. Number 44 out of 44, the last one created
Black Eva case..
Note: the spacebar switch needs to be replaced seems to only actuate at a certain angle (must be the switch part)
-
Just an IC, probably not going anywhere
Where can I get Topre (RealForce) keycaps for a good price?
I think only topre produces the keycaps so you're best bet is EK or classifieds.
How much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
How much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
Really want to know the price
Show Image(http://i.imgur.com/sJOZmlT.jpg)
LZ-SE alone maybe all of it at once. Number 44 out of 44, the last one created
Black Eva case..
Note: the spacebar switch needs to be replaced seems to only actuate at a certain angle (must be the switch part)
-
Just an IC, probably not going anywhere
How much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
Really want to know the price
maybe nobody knows?
Show Image(http://i.imgur.com/sJOZmlT.jpg)
LZ-SE alone maybe all of it at once. Number 44 out of 44, the last one created
Black Eva case..
Note: the spacebar switch needs to be replaced seems to only actuate at a certain angle (must be the switch part)
-
Just an IC, probably not going anywhere
Show Image(http://i.imgur.com/sJOZmlT.jpg)
LZ-SE alone maybe all of it at once. Number 44 out of 44, the last one created
Black Eva case..
Note: the spacebar switch needs to be replaced seems to only actuate at a certain angle (must be the switch part)
-
Just an IC, probably not going anywhere
probably less with those scratches, but it would likely sell for what you paid for it - $3-450
LZ-F(irst) has like 10 boards, but the LZ-S(econd) was of higher quality. Probably $450 or so as a LZ-S with full LED's goes for like $530 or soHow much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
Really want to know the price
maybe nobody knows?
:eek: wow, lz-f is really rare?
Show Image(http://i.imgur.com/sJOZmlT.jpg)
LZ-SE alone maybe all of it at once. Number 44 out of 44, the last one created
Black Eva case..
Note: the spacebar switch needs to be replaced seems to only actuate at a certain angle (must be the switch part)
-
Just an IC, probably not going anywhere
probably less with those scratches, but it would likely sell for what you paid for it - $3-450
I repowder coated it :P But the spacebar needs to be fixed (switch problem).
Group buy price for case+pcb alone was $480+shipping, quite an expensive board >.<
---LZ-F(irst) has like 10 boards, but the LZ-S(econd) was of higher quality. Probably $450 or so as a LZ-S with full LED's goes for like $530 or soHow much is a 62g black lubed and stickered LZ-F with GMK Olivetti set & CMYK mods?Anyone knows?
Really want to know the price
maybe nobody knows?
:eek: wow, lz-f is really rare?
10 LZ-F
28 LZ-S
ever made
Checking price on an IBM F 5150 used but in good condition
I know the layout is funky
(Attachment Link)
Hello, I have a couple of new old stock (unused) IBM Model M13 keyboards with Trackpoint.
P/N 06H4173.
Build date: 02/04/1999
They are complete in original box. One is open and the other is sealed. I have seen used ones (black and white) go for between $100 - $200 on eBay but couldn't find any brand new ones let alone grey. Any input would be welcome, thanks!
The opened one is here:
(http://i.imgur.com/rFdFEJjh.jpg) (http://i.imgur.com/rFdFEJjh.jpg)
I have a factory unlocked iPhone 4 16gb black I'm looking to sell. Any idea what it's worth?
I have a factory unlocked iPhone 4 16gb black I'm looking to sell. Any idea what it's worth?
$200-250 depending on condition
I have a factory unlocked iPhone 4 16gb black I'm looking to sell. Any idea what it's worth?
$200-250 depending on condition
That was quick! Thanks! I see you're in Orlando, I'm actually living in Orlando now. Cool.
104 new, desoldered MX red switches?
104 new, desoldered MX red switches?
~$0.60-0.65/switch
104 new, desoldered MX red switches?
~$0.60-0.65/switch
Less if you want them to sell quickly.
104 new, desoldered MX red switches?
~$0.60-0.65/switch
Less if you want them to sell quickly.
104 new, desoldered MX red switches?
~$0.60-0.65/switch
Less if you want them to sell quickly.
I think that universally applies to anything that anyone is trying to sell.
104 new, desoldered MX red switches?
~$0.60-0.65/switch
Less if you want them to sell quickly.
I think that universally applies to anything that anyone is trying to sell.
That is actually not true.
In some chocolate fairs, people would just buy the highest priced chocolate the most. As they didn't have the knowledge to differentiate the types and such, they though that cost was a nice indicative. So the higher the cost, higher the sales.
They want to show their friends how much money they can spend.
Those people also use Topre keyboards :D
Exceptions to every rule. My wifes grandfather is a painter. He went to an art show one year and didn't sell a single painting. The host of the show came to him afterword and when her grandfather asked what the problem could be, the host said that his paintings were too cheap. People come to art shows to show off how much money they have. They want to show their friends how much money they can spend.
Those people also use Topre keyboards :D
How much is a Quickfire Rapid with mx blues and no logo above the keys worth?
Price check for a Model M 1391401, 1993.
Also, if I'm buying one, anything I should have the seller check before I make the purchase?
@Linkbane, I would pay like $75-$80 without original parts. With, $5 more?
Price Check: Poker X with Ergo-Clear Switches, with CCnG from round 1, and a white painted case
Sounds good to me -- other than basic pictures, any other good indicators of condition?
@Linkbane, I would pay like $75-$80 without original parts. With, $5 more?
Price Check: Poker X with Ergo-Clear Switches, with CCnG from round 1, and a white painted case
Bueller, not sure what controller you have on that...or if it supports LEDs...
Could be anywhere as low as $65 and as high as $130 depending on the parts you used and what it supports...but from the picture I'd say $100ish. Unless there is something about it i'm not noticing.
Checking price on an IBM F 5150 used but in good condition
I know the layout is funky
(Attachment Link)
Not a price check but do you know what type of key caps these are? Are they Cherry switch compatible. I really like it.
I have this bird in the hand.2 in the bush i believe.
How much is it worth?
I have this bird in the hand.More than 10 in the sky I believe.
How much is it worth?
How much is a Quick fire Rapid W/ Browns worth?
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
Filco White Ninja 104 w/ Reds... Only has about 2 weeks of use, so no shine...
how much cash for mx oktoberfest?
have these not been popping up in classifieds at all or did i just miss all of them?
How much does a 3D CC go for cash? Its always been my favorite, and I want one
How much is a DS3 YOTS worth with an ISO layout?
whats the sale price for night owl now that there are quite a few ?
whats the sale price for night owl now that there are quite a few ?
I think the going rate is around $200 shipped or just under that.
whats the sale price for night owl now that there are quite a few ?
whats the sale price for night owl now that there are quite a few ?
If you're a nice person, the price you paid for it. If you're a Clack profiteer, way too much.
whats the sale price for night owl now that there are quite a few ?
If you're a nice person, the price you paid for it. If you're a Clack profiteer, way too much.
whats the sale price for night owl now that there are quite a few ?
I think the going rate is around $200 shipped or just under that.
Price check:
HHKB Pro 2
60 key set of blank white topre keycaps ( ANSI-US)
Price check:
HHKB Pro 2
60 key set of blank white topre keycaps ( ANSI-US)
whats the sale price for night owl now that there are quite a few ?
I think the going rate is around $200 shipped or just under that.
alright thanks. will have to think about selling then. :)
whats the sale price for night owl now that there are quite a few ?
I think the going rate is around $200 shipped or just under that.
alright thanks. will have to think about selling then. :)
Literally 10 posts above this is the same key priced at 150.
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
Trade value of a Night Owl MX? I realized it's purely opinion based but what other clacks or desirables could I expect to be offered?
Not really versed in clacks and just want some idea of it's trade value.
I saw a post last week (from noisyturtle?) offering 150, but I believe is like ray said: it depends on how much the person values it :)
whats the sale price for night owl now that there are quite a few ?
how much is 60x mx brown that desolder out from a poker II? is $0.30 for 1 switch a reasonable price?
Does anyone know the going price for a Revenge red or a similar colour skull click clack would go for? Topre key cap also.
http://wiki.geekhack.org/images/f/f2/Revenge_Red_Skull_Clack.jpg (http://wiki.geekhack.org/images/f/f2/Revenge_Red_Skull_Clack.jpg)
how much is 60x mx brown that desolder out from a poker II? is $0.30 for 1 switch a reasonable price?
how much for 60 mx browns that were desoldered out from a poker II? is $0.30 for 1 switch a reasonable price?Considering that I think you can still get them new for $0.65 a few places, ebay $2.50/ea notwithstanding, and that it's looking like browns will be the next very-scarce MX switch, I'd say that's probably well into the generous end of reasonable. In other words, yes a good price but you could probably hold out for thirty five or forty cents each and still sell them all. ($18 for your suggested price, $21/$24 for my interpretations. Someone more experienced in current demand feel free to correct me)
Considering that I think you can still get them new for $0.65 a few places, ebay $2.50/ea notwithstanding, and that it's looking like browns will be the next very-scarce MX switch, I'd say that's probably well into the generous end of reasonable.
I suppose I could use the same logic for my half-finished desoldering job retrieving vintage blacks, but they're vintage, man ... that throws a kink into my calculations of the switches I have. So Can I politely bump my question that got drowned in the multi-quote of the same quote ... what do vintage blacks go for nowadays ?
Steelseries 6Gv2, MX Blacks, 6 months used, shiny spacebar.
Need a price for the following two boards:
Steelseries 6Gv2, MX Blacks, 6 months used, shiny spacebar.
IBM Model F XT, clean keycaps, all original
Need a price for the following two boards:
Steelseries 6Gv2, MX Blacks, 6 months used, shiny spacebar.
IBM Model F XT, clean keycaps, all original
Steelseries isn't a very sought after board so I agree with kenmai9. Maybe $60 to the right buyer and you would have better luck on Ebay.
On the IBM Model F XT you should be able to sell that for around $50 in really good condition. $40 if you want to sell it fast.
This doesn't include shipping cost though.
How much would 100 old, worn out blacks (so super smooth) in a new PCB mount switch case that used to hold clears be worth?
How much would 100 old, worn out blacks (so super smooth) in a new PCB mount switch case that used to hold clears be worth?
I sold my mix of old "new", "vintage," and "old but not vintage housing" blacks for $0.25 each with 10% extra switches with every order and Whiskeytango sold his for about the same. You might be able to get up to $0.50 each, but plain old old blacks aren't really going to sell for much more than $0.20-0.35 each.
I just bought a broken Cooler Master Storm QuickFire Pro with Cherry Reds from ebay. I will be harvesting all the switches from it. I only need 15 switches for my purposes, I plan on selling the rest.
I'm looking for suggestions for how to sell them. Person to person via PM? Ebay? Sell them individually or in sets of 5 or 10? The going rate for Cherry Reds?
I see a few Ebay stores selling them individually for $2.50. WASDKeyboards sells them for $2.00. Obviously if I undercut both of them I should sell theses switches rather quickly?
Yeah, I'm pretty sure that it's very easy to get switches for about 45˘, but you could probably sell them for 50-55˘. However, if they're broken from use rather than just being a defective board, I don't know if anyone would buy.
Price check on a barely used QFRS Green?
Yeah, I'm pretty sure that it's very easy to get switches for about 45˘, but you could probably sell them for 50-55˘. However, if they're broken from use rather than just being a defective board, I don't know if anyone would buy.
Price check on a barely used QFRS Green?
Stealth Greens are generally one of the higher priced QFR's when it comes to S/H prices, I'd say you'd probably get around $100 for it easily.
Yeah, I'm pretty sure that it's very easy to get switches for about 45˘, but you could probably sell them for 50-55˘. However, if they're broken from use rather than just being a defective board, I don't know if anyone would buy.
Price check on a barely used QFRS Green?
Stealth Greens are generally one of the higher priced QFR's when it comes to S/H prices, I'd say you'd probably get around $100 for it easily.
I see. However, I managed to get it for $110, and I've got an interested at $90 without shipping. Still okay?
Yeah, I'm pretty sure that it's very easy to get switches for about 45˘, but you could probably sell them for 50-55˘. However, if they're broken from use rather than just being a defective board, I don't know if anyone would buy.
Price check on a barely used QFRS Green?
Stealth Greens are generally one of the higher priced QFR's when it comes to S/H prices, I'd say you'd probably get around $100 for it easily.
I see. However, I managed to get it for $110, and I've got an interested at $90 without shipping. Still okay?
Yeah that sounds fair, a $20 hit is pretty good really.
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.
What specific version of the Model F? The Model F has multiple bodies and key layouts, http://deskthority.net/wiki/IBM_Model_F.
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
trrc selling blues in classifieds $60 for 110 shipped
Sherry with originative has browns they were on sale for $55 for 110 and you can get springs for 8 or 10.
Mkawa has lube don't remember how much.
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
trrc selling blues in classifieds $60 for 110 shipped
Sherry with originative has browns they were on sale for $55 for 110 and you can get springs for 8 or 10.
Mkawa has lube don't remember how much.
What? So blues are 54 cents each and browns are 50 cents not including shipping, but clears from a distributer (who need to profit more) are 50 cents each free shipping? What has this world turned into?
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
trrc selling blues in classifieds $60 for 110 shipped
Sherry with originative has browns they were on sale for $55 for 110 and you can get springs for 8 or 10.
Mkawa has lube don't remember how much.
100 clears, 100 browns, 100 blues, 100 blacks, and 100 62g springs, and lube ;)
Oh and also the beast switch tool
Thanks
You can buy clears from mechanical keyboards.com 100 for $49 shipped conus
What about blues? They have blues in only packs of 5
trrc selling blues in classifieds $60 for 110 shipped
Sherry with originative has browns they were on sale for $55 for 110 and you can get springs for 8 or 10.
Mkawa has lube don't remember how much.
How much would used blues cost? Also how bad are the quality of used switches?
Price Check:
Original Poker w/Blues
Blue anodized aluminum tray
also the original tray
Original caps w/ no shine
Original box
used but mint
thanks!
Price Check:
Original Poker w/Blues
Blue anodized aluminum tray
also the original tray
Original caps w/ no shine
Original box
used but mint
thanks!
bump cuz my post got eaten
Got another thing to PC:
Model F, clean, needs a teensy to use with USB
Is $40 shipped a good price?
GMK Dolch with extension keys?
Edit: as pictured here http://geekhack.org/index.php?topic=43737.msg986275#msg986275
Thanks!GMK Dolch with extension keys?
Edit: as pictured here http://geekhack.org/index.php?topic=43737.msg986275#msg986275
I believe if/when this sells at originative it will be in the range of at least ~$145 plus shipping.
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.
What specific version of the Model F? The Model F has multiple bodies and key layouts, http://deskthority.net/wiki/IBM_Model_F.
AT...
the_beast switch tool.
Just need to know how much they cost at the GB
Brand new HHKB Model in box: PD-KB400B Dark Gray.
Just got it from EK last week... Never used - Too advanced for me for now.
How much should i list it for ?
Brand new HHKB Model in box: PD-KB400B Dark Gray.
Just got it from EK last week... Never used - Too advanced for me for now.
How much should i list it for ?
The problem is really the form factor.
I unfortunately need a 104 keys black to use in my (corporate) office, where the nails that stands out gets hammered...
The problem is really the form factor.
I unfortunately need a 104 keys black to use in my (corporate) office, where the nails that stands out gets hammered...
Well then perhaps try the type heaven, it looks more 'normal'
:-[ I have regretted this post for a while now :-[
Scarlett - Vortex Red Aluminum case, Klaxon keycaps (new), and brand new Filco MJ2 internals (no mods).
Pattie - CM QFR w/greens (used but very clean, no mods), painted metallic green case, and CCnG set (newest GB, still waiting for ^,6).
Poker 2 - MX Blues (used but very clean, no mods), unused keycaps, and everything that comes in the box.
CM QFR - MX Black (used but very clean, no mods), red painted top case, ducky shine caps (used), with original box.
Be gentle. :-\
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.
What specific version of the Model F? The Model F has multiple bodies and key layouts, http://deskthority.net/wiki/IBM_Model_F.
AT...
If you need a Soarer mod, it's not an AT. If it needs the Soarer mod, it's likely an XT or 122 key terminal and those generally go for $50-100 shipped, though $50-70 is more realistic. If it is an AT, those can go for $120-200, depending on the shape it's in, the rust on the plate, and so on.
Scarlett - Vortex Red Aluminum case, Klaxon keycaps (new), and brand new Filco MJ2 internals w/browns(no mods).
Pattie - CM QFR w/greens (used but very clean, no mods), painted metallic green case, and CCnG set (newest GB, still waiting for ^,6).
Poker 2 - MX Blues (used but very clean, no mods), unused keycaps, and everything that comes in the box.
CM QFR - MX Black (used but very clean, no mods), red painted top case, ducky shine caps (used, cleaned, already shiny, and allow for back lighting), with original box.
I'm not sure why you are questioning if it is an AT. Trust me it is. It doesn't need the Soarer mod but I was going to do it like for my other one so I can use a usb cable and change some keys around. But thanks for the estimates. :)
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.
I'm not sure why you are questioning if it is an AT. Trust me it is. It doesn't need the Soarer mod but I was going to do it like for my other one so I can use a usb cable and change some keys around. But thanks for the estimates. :)
Well, you gave an answer that seemed uncertain and some people think XT is AT since they have the same 5 pin DIN connector. Since you didn't provide a picture and said it needed a Soarer, it's a reasonable assumption that it's not an AT. Didn't mean to offend, but you didn't seem certain, so I'll question someone if they seem uncertain.
My extra IBM AT Model F, very good condition, I replaced the foam with a rubber mat, sanded off the rust on the metal plate. I was planning on doing the Soarer mod on this one but haven't had the will/time. Thanks.I'm not sure why you are questioning if it is an AT. Trust me it is. It doesn't need the Soarer mod but I was going to do it like for my other one so I can use a usb cable and change some keys around. But thanks for the estimates. :)
Well, you gave an answer that seemed uncertain and some people think XT is AT since they have the same 5 pin DIN connector. Since you didn't provide a picture and said it needed a Soarer, it's a reasonable assumption that it's not an AT. Didn't mean to offend, but you didn't seem certain, so I'll question someone if they seem uncertain.
My original post seems uncertain? I never said I "needed" anything, just that I was planning on doing the mod.
HHKB Pro 2 (Gray) from EK
3 Star Leather Wrist Rest from EK
Carrying Case for HHKB from EK
Got the whole kit about a month ago, but I'm finding that I just can't get along without a dedicated six key cluster at work.
:-[ I have regretted this post for a while now :-[
Scarlett - Vortex Red Aluminum case, Klaxon keycaps (new), and brand new Filco MJ2 internals (no mods).
Pattie - CM QFR w/greens (used but very clean, no mods), painted metallic green case, and CCnG set (newest GB, still waiting for ^,6).
Poker 2 - MX Blues (used but very clean, no mods), unused keycaps, and everything that comes in the box.
CM QFR - MX Black (used but very clean, no mods), red painted top case, ducky shine caps (used), with original box.
Be gentle. :-\
I just won the drawing for EK's Clack Factory Gummyrot Green Skull Keycap (Topre) (https://elitekeyboards.com/products.php?sub=access,toprekeys&pid=cf_5t_sku_grg). How much would it sell for, or does it just depend on how much enthusiasts want it?
I just won the drawing for EK's Clack Factory Gummyrot Green Skull Keycap (Topre) (https://elitekeyboards.com/products.php?sub=access,toprekeys&pid=cf_5t_sku_grg). How much would it sell for, or does it just depend on how much enthusiasts want it?
Well, you can't sell it here because you don't have 60 posts. As for price, I'll give my boilerplate response. If you don't want it, don't be an ******* and jack up the price. Instead, sell it at cost. Do something like I did with my Hack Orange CC Skull sale (http://geekhack.org/index.php?topic=49199.0) and get it to a deserving member.
I just won the drawing for EK's Clack Factory Gummyrot Green Skull Keycap (Topre) (https://elitekeyboards.com/products.php?sub=access,toprekeys&pid=cf_5t_sku_grg). How much would it sell for, or does it just depend on how much enthusiasts want it?
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.
Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
So even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
So even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
Yeah, this doesn't seem like the best method. Account age matters more than posts in my opinion. Even PPD would be better.BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
Yeah, this doesn't seem like the best method. Account age matters more than posts in my opinion. Even PPD would be better.BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
.014 ppd seems legit :))Yeah, this doesn't seem like the best method. Account age matters more than posts in my opinion. Even PPD would be better.BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
PPD = post per day
seems legit! I like this guy.
.014 ppd seems legit :))Yeah, this doesn't seem like the best method. Account age matters more than posts in my opinion. Even PPD would be better.BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
PPD = post per day
seems legit! I like this guy.
.014 ppd seems legit :))I joined a while ago to ask about getting a Triforce keycap and forgot about the place, but then I won that CC and figured I'd come back to at least see what I could get for it. I didn't really want to make a new profile either since that's against a lot of websites' TOS.
.014 ppd seems legit :))I joined a while ago to ask about getting a Triforce keycap and forgot about the place, but then I won that CC and figured I'd come back to at least see what I could get for it. I didn't really want to make a new profile either since that's against a lot of websites' TOS.
Yeah, what about it? :-\ I know ppd is post per day, and he only has a .014 ppd and he brought it up..014 ppd seems legit :))Yeah, this doesn't seem like the best method. Account age matters more than posts in my opinion. Even PPD would be better.BRB: Gotta spam random threads :PSo even if I were to provide email proof (http://i.imgur.com/jbrz308.png) and a timestamp of me with the cap when I get it, I can't sell it?Sorry, I'm relatively new to Geekhack. All I know is that they can sell for up to $100 or more, but I wasn't sure if the skulls were worth more or less than his other caps since I've seen some people with a dozen or more on one keyboard.Regardless of the unwritten rules about clacks, you would probably have trouble selling it in the first place since you only have 3 posts and most (smart) people will not deal with someone who is new like you are.
Damn, guess I'll just keep it then.
Site rules state you must have 60 posts to use the classifieds.
PPD = post per day
seems legit! I like this guy.
No I meant about PPD = post per day ;)
Well it won't ship for a few days so I guess that's what I'll end up doing xD
Because he is "not a keyboard addict" :(.014 ppd seems legit :))I joined a while ago to ask about getting a Triforce keycap and forgot about the place, but then I won that CC and figured I'd come back to at least see what I could get for it. I didn't really want to make a new profile either since that's against a lot of websites' TOS.
yes two accounts will get you the ban hammer :eek:
to answer the question, it is worth whatever someone will pay you for it. sadly that does drive up clack prices but it is what it is.
why not stick around and be a part of the community and after a whle you'll have your 60 posts and you can put it up for sale or even trade if that is what you want to do.
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Someone will always frown upon every scenario involving Clacks. I've even seen a few people complain about them being given away.
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
The butt hurt doesn't last forever but there will be butt hurt. ;)
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Someone will always frown upon every scenario involving Clacks. I've even seen a few people complain about them being given away.
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Someone will always frown upon every scenario involving Clacks. I've even seen a few people complain about them being given away.
Immediately auctioning clacks will be a shot to fame though :))
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Someone will always frown upon every scenario involving Clacks. I've even seen a few people complain about them being given away.
Immediately auctioning clacks will be a shot to fame though :))
Are auctions for CC frowned upon? I am thinking about doing this....call me a sumbag but as much as I hate to say it, the world runs on money. Just don't want to be exiled from the community :D
Someone will always frown upon every scenario involving Clacks. I've even seen a few people complain about them being given away.
Immediately auctioning clacks will be a shot to fame though :))
Not the good kind of fame though.
From the replies I got, it seems like it.
This place is still a lot less aggressive than other online communities though.
I do not think it is all that irrational to be mad about it, if you needed the money you should have not entered and just saved your money. Otherwise you obviously look like you just entered to make money off of it.
But at the end of the day, if the buyer and seller are happy about the price, so be it.
I personally do not see a clack selling for around or under 100 that bad, but the 300 they go for is just crazy.
What would an Oktoberfest MX CC cost?
I don't have one, and I'm just wondering what I'd be looking at to acquire one, and if it's not exorbitantly massive.
What would an Oktoberfest MX CC cost?
I don't have one, and I'm just wondering what I'd be looking at to acquire one, and if it's not exorbitantly massive.
They used to go for $50-70 but with all the recent craziness it's hard to say.
There's a lot of insanity, but there are also some good people on here. Post a wanted thread if you haven't already and try for that Clack. You may get lucky, especially if you offer good beer as part of the trade.A wanted thread? Could you do this newb a favor and enlighten me?
A straight-up sale, with a listed price no higher than retail, would be the best option.
After that, a sale with a listed price (without restriction), would be preferable.
eBay auction would be okay.
Forum auction should not even be an option. With eBay, there are protections for both buyer and seller, as long as things are done correctly and above-board. Neither the buyer nor the seller have any protections or recourse if things go awry with a forum auction.
How much are a red cherry DS enter cost? Is it less than or equal to the $4 EK charges?
ITzNybble I wanted to create a rhyme for you, unfortunately im not a very good poet.
There was a guy called Rarar,
Now no-one likes him.
The End.
Jimmies have been rustled, its too late to unwrustle :p
How much are a red cherry DS enter cost? Is it less than or equal to the $4 EK charges?
Do you mean one made by Cherry? Are you sure they were even made before? Never seen one for sale.
How much is a candy corn blank and candy corn skull worth?
$250 for the skull, is it really worth that ?
$250 for the skull, is it really worth that ?
Hey,
What would it cost me at present to get a Klaxon set RoW alphas and WoR Mods?
Also a Raindrop set?
thanks!
Coolermaster XT fullsize board with stock mx white switches. In like new condition. White box sample. 2 or 3 keys don't click at all and maybe a few that click a little different, this seems par for the course for boards with white switches.
These are what, $90 retail? Did you purchase it with whites, or is it modded?
Coolermaster XT fullsize board with stock mx white switches. In like new condition. White box sample. 2 or 3 keys don't click at all and maybe a few that click a little different, this seems par for the course for boards with white switches.
These are what, $90 retail? Did you purchase it with whites, or is it modded?Coolermaster XT fullsize board with stock mx white switches. In like new condition. White box sample. 2 or 3 keys don't click at all and maybe a few that click a little different, this seems par for the course for boards with white switches.
Amazon prices range from $89.99 (blue), $94.99 (brown), $99.99 (red), $129.99 (green) depending on switch type.
These are what, $90 retail? Did you purchase it with whites, or is it modded?Coolermaster XT fullsize board with stock mx white switches. In like new condition. White box sample. 2 or 3 keys don't click at all and maybe a few that click a little different, this seems par for the course for boards with white switches.
Amazon prices range from $89.99 (blue), $94.99 (brown), $99.99 (red), $129.99 (green) depending on switch type.
I was going by the prices listed on the Coolermaster USA Store. The green switch version there is $119.99. So those prices you listed are probably a good example. If you take the $129 for the more "exotic" green switch, and maybe knock off 10% for used. That's what I would do. Only you know what you paid for it, though.
How much for 90 plate mounted mx blue switches (brand new) & 100 plate mounted mx white switches (brand new)?
I don't know if I can comment on Whites since they're less common, but probably anywhere from $0.75 to $1.25 each.
I don't know if I can comment on Whites since they're less common, but probably anywhere from $0.75 to $1.25 each.
New from 7bit they cost about 0.87$.
All about the same. Some people will pay more for "vintage" Blues and Blacks, but they're all about the same. I'd say Browns and Reds might have to be sold for less since they don't seem to be as popular.
All about the same. Some people will pay more for "vintage" Blues and Blacks, but they're all about the same. I'd say Browns and Reds might have to be sold for less since they don't seem to be as popular.
I haven't heard of vintage blues before, do they have a different sound or something?
All about the same. Some people will pay more for "vintage" Blues and Blacks, but they're all about the same. I'd say Browns and Reds might have to be sold for less since they don't seem to be as popular.
I haven't heard of vintage blues before, do they have a different sound or something?
All about the same. Some people will pay more for "vintage" Blues and Blacks, but they're all about the same. I'd say Browns and Reds might have to be sold for less since they don't seem to be as popular.
I haven't heard of vintage blues before, do they have a different sound or something?
http://deskthority.net/photos-videos-f8/cherry-mx-old-vs-new-t139.html
In your opinion how much would be a gasmask? really don't care much about which one since i like them all
Does anyone know how much superhero (boost) keycaps go for?
whats a Ducky Year of the Rabbit MX Brown worth?
number 198/034
I actually don't have the Ducky USB cable, so i guess that'll affect the sales
Keyboard's in mint condition along with the white PBT engraved caps.
Have the Bag and the Box and the Lavender WASD keys and Plastic cap pullerShow Image(http://i.imgur.com/993CNK0.jpg)
Anyone remember a while ago boost (I think) was selling the metal sc2 race icon caps but I can't remember how much for? Anyone have an idea??
Thanks :)
This entire lot of novelty keys in one bundle:Show Image(http://i.imgur.com/cwBvZXi.jpg)
This entire lot of novelty keys in one bundle:Show Image(http://i.imgur.com/cwBvZXi.jpg)
$80-90 would probably be a steal, you might get $110-120 depending on buyer.
ps: is the black on beige caps lock center stemmed?
How much would a RealForce 87u black case cost?
And do you think it would be easier to find someone to trade a black case for a white case?
How much would a RealForce 87u black case cost?
And do you think it would be easier to find someone to trade a black case for a white case?
How much for a QFR MX-Green, barely used w/ original box and DSA Retro
I asked Gliss a while back if it was okay to sell the keyboard I won because not only did I get laid off once, then found work, I then got laid off again and it's killed me since having no job. With Xmas coming up and having a daughter, I really need to be able to get everything I want for her.
So I was wondering how much I'd get for this?Show Image(http://geekhack.org/index.php?action=dlattach;topic=43163.0;attach=20837;image)
I don't want to feel like I've let down GeekHack in any shape or form for having to sell this keyboard. I've had tremendous amounts of help from this website when I got laid off and I'm so thankful.
Filco with blue switches. Custom metallic green paint job. Imsto double shots. Function row and side key things with relegendable caps. Red, green and blue shift, control and alt. And a GH key as you can see.
Filco with blue switches. Custom metallic green paint job. Imsto double shots. Function row and side key things with relegendable caps. Red, green and blue shift, control and alt. And a GH key as you can see.
Are you sure those aren't cherry doubleshots?
Filco with blue switches. Custom metallic green paint job. Imsto double shots. Function row and side key things with relegendable caps. Red, green and blue shift, control and alt. And a GH key as you can see.
Filco with blue switches. Custom metallic green paint job. Imsto double shots. Function row and side key things with relegendable caps. Red, green and blue shift, control and alt. And a GH key as you can see.
Are you sure those aren't cherry doubleshots?
Oh, maybe. I went on originative and checked their imsto's and looked same. I'm not completely clued up on it to be honest.
http://i.imgur.com/19ZX9Hb.jpg
Thanks for the help, Ray. Appreciated, buddy. <3
Oh, right, awesome! But yeah, I'm still stuck on a price, haha. Like Gliss said the relegendables are pretty rare, too. o_o
Filco with blue switches. Custom metallic green paint job. Imsto double shots. Function row and side key things with relegendable caps. Red, green and blue shift, control and alt. And a GH key as you can see.
You could probably start at $250 and work your way down from there, if you don't get any bites. If you need to sell quickly, 20% off that would probably move it fast.
Where can i get a tkl/60% set of White and grey cherry keycaps? And how much would they be?
These to be exact.Show Image(http://img39.imageshack.us/img39/8336/pokerblue.jpg)
(Picture is from MMB's blowout sale)
Where can i get a tkl/60% set of White and grey cherry keycaps? And how much would they be?
These to be exact.Show Image(http://img39.imageshack.us/img39/8336/pokerblue.jpg)
(Picture is from MMB's blowout sale)
From sherryton on Originative, approx $90+
Where can i get a tkl/60% set of White and grey cherry keycaps? And how much would they be?
These to be exact.Show Image(http://img39.imageshack.us/img39/8336/pokerblue.jpg)
(Picture is from MMB's blowout sale)
From sherryton on Originative, approx $90+
I looked over on their vendor forum and sad to my eyes i found out that the keycaps i wanted where 130$ :eek:
Okay. So I am misinformed :p Sorry :-[
Where can i get a tkl/60% set of White and grey cherry keycaps? And how much would they be?
These to be exact.Show Image(http://img39.imageshack.us/img39/8336/pokerblue.jpg)
(Picture is from MMB's blowout sale)
From sherryton on Originative, approx $90+
I looked over on their vendor forum and sad to my eyes i found out that the keycaps i wanted where 130$ :(
Where can i get a tkl/60% set of White and grey cherry keycaps? And how much would they be?
These to be exact.Show Image(http://img39.imageshack.us/img39/8336/pokerblue.jpg)
(Picture is from MMB's blowout sale)
From sherryton on Originative, approx $90+
I looked over on their vendor forum and sad to my eyes i found out that the keycaps i wanted where 130$ :(
Nope, $100 + shipping. (http://www.originativeco.com/collections/keysets-1/products/classic-beige)
What would you guys pay for a very lightly used ducky shine 3 with red switches?
Can anybody tell me what is the cheapest that i can get a used Sanctuary TKL set? I don't care if it shiny or something like this i really want one but the high cost of a brand new is waaaay out of my pocket. Thanks in advance to everybody that might be able to help me :)
I saw this but 60$ + shipping is out of my limit so i am wondering if i can get any (even shinny and stuff) for less then that. And thanks for the response :)Can anybody tell me what is the cheapest that i can get a used Sanctuary TKL set? I don't care if it shiny or something like this i really want one but the high cost of a brand new is waaaay out of my pocket. Thanks in advance to everybody that might be able to help me :)
dustin in classifieds is selling his, send him a PM
I saw this but 60$ + shipping is out of my limit so i am wondering if i can get any (even shinny and stuff) for less then that.Can anybody tell me what is the cheapest that i can get a used Sanctuary TKL set? I don't care if it shiny or something like this i really want one but the high cost of a brand new is waaaay out of my pocket. Thanks in advance to everybody that might be able to help me :)
dustin in classifieds is selling his, send him a PM
Ok, thank you very much for the info! I will then wait some time and hopefully some day i might have one of those sets :DI saw this but 60$ + shipping is out of my limit so i am wondering if i can get any (even shinny and stuff) for less then that.Can anybody tell me what is the cheapest that i can get a used Sanctuary TKL set? I don't care if it shiny or something like this i really want one but the high cost of a brand new is waaaay out of my pocket. Thanks in advance to everybody that might be able to help me :)
dustin in classifieds is selling his, send him a PM
Probably not. Sanctuary sets are still too new to be showing major signs of wear, doubt you'll see them for any less that $60 any time soon.
Hi!
I'd like to know what my 7 month old Ducky DK9008 Shine II White LED with MX Clears is worth. It's in excellent condition with box and contents.
Hi!
I'd like to know what my 7 month old Ducky DK9008 Shine II White LED with MX Clears is worth. It's in excellent condition with box and contents.
O.O where did you get that?
Hi!
I'd like to know what my 7 month old Ducky DK9008 Shine II White LED with MX Clears is worth. It's in excellent condition with box and contents.
O.O where did you get that?
MechanicalKeyboards.com back in May. I used it until a few weeks ago, and then switched to a RealForce 45g.
OHi!
I'd like to know what my 7 month old Ducky DK9008 Shine II White LED with MX Clears is worth. It's in excellent condition with box and contents.
O.O where did you get that?
MechanicalKeyboards.com back in May. I used it until a few weeks ago, and then switched to a RealForce 45g.
Nice. I bought mine in may also. I know one sold for about $125 a while back.
RF 10th Anniversary Edition with silenced ergo weighting? I saw it in a store for $387 (HKD equivalent) and am wondering if this is a good price. I mean, the one in Jcrouse's mega sale went for 350.:( anyone?
RF 10th Anniversary Edition with silenced ergo weighting? I saw it in a store for $387 (HKD equivalent) and am wondering if this is a good price. I mean, the one in Jcrouse's mega sale went for 350.:( anyone?
I have never posted here before, I kind of stay away for weeks at a time because I am fearful.
What is a stock IBM Model M 122-key terminal keyboard worth? Good condition, complete, tested, 240-degree DIN plug.
Thanks
Do I need 60 posts to ask what something is worth?
Thanks
I have never posted here before, I kind of stay away for weeks at a time because I am fearful.
What is a stock IBM Model M 122-key terminal keyboard worth? Good condition, complete, tested, 240-degree DIN plug.
Thanks
Just saw some of these on eBay for $50 shipped, but the condition was questionable.
You could probably get twice that for a nice specimen, I would think.
1x Topre nightowl CC
1x Buckling Spring revenge red CC
100x Cherry MX white switches
1x IBM F 122 (converted to USB with internal teensy 2.0)--good condition
1x Topre nightowl CC
1x Buckling Spring revenge red CC
100x Cherry MX white switches
1x IBM F 122 (converted to USB with internal teensy 2.0)--good condition
On the CC's it all depends on if you want to make mad $$$ or not ;)
1x Topre nightowl CC
1x Buckling Spring revenge red CC
100x Cherry MX white switches
1x IBM F 122 (converted to USB with internal teensy 2.0)--good condition
On the CC's it all depends on if you want to make mad $$$ or not ;)
I paid mad money for them, so I'm not going to sell them for cheap.
So, hypothetically ...
Lets say I were to acquire a 75% FaceW (spirit's GB) board and acrylic case and aluminum plate, and put vintage blacks and their matching mostly colorless doubleshots (after cleaning most of the grunge off them) would I be able to sell that for $225 most likely? More, or less?
Would acquiring, say a neglected tai hao set with good colors and fewer hours improve the perceived value by enough to justify buying it for flipping? Is there something else you see as being the best bet for trying to flip parts into a complete keyboard sale?
Obviously, I'm planning on trying to provide a little lubricant to my future purchases here ;-) keep the economy going.
Asking for a friend.
He has a Choc Mini black model with browns. How much are they worth?
Hey, I have two keyboards I'm looking to sell and I don't really have any idea what they are worth.
The first is a Cherry G80-3190HDU.Show Image(http://i.imgur.com/4u8ljQ4.jpg)Good condition, comes with a PS/2 adapter.
The other is a WYSE WY60. Also in good condition.Show Image(http://i.imgur.com/Syf6dCz.jpg)
Thanks!
Hey, I have two keyboards I'm looking to sell and I don't really have any idea what they are worth.
The first is a Cherry G80-3190HDU.Show Image(http://i.imgur.com/4u8ljQ4.jpg)Good condition, comes with a PS/2 adapter.
The other is a WYSE WY60. Also in good condition.Show Image(http://i.imgur.com/Syf6dCz.jpg)
Thanks!
Hey, I have two keyboards I'm looking to sell and I don't really have any idea what they are worth.
The first is a Cherry G80-3190HDU.Show Image(http://i.imgur.com/4u8ljQ4.jpg)Good condition, comes with a PS/2 adapter.
The other is a WYSE WY60. Also in good condition.Show Image(http://i.imgur.com/Syf6dCz.jpg)
Thanks!
Wyse with vintage blacks ? ^-^
Hey, I have two keyboards I'm looking to sell and I don't really have any idea what they are worth.
The first is a Cherry G80-3190HDU.Show Image(http://i.imgur.com/4u8ljQ4.jpg)Good condition, comes with a PS/2 adapter.
The other is a WYSE WY60. Also in good condition.Show Image(http://i.imgur.com/Syf6dCz.jpg)
Thanks!
That G80 is gorgeous.
Hey, I have two keyboards I'm looking to sell and I don't really have any idea what they are worth.
The first is a Cherry G80-3190HDU.Show Image(http://i.imgur.com/4u8ljQ4.jpg)Good condition, comes with a PS/2 adapter.
The other is a WYSE WY60. Also in good condition.Show Image(http://i.imgur.com/Syf6dCz.jpg)
Thanks!
Wyse with vintage blacks ? ^-^
How much is the wyse set in my WTS thread worth? Thanks! :)
http://geekhack.org/index.php?topic=50480.0
How much is the wyse set in my WTS thread worth? Thanks! :)
http://geekhack.org/index.php?topic=50480.0
Thin ABS? Looks like shine on some of the Alphas? I wouldn't pay more than $60-70 for it, some might pay more, but good thin ABS Wyse sets come up pretty often for $10-20 and you can grab a moogle for $30-45.
100x Black alps from a new unused AT101W? Are they worth anything at all?
What have you done to it? I would love a brand new AT101W.
100x Black alps from a new unused AT101W? Are they worth anything at all?
What have you done to it? I would love a brand new AT101W.
It's in pieces waiting for me to desolder the switches! :P
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
They were freebies that jcrouse gave him because he bought stuff from him in the mega sell thread.How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
Yes I did. Some that he gave me I have a use for, but for these I don't have use. Wanted to see if they're worth shipping out to someone as they just collect dust on me.
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
Yes I did. Some that he gave me I have a use for, but for these I don't have use. Wanted to see if they're worth shipping out to someone as they just collect dust on me.
Just FYI, it's generally considered bad form to resell something that was given to you. Of course, something that was given to you is yours to do with as you wish, but you will be looked at in a negative light by many for making profit off another's generosity, even if it's only a few dollars in this case.
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
Yes I did. Some that he gave me I have a use for, but for these I don't have use. Wanted to see if they're worth shipping out to someone as they just collect dust on me.
Just FYI, it's generally considered bad form to resell something that was given to you. Of course, something that was given to you is yours to do with as you wish, but you will be looked at in a negative light by many for making profit off another's generosity, even if it's only a few dollars in this case.
Oh okay. Just didn't like to have keys lying around that I don't use. Thanks for the help!
How much is:
RGB Mods-- I think they're absShow Image(http://i.imgur.com/Gh73pYo.jpg)
WASD keys from some board, I don't know where. I think they're abs with pad printingShow Image(http://i.imgur.com/DzUnOcI.jpg)
Steelseries key. Really thick, the legends are etched and then filled in. seems like pbt or really thick absShow Image(http://i.imgur.com/yBE5Gwb.jpg)
Didn't you get those free?
Yes I did. Some that he gave me I have a use for, but for these I don't have use. Wanted to see if they're worth shipping out to someone as they just collect dust on me.
Just FYI, it's generally considered bad form to resell something that was given to you. Of course, something that was given to you is yours to do with as you wish, but you will be looked at in a negative light by many for making profit off another's generosity, even if it's only a few dollars in this case.
Oh okay. Just didn't like to have keys lying around that I don't use. Thanks for the help!
Did you join bunny's secret Santa? ;)
3D cc MX? :)
Oh ok, HO mx then?3D cc MX? :)
$70-100
Oh ok, HO mx then?3D cc MX? :)
$70-100
Oh Thought both was worth more! Ty anyways!Oh ok, HO mx then?3D cc MX? :)
$70-100
$60-90
What's a used DasKeyboard Ultimate Model S, with one missing cap, one broken stem, blue worth?
What's a used DasKeyboard Ultimate Model S, with one missing cap, one broken stem, blue worth?
Price check on (almost) BIN Siig Minitouch w/ Monterey Blues? Taken out of box for a day to test switches and functionality. Shrink wrap still on most of the package.
Could someone please give estimates on what the following keyboards are worth used?
1. Das Pro model S with Media keys and brown switches, costar stabs.
2. FC660M with clears.
3. Realforce 87u.
4. Poker 2 with browns.
Thank you very much!
Could someone please give estimates on what the following keyboards are worth used?
1. Das Pro model S with Media keys and brown switches, costar stabs.
2. FC660M with clears.
3. Realforce 87u.
4. Poker 2 with browns.
Thank you very much!
What weight is the realforce?
Could someone please give estimates on what the following keyboards are worth used?
1. Das Pro model S with Media keys and brown switches, costar stabs.
2. FC660M with clears.
3. Realforce 87u.
4. Poker 2 with browns.
Thank you very much!
What weight is the realforce?
Please be 55gr!!! I buy now!
1. Das Pro model S with Media keys and brown switches, costar stabs. ($75-90, they don't usually sell around here to well but Ebay it would sell quick.
2. FC660M with clears. ($100-$115, depending on how used)
3. Realforce 87u ($200-$220, depending on how used, if it is a 55gr it will sell for a little more and quickly)
4. Poker 2 with browns. ($90-$100, depending on how used. Stancato might still be looking for one too.)
how much is a julysikle worth?I think jcrouse is pretty accurate with his pricing!
how much is a julysikle worth?I think jcrouse is pretty accurate with his pricing!
how much is a julysikle worth?
how much is a julysikle worth?
seriously, if you don't have the money just don't do it man
Ye I guess you where the fastest one after me so you deserve to get it, though I´m a bit more familiar with dubs!how much is a julysikle worth?
seriously, if you don't have the money just don't do it man
julysikle is my dream cc. I don't know if I have another chance to get one. dubs already has a bunch and he's still buying them up
julysikle is my dream cc. I don't know if I have another chance to get one. dubs already has a bunch and he's still buying them up
how much is a julysikle worth?
Ye I was kinda expecting you to something like that...julysikle is my dream cc. I don't know if I have another chance to get one. dubs already has a bunch and he's still buying them up
I've never paid more then retail for a julysicle...I do know how to trade tho :p
julysikle is my dream cc. I don't know if I have another chance to get one. dubs already has a bunch and he's still buying them up
I've never paid more then retail for a julysicle...I do know how to trade tho :p
http://geekhack.org/index.php?topic=51799.msg1141853#msg1141853
Because trading money for goods is not the same as paying for something, right?
http://geekhack.org/index.php?topic=51799.msg1141853#msg1141853
Because trading money for goods is not the same as paying for something, right?
Did i ever buy the julysicle? :eek:
http://geekhack.org/index.php?topic=51799.msg1141853#msg1141853
Because trading money for goods is not the same as paying for something, right?
Did i ever buy the julysicle? :eek:
Oh, so you give your word you want to purchase something for sale, then renege so that you can maintain your falsity of never obtaining a Julysicle for more than retail?
Okay, I didn't get much help for my last post so I am going to be more specific on what I need appraised.
Quickfire Rapid MX Blues (ghetto green)
-80g Originiative Springs
-Black Switch Stickers
-White Painted Top (no clear coat if that really matters)
-White PBT Banggood Keycaps
-Sanded Mounting Plate (Not sure if that hurt, helped or won't effect resale value, I just coated it in some white lithium to prevent rust)
Pics, it looks really nice imoShow Image(http://cdn.overclock.net/e/e5/900x900px-LL-e578e3f9_DSC_0201.jpeg)Show Image(http://cdn.overclock.net/3/3d/900x900px-LL-3d69e9e0_DSC_0198.jpeg)
Okay, I didn't get much help for my last post so I am going to be more specific on what I need appraised.
Quickfire Rapid MX Blues (ghetto green)
-80g Originiative Springs
-Black Switch Stickers
-White Painted Top (no clear coat if that really matters)
-White PBT Banggood Keycaps
-Sanded Mounting Plate (Not sure if that hurt, helped or won't effect resale value, I just coated it in some white lithium to prevent rust)
Pics, it looks really nice imoShow Image(http://cdn.overclock.net/e/e5/900x900px-LL-e578e3f9_DSC_0201.jpeg)Show Image(http://cdn.overclock.net/3/3d/900x900px-LL-3d69e9e0_DSC_0198.jpeg)
First of all that is an amazing looking board. Knowing that it doesn't have a clear coat makes me want to buy it just to give some custom paint work. :p
I would have to say that you could charge around $140. Maybe $160 to the right person.
Keyboard = $60
Keycaps = $20
Painted case = $15
Spring mod = $10
Lube job = $10 (I'm assuming it's lubed too)
Stickers = $5
Total work spent on it = $20
How much for a lightly used-new set of topre white blanks cost from someone do you guys think?
Probably should have said 87u set to be exact. So i'm guessing that would be like 110$? Since ek seems like they won't re stock those damn keycaps..How much for a lightly used-new set of topre white blanks cost from someone do you guys think?
Honestly, almost retail price. Probably around $70 for an HHKB set.
Probably should have said 87u set to be exact. So i'm guessing that would be like 110$? Since ek seems like they won't re stock those damn keycaps..How much for a lightly used-new set of topre white blanks cost from someone do you guys think?
Honestly, almost retail price. Probably around $70 for an HHKB set.
Price check: DAS keyboard ultimate (no lettering), cherry blue, with media keys. Lightweight scratching but nothing unusual, buy a new one and two weeks later it's going to look like mine (shiny plastic, you can't avoid it).
A very near mint '93 IBM SSK with one piece caps and cable.
A very near mint '93 IBM SSK with one piece caps and cable.
Tin sold his for 160, but I think you could get more in the current market.
A very near mint '93 IBM SSK with one piece caps and cable.
Tin sold his for 160, but I think you could get more in the current market.
Yeah, I'm thinking $185+
$280-$350 on eBay. Easy.
A very near mint '93 IBM SSK with one piece caps and cable.
Tin sold his for 160, but I think you could get more in the current market.
Yeah, I'm thinking $185+$280-$350 on eBay. Easy.
I'd say 127001 (you should post more, a long time for the 100000 posts you need) is right. Those 3 NIB were sold for a BO on a 3k listing, so 300 is a decent estimate.
A very near mint '93 IBM SSK with one piece caps and cable.
Tin sold his for 160, but I think you could get more in the current market.
Yeah, I'm thinking $185+$280-$350 on eBay. Easy.
I'd say 127001 (you should post more, a long time for the 100000 posts you need) is right. Those 3 NIB were sold for a BO on a 3k listing, so 300 is a decent estimate.
I never knew they were going for so much on eBay these days. Looks like they normally get bid up to that point, so you could start the eBay auction at, say, $185 and let it go up from there. :)
Need a quick price check on a fairly dirty IBM 83-key XT keyboard. Seller claims it worked last summer but has no way of proving it. Prices are all over the place on eBay and are of no help.
Price check: DAS keyboard ultimate (no lettering), cherry blue, with media keys. Lightweight scratching but nothing unusual, buy a new one and two weeks later it's going to look like mine (shiny plastic, you can't avoid it).
Even if the scratches are "normal" in your opinion, they decrease the value a lot. They just don't look nice.
Can you give me a price, though?
Vortex black on black dye subs unused(can't find them for sale anywhere to get a pricing estimate)
IBM Model M- 122 with SDL cable in the UK. Mint apart from the yellowed spacebar.
IBM Model M- 122 with SDL cable in the UK. Mint apart from the yellowed spacebar.
I just bought a M-122 from fohat.digs for $40 shipped.
Since we are talking bucking springs - price check on my Unicomp "Spacesaver" model - black with black, blank keycaps. Caps are from Unicomp and it was ordered that way so no printed caps. Excellent condition. Love using it but it just sits due to noise!
Since we are talking bucking springs - price check on my Unicomp "Spacesaver" model - black with black, blank keycaps. Caps are from Unicomp and it was ordered that way so no printed caps. Excellent condition. Love using it but it just sits due to noise!
Anyone on this? I am guessing in the $50-ish range?
Since we are talking bucking springs - price check on my Unicomp "Spacesaver" model - black with black, blank keycaps. Caps are from Unicomp and it was ordered that way so no printed caps. Excellent condition. Love using it but it just sits due to noise!
Anyone on this? I am guessing in the $50-ish range?
I just sold mine for $50 shipped. Bought it at that price as well.
Ergodox in EU, MX Reds, Full hand acrylic case, PBT caps set?anyone?
I've got a Filco with white side-printed PBT caps. Is $170 + free shipping asking too much?
I've got a Filco with white side-printed PBT caps. Is $170 + free shipping asking too much?
I've got a Filco with white side-printed PBT caps. Is $170 + free shipping asking too much?
I've got a Filco with white side-printed PBT caps. Is $170 + free shipping asking too much?
Considering shipping to the US won't top $20, I'd think that $120-140 shipped would be the maximum, based on if the caps are thick or not.
imsto Cherry PBT price retail has been for long time about $75 blank set, $95 printed sets. Groupbuy price I give $55 blank and $75 printed, or maybe you saw cheaper price second hand.
imsto Cherry PBT price retail has been for long time about $75 blank set, $95 printed sets. Groupbuy price I give $55 blank and $75 printed, or maybe you saw cheaper price second hand.
Is there gonna be another gb for imsto thick pbt sets anytime soon? :^)
Is a full set of 1 day used QFR stock abs keycaps worth anything?
Is a full set of 1 day used QFR stock abs keycaps worth anything?
What is the value of a Drunken Skull CC in MX?
Nah, wasn't looking to sell for cash but to cross reference with other clack prices bc I'm trying to trade it for basically any topre clack with some exceptions (purples, greens). Thanks for the PC.What is the value of a Drunken Skull CC in MX?
Again, whatever someone will pay.
It cost apprx $25 new, but they're selling for 100 $ ish.
I will happily pay its retail value however.
imsto Cherry PBT price retail has been for long time about $75 blank set, $95 printed sets. Groupbuy price I give $55 blank and $75 printed, or maybe you saw cheaper price second hand.
Is there gonna be another gb for imsto thick pbt sets anytime soon? :^)
Is a full set of 1 day used QFR stock abs keycaps worth anything?
This active GB is for IMSTO thick PBT caps: http://geekhack.org/index.php?topic=50935.0
What is an apple aluminum keyboard worth?
What is an apple aluminum keyboard worth?
$20-35. Personally, I wouldn't pay more than $5 for one though since I despise them.
Can I get a price check on a Corsiar K90? Looks new and is very clean. If that names a difference.
Can I get a price check on a Corsiar K90? Looks new and is very clean. If that names a difference.
I'd put it at $100 shipped.
It costs quite a bit, true, but considering that it's not a popular board, it'd probably take a while to sell.
I might be able to get a CHERRY G80-3000 in black or white color, mx clear switch.
...
This board used to be ABS DS, then PBT dyesub, and the latest ones are thin PBT laser etched.
What's a fair price for such board?
Well when I open the account I'll put it up and see. Maybe someone can use it as a donor board.Can I get a price check on a Corsiar K90? Looks new and is very clean. If that names a difference.
I'd put it at $100 shipped.
It costs quite a bit, true, but considering that it's not a popular board, it'd probably take a while to sell.
Even less popular because all of the additional keys are domes.
EU Ergodox, MX Reds, Full hand acrylic case, PBT caps set?
EU Ergodox, MX Reds, Full hand acrylic case, PBT caps set?
EU Ergodox, MX Reds, Full hand acrylic case, PBT caps set?
I don't think we're allowed to bump old PC's
Price check: Rosewill keyboard, cherry red. Tenkeyless leopold, cherry brown, blank keys. White Unicomp spacesaver, USB.
Yep, I think I'm going to sell most of my mechanical keyboards.
EU Ergodox, MX Reds, Full hand acrylic case, PBT caps set?
I don't think we're allowed to bump old PC's
Lol what?
How much would y'all be willing to pay for this guy (the middle one)? I had a spare board lying around so I constructed a third. Open source software and hardware at https://github.com/wyager/MicroMechBoard (https://github.com/wyager/MicroMechBoard) ; completely reprogrammable.Show Image(http://i.imgur.com/ng3Ipih.jpg)
I don't have the patience to arrange all of these and I don't have a TKL keyboard handy at the moment so this picture can do.
Hardly used blank dark grey 87 keycap set from WASDkeyboards. They have mainly sat on keyboards I was not using.Show Image(http://i.imgur.com/K3VUenY.jpg)
What's a fair price for a Model F AT keyboard nowadays?
What's a fair price for a Model F AT keyboard nowadays?
I believe one just sold for around the tune of $60.
What's a fair price for a Model F AT keyboard nowadays?
Depends on the condition. Anywhere from $120-200.I believe one just sold for around the tune of $60.
That's and incredibly low price for an F AT. That's more in line with some of the ones that require a Soarer's mod to work.
That's really high, I've only seen them for around $60.
Perhaps they're different types.
That's really high, I've only seen them for around $60.
Perhaps they're different types.
Again, the F AT commands a price premium since it only needs a passive AT to PS/2 converter to be usable, has one of the better layouts, and is a ridiculously solid and awesome keyboard. The other Model Fs require some sort of active conversion like a Soarer's mod to be usable.
For reference, here are several PC ATs (Model F AT) that sold on ebay not too long ago:
http://www.ebay.com/itm/Vintage-IBM-PC-AT-PERSONAL-KEYBOARD-M-F-84-KEY-CLICKY-KEYBOARD-CLEAN-NICE-Model-/291015319873?pt=PCA_Mice_Trackballs&hash=item43c1dd6141
http://www.ebay.com/itm/Vintage-IBM-Model-PC-AT-Personal-Keyboard-M-F-84-Key-w-Box-Mechanical-Clicky-/271333436696?pt=PCA_Mice_Trackballs&hash=item3f2cbbad18
http://www.ebay.com/itm/Vintage-IBM-Model-F-PC-AT-Keyboard-6450200-Clicky-84-Keys-w-Passive-PS-2-Adapter-/370932498702?pt=PCA_Mice_Trackballs&hash=item565d4cc10e
There are several in that range on ebay right now and they typically sell in that range in here.
Sorry guys, I'll re post insteadLol what?
I bumped an old PC and got yelled at a month ago :'(
I got a german layout g81 with thick pbt dye sub keycaps for a couple of bucks on a yardsale. i've read a couple of times that they are very expensive and rare. but how much are they worth?
I got a german layout g81 with thick pbt dye sub keycaps for a couple of bucks on a yardsale. i've read a couple of times that they are very expensive and rare. but how much are they worth?
I got a german layout g81 with thick pbt dye sub keycaps for a couple of bucks on a yardsale. i've read a couple of times that they are very expensive and rare. but how much worth are they?The keyboard itself is most likely of little value since it's a G81 (MY switches). Half Saint on deskthority is selling the same keycaps for 60 euros here : http://deskthority.net/marketplace-f11/cherry-dye-sub-full-sets-de-yu-t6736.html
What's a fair price for a Model F AT keyboard nowadays?
Depends on the condition. Anywhere from $120-200.I believe one just sold for around the tune of $60.
That's and incredibly low price for an F AT. That's more in line with some of the ones that require a Soarer's mod to work.
That's really high, I've only seen them for around $60.
Perhaps they're different types.
Yes the XT Model F is going for around $60-80 currently. They do require a Soarer's converter to work on modern PCs.
The AT Model F is currently going for around $200, in excellent condition.
122-key Model F are going for around $185, in excellent condition.
How much is a set of those Tai Hao caps worth?
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
Ok fair enough, thanks for the info!!
Really I was just wondering if the $25 which seems to be the going rate now is realistic or profiteering.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
Ok fair enough, thanks for the info!!
Really I was just wondering if the $25 which seems to be the going rate now is realistic or profiteering.
Keypop pretty much allowed that GB to happen so I think they're entitled to a little bit of profiteering, however I do think $25 + shipping is a little steep.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
Ok fair enough, thanks for the info!!
Really I was just wondering if the $25 which seems to be the going rate now is realistic or profiteering.
Keypop pretty much allowed that GB to happen so I think they're entitled to a little bit of profiteering, however I do think $25 + shipping is a little steep.
I was more interested in forum members who are doing the same....:eek:
I mean people can sell for whatever they want it's just funny that is all.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
Ok fair enough, thanks for the info!!
Really I was just wondering if the $25 which seems to be the going rate now is realistic or profiteering.
How much is a set of those Tai Hao caps worth?
I sold for 15+shipping.
but originally they were like ~$9 plus shipping right?? Seems like all the pricing info was been removed from the GB thread....how convenient... :P
Yes, $9. But that did not include the 6.25 spacebar. So add $3 and a bit more for shipping if the set has that spacebar.
Ok fair enough, thanks for the info!!
Really I was just wondering if the $25 which seems to be the going rate now is realistic or profiteering.
Due to PayPal fees and such, I almost broke even at $15/each, but not quite. At $25/each they are probably making $5-10 depending on how much shipping they paid...
Still, $25 for a complete set of doubleshot keycaps? C'mon...you can't really complain about that. Where could you get a complete set of NEW doubleshots for $25 a year ago? We were paying $100 in group buys, then the bargain price of $60 direct to SP for a full set.
Still, $25 for a complete set of doubleshot keycaps? C'mon...you can't really complain about that. Where could you get a complete set of NEW doubleshots for $25 a year ago? We were paying $100 in group buys, then the bargain price of $60 direct to SP for a full set.
I was just trying to figure out how $9 turned into $25 but it all makes sense now....
Hi everyone! Was wondering what a fair value would be for a perfect condition, stock black Filco majestouch 2 ninja tkl case?
Trying to help out a fellow gh'er but honestly, I have no clue what a good price for the case would be.
Thanks in advance!
PC - Matias Quiet Pro PC version. Box, paperwork, everything. Zero shine. Used off and on a few weeks just to try the switches out. Like it, just don't love it and would like to free up some cash.
Cherry G80-1800 UK layout, winkeyless, MX blacks, used, good condition, PS2
maybe MX blues.. not sure
whats a reasonable buying price?
Does this thing worth anything?triple shot but not mx compatible=nice but not usefulShow Image(http://i.imgur.com/1HmA4pG.jpg)Show Image(http://i.imgur.com/hvXGt2e.jpg)Show Image(http://i.imgur.com/9rqfySy.jpg)
and the keycapsShow Image(http://i.imgur.com/3xF4R82.jpg)
Except that they're Topre compatible. In July some went for 35$ in an auction.
Except that they're Topre compatible. In July some went for 35$ in an auction.
Whoa if so then they're worth more
Except that they're Topre compatible. In July some went for 35$ in an auction.
Whoa if so then they're worth more
If they went for $35 in an auction, why would they be worth more?
nice but not useful
Is it worth buying a Cherry G80-11900 w/ black switches for $40 shipped?
Yeah it's used. But if that is an at-value price I'm probably not going to buy it.
Cherry G80-1800 UK layout, winkeyless, MX blacks, used, good condition, PS2
maybe MX blues.. not sure
whats a reasonable buying price?
ah. the one include aluminium tray that selling on ebay.
Original Skidata DE ISO keycap set
Anyone have an idea of what this (http://i.imgur.com/mxRcOWc.jpg) is worth? Perhaps a modder could remove the PCB and use that, or I could just sell the keycaps.
Just bought a new Zowie EC1 EVO CL . Its nice but I decided that I like the regular ec1 EVO better what should I ask for ?If it's still brand new then I wouldn't take much off, maybe Ł10. Depends on how much you used it etc. And what standard price is.
How much would 104 white pbt engraved keycaps go for?
How much would 104 white pbt engraved keycaps go for?
Thick like IMSTO or something from Banggood for example? That distinction will change the price quite a bit...
How much would 104 white pbt engraved keycaps go for?
Thick like IMSTO or something from Banggood for example? That distinction will change the price quite a bit...
Is this thick or regular? https://www.dropbox.com/s/5es0p3icvhxywjf/IMG_20131230_202102.jpg?m=
How much would 104 white pbt engraved keycaps go for?
Thick like IMSTO or something from Banggood for example? That distinction will change the price quite a bit...
Is this thick or regular? https://www.dropbox.com/s/5es0p3icvhxywjf/IMG_20131230_202102.jpg?m=
judging from the pic, its a regular pbt.
How much would 104 white pbt engraved keycaps go for?
Thick like IMSTO or something from Banggood for example? That distinction will change the price quite a bit...
Is this thick or regular? https://www.dropbox.com/s/5es0p3icvhxywjf/IMG_20131230_202102.jpg?m=
judging from the pic, its a regular pbt.
Ahh so how much would a set be worth?
If they're in perfect condition you could probably get the same $25 they would cost on Banggood if you include $5 flat-rate 2-day shipping. Whoever buys them would get them a hell of a lot faster than if they ordered on Banggood.
*snip*
*snip*
This is not the place for this. Please make 60 constructive posts and then post a WTB in classifieds.
What would a set of printed white and grey HHKB keys be worth? Great condition but the spacebar has some shine. Thanks.
What's an IBM 1394099 Model F 122 keys with attached RJ45 connector, date of birth 1999.09.08 UK, like new (if not new) in original box worth?
Friend of mine was given this and I was wondering how much it is worth? I tried to do some research on it but couldn't find anything.
(Attachment Link) (Attachment Link) (Attachment Link)
Friend of mine was given this and I was wondering how much it is worth? I tried to do some research on it but couldn't find anything.
(Attachment Link) (Attachment Link) (Attachment Link)
Is that space bar backwards??
I got some old doubleshot typewriter keys that are HELLA low profile, have some weird mods, and a 7x spacebar. Is it worth trying to sell here?
I got some old doubleshot typewriter keys that are HELLA low profile, have some weird mods, and a 7x spacebar. Is it worth trying to sell here?
Pictures would be nice.
Pictures would be nice.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.I'll give you $30+shipping for it. That should cover what you paid + shipping :))
http://imgur.com/xCo9o8O
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
STOP :blank:Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
I'll do $35
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Keys simply appear dirty not yellowed so I don't believe you need to go there. Some denture tablets are probably all you're going to need.Thank you for the tip! I'll give 'em a rinse tonight
I'll do $35
I'll do $35
Just so you know they have an ISO enter key and a 7x spacebar. Anyway, I'll keep it legal and make a thread for them after I clean them this week so we can talk about a purchase then.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
I'll do $35
Was I talking to you?
Was I talking to you?
Pacifist, there's a reason that people don't like trading or talking with you. $35? Lowball of the century, LOL.
OT: I'd say it's probably worth at least around a hundred. Don't let trolls like Pacifist try and lowball you out of a 'fair' sale. ('fair' because you're already selling at a great premium)
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.I'll give you $30+shipping for it. That should cover what you paid + shipping :))
http://imgur.com/xCo9o8O
Was I talking to you?Whoa there
Was I talking to you?Whoa there
I read these threads hells fast, tend to make mistakes.
Take a Ritalin and chill the **** out
Was I talking to you?Whoa there
I read these threads hells fast, tend to make mistakes.
Take a Ritalin and chill the **** out
I just don't see how you made that mistake. Even if you were reading fast, you would have noticed that I responded to a post that isn't yours.
Was I talking to you?
Pacifist, there's a reason that people don't like trading or talking with you. $35? Lowball of the century, LOL.
OT: I'd say it's probably worth at least around a hundred. Don't let trolls like Pacifist try and lowball you out of a 'fair' sale. ('fair' because you're already selling at a great premium)
Pacifist, there's a reason that people don't like trading or talking with you.People who live in glass houses shouldn't throw stones. Could you not tell that he was joking?
Pacifist, there's a reason that people don't like trading or talking with you.People who live in glass houses shouldn't throw stones. Could you not tell that he was joking?
Hello folks,
I'm thinking of selling my Filco TKL Brown Majestic Touch 2 keyboard, its in mint condition how much you guys think i can sell it for? Thanks
Hello folks,
I'm thinking of selling my Filco TKL Brown Majestic Touch 2 keyboard, its in mint condition how much you guys think i can sell it for? Thanks
if mint, 90-95% of what you paid for it
Was I talking to you?Whoa there
I read these threads hells fast, tend to make mistakes.
Take a Ritalin and chill the **** out
I just don't see how you made that mistake. Even if you were reading fast, you would have noticed that I responded to a post that isn't yours.Show Image(http://img.photobucket.com/albums/v121/dhampir/OJyrk_zps41f54efe.gif~original)
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
But CC sells these for ~$30 himself.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Exactly, I wasn't saying they aren't worth anything, I was saying I think it's kind of silly to assume their "worth" is more than what the vendor himself sells them for. I also would never spend more than retail plus shipping for one.
But you're more than willing to sell one for more?
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Exactly, I wasn't saying they aren't worth anything, I was saying I think it's kind of silly to assume their "worth" is more than what the vendor himself sells them for. I also would never spend more than retail plus shipping for one.
But you're more than willing to sell one for more?
When have I ever sold a clack?
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Then sell it for $30 + shipping and donate the additional $70 or so to CC. Don't sell for more based on that logic when you're not adding any value of your own and all the additional value comes from CC who sells it under the value you ascribed to it.
Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Then sell it for $30 + shipping and donate the additional $70 or so to CC. Don't sell for more based on that logic when you're not adding any value of your own and all the additional value comes from CC who sells it under the value you ascribed to it.
Sellers don't ascribe value; buyers do. Paying high prices for clacks is how buyers make it more likely that they can get one. People have less of a reason to sell them if they're cheap, which means less churn and fewer transactions. In an ironic twist, high prices make clacks more accessible, not less.
That's not to say that I agree with the market, of course. The obvious solution is to double or triple the number of Gnomes under ClickClack's employ.
MoreSellers don't ascribe value; buyers do. Paying high prices for clacks is how buyers make it more likely that they can get one. People have less of a reason to sell them if they're cheap, which means less churn and fewer transactions. In an ironic twist, high prices make clacks more accessible, not less.Anyone know how much my Green gumrot CC goes for these days? Got it in the last drawing but never really checked how much I could get for it.
http://imgur.com/xCo9o8O
Whatever you paid for it plus shipping, it's a god damn piece of plastic people.
Which someone took hours to work on, and if we value CC's time more than minimum wage and assume he spent three hours on a keycap, it would be worth over a hundred dollars for labor anyways.
Then sell it for $30 + shipping and donate the additional $70 or so to CC. Don't sell for more based on that logic when you're not adding any value of your own and all the additional value comes from CC who sells it under the value you ascribed to it.
That's not to say that I agree with the market, of course. The obvious solution is to double or triple the number of Gnomes under ClickClack's employ.
It only makes them more accessible because people who own them are like. "Sure, if you want to pay me double what this thing is worth, I will consider selling it."
Look, cut it out with the semantics. I personally don't encourage the overpriced clack trade, but I want to provide the guy with a decent answer to how much he could sell his clack for and how much people would buy it for. Worth is not material prices, as riotonthebay aptly stated, but on how much people want it. And people will definitely pay $100 for that particular clack.
Well you see here I posted in a "Price Check" thread. So i figured i'd get responses about the highest price that I could sell at. I'm not actually going to be selling it unless I need to to fund my education so I kinda just wanted an answer, not a argument about whether or not selling at a price higher than what I paid for it is "morally right". You see the worth is not at all tied to what I myself paid for it but what other people are willing to pay for it. That's how supply and demand works.Look, cut it out with the semantics. I personally don't encourage the overpriced clack trade, but I want to provide the guy with a decent answer to how much he could sell his clack for and how much people would buy it for. Worth is not material prices, as riotonthebay aptly stated, but on how much people want it. And people will definitely pay $100 for that particular clack.
U mad brah?
Well you see here I posted in a "Price Check" thread. So i figured i'd get responses about the highest price that I could sell at. I'm not actually going to be selling it unless I need to to fund my education so I kinda just wanted an answer, not a argument about whether or not selling at a price higher than what I paid for it is "morally right". You see the worth is not at all tied to what I myself paid for it but what other people are willing to pay for it. That's how supply and demand works.Look, cut it out with the semantics. I personally don't encourage the overpriced clack trade, but I want to provide the guy with a decent answer to how much he could sell his clack for and how much people would buy it for. Worth is not material prices, as riotonthebay aptly stated, but on how much people want it. And people will definitely pay $100 for that particular clack.
U mad brah?
Looking for a few theoretical PCs on Quick Fire Rapids.My QFR with blues sold for 45 before shipping, I would say an mx green could be ~85 shipped if you find the right person.
Barely used board with greens, gently used board with blues.
Gently used board modded to clears or ergo clears.
Looking for a few theoretical PCs on Quick Fire Rapids.
Barely used board with greens, gently used board with blues.
Gently used board modded to clears or ergo clears.
Look, cut it out with the semantics. I personally don't encourage the overpriced clack trade, but I want to provide the guy with a decent answer to how much he could sell his clack for and how much people would buy it for. Worth is not material prices, as riotonthebay aptly stated, but on how much people want it. And people will definitely pay $100 for that particular clack.
U mad brah?
Personally, I don't think US sets are worth any more than what you can buy brand new BSP set for... they are exactly the same except the home keys. For other language, it depend. DE set seem to be worth not as much since they are much more common... where as others that are very rare like FR, TS/US, YU could get a very high price ~$175+. US/RU I would put at $175 as 'fair market value'... but I would also not be surprised if you could get $250+ from some buyers.Those homekeys really are a deal breaker for me though. Nipples are so uncomfortable IMO, and I understand the premium price of the US sets since they're so rare (especially in mint/NIB condition).
Hi all,
just a quickie about four keyboards:
1) Used NCR / cherry blacks (Link (http://img20.allegroimg.pl/photos/oryginal/38/49/72/63/3849726317))
2) New, unused Cherry 2500 HAU [PL] (Link (http://geekhack.org/index.php?topic=48672.0))
3) New, unused, boxed Alcatel MFII [ES] (Link (http://img16.tablica.pl/images_tablicapl/104935345_1_644x461_klawiatura-alcatel-mfii-mechaniczna-ps-2-nowa-gdansk.jpg))
4) New, unused, boxed Acer 6312 [FR] (Link (http://img20.allegroimg.pl/photos/oryginal/38/62/54/22/3862542269_1))
Lol@ the thread of the Cherry 2500Hi all,
just a quickie about four keyboards:
1) Used NCR / cherry blacks (Link (http://img20.allegroimg.pl/photos/oryginal/38/49/72/63/3849726317))
2) New, unused Cherry 2500 HAU [PL] (Link (http://geekhack.org/index.php?topic=48672.0))
3) New, unused, boxed Alcatel MFII [ES] (Link (http://img16.tablica.pl/images_tablicapl/104935345_1_644x461_klawiatura-alcatel-mfii-mechaniczna-ps-2-nowa-gdansk.jpg))
4) New, unused, boxed Acer 6312 [FR] (Link (http://img20.allegroimg.pl/photos/oryginal/38/62/54/22/3862542269_1))
I don't know how much but damn that Acers got me hot and bothered.
Hi all,
just a quickie about four keyboards:
1) Used NCR / cherry blacks (Link (http://img20.allegroimg.pl/photos/oryginal/38/49/72/63/3849726317))
2) New, unused Cherry 2500 HAU [PL] (Link (http://geekhack.org/index.php?topic=48672.0))
3) New, unused, boxed Alcatel MFII [ES] (Link (http://img16.tablica.pl/images_tablicapl/104935345_1_644x461_klawiatura-alcatel-mfii-mechaniczna-ps-2-nowa-gdansk.jpg))
4) New, unused, boxed Acer 6312 [FR] (Link (http://img20.allegroimg.pl/photos/oryginal/38/62/54/22/3862542269_1))
Looking to sell off my computer minus hard drives.
CPU core i7 975
Mobo EVGA Classified 759
RAM 6GB Black Corsair Vengeance Triple Channel 1600Mhz
GPUs 2x OEM ATI 6970's in Crossfire.
PSU Corsair AX1200
CASE Coolermaster HAF XM
So what do you guys think a bolt-modded Model M part #1390120 with a new barrel plate is worth?
So what do you guys think a bolt-modded Model M part #1390120 with a new barrel plate is worth?
So what do you guys think a bolt-modded Model M part #1390120 with a new barrel plate is worth?
How much can I get out of my orangesicle topre skull clack?
I need realism please, so please don't tell me at 4grabs retail cost.
Thanks in advance,
T
How much can I get out of my orangesicle topre skull clack?
I need realism please, so please don't tell me at 4grabs retail cost.
Thanks in advance,
T
Please, don't ask for Clack prices in this thread. Look up recent sale prices in the Clack Info thread, instead.
I have a unused Coolermaster CM Storm Trigger Z, SGK-6010-GKCR1-US. I have the box, the USB Cord, the arm rest, and the Keys it came with. Some of the keys are a little bit faded from use (W A S D mostly). It has red switches, red LED backlight, with a red-anodized backplate, some minor scratches on the plate that you can only see when you pull the key caps off. The USB cord works fine most of the time, but sometimes you have to jiggle/re-plug it. I tried to get them to replace the USB cable. But they wont unless I send ENTIRE keyboard to Coolermaster on my dime, so instead I bought a Ducky Shine II (which is awesome). Anyway, what's it worth? Between someone harvesting it for parts, and/or using it?
-Reference Page- (http://www.coolermaster-usa.com/product.php?product_id=10097)
Reference Image;Show Image(http://www.coolermaster-usa.com/upload/product/10097/gallery/full/5.jpg?890386599)
Hey all,
Went for a walk with my girlfriend (begrudgingly) at a local flea market today. While walking by a computer booth absolutely piled with junk, I spotted a model m under a pile of keyboards three feet high.
I thought I'd try to pick it up for a few bucks as a backup to the M's I used daily.
Pulled it out and realized I was mistaken.
I found, at least what appears to be, a brand new IBM Model F AT keyboard in the original bag. The bag (sealed) and tape used match this one http://www.clickykeyboards.com/index.cfm/fa/items.main/parentcat/9934/subcatid/0/id/123624. No box of course, and no way to be certain it is new. I pulled the tape off carefully and it does appear completely brand new, no dirt, and perfect sticker. I only paid $5 Canadian. Waiting on an AT to PS/2 adaptor in order to give it a test.
Not NIB, but close.
Any idea on value? I'm guessing that, other than testing, I probably shouldn't use it and should put it back in the bag?
As an aside, any way to date these things? Serial number is 271054378 (on back).
Thanks,
G man
I have a unused Coolermaster CM Storm Trigger Z, SGK-6010-GKCR1-US. I have the box, the USB Cord, the arm rest, and the Keys it came with. Some of the keys are a little bit faded from use (W A S D mostly). It has red switches, red LED backlight, with a red-anodized backplate, some minor scratches on the plate that you can only see when you pull the key caps off. The USB cord works fine most of the time, but sometimes you have to jiggle/re-plug it. I tried to get them to replace the USB cable. But they wont unless I send ENTIRE keyboard to Coolermaster on my dime, so instead I bought a Ducky Shine II (which is awesome). Anyway, what's it worth? Between someone harvesting it for parts, and/or using it?
-Reference Page- (http://www.coolermaster-usa.com/product.php?product_id=10097)
Reference Image;Show Image(http://www.coolermaster-usa.com/upload/product/10097/gallery/full/5.jpg?890386599)
Just curious if the keyboard is unused how can the keys be faded from use??
I have a unused Coolermaster CM Storm Trigger Z, SGK-6010-GKCR1-US. I have the box, the USB Cord, the arm rest, and the Keys it came with. Some of the keys are a little bit faded from use (W A S D mostly). It has red switches, red LED backlight, with a red-anodized backplate, some minor scratches on the plate that you can only see when you pull the key caps off. The USB cord works fine most of the time, but sometimes you have to jiggle/re-plug it. I tried to get them to replace the USB cable. But they wont unless I send ENTIRE keyboard to Coolermaster on my dime, so instead I bought a Ducky Shine II (which is awesome). Anyway, what's it worth? Between someone harvesting it for parts, and/or using it?
-Reference Page- (http://www.coolermaster-usa.com/product.php?product_id=10097)
Reference Image;Show Image(http://www.coolermaster-usa.com/upload/product/10097/gallery/full/5.jpg?890386599)
Just curious if the keyboard is unused how can the keys be faded from use??
[...]Just curious if the keyboard is unused how can the keys be faded from use??
Lol, I caught that too.Good point, I meant that the keyboard is used, but I'm not using it right now. I used it for about 11 months, I type pretty softly... I bought it at the Coolermaster Booth during PDXLAN 21. They had a deal where you could try out any of their mechanical keyboards (& then buy it.). I took a pic of a ten keyless "CM Quick Fire Rapid" keyboard w/ red LEDs & Red MX switches on 2/16/2012 9:24 PM. (Because I'd never seen a mechanical keyboard before, and it wholly unusual to rubber dome based keyboards.)
Sounds like the board has been used. Do you happen to know if the issue with the USB cable is due to the cable or (more likely) the port? If it's an issue with the port, the price it could fetch would drop significantly.It's the cable, as mentioned in the previous post. (It detects reliably with my Ducky Mini USB cord, even if I pull on it in different directions.) Coolermaster wants me to send the entire keyboard to test the cable. I think that's crazy, and I dont want to pay the $12+ shipping when I could just buy a $12 micro usb cable from amazon or something.
He probably meant "currently being unused", as in it's no longer needed.:)) Exactly! I am not a good writer.. :blank:
Hey dudes and dudettes. I'm considering buying a Ducky Shine 3 full size with blue LEDs and blue switches. It's a few months old, comes with box and original accessories. Seller doesn't have a warranty card though. What's it worth?
Seller wants $115 plus shipping. I'll try to whittle the price down a bit. Thanks Linkbane!
Seller wants $115 plus shipping. I'll try to whittle the price down a bit. Thanks Linkbane!
:D
Not a problem. Warranty, although it's not huge, is still value lost if it's missing. Best of luck in your buys, join the Shine 3 club!
Seller wants $115 plus shipping. I'll try to whittle the price down a bit. Thanks Linkbane!
:D
Not a problem. Warranty, although it's not huge, is still value lost if it's missing. Best of luck in your buys, join the Shine 3 club!
Yea it looks like a nice board from the pictures and MX Blue switches are my favorite (although I haven't tried Topees, greens, clears, or whites yet). Which kind of board do you use?
price check on a lexmark M15?
Show Image(http://i.imgur.com/jj5U4WI.jpg)
Top row is MX and bottom is Topre & blue is Buckling.
How much are they each?
Please, don't ask for Clack prices in this thread. Look up recent sale prices in the Clack Info thread, instead.
Show Image(http://i.imgur.com/jj5U4WI.jpg)
Top row is MX and bottom is Topre & blue is Buckling.
How much are they each?Please, don't ask for Clack prices in this thread. Look up recent sale prices in the Clack Info thread, instead.
Can you that link?
Depending on the condition, $200-$250250$ how? he is not even first owner...
Depending on the condition, $200-$250250$ how? he is not even first owner...
Depending on the condition, $200-$250250$ how? he is not even first owner...
It has cherry DS. I'd price it closer to $200, $180 minimum.
What is a 30gb 3rd gen. Ipod worth? White/chrome. Many scratches on the back, but no dents (see picture). Front has micro scratches and a couple larger scratches on the left and right (see picture). Battery doesn't hold a charge (I already replaced the battery, but it still barely holds a charge more than about 20-30 min). Works great plugged into a sound dock or in a car with usb powered hookup.
(Attachment Link)
(Attachment Link)
A full-size Alps board with double shot keycaps?
Not a well-known brand.
Not mine. Looking at buying it.A full-size Alps board with double shot keycaps?
Not a well-known brand.
Pictures???
Not mine. Looking at buying it.A full-size Alps board with double shot keycaps?
Not a well-known brand.
Pictures???Show Image(http://ht
tp://i.imgur.com/70sy9lP.jpg)Show Image(http://i.imgur.com/26svgZh.jpg)
Not sure if the Russian legends are printed or double shot as well.
That's what I was thinking. Asked the seller for some pictures of the back of the keys with red on it. Otherwise I have some nice Alps caps soon. :DNot mine. Looking at buying it.A full-size Alps board with double shot keycaps?
Not a well-known brand.
Pictures???Show Image(http://ht
tp://i.imgur.com/70sy9lP.jpg)Show Image(http://i.imgur.com/26svgZh.jpg)
Not sure if the Russian legends are printed or double shot as well.
Not sure if they are an ALPS knock off but the keycaps are still double shot keycsps so I would say around $35 - $45
PC on:
GH 60 PCB
Poker II PCB
Maybe GB price+$10.PC on:
GH 60 PCB
Poker II PCB
GB price +$5
Iunno, $50?
PC on:
GH 60 PCB
Poker II PCB
GB price +$5
Iunno, $50?
Maybe GB price+$10.PC on:
GH 60 PCB
Poker II PCB
GB price +$5
Iunno, $50?
$50 sounds about right depending on buyer.
'Sprit's 60% pcb' aka the FaceW aka the 'FaceU's older brother', is the closest thing we can get to a gh60 besides the protos from china...they destroy the poker2 pcb in comparison :))
They are very high quality PCBs and have a ton of customization ability
'Sprit's 60% pcb' aka the FaceW aka the 'FaceU's older brother', is the closest thing we can get to a gh60 besides the protos from china...they destroy the poker2 pcb in comparison :))
They are very high quality PCBs and have a ton of customization ability
'Sprit's 60% pcb' aka the FaceW aka the 'FaceU's older brother', is the closest thing we can get to a gh60 besides the protos from china...they destroy the poker2 pcb in comparison :))Can I get a link to something about the face u, I can't find anything about it online. Just interested
They are very high quality PCBs and have a ton of customization ability
From what I gathered, Sprit's supports more layouts... what's the difference between Poker and Sprit's PCB?
Can I get a link to something about the face u, I can't find anything about it online. Just interested
Got an itch for GMK RGB mods. What should I be looking at paying?
If that's too much for me, what about IMSTO PBT RGB mods?
Got an itch for GMK RGB mods. What should I be looking at paying?
If that's too much for me, what about IMSTO PBT RGB mods?
PC:
Whats the price per MX Blue?
Got an itch for GMK RGB mods. What should I be looking at paying?
If that's too much for me, what about IMSTO PBT RGB mods?
EK has some RGB GMK mods at a reasonable price, the colors are less deep than the typical RGB though.
Price check on a 9/10 SSK with no broken rivets? Not entirely sure I want to let it go at this point because it's such a clean example but I've been off work sick lately so I think I'm going to need the money soon.
99% chance the Bulgarian legends are pad print. Tripleshots are extremely rare things.Turns out you were right (http://www.ebay.com/itm/171048654282). Still, I have some nice double-shots on the way. Thanks! :D
What is a Black Widow TE worth?Depends on condition, new ones are selling at $80 so I would say around 50.
What is a Black Widow TE worth?Depends on condition, new ones are selling at $80 so I would say around 50.
As stated new ones sell for $80 on razer store without shipping, the $50 I meant without shipping as well.What is a Black Widow TE worth?Depends on condition, new ones are selling at $80 so I would say around 50.
I think that's lowballing just a bit; if it's in good condition, $70 shipped seems reasonable.
As stated new ones sell for $80 on razer store without shipping, the $50 I meant without shipping as well.What is a Black Widow TE worth?Depends on condition, new ones are selling at $80 so I would say around 50.
I think that's lowballing just a bit; if it's in good condition, $70 shipped seems reasonable.
As stated new ones sell for $80 on razer store without shipping, the $50 I meant without shipping as well.What is a Black Widow TE worth?Depends on condition, new ones are selling at $80 so I would say around 50.
I think that's lowballing just a bit; if it's in good condition, $70 shipped seems reasonable.
Sounds reasonable in that case.
i have 100 mx blues 100 mx browns 100 mx reds and 100 mx blacks
how much would that be worth??
i have 100 mx blues 100 mx browns 100 mx reds and 100 mx blacks
how much would that be worth??
Used or new? Plate or PCB mount?
All together or priced separately?
Is say $0.50 or less per switch.
i have 100 mx blues 100 mx browns 100 mx reds and 100 mx blacks
how much would that be worth??
Used or new? Plate or PCB mount?
All together or priced separately?
Is say $0.50 or less per switch.
new
pcb mounted
the thing is could u not just cut off the pins to make them plates mounted?
Much sorry i'm a newbie.
Just curious, how much does a new or in like-new condition WoB Cherry DS set from a g81-1800 go for now-a-days? I don't gave one, but want to know what to offer for one if needed.
Just curious, how much does a new or in like-new condition WoB Cherry DS set from a g81-1800 go for now-a-days? I don't gave one, but want to know what to offer for one if needed.
Do you have pictures
I think Ivan sold a set for $60 in his sale.
what would be the price of a used KeyCool 84 or 87 white body's mx brown switches? in good condition comes with box and everything it came with in box ?
If it's $.60 for a new switch, I'd do $.70 for vintage ones.Whiskytango sold many more than 1000 vintage blacks for $0.25 each.. Maybe pay a bit more than that, but i think anything more than 0.40$ per switch is overpriced. Vintage blacks are EXTREMELY common.
I think 110 will run you about $75-80.
If it's $.60 for a new switch, I'd do $.70 for vintage ones.Really? I thought vintage blacks were pretty cheap... :-X
I think 110 will run you about $75-80.
If it's $.60 for a new switch, I'd do $.70 for vintage ones.Really? I thought vintage blacks were pretty cheap... :-X
I think 110 will run you about $75-80.
I sell vintage blacks at used price... I only mention it as a selling point to get rid of them sooner. $.30-40/ea is a fair price in my opinion. It's not like they are hard to find at all. Can find them on loads of old terminal boards if want plate mount, or easy to find on G80 for PCB.Yeah, I decided I am just going to try to get an old WYSE and take the blacks off of them, get a moogle set and put the keycaps on my poker or filco.
What does a SSK go for? I'm looking to buy one for my first BS keyboard but I'm not sure what is is a good price.
I will of course be buying this later. I need to have time with my HHKB I'm ordering on Tuesday of course.
What does a SSK go for? I'm looking to buy one for my first BS keyboard but I'm not sure what is is a good price.
I will of course be buying this later. I need to have time with my HHKB I'm ordering on Tuesday of course.
Price Check: Originative Dolch 87 keyset
Price Check: Originative Dolch 87 keyset
Price Check: Originative Dolch 87 keyset
Thanks guys.
Now I just need to determine whether or not I want to keep dolch or hyperfuse. Hyperfuse is pretty damn awesome.
Need.. moar.. keyboards?
Just want to confirmHow it usually goes is, pay by gift and you don't have a fee, or if you want to pay as good, include the paypal fee. So lets say you could send 40 as gift (what they are asking), or you could sent 41.50 as goods.
If a buyer wants to pay via an invoice, they usually pay for the fee, right?
And if they want to pay via gift, they don't pay any fee, right?
So if a seller sends an invoice with the fee, they get the same amount of money as if the buyer paid via gift.
Just want to confirmHow it usually goes is, pay by gift and you don't have a fee, or if you want to pay as good, include the paypal fee. So lets say you could send 40 as gift (what they are asking), or you could sent 41.50 as goods.
If a buyer wants to pay via an invoice, they usually pay for the fee, right?
And if they want to pay via gift, they don't pay any fee, right?
So if a seller sends an invoice with the fee, they get the same amount of money as if the buyer paid via gift.
Although if they aren't asking for you to cover the paypal fees, you might need to ask them and see what they want you to do.Just want to confirmHow it usually goes is, pay by gift and you don't have a fee, or if you want to pay as good, include the paypal fee. So lets say you could send 40 as gift (what they are asking), or you could sent 41.50 as goods.
If a buyer wants to pay via an invoice, they usually pay for the fee, right?
And if they want to pay via gift, they don't pay any fee, right?
So if a seller sends an invoice with the fee, they get the same amount of money as if the buyer paid via gift.
Thanks!
ErgoDox
I want to buy an already built ergodox with everything i need.(including caps)
Anyone have an idea how much this will run me?
Price check on 3D CC skull topre and H.O. CC skull topre. Thanks!
I was thinking $75 but wanted to get the prof. opinions
What kind of PBT keycaps?
I would like to get price check on Ibm Model M 21jun88 1401, mint condition.Show Image(http://i107.photobucket.com/albums/m281/downlinx/modelmback_zps72e88fc0.jpeg)Show Image(http://i107.photobucket.com/albums/m281/downlinx/IMG_20140127_150247_zpsifd0ikqt.jpg)
I was thinking $75 but wanted to get the prof. opinions
How much would a WYSE keycap set run you for right now?There are so many different wyse keysets.. Could you be more specific?
I'm not quite sure what Wyse keyset they are for sure but here is a picture of the one I'm talking about from Sth's poker 2.How much would a WYSE keycap set run you for right now?There are so many different wyse keysets.. Could you be more specific?
How much would a WYSE keycap set run you for right now?
119 MX Brown switches (PCB-mounted)?
I just desoldered them off a NIB G80.
Its a good deal if you ask me.119 MX Brown switches (PCB-mounted)?
I just desoldered them off a NIB G80.
Anyone know? MechanicalKeyboards is selling 110-pack for $53 shipped. I have 115 listed for $40 shipped. Is that reasonable?
Its a good deal if you ask me.119 MX Brown switches (PCB-mounted)?
I just desoldered them off a NIB G80.
Anyone know? MechanicalKeyboards is selling 110-pack for $53 shipped. I have 115 listed for $40 shipped. Is that reasonable?
119 MX Brown switches (PCB-mounted)?
I just desoldered them off a NIB G80.
Anyone know? MechanicalKeyboards is selling 110-pack for $53 shipped. I have 115 listed for $40 shipped. Is that reasonable?
119 MX Brown switches (PCB-mounted)?
I just desoldered them off a NIB G80.
Anyone know? MechanicalKeyboards is selling 110-pack for $53 shipped. I have 115 listed for $40 shipped. Is that reasonable?
My rule of thumb is $0.25 a switch or less if you want it to sell quickly. $40 shipped isn't unreasonable though since it's roughly $0.35 a switch, not a bad price for practically new switches.
Of course, they are Browns which get a lot of hate, so it may have to go lower.
Question: How much is it worth for a 1 month old Poker II with Clear MX Switches mod?
Question: How much is it worth for a 1 month old Poker II with Clear MX Switches mod?
Does it have any issues?
Question: How much is it worth for a 1 month old Poker II with Clear MX Switches mod?
Does it have any issues?
Zero issue. No scratches. Perfect condition
Anyone got an estimate on the value of a FILCO red case Majestouch? 10 keyless, or full sized keyboard?jcrouse sold his red cased tkl for $200 in his sale.
Looking to try and find one from some one, somewhere, somehow - but I need to know what I should be offering first so I know I'm not getting ripped off to high heavens.
I think thats a bad price considering you can order it directly from Japan for cheaper: http://www.diatec.co.jp/shop/index.phpAnyone got an estimate on the value of a FILCO red case Majestouch? 10 keyless, or full sized keyboard?jcrouse sold his red cased tkl for $200 in his sale.
Looking to try and find one from some one, somewhere, somehow - but I need to know what I should be offering first so I know I'm not getting ripped off to high heavens.
Question: How much is it worth for a 1 month old Poker II with Clear MX Switches mod?
Does it have any issues?
Zero issue. No scratches. Perfect condition
Is it the board from this thread? -> http://geekhack.org/index.php?topic=53905.0
Thick, Textured, Not yellowed, Pristine (Or close to it) Moogle included.How much would a WYSE keycap set run you for right now?
Thick? Thin? Shiny? Tons of texture? Yellowed? Pristine? Needs Moogle? Includes Moogle?
In other words, more info is needed.
Question: How much is it worth for a 1 month old Poker II with Clear MX Switches mod?
Does it have any issues?
Zero issue. No scratches. Perfect condition
Is it the board from this thread? -> http://geekhack.org/index.php?topic=53905.0
Nope, that one is my gf's.
« Last Edit: Wed, 05 February 2014, 04:57:46 by joneslee85 »
I received a bunch of these, so I'm wondering how much they're worth.
PCB mounted stabilizer set with 5 pairs of mounts, 4 2x wires, 6.25x wire, and 7x wire.Show Image(http://img.tapatalk.com/d/14/02/16/egysypab.jpg)
PC on AT Model M?
PC on AT Model M?
The last one good condition one I remember went quickly for $135 in classifieds.
PC on AT Model M?
How much does an Cherry G80 3700 keypad go for? In good condition.
NIB Filco MJ2 Black/black. Not used just tested.
Oops! 87 key.
Whats the price for a used CMStorm QuickFire Rapid TKL w/ Cherry MX blues and a couple shiny keys? Also, a KBT Pure Pro, used roughly 1-2 months with no signs of wear?
I have an original Happy Hacking Keyboard Professional, model PD-KB300BN.
What's it worth? :blank:
I have an original Happy Hacking Keyboard Professional, model PD-KB300BN.
What's it worth? :blank:
Depending on condition, I'd say it should bring $150-180.
HHKB Type S 55g with blanks. Very good condition. Price? :-\
PC: Original Cherry grey/beige doubleshots for a numpad.
Price check on;
Stock Filco MJ2 TKL WoB keycaps
Stock Razer BWUE 2013 keycaps
Filco Black on Red WASD cluster
Filco Black on Blue WASD cluster
White/Grey-ish on Red WASD cluster
Doubt anyone in the world would want any of these, though... Or can they be useful somehow, experimenting with them or something? :p
HHKB Type S 55g with blanks. Very good condition. Price? :-\Lowest retail - $10, but some topre experts may have a better answer
HHKB Type S 55g with blanks. Very good condition. Price? :-\Lowest retail - $10, but some topre experts may have a better answer
I would think the 55g domes would add to the value.
HHKB Type S 55g with blanks. Very good condition. Price? :-\Lowest retail - $10, but some topre experts may have a better answer
I would think the 55g domes would add to the value.
Does it not come standard 55g?
HHKB Type S 55g with blanks. Very good condition. Price? :-\Lowest retail - $10, but some topre experts may have a better answer
I would think the 55g domes would add to the value.
Does it not come standard 55g?
No, standard HHKB Pro either regular or Type S is 45g.
I sold mine for $100 a while ago. Of course, might be more now that they're rarer.
What would be reasonable pricing for these items? I've accumulated too much and need to part ways with some of my stuff, and I don't want to list things too high or too low. I want it to be a good deal for both parties involved.
- Filco Majestouch 2 - Beige - MX Reds $135 shipped
- Filco Majestouch 2 - TKL - Beige - MX Reds $125 shipped
- Ducky DK 9087 Shine 2 - TKL - MX Reds - White LEDs (for reference, it's this one: http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166 (http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166))
- Originative GMK Classic Beige/Black keycap set $90 shipped
- Originative GMK Classic Beige/Blue (Olivetti) keycap set $90 shipped
- Ducky Blank White PBT Otaku keycap set
Everything is in perfect condition and barely used.
Thanks in advance!
What would be reasonable pricing for these items? I've accumulated too much and need to part ways with some of my stuff, and I don't want to list things too high or too low. I want it to be a good deal for both parties involved.
- Filco Majestouch 2 - Beige - MX Reds
- Filco Majestouch 2 - TKL - Beige - MX Reds
- Ducky DK 9087 Shine 2 - TKL - MX Reds - White LEDs (for reference, it's this one: http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166 (http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166))
- Originative GMK Classic Beige/Black keycap set
- Originative GMK Classic Beige/Blue (Olivetti) keycap set
- Ducky Blank White PBT Otaku keycap set
Everything is in perfect condition and barely used.
Thanks in advance!
What would be reasonable pricing for these items? I've accumulated too much and need to part ways with some of my stuff, and I don't want to list things too high or too low. I want it to be a good deal for both parties involved.Everything is in perfect condition and barely used.
- Filco Majestouch 2 - Beige - MX Reds
- Filco Majestouch 2 - TKL - Beige - MX Reds
- Ducky DK 9087 Shine 2 - TKL - MX Reds - White LEDs (for reference, it's this one: http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166 (http://www.mechanicalkeyboards.com/shop/index.php?l=product_detail&p=166))
- Originative GMK Classic Beige/Black keycap set
- Originative GMK Classic Beige/Blue (Olivetti) keycap set
- Ducky Blank White PBT Otaku keycap set
Thanks in advance!
Is beige the white model? That's probably $140 shipped for the big one, and $130 for the small one. They're hard to find as of late
Ducky, probably $125 shipped, maybe $130, if it's in really good condition
$90 is really cheap for GMK imo, I'd say $100 shipped
Is the ducky set thick or thin? Thick, $60 shipped, thin, $25.
Hey guys, looking for a price check on a few things:
1- KBtalKing Pro w/ Cherry Reds
2- BNIB Model M 1391401
3- A virtually new (used for 10 minutes) Siig Minitouch w/White Alps
4- A nonfunctional Filco Majestouch v1 with MX Blues
5- A full set of Cherry Profile Lasered keycaps (white on black)
2. Too highHey guys, looking for a price check on a few things:
1- KBtalKing Pro w/ Cherry Reds
2- BNIB Model M 1391401
3- A virtually new (used for 10 minutes) Siig Minitouch w/White Alps
4- A nonfunctional Filco Majestouch v1 with MX Blues
5- A full set of Cherry Profile Lasered keycaps (white on black)
1. No idea
2. $110 shipped (prolly high)
3. no idea
4. If you desolder all the switches, you can sell them for ~$60
5. $45 I think
Yeah.. All too high TacticalStache..
Yeah.. All too high TacticalStache..
Hey guys, looking for a price check on a few things:
1- KBtalKing Pro w/ Cherry Reds
2- BNIB Model M 1391401
3- A virtually new (used for 10 minutes) Siig Minitouch w/White Alps
4- A nonfunctional Filco Majestouch v1 with MX Blues
5- A full set of Cherry Profile Lasered keycaps (white on black)
Hey guys, looking for a price check on a few things:
1- KBtalKing Pro w/ Cherry Reds
2- BNIB Model M 1391401
3- A virtually new (used for 10 minutes) Siig Minitouch w/White Alps
4- A nonfunctional Filco Majestouch v1 with MX Blues
5- A full set of Cherry Profile Lasered keycaps (white on black)
PC on 100% new WoB Cherry DS?
PC on 100% new WoB Cherry DS?
From which keyboard? Does it have standard ANSI bottom row mods?
PC;
1.) Stock Poker 2 thick PBT keycaps.
2.) Poker 2 blank thick PBT RBG.
PC;
1.) Stock Poker 2 thick PBT keycaps.
2.) Poker 2 blank thick PBT RBG.
Is that the keyset or a keyboard?
How much could I get for the grey/black Realforce 87U, variable weighted? Used only a couple weeks and still includes original accessories, wrapping, and box.
PC on 87 used MX blue switches from a QFR
PC on a QFR modded to clears (less than 2 weeks use on caps)How much could I get for the grey/black Realforce 87U, variable weighted? Used only a couple weeks and still includes original accessories, wrapping, and box.
Probably what you paid less $10 or $15
PC on 87 used MX blue switches from a QFR
PC on a QFR modded to clears (less than 2 weeks use on caps)
PC on 87 used MX blue switches from a QFR
PC on a QFR modded to clears (less than 2 weeks use on caps)
$25-35 + shipping on the Blues. You can get 100 brand spanking new from mk.com for $50 shipped and often can find them for less. Depending on the switch $0.25-0.35 per switch for the four common ones is a generally fair price. I always recommend $0.25 per switch if you want them to sell.
For the QFR, base price is typically $50-60 for any used one since you can frequently find one brand new in that range. Since Clears are slightly less common, I'd say the $70-80 price is fair. You might be able to get more out of it, but don't expect it since it's not lubed, Ergo Clears, or stickered.
Blues and a Clear board would net you more than just a proper ergo Clear board. By proper, I mean 62-67g springs.and Krytox and.maybe stickers, not an unlubed one that you slap Blue springs in.
Blues and a Clear board would net you more than just a proper ergo Clear board. By proper, I mean 62-67g springs.and Krytox and.maybe stickers, not an unlubed one that you slap Blue springs in.
Wouldn't 62-67g springs be heavier than the standard spring in clears, not lighter which is the point of that mod?
What would a Filco Majestouch v2 Ninja Mx Blacks be worth? Was mildly used for a couple of months, no visible gloss.
I meant the full keyboard...not the switches lol, my bad.
Blues and a Clear board would net you more than just a proper ergo Clear board. By proper, I mean 62-67g springs.and Krytox and.maybe stickers, not an unlubed one that you slap Blue springs in.
Wouldn't 62-67g springs be heavier than the standard spring in clears, not lighter which is the point of that mod?
korean spring is measured at bottom vs cherry at actuation
http://www.ebay.co.uk/itm/Access-IS-Point-of-sale-Keyboard-P-N-AKEOCTI294-2-cleaned-tested-VG-condition-/301101350597?ssPageName=ADME:X:RTQ:GB:1123
Used Access-IS POS keyboards, 15x6 matrix, as shown in the ebay listing.
Also any information is appreciated. I am getting them for a project but not sure if they're even Cherry MX to begin with. Am guessing I will need to wire up to a teensy but don't know how.
PC:
F-122
http://www.ebay.co.uk/itm/Access-IS-Point-of-sale-Keyboard-P-N-AKEOCTI294-2-cleaned-tested-VG-condition-/301101350597?ssPageName=ADME:X:RTQ:GB:1123
Used Access-IS POS keyboards, 15x6 matrix, as shown in the ebay listing.
Also any information is appreciated. I am getting them for a project but not sure if they're even Cherry MX to begin with. Am guessing I will need to wire up to a teensy but don't know how.
How much! I'm sure I bought one of those not that long ago for Ł5 - I'll try to find the listing... They are MX though
Actually not quite the same but similar
http://www.ebay.co.uk/itm/ibm-sure-pos-keyboard-/111220875499
GK
How much is a Das model S ultimate worth? I've had it for about a year, and kept it great condition.
About 100 vintage black switches?
About 100 vintage black switches?
http://www.ebay.co.uk/itm/Access-IS-Point-of-sale-Keyboard-P-N-AKEOCTI294-2-cleaned-tested-VG-condition-/301101350597?ssPageName=ADME:X:RTQ:GB:1123
Used Access-IS POS keyboards, 15x6 matrix, as shown in the ebay listing.
Also any information is appreciated. I am getting them for a project but not sure if they're even Cherry MX to begin with. Am guessing I will need to wire up to a teensy but don't know how.
How much! I'm sure I bought one of those not that long ago for Ł5 - I'll try to find the listing... They are MX though
Actually not quite the same but similar
http://www.ebay.co.uk/itm/ibm-sure-pos-keyboard-/111220875499
GK
omg! Five pounds! what keywords did you use?
Any full sets?
Hey guys,
Just got 2 grab/crap bags from Signature Plastics in today. First time I've ever bought them before, so I figured I might as well grab 2 just to be safe you know? Well...pretty unwhelming, was hoping for more novelty keys. Was wondering if it's worth it to sell the rest or even trade them? Would prefer to trade for some novelty keys.MoreShow Image(http://i.imgur.com/QvnUARe.jpg)
Ok guys.. help needed!
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
Ok guys.. help needed!
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
Ok guys.. help needed!Probably $500-600
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
Ok guys.. help needed!
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
This thread is for price checks on items that have an objective value. Unless you're looking for the retail prices of these, the Clack Info Thread (http://geekhack.org/index.php?topic=39794.0) would be a better place to put this.
Ok guys.. help needed!
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
That is an Iron Man made by the Girlfriend of a Member of the Korean Forums.Ok guys.. help needed!
How much do these go for thesedays?
I have been away from GH for quite a while.. so can someone give me an update on the market price?
Thanks very much!
Whoa whats that on the far left?
pc on M 1390120
pc on M 1390120
Condition? Label? Everything included (SDL cable, all caps and cap covers present)? Rivets popped or all present? You really need to state the condition for a price to be given since there can be huge price differences on different condition boards.
Since you'd have to buy an SDL cable, it's missing a cap, and unknown whether it works and the internal condition, it's a $45-50 board. Someone more in the know may disagree with me, but that's the range I've seen for boards in that condition on eBay and I've seen known working boards go for $60-75 on here recently.
I am wondering how much my original DS cherry keycaps are worth.
They were basically pulled new from a MY3100 that I took out of storage.
I Believe everything is standard besides the caps lock and bottem row, is there anywhere to buy remakes of those but in modern standard style?
(Attachment Link)
(Attachment Link)
I am wondering how much my original DS cherry keycaps are worth.$75
They were basically pulled new from a MY3100 that I took out of storage.
I Believe everything is standard besides the caps lock and bottem row, is there anywhere to buy remakes of those but in modern standard style?
(Attachment Link)
(Attachment Link)
Price check:If you want to sell it id say 120$ for the console, $30 for the 2 controllers ($15 each) and $40 of games because theyre all pretty old now, L4D2 was given away free on Steam for a while.
Used Xbox 360 slim matte black with 100gb hard drive in good codition
Comes with 2 controllers: One wired and one wireless both in very used condition
Turtle Beach x31 wireless headset
Every cord ever needed for Xbox 360 plus tons others that's comes with it
Games that come with it:
Guitar Hero III Legends Of Rock
Call of duty: World at war
Fallout new vegas
Left 4 dead 2
Skyrim
Bioshock 1 and 2
Battlefield Bad company 2
Elder scrolls Oblivion
Fable 3
Red dead redemption
Assassin's creed 1 and 2
GTA 4
Call of duty 4
All in good condition
I am wondering how much my original DS cherry keycaps are worth.
They were basically pulled new from a MY3100 that I took out of storage.
I Believe everything is standard besides the caps lock and bottem row, is there anywhere to buy remakes of those but in modern standard style?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
You can get a beige moogle. The color matches it very close. I got a set like this last year and I bought a moogle as well. They matches well. These moogles pop up from time to time in the classifieds.
(Attachment Link)$75
(Attachment Link)
I haven't decided to sell it but I have a Realforce 87u lightly used in great shape had it about half a year. It has new yellow keycaps from elitekeyboards that are only a few months old.
anyone have a ballpark estimate at what I could sell this for ?
I haven't decided to sell it but I have a Realforce 87u lightly used in great shape had it about half a year. It has new yellow keycaps from elitekeyboards that are only a few months old.
anyone have a ballpark estimate at what I could sell this for ?
Probably around $160 or thereabouts.
$50 at most? It seems to be in rough condition and whoever buys it needs to have extra blue switches sitting around as well as a soldering iron.
If I were you I would probably fix it first if you could.
So I'm aware there are different types of Model Ms that go for various amounts of money. I'm not sure how to identify the different types but the part # on the back of mine is 1391401.
Could anyone tell me how much I could sell it for?
So I'm aware there are different types of Model Ms that go for various amounts of money. I'm not sure how to identify the different types but the part # on the back of mine is 1391401.
Could anyone tell me how much I could sell it for?
What are my PBT 105 ISo Keycaps worth?Not too much since they're lasered. I'd say maybe 10-20 quid tops.
http://i.imgur.com/fm4BJJm.jpg (http://i.imgur.com/fm4BJJm.jpg)
What are my PBT 105 ISo Keycaps worth?Not too much since they're lasered. I'd say maybe 10-20 quid tops.
http://i.imgur.com/fm4BJJm.jpg (http://i.imgur.com/fm4BJJm.jpg)
Realforce 104 Pro 10th anniversary edition -- just the keyboard with no keycaps. How much would the remaining keyboard, the PCB, case, domes, springs, etc. go for altogether?
Realforce 104 Pro 10th anniversary edition -- just the keyboard with no keycaps. How much would the remaining keyboard, the PCB, case, domes, springs, etc. go for altogether?
Is that 30g uniform?
For reference, I sold entire Alps cap sets from Apple keyboards and some others for between $5 and $15. Just the mods would go for less, especially since Alps boards tend to be more eclectic. I'd say a max of $5, probably less. That's just me though.Fair enough. Thanks. :)
If it were thicker Alps like you see on the old Toshiba laptops or if they were more unusual and interesting, they could go for more, but I they're not. I also seem to remember that those Bulgarian Alps boards were fairly cheap on eBay to begin with.
Realforce 104 Pro 10th anniversary edition -- just the keyboard with no keycaps. How much would the remaining keyboard, the PCB, case, domes, springs, etc. go for altogether?
Looking for a price check It is going to be an AEK II with what I believe to be cream alps.I.e. you’re going to spend a bunch of time working on the board just to sell it? I doubt the price will be worth the time/work you put into it. But maybe it’s just fun to do. :-)
Looking for a price check It is going to be an AEK II with what I believe to be cream alps.I.e. you’re going to spend a bunch of time working on the board just to sell it? I doubt the price will be worth the time/work you put into it. But maybe it’s just fun to do. :-)
I have an ANSI 1.50 aluminum black anodized plate. any ideas on a good price for it?
I have an ANSI 1.50 aluminum black anodized plate. any ideas on a good price for it?
One from imsto? Used or brand new? He sold them in GB for 25$ so that would be a good price. If it's brand new you can add a bit for the shipping costs to you.
I'm not sure if it's from imsto. It came with a phantom kit I purchased from a forum member.
I'm looking for a 1.25 plate so I was thinking of selling this one. Thank you for the info.
I'm not sure if it's from imsto. It came with a phantom kit I purchased from a forum member.
I'm looking for a 1.25 plate so I was thinking of selling this one. Thank you for the info.
Oh a TKL one. Hmm. Maybe you can do a straight trade?
PC for an AT101W
PC for an AT101W
condition????
PC for an AT101W
condition? ???
Not entirely certain -- it's something I'm looking at locally on kijiji. From the picture, it looks dusty and perhaps a bit yellowed, but it apparently still works and all that good stuff.
$10-$15 top for used ones
the blacks on those don't age well
Hi,
IBM 42H1292 with attached cord, USA, 1/30/96.
Worth cleaning up to sell?
$10-$15 top for used ones
the blacks on those don't age well
Ah. So it's not really a good deal then.
In people's opinion, would it be worth getting the board for $15, or is it too likely to be disappointing? I can provide a link to the kijiji posting if you all like.
Is 100 bucks a good price for an IBM Model F 122-key keyboard?Yes, so long as the condition isn't too terrible (no massive scratches on the front, etc.)
Is 100 bucks a good price for an IBM Model F 122-key keyboard?Yes, so long as the condition isn't too terrible (no massive scratches on the front, etc.)
Is 100 bucks a good price for an IBM Model F 122-key keyboard?
PC on shiny BoW cherry DS in 1800 layout?
Hello everyone
I posted here about a week ago and did not attach a photo so I thought I'd try it again
I have an ANSI 1.50 aluminum black anodized plate. any ideas on a far price for it?
Here are the photos
http://imgur.com/a/yVTi8
Thanks for any help
Zac
Quickfire TK w/browns lightly used?
I figured it had just got skipped over since it was getting buried.Quickfire TK w/browns lightly used?
please don't bump your post after 3.5 hours
but the PC should be new price-~$10-$20
Also we should get a FAQ for this thread
Also we should get a FAQ for this thread
The problem is that prices fluctuate, so keeping it updated would require a lot of maintenance.
PC: ~1 week of use - Realforce 88u 45g uniform Swe/Fin layout. I think it can only be found at keyboardco.com - for 160 GPB, correct me if I'm wrong.I think you quite right :)
PC: ~1 week of use - Realforce 88u 45g uniform Swe/Fin layout. I think it can only be found at keyboardco.com - for 160 GPB, correct me if I'm wrong.
Hey guys, got my hands on a Apple Extended Keyboard (orange Alps, model M0115) in what I would say is pretty great condition - http://imgur.com/a/iU3Fv . I've fully cleaned it since and everything seems to be working. I was thinking of selling this as a package with a 6ft (black, not original) ADB cable and a Griffin iMate, however I'm not sure what I should be looking for. What do you guys think?
IBM Model F 5291? It's this one (picture by DavidB):Show Image(http://i1313.photobucket.com/albums/t557/dbo35/DSC_0331_zps69d58058.jpg)
IBM Model F 5291? It's this one (picture by DavidB):Show Image(http://i1313.photobucket.com/albums/t557/dbo35/DSC_0331_zps69d58058.jpg)
IBM Model F 5291? It's this one (picture by DavidB):Show Image(http://i1313.photobucket.com/albums/t557/dbo35/DSC_0331_zps69d58058.jpg)
~$20-25 plus shipping (game box is $16?)
IBM Model F 5291? It's this one (picture by DavidB):Show Image(http://i1313.photobucket.com/albums/t557/dbo35/DSC_0331_zps69d58058.jpg)
~$20-25 plus shipping (game box is $16?)
Its really low because the connector currently cannot be converted to USB right?
How much should I pay for a dirty Model F? Not much permanent physical abuse, don't have a pic, sorry.
Im trying to find a selling price for my poker 2 stickered and lubed with mx blacks
Im trying to find a selling price for my poker 2 stickered and lubed with mx blacks
Im trying to find a selling price for my poker 2 stickered and lubed with mx blacks
Does it come with all the accessories the original does or is it just the keyboard, caps, and case?
If it's just the keyboard, somewhere between $70-85 is a fair price. With the accessories, you might be able to get $90-95, $100 shipped if you're lucky. They go for $110-120 new with all the accessories and 20% off the new price for something used is a good general baseline, at least with super common stuff like a Poker II.
On the note of lube and stickers. As cool as they are, don't expect them to add anything more than $5 to the price. Customization really doesn't factor into price much since customization is a personal thing.
Price check: White Realforce 87u 55g w/ White/Grey keycaps. Great condition, no idea of age.
Can i get a price check on a new 87 retro set please?
http://imageshack.com/a/img856/1989/ppcj.jpg
Can someone tell me what is a good price for a set of RGBY Niqmod modifiers?
PCB mount vintage browns?
ThnxPCB mount vintage browns?
Browns are very common, so 0.25-0.35$ per switch I'd say.
Hello,
What's the value for OG skidata caps off a skidata board?
Thanks :)
Hello,
What's the value for OG skidata caps off a skidata board?
Thanks :)
Merged your question into the ongoing price check thread.
To address your question, there are quite a few available on ebay but the shipping is a tad expensive, I would guess $75 for the set, at the most.
http://www.ebay.com/itm/Skidata-Ps-2-Keyboard-For-Checkout-Server-Cabinet-Multimedia-Disco-Kc-X50-Bk-Ok-/310822577252?pt=PCA_Mice_Trackballs&hash=item485e782464 (http://www.ebay.com/itm/Skidata-Ps-2-Keyboard-For-Checkout-Server-Cabinet-Multimedia-Disco-Kc-X50-Bk-Ok-/310822577252?pt=PCA_Mice_Trackballs&hash=item485e782464)
Hmmm, thanks. Lowered the price on mine then.Can someone tell me what is a good price for a set of RGBY Niqmod modifiers?i think i saw someone sell for 35, but it was w/o yellow 1x1
is $100 good for a new G80-1800HAU? Don't ask me where I found it
is $100 good for a new G80-1800HAU? Don't ask me where I found itNIB? Hell yes. Nice find!
Its used.......listing didn't say if it was new or not, but the sales rep replied to my email. Probally not going to buy it
btw found it on some medical equipment website
Its used.......listing didn't say if it was new or not, but the sales rep replied to my email. Probally not going to buy it
btw found it on some medical equipment website
http://www.dotmed.com/listing/ct-scanner/unknown/g80-1800hau-12/1213353
this?
Curious to see what my KBT Race with blue LED's and Cherry MX Reds is worth. I also have a Leopold FC700R in fair condition (some slight fading on the stock keys) that I got on a trip to ze motherland roughly a year and a half ago. Both keyboards are in good condition but I'm missing Cherry MX Blues so I might get rid of one of the two and pick up a keyboard with blues. Thank you in advance!I'd say like $90-$100 for the KBT race, and like $110-$120 for the FC700R since it's a bit rare.
PC:
HHKB Pro 2
HHKB Pro 2 Type-S
Let's say both are in good condition.
is $100 good for a new G80-1800HAU? Don't ask me where I found it
is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
I'm trying to persuade them to lower the price. They haven;t responded yet
is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
I'm trying to persuade them to lower the price. They haven;t responded yet
Did you ask how many they had?
is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
I'm trying to persuade them to lower the price. They haven;t responded yet
Did you ask how many they had?
Got the email. THey have only 1 and I got them to go to $40!!!!!!
Thats certainly a great find, nice :thumb:is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
I'm trying to persuade them to lower the price. They haven;t responded yet
Did you ask how many they had?
Got the email. THey have only 1 and I got them to go to $40!!!!!!
is $100 good for a new G80-1800HAU? Don't ask me where I found it
How about $120 shipped? Would that still be considered a good price?
(Attachment Link)
I'm trying to persuade them to lower the price. They haven;t responded yet
Did you ask how many they had?
Got the email. THey have only 1 and I got them to go to $40!!!!!!
Figuring out how to wire the money
Proof: (Attachment Link)
I don't see many WASD (v2) keyboards around here. I know it has thin ABS which isn't desired around here but the "barebones" keyboard is still made well. The keyboard is still fairly new so its in good condition and isn't shinny or anything. If I decide to get rid of this thing what kind of price should I expect to sell it for?
Pure pro with MX browns and ornage backlight? It has the ABS keycaps, but the board is essentially new.
I wanna say $110, but then again with my reputation I could be way off.
Kishsaver excluding shipping. Some mods including spacebar need repair.
I have one and am trying to sell it, but thanks.
Kishsaver excluding shipping. Some mods including spacebar need repair.
Price check on a few items
Red duck poker fully assembled
Used cherry DS
Brand new cherry DS
Red alert geekhack edition
Red alert OTD edition
G81-3116SDU
Desko RGB
Would I get more for 87 used stock blues, or for 87 used blues with springs from stock clears? Approximate price points for each?
Sorry for not clarifying!
Beige DS slight shine
Beige DS shine
Black DS brand new
Beige DS brand new
Hey guys, how much is a white hhkb2 worth (GBP), used for around 3 months?
Many thanks
pretty much perfect
Price check on a few items
Red duck poker fully assembled
Used cherry DS
Brand new cherry DS
Red alert geekhack edition
Red alert OTD edition
G81-3116SDU
Desko RGB
I would like to obtain multiple KBKs (HipsterPunk's keycaps) via trade and I'm offering an MX CC.
KBKs usually go for around 10.00 - 20.00 per, sometimes less, if I'm not mistaken.
The CCs I'm looking to trade are extras of Revenge Red, Mint, or F2 Blue, and these go for around hundred per.
For the trade, I'm thinking ratios . . .. but I'm not sure what would be fair; 1:2, 1:3 . . .
Any ideas would be appreciated. Thank you.
Used WYSE doubleshot set?
Used WYSE doubleshot set?
how used is used? Does the set shine?
I would like to obtain multiple KBKs (HipsterPunk's keycaps) via trade and I'm offering an MX CC.
KBKs usually go for around 10.00 - 20.00 per, sometimes less, if I'm not mistaken.
The CCs I'm looking to trade are extras of Revenge Red, Mint, or F2 Blue, and these go for around hundred per.
For the trade, I'm thinking ratios . . .. but I'm not sure what would be fair; 1:2, 1:3 . . .
Any ideas would be appreciated. Thank you.
More like 1:8 or higher. Enlighten me about these KBKs?
Used WYSE doubleshot set?
how used is used? Does the set shine?
Additionally, is it thick or thin Wyse.
Price Check? I was told this was unique when trading but who knows what to believe. He called it a Red Alert Brobot, I truthfully really could stand to make as much money on it as possible but it seems auctions are not allowed anymore so before I post it in classifieds I wanted to get a feel. Doesn't seem like a lot of V1s pop up anymore.You can host links to your own off site auctions in the thread in the marketplace
hi everyone
i saw these metal starcraft keycaps (http://imsto.cn/index.php?route=product/product&path=63&product_id=68) at imsto which i instantly fell in love with, but being new to customization, $60 seems super expensive and i'm pretty sure it doesn't include shipping.
the alternative would be these (http://item.taobao.com/item.htm?spm=a230r.1.14.59.ZCMaCa&id=36213450507), which seem to have a poorer finish, but they're 4 for almost half the price of the three above.'
thank you for any advice you might have.
hi everyoneTry the keycap thread
i saw these metal starcraft keycaps (http://imsto.cn/index.php?route=product/product&path=63&product_id=68) at imsto which i instantly fell in love with, but being new to customization, $60 seems super expensive and i'm pretty sure it doesn't include shipping.
the alternative would be these (http://item.taobao.com/item.htm?spm=a230r.1.14.59.ZCMaCa&id=36213450507), which seem to have a poorer finish, but they're 4 for almost half the price of the three above.'
thank you for any advice you might have.
Price Check? I was told this was unique when trading but who knows what to believe. He called it a Red Alert Brobot, I truthfully really could stand to make as much money on it as possible but it seems auctions are not allowed anymore so before I post it in classifieds I wanted to get a feel. Doesn't seem like a lot of V1s pop up anymore.You can host links to your own off site auctions in the thread in the marketplace
Price Check? I was told this was unique when trading but who knows what to believe. He called it a Red Alert Brobot, I truthfully really could stand to make as much money on it as possible but it seems auctions are not allowed anymore so before I post it in classifieds I wanted to get a feel. Doesn't seem like a lot of V1s pop up anymore.You can host links to your own off site auctions in the thread in the marketplace
Thanks for the suggestion, I'd really like to avoid ebay fees if possible.
Hello everyone I'm curious about how much I should ask for my phantom. I've just assembled it but I decided to go a different direction with a newer revision phantom. Here is a link to the photosShow Image(http://i.imgur.com/P3IID7M.jpg)Show Image(http://i.imgur.com/MEs4iAwl.jpg)
Indeed, if anything I think the different switches will only decrease the price.Hello everyone I'm curious about how much I should ask for my phantom. I've just assembled it but I decided to go a different direction with a newer revision phantom. Here is a link to the photosShow Image(http://i.imgur.com/P3IID7M.jpg)Show Image(http://i.imgur.com/MEs4iAwl.jpg)
What was the total cost of the build? My guess is that you'll have to subtract about 15-25% to get a sale. I don't think it helps that it has such a custom switch layout because it'll be hard to find someone who would want the same thing.
Hello everyone I'm curious about how much I should ask for my phantom. I've just assembled it but I decided to go a different direction with a newer revision phantom. Here is a link to the photosShow Image(http://i.imgur.com/P3IID7M.jpg)Show Image(http://i.imgur.com/MEs4iAwl.jpg)
Price Check? I was told this was unique when trading but who knows what to believe. He called it a Red Alert Brobot, I truthfully really could stand to make as much money on it as possible but it seems auctions are not allowed anymore so before I post it in classifieds I wanted to get a feel. Doesn't seem like a lot of V1s pop up anymore.You can host links to your own off site auctions in the thread in the marketplace
Thanks for the suggestion, I'd really like to avoid ebay fees if possible.
$85-$120
Hello everyone I'm curious about how much I should ask for my phantom. I've just assembled it but I decided to go a different direction with a newer revision phantom. Here is a link to the photosShow Image(http://i.imgur.com/P3IID7M.jpg)Show Image(http://i.imgur.com/MEs4iAwl.jpg)
Curious switches choice... but nice case. What'cha want for this board?
Was going to put all my clears in it but ended up just throwing some extras in it.
Hello everyone I'm curious about how much I should ask for my phantom. I've just assembled it but I decided to go a different direction with a newer revision phantom. Here is a link to the photosShow Image(http://i.imgur.com/P3IID7M.jpg)Show Image(http://i.imgur.com/MEs4iAwl.jpg)
Curious switches choice... but nice case. What'cha want for this board?
Was going to put all my clears in it but ended up just throwing some extras in it.
Hello,
What's the value for OG skidata caps off a skidata board?
Thanks :)
Merged your question into the ongoing price check thread.
To address your question, there are quite a few available on ebay but the shipping is a tad expensive, I would guess $75 for the set, at the most.
http://www.ebay.com/itm/Skidata-Ps-2-Keyboard-For-Checkout-Server-Cabinet-Multimedia-Disco-Kc-X50-Bk-Ok-/310822577252?pt=PCA_Mice_Trackballs&hash=item485e782464 (http://www.ebay.com/itm/Skidata-Ps-2-Keyboard-For-Checkout-Server-Cabinet-Multimedia-Disco-Kc-X50-Bk-Ok-/310822577252?pt=PCA_Mice_Trackballs&hash=item485e782464)
I'd say they're worth a lot less than $75. I have a set myself. They're german 1800 layout, so the uses are limited. Maybe about $20-40 depending upon condition.
How much is a DE Skidata set worth? It's in very good condition, almost all the keys have no shine at all. The enter key has some shine, and one or two letters are only just starting to show some shine. Spacebar has no shine. I really have no clue what to charge for this. Got it from a board that I bought from that ebay seller.
Didn't you answer this yourself :))?That's roughly what I reckon it's worth, yes. I'd like to hear a few more peoples thoughts on it.
How much would a Ruby red topre brobot, CC and gas mask go for respectively?
How much would a Ruby red topre brobot, CC and gas mask go for respectively?Ruby red brobot.. I guess anywhere between $35-100. Gas mask no idea. CC.. $300+ possibly $400-500+, since barely any exist in that colour
How much would a Ruby red topre brobot, CC and gas mask go for respectively?Ruby red brobot.. I guess anywhere between $35-100. Gas mask no idea. CC.. $300+ possibly $400-500+, since barely any exist in that colour
How much would a Ruby red topre brobot, CC and gas mask go for respectively?
How much would a Ruby red topre brobot, CC and gas mask go for respectively?
Topre brobot up to $150, CC $400, gas mask like $30
How much would a Ruby red topre brobot, CC and gas mask go for respectively?
Topre brobot up to $150, CC $400, gas mask like $30
I think brocaps should raise his prices if people value his caps so much.
How much would a Ruby red topre brobot, CC and gas mask go for respectively?
Topre brobot up to $150, CC $400, gas mask like $30
:eek: :eek: :eek:
And $150 for Irradiated Red BB V2 sounds about right, especially considering lots of people seem to love trans red.
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
Yes.
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
I did, so yes.
Do you guys think I can trade a HHKB2 in good condition for a 55g realforce board? (TKL or not)
I did, so yes.
Do you think it was worth it? Not really digging the 45g actuation force... Too light for me
Would like some input on this crazy one of a kind 1800?
RAPTOR K1 + plate + vintage Nixdorf Cherry black switches with clear tops + linear gray for spacebar
(http://i.imgur.com/ZSlqp8A.jpg) (http://i.imgur.com/ZSlqp8A.jpg)
PC on Quickfire TK reds used? New ones go for $65 a lot(after rebates), is $45 a good price or no?
Also PC on MX reds? Theyre not as common as say blacks so Im not sure about the price
PC on Quickfire TK reds used? New ones go for $65 a lot(after rebates), is $45 a good price or no?
Also PC on MX reds? Theyre not as common as say blacks so Im not sure about the price
Mechanicalkeyboards.com has reds now so less than they sell them probably.
And is the TK the revised version or original.
$45 on the CM TK is very reasonable price and you can sell it quick at it, I am not sure about the AEK but there are quite few on eBay for $20-$30 BIN.Thanks! I want to try out reds but don't want to waste my money if it turns out I don't like it
I have acquired a Cherry G80-5000 by sheer luck and found out it's apparently at least 200$ worth, if not a lot more. What concerns me is that the price paid for it varies wildly, some sell for 50$, others for over 2,000$. I'm waiting for a PS/2->USB converter to arrive to test both its AT and PS/2 port.
As for criteria that might help with estimating its price:
- QWERTZ layout
- 17 F-keys (all F-keys on the left side)
- no Windows keys
- no num pad
- split mechanism, "legs", extending space bar work
- looks fairly new, has been seldomly used
- doesn't come in a box or with a manual
- FCCID: GDDG80-5000
- Article No.: G80-5000HAADE /07
- Serial No.: G 002116 H22
I'll take a photo soon once I've cleaned it properly.
Do you guys think it's worth it to trade a relatively-new-looking(no shine on spacebar) 45g RF87U with a 2 month old FC660C? I got the RF from a fellow GHer, and I just noticed when I squeeze the top and bottom layers together at the bottom left corner, the squeaking noise it makes is really annoying.
Do you guys think it's worth it to trade a relatively-new-looking(no shine on spacebar) 45g RF87U with a 2 month old FC660C? I got the RF from a fellow GHer, and I just noticed when I squeeze the top and bottom layers together at the bottom left corner, the squeaking noise it makes is really annoying.
Are you asking trade the Realforce for a FC660C? Then yes do it.
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
Price check on a 2 year old realforce 103UB 55g in very good condition?
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
They haven't gone for more than $15 in the past. And I think that was the shipped price.
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
They haven't gone for more than $15 in the past. And I think that was the shipped price.
Are they relly Topre? I think they are MX.
They're neither. There are some Brother typewriters with caps that work with Topre switches. I believe some Brother typewriters are also Cherry ML. I have never seen an MX compatible Brother typewriter.
Hey all I was wondering how much a set of Sanctuary key caps would go for.
Hey all I was wondering how much a set of Sanctuary key caps would go for.
Originative has them for sale for $90 (http://www.originativeco.com/collections/keysets/products/sanctuary).
How much can I get for this Model M as is?Show Image(http://i.imgur.com/kt4vcRY.jpg)
How much can I get for this Model M as is?Show Image(http://i.imgur.com/kt4vcRY.jpg)
Condition of rivets?
Price check on a 2 year old realforce 103UB 55g in very good condition?
150-200 probably. not useful for Kandy Keyboards because the bottom row is hard to replace (space bar specifically, iirc) but it's a great board. also someone might want it to ruin both it and a poor hhkb :P
Where did you get those black caps? Did you just dye them?How much can I get for this Model M as is?Show Image(http://i.imgur.com/kt4vcRY.jpg)
Condition of rivets?
It's only missing a few.
Where did you get those black caps? Did you just dye them?How much can I get for this Model M as is?Show Image(http://i.imgur.com/kt4vcRY.jpg)
Condition of rivets?
It's only missing a few.
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
What is a white poker 2 with mx blues and a Ducky Shine 3 pink backlit and with mx blues worth? Both are in almost new condition as there are no damages and work perfectly.
http://www.ebay.com/itm/Cherry-G83-6105LRPDE-0-RS-6000-M-PS2-German-104-Keyboard-WW4-E-/351046902411?pt=PCA_Mice_Trackballs&hash=item51bc06a28bIt's a lasered rubberdome, so no.
Is this worth $20?
http://www.ebay.com/itm/Cherry-G83-6105LRPDE-0-RS-6000-M-PS2-German-104-Keyboard-WW4-E-/351046902411?pt=PCA_Mice_Trackballs&hash=item51bc06a28bIt's a lasered rubberdome, so no.
Is this worth $20?
So it is rubberdome, what do the keycaps look like underneath for cherry boards like this? Is it still the normal cherry keycap or is it a different design.It won't fit on any mechanical.
PC builders out there.
How much is a new + factory sealed in shrink wrap corsair enthusiast series TX 650 worth?
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
(Attachment Link)
(Attachment Link)
I just got a broken Epson Elite 300 typewriter, with what I think to be blue alps switches. The keycaps are what stand out though. They are filthy but if I clean them, how much do you think I could get for just the caps? Sorry for the ****ty phone quality! http://imgur.com/a/inUzm
What are they? I was under the impression that these were Blue AlpsI just got a broken Epson Elite 300 typewriter, with what I think to be blue alps switches. The keycaps are what stand out though. They are filthy but if I clean them, how much do you think I could get for just the caps? Sorry for the ****ty phone quality! http://imgur.com/a/inUzm
That typewriter definitely does not have Blue Alps.
What are they? I was under the impression that these were Blue AlpsI just got a broken Epson Elite 300 typewriter, with what I think to be blue alps switches. The keycaps are what stand out though. They are filthy but if I clean them, how much do you think I could get for just the caps? Sorry for the ****ty phone quality! http://imgur.com/a/inUzm
That typewriter definitely does not have Blue Alps.
Guys, how much are these worth?
(Attachment Link)
Guys, how much are these worth?
(Attachment Link)
Guys, how much are these worth?
(Attachment Link)
You might want to check in the Clack Info Thread (http://geekhack.org/index.php?topic=39794.0) and ask there since the price is rather subjective.
Guys, how much are these worth?
(Attachment Link)
$30.
Guys, how much are these worth?
(Attachment Link)
$30.
Pretty sure retail price was ~$23, then you subtract from that because its used, so Id say $20
How much 456gt(black) and 360corsa(apple silver)?GB price? ;D $50 or $100 over the GB price wouldn't be unreasonable, since most people on GH wouldn't be able to get their hands on those boards anyway.
both are not assembled and new.
i will quit this hobby, seriouly.
How much 456gt(black) and 360corsa(apple silver)?Add $100 for assembly to the GB price. I would buy the 360 if it were unassembled :'(
both are not assembled and new.
i will quit this hobby, seriouly.
He said not assembled and newAaaand I shouldn't answer price checks 2 minutes after I wake up. Completely missed the 'not' :))
Anyone have a clue on the worth of BS skull clacks in new flavours? I'm assuming gumrot green skull is new since I haven't seen any yet.
I highly recommend you stay away from asking about CC key appraisals as they tend to be a bit controversial.
How much can i get for a white version of Poker II with mx-red, in very good condition (i bought it since few weeks)?
Thanks
So, I'm trying to sell my phantom, and the question of the keycaps has come up. They're from the same board as donated the vintage black switches
http://i.imgur.com/F6SHOra.jpg
and I'm curious how much to add, or subtract if the offer is excluding, or including doubleshots as-pictures Orange arrow keys are pad printed, not from the donor kbd, and it's likely to stay that way unless I hear otherwise. Also, "fancy" keys such as F16 and "Send" I'm keeping because reasons, and the profile of some of the keys I'm using doesn't quite match the phantom layout.
So, as-pictured, what do you think I should offer to add/subtract from the otherwise working phantom? What do ancient doubleshots go for these days?
Hello all,
I am a long time lurker and first time poster. I have a brand new in the box SSK (Model M Space Saving Keyboard). Can I get some suggestions as to what its fair market value is? I purchased it brand new in 2002 and for a variety of reasons never ended up using it (my daily driver is a M13). I have opened the box to verify contents - the keyboard is spotless and even smells brand new, and the SDL cable is brand new in the bag. The numbers on the box end match the keyboard, of course. I've attached a bunch of pictures here - please let me know your thoughts. Also, is EBAY the best place to sell? I have a few other keyboards that I will be posting about later on as well.
Thanks in advance!
You just decreased its price by a lot by opening it. If it was BNIB, it would be worth a lot. Now unsealed, its price has decreased.
But some aussie GHer sold a few new SSKs for around 1K (I think)
But some aussie GHer sold a few new SSKs for around 1K (I think)Huh? Do you mean 1K total for all the SSKs he sold? I'm pretty sure one of his NIB SSKs sold for like $250. I'm certain NONE of his non-industrial SSKs came anywhere near 1K.
But some aussie GHer sold a few new SSKs for around 1K (I think)Huh? Do you mean 1K total for all the SSKs he sold? I'm pretty sure one of his NIB SSKs sold for like $250. I'm certain NONE of his non-industrial SSKs came anywhere near 1K.
hmm must have gotten numbers mixed up.Yeah, I think you did. Maybe you were thinking of the industrial SSKs he sold. I don't think any of his NIB SSKs even came near $500.
Price check on : Keyset from a G80-1501HAD. Two tone beige. German layout. Windowed lock keycaps. Lots of shine. Not much yellowing.
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
(Attachment Link)
(Attachment Link)
Any chance you could pull that apart and show us the PCB?
How much for the keycaps from this? They seem to be double/triple shot ABS and if I am not mistaken can also fit a topre keyboard. (I'll try to find my keycap puller soon to show pictures of the keycaps removed.Show Image(http://img1.etsystatic.com/001/0/5655152/il_570xN.403197397_54w3.jpg)
(Attachment Link)
(Attachment Link)
Any chance you could pull that apart and show us the PCB?
As for the value, well, do they fit on topre? That will determine whether they are worth something or zero. If yes, I'd say maybe $40ish? They are a cool novelty but since there would be severe profile mismatches, you probably wouldn't get a lot more than that. But that's just like, my opinion, man.
As for the value, well, do they fit on topre? That will determine whether they are worth something or zero. If yes, I'd say maybe $40ish? They are a cool novelty but since there would be severe profile mismatches, you probably wouldn't get a lot more than that. But that's just like, my opinion, man.
Yep they do fit topre.
As for the value, well, do they fit on topre? That will determine whether they are worth something or zero. If yes, I'd say maybe $40ish? They are a cool novelty but since there would be severe profile mismatches, you probably wouldn't get a lot more than that. But that's just like, my opinion, man.
Yep they do fit topre.
I saw that. Looks cool. I would still say $40, maybe as high as $50, but I don't see them going much higher than that since incomplete set and profile mismatches. Second opinions welcome.
As for the value, well, do they fit on topre? That will determine whether they are worth something or zero. If yes, I'd say maybe $40ish? They are a cool novelty but since there would be severe profile mismatches, you probably wouldn't get a lot more than that. But that's just like, my opinion, man.
Yep they do fit topre.
I saw that. Looks cool. I would still say $40, maybe as high as $50, but I don't see them going much higher than that since incomplete set and profile mismatches. Second opinions welcome.
I paid $25 for mine. I put them on yesterday and they're effectively unusable given the huge difference in profiles. Nice caps, but I wouldn't recommend them at all unless you can somehow cobble together a complete set including mods, and I don't think you can.
As for the value, well, do they fit on topre? That will determine whether they are worth something or zero. If yes, I'd say maybe $40ish? They are a cool novelty but since there would be severe profile mismatches, you probably wouldn't get a lot more than that. But that's just like, my opinion, man.
Yep they do fit topre.
I saw that. Looks cool. I would still say $40, maybe as high as $50, but I don't see them going much higher than that since incomplete set and profile mismatches. Second opinions welcome.
I paid $25 for mine. I put them on yesterday and they're effectively unusable given the huge difference in profiles. Nice caps, but I wouldn't recommend them at all unless you can somehow cobble together a complete set including mods, and I don't think you can.
Ah, I was hoping they would work better for you. I bet they look cool though!
The DAS Keyboard you posted is the new version that wasn't manufactured by Costar.
This one was produced by iOne in China - they are known for ****ty quality.
All the good things you read about DAS refer to the Costar One. If you don't need the numpad you could look for a brandnew Quickfire Rapid for ~60$!
The DAS Keyboard you posted is the new version that wasn't manufactured by Costar.
This one was produced by iOne in China - they are known for ****ty quality.
All the good things you read about DAS refer to the Costar One. If you don't need the numpad you could look for a brandnew Quickfire Rapid for ~60$!
Price check on G80-1800HFU?
Price check on G80-1800HFU?Condition?
Price check on G80-1800HFU?
That used one on ebay?
Price check on G80-1800HFU?
That used one on ebay?
Did you ever get that 1800 from Beverly?
What's it worth?
TG3 Keycaps for backlit TG3/Deck (do people with the fugly Deck font still buy these?)
CCnG (Base set + Tsangan Kit)
Hashbaz RGBY & MBC RGBY
Sanctuary set (base set + Tsangan kit)
MOBA QWER kit
Thanks in advance!
Everything is completely new and unused.
Hi hi. How much are keycaps from a Realforce 104Pro 10th Anniversary Edition worth? The spacebar has some shine. I'll take a picture soon. Here's a pic that isn't mine:I know for a fact that the owner licensed that picture as a CC-BY (https://creativecommons.org/licenses/by/2.0/).Show Image(http://i.imgur.com/xQXe704.jpg)
Hi hi. How much are keycaps from a Realforce 104Pro 10th Anniversary Edition worth? The spacebar has some shine. I'll take a picture soon. Here's a pic that isn't mine:I know for a fact that the owner licensed that picture as a CC-BY (https://creativecommons.org/licenses/by/2.0/).Show Image(http://i.imgur.com/xQXe704.jpg)
https://www.flickr.com/photos/dork_vader/sets/72157642361894514/
Price check on this Cherry PBT dyesub set? A little hard to tell, but sounds like the alphas are decent, spacebar is scratched, and numpad is fairly worn. I offered $110, maybe too low? What do you guys think?$110 is about right. It's a mixed set - see the alt gr key.
http://imgur.com/a/B9t5F
Could anybody tell me the current price for "like new" and "brand new in box" full size model m's?
How much for a looks-like-new-but-is-actually-not Realforce 87u 45g EK edition bought off a GHer, used for about a week?
Okay, thanks.How much for a looks-like-new-but-is-actually-not Realforce 87u 45g EK edition bought off a GHer, used for about a week?
prices are lower right now that usual
most likely $160 -180 tho
How much could I get for a relatively new Filco Majestouch 2 TKL? It has a few weeks of use, but it was purchased in 2012.
Why not mod it with a HID Liberation Device and a custom cable?
For a broken/for parts filco, with no idea what the problem is, I'd have trouble even justifying $50 USD. You have options for people in the states and Canada who do modding/repairs, depending on what the problem ends up being, it may be cheaper to pay someone to make the repair if you're not comfortable. It would depend on shipping, but I can't imagine a cable or controller repair costing more than a new board, even if you could get $50 for the board as-is.
Professional Services Directory: http://geekhack.org/index.php?topic=45886.0
For a broken/for parts filco, with no idea what the problem is, I'd have trouble even justifying $50 USD. You have options for people in the states and Canada who do modding/repairs, depending on what the problem ends up being, it may be cheaper to pay someone to make the repair if you're not comfortable. It would depend on shipping, but I can't imagine a cable or controller repair costing more than a new board, even if you could get $50 for the board as-is.
Professional Services Directory: http://geekhack.org/index.php?topic=45886.0
I don't have an issue doing the repair. I'm 95% sure the problem is either the cable or the controller (both of which are very easy) but I haven't been able to nail down which is the exact issue. My choices are to buy a new cable/controller together and then just have a spare, or take a gamble and buy one or the other and then possibly having to pay double postage if the one I buy first isn't the fix. An assembled/testing KittenPaw is $30+shipping and the cheapest replacement cables I've seen are $25 shipped so a repair certainly doesn't seem to be "cheap" considering I could just buy another board (RK9000 or some such) for like $80.
If you replace the controller and cable with a nicer one, I think you'll have a great keyboard and it'll boost the price back to about $100... it might pay off in the end.
Price check on 87 blues I took from a filco mj2.
Price check on 87 blues I took from a filco mj2.
20-25 cents each
Price check on 87 blues I took from a filco mj2.
20-25 cents each
About the same price on browns from an MX11800, would you say? ;)
How much does a Poker 2 go for used around here?
How much does a Poker 2 go for used around here?
How much does a Poker 2 go for used around here?
Gonna go army next Monday, I got some vintage browns to rid of ASAP.I'd say $0.50 is about right.. 2 questions :
Vintage browns, tuned lubed stickered, how much?
EDIT: the original switch parts were cleaned in an ultrasonic cleaner before being modded, so no dirty grime
Gonna go army next Monday, I got some vintage browns to rid of ASAP.I'd say $0.50 is about right.. 2 questions :
Vintage browns, tuned lubed stickered, how much?
EDIT: the original switch parts were cleaned in an ultrasonic cleaner before being modded, so no dirty grime
How do lubed vintage browns feel?
Could you go into some more detail about how they were cleaned? I have some dusty as hell nixdorfs that I want to clean out.
What do cherry POS boards go for? I think I want one.There are so many.. Need a specific model + the condition you want.
Fullsize in good condition? One of the ones with the credit card sliders.Doubleshots? Lasered? G80? G81? Black? Beige? Really, a model number would be much easier.
Fullsize in good condition? One of the ones with the credit card sliders.Doubleshots? Lasered? G80? G81? Black? Beige? Really, a model number would be much easier.
I wonder how much can I get for a few weeks old full size Filco MJ2 (white carbon colour, mx browns, blue o-rings, white side printed keycaps and original black keycaps)?
I wonder how much can I get for a few weeks old full size Filco MJ2 (white carbon colour, mx browns, blue o-rings, white side printed keycaps and original black keycaps)?
$120ish
Lately G80-1800s have been catching my eye. How much would a WKL ISO or ANSI G80-1800 be?The nice things about G80-1800's is that they have been used by many companies. And some varieties can be found cheaper, especially in Germany. Take a look at the Deskthority Wiki
Lately G80-1800s have been catching my eye. How much would a WKL ISO or ANSI G80-1800 be?The nice things about G80-1800's is that they have been used by many companies. And some varieties can be found cheaper, especially in Germany. Take a look at the Deskthority Wiki
Some come as low as €60 for new ones. Regular pricing is around €80-100
With a leeku why do you need an original 1800? You can just get a G81-1800 case for really cheap and put the leeku in that
With a leeku why do you need an original 1800? You can just get a G81-1800 case for really cheap and put the leeku in thatBecause it isn't made in Germany and cannot satisfy blaubaer's German fetish. D:
Just a quick question: how much is worth an IBM terminal like this one:Can you post a picture of the underside?Show Image(http://img18.allegroimg.pl/photos/oryginal/42/08/12/12/4208121221)
anybody?
My NORTHGATE COMPUTER SYSTEMS OmniKey 102. I think it's in pretty good condition, my grandfather picked it up new in the '80s and didn't touch it but to move it between houses till he gave it to me in 2007. I have lightly used it, but have set it to the side for fear of marring it in some way. I hope all the pictures included are enough for a valuation. If you have any more questions, let me know.
Not sure if I'm willing to sell it, but I thought it'd be fun to see what it would be worth to someone.
Gallery: http://imgur.com/a/XR4j7
My NORTHGATE COMPUTER SYSTEMS OmniKey 102. I think it's in pretty good condition, my grandfather picked it up new in the '80s and didn't touch it but to move it between houses till he gave it to me in 2007. I have lightly used it, but have set it to the side for fear of marring it in some way. I hope all the pictures included are enough for a valuation. If you have any more questions, let me know.
Not sure if I'm willing to sell it, but I thought it'd be fun to see what it would be worth to someone.
Gallery: http://imgur.com/a/XR4j7
White or Blue Alps? Probably Complicated Whites, but the switch type will affect the cost.
Can you post a picture of the underside?
From QWERkeys?Show Image(http://i.imgur.com/ha9xSWR.jpg)
The lettering is engraved/filled. Only the Alpha's. Any ideas on a price to ask? :p
From QWERkeys?
Show Image(http://i.imgur.com/ha9xSWR.jpg)
The lettering is engraved/filled. Only the Alpha's. Any ideas on a price to ask? :p
ErgoDox PCBs? The blue ones.
ErgoDox PCBs? The blue ones.
How much is a G80-2100HBD in good condition? I want one a lot.€65-85
How much is a G80-2100HBD in good condition? I want one a lot.€65-85
ErgoDox PCBs? The blue ones.
Bare PCBs? No more than $38 shipped.
What is a Filco Zero TKL with White ALPS worth? Must mention that the switch for the space bar has been swapped for a Green ALPS as I couldn't find a replacement White ALPS.edit: nvm, read wrong
siig minitouch with blue monterey switch? MIB.
As an experiment, I picked up a CM Storm QFR with blue switches and replaced them all with stock whites.
It's way too heavy for me so I'm debating just selling it.
Is $210 a fair price for this? That's basically the price of the board and switches, sans shipping.
Granted, it's technically a used keyboard.
Thanks
As an experiment, I picked up a CM Storm QFR with blue switches and replaced them all with stock whites.
It's way too heavy for me so I'm debating just selling it.
Is $210 a fair price for this? That's basically the price of the board and switches, sans shipping.
Granted, it's technically a used keyboard.
Thanks
I think you'll have a hard time recouping your costs on this one. A QFR with Blues goes for what, $75? Even adding in some premium for MX White switches, I'd think a fair price would be $100-$125 including shipping.
My reasoning is that your potential buyers would be comparing equivalent MX White keyboards, and although keyboards with that switch are uncommon, they're not super rare. (Plus, it's been my experience that people prefer Clears to MX Whites, which I find odd...)
Was typing up a similar response.
What I don't understand is people want to take the price of the board plus switch price, but you need to subtract the price of the original switches as well unless they are also included.
As an experiment, I picked up a CM Storm QFR with blue switches and replaced them all with stock whites
Is $210 a fair price for this?
Was typing up a similar response.
What I don't understand is people want to take the price of the board plus switch price, but you need to subtract the price of the original switches as well unless they are also included.
As an experiment, I picked up a CM Storm QFR with blue switches and replaced them all with stock whites
Is $210 a fair price for this?
Was typing up a similar response.
What I don't understand is people want to take the price of the board plus switch price, but you need to subtract the price of the original switches as well unless they are also included.
Even so...I was actually looking at TKL boards and here's what I got
Used but good QFR: 65-80
100 White switches: 50
Soldering + Desoldering: 0
I love soldering and it's a JOY to me. BUT even If I got paid at my salary to desolder, 1-2 hours for a board still won't make up the extra 100 (I make a modest amount. 50 an hour, NO)
This doesn't take into account depreciation, buyer risk, and the uncertainty that comes with your solder job (we have no way of knowing if you're good or not)
I'd value your board at 100 ish, probably less. That's just me. If it was lubed and spring swapped you could probably charge more for labor and finders/sourcing fee.
As an experiment, I picked up a CM Storm QFR with blue switches and replaced them all with stock whites
Is $210 a fair price for this?
Was typing up a similar response.
What I don't understand is people want to take the price of the board plus switch price, but you need to subtract the price of the original switches as well unless they are also included.
Even so...I was actually looking at TKL boards and here's what I got
Used but good QFR: 65-80
100 White switches: 50
Soldering + Desoldering: 0
I love soldering and it's a JOY to me. BUT even If I got paid at my salary to desolder, 1-2 hours for a board still won't make up the extra 100 (I make a modest amount. 50 an hour, NO)
This doesn't take into account depreciation, buyer risk, and the uncertainty that comes with your solder job (we have no way of knowing if you're good or not)
I'd value your board at 100 ish, probably less. That's just me. If it was lubed and spring swapped you could probably charge more for labor and finders/sourcing fee.
Perfect, thanks for the input all.
I guess I'll just hold onto it for now, and consider taking finger steroids. That's a thing, right? :thumb:
siig minitouch with blue monterey switch? MIB.
At least $150, maybe $200 from the right buyer.
Raptor K1 Gaming Glow in the Dark keycaps?
They are basically black Cherry relegendables where the translucent cap is GID
Haha you can almost buy a whole Raptor board for that. I think they are worth no more than $4/ea.In Germany, yes. ;)
Haha you can almost buy a whole Raptor board for that. I think they are worth no more than $4/ea.
Haha you can almost buy a whole Raptor board for that. I think they are worth no more than $4/ea.
I think tinlong sold 14 of them for that $45 so that comes to ~$3.21 each.
Haha you can almost buy a whole Raptor board for that. I think they are worth no more than $4/ea.
I think tinlong sold 14 of them for that $45 so that comes to ~$3.21 each.
It was 16.
2012 Filco MJ2 w/ blues and a slightly sticky left win key? I need to sell this thing
How much would a LNIB blank FC660C cost? (The old one)
It is the WIn key and it has to do with the switch or the spring. Probably easily fixed.2012 Filco MJ2 w/ blues and a slightly sticky left win key? I need to sell this thing
Saw a NIB with blacks in classifieds for 100. What causes the sticky shift? Keycap, switch, or stabilizer?
How much does an ergo dox plastic/acrylic case cost?? Might end up with a pcb mounted ergo dox without a case from a local friend. Might wanna grab a case.. even though desoldering is a pain in the ass.
How much does an ergo dox plastic/acrylic case cost?? Might end up with a pcb mounted ergo dox without a case from a local friend. Might wanna grab a case.. even though desoldering is a pain in the ass.
I haven't seen any aftermarket acrylic cases other than the aluminum/acrylic cases that MK.com has for sale. They are $109 shipped (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=798).
If you find any others, please let me know.
Do you know the dimensions? If it can fit on my 3d printer I can print some for myself and other people
Do you know the dimensions? If it can fit on my 3d printer I can print some for myself and other people
You can download the case files here (http://ergodox.org/Downloads.aspx).
How much does an ergo dox plastic/acrylic case cost?? Might end up with a pcb mounted ergo dox without a case from a local friend. Might wanna grab a case.. even though desoldering is a pain in the ass.
I haven't seen any aftermarket acrylic cases other than the aluminum/acrylic cases that MK.com has for sale. They are $109 shipped (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=798).
If you find any others, please let me know.
How much would a Filco modded to 65g clears and blues be worth?
Here's a pic of it:Show Image(http://i.imgur.com/azlMwzl.png)
How much would a Filco modded to 65g clears and blues be worth?
Here's a pic of it:Show Image(http://i.imgur.com/azlMwzl.png)
Where's the case?
If it's complete, I'd say the normal $100-150 they seem to be going for. Since you have a wonky mess of clicky and tactile switches, it might have to go lower. If there's no case, even cheaper, like sub-$100, but still above $50.
How much can I get for a barely used(2-3 months light use, no shine)Filco TKL with blacks?
Black and white GMK space bars, both colors/sizes, does anyone have an idea of how much they're going for?
I was mainly inquiring because I used different types of switches and didn't know how much that would affect value.
Black and white GMK space bars, both colors/sizes, does anyone have an idea of how much they're going for?
$8.
https://bingecap.com/product/gmk-space-bar/ (https://bingecap.com/product/gmk-space-bar/)
First. Do ergodox plates exist? If so, what do they cost?
First. Do ergodox plates exist? If so, what do they cost?
Acrylic plates are a part of the litster's design.
czarek has recently posted a picture of an aluminium plate, will sell it for €10 or something like that.
How much for a looks-like-new-but-is-actually-a-few-months-old Realforce 45g EK Edition with all accessories, no shine on spacebar?
Smith-Corona?
Any idea on what a terminal 122 key Model M is worth? Should have checked before getting it but still :D
How much would a clean Model M SSK (all keycaps, minor/no blemishes, little yellowing etc.) be worth? I'm in the market for one and was wondering how much I should pay.
How much would a clean Model M SSK (all keycaps, minor/no blemishes, little yellowing etc.) be worth? I'm in the market for one and was wondering how much I should pay.
You picked a good time to buy. About $200 right now.
Last winter they were going for $300-400+ but today they are selling in the high-$100s.
I recommend buying now, while prices are in a slump.
Thanks! Any idea where I might find one? The only one I can find on eBay right now is pretty rough.
Just keep an eye on the classifieds here. It shouldn't take more than a week or two for a nice one to pop up.
Just keep an eye on the classifieds here. It shouldn't take more than a week or two for a nice one to pop up.
That's what I figured. I guess a WTB thread couldn't hurt either. Thanks for you help!
You'll need 60 posts to post a thread in the classifieds section.
Any idea on what a terminal 122 key Model M is worth? Should have checked before getting it but still :D
Since it will have to be modified to make it work on a PC, I'd suggest $15-$25. Add a Teensy controller and a USB cable and it's probably worth $40.
All depending on condition, of course. I'm basing these estimates on clean and even bolt-modded Model M's going for $50. The 122-key variants are interesting, but not everyone appreciates the battleship size and awesome array of keys. [Btw, I've owned two; one IBM and one Unicomp. The IBM was free for the cost of shipping, the Unicomp was NIB for $50.]
Generally speaking, how much are ordinary used Alps-compatible doubleshots worth?It would depend on which set, since the stabilisers are often different.
Generally speaking, how much are ordinary used Alps-compatible doubleshots worth?
How much is a G84-4700 worth?
How much is a G84-4700 worth?For reference.. There's a black one on OTD for sale at about $50. Not sure if that's an accurate market value though.
$5 topsWhere'd you get that from? :)) :))
How much is a G84-4700 worth?
$5 tops
How much is a G84-4700 worth?For reference.. There's a black one on OTD for sale at about $50. Not sure if that's an accurate market value though.$5 topsWhere'd you get that from? :)) :))
How much is a G84-4700 worth?For reference.. There's a black one on OTD for sale at about $50. Not sure if that's an accurate market value though.$5 topsWhere'd you get that from? :)) :))
Full Miami set with GH extras?
noneFull Miami set with GH extras?
Any shine?
How much do the stock keycaps from a Ducky Pro usually go for? These are the black on grey dyesubs, uber-thick style, with the four app keys - ANSI layout.
I've got a few to ask about
How much should I ask for a Cherry Clear POS board? keycaps are thin PBT but hella dirty
Yeah it's one of those, just cleaned up and fully tested. Those sold out after a good number of units were sold, I was hoping that there was still enough of a demand that I could get a little bit of a profit
cherry clears just weren't for me, y'know?
How much do the stock keycaps from a Ducky Pro usually go for? These are the black on grey dyesubs, uber-thick style, with the four app keys - ANSI layout.
I'd say about 15 or 20 bucks - if they in pristine condition. But I am prone to mistakes ;) Maybe to Ducky owners they're worth more, I don't know.
How much do the stock keycaps from a Ducky Pro usually go for? These are the black on grey dyesubs, uber-thick style, with the four app keys - ANSI layout.
I'd say about 15 or 20 bucks - if they in pristine condition. But I am prone to mistakes ;) Maybe to Ducky owners they're worth more, I don't know.
Yeah it's one of those, just cleaned up and fully tested. Those sold out after a good number of units were sold, I was hoping that there was still enough of a demand that I could get a little bit of a profit
cherry clears just weren't for me, y'know?
You might be able to, but it would be a **** move to sell it for profit unless you did something to improve it in some way.
How much do the stock keycaps from a Ducky Pro usually go for? These are the black on grey dyesubs, uber-thick style, with the four app keys - ANSI layout.
I'd say about 15 or 20 bucks - if they in pristine condition. But I am prone to mistakes ;) Maybe to Ducky owners they're worth more, I don't know.
WHAT. The ISO Ducky thick PBT keycaps goes for 50€/$68 at teraset.net and it seems like the ANSI thin Ducky PBT goes for $53 @ mechanicalkeyboards.com...
How much do the stock keycaps from a Ducky Pro usually go for? These are the black on grey dyesubs, uber-thick style, with the four app keys - ANSI layout.
I'd say about 15 or 20 bucks - if they in pristine condition. But I am prone to mistakes ;) Maybe to Ducky owners they're worth more, I don't know.
WHAT. The ISO Ducky thick PBT keycaps goes for 50€/$68 at teraset.net and it seems like the ANSI thin Ducky PBT goes for $53 @ mechanicalkeyboards.com...
So... I'm guessing around $50 would be a decent rate for the set? I'll probably list it for less, as I can't find the damned calculator key - one of the four special function row above the number pad. :mad:
By the way, those Ducky Premier keyboards with the Nordic Cream Cheese & Green PBT (and MX Green switches!) at Teraset.net look absolutely drool-worthy... If they're planning on making an ANSI layout for these I'd be seriously tempted.
How much is a Cherry G80-MX5000 with matching MX5700 numpad worth?$1000~, although some people would disagree with me..
I found someone online who is selling one.
ANSI layout, no box.
Geez, the highest I've ever seen those go for is a few hundred...How much is a Cherry G80-MX5000 with matching MX5700 numpad worth?$1000~, although some people would disagree with me..
I found someone online who is selling one.
ANSI layout, no box.
^yes, that is three zeros
Geez, the highest I've ever seen those go for is a few hundred...ISO layout probably
How much is a Cherry G80-MX5000 with matching MX5700 numpad worth?
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
How much is a Cherry G80-MX5000 with matching MX5700 numpad worth?Don't low ball it with €100. ^^ I'm not a Dutch but I'm pretty familiar with taht site. :p
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
Damnit Tinnie :PHow much is a Cherry G80-MX5000 with matching MX5700 numpad worth?Don't low ball it with €100. ^^ I'm not a Dutch but I'm pretty familiar with taht site. :p
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
Damnit Tinnie :PHow much is a Cherry G80-MX5000 with matching MX5700 numpad worth?Don't low ball it with €100. ^^ I'm not a Dutch but I'm pretty familiar with taht site. :p
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
He did! Last bid I saw was €175.oh he removed our bids.Damnit Tinnie :PHow much is a Cherry G80-MX5000 with matching MX5700 numpad worth?Don't low ball it with €100. ^^ I'm not a Dutch but I'm pretty familiar with taht site. :p
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
yes, $1k.He did! Last bid I saw was €175.oh he removed our bids.Damnit Tinnie :PHow much is a Cherry G80-MX5000 with matching MX5700 numpad worth?Don't low ball it with €100. ^^ I'm not a Dutch but I'm pretty familiar with taht site. :p
I found someone online who is selling one.
ANSI layout, no box.
EDIT:Show Image(http://i.imgur.com/GcmBNi2.jpg)
Seems like he is expecting much more.
How much should I expect for a nice sleeved custom cable?
ANSI 5000+5700 I would say realistic market value is something like $500-600... of course some silly person will pay more than $1000 for them. It always makes me wonder why Cherry hasn't come up with a 2.0 version. They could easily sell them for at least $200 even with modern laser keys with little effort.I agree that $500-600 is a more sensible price, but if someone is willing to pay $1000+ then surely that is the market value?
How much do ducky S3's usually go for?
I just moved to taiwan and i've been thinking about acting as a ducky distributor to make some money on the side.
How much is a Dell quitekey (beige) worth?
Anyone know what a Rosewill RK-9000BR would go for used?
OEM ABS caps, normal shine on most caps, little more than the rest on A, S, D, F, J, Shift, and Space.
Post USB fix model.
Just looking for a ballpark really since I can't post photos.. (at work ATM)
Ducky 9008 g2 w/ MX blacks, no keycaps
Anyone know what a Rosewill RK-9000BR would go for used?
OEM ABS caps, normal shine on most caps, little more than the rest on A, S, D, F, J, Shift, and Space.
Post USB fix model.
Just looking for a ballpark really since I can't post photos.. (at work ATM)
$50 or so.
A lightly used no shine RF 87u EK Edition?
So, an RT-101 with linear space invaders and an FK2001 worth anything? Here's some pictures: http://imgur.com/a/DtMgt
hey I found this keyboard at a surplus store. It's got an RJ45 terminal connector. http://imgur.com/a/auAr0
how much should I sell it for? It's missing the F16 cap.
How much would these masks?
(Attachment Link)
Please Let me know each key caps price.
What would a cherry 684 4700 numpad be worth, pretty much unused? I got it, opened the box, and its been sitting in a drawer for around 2 weeks as I decided I prefer mx reds over the ml blacks for osu :p
hey I found this keyboard at a surplus store. It's got an RJ45 terminal connector. http://imgur.com/a/auAr0
how much should I sell it for? It's missing the F16 cap.
~$10 Terminal M122s are quite common
Price check on stainless TKL plate.The Universal TKL ones (http://geekhack.org/index.php?topic=55555.0)?
Price check on stainless TKL plate.The Universal TKL ones (http://geekhack.org/index.php?topic=55555.0)?
Was hoping for one without the easy open switch holes but either will work. Reason for wanting one without those openings is because of a couple mods I want to do I need all the room I can get in that space between switches of the same row.
Price check on stainless TKL plate.The Universal TKL ones (http://geekhack.org/index.php?topic=55555.0)?
What is a Model M 1391401 made in mexico with removable cable and a Model F 6110345 worth?
Good condition both.
What is a Model M 1391401 made in mexico with removable cable and a Model F 6110345 worth?
Good condition both.
These days, $60-80+ for the M and $100+ for the F.
A year ago, it would have been half that for the M.
F prices are crazy, that one could go for $80 or $180 and no predicting which.
I just tested and some of the keys dont click as loudly to dont really have a click on the model F*. Is this a case of bad rivets too?
Where can I get a 356mini, and how much do they usually go for?You'd probably have to find one on the classifieds. Jcrouse sold his for $450 a few months ago.
I just tested and some of the keys dont click as loudly to dont really have a click on the model F*. Is this a case of bad rivets too?
The Model F does not have rivets, it is a completely different build.
If the electronics work (ie it is not DOA when you plug it in) then mechanical problems can almost always be fixed if you are taking it apart anyway.
Many "click" problems are the simple result of key stems not being seated properly.
How much is a Design#1 FMJ 60% case with the brass poker weights?
Does the $180 version include them brass weights?How much is a Design#1 FMJ 60% case with the brass poker weights?
If it's the premium version, then $250, if it's the non-premium then around $180.
Does the $180 version include them brass weights?
What is an Apple Keyboard II (Alps) worth? It is the last mechanical keyboard made by Apple before switching to rubber dome.
1. How much are stock abs key caps for poker 2 worth?
2. How much are stock pbt key caps for poker 2 worth?
3. How much are the pbt rgb modifiers for the poker 2 worth?
(4. Would anyone even buy stock abs key caps?)
A lightly used, no shine g80-5000?What layout?
A lightly used, no shine g80-5000?
ANSIDoes it include the box? Does it have cyrillic characters or not (I only ask because you're in Russia)?
Without box and cyrillic alphasANSIDoes it include the box? Does it have cyrillic characters or not (I only ask because you're in Russia)?
That's a very rare board you have there. It's very hard to put a value on it since it has cyrillic characters. Nobody has ever sold one of those on GH/DT/ebay.Thanks for answer. You right it my mistake: without box, with cyrillic keycaps
A used, good condition ANSI 5000 sold for $550 on ebay very recently. It came with a box but did not have cyrillic characters.
The cyrillic characters will add quite some value to it, but the lack of a box will reduce its value.
Somewhere around $600-750 I would say.
EDIT : Sorry, the way you phrased it could mean that it's WITHOUT cyrillic alphas, or that it has cyrillic alphas. My bad if I misunderstood.
What is an Apple Keyboard II (Alps) worth? It is the last mechanical keyboard made by Apple before switching to rubber dome.
I just sold a really nice one with dampened cream Alps on ebay for $35 + shipping and a fairly nice one with dampened whites for $29 + shipping.
A lightly used, no shine g80-5000?
It looks to be in great condition. Maybe I'll just keeps it as a collectors item.
It looks to be in great condition. Maybe I'll just keeps it as a collectors item.
I used to run into those at second-hand shops every few months, but haven't seen one in at least a year now. The original AEK is far more desirable, in my opinion, but much less common (there looks to be a really nice one on ebay now for about $80), than the AEK2, but some people feel the opposite.
They will not work without an ADB-to-USB adapter ($25 on ebay) and are very prone to yellowing. I have gotten several with dead switches, but that is not too hard to fix.
Those old Apple PBT keys are the best Alps keys ever made, in my opinion, but the stupid legends and bizarre layout configurations make them hard to use on other boards unless you are OK with a mis-match.
Cool, I just picked up one from the Goodwill website for $5.
38GT + FMJ case new 100% ( ergo clear 59g, plate, sticker, lube , you can customize the led color) - 410$ keycap not include ( NEVER USE)MoreShow Image(http://i.imgur.com/pY7B8rR.jpg)Show Image(http://i.imgur.com/zqoiC9o.jpg)Show Image(http://i.imgur.com/Xd9ULUc.jpg)
(Attachment Link)
(Attachment Link)
This goldtouch numpad?
Add springs under domes and you have a Topre right there :rolleyes:(Attachment Link)
(Attachment Link)
This goldtouch numpad?
Looks like domes with sliders? If so, pretty much nothing.
Add springs under domes and you have a Topre right there :rolleyes:
This goldtouch numpad?
they isThis goldtouch numpad?
If those caps are Alps-compatible, they might be worth something on their own!
If those caps are Alps-compatible, they might be worth something on their own!they is
There aren't many Alps numpads so I don't think there's much use for them.
thank you for previous answer
fine some more caps.
(Attachment Link)
how much these caps?
all are mx.
thank you for previous answer
fine some more caps.
(Attachment Link)
how much these caps?
all are mx.
That's 2 brobot v1s and a CC?
brobots usually get sold for cost -- usually around $20-30 depending on the cap iirc.
Clacks don't usually get discussed in this thread because people have wildly differing opinions on what a reasonable price is for them. There's a separate thread for those.
That's 2 brobot v1s and a CC?
brobots usually get sold for cost -- usually around $20-30 depending on the cap iirc.
Clacks don't usually get discussed in this thread because people have wildly differing opinions on what a reasonable price is for them. There's a separate thread for those.
V1s.sometimes go in the.$100+ range too. As far as I'm concerned, at cost for all of them is fair, but appraising any artisan cap in here tends to be frowned upon.
He has said that with the V2s (and props to him on that), but I have seen V1s go for a pretty wide price range.
thank you for previous answer
fine some more caps.
(Attachment Link)
how much these caps?
all are mx.
That's 2 brobot v1s and a CC?
brobots usually get sold for cost -- usually around $20-30 depending on the cap iirc.
Clacks don't usually get discussed in this thread because people have wildly differing opinions on what a reasonable price is for them. There's a separate thread for those.
That's 2 brobot v1s and a CC?
brobots usually get sold for cost -- usually around $20-30 depending on the cap iirc.
Clacks don't usually get discussed in this thread because people have wildly differing opinions on what a reasonable price is for them. There's a separate thread for those.
V1s.sometimes go in the.$100+ range too. As far as I'm concerned, at cost for all of them is fair, but appraising any artisan cap in here tends to be frowned upon.
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Sea green? Do they....smell of salt water and kelp? :p
But really, is sea green a thing?
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Sea green? Do they....smell of salt water and kelp? :p
But really, is sea green a thing?
That is just what they look like *shrug* I don't have much experience with alps keys.
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Does it have a wang logo on it? If so I would like to buy it
Wang MEC-101S with sea green alps, doubleshot keys except for Print Screen, 1.5x mods with 7x spacebar, and bigass enter with 1x backspace
Does it have a wang logo on it? If so I would like to buy it
Pacifist needs more wang in his life ;)
I've been cleaning out my closet and found some old group buy stuff that I want to off-load. Not really sure what it's all worth these days. I've got a few tsangan kits from various keysets, Cherry replica RGBY, black moogle kit, Red Cherry sets.I'm sure someone would want them. I know the rag tsangan kit was really hard to find. When I was looking for it the few kits I saw wouldn't split the set (tkl+tsangan).
"Back in the day" I'd price these kits at $15-$20 but I'm wondering if there's still any demand for them.
I've been cleaning out my closet and found some old group buy stuff that I want to off-load. Not really sure what it's all worth these days. I've got a few tsangan kits from various keysets, Cherry replica RGBY, black moogle kit, Red Cherry sets.
"Back in the day" I'd price these kits at $15-$20 but I'm wondering if there's still any demand for them.
I've been cleaning out my closet and found some old group buy stuff that I want to off-load. Not really sure what it's all worth these days. I've got a few tsangan kits from various keysets, Cherry replica RGBY, black moogle kit, Red Cherry sets.I'd say price them as they went for before or even more, make sure to pm me before you decide to sell them ;) ;D
"Back in the day" I'd price these kits at $15-$20 but I'm wondering if there's still any demand for them.
Went full potato for these:Show Image(http://i.imgur.com/luTCivZ.jpg)Show Image(http://i.imgur.com/aiV4KFr.jpg)Show Image(http://i.imgur.com/HHwMbKY.jpg)Show Image(http://i.imgur.com/zzyj3cc.jpg)
If I have to take it apart for the switches/keycaps that isn't a problem
You might be able to use one of these: http://www.walmart.com/ip/36259391?wmlspartner=wlpa&adid=22222222227024620057&wl0=&wl1=g&wl2=c&wl3=42124348621&wl4=&wl5=pla&wl6=71391702661&veh=sem
I recently bought a vintage Mac SE computer at an estate sale and it came with this Apple Extended keyboard. Any ideas?
I recently bought a vintage Mac SE computer at an estate sale and it came with this Apple Extended keyboard. Any ideas?
Bad photo. If those are orange switches in a M0115, you were very lucky to get one so un-yellowed.
You should be able to get $50 easily if it tests good, possibly more.
The board is in amazing condition (the mac se even came with the original manuals and software. this guy took care of his stuff).
Long shot, price check on MKC metal starcraft/alliance keycaps with some backlight compatability.
Long shot, price check on MKC metal starcraft/alliance keycaps with some backlight compatability.
Shouldn't you know exactly how much these cost since you are going to sell them soon via a GB?
How much for an assembled 38gt + FMJ #1 combo?No idea but when you aim to sell hit me up as I may be interested ;p
Long shot, price check on MKC metal starcraft/alliance keycaps with some backlight compatability.
Shouldn't you know exactly how much these cost since you are going to sell them soon via a GB?
market research? :))
Long shot, price check on MKC metal starcraft/alliance keycaps with some backlight compatability.
Shouldn't you know exactly how much these cost since you are going to sell them soon via a GB?
market research? :))
Not exactly a GB, self investment.
Long shot, price check on MKC metal starcraft/alliance keycaps with some backlight compatability.
Shouldn't you know exactly how much these cost since you are going to sell them soon via a GB?
market research? :))
Not exactly a GB, self investment.
Well the decent thing would be to sell them at cost plus shipping and account a few dollars for your time.
You are right that isn't a group buy you bought them to resell so you'll have to get your 25 posts and 2 months in so you can post a classifieds thread. Unless you sell on ebay or something.
Hello everyone,
My friend asked me about how much should he pay for a used realforce 101(seems ok-good condition) i dont know about the value of old realforce so i might need you guys help. ( it seems not much out there?)
Thanks!!
Hello everyone,
My friend asked me about how much should he pay for a used realforce 101(seems ok-good condition) i dont know about the value of old realforce so i might need you guys help. ( it seems not much out there?)
Thanks!!
I'd tried to get -20% from the price of new one. If it really in good condition :)
I have too many boards, and I've not touched this one in months, Been thinking of selling/trading it to finance some more projects.
QFR ( originally with mx blacks )
Painted case ( will also include an in package black stock case )
Stock caps ( never used )
white blank WASD keyset
changed the LED's from red to white.
Currently, the main keys are stock clear switches, with blacks elsewhere, but I could change them to all blacks, or a hybrid of clears and browns with black springs. ( or all reds )
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_0518_zpsf326ec86.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_0518_zpsf326ec86.jpg.html)
Condition?
I have too many boards, and I've not touched this one in months, Been thinking of selling/trading it to finance some more projects.
QFR ( originally with mx blacks )
Painted case ( will also include an in package black stock case )
Stock caps ( never used )
white blank WASD keyset
changed the LED's from red to white.
Currently, the main keys are stock clear switches, with blacks elsewhere, but I could change them to all blacks, or a hybrid of clears and browns with black springs. ( or all reds )
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_0518_zpsf326ec86.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_0518_zpsf326ec86.jpg.html)
I usually see Model Ms in that good of a condition go for $30-35 plus shipping,
Yeah, more in the $60 range plus shippingI usually see Model Ms in that good of a condition go for $30-35 plus shipping,
I have not been in the Model M market for a while. What you say is about right for recent years, but I was under the impression that "classic" M prices had been spiking in recent months, and are now at about parity with new Unicomps.
I have too many boards, and I've not touched this one in months, Been thinking of selling/trading it to finance some more projects.
QFR ( originally with mx blacks )
Painted case ( will also include an in package black stock case )
Stock caps ( never used )
white blank WASD keyset
changed the LED's from red to white.
Currently, the main keys are stock clear switches, with blacks elsewhere, but I could change them to all blacks, or a hybrid of clears and browns with black springs. ( or all reds )
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_0518_zpsf326ec86.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_0518_zpsf326ec86.jpg.html)
thinking about selling my mkawa-built SSK. it has new internals but an older case (has a few scuffs and lifts in the bottom left corner). will include a 10ft sdl to usb cable.
Wondering if someone could help me with a price on my beige Filco TKL (ANSI layout).
Board features:-
MX Black switches with 45g springs from Originative
Stainless steel plate
Digital Camo replacement cable
Macross DSA caps
Bearing in mind the above mods and included keycaps, how much could I expect?Show Image(http://i.imgur.com/ASA1n5L.jpg)
Full set of pics here:- http://imgur.com/a/XHunM\ (http://imgur.com/a/XHunM\)
Thanks!
James
Unassembled King Saver - how much?
Thanks
Yes, I think your cost would be the main determinant... that said, I think somewhere in the neighborhood of $350 would be fair, maybe even as high as $400 since new Kingsavers are incredibly scarce at this point.
OK, looking for price check on:
Cherry MX blacks
Cherry MX browns
Cherry MX blues
Switches are all PCB mounted.
Some are brand new, some are used, none are in bad condition eg rusted corroded. As they are all from G80-8200; G80-8113 keyboards that don't look too old, I'm not sure about 'vintage'. These are 1990s and later keyboards.
MX Black switches with 45g springs from OriginativeBoard: 20~30% off retail depending on the condition, account age
Stainless steel plate
Digital Camo replacement cable
Macross DSA caps
MX Black switches with 45g springs from OriginativeBoard: 20~30% off retail depending on the condition, account age
Stainless steel plate
Digital Camo replacement cable
Macross DSA caps
Springs: I wouldn't put this into the mix, it's more of a "personal" mod, and some people would immediately switch this out
Plate: I'd give it a 5~10% off tops
Cable: Full price for this if it's well maintained(no fraying)
DSA: Also 5% off, full price if there's no visible wear
PC on deck legend with no case? Heavily used
Glad I could help.MX Black switches with 45g springs from OriginativeBoard: 20~30% off retail depending on the condition, account age
Stainless steel plate
Digital Camo replacement cable
Macross DSA caps
Springs: I wouldn't put this into the mix, it's more of a "personal" mod, and some people would immediately switch this out
Plate: I'd give it a 5~10% off tops
Cable: Full price for this if it's well maintained(no fraying)
DSA: Also 5% off, full price if there's no visible wear
Awesome thanks!
That is around the mark that I was thinking too :thumb: Just wanted confirmation
What's a Steel Brobot Topre worth these days?
What's a Steel Brobot Topre worth these days?
I bought it second-hand, would it be bad to sell it for the price i bought it for? (not saying i'm selling)What's a Steel Brobot Topre worth these days?
Bro discourages profiteering on his caps, so like nubs said, what you paid for it.
I bought it second-hand, would it be bad to sell it for the price i bought it for? (not saying i'm selling)No, of course not. That's pefectly reasonable.
Cherry DS WoB set?
$35 or something, no?
Good to know, thank you :)I bought it second-hand, would it be bad to sell it for the price i bought it for? (not saying i'm selling)No, of course not. That's pefectly reasonable.
$35 for a shiny wob set seems a bit much to me..
Does anyone have any DSA/SA caps so I can try them out? Im scared to participate in group buys and such because I am leary about how I feel about the profile. .-.
Does anyone have any DSA/SA caps so I can try them out? Im scared to participate in group buys and such because I am leary about how I feel about the profile. .-.
How much for original Cherry beige DS?
Cape BretonDoes anyone have any DSA/SA caps so I can try them out? Im scared to participate in group buys and such because I am leary about how I feel about the profile. .-.
Are you in Toronto? ;)
What's model m coiled PS2 cable in good condition worth?
1990 Model M. Very good condition.Considering the spike in model m prices, for an immaculate m $70-80, very good probably $60
1990 Model M. Very good condition.Considering the spike in model m prices, for an immaculate m $70-80, very good probably $60
Oh yeah :D1990 Model M. Very good condition.Considering the spike in model m prices, for an immaculate m $70-80, very good probably $60
Thanks! So $40 on craigslist is a good deal? Lol
Bolt modded M with new springs, and customers choice of color for new caps (old ones don't want to clean up).If the case is in good condition (no scratches or anything) you could probably get $80-90. Someone feel free to correct me if I'm wrong, this just seems to be what they've been going for lately
CM quickfire tk blue (UK ISO)$70 shipped
How much is the IBM TrackPoint II Model M13 worth? I think I found a pretty good deal for one.They can go for up to $100+
What are the Cherry MX Salute and Nightowl CCs worth?
Why should he go to that thread for a price appraisal? That's the whole purpose of this thread. We're not creating different threads for price checks on different items. That thread is for INFO on those caps, not price checks.
Also, IF the opinion of the staff is that there is another thread for price checks on different items, then why isn't it stickied here where people can see it? Or why wouldn't you link him to it so he can move there with ease?
Why should he go to that thread for a price appraisal? That's the whole purpose of this thread. We're not creating different threads for price checks on different items. That thread is for INFO on those caps, not price checks.
Also, IF the opinion of the staff is that there is another thread for price checks on different items, then why isn't it stickied here where people can see it? Or why wouldn't you link him to it so he can move there with ease?
If you really don't know what to ask for it, put it up for auction.
If you really don't know what to ask for it, put it up for auction.
Can we update this?
Full DSA Hyperfuse set?
what about IBM Model M 1391401 1990 &1996, good condition
Thanks :thumb:
what about IBM Model M 1391401 1990 &1996, good condition
Thanks :thumb:
$30-$40 tops, 401's are quite common
what about IBM Model M 1391401 1990 &1996, good condition
Thanks :thumb:
What are full sets of lasered Cherry PBT caps going for? Also, what would Cherry G81's be worth?
Depends on the G81 of course. If it has lasered caps then yeah.. pretty much nothing.
Depends on the G81 of course. If it has lasered caps then yeah.. pretty much nothing.
G81s are either the most expensive boards out there or the most inexpensive :)) :)) :))
This makes me sad. I have multiples of these... http://imgur.com/a/PMQQi
This makes me sad. I have multiples of these... http://imgur.com/a/PMQQi
The black one looks like doubleshots.
This makes me sad. I have multiples of these... http://imgur.com/a/PMQQi
The black one looks like doubleshots.
Due to the Print Screen/SysRq and Pause/Break caps, I would guess pad printed POM maybe? Or a mix of doubleshots and POM? Check out the right Control...it's got a different legend placement it appears.
I'll have to double check when I get home. If they were, what would I be looking at as far as worth?
This makes me sad. I have multiples of these... http://imgur.com/a/PMQQi
The black one looks like doubleshots.
Due to the Print Screen/SysRq and Pause/Break caps, I would guess pad printed POM maybe? Or a mix of doubleshots and POM? Check out the right Control...it's got a different legend placement it appears.
This makes me sad. I have multiples of these... http://imgur.com/a/PMQQi
The black one looks like doubleshots.
Due to the Print Screen/SysRq and Pause/Break caps, I would guess pad printed POM maybe? Or a mix of doubleshots and POM? Check out the right Control...it's got a different legend placement it appears.
The black ones are not doubleshots, look at the shift legends, the enter legend, the alphas and the arrows. and especially the Prt Sc/Pause :))
What's an MX Mini worth with an acrylic case and no keycaps? I have no clue.
What's an MX Mini worth with an acrylic case and no keycaps? I have no clue.
You can get a MX Mini PCB fairly easily nowadays. Acrylic cases aren't very expensive. Switches... I'd say about $150-175 would be a reasonable price.
What's an MX Mini worth with an acrylic case and no keycaps? I have no clue.
You can get a MX Mini PCB fairly easily nowadays. Acrylic cases aren't very expensive. Switches... I'd say about $150-175 would be a reasonable price.
Are you saying that including the switches?
I've got a hack orange click clack skull, any idea what it might be worth?
Wondering what something's worth, but not necessarily sure you want to sell it? Post here and people will let you know.I'll try to keep a running table of values as people ask and others answer.
I highly recommend you stay away from asking about CC key appraisals as they tend to be a bit controversial. If you really don't know what to ask for it, put it up for auction [on eBay]. Posts pertaining to them in this thread will likely be deleted. Thanks!
KEEPER OF THE FAITH EDIT: All inquiries into the current value of Clack Factory artisan keycaps should be directed to the Clack Valuaion (http://geekhack.org/index.php?topic=59608.0) thread.
Also, please try to be as detailed as possible in your description of the item(s) for which you are requesting a price check. It helps others to give you a more accurate value of the item in question.
ok thanks jd I'll put it on ebay
Is a model f terminal bigfoot even worth anything?
Is a model f terminal bigfoot even worth anything?
not really because nobody has figured out how to convert it to USB yet.
Yeah how is that model F controller going? It looked like they had already made someIs a model f terminal bigfoot even worth anything?
not really because nobody has figured out how to convert it to USB yet.
soontm
I just accidently got a model m 401 1992 for $34 without cable, I know I am stupid. Please tell me how bad I did make on this decision, plus I do need a cable for this and where is the best place to get those cable and how much does it worth?
I just accidently got a model m 401 1992 for $34 without cable, I know I am stupid. Please tell me how bad I did make on this decision, plus I do need a cable for this and where is the best place to get those cable and how much does it worth?
Thanks guys, again, I know I am stupid......
I just accidently got a model m 401 1992 for $34 without cable, I know I am stupid. Please tell me how bad I did make on this decision, plus I do need a cable for this and where is the best place to get those cable and how much does it worth?
Thanks guys, again, I know I am stupid......
I think somebody at dt is working on it but when there's xt's to use instead, there isn't much motivation to convert the bigfootBut the bigfoot is so, big
Thanks, I am thinking about buying the cable from unicomp - $15 plus 6 shipping (seems expensive), but I can also order some keycap in the same timeI just accidently got a model m 401 1992 for $34 without cable, I know I am stupid. Please tell me how bad I did make on this decision, plus I do need a cable for this and where is the best place to get those cable and how much does it worth?
Thanks guys, again, I know I am stupid......
I would say that $34 for a complete working 1391401 plus shipping is a good price, and if that is a shipped price, it is great!
If you have to replace a few caps it is less desirable, but still OK. A standard replacement cable usually goes for about $15 shipped, or if you want a really nice cable, this is it:
http://www.ebay.com/itm/BEIGE-USB-to-SDL-6-Pin-6ft-IBM-Lexmark-Unicomp-Model-M-Clicky-Keyboard-Cable-NEW-/271470078682?pt=LH_DefaultDomain_0&hash=item3f34e0aada
How much for a dolch pac keyboard in mint condition?
Really? Lucky you, I've seen going for a few hundred at the lowestHow much for a dolch pac keyboard in mint condition?
I paid $100 plus shipping for mine, but I got the whole PAC system. Not that I wanted anything but the keyboard.
That's what they were going for last I checked.
For Dolch G80-1813, $100-120 is average market price. It seems it's about 50/50 on getting the seller to sell only keyboard, more often than not for the same price as the whole PAC unit... but at least it half the shipping.
Price check for a 62g lubed/stickered vintage black QFR! No caps. No micro usb cable.
Price check for a 62g lubed/stickered vintage black QFR! No caps. No micro usb cable.
I'd say $50-60 shipped. Most people who get them replce the qfr caps anyway.Price check for a 62g lubed/stickered vintage black QFR! No caps. No micro usb cable.
I'd say $40-50 shipped tops. The lack of caps and cable hurt. The lubed, springs, and vintage are preference things that shouldn't factor in much, if at all, in price
I see. I see QFRs sell for $65 shipped all the time though, seems weird that a modded one would sell for less. I have the caps in storage unfortunately, guess I should wait to get back to school o.oPrice check for a 62g lubed/stickered vintage black QFR! No caps. No micro usb cable.
I'd say $40-50 shipped tops. The lack of caps and cable hurt. The lubed, springs, and vintage are preference things that shouldn't factor in much, if at all, in price
I see. I see QFRs sell for $65 shipped all the time though, seems weird that a modded one would sell for less. I have the caps in storage unfortunately, guess I should wait to get back to school o.oPrice check for a 62g lubed/stickered vintage black QFR! No caps. No micro usb cable.
I'd say $40-50 shipped tops. The lack of caps and cable hurt. The lubed, springs, and vintage are preference things that shouldn't factor in much, if at all, in price
Black KBT Race II with mx blues and white LEDs. Lnib with cable and keycap puller. Wondering how much I should ask for it!
$100 for a used keyboard that sells new for $120??
I'm looking for a set of GMK Olivettis. How much do they usually go for?
nopoo choc mini with black switches i bought from ~2011 essentially NIB bought it on impulse and been sitting in my closet ever since
Can I get price check on these please:
- NIB key caps from Dolch PAC
- Dolch moogle kit
- NIB key caps WoB alphas only
- NIB key caps WoB TKL with 1.25 mods (and the correct step on delete, end, pgdn which is rare as hell I suppose)
Can I get price check on these please:
- NIB key caps from Dolch PAC
- Dolch moogle kit
- NIB key caps WoB alphas only
- NIB key caps WoB TKL with 1.25 mods (and the correct step on delete, end, pgdn which is rare as hell I suppose)
Can I get price check on these please:
- NIB key caps from Dolch PAC
- Dolch moogle kit
- NIB key caps WoB alphas only
- NIB key caps WoB TKL with 1.25 mods (and the correct step on delete, end, pgdn which is rare as hell I suppose)
$100-$120
$20-30
$30
$60
Can I get price check on these please:
- NIB key caps from Dolch PAC
- Dolch moogle kit
- NIB key caps WoB alphas only
- NIB key caps WoB TKL with 1.25 mods (and the correct step on delete, end, pgdn which is rare as hell I suppose)
$100-$120
$20-30
$30
$60
weird, I was quoted the same price range for an entire NIB dolch PAC keyboard
Can I get price check on these please:
- NIB key caps from Dolch PAC
- Dolch moogle kit
- NIB key caps WoB alphas only
- NIB key caps WoB TKL with 1.25 mods (and the correct step on delete, end, pgdn which is rare as hell I suppose)
$100-$120
$20-30
$30
$60
weird, I was quoted the same price range for an entire NIB dolch PAC keyboard
Because honestly people only want the keyboard for the caps.
Yeah I mean the board itself is so nice and all you need is to modify the cable and you can enjoy vintage blues.
That's sad.
G80-1800LPCDE it's not worth that much true as those are not terribly popular but it is worth more than €5!Sorry, I overvalued it.
Just because some liquidator had a ton of them and sold them low to get rid of them doesn't mean that's all they are worth ever again. By that logic all G80-5000 should be like $50 since one sold for that cheap once.
What about a ibm ssk 1397681, I an looking to get one for my collection, how much would be a good deal for a used one?
Edit: also a ibm mexico m13.
Thanks!
$200 for ssk<$200 for a bolt modded, great condition one. Calavera has one at $190 shipped right now.
I just got some spring from him, great guy and his ssk is in great condition.$200 for ssk<$200 for a bolt modded, great condition one. Calavera has one at $190 shipped right now.
Closer to $150 for a non-bolt modded, good condition one.
just don't go to ebay, those auctions always end up more than its worthYeah, I know, I mean I am not in hurry now, just creating my wishlist and set the target price for that and I'll work on it slowly (In fact I dont have the money to buy it all now, haha)
just don't go to ebay, those auctions always end up more than its worthYeah, I know, I mean I am not in hurry now, just creating my wishlist and set the target price for that and I'll work on it slowly (In fact I dont have the money to buy it all now, haha)
Do you think this would be a fair trade:
A Like-new (with original packaging + accessories) White Realforce 87U with 45g switches and black printed keycaps + Lavendar WASD + Pink Caps Lock, Ctrl and Num lock keycaps
for
a like-new HHKB Pro2 with original packaging and blank white/gray caps?
I have a Realforce that I'm possible looking to trade soon. Thx!
A Realforce 88UB mint condition with red modifiers?
maybe I'll look for non-bolt if its not much different...
A slightly dented(at one corner) Duck Poker case without the plate?
A slightly dented(at one corner) Duck Poker case without the plate?
If it has the Poker Suite etched on the back, the complete set sold for $300. It included the case, red aluminum plate, brass weights and rubber pads. With a dent and a missing plate, maybe $250?
If the case is actually the Duckmini v1 (doesn't have poker suit or brass weights), you can buy those new from http://kbdu.com in silver, red and black for ~$300.
guys, any idea what this is, the front is just look like model m 101keys with no brand label, and how much does it worth you think?it says model m unicomp on the back
It seems like Unicomp to me but I am not sure.Show Image(http://)
Oh my bad, I was onyl looking at the label. My badguys, any idea what this is, the front is just look like model m 101keys with no brand label, and how much does it worth you think?it says model m unicomp on the back
It seems like Unicomp to me but I am not sure.Show Image(http://)
Oh my bad, I was onyl looking at the label. My badguys, any idea what this is, the front is just look like model m 101keys with no brand label, and how much does it worth you think?it says model m unicomp on the back
It seems like Unicomp to me but I am not sure.Show Image(http://)
What would be a reasonable price (not including shipping) to ask for Poker 2 mx blue (Black case, no backlight, thick pbt caps) used for few days?
Includes original packaging and accessories.
Yeah, they're about $116 shipped CONUS new, so used but in almost new conditon would be around $105 shipped at most.What would be a reasonable price (not including shipping) to ask for Poker 2 mx blue (Black case, no backlight, thick pbt caps) used for few days?
Includes original packaging and accessories.
Probably around $80-90. They've been on massdrop a couple times recently (and right now) for just over $100.
1k+ (Around 1100) blue switches sold as one lot.15-20 cents apiece
Hi guys,
I have Filco tenkeyless mx blue switch keyboard which I bought 3 years ago. It's in very good condition, just some key caps wore off. Any idea what can I sell it for in Europe (Netherlands)? Is it hard/easy to sell it? I payed 110Ł 3 years ago, so what can I expect now for it?
Cheers.
What's a Cherry G80-3700 numpad worth?condition?
New in box.What's a Cherry G80-3700 numpad worth?condition?
http://deskthority.net/for-sale-f55/cherry-g80-3700-hqaus-nib-mode-4-t7084.htmlYeah I know - I just wanted another point of reference before buying although the price seems fair.
Tin's selling them for $65+postage
tinnie's price is really goodhttp://deskthority.net/for-sale-f55/cherry-g80-3700-hqaus-nib-mode-4-t7084.htmlYeah I know - I just wanted another point of reference before buying although the price seems fair.
Tin's selling them for $65+postage
It's just hard to come by what other people sell them for.
http://deskthority.net/for-sale-f55/cherry-g80-3700-hqaus-nib-mode-4-t7084.html
Tin's selling them for $65+postage
tinnie's price is really goodhttp://deskthority.net/for-sale-f55/cherry-g80-3700-hqaus-nib-mode-4-t7084.htmlYeah I know - I just wanted another point of reference before buying although the price seems fair.
Tin's selling them for $65+postage
It's just hard to come by what other people sell them for.
I got a free gas mask keycap, not really sure what its worth. It is a translucent blue color.light blue or dark blue? Nonetheless, its $16, retail price
Price checks on these please. Found them earlier going through storage.
- Authentic Cherry G8x-3000Sxx dye subs in decent condition (B~B+ I'd say) except enter key. key caps only
- Authentic Cherry G8x-3000Sxx dye subs in decent condition (B~B+ I'd say) except enter key. key caps onlyA dyesub set without an enter key? Probably not a hell of a lot, since a replacement would be so hard to find.
- Mx switches (clears, blacks & browns)
How much would you all say this Jeep Cherokee is worth?Show Image(http://imganuncios.mitula.net/2003_jeep_grand_cherokee_100361339551750315.jpg)
Price checks on these please. Found them earlier going through storage.
- Mx switches (clears, blacks & browns)
- Authentic Cherry G8x-3000Sxx dye subs in decent condition (B~B+ I'd say) except enter key. key caps only
- NIB G80-1800HAU
ANSI layout. G81-3100SPBUS
How much would you all say this Jeep Cherokee is worth?Show Image(http://imganuncios.mitula.net/2003_jeep_grand_cherokee_100361339551750315.jpg)
Whatever the junkyard will pay you for it. :)
How much would you all say this Jeep Cherokee is worth?Show Image(http://imganuncios.mitula.net/2003_jeep_grand_cherokee_100361339551750315.jpg)
Whatever the junkyard will pay you for it. :)
Well, the local scrapper guy offered me $300 for it, but I think it's really worth $450. What would you say? Wanna trade it for some keyboards?
How much is a CM QFTK MX Green worth? Mint condition. Inclusive box and accessories.mint? $80
Great thanks. Will be selling it soon. And how much for a new RF 87U 45g? Think around $200?yea, 200
How much would a (black) stock case for poker II be worth?$20ish
Where would I be able to fine one?
Thanks
How much were the GMK Olivettis when they were still up for sale on Originative?
I was wondering how much would a MX CC candycorn? (white, red, yellow) and a Topre Ocktober fest would go for? Sorry for the question I just haven't been around the forums lately and I've had these laying around in one of my drawers unused.
I was wondering how much would a MX CC candycorn? (white, red, yellow) and a Topre Ocktober fest would go for? Sorry for the question I just haven't been around the forums lately and I've had these laying around in one of my drawers unused.
http://geekhack.org/index.php?topic=59608.0
Or, you can be nice and sell them at cost. After all, we know how CC feels about profiting off his work.
pc on a acrylic and aluminum mx mini?
How much are a set of Dyesub PBT RGB modifiers worth?Are those IMSTO 1.25? $25ishShow Image(http://i.imgur.com/Vj9SGAP.jpg)
I am not sure where I got them. Should be from a GB. They do look very similar.How much are a set of Dyesub PBT RGB modifiers worth?Are those IMSTO 1.25? $25ishShow Image(http://i.imgur.com/Vj9SGAP.jpg)
I would like to ask how much should I pay for a model M 122 keys (I think its a AT or XT version?). I know will need a teensy and some work on it. I'd like to make it as a project and have some practice for the wiring and maybe use it afterward. How much should I pay for this keyboard for my practice project?Got my M-122 (albeit a very dirty one) for $35 shipped. Probally overpaid, because unless you somehow got a ps/2 version (very rare, last one was $50 and sold a hour after I posted it to great finds) you need to make a soarers teensy converter, as it is terminal
Thanks guys
Umm...there is a ps/2 version for the M122!!!I would like to ask how much should I pay for a model M 122 keys (I think its a AT or XT version?). I know will need a teensy and some work on it. I'd like to make it as a project and have some practice for the wiring and maybe use it afterward. How much should I pay for this keyboard for my practice project?Got my M-122 (albeit a very dirty one) for $35 shipped. Probally overpaid, because unless you somehow got a ps/2 version (very rare, last one was $50 and sold a hour after I posted it to great finds) you need to make a soarers teensy converter, as it is terminal
Thanks guys
Yes there is. But its really rare.Umm...there is a ps/2 version for the M122!!!I would like to ask how much should I pay for a model M 122 keys (I think its a AT or XT version?). I know will need a teensy and some work on it. I'd like to make it as a project and have some practice for the wiring and maybe use it afterward. How much should I pay for this keyboard for my practice project?Got my M-122 (albeit a very dirty one) for $35 shipped. Probally overpaid, because unless you somehow got a ps/2 version (very rare, last one was $50 and sold a hour after I posted it to great finds) you need to make a soarers teensy converter, as it is terminal
Thanks guys
btw, may I ask what did you do with your M-122, did you just buy it as part of your collection, or you convert it to a modern PC keyboard with soarers?
I thought the F122 is much more expensive (like at least $80~100+)? why it's much better then the model M-122?
It is mainly because of the type feeling? (I just got a model m 401, and I think it should have a similar type feeling compare the M-122, I guess?)
I thought the F122 is much more expensive (like at least $80~100+)? why it's much better then the model M-122?
It is mainly because of the type feeling? (I just got a model m 401, and I think it should have a similar type feeling compare the M-122, I guess?)
F-122 is $100+
IMO M's feel very inferior to F's. M feels dull, and F feels springy and alive.
Also F doesn't require bolt mod, and the metal plate feels very good compared to plastic
Maybe I should save some money to get a model F instead of getting this M-122.....
I thought the F122 is much more expensive (like at least $80~100+)? why it's much better then the model M-122?
It is mainly because of the type feeling? (I just got a model m 401, and I think it should have a similar type feeling compare the M-122, I guess?)
F-122 is $100+
IMO M's feel very inferior to F's. M feels dull, and F feels springy and alive.
Also F doesn't require bolt mod, and the metal plate feels very good compared to plastic
by the time I was doing research on how to convert the M-122, I saw some of your awesome project in the past.Maybe I should save some money to get a model F instead of getting this M-122.....
The Model F-122 is triple the price of the M-122 and worth every penny. You may spend months finding one, as well.
Your patience will be rewarded.
Noob question: is there a keysaver version of the F with a usb compatible cable (assuming modded)?
I am not sure where I got them. Should be from a GB. They do look very similar.How much are a set of Dyesub PBT RGB modifiers worth?Are those IMSTO 1.25? $25ishShow Image(http://i.imgur.com/Vj9SGAP.jpg)
Noob question: is there a keysaver version of the F with a usb compatible cable (assuming modded)?
Not sure what "keysaver" means. The F AT is about the same size as an SSK. The rare and expensive Kishsaver may be smaller, I don't have one. There is an even more rare and expensive one that is narrow but has a double row of F keys at the top.
Soarer's Converter/Teensy outputs to USB in any case.
Noob question: is there a keysaver version of the F with a usb compatible cable (assuming modded)?
Not sure what "keysaver" means. The F AT is about the same size as an SSK. The rare and expensive Kishsaver may be smaller, I don't have one. There is an even more rare and expensive one that is narrow but has a double row of F keys at the top.
Soarer's Converter/Teensy outputs to USB in any case.
Maybe the wrong term. Is there a TKL model F?
You're right. Thanks. :)Those are from Ivan's Round 2 PBT Dyesubs:I am not sure where I got them. Should be from a GB. They do look very similar.How much are a set of Dyesub PBT RGB modifiers worth?Are those IMSTO 1.25? $25ishShow Image(http://i.imgur.com/Vj9SGAP.jpg)
http://geekhack.org/index.php?topic=43328.0
The GB price was 20$ so I'd say ~15$ depending on the condition of the caps.
Rosewill RK9000 with reds. Red plate, detachable USB.$60. Rosewill isn't very known for quality
There's the unsaver, which has no numpad, but has 2 columns of extra keys on the left, and 2 rows of function keys on top.
Rosewill isn't very known for quality
Rosewill isn't very known for quality
I thought that Rosewill was considered one of the best <$100 keyboards. I would never buy one because of the hideous logo, however.
Can you point out what is better about the CMs build quality, I don't own any of those two..CM build quality isn't that good, but it doesn't fail. Rosewill is known to fail, best example, the USB port
Can you point out what is better about the CMs build quality, I don't own any of those two..CM build quality isn't that good, but it doesn't fail. Rosewill is known to fail, best example, the USB port
Can you point out what is better about the CMs build quality, I don't own any of those two..CM build quality isn't that good, but it doesn't fail. Rosewill is known to fail, best example, the USB port
I would like to ask how much I should pay for a used Filco MJ2 Ninja with Cherry MX Red (UK layout), bought from Amazon.co.uk back in November 2012 (so, with 4 more months of warranty). The guy is asking 125€ for it shipped, and the keyboard has not been modified, it's all stock.It depends how much is the shipping cost. I think €100 or a bit less is a fair price.
Unused- ABS Double Shot (104/5)
-Dolch Theme
http://imgur.com/a/T1UbC
I would like to ask how much I should pay for a used Filco MJ2 Ninja with Cherry MX Red (UK layout), bought from Amazon.co.uk back in November 2012 (so, with 4 more months of warranty). The guy is asking 125€ for it shipped, and the keyboard has not been modified, it's all stock.It depends how much is the shipping cost. I think €100 or a bit less is a fair price.
€5 sounds really cheap for shipping a kb..I don't think thats right, thought it may be different where you live.I would like to ask how much I should pay for a used Filco MJ2 Ninja with Cherry MX Red (UK layout), bought from Amazon.co.uk back in November 2012 (so, with 4 more months of warranty). The guy is asking 125€ for it shipped, and the keyboard has not been modified, it's all stock.It depends how much is the shipping cost. I think €100 or a bit less is a fair price.
Thanks for your answer! The shipping cost is €5 or so. He's asking 120€ for the keyboard. I'll try then to bring that price down to 100€. If I'm not successful, I won't buy the Filco from him.
122 F and AT F
122 F and AT F
F-122's are going for around $100 now. AT F's are at around $125.
122 F and AT F
F-122's are going for around $100 now. AT F's are at around $125.
How much for jd?
€5 sounds really cheap for shipping a kb..I don't think thats right, thought it may be different where you live.I would like to ask how much I should pay for a used Filco MJ2 Ninja with Cherry MX Red (UK layout), bought from Amazon.co.uk back in November 2012 (so, with 4 more months of warranty). The guy is asking 125€ for it shipped, and the keyboard has not been modified, it's all stock.It depends how much is the shipping cost. I think €100 or a bit less is a fair price.
Thanks for your answer! The shipping cost is €5 or so. He's asking 120€ for the keyboard. I'll try then to bring that price down to 100€. If I'm not successful, I won't buy the Filco from him.
How much would you pay for 2 commodore 64 keyboards? It's only the keyboard, not the whole "computer", here is the link of one of them: http://www.subito.it/videogiochi/commodore-64-tastiera-marrone-ravenna-95397003.htm ...
(has anyone converted it to usb using teensy or something like that?)
QFR with 62g clears (also whats the best way to ship this. game board box?)
How much is the G80 1800 HAU for good condition?1800HAU can get quite expensive AFAIK, but something like my 1851LPMDE is almost for free in Germany.
I like the 1800 layout, and I would like to get one to use in the office, which G80-1800 is most common and cheapest?
Thanks!
Terminal M - 1395660 - Squeaky clean, looks NIB
Model F - 1801449 - Little bit of grime on caps, mostly clean
Model M - 1397661 - also very clean, have RGB mods for it
Model M rubberdome
Terminal M - 1395660 - Squeaky clean, looks NIB
Model F - 1801449 - Little bit of grime on caps, mostly clean
Model M - 1397661 - also very clean, have RGB mods for it
Model M rubberdome
May I ask how come most of your keyboard stabilisers are gone? :eek:It's only the 2100 that's really missing stabilisers - I had to steal them for my 360c. I have enough screw-stabilisers for the 1501, I've just lost the screwdriver needed to open it up so I can't install them myself :))
How much should I offer for a "gate array" Wyse terminal keyboard? It looks a bit gray, maybe dirty, but probably not yellowed. Cherry MX Black switches. Mostly US ISO doubleshots with original texture, only some keys are blank and a few (not alphas) feel smoother. How much just for the keycaps?
wondering how much SP DCS Graphite set will go for
http://i.imgur.com/Ez8nLAA.jpg
How much are vintage cherry mx blacks worth? on a new old stock keyboard or on a used keyboard. How much would they be worth if properly removed from the keyboard?30 cents iirc
also values for any of the keys on this, they are on cherry mx blacks
How much are vintage cherry mx blacks worth? on a new old stock keyboard or on a used keyboard. How much would they be worth if properly removed from the keyboard?The keyboard looks like yet another "gate array" Wyse terminal keyboard. I haven't seen a black one yet though. Please, post more/better pictures in some other subforum or at Deskthority—for future reference, or "keyboard science" if you like.
also values for any of the keys on this, they are on cherry mx blacks
Two questions:
- Is $90 reasonable for an aluminum 60% Tex case?
- Is $30 reasonable for one of The_Beast's stainless steel 60% plates?
Two questions:
- Is $90 reasonable for an aluminum 60% Tex case?
- Is $30 reasonable for one of The_Beast's stainless steel 60% plates?
Two questions:
- Is $90 reasonable for an aluminum 60% Tex case?
- Is $30 reasonable for one of The_Beast's stainless steel 60% plates?
What should I expect to get for a 1991 model M keyboard.
Chicony KB-5181Depends on switches and condition. Generally perhaps around $30, montereys more.
Has montereys, pretty good conditionChicony KB-5181Depends on switches and condition. Generally perhaps around $30, montereys more.
Has montereys, pretty good condition
Ah good, I got it for $40 shippedHas montereys, pretty good condition
That is a great item that everyone should try, at least. I have one in my "permanent collection" .....
$30-40 + shipping is a fair price for a nice one.
What would you say a HO mx Clack goes for these days? Haven't been dealing with clacks for ages.
Wondering what these are worth so I can add them to my sale thread, thanks.
1. Pentium Dual Core E5300 - 2.6Ghz. I also have the stock oem cooler with the big funnel if anyone is interested. Came from an e-machine. Never overclocked.
2. Acer G43-AM 775 mobo. e-machine oem board. Board was getting to bios, but machine had a failing psu. Could not test past there.
3. 2x2gb DDR2 800 - matched set. 1.8v.
4. 2x1gb DDR2 800 - matched set. 1.8v.Show Image(http://www.overclock.net/image/id/8913894/width/900/height/900/flags/LL)
Can I get an insight into how much my Happy Hacking Professional 2 - Blank (Dark Gray) lubed and dental band modded is worth now? I would say it's had fairly low usage since I got my RF 87u a short while after the hhkb.
Could I ask $200 for it, or is that too steep for a modded board? Problem is that shipping is quite expensive from Norway, so it might not even be worth selling.
Wondering what these are worth so I can add them to my sale thread, thanks.
1. Pentium Dual Core E5300 - 2.6Ghz. I also have the stock oem cooler with the big funnel if anyone is interested. Came from an e-machine. Never overclocked.
2. Acer G43-AM 775 mobo. e-machine oem board. Board was getting to bios, but machine had a failing psu. Could not test past there.
3. 2x2gb DDR2 800 - matched set. 1.8v.
4. 2x1gb DDR2 800 - matched set. 1.8v.Show Image(http://www.overclock.net/image/id/8913894/width/900/height/900/flags/LL)
Personally I would try to sell that as a bundle for about $40-45. Would be a decent base for a NAS or something. Otherwise the E5300 is worth about $8, motherboard worth maybe $10, DDR2 2x2 $20, DDR2 2x1 $10.
Can I get an insight into how much my Happy Hacking Professional 2 - Blank (Dark Gray) lubed and dental band modded is worth now? I would say it's had fairly low usage since I got my RF 87u a short while after the hhkb.
Could I ask $200 for it, or is that too steep for a modded board? Problem is that shipping is quite expensive from Norway, so it might not even be worth selling.
I think it's worth $200, but yes, if shipping is $40 or $50 then you might have a hard time selling. Maybe try selling it on Deskthority to someone else in EU?
Can I get an insight into how much my Happy Hacking Professional 2 - Blank (Dark Gray) lubed and dental band modded is worth now? I would say it's had fairly low usage since I got my RF 87u a short while after the hhkb.
Could I ask $200 for it, or is that too steep for a modded board? Problem is that shipping is quite expensive from Norway, so it might not even be worth selling.
How much is a regular 3ds with an Ambassador certificate program Plus a digitial copy of Fire Emblem Awakening worth?
How much would it be worth without the ambassador certificate program?
Condition is somewhere between very good and like new...
Thanks
What did the valentine GB extras cost? I just want to sell them for what I got them for but I totally forgot
wow, now I just feel silly :p thnxWhat did the valentine GB extras cost? I just want to sell them for what I got them for but I totally forgot
GB prices are here I think -> http://geekhack.org/index.php?topic=49198.msg1061450#msg1061450
How much these 2 Topre keycaps sets are worth?Show Image(http://i.imgur.com/Zj9EFJL.jpg)Show Image(http://i.imgur.com/llIYfyg.jpg)
110 Mx Clears
QFR with clears, painted case ( includes stock case ), stock key caps ( new, never used ) and white abs blank keycaps
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_0518_zpsf326ec86.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_0518_zpsf326ec86.jpg.html)
How much these 2 Topre keycaps sets are worth?Show Image(http://i.imgur.com/Zj9EFJL.jpg)Show Image(http://i.imgur.com/llIYfyg.jpg)
What is the going rate for:
Miami alpha set?
Miami mod set?
Thanks! :)
What is the going rate for:
Miami alpha set?
Miami mod set?
Thanks! :)
Condition?
I just bought a set of like-new Miami (Alphas + Mods + Tsangan + GH Pack) for just about GB price ($110).
If they're like new, you could probably get $75 or so, plus shipping, cheaper if worse condition.
$90 if they aren't shiny.
What would:
- A new in box Apple Extended Keyboard II be worth?
- A used and yellowed Apple Extended Keyboard be worth?
Price check: NIB poker 2 with stock cherry mx clears
What is price of a Unicomp Model M 122?
Would y'all call $180 for a gently used silent Realforce 87u a good price?
P/C Poker II with ergo clears and a grey mkc aluminum case, few months old, no signs of wear, original pbt caps.150ish is my guess
P/C Poker II with ergo clears and a grey mkc aluminum case, few months old, no signs of wear, original pbt caps.150ish is my guess
How much these 2 Topre keycaps sets are worth?Gimme gimme gimme! :DShow Image(http://i.imgur.com/Zj9EFJL.jpg)Show Image(http://i.imgur.com/llIYfyg.jpg)
I bought these clacks back in 2012, I haven't been on geekhack since then but I am not that interested in custom keycaps anymore and these are just sitting in my desk drawer so I figured I should sell them, but I have no clue what I'd get for them.
I believe the pink is "octopink" but it is slightly faded due to light exposure
The green is mint gum/mint green I think
The grey I am unsure of, it was included as a third extra key with no specific name
They also came in a nice little string draw sack
(http://i.imgur.com/RA0FTBN.jpg) (http://imgur.com/RA0FTBN)
The Clack valuation thread (http://geekhack.org/index.php?topic=59608.180) is the best place to ask.
how much for this set of thick Dyesubs? Thanks!Show Image(http://i.imgur.com/Ix2bLsp.jpg)
i know it's not about price gouging, but may i ask how long it takes to approve a sale thread around here please? it's been more than 24 hours since i submitted and i got no feedback from the mods, nor an approval, so i don't even know if something's wrong with my submission :X
how much for this set of thick Dyesubs? Thanks!Show Image(http://i.imgur.com/Ix2bLsp.jpg)
What would they fit on?
How much could I get for this keyboard?Show Image(http://i.imgur.com/CBtxLb1.jpg)
It's a Filco MJ2 TKL with custom paint, MX clear spacebar, and MX browns everywhere else. Billiard caps on the function keys and a custom WASD escape key. I don't know for sure if I have the original function and escape caps, but for the purposes of valuation, assume I don't. Original box included.
Thanks.
i know it's not about price gouging, but may i ask how long it takes to approve a sale thread around here please? it's been more than 24 hours since i submitted and i got no feedback from the mods, nor an approval, so i don't even know if something's wrong with my submission :X
I can't see a thread from you that's awaiting approval. If it gets to be too long, you can always PM a moderator that's online. That will bring it to our immediate attention and it will be dealt with much quicker.
And speaking generally, if you're awaiting approval for quite some time, you might want to review the classifieds rules. That's (obviously) most likely the reason. Be sure to include the proper photos and a price, and it's usually super quick.
Is this Logitech trackman marble worth anything? Its been sitting unused in my closet for the past 10years.Show Image(http://img.tapatalk.com/d/14/08/06/qyra2ahe.jpg)
how much for this set of thick Dyesubs? Thanks!Show Image(http://i.imgur.com/Ix2bLsp.jpg)
Hi,There isn't much interest in these, unfortunately. I'd say a bit less than new a G80-3000, i.e. say €40, and hope.
I have a G80-11900 New-in-box (ISO layout DE) that I'm interested to sell, how much it worth?Show Image(http://s10.postimg.org/eflvpa595/IMG_20140805_161230.jpg)
thanks in advance :thumb:
sticky says 25 posts and 2 months to start a thread in classified, but i still seem unable to start a threadProb have to wait for approval, that is necessary on classifieds posts now afaik.
odd, i mean if you look at my post history ive already made sales and purchases in classified already. I'm assuming new policy?sticky says 25 posts and 2 months to start a thread in classified, but i still seem unable to start a threadProb have to wait for approval, that is necessary on classifieds posts now afaik.
odd, i mean if you look at my post history ive already made sales and purchases in classified already. I'm assuming new policy?sticky says 25 posts and 2 months to start a thread in classified, but i still seem unable to start a threadProb have to wait for approval, that is necessary on classifieds posts now afaik.
It appears to be affecting other users as well.
I want to know how much this silver Hammer case is.Show Image(http://i.imgur.com/bvD8rK1.jpeg)Show Image(http://i.imgur.com/UX7RS5I.jpeg)Show Image(http://i.imgur.com/vVSV5WG.jpeg)
I want to know how much this silver Hammer case is.Show Image(http://i.imgur.com/bvD8rK1.jpeg)Show Image(http://i.imgur.com/UX7RS5I.jpeg)Show Image(http://i.imgur.com/vVSV5WG.jpeg)
What would a good condition (read: case is in great shape, but space bar is somewhat yellowed) M0116 with salmon ALPS be worth with an included stock ADB cable be worth?
Huh, weird. I thought the salmon were preferable. I guess it's all opinion, eh?What would a good condition (read: case is in great shape, but space bar is somewhat yellowed) M0116 with salmon ALPS be worth with an included stock ADB cable be worth?
$20-40. It really depends on the day and if someone is willing to pay the higher price. I've seen tons of good ones go on eBay for $20-30. That and Salmon Alps aren't as good as Orange Alps supposedly, so I would say toward the lower end of the spectrum.
Huh, weird. I thought the salmon were preferable. I guess it's all opinion, eh?
see: clack valuation thread
Hey guys. How much do topre fn caps go for? binge or cc, or even new bb ones. In particular oktobrefest/drunken ones :)
Might be parting with some keyboards when I get back from my internship to save up for a stupidly expensive gaming laptop..
I have:
LZ-GH black
356pad Titanium
356cl DGE
Mochi Blank CC
BMX CC (mx) red/yellow on blue
How much would these run these days? Or has the korean custom craze died out. (It's been like 5 months since I've been connected)
Might be parting with some keyboards when I get back from my internship to save up for a stupidly expensive gaming laptop..
I have:
LZ-GH black
356pad Titanium
Possibles: (valuation is shaky)
356cl DGE
Mochi Blank CC
BMX CC (mx)
How much would these run these days? Or has the korean custom craze died out. (It's been like 5 months since I've been connected)
Might be parting with some keyboards when I get back from my internship to save up for a stupidly expensive gaming laptop..Really hard to price check the DGE since one never sold here. You could get a big wad of cash for it though :)) You could probably get a bigger wad if you sold it to china though.
I have:
LZ-GH black
356pad Titanium
Possibles: (valuation is shaky)
356cl DGE
Mochi Blank CC
BMX CC (mx)
How much would these run these days? Or has the korean custom craze died out. (It's been like 5 months since I've been connected)
Whats the market price of a GMK 7u spacebarShow Image(http://i.imgur.com/Qv5yMiB.jpg)
The orange and pink one.
Thank you.
Show Image(http://www.xtremequips.com/wp-content/uploads/2009/10/imageslarge_2Dbanana_2Dor_2Dsmall_2Dkeyboard_2D500x357.jpg)
Perfect condition Kinesis Advantage, no manual and don't have the plastic wrap it came in (have both inner and outer boxes though). How much do they usually go for around here and would it be unreasonable to try and trade for an hhkb.
(Attachment Link) (Attachment Link)
I've got a few boards I would liked judged by the community so I can sell them for a fair price to everyone. I am looking to be rid of all of them (despite my undying love for them all). These puppies need a good home where they'll be used and cherished, because what you love the most you set free.
Ducky DK9087G2 PRO TKL White Blank PBT Keyset
DAS Keyboard 2 (With beaten and battered original box, all keycaps in prestine condition although because I popped the keys out the stabilizers need to be put back into place, everything works perfectly)
IBM Model M (Silver, Grey, and Blue labels)
IBM Model M-13 (Black)
Dell AT101W (Beige)
IBM Model F AT
Mediatek White ALPS Full-size
Chicony KB-5181 w/ Monterey Blues
SIIG Minitouch w/ what I believe are ivory Hua-Jie AK-CN2 ALPS clones & one key where the stem ripped out into the key-switch, however a pair of needle-nose pliers should do the trick there. you'll also need a replacement for that key, which i believe is delete
Thanks in advance guys, I'll be creating a thread to sell all of these once I get some input from you all. Much love <3
What's the price of a translucent gas mask keycap that people usually sell them at?
What's the price of a translucent gas mask keycap that people usually sell them at?
$25-40.
What's the price of a translucent gas mask keycap that people usually sell them at?
$25-40.
What's the price of a brobot?
Retail price or whatever you paid for it, Bro Caps doesn't like people profiting off his work.What's the price of a translucent gas mask keycap that people usually sell them at?
$25-40.
What's the price of a brobot?
Julysicle MX. How much is it worth? Hardly used and it's stamped too.
How much should I sell my stock plastic white poker 2 case for? No rubber feet
Thanks :thumb:How much should I sell my stock plastic white poker 2 case for? No rubber feet
Well, I paid $25 for mine, although it was black and had rubber feet. So maybe $20.
Might be parting with some keyboards when I get back from my internship to save up for a stupidly expensive gaming laptop..
I have:
LZ-GH black
356pad Titanium
Possibles: (valuation is shaky)
356cl DGE
Mochi Blank CC
BMX CC (mx)
How much would these run these days? Or has the korean custom craze died out. (It's been like 5 months since I've been connected)
As for the DGE, the usual (Chinese) going rate for an assembled one would be ~$1300±50.
As for the DGE, the usual (Chinese) going rate for an assembled one would be ~$1300±50.
Dear christ.
Do you have a link to a sale for one? That seems absolutely ridiculous. At first I thought you meant 1300 yuan but that would only be $211...
Might be parting with some keyboards when I get back from my internship to save up for a stupidly expensive gaming laptop..
I have:
LZ-GH black
356pad Titanium
Possibles: (valuation is shaky)
356cl DGE
Mochi Blank CC
BMX CC (mx)
How much would these run these days? Or has the korean custom craze died out. (It's been like 5 months since I've been connected)
Can't say much about the LZ, but Tsangan sold his 356pad with blank zinc caps for $400 + shipping (http://geekhack.org/index.php?topic=43838.0;nowap) (obv not gb price).
As for the DGE, the usual (Chinese) going rate for an assembled one would be ~$1300±50.
Don't know sh*t about CC prices, can't help you there either.
I'm going to be posting my KUL ES-87 with mx reds in classifieds soon. It's had very light use over a couple weeks (maybe 7 hours used total) and comes with the box and all accessories included per normal. I paid $120 for it, what would be a fair price to put it up for sale as, I was thinking maybe $100.
I have a December 1993 IBM Model M
Made in USA
Great condition, all keys working and present. It was cleaned up so there isn't much dirt and it's not very discolored either.
Has the PS/2 connector.
Any ideas on pricing? (I don't enjoy heavy switches so I haven't been enjoying this at all. Not to mention I prefer TKL so the sheer size is already a turn off)
Probably around $40 + shipping, assuming that it's a 1391401.
Probably around $40 + shipping, assuming that it's a 1391401.
Maybe $50+ if it is IBM-branded. It has got to be a blue label, right? Removable cable?
Not removable cable though
this old teleperm keyboard something worth? ... no matter, I hammer to the wallShow Image(http://i.imgur.com/dZyNTBZ.jpg)
this old teleperm keyboard something worth? ... no matter, I hammer to the wallShow Image(http://i.imgur.com/dZyNTBZ.jpg)
MX Blacks, right? I haven't seen one sell, so I can't give a price range. I do know some of the other smaller MX Black Seimens have sold for around $50-90 on eBay.
I have a Red Alert 2.0 base keyset red on white (full tkl set), as well as white on red modifiers. What are those going for these days?
Note: TKL base set, do NOT have any numkeys
I have a Red Alert 2.0 base keyset red on white (full tkl set), as well as white on red modifiers. What are those going for these days?
Note: TKL base set, do NOT have any numkeys
The original Korean ones? Or the ones that Ragnorock or tjcaustin ran here?
I have a Red Alert 2.0 base keyset red on white (full tkl set), as well as white on red modifiers. What are those going for these days?
Note: TKL base set, do NOT have any numkeys
The original Korean ones? Or the ones that Ragnorock or tjcaustin ran here?
The ones from tjcaustin, yes that'd be correct. My bad. Should be called the Klaxon set I believe. Reference link here (http://geekhack.org/index.php?topic=37225.0)
I have an opportunity to buy a crapton of terminal Model Ms from a local e-cycler. Is there any market for them? Anyone here want a bunch of terminal Ms? :p
I have an opportunity to buy a crapton of terminal Model Ms from a local e-cycler. Is there any market for them? Anyone here want a bunch of terminal Ms? :p
I'm still really jelly of that board nubs
I have an opportunity to buy a crapton of terminal Model Ms from a local e-cycler. Is there any market for them? Anyone here want a bunch of terminal Ms? :p
YES
people will always want model Ms
I have an opportunity to buy a crapton of terminal Model Ms from a local e-cycler. Is there any market for them? Anyone here want a bunch of terminal Ms? :p
Are they one piece caps? I'd take one just for the caps and replacement parts for my AT&T buckling spring.
KBT Pure with stock keycaps and MX blues, second owner? Trying to flip one I picked up on eBay since I don't like the layout... Wondering if I paid too much and should lower my ask.
Round about what could I ask for a G80-8113 with MX clears and lasered caps? It's ISO, sadly.
Thanks!Round about what could I ask for a G80-8113 with MX clears and lasered caps? It's ISO, sadly.
These something like $30-40 as most people will only want them for switches or to practice soldering and etc on.
What's the going rate on early NIB SSK and used but like new SSK?
How much will a 1 month old pretty much like new 87U 55g with white caps on black worth?Will there be a lot of reduction compare to the original price?
How much will a 1 month old pretty much like new 87U 55g with white caps on black worth?Will there be a lot of reduction compare to the original price?
White caps on black isn't a retail combination– people will pay a bit more for it. Assuming you have the box and everything it came with, I'd say you could get $200 + shipping for it. (Which is close to retail.)
How much will a 1 month old pretty much like new 87U 55g with white caps on black worth?Will there be a lot of reduction compare to the original price?
White caps on black isn't a retail combination– people will pay a bit more for it. Assuming you have the box and everything it came with, I'd say you could get $200 + shipping for it. (Which is close to retail.)
That's a really good news. If I were to keep the board for ~2 months, how much approximately will the price drop assuming the condition is still perfect?
I have a couple of older devices
Both are 3, maybe 4 years old.
I'm planning to mod my HHKB using the 87U 55g springs and will have a mix of 45g and 55g 87U black(with white grey caps if it matters). I would like to know what is the most suitable price for the mix weight of 87U? Obviously it will decrease by a lot but I'm not sure how much.
I'm planning to mod my HHKB using the 87U 55g springs and will have a mix of 45g and 55g 87U black(with white grey caps if it matters). I would like to know what is the most suitable price for the mix weight of 87U? Obviously it will decrease by a lot but I'm not sure how much.
The springs aren't what makes it 55g, it is the rubber domes.
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.Someone's going to tell you to post in the clack valuation thread instead in just a few moments. I guarantee it :))
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
Someone's going to tell you to post in the clack valuation thread instead in just a few moments. I guarantee it :))
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
I'll trade ya a hug for the whole lot.
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
I'll trade ya a hug for the whole lot.
Deal! Hoff now owns them all.
Thanks for playing!
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
I'll trade ya a hug for the whole lot.
Deal! Hoff now owns them all.
Thanks for playing!
Wait!
What if I traded you two hugs?
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
I'll trade ya a hug for the whole lot.
Deal! Hoff now owns them all.
Thanks for playing!
Wait!
What if I traded you two hugs?
What is this, an auction?
Show Image(http://img.tapatalk.com/d/14/09/06/4yvebuqa.jpg)
What are these worth? The top rows are mx, bottom several are topre. NM condition, barely handled.
I'll trade ya a hug for the whole lot.
Deal! Hoff now owns them all.
Thanks for playing!
Wait!
What if I traded you two hugs?
What is this, an auction?
It's a counteroffer, duh
Unopened Gigabyte R9 280x graphics card?
May I know how much did a coffee set worth? I have the tkl set with tsangan kit
PriceCheck:
PokerX
Mx Reds, with 80g springs ( feels slightly heavier than stock blacks )
white poker2 plate
stock black pokerx case.
stock blakc pokerx caps, new.
Here is the kicker, the board is half hand wired, and probably wouldn't survive being dismantled one more time.
Though It fully works, led's and all, no issues.
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_3422_zps195f04bd.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_3422_zps195f04bd.jpg.html)
This pic pretty much shows all the wiring that had to be done to get it to work.
( case would not be included with sale )
PriceCheck:
PokerX
Mx Reds, with 80g springs ( feels slightly heavier than stock blacks )
white poker2 plate
stock black pokerx case.
stock blakc pokerx caps, new.
Here is the kicker, the board is half hand wired, and probably wouldn't survive being dismantled one more time.
Though It fully works, led's and all, no issues.
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_3422_zps195f04bd.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_3422_zps195f04bd.jpg.html)
This pic pretty much shows all the wiring that had to be done to get it to work.
( case would not be included with sale )
Hmmm. That's a hard one.
If it were in good condition, I would think that you could get $90 - $100. Given all the jumpers, I think you could get something like $50 - $75? The case is worth $20, the switches another $20 and you could probably get $10 for the plate, so price it for $60 and it should sell.
no case included :(
Hi everyone; I have a couple of older devices and want to get an idea of price before I post them for sale.
fkbn87m/eb filco tenkeyless with browns. I think this is an 'original' majestouch. It was used for a day or two before I decided to go with a fullsized board. No glossy keys or anything like that. Comes with keypuller, ps2 adapter, and red WASD keys.
fkb22mb filco numberpad. It was literally never used, but I cannot find the box anywhere.
Both are 3, maybe 4 years old.
Thanks all
MJ2s in great condition go for about €100 or slightly less in EU, from what I've observed so far.
Asked before but no reply, so I'm gonna try again. How much would a 1 or 2 month old Realforce 87U with mix 45g+55g worth? It's basically a donor keyboard for my HHKB mod.
I have this DATATECH SPK-100 that I put up on eBay. It looks to be Blue ALPS.
http://imgur.com/a/gyg3P
What can I expect for this?
What would a used black Filco Majestouch 2 be worth?
About 3 years of use, 108 keys, non-ninja version, with a red ESC key and the WASD keycaps have been replace with yellow ones. I don't have the original keycaps.
Most of the letter keys are a bit shiny, but all the keys work fine.
price check :
Lightsaver v2, 62g mx red switch, full led:
http://imgur.com/a/8CLqQ
price check :
Lightsaver v2, 62g mx red switch, full led:
http://imgur.com/a/8CLqQ
Sell it to taylordcraig!!
http://geekhack.org/index.php?topic=56877.msg1442833#msg1442833
Topre blank any color. don't have one but if I was looking to buy how much would I expect to pay?
Topre blank any color. don't have one but if I was looking to buy how much would I expect to pay?
I paid $150 for my pink blanks a few months ago. Pink took a while to sell out on EK back when production ended, and I think they were even down to $60 at one point, so I wouldn't be surprised to see other colors go for $200 or more. They almost never come up for sale, though.
Topre blank any color. don't have one but if I was looking to buy how much would I expect to pay?
I paid $150 for my pink blanks a few months ago. Pink took a while to sell out on EK back when production ended, and I think they were even down to $60 at one point, so I wouldn't be surprised to see other colors go for $200 or more. They almost never come up for sale, though.
Single cap or whole set?
It's alright. That's pretty much what I was expecting for a set.Topre blank any color. don't have one but if I was looking to buy how much would I expect to pay?
I paid $150 for my pink blanks a few months ago. Pink took a while to sell out on EK back when production ended, and I think they were even down to $60 at one point, so I wouldn't be surprised to see other colors go for $200 or more. They almost never come up for sale, though.
Single cap or whole set?
Whole set, sorry, I thought that's what you meant. One would probably go for $5ish.
Having trouble selling my Filco limited Yellow 104. I'm asking $135 (paied $160 off Amazon,) which I thought was fair.
I mean, the board is rare enough I've never seen one in the classifieds, and it's well done with manufacturing so you'd think it would sell but it's been almost 2 months. Is it because people don't like MX browns, or should I lower the price even more?
Pls help me price these items, specifically the novelty caps in the lower left corner:Show Image(http://tapatalk.imageshack.com/v2/14/09/27/3bd669af8812b01583fc4ab7e968ae49.jpg)
I was thinking $2.50 per cap for rows 3&4 (they are $3.25 new), but what about rows 1 & 2?
Also, the pictured Warmaster and Armor...are they worth any more than the original price?
Lastly, the Techkeys business cards assembled with MX Blues... Maybe $12 each?
Please let me know what you think, just trying to be fair with my pricing. Thanks!
Pls help me price these items, specifically the novelty caps in the lower left corner:Show Image(http://tapatalk.imageshack.com/v2/14/09/27/3bd669af8812b01583fc4ab7e968ae49.jpg)
I was thinking $2.50 per cap for rows 3&4 (they are $3.25 new), but what about rows 1 & 2?
Also, the pictured Warmaster and Armor...are they worth any more than the original price?
Lastly, the Techkeys business cards assembled with MX Blues... Maybe $12 each?
Please let me know what you think, just trying to be fair with my pricing. Thanks!
For the novelty caps, are rows 1and 2 the top two rows? If so, you can check my thread for the yellow awesome face caps. I think I sold a few at $5 a piece or so but I can't remember and I'm on mobile. :(
$9 CMY, single $3.I should have known the maker would know. ;P
price check :
Lightsaver v2, 62g mx red switch, full led:
http://imgur.com/a/8CLqQ
IBM Model M Version 1394312 1994-12-12, I might have a deal for 35€ + shipping.
That would be high in the US, although cheaper than a new Unicomp.
Do you really want the 122 layout?
If you already have a Soarer's/Teensy that makes it easier.I have none of those , what is necessary to make it works with a mordern computer ?
Shiny Cherry DS set probably something like $15-30 depending on how shiny.
Model M 1394946 industrial? Works fine, just some surface scuffs and such.
These blank RGBs?Show Image(http://f.cl.ly/items/3h2Q123l112h1R0K3X3A/IMG_20141002_144553.jpg)
when will I be able to create a thread in classifieds?
Back to the rules I go. I will read more carefully this time.when will I be able to create a thread in classifieds?
Reading the classifieds rules would be a good start.
Model M 1394946 industrial? Works fine, just some surface scuffs and such.
I'd guess around $250.
How much is a 3 year old 16gb black iphone 4s with scratches through Sprint (American company) worth?
How much is it worth with a cracked back and how much is it worth without?
How much would the same phone be worth if it is just 1 year old and in almost new condition?
Hey guys I think I posted a reply before but I don't see it so I apologise if it does appear to youI would have to say at most 40-50USD
Anyway looking to sell my Razer Blackwidow Ultimate 2012 (blue). Yeah I know noob keyboard, but it is my very first one and I have to say, it's much better than a rubber dome keyboard. However I am looking to upgrade to a Ducky Shine 3 TKL, so how much would be a reasonable asking price for my BW? I just have to clean off the fingerprints and it'd be spick and span clean again.
How much is a 3 year old 16gb black iphone 4s with scratches through Sprint (American company) worth?
How much is it worth with a cracked back and how much is it worth without?
How much would the same phone be worth if it is just 1 year old and in almost new condition?
call sprint and have it factory unlocked, you only need to supply them the imei code and often if your contract is up they'll do it for free.
then a 4s is worth about ~150usd, 200 for the newer one.
source: just went new phone shopping and settled on an unlocked 4s with cracked back for $150.
how much is the OTD 356CL?
how much is the OTD 356CL?Might aswell be ∞ since you'll never find anyone willing to sell it :))
:eek: waiting all the timehow much is the OTD 356CL?Might aswell be ∞ since you'll never find anyone willing to sell it :))
what is a set of miami keycaps worth, looking for a set, but have no point of reference on price.
Alphas - $35
Mods - $40
ISO - $15
tsangan - $22
Numpad - $20
GH 2 Key Pack - $5
Shipping is $7.50 to US and UK and EU, $15 for everywhere else
Why'd you ask since I helped you buy one? :O:eek: waiting all the timehow much is the OTD 356CL?Might aswell be ∞ since you'll never find anyone willing to sell it :))
How much is a 3 year old 16gb black iphone 4s with scratches through Sprint (American company) worth?
How much is it worth with a cracked back and how much is it worth without?
How much would the same phone be worth if it is just 1 year old and in almost new condition?
call sprint and have it factory unlocked, you only need to supply them the imei code and often if your contract is up they'll do it for free.
then a 4s is worth about ~150usd, 200 for the newer one.
source: just went new phone shopping and settled on an unlocked 4s with cracked back for $150.
Thanks. The used one is unlocked, but I need to unlock the newer one. Do you know if I can do that if I'm no longer their customer?
what is a set of miami keycaps worth, looking for a set, but have no point of reference on price.
Group buy prices wereQuote from: http://geekhack.org/index.php?topic=46057.msg968001#msg968001Alphas - $35
Mods - $40
ISO - $15
tsangan - $22
Numpad - $20
GH 2 Key Pack - $5
Shipping is $7.50 to US and UK and EU, $15 for everywhere else
I've bought Miami from Hoffman at cost nearly a year after the GB, at cost + shipping; then I sold it for the same amount. People making money on it are meanie heads.
That said, it might be the only way to get it if you get an offer. If they're trying to gouge you, refer them to this post:
Shame on you elder Geek Hacker, if you're done with DCS/ABS/SP/Teal/Pink/Miami just pass it on, cover your shipping but don't make money.
I've bought Miami from Hoffman at cost nearly a year after the GB, at cost + shipping; then I sold it for the same amount. People making money on it are meanie heads.
That said, it might be the only way to get it if you get an offer. If they're trying to gouge you, refer them to this post:
Shame on you elder Geek Hacker, if you're done with DCS/ABS/SP/Teal/Pink/Miami just pass it on, cover your shipping but don't make money.
Agreed. I sold Miami at cost and CCnG at cost or a little below. I'm not a fan of selling sets at inflated prices, especially used sets.
Thank you kind gentlemen, I was worried that their was going to be a hefty markup.
Biggest problem with that of course is if a set switches hands often. If everyone is trying to cover their shipping costs it will increase each time... Anyway I agree on the no/little markup rule. It leaves a bit of a foul taste anyway.I've bought Miami from Hoffman at cost nearly a year after the GB, at cost + shipping; then I sold it for the same amount. People making money on it are meanie heads.Agreed. I sold Miami at cost and CCnG at cost or a little below. I'm not a fan of selling sets at inflated prices, especially used sets.
That said, it might be the only way to get it if you get an offer. If they're trying to gouge you, refer them to this post:
Shame on you elder Geek Hacker, if you're done with DCS/ABS/SP/Teal/Pink/Miami just pass it on, cover your shipping but don't make money.
There are even rumours of a GMK Miami buy. :PThank you kind gentlemen, I was worried that their was going to be a hefty markup.Also there are rumours of a miami r2 mini buy I think.
Thank you kind gentlemen, I was worried that their was going to be a hefty markup.
Also there are rumours of a miami r2 mini buy I think.
Thank you kind gentlemen, I was worried that their was going to be a hefty markup.
Also there are rumours of a miami r2 mini buy I think.
I think it was confirmed in one of the ctrl alt threads. :)
I am not looking for prices to sell, but to buy since there is no other place I know that can answer this question/no other thread. How much should I be preparing to pay on average for any Hand-e-cap and BroBot V1?
KPQ-EA4ZA has Mitsumi hybrid switches, right? If so, it's worth next to nothing to most people.
https://elitekeyboards.com/products.php?sub=access,cherrymxkeys&pid=cf_5c_gumrothttp://geekhack.org/index.php?topic=59608.0 (http://geekhack.org/index.php?topic=59608.0)
how much is this worth in clack skulls?
is it easier to sell it for money to buy a clack skull or to trade it for a clack skull?
How much is a Pink Blank Realforce keycaps set worth? Not planning to sell it but it would be nice to know its market value so that I can trade easier.
Wow, didn't know it was gonna be that high. I guess I'll start a classified thread soon to trade/sell it. Thanks for the info.How much is a Pink Blank Realforce keycaps set worth? Not planning to sell it but it would be nice to know its market value so that I can trade easier.
The last one that was up for sale here went for $150. I think you could probably get $200.
Price Check: Poker2 plate ( 60% plate ) stock poker 2 plate, no cut outs for switch top removal or anything.10-15 bux
I have an extra sitting around, may sell/trade it for other keyboard goodies.
how much is a g80-2100 hdd? just checking the price, not selling one
Price Check: Poker2 plate ( 60% plate ) stock poker 2 plate, no cut outs for switch top removal or anything.
I have an extra sitting around, may sell/trade it for other keyboard goodies.
Kmac 2 set, not put together. Some guy on mechmarket is selling one for 365 and that seems absurd to me.They sold for $400 brand new, so...
Already put together ones go for less than that. Maybe I will pick it up though.You're probably thinking of KMAC 1, 1.2 or LE. I haven't seen a KMAC2 assembled for less than $400.
Ah ok. Thank you for correcting me.Already put together ones go for less than that. Maybe I will pick it up though.You're probably thinking of KMAC 1, 1.2 or LE. I haven't seen a KMAC2 assembled for less than $400.
How much should I pay for a like new in box real force 23ub?you can buy them new for 200 ish so mby 175?
How much should I pay for a like new in box real force 23ub?you can buy them new for 200 ish so mby 175?
How much should I pay for a like new in box real force 23ub?you can buy them new for 200 ish so mby 175?
Oh shoot the guy wants 135...
About how much are fully restored and bolt-modded Model Ms going for these days?
Do you mean more? I'd say a little more than that though. A decent condition model m that would go for $50 would go for around $70 bolt-modded and fully restoredAbout how much are fully restored and bolt-modded Model Ms going for these days?
My knee-jerk reaction would be to say 10% less than un-restored and non-bolt-modded Model Ms but ezrahilyer would be the better person to ask. He has been far more successful than I in selling these.
110 vintage black switches, lubed and stickered, how much is it worth?About $30.
110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Well he didn't accept my bid for 40-50$ and says they are worth more than 0.65 ea, cause they are rarer than newly made mx blacks...110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
Well he didn't accept my bid for 40-50$ and says they are worth more than 0.65 ea, cause they are rarer than newly made mx blacks...110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
I believe we've had a rather long discussion about this before. Stickers are worthless. Lube, maybe. I'd say $45 top, if someone really wants them lubed. Around $30 is normal price for vintage blacks and I've seen $15 as customization fee in some deals.110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
I believe we've had a rather long discussion about this before. Stickers are worthless. Lube, maybe. I'd say $45 top, if someone really wants them lubed. Around $30 is normal price for vintage blacks and I've seen $15 as customization fee in some deals.110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
I would appreciate if you didn't twist my words;Well he didn't accept my bid for 40-50$ and says they are worth more than 0.65 ea, cause they are rarer than newly made mx blacks...110 vintage black switches, lubed and stickered, how much is it worth?About $30.
Lubed and stickered I'd say higher than that.
Stickers may be functionally worthless, but some people want them anyway. And the person doing the very labor intensive job of positioning each sticker on the switch deserves to be compensated for their time. I have most certainly charged extra for it when I have done builds, when people insisted on stickers, despite my recommendation not to get them.
@justify: Really no need to be defensive. If you are offering the switches at $0.65/ea for 100 qty, I've already stated that is a fair price. This thread is simply a place to get opinions about the value of items.Yeah thanks for that.
In any value-added transaction, the value of something is what a buyer is willing to pay for it, and what the seller thinks is fair compensation for their labor, plus what they paid for the item originally.
I stand by my Pms and I stand by my price point. I have nothing to hide but it's just unnecessary drama, I will just have to find another source of vintage blacks and you need to find another buyer. GLWS@justify: Really no need to be defensive. If you are offering the switches at $0.65/ea for 100 qty, I've already stated that is a fair price. This thread is simply a place to get opinions about the value of items.Yeah thanks for that.
In any value-added transaction, the value of something is what a buyer is willing to pay for it, and what the seller thinks is fair compensation for their labor, plus what they paid for the item originally.
I don't mean to be defensive, it's just incredibly frustrating when a buyer twists my words to make me out to be some sort of mug, which i'm not. I would be happy to sell around that price, however Signature tried to get them off of me for $30-40 total.
I won't publish his pms because they're private messages, but what he posted in this thread doesn't reflect what took place behind PMs.
356CL dark grey edition
More or less than the 360c? Or about the same?356CL dark grey edition
A whole lot.
I'm pretty sure the rules are that they're not supposed to be sold outside of OTD but I could be wrong.
More or less than the 360c? Or about the same?356CL dark grey edition
A whole lot.
I'm pretty sure the rules are that they're not supposed to be sold outside of OTD but I could be wrong.
More or less than the 360c? Or about the same?356CL dark grey edition
A whole lot.
I'm pretty sure the rules are that they're not supposed to be sold outside of OTD but I could be wrong.
Definitely more, I couldn't tell you exactly how much though.
Edit: Ok, after a little bit of digging, supposedly they have sold in China in the past for $1300+
Indeed, the price is around 1.3k, mostly cause the people from China can bring up prices big time :OMore or less than the 360c? Or about the same?356CL dark grey edition
A whole lot.
I'm pretty sure the rules are that they're not supposed to be sold outside of OTD but I could be wrong.
Definitely more, I couldn't tell you exactly how much though.
Edit: Ok, after a little bit of digging, supposedly they have sold in China in the past for $1300+
whats the going rate for a cheat/kmac2/356mini(non og case)?
figures in my head may be 1 year out.
whats the going rate for a cheat/kmac2/356mini(non og case)?Kmac 2 is around 400$ cheat around 350-370 356 mini is about 650-700. All these prices doesn't include shipping
figures in my head may be 1 year out.
How much are vintage blues per switch?Sold some for €0.25 per switch this summer.
Hi just received this Keyboard an Cherry G81-12100 got it from ebay it uses old MY cherry switches wantet to ask is it worth something ? i just bought it for the keycaps but unfortunately the keyscaps are not doubleshot but the hole think is in mint condition better said factory newIt's worth basically nothing. MY switches = worthless keyboard, lasered keycaps = worthless keycaps. Sorry.
Hi just received this Keyboard an Cherry G81-12100 got it from ebay it uses old MY cherry switches wantet to ask is it worth something ? i just bought it for the keycaps but unfortunately the keyscaps are not doubleshot but the hole think is in mint condition better said factory new
how much is the Cherry G81-3000SAU keyset?
Just the keyset then? :)how much is the Cherry G81-3000SAU keyset?
Lots. I thonk Photekq paid over $200 for the full keyboard.
Yep! Cherry Dye-subs are pretty rare and command a high premium whenever they do pop up.Just the keyset then? :)how much is the Cherry G81-3000SAU keyset?
Lots. I thonk Photekq paid over $200 for the full keyboard.
How much is a full set of Raptor GID keycaps, a full set?CeeSA has been selling some (http://deskthority.net/for-sale-f55/56-pcs-glow-in-the-dark-brand-new-from-raptor-k1-t8489.html):
8 - 20€ w/o shipping
16 - 35€ w/o shipping
Sorry that I am basically spamming this page with questions, but how much would a 38GT in a duck poker case, with red LEDs and lubed 62g vintage clears?It's rainbow leds :)
Hey guys I think I posted a reply before but I don't see it so I apologise if it does appear to youI would have to say at most 40-50USD
Anyway looking to sell my Razer Blackwidow Ultimate 2012 (blue). Yeah I know noob keyboard, but it is my very first one and I have to say, it's much better than a rubber dome keyboard. However I am looking to upgrade to a Ducky Shine 3 TKL, so how much would be a reasonable asking price for my BW? I just have to clean off the fingerprints and it'd be spick and span clean again.
You'd get a different response at an aspie teen g4m3rZZZ 1337 phorum, but it's generally worth just the switches around here, especially considering that it's the old iOne-made BW.Hey guys I think I posted a reply before but I don't see it so I apologise if it does appear to youI would have to say at most 40-50USD
Anyway looking to sell my Razer Blackwidow Ultimate 2012 (blue). Yeah I know noob keyboard, but it is my very first one and I have to say, it's much better than a rubber dome keyboard. However I am looking to upgrade to a Ducky Shine 3 TKL, so how much would be a reasonable asking price for my BW? I just have to clean off the fingerprints and it'd be spick and span clean again.
Really? I forgot to mention I live in Australia, so aussie tax applies bahaha. I don't know the price for a new keyboard in the US, but in Aus at a big retailer such as JBHIFI, the bw ultimate sells for $220. Surely it'd be more than 50? ;)
You'd get a different response at an aspie teen g4m3rZZZ 1337 phorum, but it's generally worth just the switches around here, especially considering that it's the old iOne-made BW.Hey guys I think I posted a reply before but I don't see it so I apologise if it does appear to youI would have to say at most 40-50USD
Anyway looking to sell my Razer Blackwidow Ultimate 2012 (blue). Yeah I know noob keyboard, but it is my very first one and I have to say, it's much better than a rubber dome keyboard. However I am looking to upgrade to a Ducky Shine 3 TKL, so how much would be a reasonable asking price for my BW? I just have to clean off the fingerprints and it'd be spick and span clean again.
Really? I forgot to mention I live in Australia, so aussie tax applies bahaha. I don't know the price for a new keyboard in the US, but in Aus at a big retailer such as JBHIFI, the bw ultimate sells for $220. Surely it'd be more than 50? ;)
It's not that you'd get tagged as such a person here, there was no competition for Razer BW and SteelSeries 6G[v2] back in the day in many countries after all. However, old blackwidows made by iOne have terrible reputation around here, based on their record of quality problems (and tacky design and OTT marketing). Many gamers are simply unaware of the technical issues... and yes, many of them fall for the ridiculous marketing/design as well.You'd get a different response at an aspie teen g4m3rZZZ 1337 phorum, but it's generally worth just the switches around here, especially considering that it's the old iOne-made BW.Hey guys I think I posted a reply before but I don't see it so I apologise if it does appear to youI would have to say at most 40-50USD
Anyway looking to sell my Razer Blackwidow Ultimate 2012 (blue). Yeah I know noob keyboard, but it is my very first one and I have to say, it's much better than a rubber dome keyboard. However I am looking to upgrade to a Ducky Shine 3 TKL, so how much would be a reasonable asking price for my BW? I just have to clean off the fingerprints and it'd be spick and span clean again.
Really? I forgot to mention I live in Australia, so aussie tax applies bahaha. I don't know the price for a new keyboard in the US, but in Aus at a big retailer such as JBHIFI, the bw ultimate sells for $220. Surely it'd be more than 50? ;)
Alrighty fair enough I guess ;p. Glad I'll be moving from the BW, so I stop being grouped as an 'aspie teen g4m3rZZZ' haha ;p
What would market price for a sterling silver Brobot cherry mx be?THe guy on reddit just sold one for 188 so i'd say that's the price.
What would market price for a sterling silver Brobot cherry mx be?Whatever it sold for originally.
Black anodized LZGH 86 with vintage blacks and white ledAround 500 I think
How much it is worth now?? :(
Is it? Saw someone putting on classified since a year ago and the item is still on sale lolBlack anodized LZGH 86 with vintage blacks and white ledAround 500 I think
How much it is worth now?? :(
Idk really but around thereIs it? Saw someone putting on classified since a year ago and the item is still on sale lolBlack anodized LZGH 86 with vintage blacks and white ledAround 500 I think
How much it is worth now?? :(
I thought of 450
What does a hid liberator go for.
Hi can someone tell me, how much is a dsa dolch tenkeyless set worth?
So I ended up with a free MODA keyboard, I hate it, I'm never going to use it, cant decide wither I should just keep it incase I ever want to rob the switches out of it, or just pass it on.
Its only been used a week, still have all the packaging and everything.
Currently on amazon they are $55 ( regular MSRP of $80 ) I'm not sure if its just a sale price or what. ( previously on amazon it was more )
I figure used its probably worth $40 as is. Really don't know if its worth bothering selling it or holding on to it.
yes, brown kaihl switches.
First attempt here for asking a quick price check of an assembled Duck Viper (Grey):300 ish?
65g gold-plated spring + mx grey (tactile) both lubed + milk white stickers
cherry stabs lubed+clipped, 2x3x4mm white LEDs sanded.
side LEDs changed to ice blues
HHKB layout
Any feedback is appreciated.
300 ish?Hmm, I guess so.
;D300 ish?Hmm, I guess so.
Thanks for the prompt reply. ;)
I have several Model M's - black and blue labels. Few minor scratches, complete set of keys, and cable. Not tested, cleaned superficially. Any ideas the value of the Blue label and the Black label value?
Blue labels are worth $~10 more than black labels,
Blue labels are worth $~10 more than black labels,
Really? I would have said the opposite.
First attempt here for asking a quick price check of an assembled Duck Viper (Grey):
65g gold-plated spring + mx grey (tactile) both lubed + milk white stickers
cherry stabs lubed+clipped, 2x3x4mm white LEDs sanded.
side LEDs changed to ice blues
HHKB layout
Any feedback is appreciated.
I could use an estimate on an uncleaned kishsaver and kish-matrix (50key model F).
probably like 5 dollars :))
probably like 5 dollars :))
probably like 5 dollars :))
Wait, what? Those are worth way more than that.
probably like 5 dollars :))
Wait, what? Those are worth way more than that.
I think he's joking around because he's the one who originally asked okooko about them :)
Really rare korean alps dk from OTD? :)
Oh ok thank you for the answer anywaysReally rare korean alps dk from OTD? :)
Less than $1000. Source: eBay.
I have an original Ideazon ZBoard with minor scratches and scuffs and the original keyset with it. I know its a rubber dome, but what's it worth?
I have an original Ideazon ZBoard with minor scratches and scuffs and the original keyset with it. I know its a rubber dome, but what's it worth?
Bump?
I have an original Ideazon ZBoard with minor scratches and scuffs and the original keyset with it. I know its a rubber dome, but what's it worth?
Bump?
$1.
How much is a lightly used Topre Type Heaven 104 worth?
Excellent condition - no keycap shine or anything.
I need to get this sold before my credit card statement comes in 2 weeks!
How much is a lightly used Topre Type Heaven 104 worth?
Excellent condition - no keycap shine or anything.
I need to get this sold before my credit card statement comes in 2 weeks!
Most used type heavens I've seen sell have went for ~$130
How much is a lightly used Topre Type Heaven 104 worth?
Excellent condition - no keycap shine or anything.
I need to get this sold before my credit card statement comes in 2 weeks!
Most used type heavens I've seen sell have went for ~$130
Thanks! I'll probably sell for 120 then when I gain access to classified!
How much is a lightly used Topre Type Heaven 104 worth?
Excellent condition - no keycap shine or anything.
I need to get this sold before my credit card statement comes in 2 weeks!
Most used type heavens I've seen sell have went for ~$130
Thanks! I'll probably sell for 120 then when I gain access to classified!
Well your not gonna be there in 2 weeks times, classifieds requirements is 25 posts and 2 months of membership. Perhaps try ebay? Or deskthority marketplace.
How much should I be looking to spend to get an IBM 5160 PC XT Model F ?
How much should I be looking to spend to get an IBM 5160 PC XT Model F ?
You can probably find one for $60-75 shipped, if you are patient.
I have a Click Clack Topre 3D Skull (white skull with one red and one blue eye) that I bought a couple years ago and never used. It's literally NIB (new-in-bag); never opened.
What's a ballpark figure I could snag in the classifieds?
What would be a good asking price for an I7-2600 processor + MSI|H67MA-E45 (B3) H67 LGA1155 R motherboard + 8gigs of RAM (was around $500 3 years ago)?around 150-200?
60% Hammer Casearound 325-350 I think
Ctrl Alt 60% Nerd60
GON 60% Universal Plate / Glare Silver
MX Clear / Lubed / 62g spring
How much if assembled / unassembled?
Trying to unload unused stuff for financial reasons.
LZ Skin with 1800 layout. I can't find my invoice or what I paid for it in the group buy. Just want to price it correctly at what it cost.bump
Could I get a price check on 89' SSK Bolt modded and reconditioned from Maxx @ Phosphorglow. It also has a brand new Unicomp APL set on it. Thanks!
Could I get a price check on 89' SSK Bolt modded and reconditioned from Maxx @ Phosphorglow. It also has a brand new Unicomp APL set on it. Thanks!
I've heard really good things about his boards/bolt mods, I'm going to guess around $250 would be a fair price?
Could I get a price check on 89' SSK Bolt modded and reconditioned from Maxx @ Phosphorglow. It also has a brand new Unicomp APL set on it. Thanks!
I've heard really good things about his boards/bolt mods, I'm going to guess around $250 would be a fair price?
I would pay you this right now. :))
Could I get a price check on 89' SSK Bolt modded and reconditioned from Maxx @ Phosphorglow. It also has a brand new Unicomp APL set on it. Thanks!
I've heard really good things about his boards/bolt mods, I'm going to guess around $250 would be a fair price?
I would pay you this right now. :))
I don't want to under price his work but hopefully I'm near the ballpark price. That's what I've seen one of his previously bolt modded SSK's go for about 6 months back..
I just won and paid for the Bluetrabe Clack Key. While I don't currently have a cherry board, I am going to get one soon. However, the HHKB type-s is pretty seductive. I was wondering that if I do decide to list it (I might not because it's pretty awesome looking), would I be able to get a type-s for the cap or is my novice head stuck in the clouds?
I just won and paid for the Bluetrabe Clack Key. While I don't currently have a cherry board, I am going to get one soon. However, the HHKB type-s is pretty seductive. I was wondering that if I do decide to list it (I might not because it's pretty awesome looking), would I be able to get a type-s for the cap or is my novice head stuck in the clouds?things like this just pisses me off
I just won and paid for the Bluetrabe Clack Key. While I don't currently have a cherry board, I am going to get one soon. However, the HHKB type-s is pretty seductive. I was wondering that if I do decide to list it (I might not because it's pretty awesome looking), would I be able to get a type-s for the cap or is my novice head stuck in the clouds?
Can't we invoke the clack man him self I thought I remember somewhere he used to cancel orders with this sort of thing happening :x80Ł is like 145$? if so I would go for 150-170 since you are including an alu but it's up to you!
Also staying on subject what should a KBT Pure with ALU case marked not going to lie not super bad but there are marks from use on it, also the Pure PCB has had a wire put to jump the number 1 key, what should I put it up for, really just thinking about Ł80-Ł90 to cover the case really but I would like some advice thanks.
KBT Pure With ALU LTD case:
Fully working BUT
Case has minor/a few more serious marks from use, but its hardly noticeable from far unless you look for them.
The number 1 key has been jumped with a wire to work, had to fix it as the pcb I received the 1 key never worked :x
Also includes stock keys that have not been used
MX Red ~ Bleeeeeeeeh bleeeh bleeh keys
Okay glad I was somewhere close, more than likely just going to go for Ł80 without shipping and only send it via tracked + insurance :xSounds fair! I just get confused when you Brits use different currencys :P
I get confused when everyone else uses monopoly money :p (Every other currency but the GBP is monopoly money :p)Okay glad I was somewhere close, more than likely just going to go for Ł80 without shipping and only send it via tracked + insurance :xSounds fair! I just get confused when you Brits use different currencys :P
Anyone able to answer my question about the value of a Tope Realforce 103U?Unfortunately Variable weighted models aren't as desired around here as some of the other Realforce variants. You might have to take a bit of a hit on it in order to sell it. Maybe $175-180.
Anyone able to answer my question about the value of a Tope Realforce 103U?Unfortunately Variable weighted models aren't as desired around here as some of the other Realforce variants. You might have to take a bit of a hit on it in order to sell it. Maybe $175-180.
What should 122-Key Model F keyboards be going for nowadays? Is $135 on the high side? (Plus $45 for shipping, but that's pretty much unavoidable).
What should 122-Key Model F keyboards be going for nowadays? Is $135 on the high side? (Plus $45 for shipping, but that's pretty much unavoidable).
A little, but not too bad, especially if the case is intact.
Prices bounce around from $75 to $175 so I never know what to tell people.
And shipping to Canada is $35 more than domestic from the US (not including customs).
The board actually seems to have some cracking. It look superficial but they're there. The thing is that the guy is offering a prebuilt and set up soarer converter for another $40, which as far as I can tell are only sold by one guy and for that exact price (plus more shipping) and he's sold out. I definitely would not feel confident to make my own, but this brings the price to $220 including that and shipping for a guaranteed working board, but one which is noticeably cracked.
I am genuinely on the fence about this.
http://i.imgur.com/3ljZIIU.jpg
How much would a 2 month old black HHKB dental modded and lubed worth? I bought it from Amazon JP since the shipping cost is cheaper. There's a classified thread here: http://geekhack.org/index.php?topic=64960.0 I'm surprise that the poster is actually having trouble selling it even when the price is $210 at the moment, so I guess I'll have to ask the price of HHKB nowadays. Thanks.
Just to add something regarding the condition of the HHKB. There's some scratch nearby the mini usb port that is only visible if you shed some light on that area. The most important thing is probably the scratch on the top part of the HHKB case which happened when I start using the Bird Electron roof case( I already use the rubber sheet given and there's still a scratch).
Price check on a lexmark wheelwriter. I picked up 4 at the thrift store--I assume the caps are the only valuable part cause it'd be really expensive to ship the whole thing.
Price check on a lexmark wheelwriter. I picked up 4 at the thrift store--I assume the caps are the only valuable part cause it'd be really expensive to ship the whole thing.
If they are like mine they are mostly silly sub-legends but the 1-piece keys are solid. I tried to sell them once but got no takers.
"Code" and "Word" keys are probably the ones you could get a few extra bucks for.
What is a Model M 52G9658 worth, full set of blank keys and full original set. Super clean and bolt modded.
What is a Model M 52G9658 worth, full set of blank keys and full original set. Super clean and bolt modded.
Really hard to say. Model M prices are all over the board, and bolt-modded is even more random.
You will do better selling a 2nd set of keys separately.
What is a Model M 52G9658 worth, full set of blank keys and full original set. Super clean and bolt modded.
Really hard to say. Model M prices are all over the board, and bolt-modded is even more random.
You will do better selling a 2nd set of keys separately.
Sorry, I should have specified that I just bought this board with the extra set of keys for $55 incl shipping and was wondering if it was a good deal as this was kind of an impulse buy.
What is a Model M 52G9658 worth, full set of blank keys and full original set. Super clean and bolt modded.
Really hard to say. Model M prices are all over the board, and bolt-modded is even more random.
You will do better selling a 2nd set of keys separately.
Sorry, I should have specified that I just bought this board with the extra set of keys for $55 incl shipping and was wondering if it was a good deal as this was kind of an impulse buy.
I've sold 52Gs for $60+shipping on eBay before, and that's without a second set of keys, and not bolt modded. Granted, they took a little while to sell, but if someone wants one bad enough and the good deals have been snatched up already, they're willing to pay that much I guess.
Considering the bolt modding and extra cap set I'd say you did very well.
Considering the bolt modding and extra cap set I'd say you did very well.
160 usd for b87 winkeyless assembled? Winkeyless layout(86 keys) Black switches modded with 67g gold springs lubed and stickered. Case colour(from top to btm): transparent, black, frosty, frosty and clear legs? No caps included.That's a really good price actually
Edit: with soldered resistors for every switch alongside soldered led for caps and scroll lock. Stepped caps too,
160 usd for b87 winkeyless assembled? Winkeyless layout(86 keys) Black switches modded with 67g gold springs lubed and stickered. Case colour(from top to btm): transparent, black, frosty, frosty and clear legs? No caps included.That's a really good price actually
Edit: with soldered resistors for every switch alongside soldered led for caps and scroll lock. Stepped caps too,
Imo I think you can charge around 200 for it and it still would be a fair price160 usd for b87 winkeyless assembled? Winkeyless layout(86 keys) Black switches modded with 67g gold springs lubed and stickered. Case colour(from top to btm): transparent, black, frosty, frosty and clear legs? No caps included.That's a really good price actually
Edit: with soldered resistors for every switch alongside soldered led for caps and scroll lock. Stepped caps too,
Thank you :D but not 160 shipped though. I'll post up a thread tomorrow in classifieds. Gonna sell this and buy another board :l
Price check on a lexmark wheelwriter. I picked up 4 at the thrift store--I assume the caps are the only valuable part cause it'd be really expensive to ship the whole thing.
If they are like mine they are mostly silly sub-legends but the 1-piece keys are solid. I tried to sell them once but got no takers. "Code" and "Word" keys are probably the ones you could get a few extra bucks for.
Not keyboard related, but how much is a evga 780ti kingpin (03G-P4-3887-KR)? lightly used for about 4 month, included all accessory, original box, and 3 years warranty (not sure it is 3 years or 5 years).500-600 I think
Not keyboard related, but how much is a evga 780ti kingpin (03G-P4-3887-KR)? lightly used for about 4 month, included all accessory, original box, and 3 years warranty (not sure it is 3 years or 5 years).500-600 I think
anybody?LZ Skin with 1800 layout. I can't find my invoice or what I paid for it in the group buy. Just want to price it correctly at what it cost.bump
anybody?LZ Skin with 1800 layout. I can't find my invoice or what I paid for it in the group buy. Just want to price it correctly at what it cost.bump
anybody?LZ Skin with 1800 layout. I can't find my invoice or what I paid for it in the group buy. Just want to price it correctly at what it cost.bump
maybe PM a mod to see if they can access the now deleted LZ thread that probably had pricing information in it
Not keyboard related, but how much is a evga 780ti kingpin (03G-P4-3887-KR)? lightly used for about 4 month, included all accessory, original box, and 3 years warranty (not sure it is 3 years or 5 years).500-600 I think
I think that's probably a little high unless there's something I'm missing... 980s are going for $500-$600 new.
yeah and it's going for 700 at newegg atm so I would consider it a fair priceNot keyboard related, but how much is a evga 780ti kingpin (03G-P4-3887-KR)? lightly used for about 4 month, included all accessory, original box, and 3 years warranty (not sure it is 3 years or 5 years).500-600 I think
I think that's probably a little high unless there's something I'm missing... 980s are going for $500-$600 new.
$500 is the lowest I'd go for, the card is Ti and Kingpin edition. Regular 980s are weaker than this..
OTD red alert 2.0 + 2.1
Looking to trade for it, and want to know how valuable it is so I know how much to offer.
OTD red alert 2.0 + 2.1
Looking to trade for it, and want to know how valuable it is so I know how much to offer.
jcrouse sold his for $200 http://geekhack.org/index.php?topic=50991.0
So.. Do you think the price has gone up now?OTD red alert 2.0 + 2.1
Looking to trade for it, and want to know how valuable it is so I know how much to offer.
jcrouse sold his for $200 http://geekhack.org/index.php?topic=50991.0
Paid $215 for mine. Couple years ago.
Thanks :thumb:anybody?LZ Skin with 1800 layout. I can't find my invoice or what I paid for it in the group buy. Just want to price it correctly at what it cost.bump
maybe PM a mod to see if they can access the now deleted LZ thread that probably had pricing information in it
I'll check that right now.
How much do keyboards with green,white,orange and pink alps usually cost?
How much do keyboards with green,white,orange and pink alps usually cost?
green - $$$$ very hard to find (Zenith)
white - $$ complicated (Northgate, old Focus) to $ simplified
orange - $$ or maybe $ if you are lucky (old Apple)
pink - $$ no different from orange in my opinion
but why aren't you looking for blue and be done with it?
How much is a Model F AT? Is it around the same price as a CM Novatouch?
How much is a Model F AT? Is it around the same price as a CM Novatouch?
Around $150, depending on condition. Not sure what a Novatouch runs.
Hmm thanks. Do you know how much the Model F 122 Key costs?
Hmm thanks. Do you know how much the Model F 122 Key costs?
They are all over the board.
With luck and patience, you can stumble on one for $100 or less, but $150+ is more realistic.
The last batch on ebay were selling in the $125-135 + shipping range, if I remember correctly.
Still quite a bargain considering their rarity and flexibility.
How much should I be paying for a Model F 4704 107-key in "meh" shape?
How much should I be paying for a Model F 4704 107-key in "meh" shape?
I sold all the ones out of my batch for $150 shipped. Elecplus found a whole bunch recently too, so I think the value dropped a little. Then again, I think there's going to be a batch of xwhatsit converters for something like $25 each soon, so that might make people willing to pay more for the keyboard itself since it's cheaper to get it up and running.
How much is the nuclear data keyset going for right now? I missed out on the group buy, and i really want it.Should be around 100$ + shipping afaik but depends on which keys he is including.
Some guy on reddit tried it sell me his at like $130 and he stated "Well people are selling them on geekwhack for like $150, and some of them don't even have the extras I have" I know that is a complete lie, and i'm just wondering how much the base set + the radioactive mods are going for. Thanks!
How much is the nuclear data keyset going for right now? I missed out on the group buy, and i really want it.
Some guy on reddit tried it sell me his at like $130 and he stated "Well people are selling them on geekwhack for like $150, and some of them don't even have the extras I have" I know that is a complete lie, and i'm just wondering how much the base set + the radioactive mods are going for. Thanks!
How much is the nuclear data keyset going for right now? I missed out on the group buy, and i really want it.
Some guy on reddit tried it sell me his at like $130 and he stated "Well people are selling them on geekwhack for like $150, and some of them don't even have the extras I have" I know that is a complete lie, and i'm just wondering how much the base set + the radioactive mods are going for. Thanks!
Unless people are being total trolls they should be selling for group buy price plus shipping. You can see the group buy kits and pricing here http://www.pimpmykeyboard.com/deals/nuclear-data-green-old-skool-sa-row-3-keycaps/
Also do know there were replacement caps just sent out to fix a few things to the original participants so you might want to hold off on buying.
One last check for an LZ skin 1800
One last check for an LZ skin 1800iirc, the lz skin 1800 originally was about $250-300, but I may be wrong.
KMAC 2 winkeyless titanium price? It is assembled.
65g blues, no cable, no keycaps.KMAC 2 winkeyless titanium price? It is assembled.
Need more info than that. Switches? Keycaps? Cable?
Nubbinator bid $10 on me. geniekid bid $11. (https://geekhack.org/index.php?topic=65900.msg1542358#msg1542358) What am I realistically worth?
Nubbinator bid $10 on me. geniekid bid $11. (https://geekhack.org/index.php?topic=65900.msg1542358#msg1542358) What am I realistically worth?
Nubbinator bid $10 on me. geniekid bid $11. (https://geekhack.org/index.php?topic=65900.msg1542358#msg1542358) What am I realistically worth?
i just paid for a wedding, i cannot afford that much :-\
Do Cherry MY1800/MY7000 keyboards that have had their keycaps harvested hold any value?
I think these are early KBK caps, not 100% sure and seem lacking in any sort of stamp/print: http://i.imgur.com/gJelYSj.jpg
The mummy is odd, very low
The monster is big, easy to get stuck with both my Ducky keyboards
Hoping to trade them for brotbots. Picked both up from a guy that Ive seen around both on reddit and on GH.
I know this seller has been posted over in the "great finds" section before, so I'll just put my question here. Basically I've never tried black complicated alps before, is it worth this price to get a NIB Dell AT101W? I can't find too many reviews on the thing either. What is the switch like?Black Alps are generally considered to be pretty bad, gritty in particular (and they age quite badly). I'd take an AT101W only as a cheap kit to practice soldering or perhaps painting or something.
The one on the right is a nubbinator Rageinald
The one on the right is a nubbinator Rageinald
Thanks :) Do you know how they stand in value to say brobots?
I know this seller has been posted over in the "great finds" section before, so I'll just put my question here. Basically I've never tried black complicated alps before, is it worth this price to get a NIB Dell AT101W? I can't find too many reviews on the thing either. What is the switch like?Black Alps are generally considered to be pretty bad, gritty in particular (and they age quite badly). I'd take an AT101W only as a cheap kit to practice soldering or perhaps painting or something.
because blacks Alps is like one of the worst in the family.
because blacks Alps is like one of the worst in the family.
I will have to comment on this. Black Alps are very similar to orange/pink and can be perfectly good switches.
I have a Dell AT101 that I got new with a Dell system in the late-1990s and used it quite a bit for at least a couple of years. It is still a very serviceable and acceptable keyboard.
I have also bought "like-new" ones that were terrible.
The best word to describe AT101s is "unpredictable"
So, what you're saying is that $70 for a NIB (including shipping) is not worth it?
So, what you're saying is that $70 for a NIB (including shipping) is not worth it?
Yes, that is way too much. These were very common back in the day and do not command a premium price.
They are very solid and well-made keyboards, but they turn up regularly in 2nd hand shops for $5.
$40 shipped would be a very fair price for a good NIB specimen, especially an AT101 (AT101W has Windows keys) with original PBT caps, but you would never know without trying it, and I have pulled them out of their boxes and had them feel terrible.
Including.
Are white alps even worth anything to anyone?
So pretty much on par with cheaper MX switches?Are white alps even worth anything to anyone?
Some people love them, I'm not keen on them.
What's the general opinion on Monterry Blue switches? I just got a board with them and IMHO while they are no buckling springs they sure make Cherry switches feel like a toy for babies. Are they considered less desirable than normal blue Alps?
What's the general opinion on Monterry Blue switches? I just got a board with them and IMHO while they are no buckling springs they sure make Cherry switches feel like a toy for babies. Are they considered less desirable than normal blue Alps?
They're nice switches, but the boards they're on are usually crap, ruining their feel. They also are not interchangeable with Alps since they have an additional leg. As such, they tend to go for a fair bit less than Blue Alps.
but the boards they're on are usually crap, ruining their feel.
What's the general opinion on Monterry Blue switches? I just got a board with them and IMHO while they are no buckling springs they sure make Cherry switches feel like a toy for babies. Are they considered less desirable than normal blue Alps?
They're nice switches, but the boards they're on are usually crap, ruining their feel. They also are not interchangeable with Alps since they have an additional leg. As such, they tend to go for a fair bit less than Blue Alps.
I'm not sure I understand. Do you mean the layout of the boards it come on is bad? I agree that the small backspace is irritating but I don't think it's so annoying that it "ruins the feel". That doesn't even make sense.
Vortex Cherry Profile thick pbt dyesubs in classic beige-y flavours, slightly used, how much would that yield? Both me and the seller have no idea of exact cost.I don't think vortex make cherry profile
Vortex Cherry Profile thick pbt dyesubs in classic beige-y flavours, slightly used, how much would that yield? Both me and the seller have no idea of exact cost.I don't think vortex make cherry profile
Vortex Cherry Profile thick pbt dyesubs in classic beige-y flavours, slightly used, how much would that yield? Both me and the seller have no idea of exact cost.I don't think vortex make cherry profile
They do, evident on the massdrop vortex caps.
As to berserkfan, yes will check the profile.
Those cost what, around €140 new there? Sounds like a fair price to me.
Dolch PCB
1800 WKL NOS: $85 - $100
3000 104?: $50 - $75 depending on what means 'good' condition.
Yes, the 1.5 mods in white on black are not common and in higher demand so the set is worth more because of it. Giving insurance sounds like a good idea.
Thinking about selling on my RARE as hell Schlumburger G80-1246. Since this is the only one I have ever seen anywhere I am not really sure where I should be pricing it at...I second the question.
it's thisShow Image(http://i.imgur.com/t8XX20O.jpg)
plate mounted blacks in a matrix board with very rare layout legends doubleshots and a few pad printed. Overall in excellent condition for something from around 1985, has some mild yellowing especially on casebody. Has a 15 pin parallel connector though...
please give me an estimate on two NIB sets of AZERTY WoB cherry double shots of a Raptor K1 (+ GlowInTheDark);CeeSA sells these keyboards at Deskthority (http://deskthority.net/for-sale-f55/raptor-k1-iso-fr-w-doubleshots-t9045.html), as well as the glowing caps.
please give me an estimate on two NIB sets of AZERTY WoB cherry double shots of a Raptor K1 (+ GlowInTheDark);CeeSA sells these keyboards at Deskthority (http://deskthority.net/for-sale-f55/raptor-k1-iso-fr-w-doubleshots-t9045.html), as well as the glowing caps.
Hello,
please give me an estimate on two NIB sets of AZERTY WoB cherry double shots of a Raptor K1 (+ GlowInTheDark);
one beige/grey cherry ds, wkl set of a g81 ANSI, used but in good condition, very little to no shine;
some 12x8 Tipros with MX Blacks with crappy key caps (I know those aren worth much, just want to know what's a fair price to ask).
Thanks! :>
Would $100 shipped be a fair price for a good condition Realforce 104UB-DK keycap set? Thanks! :)I think so.
Thank you Ray!Would $100 shipped be a fair price for a good condition Realforce 104UB-DK keycap set? Thanks! :)I think so.
How much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
How much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
Yes, If I'm not mistaken, they're not even supposed to be sold outside of Korea, so they would command a very high premium here.How much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
usd??
They are actually around 2600$ from what I've heardHow much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
They are actually around 2600$ from what I've heardHow much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
It's the price in Korea. There is such a limited amount in the market so it doesn't really matter where you come from. My friend got offered 3k for one but he doesn't have the money yetThey are actually around 2600$ from what I've heardHow much is OTD 356CL? I am new here, tahnks for anyone who can help me~~1500-2000+ afaik
How much is it worth in Korea? At that price it would almost be cheaper to go in Korea yourself to get one!
$3000 for ONE keyboard? That is madness... I could live off that for a whole year in Moldova.Still cheaper than the 356l lol
$3000 for ONE keyboard? That is madness... I could live off that for a whole year in Moldova.Still cheaper than the 356l lol
$3000 for ONE keyboard? That is madness... I could live off that for a whole year in Moldova.Still cheaper than the 356l lol
http://m.blog.naver.com/dyraos/220165506027 (http://m.blog.naver.com/dyraos/220165506027)
As far as I can tell, there is no appreciable difference between these 356 boards and more common customs like the KMAC. There are just fewer of them and they've acquired a reputation for being extra desirable Ż\_(ツ)_/ŻThere is also no difference between a kmac and a filco with a vortex case
MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rareAs far as I can tell, there is no appreciable difference between these 356 boards and more common customs like the KMAC. There are just fewer of them and they've acquired a reputation for being extra desirable Ż\_(ツ)_/ŻThere is also no difference between a kmac and a filco with a vortex case
Ż\_(ツ)_/Ż
we could keep going down :P
MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
#truthMX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rareAs far as I can tell, there is no appreciable difference between these 356 boards and more common customs like the KMAC. There are just fewer of them and they've acquired a reputation for being extra desirable Ż\_(ツ)_/ŻThere is also no difference between a kmac and a filco with a vortex case
Ż\_(ツ)_/Ż
we could keep going down :P
Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
(http://tapatalk.imageshack.com/v2/14/12/11/661f5b4350bf61dd78fde3dbfec99a1d.jpg)Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
Is that powder coating?
Then what is it? ;_;Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
Is that powder coating?Show Image(http://tapatalk.imageshack.com/v2/14/12/11/661f5b4350bf61dd78fde3dbfec99a1d.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/11/cf77d33dc7b879f4c88f6d84f828bc98.jpg)
Nope!
Anodization just like apple silver or black.Then what is it? ;_;Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
Is that powder coating?Show Image(http://tapatalk.imageshack.com/v2/14/12/11/661f5b4350bf61dd78fde3dbfec99a1d.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/11/cf77d33dc7b879f4c88f6d84f828bc98.jpg)
Nope!
This isn't possible, my eyes are broken or something. That so looks like powder coating.Anodization just like apple silver or black.Then what is it? ;_;Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
Is that powder coating?Show Image(http://tapatalk.imageshack.com/v2/14/12/11/661f5b4350bf61dd78fde3dbfec99a1d.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/11/cf77d33dc7b879f4c88f6d84f828bc98.jpg)
Nope!
Let me find the blog post. I assume it's ano since all the others are. If a Korean member wants to translate I guess we can find out for sureThis isn't possible, my eyes are broken or something. That so looks like powder coating.Anodization just like apple silver or black.Then what is it? ;_;Lol just banter man, no harm meant.MX reds are just like Nixdorfs, they're both linear but Nixdorfs are more rare
Nice attempt to troll, but with Nixdorfs you're getting something substantially different-- clear tops, not otherwise available until recently reproduced. The difference between other customs and the outrageously priced 356 boards is less apparent.
But if you're basing the differences on aesthetics, 356 boards have a distinct case look that KMACs don't have. Also, 356 boards have brass inserts in the back that (afaik) no KMAC has.Show Image(http://tapatalk.imageshack.com/v2/14/12/11/3d0748ca85de093791a56be2928f83c1.jpg)
Is that powder coating?Show Image(http://tapatalk.imageshack.com/v2/14/12/11/661f5b4350bf61dd78fde3dbfec99a1d.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/11/cf77d33dc7b879f4c88f6d84f828bc98.jpg)
Nope!
IN YO FACE
just kidding
Can I get a price check on a full size Realforce 45g uniform with no caps? Thanks =)
I have a monterey k104 w/ blue alps. Picture here in my reddit thread:
http://www.reddit.com/r/MechanicalKeyboards/comments/2oy3js/photoshelp_need_help_correctly_pricing_a_monterey/
Any help on a price would be great!
Thanks TS!Can I get a price check on a full size Realforce 45g uniform with no caps? Thanks =)
No caps? $100
It's not worth the effort to actually find caps for them.
Can I get a price check on a 10th Anniversary Realforce JIS layout and a CM novatouch with and without keycaps?
Thinking about selling on my RARE as hell Schlumburger G80-1246. Since this is the only one I have ever seen anywhere I am not really sure where I should be pricing it at...
it's thisShow Image(http://i.imgur.com/t8XX20O.jpg)
plate mounted blacks in a matrix board with very rare layout legends doubleshots and a few pad printed. Overall in excellent condition for something from around 1985, has some mild yellowing especially on casebody. Has a 15 pin parallel connector though...
Thinking about selling on my RARE as hell Schlumburger G80-1246. Since this is the only one I have ever seen anywhere I am not really sure where I should be pricing it at...
it's thisShow Image(http://i.imgur.com/t8XX20O.jpg)
plate mounted blacks in a matrix board with very rare layout legends doubleshots and a few pad printed. Overall in excellent condition for something from around 1985, has some mild yellowing especially on casebody. Has a 15 pin parallel connector though...
No one has any opinion?
Hi guys I'm just going to sell my Filco NINJA Brown Switch keyboard. :)prob 150$ ishShow Image(http://i.imgur.com/w982R85.jpg)Show Image(http://i.imgur.com/y7pW9yH.jpg)Show Image(http://i.imgur.com/W90PTRX.jpg)
I bought it from Keyboard Company(keyboardco.com) about Ł126 at 21/10/2014, only used for 2 weeks. Everything is under great condition.
Gonna send with origin packs with all things it comes with (1 Keypuller, 2 WinKeys, 1 PS/2 Adapter, Warranty)
How much would you guys reckon?
Thanks!
Sorry about the ultra potato pictures , but is this what I believe it is ? :
http://imgur.com/a/pCowk
Sorry about the ultra potato pictures , but is this what I believe it is ? :
http://imgur.com/a/pCowk
aren't the switches very valuable ?Sorry about the ultra potato pictures , but is this what I believe it is ? :
http://imgur.com/a/pCowk
What, an ISO thin Wyse set? Yes. Not worth a ton since it's thin ABS, looks filthy, and requires a moogle to be useable. I wouldn't pay more than $15 for it.
aren't the switches very valuable ?
Wyse black switches ?
aren't the switches very valuable ?
Wyse black switches ?
Very valuable? Nope. And they're not Wyse Blacks, they're Cherry Blacks that may be "vintage" Blacks. If they're "vintage" (and just because it's Wyse doesn't mean they're "vintage") Blacks, they're worth about a nickel more a switch than used Blacks and "old" Blacks, so they're $0.20 to $0.30 each, with $0.25 being the most common fair price for them. And that's the desoldered, tested, and clean switch price. If you leave them on the board or if they're filthy, $010 to $0.15 a switch is a fair price.
I'm thinking of downsizing my keyboard collection, and I've been thinking of letting my duck mini go.
It looks pretty, but I don't use it, and am moving soon and that money could buy me some new furniture and stuff.
Duck Mini ( fully programable, supports multiple layouts )
Tex Alum Case ( silver )
Vintage blacks, with SIP led sockets ( includes leds )
BSP keycap set ( $150 set ) full TKL set including blue alum spacebar ( and a beige one as well )
Fantastic keyboard, but Just fishing to see what Realistically I could get for it on here.
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_4140-Edit_zps0cdd6ff4.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_4140-Edit_zps0cdd6ff4.jpg.html)
I just feel so disturbed by the prices on some of these Korean keyboards as well as the market's willingness to pay.
I just feel so disturbed by the prices on some of these Korean keyboards as well as the market's willingness to pay.
Why?
A "free market" is a mechanism to determine the price of something right now.
Ordering a basket full of parts from various sources all over the world, carefully assembling them, cleaning and adjusting - that is a significant investment of time and money and energy.
The final item that I would really like to have would be a Kingsaver, but the $300+ price tag has always put me off. That is my problem, because I am chasing a "collectible" rather than a "commodity"
If my bank account had another "0" at the end of the number I would not even blink at the purchase, but alas .....
Btw why a kingsaver?
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
lol it sounds like a fashion showNah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
it sounds like a fashion show
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
KMAC 1 with blues, lube, stickers etc, basically fully customized to your likings?around 350-400 I think
The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Damn $3000! Whenever I'll get an unknown keyboard in hand, I'll make sure to post here to be sure I'm not throwing several grands away.Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Damn $3000! Whenever I'll get an unknown keyboard in hand, I'll make sure to post here to be sure I'm not throwing several grands away.Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
If you happen to stumble across a 356cl I might happen to stumble into robbing your house :pDamn $3000! Whenever I'll get an unknown keyboard in hand, I'll make sure to post here to be sure I'm not throwing several grands away.Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.Nah there are some korean alps TKLs but in a very low rate compared to the kingsaverBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.Show Image(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)Show Image(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
In this case, you would know. :P It's a very sought after custom board. :)
MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Damn $3000! Whenever I'll get an unknown keyboard in hand, I'll make sure to post here to be sure I'm not throwing several grands away.Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
Damn $3000! Whenever I'll get an unknown keyboard in hand, I'll make sure to post here to be sure I'm not throwing several grands away.Sounds like a bargain!The board is worth around $3000 if you can find one and I'm sure the switches are harvested from an old alps board.MoreShow ImageBtw why a kingsaver?
He probably likes Alps. ;) AFAIK, Kingsaver is the most available (maybe the only?) TKL Alps custom board.
Nah there are some korean alps TKLs but in a very low rate compared to the kingsaver
(http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/9e0f9daac45e9362baf3f0c9f3b4db24.jpg)
(http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg) (http://tapatalk.imageshack.com/v2/14/12/15/8a20e9ac138b2738d5b0d336c6227a49.jpg)
This user made his own plate for alps on his 356cl
How much does that cost? Can you buy Alps switches alone? Are they expensive? Like you could do for Cherry MX.
I have a filco tenless cherry mx brown about three years old but only used for a year. Has the cream cheese and chives key caps. How much would this be valued at?about 200 for both :)Show Image(http://tapatalk.imageshack.com/v2/14/12/23/792d71497c4b3140ab094a30bf1552bc.jpg)
I have a basically brand new ducky yellow 104 w/ whites that I used once. Is there any demand for them? Could use a little extra cash for the holidays.around 30$ less than ori price
I have a basically brand new ducky yellow 104 w/ whites that I used once. Is there any demand for them? Could use a little extra cash for the holidays.around 30$ less than ori price
Non functional steelseries, perhaps $30-40 entire thing. Otherwise the used switch alone $30. Sure it's totally dead, as in no power up? Or it just has issues?
Non functional steelseries, perhaps $30-40 entire thing. Otherwise the used switch alone $30. Sure it's totally dead, as in no power up? Or it just has issues?
It powered up fine until I put it in a box that was a tight squeeze, with the power cord bent sharply to the side to fit. When I took it out and plugged it in, no power. I would guess my gorilla-boxing caused something in the cord to internally disconnect. (Before I killed it, I had the subjective impression that one key was chattering, but no testing I did would confirm that.)
What's a fair offer for a lightly used Hyperfuse DCS set (TKL + tsangan)?
G80-3000HAU, good condition
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days? I know the Blue Alps are rare, but they are so rare that I actually can't find much info on what they ought to cost.Well, considering there's a guy trying to sell a minitouch with blues for $289 I'd say quite a bit
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days? I know the Blue Alps are rare, but they are so rare that I actually can't find much info on what they ought to cost.Well, considering there's a guy trying to sell a minitouch with blues for $289 I'd say quite a bit
edit: those are montereys. still a good bit though
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days? I know the Blue Alps are rare, but they are so rare that I actually can't find much info on what they ought to cost.Well, considering there's a guy trying to sell a minitouch with blues for $289 I'd say quite a bit
edit: those are montereys. still a good bit though
Humour me here: would you consider $150 reasonable?
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days? I know the Blue Alps are rare, but they are so rare that I actually can't find much info on what they ought to cost.Well, considering there's a guy trying to sell a minitouch with blues for $289 I'd say quite a bit
edit: those are montereys. still a good bit though
Humour me here: would you consider $150 reasonable?
Give a model and condition. That could be extremely high or it could be fair. Some Northgates with Blues sold for around there recently, but anything not as well built or in less than pristine condition should be cheaper. Personally, I wouldn't pay more than $60-80 for one, but to each their own.
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days?
What's a good price for an Alps SKCM Blue board with a standard layout (no bigass enter, no small backspace, honest to god standard layout) these days?
I must admit that I am quite surprised. Until recently, I did not think that such a thing existed at all, but this may be the second model that we have seen emerge in recent months.
Personally, my Omnikey 101 with transplanted switches is far superior to this yellowed relic, but for a person without a soldering iron it seems that there really is a way to acquire your unicorn.
Based on appearance and condition, I would say that they are asking way too much, but when you are the only game in town, you make your own rules.
What is g80-5000 haaus his price In good conditio, No box.. :p
In addition, there are also 2100 hbg. Fineness general. Cap missing. Thank you. :-*
What is g80-5000 haaus his price In good conditio, No box.. :p
In addition, there are also 2100 hbg. Fineness general. Cap missing. Thank you. :-*
Thank you, but I still do not know what g80-2100hbg price?
(Attachment Link)
(Attachment Link)
Do the HKP Warmasters hold any resale value? I would like to eventually trade/get rid of the Xmas Warmaster I just bought when I'm done with it, but I'm only looking to break even - is that practical?You will almost likely break even on any keycap as long as you sell it for resale price. Don't be looking to buy caps to just sell them though...
How much would a pair of Beast switch tools (stainless steel) worth?around the ori price
How much would a pair of Beast switch tools (stainless steel) worth?around the ori price
What is g80-5000 haaus his price In good conditio, No box.. :p
In addition, there are also 2100 hbg. Fineness general. Cap missing. Thank you. :-*
Thank you, but I still do not know what g80-2100hbg price?
(Attachment Link)
(Attachment Link)
How much would a pair of Beast switch tools (stainless steel) worth?around the ori price
How much would a pair of Beast switch tools (stainless steel) worth?around the ori price
What's the original price? I couldn't find anything here. Thank you!
What is g80-5000 haaus his price In good conditio, No box.. :p
In addition, there are also 2100 hbg. Fineness general. Cap missing. Thank you. :-*
Thank you, but I still do not know what g80-2100hbg price?
(Attachment Link)
(Attachment Link)
Hmn, has lot of strange legend... I think if you could fix some of the wrong keys like get a correct numpad enter and find something with right row instead of PAGE DOWN, and something better than those other profile Windows key you stuck in the cursor block... you maybe could get something closer to $100.
In clearing out an old office, I found these two boards...
Think I might use them as bartering tools for an mx clack? :p
Are they worth something?
(http://i.imgur.com/nTLAprr.jpg?2) (http://i.imgur.com/nTLAprr.jpg?2)
Are they worth something?
How much is the SoWare keyset worth?
Ok, I was actually looking if a price I saw was accurate and it is, thanks!How much is the SoWare keyset worth?
I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each. link (https://geekhack.org/index.php?topic=50991.msg1119588#msg1119588)
Their rarity makes them rather valuable (you probably know that). If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could. Take that for whatever you want. :P
How much is the SoWare keyset worth?
I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each. link (https://geekhack.org/index.php?topic=50991.msg1119588#msg1119588)
Their rarity makes them rather valuable (you probably know that). If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could. Take that for whatever you want. :P
the #hype was realHow much is the SoWare keyset worth?
I don't remember one selling since late 2013 when jcrouse cleaned house, and he sold 2 86-key sets for $175 each. link (https://geekhack.org/index.php?topic=50991.msg1119588#msg1119588)
Their rarity makes them rather valuable (you probably know that). If a seller wanted to sell them for more than what jcrouse sold them for, I'm almost positive they could. Take that for whatever you want. :P
That sale was legendary.
How much could I get for a stock, unused quickfire rapid ISO keycap set?5-10 dollars under ori price
How much could I get for a stock, unused quickfire rapid ISO keycap set?5-10 dollars under ori price
$125 would be about right for NCR 3077 that seems to be like new. Though, just the caps and casebody really.
$200 Shipped is what I've seen most SSK's going for these days(including mine)Show Image(http://i.imgur.com/eb0d8uH.png)
Can I get a price check for a Model M SSK Ive got my eyes on?
Doesn't come with original box but it has a detachable cable still wrapped(ps/2). The keyboard itself has been used but doesnt have any cosmetic issues. White label. Overall, very clean and well managed. No specific mods listed.
Thanks in advance <3
$200 Shipped is what I've seen most SSK's going for
price for a Cherry sav, hasro and sat?
price for a Cherry sav, hasro and sat?
About $200-250 each for NIB/mint. Maybe $150-175 for ones that are visibly used but still good.
I'm currently not selling any but I just wanted a price point, but thank you all for the millions of pms anywayprice for a Cherry sav, hasro and sat?
About $200-250 each for NIB/mint. Maybe $150-175 for ones that are visibly used but still good.
Maybe those numbers were accurate in 2009-2010. Today, those boards would fetch far more (assuming anyone ever wanted to sell). $500+ for used, NIB even more I expect, maybe up to $800-900 range. $200-250 is just not realistic at all.
Maybe those numbers were accurate in 2009-2010. Today, those boards would fetch far more (assuming anyone ever wanted to sell). $500+ for used, NIB even more I expect, maybe up to $800-900 range. $200-250 is just not realistic at all.It depends on the market you're selling them on. On GH, I expect SAV/HASRO would fetch around $350-450 NIB, but on other markets I'm sure they could get much more.
Is a DS3 w/ Vortex doubleshot PBT caps = RF TKL?Maybe to someone who is specifically looking for that combo, but my guess is no.
Is a DS3 w/ Vortex doubleshot PBT caps = RF TKL?Maybe to someone who is specifically looking for that combo, but my guess is no.
It depends on the market you're selling them on. On GH, I expect SAV/HASRO would fetch around $350-450 NIB, but on other markets I'm sure they could get much more.
SAT wouldn't fetch anywhere near $800-900, even NIB. They usually sell around $350 NIB.
Btw, the boards Signature is talking about are used but very good condition. Except the SAT, which is NIB.
I bet they would be snapped up within a day at $350 on GH -- probably even at $450.I can guarantee this, because I would be the buyer if one popped up for that price :cool:
I bet they would be snapped up within a day at $350 on GH -- probably even at $450.I can guarantee this, because I would be the buyer if one popped up for that price 8)
It's strange though. October 2013 there was a mint, no box, HASRO for sale for $290. It took weeks/months to sell iirc. I really wish I had bought it back then, but I was a newb.
You can get 98% identical sets in current production, made with the same tooling. I have no idea why someone would pay 4x as much just because it older.Well, mainly because it's the original. Not everyone buys keyboards just for use, some people like to collect vintage boards. Also, some people cannot stand f/j with nubs and find them really uncomfortable, and some people don't like to have a wonky/too short right shift.
price for a Cherry sav, hasro and sat?
See Cherry product codes (http://deskthority.net/wiki/Cherry_product_codes), the last few letters in the code.price for a Cherry sav, hasro and sat?
Please pardon my ignorance and curiosity, but what are sav, hasro, and sat?
More$200 Shipped is what I've seen most SSK's going for these days(including mine)Show Image(http://i.imgur.com/eb0d8uH.png)
Can I get a price check for a Model M SSK Ive got my eyes on?
Doesn't come with original box but it has a detachable cable still wrapped(ps/2). The keyboard itself has been used but doesnt have any cosmetic issues. White label. Overall, very clean and well managed. No specific mods listed.
Thanks in advance <3
$200 Shipped is what I've seen most SSK's going for
Maybe somewhat more for a very early date in excellent condition.
You can get 98% identical sets in current production, made with the same tooling. I have no idea why someone would pay 4x as much just because it older.Well, mainly because it's the original. Not everyone buys keyboards just for use, some people like to collect vintage boards. Also, some people cannot stand f/j with nubs and find them really uncomfortable, and some people don't like to have a wonky/too short right shift.
Oh, and you do also get a nice ANSI G80 along with the keycaps in the case of the ESA.
I feel you, and I understand collecting... but some of the very high prices are surely reality distortion or simply madness. Unique models like say the 5000, or ones with some personality like some of the odd 0*** stuff from before the time of layout standardization that will NEVER EVER EVER likely be made again I can understand higher price. Its a finite thing, not likely to be reproed... I get that. Paying tons of money for plain 3000 boards, essentially just for keysets that can still be made... nope. Should originals command a price premium? Well sure, but it should be reasonable.What I'm trying to say is that _exact_ replicas can't be made. Yes, they are very, very similar - almost identical. But they are not exactly the same. Different dyesubbing equipment [for imsto's run anyway], no scooped f/j, no spacebar, messed up right shift. If it were possible to make _exact_ replicas of Cherry dyesubs, like we are able to make exact replicas of Cherry doubleshots [although nobody has due to poor legend choice] then I would agree with you 100%. I would not pay tonnes if I could get an exact replica of Cherry dyesubs, but unfortunately I can't. This is why I think the much higher prices of $350-450 are justified. That said, I think people who will pay $750+ for a 3000 are a bit insane.
What is the price range for used regular HHKB?
What would be good price for used Realforce 86U? Wanted to introduced younger bro with Topre world, so just got an idea to buy some used Topre.In US or EU?
What would be good price for used Realforce 86U? Wanted to introduced younger bro with Topre world, so just got an idea to buy some used Topre.
Price Check on a NIB Poker II - Model PKX-6100. Thanks.
Tex case for filco + filco (blue switches) + pegasus hoofI'd say somewhere in the neighborhood of ~$250-275 shipped.
how much can I get from these? They're hardly used.
Tex case for filco + filco (blue switches) + pegasus hoofI'd say somewhere in the neighborhood of ~$250-275 shipped.
how much can I get from these? They're hardly used.
Hmm, I'll let someone else chime in there, but I was just going by Tex TKL cases being $148 shipped, and a used filco going for around $100-$125. I would definitely think you'd have interested buyers since TEX TKL cases have been oos on mechanicalkeyboards.com for some time now.Tex case for filco + filco (blue switches) + pegasus hoofI'd say somewhere in the neighborhood of ~$250-275 shipped.
how much can I get from these? They're hardly used.
thanks man :)
what about the price without shipping? I'm shipping from Malaysia and I understand that this is a heavy case and I'm willing to cover at least half of the shipping fees.
How about a Leopold FC660C?condition?
I'm not selling, just wondering how much one would sell it for.How about a Leopold FC660C?condition?
How much for an 87 key layout black skeldon?
How much for an 87 key layout black skeldon?What do they look like, I have never seen one before.
(https://farm6.staticflickr.com/5572/14743951028_f950432526_o.jpg) (https://flic.kr/p/osSAYd)Skeldon (https://flic.kr/p/osSAYd) by HoffmanMyster (https://www.flickr.com/people/99522542@N03/), on FlickrHow much for an 87 key layout black skeldon?What do they look like, I have never seen one before.
(https://farm6.staticflickr.com/5572/14743951028_f950432526_o.jpg) (https://flic.kr/p/osSAYd)Skeldon (https://flic.kr/p/osSAYd) by HoffmanMyster (https://www.flickr.com/people/99522542@N03/), on FlickrHow much for an 87 key layout black skeldon?What do they look like, I have never seen one before.
Damn that looks really nice.(https://farm6.staticflickr.com/5572/14743951028_f950432526_o.jpg) (https://flic.kr/p/osSAYd)Skeldon (https://flic.kr/p/osSAYd) by HoffmanMyster (https://www.flickr.com/people/99522542@N03/), on FlickrHow much for an 87 key layout black skeldon?What do they look like, I have never seen one before.
Whats the price like for 2x radeon hd 7970? Sapphire reference and gigabyte windforce125-150 ea
How much would you pay for granite set as below? Mint condition. From PMK...
Granite DSA V1 (RX) Base, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Icon Modifiers, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Numpad, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) WASD, Black on Various [DyeSub PBT]
Granite DSA V1 (RX) Enter, Black on Blue [DyeSub PBT]
Granite DSA V1 (RX) Nerdom, Black on Gray [DyeSub PBT]
Anyone with advise?
Getting the set soon at about $130usd...How much would you pay for granite set as below? Mint condition. From PMK...
Granite DSA V1 (RX) Base, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Icon Modifiers, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Numpad, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) WASD, Black on Various [DyeSub PBT]
Granite DSA V1 (RX) Enter, Black on Blue [DyeSub PBT]
Granite DSA V1 (RX) Nerdom, Black on Gray [DyeSub PBT]
Anyone with advise?
Getting the set soon at about $130usd...How much would you pay for granite set as below? Mint condition. From PMK...
Granite DSA V1 (RX) Base, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Icon Modifiers, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) Numpad, Black on Gray [DyeSub PBT]
Granite DSA V1 (RX) WASD, Black on Various [DyeSub PBT]
Granite DSA V1 (RX) Enter, Black on Blue [DyeSub PBT]
Granite DSA V1 (RX) Nerdom, Black on Gray [DyeSub PBT]
I would pay the prices of the original Group Buy. Unless it was worn or is otherwise in poor condition.
https://www.massdrop.com/buy/granite-keycap-set?mode=guest_open
It was from PMK GB.
Looking for a ballpark price for a 4704 77 key.
Looking for a ballpark price for a 4704 77 key.
If you're selling, I'm interested.
How much would a set of unused HHKB Pro keycaps in black be likely to fetch? I would very much like a HHKB with a black body and white keys, so I'm going to splurge and order a black one and a set of white keys, and then sell the black keys.
How much would a set of unused HHKB Pro keycaps in black be likely to fetch? I would very much like a HHKB with a black body and white keys, so I'm going to splurge and order a black one and a set of white keys, and then sell the black keys.
Probably $10 less than EK's shipped price.
Look at Ellipse's posts in DT Marketplace.Looking for a ballpark price for a 4704 77 key.
If you're selling, I'm interested.
Sorry, looking to buy.
I'm not sure if this has been asked before, but how much does a the stock Poker 2 plastic case worth?
I'm not sure if this has been asked before, but how much does a the stock Poker 2 plastic case worth?
I would probably ask in the neighborhood of $15, plus or minus $5.
would anyone be interested in 2x 7970 for 250 shipped?condition and use?
would anyone be interested in 2x 7970 for 250 shipped?condition and use?
Look at Ellipse's posts in DT Marketplace.Looking for a ballpark price for a 4704 77 key.
If you're selling, I'm interested.
Sorry, looking to buy.
https://imgur.com/U4ZdfAK,sRv1jcC,Fw4TOsghammercase alone aound 250$ inc ships idk about the keycaps
hammer alu case color red. all zinc keycaps except for the 2 red alu ones and custom wood wrist-rest. keycap puller included. no cable tho.
price info plx =)
https://imgur.com/U4ZdfAK,sRv1jcC,Fw4TOsghammercase alone aound 250$ inc ships idk about the keycaps
hammer alu case color red. all zinc keycaps except for the 2 red alu ones and custom wood wrist-rest. keycap puller included. no cable tho.
price info plx =)
you can prob get around 350$ shipped exc keyshttps://imgur.com/U4ZdfAK,sRv1jcC,Fw4TOsghammercase alone aound 250$ inc ships idk about the keycaps
hammer alu case color red. all zinc keycaps except for the 2 red alu ones and custom wood wrist-rest. keycap puller included. no cable tho.
price info plx =)
thank you. also forgot to say it has poker 2 pcb/plate with mx blues and full blue leds
I know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?10 under ori prob
I know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?
I might have worded it wrong, but the one I have is from 1983, the original, unless they are actually only worth that much.I know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?10 under ori prob
MiI know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?
Microsoft made many mice. The "Wheel Mouse Optical" enjoys a very good reputation, I use mine every day and have a couple of backups.
This one? http://www.myoldcomputers.com/museum/perif/pics/mouse1.jpgMiI know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?
Microsoft made many mice. The "Wheel Mouse Optical" enjoys a very good reputation, I use mine every day and have a couple of backups.
I think I paid all of $10 or $20 for my Wheel Mouse Optical when it first came out.
This oneI knew people were going to get confused :( but the one I was looking for a price on was the original 1983 Microsoft Mouse.Show Image(http://defragdev.com/blog/images/2011/07/image1.png)
This oneI knew people were going to get confused :( but the one I was looking for a price on was the original 1983 Microsoft Mouse.Show Image(http://defragdev.com/blog/images/2011/07/image1.png)
This oneI knew people were going to get confused :( but the one I was looking for a price on was the original 1983 Microsoft Mouse.Show Image(http://defragdev.com/blog/images/2011/07/image1.png)
MiI know this is the wrong place, but does anyone know how much an original new in box Microsoft mouse goes for?
Microsoft made many mice. The "Wheel Mouse Optical" enjoys a very good reputation, I use mine every day and have a couple of backups.
https://www.massdrop.com/buy/tex-metal-case?s=keyboard%20caseThis is the best bang for the buck case for the poker 2 and 130$ shipped to singapore is a really good price! The only case that would be cheaper is maybe the black vortex 60$ case @ pexon. I think the doubleshots is around 20$ under ori if they are in used condition.
What's a good price for a metal casing for a Poker? This one on massdrop is aluminium and is $130 shipped to Singapore.
Friend asked me and I honestly have no clue what is a good price is for these things, and whether a 60% Tex casing will really fit a Poker.
Also, price check on Vortex PBT doubleshot keycaps. Red on white, and Green on white. I haven't been able to sell mine so maybe I priced them too high.
Price check on Ducky yellow engraved PBT keycaps, 108 keys.
Fohat, do you mean to say that you have three?
Hi i have a IBM model M Robberdome 71G46256 is it anything worth ? condition is really good no yellowing some light shining keys looks like new
Fohat, do you mean to say that you have three?
Ha Ha Ha. I actually probably have 4-5. I have 2 black ones and at least 2 white ones.
I run across them from time to time in 2nd-hand situations for $2 or so, and just pick them up if they look to be in good condition.
Fohat, do you mean to say that you have three?
Ha Ha Ha. I actually probably have 4-5. I have 2 black ones and at least 2 white ones.
I run across them from time to time in 2nd-hand situations for $2 or so, and just pick them up if they look to be in good condition.
Wow, didn't know you to be that kind of collector. Now I feel less guilty about having multiples of anything, if an older and wiser man is just as foolish...
Wow, didn't know you to be that kind of collector.
Wow, didn't know you to be that kind of collector.
In my garage, I have a box with at least 2 dozen birds' nests in plastic bags. I find them fascinating and one day I will build a display box and hang them on the wall like art.
The only birds' nests I know are in the Chinese medicine shop... quite tasty too...
https://imgur.com/WSxDFzm (https://imgur.com/WSxDFzm)
used hhkb pro 2 with full stock black keys and full stock white keys and some additional wasd/arrow keys like in the pic. thanks in advance ^_^
How much is a wey hk2000?Condition?
How much is a wey hk2000?Condition?
How much is a wey hk2000?Condition?
How much is G80-2551 NIB these days?I'm not too sure. Somewhere around 75-100EUR maybe? I know jonathanyu is looking for one. If you want to sell one, let him know ;)
How much is G80-2551 NIB these days?I'm not too sure. Somewhere around 75-100EUR maybe? I know jonathanyu is looking for one. If you want to sell one, let him know ;)
Just out of curiosity [I will probably sell for far under what it's worth, and not any time soon] what are NIB-condition French Cherry dyesubs worth?$47 max
Go away, you're mean.Just out of curiosity [I will probably sell for far under what it's worth, and not any time soon] what are NIB-condition French Cherry dyesubs worth?$47 max
Just out of curiosity [I will probably sell for far under what it's worth, and not any time soon] what are NIB-condition French Cherry dyesubs worth?
I'm considering selling my recently finished SPRiT 60%, but am not sure how much it's worth. Pricing advice would be appreciated!
Details on my build:
* SPRiT R2 60% black PCB and clear acrylic plate (supports switch top removal sans desoldering)
* Lubed/stickered 62g MX browns
* TEX clear acrylic case
* Leopold blank navy blue PBT keycaps with clear o-rings
Yeah, I would say that's a pretty fair price! ;DI'm considering selling my recently finished SPRiT 60%, but am not sure how much it's worth. Pricing advice would be appreciated!
Details on my build:
* SPRiT R2 60% black PCB and clear acrylic plate (supports switch top removal sans desoldering)
* Lubed/stickered 62g MX browns
* TEX clear acrylic case
* Leopold blank navy blue PBT keycaps with clear o-rings
Bump. $300?
kmac 1.200-250 I think
needs to be reanodized due to kmac 1's anodizing sucked. selling price without reanodizing?
What would a good price for a julysicle be?100-150
Thanks.What would a good price for a julysicle be?100-150
Northen Lights GID Reaper (MX)? :-\
https://ctrlalt.io/bro-caps/winter-is-coming
Northen Lights GID Reaper (MX)? :-\
https://ctrlalt.io/bro-caps/winter-is-coming
$35 + shipping.
Mx noxious
Northen Lights GID Reaper (MX)? :-\
https://ctrlalt.io/bro-caps/winter-is-coming
$35 + shipping.
seriously? despite being out of stock?
Thanks, I traded a csgo item for it, so item wise I lost 28$ but I don't play it anymore, and how much is a army green bb2Mx noxious
Original sale price, so $42 if it's the bot. https://ctrlalt.io/bro-caps/toxic
Northen Lights GID Reaper (MX)? :-\
https://ctrlalt.io/bro-caps/winter-is-coming
$35 + shipping.
seriously? despite being out of stock?
Thanks, I traded a csgo item for it, so item wise I lost 28$ but I don't play it anymore, and how much is a army green bb2
The artisan has requested that caps be sold at original cost, rather than being sold for a profit.
I don't sell my caps for more than they sold for, I just couldn't find it on the site.Thanks, I traded a csgo item for it, so item wise I lost 28$ but I don't play it anymore, and how much is a army green bb2
Whatever the original sale price was.The artisan has requested that caps be sold at original cost, rather than being sold for a profit.
And sales for profit will result in bans from all future sales.
The artisan has requested that caps be sold at original cost, rather than being sold for a profit.
around 450 :)
A red LZ-GH, unassembled new ?
Edit : Winkeyless version
Assembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?prob 50 under ori price
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
Assembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
Assembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
I know it's a foreign concept, but the more you hang around GH, the more you will come to appreciate how sales work here.
Geekhack, being a community of enthusiasts, tends to value connections and people, over money and profits. We tend to sell things at original value, or even a bit less, to allow people who weren't able to get into the original group buys to get things at the same cost as if they had. We tend to discourage people buying rare items just to flip for a profit. And we try to help each other get good deals when we can. :)
You go to reddit to overcharge on a keyboard :pAssembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
I know it's a foreign concept, but the more you hang around GH, the more you will come to appreciate how sales work here.
Geekhack, being a community of enthusiasts, tends to value connections and people, over money and profits. We tend to sell things at original value, or even a bit less, to allow people who weren't able to get into the original group buys to get things at the same cost as if they had. We tend to discourage people buying rare items just to flip for a profit. And we try to help each other get good deals when we can. :)
Black double shot, very good conditions. How much is worth? Thank you.
(Attachment Link)
(Attachment Link)
Black double shot, very good conditions. How much is worth? Thank you.
(Attachment Link)
(Attachment Link)
Are the stems on the 1.25 mods centered, or off-centered? If off-centered, there's a seller on eBay selling those for like $13 per set, plus shipping.
It's from the Chinese GMK groupbuy? Then whatever that cost is fair if they are still like new.
Probably around $100? That's a really complete set.It's from the Chinese GMK groupbuy? Then whatever that cost is fair if they are still like new.
I did not participate in buy. not know the price.
Would like opinions on the following. Only asking out of curiosity, no PMs please!pm sent
G81-3054HAQ mint condition. It looks unused. 1 of a kind, if you exclude the shiny G81-3090HAQ that the scammer jackass has.
G81-3015HAR mint condition. It looks unused. 1 out of 2 I've seen, if you exclude G81-3000HAR and G80-1000HAR.
G80-1220HAU NIB. ANSI doubleshots. NKRO 1000 series that uses the same connector as Dolch boards.
G81-3116SDU NIB. ANSI dyesubs.
G80-2100HDF. Used, shiny caps, but in original box.
IBM 3278. Very, very good condition internals. Dirty casing with messed up paint. Needs a refinishing.
IBM F 107-key.
NCR 3077 with Leeku PCB installed. Nixdorf black switches [clear tops are not included, but these are still the nicest linear switches you will ever use].
ANSI doubleshot set from ascaii in good condition. No shine but some scratches.
SUN 3219 with Leeku PCB installed. This casing is a black winkeyless casing. Seriously, seriously, seriously rare. 1 of 2. Old, lubed MX browns installed.
Full set of winkeyless ANSI white on black doubleshots. Includes rare A-profile DE ctrls, alts, and arrow keys.
NCR 3007 with 3000SFD [ISO with lubed vintage blues] PCB installed.
G81-3000SAG keycaps. Mint, like new.
G80-3000HFMGB. Most caps shiny. Original mint condition win98 winkey keycaps, center stemmed.
G80-2000HAD.
115x Nixdorf clear tops.
Would like opinions on the following. Only asking out of curiosity, no PMs please!
G81-3054HAQ mint condition. It looks unused. 1 of a kind, if you exclude the shiny G81-3090HAQ that the scammer jackass has.
G81-3015HAR mint condition. It looks unused. 1 out of 2 I've seen, if you exclude G81-3000HAR and G80-1000HAR.
G80-1220HAU NIB. ANSI doubleshots. NKRO 1000 series that uses the same connector as Dolch boards.
G81-3116SDU NIB. ANSI dyesubs.
G80-2100HDF. Used, shiny caps, but in original box.
IBM 3278. Very, very good condition internals. Dirty casing with messed up paint. Needs a refinishing.
IBM F 107-key.
NCR 3077 with Leeku PCB installed. Nixdorf black switches [clear tops are not included, but these are still the nicest linear switches you will ever use].
ANSI doubleshot set from ascaii in good condition. No shine but some scratches.
SUN 3219 with Leeku PCB installed. This casing is a black winkeyless casing. Seriously, seriously, seriously rare. 1 of 2. Old, lubed MX browns installed.
Full set of winkeyless ANSI white on black doubleshots. Includes rare A-profile DE ctrls, alts, and arrow keys.
NCR 3007 with 3000SFD [ISO with lubed vintage blues] PCB installed.
G81-3000SAG keycaps. Mint, like new.
G80-3000HFMGB. Most caps shiny. Original mint condition win98 winkey keycaps, center stemmed.
G80-2000HAD.
115x Nixdorf clear tops.
Are you selling all the things on world?Not selling anything bruh :blank:
Would like opinions on the following. Only asking out of curiosity, no PMs please!
G81-3054HAQ mint condition. It looks unused. 1 of a kind, if you exclude the shiny G81-3090HAQ that the scammer jackass has.
G81-3015HAR mint condition. It looks unused. 1 out of 2 I've seen, if you exclude G81-3000HAR and G80-1000HAR.
G80-1220HAU NIB. ANSI doubleshots. NKRO 1000 series that uses the same connector as Dolch boards.
G81-3116SDU NIB. ANSI dyesubs.
G80-2100HDF. Used, shiny caps, but in original box.
IBM 3278. Very, very good condition internals. Dirty casing with messed up paint. Needs a refinishing.
IBM F 107-key.
NCR 3077 with Leeku PCB installed. Nixdorf black switches [clear tops are not included, but these are still the nicest linear switches you will ever use].
ANSI doubleshot set from ascaii in good condition. No shine but some scratches.
SUN 3219 with Leeku PCB installed. This casing is a black winkeyless casing. Seriously, seriously, seriously rare. 1 of 2. Old, lubed MX browns installed.
Full set of winkeyless ANSI white on black doubleshots. Includes rare A-profile DE ctrls, alts, and arrow keys.
NCR 3007 with 3000SFD [ISO with lubed vintage blues] PCB installed.
G81-3000SAG keycaps. Mint, like new.
G80-3000HFMGB. Most caps shiny. Original mint condition win98 winkey keycaps, center stemmed.
G80-2000HAD.
115x Nixdorf clear tops.
How much is a Mint/Used/Worn Black model M[13?] worth?
Assembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
I know it's a foreign concept, but the more you hang around GH, the more you will come to appreciate how sales work here.
Geekhack, being a community of enthusiasts, tends to value connections and people, over money and profits. We tend to sell things at original value, or even a bit less, to allow people who weren't able to get into the original group buys to get things at the same cost as if they had. We tend to discourage people buying rare items just to flip for a profit. And we try to help each other get good deals when we can. :)
Black double shot, very good conditions. How much is worth? Thank you.
(Attachment Link)
(Attachment Link)
Are the stems on the 1.25 mods centered, or off-centered? If off-centered, there's a seller on eBay selling those for like $13 per set, plus shipping.
Oh, thank you for your guidance, eaby only deviation 1.25, and not double shot.
That this photo (spacebar) remaining keycaps are double shot.
(Attachment Link)
What is the Das II worth used? It has some slightly shiny caps.70 ish
FILCO Majestouch minila
bought for 30days only
Includes everything
All in perfection condition
(Attachment Link)
FILCO Majestouch minila
bought for 30days only
Includes everything
All in perfection condition
(Attachment Link)
Retail, less about $10
Realforce 87U Variable Weight
I'm new to the community, and would like to see what its worth! I bought this about 2 weeks ago, and decided topre wasn't my cup of tea. Thanks guysShow Image(http://imgur.com/YNCnbtI)
Price checkAssuming the condition of both are good,
HHKB Type S and HHKB.
Price Check! Isle 5!
IBM 1392835 & 1386303
Thanks!Price checkAssuming the condition of both are good,
HHKB Type S and HHKB.
$200 Shipped for the HHKB, maybe a little less.
$285-$300 for the Type-S.
Price Check! Isle 5!
IBM 1392835 & 1386303
Are those both terminal Model M's? I wouldn't pay much for one, certainly not over $35-40 shipped.
There is an INSANE seller on eBay asking $295 plus shipping for a 1386303.
I can get them for $10/each local. And they have 8 of each model number.
Price check on original cherry dyesubs in ANSI and ISO layout?
In used condition
Price check on original cherry dyesubs in ANSI and ISO layout?DE - 50eur
In used condition
French ones are worth 5$ or less from what I've heard ;DPrice check on original cherry dyesubs in ANSI and ISO layout?DE - 50eur
In used condition
Other ISO layouts - anywhere from 75-175eur depending on rarity, with the highest being Belgian, UK, other rare ones.
ANSI - This is controversial, but I would say 100eur minimum for fairly crappy condition, 225eur for very good used condition.
French ones are worth 5$ or less from what I've heard ;DPrice check on original cherry dyesubs in ANSI and ISO layout?DE - 50eur
In used condition
Other ISO layouts - anywhere from 75-175eur depending on rarity, with the highest being Belgian, UK, other rare ones.
ANSI - This is controversial, but I would say 100eur minimum for fairly crappy condition, 225eur for very good used condition.
Green Tea set from a while back?
oh, huh. I would expect it would change around after that rolled over.Green Tea set from a while back?
Whatever the group buy price was. You can find that at PMK.
Also, if anyone if selling Green Tea SmallFry kit, I'm buying. :)
Assembled semi-clear skyblue GON TKL with Ergo Clears and pink in-switch/side leds?
edit: Shouldn't a semi-clear cost more now that GON decided not to take semi-glare orders anymore?
I know it's a foreign concept, but the more you hang around GH, the more you will come to appreciate how sales work here.
Geekhack, being a community of enthusiasts, tends to value connections and people, over money and profits. We tend to sell things at original value, or even a bit less, to allow people who weren't able to get into the original group buys to get things at the same cost as if they had. We tend to discourage people buying rare items just to flip for a profit. And we try to help each other get good deals when we can. :)
I was wondering how much a CoolerMaster CM Storm Quickfire Rapid with Brown switches is worth not working. I thought one switch had died, "backspace", so I opened it up and swapped it with another switch like pause. There was no change, so I closed it back up and kept using it temporarily. Within a week, it completely stopped working all together. :/
Otherwise it's in good condition. Was regularly cleaned. There's a little sign of wear at the bottom of the board.
An almost new RealForce 87U 55g black keyboard, less than a month old, with all original packaging and accessories in pristine condition, along with a blank red Esc keycap--both from Elite Keyboards.
I do not have one, but if I were looking for any drunken clacks, what price should I be prepared for?
Thanks, I never even knew there was a thread for that, my detective skills are lacking.I do not have one, but if I were looking for any drunken clacks, what price should I be prepared for?
Check the Clack Valuation Thread.
Can I get a price check on my dark grey poker II stock pbt keycaps? They are in decent condition.
An almost new RealForce 87U 55g black keyboard, less than a month old, with all original packaging and accessories in pristine condition, along with a blank red Esc keycap--both from Elite Keyboards.
Base Set Nuclear Data? I see it at $69 on PMK but I got an offer from someone on reddit for $150 for just the base (which seemed ridiculous). How much extra would it be with the orange mods? I've got my out of the Vault Series 2 caps coming whenever and I really want this set so I can theme my kb.
Also I just have to say that the PMK concept doesn't do the set justice when compared to the actual keys on any real keyboard.
I thought so too. I don't mind paying a minor markup (like $80 or so) but that's just absurd. :l Wondering if it'll ever go on massdrop or for a second run... I have a poll on massdrop for SA/DSA kits but honestly I doubt that'll get anywhere :))Base Set Nuclear Data? I see it at $69 on PMK but I got an offer from someone on reddit for $150 for just the base (which seemed ridiculous). How much extra would it be with the orange mods? I've got my out of the Vault Series 2 caps coming whenever and I really want this set so I can theme my kb.
Also I just have to say that the PMK concept doesn't do the set justice when compared to the actual keys on any real keyboard.
Unfortunately, people will try to sell sets at markup. If you keep holding out, you can probably find one for the GB price, but with some sets that is really difficult to do. IMO, $150 for the base set is a lot.
Well, someone can ask whatever price they want when selling something. It doesn't mean you have to pay it. :)and I most certainly am not paying that, I simply don't have that amount in the bank. Plus that's ridiculously overpriced, double the set. ._.
How much do Filco Majestouch 2 full size keyboards go for?condition ?
How much do Filco Majestouch 2 full size keyboards go for?condition ?
Unless they are some kind of interesting colorway... DE sets aren't worth a whole lot as they are so common and easy to get on ebay.de pretty much daily. Usually somewhere in the neighborhood of, depending on condition, upto �25 for beige or hellgrau, �80 for black.Thanks, I figured as much. :) Came across a niceSchneider (http://www.ebay.com/itm/Computer-Tastatur-Schneider-/261743247174?ssPageName=STRK%3AMEDWX%3AIT&_trksid=p2047675.l2557&nma=true&si=bSqwueapglVApS49iHNV42174T4%253D&orig_cvip=true&rt=nc) rebrand but shipping was already €20.
I'd say Original Price minus 30-50$(depending on the condition of the item).How much do Filco Majestouch 2 full size keyboards go for?condition ?
It's actually something I'm looking at buying second hand, the condition looks fine, maybe a years use? Keys look a little shiny.
Base Set Nuclear Data? I see it at $69 on PMK but I got an offer from someone on reddit for $150 for just the base (which seemed ridiculous). How much extra would it be with the orange mods? I've got my out of the Vault Series 2 caps coming whenever and I really want this set so I can theme my kb.
Also I just have to say that the PMK concept doesn't do the set justice when compared to the actual keys on any real keyboard.
Unfortunately, people will try to sell sets at markup. If you keep holding out, you can probably find one for the GB price, but with some sets that is really difficult to do. IMO, $150 for the base set is a lot.
Keep an eye out for other Schnieder. There are some that would be more worthwhile like ones with MX 1000 or 2510 models.Thanks for the heads up. ;)
Assembled 456GTaround 600-700
A decent desko set?
Thanks!A decent desko set?
$75-100 for ones with RGB and without the trackpoint cutout keys. $50 for sets without RGB, $35 for sets with trackpoint keycaps.
356 mini?450-550
Thanks, now I just need to decide if I want that or a gon?356 mini?450-550
356 mini?Which colour?
356 mini?Which colour?
So is gray a special edition?Just rarer.
Grey - $1500+oh you mean grey as in the commando?
Black - what signature said
Yeah, or military/khaki/whatever you wanna call it :pGrey - $1500+oh you mean grey as in the commando?
Black - what signature said
MX Orangsicle ... need moar sneakers... ;_;Please post all clack price checks here sir : https://geekhack.org/index.php?topic=59608.0
MX Orangsicle ... need moar sneakers... ;_;Please post all clack price checks here sir : https://geekhack.org/index.php?topic=59608.0
Thank you.
MX Orangsicle ... need moar sneakers... ;_;Please post all clack price checks here sir : https://geekhack.org/index.php?topic=59608.0
Thank you.
*******
Price check on a KBP V60 with cherry mx whites with PBT caps? Some of the switches are inconsistent with the audible clicks.
Keyboard itself is fine, but like I said, the switches are a bit inconsistent with some making the audible clicks, while others aren't.Most of the time the mx whites are inconsistent factory ne, so I don't think that would be a problem :)
I'd rate it at about a good-very good.
Price check on XT with internal soarer?
ssk
New ISO DE Skidata without Trackball?150 ish I Think (not sure)
New ISO DE Skidata without Trackball?New as in brand new? New in its original packaging?
New as in send me a PM?New ISO DE Skidata without Trackball?New as in brand new? New in its original packaging?
New ISO DE Skidata without Trackball?New as in brand new? New in its original packaging?
What is the value of the following keyboard that i have bought from another GH member
Poker 2 Black PCB
TEX Black Aluminium Case
Vintage Black switches / Lubed / Stickered
2x3x4 Soft White LEDS
Blank PBT caps (Mods were dyed black)
Gasmask keycap
https://geekhack.org/index.php?topic=67106.0
I believe i paid $240 for it, including postage to the UK
I don't think its fair for you to PC something you bought from someone to see if it was a steal or what especially if you were already satisfied with the price he sold it for, otherwise you wouldn't have taken it.
I don't think its fair for you to PC something you bought from someone to see if it was a steal or what especially if you were already satisfied with the price he sold it for, otherwise you wouldn't have taken it.
You don't think it's fair? Just wanted to know if I could have bought them separately for a better price, I'm sure I'll like the keyboard and I'm fine with what I paid, I was just wondering if others agreed
Agreed. Retail on a new Tex case is $120, Poker II is ~$100 and the gasmask is another $22, so $240 shipped seems very fair since you essentially got the leds, switch tuning & keycaps for free.I don't think its fair for you to PC something you bought from someone to see if it was a steal or what especially if you were already satisfied with the price he sold it for, otherwise you wouldn't have taken it.
You don't think it's fair? Just wanted to know if I could have bought them separately for a better price, I'm sure I'll like the keyboard and I'm fine with what I paid, I was just wondering if others agreed
You almost certainly would have paid quite a bit more for everything separately.
Don't forget that people normally dont sell their gasmasks at 22 because most members are collecting them. Btw Mythical the switches were also vintages compared to the stock.I know but I don't flip my artisans, I never charge more than retail cost if selling, so that's my personal baseline for pricing - and you are right vintage blacks are definitely worth more.
I think the point is this:Good point sir JD.
If you want to post a price check in here to gauge if something you want to buy is priced right, that is probably a good idea, before you go ahead with the purchase.
If you need to check the value of something before you sell it, that's a good idea, also.
After you purchase something, coming here to see if you got a good deal or not is maybe not wise. You will either confirm that you got a fair deal, find out you got an amazing bargain (in which case the seller might find this thread and be filled with regret), or find out you overpaid (in which case you will be the one filled with regret). Once you as a buyer and the seller come to an agreement on price, that IS the value of the item. Something is worth exactly what one person is willing to sell it for, and another person is willing to pay for it.
80 lubed clears with 62g gold springs?
Used HHKB without caps?
Roughly 100 MX blacks desoldered form a new board, I was thinking 40ish, does this seem inline or is it too much?
HHKB Type-S lightly used for a few months ^-^$13.37
HHKB Type-S lightly used for a few months ^-^
Price check on a F-XT with really good condition foam?XTs have been selling on ebay for anywhere from $30–100, without any obvious reason for the variable price.
356cl dge , 456gt black and 360corsa silver (all un-assembled) - What much value for you guys ?1.3k roughly - dge
Poker II ISO w/ MX Blues, blue backlight hence ABS keycaps. Bought 100€ and owned for 5 months, used partially as I had another keyboard that I used more often. I thought about 70€. Do you guys think it is fair?yeah 70-75€ sounds good!
Poker II ISO w/ MX Blues, blue backlight hence ABS keycaps. Bought 100€ and owned for 5 months, used partially as I had another keyboard that I used more often. I thought about 70€. Do you guys think it is fair?yeah 70-75€ sounds good!
Price check on KUL ES-87 with Clears, used 4hrs?
Price check on Filco Majestouch 2, TKL, Ninja, 8 months?
How much is reasonable to buy an IBM PC AT (F AT) keyboard for(okay wear)?
Hello, what are these worth?1. 100$
1) Poker 2 with MX clears, used, perfect condition
2) Topre Type Heaven, used, perfect condition
3) WASD V2 with MX blues and a set of WASD keycaps, used, perfect condition
4) iKBC 60% Silver CNC Aluminium Case (http://pexonpcs.co.uk/collections/frontpage/products/60-silver-cnc-aluminium-case?variant=899015271 (http://pexonpcs.co.uk/collections/frontpage/products/60-silver-cnc-aluminium-case?variant=899015271)), used, perfect condition
5) Vortex PBT+POM keycaps, black, used, perfect condition (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1003)
6) Vortex PBT keycaps, black, used, perfect condition (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=774)
I'm looking to sell these on the classifieds section :)
Not sure if good topic, but are all Cherry keyboards mechanical?No, that looks like a G83 which is rubber dome.
I need to know is this model mechanical to be more precise:
http://static.limundoslike.com/originalslika_cherry-72075137.jpg
Not sure if good topic, but are all Cherry keyboards mechanical?Rubberdome
I need to know is this model mechanical to be more precise:
http://static.limundoslike.com/originalslika_cherry-72075137.jpg
Recently I moved to Topre boards. So, I'm pretty sure I don't need my Filco Majestouch 2 Limited Edition keyboard in excellent condition, keys don't appear to have any shine on them.
https://www.dropbox.com/s/q79w0a1k72eezy2/IMG_2174.JPG?dl=0 (https://www.dropbox.com/s/q79w0a1k72eezy2/IMG_2174.JPG?dl=0)
So, how much this beauty worth now?
Thanks.
Recently I moved to Topre boards. So, I'm pretty sure I don't need my Filco Majestouch 2 Limited Edition keyboard in excellent condition, keys don't appear to have any shine on them.
https://www.dropbox.com/s/q79w0a1k72eezy2/IMG_2174.JPG?dl=0 (https://www.dropbox.com/s/q79w0a1k72eezy2/IMG_2174.JPG?dl=0)
So, how much this beauty worth now?
Thanks.
I had mine up here on GH for a long time priced at $120 and no one seemed interested. I put it up on eBay at $160 and it sold in less than a day :)
I was going to link it but apparently the link is gone forever after 60 days. But yeah, $160 is what it sold for.
Nice Rad Hard Gamma....glad it went to some one who can appreciate it!!
BTW...if its ever looking for a new home.... ;D
I am sure there might be some value to someone, probably not much in my opinion.. Maybe $5 or $10?
I am sure there might be some value to someone, probably not much in my opinion.. Maybe $5 or $10?
Doubt it. Novelty keys, even ones from the crap bag, usually go in the $1-5 range, with over $3 being incredibly uncommon. The standard caps sell for a nickel or dime each.
I am sure there might be some value to someone, probably not much in my opinion.. Maybe $5 or $10?
Doubt it. Novelty keys, even ones from the crap bag, usually go in the $1-5 range, with over $3 being incredibly uncommon. The standard caps sell for a nickel or dime each.
Okay, you probably know more than me! :) My rationale was that someone who is really into the set may want it, but I agree it would be incredibly uncommon.
Are any of these IBMs mechanical?
Seller is close to my place, so can check them.Thx
I want to buy original, Profile-a doubleshot RGB What is worth?
I want to buy original, Profile-a doubleshot RGB What is worth?
Lowest price new at the moment is ~$15.
He's talking about original A-profile Cherry RGB caps from a g81-3254hpu. Seriously rare. Much more than $15.I want to buy original, Profile-a doubleshot RGB What is worth?
Lowest price new at the moment is ~$15.
He's talking about original A-profile Cherry RGB caps from a g81-3254hpu. Seriously rare. Much more than $15.I want to buy original, Profile-a doubleshot RGB What is worth?
Lowest price new at the moment is ~$15.
I am interested if there are GMK reproductions @ $15...seems impossible, what were you referring to?
I am interested if there are GMK reproductions @ $15...seems impossible, what were you referring to?
How Much is this PULSE /R/MK MX cap worth?Show Image(http://i.imgur.com/jdoXSDg.png)
How Much is this PULSE /R/MK MX cap worth?That one was from your grabbag right? $1-2 at most depending on how much someone wants it. Probably nothing on here.Show Image(http://i.imgur.com/jdoXSDg.png)
Probably nothing on here.
How Much is this PULSE /R/MK MX cap worth?Show Image(http://i.imgur.com/jdoXSDg.png)
Nothing here, maybe $0.10-$0.25 in their mech market.
Demotion or retired?How Much is this PULSE /R/MK MX cap worth?Show Image(http://i.imgur.com/jdoXSDg.png)
Nothing here, maybe $0.10-$0.25 in their mech market.
even as a /r/mk moderator (until about 2 weeks ago) i wouldn't buy that :p
Demotion or retired?How Much is this PULSE /R/MK MX cap worth?Show Image(http://i.imgur.com/jdoXSDg.png)
Nothing here, maybe $0.10-$0.25 in their mech market.
even as a /r/mk moderator (until about 2 weeks ago) i wouldn't buy that :p
Demotion or retired?How Much is this PULSE /R/MK MX cap worth?Show Image(http://i.imgur.com/jdoXSDg.png)
Nothing here, maybe $0.10-$0.25 in their mech market.
even as a /r/mk moderator (until about 2 weeks ago) i wouldn't buy that :p
just lost interest in it after starting to use this site more
NIB Raptor K1 with iso fr double-shots?€40 to €55
I know the Dell Quietkey is rubber dome, but I've also heard it's one of the highest quality rubber dome boards. How much is a would a fully working Dell Quietkey worth? It is missing one kickstand bit though.The good ones go for $20 shipped on Ebay (http://m.ebay.com/itm/371237417093?nav=SEARCH) so not too much unfortunately.Show Image(http://i.imgur.com/IGrpqp3.jpg)
]I know the Dell Quietkey is rubber dome, but I've also heard it's one of the highest quality rubber dome boards. How much is a would a fully working Dell Quietkey worth? It is missing one kickstand bit though.The good ones go for $20 shipped on Ebay (http://m.ebay.com/itm/371237417093?nav=SEARCH) so not too much unfortunately.Show Image(http://i.imgur.com/IGrpqp3.jpg)
No problem! They're definitely not bad for a rubber dome, I like to break mine out every so often. It was my poor mans Topre keyboard for a while.]I know the Dell Quietkey is rubber dome, but I've also heard it's one of the highest quality rubber dome boards. How much is a would a fully working Dell Quietkey worth? It is missing one kickstand bit though.The good ones go for $20 shipped on Ebay (http://m.ebay.com/itm/371237417093?nav=SEARCH) so not too much unfortunately.Show Image(http://i.imgur.com/IGrpqp3.jpg)
Thanks for the help!
KMAC mini$1337
KMAC mini$1337
I know the Dell Quietkey is rubber dome, but I've also heard it's one of the highest quality rubber dome boards. How much is a would a fully working Dell Quietkey worth? It is missing one kickstand bit though.1000REW isn't all that great. Slightly better than ordinary modern Lenovo/Dell/Logitech that come with desktops, but that doesn't say much.Show Image(http://i.imgur.com/IGrpqp3.jpg)
What is a fair price on a Dolch PAC, nothing model specific.
Thanks a lot.What is a fair price on a Dolch PAC, nothing model specific.
$75-150 depending on condition and if it's nonfunctioning (the computer part).
Thinking of trading out a couple of my boards for some Topre goodness and I'm wondering what I can get for them.Type-S would be almost instant sell at atleast 250.
The first is my Poker II with lubed and stickered 65g Ergo Clears, purple LEDs, and purple TEX aluminum case (I still have the stock key caps, case, and packaging/documentation). It has the Calm Depths set on it at the moment. The Clam Depths set includes Alphas, Mods, Numpad, Tsangan, ErgoDox and 2x Gamer Kits. I also have a color matched hard carrying case from keychatter.com for it. I'd imagine it would be best to part it out but it makes really a nice package.
Pics:
Board: http://imgur.com/a/jO3Am (http://imgur.com/a/jO3Am)
Carrying Case: http://imgur.com/a/sVGnm (http://imgur.com/a/sVGnm)
The second is my custom QFR with Blues. I'm not sure how much other people would want such a personalized board. The case is painted purple, the capslock, scrolllock, and winkey lock LEDs have been changed to purple, and it has a set of gray and purple DSA blanks on it (I also have the original keycaps and packaging/documentation).
Pics: http://imgur.com/a/ruJ0r (http://imgur.com/a/ruJ0r)
Also, what are used HHKB Type-S's going for these days?
Thanks in advance!
https://geekhack.org/index.php?topic=69016.0probably 150 ish
Gonna put a sale price on it, too. Then just buy a Realforce.
Prefer price with and without the Nostalgia keyset. Thanks.
https://geekhack.org/index.php?topic=69016.0probably 150 ish
Gonna put a sale price on it, too. Then just buy a Realforce.
Prefer price with and without the Nostalgia keyset. Thanks.
Oh mb then, which alu case is it? I didn't see that it had been customized either :Phttps://geekhack.org/index.php?topic=69016.0probably 150 ish
Gonna put a sale price on it, too. Then just buy a Realforce.
Prefer price with and without the Nostalgia keyset. Thanks.
I think he can probably get $200 for it.
I took the Pure down to the bare PCB. Installed the switches. I can't remember, but I think I clipped and lubed the stabs. Installed some 2x3x4 rectangle LEDs.
The alu case was added by BunnyLake. :)
Oh mb then, which alu case is it? I didn't see that it had been customized either :Phttps://geekhack.org/index.php?topic=69016.0probably 150 ish
Gonna put a sale price on it, too. Then just buy a Realforce.
Prefer price with and without the Nostalgia keyset. Thanks.
I think he can probably get $200 for it.
I took the Pure down to the bare PCB. Installed the switches. I can't remember, but I think I clipped and lubed the stabs. Installed some 2x3x4 rectangle LEDs.
The alu case was added by BunnyLake. :)
So ask $150 with the nostalgia keyset?
JD and Bunny are Gods among us mere mortals.
So ask $150 with the nostalgia keyset?
JD and Bunny are Gods among us mere mortals.
You can probably get $200 without keycaps. And Nostalgia would probably go for $100 or close to it by itself.
Also, what are used HHKB Type-S's going for these days?
That's pretty much what I figured. Thanks!Thinking of trading out a couple of my boards for some Topre goodness and I'm wondering what I can get for them.Type-S would be almost instant sell at atleast 250.
The first is my Poker II with lubed and stickered 65g Ergo Clears, purple LEDs, and purple TEX aluminum case (I still have the stock key caps, case, and packaging/documentation). It has the Calm Depths set on it at the moment. The Clam Depths set includes Alphas, Mods, Numpad, Tsangan, ErgoDox and 2x Gamer Kits. I also have a color matched hard carrying case from keychatter.com for it. I'd imagine it would be best to part it out but it makes really a nice package.
Pics:
Board: http://imgur.com/a/jO3Am (http://imgur.com/a/jO3Am)
Carrying Case: http://imgur.com/a/sVGnm (http://imgur.com/a/sVGnm)
The second is my custom QFR with Blues. I'm not sure how much other people would want such a personalized board. The case is painted purple, the capslock, scrolllock, and winkey lock LEDs have been changed to purple, and it has a set of gray and purple DSA blanks on it (I also have the original keycaps and packaging/documentation).
Pics: http://imgur.com/a/ruJ0r (http://imgur.com/a/ruJ0r)
Also, what are used HHKB Type-S's going for these days?
Thanks in advance!
Also, what are used HHKB Type-S's going for these days?
When Tenso and Rakutan team up for a discount shipping promotion (you just missed one unfortunately), you can get a brand new Type-S shipped directly from Japan for about $250. If you're in the market for one right now, you can still import one through Tenso or another proxy. It will cost a bit more than that but still much less than what they're going for from EliteKeyboards.
Thinking of selling my Geek Hack Space Saver (GHSS - Siig Minitouch) since I don't use it; example of one shown here: https://geekhack.org/index.php?topic=42602.msg859818#msg859818
How much should I ask for?
Isn't there a minitouch on the classifieds right now with white alps going for 70?Thinking of selling my Geek Hack Space Saver (GHSS - Siig Minitouch) since I don't use it; example of one shown here: https://geekhack.org/index.php?topic=42602.msg859818#msg859818
How much should I ask for?
How much did you pay? It has white Alps Clones (if I remember correctly) that aren't the best, but it is a nice board and layout. I think they have gone in the $80-150 range in the past, but I wouldn't pay more than $70 since I know I'd have to swap the switches.
It doesn't have the GH caps though. Those commanded a premium in the sales I've seen. I still wouldn't pay more than $70 with that, I'm just giving a range I've seen them sell in.Yeah, true
"IBM M2
Originally paired with a IBM PS1 computer. clean with slight dirt on some keys, no discoloration and works well."
How much did you pay? It has white Alps Clones (if I remember correctly) that aren't the best, but it is a nice board and layout. I think they have gone in the $80-150 range in the past, but I wouldn't pay more than $70 since I know I'd have to swap the switches.
I feel like I should sell off my HHKB Pro 2 so I can go buy a Type S. I'd be taking a bit of a loss, but I really don't need two, nor can I afford that.230 easily
Stock HHKB, had it for less than a week. White w/blank keycaps.
How much do you guys think I could get for it?
230 easily
It is 235 USD new, so, I don't know how much you paid for it, but you shouldn't be taking off more than 15$230 easily
Just clarifying, do you mean $230 before or after shipping? Assuming you also mean USD.
After currency conversion and shipping costs at the moment a brand new one is about $350 here. I'm hoping I can get somewhere around $300-$320 AUD for it. Does that seem reasonable?
That's around ~250 USD.
$235 USD new ($300 AUD) + $65 USD shipping from EK just to get into the country. It was cheaper to get one from Japan. The $350 AUD ($273 USD) I paid for it was with free shipping.You can probably get close to what you paid for it.
So are you saying I could get more for it than I'm asking? I was thinking that under optimal situations I can get close to what I paid for it. I guess I can always try for $340 or so first, and see if someone wants it.
"IBM M2
Originally paired with a IBM PS1 computer. clean with slight dirt on some keys, no discoloration and works well."
These do have a following, although most M users prefer the "classic" versions.
Clean and tested, $40 shipped or possibly more.
How much for Calm Depths keycap set with the alphas, mods, numpad, Ergodox, and 2X gamer kits in near perfect condition?
How much for Calm Depths keycap set with the alphas, mods, numpad, Ergodox, and 2X gamer kits in near perfect condition?
You can find the group buy prices here https://geekhack.org/index.php?topic=48214.0
Looking to price out a Klaxon RoW modifiers set and a Cherry Replica White on Orange Set so i can get prices in my WTS.
If you're not sure what i'm talking about, Cherry Replica White on Orange looks like thisShow Image(https://geekhack.org/index.php?action=dlattach;topic=50292.0;attach=41755;image)
Anyone know what 45g mx clear Filco 108 key is worth?
Anyone know what 45g mx clear Filco 108 key is worth?
Do clears actually work with a 45g spring? I feel like you'd end up with either a sluggish or "custom" mx lock.
Anyone know what 45g mx clear Filco 108 key is worth?
Do clears actually work with a 45g spring? I feel like you'd end up with either a sluggish or "custom" mx lock.
If the 45g springs are the ones from cherry reds, browns etc. then it's similar to the 62g korean springs.
...and 62g springs originally became popular mostly because they stuck less than stock light springs (60g Korean rating).Anyone know what 45g mx clear Filco 108 key is worth?
Do clears actually work with a 45g spring? I feel like you'd end up with either a sluggish or "custom" mx lock.
If the 45g springs are the ones from cherry reds, browns etc. then it's similar to the 62g korean springs.
...and 62g springs originally became popular mostly because they stuck less than stock light springs (60g Korean rating).Anyone know what 45g mx clear Filco 108 key is worth?
Do clears actually work with a 45g spring? I feel like you'd end up with either a sluggish or "custom" mx lock.
If the 45g springs are the ones from cherry reds, browns etc. then it's similar to the 62g korean springs.
Lube helps though. Even with much lighter springs.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
A used Filco in JIS 108 layout, with unlubed ergo Clears? I think you'd be hard pressed to get $100 for it.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
A used Filco in JIS 108 layout, with unlubed ergo Clears? I think you'd be hard pressed to get $100 for it.
I would be concerned about an unlubed ergo clear board that used light cherry springs. Could feel like the slider was getting stuck on the return stroke.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
A used Filco in JIS 108 layout, with unlubed ergo Clears? I think you'd be hard pressed to get $100 for it.
I would be concerned about an unlubed ergo clear board that used light cherry springs. Could feel like the slider was getting stuck on the return stroke.
I think it happened indeed to someone who put gateron clear spring (35g) with an mx clear stem.
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
A used Filco in JIS 108 layout, with unlubed ergo Clears? I think you'd be hard pressed to get $100 for it.
I would be concerned about an unlubed ergo clear board that used light cherry springs. Could feel like the slider was getting stuck on the return stroke.
I think it happened indeed to someone who put gateron clear spring (35g) with an mx clear stem.
Not sure what they expected... I know it happens to cherry light springs which are around 45g. 35g must be awful.
What's the lightest spring you can pair with a clear stem?
I'm sure there is discussion on the topic somewhere, but in any case, it's not really relevant to the Price Check thread. :)
the keyboard feels great. and doesnt lock up at all. yes the springs are your standard light springs from an mx brown switch.
never tried korean springs with it. but im still curious what it worth.
If you bought it modded then whatever you bought it for minus a bit due to wear. If you did the mod yourself then it's what you bought it for minus some due to wear and then add like 10-15 for the work you did.
thats my problem. i got the keyboard from a co-worker for 20 bucks. and i had the switches sitting around, brand new never used.
so the keyboard is pretty much new with barely used brown switches. and the clears where brand new outta the box. all soldering was a project that took me about 6 hours. so based on what you said the board new minus say 20% 150Cad new with no tax.so 120, + 50 for the switches. if i take some for my efforts 200? ish? would that sound about right?
A used Filco in JIS 108 layout, with unlubed ergo Clears? I think you'd be hard pressed to get $100 for it.
What about these tipros?Show Image(http://i.imgur.com/bFSFFeC.jpg)
Probably $30-40 each is what similar Tipro models seem to go for on average except on US ebay.
I've been going through my (tall) stack of unused keyboards and am thinking about getting rid of a rather interesting one.
I was a diehard Northgate Omnikey 101 user since my first PC. I've been a professional programmer since 1984, but didn't jump into the PC arena until after the 80386 came out. As I was used to pretty high quality keyboards on the workstations I'd used to that point, I picked up Omnikey 101s for both home and work. When they were introducing the 101P, I tried one out and hated it. I contacted Northgate and they said the 101P would be replacing the 101 but that they still had some 101s in stock. So I picked up 2 to put on the shelf to make myself somewhat future-proof.
Fast forward 20 years or so. Guess what? The original 101s held up well enough that I never had to raid the stash. And I've recently switched to tenkeyless boards. So on the shelf sit two untouched, never used Omnikey 101s.
Sorry for the long-winded history, but I do love these keyboards and am really torn as to whether I should find them a home where they'd actually get used.
So... any clue what these beasts would fetch?
$550 seems high to me. You're looking at $2-3 each for most if the SP novelty caps and $15-30 for the gas masks.
What should I ask for this? $100?Is the bottom row double shot or printed. G80 or G81 mods?
All genuine Cherry doubleshot and never used.
Stepped capslock is SP and center stem mount.Show Image(http://i216.photobucket.com/albums/cc249/mn_pikey/For%20Sale/DSC_3330_zpsqn7wxhcf.jpg)
Don't recall. Win and Meta keys are pad printed. Don't believe there was ever a doubleshot of those keys?
Don't recall. Win and Meta keys are pad printed. Don't believe there was ever a doubleshot of those keys?
They are all OG Cherry keys? I didn't think there was a board with such standard bottom row sizes...but I've been wrong before. Also, where did that short right shift come from?
What would the price be for a Dolch Pac 62 be *without* keys?
What would the price be for a Dolch Pac 62 be *without* keys?
Just the keyboard?
What would the price be for a Dolch Pac 62 be *without* keys?
Just the keyboard?
Yes, sorry, just the keyboard.
What would the price be for a Dolch Pac 62 be *without* keys?
Just the keyboard?
Yes, sorry, just the keyboard.
I'd say about $30-35.
Square Label Industrial M
I've been going through my (tall) stack of unused keyboards and am thinking about getting rid of a rather interesting one.
I was a diehard Northgate Omnikey 101 user since my first PC. I've been a professional programmer since 1984, but didn't jump into the PC arena until after the 80386 came out. As I was used to pretty high quality keyboards on the workstations I'd used to that point, I picked up Omnikey 101s for both home and work. When they were introducing the 101P, I tried one out and hated it. I contacted Northgate and they said the 101P would be replacing the 101 but that they still had some 101s in stock. So I picked up 2 to put on the shelf to make myself somewhat future-proof.
Fast forward 20 years or so. Guess what? The original 101s held up well enough that I never had to raid the stash. And I've recently switched to tenkeyless boards. So on the shelf sit two untouched, never used Omnikey 101s.
Sorry for the long-winded history, but I do love these keyboards and am really torn as to whether I should find them a home where they'd actually get used.
So... any clue what these beasts would fetch?
A true ANSI 101 should easily bring $200+ but they have sold recently for much less.
The ones with double sets of function keys are great but they have the stupid bigass Enter which lots of people hate.
The original ones with gold sticker labels instead of trapdoors often have blue Alps instead of white, which are highly desirable.
Photos of the keyboard layout and switch would give you a better answer.
If I want to buy the glow Cherry Caps with the blue tops, how much should I be expecting to pay?You mean these (http://deskthority.net/f-o-r-s-a-l-e-f58/56-pcs-glow-in-the-dark-brand-new-from-raptor-k1-t8489.html):
Yeah, those ones, I like the way they look. Thanks!If I want to buy the glow Cherry Caps with the blue tops, how much should I be expecting to pay?You mean these:
(http://i.imgur.com/BaGl13fl.jpg) (http://imgur.com/BaGl13f)
As far as I know they only come on the Raptor K1 Gaming keyboards. So you can either buy them from someone or track down one of those boards.
I asked their price in this thread before. Can't remember when though.
If I recall correctly something like $4 a piece?
Don't recall. Win and Meta keys are pad printed. Don't believe there was ever a doubleshot of those keys?
They are all OG Cherry keys? I didn't think there was a board with such standard bottom row sizes...but I've been wrong before. Also, where did that short right shift come from?
Looks like the beige set has an SP moogle kit?
And if the WoB set has 1.25 mods with offset stems, that will reduce the value quite a bit. Unfortunately, genuine Cherry 1.25 center-stemmed mods are the biggest factor when it comes to the cost of a full set of double shots.
This has never been out of the box (other than to flip it over to take pictures of the back and label) and appears to be perfect.
A fully working Dell AT101 with Black Alps switches. The keyboard is very dirty, but not damaged. I plan on fully cleaning it before selling. Any idea on value?Show Image(http://i.imgur.com/mpJQ1vX.jpg)
$250 shipped is fair for a Gigabyte gtx 760 right?honesty not sure, but sounds pretty close to the mark
alright, thanks. listed for $10 less just in case, want to unload it quickly$250 shipped is fair for a Gigabyte gtx 760 right?honesty not sure, but sounds pretty close to the mark
$250 shipped is fair for a Gigabyte gtx 760 right?
What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Well you could atleast answer his question...What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Recent convert from r/mk? :P
No offense intended. Those seem to be the two most popular keyboards for r/mk users.
Well you could atleast answer his question...What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Recent convert from r/mk? :P
No offense intended. Those seem to be the two most popular keyboards for r/mk users.
Corsair K70 would be around 70 - 80 $ (not sure)
Poker 2 with blues is around 80-90$
Didn't think of that actually. Thanks for the input! :)Well you could atleast answer his question...What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Recent convert from r/mk? :P
No offense intended. Those seem to be the two most popular keyboards for r/mk users.
Corsair K70 would be around 70 - 80 $ (not sure)
Poker 2 with blues is around 80-90$
You're right, sorry about that. I don't think the Corsair would sell here at all. Non-standard bottom row makes it a no-go for most who know.
What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Recent convert from r/mk? :P
No offense intended. Those seem to be the two most popular keyboards for r/mk users.
What would a Corsair K70 with Red switches go for?
And what about a Poker 2 with blues?
Recent convert from r/mk? :P
No offense intended. Those seem to be the two most popular keyboards for r/mk users.
Yes actually haha! r/mk is basically just "Look at my poker" "No look at my poker!" lol
How much are Cherry OG dyesubs worth right now?what kind?
How much are Cherry OG dyesubs worth right now?what kind?
How much could I expect to pay for a KMAC Mini and how likely is it to a) find one b) find an unassembled kit? Am I correct that they are no longer being produced (ever?)?
Mine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Mine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Sorry I don't understand. Do you have G80 Adler for sale? Sell it to meMine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Looking G80-3000 Adler might spend more money.
Oh soz I already got itSorry I don't understand. Do you have G80 Adler for sale? Sell it to meMine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Looking G80-3000 Adler might spend more money.
You w0t ?Oh soz I already got itSorry I don't understand. Do you have G80 Adler for sale? Sell it to meMine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Looking G80-3000 Adler might spend more money.
(http://i.imgur.com/nhAPpPZ.jpg)You w0t ?Oh soz I already got itSorry I don't understand. Do you have G80 Adler for sale? Sell it to meMine took a week or so to sell at $190 recently.How much are Cherry OG dyesubs worth right now?what kind?
The standard ones (101 key winkeyless) from old G8X-3000SAU boards
Looking G80-3000 Adler might spend more money.Are you trolling or did you actually get one? I would be sooo jealous, have been trying so hard to find one. :confused:
@#$%%$^# :p
What's the value on an Inifnity Standard(not hacker) + Poker kit? All keys are mint.probably like the same price or slightly below of what they went for at massdrop.
I purchased a 60% from a member here and I don't want the caps so I would like to flip them.
As seen here: https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open (https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open)
What's the value on an Inifnity Standard(not hacker) + Poker kit? All keys are mint.probably like the same price or slightly below of what they went for at massdrop.
I purchased a 60% from a member here and I don't want the caps so I would like to flip them.
As seen here: https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open (https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open)
my best guess would be like 100$ ishWhat's the value on an Inifnity Standard(not hacker) + Poker kit? All keys are mint.probably like the same price or slightly below of what they went for at massdrop.
I purchased a 60% from a member here and I don't want the caps so I would like to flip them.
As seen here: https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open (https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open)
The MD page doesn't show the price since they aren't up for grabs right now. At least not that I can find anyway.
my best guess would be like 100$ ishWhat's the value on an Inifnity Standard(not hacker) + Poker kit? All keys are mint.probably like the same price or slightly below of what they went for at massdrop.
I purchased a 60% from a member here and I don't want the caps so I would like to flip them.
As seen here: https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open (https://www.massdrop.com/buy/infinity-dye-sublimated-keycap-set?s=infinity?guest=open&mode=guest_open)
The MD page doesn't show the price since they aren't up for grabs right now. At least not that I can find anyway.
How much each of this cost? (Topre)Show Image(http://i.imgur.com/rUHwOAc.jpg)
How much each of this cost? (Topre)Show Image(http://i.imgur.com/rUHwOAc.jpg)
https://geekhack.org/index.php?topic=59608.0 (https://geekhack.org/index.php?topic=59608.0)
How much each of this cost? (Topre)You should post this at the link jonathan posted butShow Image(http://i.imgur.com/rUHwOAc.jpg)
How much each of this cost? (Topre)You should post this at the link jonathan posted butShow Image(http://i.imgur.com/rUHwOAc.jpg)
Candy corn is probably slightly less than 200 octopink is around 150 and HO is around a hundred
Is there an aftermarket for korean customs on GH?
Is there an aftermarket for korean customs on GH?which one do you want?
Is there an aftermarket for korean customs on GH?
Wwwhat? Nah. Nobody wants those. You can send them all to me and I'll dispose of them properly.
Is there an aftermarket for korean customs on GH?which one do you want?
There ahave been several aftermarket boards on the classifieds lately so there is definitly an aftermarketIs there an aftermarket for korean customs on GH?
Wwwhat? Nah. Nobody wants those. You can send them all to me and I'll dispose of them properly.
Judging by your answer I assume there is one! :PIs there an aftermarket for korean customs on GH?which one do you want?
The one I am interested in is not in the aftermarket yet. I hesitate to pull the trigger on the Orion v2. It is just that if I do so and I don't like it, I don't want to end up with a $500 board being unused in a locker room. So I guess you can always resell them afterwards considering they are in good condition.
Hey guys, I can get both of those IBM Model M for 60$, do you guys think this is a good deal ??
http://imgur.com/a/nrPkO
I have a yellow gasmask with red eyes. What is it worth?Show Image(http://i.imgur.com/C8WK9LX.jpg)
I have a yellow gasmask with red eyes. What is it worth?Show Image(http://i.imgur.com/C8WK9LX.jpg)
What you bought it for.
Got it for free. Please help! Is it only $5 or something?
My LZ-GH just died :( Is it even possible to buy a Trik PCBs anymore? Does anyone here have a spare they wouldn't mind selling?
@Joey Quinn
I don't see the 'new post' action in the classifieds. Maybe I'm not allowed to post there because of my post count...
Here are some pictures of the pcb, though I don't know exactly what to look for:Show Image(http://i.imgur.com/6K85eOQ.jpg)Show Image(http://i.imgur.com/td2t0yv.jpg)Show Image(http://i.imgur.com/kPCZ36D.jpg)
Short backstory: I got a keyboard from my company and made a thread about it (http://"https://geekhack.org/index.php?topic=66964.new#new") and then infinity cleaned, retr0brighted, and tested it (http://"https://geekhack.org/index.php?topic=68727.msg1645902#msg1645902"). I want to sell it but I don't know how much it's worth.
TL;DR: Price check for G80-11802LPAJA with JP layout that has been restored and tested (everything works)
Anyone have an idea? g80-11903lpmus
http://i.imgur.com/OAU02mx.jpg (http://i.imgur.com/OAU02mx.jpg)
This might be interesting since the keyboard is OOS in the US and the colored keycaps are no longer being made...
Topre Realforce 103UB 55g
Topre Realforce Yellow Keycaps Set
I have a Noppoo Choc Mini with cherry mx reds in near mint condition that I would like to get a price check on. The reason I say near mint is because I accidentally scratched off the "volume up" symbol on the side of the "E" key. I'm assuming this isn't a big deal for many since they enjoy custom keycaps. I used the noppoo on and off for a total of about 3 weeks and I just could not get used to the red switches (I very much prefer blue). The keyboard itself feels great but I can't seem to find one with blue switches in stock. I have all accessories including the box and original packaging.MoreShow Image(http://i.imgur.com/bSaO7C1.jpg)
So question on trade values. I have a F2 Red clack. On the clack thread it says it's worth $150. I don't plan on selling it, but would it be reasonable to hold it at this value in trades? And I am seeking Bro's v1 bots. I don't see them traded often and I know they may eventualy die off to people who leave GH and don't come back. But what are they worth tradewise? I only see them going up, as bro stated he will never make the v1 again.
So question on trade values. I have a F2 Red clack. On the clack thread it says it's worth $150. I don't plan on selling it, but would it be reasonable to hold it at this value in trades? And I am seeking Bro's v1 bots. I don't see them traded often and I know they may eventualy die off to people who leave GH and don't come back. But what are they worth tradewise? I only see them going up, as bro stated he will never make the v1 again.
Clack thread says $75-100.
So question on trade values. I have a F2 Red clack. On the clack thread it says it's worth $150. I don't plan on selling it, but would it be reasonable to hold it at this value in trades? And I am seeking Bro's v1 bots. I don't see them traded often and I know they may eventualy die off to people who leave GH and don't come back. But what are they worth tradewise? I only see them going up, as bro stated he will never make the v1 again.
Clack thread says $75-100.
That was as of June of last year. From current sales on eBay and in the trade forum, some fetch up to $300. But I am not trying to milk my clack for $300 in trades. Just wanted to know what it would be worth compared to a V1 brobot.
So question on trade values. I have a F2 Red clack. On the clack thread it says it's worth $150. I don't plan on selling it, but would it be reasonable to hold it at this value in trades? And I am seeking Bro's v1 bots. I don't see them traded often and I know they may eventualy die off to people who leave GH and don't come back. But what are they worth tradewise? I only see them going up, as bro stated he will never make the v1 again.
Clack thread says $75-100.
That was as of June of last year. From current sales on eBay and in the trade forum, some fetch up to $300. But I am not trying to milk my clack for $300 in trades. Just wanted to know what it would be worth compared to a V1 brobot.
If you're happy with the trade and the person you're trading with is happy, what does it matter?
In any case, this should be in the Clack Valuation thread, not here. And $75-150 is the market price, though $30-40 is a reasonable price.
How much would 1 Click Clack Topre Gummyrot skull go for?https://geekhack.org/index.php?topic=59608.0
So question on trade values. I have a F2 Red clack. On the clack thread it says it's worth $150. I don't plan on selling it, but would it be reasonable to hold it at this value in trades? And I am seeking Bro's v1 bots. I don't see them traded often and I know they may eventualy die off to people who leave GH and don't come back. But what are they worth tradewise? I only see them going up, as bro stated he will never make the v1 again.
What does a pink raven go for?22USD + shipping
What is the current price for a KMAC2 (Titanium) fully assembled in good condition? Is it still around $400-$500?Yeah around 450 Is my best guess
IBM Model M SSK '92 Part No. 1391472 FRU No. 1391987 I.D No. 5095195 (http://i.imgur.com/g5NTSBY.jpg)
IBM Model M SSK '92 Part No. 1391472 FRU No. 1391987 I.D No. 5095195 (http://i.imgur.com/g5NTSBY.jpg)
They vary wildly. Elecplus sold them for $75+shipping and I've seen them north of $200. $150 is a more stable price, but I would put them at no more than $125.
And, unfortunately, your photo says little about the value since it doesn't show the internals.
Just wondering, what is my Apple Adustable Keyboard worth?
Its like new, with box, but no documentation or original cables, but nice and clean.
Also, q and j dont work all the time.
Seems to sell for a lot more on eBay, in excess of 100$Well, not to sound rude, but it would seem you already had your answer before you asked.
Seems to sell for a lot more on eBay, in excess of 100$
IBM Model M SSK '92 Part No. 1391472 FRU No. 1391987 I.D No. 5095195 (http://i.imgur.com/g5NTSBY.jpg)
What is a G80-3700HAU or similar Cherry numpads worth?~$25-35 depending on condition.
Thanks!What is a G80-3700HAU or similar Cherry numpads worth?~$25-35 depending on condition.
55g type-s hhkb?$325ish maybe.... Definitely not $450+ unless donor board is included.
55g type-s hhkb?$325ish maybe.... Definitely not $450+ unless donor board is included.
You can get a type-s for $250-275 direct from PFU and buy a donor 55g board for $175-$200 and sell the donor board after the swap.
Maybe international buyers would be more due to shipping, import taxes etc.
Show Image(http://i.imgur.com/czohrK3.jpg)Show Image(http://i.imgur.com/QdVqwWb.jpg)Show Image(http://i.imgur.com/G4OPcoZ.jpg)#
MX Blacks
Can come with blank keycaps as shown or some standard non ninja Filco keycaps.
Obviously the top plate is missing. The board could be supplied without a top or with a CM Quickfire top for you to customise or with a Filco top for a bit extra. Any ideas on pricing?
UK shipping only, so prices in Ł
Thanks, Fuus
probably around a 100Ł or a hundred quid as you brits sayShow Image(http://i.imgur.com/czohrK3.jpg)Show Image(http://i.imgur.com/QdVqwWb.jpg)Show Image(http://i.imgur.com/G4OPcoZ.jpg)#
MX Blacks
Can come with blank keycaps as shown or some standard non ninja Filco keycaps.
Obviously the top plate is missing. The board could be supplied without a top or with a CM Quickfire top for you to customise or with a Filco top for a bit extra. Any ideas on pricing?
UK shipping only, so prices in Ł
Thanks, Fuus
Fully built octagon, red anodized, cherry mx blues stickered, lubed, and sip socketed by GON, switches soldered by the chemist.350-400 afaik
Original kit cost - $295 + $56 shipping
Pre-tuned mx blues by GON - $110
Soldering by thechemist - $50
Misc. Parts $10
What is a fair price?
How much is a like-new HHKB worth? I am thinking about buying one, but just in case if I don't like it and want to sell it, how much money can I get back? Thanks!I've seen them sold anywhere from $215-230 LNIB. They seem to sell fast regardless.
Fully built octagon, red anodized, cherry mx blues stickered, lubed, and sip socketed by GON, switches soldered by the chemist.350-400 afaik
Original kit cost - $295 + $56 shipping
Pre-tuned mx blues by GON - $110
Soldering by thechemist - $50
Misc. Parts $10
What is a fair price?
Fully built octagon, red anodized, cherry mx blues stickered, lubed, and sip socketed by GON, switches soldered by the chemist.350-400 afaik
Original kit cost - $295 + $56 shipping
Pre-tuned mx blues by GON - $110
Soldering by thechemist - $50
Misc. Parts $10
What is a fair price?
Oh... really? Well that's sad.
Wow that's almost same as the price for brand new from EK!How much is a like-new HHKB worth? I am thinking about buying one, but just in case if I don't like it and want to sell it, how much money can I get back? Thanks!I've seen them sold anywhere from $215-230 LNIB. They seem to sell fast regardless.
My opinions is based by that I don't think soldering adds any value (you wouldnt buy a board with switches unsoldered for 50$ less than a soldered board). Also switch modding is worth 30$ tops on top of the ori price of blues (50$). But that's just my opinionFully built octagon, red anodized, cherry mx blues stickered, lubed, and sip socketed by GON, switches soldered by the chemist.350-400 afaik
Original kit cost - $295 + $56 shipping
Pre-tuned mx blues by GON - $110
Soldering by thechemist - $50
Misc. Parts $10
What is a fair price?
Oh... really? Well that's sad.
I feel like $400 plus shipping is fair.
The board cost $350 without switches, I figure the switches + tuning + soldering is worth $50.My opinions is based by that I don't think soldering adds any value (you wouldnt buy a board with switches unsoldered for 50$ less than a soldered board). Also switch modding is worth 30$ tops on top of the ori price of blues (50$). But that's just my opinionFully built octagon, red anodized, cherry mx blues stickered, lubed, and sip socketed by GON, switches soldered by the chemist.350-400 afaik
Original kit cost - $295 + $56 shipping
Pre-tuned mx blues by GON - $110
Soldering by thechemist - $50
Misc. Parts $10
What is a fair price?
Oh... really? Well that's sad.
I feel like $400 plus shipping is fair.
I'm gonna hold a funeral for that extra $100 I spent on switches tuned by GON.
A quick q: how much for a "brand new", never used Cherry G80-1000HAD?
EDIT: Ah, and how about G81-3000LRNDE? [link (http://img20.allegroimg.pl/photos/oryginal/52/49/56/33/5249563352)] Got a couple of those babies...
What is a tenkeyless key cap set of Cherry doubleshot abs caps worth? All of the caps are brand new except for some of the modifiers which were taken from another board. They were taken from POS boards.
What is a tenkeyless key cap set of Cherry doubleshot abs caps worth? All of the caps are brand new except for some of the modifiers which were taken from another board. They were taken from POS boards.I guess you are talking about OG doubleshots from a 3000 but depending on the board: 60-130$
What about a Cherry G80-2100 with all the original keycaps on it?Which layout? Condition?
Preferably ANSI and I would prefer mild yellowing to no yellowing, but it isn't too much of a big deal.What about a Cherry G80-2100 with all the original keycaps on it?Which layout? Condition?
Preferably ANSI and I would prefer mild yellowing to no yellowing, but it isn't too much of a big deal.FYI, there is no real ANSI 2100. This is the US 2100 G80-2100HDU :
I like the design of look of the Big Ass Enter more, but hate the enter on itPreferably ANSI and I would prefer mild yellowing to no yellowing, but it isn't too much of a big deal.FYI, there is no real ANSI 2100. This is the US 2100 G80-2100HDU :Show Image(http://i.imgur.com/TkAL6.jpg)
And the ISO version :Show Image(http://sandy55.fc2web.com/keyboard/g80-2100/front_v.jpg)
If you wanted standard ANSI you would need to drill mod the PCB.
Used, good condition.. Maybe $150 for ISO, $200 for US.
Looks like a rebranded Wyse board, maybe a rebranded Televideo Wyse board. Odds are there's a mix of switches on it, not purely "vintage" Blacks.Cool, thanks!
IF it's NIB, $40-50 is probably fair, though I would never pay more than $20-30 for any Wyse board.
Looks like a rebranded Wyse board, maybe a rebranded Televideo Wyse board. Odds are there's a mix of switches on it, not purely "vintage" Blacks.Cool, thanks!
IF it's NIB, $40-50 is probably fair, though I would never pay more than $20-30 for any Wyse board.
Makes sense. Appreciate the input!Looks like a rebranded Wyse board, maybe a rebranded Televideo Wyse board. Odds are there's a mix of switches on it, not purely "vintage" Blacks.Cool, thanks!
IF it's NIB, $40-50 is probably fair, though I would never pay more than $20-30 for any Wyse board.
Oh, I should say this. Some will probably disagree with me and peg it higher, but ISO and requiring a Moogle both count as strikes for me, making it so most people would only be buying it for the switches. If it were ANSI, you might be able to get $60, but I'd still say the same price range.
hi guys,max price $100
how much worth a Olivetti KBD2812 w/ OG dyesubs in mint condition (without box however)Show Image(http://s1.postimg.org/ja1s0yjxb/DSC02276_Large.jpg)
detailed photos here: http://imgur.com/a/jyO4V
I have multiple model Ms to sell.
Thanks for the tips. Unfortunately I will have to bolt mod them to get them working, as keys are intermittent. I really appreciate the thorough response
I have multiple model Ms to sell.
I am out of the loop but I would guess about $80 each if working and complete.
Bolt-modding generally a money-losing operation, most buyers will not pay a premium for it, although some sellers such as Ezrahilyer and Space Ghost have made a successful go at it.
Go to Unicomp or clickykeyboards and buy the missing caps for $1 each and you will get a better price for your wares. The $15 for a cable may not return your investment because many M lovers have extra cables laying around.
The Lexmark-branded one may get some interest, I would kind of like to have one in my collection, but not now. I think the Lexmark label is much more handsome than the oval left label.
The 71x is not likely to bring more than $15 + shipping on ebay.
Unfortunately I will have to bolt mod them to get them working,
Thanks. I'm not too concerned with getting extra for the bolt mod, as parts are cheap, and I'll be doing one to keep, so doing the rest won't be as bad.Unfortunately I will have to bolt mod them to get them working,
You might market them as "upscale" and get better prices if you are patient.
Top dollar (as proven by ezrahilyer's success) is paid for programmable ones with internal Soarer's/Teensies.
hey guys, i have a g81-3007 sap/01 to sell, how much is it worth? it is fairly clean but untested, was planning to sell only the keycaps but if someone wants the board i will sell it too.What's the condition like? Any scratches/permanent marks? Do you have any pictures?
hey guys, i have a g81-3007 sap/01 to sell, how much is it worth? it is fairly clean but untested, was planning to sell only the keycaps but if someone wants the board i will sell it too.
I also intend to sell but do not know how much value. PCB using mx black. :Dhey guys, i have a g81-3007 sap/01 to sell, how much is it worth? it is fairly clean but untested, was planning to sell only the keycaps but if someone wants the board i will sell it too.What's the condition like? Any scratches/permanent marks? Do you have any pictures?
I'm gonna hold a funeral for that extra $100 I spent on switches tuned by GON.
Word. Those stickered/lubed clears for the Smallfry kit arrived today. Pretty sure you used an extra $50 in packing tape alone!I'm gonna hold a funeral for that extra $100 I spent on switches tuned by GON.
Thats crazy price considering my $50 included sip sockets and installation of them into switches that already have switch stickers so you have to really really take your time to install them without damaging the stickers. I also did the soldering and cleaning of the pcb for the $50. Maybe it's time to raise prices to GON's level
An Amiga 2000 keyboard with MX Blacks and a US layout? Pretty clean but untested.
(Attachment Link)
I found someone selling two Chery ErgoPlus MX 5000s. What would be a fair price for these?
Thanks.
These ones are ANSI with the F-keys on the left. I'm waiting for a response from the seller to make sure he still has them. If so, I'm picking them up tomorrow.If he used Google there is a chance he might expect a lot more (http://digest.digesttouch.com/Cherry-MX-5000-and-9000-Auction-keyboard/). (About $1250 more)
Hooray.Jealous :(Show Image(http://i.imgur.com/CJwCmCp.jpg)
Also, I have been using male pronouns for the seller, who turned out to be female. Oops.
Un-assembled apple silver 360cCorsa: ~$900 (if you can find a Chinese buyer)
Little shine ANSI Cherry Dye-sub
Very shine, yellowed ANSI Cherry Doubleshot
how much are these things sold nowadays?
btw, don't pm me about buying them, not decided to sell them or not
If the dyesubs have any shine, even just a little.. $200 absolute max I think.
Un-assembled apple silver 360cCorsa: ~$900 (if you can find a Chinese buyer)
Little shine ANSI Cherry Dye-sub
Very shine, yellowed ANSI Cherry Doubleshot
how much are these things sold nowadays?
btw, don't pm me about buying them, not decided to sell them or not
Good condition dyesubs: ~$250
Bad dyesubs: ~$100
Hooray.Saw your thread on Reddit (http://www.reddit.com/r/MechanicalKeyboards/comments/333yz6/photos_todays_loot/). That price is almost criminal. :PShow Image(http://i.imgur.com/CJwCmCp.jpg)
Also, I have been using male pronouns for the seller, who turned out to be female. Oops.
If the dyesubs have any shine, even just a little.. $200 absolute max I think.Guaranteed $250 on reddit.
shhhIf the dyesubs have any shine, even just a little.. $200 absolute max I think.Guaranteed $250 on reddit.
B.mini 50g wyse blacks. "[{" key has a cold solder joint.same price as thread? Hyperfuse would prob be 100-125$
https://geekhack.org/index.php?topic=65630.0
Also a full set of used Hyperfuse DSA. Some shine on the home keys + spacebar.
What's a good price for a full set of blank PINK realforce caps?Depending on condition, probably anywhere from $150-$200, maybe even more since pink blanks are highly sought after.
Why sell them in bundle? Many people want those gmk, but I don't think people want to spend extra money for a ducky.
How much would a poker2 ISO mx black be worth, considering:bump I didn't got price for those.
- no keycaps
- 8-10months of usage
Also QFR (stealth) ANSI Mx red 2months of usage with original caps unused.
poker iso like 80$ qfr like 20$ off oriHow much would a poker2 ISO mx black be worth, considering:bump I didn't got price for those.
- no keycaps
- 8-10months of usage
Also QFR (stealth) ANSI Mx red 2months of usage with original caps unused.
for the poker 80$ even without keycaps?poker iso like 80$ qfr like 20$ off oriHow much would a poker2 ISO mx black be worth, considering:bump I didn't got price for those.
- no keycaps
- 8-10months of usage
Also QFR (stealth) ANSI Mx red 2months of usage with original caps unused.
yeah maybe slightly less 70-75 would prob be better, It is like 100$ new right?for the poker 80$ even without keycaps?poker iso like 80$ qfr like 20$ off oriHow much would a poker2 ISO mx black be worth, considering:bump I didn't got price for those.
- no keycaps
- 8-10months of usage
Also QFR (stealth) ANSI Mx red 2months of usage with original caps unused.
about that I'll have to check precisely, thanks Signature.yeah maybe slightly less 70-75 would prob be better, It is like 100$ new right?for the poker 80$ even without keycaps?poker iso like 80$ qfr like 20$ off oriHow much would a poker2 ISO mx black be worth, considering:bump I didn't got price for those.
- no keycaps
- 8-10months of usage
Also QFR (stealth) ANSI Mx red 2months of usage with original caps unused.
Hey all,Should be slightly higher than the gb price, maybe like 0,25-0,30 per switch
I bought 300 Gateron switches (100 Clear, 100 Blue, and 100 Brown). Also is there a demand for them.
Thanks
How much can I get for original esoomenona usps box art?Show Image(http://images.tapatalk-cdn.com/15/04/25/9c814e048297a5f7597fcdbfdeda68d5.jpg)
What is this worth?wow, cool to see someone else with one of those massive xerox boards. What switches are those?
What is this worth?wow, cool to see someone else with one of those massive xerox boards. What switches are those?
The caps definitely look hall effect, the switches seem it as well with the square mount and forward angled stem. If it is in fact hall effect, $60 seems somewhat fair. The switches are obviously highly sought after but someone will have to go through the trouble to convert it.What is this worth?wow, cool to see someone else with one of those massive xerox boards. What switches are those?
I know their linear, and I think someone mentioned that they were hall effect once. I am selling this, thinking about 60$. That a good price?
Any idea what this would be worth? Guy is asking for 400+ is he crazy or am I?I would think $375 is a fair price. I could see it going for $400+ a month ago, based on prior granite prices.
Poker 2 w/ mx clears (white), stickered, clear switch tops, SIP mod, Tex Silver Aluminum case (no lip) with aluminum feet, granite set (gamers, colored mods, text mods, base set)
https://geekhack.org/index.php?topic=71411.new#new
I stumbled across a pretty good condition Leading Edge DC-2014 blue alps keyboard.. I need to sell it, but would like some advice on a fair price, there is a bit of a range on ebay. Do I need more pictures? It seems surprisingly clean for such an old board.
I don't have a horse in the race
I don't have a horse in the race
I don't either, but if he is reluctantly selling something rare and special to pay for medical needs, he deserves to get top dollar for it.
I don't have a horse in the race
I don't either, but if he is reluctantly selling something rare and special to pay for medical needs, he deserves to get top dollar for it.
People are free to justify it however, but I've seen how sudden bills, real or imagined (and I don't claim to know anyone's situation), in here often have a deleterious effect on trust and the marketplace. It's one of the main reasons things are the way they are now. Personally, I'd rather pay $50-75 + shipping and add more as a donation to help the situation than have the price inflated. In my experience, people are more generous when they realize that people are being fair in spite of situation instead of leveraging it.
Hell, if you decide to go that route cmadrid, shoot me your Paypal and I'll send $25 your way to help with the medical costs.
You should be explicit about the purple set not being an original complete set. That will have an affect on the valuation.
You should be explicit about the purple set not being an original complete set. That will have an affect on the valuation.
The right shift is missing but I'm going to try and find that. Anything else that's missing?
You should be explicit about the purple set not being an original complete set. That will have an affect on the valuation.
The right shift is missing but I'm going to try and find that. Anything else that's missing?
1.25 Ctrl and Alts, which could definitely be a big deal for a lot of people.
Edit: If you do have those and the shift, I'd be interested. :D
You should be explicit about the purple set not being an original complete set. That will have an affect on the valuation.
The right shift is missing but I'm going to try and find that. Anything else that's missing?
1.25 Ctrl and Alts, which could definitely be a big deal for a lot of people.
Edit: If you do have those and the shift, I'd be interested. :D
I priced it at $50 shipped without the shift and 1.25x ctrl and alts. If I find them, I'll update the classified ad and let you know.
What's an original Cherry thick dyesub set in good condition worth?Show Image(http://i.imgur.com/aKXDXeYh.jpg)Show Image(http://i.imgur.com/NHcVkvNh.jpg)Show Image(http://i.imgur.com/xgdc5UYh.jpg)
Also a GMK purple set?Show Image(http://i.imgur.com/ubaPVmPh.jpg)
Thanks!
Dyesubs run the gamut, I'll let Photekq get that one.
As for GMK purple, the new full set went for $41 + shipping. Yours is missing the following keys:
- Full-touch Caps Lock
- 2.25x Shift
- Both 1.25x Alt
- Both 1.25x Ctrl
- Three 1.25x blanks
It also has two additional 1x Ctrl keys.
It's unusable with standard keyboards and only (mostly) works with winkeyless G80 or Korean keyboards. Even then you're missing a shift.
Since it's such an incomplete set and missing 7 keys that came with the original (9 if you don't count the extras that replaced them, which is just under 1/3 of the original set of 32), I'd say $20-30. It's definitely not worth the full group buy price.
Realforce 87UB (black), essentially brand new, with 45g/55g mixed domes?
yes, a minimum of two calcks per sale, one for the buyer and one for (a very special someone) to send pm aboutRealforce 87UB (black), essentially brand new, with 45g/55g mixed domes?
Any clacks involved?
If you want a quick sell I think ~$170-180 shipped CONUS, realforce boards are weird some sell super fast other just sit forever.
I've been out of the loop for awhile. Do all sales include CCs now? No, just the board....
I can't seem to remember the price of a Leeku G80-1800 PCB. What's a fair price for a Leeku G80-1800 PCB, Dolch case, G81 case, stabilizers, and "vintage" Blues? Nothing has been soldered yet since I was debating between through hole and SMD diodes.I think kin25 is selling a plate/PCB combo for 75, Dolch case maybe 75? G81 case no more than like 25, stabalizers = 12$ or less, and maybe 35 for vintage blues?
Prepare your inbox...Guilty as charged.. :-[
Obama is going in deepPrepare your inbox...Guilty as charged.. :-[
Price check needed for Zenith ZKB-2.
I found 3 in semi-grody condition that a lab is getting rid of. I think I will find a way to get one for myself at the very least. These switches are some sexy feeling linears.
Price check, these custom keycaps in many colours. Thick PBT, Cherry profile Row E (Escape key and function row). All new.
Please give me a realistic market clearing price. I have 13 of each.
(Attachment Link) (Attachment Link) (Attachment Link)
How much is a GMK Triumph Adler set worth? I just found out about it and I'm craving..
99 + shipping + paypal fees, which is what I sold mine for.you didn't sell it technically speaking, just letting someone else jump into your spot instead. like getting a refund basically. i did the same with a colorpack from Ivan's Dolch GB last year. though i think upping the price is fair game once the caps have been produced and distributed to the original buyers
anyone knows how much an OTD Red Alert set with RoW mods would go for?I'm not sure about just with the RoW mods, but a complete OTD RA 2.0 + 2.1 set is worth about $250-300.
Well, those sets were a bit extravagant, IIRC. How much did they cost in the first place? No one ever says that. Whatever is over that is Korean hypepricing.The sets were extravagant to say the least. The 2.0 set had over 170 keys I think. Here's a picture of the full 2.0 + 2.1 set. (https://www.flickr.com/photos/115722906@N08/16579780797/in/dateposted-public/)
but where are the RoW mods?? must have been another variant then, as the mod legends are different as wellRight next to the beige ones.. The beige is just quite light, so it's hard to see the difference in that picture.
ah ****e here's where i realized that i went full retard with the acronyms.. i wanted to ask about the White on Red mods, specifically thisThat looks like it could be either the red alert v2 group buy run by ragnorock or the klaxon group buy run by tjcaustin. Both GH group buys, nothing to do with OTD. I would guess the market prices would be far more reasonable, but I haven't seen one for sale in a while.Show Image(http://cdn.keypuller.com/2014/07/redalert-960x637.jpg)
must be the RA 1.0 then?
99 + shipping + paypal fees, which is what I sold mine for.you didn't sell it technically speaking, just letting someone else jump into your spot instead. like getting a refund basically. i did the same with a colorpack from Ivan's Dolch GB last year. though i think upping the price is fair game once the caps have been produced and distributed to the original buyers
anyone knows how much an OTD Red Alert set with RoW mods would go for?
But not for the kind of transaction I was enacting.definitely not, hence why i shared my similar experience :thumb: just thought your statement of "you might get greedy people who sell for more" is unfair to people who sell for higher prices afterwards (not just vendors), but i can see how i misinterpreted what you said because "selling" is quite ambiguous in that particular context
Ah I was being too heavy handed myself there. I meant that phrase in passing haha, I'll edit though, it could be misinterpreted.But not for the kind of transaction I was enacting.definitely not, hence why i shared my similar experience :thumb: just thought your statement of "you might get greedy people who sell for more" is unfair to people who sell for higher prices afterwards (not just vendors), but i can see how i misinterpreted what you said because "selling" is quite ambiguous in that particular context
just out of curiosity, what new venture necessitated you to drop both the TA and Hyperfuse sets?Dolch too.
Price check, these custom keycaps in many colours. Thick PBT, Cherry profile Row E (Escape key and function row). All new.
Please give me a realistic market clearing price. I have 13 of each.
(Attachment Link) (Attachment Link) (Attachment Link)
good choice, BSP Olivetti is definitely the best commonly available iteration of that color scheme imo. i think photec posted a set of vintage Olivetti once, the best i've ever seen but it isn't within the reach of us plebs. dropping 3 GMK sets for it.. you must like blue a lot :-) saving money is never a bad thing though.
hope you get a good headphone setup that will last a long time. my $800 midfi rig's only been with me for 2 years and i already feel the need to upgrade..
Anyone know the going price for a good-condition SSK?
Anyone know the going price for a good-condition SSK?
A recent batch of filthy SSKs came through Elecplus at about $75/ea.
Binge Lion Keyng - the blue and white marbled one?
https://bingecap.com/product-category/archive/Binge Lion Keyng - the blue and white marbled one?
Whatever he sold it for originally, which was probably between 25 and 35 dollars. If you know the name of it, I'd google it to find it on his store to get a price. Or check your payment history.
$345 for an 55g HHKB type-s, does it sound fair?Yes
Thanks. ;)$345 for an 55g HHKB type-s, does it sound fair?Yes
Price check for IBM Model M M13 Maxiswitch trackpoint keycaps.
(The white on black keycaps, mint condition with no signs of use.)
Someone wants me to build a GON crystal TKL for them, and I know how to do it as I've built one before, but I don't know how much I should charge for labor and stuff. What's a good price without me charging too much as I've never done this for someone before?
How much would a Ducky Shine 3 TKL with MX Reds/Red LEDS stock caps very worn, but good condition otherwise go for?80$
price check bump:mby a little less but solid price
cherry g80-3000 lqceu-0 (beige fullsize cherry mx clears). has thin pbt with actually very good quality lasered legends.
60USD + shipping fair?
Price check please:Poker 2, 80 probably
-KBC Poker 2, thick PBT keys, great condition. Cherry MX RED switches with a blue escape, left control, and backspace switches (did some soldering hehe)
-Griffon powermate in black, great condition.
price check bump:I think it's a reasonable price, however I think it's a very unpopular board. Usually people stick to the older, higher quality Cherry G80s from the 80s, 90s and early 2000s. You might have a tough time selling it, I'm not sure.
cherry g80-3000 lqceu-0 (beige fullsize cherry mx clears). has thin pbt with actually very good quality lasered legends.
60USD + shipping fair?
MX Clear springs: Are they worth a 1::1 swap for 62g springs?No, I sold my clear springs for 6$ shipped and I had 100 of them
price check bump:I think it's a reasonable price, however I think it's a very unpopular board. Usually people stick to the older, higher quality Cherry G80s from the 80s, 90s and early 2000s. You might have a tough time selling it, I'm not sure.
cherry g80-3000 lqceu-0 (beige fullsize cherry mx clears). has thin pbt with actually very good quality lasered legends.
60USD + shipping fair?
I have a PS/2 keyboard with Maxi switches and a DIN-5 keyboard with Keytronic foam and foil switches. Anyone know the value of these?
Assembled phantom PCB and plate, plate style is the same as WhiteFireDragon, and it has ergo clears with stock red springs for the alphas and stock browns everywhere else. It has no case or caps, what would this be worth? Everything works.100 if you are lucky since, the layout won't appeal everybody.
looking to offload my used once ps4. how much do these potatoes go for now?
looking to offload my used once ps4. how much do these potatoes go for now?
I'll give you a bunch of Cherry switches for it :))
looking to offload my used once ps4. how much do these potatoes go for now?
I'll give you a bunch of Cherry switches for it :))
ill take dinner and a movie
how much per switch for cherry mx clear pcb mount switches harvested from a g80 keyboard? year is circa 1994.0,4 ea
I would say it also depends on if they have the jumper wires still in them, those can be a pain to remove.how much per switch for cherry mx clear pcb mount switches harvested from a g80 keyboard? year is circa 1994.0,4 ea
Thank you :thumb:how much per switch for cherry mx clear pcb mount switches harvested from a g80 keyboard? year is circa 1994.0,4 ea
How much does a HHKB Type-S go for?I would say around 290 would be a good price, considering they go for around 300 + shipping from japan on amazon atm
How much for a full keycap set from a Das II ? Black blank POM cherry profile. No apparent shine on them.They've lost quite a lot of value from all the ones that recently sold at $60.. I'd say $50 for a good condition set. If it's really pristine, completely unused.. maybe $100.
How much for a full keycap set from a Das II ? Black blank POM cherry profile. No apparent shine on them.They've lost quite a lot of value from all the ones that recently sold at $60.. I'd say $50 for a good condition set. If it's really pristine, completely unused.. maybe $100.
I doubt taht an unused set would go for 100$ I think that 70 would be more accurate, but that's just my opinion.How much for a full keycap set from a Das II ? Black blank POM cherry profile. No apparent shine on them.They've lost quite a lot of value from all the ones that recently sold at $60.. I'd say $50 for a good condition set. If it's really pristine, completely unused.. maybe $100.
I doubt taht an unused set would go for 100$ I think that 70 would be more accurate, but that's just my opinion.
I am looking to buy a HHKB, but all my attempts have ended with people wanting MORE then buying one new from somewhere like Elite keyboards. How much should a used HHKB really be selling for? (assuming it is in good condition and comes with original box/caps/etc)
I haven't checked on geekhack for a while and, I'm wondering for how much do vintage black switches go for nowadays
I am looking to buy a HHKB, but all my attempts have ended with people wanting MORE then buying one new from somewhere like Elite keyboards. How much should a used HHKB really be selling for? (assuming it is in good condition and comes with original box/caps/etc)
~200 shipped, like moose said. maybe even less depending on how shiny the spacebar is.
Thanks. I saw someone selling them in classifields and I might get them after I get my finances up a lil bit...I haven't checked on geekhack for a while and, I'm wondering for how much do vintage black switches go for nowadays
Typically they sell for $0.25-0.35/switch.
Unless they've been cleaned, lubed, sitckered etc. but even then most people don't want to may too much more for that.
price check G80-1192HAG/00Show Image(http://i.imgur.com/fL8AzUf.jpg)
price check G80-1192HAG/00Show Image(http://i.imgur.com/fL8AzUf.jpg)
That doesn't look like any G80 I've ever seen. More like a Zenith ISO with an AT connection. What switches does it have? I'm guessing Linear Green Alps.
price check G80-1192HAG/00Show Image(http://i.imgur.com/fL8AzUf.jpg)
That doesn't look like any G80 I've ever seen. More like a Zenith ISO with an AT connection. What switches does it have? I'm guessing Linear Green Alps.
Caps are definitely Cherry ABS caps. They posted on DT as well where G80 was confirmed.
How much would a barely used Das Pro S (MX Red) go for?10-15 under normal
The last set of similar Rafi boards I saw on eBay were being sold at $40-60 shipped and no one was biting. I'd say $15-20 + shipping.
I'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseShow Image(http://i.imgur.com/IY3cBNO.jpg)
I doubt taht an unused set would go for 100$ I think that 70 would be more accurate, but that's just my opinion.
People are willing to pay ridiculous exorbitant sums for individual caps :p
I'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseI had one that he made for me because I asked him in advance, and mine cost me 8$ shipped, just like in the sale. I sold it for 30 w/ shipping because somebody offered it to me without me even asking, and then I ran across it in a picture and asked someone about it, and he paid 35 shipped for it.Show Image(http://i.imgur.com/IY3cBNO.jpg)
I'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseShow Image(http://i.imgur.com/IY3cBNO.jpg)
What did you pay for them? That's the value.
I'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseI had one that he made for me because I asked him in advance, and mine cost me 8$ shipped, just like in the sale. I sold it for 30 w/ shipping because somebody offered it to me without me even asking, and then I ran across it in a picture and asked someone about it, and he paid 35 shipped for it.Show Image(http://i.imgur.com/IY3cBNO.jpg)
Yep! Although 8$ is no longer his price for customsI'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseI had one that he made for me because I asked him in advance, and mine cost me 8$ shipped, just like in the sale. I sold it for 30 w/ shipping because somebody offered it to me without me even asking, and then I ran across it in a picture and asked someone about it, and he paid 35 shipped for it.Show Image(http://i.imgur.com/IY3cBNO.jpg)
That's awesome man, I'm jealous - honestly I'd never even thought to message a maker like that (and doubt that I will until I have a more basic understanding of the craft and caps they're making. Thanks for the info
Yep! Although 8$ is no longer his price for customsI'm trying to figure out a rough price estimate on Katz blue/translucent Topre blank (B5 circled in red below, the image is from KatzenKinder's Sale v3.0 Archive post). Does anybody have a general idea about price (to help give me a ballpark for trading value/PayPal offers)? pretty pleaseI had one that he made for me because I asked him in advance, and mine cost me 8$ shipped, just like in the sale. I sold it for 30 w/ shipping because somebody offered it to me without me even asking, and then I ran across it in a picture and asked someone about it, and he paid 35 shipped for it.Show Image(http://i.imgur.com/IY3cBNO.jpg)
That's awesome man, I'm jealous - honestly I'd never even thought to message a maker like that (and doubt that I will until I have a more basic understanding of the craft and caps they're making. Thanks for the info
NIB or used?MoreShow Image(http://i.imgur.com/m9bAnPt.jpg)Show Image(http://i.imgur.com/CCYHYKv.jpg)Show Image(http://i.imgur.com/UU2zIHO.jpg)Show Image(http://i.imgur.com/dTNmKXf.jpg)
Price checky on a G80–2100
Quote don't want to work but,I think that could just be the flash reflecting off it in that area.
@Photekq:Show Image(http://i.imgur.com/m9bAnPt.jpg)
Right part of the spacebar is used.
NIB or used?MoreShow Image(http://i.imgur.com/m9bAnPt.jpg)Show Image(http://i.imgur.com/CCYHYKv.jpg)Show Image(http://i.imgur.com/UU2zIHO.jpg)Show Image(http://i.imgur.com/dTNmKXf.jpg)
Price checky on a G80–2100
Is it yellowed or is that just the white balance?
If used, are there any permanent marks/scratches and are the keycaps shiny at all?
The thing with Cherries is that you have two markets. Sane people and insane people.
If you want to sell to someone sane.. $100-150
If you want to sell to someone insane with more money than sense.. $175-225
NIB ones can sell for about $350. The keys with the LED windows (lock keys and Cherry logo) are pretty valuable on their own.
Trying to buy a an orange bingecap b-stock. 0 concept of what I should be offering.
What can I expect to pay for a blue Alps keyboard in any condition?
What can I expect to pay for a blue Alps keyboard in any condition?
In the US, $50 + shipping is a good deal, and $100 is commonplace.
But there is always the chance of getting lucky. A month ago, Chyros in England got a new-in-box, true-ANSI layout for 5 pounds or something ridiculous like that.
Price check on an NCR G81-3077 case, modded with a G80-3000 MX Black PCB. PS/2 plug and no work on the switches. Marginally yellowed on the right side. Age of components unknown. (Attachment Link) (Attachment Link)I don't understand your idea. Only case or both board?
Caps are doubleshot, so its 100-200$ range or less?I guess 150-200$. Waiting to see photek's idea.
Caps are doubleshot, so its 100-200$ range or less?I'd say $150~. The case on its own is worth $50-75. The PCB is not worth too much. The caps are very rare because of the layout, and I'm sure anyone who uses that layout will really want them, but they're doubleshot and used so probably not worth tonnes.
Price check on oktoberfest clickclack- mx blankAround $100-150 I think, but prices change pretty often.
Price check on oktoberfest clickclack- mx blankAround $100-150 I think, but prices change pretty often.
Welcome to Geekhack by the way, I've seen your pictures on OTD :)
Hi, I just picked up this Model M (Qwertz Lazout) at a local Fleamarket for 4 Euros (YOU CANNOT GO WRONG FOR 4 EUROS XD), and I was wanting to know if anyone knows how much this model is worth ?
I have done some looking on eBay and I tend to find them on eBay, but most of them are made in the UK and not the USA.
I will add photos of the keyboard as well as the sticker on the back of the board.
I was guessing around 30-50 euros ( 32-52 USD).
Many thanks,
HK
Price check on Poker X.
Stock case, mint.
Stock caps, unused.
Brown switches, used but good.
Hi, I just picked up this Model M (Qwertz Lazout) at a local Fleamarket for 4 Euros (YOU CANNOT GO WRONG FOR 4 EUROS XD), and I was wanting to know if anyone knows how much this model is worth ?
I have done some looking on eBay and I tend to find them on eBay, but most of them are made in the UK and not the USA.
I will add photos of the keyboard as well as the sticker on the back of the board.
I was guessing around 30-50 euros ( 32-52 USD).
Many thanks,
HK
Regardless of what people tell you that it's worth I recommend that you keep this board. It's not extremely rare enough to be worth tons of money, but is uncommon enough that if you or some close personal friend should want a German layout model M in future, would save you the time to find one again.
So I would still like to know how much it is worth, or an estimate . :p
So I would still like to know how much it is worth, or an estimate . :p
Depending on condition, manufacturer and age, 40-60€. Can net more on ebay if you properly clean it, take great pictures and write a good item description. Also matters when the auction, if it isn't bin, ends. And so on.
I guess $30 or so just for the pcb
Well, I recently bought a G81-3098SAD for the keycaps. I know these are PBT dyesub, but how much are they really worth?
Well, I recently bought a G81-3098SAD for the keycaps. I know these are PBT dyesub, but how much are they really worth?
I guess $30 or so just for the pcb
Really? I would say AT LEAST retail price, if not a bit extra considering GON's shipping time and he already soldered on the diodes/resistors I'm guessing.
yeah, not many people want to pay $25 shipping from gon to the US, also i have a plate and switches for it.I guess $30 or so just for the pcb
Really? I would say AT LEAST retail price, if not a bit extra considering GON's shipping time and he already soldered on the diodes/resistors I'm guessing.
I'd say so. Add ~20% for scarcity and labor. Don't forget the cost of the switches.
$0.20-0.35 depending on how old they are.Is that for all of them or just a piece?
$0.20-0.35 depending on how old they are.Is that for all of them or just a piece?
What would a bag of around 80 harvested mx blacks be worth? They were harvested from a PLU ML-87 and some have bent pins that I was unable to bend back but they still came out of the PCB so it may or may not be an issue. Also have the tkl plate from that which is orange if it would be worth anything.
What's an Olivetti with ANSI dyesubs worth?
What's an Olivetti with ANSI dyesubs worth?
In my opinion, Olivetti dyesub's worth is hang on its seller's mind.
:)
What's an Olivetti with ANSI dyesubs worth?
In my opinion, Olivetti dyesub's worth is hang on its seller's mind.
:)
Lol. Photekq seems want know value :))
um... I heard Cyrillic Dyesub is around 800$. Olivetti will similar to it.Cyrillic's definitely a lot more valuable than Olivetti. I was thinking much lower :/
Maybe it's more valuable than 1000$.um... I heard Cyrillic Dyesub is around 800$. Olivetti will similar to it.Cyrillic's definitely a lot more valuable than Olivetti. I was thinking much lower :/
Also, this is a set that's been used for 3years+, not a NIB one.
The thing with Cherries is that you have two markets. Sane people and insane people.
It's always really hard quoting prices for those kind of things so I'll just leave this here and move on.:))The thing with Cherries is that you have two markets. Sane people and insane people.
:D
What is Lambda (Half-Life) keycap worth?
What's an Olivetti with ANSI dyesubs worth?I would agree with hzza and azhdar. Considering it is used, I would estimate between $300-$400.
Any idea how much this lynk model m is worth? I know it's missing some caps, but i put in a teensy myself and it's using soarer's converter, i just don't really know how to price it because of the missing caps
Show Image(http://i.imgur.com/54VhzdQ.jpg)
Any idea how much this lynk model m is worth? I know it's missing some caps, but i put in a teensy myself and it's using soarer's converter, i just don't really know how to price it because of the missing caps
The only seriously missing ones are the 1.5u Alt
Idea on how much forYou can see prices on ctrlalt.io
- Toxic alphas
- Toxic modifiers
- Toxic deluxe extras
thanks in advance
price check: Blood splat cc
price check: Blood splat cc
Wrong thread.
Well, my english skill is poor. What did i do something wrong?
What is Lambda (Half-Life) keycap worth?
what is a stock black plastic realforce case worth?
what is a stock black plastic realforce case worth?20-30 ?
note the question mark. However I think 30 $ for a plastic case is pretty good...what is a stock black plastic realforce case worth?20-30 ?
was hoping a little more but ok
Which models are these?
http://static.limundoslike.com/originalslika_tastature-2-kom-80914945.jpg
Thx
Which models are these?Yeah, G81-3000HAU as Nover said. They look really, really shiny so they're not worth much. Maybe $25 max each or something.
http://static.limundoslike.com/originalslika_tastature-2-kom-80914945.jpg
Thx
Working Model M2 with Greek ISO layout.Show Image(http://i.imgur.com/azuam9i.jpg)
i have a corsair k95, non-rgb, white backlit, with the old badge style and black vortex pbt/pom backlit keys and max keyboard 50A, 0.4mm o-rings.
think i could get $100 for this? i am hoping to sell/trade this and some pp for a filco. any suggestions?
i have a corsair k95, non-rgb, white backlit, with the old badge style and black vortex pbt/pom backlit keys and max keyboard 50A, 0.4mm o-rings.
think i could get $100 for this? i am hoping to sell/trade this and some pp for a filco. any suggestions?
i have a corsair k95, non-rgb, white backlit, with the old badge style and black vortex pbt/pom backlit keys and max keyboard 50A, 0.4mm o-rings.
think i could get $100 for this? i am hoping to sell/trade this and some pp for a filco. any suggestions?
You could try, but Corsair is not popular around here, due to the non-standard bottom row. Maybe try r/MechMarket?
i have a corsair k95, non-rgb, white backlit, with the old badge style and black vortex pbt/pom backlit keys and max keyboard 50A, 0.4mm o-rings.
think i could get $100 for this? i am hoping to sell/trade this and some pp for a filco. any suggestions?
You could try, but Corsair is not popular around here, due to the non-standard bottom row. Maybe try r/MechMarket?
ya, the plan is to dump it on r/mechmarket, but there's no price check thread there. i have had this board for a couple years, and after opening it up to see what i can mod... i was disgusted. hoping to replace it with a filco convertible for use with htpc.
so... think i score $100 from this, or am i dreaming?
What's a kmac LE with lubed and stickered mx reds going for nowadays?300$ or little than. I think.
I have a CM QFR Cherry MX Blue board. My dog recently had an "accident" on it. Came home the next day and found it that way. Took everything apart to clean, but putting it back together majority of keys don't function, small amount do however. Case isn't stock color, plasti-dipped red. Any estimate on what it's worth for purely salvage/parts? Thinking of selling possibly and wanted to check. Thanks!
I have a CM QFR Cherry MX Blue board. My dog recently had an "accident" on it. Came home the next day and found it that way. Took everything apart to clean, but putting it back together majority of keys don't function, small amount do however. Case isn't stock color, plasti-dipped red. Any estimate on what it's worth for purely salvage/parts? Thinking of selling possibly and wanted to check. Thanks!Your username is pretty fitting
Pink RF blanks for HHKB arrows & esc?
Pink RF blanks for HHKB arrows & esc?
I have seen people pay up to $40 usd for them.. But that is too high for me personally. If you are buying, watch out. There was someone on /r/mechmarket who scammed several people with some a few months ago.
Pink RF blanks for HHKB arrows & esc?
I have seen people pay up to $40 usd for them.. But that is too high for me personally. If you are buying, watch out. There was someone on /r/mechmarket who scammed several people with some a few months ago.
Oh wow, that's quite a bit.
But it's all good, I'm considering selling mine. I thought it would look good on my HHKB along with the red ctrl/blue esc kit, but the colours just clash too much for me.
Pink RF blanks for HHKB arrows & esc?
I have seen people pay up to $40 usd for them.. But that is too high for me personally. If you are buying, watch out. There was someone on /r/mechmarket who scammed several people with some a few months ago.
Oh wow, that's quite a bit.
But it's all good, I'm considering selling mine. I thought it would look good on my HHKB along with the red ctrl/blue esc kit, but the colours just clash too much for me.
Oh nice, the only reason that some people were paying more is that they are hard to come by. That was more people who were desperate though. I don't think most people would pay that much!
Got offered a trade and wasn't sure how fair it was...For what?
Granite DSA PMK groupbuy
core set, icon modifiers set, numpad set, icon pro modifiers set, multimedia key set, blue enter keys, 1 extra PBT spacebar of each size, lost and found kit
Got offered a trade and wasn't sure how fair it was...For what?
Granite DSA PMK groupbuy
core set, icon modifiers set, numpad set, icon pro modifiers set, multimedia key set, blue enter keys, 1 extra PBT spacebar of each size, lost and found kit
Got offered a trade and wasn't sure how fair it was...For what?
Granite DSA PMK groupbuy
core set, icon modifiers set, numpad set, icon pro modifiers set, multimedia key set, blue enter keys, 1 extra PBT spacebar of each size, lost and found kit
HHKB pro 2, but I have other keycap sets coming in so odds that I keep it are lowish. Want to be sure that if i don't i can get equal worth out of them. Wouldn't be a straight up trade.
IBM Standard 104-Key Keyboard
What can I get for GMK Dolch + Color Pack + CMYW Modifiers?
I have a 2 for 1 question to ask, if someone could help me out.In the artisan services you can find people offering soldering services.
How much should i expect to pay for enough Gateron Clears or maybe ergo-clears to cover a pok3r?
How much do you think it would cost for me to have someone replace the blacks on my pok3r with the clears?
Ok. Around 0.2$/switchVintage brown switch?
I've sold 190 of them for $40 before
Filco case at normal condition?$40-$50? They are handy for people building a phantom.
Viper is worth around 400$, so I think Eagle is same ^-^
what is a Dolch Pac Case worth?
what is a new g81-1800 Black Case worth?
Viper is worth around 400$, so I think Eagle is same ^-^
A viper sold for $450 a few days ago, but in my opinion an Eagle would be a little less. There was one being sold by Apoc for around $350 fairly recently.
How much are yellowed and dirty Wyse Wy-30 keycaps sets worth? I have about 29 sets that I need to get rid off.
Not keyboard related.. Any ideas what this PC would be worth? I need a new, smaller PC for university.
Should note that it would be sold within the UK, where PC parts are more expensive than in the US.
Hard drives wouldn't be included. Pics and specs here : http://i.imgur.com/uk83m4l.jpg
Maybe $600 on a good day. That's all pretty old stuff. You'd probably get more parting it out.Really? Jesus christ... That's some very real loss of value.
Maybe $600 on a good day. That's all pretty old stuff. You'd probably get more parting it out.Really? Jesus christ... That's some very real loss of value.
Maybe $600 on a good day. That's all pretty old stuff. You'd probably get more parting it out.Really? Jesus christ... That's some very real loss of value.
Not keyboard related.. Any ideas what this PC would be worth? I need a new, smaller PC for university.
Should note that it would be sold within the UK, where PC parts are more expensive than in the US.
Hard drives wouldn't be included. Pics and specs here : http://i.imgur.com/uk83m4l.jpg
Also, does anyone know where I might try and sell it? A forum if possible.. The computer forum I was a member of has apparently closed down since the last time I visited it :/
I got in the $120 range for excellent similar S3s (locked Sprint, original box and accessories) last winter.
Check out swappa. You can get an extremely good idea on value, and is much better than CL, imo.I got in the $120 range for excellent similar S3s (locked Sprint, original box and accessories) last winter.
I am going to put them up at $150 each (I have 2) on CL and see what happens.
I know it's been asked a million times but how much is a KMAC Mini worth? In my head I was thinking $400-$500 but I'm not sure.
prob over 600$ tbhI know it's been asked a million times but how much is a KMAC Mini worth? In my head I was thinking $400-$500 but I'm not sure.
From what I understand I think that's fair. Perhaps a little more depending on quality of assembly and how desperate the buyer is, but nothing over $600.
prob over 600$ tbhI know it's been asked a million times but how much is a KMAC Mini worth? In my head I was thinking $400-$500 but I'm not sure.
From what I understand I think that's fair. Perhaps a little more depending on quality of assembly and how desperate the buyer is, but nothing over $600.
where? they are hot sh*t right now and they go for over 650 in chinaprob over 600$ tbhI know it's been asked a million times but how much is a KMAC Mini worth? In my head I was thinking $400-$500 but I'm not sure.
From what I understand I think that's fair. Perhaps a little more depending on quality of assembly and how desperate the buyer is, but nothing over $600.
Two sold recently for 450-500 USD + shipping
Red octagon w/ stickered and clear top clearsWhat color are the stickers?
RedRed octagon w/ stickered and clear top clearsWhat color are the stickers?
I'm gonna be a real **** and ask how much a Board Blue Brobot is worth... MX...
How about Octagon price , i really interested in this but it difficult to find :(I bought an unassembled kit for 380, so assembled is probably upwards of 400
But it is hard to find someone who want to sell it, especially Silver and Blue Grey.How about Octagon price , i really interested in this but it difficult to find :(I bought an unassembled kit for 380, so assembled is probably upwards of 400
Aight what's a 356 pad worth? I'd want a black or grey one but honestly I don't care all that much.350-400 I think :) Meiosis had one for sale not so long ago afaik
Didn't Bro Caps just sell his for $475?Aight what's a 356 pad worth? I'd want a black or grey one but honestly I don't care all that much.350-400 I think :) Meiosis had one for sale not so long ago afaik
His was Khaki, anyone know if that color is rarer than the others?Didn't Bro Caps just sell his for $475?Aight what's a 356 pad worth? I'd want a black or grey one but honestly I don't care all that much.350-400 I think :) Meiosis had one for sale not so long ago afaik
I think he got $450 plus he included a bronad in gold
Oh cool!Didn't Bro Caps just sell his for $475?Aight what's a 356 pad worth? I'd want a black or grey one but honestly I don't care all that much.350-400 I think :) Meiosis had one for sale not so long ago afaik
I think he got $450 plus he included a bronad in gold
NIB condition dolch board
They seem to sell on ebay for $130 shipped in varying conditions. I'd say asking $150 or maybe more would be fair
do people even buy terminal m's?
How much is a Gxx-xxxx with Cherry MY switches in this layout worth? Very clean condition and the original double shot caps. It has the older black stems as well i believeIn that exact layout? Doubleshot 1800s with 1u bottom rows like that are quite hard to come by, and if it's ANSI it's very rare indeed.Show Image(http://i.imgur.com/tjmKIiu.jpg)
How much is a Gxx-xxxx with Cherry MY switches in this layout worth? Very clean condition and the original double shot caps. It has the older black stems as well i believeIn that exact layout? Doubleshot 1800s with 1u bottom rows like that are quite hard to come by, and if it's ANSI it's very rare indeed.Show Image(http://i.imgur.com/tjmKIiu.jpg)
A Koala? I've never seen one for sale.dude they are sacred...
I have 120 Cherry MX Clears I desoldered from an old cherry keyboard. How much can I ask for them?prob 0.3$ per switch
I have 120 Cherry MX Clears I desoldered from an old cherry keyboard. How much can I ask for them?prob 0.3$ per switch
How much is my geekhack account worth? Start off with thousands of posts, able to post straight to classifieds with a history of credibility. Enjoy getting straight to the scamming!treefiddy per post
red zombroOriginal pricing
spirit blue v2 bro
unicorn blood v2 bro
ice ice baby bro v2
Anyone know how much a v2 brobot in Orange is worth?
55g swapped HHKB with hasu's non Bluetooth controller and my order of CTRL ALT sliders?
Is there still a market for filco cases? and if so, how much?
55g swapped HHKB with hasu's non Bluetooth controller and my order of CTRL ALT sliders?
I sold my 55g HHKB Pro 2 Type-S for about $360. I would say that a normal one would go for $280-300. You can add $35 for the controller. I think the sliders could go something like $30-50.
Then you are right. I wasn't really sure about the price of the sliders to be honest.55g swapped HHKB with hasu's non Bluetooth controller and my order of CTRL ALT sliders?
I sold my 55g HHKB Pro 2 Type-S for about $360. I would say that a normal one would go for $280-300. You can add $35 for the controller. I think the sliders could go something like $30-50.
I thought the sliders sold for $15 in the recent GB and I thought I remember Bunny saying that they would be around that price once the store is back up. I could be wrong though.
If I were to buy a k70 rgb and swap the switches for gaterons, how much would that be worth? I'd like to get some clear housing cherry switches. Or is there a group buy for those somewhere?There was one for the clear switch housing but it ended. Look in the group buy section perhaps Shadovved still has some spare.
I've got a KMAC2 with stickered, lubed, clear top 62g clears. What would be the going rate these days?
Did they go back up to $200? The last few I saw sell were in the $150 range.
I have a nice clean IBM Model M SSK fully bolt-modded, complete, and operational with a few very small random dings as are always found.
It is a 1987 model 1391472 and I could use the cash if I could get the right price for it.
They seem to be selling in the low-mid-$200 range without the cleaning and bolt-mod.
Would $250 be fair?
Price check for a GON NS Nerd Crystal w/ stock MX Blacks?
Here's an album of it being built
http://imgur.com/a/Halto
MX black used?
I have a nice clean IBM Model M SSK fully bolt-modded, complete, and operational with a few very small random dings as are always found.
It is a 1987 model 1391472 and I could use the cash if I could get the right price for it.
They seem to be selling in the low-mid-$200 range without the cleaning and bolt-mod.
Would $250 be fair?
250 shipped would be more then fair, having been looking for them around 250 is about what I've found
I have a nice clean IBM Model M SSK fully bolt-modded, complete, and operational with a few very small random dings as are always found.
It is a 1987 model 1391472 and I could use the cash if I could get the right price for it.
They seem to be selling in the low-mid-$200 range without the cleaning and bolt-mod.
Would $250 be fair?
250 shipped would be more then fair, having been looking for them around 250 is about what I've found
I'd have to agree. A clean SSK can go for $150-200, so I think $250 for a bolt-modded SSK (especially if performed by fohat himself - he does good work) is fair. Pricey and out of my range, but fair.
Note that I haven't kept up with prices the last couple months, so the market may have changed, though that's doubtful. :P
I have a nice clean IBM Model M SSK fully bolt-modded, complete, and operational with a few very small random dings as are always found.
It is a 1987 model 1391472 and I could use the cash if I could get the right price for it.
They seem to be selling in the low-mid-$200 range without the cleaning and bolt-mod.
Would $250 be fair?
250 shipped would be more then fair, having been looking for them around 250 is about what I've found
I'd have to agree. A clean SSK can go for $150-200, so I think $250 for a bolt-modded SSK (especially if performed by fohat himself - he does good work) is fair. Pricey and out of my range, but fair.
Note that I haven't kept up with prices the last couple months, so the market may have changed, though that's doubtful. :P
This SSK (http://"https://geekhack.org/index.php?topic=70655.0") has been for sale for a while and it's not selling for 215$ (not including shipping), so I guess one that is bolt modded would go for a little more.
I have a nice clean IBM Model M SSK fully bolt-modded, complete, and operational with a few very small random dings as are always found.
It is a 1987 model 1391472 and I could use the cash if I could get the right price for it.
They seem to be selling in the low-mid-$200 range without the cleaning and bolt-mod.
Would $250 be fair?
250 shipped would be more then fair, having been looking for them around 250 is about what I've found
I'd have to agree. A clean SSK can go for $150-200, so I think $250 for a bolt-modded SSK (especially if performed by fohat himself - he does good work) is fair. Pricey and out of my range, but fair.
Note that I haven't kept up with prices the last couple months, so the market may have changed, though that's doubtful. :P
This SSK (http://"https://geekhack.org/index.php?topic=70655.0") has been for sale for a while and it's not selling for 215$ (not including shipping), so I guess one that is bolt modded would go for a little more.
That one is hard to as its in AUS, with like 50$ in shipping to the US
And also it's a 92 rather than an 87..
Blackout Stump ?
Blackout Stump ?
Blackout Stump ?
$26 retail I think. not worth 120 imo
2 cosmos sale v2s for an ashen v2?
I think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
I think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
invader I would caution against a 2:1 trade unless its a rare cap with known documented worth and trades(I guess a known going rate). I guess I could see 2:1 for a rare reaper or something. Ashen is a beautiful cap but there are quite a few of them out there. Maybe ask the person if there is a 1:1 cap they are looking for and maybe try to find that .... Just my opinion take it with a grain of saltI think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
Someone's offering me a full Commodore 64 system, keyboard, monitor and all for $80. Worth? I only really want the keyboard, so I'll probably try to sell the Monitor and Disk Drive, but do you guys think anyone will bite for this?
Black KPad?
5 month old th600 headphones
invader I would caution against a 2:1 trade unless its a rare cap with known documented worth and trades(I guess a known going rate). I guess I could see 2:1 for a rare reaper or something. Ashen is a beautiful cap but there are quite a few of them out there. Maybe ask the person if there is a 1:1 cap they are looking for and maybe try to find that .... Just my opinion take it with a grain of saltI think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
Yeah I would say turn it down, always think if you think its worth it then it is, but I wouldn't go 2.1 unless its super rare Ashen will pop up eventually though hope mine makes it you you safely :pinvader I would caution against a 2:1 trade unless its a rare cap with known documented worth and trades(I guess a known going rate). I guess I could see 2:1 for a rare reaper or something. Ashen is a beautiful cap but there are quite a few of them out there. Maybe ask the person if there is a 1:1 cap they are looking for and maybe try to find that .... Just my opinion take it with a grain of saltI think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
I figured as much and turned him down, still cannot find another Ashen though :/
The caps definitely look hall effect, the switches seem it as well with the square mount and forward angled stem. If it is in fact hall effect, $60 seems somewhat fair. The switches are obviously highly sought after but someone will have to go through the trouble to convert it.What is this worth?wow, cool to see someone else with one of those massive xerox boards. What switches are those?
I know their linear, and I think someone mentioned that they were hall effect once. I am selling this, thinking about 60$. That a good price?
It's in Chicago! Sooon! Im stoked!, and I think yours is between countries right now :DYeah I would say turn it down, always think if you think its worth it then it is, but I wouldn't go 2.1 unless its super rare Ashen will pop up eventually though hope mine makes it you you safely :pinvader I would caution against a 2:1 trade unless its a rare cap with known documented worth and trades(I guess a known going rate). I guess I could see 2:1 for a rare reaper or something. Ashen is a beautiful cap but there are quite a few of them out there. Maybe ask the person if there is a 1:1 cap they are looking for and maybe try to find that .... Just my opinion take it with a grain of saltI think I agree, andromeda skies seems rare and I don't wanna give up that and an interstellar for one :/ I just don't know when I am gonna get another opportunity for an ashen and I have hack'd coming in next week :/2 cosmos sale v2s for an ashen v2?
I would trade Cosmos V2s and Ashen V2 1-for-1, but maybe that's just me.
I figured as much and turned him down, still cannot find another Ashen though :/
Wondering how much I could get for these thick PBT keys from IMSTO
http://imgur.com/fcepPOc&4QNFhD5#1
I didn't see any recent sales of these keycaps but my initial thought was about $80
anyone know how much a poker 2 keyboard case is worth
i have the pexon none cnc case and the original black plastic
Hyper Fuse DCS Base + Number pad + ISO + Tsngan? Tsangan? Price range used but as far as I can tell no shine, or very little if that had replacement space bars too only thing missing is the geekhack keys from the tsngan set otherwise complete
Okay so maybe $110-$100 shipped would be pretty fair price thenHyper Fuse DCS Base + Number pad + ISO + Tsngan? Tsangan? Price range used but as far as I can tell no shine, or very little if that had replacement space bars too only thing missing is the geekhack keys from the tsngan set otherwise complete
New (or unused) = original price + original shipping + reshipping
Used good (no shine, not starting to shine) = ((original price + original shipping)/5-10%) + reshipping
Used fair (starting to shine, some shine) = ((original price + original shipping)/10-20%) + reshipping
That's my general guideline for cap valuations. The original price was $135, it's been used, so I'd say $122 + original shipping + reshipping is a fair price. Of course, it may be less desirable now that GMK Hyperfuse is about to start shipping, so you may have to drop the price some to get it sold.
More than fair, IMO.cool just managed to sell it after only having it up a hour O>O shipped it free for the in the UK everything worked out great :)
And I really should redo that to read *.95 to .90 or *.90 to .80
Unicomp Customizer 104
Rosewill RK-9000 (MX Blue)
CM Storm QuickFire Stealth (MX Green)
Pok3r White (MX Blue)
All boards are in excellent/pretty much new condition.
how much are jugemental skulls usually?
Hey guys, anyone have a blue 2u dsa cap that they can give me or sell me or trade? really need one for a plank and don't have one that matches the keyset for it(first world problem i know)?
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
Cherry MX5000 keyboard?600-700$ ANSI
Cherry MX5000 keyboard?What condition?
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
I would just sell it for what you paid, not like it's rare or hard to find at this point. I would not be surprised if it ran again before the end of the year.
Looks like it is in good shape to me, seller says great condition.Cherry MX5000 keyboard?What condition?
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
I would just sell it for what you paid, not like it's rare or hard to find at this point. I would not be surprised if it ran again before the end of the year.
well i bought it from someone as complete sets
so i do not know the original cost of the common kit
so hoping someone can tell me the original price will help me
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
I would just sell it for what you paid, not like it's rare or hard to find at this point. I would not be surprised if it ran again before the end of the year.
well i bought it from someone as complete sets
so i do not know the original cost of the common kit
so hoping someone can tell me the original price will help me
Pretty sure the common kit was around 30$.
I am trying to sell Granite common kit, can someone tell me how much it is worth? its brand new
I would just sell it for what you paid, not like it's rare or hard to find at this point. I would not be surprised if it ran again before the end of the year.
well i bought it from someone as complete sets
so i do not know the original cost of the common kit
so hoping someone can tell me the original price will help me
A pretty nice one just sold on eBay for $560.Looks like it is in good shape to me, seller says great condition.Cherry MX5000 keyboard?What condition?
Hey guys, need some help. I have some Topre gear I want to sell to help fund my Fallout build, so I want to price them to sell.
All caps have been freshly cleaned
HHKB Pro 2 with red caps. One thing, the controller is broken so it needs a new one. I know you can get them, but I just want to get rid of it as I don't use it/ plan to use it any time soon. It does have some marks on it, but nothing massive.Show Image(http://i.imgur.com/0teoQ76h.jpg)
Random assortment of black Topre caps, not quite enough to fill a HHKB, few top row caps missingShow Image(http://i.imgur.com/rfeSORFh.jpg)
Random assortment of red Topre capsShow Image(http://i.imgur.com/ZUgfUSJh.jpg)
Topre mount CC (Hardcore White?)Show Image(http://i.imgur.com/EzRcYVFh.jpg)Show Image(http://i.imgur.com/0vkQY5dh.jpg)
Topre mount CC (EK Blue?)Show Image(http://i.imgur.com/dR5RQ39h.jpg)Show Image(http://i.imgur.com/rb91rqqh.jpg)Show Image(http://i.imgur.com/6HhJE6Oh.jpg)
As above, I want to price these to sell, I'm not looking at crazy money for the clacks
Hey guys, need some help. I have some Topre gear I want to sell to help fund my Fallout build, so I want to price them to sell.
All caps have been freshly cleaned
HHKB Pro 2 with red caps. One thing, the controller is broken so it needs a new one. I know you can get them, but I just want to get rid of it as I don't use it/ plan to use it any time soon. It does have some marks on it, but nothing massive.Show Image(http://i.imgur.com/0teoQ76h.jpg)
Random assortment of black Topre caps, not quite enough to fill a HHKB, few top row caps missingShow Image(http://i.imgur.com/rfeSORFh.jpg)
Random assortment of red Topre capsShow Image(http://i.imgur.com/ZUgfUSJh.jpg)
Topre mount CC (Hardcore White?)Show Image(http://i.imgur.com/EzRcYVFh.jpg)Show Image(http://i.imgur.com/0vkQY5dh.jpg)
Topre mount CC (EK Blue?)Show Image(http://i.imgur.com/dR5RQ39h.jpg)Show Image(http://i.imgur.com/rb91rqqh.jpg)Show Image(http://i.imgur.com/6HhJE6Oh.jpg)
As above, I want to price these to sell, I'm not looking at crazy money for the clacks
[/quote
Dunno much, and this might be better to go in the clack valuation thread, but the white one might be around $100, and the blue, which is a factory second, would go for a bit less (Cause quality)
This giveaway-exclusive Red Trooper HKP. Definitely not planning on selling it, just wondering.Show Image(http://i.imgur.com/apEB95X.jpg)
This giveaway-exclusive Red Trooper HKP. Definitely not planning on selling it, just wondering.Show Image(http://i.imgur.com/apEB95X.jpg)
The problem with asking for artisan cap values is that they can vary so much. I really discourage people from asking about it in this thread. If you really need to know, ask in the artisan's forum. Otherwise, the standard answer is "retail price."
Thats about what I was thinking for the random caps.
This giveaway-exclusive Red Trooper HKP. Definitely not planning on selling it, just wondering.Show Image(http://i.imgur.com/apEB95X.jpg)
The problem with asking for artisan cap values is that they can vary so much. I really discourage people from asking about it in this thread. If you really need to know, ask in the artisan's forum. Otherwise, the standard answer is "retail price."
oook, es tut mir leid.
Thats about what I was thinking for the random caps.
If those random caps are of various profiles, I'd be interested in them. :thumb:
Interested as well :) Sent you a PMThats about what I was thinking for the random caps.
If those random caps are of various profiles, I'd be interested in them. :thumb:
They are a mix of different profiles Hoff yes dude, send me a PM over
What do you guys think a non-RGB K95 that has had it's switches swapped out with blues be worth?
What do you guys think a non-RGB K95 that has had it's switches swapped out with blues be worth?
Next to nothing, because blues are terribad. :P
But probably $60-65?
Cherry brown springs (150 of them) and OG (6.25) black cherry spacebar?
Matias Quiet Pro, ANSI in the UK. Couple of scuffs on the case. Works sweetly.
Stock Cherry G80-1800 PCB (winkey layout) with MX blacks and black POM keycaps with white laser-infilled legends. Bought the board brand-new for the case.
CCNG, Sanctuary, Palm with logo cherry (Brown) ?
Harvested Alps SKCM White switches?
Not imagining a whole lot but maybe the labor of removing them would be worth something?
Stock Cherry G80-1800 PCB (winkey layout) with MX blacks and black POM keycaps with white laser-infilled legends. Bought the board brand-new for the case.
You could probably get $35 or so for it. Someone might be looking for that combination of things. :)
Stock Cherry G80-1800 PCB (winkey layout) with MX blacks and black POM keycaps with white laser-infilled legends. Bought the board brand-new for the case.
You could probably get $35 or so for it. Someone might be looking for that combination of things. :)
I'd have to think I could get more for the caps and the desoldered switches sold separately. Scrap the PCB or use it for something else...
Topre Drunken Skull CC?
How much is a new bolt modded SSK worth, and a used bolt modded model m (standard one that is most common) 1993?probably around $160-$200
How much is a new bolt modded SSK worth, and a used bolt modded model m (standard one that is most common) 1993?probably around $160-$200
oh sorry, I guess I'm tired lol, didn't even see the two things. That would be for the SSKHow much is a new bolt modded SSK worth, and a used bolt modded model m (standard one that is most common) 1993?probably around $160-$200
For the SSK, or the regular model m?
Clack Factory MX Bluetrabe... I have one, never hear anyone talking about them, just wondering what its worth?https://geekhack.org/index.php?topic=59608.0 (https://geekhack.org/index.php?topic=59608.0)
Clack Factory MX Bluetrabe... I have one, never hear anyone talking about them, just wondering what its worth?How about my slightly tarnished virginity :)) I love that freaking cap I wish it was more common as I will probably never have a chance to get one 8-/
Thank you, I thought I was in that thread... My badClack Factory MX Bluetrabe... I have one, never hear anyone talking about them, just wondering what its worth?How about my slightly tarnished virginity :)) I love that freaking cap I wish it was more common as I will probably never have a chance to get one 8-/
On a serious note it is a pretty awesome cap and there does not seem to be a whole lot of them so I imagine quite a bit 8bit. JD seems to be pretty good at halfway accurate estimates. (There's a large element of subjectivity involved) congrats on a really cool cap !!!!
Thank you, this was the first cap I entered to win and am very pleased I won it.Clack Factory MX Bluetrabe... I have one, never hear anyone talking about them, just wondering what its worth?https://geekhack.org/index.php?topic=59608.0 (https://geekhack.org/index.php?topic=59608.0)
What would be one of these guy worth? It's mechanical, all switches are MX Blacks.MoreShow Image(http://abload.de/img/_57kzscx.jpg)
I mean, it got some nice caps.
Topre Bro Stump? :3
Selling = retail, buying you will probably be paying more than 100What would be one of these guy worth? It's mechanical, all switches are MX Blacks.MoreShow Image(http://abload.de/img/_57kzscx.jpg)
I mean, it got some nice caps.
Maybe $100 if you're lucky. The caps are nothing special and not many people really want those boards outside of making a switch tester.Topre Bro Stump? :3
Retail.
What would be one of these guy worth? It's mechanical, all switches are MX Blacks.MoreShow Image(http://abload.de/img/_57kzscx.jpg)
I mean, it got some nice caps.
Maybe $100 if you're lucky. The caps are nothing special and not many people really want those boards outside of making a switch tester.
nebulus bbv2?
How about a G80-2100HDD ISO DE :What kind of condition are they in? Especially the keycaps.. Any yellowing/shine?Show Image(http://i.imgur.com/xNnsv18.jpg)
and a Zenith Branded G80-1192HAG ISO UK with integrated beeper:Show Image(http://i.imgur.com/48KcmVz.jpg)
Both come with doubleshots, mx black and NKRO.
KBK Mummy II?Those are priceless.
KBK Mummy II?imo they are seriously one of my favorite key caps granted it was a colorway I loved I would take a mummy over a clack and not look back!!
Roughly how much for a MX Drunken Clack I need an answer fairly quick if anyone can help?
thanks Az i m on mobile and for some reason thought I was in that threadRoughly how much for a MX Drunken Clack I need an answer fairly quick if anyone can help?
https://geekhack.org/index.php?topic=59608.0
Bro Set by CtrlAlt? Set is missing one of the function row purple on black "brofist" and black on purple "eyes" caps (I got the set without them), but is otherwise complete. Includes a spare S cap.
White on Black cherry double shot set (1800?). Lots of shine :thumb:. Will also include a white on black SP modifier pack to make the set TKL/full size compatible.
Bro Set by CtrlAlt? Set is missing one of the function row purple on black "brofist" and black on purple "eyes" caps (I got the set without them), but is otherwise complete. Includes a spare S cap.
White on Black cherry double shot set (1800?). Lots of shine :thumb:. Will also include a white on black SP modifier pack to make the set TKL/full size compatible.
Bro Set sold for $90, I would say you should be able to sell it for a little less, since it is used and missing two caps, maybe $80? Not sure about the WoB
Trying to buy a BBV1 Brobot V1, what should I look to pay? Don't care about color, just want one.
Anyone know a realistic price for a Realforce 10th AE?Used in excellent condition around $325 give or take
Anyone know a realistic price for a Realforce 10th AE?Used in excellent condition around $325 give or take
I think its a niche product and the price is pretty subjective. I bought one as I really love the board and the 10AE colors. I guess in Japan they are around $80-$100 cheaper then the eBay price.Anyone know a realistic price for a Realforce 10th AE?Used in excellent condition around $325 give or take
Would you say the new ones on eBay are priced accordingly (~$385)?
JD45 with a carbon fiber case and blue alps?
Alright, I'll see what I come up with/ what it costs me.JD45 with a carbon fiber case and blue alps?
The blue alps are very rare aren't they?
I'd gander over at $200+ range, if not more.
(And if you're selling I could be interestedLet me know if you get a price?)
Just trying to get fair estimates on some of the items I have for sale:The Granite set you have up on your listing is fairly priced, I think, especially considering the amount of sets that are in it. I think the only thing that's making it difficult to sell is that some people may only be interested in certain kits and not the entire lot?
1) GMK Triumph Adler set. My set came fully intact in the tray (nothing loose). No missing or duplicate keys. No scratches on any of the keys. set comes with the standard manufacturing defects I'm sure you heard about. The long shift has some swirl issues. Iso enter and numpad + have some "missing" plastic on the underside. However the set, besides the swirl, is aesthetically perfect. (Obviously no shine considering the use and no scratching).
I'm hoping to get close to what I paid for it so I'm looking for $130 for that one but given the lower quality of this set compared to others, has that impacted the price heavily?
2) Panasonic Camera Bundle.
What's included:
Original Boxes for the camera and both lenses.
Lens caps for both lenses, camera, etc.
Panasonic G5 Camera body (about 6/10 condition if I'm being very conservative. Used this a lot and has some paint scratches on the bottom. Discontinued but $300ish new).
Panasonic Leica 45mm F/2.8 Macro Lens ($900 new)
Panasonic 14-140mm F/3.5-5.6 Super zoom Lens ($560 new)
Original battery and charger
One lens bag.
Not sure if this is the right place to ask for that one =(
3) Granite R1. This is the original Granite offering. The legendary PBT Dye-Sub Granite. Comes with the following sets: base kit, numpad, enter kit, 2 sets of basic icon mods (no pro), Thank You SP set (ABS), and lost and found (this set is full of win). I have a dark gray 7u DSA spacebar in there too.
There have been so many drops for granite and since I owned it I never bothered lookign at the prices for the group buys or the aftermarket prices
Thanks
Just trying to get fair estimates on some of the items I have for sale:The Granite set you have up on your listing is fairly priced, I think, especially considering the amount of sets that are in it. I think the only thing that's making it difficult to sell is that some people may only be interested in certain kits and not the entire lot?
1) GMK Triumph Adler set. My set came fully intact in the tray (nothing loose). No missing or duplicate keys. No scratches on any of the keys. set comes with the standard manufacturing defects I'm sure you heard about. The long shift has some swirl issues. Iso enter and numpad + have some "missing" plastic on the underside. However the set, besides the swirl, is aesthetically perfect. (Obviously no shine considering the use and no scratching).
I'm hoping to get close to what I paid for it so I'm looking for $130 for that one but given the lower quality of this set compared to others, has that impacted the price heavily?
2) Panasonic Camera Bundle.
What's included:
Original Boxes for the camera and both lenses.
Lens caps for both lenses, camera, etc.
Panasonic G5 Camera body (about 6/10 condition if I'm being very conservative. Used this a lot and has some paint scratches on the bottom. Discontinued but $300ish new).
Panasonic Leica 45mm F/2.8 Macro Lens ($900 new)
Panasonic 14-140mm F/3.5-5.6 Super zoom Lens ($560 new)
Original battery and charger
One lens bag.
Not sure if this is the right place to ask for that one =(
3) Granite R1. This is the original Granite offering. The legendary PBT Dye-Sub Granite. Comes with the following sets: base kit, numpad, enter kit, 2 sets of basic icon mods (no pro), Thank You SP set (ABS), and lost and found (this set is full of win). I have a dark gray 7u DSA spacebar in there too.
There have been so many drops for granite and since I owned it I never bothered lookign at the prices for the group buys or the aftermarket prices
Thanks
(That being said, if you ever decide to split, I'd be interested in the numpad haha)
I think your price is fair. From what I've seen on Reddit, people selling the base + numpad + 1 or 2 other kits usually get buys at $120-130. :)Just trying to get fair estimates on some of the items I have for sale:The Granite set you have up on your listing is fairly priced, I think, especially considering the amount of sets that are in it. I think the only thing that's making it difficult to sell is that some people may only be interested in certain kits and not the entire lot?
1) GMK Triumph Adler set. My set came fully intact in the tray (nothing loose). No missing or duplicate keys. No scratches on any of the keys. set comes with the standard manufacturing defects I'm sure you heard about. The long shift has some swirl issues. Iso enter and numpad + have some "missing" plastic on the underside. However the set, besides the swirl, is aesthetically perfect. (Obviously no shine considering the use and no scratching).
I'm hoping to get close to what I paid for it so I'm looking for $130 for that one but given the lower quality of this set compared to others, has that impacted the price heavily?
2) Panasonic Camera Bundle.
What's included:
Original Boxes for the camera and both lenses.
Lens caps for both lenses, camera, etc.
Panasonic G5 Camera body (about 6/10 condition if I'm being very conservative. Used this a lot and has some paint scratches on the bottom. Discontinued but $300ish new).
Panasonic Leica 45mm F/2.8 Macro Lens ($900 new)
Panasonic 14-140mm F/3.5-5.6 Super zoom Lens ($560 new)
Original battery and charger
One lens bag.
Not sure if this is the right place to ask for that one =(
3) Granite R1. This is the original Granite offering. The legendary PBT Dye-Sub Granite. Comes with the following sets: base kit, numpad, enter kit, 2 sets of basic icon mods (no pro), Thank You SP set (ABS), and lost and found (this set is full of win). I have a dark gray 7u DSA spacebar in there too.
There have been so many drops for granite and since I owned it I never bothered lookign at the prices for the group buys or the aftermarket prices
Thanks
(That being said, if you ever decide to split, I'd be interested in the numpad haha)
I'm too lazy to split everything up D=
Shipping for single sets is a bit of a pain for international too which is the only reason I haven't bothered.
I may consider it since I have gotten a decent bit of interest for various sets, just not the alphas... (does everyone and their mother own a set of alphas?)
I know when I bought it I paid almost $200 from the seller, but he had more sets in and I parted 2 sets out + the 7u granite spacebar (but replaced it with a dark gray). So I felt that my asking price was fair. Just surprised because normally people go for granite so I thought maybe I was out of touch with prices for that one.
I think your price is fair. From what I've seen on Reddit, people selling the base + numpad + 1 or 2 other kits usually get buys at $120-130. :)Just trying to get fair estimates on some of the items I have for sale:The Granite set you have up on your listing is fairly priced, I think, especially considering the amount of sets that are in it. I think the only thing that's making it difficult to sell is that some people may only be interested in certain kits and not the entire lot?
1) GMK Triumph Adler set. My set came fully intact in the tray (nothing loose). No missing or duplicate keys. No scratches on any of the keys. set comes with the standard manufacturing defects I'm sure you heard about. The long shift has some swirl issues. Iso enter and numpad + have some "missing" plastic on the underside. However the set, besides the swirl, is aesthetically perfect. (Obviously no shine considering the use and no scratching).
I'm hoping to get close to what I paid for it so I'm looking for $130 for that one but given the lower quality of this set compared to others, has that impacted the price heavily?
2) Panasonic Camera Bundle.
What's included:
Original Boxes for the camera and both lenses.
Lens caps for both lenses, camera, etc.
Panasonic G5 Camera body (about 6/10 condition if I'm being very conservative. Used this a lot and has some paint scratches on the bottom. Discontinued but $300ish new).
Panasonic Leica 45mm F/2.8 Macro Lens ($900 new)
Panasonic 14-140mm F/3.5-5.6 Super zoom Lens ($560 new)
Original battery and charger
One lens bag.
Not sure if this is the right place to ask for that one =(
3) Granite R1. This is the original Granite offering. The legendary PBT Dye-Sub Granite. Comes with the following sets: base kit, numpad, enter kit, 2 sets of basic icon mods (no pro), Thank You SP set (ABS), and lost and found (this set is full of win). I have a dark gray 7u DSA spacebar in there too.
There have been so many drops for granite and since I owned it I never bothered lookign at the prices for the group buys or the aftermarket prices
Thanks
(That being said, if you ever decide to split, I'd be interested in the numpad haha)
I'm too lazy to split everything up D=
Shipping for single sets is a bit of a pain for international too which is the only reason I haven't bothered.
I may consider it since I have gotten a decent bit of interest for various sets, just not the alphas... (does everyone and their mother own a set of alphas?)
I know when I bought it I paid almost $200 from the seller, but he had more sets in and I parted 2 sets out + the 7u granite spacebar (but replaced it with a dark gray). So I felt that my asking price was fair. Just surprised because normally people go for granite so I thought maybe I was out of touch with prices for that one.
what's a fair price to pay for a (1989) IBM Model M?
how much would bolt-modded add to the price?
BroBot V2 Mellow Yellow.prob 35$ then
And yes I understand the "retail" or "what you paid for" but I can't seem to find its retail price. Doesn't seem like it was from a public sale?
Hey, guys, do you know how much a Nuclear Kush V2 would be worth?Everyone's going to say "retail" here. And that would be around $35.
all red cheat around 400 sounds about right these days?
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
Because it had some dents. If not, price can more 400$.
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
Because it had some dents. If not, price can more 400$.
Cheers mate.
356 mini, custom case, lubed browns, stickers etc..?
How much for 13 blank black HHKb keycaps? An Ebay vendor gave me a quote of 55$ including shipping cost (~10$)www.elitekeyboards.com/products.php?sub=access,toprekeys&pid=pdkb400ktbn
I find it quite expensive though
Cherry MX switches - have a lot, not sure what current value is
MX blacks - PLATE mount (2003 era - no diodes)
MX blacks - PCB mount (1994 era w/ integrated diodes)
MX blacks - PCB mount (Vintage)
MX blacks - PLATE mount (Vintage w/ LED - RED)
MX browns - PCB mount (1994 era w/ integrated diodes)
MX browns - PCB mount (Vintage)
MX clears - PLATE mount (2012 era - NEW - no diodes)
MX clears - PCB mount (1994 era w/ integrated diodes)
Thanks (in advance)
HB
Cherry MX switches - have a lot, not sure what current value isHow much heroin do you need?
MX blacks - PLATE mount (2003 era - no diodes)
MX blacks - PCB mount (1994 era w/ integrated diodes)
MX blacks - PCB mount (Vintage)
MX blacks - PLATE mount (Vintage w/ LED - RED)
MX browns - PCB mount (1994 era w/ integrated diodes)
MX browns - PCB mount (Vintage)
MX clears - PLATE mount (2012 era - NEW - no diodes)
MX clears - PCB mount (1994 era w/ integrated diodes)
Thanks (in advance)
HB
Price check on a silver viper with vintage MX blues from a dolch?around 400
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
Because it had some dents. If not, price can more 400$.
Cheers mate.
356 mini, custom case, lubed browns, stickers etc..?
Custom case? Acrylic case?
Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers, super custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.
TO decide the price on a custom layout is really hard since it's not suitable for everyone. Otherwise I'd say maybe 10$ over what you bought it for if you are lucky to find a buyer that likes your layout.Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers, super custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.
bump lol
TO decide the price on a custom layout is really hard since it's not suitable for everyone. Otherwise I'd say maybe 10$ over what you bought it for if you are lucky to find a buyer that likes your layout.Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers, super custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.
bump lol
Then it's not super custom lolTO decide the price on a custom layout is really hard since it's not suitable for everyone. Otherwise I'd say maybe 10$ over what you bought it for if you are lucky to find a buyer that likes your layout.Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers, super custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.
bump lol
the problem is that i didnt buy it, i got it in a trade. Also, its still qwerty, its just HHKBed, in the sense of ctrl and caps are switched, and backspace is shorter, blablabla.
Then it's not super custom lolTO decide the price on a custom layout is really hard since it's not suitable for everyone. Otherwise I'd say maybe 10$ over what you bought it for if you are lucky to find a buyer that likes your layout.Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers, super custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.
bump lol
the problem is that i didnt buy it, i got it in a trade. Also, its still qwerty, its just HHKBed, in the sense of ctrl and caps are switched, and backspace is shorter, blablabla.
Kishsaver?
I was one of the winners of those last two auctions. =)) Wanted to see if it was above or below market.Kishsaver?
$400-$500 is what the last two went for. If someone is nice enough to sell you one at cost it'll be $150 IIRC.
pink 456gt750-800
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
Because it had some dents. If not, price can more 400$.
Cheers mate.
356 mini, custom case, lubed browns, stickers etc..?
Custom case? Acrylic case?
https://geekhack.org/index.php?topic=38092.msg733012#msg733012
Looks the same as that silver one.
all red cheat around 400 sounds about right these days?
Coser to 350. Ive seen a few for sale and 350 seems to be the price point.
Because it had some dents. If not, price can more 400$.
Cheers mate.
356 mini, custom case, lubed browns, stickers etc..?
Custom case? Acrylic case?
https://geekhack.org/index.php?topic=38092.msg733012#msg733012
Looks the same as that silver one.
Tsangan wrote price is 400$. I think it's resonable price, bro.
How much do you guys think an HHKB with 55g alphas and 45g mods and landing pads is worth?prob like a type-s +- 10$
Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers,custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.bump haha
a really used OG Miami SP set (non cherry legend)
The silence here is deafening. Not only have 24 hours passed with no response to this, but it seems to have bottlenecked the entire thread!Would answer if I could :U
I am inclined to do the ANSI/Teensy mod anyway and sell it in the high-$100 range. I may not get it here, but I certainly will on ebay.
a really used OG Miami SP set (non cherry legend)
I never answer because fohat always tells me I'm wrong when he doesn't like the pricing I give.
so $150 to $175 is probably a fair range for a modded one
a really used OG Miami SP set (non cherry legend)
$70 to $100 shipped depending on what add-on kits you have.
a really used OG Miami SP set (non cherry legend)
$70 to $100 shipped depending on what add-on kits you have.
Really? He said really used so probably shiny as hell considering Sifo tortured those caps with 150wpm :p
I have an unused R1 Miami TKL set. What do you think that is worth?
a really used OG Miami SP set (non cherry legend)
$70 to $100 shipped depending on what add-on kits you have.
Really? He said really used so probably shiny as hell considering Sifo tortured those caps with 150wpm :p
I have an unused R1 Miami TKL set. What do you think that is worth?
they're quite shiny lol ^^
I'd pay atleast 50$ + shipping for a known, kinda rare set with shine.a really used OG Miami SP set (non cherry legend)
$70 to $100 shipped depending on what add-on kits you have.
Really? He said really used so probably shiny as hell considering Sifo tortured those caps with 150wpm :p
I have an unused R1 Miami TKL set. What do you think that is worth?
they're quite shiny lol ^^
Oops, totally missed that is was Sifos daily board - in that case probably $100 plus to the chance to get his beloved set that have all that custom shine. ;)
Realistically though, your unused set is probably closer to what I quoted and Sifos set should probably be $40 to $50 shipped. They rarely come up in the classifieds.
I have a couple of stock IBM Model F ATs and I need to sell at least one of them.
Would doing an ANSI mod and adding an internal Teensy realistically raise the selling price by at least $50-$60?
My experience has been that with certain exceptions, IBM rehab/mod work is seldom valued very highly by buyers.
You're not wrong about this though.
I'd almost rather use the board as is or attempt the mod myself rather than pay.
It's a weird mentality surrounding IBM gear,
BoW keycaps of a nib g81-1800hqmgb (or whole keyboard in all its mushiness)?I believe I paid $60 for mine last year. I'm assuming we are talking about Cherry UK Iso doubleshots?
BoW keycaps of a nib g81-1800hqmgb (or whole keyboard in all its mushiness)?I believe I paid $60 for mine last year. I'm assuming we are talking about Cherry UK Iso doubleshots?
Think anyone would trade a Kish for a carbon fiber blue alps JD45?
Honestly if the person trading wanted it, a picture like that would be possible.Think anyone would trade a Kish for a carbon fiber blue alps JD45?
If it had a picture of the man himself (JD) with the board, I would probably do it.
I don't own a kishsaver :(
another bump. Really trying to get a price so i can sell.Whats a GH60 with ergoclears, one heavier blue for esc key, green switch stickers,custom layout, and a golden plate worth? No case no caps. OH! and cherry mx stabs.bump haha
Really trying to get a price so i can sell.
Yeah, I'll upload better pics, don't know what went wrong with all the attachments.GH60 from a trade with sth on deskthority. ergoclears, gold plate, green switch stickers and a heavier blue in esc key. Super nice to type on. I have to resolder the space key and the ctrl key so the fit my keycaps. the pgdn key is a fn key, and the \ key is actually backcspace. I used easyAVR for fn layers. Nice to program, worked great.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
yay it made it :) have fun, glad to hear easyAVR worked out for you.
Thanka for the advice!Really trying to get a price so i can sell.
You can always start at the highest price you might expect, and drop 10% per week until it sells.
I'm conserving selling my lightsaver v1, I can take some pictures tonight, just curious what the price of this would go for I'm also in Canada so I'd probably have to ship it as most people on this forum are from US/Europe I feel.
I'm conserving selling my lightsaver v1, I can take some pictures tonight, just curious what the price of this would go for I'm also in Canada so I'd probably have to ship it as most people on this forum are from US/Europe I feel.
I bought mine for $400 shipped from a US seller. Radish is currently asking $450 + Shipping for his LSv1 and also from Canada.
Is yours built or a kit?
87 Genuine Novatouch Sliders, 87 45G Topre Domes, & Springs
I would pay a little more for the sliders, especially if they came with the modifier sliders too! Not sure on the domes though.
Used RF, I would say around $180 for a regular RF 87u, maybe a bit more with the yellow caps? Would depend if you are giving the original caps too or not.
I would pay a little more for the sliders, especially if they came with the modifier sliders too! Not sure on the domes though.
Used RF, I would say around $180 for a regular RF 87u, maybe a bit more with the yellow caps? Would depend if you are giving the original caps too or not.
Has all the mods : http://imgur.com/a/y14Uq
I would pay a little more for the sliders, especially if they came with the modifier sliders too! Not sure on the domes though.
Used RF, I would say around $180 for a regular RF 87u, maybe a bit more with the yellow caps? Would depend if you are giving the original caps too or not.
Has all the mods : http://imgur.com/a/y14Uq
Looks good man, I could be interested, but I would let de_Og@n buy them first!
I would pay a little more for the sliders, especially if they came with the modifier sliders too! Not sure on the domes though.
Used RF, I would say around $180 for a regular RF 87u, maybe a bit more with the yellow caps? Would depend if you are giving the original caps too or not.
Has all the mods : http://imgur.com/a/y14Uq
Looks good man, I could be interested, but I would let de_Og@n buy them first!
No worries,
I have two sets one is *86 sliders (One of them got damaged)
Looking for a price check on some stuff:
Winkeyless B.87 (WKL Layout) and B.Pad, both with:
- 62g lubed/stickered ergo-clears.
- Lubed Cherry Stabs.
- White In-Switch LEDs.
- Matte Frost/Matte Black/Matte Frost Acryllic case with RGB diffueser
- 2 RGB strips. Completely built/lubed/stickered by WKL. Perfect condition.
- Would include 2 custom Circa PC cables (Lightsaber w/ Clear Tech Flex, 7 or 8 feet cant remember).
A set of ANSI WKL OG Cherry Double shot 1800 keys. No shine. Very clean good condition caps. Comes with 2 GMK Blue double shot shift keys for regular TKL compatibility.
I would prefer to sell it together as a 'one and done' kit or trade for an Octagon with caps. But would price things out individually if needed.
IMage in "more" tag:MoreShow Image(http://i.imgur.com/onP8Uoy.jpg)
Skull Squadron TKL plus additional mods SET, with some use?
I picked up 2 dusty Apple Extended Keyboards today.. should I try selling them?
I picked up 2 dusty Apple Extended Keyboards today.. should I try selling them?
I picked up 2 dusty Apple Extended Keyboards today.. should I try selling them?
My guess is that you could easily get $35-$40 + shipping for them, maybe $10-$20 more than that if you are lucky. Serial numbers <500K are probably orange and might be worth at least $5 more than higher-number salmons.
If they are actually AEK2s, they will be worth less, but still easily $25-$30 + shipping in moderate-rough condition.
How much would a Duck Viper with 62g clears (not lubed though) be worth?
Assembled with no LED's besides the two side ones soldered in.
Dear everyone ,not worth that much
I saw this product on ebay. May i ask what price does it worth ?
http://www.ebay.com/itm/NEW-IBM-Model-M-clicky-Space-Saving-Keyboard-SSK-bolt-mod-P-N-1392934-ID-5036628-/291575476949?hash=item43e340b2d5
Thank in advance
I saw this product on ebay. May i ask what price does it worth ?
I don't know if this is the right place to ask.125+
Anyways, at what point would I be overpaying for OG ANSI BoW Cherry doubleshots?
I don't know if this is the right place to ask.Depends on condition...
Anyways, at what point would I be overpaying for OG ANSI BoW Cherry doubleshots?
Just bought a red hellboy trans for $50. Was wondering if I paid too much?Way too much, these go for around 25$.
I don't know if this is the right place to ask.Depends on condition...
Anyways, at what point would I be overpaying for OG ANSI BoW Cherry doubleshots?
150-175 for NIB depending on age of the set is a fair price
Is it the same range for the die sub version?.Dyesub is worth much more
Is it the same range for the die sub version?.Dyesub is worth much more
Over 200?250 and up for good condition, up to 500 for nib
Is there WoB dye sub version? Who can post some pics?
I have a Ducky shine that had soda spilled on it. It has not worked since. Are any of the parts worth anything?I guess you can desolder the switches if they work fine. They are around 0,35-0,4$ ea.
http://imgur.com/tCR0b6d
the HH-REDESCN on elitekeyboards is $4,50I don't see how having it proxied would be any cheaper.
but the shipping cost would be $9.52 for me..
could it be cheaper if i could find someone to proxy..?
the HH-REDESCN on elitekeyboards is $4,50I don't see how having it proxied would be any cheaper.
but the shipping cost would be $9.52 for me..
could it be cheaper if i could find someone to proxy..?
the HH-REDESCN on elitekeyboards is $4,50I don't see how having it proxied would be any cheaper.
but the shipping cost would be $9.52 for me..
could it be cheaper if i could find someone to proxy..?
well, i thought shipping might be (close to) zero for national shipping, if the weight is below a certain threshold.
and then maybe it could just be sent by mail rather than as a package, for cheaper : )
it's just a shame that shipping cost has to be so expensive sometimes. i've gotten a ton of small objects from asia for which i paid no shipping costs at all.
$4.50 already isn't cheap for a regular keycap, but the $9.52 on top of it just makes it painful :(
i'll probably still order one, but there will be tears
Hi All,
I have a big set of Nuclear Data with extras: http://i.imgur.com/OdgBI9q.jpg (http://i.imgur.com/OdgBI9q.jpg). Any idea of its value?
Thank You,
MaNiFeX :llama:
Alphas, Mods, Extra Mods, Macros, Numpad, and Novelty.
Alphas, Mods, Extra Mods, Macros, Numpad, and Novelty.
That is a great set! If I was into Cherry switches, I would love to have it.
Fohat's an ibm'er. :DAlphas, Mods, Extra Mods, Macros, Numpad, and Novelty.
That is a great set! If I was into Cherry switches, I would love to have it.
y u no novatouch? Ż\_(ツ)_/Ż lol!
Fohat's an ibm'er.
Hi All,
I have a big set of Nuclear Data with extras: http://i.imgur.com/OdgBI9q.jpg (http://i.imgur.com/OdgBI9q.jpg). Any idea of its value?
Thank You,
MaNiFeX :llama:
Alphas, Mods, Extra Mods, Macros, Numpad, and Novelty.
Here are the original group buy prices per kit that I have from what I paid
Here are the original group buy prices per kit that I have from what I paid
Thanks so much! I'm hoping to trade these for a sculpted SA set... Appreciate it.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
RETAILSo Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
His questions always amaze me.
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
His questions always amaze me.
Have we spoken before?
So Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
His questions always amaze me.
Have we spoken before?
Nope, but I have seen enough of your posts.
It used to be in Bro caps FAQ but it's currently down. You should be selling at retail, we say this because it's the truth we don't have a secret agenda. Bro has expressed the want to have Brocaps either traded or sold at retailSo Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
I'd ask you the same thing. I have no idea what you mean by "anymore" or why you're being rude.
I got these caps in a trade for a board b/c I like artisan blanks. But now I need $ and I have too many caps so I'd like to sell them.
I've never heard of this price-ceiling policy. Actually, I have never had a Bro until recently and generally know very little about them.
I don't see anywhere on the Brocaps or CtrlAlt board where it says there's a price ceiling enforceable by bans (again, bans from what?). The person I got the caps from didn't mention anything about it either.
If I had some legit evidence of an alleged price ceiling I guess I'd respect it if it's some huge problem. But no one has shown me that. Just alot of unhelpful or rude answers.
It used to be in Bro caps FAQ but it's currently down. You should be selling at retail, we say this because it's the truth we don't have a secret agenda. Bro has expressed the want to have Brocaps either traded or sold at retailSo Long Summer Bro escape keys - Hemo and Mana PoolRETAIL
Wha? I thought the market price for Bro's was typically way above retail. Anyway, I got this in a trade and don't know the retail price.
Bro says retail. Above retail can result in bans.
Do you have a source? And banned from what? Geekhack? From Bro sales?
Are you playing dumb? Trolling? I really can't tell anymore.
I'd ask you the same thing. I have no idea what you mean by "anymore" or why you're being rude.
I got these caps in a trade for a board b/c I like artisan blanks. But now I need $ and I have too many caps so I'd like to sell them.
I've never heard of this price-ceiling policy. Actually, I have never had a Bro until recently and generally know very little about them.
I don't see anywhere on the Brocaps or CtrlAlt board where it says there's a price ceiling enforceable by bans (again, bans from what?). The person I got the caps from didn't mention anything about it either.
If I had some legit evidence of an alleged price ceiling I guess I'd respect it if it's some huge problem. But no one has shown me that. Just alot of unhelpful or rude answers.
It used to be in Bro caps FAQ but it's currently down. You should be selling at retail, we say this because it's the truth we don't have a secret agenda. Bro has expressed the want to have Brocaps either traded or sold at retail
I appreciate the info and thanks for giving a serious answer. I guess the reason for the policy has to do with some concern about speculators clogging up primary market raffles or sales? I know in the art market some gallerists have policies like this.
IDK why people think I'm trolling; I really just want to understand the rules because they do affect me obviously. I'm somewhat new to the mech hobby and very new to the artisan craze. I didn't realize there was this whole culture/unspoken law around Bro Caps (and I'm not casting judgment on it, I just wish I knew more about it).
To be fair, you've admitted that you only came here in the first place to troll, so we (speaking for myself) can't really tell what your intent is at any given moment.
Bro has had this "rule" in place since he started making V2s. If you buy caps with the sole intent of flipping for cash, you can/will be banned from all future Bro sales. Who it's been enforced against is a mystery and will remain so, and clarifications about the specifics/intent of the rule should be made by Bro rather than myself.
Also, just as a note, we would not ban anyone from geekhack for anything even remotely related to this. Don't be so silly. :P
alps green cost per switch?
PC on a black Ducky Shine 3 TKL with Cherry MX Red switches and purple LED backlit in pretty much mint condition with original boxes and accessories.
Thanks for the help in advance!
PC on a black Ducky Shine 3 TKL with Cherry MX Red switches and purple LED backlit in pretty much mint condition with original boxes and accessories.
Thanks for the help in advance!
Not sure if this got buried after the bro's discussion. Anyone have an idea on the worth?
alps green cost per switch?
Assuming good condition, they generally go for $80-150 for a board with them. So I'd say $0.50-0.75 a switch.
Price on dampened cream alps and white clicky alps? Thank you
I have a Nerd TKL Deskthority Award Edition PCB with Gateron Blacks and an Evangelian WASD set. Hand wiring documented here (https://geekhack.org/index.php?topic=71536).Show Image(https://i.imgur.com/1qCD65L.jpg)
Also a Falbatech ErgoDox signature plastics DSA un-ergonomically weighted. It has Gateron Browns for alphas and I think blacks for mods and some clears.
I have a Nerd TKL Deskthority Award Edition PCB with Gateron Blacks and an Evangelian WASD set. Hand wiring documented here (https://geekhack.org/index.php?topic=71536).If I had the money in a couple of week I wouldn't mind getting that board looks lovely ^~^Show Image(https://i.imgur.com/1qCD65L.jpg)
Also a Falbatech ErgoDox signature plastics DSA un-ergonomically weighted. It has Gateron Browns for alphas and I think blacks for mods and some clears.
I'm selling it for a friend. I think the keyset is quite nicely designed. I like the placement of the red not too much but not too little. Aesthetically I think this could be a nice GB set. It was inspired by Feng's evangelian set as he just missed the GB.I have a Nerd TKL Deskthority Award Edition PCB with Gateron Blacks and an Evangelian WASD set. Hand wiring documented here (https://geekhack.org/index.php?topic=71536).If I had the money in a couple of week I wouldn't mind getting that board looks lovely ^~^Show Image(https://i.imgur.com/1qCD65L.jpg)
Also a Falbatech ErgoDox signature plastics DSA un-ergonomically weighted. It has Gateron Browns for alphas and I think blacks for mods and some clears.
What is SoWaRe going for these days?Around 150+ for a pretty mint set
(If I had enough posts, I'd sell 'em in the classifieds. But I don't.)
(If I had enough posts, I'd sell 'em in the classifieds. But I don't.)
How does this change the fact that you need to know their value? Or are you just hoping someone will PM you after seeing this post?
(If I had enough posts, I'd sell 'em in the classifieds. But I don't.)
How does this change the fact that you need to know their value? Or are you just hoping someone will PM you after seeing this post?
Hoff, you should know by now that the price check section is just the post your **** so you can sell it by private bid instead of opening a classified section.
(If I had enough posts, I'd sell 'em in the classifieds. But I don't.)
How does this change the fact that you need to know their value? Or are you just hoping someone will PM you after seeing this post?
I'm not trying to abuse or be a jerk here. I'm making an attempt to follow the rules and be a good citizen. Perhaps not a particularly good attempt, if the question results in rebukes and no valuations.
Classifieds Rules:
- Do not post advertisements outside of the Classifieds and External Auctions subforums.
Hey everyone. What is an asking price for Badwrench's Alps Infinity mod set and optional modifiers with the incorrect font? Assuming everyone on that group buy got a free second set with the incorrect font, would it be alright to ask for a discounted price on the bad font?
I want to make a classified post someday and ask for both sets or even just the bad font ones.
I know Model F's aren't all the rage but where can I price a Model F AT with 2 XT's to get them to sell??? (they all work, one XT could use a bath)There are a couple of XTs on eBay, buy it now priced at $75, if that helps.
Also is this a dolch moogle kit? It's SP DCS. No shine. Caps are dark gray they look black in the photo.
What's it worth?Show Image(http://images.tapatalk-cdn.com/15/10/19/bddc96c4f2b04ed3784392d3b2974870.jpg)
I know Model F's aren't all the rage but where can I price a Model F AT with 2 XT's to get them to sell??? (they all work, one XT could use a bath)There are a couple of XTs on eBay, buy it now priced at $75, if that helps.
Also is this a dolch moogle kit? It's SP DCS. No shine. Caps are dark gray they look black in the photo.
What's it worth?
I know Model F's aren't all the rage but where can I price a Model F AT with 2 XT's to get them to sell??? (they all work, one XT could use a bath)
Also is this a dolch moogle kit? It's SP DCS. No shine. Caps are dark gray they look black in the photo.
What's it worth?Show Image(http://images.tapatalk-cdn.com/15/10/19/bddc96c4f2b04ed3784392d3b2974870.jpg)
Maybe I should sell mine on ebay then
Great condition black duck eagle case.
Great condition black duck eagle case.
325-400$ , depends on condition.
Great condition black duck eagle case.
325-400$ , depends on condition.
For case only? I've seen pre-builts for that much.
Great condition black duck eagle case.
325-400$ , depends on condition.
For case only? I've seen pre-builts for that much.
I have not heard of Viper sold without pcb. What is your plan for pcb?
Great condition black duck eagle case.
325-400$ , depends on condition.
For case only? I've seen pre-builts for that much.
I have not heard of Viper sold without pcb. What is your plan for pcb?
There's a leekup PCB and Plate GB coming up, so I'm buying just a case. And I know it doesn't really make a difference, but it's an Eagle not a Viper.
I'm aware of this since I'm the one doing it :>Oh yeah duh. Looking forward to an ISO Eagle
Brohoho reaper?reaper retail.
partially brass keythulu?
Thanks in advance!
Brohoho reaper?reaper retail.
partially brass keythulu?
Thanks in advance!
A sterling silver BroBot.retail
Thanks in advance! :)
A sterling silver BroBot.retail
Thanks in advance! :)
A sterling silver BroBot.retail
Thanks in advance! :)
I completely understand why everyone always says retail however some of these 'retail' prices are difficult to go back and look up.
I know Bro Caps is a busy guy and I'd rather him spend his free time doing other things but I wonder if he'd be willing to throw together a list of his caps he's sold and the retail prices so we can point people to that list?
A sterling silver BroBot.It was $125 if I remember correctly to buy originally they where pretty cool too since they were created via the lost wax process(?)
Thanks in advance! :)
Any idea what this would go for? 2mm thick titanium plate.Show Image(http://i.imgur.com/WG3g9Xw.jpg)
Any idea what this would go for? 2mm thick titanium plate.Show Image(http://i.imgur.com/WG3g9Xw.jpg)
Is it one of these? https://geekhack.org/index.php?topic=54757.0 (https://geekhack.org/index.php?topic=54757.0)
or maybe this http://www.geekhackers.org/products/60-keyboard-titanium-switch-plates-with-notches-for-switch-disassembly (http://www.geekhackers.org/products/60-keyboard-titanium-switch-plates-with-notches-for-switch-disassembly)
It's in perfect working condition and comes with this extra long IBM SDL cable. I am trying to get an idea of what would be a fair value of this.
It's in perfect working condition and comes with this extra long IBM SDL cable. I am trying to get an idea of what would be a fair value of this.
Those are some interesting legends. Clearly one of the early word-processing programs, but I can't figure/remember which.
I love that "Backspace"! "Word" caps are desired, too.
b.face with 65g zealios and JT Keycaps purple and white?
It's in perfect working condition and comes with this extra long IBM SDL cable. I am trying to get an idea of what would be a fair value of this.
Those are some interesting legends. Clearly one of the early word-processing programs, but I can't figure/remember which.
I love that "Backspace"! "Word" caps are desired, too.
This was for IBM DisplayWrite word processor :) I'll see if someone has idea of its potential worth at the point. Thanks !
It's in perfect working condition and comes with this extra long IBM SDL cable. I am trying to get an idea of what would be a fair value of this.
Those are some interesting legends. Clearly one of the early word-processing programs, but I can't figure/remember which.
I love that "Backspace"! "Word" caps are desired, too.
This was for IBM DisplayWrite word processor :) I'll see if someone has idea of its potential worth at the point. Thanks !
Wow, Displaywrite SSK! These do not appear too often. Did it have stepped Ctrl/Alt keys? It's near original... Worth at least $250, I would say as high as $325, more if bolt-modded.
Thanks for the price idea. I don't think it's bolt modded. I've got this from a guy who was selling his old stuff. I already have a Model M space saver that I'm using. Ctrl/Alt keys are not stepped though.
You think I should put it on eBay and let people bid or should I try selling it here at geek hack ?
Worth at least $250, I would say as high as $325, more if bolt-modded.
I don't think it's bolt modded. I've got this from a guy who was selling his old stuff.
One missing keycap. Mild rust on keyswitch screws/nuts. Obviously can't test it. What would something like this go for?
http://imgur.com/a/cKGzJ (http://imgur.com/a/cKGzJ)
Worth at least $250, I would say as high as $325, more if bolt-modded.
I don't think it's bolt modded. I've got this from a guy who was selling his old stuff.
Do not bolt-mod it.
First, you seldom get any extra money, and very very rarely enough to make it worth all the time and trouble.
Second, if you hope to get a premium for this, it will be from a silly collector who will want it "factory stock" without any modifications at all.
If I had this keyboard, I would clean it and test it thoroughly, to ensure that it was immaculate throughout, and then list it at a ridiculous high price.
I would probably even drop $40 on an orihalcon cable to make it even more desirable.
Then I would lower my price by 10% per week until it sold. If it sold in under 24 hours, I would kick myself for pricing it too low.
Any idea what this would go for? 2mm thick titanium plate.Show Image(http://i.imgur.com/WG3g9Xw.jpg)
Is it one of these? https://geekhack.org/index.php?topic=54757.0 (https://geekhack.org/index.php?topic=54757.0)
or maybe this http://www.geekhackers.org/products/60-keyboard-titanium-switch-plates-with-notches-for-switch-disassembly (http://www.geekhackers.org/products/60-keyboard-titanium-switch-plates-with-notches-for-switch-disassembly)
It's the one from TheBeast GB
EPSON Q203A keyboard? Seems like it has Fujitsu Peerless switches.
not keyboard related, but maybe you guys can help.
I have some old watercooling equipment.
XSPC 360mm big radiator.
no leaks, works fine but a few scratchesShow Image(http://images.craigslist.org/00m0m_9JWERJEBKrD_600x450.jpg)
Cherry G80-1800 HAU beige excellent condition with 5 unusual keys
Ok, hi. Now I really don't want to sell it or anything, just wanted to know what do y'all think it would be worth.
Talking about the so-called "first ever cherry mechanical keyboard", like the one featured in this here video. (https://youtu.be/Pu1gP4PfqCQ?t=8m22s)
And the one I'm talking about is actually more "complete", as it happens to have all the cables and connectors.Show Image(http://i.imgur.com/9gsgkv0.jpg)
I surely will add lots of photos in a separate topic when it arrives. :thumb:
Update: I've got the original box ._.
Best day ever! :D
What switches does it have? How used are the keycaps?
What switches does it have? How used are the keycaps?
excellent throughout, black MX switches
Ok, hi. Now I really don't want to sell it or anything, just wanted to know what do y'all think it would be worth.
Talking about the so-called "first ever cherry mechanical keyboard", like the one featured in this here video. (https://youtu.be/Pu1gP4PfqCQ?t=8m22s)
And the one I'm talking about is actually more "complete", as it happens to have all the cables and connectors.Show Image(http://i.imgur.com/9gsgkv0.jpg)
I surely will add lots of photos in a separate topic when it arrives. :thumb:
Update: I've got the original box ._.
Best day ever! :D
Ho-
-ly
****
Where did you get that?
i just won a reaper from recent bids from ebay. i wana know the value. help thanks.Not what you paid for it anyway :))Show Image(http://images.tapatalk-cdn.com/15/10/31/13f9fa4c8209a4d75ce139c2e51ac92a.jpg)Show Image(http://images.tapatalk-cdn.com/15/10/31/8cc9721180b4cc15ced2fb932aacc9a5.jpg)
i just won a reaper from recent bids from ebay. i wana know the value. help thanks.Not what you paid for it anyway :))Show Image(http://images.tapatalk-cdn.com/15/10/31/13f9fa4c8209a4d75ce139c2e51ac92a.jpg)Show Image(http://images.tapatalk-cdn.com/15/10/31/8cc9721180b4cc15ced2fb932aacc9a5.jpg)
Most will say retail, but if you want a actual price realistically around $100-150
Put it up for trade then that will easily get a toxic reaper offer for trade in no timei just won a reaper from recent bids from ebay. i wana know the value. help thanks.Not what you paid for it anyway :))Show Image(http://images.tapatalk-cdn.com/15/10/31/13f9fa4c8209a4d75ce139c2e51ac92a.jpg)Show Image(http://images.tapatalk-cdn.com/15/10/31/8cc9721180b4cc15ced2fb932aacc9a5.jpg)
Most will say retail, but if you want a actual price realistically around $100-150
Thanks. i know little about that. what i really need is toxic reaper.
Put it up for trade then that will easily get a toxic reaper offer for trade in no timei just won a reaper from recent bids from ebay. i wana know the value. help thanks.Not what you paid for it anyway :))Show Image(http://images.tapatalk-cdn.com/15/10/31/13f9fa4c8209a4d75ce139c2e51ac92a.jpg)Show Image(http://images.tapatalk-cdn.com/15/10/31/8cc9721180b4cc15ced2fb932aacc9a5.jpg)
Most will say retail, but if you want a actual price realistically around $100-150
Thanks. i know little about that. what i really need is toxic reaper.
Price check on new WoB OG Cherry doubleshots (105key ISO G8x-1800 layout, French AZERTY).A lot of those were found on those Raptor boards, so I would guess somewhere below 50EUR. POM 20EUR~.
I'm curious about both "absolute" price and value relative to the POM alternative (laser+infill legends).
Price check on new WoB OG Cherry doubleshots (105key ISO G8x-1800 layout, French AZERTY).
I'm curious about both "absolute" price and value relative to the POM alternative (laser+infill legends).
Hey there, first post! I was directed here from reddit; looking for some advice on the value of a G80-0499. I've been posting a bit about it here (https://www.reddit.com/r/mechmarket/comments/3r23m8/official_price_check_thread_month_of_november/cwkcdb3). I don't have any updated photos since I started cleaning it, but it is cleaning up quite nicely.
Anybody have some advice?
(I've posted an identical post on DT; I figure between all three big MK forums, someone will have a good answer!
PM Photekq, he'll know fore sure. Personally I'd probably only buy that for the caps and switches, but there could well be more value.
PM Photekq, he'll know fore sure. Personally I'd probably only buy that for the caps and switches, but there could well be more value.
He actually contacted me on reddit. He wasn't interested due to the stabilizer damage and noticeable shine on the caps. Thanks though!
I meant more that he'd probably be able to give you a value
I meant more that he'd probably be able to give you a value
I've asked him. We'll see what he says. At this point, it appears that scavenging it for parts is the best option.
What's a good price for an HHKB Pro 1 vs a Pro 2?
I've been doing some research on here and mechmarket to see the prices, and it seems like Pro 1's go for more than Pro 2's, is that correct?
Also, what do you guys think is a fair price for a yellowed Pro 2?
How much is a V1 Nubb Shadowstalker + Fn key?
Any idea on a value for 100 Orange Alps or Salmon Alps?
Yeah most would be around $20 I think but, I could be wrong.How much is a V1 Nubb Shadowstalker + Fn key?
Retail? I think that's between $17-30 (the highest I have seen one, that one was Buckling Spring)
What would be the maximum I should pay for a 10th Anniversary Realforce 55g?
Fallout SA base kit, I got an offer for 300 sek(34$)inc shipping, but feels like its a bit too much.I'm not familiar with a fallout SA set. Does it go by another name?
Fallout SA base kit, I got an offer for 300 sek(34$)inc shipping, but feels like its a bit too much.I'm not familiar with a fallout SA set. Does it go by another name?
Fallout SA base kit, I got an offer for 300 sek(34$)inc shipping, but feels like its a bit too much.I'm not familiar with a fallout SA set. Does it go by another name?
Yes it does, my bad. It was this group buy; https://geekhack.org/index.php?topic=64963.0
Fallout SA base kit, I got an offer for 300 sek(34$)inc shipping, but feels like its a bit too much.I'm not familiar with a fallout SA set. Does it go by another name?
Yes it does, my bad. It was this group buy; https://geekhack.org/index.php?topic=64963.0
So just those four keys from the parent kit correct?
If so, $34 is too much for that kit.
How much is a BBv2 Blood Pact worth?
Winkeyless b.87 SIP socketed with 62g ErgoClears stickered and lubed https://i.imgur.com/7rrE3Zo.jpg (Not mine, being offered to me for sale)
Thanks. It was offered to me for $275 plus fees without caps or the SIP socketed LEDs and I thought that might be a bit steep.
Thanks. It was offered to me for $275 plus fees without caps or the SIP socketed LEDs and I thought that might be a bit steep.
For $275 I would at least want the LED's, b.87s are cool but it's not like they are OTD or something of that sort, I have seen similar boards sold both higher and lower than $250.
I was digging through aunts storage locker and happened to find a Lexmark branded Model M SSK KB#1397961 Manufactured January 13, 1992. I never seen a Lexmark branded one, so I wouldn't know what this is even worth. It's still brand new with styrofoam packaging and everything. No sign of wear and the rivets are all still intact.
Cherry g80-5000?
I was digging through aunts storage locker and happened to find a Lexmark branded Model M SSK KB#1397961 Manufactured January 13, 1992. I never seen a Lexmark branded one, so I wouldn't know what this is even worth. It's still brand new with styrofoam packaging and everything. No sign of wear and the rivets are all still intact.
Good condition SSK goes for 150-200$ if you have the box and it's unused, you can easily add 100-150$ value on top of it.
Cherry g80-5000?
Which layout? Winkey or F-key? condition?
ANSI. What is the price difference between the winkey and the f-key versions?
I saw auction ANSI around 600$. I think billnye got it.he got it for less than that.
Oh. How much?I saw auction ANSI around 600$. I think billnye got it.he got it for less than that.
Does anyone know the retail value of SLS Bro escape keys (http://i.imgur.com/UiTG5WF.jpg)?
Does anyone know the retail value of SLS Bro escape keys (http://i.imgur.com/UiTG5WF.jpg)?
I'm guessing ~$20, maybe someone who ordered some can chime in.
I know shipping can be a pita, but how much does a super nice shape M go for
Not new, but super clean, all in working order.
( 86 silver label ) with cable, and usb adapter. Not bolted.
How much is a Zenith Z-150+keycaps without any switches worth?Next to nothing. People only want them for the switches.
Thanks will take it to be recycled tomorrow.How much is a Zenith Z-150+keycaps without any switches worth?Next to nothing. People only want them for the switches.
I have an extra set of Topre PBT spacebars (the 4 colors) coming with a RF. I wonder how much it's worth.
B.Face- HHKB Layout, Lubed 58g Blacks, clipped Stabs, BBB Acrylic case in (Trans blue-matte black-trans blue-matte black) configuration.
What's a good price to sell a used like new hi-pro?
I'm already going to be losing at least $40 and nobody is interested, is it me? The price? The board?
What's a good price to sell a used like new hi-pro?
I'm already going to be losing at least $40 and nobody is interested, is it me? The price? The board?
Does anyone know the retail value of SLS Bro escape keys (http://i.imgur.com/UiTG5WF.jpg)?
I'm guessing ~$20, maybe someone who ordered some can chime in.
Regular colors were $17 each before shipping. I think the two unique colors (Mana, etc) were slightly more.
How much would a TKL Toxic set go for? No shine.
How much would a TKL Toxic set go for? No shine.
Group buy price.
Matias Quiet Mini Pro, used only a week, with a few short hairline scratches on glossy surface, but otherwise pristine, with all original accessories and box.
I want to sell my 2 months old hhkb like new and 55g topre like new how much did ya say?
Matias Quiet Mini Pro, used only a week, with a few short hairline scratches on glossy surface, but otherwise pristine, with all original accessories and box.
Try around 10% below retail price.I want to sell my 2 months old hhkb like new and 55g topre like new how much did ya say?
HHKB would be 10% below retail. Did you buy the 55g topre at 55g already, or is it a mod?
At 55g not modMatias Quiet Mini Pro, used only a week, with a few short hairline scratches on glossy surface, but otherwise pristine, with all original accessories and box.
Try around 10% below retail price.I want to sell my 2 months old hhkb like new and 55g topre like new how much did ya say?
HHKB would be 10% below retail. Did you buy the 55g topre at 55g already, or is it a mod?
At 55g not modMatias Quiet Mini Pro, used only a week, with a few short hairline scratches on glossy surface, but otherwise pristine, with all original accessories and box.
Try around 10% below retail price.I want to sell my 2 months old hhkb like new and 55g topre like new how much did ya say?
HHKB would be 10% below retail. Did you buy the 55g topre at 55g already, or is it a mod?
a price for a kingsaver 400$?500-600
What's a good price to sell a used like new hi-pro?
I'm already going to be losing at least $40 and nobody is interested, is it me? The price? The board?
a price for a kingsaver 400$?500-600
What do you guys think I'll be able to ask for this? Having some money troubles so I need to clear out anything I'm not using unfortunately.
GH60 Rev B (Purple PCB) w/ 62g Lubed Ergo Clears
Purple Alu plate from GON
Silver 'Hammer' case from Feng (imitation)
I think those cases were $175 at the GB price, so higher now obviously.
I think those cases were $175 at the GB price, so higher now obviously.
I don't think the replica Hammer cases were $175. I can't remember what they cost, but around $100 or a bit less seems right.
I think those cases were $175 at the GB price, so higher now obviously.
I don't think the replica Hammer cases were $175. I can't remember what they cost, but around $100 or a bit less seems right.
I think those cases were $175 at the GB price, so higher now obviously.
I don't think the replica Hammer cases were $175. I can't remember what they cost, but around $100 or a bit less seems right.
Ah, you're right. I was looking at the GB for the real one (https://geekhack.org/index.php?topic=45085.0) :-\
I think these (http://world.taobao.com/item/37135757229.htm?fromSite=main&spm=a230r.1.14.233.KnNWZn&ns=1#detail)might be the right ones.
Anyone know the price of a black on biege moogle set? Respectively an ABS and a PBT, if they exist ;D
Anyone know the price of a black on biege moogle set? Respectively an ABS and a PBT, if they exist ;D
Those replicas must be what I see posted then, huh? I swear I've seen more than 10 of those cases out in the wild, and I just assumed they came from the original GB. TIL.
Those replicas must be what I see posted then, huh? I swear I've seen more than 10 of those cases out in the wild, and I just assumed they came from the original GB. TIL.
Not necessarily. I owned 3 of them, one each of Titan, Silver, and Red (actual Hammer, not replica) until a few days ago, when I let the red one go.
Show Image(http://images.tapatalk-cdn.com/15/11/27/3fe6902f38f48fb9fb5bd2bb1c548f15.jpg)
how much are these four?thanks
Show Image(http://images.tapatalk-cdn.com/15/11/27/3fe6902f38f48fb9fb5bd2bb1c548f15.jpg)
how much are these four?thanks
at retail about 35 - 45 each
Are the XT model F keyboards worth as much as they are selling for on ebay? I want one but I really don't want to fork over 150 for one unless I really got toThat's an insane amount I got the one I just gave away for less than $40 shipped.
Are the XT model F keyboards worth as much as they are selling for on ebay? I want one but I really don't want to fork over 150 for one unless I really got toThat's an insane amount I got the one I just gave away for less than $40 shipped.
I may have been lucky. Ironic that I just gave one away. The best deals I see are from people here on the forums that appreciate the items and just want to redistribute some of their own surplus.Are the XT model F keyboards worth as much as they are selling for on ebay? I want one but I really don't want to fork over 150 for one unless I really got toThat's an insane amount I got the one I just gave away for less than $40 shipped.
Are you joking? Why the hell do they cost so much on ebay then.. ;_; do they pop up here on the classifieds often?
I may have been lucky. Ironic that I just gave one away.
Looking to part with my first custom project. All parts sourced with local manufactures using swills tool, assembled by me.Anyone have an idea? If not much I'd rather keep as sentiment.
Here is the link to the thread I made. (https://geekhack.org/index.php?topic=74223.msg1823134#msg1823134)
Not much I'm afraid, probably just the cost of the parts or even less. Afaik hand wired keyboards don't go high in aftermarketLooking to part with my first custom project. All parts sourced with local manufactures using swills tool, assembled by me.Anyone have an idea? If not much I'd rather keep as sentiment.
Here is the link to the thread I made. (https://geekhack.org/index.php?topic=74223.msg1823134#msg1823134)
Are you joking? Why the hell do they cost so much on ebay then
How much for a realforce 55g donor board?Anybody?
How much for a realforce 55g donor board?Anybody?
356 mini soldered with blacks.
All my monies T_T is this one with the black or red case?
All my monies T_T is this one with the black or red case?
Red. It's mine though, back off!
more like 550-600+ tbhAll my monies T_T is this one with the black or red case?
Red. It's mine though, back off!
Phew, I only want the mini with the black case XD
Somewhere between 400-500 seems right. The one with the black case would be worth more as there are fewer of them.
Are you joking? Why the hell do they cost so much on ebay then
Until Soarer's Converter came along, XTs were $15 keyboards. After about 3 years ago, they started going for $30-$40.
In the last year or so they usually go up on ebay for $100+ but don't sell. I can't see paying over $50 + shipping, but then I have 1-1/2 of them for use in a project and I would never use one in its stock state.
more like 550-600+ tbhAll my monies T_T is this one with the black or red case?
Red. It's mine though, back off!
Phew, I only want the mini with the black case XD
Somewhere between 400-500 seems right. The one with the black case would be worth more as there are fewer of them.
What should I expect to pay for an OEM Poker II case?
Show Image(http://images.tapatalk-cdn.com/15/11/27/3fe6902f38f48fb9fb5bd2bb1c548f15.jpg)
how much are these four?thanks
at retail about 35 - 45 each
I COULD BE WRONG
but those balls didn't have a retail price since they were like the extras in that one auction? Just sayin'
I wouldn't know what to price those at honestly. I imagine the Blackout Bros are about 50-70ish each aftermarket like on reddit. If you so wish.
Price check for KMAC Happy, any idea?
I mean a donor 55g realforce that i modded to 45g to make a 55g hhkb
thx for the reply manI mean a donor 55g realforce that i modded to 45g to make a 55g hhkb
A little less than market price then, $180 or 190 probably.
thx for the reply manI mean a donor 55g realforce that i modded to 45g to make a 55g hhkb
A little less than market price then, $180 or 190 probably.
thx for the reply manI mean a donor 55g realforce that i modded to 45g to make a 55g hhkb
A little less than market price then, $180 or 190 probably.
I think I got $185 + shipping for mine.
OG doubleshot caps from a Dolch PAC.
OG doubleshot caps from a Dolch PAC.
Highly dependent on condition...I paid around $70 for mine in decent condition (little shine on caps) and I think that's fair.
how much working chicony 5161 with vintage mx blue?
(Attachment Link)
Opinions on $ for Cherry G80 1818 HEU ?
Double shot caps on MX Whites, AT / XT 5-pin DIN (Large / old / first(ish) keyboard standard), lightly used.Show Image(http://i.imgur.com/iQSJ5p1.jpg)
Opinions on $ for Cherry G80 1818 HEU ?Out of curiosity what's the date code?
Double shot caps on MXWhitesClears, AT / XT 5-pin DIN (Large / old / first(ish) keyboard standard), lightly used.Show Image(http://i.imgur.com/iQSJ5p1.jpg)
I believe those would be MX Clears.
Out of curiosity what's the date code?Not sure I know what bit is the date code.
Also, those keycaps look like they're a different colour from regular black on beige Cherry. Is that just the photo or are the modifiers actually darker? It's strange that the cable is black too.
Show ImageOut of curiosity what's the date code?Not sure I know what bit it the date code.
Also, those keycaps look like they're a different colour from regular black on beige Cherry. Is that just the photo or are the modifiers actually darker? It's strange that the cable is black too.
(http://i.imgur.com/f43ZDSi.jpg) (http://i.imgur.com/f43ZDSi.jpg)
There are two separate color caps light and dark caps. Here in the close up you can see F5-F8 are darker than F1-F4 and F9-F12, the modifiers are this dark color too. Sorry my lighting is causing some difficulty with this.
(http://i.imgur.com/yi49JfM.jpg) (http://i.imgur.com/yi49JfM.jpg)
I have 4 of these, 3 out of the 4 have black cables.
Opinions on $ for Cherry G80 1818 HEU ?
Double shot caps on MXWhitesClears, AT / XT 5-pin DIN (Large / old / first(ish) keyboard standard), lightly used.Show Image(http://i.imgur.com/iQSJ5p1.jpg)
As ray says, the date code is E30.
I'm still a little curious about the colours. This is how Cherry beige caps usually look. To me, in your pictures, the modifier caps look a lot darker than regular beige. How do they look in comparison in person?Show Image(http://img.zol.com.cn/ut_508/80/94/4fffe51c.jpg)
That's interesting. Is the one with a beige cable also a G80-1818HEU, or is it a G80-1800, or something else?As ray says, the date code is E30.
I'm still a little curious about the colours. This is how Cherry beige caps usually look. To me, in your pictures, the modifier caps look a lot darker than regular beige. How do they look in comparison in person?Show Image(http://img.zol.com.cn/ut_508/80/94/4fffe51c.jpg)
The three with black cables have darker modifiers than the one with a beige cable.
The one with a beige cable looks like the image you posted.
Out of curiosity what's the date code?Not sure I know what bit is the date code.
Also, those keycaps look like they're a different colour from regular black on beige Cherry. Is that just the photo or are the modifiers actually darker? It's strange that the cable is black too.Show Image(http://i.imgur.com/f43ZDSi.jpg)
There are two separate color caps light and dark caps. Here in the close up you can see F5-F8 are darker than F1-F4 and F9-F12, the modifiers are this dark color too. Sorry my lighting is causing some difficulty with this.Show Image(http://i.imgur.com/yi49JfM.jpg)
I have 4 of these, 3 out of the 4 have black cables.
That's interesting. Is the one with a beige cable also a G80-1818HEU, or is it a G80-1800, or something else?
The one with a beige cable is a G80-1800HEUWhat's the date code of the G80-1800HEU?
No yellowing, no shine, a few nicks in the cases, I didn't see nicks on any caps. They vary from almost NOS (#23, still has some packaging on it) to lite use (#5074). These were from a data center, and some callous nerd put them in the bottom of a cabinet wrapping all the cables around the bunch of them and forgot about them for a decade or so, therefore all cables except the one on #23 are a bit stretched out of their stock coil.That's an awesome find. :D
This is all of them:
Imgur Album (https://imgur.com/a/dmGRV/)
How much would:
1) a hyperfuse white, blue/Purple eyed keyng go for?
2) a hyperfuse blue/purple 50/50 slo fi.
Thanks!How much would:
1) a hyperfuse white, blue/Purple eyed keyng go for?
2) a hyperfuse blue/purple 50/50 slo fi.
Well at retail slo fis and Keyng go for around $35 - $45 each however since these were from the hyperfuse raffle it mostly up to the buyers discretion
Being new to this game, I've missed quite a lot of action - so if I wanted to get a Rustler and Keythulhu, somehow, somewhere .. what would it cost (beside an arm and a leg) these days? Should I just sit down and cry?
Being new to this game, I've missed quite a lot of action - so if I wanted to get a Rustler and Keythulhu, somehow, somewhere .. what would it cost (beside an arm and a leg) these days? Should I just sit down and cry?
Being new to this game, I've missed quite a lot of action - so if I wanted to get a Rustler and Keythulhu, somehow, somewhere .. what would it cost (beside an arm and a leg) these days? Should I just sit down and cry?
So umm can anyone estimate what a Hi-Pro is worth after:
1. All Hi-Pro switches have been replaced with regular switches (from 87u) EXCEPT for the number pad
2. The scroll lock switch is missing, exposing the rubber dome
3. All domes in the dome sheet are still there, and 45g if I'm not mistaken
4. All Hi-Pro caps have been removed.
I just swapped the switches + caps over to my 87u and am so happy with 55g Hi-Pro that I doubt I'll ever return the board to normal.
There are so many sick sales currently running or running sometime this month, just off the top of my head there's Krytone, Keycollectiv, KatzenKinder, HKP, retrochick, and girlDC. Why cry b/c you can't get a Bro? Broaden your horizons.
So umm can anyone estimate what a Hi-Pro is worth after:
1. All Hi-Pro switches have been replaced with regular switches (from 87u) EXCEPT for the number pad
2. The scroll lock switch is missing, exposing the rubber dome
3. All domes in the dome sheet are still there, and 45g if I'm not mistaken
4. All Hi-Pro caps have been removed.
I just swapped the switches + caps over to my 87u and am so happy with 55g Hi-Pro that I doubt I'll ever return the board to normal.
I guess it all depends on the buyer.
You might have better luck parting it out for spare parts as the case is a different color than standard black, people occasionally need screws or springs etc.
You can certainly try to sell it as a whole, I just have no idea what range to value it.So umm can anyone estimate what a Hi-Pro is worth after:
1. All Hi-Pro switches have been replaced with regular switches (from 87u) EXCEPT for the number pad
2. The scroll lock switch is missing, exposing the rubber dome
3. All domes in the dome sheet are still there, and 45g if I'm not mistaken
4. All Hi-Pro caps have been removed.
I just swapped the switches + caps over to my 87u and am so happy with 55g Hi-Pro that I doubt I'll ever return the board to normal.
I guess it all depends on the buyer.
You might have better luck parting it out for spare parts as the case is a different color than standard black, people occasionally need screws or springs etc.
Hmm, I guess I'll keep an eye out for people needing parts (domes, springs, screws, case) until there is nothing left! On to the free stuff thread!
looking to sell my 2 most costly keyboards since building my ideal board and losing interest in keyboards in general, could i get a price check on these both?
USED HHKB PRO 2, perfect working condition, no damage or wear, recently cleaned
poker2 with LUBED&STICKERED VINTAGE MX BLACK switches & TEX aluminium case http://imgur.com/a/5xtKr
$200 for a used HHKB? They sell for $206 new right now..
$200, $175-190 ish
$200 for a used HHKB? They sell for $206 new right now..
$200, $175-190 ish
OG Cherry QWERTZ Dyesubs50-75EUR for a used set depending on condition. They're really common.
OG Cherry QWERTZ Dyesubs50-75EUR for a used set depending on condition. They're really common.
So umm can anyone estimate what a Hi-Pro is worth after:
1. All Hi-Pro switches have been replaced with regular switches (from 87u) EXCEPT for the number pad
2. The scroll lock switch is missing, exposing the rubber dome
3. All domes in the dome sheet are still there, and 45g if I'm not mistaken
4. All Hi-Pro caps have been removed.
I just swapped the switches + caps over to my 87u and am so happy with 55g Hi-Pro that I doubt I'll ever return the board to normal.
So umm can anyone estimate what a Hi-Pro is worth after:
1. All Hi-Pro switches have been replaced with regular switches (from 87u) EXCEPT for the number pad
2. The scroll lock switch is missing, exposing the rubber dome
3. All domes in the dome sheet are still there, and 45g if I'm not mistaken
4. All Hi-Pro caps have been removed.
I just swapped the switches + caps over to my 87u and am so happy with 55g Hi-Pro that I doubt I'll ever return the board to normal.
$150 at best. I sold mine for $120ish
Commando 23 (88 base set and Kit01) on a Phantom inside a Filco camo case with a custom permanently attached cable.Show Image(http://i.imgur.com/8XyRXeX.jpg)
Not sure myself, but that is really cool!
Commando 23 (88 base set and Kit01) on a Phantom inside a Filco camo case with a custom permanently attached cable.Show Image(http://i.imgur.com/8XyRXeX.jpg)
Oh and a never used DCS Bro-set (the purple color one)
what's the asking price for quantum nuka cola nowadays?
Before I hit up taobao tomorrow..
What would be a fair price for a G80-1800 HAU? About $75 USD for good condition? There are some for more but they look mint.
Before I hit up taobao tomorrow..
What would be a fair price for a G80-1800 HAU? About $75 USD for good condition? There are some for more but they look mint.
Can you link me to them? I'm not having a lot of luck finding them on taobao.
Price Check on PBT4 Japanese Keycap set from ivans gb? ]:
Price Check on PBT4 Japanese Keycap set from ivans gb? ]:
The amount they sold for in the GB + fees and whatever is probably a good starting point.
Am I asking too much for my YOTH? Or is it just not desirable at all?
https://geekhack.org/index.php?topic=63570.0
Am I asking too much for my YOTH? Or is it just not desirable at all?
https://geekhack.org/index.php?topic=63570.0
For it shipped, I don't think so. I was briefly (as in one day only) looking for one, ISO and MX whites are 2 things I don't like otherwise I would have bought it :(
I'm pretty sure you paid more than 160GBP for it right?
What do the beast titanium switch tools go for now?
What do the beast titanium switch tools go for now?
I have never seen those trade hands in a public sale. I remember the original ones were going for double group buy price due to rarity, but now that MK has their own and the hype may have died down, I'm not sure what they're worth. :confused:
What do the beast titanium switch tools go for now?
I have never seen those trade hands in a public sale. I remember the original ones were going for double group buy price due to rarity, but now that MK has their own and the hype may have died down, I'm not sure what they're worth. :confused:
Well they cost ~$43 originally so I was gonna go with $50 shipped but didn't know if there was any demand or not.
Cherry G80-1000 HAG (British layout, Black switches, Grey spacebar)Is there any shine at all on any of the keycaps? Is there any yellowing? Can you please post a picture of the label on the back so we can see the date of manufacture?Show Image(http://i.imgur.com/TiInx2x.jpg)
Just curious how much these typically go for in good condition nowadays?
Is there any shine at all on any of the keycaps? Is there any yellowing? Can you please post a picture of the label on the back so we can see the date of manufacture?
Hey. I need some money for a PC related project I have in mind (not mech keyboard related) and I am considering selling two of my keyboards, a switch tester, a couple keysets and some artisans.
I'd like to know roughly how much would these be worth.
- Pok3r white backlit, black alu case with Cherry MX Clears (ANSI)
- CM Storm Quickfire XT with Cherry MX Brown (ANSI)
- A NPKC 17 switch tester (with some Cherry, Gateron and Kailh switches, comes with keycaps);
- A Ducky Blue/Gray laser engraved thick PBT keyset (ANSI)
- A Vortex White backlit PBT+POM (thick) keyset (ANSI)
- A Tai-Hao PBT Bumble Bee keyset (ANSI)
- 3 artisans: one Watermelon (MX) from SnackKeys fruit basket and two HypeMonkeys (also MX) from KatzenKinder (GeekHack).
Everything is in mint condition. The keyboards come with their original packaging and accessories and the keysets look like brand new with no signs of shine.
Stock Novatouch keycaps?
What would be a fair price for a complete GH60-Nostalgia set, gently used, no shine? IIRC GB price was $100.
What would be a fair price for a complete GH60-Nostalgia set, gently used, no shine? IIRC GB price was $100.
I picked one up recently for ~100USD with the cable included, and thought it was more than fair :)
~Edit; that was excluding shipping
WASD V2 Barebones ANSI 80% MX Brown
I'm going to make a massive loss if I decide to sell it, cost me $220 (:'() to get it into the UK.
Used barebones Novatouch?
digilog case
Essentially nothing. Maybe $5 to the right person, but stock caps are pretty much worthless unless someone is looking for a basis for sculpting artisans or has lost some of the stock caps and wants to put them back on when they sell the board.
IMSTO's PBT Blank & blue?
How much would a Filco Majestouch-2, Tenkeyless with Cherry MX Browns be worth? Its only been used for like a couple of days.
WASD V2 Barebones ANSI 80% MX Brown
I'm going to make a massive loss if I decide to sell it, cost me $220 (:'() to get it into the UK.
~100$ from what I can tell (https://www.reddit.com/r/mechmarket/comments/3tde8g/uswa_h_wasd_v2_104key_barebones_cherry_mx_brown_w/) :'(
WASD V2 Barebones ANSI 80% MX Brown
I'm going to make a massive loss if I decide to sell it, cost me $220 (:'() to get it into the UK.
~100$ from what I can tell (https://www.reddit.com/r/mechmarket/comments/3tde8g/uswa_h_wasd_v2_104key_barebones_cherry_mx_brown_w/) :'(
What a shame :'( Decided to tear it down and give the springs an update, might make a new case for it seeming I paid so damn much for it.
The sharks are a running gag from the Church of Halverson and there's already a price check thread.
OG ANSI Doubleshots with medium shine.
What color and layout ? I'm assuming you mean beige winkeyless
My price check request is:25-12-2015: CC - Ogre: ~$150
27-12-2015: JTK Debut set with added mods.
27-12-2015: Pumpkin Bro Cap.
27-12-2015: Pumpkin Bro Cap Translucent.
27-12-2015: Krap Mutated 6shot.
You're right, I forgot those ****ing weird little lasered '98sOG ANSI Doubleshots with medium shine.
What color and layout ? I'm assuming you mean beige winkeyless
Beige
And they only come wkl
Not true winkeys are just much rare for beige. Whereas the win keyless are rare for white on black
You're right, I forgot those ****ing weird little lasered '98sDoubleshot w/ pad print win/menu keys too..
My price check request is:25-12-2015: CC - Ogre: ~$150
27-12-2015: JTK Debut set with added mods.
27-12-2015: Pumpkin Bro Cap.
27-12-2015: Pumpkin Bro Cap Translucent.
27-12-2015: Krap Mutated 6shot.
JTK caps are worth the GB price, give or take a few bucks (I think $88 with both mod sets), Bros are retail (I think these were both $35 caps). The KRAP quad and six-shot caps I have only ever seen as prizes from Krytone's giveaways. I had a quad-shot and sold it for avg. retail ($20)
How much does a Duck Viper with vintage blues, mint condition, no leds but side LEDs go for nowadays? Have not been around here for a while. Any help would be appreciated.
Is this a good deal or is there better out there?
https://www.pcliquidations.com/p22530-toshiba-noteworthy-rt6856tw-gray
It's supposed to be a good one though. :-[Is this a good deal or is there better out there?
https://www.pcliquidations.com/p22530-toshiba-noteworthy-rt6856tw-gray
$50 for a rubber dome?
Plenty of people pay $200-$300 for rubber domes aka Topre boards.Show Image(https://lh4.googleusercontent.com/S-hYaP-Ev9aKeW70AHjqYocXMBsYorA9ADH_I0JUvFtITwZi3Xz1j85-30K1iA1FHQDIRvEaYQ=s128-h128-e365)
A board with alps linear green? 100$?
The caps are double shot the board is in good condition this is a photo of oneA board with alps linear green? 100$?
Depends on the condition, if it comes with decent caps or thin lasered crap, and so on. They tend to go in the $60-120 shipped range depending on the board.
The caps are double shot the board is in good condition this is a photo of oneA board with alps linear green? 100$?
Depends on the condition, if it comes with decent caps or thin lasered crap, and so on. They tend to go in the $60-120 shipped range depending on the board.Show Image(http://i.ebayimg.com/00/s/MTQ0MFgxMDgw/z/kxIAAOSwFqJWhVZq/$_122.JPG?set_id=880000500F)
The seller said that it feels like cherry mx brown and it doesn't have click. it's genuine right? the serial number is ortek mck 101 btwThe caps are double shot the board is in good condition this is a photo of oneA board with alps linear green? 100$?
Depends on the condition, if it comes with decent caps or thin lasered crap, and so on. They tend to go in the $60-120 shipped range depending on the board.Show Image(http://i.ebayimg.com/00/s/MTQ0MFgxMDgw/z/kxIAAOSwFqJWhVZq/$_122.JPG?set_id=880000500F)
I'd put it in the $75-100 range if it's like new.
It's on the high end of what I've seen them go for but not so much out of reason if it's in great condition. I think the cheats annodizing made them easy to scratch or something like that if I remember correctly so there are a lot of them with nicks and scratches(pretty sure that was the Cheat but could be wrong? anyone?).yep that is cheat main problem well I think I just wait for another custom
I'm curious to see if my backup board is worth anything.
It's a IBM Model M 52G9658 (missing the right Alt cap).
I suspect that you could easily get $40-$50 + shipping for it. Or even easier trade it straight up for a Cherry MY.
Signed up here looking to find a Cherry MY keyboard to replace my G81-3077... but reading through the forums, I'm curious to see if my backup board is worth anything.If everything is working great and it's pretty clean, I'd just get that missing Alt cap from either unicomp or get an original from clickykeyboards and then it should be worth a bit more than the normal $40-50. I'll typically pay up to $75 shipped for a board in good condition like yours. Because it's pretty easy to find these boards, I wouldn't expect $100 for it unless you get some sort of crazy bidding war on ebay.
It's a IBM Model M 52G9658 (missing the right Alt cap).Show Image(http://i.imgur.com/n41KKAU.jpg)Show Image(http://i.imgur.com/fHEmDX8.jpg)
If everything is working great and it's pretty clean, I'd just get that missing Alt cap from either unicomp or get an original from clickykeyboards and then it should be worth a bit more than the normal $40-50. I'll typically pay up to $75 shipped for a board in good condition like yours. Because it's pretty easy to find these boards, I wouldn't expect $100 for it unless you get some sort of crazy bidding war on ebay.
I'm not really trying to sell this board, or make money off it. Bought it cheap at a thrift store a while ago as a backup. Just kinda curious.I always find deals on Cherry MY switch based boards. You willing to send the M my way for some really good links? ;)
Since I came to Geekhack looking for Cherry MY G81's; that's really all I care about. This Model M is my backup, but if I had multiple G81's, I'd have no need for this; so I'd just as easily sell/trade it in order to get me back behind a board I like.
I always find deals on Cherry MY switch based boards. You willing to send the M my way for some really good links? ;)
j/k! I actually post the links in the great finds forum. I've gotten a numpad with my switches for $26.99 recently and there's two boards that I've linked to that are both under $50 (one is only $16 something).
I remember looking up the specs to find out what switches are in them--let me see what I can dig up.I always find deals on Cherry MY switch based boards. You willing to send the M my way for some really good links? ;)
j/k! I actually post the links in the great finds forum. I've gotten a numpad with my switches for $26.99 recently and there's two boards that I've linked to that are both under $50 (one is only $16 something).
Ha, I'm not married to this Model M... it's just my backup until I can get my hands on a replacement G81 & G81 backup.
Just saw your post about the G81-7000LPDUS-2 in the 'Great Finds' section. If these G81-7xxx and G81-8xxx models have Cherry MY switches and feel like my old G81-3077; I'd take any of them! Two questions though:
- Aside from different key caps and/or slightly different layout... Are there any other differences between the G81-7xxx/8xxx series and the G81-3xxx series?
- (Silly question) But since these are POS keyboards with credit card readers; will they function the same as any regular keyboards? Or will I need the software or anything extra?
I remember looking up the specs to find out what switches are in them--let me see what I can dig up.
So here's the spec sheets for the g81-7000 and 3000 series straight from Cherry. It seems like these are indeed the same switch and keycap. :)
http://cherrycorp.com/wp-content/uploads/2014/12/G81_7000.pdf
http://www.cherry.de/PDF/EN_G81-3000.pdf
The POS board will work perfectly normal in my experience. We've used boards with cc readers for that last 10 years or so by different companies (but not these). In fact, the keycard reader will be handy for when you need to enter in your cc for online orders, lol. I've actually thought about having a separate keycard reader on my desk just for that purpose, lol.
The spec sheets didn't specify the MY switches, but the specs for the switches match exactly and they're from the same series and people don't like them here, lol, so I think they're MY. Personally, I think the keycap swap may be quite nice, or even just doing the modifiers for a 'two-tone' look. :cool:I remember looking up the specs to find out what switches are in them--let me see what I can dig up.
So here's the spec sheets for the g81-7000 and 3000 series straight from Cherry. It seems like these are indeed the same switch and keycap. :)
http://cherrycorp.com/wp-content/uploads/2014/12/G81_7000.pdf
http://www.cherry.de/PDF/EN_G81-3000.pdf
The POS board will work perfectly normal in my experience. We've used boards with cc readers for that last 10 years or so by different companies (but not these). In fact, the keycard reader will be handy for when you need to enter in your cc for online orders, lol. I've actually thought about having a separate keycard reader on my desk just for that purpose, lol.
WOW, thanks for the info!
I looked up one of those G81-8xxx & 7xxx boards on Cherry's site, but didn't see where it specified Cherry MY switches (everything I know I learned recently from awesome people here and from Deskthority).
Haha, not sure I'm ready to start swiping cards and taking orders from my desktop.... but I'm definitely going pull the trigger on one of these POS G81's. Might even get fancy and put my G81-3077 keys onto the black frame (not sure if that's in poor taste, but judging by everyone hating Cherry MY switches, I guess I can't do much more harm). Hopefully down the line I'll find a PCB to put into my old G81-3077, but until then these seem like the perfect backup boards.
Thanks again for all the help!
Differences are in caps and layouts yes. Some boards need some software to program relegendable keys and to get the card reader working. Otherwise you'd be fine without softwareHuge layout difference for sure, but I'm pretty sure the keycaps are standard size. They usually are in these applications as people in retail are used to 'normal' keys for 'normal' functions. I don't think this board has any relegendables, but it does allow some custom programming via Cherry's software. My guess is the card reader just converts the tracks to normal scan codes (no driver) as every single card I've run into does just that. POS systems are usually industry standards-based since too many drivers and whatnot makes them flaky and not as robust for 24x7 usage.
How much for a modded hhkb with BT controller,Hypersphere silencing ring,PBT spacebar,plus 1 keycaps set,Lubed,Custom cables
are 500 to 450 are good price? I want to sell my topre board. Time to say goodbye to topre :'(
thank you for the reply bro ****in shipping to indo is what makes the price more ok will post the classified for selling this. goodbye topre you've been good to me :pHow much for a modded hhkb with BT controller,Hypersphere silencing ring,PBT spacebar,plus 1 keycaps set,Lubed,Custom cables
are 500 to 450 are good price? I want to sell my topre board. Time to say goodbye to topre :'(
About 350 for everything, if it's 55g modded then worth more
goodbye topre you've been good to me :p
Its like the dark side of the force :p. I think if i eventually get mx5000 I will never go topre againgoodbye topre you've been good to me :p
you can't just leave topre...it will find you
again... :p
whats a set of cherry black on white/beige doubleshots go for these days? NOT GMK
from g80-1813?
whats a set of cherry black on white/beige doubleshots go for these days? NOT GMK
Yep you're right jerue I can't sold this babygoodbye topre you've been good to me :p
you can't just leave topre...it will find you again... :p
Price check on my Zorb Caps Skull Santa + B-Grade Festive Golem.
Link for my Caps http://imgur.com/a/J79S1
I am curious as to what the following is worth. Not for sale, just a price check!Sell me yer realforce or dyesub :p :p
Digilog Realforce 55g lubed/silenced
Displaywrite SSK w/all og caps
G81-3100 SAU dyesubs. They're either SAU or SDU, having a hard time differentiating between the two :( I've only just started using them, and were sold to me as new. Not using the spacebar.
Hehe listen to this guy 400 or 500 for the case IIRCI am curious as to what the following is worth. Not for sale, just a price check!Sell me yer realforce or dyesub :p :p
Digilog Realforce 55g lubed/silenced
Displaywrite SSK w/all og caps
G81-3100 SAU dyesubs. They're either SAU or SDU, having a hard time differentiating between the two :( I've only just started using them, and were sold to me as new. Not using the spacebar.
**** post!
Digilog - 400-500 depend, hard to find the case
If dyesubs are in NIB condition it's 200-250Hehe listen to this guy 400 or 500 for the case IIRCI am curious as to what the following is worth. Not for sale, just a price check!Sell me yer realforce or dyesub :p :p
Digilog Realforce 55g lubed/silenced
Displaywrite SSK w/all og caps
G81-3100 SAU dyesubs. They're either SAU or SDU, having a hard time differentiating between the two :( I've only just started using them, and were sold to me as new. Not using the spacebar.
**** post!
Digilog - 400-500 depend, hard to find the case
Dyesub if good condition 150 to 200 :p
Where can I find digilog for that price I want one hehehehIf dyesubs are in NIB condition it's 200-250Hehe listen to this guy 400 or 500 for the case IIRCI am curious as to what the following is worth. Not for sale, just a price check!Sell me yer realforce or dyesub :p :p
Digilog Realforce 55g lubed/silenced
Displaywrite SSK w/all og caps
G81-3100 SAU dyesubs. They're either SAU or SDU, having a hard time differentiating between the two :( I've only just started using them, and were sold to me as new. Not using the spacebar.
**** post!
Digilog - 400-500 depend, hard to find the case
Dyesub if good condition 150 to 200 :p
Digilog case alone is 250-300
Also how much is the Digilog giliotine case?
I disagree with the dyesub prices above. I think $500 for a NIB board and $250 for a good condition set is far more realistic.What the hell that price is crazy. Does that keycaps really worth the price tag?
What the hell that price is crazy. Does that keycaps really worth the price tag?In my experience yes. That said, perhaps the price I stated is out of date.. Perhaps Gateron caps have made the market fall a bit. I'm not sure. I just know that $500 was the standard price for a NIB board like a G81-3116SDU or G81-3100SAU not long ago.
Wow now I need to find the ISO one because its cheaper :pWhat the hell that price is crazy. Does that keycaps really worth the price tag?In my experience yes. That said, perhaps the price I stated is out of date.. Perhaps Gateron caps have made the market fall a bit. I'm not sure. I just know that $500 was the standard price for a NIB board like a G81-3116SDU or G81-3100SAU not long ago.
Hello, could someone pricecheck :Can you give the full article numbers please? E.G G80-3000HAD, G81-3000HAU, etc.
Cherry G80-3000 Actual
Cherry G80-3000 Old
Cherry G81-3000
Cherry G83-3000
Thanks
Hello, could someone pricecheck :
Cherry G80-3000 Actual
Cherry G80-3000 Old
Cherry G81-3000
Cherry G83-3000
Thanks
Wow now I need to find the ISO one because its cheaper :pWhat the hell that price is crazy. Does that keycaps really worth the price tag?In my experience yes. That said, perhaps the price I stated is out of date.. Perhaps Gateron caps have made the market fall a bit. I'm not sure. I just know that $500 was the standard price for a NIB board like a G81-3116SDU or G81-3100SAU not long ago.
http://puu.sh/j9LYP/da48b68776.jpgGerman Cherry dyesubs. I'm sure you can find some older price check on them.
on the back it says article no. g81-1000 sbd /03 and Serial No. 026167 D31
thanks :)
I'm gonna find the azerty one muahahhaWow now I need to find the ISO one because its cheaper :pWhat the hell that price is crazy. Does that keycaps really worth the price tag?In my experience yes. That said, perhaps the price I stated is out of date.. Perhaps Gateron caps have made the market fall a bit. I'm not sure. I just know that $500 was the standard price for a NIB board like a G81-3116SDU or G81-3100SAU not long ago.
and better :)
go iso qwertz or qwerty don't touch my azerties !
What's a fair price to pay for a CMYW set if I can find one?
What's a fair price to pay for a CMYW set if I can find one?
$45-50 new
having an Logitech Cordless Trackman FX (Trackball).That's a pretty neat one. Haven't seen that design too often. You might get more by putting it on ebay. Ones with a box seem to fetch over $100 usd, so if you have the box you should be able to get a bit more.
How much is it worth?? working fine, but ill upgrade to kensington expert
I was wondering what yall think the trade value (in dollars) that this BroBot V1 is, it's a,medium toned solid blue and MX. I'm looking to trade it but not sure what the current market value is.
Gracias, geekhackersShow Image(http://i.imgur.com/0CHQBrc.jpg)
I was wondering what yall think the trade value (in dollars) that this BroBot V1 is, it's a,medium toned solid blue and MX. I'm looking to trade it but not sure what the current market value is.
Gracias, geekhackersShow Image(http://i.imgur.com/0CHQBrc.jpg)
It really depends on how much you value it as well as how much the other person you're trying to trade with values it. I'm pretty sure any v1 was just sold on ebay not too long ago though so I'd recommend checking for that sale.
I was wondering what yall think the trade value (in dollars) that this BroBot V1 is, it's a,medium toned solid blue and MX. I'm looking to trade it but not sure what the current market value is.
Gracias, geekhackersShow Image(http://i.imgur.com/0CHQBrc.jpg)
It really depends on how much you value it as well as how much the other person you're trying to trade with values it. I'm pretty sure any v1 was just sold on ebay not too long ago though so I'd recommend checking for that sale.
IMO ebay prices aren't a fair representation. Lots of scalping there where buyers are relatively protected for their anonymity and can bid as they want.
I think the V1s sell for $30-50 normally
So there isn't scalping here?
Hah.
So there isn't scalping here?
Hah.
When you're looking at trades there's no point taking the highest price that a BBv1 sold for to compare to the retail price of, let's say, a binge.
So there isn't scalping here?
Hah.
When you're looking at trades there's no point taking the highest price that a BBv1 sold for to compare to the retail price of, let's say, a binge.
Basically what I was thinking. Didn't want to ask too much in trade.
I was wondering what yall think the trade value (in dollars) that this BroBot V1 is, it's a,medium toned solid blue and MX. I'm looking to trade it but not sure what the current market value is.
Gracias, geekhackersShow Image(http://i.imgur.com/0CHQBrc.jpg)
It really depends on how much you value it as well as how much the other person you're trying to trade with values it. I'm pretty sure any v1 was just sold on ebay not too long ago though so I'd recommend checking for that sale.
IMO ebay prices aren't a fair representation. Lots of scalping there where buyers are relatively protected for their anonymity and can bid as they want.
I think the V1s sell for $30-50 normally
How much for a used, black Realforce 87u (45g) that comes with unused yellow keycaps?
Would it be a fair trade for a used, white Realforce 87u (55g)?
I was wondering what yall think the trade value (in dollars) that this BroBot V1 is, it's a,medium toned solid blue and MX. I'm looking to trade it but not sure what the current market value is.
Gracias, geekhackersShow Image(http://i.imgur.com/0CHQBrc.jpg)
It really depends on how much you value it as well as how much the other person you're trying to trade with values it. I'm pretty sure any v1 was just sold on ebay not too long ago though so I'd recommend checking for that sale.
IMO ebay prices aren't a fair representation. Lots of scalping there where buyers are relatively protected for their anonymity and can bid as they want.
I think the V1s sell for $30-50 normally
eBay prices are ****ing stupid lol.
Fully Assembled Duck Viper
- MX Clear 62g spring
- white backlight, red side LED, 3 side acrylic inserts
- GMK Dolch
What's a fair price to pay for a CMYW set if I can find one?
$45-50 new
What's a fair price to pay for a CMYW set if I can find one?
$45-50 new
IMO it depends pretty heavily on which CMYW set you're looking at. billnye's set has more caps (and better IMO) than sherry's, and I think there was a Korean buy that added in some extra caps as well.
What would be a fair asking price for a Type-S HHKB, as-new condition, used for a week or two and with the original box?
GON NS NerD 60 HHKB - 55g korean sprangs, nixdorf blacks, regular black cherry switch tops, ~4 switched will need to be swapped out, I'll provide switches, leds installed
Thanks.
I just sold it earlier today. Slightly cheaper than I would have liked but I didn't want to wait weeks for someone slightly more generous. Sold it for $250 shipped to the US (from Australia) which isn't too bad imo.
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.400-450 for kmacShow Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.Show Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
How much does reanodizing cost usually?
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.400-450 for kmacShow Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
I'm in Brazil. For now, US$1 is about 4x our currency. :-XHere, about $20-25. But I could do it only for the case and feets.
wow, didn't realize it was that low. Might have to get that done sometime.
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Reddit has a much larger user base. You could have done $200 and had a 50% chance of getting an offer.
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Reddit has a much larger user base. You could have done $200 and had a 50% chance of getting an offer.
I sometimes regret being nice ... lol
Poker 3Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
reddit is weird. photos of ugly SA keycap sets or bad memes get hundreds of upvotes but a photo of OG cyrillic dyesubs only gets a few.
Poker 3Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
reddit is weird. photos of ugly SA keycap sets or bad memes get hundreds of upvotes but a photo of OG cyrillic dyesubs only gets a few.
they still do the shoes thing? I never got that
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Reddit has a much larger user base. You could have done $200 and had a 50% chance of getting an offer.
I sometimes regret being nice ... lol
If I list anything else on reddit it's getting some ABSURD price with obo next to it ... lol
Next time, man. Next time. XD
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.Show Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Reddit has a much larger user base. You could have done $200 and had a 50% chance of getting an offer.
I sometimes regret being nice ... lol
If I list anything else on reddit it's getting some ABSURD price with obo next to it ... lol
Next time, man. Next time. XD
Listed my broset on reddit for $100 ...
GH value is $100 ..
Reddit is $100+ , I had 12 offers in 2 minutes
Reddit has a much larger user base. You could have done $200 and had a 50% chance of getting an offer.
I sometimes regret being nice ... lol
If I list anything else on reddit it's getting some ABSURD price with obo next to it ... lol
Next time, man. Next time. XD
Seriously though, it's nuts how fast **** sells on there.
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.Show Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
WTB KMAC :))
BroSet for sale on geekhack for months .. no offers
2 minutes on reddit, more offers than i have fingers
Geekhack buyers are cheap-ass whining pussies.
A KMAC 1.2. Anodized (black case, orange plate and feets), winkeyless, Cherry stabilizer, MX Browns (MX Black springs) and a MX Clear on spacebar, orange leds and stickers.Show Image(http://i.imgur.com/sqedpVs.jpg)
Also, a Ski Data keyset and an original Cherry set with RGB doubleshot.
How much could I ask for all?
WTB KMAC :))
Probably this week. I'll PM you before the thread comes out. :thumb:
Geekhack buyers are cheap-ass whining pussies.We love you too, fohat.
Wasn't there a broho reaper sold for $350USD recently on Reddit?
Wasn't there a broho reaper sold for $350USD recently on Reddit?
That was OG I think however an MX Bro-Ho-Ho did sell for about that much on eBay not too long ago from a certain user with terrible photoshop skillz
but someone here did get the bro-ho-ho
55g rf 10th ae without keycaps...
55g rf 10th ae without keycaps...
-_-
titanium colored digil0g case
55g rf 10th ae without keycaps... smh
vigorously shakes head
-_-
vigorously shakes head-_-
Leave him alone. It's not his fault he's an idiot who keeps his keyboards stacked precariously in a cupboard.
55g rf 10th ae without keycaps... smh, don't wanna explain
titanium colored digil0g case
55g rf 10th ae without keycaps... smh, don't wanna explain
titanium colored digil0g case
TBH if you have a good deal I'd take both.
gmk white on purple? I think it's the full set, will check later, but I'm pretty sure. iso and ansi supportIf they are basically new and its a full set, I'd say someone would pay $80+
gmk white on purple? I think it's the full set, will check later, but I'm pretty sure. iso and ansi supportIf they are basically new and its a full set, I'd say someone would pay $80+
gmk white on purple? I think it's the full set, will check later, but I'm pretty sure. iso and ansi supportIf they are basically new and its a full set, I'd say someone would pay $80+
mint (basically never used, NOS) bolt-modded SSK?
Price check on some random crap I found todayShow Image(http://images.tapatalk-cdn.com/16/01/13/a7cae71c6d90f67c31a2761617b3ee35.jpg)Show Image(http://images.tapatalk-cdn.com/16/01/13/1bfc78f4900b51f1ea361d934b5f7e29.jpg)
How much would a barebones Novatouch be worth?
What is the price of an hammer case ??A genuine hammer case right not the replica? if its the OG hammer case it will be priced around 140-170
Also what are 70 green alps switches worth ?
What is the price of an hammer case ??A genuine hammer case right not the replica? if its the OG hammer case it will be priced around 140-170
Also what are 70 green alps switches worth ?
Green alps I don't know how much they worth per switches but a full board of them is around 100ish
200 is a more realistic price tbhWhat is the price of an hammer case ??A genuine hammer case right not the replica? if its the OG hammer case it will be priced around 140-170
Also what are 70 green alps switches worth ?
Green alps I don't know how much they worth per switches but a full board of them is around 100ish
Genuine one. Thanks for the prices.
We can get one on taobao for 130$ genuine one bro so 160-180 is much more realistic200 is a more realistic price tbhWhat is the price of an hammer case ??A genuine hammer case right not the replica? if its the OG hammer case it will be priced around 140-170
Also what are 70 green alps switches worth ?
Green alps I don't know how much they worth per switches but a full board of them is around 100ish
Genuine one. Thanks for the prices.
Hi gh, price check on an OTD 356 mini? My friend says its about 800-1000 atm depends on the color. Isn't it a bit too... expensive?Well, OTDs are getting more and more expensive so I think that estimate is ok, I'd prob say 800 for both colors (obv not the military one). Kmac happy 350
Also, a silver Kmac happy. Thanks!
Take my word for it. I've sold one myself, and about two months ago a case was sold instantly for that price.We can get one on taobao for 130$ genuine one bro so 160-180 is much more realistic200 is a more realistic price tbhWhat is the price of an hammer case ??A genuine hammer case right not the replica? if its the OG hammer case it will be priced around 140-170
Also what are 70 green alps switches worth ?
Green alps I don't know how much they worth per switches but a full board of them is around 100ish
Genuine one. Thanks for the prices.
I disassembled my old BlackWidow (real MX's) and it has 107 MX Blues mounted to a reasonably thick metal backplate, would anyone buy this for anything?You can remove the switches from the plate by pressing the two notches, and pulling upwards. A used switch is roughly 0.3$ ea
One switch is missing, one switch is stuck after a failed removal, but all of the others appear to be working perfectly.
Hello everyone, I would like to check price on following things:1. $500
1. NIB Cherry G81-3116SDU
2. GMK Red Alert
3. GMK Olivetti
4. BSP Peacock
5. NIB Cherry Doubleshots caps from G80-1800HAU
6. NIB Cherry Doubleshots caps from G80-2551HAD
Thanks in advance! :)
Price check. This seems really high for a used real force, yes?
http://www.ebay.com/ulk/itm/262239104297
Help a brother out and price check these
Jelly POM is missing number 6 on the numpad and space bar was chipped and repaired
Chairman meow stem broke but was repaired and sits well on board
1. $500
2, 3. $200-250 in these parts.
4. $150
5. $100~
6. Hard to say how much they're worth minus the board. Maybe $100?
Anyone know the rough average selling value of a V2 White Face/Red Eye Gasmask?Retail price :thumb:
Just making sure. Cheers!
Price check on some random crap I found todayShow Image(http://images.tapatalk-cdn.com/16/01/13/a7cae71c6d90f67c31a2761617b3ee35.jpg)Show Image(http://images.tapatalk-cdn.com/16/01/13/1bfc78f4900b51f1ea361d934b5f7e29.jpg)
Price check on some random crap I found todayShow Image(http://images.tapatalk-cdn.com/16/01/13/a7cae71c6d90f67c31a2761617b3ee35.jpg)Show Image(http://images.tapatalk-cdn.com/16/01/13/1bfc78f4900b51f1ea361d934b5f7e29.jpg)
might be a little late to the party... but I forget which virtual boy game is actually pretty valuable. one of them is, and it looks like that's got to be almost the full collection. I really liked my virtual boy, but it needed a way to stick on your head without duct tape
Price check on some random crap I found todayShow Image(http://images.tapatalk-cdn.com/16/01/13/a7cae71c6d90f67c31a2761617b3ee35.jpg)Show Image(http://images.tapatalk-cdn.com/16/01/13/1bfc78f4900b51f1ea361d934b5f7e29.jpg)
might be a little late to the party... but I forget which virtual boy game is actually pretty valuable. one of them is, and it looks like that's got to be almost the full collection. I really liked my virtual boy, but it needed a way to stick on your head without duct tape
Waterworld seems to fetch a decent price. Honestly though it's Jwaz's and I was just messing around :D
How much would a barebones Novatouch be worth?
They're on Massdrop right now for $130 + shipping (https://www.massdrop.com/buy/cm-novatouch-barebones)
How much would a barebones Novatouch be worth?
They're on Massdrop right now for $130 + shipping (https://www.massdrop.com/buy/cm-novatouch-barebones)
Thank you, is it advised to sell for $130 then (including shipping)? My novatouch barebones has been used but it is in mint condition.
How about a Bro cap v2?
Glossy Blackout BroBotHow about a Bro cap v2?
Which one? They could go for about $150, maybe more.
Also how about a printed white HHKB keycap set?
You really are reddit in a nutshellHow about a Bro cap v2?
Which one? They could go for about $150, maybe more.
Glossy Blackout BroBotHow about a Bro cap v2?
Which one? They could go for about $150, maybe more.
You really are reddit in a nutshellHow about a Bro cap v2?
Which one? They could go for about $150, maybe more.
It's for a trade anyway just want to check how much it's worth exchanging it for. Don't worry I won't sell it on ebay ;)
It's for a trade anyway just want to check how much it's worth exchanging it for. Don't worry I won't sell it on ebay ;)
If you sold it on ebay you'd be selling your soul.
**** ebay and they're cancerous scams
It's for a trade anyway just want to check how much it's worth exchanging it for. Don't worry I won't sell it on ebay ;)
If you sold it on ebay you'd be selling your soul.
**** ebay and they're cancerous scams
I take it you had a bad time with them?
How much does loose alps worth?
not really asking price value, but how rare is julycicle.
How many where possibly made?
Oh yeah I'm sorry the Blue SKCM alps :thumb:How much does loose alps worth?
Which color
Oh yeah I'm sorry the Blue SKCM alps :thumb:How much does loose alps worth?
Which color
Oh yeah I'm sorry the Blue SKCM alps :thumb:How much does loose alps worth?
Which color
what about 1.2-1.5$ per switch?
thank you :thumb:what about 1.2-1.5$ per switch?
I could see people paying that.
what about 1.2-1.5$ per switch?
Is this switch really that good? Waiting for mine in the mail but I wanted to buy a custom so I need to sell this. But we'll see if I enjoy it or nahwhat about 1.2-1.5$ per switch?
I'd buy that
Don't tempt me to sell it brotha. Need more customs thoIs this switch really that good? Waiting for mine in the mail but I wanted to buy a custom so I need to sell this. But we'll see if I enjoy it or nahwhat about 1.2-1.5$ per switch?
I'd buy that
not that good
I am looking for 1 or 2 Cherry MX Lock switch.
Any idea how much do I need to fork out to get at least 1?
Thanks!
Highest I've seen is $10 lowest $4
I'm looking for a 60% PCB (Poker/II or GH60). How much can I pay for it?
If you're patient on shipping, Jack at ortholinearkeyboards.com had some last I looked. He's backed up on Planck Massdrop orders.I am looking for 1 or 2 Cherry MX Lock switch.
Any idea how much do I need to fork out to get at least 1?
Thanks!
Highest I've seen is $10 lowest $4
Hmm, alright. :)
I'll try and look around before opening a WTB.
Cheers man.
How about a 356CL?3-5k
How about a 356CL?Do you want sell one?
How about a 356CL?Do you want sell one?
While we are at it...how much should I expect to pay for a 356.2 assuming I could even find one?1.6k+
Arent the CL's only worth that much unassembled?
Retro DSA with the following:Turtle 80-100$
1 RDSA-DCS - 6.2 UNIT UNIV SPACEBAR - BROWN (TBN) (space625)
12 RDSA-DSA - 1.5X - BROWN (TBN) KEY (blk150)
4 RDSA-DSA - 2X - BROWN (TBN) KEY (blk200)
1 RDSA-DSA - 6 UNIT SPACE BAR - BROWN (TBN) (space600dsa)
1 RDSA-DSA - 6.2 UNIT SPACE BAR - BROWN (TBN) (space625dsa)
2 RDSA-DSA - 7 UNIT SPACE BAR - BROWN (TBN) (space700dsa)
1 RDSA-KIT 1 - EXTENDED ALPHA SET (alpha)
1 RDSA-KIT 2 - TKL + WINKEYLESS + CAPSLOCK SET (tkl)
1 RDSA-KIT 4 - NUMPAD SET (numpad)
1 RDSA-KIT 6 - C64 NOSTALGIA KEY (c64)
1 RDSA-KIT 7 - 1.0 MODS SET (mod100)
Retro GeekHack Key
Retro Refresh Key
Retro WASD Set
Retro Arrow Set
Turtle Power - Base, Mod, Tsangan, Geekhack key
DSA Skull Squadron with the following:
skull-squadron-sets: Base Set
skull-squadron-sets: 7 Unit Spacebar
skull-squadron-sets: Additional Modifiers
skull-squadron-sets: Numpad Set
skull-squadron-sets: 60% Black Stripe
DSA Granite V1 with the following:
Granite Set (PBT, dye-sub, DSA)
Granite Icon Modifiers
Granite Icon Pro Modifiers
Granite 7u Spacebar
Granite Icon RGB
Granite Cyrillic: RU, UA
Granite Numpad
DSA Dolch V1 - DSA Dolch 110 Key Base set, Tenkey kit, Gamer kit, LED set #1, Two LED set #2
Purple BroCaps set
LZ-CE 60% Aluminum case gold body with black accent stripe
Everything is new/unused essentially.
used corsair k65 RGB?
I was thinking of posting it for $100 shipped? ( about $40 off retail? )
my friend want to sell this board..The condition of the board is bad 60$ max for me
how much this board worth?Show Image(http://i64.tinypic.com/b6ukj9.jpg)
vintage blue switch
my friend want to sell this board..
how much this board worth?Show Image(http://i64.tinypic.com/b6ukj9.jpg)
vintage blue switch
The caps are not in good condition thomy friend want to sell this board..
how much this board worth?Show Image(http://i64.tinypic.com/b6ukj9.jpg)
vintage blue switch
If the keycaps are OG Dolch, it's worth ~$70 just for those.
Not sure if the board is dirty or if just a poorly lit photo. These boards can be a little hard to price sometimes since they can be bought for cheap in China, but don't show up terribly too often for sale at least around here. For a MX Blue one, $~130 + shipping would be fair for one already in the area (caps+board).
The caps are not in good condition tho
i've got a poker 2 white mx red pcb + stock white pbt caps, no clue how much it's worth.
got it used, it's got three purple led's soldered onto W/A/D, looks like it had one on S but it was removed and one of the pads were torn off.
anyone know how much it's worth?
A Filco Majestouch 2 Full Multicam with MX Blacks. (used and in immaculate condition.)Show Image(http://www.keyboardco.com/keyboard_images/filco_majestouch_camouflage_us_multimedia_large.jpg)
The caps are not in good condition tho
There isn't enough light in the original photo to determine shininess...
gadzkun is lucky this isn't a HAU otherwise I would have PM'd in a hearbeat, it is my favorite plastic case board of all :P
yeah i was think the same about the photo..
this HFU right?
so maybe next time i should tease you with "my friend got HAU and want to sell it" hahhahaha :p
btw ty dude for the info :thumb:
Price for a silver ducky legend keyboard with blue mx switches, modded with white LED's and removable USB cord (standard USB cord included)?
whats the going rate for a mid 80's silver label model M.
In working order, cable included, clean shape.
Full size Filco Majestouch 2 with browns. The caps are shiny.100-120$
How much?
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
I don't remember how much. I tried looking.How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
I don't remember how much. I tried looking.How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
Price check: Hyperfuse GMK
I bought two kits to support the GB, but now with the GLOB AWFUL Canadian Dollar I'm thinking it's a good way to recoup some funds to spend on new GBs (I'm looking at Flatline). For example with todays exchange rate buying HyperFused in the GB would have cost me $190 CAD.... lol
I've seen $180-185 shipped on mech market, so I'm gussing that's a top end price? For me a tracked package costs and arm and a leg as Canada Post is awful :(
Cheers, bros!
Yea. Why? You think I shouldnt?I don't remember how much. I tried looking.How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
Are you really going to sell those though? Recall the V2s have been discontinued. You've got some classic caps there. :thumb:
Yea. Why? You think I shouldnt?I don't remember how much. I tried looking.How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
Are you really going to sell those though? Recall the V2s have been discontinued. You've got some classic caps there. :thumb:
That's what I want to do but I want to sell them for a fair price.Yea. Why? You think I shouldnt?I don't remember how much. I tried looking.How much?Retail price
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
Are you really going to sell those though? Recall the V2s have been discontinued. You've got some classic caps there. :thumb:
I think that's a personal choice for you to make. If you need the money then you gotta do what you gotta do. If you're not using them and would like to return them to the community (sell them) then that's great too.
Price check: Hyperfuse GMK
I bought two kits to support the GB, but now with the GLOB AWFUL Canadian Dollar I'm thinking it's a good way to recoup some funds to spend on new GBs (I'm looking at Flatline). For example with todays exchange rate buying HyperFuse in the GB would have cost me $190 CAD.... lol
I've seen $180-185 shipped on mech market, so I'm gussing that's a top end price? For me a tracked package costs and arm and a leg as Canada Post is awful :(
Cheers, bros!
Brocap - stardustShow Image(http://imgur.com/zfaTubp.jpg)
And this one. I don't know which it is. I think it's from the 420 sale.Show Image(http://imgur.com/KqTnoXv.jpg)
Yea. Why? You think I shouldnt?
A used, complete Model M SSK? Is there a difference between white/blue label ones, or incomplete ones, as well?170-190
I've been looking around at older valuations, but I remember people noting that their prices have been all over the place so I'd like to get a more realistic and current price check if possible!
I'm in the market for one and I know they're keepers, but one can only hope! ;D
A used, complete Model M SSK? Is there a difference between white/blue label ones, or incomplete ones, as well?
I've been looking around at older valuations, but I remember people noting that their prices have been all over the place so I'd like to get a more realistic and current price check if possible!
I'm in the market for one and I know they're keepers, but one can only hope! ;D
58 topre stems?This is hard to check for price
58 topre stems?
Are the 55g kmod and 55gt sirian springs rare? What's a set run?
Also 62gt and 50gt springs.
Price check on complete, caps excluded, Kishsaver?400$ish?
Price check on complete, caps excluded, Kishsaver?
Price check on complete, caps excluded, Kishsaver?
I have no idea, it seems like a moving target. At a certain level of rarity, items do not hit the market often enough to establish a base line.
While things like Kishsavers and Unsavers seem to be Holy Grails for so many people, <$500 prices are usually bandied around (in talk, that is, are they ever actually listed for those prices?) for them, while industrial SSKs have consistently sold near or above $1K. I would have expected it to be the other way around, but apparently not.
They were full metal case in factory trim anyway. But I wonder what the price of originals is going to do once Ellipse's start hitting the market. The reason I am asking is I was debating on picking up a new one in hopes of trading to someone that either hasn't gotten around to converting or doesn't have the ability to. And was curious how out of the question this would sound.Price check on complete, caps excluded, Kishsaver?
I have no idea, it seems like a moving target. At a certain level of rarity, items do not hit the market often enough to establish a base line.
While things like Kishsavers and Unsavers seem to be Holy Grails for so many people, <$500 prices are usually bandied around (in talk, that is, are they ever actually listed for those prices?) for them, while industrial SSKs have consistently sold near or above $1K. I would have expected it to be the other way around, but apparently not.
I would pay $500-600 for a Kishsaver...if it had the keycaps. But w/o caps, it's missing some of those awesome legends (PD1, PD2, etc). $400+ for one without caps seems reasonable, many who would be looking for one will probably settle for the upcoming GB.
They are listed for around those prices. Last time I saw one, it was full-aluminum for $425.
it's missing some of those awesome legends (PD1, PD2, etc).
They are listed for around those prices. Last time I saw one, it was full-aluminum for $425.
What are the hard-to-find "awesome legends" just out of curiosity? I have dismantled several M/F terminals and I probably have a bag of non-standard keys such as PD1.
I've only seen PD3 on a F62. I guess the rest could be taken from a F122, if the stepped Enter and Reset keys are 1.5u.
I just picked up a leading edge DC 2014 with blue alps. What are these things worth?
Not sure...given the hype around blue alps recently. I don't see why someone wouldn't pay $1-1.25 per switch. Not really sure how significant the case/caps are in terms of value.
I just picked up a leading edge DC 2014 with blue alps. What are these things worth?I picked mine up for 80$ + shipping, but that seems to be a decent deal after seeing some of the ebay listings recently. This keyboard has fewer switches than some of those did though, not sure if it matters all that much.
Price for a silver ducky legend keyboard with blue mx switches, modded with white LED's and removable USB cord (standard USB cord included)?
Anyone have any input?
Price for a silver ducky legend keyboard with blue mx switches, modded with white LED's and removable USB cord (standard USB cord included)?
Anyone have any input?
:'(
Price for a silver ducky legend keyboard with blue mx switches, modded with white LED's and removable USB cord (standard USB cord included)?
Anyone have any input?
:'(
Sorry you've not gotten any input. It goes for $140 new, and LEDs are standard, so maybe $120? Depending on what USB you're using that could also affect the price. I'd have to see the specific one though.
Price check for 360c?1k+ sadly
Thank you :thumb:Price check for 360c?1k+ sadly
how much is a used quickfire rapid w/ mx blues, no case, no accessories, or caps worth? just pcb/plate/switches
Accidentally asked in a wrong thread earlier. :-[ Can anyone tell me the value on a Logitech G710+ without wrist rest or box?According to pcpartpicker, it's going for $80 at the cheapest end, with over $100 on the high end brand new. So I'd think at least $50-60.
Edit: Here's a pic of itShow Image(http://i.imgur.com/PPWtoxE.jpg)
I traded a bunch of non-keyboard related stuff and got it with some stuff. Don't know if I can trade it for a board or if I should trade it for an Artisan or two.
Brand new in box Ducky Shine 3 dk9008? Thank you!
I forgot to mention switches--blue. So $80 would be a really good deal then, huh?Brand new in box Ducky Shine 3 dk9008? Thank you!
I'd say $100.
I forgot to mention switches--blue. So $80 would be a really good deal then, huh?Brand new in box Ducky Shine 3 dk9008? Thank you!
I'd say $100.
Good to know. So now the question is am I really going to feel anything different than Logtich g710 or the tvs e-gold which both also have blues.I forgot to mention switches--blue. So $80 would be a really good deal then, huh?Brand new in box Ducky Shine 3 dk9008? Thank you!
I'd say $100.
I would say so. They go for about $100-110 retail, but they've been out of stock for a while. $90-100 BNIB would be fair, and $80 seems very good to me.
Grafiti slim 60% foam rest
Grafiti slim 60% foam rest
Looks like they go for $15 (without shipping) new, so maybe $10?
how much is a KMAC 2.0 titanium kit worth? unbuilt, unused400-450
how much is a KMAC 2.0 titanium kit worth? unbuilt, unused400-450
Super clean 1986 Model M.I think that is a really good price for a clean and working ibm board!
I was thinking $60 shipped ( shipping is a b-word with these )
(http://i112.photobucket.com/albums/n193/clayfinley/IMG_20160203_215256_zpsvpnjxghq.jpg) (http://s112.photobucket.com/user/clayfinley/media/IMG_20160203_215256_zpsvpnjxghq.jpg.html)
Works great, cable included.
Super clean 1986 Model M.
I was thinking $60 shipped
Works great, cable included.
Yep look at that label really beautifulSuper clean 1986 Model M.
I was thinking $60 shipped
Works great, cable included.
Too low. You should easily get $85-$100 shipped for that, more if you are patient.
That is the most desirable M of all, in my opinion.
How much does a Bro Skoll Lycan usually go for?
How much does a Bro Skoll Lycan usually go for?Retail
How much does a Bro Skoll Lycan usually go for?
How much does a Bro Skoll Lycan usually go for?
$100 with a free ban from any future sales.
A digilog case?~350
How much for tested / working tactile brown alps per switch?
Hey, I'm looking to buy/trade a plum grumpkin.
What should I offer for such a cap?(in $)
They were $30 in the raffle.
Hey, I'm looking to buy/trade a plum grumpkin.
What should I offer for such a cap?(in $)
They were $30 in the raffle.
You should offer retail and hope that someone is willing to sell at that price.
Hey, I'm looking to buy/trade a plum grumpkin.
What should I offer for such a cap?(in $)
They were $30 in the raffle.
You should offer retail and hope that someone is willing to sell at that price.
That is what I'm doing ghehe..
But I never get replies after that =/
Hey, I'm looking to buy/trade a plum grumpkin.
What should I offer for such a cap?(in $)
They were $30 in the raffle.
You should offer retail and hope that someone is willing to sell at that price.
That is what I'm doing ghehe..
But I never get replies after that =/
In that case if you find someone with the cap, ask them what they would like for it. Sometimes people will ask for a little more to cover shipping and whatnot, or they'll ask for a huge amount. At that point you can respectfully decline.
Hey guys,
How much are my two keyboards worth ? One is a ducky shine zero and the other an IMB model M 122 which has been converted to usb using tmk_software on a teensey. The number pad can be a little finicky I believe this is due to some of the plastic rivets coming loose. The model m has been cleaned and some keys changed , but all the originals are still available as well.
http://imgur.com/a/yRALb
Hello,
I am thinking about selling my ErgoDox that I picked up a little over a year ago. I have barely used it and I just want to see it go to a good home. It has the standard acrylic case and I used MX Blacks for my build. I was wondering what you guys think it might be worth? Caps would not be included.Show Image(http://i.imgur.com/uoHqi1S.jpg)
Thanks in advance!
Hey guys,
How much are my two keyboards worth ? One is a ducky shine zero and the other an IMB model M 122 which has been converted to usb using tmk_software on a teensey. The number pad can be a little finicky I believe this is due to some of the plastic rivets coming loose. The model m has been cleaned and some keys changed , but all the originals are still available as well.
http://imgur.com/a/yRALb
I would say the Ducky Shine Zero would go for $80-100. If I were making a posting I'd start at $100, shipped. No clue about the Model M though.
Hello,
I am thinking about selling my ErgoDox that I picked up a little over a year ago. I have barely used it and I just want to see it go to a good home. It has the standard acrylic case and I used MX Blacks for my build. I was wondering what you guys think it might be worth? Caps would not be included.Show Image(http://i.imgur.com/uoHqi1S.jpg)
Thanks in advance!
Hey guys,
How much are my two keyboards worth ? One is a ducky shine zero and the other an IMB model M 122 which has been converted to usb using tmk_software on a teensey. The number pad can be a little finicky I believe this is due to some of the plastic rivets coming loose. The model m has been cleaned and some keys changed , but all the originals are still available as well.
http://imgur.com/a/yRALb
I would say the Ducky Shine Zero would go for $80-100. If I were making a posting I'd start at $100, shipped. No clue about the Model M though.Hello,
I am thinking about selling my ErgoDox that I picked up a little over a year ago. I have barely used it and I just want to see it go to a good home. It has the standard acrylic case and I used MX Blacks for my build. I was wondering what you guys think it might be worth? Caps would not be included.Show Image(http://i.imgur.com/uoHqi1S.jpg)
Thanks in advance!
The newest Ergodox just dropped for about $200 as a kit. Maybe start around there?
Hello,
I am thinking about selling my ErgoDox that I picked up a little over a year ago. I have barely used it and I just want to see it go to a good home. It has the standard acrylic case and I used MX Blacks for my build. I was wondering what you guys think it might be worth? Caps would not be included.Show Image(http://i.imgur.com/uoHqi1S.jpg)
Thanks in advance!
What color is the PCB on this? Kind of want this.
LZ-FE and tgr-JaneMan what happens?
LZ-FE and tgr-JaneMan what happens?
I know kmac is good but this makes me want it more!! You should calculate the total for both, sell it for how much you pay for itLZ-FE and tgr-JaneMan what happens?
Its cleaning time, keep the kmacs, get rid of the rest. :)
used hypersphere rings? Or should I give them away hehe....How used? I might be interested.
Some unassembled 360C(orsa)s Apple silver and Hyper grey..
and a 356mini v1 black...
Market values please :P
used hypersphere rings? Or should I give them away hehe....
Some unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please :P
I love to see this otd board sells for their gb value cause I have the GB cost list of all korean customSome unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please
I love to see this otd board sells for their gb value cause I have the GB cost list of all korean customSome unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please
Some unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please :P
10 dolla fo half listI love to see this otd board sells for their gb value cause I have the GB cost list of all korean customSome unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please
You should share that list in a thread. It would be quite helpful. :thumb:
10 dolla fo half listI love to see this otd board sells for their gb value cause I have the GB cost list of all korean customSome unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please
You should share that list in a thread. It would be quite helpful. :thumb:
20 dolla fo full list
(Read this in indian accent)
Nah this is the list for the GB price :
Where is my 20$? Haha. It throws me off how much the gb price compared to the aftermarket price10 dolla fo half listI love to see this otd board sells for their gb value cause I have the GB cost list of all korean customSome unassembled 360C(orsa)s Apple silver and Hyper grey..Market value is GB price bub.
and a 356mini v1 black...
Market values please
You should share that list in a thread. It would be quite helpful. :thumb:
20 dolla fo full list
(Read this in indian accent)
Nah this is the list for the GB price :
Thanks very much!
How much are worth these zinc caps?Anyone?Show Image(http://i.imgur.com/B6pkOOM.jpg)
Also, how much for a fullsize Filco Majestouch 2 ISO with black switches used 1 year with box and dust cover?
Thanks.
How much is Dolch Color Pack (unused)?
Vintage Nixdorf Cherry switches, old blacks with clear topsLike $2-3 per switch.
doesnt look like any have sold since 2013 or 2014 according to the ever reliable search
1 full Nixdorf PCBdamn that is a load of rare board I can say 2$ per switches for the nixdorf sell it to me please :p
G81-8904 HPBRB (Russian doubleshot 1.25 layout)
G80 5000 HAMRB (Russian doubleshot 5000)
G80 2100 HDU
Olivetti dyesub set ANSI
1 full Nixdorf PCB
G81-8904 HPBRB (Russian doubleshot 1.25 layout)
G80 5000 HAMRB (Russian doubleshot 5000)
G80 2100 HDU
Olivetti dyesub set ANSI
1 full Nixdorf PCB
G81-8904 HPBRB (Russian doubleshot 1.25 layout)
G80 5000 HAMRB (Russian doubleshot 5000)
G80 2100 HDU
Olivetti dyesub set ANSI
what was the retail price on the sls hemo two toned esc key? Thanks
75 too much for a bloodlust lycan?
75 too much for a bloodlust lycan?
In my opinion, yes.
You shouldn't pay over retail for artisans.
1 full Nixdorf PCB
G81-8904 HPBRB (Russian doubleshot 1.25 layout)
G80 5000 HAMRB (Russian doubleshot 5000)
G80 2100 HDU
Olivetti dyesub set ANSI
Nixdorfs have gone down in price a lot recently, I'd saw it'd be good if you could get $300 out of it. I picked up a set for $200 though.
75 too much for a bloodlust lycan?
In my opinion, yes.
You shouldn't pay over retail for artisans.
yeah exactly what I thought =/
Would do retail + their shipping + my shipping.
Wich would be around 50 dollar I guess -.-
People are so greedy T.T
I have two keyboards I have been thinking about getting rid of, not sure how to price them, any input would be appreciated.
1. Backlit Poker 2 with reds, Pulse SA keyset with 60% stripe and deep beets sets, blue tex aluminum lipless case with feet.
2. Full custom. FaceW SPiRiT white pcb, Mass Drop Cyan plate, Zealio Purple / Clear Skullthulu https://imgur.com/KZTXkXt (https://imgur.com/KZTXkXt) , Zeal 67 g tactile switches with gold sip sockets, Gold stabs on 2u keys, standard ansi layout with 1.75 right shift and 1u function key, Purple tex aluminum lipless case with silver feet, DCS Hyperfuse caps, currently has mix of purple and blue leds.
Second try....CM Storm Quickfire Pro (partially backlit) with cherry mx browns?
Agreed. No reason to pay that much for a price of plastic. Patience is a virtue!75 too much for a bloodlust lycan?
In my opinion, yes.
You shouldn't pay over retail for artisans.
Second try....CM Storm Quickfire Pro (partially backlit) with cherry mx browns?
Which one is the Quickfire Pro? And what do you mean by "partially backlit"? Some of the LEDs are burned out?
Second try....CM Storm Quickfire Pro (partially backlit) with cherry mx browns?
Which one is the Quickfire Pro? And what do you mean by "partially backlit"? Some of the LEDs are burned out?
It's full size, everything the same and the Quickfire Ultimate, except for being only partially backlit. You can google quickfire pro, go to images and see what i'm referring to.
Have not been here in a while and have some stuff I would like to get fair market value for:
HHKB pro 2 white, dental banded.
Click Clack 3D topre
Topre Christmas set.
What would everything go for? Thanks :)
Have not been here in a while and have some stuff I would like to get fair market value for:
HHKB pro 2 white, dental banded.
Click Clack 3D topre
Topre Christmas set.
What would everything go for? Thanks :)
HHKB Pro - $210
3D Clack - Varies wildly, but I'd say at least $150
Topre Christmas set - No idea what this is, I'm afraid.
Have not been here in a while and have some stuff I would like to get fair market value for:
HHKB pro 2 white, dental banded.
Click Clack 3D topre
Topre Christmas set.
What would everything go for? Thanks :)
HHKB Pro - $210
3D Clack - Varies wildly, but I'd say at least $150
Topre Christmas set - No idea what this is, I'm afraid.
Thanks for quick reply. I am not sure why it was called christmas set? but its the blue and red Esc and Control key. Just did an ebay search and you can grab them for $30 (PFU color key top set)
Have not been here in a while and have some stuff I would like to get fair market value for:
HHKB pro 2 white, dental banded.
Click Clack 3D topre
Topre Christmas set.
What would everything go for? Thanks :)
Hey Guys!I'd ask photek!
Price check on:
G80-2100HDU NIB
ESA-3000-HASRO
G81-8904HPBRB NIB
G81-3004LANCH
Poker 1 MX red
DT R3 2011 complete set
Nixdorf (from Berlin International Airport Terminal kbd) MX Black & MX Linear White Switch Set
anyone from dong squad still active? you guys really know your stuff, also any mods who are active right now, I need all the help I can get for this price check from the experts! :) thanks!
I'd ask photek!
Anyone know how much Krap Crowned Skulls tend to flip for I want to look into buying one and don't want to pay too much.
Help fam... I'm gonna sell my lightsaver V2 blk and I can't even remember what I paid for it :/450 for the kit?
Hoof built it... don't hold that against me xD
something like that... I won't charge for building it cause hoof did it for free!!! what a babe!!!Help fam... I'm gonna sell my lightsaver V2 blk and I can't even remember what I paid for it :/450 for the kit?
Hoof built it... don't hold that against me xD
something like that... I won't charge for building it cause hoof did it for free!!! what a babe!!!Help fam... I'm gonna sell my lightsaver V2 blk and I can't even remember what I paid for it :/450 for the kit?
Hoof built it... don't hold that against me xD
howdy!
i would like a price check onnn:
v1 strawberry n cream meowcap mx
feast of blood lycan mx
noted! i'm a bit more keen on trading for stuff anyways but its nice to have a price point to keep in mindhowdy!
i would like a price check onnn:
v1 strawberry n cream meowcap mx
feast of blood lycan mx
Hey there!
Market prices are:
V1 Strawberry 'n Cream Meowcap (MX) - $35
Feast of Blood Lycan (MX) - $50
Please note, most artisans would like you to sell at the retail price. It makes things nicer for everyone. However, market value varies wildly, and those two caps could probably fetch more.
Hey geeks, sorry if this has been answered anywhere before, but I honestly don't want to scourge 125 pages of this thread, does anyone have a reasonable price on any blue alps keyboard? Like what should I reasonably pay? Last one that I saw sold on ebay was a Focus FK-2001 that sold for $360, and then there's an Acer KB-101A for $650, which seems astronomical to me. And if this is even a question that can be answered or guaged, how much would a custom TKL, specifically the Orion V2, with blue alps, and keycaps, go for?That acer kb101 is just a joke. I think 1.5-2$ per switch is reasonable
Hey geeks, sorry if this has been answered anywhere before, but I honestly don't want to scourge 125 pages of this thread, does anyone have a reasonable price on any blue alps keyboard? Like what should I reasonably pay? Last one that I saw sold on ebay was a Focus FK-2001 that sold for $360, and then there's an Acer KB-101A for $650, which seems astronomical to me. And if this is even a question that can be answered or guaged, how much would a custom TKL, specifically the Orion V2, with blue alps, and keycaps, go for?That acer kb101 is just a joke. I think 1.5-2$ per switch is reasonable
bolt modded Model M SSK, USB teensy modded, backplate painted
Model F 50 keys, USB teensy modded
Model F AT, USB teensy modded, normal space bar modded, ANSI modded, alt keys added, plate dremeled and painted
(also have 2 of these, I cut the plates differently so the only difference should be minor and inside. One is painted white the other black.)
Model F Bigfoot, stock
Model F AT, stock
Poker
On all stock boards, NIB 10 under retail, good condition 20 under retail, bad condition 30 under retail etc.
Jailhouse blues keyboards
CM QFR, switch moddable plate
Filco Majestouch 2 bluetooth, switch moddable plate
Filco Minila, switch moddable plate
Poker
Filco Majestouch 2 non bluetooth, switch moddable plate
Deck Legend, SIP modded, switch moddable plate, casing painted dark green
Ducky Shine 3, SIP modded, switch moddable plate
Cherry G80-1950, teensy modded and matrix programmed
programmable numpads
Clears/ Ergo clears modded.
CM QFR
KBT Race with aluminum casing, SIP and LED modded (originally not a backlit model)
Ducky Shine 3 stock clears, LED modded but not SIP mod so you can't change colours without desoldering
Filco Majestouch 1 stock clears, no lubing
Filco Majestouch 1 TKL
PLU TKL
Corsair Vengeance 95, SIP modded, ergo clears on macro keys and stock lubed clears on main keys.
Deck Legend, SIP modded, switch moddable plate, casing painted white
Cooler Master XT
NO switches
Cherry G80-1950, teensy modded and matrix programmed but I took out the stems and springs to use elsewhere.
Filco Majestouch 2 TKL (desoldered and taken apart)
TG3 82 key (desoldered and taken apart)
WEY-2000 (intact except for stems and springs removed)
Stock
Ducky Shine 3
Deck Legend frost (clears), NIB
Deko Pinnacle keyboard, NIB but opened before
Kensington Expert Mouse (opened before but not modded)
Kensington Slimblade
Kensington orbit wireless trackball
Reuters G80-9009 HAU
Redscarf3 / RS96
I have an extra one laying around, and currently its not built up, ( just case, pcb, plate ) though i'm thinking of building it up, and selling it as a complete with keycaps, switches, everything. ( or maybe in an unassembled kit )
Not sure if i should sell the basic kit, or a full kit, and how much i should ask for it.
i'd have to disagree the rs96 is readily available on taobao for about $160. Going with the cheapest proxy fees can go up to ~$60 for shipping and handling fees.Redscarf3 / RS96
I have an extra one laying around, and currently its not built up, ( just case, pcb, plate ) though i'm thinking of building it up, and selling it as a complete with keycaps, switches, everything. ( or maybe in an unassembled kit )
Not sure if i should sell the basic kit, or a full kit, and how much i should ask for it.
When I bought my RS96 kit in the beginning of my custom adventure I paid $175 for a kit. I ended up selling it for $300 fully assembled but that was with gold stabs, gold springs, sip sockets, and LEDs added. Either way I think those prices are rather fair for both the kit or assembled.
PC: QFR w/ Ergo Clears, no keycaps
PC: QFR w/ Ergo Clears, no keycaps
Would guess $130
i'd have to disagree the rs96 is readily available on taobao for about $160. Going with the cheapest proxy fees can go up to ~$60 for shipping and handling fees.Redscarf3 / RS96
I have an extra one laying around, and currently its not built up, ( just case, pcb, plate ) though i'm thinking of building it up, and selling it as a complete with keycaps, switches, everything. ( or maybe in an unassembled kit )
Not sure if i should sell the basic kit, or a full kit, and how much i should ask for it.
When I bought my RS96 kit in the beginning of my custom adventure I paid $175 for a kit. I ended up selling it for $300 fully assembled but that was with gold stabs, gold springs, sip sockets, and LEDs added. Either way I think those prices are rather fair for both the kit or assembled.
PC: QFR w/ Ergo Clears, no keycaps
Would guess $130
Hmm, seems like a lot. I'll use that as an upper bound though. Thanks!
Hey Guys!
Price check on:
G80-2100HDU NIB
ESA-3000-HASRO
G81-8904HPBRB NIB
G81-3004LANCH
Poker 1 MX red
DT R3 2011 complete set
Nixdorf (from Berlin International Airport Terminal kbd) MX Black & MX Linear White Switch Set
anyone from dong squad still active? you guys really know your stuff, also any mods who are active right now, I need all the help I can get for this price check from the experts! :) thanks!
PC: QFR w/ Ergo Clears, no keycaps
Would guess $130
Hmm, seems like a lot. I'll use that as an upper bound though. Thanks!
Was assuming $60 for the used board, $50 for switches, $20 for springs. I didn't take anything further off because ergo clears were pretty desirable last time I checked. If that's no longer the case, $105 might be more accurate. Probably worth closer to $130 to someone who can't solder.
i'd have to disagree the rs96 is readily available on taobao for about $160. Going with the cheapest proxy fees can go up to ~$60 for shipping and handling fees.Redscarf3 / RS96
I have an extra one laying around, and currently its not built up, ( just case, pcb, plate ) though i'm thinking of building it up, and selling it as a complete with keycaps, switches, everything. ( or maybe in an unassembled kit )
Not sure if i should sell the basic kit, or a full kit, and how much i should ask for it.
When I bought my RS96 kit in the beginning of my custom adventure I paid $175 for a kit. I ended up selling it for $300 fully assembled but that was with gold stabs, gold springs, sip sockets, and LEDs added. Either way I think those prices are rather fair for both the kit or assembled.
But he also got it from the GB which was a cheaper price.
What is a reasonable price for Modern Selectric base set, blue modifiers, colemak, and unix pack?
I have a black Filco Majestouch-2, blue switches, with ISO layout. Odd thing is I'm in the US. Need to sell this by Thursday, what should I set as price?
What is a reasonable price for Modern Selectric base set, blue modifiers, colemak, and unix pack?I have a black Filco Majestouch-2, blue switches, with ISO layout. Odd thing is I'm in the US. Need to sell this by Thursday, what should I set as price?
So how many accounts do you have?
What is a reasonable price for Modern Selectric base set, blue modifiers, colemak, and unix pack?I have a black Filco Majestouch-2, blue switches, with ISO layout. Odd thing is I'm in the US. Need to sell this by Thursday, what should I set as price?
So how many accounts do you have?
Well just two. brsp25 is years old. I decided to make a new one since I am getting back into mechanical keyboards and don't use that handle anymore. Would have been nice if you PMd me about it though.
What is a reasonable price for Modern Selectric base set, blue modifiers, colemak, and unix pack?I have a black Filco Majestouch-2, blue switches, with ISO layout. Odd thing is I'm in the US. Need to sell this by Thursday, what should I set as price?
So how many accounts do you have?
Well just two. brsp25 is years old. I decided to make a new one since I am getting back into mechanical keyboards and don't use that handle anymore. Would have been nice if you PMd me about it though.
Got a couple of keycaps I'll selling in the near future to pay for the new 1976 SA drop.
What would be the going rates for the following:
- WOB Aqua Blue
- R.O.G. Blue/Green Chrysanthemum
- R.O.G. Blue/Orange
Assuming I can find one...how much should I expect to pay for an IBM Unsaver? 1387033.
How much would I usually have to pay for a Conservative Red Brobot V2?
Thanks in advance!
Are relegendables from Cherry POS keyboards and Genovation keypads worth anything? I HATE relegendables and will be hocking them as soon as I get replacements.
Are relegendables from Cherry POS keyboards and Genovation keypads worth anything? I HATE relegendables and will be hocking them as soon as I get replacements.
Typically that just depends on if someone is looking for them.
Hi guys, can I get a price check on:
Single color clacks: Blue one and Purple one
Reaper v1: Bro Ho Ho
Green BBv2
Many thanks!
Hi guys, can I get a price check on:
Single color clacks: Blue one and Purple one
Reaper v1: Bro Ho Ho
Green BBv2
Many thanks!
The last brohoho i saw sold was like $330 or something like that and most bbv2's go anywhere from $150 -$200 from what i've seen. Clacks are always $200 plus
Hi guys, can I get a price check on:
Single color clacks: Blue one and Purple one
Reaper v1: Bro Ho Ho
Green BBv2
Many thanks!
The last brohoho i saw sold was like $330 or something like that and most bbv2's go anywhere from $150 -$200 from what i've seen. Clacks are always $200 plus
Ye I saw that $330, but I remember it was CA$. Still quite something tho. For clacks even single color will cost me over 200+? BBv2 sounds about right.Hi guys, can I get a price check on:
Single color clacks: Blue one and Purple one
Reaper v1: Bro Ho Ho
Green BBv2
Many thanks!
Completely depends on where/how you sell them (here, r/MechMarket, or eBay), here are some prices I've personally witnessed:
Single color: 240+
Reaper v1 Bro Ho Ho: 280+
Green BBv2: 140+
Thanks for the reply!
I no longer need my SP Retro ErgoDox kit. It is in perfect condition and was only used for a matter of days before I realized I didn't like my ErgoDox lol.
How much do you think it's worth?
Here is a pic:Show Image(http://i.imgur.com/NcccSY6.jpg)
I no longer need my SP Retro ErgoDox kit. It is in perfect condition and was only used for a matter of days before I realized I didn't like my ErgoDox lol.
How much do you think it's worth?
Here is a pic:Show Image(http://i.imgur.com/NcccSY6.jpg)
Around 90% of GB price.
Cash price (Market value) check on Ionosphere blue clack and Interstellar Pink Reaper please :p :p :pMoreShow Image(http://i1148.photobucket.com/albums/o580/eth0sz/PostyourClackspic.jpg)Show Image(https://d2lraglvfaoc4l.cloudfront.net/uploads/bro_product/image/41/md_cb9659c716aee28ed8fd6c05f8037b74.jpg)
Cash price (Market value) check on Ionosphere blue clack and Interstellar Pink Reaper please :p :p :pMoreShow Image(http://i1148.photobucket.com/albums/o580/eth0sz/PostyourClackspic.jpg)Show Image(https://d2lraglvfaoc4l.cloudfront.net/uploads/bro_product/image/41/md_cb9659c716aee28ed8fd6c05f8037b74.jpg)
Retail, especially on the Reaper. You should still be able to see the price on CtrlAlt.
Cash price (Market value) check on Ionosphere blue clack and Interstellar Pink Reaper please :p :p :pMoreShow Image(http://i1148.photobucket.com/albums/o580/eth0sz/PostyourClackspic.jpg)Show Image(https://d2lraglvfaoc4l.cloudfront.net/uploads/bro_product/image/41/md_cb9659c716aee28ed8fd6c05f8037b74.jpg)
Retail, especially on the Reaper. You should still be able to see the price on CtrlAlt.
Unfortunately prices are only visible from the Monster Mash sale on. No information on Cosmos.
Cash price (Market value) check on Ionosphere blue clack and Interstellar Pink Reaper please :p :p :pMoreShow Image(http://i1148.photobucket.com/albums/o580/eth0sz/PostyourClackspic.jpg)Show Image(https://d2lraglvfaoc4l.cloudfront.net/uploads/bro_product/image/41/md_cb9659c716aee28ed8fd6c05f8037b74.jpg)
Retail, especially on the Reaper. You should still be able to see the price on CtrlAlt.
Unfortunately prices are only visible from the Monster Mash sale on. No information on Cosmos.
In that case, I believe they were in the $40 range.
Bro has requested his caps be sold at retail. If you're not willing to abide by his wishes, you shouldn't be trying to get his caps in the first place.
Bro has requested his caps be sold at retail. If you're not willing to abide by his wishes, you shouldn't be trying to get his caps in the first place.
I'm actually the buyer here not the seller
Same deal, they shouldn't be selling above retail.
I would like to have a price check on the OTD Red Alert 2.0 + 2.1 keyset. Thanks!
220$ or more if you 've full set at unused conditions.
JD40 pcb?
KUL 87 ES With
Original Box
Blue Top case replacement
Ducky Dyesub Bi Color Grey/Blue Keycaps
Cherry MX Browns
http://imgur.com/JKlmm7B (http://imgur.com/JKlmm7B)
Debating what to ask for this one should nobody bite in my local area Via Want Ads/Craigslist etc.
1800 HAU caps? best/worst case scenarioWhat condition are they in?
1800 HAU caps? best/worst case scenarioWhat condition are they in?
Please.. guys.. give conditions when you're asking for price checks. It helps a lot! :thumb:
best condition possible (NIB) or worst condition possible. Just was curious about the price range for that. Not sure about ones I am getting since they need to be cleaned.Absolute NIB condition around $75-100 depending on who's buying/selling. Shined to hell and back (including the 1.75 shift and everything) maybe $25, although honestly shined over doubleshots are worth nothing in my opinion.
What's a GMK Cyrillic (Base + Winkeyless + HHKB) set worth? No wear or shine.
Also how much would I be expected to pay for an OG Cherry Dyesub set?
What's a GMK Cyrillic (Base + Winkeyless + HHKB) set worth? No wear or shine.
Also how much would I be expected to pay for an OG Cherry Dyesub set?
OG dyesub around 140.
what's the condition like?
Also vintage mx blacks?0.35 per switches
How much for one standard bocahgundul, slightly used but still pretty mint?I don't know about the modern 1 I think 0.30 per switches?
OG dyesub around 140.I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.
what's the condition like?
Agree with photekq. It's more 250$ at good conditions.
OG dyesub around 140.I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.
what's the condition like?
I have always said around $250-350 for used depending on condition, with $350 being very good.
OG dyesub around 140.I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.
what's the condition like?
I have always said around $250-350 for used depending on condition, with $350 being very good.
Agree with photekq. It's more 250$ at good conditions.
Agree with photekq. It's more 250$ at good conditions.OG dyesub around 140.I think $140 is very low. I have personally never seen a dyesub set for that price, except heavily used ones on taobao.
what's the condition like?
I have always said around $250-350 for used depending on condition, with $350 being very good.
Bummer, looks like I'll be waiting a while.
Bummer, looks like I'll be waiting a while.I should have asked.. You do mean ANSI, right? ISO DE sets are around 50-100EUR.
Bummer, looks like I'll be waiting a while.I should have asked.. You do mean ANSI, right? ISO DE sets are around 50-100EUR.
Any ideas on the price of an IBM Model M model # 82G3295 but in an industrial gray shell?
Any ideas on the price of an IBM Model M model # 82G3295 but in an industrial gray shell?
Condition?
Is that its original case or was it swapped?
Bolt Modded?
Trade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
bbv2 is worth more for sure
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
bbv2 is worth more for sure
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
bbv2 is worth more for sure
I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
bbv2 is worth more for sure
I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.
This puzzles me. Stumps are far and away more rare, and equally interesting/appealing (IMO). If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them. Unless it's a super rare V2, I suppose.
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?
bbv2 is worth more for sure
I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.
This puzzles me. Stumps are far and away more rare, and equally interesting/appealing (IMO). If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them. Unless it's a super rare V2, I suppose.
Price for desoldered mx clears?
How much more? I'm trying to gauge on what kind of caps I need to get in order to trade up to a bbv2, because we all know how hard they are to get outrightTrade value of a bro stump vs a bbv2 (on average)? Are they equivalent, or one greater than the other?How about Bro SLS caps?
bbv2 is worth more for sure
I'd say two Stumps to one BBv2. However, as riot mentioned, it really depends on the colorway, and what either party in the trade is after.
This puzzles me. Stumps are far and away more rare, and equally interesting/appealing (IMO). If someone asked me to give them 2 stumps in exchange for 1 BBV2 I would probably stop entertaining offers from them. Unless it's a super rare V2, I suppose.
I think its the same as 420s vs skulls.
People don't value 420s as much as f2 skulls.
Even though the 420s are rarer and probably not mass made like the f2s.
I aint complaining though. I just wish there where more 420s on the market.
cherry G80-5000HAMPO/02 ANSI f keys on the side, used price little shine on caps (no box)
G80-1191HBU Similar condition
Thanks
cherry G80-5000HAMPO/02 ANSI f keys on the side, used price little shine on caps (no box)
G80-1191HBU Similar condition
Thanks
I'm confused about this post, can you clarify?
5000HAMPO is the portuguese ISO version with the windows key, this version with little shine and no box would be 200-300 € range
Oh then the listing I've seen must be incorrect. Pictures appear to be the ansi one but the title says hampo.
Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?
Beige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?
1800 set used about 30-45
nib ansi 70?
I was thinking taobao prices but you are right I'd say add 25-30 extra to each of thoseBeige 1800 set? Some shine and a couple scratches.
NIB ANSI dyesubs?
1800 set used about 30-45
nib ansi 70?
I don't know the prices but that seems very low.
Beige 1800 set? Some shine and a couple scratches.1800 set probably about $40 if the right shift is still in fairly decent condition. Less if that key is also very shiny.
NIB ANSI dyesubs?
I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?
I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)
oval logo, made September 17th 1987.I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?
I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)
If it's only dusty but otherwise in very good condition, that's a fine price. Is it the square logo or the oval logo? If square, it's an even better deal.
oval logo, made September 17th 1987.
I have to order the nut driver for it, but yeah I'll do that.
oval logo, made September 17th 1987.
Crack it open and give it a good cleaning. At that date, there is still a good chance that it has the heavy plate.
$60 shipped was a very good price.
How much do 100 vintage MX blacks go for?35$
Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?
Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?
HHKB keycaps go for around $65-70 IIRC, so I'd say Leopold would be around there, maybe a bit cheaper
Hi everyone, would anyone happen to know how to price the leopold's fc660c stoke keycaps? I have someone interested in buying them and I have no idea what to sell them for?
HHKB keycaps go for around $65-70 IIRC, so I'd say Leopold would be around there, maybe a bit cheaper
Isn't there both a dyesub and lasered version of the fc660c keycaps? I'd guess the lasered ones are not worth nearly as much if it happens to be those.
Will possibly need to liquidate some stuff to fund a trip and want to get some prices.retail.
What are fair prices for these.
I don't believe in hyper inflated clack prices but do realize they are worth more then $50
F2 Blue Topre
Nebulit 420
Weedioactive 420
Replica Hammer 60% case (Silver)
HHKB with silenced MX stems (Holes had to be drilled for stabalizers)
Is Phosphor Glow legit?Yep phosphor glow is 100% legit
I have a slightly beat up model m missing a lot rivets, really do not want to do the job myself.
Yea I'm searching for vintage mx blacksI'm selling some of my stuff.
How much worth for:
- g81-30XX SAD
- wyse terminal (vintage mx blacks)
- OG cherry abs doubleshots classic beige ISO-DE
- facew with acrylic plate and stickered lubed cherry mx clear with 62g 24k gold springs from Sprit, gold wires in the stabs and sip sockets?
bocahgundal is looking for vintage blacks
I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?
I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)
Is Phosphor Glow legit?
lipless silver 60% tex case, in like new condition.
retail is $120, I was thinking around $80-90 shipped?
lipless silver 60% tex case, in like new condition.
retail is $120, I was thinking around $80-90 shipped?
The spacebar, Numpad +, and Numpad Enter, all use wire stabs.I paid $60 (free shipping) for a dusty but intact grey logo Model M, was it a good deal?
I scoured the dozens of thrift shops in my cities but only found rubber domes (and some electric typewriters!)
I paid the same some half a year ago. I didn't even know it was from 1987, since the sticker was missing, but when I opened it up, I saw on the controller that it is from June 1987 (if 2387 means 23rd week of 1987). Does your's have stabiliser wires on plus and endter keys on numpad?
Filco Majestouch 2 OEM keycaps, qwerty ISO layout (see attached picture for the precise layout)
Since I'm an azerty user, I replaced those keycaps two days ago, now I'm thinking of selling them, as I'm probably never gonna use them anyway. Is it worth it trying to sell them, and at what price ?
ansi g80-5000? 7/10 condition?no box right? I would pay max 400 for used ANSI g80-5000
well looks like I am going to purchase a 5kansi g80-5000? 7/10 condition?no box right? I would pay max 400 for used ANSI g80-5000
danq son congrats if you actually find the 5kwell looks like I am going to purchase a 5kansi g80-5000? 7/10 condition?no box right? I would pay max 400 for used ANSI g80-5000
danq son congrats if you actually find the 5kwell looks like I am going to purchase a 5kansi g80-5000? 7/10 condition?no box right? I would pay max 400 for used ANSI g80-5000
So hard to get 5k
Filco Majestouch 2 OEM keycaps, qwerty ISO layout (see attached picture for the precise layout)
Since I'm an azerty user, I replaced those keycaps two days ago, now I'm thinking of selling them, as I'm probably never gonna use them anyway. Is it worth it trying to sell them, and at what price ?
That's ANSI, not ISO.
Probably not worth trying to sell them, stock caps sell for maybe $5. My personal preference is to always hold onto stock caps, in case I ever want to sell the board.
CONGRATS BRO! can you say the seller to take a pic of the serial? pretty please?danq son congrats if you actually find the 5kwell looks like I am going to purchase a 5kansi g80-5000? 7/10 condition?no box right? I would pay max 400 for used ANSI g80-5000
So hard to get 5k
I already have one on hold for me just confirming what a decent price I was thinking 350-450
How much for a Cherry G80-3000HFMDE NIB?Probably 125-150EUR+. Really nice keyboard.Show Image(http://i.imgur.com/pHIMCBf.jpg)Show Image(http://i.imgur.com/2nZw7Wc.jpg)Show Image(http://i.imgur.com/7kcU0CO.jpg)Show Image(http://i.imgur.com/SJ3cRkE.jpg)
That much? Interesting.How much for a Cherry G80-3000HFMDE NIB?Probably 125-150EUR+. Really nice keyboard.Show Image(http://i.imgur.com/pHIMCBf.jpg)Show Image(http://i.imgur.com/2nZw7Wc.jpg)Show Image(http://i.imgur.com/7kcU0CO.jpg)Show Image(http://i.imgur.com/SJ3cRkE.jpg)
That much? Interesting.Yes, as the winkeys are very rare and it's NIB. Also, the blues may be worth something to some.
Thanks sir.
An assembled duck viper with clears and some leds.400$
JTK Stormtrooper and JTK WoBGB price
Some cherry stuff I am not sure what is worth:ask photek ;)
NIB G80-3314 HAU
like new G80-3234 HQU - caps w/no shine, perfect case, box + manual.
ask photek ;):cool:
I'd guess $100 for the 3314 due to the weird ass layout.
The HQU... If it is truly new condition, absolutely spotless, no texture loss (this is not the same as not shiny) then I would say $200+
ask photek ;):cool:
How much does LZ-RE keybord worth on market these days? Good conditionkit is 700
How much does LZ-RE keybord worth on market these days? Good conditionkit is 700
assembled should be lower
How much does LZ-RE keybord worth on market these days? Good conditionkit is 700
assembled should be lower
ROFL
How much does this Cherry MX5000 worth?u got pm
How much does this Cherry MX5000 worth?
How much does this Cherry MX5000 worth?u got pm
I've been searching for 1 yoHow much does this Cherry MX5000 worth?u got pm
:))
How much does a Bro Reaper V2 Black and green go for? Has the official bro card.
Hey guys, I have an Apple Extended Keyboard (M0115) with Alps SKCM Orange switches. It's includes the original coiled ADB cable. I'm looking for a ballpark figure to list it at. I appreciate any feedback, thanks!Show Image(https://i.imgur.com/pFbqLYi.jpg)Show Image(https://i.imgur.com/8qoiayF.jpg)Show Image(https://i.imgur.com/WHHn051.jpg)Show Image(https://i.imgur.com/YbhMk6e.jpg)
Hey guys, I have an Apple Extended Keyboard (M0115) with Alps SKCM Orange switches. It's includes the original coiled ADB cable. I'm looking for a ballpark figure to list it at. I appreciate any feedback, thanks!Show Image(https://i.imgur.com/pFbqLYi.jpg)Show Image(https://i.imgur.com/8qoiayF.jpg)Show Image(https://i.imgur.com/WHHn051.jpg)Show Image(https://i.imgur.com/YbhMk6e.jpg)
that's in really nice condition! Has it been retrobrighted? Do you also have the box by chance?
Some googling leads me to believe that these might go for about $80 in good condition. Does that sounds about right?
I would start with more and then work my way down, because it's a really, really nice board.
How much would a White Walker Reaper v1 go for?
How much for a Kenesis Classic w/ vintage blues
Thank but i wont find one at costHow much would a White Walker Reaper v1 go for?
If you are trying to buy it, I say cost but most people aren't looking to sell.
Thank but i wont find one at costHow much would a White Walker Reaper v1 go for?
If you are trying to buy it, I say cost but most people aren't looking to sell.
How much for a Kenesis Classic w/ vintage blues
I thought these only came with browns...maybe it's been modded. What's the condition like? mint condition should get you somewhere between 110-130.
How much for a Kenesis Classic w/ vintage blues
I thought these only came with browns...maybe it's been modded. What's the condition like? mint condition should get you somewhere between 110-130.
Really? Thought it might be a bit more, don't think its modded, its second hand but looks pretty good condition
How much for a Kenesis Classic w/ vintage blues
I thought these only came with browns...maybe it's been modded. What's the condition like? mint condition should get you somewhere between 110-130.
Really? Thought it might be a bit more, don't think its modded, its second hand but looks pretty good condition
Classics sell for a little less, the last few that have been sold in good shape didn't go past $130. I had an Advantage (USB w/macro capability) and got $180 for it.
Selling these too, GMK purple modifier set from: https://geekhack.org/index.php?topic=41017.0Show Image(http://i.imgur.com/lGUOi2o.jpg)
Any idea on how to price?
GB pricePeople shouldn't be allowed to answer price checks with "GB price" or "retail". It's never accurate. It's just confusing and false. We all know full well that the GMK purple mods usually sell for more than GB price.
GB pricePeople shouldn't be allowed to answer price checks with "GB price" or "retail". It's never accurate. It's just confusing and false. We all know full well that the GMK purple mods usually sell for more than GB price.
Try $75 dadgh.
I would start with more and then work my way down, because it's a really, really nice board.
Start at $100 at least, it's worth it.
GB pricePeople shouldn't be allowed to answer price checks with "GB price" or "retail". It's never accurate. It's just confusing and false. We all know full well that the GMK purple mods usually sell for more than GB price.
Try $75 dadgh.
The set they are selling is different than the set from the group buy.GB pricePeople shouldn't be allowed to answer price checks with "GB price" or "retail". It's never accurate. It's just confusing and false. We all know full well that the GMK purple mods usually sell for more than GB price.
Try $75 dadgh.
These mods are easily available for $49 from Originative (https://www.originativeco.com/products/purple-modifiers).
These mods are easily available for $49 from Originative (https://www.originativeco.com/products/purple-modifiers).25 vs 35 keys.
Hello GH!You can also possibly reuse the stabilizers.
I have a few WYSE keyboards from the 80's that I'm harvesting for it's beautiful vintage mx blacks. I have one compact 10keyless-like keyboard (http://i.imgur.com/2EXFfDv.jpg) and one full sized keyboard (http://i.imgur.com/77NsvNX.jpg). I feel somewhat guilty throwing away the pcb and the metal frame of this vintage keyboard, is there any interest in the PCB, keycaps, or case? I can provide pictures if people express interest.
If most people throw away the rest of the pieces after harvesting the switches, please let me know so I can do so without a guilty conscience :)
Thanks!
Does that thing not have a counterpart? All for just one hand?It's all just for one hand. Might make a wicked game pad tho.
What's the going rate per switch on used Cherry Clears? I'd imagine that they're less valuable with so much Zealios in the world.You can buy new MX clears for ~$0.50/switch @ 100 switches, so somewhere less than that.
You can buy new MX clears for ~$0.50/switch @ 100 switches, so somewhere less than that.Honestly, I think used clears (so long as they're used, old clears and not used, new clears) should be worth around the same. I say this because modern, new clears are among the worst switches I have ever used, while old, used ones are brilliant. When it comes to switches I don't think used is a bad thing.
You can buy new MX clears for ~$0.50/switch @ 100 switches, so somewhere less than that.Honestly, I think used clears (so long as they're used, old clears and not used, new clears) should be worth around the same. I say this because modern, new clears are among the worst switches I have ever used, while old, used ones are brilliant. When it comes to switches I don't think used is a bad thing.
Around roughly when are you considering old vs new? I bought these in mid/late-2014 (maybe) when MX clears were still extraordinarily hard to come by.Late 1990s heavily used and anything past 2010 I'd guess.
Around roughly when are you considering old vs new? I bought these in mid/late-2014 (maybe) when MX clears were still extraordinarily hard to come by.Late 1990s heavily used and anything past 2010 I'd guess.
what would people pay for novatouch sliders?
so i may be getting my hands on this to sell.... if everything works... what do you all think?Bump?
(Attachment Link)
how much is evga titan x worth?
have never overclocked, everything works perfectly
how much is evga titan x worth?
have never overclocked, everything works perfectly
Retail I think is around $1000 but I wouldn't expect more than $500-600 now, since it loses to the 980Ti in pretty much every category and you can pick the 980Ti up for around $600ish.
how much is a used good condition 103ub 55g realforce worth?
how much is a used good condition 103ub 55g realforce worth?
$300+ I would imagine, they never come up though
Wow, thought they went for more since variable go for almost $250 and 55g seems pretty rare.how much is a used good condition 103ub 55g realforce worth?
$300+ I would imagine, they never come up though
I would say closer to $200 max there have been a couple sold recently around that.
Also depends on how used it is.
Wow, thought they went for more since variable go for almost $250 and 55g seems pretty rare.how much is a used good condition 103ub 55g realforce worth?
$300+ I would imagine, they never come up though
I would say closer to $200 max there have been a couple sold recently around that.
Also depends on how used it is.
what's it worth?
Wow, thought they went for more since variable go for almost $250 and 55g seems pretty rare.how much is a used good condition 103ub 55g realforce worth?
$300+ I would imagine, they never come up though
I would say closer to $200 max there have been a couple sold recently around that.
Also depends on how used it is.
Most second hand full size topre boards I've seen for sale are sold for less than $200, some even closer to $150.
Brand new realforce boards are less than $250 from EK, unless they are anniversary editions or silenced versions.
But like anything else if someone really wants it they might pay more since it is not a common board.
Personally I've almost always lost money selling any board, especially topre.
How much would a Mitsubishi Key Tronic; Model #: E03370057 go for. I haven't opened the shell, but it feels like a clickety keyboard. It has a Din5 cord.
Pop a keycap off with a keycap puller (or a paper clip bent so it can grip a keycap in the corners) and post a picture of the switch. I couldn't find much info on this keyboard from searching, but you can get an idea of what it's worth based on what switches it has. Also, if there is a date printed anywhere, that would be good to know.
Complete set of Topre green blanks?I heard they pay you in PM's. 200 or more I guessShow Image(http://i.imgur.com/7RY0mgx.jpg)
Complete set of Topre green blanks?I heard they pay you in PM's. 200 or more I guessShow Image(http://i.imgur.com/7RY0mgx.jpg)
Complete set of Topre green blanks?I heard they pay you in PM's. 200 or more I guessShow Image(http://i.imgur.com/7RY0mgx.jpg)
yeah it's hard to find any public sales for them.
Anyone have original pricing on Krap Baby Dragons?
Anyone have original pricing on Krap Baby Dragons?
$48 Shipped from Malaysia is what I've read.
Source: https://www.reddit.com/r/mechmarket/comments/4fgg54/ustxh_paypal_w_krap_baby_dragon/d28qh1e
I'm looking to sell my barely used SA DangerZone with Arrow Pack. I have not yet seen anyone selling this set so I don't know how much it's worth. Any clues?
Not so much a literal pricecheck, but I wasn't sure where else to ask this - I have a Reaper Classic that I want to trade for a BBv2. Is there a chance that anyone would take this? While the Reaper is a Bro, I am not sure what "tier" it sits on in comparison to the BBv2.Depends what bbv2 you want, but I'd say that you can trade it for 80+% of the bros' out there!
Depends what bbv2 you want, but I'd say that you can trade it for 80+% of the bros' out there!Nice, good to know. I have no specific colorway that I'm looking for so I'm hoping there will be someone out there that bites! :D
Anybody know how much a Fugu, if someone would be selling it, be worth?I'd say $35. Retail was $25 and then you can add on shipping.
Preferably a non-toothy dark/black one with bright tips.
Anybody know how much a Fugu, if someone would be selling it, be worth?I'd say $35. Retail was $25 and then you can add on shipping.
Preferably a non-toothy dark/black one with bright tips.
Sent from my Mind using Telepathy
Anybody know how much a Fugu, if someone would be selling it, be worth?I'd say $35. Retail was $25 and then you can add on shipping.
Preferably a non-toothy dark/black one with bright tips.
Sent from my Mind using Telepathy
Do you mean this one? (http://"https://www.reddit.com/r/mechmarket/comments/4i0kx9/uswahfugu_jukebox_troubled_minds_clackbar_goombas/")
Is there a price difference between toothy and non-toothy? Do the colours matter for the price?
Do you mean this one? (http://"https://www.reddit.com/r/mechmarket/comments/4i0kx9/uswahfugu_jukebox_troubled_minds_clackbar_goombas/")
Is there a price difference between toothy and non-toothy? Do the colours matter for the price?
Complete in Box HHKB Pro 2 (Manufactured Jan 2016 if it matters)
Have two of these and the other one has an extended warranty...second one isn't seeing much use, feel guilty letting it sit in a box.
Complete in Box HHKB Pro 2 (Manufactured Jan 2016 if it matters)
Have two of these and the other one has an extended warranty...second one isn't seeing much use, feel guilty letting it sit in a box.
$200 probably
Complete in Box HHKB Pro 2 (Manufactured Jan 2016 if it matters)
Have two of these and the other one has an extended warranty...second one isn't seeing much use, feel guilty letting it sit in a box.
$200 probably
it was opened and used (although for a short time)..I'd say $175-180, they're $206 brand new from EK.
I pay $10 for case,
For an RGB, brass case, custom keycap, $171.
I will add pictures after I assemble it. Suggestions for how much I could reasonably sell these for assuming even $5 profit makes me happy?
I'm new to customizing keyboards but got interested after seeing Bro Caps on Instagram. I was wondering how much the gamer/moba sets excluding the artisan keycap would cost. I'm really digging these.
Not exactly a price check, but I'm not sure where else to ask.
How easily are GMK sets resold/traded? I'm debating grabbing Sky Dolch, but that's a lot of money to be out if I decide it's not for me.
How much is a WYSE 50/350 Terminal Keyboard's key set??
I'm new to customizing keyboards but got interested after seeing Bro Caps on Instagram. I was wondering how much the gamer/moba sets excluding the artisan keycap would cost. I'm really digging these.
This will run you $50-$80, depending on whether or not it includes the arrow set as well.
I'm new to customizing keyboards but got interested after seeing Bro Caps on Instagram. I was wondering how much the gamer/moba sets excluding the artisan keycap would cost. I'm really digging these.
This will run you $50-$80, depending on whether or not it includes the arrow set as well.
Won't the arrow set also fit the same as WASD though? Sorry, I'm really new to this. Just looks logical in that sense.
How much is a WYSE 50/350 Terminal Keyboard's key set??
Anyone?
assuming you have a non-standard bottom row / shift keys I'd say 15-25. Seems hard to sell them in my experience.
Not exactly a price check, but I'm not sure where else to ask.They're very easy to resell on mechmarket. Also you should note that Originative mentioned they're down to 5 sets and they're unsure if they're going to restock. They're also selling the accent set now. This was the post they mentioned it in. https://www.reddit.com/r/MechanicalKeyboards/comments/4i5zrx/buying_sky_dolch_accent_kit/
How easily are GMK sets resold/traded? I'm debating grabbing Sky Dolch, but that's a lot of money to be out if I decide it's not for me.
Not exactly a price check, but I'm not sure where else to ask.They're very easy to resell on mechmarket. Also you should note that Originative mentioned they're down to 5 sets and they're unsure if they're going to restock. They're also selling the accent set now. This was the post they mentioned it in. https://www.reddit.com/r/MechanicalKeyboards/comments/4i5zrx/buying_sky_dolch_accent_kit/
How easily are GMK sets resold/traded? I'm debating grabbing Sky Dolch, but that's a lot of money to be out if I decide it's not for me.
How much is a WYSE 50/350 Terminal Keyboard's key set??
Anyone?
assuming you have a non-standard bottom row / shift keys I'd say 15-25. Seems hard to sell them in my experience.
so, I am really thinking hard about the HHKB BT and am thinking of selling my one and a half year used HHKB Pro 2. Black. While the product is aged, it's not exactly used for that long because I do rotate keyboards quite often. So, how much is a used HHKB these days?They are a little over $200 brand new in the USA but being international you'll have extra shipping costs factored in and possible customs charges to consider when reselling.
ugh! yeah, shipping cost will deter people. I am probably **** out of luck. Lemme look for some local interest. Otherwise, perhaps some extra keys will sweeten the deal. Thanks Spam!so, I am really thinking hard about the HHKB BT and am thinking of selling my one and a half year used HHKB Pro 2. Black. While the product is aged, it's not exactly used for that long because I do rotate keyboards quite often. So, how much is a used HHKB these days?They are a little over $200 brand new in the USA but being international you'll have extra shipping costs factored in and possible customs charges to consider when reselling.
how much brough! yeah, shipping cost will deter people. I am probably **** out of luck. Lemme look for some local interest. Otherwise, perhaps some extra keys will sweeten the deal. Thanks Spam!so, I am really thinking hard about the HHKB BT and am thinking of selling my one and a half year used HHKB Pro 2. Black. While the product is aged, it's not exactly used for that long because I do rotate keyboards quite often. So, how much is a used HHKB these days?They are a little over $200 brand new in the USA but being international you'll have extra shipping costs factored in and possible customs charges to consider when reselling.
Yolo Yellow BBV2?
Just curious what the market value for these Bros are:
Interstellar Blue BBv2
Interstellar Purple BBv2
Stardust BBv2
Andromeda Skies BBv2
Gonna be here a lot. All help is greatly appreciated. - Roger
Just curious what the market value for these Bros are:
Interstellar Blue BBv2
Interstellar Purple BBv2
Stardust BBv2
Andromeda Skies BBv2
Gonna be here a lot. All help is greatly appreciated. - Roger
Just curious what the market value for these Bros are:
Interstellar Blue BBv2
Interstellar Purple BBv2
Stardust BBv2
Andromeda Skies BBv2
Gonna be here a lot. All help is greatly appreciated. - Roger
Retail price for these ranges from $25-$40.
Market price ranges from $100-$300.
Just curious what the market value for these Bros are:
Interstellar Blue BBv2
Interstellar Purple BBv2
Stardust BBv2
Andromeda Skies BBv2
Gonna be here a lot. All help is greatly appreciated. - Roger
Retail price for these ranges from $25-$40.
Market price ranges from $100-$300.
I'm gonna assume the ones I added on are in about the same range.
Icestorm BBv2
Celestial Blue BBv2
Cosmic Dusk BBv2
Andromeda Skies BBv2
Star Cluster BBv2
Nebulus BBv2
Interstellar Green BBv2
Interstellar Blue BBv2
Interstellar Purple BBv2
Interstellar Pink BBv2
Astral BBv2
How much are Snackeys and Killwalas going for right now? Thank you!
How much are Snackeys and Killwalas going for right now? Thank you!
We talking Ericaps Snackeys or something else?
How much are Snackeys and Killwalas going for right now? Thank you!
We talking Ericaps Snackeys or something else?
I'm assuming he means KK Snackeys
Ericaps were cakeys, for what it's worth.How much are Snackeys and Killwalas going for right now? Thank you!
We talking Ericaps Snackeys or something else?
Ericaps were cakeys, for what it's worth.How much are Snackeys and Killwalas going for right now? Thank you!
We talking Ericaps Snackeys or something else?
Ericaps were cakeys, for what it's worth.How much are Snackeys and Killwalas going for right now? Thank you!
We talking Ericaps Snackeys or something else?
Oooh my b
How much are Snackeys and Killwalas going for right now? Thank you!Snackeys seems to sell fast for $50 on mm. So around that price to start.
Are these Alps sphericals worth anything?
Are these Alps sphericals worth anything?
They're wicked and beautiful. Too bad there is nowhere near a modern set in there.
That'd be a really fun teensy project.
how much for all sliders for TKL novatouch?Considering the board is rendered useless after, I would say whatever price the board sells for.
how much for all sliders for TKL novatouch?Considering the board is rendered useless after, I would say whatever price the board sells for.
I'm not saying they're worthless, but I doubt people are in line waiting for someone to sell them.how much for all sliders for TKL novatouch?Considering the board is rendered useless after, I would say whatever price the board sells for.
aren't the domes worth something?
edit: I thought the Majestouch 2 had a Ninja version. Silly me.It does :)
edit: I thought the Majestouch 2 had a Ninja version. Silly me.It does :)
Full set of GMK Hyperfuse?
Full set of GMK Hyperfuse?
Recent trends show GMK hyperfuse selling for 230-270 shipped on Reddit.
Thanks a bunch!Full set of GMK Hyperfuse?
Recent trends show GMK hyperfuse selling for 230-270 shipped on Reddit.
how much would i have to pay someone to clean my realforce 87 that i spilled coffee on? or does anyone have a guide for that hahaYes there's a guide. Send me pm so I don't forget. At work now.
Silver Duck Viper
62g ergo clear on gateron housings.
Issues:
1. Chattering
2. Anodizing chirping off underneath.
How much is a GMK Charred Orange keyset (from Originative) worth?
Dolch 1800 keyboard in good condition with Vintage Blues, all keycaps included, and PS/2?
Rough idea for GMY Cyrillic set (red) with WKL kit?
Going price for BBv2 Patriot and Blob please? Both Topre.
Rough idea for GMY Cyrillic set (red) with WKL kit?
I assume you meant GMK. I think they should go for $180 ~ $190 brand new. :)
I have two AT102W keyboards, one beige one black. Both are PS2 and in working order.
Are they worth the money in selling or should i just re-home/dump them?
TIA
H
Thanks for the advice, they both have ALPS swicthes as I've been askerd about them.
So would you say Ł30 each is about the money or too steep?
He's selling not buying. :DThanks for the advice, they both have ALPS swicthes as I've been askerd about them.
So would you say Ł30 each is about the money or too steep?
As always, the more patient you can be, the better deal you can get. Contact Chyros if you are in the UK, he sometimes has access to really cheap gear.
But if you can get the black one at that price, it's probably not too bad.
How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?Wrong picture?
Yup. Thanks, I fixed it.How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?Wrong picture?
How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
Isn't that just an 1800 layout though?
Do you know how much a unicorn vomit DSA set would cost? It is 99 keys in total. And can't OG Cherry sets be found like this? People found some for their CPSQ'sHow much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
Isn't that just an 1800 layout though?
Maybe? I'm not that well-versed. But if you mean this one, then they're slightly different:Show Image(http://cherryamericas.com/wp-content/uploads/2014/12/G81-1800_2_Ang-150-dpi_001-1100x728.jpg)
Do you know how much a unicorn vomit DSA set would cost? It is 99 keys in total. And can't OG Cherry sets be found like this? People found some for their CPSQ'sHow much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
Thanks! Sadly Granite won't be running anytime soon due to the huge backlog at SP. I will look into that, but as a plan B, do you know what set that those OG Cherries came from in the picture that I posted?How much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
Isn't that just an 1800 layout though?
Maybe? I'm not that well-versed. But if you mean this one, then they're slightly different:Show Image(http://cherryamericas.com/wp-content/uploads/2014/12/G81-1800_2_Ang-150-dpi_001-1100x728.jpg)
Yeah, it's the layout that like the RS96 and CPSQ use which is a modified 1800 layout.Show Image(http://i.imgur.com/RUzeykL.jpg)Do you know how much a unicorn vomit DSA set would cost? It is 99 keys in total. And can't OG Cherry sets be found like this? People found some for their CPSQ'sHow much would some OG Cherry doubleshots or Signature Plastics DSA keycaps for this layout cost?
Looks like a base set, modifiers, and a numpad, but then a few weird ones - the Fn and RCTRL are wide, and the RSHIFT and numpad 0 are small. Your best bet would be DSA blanks, and you'll need the standard base set, the standard modifier set, the numpad set, and then grab an extra 1u key for the numpad 0, two 1.5u keys for the Fn and CTRL, and a 1.75u key for RSHIFT. Should run about a C-note with shipping.
I think Granite would cover it just fine, might just need some extra modifiers.
Thanks! Sadly Granite won't be running anytime soon due to the huge backlog at SP. I will look into that, but as a plan B, do you know what set that those OG Cherries came from in the picture that I posted?
Model Ms usually sell for about $125 after being bolt modded, in fact I just sold mine yesterday. It isnt a difficult process, just time consuming.
Wow, did you pay 115 each for those boards? if so, you massively overpaid. Yeah, mine was 125+ shipping.Model Ms usually sell for about $125 after being bolt modded, in fact I just sold mine yesterday. It isnt a difficult process, just time consuming.
Its just a matter if my time is worth the difference in value in the end.
Im glad you sold it. for 125 + shipping?
I can probably do them both in 2-3 hours. But if it only increases the value by 10 bucks, I wont do it.
Wow, did you pay 115 each for those boards? if so, you massively overpaid. Yeah, mine was 125+ shipping.Model Ms usually sell for about $125 after being bolt modded, in fact I just sold mine yesterday. It isnt a difficult process, just time consuming.
Its just a matter if my time is worth the difference in value in the end.
Im glad you sold it. for 125 + shipping?
I can probably do them both in 2-3 hours. But if it only increases the value by 10 bucks, I wont do it.
Yeah, you can get 40-70$ for a working, unmodded model m, you were right on the money! Definitely do the mod, its worth it.
360c with 65g lubed vintage blacks. I know prices have been all over the place, just looking for what is somewhat current.
Not 400 ^
I've got a really clean Lexmark Model M that I'm going to bolt-mod (already did my 2 IBMs). Do they command the price as an IBM? I'm not sure how important the top label is.
Pirce check on a couple of things
-456GT in black
-OG cherry dyesubs
-HASRO dyesubs
Pirce check on a couple of things456 is probably around $850-1000 like dgneo says, depending on whether it's assembled, which switches, etc.
-456GT in black
-OG cherry dyesubs
-HASRO dyesubs
And don't forget the Nixies! That is one fine board.Leeku v3 pcb + nixies + peacock case ?Show Image(https://i.imgur.com/pYVqZIC.jpg)
Jesus That's nice. I know WKL case is pretty hard to get.
Hi guys,
I have some new in box Key Tronic Flex Pro keyboards and was wondering if anyone know what the prices of them are?
I also found some RT8251C+ keyboards and was wondering how much those cost too?
Thank you
Hi guys,
I have some new in box Key Tronic Flex Pro keyboards and was wondering if anyone know what the prices of them are?
I also found some RT8251C+ keyboards and was wondering how much those cost too?
Thank you
Photos would be helpful. Are the NMBs new also?
Does "some" mean 3 or 3 dozen? Flooding a very small niche market will depress prices.
How about a set of mint condition alps compatible doubleshots :Whatever theyre worth I want them!
https://deskthority.net/wiki/ICL_One_Per_DeskShow Image(http://i.imgur.com/9imf0ti.jpg)
How much are recent non-V2 Bro Caps worth? 3-color "hallowed" grumpkin, 3 color "reaper classics" like the green "lifted", the Jolly Roger caps, etc?Retail for bro caps (come on now...)
How much for a blank pink topre realforce set?
How much are recent non-V2 Bro Caps worth? 3-color "hallowed" grumpkin, 3 color "reaper classics" like the green "lifted", the Jolly Roger caps, etc?
How much for a blank pink topre realforce set?
I hope to hell the pic scales properly, if not, I'll edit and kill the pic.So which one are you price checking? I'd say max retail for both
HHKB Pro2, White Frame, Black Blank Keys. Both keyboards are less than a week old. (Top keyboard in pic). I see a lot more black frame / white keys than the other way around, so I thought I would see if this is interesting.
I bought the white keyboard first, then decided I wanted a black frame. Went to elitekeyboards and bought the black one with blank keys and swapped keys.Show Image(http://i.imgur.com/zq9OLj9.jpg)
I hope to hell the pic scales properly, if not, I'll edit and kill the pic.So which one are you price checking? I'd say max retail for both
HHKB Pro2, White Frame, Black Blank Keys. Both keyboards are less than a week old. (Top keyboard in pic). I see a lot more black frame / white keys than the other way around, so I thought I would see if this is interesting.
I bought the white keyboard first, then decided I wanted a black frame. Went to elitekeyboards and bought the black one with blank keys and swapped keys.Show Image(http://i.imgur.com/zq9OLj9.jpg)
Around 200 is what I would've paid max :)I hope to hell the pic scales properly, if not, I'll edit and kill the pic.So which one are you price checking? I'd say max retail for both
HHKB Pro2, White Frame, Black Blank Keys. Both keyboards are less than a week old. (Top keyboard in pic). I see a lot more black frame / white keys than the other way around, so I thought I would see if this is interesting.
I bought the white keyboard first, then decided I wanted a black frame. Went to elitekeyboards and bought the black one with blank keys and swapped keys.Show Image(http://i.imgur.com/zq9OLj9.jpg)
Top. I'm lame and cant use blanks.
I'd be happy with that. Close to what I paid for it, I would eat local sales tax, shipping, and paypal fees (not sure what those are since I don't do much). Thanks for the info, I'll list it next week on reddit.Around 200 is what I would've paid max :)I hope to hell the pic scales properly, if not, I'll edit and kill the pic.So which one are you price checking? I'd say max retail for both
HHKB Pro2, White Frame, Black Blank Keys. Both keyboards are less than a week old. (Top keyboard in pic). I see a lot more black frame / white keys than the other way around, so I thought I would see if this is interesting.
I bought the white keyboard first, then decided I wanted a black frame. Went to elitekeyboards and bought the black one with blank keys and swapped keys.Show Image(http://i.imgur.com/zq9OLj9.jpg)
Top. I'm lame and cant use blanks.
kmac happy titan with mx greysYou just did a build log on it... I'd say 700 is a rough estimate
How about a set of mint condition alps compatible doubleshots :Whatever theyre worth I want them!
https://deskthority.net/wiki/ICL_One_Per_DeskShow Image(http://i.imgur.com/9imf0ti.jpg)
need some price checks, been out of this keyboard hobby for quite some time, looking to sell some of my stuff:Octagon around 500 I thinks
1:
duck octagon, gateron black switches, i built this one myself. the stabilisers are also trimmed which makes them feel the same as those wire stabilisersShow Image(https://i.imgur.com/2AiRNlUl.jpg)
2:
a full set of GMK triumph adler keycaps, barely used
3:
a full set of GMK hyperfuse keycaps, used but clean
4:
HHKB pro 2, used, flawless condition (it has the US layout)
5:
this one is a poker 2 i bought from a user on here quite some time ago, the switches are lubed vintage MX black switches (taken from A vintage wyse) with red pads/stickers(?) between the switches and the plate, a set of PBT keycaps, the modifier keys of which have been dyed black by the previous owner. it also has a black aluminium TEX caseShow Image(http://i.imgur.com/HXIzkht.jpg)
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
1. Retail was $125
2. Maybe 1 BBv2
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
How much for these brand new lasered PBT cherry capsShow Image(http://i.imgur.com/duDodKg.jpg)
How much for these brand new lasered PBT cherry capsShow Image(http://i.imgur.com/duDodKg.jpg)
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
Most likely won't get a BBV2 for it. Seen several people trying to trade sets for higher end artisans with no luck.
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
Most likely won't get a BBV2 for it. Seen several people trying to trade sets for higher end artisans with no luck.
Thanks. Doesn't Jolly Roger count as high end artisan yet?
BroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
Most likely won't get a BBV2 for it. Seen several people trying to trade sets for higher end artisans with no luck.
Thanks. Doesn't Jolly Roger count as high end artisan yet?
And how about Stump II?
And how about Stump II?
High end meaning high demand I think. They're all really good quality. But people just want dem botsBroCaps MX Gamer Set - THC2 Jolly MOBA (7 keys + Jolly Roger Artisan)
1. How much would it sell for?
2. How many BBv2 caps can be traded for this set?
I'm sad to sell those, but I've decided to stay with HHKB-only setup.
Most likely won't get a BBV2 for it. Seen several people trying to trade sets for higher end artisans with no luck.
Thanks. Doesn't Jolly Roger count as high end artisan yet?
OK. Thanks for the info ;)
I'm not like "all in" for BBv2. I like how my green Stump looks on white HHKB. Just curious what it is really worth.
aftermarket price for topre Interstellar Purple reaperYour dog died?
and save me the complaining pls.
aftermarket price for topre Interstellar Purple reaperYour dog died?
and save me the complaining pls.
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
aftermarket price for topre Interstellar Purple reaperLike $150-200 I'd bet 200 it would sell instantly though
and save me the complaining pls.
aftermarket price for topre Interstellar Purple reaperLike $150-200 I'd bet 200 it would sell instantly though
and save me the complaining pls.
Or retail which ever is fine.
Fairly sure it will sell instantly at that too, but the fellow did ask for "Real" price so like $200 and bam soldaftermarket price for topre Interstellar Purple reaperLike $150-200 I'd bet 200 it would sell instantly though
and save me the complaining pls.
Or retail which ever is fine.
Selling at 200 instantly? I'd just mark it up to 300 then see if they bite.
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
zero
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
zero
Helpful
I'd just mark it up to 300 then see if they bite.Go for a cheeky 5 hunny, I'd say.
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
zero
Helpful
Literally just said 300 up there twit.
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
aftermarket price for topre Interstellar Purple reaper
and save me the complaining pls.
zero
Helpful
Literally just said 300 up there twit.
k. Don't see why you had to insult me but your initial post was not helpful until fire brand said something.
im gonna sell it for 250 and risk getting banned from future sales.
hope bro doesn't hate me too much tho. we've been homies for a minute now.
im gonna sell it for 250 and risk getting banned from future sales.
hope bro doesn't hate me too much tho. we've been homies for a minute now.
sigh I thought you were better than that
Guide to making the most money off keyboard stuff
1. Post you listing on /r/Mechmarket, it will result on maximum exposure
2. Ask for the cheekiest amount you can think of. Low ballers will then try to give you like 50-100 less than asking price
3. ? ? ? ? ? ?
4. Profit
im gonna sell it for 250 and risk getting banned from future sales.
hope bro doesn't hate me too much tho. we've been homies for a minute now.
sigh I thought you were better than that
Guide to making the most money off keyboard stuff
1. Post you listing on /r/Mechmarket, it will result on maximum exposure
2. Ask for the cheekiest amount you can think of. Low ballers will then try to give you like 50-100 less than asking price
3. ? ? ? ? ? ?
4. Profit
stop paying attention when you used the word cheekiest
1991 IBM SSK with one-piece keycaps? Board works great, cleaning it now. A few rivets missing at the bottom edge but doesn't impact performance noticeably.
I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?(http://puu.sh/pR4aS/28e1fa29fd.jpg)
I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?Show Image(http://puu.sh/pR4aS/28e1fa29fd.jpg)
Good luck selling 81 for $8-10. You might sell 5 for that price.
Whats the value of these granite keys plus space bar?
(Attachment Link)
I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?Show Image(http://puu.sh/pR4aS/28e1fa29fd.jpg)
Good luck selling 81 for $8-10. You might sell 5 for that price.
Hence the price check. I don't know what the fair price is. Obv. I'd like to know the individual value vs bulk.
Sent from my SM-N910T using Tapatalk
I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?Show Image(http://puu.sh/pR4aS/28e1fa29fd.jpg)
Good luck selling 81 for $8-10. You might sell 5 for that price.
Hence the price check. I don't know what the fair price is. Obv. I'd like to know the individual value vs bulk.
Sent from my SM-N910T using Tapatalk
I think supply/demand dictate price. I see them sold no where else. If people don't buy my prices, I can always lower them till they meet demand.I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?Show Image(http://puu.sh/pR4aS/28e1fa29fd.jpg)
Good luck selling 81 for $8-10. You might sell 5 for that price.
Hence the price check. I don't know what the fair price is. Obv. I'd like to know the individual value vs bulk.
Sent from my SM-N910T using Tapatalk
But you're thinking there would be 100% inflation over 3 months?
What would a Miami V1 TKL set be worth? Includes all caps from original set including both Hapsters and both GH keys. Slight shine on the right side of the teal spacebar, but otherwise very good shape.
The MX clears should be really nice.Show Image(http://i.imgur.com/bS0Dg9n.jpg)
Picked this up. It's made by GMK (I'm guessing early 2000s), has doubleshots for all the normal black alphas, and pad printing for all the extra cool stuff. The top left and right keypads with weird buttons are all pad printed. Loads of row 1 windowed keys as well.
Not sure whether to salvage for parts, including the MX clears and keycaps (split/together?), or to sell as a whole.
Album: http://imgur.com/a/eRxbJ
The MX clears should be really nice.Show Image(http://i.imgur.com/bS0Dg9n.jpg)
Picked this up. It's made by GMK (I'm guessing early 2000s), has doubleshots for all the normal black alphas, and pad printing for all the extra cool stuff. The top left and right keypads with weird buttons are all pad printed. Loads of row 1 windowed keys as well.
Not sure whether to salvage for parts, including the MX clears and keycaps (split/together?), or to sell as a whole.
Album: http://imgur.com/a/eRxbJ
It should have some screw in stabilizers.
And those windowed F key are somewhat of a desirable item.
These caps aren't quite as hot as they once would have been due to recent group buys.
Show Image(http://i.imgur.com/bS0Dg9n.jpg)
Picked this up. It's made by GMK (I'm guessing early 2000s), has doubleshots for all the normal black alphas, and pad printing for all the extra cool stuff. The top left and right keypads with weird buttons are all pad printed. Loads of row 1 windowed keys as well.
Not sure whether to salvage for parts, including the MX clears and keycaps (split/together?), or to sell as a whole.
Album: http://imgur.com/a/eRxbJ
Show Image(http://i.imgur.com/bS0Dg9n.jpg)
Picked this up. It's made by GMK (I'm guessing early 2000s), has doubleshots for all the normal black alphas, and pad printing for all the extra cool stuff. The top left and right keypads with weird buttons are all pad printed. Loads of row 1 windowed keys as well.
Not sure whether to salvage for parts, including the MX clears and keycaps (split/together?), or to sell as a whole.
Album: http://imgur.com/a/eRxbJ
Did get get it off of eBay by chance? I was looking at getting a WEY keyboard but it was in Austria which would've cost quite a bit to ship to me, it was ISO, and also QWERTZ so I passed. I still really like all the windowed keycaps though!
I have 81x sadster keys that have never been used. Whats a fair price per key? The bit of searching I do shows that they are somewhat sought after, and the last one I can find for sale that lists a price is $5, but that was 3 months ago. Is $8-$10 fair?
Are these worth anything?
(http://i2.photobucket.com/albums/y42/kikim85/04cf327f_zps1cd8fe7b.jpg) (http://s2.photobucket.com/user/kikim85/media/04cf327f_zps1cd8fe7b.jpg.html)
What would you pay for a %40 rgb led keyboard with per key rgb led
fully programmable
kit with soldered smd components and case with plate
Assuming I can find one...how much should I expect to pay for an IBM Unsaver? 1387033.
$250.Nah, way more.
$250.Nah, way more.
I didn't include shipping.:))
$250.Nah, way more.
I didn't include shipping.
no keycaps or switches just pcb plate and caseWhat would you pay for a %40 rgb led keyboard with per key rgb led
fully programmable
kit with soldered smd components and case with plate
Does it come with keycaps?
if so, what profile and plastic type?
Is the case plastic or aluminum?
Is the plate acrylic, steel, or aluminum?
who manufactured the switches?
How much did these sell for. I believe it was from a little GB that was run may have been around 10 USD or something.
(Attachment Link)
I am guessing as I cannot remember how much it actually was. Yes it is.How much did these sell for. I believe it was from a little GB that was run may have been around 10 USD or something.
(Attachment Link)
$10 then? Is it a BS keychain?
I am guessing as I cannot remember how much it actually was. Yes it is.
$10 then? Is it a BS keychain?
I am guessing as I cannot remember how much it actually was. Yes it is.
$10 then? Is it a BS keychain?
If that is buckling spring then Unicomp sells them in any color you want for about $3
Of course shipping to Oz is far more than that.
Talking about the keychain not the cap.
How much did these sell for. I believe it was from a little GB that was run may have been around 10 USD or something.
(Attachment Link)
Any idea on how much would be an irresistible offer for a Soyuz kosmnavt? Really need one for my end game
Any idea on how much would be an irresistible offer for a Soyuz kosmnavt? Really need one for my end game
Depends on the person. You'd probably have better luck trading for one.
Any idea on how much would be an irresistible offer for a Soyuz kosmnavt? Really need one for my end game
Depends on the person. You'd probably have better luck trading for one.
Do you have any idea what a fair offer would be in the current market?
Any idea on how much would be an irresistible offer for a Soyuz kosmnavt? Really need one for my end game
Depends on the person. You'd probably have better luck trading for one.
Do you have any idea what a fair offer would be in the current market?
I don't know what they retailed for but I'd imagine $50 minimum.
Have some stuff laying around I'm never gonna use. 1 NIB Shine 3 Full size, MX blue, blue LEDs, and a set of SIP sockets to do a full board. The SIP sockets are the long ones that stick out of the bottom of the PCB when soldering. I bought the sips in the group buy last year.
Have some stuff laying around I'm never gonna use. 1 NIB Shine 3 Full size, MX blue, blue LEDs, and a set of SIP sockets to do a full board. The SIP sockets are the long ones that stick out of the bottom of the PCB when soldering. I bought the sips in the group buy last year.
The Shine would be whatever you purchased it for and the SIPs can probably be sold for just over 20 cents a pair. Zeal sells his at $15 for 65 pairs of SIPs.
Trying to figure out what a Carbon Base set would go for
Backlit White Pok3r with Cherry Mx Clears W/ Original Box and stock keycaps which were unused.
May be parting(trading) some of my collection soon as i'd like to keep it to boards i actually use at least once a week. Much as it's fun i really can't justify keeping around this many boards that sit boxed so looking to price check a few before i consider listing them.
#1 KBP V60 Dual LED Cherry MX Whites Limited Edition W/ Blank Black PBT Cherry profile Keycaps. Comes with original Box (slight dent on box) board used for 10 minutes total.
#2 KBP V60 Dual LED Cherry MX Blacks W/ (Keycaps TBD so assume stock ones for pricing) Comes with original Box everything in Mint condition
#3 KBP V60 Non Backlit Matias Clicky W/ Dolche DOubleshot ABS Keycaps (No box for this one)
#4 White Pok3r MX Clears Backlit W/ Carbon Black PBT Doubleshot OEM Keycaps and modded with Thick Blue O-Rings Comes with original Box everything in mint condition (Already got a response for this one beforehand but changed keycaps on it to something better than stock)
Those are the only ones I'd be looking at trading for now, however looking to get monetary estimates on them all so i know what reasonable trade requests are.
CHeers!
I have some original cherry doubleshot keys from a G80-1000HAU (ANSI layout). The "1" key has some markings that seem like they can't be cleaned off, and a few keycaps have some scuffs on the sides. Otherwise, most of them look great. Any idea on value, given the issues they have?
Does anyone know what a Jd40 Deep Space set is worth atm? Sorry but I don't have any pictures at the moment.
Silver Hammer 60% case. Forgot what it cost originally, have no clue what it is worth now.
Silver Hammer 60% case. Forgot what it cost originally, have no clue what it is worth now.
original or clone?
Pretty sure original because I purchased it back around the same time as the LZ-CE and FMJ 60% cases.
Hey mates,
I recently purchased a mint condition poker 2 with MX clears (with original keycaps) + a granite set.
I bought the bundle for roughly $200, its a great deal considering the poker is in mint condition and what im really after are the Granite keyset.
So now im letting go of this poker 2, how much would be a fair price?
This poker is from massdrop, arrived here last feb here in the PH and is clearly in mint condition because the previous owner got a topre board and absolutely loved it. :D
Cheers!
Hey mates,
I recently purchased a mint condition poker 2 with MX clears (with original keycaps) + a granite set.
I bought the bundle for roughly $200, its a great deal considering the poker is in mint condition and what im really after are the Granite keyset.
So now im letting go of this poker 2, how much would be a fair price?
This poker is from massdrop, arrived here last feb here in the PH and is clearly in mint condition because the previous owner got a topre board and absolutely loved it. :D
Cheers!
considering poker 3's go for about $100 second hand I'd take $25 off the price (so around $75 total w/original keycaps and case)
Hey mates,
I recently purchased a mint condition poker 2 with MX clears (with original keycaps) + a granite set.
I bought the bundle for roughly $200, its a great deal considering the poker is in mint condition and what im really after are the Granite keyset.
So now im letting go of this poker 2, how much would be a fair price?
This poker is from massdrop, arrived here last feb here in the PH and is clearly in mint condition because the previous owner got a topre board and absolutely loved it. :D
Cheers!
considering poker 3's go for about $100 second hand I'd take $25 off the price (so around $75 total w/original keycaps and case)
Isnt that a bit too cheap for a poker 2 with mx clears? i want to atleast spend less than $100 on my granite :D
Hey mates,
I recently purchased a mint condition poker 2 with MX clears (with original keycaps) + a granite set.
I bought the bundle for roughly $200, its a great deal considering the poker is in mint condition and what im really after are the Granite keyset.
So now im letting go of this poker 2, how much would be a fair price?
This poker is from massdrop, arrived here last feb here in the PH and is clearly in mint condition because the previous owner got a topre board and absolutely loved it. :D
Cheers!
considering poker 3's go for about $100 second hand I'd take $25 off the price (so around $75 total w/original keycaps and case)
Isnt that a bit too cheap for a poker 2 with mx clears? i want to atleast spend less than $100 on my granite :D
Nope he is right. You'd be lucky to get $100. I'd think $75 is reasonable.
Keyboards like that are probably rare enough that they would be worth whatever people would be willing to pay for them.
I'm almost scared to ask this...
Xerox DocuTech Lime Green Alps Keyboard. Dusty, but good contdition. All keycaps intact.
Edit: I'm looking for a fair price. Not astronomical prices. Well...unless a high price is fair due to rarity.
Keyboards like that are probably rare enough that they would be worth whatever people would be willing to pay for them.
*facepalm* OK, That makes sense.
Sometimes it's nice to have a definitive value because you don't want to be an b****.
Edit: But I certainly understand why you'd say that given the nature of them.
Hello!
Trying out to figure a value of the new G80-1800HAU.
It's new in box, winkeyless, ANSI, produced in 2000, MX Blacks, DS keycaps.
How much does it costs?
Thanks!
Thats less than i paied for it...i tought keycaps only ~ 100$ :(Hello!
Trying out to figure a value of the new G80-1800HAU.
It's new in box, winkeyless, ANSI, produced in 2000, MX Blacks, DS keycaps.
How much does it costs?
Thanks!
I'd pay $50 for it, dude.
Can I get price check for Ivan Dolch base + color kit (mint condition)? The seller told me he would let it go with $250 shipped Int'l.
Thats less than i paied for it...i tought keycaps only ~ 100$ :(Hello!
Trying out to figure a value of the new G80-1800HAU.
It's new in box, winkeyless, ANSI, produced in 2000, MX Blacks, DS keycaps.
How much does it costs?
Thanks!
I'd pay $50 for it, dude.
Can I get a PC on a topre 3D skull clack?
How much should I expect to pay for a board with SKCM Blues? A basic full sized board with a somewhat normal layout ISO/ANSI layout in clean condition.
No, I just mean something that's not using a bizarre XT layout or something.How much should I expect to pay for a board with SKCM Blues? A basic full sized board with a somewhat normal layout ISO/ANSI layout in clean condition.
If by "normal layout" you mean no bigass Enter or 1u Backspace, then probably $400+ and you will have to wait many months or years to find one.
Very old Northgates (with gold foil label instead of trap door) turn up on ebay a few times a years and sell in the $200 +/- range.
There are odds and ends that pop up from time to time but it is a byzantine search.
With white alps?! ewww
I'm almost scared to ask this...
Xerox DocuTech Lime Green Alps Keyboard. Dusty, but good contdition. All keycaps intact.
Edit: I'm looking for a fair price. Not astronomical prices. Well...unless a high price is fair due to rarity.
Topre Hexter's Notion Fugu?
Would anyone mind giving me a good price estimate for my novatouch tkl? 2-3 months of use. (mint stock caps)
Value of PBT Cherry OG from TA Royal Satellite Typewriter? Includes the full set. Great condition.
Thanks guys!
Value of PBT Cherry OG from TA Royal Satellite Typewriter? Includes the full set. Great condition.
Thanks guys!
Can we get a photo?
Value of PBT Cherry OG from TA Royal Satellite Typewriter? Includes the full set. Great condition.
Thanks guys!
Can we get a photo?
Photos of what's on my board and the rest of the set.Show Image(http://uploads.tapatalk-cdn.com/20160807/2230ace267d661ff3d48fa22911d4b8d.jpg)Show Image(http://uploads.tapatalk-cdn.com/20160807/a88dda3befbc669f016154cfccb3a9af.jpg)
I've paid between $20 and $50 for the sets I've found online or on craigslist. I know someone was selling AZERTY sets for a fair bit more than that. Since they're only really partial sets that require mods to flesh out, I personally feel that they're not worth more than $50.
How much would a full board of SKCL Browns go for?
I don't want to sell it I just wanted to get a price out of curiosity :'(How much would a full board of SKCL Browns go for?
You just got it yesterday, and you call it a daily driver, but you're already looking up prices to sell. This is so crazy, lol.
I bought mine for $59 (and it had 101 keys). It really depends on the demand. IF you throw out your line and go fishing for a while, you might run into someone who REALLY wants it. Otherwise, I'd say to expect average Alps prices, so anywhere from $70-100 or so. If the demand is high, I can see it tipping to around $200 or more if there's competition. If you really want to sell it, advertise on both of the forums, then list it on eBay.
SKCM Blue might not be as rare, but people are always looking for it and go crazy when an ANSI board is found, like $400 crazy. It's not fair considering the rarity of SKCL Brown in comparison, but that's demand for you.
It doesn't help that the rarity makes them obscure switches. Because they're lesser known, there's less hype around them. Combine that with often being confused with SKCM Brown, and yeah.
I don't want to sell it I just wanted to get a price out of curiosity :'(
What should I expect to pay for DCS Sanctuary? I have never seen this set except for the old MD photos.I wouldn't expect more than $90 to be fair for the base set which is what I paid roughly 2 years ago for mine, athough that being said didn't originative restock this somewhat recently?
What should I expect to pay for DCS Sanctuary? I have never seen this set except for the old MD photos.
It does but to me the the lock light row looks subtly different somehow, but it could just be me.I don't want to sell it I just wanted to get a price out of curiosity :'(
Oh, I hear you, haha.
Well, there are some people (at least one collector) I've noticed on eBay and from talking to friends who've sold some boards there that collect Korean Alps boards like the Leading Edge boards, the Epson AP1003A, and Visual terminal board, so I bet they'd pay a lot for your board. All of the aforementioned can also have SKCL Brown, but the Epson was undetermined, the LE was SKCM Blue, and the Visual was SKCL Green.
They all went for quite a bit though.
Looks like the Epson was SKCL Green, whoops.Show Image(http://i.ebayimg.com/images/g/HSUAAOSwh-1W6Aip/s-l1600.jpg)
It looks really similar to your Packard Bell. I wonder if it's a rebrand.
I don't want to sell it I just wanted to get a price out of curiosity :'(
What should I expect to pay for DCS Sanctuary? I have never seen this set except for the old MD photos.
I paid around $130 at the start of this year.
(TKL/Numpad/WKL/Extra Num Row/Stepped Caps Lock/Extra Keys)
Hope that helps :)
I am planning to buy my first IBM SSK.What is the price range of a like new or mint condition SSK?I don't really care about bolt-modded.Thanks:D
i want to ask how much is hws
-keyng v3 duckpie
-skulthulu duckpie
Need to do a little price check for a GMK Dolch, with the teal add-onsI had offers around $200-220 with the Sky Dolch addons (I don't know if you mean those).
Need to do a little price check for a GMK Dolch, with the teal add-onsI had offers around $200-220 with the Sky Dolch addons (I don't know if you mean those).
Hey All! Cleaning house, funding a GB, price check on aisle FML:
- R2 KeyKollectiv Oxblood Mods (Topre)
- R2 KeyKollectiv Bianci Mods minus tab and delete (Topre)
- Bomb King Set (Topre)
- Trans Purple Keybuto (Topre)
- PuLSE TKL with Zambloos and Novelties(MX)
Thanks,
MaNiFeX
Hey All! Cleaning house, funding a GB, price check on aisle FML:
- R2 KeyKollectiv Oxblood Mods (Topre)
- R2 KeyKollectiv Bianci Mods minus tab and delete (Topre)
- Bomb King Set (Topre)
- Trans Purple Keybuto (Topre)
- PuLSE TKL with Zambloos and Novelties(MX)
Thanks,
MaNiFeX
Hey All! Cleaning house, funding a GB, price check on aisle FML:
- R2 KeyKollectiv Oxblood Mods (Topre)
- R2 KeyKollectiv Bianci Mods minus tab and delete (Topre)
- Bomb King Set (Topre)
- Trans Purple Keybuto (Topre)
- PuLSE TKL with Zambloos and Novelties(MX)
Thanks,
MaNiFeX
Expressing interest for the KK mods.
Hey All! Cleaning house, funding a GB, price check on aisle FML:
- R2 KeyKollectiv Oxblood Mods (Topre)
- R2 KeyKollectiv Bianci Mods minus tab and delete (Topre)
- Bomb King Set (Topre)
- Trans Purple Keybuto (Topre)
- PuLSE TKL with Zambloos and Novelties(MX)
Thanks,
MaNiFeX
Expressing interest for the KK mods.
I'll give you ten more $ than brig=)
Hey All! Cleaning house, funding a GB, price check on aisle FML:
- R2 KeyKollectiv Oxblood Mods (Topre)
- R2 KeyKollectiv Bianci Mods minus tab and delete (Topre)
- Bomb King Set (Topre)
- Trans Purple Keybuto (Topre)
- PuLSE TKL with Zambloos and Novelties(MX)
Thanks,
MaNiFeX
Dang, those Bomb Kings... :'(
Gritty Reaper Classic - MX Price Check please! Looking to pop my artisan key cherry
Hello guys, I have 102 ISO keycaps, PT layout (cannot identify the material ) and 102 Alps White switches, how much it's worth?
(https://abload.de/thumb/img_0422szup2.jpg) (http://abload.de/image.php?img=img_0422szup2.jpg)
What's the value of a Duck Viper v1 w/ Greens?Hard to say as you never see any. Seeming you can see Octagons go for $600+ then I'd
What's the value of a Duck Viper v1 w/ Greens?
Time Stamp: http://i.imgur.com/Wwietb4.jpg
Looking to sell my black Viper with MX Blue switches and cyan LEDs. No damage whatsoever. I will include a pair of acrylic insert.
Local Prefer (Toronto, ON, CA)
Looking for $500 USD
Thanks for looking.
28 commentssharesavehidegive goldreport
Price check on metal wingnut.$1.50 at home depot
Price check on metal wingnut.$1.50 at home depot
Price check on metal wingnut.
Price check on metal wingnut.
Price check on metal wingnut.
Have there even been any sold outright? Probably gonna be hard to price check.
Price check on metal wingnut.
Metal wingnut?
Price check on metal wingnut.
Have there even been any sold outright? Probably gonna be hard to price check.Price check on metal wingnut.
Metal wingnut?
Hang on, let me get a pic.More[attachimg=1]
Price check on metal wingnut.
Have there even been any sold outright? Probably gonna be hard to price check.Price check on metal wingnut.
Metal wingnut?
Hang on, let me get a pic.More[attachimg=1]
There's 1 cap in particular that got me interested in this hobby and that is the Columbia Kosmonavt. I would love for it to be the cap that starts off my collection. So yea, what would it's cash value be?Depends how badly you want it. I've seen anywhere from $50/retail to $120.
Pretty bad but most I've seen have been for trades so I'll just have to keep my eyes open. Thanks for the infoThere's 1 cap in particular that got me interested in this hobby and that is the Columbia Kosmonavt. I would love for it to be the cap that starts off my collection. So yea, what would it's cash value be?Depends how badly you want it. I've seen anywhere from $50/retail to $120.
PC on my dignity.
price elks
Sent from my iPhone using Tapatalk
priceless*** my phone seems to think it's worth 1 elkPC on my dignity.
price elks
Sent from my iPhone using Tapatalk
What does that mean?
Sent from my iPhone using Tapatalk
priceless*** my phone seems to think it's worth 1 elkPC on my dignity.
price elks
Sent from my iPhone using Tapatalk
What does that mean?
Sent from my iPhone using Tapatalk
priceless*** my phone seems to think it's worth 1 elkPC on my dignity.
price elks
Sent from my iPhone using Tapatalk
What does that mean?
Sent from my iPhone using Tapatalk
Forget that guys elk, i'll give you 2 goats and a bag of sand for it
priceless*** my phone seems to think it's worth 1 elkPC on my dignity.
price elks
Sent from my iPhone using Tapatalk
What does that mean?
Sent from my iPhone using Tapatalk
Forget that guys elk, i'll give you 2 goats and a bag of sand for it
make it 3 elk
Sent from my iPhone using Tapatalk
Price check on the cheapest CF ogre?
Hypersphered Novatouch?
also on wingnut
and freedom eagle.
Price check on Bloodsport Mummy lll.
Price check on Bloodsport Mummy lll.
No one has sold one aftermarket but some have been traded. Depending on the person it could trade for a v2 or a mummy ii so take that as you will based on current prices for those.
Price check on Bloodsport Mummy lll.
No one has sold one aftermarket but some have been traded. Depending on the person it could trade for a v2 or a mummy ii so take that as you will based on current prices for those.
I see, what monetary aftermarket trade value do those (mummy ll ,V2) have. I ask because I wanna trade something that costs $150 for one and was wondering if that's enough or too much. Thanks
What should I expect to have to pay for about 65 original tactile alps?
What should I expect to have to pay for about 65 original tactile alps?
Which tactile Alps?
What should I expect to have to pay for about 65 original tactile alps?
Which tactile Alps?
Yeah, that's kind of the problem, isn't it...?
I want to replace my Matias, but I know almost nothing about actual Alps switches. So...
How about the most common/easy to find tactile ones?
And what would I pay for those?
Sent from my SM-G920F using Tapatalk
And what would I pay for those?
Sent from my SM-G920F using Tapatalk
People seem to buy AEKs for around 30 shipped minimum.
Maybe 20 bucks for 75-100 switches? is what Id pay.
Dunno whos gonna put in the work to desolder creams though only to sell them.
Best bet is to try to get a salmon or orange aek. same price most likely and a better switch.
still gotta do the work.
And what would I pay for those?
Sent from my SM-G920F using Tapatalk
People seem to buy AEKs for around 30 shipped minimum.
Maybe 20 bucks for 75-100 switches? is what Id pay.
Dunno whos gonna put in the work to desolder creams though only to sell them.
Best bet is to try to get a salmon or orange aek. same price most likely and a better switch.
still gotta do the work.
Yeah, for an AEK II with SKCM Cream/White Damped switches, you can expect to pay about $30-40 shipped, CONUS at least. For an original AEK with SKCM Orange/Salmon, you should add about $20. You can also find Orange/Salmon Alps in other Apple boards from the same period, like the Apple Standard Keyboard (M0116) or the Apple Desktop Bus Keyboard.
Not sure if those would be easy to get in Europe. These Apple boards are pretty common in the US, but based on what I've heard from another European member, they are more rare on the other side of the pond.
And what would I pay for those?
Sent from my SM-G920F using Tapatalk
People seem to buy AEKs for around 30 shipped minimum.
Maybe 20 bucks for 75-100 switches? is what Id pay.
Dunno whos gonna put in the work to desolder creams though only to sell them.
Best bet is to try to get a salmon or orange aek. same price most likely and a better switch.
still gotta do the work.
Yeah, for an AEK II with SKCM Cream/White Damped switches, you can expect to pay about $30-40 shipped, CONUS at least. For an original AEK with SKCM Orange/Salmon, you should add about $20. You can also find Orange/Salmon Alps in other Apple boards from the same period, like the Apple Standard Keyboard (M0116) or the Apple Desktop Bus Keyboard.
Not sure if those would be easy to get in Europe. These Apple boards are pretty common in the US, but based on what I've heard from another European member, they are more rare on the other side of the pond.
Good point, I hadn't thought about the international aspect.
Holding out here in the us, you could eventually find a better switch apple board for fairly cheap.
I think I need to find a community member who can find, buy, desolder and send the switches to me. Oh well, this doesn't have to happen now...pm'd
price-check on Calm Depths SA? Alphas + mods + numpad + GH key.
price-check on Calm Depths SA? Alphas + mods + numpad + GH key.
Anyone??
price-check on Calm Depths SA? Alphas + mods + numpad + GH key.
Anyone??
list it for $600 on mm and see what happens? :p
price-check on Calm Depths SA? Alphas + mods + numpad + GH key.
Anyone??
list it for $600 on mm and see what happens? :p
Electric Marmalade Splatter Fugu set (T), how much it sells now? All of the thread only ask for trade.
Price check on the cheapest CF ogre?
Hypersphered Novatouch?
also on wingnut
and freedom eagle.
Probably $250 for Gumrot
Base cost of novatouch + cost of hypersphere rings
Can't tell if joke or not.
Price check on the cheapest CF ogre?
Hypersphered Novatouch?
also on wingnut
and freedom eagle.
Probably $250 for Gumrot
Base cost of novatouch + cost of hypersphere rings
Can't tell if joke or not.
Apparently they're a little higher than that, about $400: http://www.ebay.com/itm/Clack-Factory-Gummyrot-Ogre-Cherry-MX-FXE-logo-/191952854598?hash=item2cb1481e46:g:dWEAAOSwawpXvQWf
Price check on the cheapest CF ogre?
Hypersphered Novatouch?
also on wingnut
and freedom eagle.
Probably $250 for Gumrot
Base cost of novatouch + cost of hypersphere rings
Can't tell if joke or not.
Apparently they're a little higher than that, about $400: http://www.ebay.com/itm/Clack-Factory-Gummyrot-Ogre-Cherry-MX-FXE-logo-/191952854598?hash=item2cb1481e46:g:dWEAAOSwawpXvQWf
Yeah that's a gummyrot which is rarer than Gumrot plus basing prices off eBay isn't always the best. People usually get caught up in the auction so caps will sell for more on ebay than private sales.
Price check on Penumbra SA with base, mods, numpad, and ISO extras? No solarized alphas, I'd probably be keeping the set if I'd bought them. :/
price check on 110 Hypersphere rings?
HHKB Pro2 white printed Openbox ?
Found an old G80-0414 H /07 with OG cherry caps, no idea if the black switches are vintage or not.Bump?
Wondering what it's worth.
Edit : Date code is A16 (16th week of 1988)
Found an old G80-0414 H /07 with OG cherry caps, no idea if the black switches are vintage or not.Bump?
Wondering what it's worth.
Edit : Date code is A16 (16th week of 1988)
So, i bought a novatouch just to harvest the sliders, and now i just have a bunch of spare parts. Are topre domes, springs and housings worth anything? How about just the novatouch case by itself?
I'm pretty sure it's non functionnal, I might harvest the switches and the doubleshot keycaps.Found an old G80-0414 H /07 with OG cherry caps, no idea if the black switches are vintage or not.Bump?
Wondering what it's worth.
Edit : Date code is A16 (16th week of 1988)
What's the condition? Any photos?
1988 would almost certainly indicate vintage black switches in that keyboard.
The board needs a Soarer's converter to work on a modern PC...I don't want to give a specific number since I'm not really sure, but it's not that much unless NIB
So, i bought a novatouch just to harvest the sliders, and now i just have a bunch of spare parts. Are topre domes, springs and housings worth anything? How about just the novatouch case by itself?Probably get a bit for the parts but not that much. I wouldn't expect much, you'd just be selling parts (of course) for people to use as replacements.
looking for a price on a topre clack "depth" (black)There's a separate thread for clack pricing.
compared to some clacks selling on ebay and /r/mm im thinking $2-300?
- Realforce 103 UB 55g Uniform (9/10 exterior condition, 10/10 interior, lubed with Krytox 205)
- SSK 04/08/1987 #1391472 (9/10 exterior condition, works fine but has some rivets come loose inside, I can hear it)
Both feet are fine, comes with coiled ps2 cable, no missing caps (in fact comes with new spacebar+wire and blue blank esc key from clickykeyboards), no mods.
Price for the following BBv2(topre)?
1) Interstellar+Cosmic Dusk
2) Deutsche
cheers
Price for the following BBv2(topre)?
1) Interstellar+Cosmic Dusk
2) Deutsche
cheers
Deutsche is tough to judge due to the fact that the owners probably won't let it go.
Interstellar+Cosmic Dusk? If you mean either of them, Interstellar of any color is $200 minimum but they are highly sought after. Cosmic Dusk is even rarer though so I doubt the owners will let it go.
Price for the following BBv2(topre)?
1) Interstellar+Cosmic Dusk
2) Deutsche
cheers
Deutsche is tough to judge due to the fact that the owners probably won't let it go.
Interstellar+Cosmic Dusk? If you mean either of them, Interstellar of any color is $200 minimum but they are highly sought after. Cosmic Dusk is even rarer though so I doubt the owners will let it go.
Ah I see, thanks a lot!
Both feet are fine, comes with coiled ps2 cable, no missing caps (in fact comes with new spacebar+wire and blue blank esc key from clickykeyboards), no mods.
I think decent shape SSKs are around 250+shipping
Both feet are fine, comes with coiled ps2 cable, no missing caps (in fact comes with new spacebar+wire and blue blank esc key from clickykeyboards), no mods.
I think decent shape SSKs are around 250+shipping
What would you price an ETF gold bag translucent red topre bomb king at?
What would you price an ETF gold bag translucent red topre bomb king at?
Free.
What would you price an ETF gold bag translucent red topre bomb king at?
Free.
Well then... that's disappointing. Is it actually something that's not desirable?
Anyone know what a heavily used tp4tissue is worth these days?
Anyone know what a heavily used tp4tissue is worth these days?
In the US or China?
How much do IBM display writer keyboards normally go for how often do they pop up? This is the one I'm looking forShow Image(https://s-media-cache-ak0.pinimg.com/736x/f3/39/f0/f339f0d3e02532c7ff475344d658b043.jpg)
I found and bid on one about a month ago and haven't seen one since. </3
Thanks!
How much do IBM display writer keyboards normally go for how often do they pop up? This is the one I'm looking forShow Image(https://s-media-cache-ak0.pinimg.com/736x/f3/39/f0/f339f0d3e02532c7ff475344d658b043.jpg)
I found and bid on one about a month ago and haven't seen one since. </3
Thanks!
How much do IBM display writer keyboards normally go for how often do they pop up? This is the one I'm looking for
how does the value of a rustler compare to other bro caps like the bro bot v2 or a reaper?
How much is RC930 - 45G ? ( Include everything )
How much does a NIB Model M go for nowadays? November 14, 1991.
How much does a NIB Model M go for nowadays? November 14, 1991.
Model Ms are always all over the place, you can never tell.
If it truly is NIB, I would start at $140-$150 (and maybe more if was a vintage Big Blue box in good condition) and drop the price by $10 every few days until it sells. My guess is that it would definitely sell well before it got under $100.
what if people see this
what if people see this
Operative word is "people" - plural - if there is only 1 interested buyer then the price would go low, but somebody who really wanted it would not take a chance on missing it and buy high.
To avoid that a seller puts it up for auction and takes his chances.
The psychology of selling is not a science.
Emotionally, I am a person who is more comfortable paying more for a "sure thing" if it is something that I really want.
Auctions are where I go to lowball things that I am indifferent to.
I bought a Nantucket Selectric tkl set before ever trying SA caps and received it today. I've since learned that the SA profile is not for me, and have a vacation coming up so I could use some cash in my pocket. What price should I list this for on here or other forums?
How much do you think a chicony kwd-601 with 104 aristotles cost? :D
How much do you think a chicony kwd-601 with 104 aristotles cost? :D
If they're good condition, I would price them competitively. Zealiostotles are a craze at the moment.
how does the value of a rustler compare to other bro caps like the bro bot v2 or a reaper?
I got one with mx stem at 60$ shipped CONUS around 2 months before.
G80-1800 with OG Doubleshots? :cool:
what do you think about a Novatouch in great condition (used 1 month), with PBT DyeSub from Varmilo, landing pad modded, ISO UK?
130$? 150$? more? less?
Thanks guyz
Original caps are in ISO ITA, terrible layout. But they are in nice condition. The PBT dyesub are brand new and the landing pad are from EK.what do you think about a Novatouch in great condition (used 1 month), with PBT DyeSub from Varmilo, landing pad modded, ISO UK?
130$? 150$? more? less?
Thanks guyz
Does it come with the original caps?
Id say probably 175-225
I have some Cherry Irish Keycaps(Ivan's PBT Round 4 buy) that I am thinking about selling.
I have not seen them being sold very often (and searching reveals very few results), so I have no idea what price to ask for.Show Image(http://i.imgur.com/GZDNJh0.jpg)
I have some Cherry Irish Keycaps(Ivan's PBT Round 4 buy) that I am thinking about selling.
I have not seen them being sold very often (and searching reveals very few results), so I have no idea what price to ask for.Show Image(http://i.imgur.com/GZDNJh0.jpg)
Usually PBT sets sell for 15-25% under retail if they have been used.
ABS has more variation due to the lack of longevity.
AEK IIs with Japanese keycaps?
SKCL Greens?
HHKB Pro 1?
Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
Hey Can someone educate me as to the provenance of this keycap?
http://imgur.com/a/urRqy
That one is being questioned for its legitimacy, though.Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
That one is being questioned for its legitimacy, though.Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
Does anyone know how much a Binge hoot would go for at this point? Same with a soyuz kosmo. Both of my endgame caps...
That one is being questioned for its legitimacy, though.Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
Does anyone know how much a Binge hoot would go for at this point? Same with a soyuz kosmo. Both of my endgame caps...
Hoots are extremely tough to get a hold of and I think you're best bet getting one is trading for one. Don't know about the kosmo though.
That one is being questioned for its legitimacy, though.Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
Does anyone know how much a Binge hoot would go for at this point? Same with a soyuz kosmo. Both of my endgame caps...
Hoots are extremely tough to get a hold of and I think you're best bet getting one is trading for one. Don't know about the kosmo though.
That's what I thought. I found someone who owns one and at this point I'm building up my collection to trade for it. I've got some bro's and a photochromatic binge cap coming so hopefully something there will be enough.
Yeah he said he might be willing to give it up though depending on what I end up receiving so fingers crossed I get something good from the hws sale.That one is being questioned for its legitimacy, though.Noxious BBv2 MXThere's an MX Noxious sitting unsold on mechmarket right now for $300+shipping/fees, so probably more like $300 tops (and less if it has the eye bleed a few of them have). (The eBay one was Topre and probably pumped up by shill bids.)
My thoughts were Noxious BBv2 sold on eBay for $350 so it would be valued $300+
Does anyone know how much a Binge hoot would go for at this point? Same with a soyuz kosmo. Both of my endgame caps...
Hoots are extremely tough to get a hold of and I think you're best bet getting one is trading for one. Don't know about the kosmo though.
That's what I thought. I found someone who owns one and at this point I'm building up my collection to trade for it. I've got some bro's and a photochromatic binge cap coming so hopefully something there will be enough.
It's not always a matter of how much but more about what. The few people I know with hoots are very attached to them and want very specific things.
Anyone know what a Purple and Orange V2 Keythulu is worth?
Specifically this one - http://imgur.com/MAuxAd5
Is a beige Dell AT101 worth $15? I found one on Craigslist and it's fairly clean.
Is a beige Dell AT101 worth $15? I found one on Craigslist and it's fairly clean.
Definitely a fair price. At the very least, it's a chassis for better switches.
Is a beige Dell AT101 worth $15? I found one on Craigslist and it's fairly clean.
Hey all, wondering what a Silver Orion V2 with acrylic angled bottom and assembled with Zealios (mx clear springs) is worth?Exactly what you paid in total. :-X
hi guys, my friend found a cm storm ultimate like new (just tested 1-2 times), but without warranty, layout FR, for 70 euros. Do u think it is worth?
thankss
Is a beige Dell AT101 worth $15? I found one on Craigslist and it's fairly clean.
It's worth a lot more than that (about 10x that or more to some) if it's the Alps SKCM Salmon version with PBT caps. Look to see if it's "Made in the USA," if it is, the chances are very high that it's got PBT and salmons.
hi guys, my friend found a cm storm ultimate like new (just tested 1-2 times), but without warranty, layout FR, for 70 euros. Do u think it is worth?Keep in mind, that QF Pro/Ultimate has the other spacebar-row spacing (i.e., NOT 1.25u modifiers & 6.25u spacebar) and the stock caps are mediocre.
thankss
Hey all, wondering what a Silver Orion V2 with acrylic angled bottom and assembled with Zealios (mx clear springs) is worth?Exactly what you paid in total. :-X
AAAAH damn...so isn't the same caps/layout of novatouch for example? Because I was thinking to replace that Fr layout with ita layout caps from NT...hi guys, my friend found a cm storm ultimate like new (just tested 1-2 times), but without warranty, layout FR, for 70 euros. Do u think it is worth?Keep in mind, that QF Pro/Ultimate has the other spacebar-row spacing (i.e., NOT 1.25u modifiers & 6.25u spacebar) and the stock caps are mediocre.
thankss
Furthermore, new-ish gaming keyboards like this aren't uncommon in that price range.
the Kissed Taffy Death Lives FC (Final Cut Version) MXI would say to the right person you could trade for just about anything. On average I'd guess 1:1 with most bro's or cc's.
How much will it be if it is for trade value?
the Kissed Taffy Death Lives FC (Final Cut Version) MXI would say to the right person you could trade for just about anything. On average I'd guess 1:1 with most bro's or cc's.
How much will it be if it is for trade value?
Considering selling my set of DSA Granite original round (probably less value?)
Common
+Icon Modifier
+Extra Homing
+Numpad
+Blue Enter
Thank you and thank you.
I have a barely used Black HHKB Pro 2 that I imported into the UK in January. I am considering selling it and replacing with another keyboard, but not sure. Likely going to buy a RealForce.Its a tricky one I would personally say Ł250 as few people seem to be buying the HHKBs listed anyway nowadays due to the Bluetooth model and if they do most buy them via a proxy rather than ebay prices, I would generally say Ł250 is reasonable if it is mostly new (No shine and what not) but I expect it to sit a while without selling honestly
I notice the "new" price on HHKB's have gone up quite a bit since I bought mine, no doubt due to the UK referendum on the EU earlier in the year affecting the Ł. New prices are Ł225! Ebay prices are into the Ł300's! (AND there would be import tax on top!)
Anyone know how much an MX snackman fugu is worth?
Anyone know how much an MX snackman fugu is worth?
At least $100, probably closer to $125 or possibly even more.
I see, thanks for your help. It is indeed a tricky one to gauge. I'll throw it up on the classifieds and see what kind of response I get. Overall I love the thing but layout is slightly too aggressive for me. Would be useful if I could remap the \ somewhere - I could just use the US layout but it's a pain in the backside ultimately.you could always get a Hasu controller to do the remapping with, those run around the $50 mark which would allow you to remap the entire thing too
hey guys, looking to get some idea what my IBM screenreader is worth, not sure how best to sell it. only a handful have surfaced hence the lack of pricing information
(will post worldwide if seller pays postage, i an located UK)
Information on this keypad is detailed here: https://geekhack.org/index.php?topic=43505.0 (https://geekhack.org/index.php?topic=43505.0)
Selling as whilst im still into keyboards and tech, I dont have the time or space for collecting.
Also just got back from a 6 month London to Moscow moped ride and short on cash.
note: I do not have the help/stop keys but the replacement pictured will be supplied.
note: Keyboard will need an active converter made to work with modern computer interfaces
Part NO 1393387 ID NO 0012808 DATE 10APR901393387 Unicomp list IBM screen reader keypad PS/2 18
FRU:1393515
Carton.package 6450602 '
Model F barrel with model m membrane, uses ps/2 but does not work over it currently.
(http://i.imgur.com/XHz7ETV.jpg) (http://i.imgur.com/XHz7ETV.jpg)
hey guys, looking to get some idea what my IBM screenreader is worth, not sure how best to sell it. only a handful have surfaced hence the lack of pricing information
(will post worldwide if seller pays postage, i an located UK)
Information on this keypad is detailed here: https://geekhack.org/index.php?topic=43505.0 (https://geekhack.org/index.php?topic=43505.0)
Selling as whilst im still into keyboards and tech, I dont have the time or space for collecting.
Also just got back from a 6 month London to Moscow moped ride and short on cash.
note: I do not have the help/stop keys but the replacement pictured will be supplied.
note: Keyboard will need an active converter made to work with modern computer interfaces
Part NO 1393387 ID NO 0012808 DATE 10APR901393387 Unicomp list IBM screen reader keypad PS/2 18
FRU:1393515
Carton.package 6450602 '
Model F barrel with model m membrane, uses ps/2 but does not work over it currently.
(http://i.imgur.com/XHz7ETV.jpg) (http://i.imgur.com/XHz7ETV.jpg)
Hello everyone...
I stumbled across a couple of very clean model M boards (buckling springs), trying to get a general idea of value and interest.
Both have oval grey IBM logos on upper left corners (not silver square or oval blue), have removable PS2 cables, and are very clean.
1) 1994 Lexmark (made for IBM)
2) 1992 IBM (MADE IN USA)
I would appreciate input as to their value and or demand (range is preferred) - I'm a cherry guy, just stumbled across them and want to find them good homes... Need to know whats fair and reasonable range as far as asking prices. Fleabay has Lexmark versions around $50, and the IBM version going as high as $275 (shocked! - but its fleabay ~ not the real world)
Thanks,
Paul (HB)
Hello everyone...
I stumbled across a couple of very clean model M boards (buckling springs), trying to get a general idea of value and interest.
Both have oval grey IBM logos on upper left corners (not silver square or oval blue), have removable PS2 cables, and are very clean.
1) 1994 Lexmark (made for IBM)
2) 1992 IBM (MADE IN USA)
I would appreciate input as to their value and or demand (range is preferred) - I'm a cherry guy, just stumbled across them and want to find them good homes... Need to know whats fair and reasonable range as far as asking prices. Fleabay has Lexmark versions around $50, and the IBM version going as high as $275 (shocked! - but its fleabay ~ not the real world)
Thanks,
Paul (HB)
$50 to maybe $125 depending on condition and if it has been bolt modded/requires bolt modding. The 275 one is probebly a space saver or a new in box one. Or the seller needs more drugs.
If i was to buy one i would consider $75 a good deal if all rivets were still good. 85-110 would be fair if it was older model and over $110 a little pricy.
But then again an item is really worth what someone is willing to pay.
Price of Kosmonavt cap? Thanks!
Price of Kosmonavt cap? Thanks!
What stem and color?
ETF Electric marmalade is worth around 135, right?
Price of Kosmonavt cap? Thanks!
What stem and color?
Topre stem, all the colors if you know the price haha
Also wondering the PC for Celestial Blue BroBot Topre (assuming these exist, bit of a noob)
I have a Das Professional (2012), MX Blues, non-blank stock caps, all in decent shape (some caps have some shine from use).
I don't use it anymore, so I'd prefer if it funded other boards that I will.
Photo sans-caps:Show Image(http://i.imgur.com/uEa3K4d.jpg)
Looking to trade a KK Miso MX artisan. Wondering what's the going price for them so I can value it fairly in a trade? Thanks!
Looking to trade a KK Miso MX artisan. Wondering what's the going price for them so I can value it fairly in a trade? Thanks!
~80-100
Looking to trade a KK Miso MX artisan. Wondering what's the going price for them so I can value it fairly in a trade? Thanks!
~80-100
What the the... Really?!
$550 for a silver BBV2? Is that about right?
[PC] On my CC Hack Orange (I think that's the right color name) in Topre! IMGUR album: https://imgur.com/a/f4YUd~200 maybe a little lower
Off topic question? I'm trying to sell my Flamingo Fugu... but I can't find the Post new trend button in Classifieds. Can anyone point me to where that is?
http://imgur.com/gallery/MzyAa
How much are poker 2s going for now?
PC on TMX Mummy III?$200-350 depending on the colour mainly
Anyone know what a granite base and ergo should go for?
What's the value of a keyboard with Zealios 65g switches?
Someone on geekhack is trying to sell Rosewill keyboard, Cm Quickfire Rapid, Ducky Zero keyboard for $180 each. That's like $150 more than the price of a normal secondhand board on ebay. Can the switches be so special?
What's the price for GMK Hyperfuse, unused? Also, a 55g HHKB? Looking to sell.
Oh, and a set of GMK 9009, interested in buying in conditions from unused to very used. Seeing as it's a recent release, I guess "very used" would be rare, but hey. Thanks! :thumb:
Price check on Ducky YOTG w/ mx blacks? Barely used and everything is still there.Probably around $400.
How much a Laser IFS80-9060 keyboard, with missing spacebar, would be worth?
Price check on Ducky YOTG w/ mx blacks? Barely used and everything is still there.Probably around $400.
Some user on reddit said he sold his for $420 but that was with browns which is the most sought after of the three.
Thank you, finally an answer... :)
How much a Laser IFS80-9060 keyboard, with missing spacebar, would be worth?
The missing space bar is a major problem on an obscure keyboard with little prospect for replacement parts.
I have had a couple of those (with far less desirable bigass Enter, as I remember) and they are really nice keyboards, but yours is not in great shape.
There are SMK projects in the works, so if you part it out, you should save the switches as well as the caps.
What's a brown topre cherokey (http://imgur.com/6zfYjqK) worth?
How much would a Dolphin 1 Limited Edition with a brass top cost?
How much would a Dolphin 1 Limited Edition with a brass top cost?
We're talking minimum $1500, if you're trying to be nice.
The reality is, as far as my knowledge goes, a Dolphin has never publicly sold in the after-market. And I can't even find pictures of the brass top (you should post some).
How much would a Dolphin 1 Limited Edition with a brass top cost?
We're talking minimum $1500, if you're trying to be nice.
The reality is, as far as my knowledge goes, a Dolphin has never publicly sold in the after-market. And I can't even find pictures of the brass top (you should post some).
Dolphin 1 Limited Edition w/ Brass Top and Dolphin v2 with the only acrylic bottom made.
What's a crouching oasis hidden zealios skullthulu worth?
Sent from my iPhone using Tapatalk
Thanks, I bought it for 120 from someone and I've gotten offers of like 250, but I only trade my keys really.What's a crouching oasis hidden zealios skullthulu worth?
Sent from my iPhone using Tapatalk
Well it was $70 shipped from HWS. Trade value would be a bit more subjective as some people really value skulthulu's pretty high.
Thanks, I bought it for 120
Unlikely to trade for anything but a ribbit, it's one of my favorites!Thanks, I bought it for 120
you got a very good deal then, keep it or trade for something special
Unlikely to trade for anything but a ribbit, it's one of my favorites!Thanks, I bought it for 120
you got a very good deal then, keep it or trade for something special
Sent from my iPhone using Tapatalk
I know it sucks :(Unlikely to trade for anything but a ribbit, it's one of my favorites!Thanks, I bought it for 120
you got a very good deal then, keep it or trade for something special
Sent from my iPhone using Tapatalk
Ribbit might be tough to trade for at the moment.
Trying to buy some zealios and found some but we don't really know a price. He has 90 round 3 62g zealios. Anyone know an average price?He doesn't know what he paid for it?
Trying to buy some zealios and found some but we don't really know a price. He has 90 round 3 62g zealios. Anyone know an average price?
What's a Ramage RV8 spacebar worth in trades?
Thanks in advance! :)
What's a Ramage RV8 spacebar worth in trades?
Thanks in advance! :)
:mad:
Probably a few good artisans since they are so rare but at the same time it will net you some big community demerits.What's a Ramage RV8 spacebar worth in trades?:mad:
Thanks in advance! :)
Hi all, what's a fair price to offer for a Mr. Beveridge's Maggot fugu in MX?1867.79 Pesos
Thanks!
Hi all, what's a fair price to offer for a Mr. Beveridge's Maggot fugu in MX?1867.79 Pesos
Thanks!
Yeah that's what I would offer, don't go higher than 100 imoHi all, what's a fair price to offer for a Mr. Beveridge's Maggot fugu in MX?1867.79 Pesos
Thanks!
I can't tell if you're being facetious, but assuming that you're talking about Mexican pesos, $90 USD is a non-insulting price to offer?
Yeah that's what I would offer, don't go higher than 100 imo
Probable, I've seen lots on mechmarket being sold for 90-100
Yeah that's what I would offer, don't go higher than 100 imo
Thank you kindly! Here's hoping I can easily get one (since it's fairly new) for a hyperfuse build. :thumb:
I don't know. Think he was seeing if I knew what they were worth before he tried to gas me. I ended up buying 80 r4 62g for a dollar a piece shipped. So I guess it worked out.Trying to buy some zealios and found some but we don't really know a price. He has 90 round 3 62g zealios. Anyone know an average price?He doesn't know what he paid for it?
That's a fair deal. :)I don't know. Think he was seeing if I knew what they were worth before he tried to gas me. I ended up buying 80 r4 62g for a dollar a piece shipped. So I guess it worked out.Trying to buy some zealios and found some but we don't really know a price. He has 90 round 3 62g zealios. Anyone know an average price?He doesn't know what he paid for it?
Price check on Ducky YOTG w/ mx blacks? Barely used and everything is still there.Probably around $400.
Some user on reddit said he sold his for $420 but that was with browns which is the most sought after of the three.
Why would anyone pay so much for a ducky board? That is insane.
leading edge dc-2014 with yellowed case but clean/smooth blue switches?
Sent from my LG-H502 using Tapatalk
Those seem to be going for around $100 +/- $20 or so on eBay
Hey, anyone know how much a warus v1 is worth? I have a chance to buy a white base one with a grey top seller asking for 225? Fair or no?
Sent from my iPhone using Tapatalk
Thanks for the inputHey, anyone know how much a warus v1 is worth? I have a chance to buy a white base one with a grey top seller asking for 225? Fair or no?
Sent from my iPhone using Tapatalk
Seems A BIT high. But they are hard to come by. I was thinking like 140$ but that's just me.
Sent from my iPhone using Tapatalk
Essence of Kirkle bbv2
MX and thanks for the responseEssence of Kirkle bbv2
$300+ probably, depending on stem type.
I am trading an SA set for something and I was offer DSA Granites I believe can fill up a TKL board. He said it was from round 2 (not sure if there were any difference with each round).. anyone can give me an idea how much these are worth now?They're retail right here: http://pimpmykeyboard.com/keysets/
Looking for a price check on a 55g uniform RF87u with a rekt spacebar. Hella shine on its right side. All well and good otherwise.
Also, would attempting to trade it for something with Zealios and possibly underglow be an asinine thing to do?
Looking for a price check on a 55g uniform RF87u with a rekt spacebar. Hella shine on its right side. All well and good otherwise.
Also, would attempting to trade it for something with Zealios and possibly underglow be an asinine thing to do?
If it's really bad it may pay to get a pbt spacebar to replace it. They are $222 at [amazon][https://www.amazon.com/Realforce-87U-Tenkeyless-55g-Black/dp/B00MV84Y2Yl] right now. Totally reasonable to try trade it for a zealios board.
Do you guys think I could trade a crouching oasis hidden zealios skullthulu for some new booper stuff?
The perfect odds, thanksDo you guys think I could trade a crouching oasis hidden zealios skullthulu for some new booper stuff?
I'd say possible but not probable.
I'm looking for a price check of DCS Lily keycap set (base + modifiers + tsangan) with good condition :thumb:
Thank you, i see but that kit isn't full (only base + modifiers and tsangan), the seller told me that, he was wrong. I tried to ask him about price check and no response :(I'm looking for a price check of DCS Lily keycap set (base + modifiers + tsangan) with good condition :thumb:
Last one that was purchased that I know of went for $150 for the full kit
Thank you, i see but that kit isn't full (only base + modifiers and tsangan), the seller told me that, he was wrong. I tried to ask him about price check and no response :(I'm looking for a price check of DCS Lily keycap set (base + modifiers + tsangan) with good condition :thumb:
Last one that was purchased that I know of went for $150 for the full kit
Yes it isThank you, i see but that kit isn't full (only base + modifiers and tsangan), the seller told me that, he was wrong. I tried to ask him about price check and no response :(I'm looking for a price check of DCS Lily keycap set (base + modifiers + tsangan) with good condition :thumb:
Last one that was purchased that I know of went for $150 for the full kit
I am not talking about the set that was recently posted. I was talking about one that was sold a few months back.
Edit: Also it looks like the set that sold a few days ago was Base, mods and tsangan kit.
Clack Factory Oktoberfest Keycap MX, how much is this worth in paypal usd anyone knows?
Price check on a GID Noxious Reaper? Ive been getting some lowball trade offers, have the og reapers lost their value or something?Show Image(http://i.imgur.com/zRrA6Cg.jpg)Show Image(http://i.imgur.com/5vy0a4P.jpg)
Ive been getting some lowball trade offers, have the og reapers lost their value or something?
I only got $65 out of my white keycool with MX clears.
I have an original run of KeyCool 84 keyboards, both with white body. One MX Blue and the other is MX Clear. Both haven't seen much use...I really wanted MX Blacks with a Black body, but they were sold out and I wanted to try them because I love the 75% layout. I don't even have the box for them sadly, they're sitting in my storage closet. I'm still looking everywhere for a KC84 MX Black, but it looks like only the Kailh Blacks with Black body are available on eBay.
I'm unsure if there is even a demand since they've been discontinued. Any luck? I'd probably just trade both for them for a Black/Black at this point haha.Show Image(http://i.imgur.com/0Zoyzt4.jpg)
Anyone got a price check on the ridic red brocaps full mx gamer set?u have one for sale?
Anyone got a price check on the ridic red brocaps full mx gamer set?u have one for sale?
Nah dude, looking for myself. I pretty much have nothing cool that I could sell if I wanted to:P
What's the going rate for a new set of hack'd SA caps?
What's the going rate for a new set of hack'd SA caps?
I saw a set that sold on /r/mm for $425 recently.
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
I would think the v2 is closer to $200 with the way they are selling on r/MM
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
I would think the v2 is closer to $200 with the way they are selling on r/MM
I just did a search on r/mm and the Fugu was $135, but I felt like that was a little overpriced?
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
I would think the v2 is closer to $200 with the way they are selling on r/MM
I just did a search on r/mm and the Fugu was $135, but I felt like that was a little overpriced?
Considering recent fugu aftermarket sales, no it isn't for one that is that desired.
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
I would think the v2 is closer to $200 with the way they are selling on r/MM
Looking to buy a Mr. Beveridge's Maggot but I'm not sure what to pay. Also would like to know how much a BBv2 Reactor core is.
I would look at around $100 for each, maybe a bit more for the fugu and a bit less for the brobot.
I would think the v2 is closer to $200 with the way they are selling on r/MM
My mistake. I thought it was a 2.5.
How much are Duck Vipers in the market? Do people ever sell for what they paid or do they always charge an arm and a leg?
Thanks for any help!
Need an opinion on a possible trade: Hexter's Notion Fugu for a War-Torn Defender.
Need an opinion on a possible trade: Hexter's Notion Fugu for a War-Torn Defender.
Do you think it is a good trade? The only opinion that matters is your opinion.
Need an opinion on a possible trade: Hexter's Notion Fugu for a War-Torn Defender.
Do you think it is a good trade? The only opinion that matters is your opinion.
I just don't want to low-ball the person I'm trading with. I know Fugus have gone up in price.
Edit: Especially since somebody was kind enough to sell me the Defender at retail
knowing what you paid and what your trading for's value is the best bet to know if the trade is worth it. I don't know the particulars for this trade however, since I don't collect these anymore, but that's just my advise.
How much are Duck Vipers in the market? Do people ever sell for what they paid or do they always charge an arm and a leg?
Thanks for any help!
I think the OTD is a bit more but I guess I'll just have to test the waters on it. Thanks for your answer!How much are full OG DCS sets such as raindrop and red alert valued in today's market?
red alert is $225-250 around that's just what I sold the OTD set for.
Price check on a blue orion v2 with angled acrylic base?
Price check on a blue orion v2 with angled acrylic base?
still need an answer or estimate :(
Hey! Price check on a Ducky Shine Mini, Cherry MX Blues, Red/Blue LED's. This is the one with the darker gray metal bezel. All original accessories included (keyboard cover, puller, all extra keys, right angle usb cord. box).
Thanks all.
Price check on a blue orion v2 with angled acrylic base?
How much do you think a fermented keyng is worth? Would 2 fugu from the newest sale be a good trade? (That's what I was offered)
Cool, pretty happy with getting two fugus since I just traded mine :)How much do you think a fermented keyng is worth? Would 2 fugu from the newest sale be a good trade? (That's what I was offered)
2 of the new Fugus might actually be worth a bit more than the Keyng, but if both parties are happy with the trade that's not always an issue.
How much would DSA HyperFuse go for right now? Is it still considered very valuable?
I'd say so, probably anywhere from $350-600, even with SA Hyperfuse out. DSA Hyperfuse is pretty uncommon.
On the topic of signs, I've been trying to find this sign for a few years, ever since I saw it at a local gaming shop:Why not make one ?Show Image(http://img06.deviantart.net/1f9d/i/2013/056/4/a/crash_bandicoot_collection_part_2_by_harrisonthehutt-d5w6gde.jpg)
The Tiny figure is blocking it, but it reads "Bandicoot Crossing."
I asked the store owner if he'd sell it and he said no; it's one of his favorite pieces in the store.
How much for a Disneyland Space Mountain sign?
How much for a Disneyland Space Mountain sign?
That is pretty cool. Am I correct in guessing that it is about 3 cm or less each way? If so, it would be an awesome keyboard badge.
How much for a Disneyland Space Mountain sign?
That is pretty cool. Am I correct in guessing that it is about 3 cm or less each way? If so, it would be an awesome keyboard badge.
It's pretty massive. Like 7"x 4" or so (guesstimate)
that's small.
Is a War-torn Defender Brobot a fair trade for a gen 3 fugu?I think so, gen 3 fugu might even be worth more
How much would a Granite Peaks Snapper be valued at right now?
R1 Hyperfuse unused
Would like to get a price check on a Leopold FC660C with just under 2 months of use.
How much could I expect to pay for:
SKIDATA+ base set, color pack, relegendable pack?
Any SKIDATA+ themed bingecap?
SKIDATA+ GMK logo pack with the orange/blue key?
Missed out on this buy and I can't find anyone selling stuff outright, so I'm trying to see how much I should ask for a WTB thread.
Wondering how much a Booper Lilith would be worth
Wondering how much a Booper Lilith would be worth
It's probably one of the less sought after Booper caps. That being said, it's a booper and they aren't up for sale very often. I would suggest $70-100, but I wouldn't be surprised if I saw one go for significantly more.
Das II? I almost never see them for sale.
Were topre 420 caps ever made? what are they worth if so?
Spirit of Freedom BBv2 in Topre or MX?
hey yo!
price check for the following? sorry if it's too many at once :))
1) CF Gumrot Ogre (MX)
2) Mummy II (Punk Purple) T
3) Booper Keywok (Gold) MX
4) BBv2 Blackout (MX)
Thanks man, doing a check as apparently someone sold an ogre for $500 on reddit :p
Thanks. Regardless of stem or is Topre about $40-50 cheaper?Spirit of Freedom BBv2 in Topre or MX?
Current market price for one is probably $300ish.
Thanks. Regardless of stem or is Topre about $40-50 cheaper?Spirit of Freedom BBv2 in Topre or MX?
Current market price for one is probably $300ish.
I seeThanks. Regardless of stem or is Topre about $40-50 cheaper?Spirit of Freedom BBv2 in Topre or MX?
Current market price for one is probably $300ish.
Typically they are equal in cost unlike clacks.
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
It may be different where you are, but SSK prices in the US are in a deep slump right now, and bolt-modding does not add much to the price (but it should).
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
It may be different where you are, but SSK prices in the US are in a deep slump right now, and bolt-modding does not add much to the price (but it should).
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
It may be different where you are, but SSK prices in the US are in a deep slump right now, and bolt-modding does not add much to the price (but it should).
Yeah, here that probably would go for about $200-$250.
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
It may be different where you are, but SSK prices in the US are in a deep slump right now, and bolt-modding does not add much to the price (but it should).
It was bolt modded out of necessity rather than for any other reason - it was totally knackered when I bought it as tons of the plastic rivets were broken but bolt modding it brought it back to life.
IBM Model M SSK - white case in good condition with additional RGB mods and red Esc. Bolt modded by yours truly.
It may be different where you are, but SSK prices in the US are in a deep slump right now, and bolt-modding does not add much to the price (but it should).
Yeah, here that probably would go for about $200-$250.
Thanks for the price :) What did they used to go for?
Anywhere up to $400-$500, depending on condition and mods.Uh.. what? I can't remember a single point in time during my membership here (4 years) where prices were anywhere near that high for an SSK. NIB maybe, but used? No chance.
Anywhere up to $400-$500, depending on condition and mods.Uh.. what? I can't remember a single point in time during my membership here (4 years) where prices were anywhere near that high for an SSK. NIB maybe, but used? No chance.
What did they used to go for?
wondering what the Bro limited edition drone's are worth?
Price for a unused Matias Quiet Pro?
Price for a unused Matias Quiet Pro?
Probably will sell for around what it cost.
Price for a unused Matias Quiet Pro?
Probably will sell for around what it cost.
So $300?
What do CM Novatouches go for now that they are discontinued? I have one NIB with Russian edition caps laying around in my closet.
Just a quick question, I got one of the Bomb Kings in the last sale (I can't remember the colourway, but it's the dark Grey with Red eyes and the bronzing on the head), and I have just gotten the opportunity to trade it for a V1 Meowcap in Black with Pink.
Am I on point with this trade?
Used Ducky Shine Year of the Snake, ISO layout, browns.
Bought for I think Ł180 in the year of release.
Good condition.
Decided I want something smaller and wondering what I can reasonably recoup for this to fund the new purchase.
Used Ducky Shine Year of the Snake, ISO layout, browns.
Bought for I think Ł180 in the year of release.
Good condition.
Decided I want something smaller and wondering what I can reasonably recoup for this to fund the new purchase.
Any help greatly appreciated, never sold a keyboard before and really don't know how much I should be asking at all (especially since it's limited).
Gonna Hasu my HHKB. What is a controller from a HHKB Pro 1 worth? Will anybody even want it?
Whats my new half shell v2 worth?
Sent from my iPhone using Tapatalk
Gonna Hasu my HHKB. What is a controller from a HHKB Pro 1 worth? Will anybody even want it?
Someone would probably want it, but I have never seen them sold tbh. Personally, i'd hold on to it in case you ever have issues with your hasu controller. Unless of course you arent bothered with down time on the hhkb.
Alpine Winter keyset, with row height defects.
alps? sir, we would like you to leave.
Thank you fine sir.How much is worth a 1992 working IBM Model M p/n 1391404?
$50-60
Considering buying an unused set of Cherry G81-1800 doubleshot keycaps in ANSI, but there's very noticeable and deep scratches on the Caps Lock, spacebar and 2-key. He wants $67. What is it really worth?eh, you could probably get it for ~$45 or so.
What is the Star Cluster BBV2 worth nowadays?
How much is a partially complete Granite R1 set worth?Show Image(http://i.imgur.com/mRjycOR.jpg)
Granite has been rerun a bunch of times but I'm sure you could get a little bit more than what you paid for it.
Granite has been rerun a bunch of times but I'm sure you could get a little bit more than what you paid for it.
Thanks dude, i've put it up for $140
What is the Star Cluster BBV2 worth nowadays?
$250+How much is a partially complete Granite R1 set worth?Show Image(http://i.imgur.com/mRjycOR.jpg)
Aw man really... Seems like I grossly overpaid
Aw man really... Seems like I grossly overpaidWhat is the Star Cluster BBV2 worth nowadays?
$250+
Aw man really... Seems like I grossly overpaidWhat is the Star Cluster BBV2 worth nowadays?
$250+
Well, I put $250+ for a reason. $300 isn't bad but if you paid over $350, you grossly over paid.
Aw man really... Seems like I grossly overpaidWhat is the Star Cluster BBV2 worth nowadays?
$250+
Well, I put $250+ for a reason. $300 isn't bad but if you paid over $350, you grossly over paid.
Hm paid 350 for it :/ guess it's on the high end
Aw man really... Seems like I grossly overpaidWhat is the Star Cluster BBV2 worth nowadays?
$250+
Well, I put $250+ for a reason. $300 isn't bad but if you paid over $350, you grossly over paid.
Hm paid 350 for it :/ guess it's on the high end
I would say that's the higher end.
How much do jellykeys trass & lava and ancient flame go for? I see them up for trades but few accept paypal so hard to find pricing.
How much do jellykeys trass & lava and ancient flame go for? I see them up for trades but few accept paypal so hard to find pricing.
I just bought a trass & lava for $60, but I think that is considered a very good price
Need a price check on a MX Orangesicle Clack Factory Skull
eh, you could probably get it for ~$45 or so.Thank you very much!
How much do jellykeys trass & lava and ancient flame go for? I see them up for trades but few accept paypal so hard to find pricing.
I just bought a trass & lava for $60, but I think that is considered a very good price
I know, I PM'd the guy at the same time as you but he decided to sell to you rather than me :(
Hey could i get a price check on a duck orion v2 with acrylic angled bottom :)
Used Ducky Shine Year of the Snake, ISO layout, browns.
Bought for I think Ł180 in the year of release, so 3 years old-ish.
Good condition, but unfortunately the box and other bits and pieces seem to have got lost in a house move.
Decided I want something smaller and wondering what I can reasonably recoup for this to fund the new purchase.
Show Image(http://i.imgur.com/gST58Ew.png)
Price check on Death Lives gen 2 rev 3. Riptide Rush This one had resin issues leading to front left corner to warp and discolor.
Hey could i get a price check on a duck orion v2 with acrylic angled bottom :)
I'd say around $700 is the going rate these days.
Hey could i get a price check on a duck orion v2 with acrylic angled bottom :)
I'd say around $700 is the going rate these days.
Awesome thanks a lot what about one with an aluminium bottom?
Full set of vintage mx caps (with Hebrew as secondary) and a board with Mitsumi switches, how much are they worth?
Images: http://imgur.com/a/p2DZC
Full set of vintage mx caps (with Hebrew as secondary) and a board with Mitsumi switches, how much are they worth?
Images: http://imgur.com/a/p2DZC
Eh, like $15 maybe. Caps are in mediocre condition with a bigass enter and 1u backspace, very yellowed case, not really in-demand switches, unknown brand.
Even if you cleaned and Retr0brited them, they're still thin, pad printed ABS caps that aren't worth all that muchFull set of vintage mx caps (with Hebrew as secondary) and a board with Mitsumi switches, how much are they worth?
Images: http://imgur.com/a/p2DZC
Eh, like $15 maybe. Caps are in mediocre condition with a bigass enter and 1u backspace, very yellowed case, not really in-demand switches, unknown brand.
What if I cleaned the caps? Are they worth anything? How can I know what they're made of?
I know the case is worthless.
I have a couple IBM M keyboards that I should probably sell or trade and I was wondering what they are worth and this seems like an appropriate place to ask:
IBM Model M - SSK
Part No : 1397681
Date : 12-04-92
IBM Model M
Part No : 1391401
Date : 25 AUG 89
Both have the original coiled PS/2 cord and all keys work (tested in Win10 w/ USB to PS/2 adapter)
Price check on an original das keyboard (MX blues) with yellow doubleshot caps? Someone local is offering it to me in a trade and I have no idea if it's worth it as i'd just get it to sell it on here.
Price check on an original das keyboard (MX blues) with yellow doubleshot caps? Someone local is offering it to me in a trade and I have no idea if it's worth it as i'd just get it to sell it on here.
Very low supply, very low demand. Non-original caps are not ideal though, since most people buying an original das want it for collecting.
Also, if it has MX blues it's not an original das. The Das II was the first with mechanical switches.
Hello!
I'm a newbie, that bought 2 IBM Model F XTs.
So, I want to know are those prices reasonable for them in their condition.
First:
http://www.ebay.com/itm/VINTAGE-IBM-5150-CLICKY-MECHANICAL-KEYBOARD-83-KEY-/282375810999?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=T9UBq0tf%252F2N43jpFJeO4Jy8C9PY%253D&orig_cvip=true&rt=nc
"Pulled from a working 5150 IBM computer."
Price: 75$ + 10$ ship.
Second:
http://www.ebay.com/itm/381952449387?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
"in good condition, no chips, cracks, breaks or damage, few light scratches/scuffs, marks/markings. Collar around the cable has detached. Keyboard has not been tested, working condition is unknown and is being sold for parts or repair."
Price: 74.88$ + 8.57$ ship.
It seems that the first F is in working condition, but the second is untested, but according to the photos it looks like unused (This is why I bought it =)
Do I have high chance that the second is in working condition?
Hello!
I'm a newbie, that bought 2 IBM Model F XTs.
So, I want to know are those prices reasonable for them in their condition.
First:
http://www.ebay.com/itm/VINTAGE-IBM-5150-CLICKY-MECHANICAL-KEYBOARD-83-KEY-/282375810999?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=T9UBq0tf%252F2N43jpFJeO4Jy8C9PY%253D&orig_cvip=true&rt=nc
"Pulled from a working 5150 IBM computer."
Price: 75$ + 10$ ship.
Second:
http://www.ebay.com/itm/381952449387?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
"in good condition, no chips, cracks, breaks or damage, few light scratches/scuffs, marks/markings. Collar around the cable has detached. Keyboard has not been tested, working condition is unknown and is being sold for parts or repair."
Price: 74.88$ + 8.57$ ship.
It seems that the first F is in working condition, but the second is untested, but according to the photos it looks like unused (This is why I bought it =)
Do I have high chance that the second is in working condition?
I mean the second board looks good but you will need converters to get it to run on most computers now.
you paid too much
Rare switches and rare caps, looks like the legit thing. :]
The caps alone are worth a fortune, take Tactical's suggestion, the deskthority community goes wild for vintage boards, you could get a price estimate on there or even a buyer.
Rare switches and rare caps, looks like the legit thing. :]
The caps alone are worth a fortune, take Tactical's suggestion, the deskthority community goes wild for vintage boards, you could get a price estimate on there or even a buyer.
Wait, what's so rare about MY switches?
ohhh thank you very much
but i have an other one just it is not blue , it is triumh adler too, but I could not find such a thing on internet
a little different than the blue
ohhh thank you very much
but i have an other one just it is not blue , it is triumh adler too, but I could not find such a thing on internet
a little different than the blue
Sadly, I need to downsize my massive collection of keyboards, but I have no idea how to price
- WhiteFox, "the true fox" edition... Gateron Browns (with original box) $150
- KeyTrak Blue Alps (95 key) with double-shot keycaps (with original box, amazingly, but trackball doesn't work.. otherwise immaculate).. not sure yet if I can part with this one :-X $120-240, depending on the switch condition
- Bolt-modded IBM Model M 1391401, 04-04-90 (grey label) $80-100
- RF 87U 55g, black case + white/grey keycaps (with original box) $150, maybe a bit more
- Razer Blackwidow Ultimate 2012 (MX Blue, backlit) (with original box) $50?
- NMB HiTek Space Invaders (clicky) $50-75
- Dolch G80-1800, MX Blue (original switches, G80 black case) with converters $150-200, closer to the lower figure, I think
Let me take a shot. This is by all means not definitive.Sadly, I need to downsize my massive collection of keyboards, but I have no idea how to price
- WhiteFox, "the true fox" edition... Gateron Browns (with original box) $150
- KeyTrak Blue Alps (95 key) with double-shot keycaps (with original box, amazingly, but trackball doesn't work.. otherwise immaculate).. not sure yet if I can part with this one :-X $120-240, depending on the switch condition
- Bolt-modded IBM Model M 1391401, 04-04-90 (grey label) $80-100
- RF 87U 55g, black case + white/grey keycaps (with original box) $150, maybe a bit more
- Razer Blackwidow Ultimate 2012 (MX Blue, backlit) (with original box) $50?
- NMB HiTek Space Invaders (clicky) $50-75
- Dolch G80-1800, MX Blue (original switches, G80 black case) with converters $150-200, closer to the lower figure, I think
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
Just want to point out that if you want to sell on Geekhack, you can't ask for offers, you must have a listed price.
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
Just want to point out that if you want to sell on Geekhack, you can't ask for offers, you must have a listed price.
Same with mechmarket.
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
Just want to point out that if you want to sell on Geekhack, you can't ask for offers, you must have a listed price.
Same with mechmarket.
Both of them have the rule,
"Trade-only threads/items do not require an explicit listed price."
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
Just want to point out that if you want to sell on Geekhack, you can't ask for offers, you must have a listed price.
Same with mechmarket.
Both of them have the rule,
"Trade-only threads/items do not require an explicit listed price."
That's correct, but you said a sale thread and I just wanted to clarify. In-context, everything's absolutely fine, I just wanted to clarify for the benefit of anyone skimming the thread at a later date. Sorry for any misunderstanding!
Price check on an Interstellar Pink Stump V1?
Still available?
Price check on an Interstellar Pink Stump V1?Still available?
One sold on ebay recently for about $100
Price check on an Interstellar Pink Stump V1?Still available?
One sold on ebay recently for about $100
That was a Celestial Pink V1
Having a clear out of my office the other day, and came across my Silver 60% Hammer aluminium case still in the packaging. What price would it fetch if I put it in the classifieds?I bought one for 190$ shipped on January 5th, I am not sure how much more you can get (I think that may be the original price)
TIA
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
Minus fees. Don't forget eBay takes a good chunk.
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
Minus fees. Don't forget eBay takes a good chunk.
Thanks, I'll keep an eye on that. I was more interested in the gold BBv2. Anyone have more information on it? How many were made, etc. Been searching but cant find much.
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
Minus fees. Don't forget eBay takes a good chunk.
Thanks, I'll keep an eye on that. I was more interested in the gold BBv2. Anyone have more information on it? How many were made, etc. Been searching but cant find much.
Check The Athaneum in Bro Artisan Forum
pc for a shimmery blue clack topre, also a electric marmalade fugu and watermelon fugu
pc on these BBv2s pls. Gold (Metal), Toxic Ooze, THC. Thanks :)There is a THC on ebay ending in a couple of days. That should give you an accurate price.Show Image(https://i.imgur.com/p6jN1HT.jpg)
Minus fees. Don't forget eBay takes a good chunk.
Thanks, I'll keep an eye on that. I was more interested in the gold BBv2. Anyone have more information on it? How many were made, etc. Been searching but cant find much.
Check The Athaneum in Bro Artisan Forum
Thanks, I found the original sale thread https://geekhack.org/index.php?topic=50942.0 (https://geekhack.org/index.php?topic=50942.0). Seems 25 were made. At least 16 were mx. Anyone have an idea what a gold mx one would be worth today?
Having a clear out of my office the other day, and came across my Silver 60% Hammer aluminium case still in the packaging. What price would it fetch if I put it in the classifieds?I bought one for 190$ shipped on January 5th, I am not sure how much more you can get (I think that may be the original price)
TIA
What are these worth? The last two of my BBv2 I'm letting go. Only keeping my steel one. I'm essentially out of the keyboard hobby. Toxic Ooze (I think) and an MX gold ($125 originally).
https://geekhack.org/index.php?topic=50942.0Show Image(http://i.imgur.com/gkyMebz.jpg)Show Image(http://i.imgur.com/CtnXN0r.jpg)
What are these worth? The last two of my BBv2 I'm letting go. Only keeping my steel one. I'm essentially out of the keyboard hobby. Toxic Ooze (I think) and an MX gold ($125 originally).
https://geekhack.org/index.php?topic=50942.0Show Image(http://i.imgur.com/gkyMebz.jpg)Show Image(http://i.imgur.com/CtnXN0r.jpg)
Toxic Ooze could probably grab $150-200 to the right person and the Gold should easily get $500+
Thanks for the info. I was just about to ask about this cap.What are these worth? The last two of my BBv2 I'm letting go. Only keeping my steel one. I'm essentially out of the keyboard hobby. Toxic Ooze (I think) and an MX gold ($125 originally).
https://geekhack.org/index.php?topic=50942.0Show Image(http://i.imgur.com/gkyMebz.jpg)Show Image(http://i.imgur.com/CtnXN0r.jpg)
Toxic Ooze could probably grab $150-200 to the right person and the Gold should easily get $500+
I've personally never seen the Gold get that much, but there's a good chance I've missed some public sales of it or that you have info about private ones. Even though the Gold was $125 on sale, it was made-to-order so there were quite a few more made than with other earlier colorways.
What would you guys value the Kindred cap I won from JellyKey at?
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Afaik there were only 5 of these ever made & I am the only person outside of Joiha that has one. I have to be clear about this here, I am interested in a valuation of this cap because I'm thinking of possibly putting it up for trade. If I do go through with it, it will be only for trade as the guys at Johia asked that I do not resell the cap & I would like to respect their wishes.
It honestly has me torn because it is pretty awesome being the owner of such a rare cap, but the cap has just sat inside of it's container since I got it for the most part. I'm thinking I would rather trade it someone who would actually use the cap on one of their KBs for something I've been looking for, rather than just keep it hidden here with me. I'm still fairly new to the mech KB scene & have become much more interested in making & collecting custom KBs than artisan caps, so I figured I may be able to find a trade that would be worthwhile to me for it. Although before I go posting this for trade I would like to get a decent ideal of what the community values such a cap at. Thanks ahead of time for the input guys! :thumb:
One offs are impossible to price, as there is no precedent for them. Even from vendors that have multiple one offs like Jelly, not all of them have gone up for sale and not all of them are desired the same.
I would just put up a sale thread, set an end time, and say that any offers for it must also show the keeb it would be used on. If someone can't convince you they truly love the cap, you don't have to sell to them.
Noxious v2 is $250-300.
PC on mx scotopic clack skull?
I traded up like 4 times to eventually get my end game sculpt which is a Otter. Now that I just won one, I'm only interested in keeping one. The one I'm thinking of getting rid of is a King Midas Otter. Anyone got a PC on that?
Sent from my SM-N920P using Tapatalk
That would be really unfortunate if I traded 200+ worth of caps for something that's worth only 70 huh?I traded up like 4 times to eventually get my end game sculpt which is a Otter. Now that I just won one, I'm only interested in keeping one. The one I'm thinking of getting rid of is a King Midas Otter. Anyone got a PC on that?
Sent from my SM-N920P using Tapatalk
$70
That would be really unfortunate if I traded 200+ worth of caps for something that's worth only 70 huh?I traded up like 4 times to eventually get my end game sculpt which is a Otter. Now that I just won one, I'm only interested in keeping one. The one I'm thinking of getting rid of is a King Midas Otter. Anyone got a PC on that?
Sent from my SM-N920P using Tapatalk
$70
Sent from my SM-N920P using Tapatalk
So i will probably try to trade it for something like a keyset and sell that then instead to recoup.. Thanks.That would be really unfortunate if I traded 200+ worth of caps for something that's worth only 70 huh?I traded up like 4 times to eventually get my end game sculpt which is a Otter. Now that I just won one, I'm only interested in keeping one. The one I'm thinking of getting rid of is a King Midas Otter. Anyone got a PC on that?
Sent from my SM-N920P using Tapatalk
$70
Sent from my SM-N920P using Tapatalk
Binge likes his caps sold at what they originally cost in the sale, so I gave you that price. If you want to recoup cost, sell it for what you need to break even.
*NIB* HP C1405B membrane keyboard - very beautiful with red / green legends and interesting cap shapes but rather mushy keyfeel.
Thanks!
(Attachment Link)
(Attachment Link)
if the caps are compatible with something good, then $50-75
if not, like $20
What is a G80-1501 HAD and G80-3001 HAD worth? (with the doubleshot keycaps - both mint condition)
(Attachment Link)
Topre ML0100 IBM Model M layout variforce?
I heard it was from 2003 and quite rare being the first series ever made by topre
(Attachment Link)
Topre ML0100 IBM Model M layout variforce?
I heard it was from 2003 and quite rare being the first series ever made by topre
Hard pink Topre: Awesome.(Attachment Link)
Topre ML0100 IBM Model M layout variforce?
I heard it was from 2003 and quite rare being the first series ever made by topre
Dude, you gotta fix your monitor or camera. Like,
c'mon.
I bought a dead CM Storm Novatouch TKL with Topre switches from another geekhack member. I believe the microcontroller or another chip is defective. I've tested the basic stuff: no broken wires, voltage all across the board, no loose components or dried soldering. I've tried starting it in BSL mode, but no luck there. I've tried connecting it to my Linux Mint desktop and Windows laptop, both through a hub and directly. The device simply does not show up. The microcontroller heats up though. TL;DR not a trivial problem. It has original caps on it.
I would like to try to rewire the keys using a Teensy, however, before I attempt this, I'd also like to know what I could get for the keyboard if it were functional AND programmable. There is quite some information available on this keyboard: http://vekkt0r.github.io/articles/novatouch-tkl-reverse-engineering-part-1/ Writing or modifying software shouldn't be an issue since I'm quite familiar with programming.
So my questions are:
- How much could I still get for the keyboard in this state?
- How much could I get for it if it were functional and programmable?
Thank you in advance!
I bought a dead CM Storm Novatouch TKL with Topre switches from another geekhack member. I believe the microcontroller or another chip is defective. I've tested the basic stuff: no broken wires, voltage all across the board, no loose components or dried soldering. I've tried starting it in BSL mode, but no luck there. I've tried connecting it to my Linux Mint desktop and Windows laptop, both through a hub and directly. The device simply does not show up. The microcontroller heats up though. TL;DR not a trivial problem. It has original caps on it.
I would like to try to rewire the keys using a Teensy, however, before I attempt this, I'd also like to know what I could get for the keyboard if it were functional AND programmable. There is quite some information available on this keyboard: http://vekkt0r.github.io/articles/novatouch-tkl-reverse-engineering-part-1/ Writing or modifying software shouldn't be an issue since I'm quite familiar with programming.
So my questions are:
- How much could I still get for the keyboard in this state?
- How much could I get for it if it were functional and programmable?
Thank you in advance!
If you do this do it for the fun and experience, don't expect to make any money. You're not going to be able to get more than retail price and will spend a ton of time on it.
The value of it as-is will be just about 30% less than the price of selling the switches in it on their own, desoldered. Shipping cost eats into this greatly, especially being a TKL and thus fewer switches.
Programming the teensy won't be your issue, getting the wiring working will be. You'll need to figure out how the PCB routes the rows and col and then figure out a way to intercept these paths to wire to your teensy instead. Fun as a project, but it'll be a lot of work. There's also no guarantee it will work. If this fails the only way to get it working will be to desolder the PCB and either put your own on or handwire it. Extensive use of a multimeter to verify the integrity of the PCB is going to be required.
In terms of creating a working board, you'll find it more time efficient to mow lawns, buy a plate, switches, PCB and case and build one from scratch.
Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
Price check on slightly used blue lettered Realforce 104 set they used to sell on EK years ago. Are people still looking for these?At least $100 maybe more, topre sets are hard to come by.
Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
I believe there is only one or two of them.
Just the Skullthulus though as they're usually the pretty limited right?Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
I believe there is only one or two of them.
Just the Skullthulus though as they're usually the pretty limited right?Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
I believe there is only one or two of them.
Cool, didn't know that colorway was that rare.Just the Skullthulus though as they're usually the pretty limited right?Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
I believe there is only one or two of them.
All caps in that colorway are 1 or 2 of IIRC
Cool, didn't know that colorway was that rare.Just the Skullthulus though as they're usually the pretty limited right?Duck Pie Skullthulu anyone? I like the color, but do I have <0% chance of hunting one down?
I believe there is only one or two of them.
All caps in that colorway are 1 or 2 of IIRC
Realforce YF110S domeswapped with U55G, like new
Bro Power core FPS gamer set? Anyone know how much I should expect to pay for this? Just the 6 keys, WASD, Fn & Esc
Bro Power core FPS gamer set? Anyone know how much I should expect to pay for this? Just the 6 keys, WASD, Fn & Esc
It was $125 from the sale and that is including the Power Core Bot. Don't know aftermarket pricing though
Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
I got burned in his Miami Nights GB + CMYK v2 too. :(Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
NOTHING.
HIS NAME MEANS NOTHING.
Ivan's Round 3 Black on Black Dyesub?GB price was 75$, so I think it's worth 90-100$.Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Depends on buyers opinion of Ivan, I'd say.
Some would say nothing, but I paid $75 and shipping for a similar set recently. Given that IMSTO is better than Gateron, I'd say $80-90 is fair.
Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Depends on buyers opinion of Ivan, I'd say.
Some would say nothing, but I paid $75 and shipping for a similar set recently. Given that IMSTO is better than Gateron, I'd say $80-90 is fair.
imsto uses Gateron caps now.
Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Depends on buyers opinion of Ivan, I'd say.
Some would say nothing, but I paid $75 and shipping for a similar set recently. Given that IMSTO is better than Gateron, I'd say $80-90 is fair.
imsto uses Gateron caps now.
I don't think he did for Ivan R3.
I thought R3 was the first set he used Gateron on?Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Depends on buyers opinion of Ivan, I'd say.
Some would say nothing, but I paid $75 and shipping for a similar set recently. Given that IMSTO is better than Gateron, I'd say $80-90 is fair.
imsto uses Gateron caps now.
I don't think he did for Ivan R3.
R3 caps came from plum IIRC. But I also seem to recall something about plum caps being the same as gateron.
I know the caps in question are scoop+bar homing, if that helps narrow it down. Don't know of many manufacturers that make that style of homing key.
Oh I know but the wait time would be immense. I will be in the Dark Wave GB for sure regardless.
Ivan is using a different manufacturer for the new round (Gateron) and he said he expects the turnaround time to be much shorter.
It's the same manufacturer actually... just now dealing with them directly instead of through a 'wholesaler' middle company which caused all the dumb delays on this one.
I have AVAILABLE:
3x sets of blanks
That's some excellent detective work. I think I'll go for $80 + shipping then.I thought R3 was the first set he used Gateron on?Ivan's Round 3 Black on Black Dyesub?Show Image(http://i.imgur.com/zAT1jJm.jpg)Show Image(http://i.imgur.com/SMEG25t.jpg)
Depends on buyers opinion of Ivan, I'd say.
Some would say nothing, but I paid $75 and shipping for a similar set recently. Given that IMSTO is better than Gateron, I'd say $80-90 is fair.
imsto uses Gateron caps now.
I don't think he did for Ivan R3.
R3 caps came from plum IIRC. But I also seem to recall something about plum caps being the same as gateron.
I know the caps in question are scoop+bar homing, if that helps narrow it down. Don't know of many manufacturers that make that style of homing key.
Edit:Did some digging and found this (Ignore dates as the thread is locked and I had to put together the quotes)Oh I know but the wait time would be immense. I will be in the Dark Wave GB for sure regardless.
Ivan is using a different manufacturer for the new round (Gateron) and he said he expects the turnaround time to be much shorter.It's the same manufacturer actually... just now dealing with them directly instead of through a 'wholesaler' middle company which caused all the dumb delays on this one.
I have AVAILABLE:
3x sets of blanks
So Plum was a wholesaler of Gateron.
From the sticker:
brand: AUVA
FCC ID: HWI-A2-KB21012 (manufacturer is A2 Technology Co., Ltd.)
made in Thailand
Case features tiles between inverted-T arrow cluster and navigation sixkey, just like Chicony KB-5191, but the sides aren't protruded. There's an AT-XT switch under one foot; feet aren't rubberized. The case is held together by three screws on the bottom. Four green indicator diodes are above the tenkey, surrounded by a dark-grey black-framed sticker with two-line labels.
There's no plate. Genuine (vintage) Cherry MX Blue switches are PCB-mounted, and so are Cherry stabilizers. Big-ass/AT Enter is stabilized using one horizontal stab (2x) and an extra stem on the top.
1x keycaps are doubleshot, the rest is printed. Profile is OEM (with number-row profile on the function row), thin/medium thickness ABS.
At last but not least, the PCB is among the cleanest I've ever seen, along with outstanding soldering quality.
Ahoi there,Sounds like classic Cherry. Are the stabilizers screw-in?
looking to sell this as it is rather disgustingly yellow and reeks of smoke, even though it is the only vintage blues board I have and I would love to keep one around, but it is only really good for the switches. Caps are ABS, partly double-shot but have also turned disgustingly yellow so not really worth much, I suppose. Really it probably boils down to what the 102 vintage blues are worth...
All keys, caps, LEDs, feet and the cable are fully intact, it is a joy to type on, except for having smelly fingers afterward.
Here's how someone else described this board:QuoteFrom the sticker:
brand: AUVA
FCC ID: HWI-A2-KB21012 (manufacturer is A2 Technology Co., Ltd.)
made in Thailand
Case features tiles between inverted-T arrow cluster and navigation sixkey, just like Chicony KB-5191, but the sides aren't protruded. There's an AT-XT switch under one foot; feet aren't rubberized. The case is held together by three screws on the bottom. Four green indicator diodes are above the tenkey, surrounded by a dark-grey black-framed sticker with two-line labels.
There's no plate. Genuine (vintage) Cherry MX Blue switches are PCB-mounted, and so are Cherry stabilizers. Big-ass/AT Enter is stabilized using one horizontal stab (2x) and an extra stem on the top.
1x keycaps are doubleshot, the rest is printed. Profile is OEM (with number-row profile on the function row), thin/medium thickness ABS.
At last but not least, the PCB is among the cleanest I've ever seen, along with outstanding soldering quality.
The layout is 102-key ISO-DE w/ big-ass/AT Enter and 1x Backspace.
(Attachment Link)
Thanks for any pointers!
New DSA Hana base kit?
Filco Majestouch 2 104 w/ browns. Keys are worn out so they will need new keycaps.
Topre yellow/orange blank keycap sets?
Booper Lv426 Kosmo in topre? Any idea on a price? Think I could trade it for a keywok?Someone tried selling it at 500 and no bit it seems. Might have a hard time trading it since people tend to want other Booper stuff for Keywoks plus it being topre.
Are the stabilizers screw-in?
I wouldn't sell my pink one with legends for under $250, and I don't even have the numpad to go with it.
So at least $250.
Topre yellow/orange blank keycap sets?
356.2??
(Attachment Link)
Topre ML0100 IBM Model M layout variforce?
I heard it was from 2003 and quite rare being the first series ever made by topre
I think it's worth ~$95 and the left shift looks a little crooked.
Vintage Black from 1982-1988 WYSE keyboard? What 's it worth?
Vintage Black from 1982-1988 WYSE keyboard? What 's it worth?
A lot are selling for $0.50/ea, so thereabouts.
Vintage Black from 1982-1988 WYSE keyboard? What 's it worth?
A lot are selling for $0.50/ea, so thereabouts.
They used to sell for ~$0.35/switch but I haven't followed pricing recently.
LZ-CE with ergo clears and a red caseI bought red CE recently as kit - case, pcb and plate for $400
OTD red alert
CMYK GMK from dubsgalore's group buy
Anyone know what this stuff is worth?
Built cherry 1800 with leeku pcb/plate, lubed gateron blacks and cherry dyesubs (no yellowing)
Built cherry 1800 with leeku pcb/plate, lubed gateron blacks and cherry dyesubs (no yellowing)
OG Cherry dye-subs? It's fit 1800 layout? Can you share some pics?
Spirit Red and Aztec Gold?
Damn that's the one that I wanted to know about the most. Got any backround on it?Spirit Red and Aztec Gold?
Couldn't really give you a price for Aztec Gold as I haven't seen one ever being traded or sold. Spirit Red I would say $200
Damn that's the one that I wanted to know about the most. Got any backround on it?Spirit Red and Aztec Gold?
Couldn't really give you a price for Aztec Gold as I haven't seen one ever being traded or sold. Spirit Red I would say $200
Built cherry 1800 with leeku pcb/plate, lubed gateron blacks and cherry dyesubs (no yellowing)
OG Cherry dye-subs? It's fit 1800 layout? Can you share some pics?
I meant doubleshots, sorry for the scare.
Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
Hello everyone. Kinda new here. Well, really new actually. I have a Olivetti Keyboard and would like to know how much they would go for? It is a olivetti KBD2812. If anyone has an informatin that would be really helpful as I am looking to sell it.
Hello, I'd like to know what my Ducky Shine 5 YOTG Cherry mx Blues would sell for. It's practically new and barely used.
Hello, I'd like to know what my Ducky Shine 5 YOTG Cherry mx Blues would sell for. It's practically new and barely used.
Hello everyone. Kinda new here. Well, really new actually. I have a Olivetti Keyboard and would like to know how much they would go for? It is a olivetti KBD2812. If anyone has an informatin that would be really helpful as I am looking to sell it.
https://i.redd.it/yhwpkexl7wpy.jpgDepends on the keycaps. MY-switch boards are basically worthless to most people around here even in a 1800 layout.
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.
https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.
Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
The keycaps look lasered so unless someone specifically needs some to complete a layout they aren't valued much either.
Same goes for the blue switches as being in a POS board they are probably worn out.
I can't really give a value as I'm not sure anyone would want any of it.
Depending on condition and type you might get a few dollars for cables and/or stabilizers.
And those rectangle relegendable caps might interest some people.
I already wondered why my answer looked familiar. :))https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
The keycaps look lasered so unless someone specifically needs some to complete a layout they aren't valued much either.
Same goes for the blue switches as being in a POS board they are probably worn out.
I can't really give a value as I'm not sure anyone would want any of it.
Depending on condition and type you might get a few dollars for cables and/or stabilizers.
And those rectangle relegendable caps might interest some people.
:confused:
I already wondered why my answer looked familiar. :))https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
The keycaps look lasered so unless someone specifically needs some to complete a layout they aren't valued much either.
Same goes for the blue switches as being in a POS board they are probably worn out.
I can't really give a value as I'm not sure anyone would want any of it.
Depending on condition and type you might get a few dollars for cables and/or stabilizers.
And those rectangle relegendable caps might interest some people.
:confused:
Reddit seems to be a bit more positive than we are.I already wondered why my answer looked familiar. :))https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
The keycaps look lasered so unless someone specifically needs some to complete a layout they aren't valued much either.
Same goes for the blue switches as being in a POS board they are probably worn out.
I can't really give a value as I'm not sure anyone would want any of it.
Depending on condition and type you might get a few dollars for cables and/or stabilizers.
And those rectangle relegendable caps might interest some people.
:confused:
It is also discussed here https://www.reddit.com/r/MechanicalKeyboards/comments/63ro53/small_vintage_cherry_mx_family/ in case anyone was wondering
I already wondered why my answer looked familiar. :))https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
How much worth are the buttom 2 keyboards. They are Cherry MY 7000.Hi!Cherry MY aren't really worth anything.
Found these keyboards (my pic) https://i.redd.it/yhwpkexl7wpy.jpg (https://i.redd.it/yhwpkexl7wpy.jpg)
the top 2 are with cherry mx blues (vintage) and they are dissembled and how worth they are? They are around 220 switches.
The button 2 are cherry my 7000. Yes, 1 key is missing... :/
So how worth they are?
The keycaps look lasered so unless someone specifically needs some to complete a layout they aren't valued much either.
Same goes for the blue switches as being in a POS board they are probably worn out.
I can't really give a value as I'm not sure anyone would want any of it.
Depending on condition and type you might get a few dollars for cables and/or stabilizers.
And those rectangle relegendable caps might interest some people.
:confused:
It is also discussed here https://www.reddit.com/r/MechanicalKeyboards/comments/63ro53/small_vintage_cherry_mx_family/ in case anyone was wondering
Could I sell those both MY keyboards for 20$??
Could I sell those both MY keyboards for 20$??
I'm not sure why anyone would want them to be honest.
You could certainly list them for sale on r/mechmarket and see if anyone wants them.
To sell things here you'll have to be a member for 2 months and have 25 posts in qualifying subforums.
Hi guys, just wondering how much a frozen froge ribbit is worth compared to a kk v1 watermelon keycap. Thanks!
Hi guys, just wondering how much a frozen froge ribbit is worth compared to a kk v1 watermelon keycap. Thanks!
You could easily trade a frozen froge ribbit for a kk v1 watermelon keycap but not the other way around. The ribbit is worth more to a lot more people.
Hi guys, just wondering how much a frozen froge ribbit is worth compared to a kk v1 watermelon keycap. Thanks!
You could easily trade a frozen froge ribbit for a kk v1 watermelon keycap but not the other way around. The ribbit is worth more to a lot more people.
Would you say that the ribbit is worth more than a bbv2 in the same colorway?
Snagged a Model F XT in pretty much perfect condition with its original box, foam inserts, etc. Looks as if it's never been used. Any ideas?Sell to me? :D
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
I'll give you 25 Schmeckles for that baby
Need a little more than that. :PVery very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
The current offer on the table is $2.5k. I can't afford it, but am looking for someone who can.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.Show Image(http://www.reactiongifs.com/wp-content/uploads/2012/11/JmBkN.gif)
His much is a corsair strafe worth with no switches?
meh.. it's a pity to program, and poorly implemented. Just old.
Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.
meh.. it's a pity to program, and poorly implemented. Just old.
Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.
Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?
Your salt only makes my penis harder
meh.. it's a pity to program, and poorly implemented. Just old.
Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.
Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?
Fake Koalas
I am saying that the price to what you get isn't worth it at all. The 356 mini is nice and all, but you're really going to pay an extra at least $2000 for a color variant?
Even the 'cheap' ones are priced way too high. You're getting a case which isn't modular, so you're stuck with how it's built. Uses detachable ps2? what is this 1990?
Needs an external programmer, and until recently, there were no English guides on how to program it...
I would go after a Duck Poker Case and use a Bface PCB and whatever plate you want. That would be way more worth your time and still extremely awesome.
456Gt... you were considering 'fixing' up one, no one would buy that from you even if it was fixed since you'd have to have it milled back down or just spend way too much to get it to new quality. you could get an undamaged one for less.
Even if you got an undamaged one, it's still too high of an angle, and has all the other programming issues of the mini. Another thing for doom2, if you can afford the 356mini, you might as well design your own board if you've got the skills.
Mod Edit: Keep the personal attacks and slander off the forum.
User has been issued a warning for this.
meh.. it's a pity to program, and poorly implemented. Just old.
Unfortunately, most 60% cases are extremely ugly, but this still isn't worth the price at all.
Still no clue what your taste is in keyboard design. 356mini isn't that good.... 456gt isn't that good... Most 60% are ugly.... So, what is a 'good' keyboard to you?
Fake Koalas
I am saying that the price to what you get isn't worth it at all. The 356 mini is nice and all, but you're really going to pay an extra at least $2000 for a color variant?
Even the 'cheap' ones are priced way too high. You're getting a case which isn't modular, so you're stuck with how it's built. Uses detachable ps2? what is this 1990?
Needs an external programmer, and until recently, there were no English guides on how to program it...
I would go after a Duck Poker Case and use a Bface PCB and whatever plate you want. That would be way more worth your time and still extremely awesome.
456Gt... you were considering 'fixing' up one, no one would buy that from you even if it was fixed since you'd have to have it milled back down or just spend way too much to get it to new quality. you could get an undamaged one for less.
Even if you got an undamaged one, it's still too high of an angle, and has all the other programming issues of the mini. Another thing for doom2, if you can afford the 356mini, you might as well design your own board if you've got the skills.
Mod Edit: Keep the personal attacks and slander off the forum.
User has been issued a warning for this.
Nothing to do with me but then again you never miss an opportunity to use my name
Sent from my iPhone using Tapatalk
Someone in your slack had showed me screenshots of it being discussed, you included in that discussion.. then again CTRL ALT never miss an opportunity to beat a dead horse
Sent from my Salt Mine using Tapatalk
your LZ circle Jerk 75% weeb editionm8 he wasn't even in that gb
your LZ circle Jerk 75% weeb editionm8 he wasn't even in that gb
Came here to post this toochange ur avatar and price all my stuff for me
Came here to post this toochange ur avatar and price all my stuff for me
我不想你是個小男孩
哈哈哈哈哈哈Let's keep this on topic
Ducky DK9008 Shine 3 MX Brown (2.5 yrs)
Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.
Would be quite little maybe less than you would get desoldering the switches $50 or soDucky DK9008 Shine 3 MX Brown (2.5 yrs)
Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.
No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."
I'm still interested in opinions about a fair asking price for this keyboard.
I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.
Would be quite little maybe less than you would get desoldering the switches $50 or soDucky DK9008 Shine 3 MX Brown (2.5 yrs)
Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.
No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."
I'm still interested in opinions about a fair asking price for this keyboard.
I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.
eBay you should find some MX clear.options.i would consider Leopold and filco as well
Wasd is a bit taller but ducky and filco seem very similar and it's not worth novatouching Leopold is best stock just opening changed it irreversibly as the case never fits the same when you close it. I'd say a filco is your best bet if you want an amazing oem MX clear boardWould be quite little maybe less than you would get desoldering the switches $50 or soDucky DK9008 Shine 3 MX Brown (2.5 yrs)
Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.
No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."
I'm still interested in opinions about a fair asking price for this keyboard.
I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.
eBay you should find some MX clear.options.i would consider Leopold and filco as well
I've never touched a soldering gun, so I fear I'd damage something.
Had a WASD MX Clear keyboard briefly. It was functionally perfect, but the horizontal seam in the case drove me nuts for aesthetic reasons. I'm considering the Leopold FC980C (topre switches), but I'd like to be able to use my og Cherry double shot keycaps. A Novatouch I tried out felt pretty good, so I imagine that Leopold would be fine, too. I need something with a numpad, so that eliminates most current MX Clear boards.
I didn't think Leopold or Filco made MX clear boards?Wasd is a bit taller but ducky and filco seem very similar and it's not worth novatouching Leopold is best stock just opening changed it irreversibly as the case never fits the same when you close it. I'd say a filco is your best bet if you want an amazing oem MX clear boardWould be quite little maybe less than you would get desoldering the switches $50 or soDucky DK9008 Shine 3 MX Brown (2.5 yrs)
Everything worked fine until I carelessly tried to plug in the mini-USB cable when it was upside down, which pushed the jack into the case.
No one answered, so I had to (ugh) take it apart until I could see if the internal disconnect was serious or easily fixed. The USB "socket" (or whatever the correct term is for the female end) was held in place by 4 tiny posts, one of which had snapped off. It's now back in place (3 posts + 2 strips of scotch tape). The keyboard works again, and the USB port doesn't appear to move when I connect/disconnect the cable multiple times, but I don't have a lot of confidence in the permanence of this "fix."
I'm still interested in opinions about a fair asking price for this keyboard.
I'd very much like to switch to an MX Clear board. Btw, is it impossible to get a Ducky with MX Clear switches now? I've seen a few in the past, but nothing in the last half year to year.
eBay you should find some MX clear.options.i would consider Leopold and filco as well
I've never touched a soldering gun, so I fear I'd damage something.
Had a WASD MX Clear keyboard briefly. It was functionally perfect, but the horizontal seam in the case drove me nuts for aesthetic reasons. I'm considering the Leopold FC980C (topre switches), but I'd like to be able to use my og Cherry double shot keycaps. A Novatouch I tried out felt pretty good, so I imagine that Leopold would be fine, too. I need something with a numpad, so that eliminates most current MX Clear boards.
Sent from my Pixel XL using Tapatalk
I didn't think Leopold or Filco made MX clear boards?
What's a good price on an LZ-S?$600-700 the $500 one I believe was mostly the cost of fixing it
If I recall, less than 30 of these were made. The only price I could find was the sky blue one that cost the owner ~$500 a few years ago.
Note: I don't own the board, someone is offering to sell it to me. Learned my lesson last time with the OTD post.
So, you? :-P I did pm MrBoonVn.What's a good price on an LZ-S?
If I recall, less than 30 of these were made. The only price I could find was the sky blue one that cost the owner ~$500 a few years ago.
Note: I don't own the board, someone is offering to sell it to me. Learned my lesson last time with the OTD post.
you're asking about a lot of rare stuff here. Not the best place to ask tbh... best bet is to pm some big collectors.
Binge Safety Beast Switch Doctor?
Thanks :)Binge Safety Beast Switch Doctor?
It was $55 in the sale I believe.
Hi guys,
Im new here and im trying to figure out how much does OTD Red Alert + 2 modifiers worth (With out the top 2 rows)?
Thanks guys.
This switch doctorShow Image(http://i.imgur.com/PQCwfGM.jpg)
How much is a binge green slofi worth?Show Image(http://i.imgur.com/P5jGML5.jpg)
*right most cap* pulled a random picture off internet.
How much is a binge green slofi worth?Show Image(http://i.imgur.com/P5jGML5.jpg)
*right most cap* pulled a random picture off internet.
I think it was $35 or so in the sale.
How much is a binge green slofi worth?Show Image(http://i.imgur.com/P5jGML5.jpg)
*right most cap* pulled a random picture off internet.
I think it was $35 or so in the sale.
I was referring to market value!
I recently got my hands on this keyboard:Around 30$.
Cherry G80-11900
What is this worth(brand new out of box)?
This. If you want to flip it, that is your choice. But you will have to either set a price and see who bites or put it on eBay and post the link in the member auctions subforum.Considering binge prefers his caps are sold at what he sells them for, $35 plus shipping or so.How much is a binge green slofi worth?Show Image(http://i.imgur.com/P5jGML5.jpg)
*right most cap* pulled a random picture off internet.
I think it was $35 or so in the sale.
I was referring to market value!
I recently got my hands on this keyboard:Around 30$.
Cherry G80-11900
What is this worth(brand new out of box)?
I recently got my hands on this keyboard:Around 30$.
Cherry G80-11900
What is this worth(brand new out of box)?
Might as well throw it in the bin then.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
Military Grey last one sold was $7000, think buyers for ~$4000 are easy
Military grey is closer to the gunmetal grey that made the 356cl famous, and is the rarer of the three colors.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
Military Grey last one sold was $7000, think buyers for ~$4000 are easy
Military grey is closer to the gunmetal grey that made the 356cl famous, and is the rarer of the three colors.
K, thanks. That's what I thought. It's insane how a difference in the ano can change the price by so much.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
Military Grey last one sold was $7000, think buyers for ~$4000 are easy
Military grey is closer to the gunmetal grey that made the 356cl famous, and is the rarer of the three colors.
K, thanks. That's what I thought. It's insane how a difference in the ano can change the price by so much.
This is a collector's hobby, an enthusiast would just use one of the more available customs since it isessentiallythe same thing.
What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
Military Grey last one sold was $7000, think buyers for ~$4000 are easy
Military grey is closer to the gunmetal grey that made the 356cl famous, and is the rarer of the three colors.
K, thanks. That's what I thought. It's insane how a difference in the ano can change the price by so much.
This is a collector's hobby, an enthusiast would just use one of the more available customs since it is essentially the same thing.
Ugh. I hate it, when people throw away usable stuff… made from scarce resources. Simply because of "opportunity cost" or whatever.I recently got my hands on this keyboard:Around 30$.
Cherry G80-11900
What is this worth(brand new out of box)?
Might as well throw it in the bin then.
Price of a good condition SSK?
Koala the only.keyboard worth using 2012-2017 ;)What's the value of an OTD 356 mini in military? Pics: http://imgur.com/a/vgtVv.
Very very high, but it can vary a huge amount based on how many are looking and how much they are willing to pay
2000-5000 is probably a realistic estimate depending on a number of factors
It is one of the rarest and most sort after boards around and my personal favourite and end game board, I have black minis but the military is the dream
What makes it the "Military" vs a Black? Just the color? Beautiful KB, BTW.
Military Grey last one sold was $7000, think buyers for ~$4000 are easy
Military grey is closer to the gunmetal grey that made the 356cl famous, and is the rarer of the three colors.
K, thanks. That's what I thought. It's insane how a difference in the ano can change the price by so much.
This is a collector's hobby, an enthusiast would just use one of the more available customs since it is essentially the same thing.
im curious to know whats your daily driver
Looking at purchasing a TX-87 but having a hard time putting a value on it? Any thoughts?
Looking at purchasing a TX-87 but having a hard time putting a value on it? Any thoughts?
kin25 would have the price for the kit in this thread. Here is a link to a post where he was selling a TX84 and TX pad https://geekhack.org/index.php?topic=86076.msg2333216#msg2333216
In your humble opinions, what fetches better prices (is easier to sell); white/grey or black/black (both 55g) RF 87U?
If you don't have an SSD in it already, consider switching to an SSD. The change can really revolutionize "slow" machines.
How much is an escort service otterphile worth? Someone is offering to trade it along with a Topre cobalt bombking for my ergodox.
I wanna purchase a Hammer Case, how much does it cost to get one?
How much is an escort service otterphile worth? Someone is offering to trade it along with a Topre cobalt bombking for my ergodox.
Most Otters can go for $175-$250 depending on the color way. Although, it is frowned upon to flip them. Retail is was roughly $50-$60.
What's a NiB G81-1800 case with original box worth? The box has all the original documents, and is in basically perfect condition.
not much like $20 at most, and last I checked leeku 1800 are out of stock, so it's going to be hard to sell it.
Contemplating whether I should sell my HHKB Professional 2, white with blank keycaps. Comes in box. Also an Oktoberfest escape clack that fits the HHKB. How much could I sell both of these for separately? :)180 hhkb and 250 oktober maybe a bit less since topre is in recession
Contemplating whether I should sell my HHKB Professional 2, white with blank keycaps. Comes in box. Also an Oktoberfest escape clack that fits the HHKB. How much could I sell both of these for separately? :)180 hhkb and 250 oktober maybe a bit less since topre is in recession
Sent from my Pixel XL using Tapatalk
Contemplating whether I should sell my HHKB Professional 2, white with blank keycaps. Comes in box. Also an Oktoberfest escape clack that fits the HHKB. How much could I sell both of these for separately? :)180 hhkb and 250 oktober maybe a bit less since topre is in recession
Sent from my Pixel XL using Tapatalk
Okay thanks! :) Can anyone second this for me?
Contemplating whether I should sell my HHKB Professional 2, white with blank keycaps. Comes in box. Also an Oktoberfest escape clack that fits the HHKB. How much could I sell both of these for separately? :)180 hhkb and 250 oktober maybe a bit less since topre is in recession
Sent from my Pixel XL using Tapatalk
Thanks!
Okay thanks! :) Can anyone second this for me?
i tend to put HHKBs a little lower, in the 150-175 range, but if it's in good condition 180 shipped is fine
clacks will go for whatever you post them for
How much are microbatch fugus worth? Doing a trade right now, and just wanted to know the value of them. A Protoculture and a SCP-073 to be exact. Thanks again everyone!
How much are microbatch fugus worth? Doing a trade right now, and just wanted to know the value of them. A Protoculture and a SCP-073 to be exact. Thanks again everyone!
I'd say $150-200 on ProtoC and $200-250 on SCP, but it might depend on the individual.
What's a brand new KBParadise V60 with a dead A key worth? It has Matias Quiet Click switches and I can send it with top or front print keys, original packaging and all extras.Is it possible to fix it without soldering?
How much are microbatch fugus worth? Doing a trade right now, and just wanted to know the value of them. A Protoculture and a SCP-073 to be exact. Thanks again everyone!
I'd say $150-200 on ProtoC and $200-250 on SCP, but it might depend on the individual.
Okie, thanks again for the reply! Much appreciated! It's really hard to get a finger on the estimated values of artisans as everyone doesn't seem to want to post them for money. Do you know the going rate for booper stuff? (colonels to be exact)
How much are microbatch fugus worth? Doing a trade right now, and just wanted to know the value of them. A Protoculture and a SCP-073 to be exact. Thanks again everyone!
I'd say $150-200 on ProtoC and $200-250 on SCP, but it might depend on the individual.
Okie, thanks again for the reply! Much appreciated! It's really hard to get a finger on the estimated values of artisans as everyone doesn't seem to want to post them for money. Do you know the going rate for booper stuff? (colonels to be exact)
Not as sure about Booper stuff, but I'd guess $300-500 depending on the colorway?
This isn't a price check question, but how long does it usually take for classified posts to get approved? I've had mine pending for a few days now :/
This isn't a price check question, but how long does it usually take for classified posts to get approved? I've had mine pending for a few days now :/
Key caps are dye-sub pbt Italian layout.
I'm thinking of buying a 55g RealForce keyboard for the domes & was wondering how much I could recuperate from selling either the full keyboard with 45g domes or selling what's left (such as the keycaps) for parts.
(Thank you in advance for the info!)
I'm thinking of buying a 55g RealForce keyboard for the domes & was wondering how much I could recuperate from selling either the full keyboard with 45g domes or selling what's left (such as the keycaps) for parts.
(Thank you in advance for the info!)
keycaps might go for $50-60. I think that's what I see people listing HHKB sets for.
for the whole keyboard, maybe $150 on the high end? a brand new 45g 87u is about $210, so I would price it less than a used one because it's been tinkered with.
Key caps are dye-sub pbt Italian layout.
I don't see any keycaps.
Not a keyboard, but what should I expect to pay for a second-hand Steam Controller in mint condition? Is $40 shipped okay?They've been sold for $20 shipped new on sale conus and aren't that well regarded.
What's a set of DSA Quartz with the pro mods and gamer set worth? Thanks.
Edit: I'd also like to know the price on a Leopold FC900r with blues
Looking for prices on the following:
Bubblegum Colonel MX
Chicken Little Warus II MX
Sent from my Pixel XL using Tapatalk
Looking for prices on the following:
Bubblegum Colonel MX
Chicken Little Warus II MX
Sent from my Pixel XL using Tapatalk
Colonel 300-350ish
Warus 225-325, depending on how bad buyer wants it
How much could I conceivably get for a good condition bolt modded teensy converted 1990 square label model M?
Would 150$ shipped be reasonable?
How much is a 356.2 worth in todays market? Paging potek
How much are original Cherry Doubleshots with English and Cyrillic letters worth? Basically the same like GMK ones but original Cherry :)Pics?
How much are original Cherry Doubleshots with English and Cyrillic letters worth? Basically the same like GMK ones but original Cherry :)Pics?
Just wondering what a Deck Legend with white ledsTough one. I have one. It was my first mechanical keyboard and the build quality is great, just not sure what the original price is since I imported mine.
Just wondering what a Deck Legend with white ledsTough one. I have one. It was my first mechanical keyboard and the build quality is great, just not sure what the original price is since I imported mine.
EDIT: The original price was $189 (Déck Legend Frost - Archive.org (http://web.archive.org/web/20130320121917/http://www.deckkeyboards.com/product_info.php?products_id=95))
My guess is somewhere around $100-120 or so?
any ideas for how much a Keycool Hero 84 is worth? cherry mx browns, laser engraved pbt caps. it's from massdrop BEFORE the most recent one, which now only offers Kailh switches. this board has Cherrys.didn't get a response last time so I want to ask again :)
http://i.imgur.com/4Dbspml.jpg
$1100 is good for a BNIB silver 360c, right?
$1100 is good for a BNIB silver 360c, right?That's a steal
think you can get hhkb for around 200$$1100 is good for a BNIB silver 360c, right?That's a steal
Sent from my Pixel XL using Tapatalk
You can get a Dell for $3think you can get hhkb for around 200$$1100 is good for a BNIB silver 360c, right?That's a steal
Sent from my Pixel XL using Tapatalk
think you can get hhkb for around 200$$1100 is good for a BNIB silver 360c, right?That's a steal
Sent from my Pixel XL using Tapatalk
Thanks, Nick! Do you think that price would be w/ or w/o the original box, or do you think the box doesn't affect the value much?
You can get a Dell for $3
Same feel
Sent from my Pixel XL using Tapatalk
Truest I miss you nickThanks, Nick! Do you think that price would be w/ or w/o the original box, or do you think the box doesn't affect the value much?
I would personally pay more if it had the box, maybe since you're bundling with that case it won't matter.You can get a Dell for $3
Same feel
Sent from my Pixel XL using Tapatalk
no fancy caps for dell kbd tho
Truest I miss you nickThanks, Nick! Do you think that price would be w/ or w/o the original box, or do you think the box doesn't affect the value much?
I would personally pay more if it had the box, maybe since you're bundling with that case it won't matter.You can get a Dell for $3
Same feel
Sent from my Pixel XL using Tapatalk
no fancy caps for dell kbd tho
Sent from my Pixel XL using Tapatalk
Topre JulysicleShow Image(http://i.imgur.com/ukwnFwE.jpg)
Cost of lz-ex or lz-Sq kits or built boards?
I really really want these stuffs.
Looking the prices of two items:
1. Leopold FC660C Dye-Sublimated PBT Gray Keycaps (product details: http://elitekeyboards.com/products.php?sub=leopold,compact&pid=fc660ceg). Very good condition. Comes with the original Box (including original cardboard insert and papers) as well the original USB cord, Velcro cable tie with Leopold logo, and alternate Caps Lock and Ctrl keys (USB cord, cable tie and alternate keys have never been used). The board has been silenced using a modification technique as described here (using ironed landing pads): https://geekhack.org/index.php?topic=49046.0 but deviating a bit as semi-permanent, acid-free micro glue dots adhesive was used instead of permanent glue to attach soft landing pads sections to housings (most of the housings don't contain any adhesive at all). Therefore, the entire modification can be undone without causing damage or alterations to the original components. Has only been used with acid-free magic tape applied to the top of the ABS space bar, so it still look brand new (no shine at all).
2. HHKB Pro 2, white/gray with printed keys. Very good condition, never modded. Comes with the original white USB cable and an official Happy Hacking soft carrying case (product details: http://elitekeyboards.com/products.php?sub=access,cases&pid=pdkb01sd), also in great condition. Original box may not be included; I am still trying to hunt this down in some of my storage, so hopefully it will be included. Therefore, providing a price for with, as well as without, the original box would be helpful.
Thanks!
Cost of lz-ex or lz-Sq kits or built boards?
I really really want these stuffs.
no idea what ex even is but the SQ has sold in the past here for $1000
Cost of lz-ex or lz-Sq kits or built boards?
I really really want these stuffs.
Both are pretty much unobtainium at this point. Last SQ that went was like 1k, I think the last EX was about that. They're probably worth more than that now.
Topre JulysicleShow Image(http://i.imgur.com/ukwnFwE.jpg)
Kwk Topre Esc + Fn blanks. Specifically Spectre White
Topre JulysicleShow Image(http://i.imgur.com/ukwnFwE.jpg)
:D What about keywoks? Thanks!!
:D What about keywoks? Thanks!!
$400 is what have a lot have been bought and sold for recently.
Topre JulysicleShow Image(http://i.imgur.com/ukwnFwE.jpg)Show Image(https://media2.giphy.com/media/l2R0aIkYUXywiDMdO/giphy.gif)
Quick PC here :
Frozen Core FPS Gamer Set
X 15 Kosmo
Thanks again!!
Can anyone tell me how much a Grasshopper Green Mummy II would go for?
Anyone can help with the value of a Hypersphered 55g Dome Swapped Novatouch ?
I have $3. What's that worth?
I have $3. What's that worth?
2$
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
Yeah and in some places it's a big ass slice
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
Yeah and in some places it's a big ass slice
Especially on the boardwalk :cool:
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
Yeah and in some places it's a big ass slice
Especially on the boardwalk :cool:
I know man! I'm 15 minutes from Seaside heights!
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
Yeah and in some places it's a big ass slice
Especially on the boardwalk :cool:
I know man! I'm 15 minutes from Seaside heights!
Lucky!
I have $3. What's that worth?
2$
can't even get a slice of pizza for that :(
You can in jersey ;)
Yeah and in some places it's a big ass slice
Especially on the boardwalk :cool:
I know man! I'm 15 minutes from Seaside heights!
Lucky!
I guess. It's beyond annoying in the summer
What is a decent condition Unsaver going for these days?
What is a decent condition Unsaver going for these days?
I have two on the way so
Really would like to know what it's worth, hopefully I didn't overpay.
Hi I'd like to pricecheck a fully working used Leopold FC980C. It's a bit dirty but since I don't have a keycap puller atm I wouldn't even like to try and clean it since I might damage it, even pulling off the key for the picture was scary.
I bought it in January and I'm just curious how much I'd get for it in its current state.Show Image(https://gyazo.com/d50d0816b6f865414449e5af4607dd82)
http://imgur.com/a/u8evf Extra pictures
-------------------------Topre keyboards--------------------------
-RealForce 87U (55g)
-Leopold FC980C
-Leopold FC660C
-CoolerMaster CM Storm NovaTouch
--------------------------Romer G--------------------------
-Logitech G410 Atlas Spectrum RGB
How much would my current keyboard sell for, or what is a fair price?
Planck with gateron blues, red anodized aluminum case, black aluminum feet mounted to the case. Blank nantucket selectric keycaps with the layer keys in double shot red with blue anchors for the upper and lower arrows.
What is the common practice for selling keyboards/keycaps, if not considering possible rise in value due to rarity? For example, do people just deduct a certain percentage from original purchase price for pre-owned keyboards/keycaps as a general rule-of-thumb (assuming everything's in excellent condition)?
-------------------------Topre keyboards--------------------------
-RealForce 87U (55g)
-Leopold FC980C
-Leopold FC660C
-CoolerMaster CM Storm NovaTouch
$205 (a little hard to find right now), $200(?), $210, maybe $175 if ANSI
--------------------------Romer G--------------------------
-Logitech G410 Atlas Spectrum RGB
Not much, maybe $45
What's a logoless Jellykey The First Frontier spacebar (https://www.jellykey.com/artisan-keycap/spacebar-the-first-frontier-keycap-1) worth?jellykeys rarely sell on GH so I don't think we would be the best to ask also due to the fact that the consensus from GH is jellykeys is meh at best MM would be your best bet for pricing, I would expect what you paid for it though just not on this forum lol
I saw one of them sell for $170 on reddit recently so I've been thinking about selling/trading mine as well (just ordered a HHKB so selling it would make my wallet hurt a little less).
I don't check mechmarket/classifieds that often so I don't know if $170 is a higher or lower than what they would typically go for.
What would be a fair price to ask for Purple on White JTK Debut set with the PoW Mod Pack (no real use)?
How much does a good condition, unmodified, barebones Novatouch go for now?Novatouchs go for arround 150-180$
I have one that I'm not really appreciating and I'm wondering what I can get for it.
CM Storm QFR MX Green? I have it listed as $65 but receiving some lowballs...are they lowballs or do I want too much?
Price check on a sexy r1 titanium gray Jane with acrylic diffuser, SPRiT-72g tactile grays (85g on space bar and 100g on Esc), MX Lock, and Gateron Blue on Num and Caps Locks?
Price check on a sexy r1 titanium gray Jane with acrylic diffuser, SPRiT-72g tactile grays (85g on space bar and 100g on Esc), MX Lock, and Gateron Blue on Num and Caps Locks?
Isn't that just a Mech27 clone?
Price check on a sexy r1 titanium gray Jane with acrylic diffuser, SPRiT-72g tactile grays (85g on space bar and 100g on Esc), MX Lock, and Gateron Blue on Num and Caps Locks?
Isn't that just a Mech27 clone?
Dang, you're right.
Maybe $200 tops, then?
Weedioactive clack and Gemini Kosmo, both mxclack thread a few posts below would be best to ask about the clack, as for the kosmo maybe $150-$200 depending on how good the face is, most look god aweful but if you have a better one maybe more again reddit MM seems to like kosmo more so you may get a better price there
Show Image(http://i.imgur.com/febhviz.jpg)
OTD 356CL DGE. found it in an old box.
how much is this old case? :-X still competitive..?
Show Image(http://i.imgur.com/febhviz.jpg)
OTD 356CL DGE. found it in an old box.
how much is this old case? :-X still competitive..?
Show Image(http://i.imgur.com/febhviz.jpg)
OTD 356CL DGE. found it in an old box.
how much is this old case? :-X still competitive..?
Show Image(http://i.imgur.com/febhviz.jpg)
OTD 356CL DGE. found it in an old box.
how much is this old case? :-X still competitive..?
Show Image(http://i.imgur.com/febhviz.jpg)
OTD 356CL DGE. found it in an old box.
how much is this old case? :-X still competitive..?
Weedioactive clack and Gemini Kosmo, both mxclack thread a few posts below would be best to ask about the clack, as for the kosmo maybe $150-$200 depending on how good the face is, most look god aweful but if you have a better one maybe more again reddit MM seems to like kosmo more so you may get a better price there
Humm not personally seen them for 300+ so I doubt they actually sell for that much considering they dont often look very good facewise, like I said MM likes them more so better prices will be had there anywayWeedioactive clack and Gemini Kosmo, both mxclack thread a few posts below would be best to ask about the clack, as for the kosmo maybe $150-$200 depending on how good the face is, most look god aweful but if you have a better one maybe more again reddit MM seems to like kosmo more so you may get a better price there
I have not seen a Kosmo MX sell for less than $250 on mm lately. Many sell for $300+
Humm not personally seen them for 300+ so I doubt they actually sell for that much considering they dont often look very good facewise, like I said MM likes them more so better prices will be had there anywayWeedioactive clack and Gemini Kosmo, both mxclack thread a few posts below would be best to ask about the clack, as for the kosmo maybe $150-$200 depending on how good the face is, most look god aweful but if you have a better one maybe more again reddit MM seems to like kosmo more so you may get a better price there
I have not seen a Kosmo MX sell for less than $250 on mm lately. Many sell for $300+
http://imgur.com/a/qw9sT
i had this set of key-caps laying around.
i have no use for them so i guess i want to sell them. i heard they have a decent value. so i was wondering whats the true value?
3 caps are damaged, as seen on the pictures.
Alps 64 with SKCL Greens (cleaned, lubed 55g gold springs), Hasu PCB material AEK layout plate [/size]I have a set of AEK caps to suit too, but no spacebar stab
Can I get a price check on a TGR Jane, a 356Cl and the dark grey edition, and a 356Mini?
Sent from my iPhone using Tapatalk
Thanks man! I can cross off ever trying to get an OTD board but TGR is still manageable.Can I get a price check on a TGR Jane, a 356Cl and the dark grey edition, and a 356Mini?
Sent from my iPhone using Tapatalk
Jane is ~1k, depends on color. I heard recently that a black one went for a little over 1200, but other colors have gone as low as 850.
CLs typically go backdoor, but the latest I've heard they're well north of 8k, maybe into the 10-12k range. DGE, I've heard anywhere from 2.5k to 4k.
Mini is 1500 for red, 2500 for black, 3000 for khaki.
(all in USD)
Can I get a price check on a TGR Jane, a 356Cl and the dark grey edition, and a 356Mini?
Sent from my iPhone using Tapatalk
Jane is ~1k, depends on color. I heard recently that a black one went for a little over 1200, but other colors have gone as low as 850.
CLs typically go backdoor, but the latest I've heard they're well north of 8k, maybe into the 10-12k range. DGE, I've heard anywhere from 2.5k to 4k.
Mini is 1500 for red, 2500 for black, 3000 for khaki.
(all in USD)
Can I get a price check on a TGR Jane, a 356Cl and the dark grey edition, and a 356Mini?
Sent from my iPhone using Tapatalk
Jane is ~1k, depends on color. I heard recently that a black one went for a little over 1200, but other colors have gone as low as 850.
CLs typically go backdoor, but the latest I've heard they're well north of 8k, maybe into the 10-12k range. DGE, I've heard anywhere from 2.5k to 4k.
Mini is 1500 for red, 2500 for black, 3000 for khaki.
(all in USD)
hello puddsy.. no no..
you have wrong information. :-*
356mini v1 military(khaki) is extremely rare. it s like a actually blank check.
356mini v1 khaki is more more rare than 356.2 at least.. khaki quantity was made 20x set under
I've got 3x 2ml vials of krytox 103 for sale. I have no idea what I paid for them... It's a long story. Curious what they're worth.
https://geekhack.org/index.php?topic=89086.0
Around what are LZ-S worth these days? Black w/red plate/bottom, a87 pcb, built by gon. Considering it as part of a trade.
Around what are LZ-S worth these days? Black w/red plate/bottom, a87 pcb, built by gon. Considering it as part of a trade.
Around what are LZ-S worth these days? Black w/red plate/bottom, a87 pcb, built by gon. Considering it as part of a trade.
Switches?
Trade value depends on the desire of the buyer ;)
A lot. I think 800-1k.
Switches?
62g vintage brown, stickered, I believe lubed but I did not actually open one myself to check (they are smooth / feel nice tho)Trade value depends on the desire of the buyer ;)
;)A lot. I think 800-1k.
Thanks
Anyone know how much SA Godspeed solar alphas, novelties, and TSAFox kits go for combined? Thanks
Anyone know how much SA Godspeed solar alphas, novelties, and TSAFox kits go for combined? ThanksMaybe 200-225 usd? A set of solar alphas + modifiers + novelties + tsafox + numpad sold for 250 a couple of days ago.
EDIT: I just now realized that you didn't include modifiers in your grouping so probably significantly less than that.
-Hana DSA keycaps (includes Base kit, Matcha Kit, Flextras, Numpad Kit, Pink F-Row)Base kit is usually sold for $150~ alone, however with Basekit + JP + Matcha + Novelties + Pink F-Row was sold for around $200-$250.
Hi,
Looking for some price checks for the following:
- Kmac Happy
- IBM SSK
cheers
Hi,Kmac 700+
Looking for some price checks for the following:
- Kmac Happy
- IBM SSK
cheers
Royal Alpha OG Keyset (New)
http://imgur.com/SO5n3On
I have a GMK Dolch base set that I bought from Massdrop (Originative) about two years ago. It can cover 60% and TKL, with a few extras like stepped caps lock, I believe a 7u space, and some other sized modifiers. No num pad.
Hi,
Looking for some price checks for the following:
- Kmac Happy
- IBM SSK
cheers
Those are both pretty worthless. The M122's on ebay sell for literally nothing I've seen a listing before for 7 of them for $15 or $2 each
Black alps are regarded as some of the worst alps ever made as well. Personally I wouldn't buy either of these, just wait there will be plenty of other vintage keyboards for sale with time.
I got this cap through a trade. Can someone id it and tell me the retail price?
Thanks
(Attachment Link)
I have a Pok3r ISO RGB which is from an optical point of view in perfect condition. All LEDs and all of the modes are working, the only problem is that the switches of the following keys don´t register:
7, Y, U, J, M, #, right Windows, ALT GR, right STRG
The rest ist working fine, I have no idea what that caused :(
How much can I get for this one?
Pc on a apollo kosmo v2?
Hey guys, would anyone happen to know how much this IBM Numberpad with Buckling springs would be worth?Show Image(http://webwit.nl/input/ibm_japan/5576_003_numpad2.jpg)
Pc on a apollo kosmo v2?
Retail. Especially considering they haven't even shipped.
Are you looking to sell for more than what they cost or is someone selling theirs for high?
dem sonPc on a apollo kosmo v2?
Retail. Especially considering they haven't even shipped.
Are you looking to sell for more than what they cost or is someone selling theirs for high?
I was just curious. Was offered 350 for it but I have no intention to sell.
Pc on a apollo kosmo v2?
Retail. Especially considering they haven't even shipped.
Are you looking to sell for more than what they cost or is someone selling theirs for high?
I was just curious. Was offered 350 for it but I have no intention to sell.
What would a black HHKB Pro 2 (printed keys) + Hasu USB controller + PBT spacebar + lubed/dental-banded go for?
Have owned it about a year, used actively 6 months (sat in the box for a while). PBT spacebar is from eBay but it's straight and sits well. Can't remember the dental band sizing from the top of my head but the lube is SuperLube 51010.What would a black HHKB Pro 2 (printed keys) + Hasu USB controller + PBT spacebar + lubed/dental-banded go for?
depends on how much use, any issues?
source of pbt spacebar, and the specifics on the lube and dental bands?
Sent from my SM-G930V using Tapatalk
How much is a trans red BBv1 with wasd set worth?
Anyone know what a brand new Focus FK-2001 with white Alps switches goes for? https://m.imgur.com/a/weqXIShow Image(https://i.imgur.com/IxQTpxz.jpg)
How much would you pay for 88 non modified/lubed Cherry MX Brown Switches?
(They're all in excellent condition, and some are barely or never used.)
-------------------------Topre keyboards--------------------------
-RealForce 87U (55g)
-Leopold FC980C
-Leopold FC660C
-------------------------Topre Keycaps-------------------------
-Modifiers 6-key sets (Shift x2, Ctrl x2, Alt x2) (one lavender set) (one green set) (one blue set)
-WASD (orange)
-Enter (orange)
-Esc (red)
-PBT spacebars (red, blue, dark gray)
--------------------------Matias Quiet Click keyboards--------------------------
-Matias Mini Quiet Pro x2 (one of them has connection problem with the USB cable. You have to put pressure on it or it won't connect)
-KBParadise V80 TKL (Dolch)
-------------------------ALPS Keycaps-------------------------
-Olivette
--------------------------Cherry MX keyboards--------------------------
-WASD V2 87-Key Barebones (Blue Cherry MX)
-Ducky One White TKL (Brown Cherry MX)
-MechanicalEagle Z-77 (Outemu Blue Switches, Multicolor Backlit)
-Leopold 21-Key Numeric Keypad, (Brown Cherry MX)
-------------------------Cherry MX Keycaps-------------------------
-Tai-Hao (Orange & Black)
-Tai-Hao (Army Green & Black)
--------------------------Romer G--------------------------
-Logitech G410 Atlas Spectrum RGB
--------------------------Tester Kits--------------------------
-Max Keyboard Cherry MX Tester Kit
-Max Keyboard Pro Cherry MX Tester Kit
-NPKC 17 Switch Tester
Hum, a bunch of inquiries on prices but no answers...
Yeah sadly it's almost easier selling stuff in these kinds of threads than making an actual thread in classifieds :confused:Hum, a bunch of inquiries on prices but no answers...
Everybody sending PM's and trying to buy stuff instead. :P
But seriously some things are just hard to price.
Hum, a bunch of inquiries on prices but no answers...
Everybody sending PM's and trying to buy stuff instead. :P
But seriously some things are just hard to price.
I don't post unless I am very sure about the price. Try not to spread info that may not be extremely accurate, others may feel the same way.
Have some offers somewhere else, but I have no idea what this NEC APC-H410E is worth, so IDK what to do.As for the NEC:
Just know I learned a lot on here a while back looking for G81-3077 and Cherry MY boards, so I posted here.
As for the NEC:
Sounds like it is an interesting board for collectors but needs the right converter to make it work.
NEC switches are apparently fairly silent but feel and click like Cherry Blues.
Something like $40-50 in good condition?
Topre Realforce blank set?
(http://i.imgur.com/7RY0mgx.jpg) (http://imgur.com/7RY0mgx)
thanks.
Topre Realforce blank set?
(http://i.imgur.com/7RY0mgx.jpg) (http://imgur.com/7RY0mgx)
thanks.
Topre Realforce blank set?
(http://i.imgur.com/7RY0mgx.jpg) (http://imgur.com/7RY0mgx)
thanks.
I need it!
Topre Realforce blank set?
(http://i.imgur.com/7RY0mgx.jpg) (http://imgur.com/7RY0mgx)
thanks.
I need it!
iamtootall the green cap monitor bot confirmed.
Looking to balance a trade of an Eggface v2 (1/5) for a PS Fugu (1/20). Clearly they're both rare, but what (if any) value should be added to the Fugu to make this fair?
Looking to balance a trade of an Eggface v2 (1/5) for a PS Fugu (1/20). Clearly they're both rare, but what (if any) value should be added to the Fugu to make this fair?
Hello!
I have some rather unusual items:
1) Cherry V80-1800 HFM prototype / pre-production keyboard from late 1980s (G80-1800). This board has the Cherry MX dark blue swithches (only Cherry keyboard known with these rare swithces?) - NOS/unused-prototype
2) G80-0414 used keyboard - neat condition, but the case is yellow - this is an old board, IBM clone from mid 1980s - should be fully working, not tested though as I don't own an XT converter
3) G80-3000 HAU used keyboard from early 1990s (F24) - works, tested - neat/ok condition, but few keys/buttons are lighter in color
4) New-in-box black G81-3000 LRNEU-2 keyboard with serial number: 0000008 date: 1P30 00
I am looking for price checks for the following:
Godspeed Custom SA Keycap Set:Show Image(https://i.imgur.com/XbeSzsC.jpg)
Hi, how much should I ask for a double-shot G80-1800 HAD keycaps set? I've got them less then two months ago, from a NIB keyboard.
The Einfg keycap is slighty damaged in the top left corner, but beside that they're in excellent shape.
Here's a couple pictures (the spacebar is the one on the bottom, 7u wide):
http://imgur.com/a/MzQ9z
Thanks.
Northgate omnikey 101 alps skcm white: cleaned by me and in good functional condition.
Hi guys,Honestly it depends on someone wanting those exact caps as they aren't going to match much else.
Any ideea how much a set of topre compatible keycaps from an old typewriter would go?
They are SA profile with side printed querty, with top in hebrew.
pics: https://photos.app.goo.gl/IclRdAbducR061ml2
Thanks !
I'm interested in getting a programmable TKL,Where in the world are you?
Apple Silver 360 Corsa1.5-2k
G80-5000 HAAUS (ANSI US layout), used but the unique keys (except spacebar) aren't really used.
HHKB BT with 55g domes and purple sliders
Not selling, just for record keeping ;)
Apple Silver 360 Corsa1.5-2k
G80-5000 HAAUS (ANSI US layout), used but the unique keys (except spacebar) aren't really used.
HHKB BT with 55g domes and purple sliders
Not selling, just for record keeping ;)
800$ish
400 to the right buyer
How much is OTD 356 series in markets ?5k+
356CL
356.2
356DGE
need info please ;)
Price check, if anyone knows:
- DSA Eve TKL set (some keys are a bit shiny)
- HHKB2 with JTK sliders and Hypersphere rings installed
Also, I have some parts from butchered ISO Novatouch -
45g domes + springs, plate, PCB, bunch of sliders.
Not really sure if I should try to sell it, or trade for .. something.
Thanks :thumb:
Any ideas on values? I'd like to get these listed for sale but I don't know how much to ask.How much did you pay for them? That would be a good place to start as from what I can tell, the values on keycaps doesn't drop that much--especially when most sets were just a one-time run.
Thanks
George
A set of Noir SYM TKL from 7bit's Round4?
Never see them go on sale.
A set of Noir SYM TKL from 7bit's Round4?
Never see them go on sale.
I'd say most currently active members don't even know what those are but even rare DCS sets don't usually sell very high, I'd say it all depends on if someone actually wants them. You could list them higher and see if anyone is interested and then lower your price until they sell.
KMAC v1.3 titanium with ergo clears?
What would you sell an Alps64 with clicky switches and matching AEK keyset?
Thanks!
What would you all sell an Ergodox Infinity with Cherry Blues + DSA granite with ED, text and icon mods, and bonus kit for?
here's a fun one
KMAC 1.2 with a TX87 PCB
and a GON TKL (this one asking for a friend)
also nice post countThat's amazing! In all my decades on forums, I've never seen this once. So cool! :cool:
Looking for the 75% Aluminum case in silver. Here is the old GB: https://geekhack.org/index.php?topic=85021.0Write the guy a PM is my best guess :)
Any estimate on what the price is, and also how obtainable it is?
I've seen TECK go anywhere $100-200. One major issue with them is how the keyboard is prone to switch chatter, which makes it a risky purchase.
The issue has little/nothing to do with switch brand, although Truly Ergonomic tried to blame Cherry for poor quality, when they switched from Cherry MX to Kailh. It was/is primarily a firmware issue.I've seen TECK go anywhere $100-200. One major issue with them is how the keyboard is prone to switch chatter, which makes it a risky purchase.
Maybe they have Kailh Switches.
$500-600 seem reasonable for an OTD Cheat, half plate?
Also I have a case for a phantom PCB that looks eerily similar to an OTD Koala, anybody know the name of it?
$500-600 seem reasonable for an OTD Cheat, half plate?
Also I have a case for a phantom PCB that looks eerily similar to an OTD Koala, anybody know the name of it?
send a pic of the case, i can tell you what it is
cheat is $700
$500-600 seem reasonable for an OTD Cheat, half plate?
Also I have a case for a phantom PCB that looks eerily similar to an OTD Koala, anybody know the name of it?
send a pic of the case, i can tell you what it is
cheat is $700
Found the exact case on an old GB.
https://geekhack.org/index.php?topic=34606.0
Looks like they sold for $325 + shipping back then.
Price check on some Bros? Reasonable/fair prices, not max profits. :-*I´d say either max profit or retail :(Show Image(https://i.imgur.com/qco76XA.jpg)Show Image(https://i.imgur.com/uhQuSHh.jpg)
Reaper V1 is Heavy Metal
Price check on some Bros? Reasonable/fair prices, not max profits. :-*I´d say either max profit or retail :(Show Image(https://i.imgur.com/qco76XA.jpg)Show Image(https://i.imgur.com/uhQuSHh.jpg)
Reaper V1 is Heavy Metal
I´d say around 300 for the ordinary bros, maybe 250 for the BS and the reaper is prob worth real muchPrice check on some Bros? Reasonable/fair prices, not max profits. :-*I´d say either max profit or retail :(Show Image(https://i.imgur.com/qco76XA.jpg)Show Image(https://i.imgur.com/uhQuSHh.jpg)
Reaper V1 is Heavy Metal
Any idea what max profit prices are? Can always dial it back from there. I just don't know a starting point at all. :confused:
I´d say around 300 for the ordinary bros, maybe 250 for the BS and the reaper is prob worth real muchPrice check on some Bros? Reasonable/fair prices, not max profits. :-*I´d say either max profit or retail :(Show Image(https://i.imgur.com/qco76XA.jpg)Show Image(https://i.imgur.com/uhQuSHh.jpg)
Reaper V1 is Heavy Metal
Any idea what max profit prices are? Can always dial it back from there. I just don't know a starting point at all. :confused:
Worth noting, that those are estimates, might be really off with the pricing...
I´d say around 300 for the ordinary bros, maybe 250 for the BS and the reaper is prob worth real muchPrice check on some Bros? Reasonable/fair prices, not max profits. :-*I´d say either max profit or retail :(Show Image(https://i.imgur.com/qco76XA.jpg)Show Image(https://i.imgur.com/uhQuSHh.jpg)
Reaper V1 is Heavy Metal
Any idea what max profit prices are? Can always dial it back from there. I just don't know a starting point at all. :confused:
Worth noting, that those are estimates, might be really off with the pricing...
I'd agree with that. Maybe 450 for the Reaper v1 and about 60 - 75 for the TR8-0R Reaper v2
Looking for some reasonable checks on some artisans. Keyforge Pale Ale Mayhem in Topre, buckling spring classic Reapers by Bro, and some solid color Switzcaps Octos. Thanks pals
Hi good people
Anyone knows what SA godspeed goes for? I have a set i am not gonna get on a board.
Happy Xmas around the globe! :)
Hi good people
Anyone knows what SA godspeed goes for? I have a set i am not gonna get on a board.
Happy Xmas around the globe! :)
You should probably mention which sets you have.
How much does a TGR-Jane v1 with zealio 65g go for?
Wondering what this Lightsaver V1 would fetch.
With MX Clear.
https://imgur.com/a/HNaDr
Hi good people
Anyone knows what SA godspeed goes for? I have a set i am not gonna get on a board.
Happy Xmas around the globe! :)
You should probably mention which sets you have.
Yhanks, yes! - Solar alphas + Modifiers + Norde + Novelties + tsafox kit
Hi good people
Anyone knows what SA godspeed goes for? I have a set i am not gonna get on a board.
Happy Xmas around the globe! :)
You should probably mention which sets you have.
Yhanks, yes! - Solar alphas + Modifiers + Norde + Novelties + tsafox kit
Maybe upwards of 300
https://www.reddit.com/r/mechmarket/comments/7ln9ju/usga_h_sa_godspeed_gmk_carbon_paypal_w_gmk_9009?sort=new
Hi good people
Anyone knows what SA godspeed goes for? I have a set i am not gonna get on a board.
Happy Xmas around the globe! :)
You should probably mention which sets you have.
Yhanks, yes! - Solar alphas + Modifiers + Norde + Novelties + tsafox kit
Maybe upwards of 300
https://www.reddit.com/r/mechmarket/comments/7ln9ju/usga_h_sa_godspeed_gmk_carbon_paypal_w_gmk_9009?sort=new
Thanks mate! about the price i paid :-* Have a good Xmas!
Hi, could I get some help identifying these?The very first one looks like a NTC KB-6521 (https://deskthority.net/wiki/NTC_KB-6251) which is a very solid board. I bought two of them, separately, for about €15 each. Switches are clicky on that one.
How much does a TGR-Jane v1 with zealio 65g go for?
try 950, take 850
janes are a bit out of style at the moment, so it might be hard to get a super high buyer for one
zealios add a fair bit to the value thoughWondering what this Lightsaver V1 would fetch.
With MX Clear.
https://imgur.com/a/HNaDr
try 700, take 600
lsv1s are pretty uncommon to see move in this era of keyboarding, so you'll probably get offers all over the place
there is a cult following for duck v1 boards, though, so you shouldn't have too hard a time finding a buyer
How much should an IBM Model M from 1986 like this one appraise at?
(Attachment Link)
(Attachment Link)
Price check on Kishsaver...original, unmodified condition.
Thanks!
Price check on Kishsaver...original, unmodified condition.Who is this guy! :thumb:
Thanks!
Price check on Kishsaver...original, unmodified condition.Who is this guy! :thumb:
Thanks!
Sent from my SM-G930V using Tapatalk
Price check on a The Cheat? Black/red/black, unassembled.
Hammer (60%) case?250ish :)
Hammer (60%) case?250ish :)
Not sure if this is where to post, sorry if it isn't. Wondering if anyone knows the value of a Fallen Flamingo Fugu.
(Attachment Link) (Attachment Link)
Since I have only used 5-6 modifier keys from Bauhaus, and only 1 from Tsangan icon set, I'm putting them up for a sale.
- Tsangan Icon Modifiers set - 30€
- Bauhaus Icon Modifiers set - 25€ (since it's missing a few keys which I need for my WKL build)
- Numpad keycaps - 10€
Looking for a price check for an LZ SK in silver.
https://imgur.com/a/DgzWj
Bro
The Rustler ~$60
Reaper 2 - TR8-0R ~$50
Wretched Zombro ~$75
Cherokey ~$60
Reaper Classic ~$50
KeyKollectiv
Exosphere Keywalla ~$65 - 75
Binge Caps
Polar Ice Skullthulu ~$250 +
Hidden Lab
Corrupted Master - Dirty Green ~$30
Skull Trooper - Polished White ~$30
Dark Lord Helmet - Weathered ~$30
OTTO - Trans Orange ~$30
KIRA - Trans Red ~$30
AQUA - Trans Blue ~$30
Krap Shop
Judgemental Skull - White ~$50
Red Chickey ~$50
Midnight Hue Sheep ~$50
Brainy - White, Red, and Gold ~$50
Zorb
Chilly Entling ~$35 ?
Fusion Golem ~$35 ?
Carbon Goblin ~$35 ?
Katz
Teal Hype Monkey ~$40
Gloyz
Green Dragon
Hot Keys Project
Trans Green G2 ~$25
Trans Clear Trooper (red helmet) ~$25
Trans Clear Warmaster (red eyes) ~$25
Trans Brilliant Lavender ~$25
Matt3o Granite Set
2 Full Sets with different add-ons
My opinion. Others may disagree.https://imgur.com/a/DgzWj
Bro
The Rustler ~$60
Reaper 2 - TR8-0R ~$50
Wretched Zombro ~$75
Cherokey ~$60
Reaper Classic ~$50
KeyKollectiv
Exosphere Keywalla ~$65 - 75
Binge Caps
Polar Ice Skullthulu ~$250 +
Hidden Lab
Corrupted Master - Dirty Green ~$30
Skull Trooper - Polished White ~$30
Dark Lord Helmet - Weathered ~$30
OTTO - Trans Orange ~$30
KIRA - Trans Red ~$30
AQUA - Trans Blue ~$30
Krap Shop
Judgemental Skull - White ~$50
Red Chickey ~$50
Midnight Hue Sheep ~$50
Brainy - White, Red, and Gold ~$50
Zorb
Chilly Entling ~$35 ?
Fusion Golem ~$35 ?
Carbon Goblin ~$35 ?
Katz
Teal Hype Monkey ~$40
Gloyz
Green Dragon
Hot Keys Project
Trans Green G2 ~$25
Trans Clear Trooper (red helmet) ~$25
Trans Clear Warmaster (red eyes) ~$25
Trans Brilliant Lavender ~$25
Matt3o Granite Set
2 Full Sets with different add-ons
Seems close to what I'm finding on here and Reddit. Thanks for the great response, didn't expect to get such a detailed one :thumb:
How much is an LZ-S and KMAC v1 worth these days?lz-s $800-1000
What about a Duck Mini v1,( the one with brass weights ) and a Duck Viper v1
I have been away from this money pit for too long
Looking for a price check for an LZ SK in silver.
SKs are hard to price, since they're a) rare and b) not supposed to be sold on the open market because it was a private GB. I think out of 20 made (for 12 people) 3 of them were sold outside of the original group.
I've heard over 2k for one, but I don't think that's a good representation of the actual value of the board. My personal recommendation would be to start at 1200 USD and work from there. LZ MX SE goes for about that price, so I would think SK would be similar.
My friend is selling his for 700+$. Let me know if you are interested man.Looking for a price check for an LZ SK in silver.
SKs are hard to price, since they're a) rare and b) not supposed to be sold on the open market because it was a private GB. I think out of 20 made (for 12 people) 3 of them were sold outside of the original group.
I've heard over 2k for one, but I don't think that's a good representation of the actual value of the board. My personal recommendation would be to start at 1200 USD and work from there. LZ MX SE goes for about that price, so I would think SK would be similar.
Cheers bud. I had heard about the $2k one and thought it was a bit ridiculous.
How much is an LZ-S and KMAC v1 worth these days?lz-s $800-1000
What about a Duck Mini v1,( the one with brass weights ) and a Duck Viper v1
I have been away from this money pit for too long
kmac v1 $700-800
Duck Mini V1 - $600-800
Duck Viper v1 -$450 cap
Hi - I've never sold any Artisans before... What should these fugus sell for? And if someone could tell me what that one on the bottom left is called that would be great too thanks.
(Attachment Link)
Hi - I've never sold any Artisans before... What should these fugus sell for? And if someone could tell me what that one on the bottom left is called that would be great too thanks.
(Attachment Link)
Tangerine, Onyx, Nantucket Toothues ~ $85 ea
Bottom left one is a Judgmental Skull 2.0 from Krap (username on here is Krytone) ~ $50
Golm ~ probably like $35
I assume the bottom right is from Doom? Not really sure on blanks but maybe $25
Honestly have no clue what to price any of this stuff at as I've lost invoices, have no clue what I paid, and have no clue of the rate anymore. **** tier pics for now, but better later. Disappeared, kind of been disappointed with the way things are going, so I'm probably going to sell off anything that doesn't have sentimental value. I may cast some **** for old times sake and toss it in, I have no clue.Can only help you with the clacks, but the Machine green is around 190-200, limoncello probably around 225 dunno what blue that is but prob same as limoncello unless its an f2, senutized owl 300+ and flux idk, I dont think it has been sold openly, but retail was 110 iirc.
Booper caps, all MX. I also have a blank and my matched Keywok set, but I think I'll hold onto them:Show Image(https://i.imgur.com/NaXQ9Dr.jpg)
KBK/KWK - Wrapped are BS, everything else is MX. Far right grey death lives is a prototype that does not function due to early design being off...so a non-functional collector piece.Show Image(https://i.imgur.com/nGcC6il.jpg)
Binge Hungerworks in MX - I forgot about it and it showed up out of the blue after I disappeared. I plan on holding onto my Hungrkey:Show Image(https://i.imgur.com/UOhEwV2.jpg)
ETF caps - All Topre except the 4:20 which is MX:Show Image(https://i.imgur.com/1136hAs.jpg)
Bro Caps - Gray is BS, top row is Topre (something cosmic sale on far right), bottom row is MX (galactus? on right) -Show Image(https://i.imgur.com/NX9Qwml.jpg)
Clacks - All from Clack himself. All are Topre except Flux Keypacitor:Show Image(https://i.imgur.com/QhtTY8P.jpg)
I probably have more caps lying around and definitely have a lot more other things around, including wood cases and maybe a GMK set or two.
Honestly have no clue what to price any of this stuff at as I've lost invoices, have no clue what I paid, and have no clue of the rate anymore. **** tier pics for now, but better later. Disappeared, kind of been disappointed with the way things are going, so I'm probably going to sell off anything that doesn't have sentimental value. I may cast some **** for old times sake and toss it in, I have no clue.Sorry to read this Nubbs, but good to see you're not dead.
Booper caps, all MX. I also have a blank and my matched Keywok set, but I think I'll hold onto them:Show Image(https://i.imgur.com/NaXQ9Dr.jpg)
Honestly have no clue what to price any of this stuff at as I've lost invoices, have no clue what I paid, and have no clue of the rate anymore. **** tier pics for now, but better later. Disappeared, kind of been disappointed with the way things are going, so I'm probably going to sell off anything that doesn't have sentimental value. I may cast some **** for old times sake and toss it in, I have no clue.
Booper caps, all MX. I also have a blank and my matched Keywok set, but I think I'll hold onto them:Show Image(https://i.imgur.com/NaXQ9Dr.jpg)
KBK/KWK - Wrapped are BS, everything else is MX. Far right grey death lives is a prototype that does not function due to early design being off...so a non-functional collector piece.Show Image(https://i.imgur.com/nGcC6il.jpg)
Binge Hungerworks in MX - I forgot about it and it showed up out of the blue after I disappeared. I plan on holding onto my Hungrkey:Show Image(https://i.imgur.com/UOhEwV2.jpg)
ETF caps - All Topre except the 4:20 which is MX:Show Image(https://i.imgur.com/1136hAs.jpg)
Bro Caps - Gray is BS, top row is Topre (something cosmic sale on far right), bottom row is MX (galactus? on right) -Show Image(https://i.imgur.com/NX9Qwml.jpg)
Clacks - All from Clack himself. All are Topre except Flux Keypacitor:Show Image(https://i.imgur.com/QhtTY8P.jpg)
I probably have more caps lying around and definitely have a lot more other things around, including wood cases and maybe a GMK set or two.
Clacks - All from Clack himself. All are Topre except Flux Keypacitor:Show Image(https://i.imgur.com/QhtTY8P.jpg)
I probably have more caps lying around and definitely have a lot more other things around, including wood cases and maybe a GMK set or two.
Honestly have no clue what to price any of this stuff at as I've lost invoices, have no clue what I paid, and have no clue of the rate anymore. **** tier pics for now, but better later. Disappeared, kind of been disappointed with the way things are going, so I'm probably going to sell off anything that doesn't have sentimental value. I may cast some **** for old times sake and toss it in, I have no clue.
Booper caps, all MX. I also have a blank and my matched Keywok set, but I think I'll hold onto them:Show Image(https://i.imgur.com/NaXQ9Dr.jpg)
KBK/KWK - Wrapped are BS, everything else is MX. Far right grey death lives is a prototype that does not function due to early design being off...so a non-functional collector piece.Show Image(https://i.imgur.com/nGcC6il.jpg)
Binge Hungerworks in MX - I forgot about it and it showed up out of the blue after I disappeared. I plan on holding onto my Hungrkey:Show Image(https://i.imgur.com/UOhEwV2.jpg)
ETF caps - All Topre except the 4:20 which is MX:Show Image(https://i.imgur.com/1136hAs.jpg)
Bro Caps - Gray is BS, top row is Topre (something cosmic sale on far right), bottom row is MX (galactus? on right) -Show Image(https://i.imgur.com/NX9Qwml.jpg)
Clacks - All from Clack himself. All are Topre except Flux Keypacitor:Show Image(https://i.imgur.com/QhtTY8P.jpg)
I probably have more caps lying around and definitely have a lot more other things around, including wood cases and maybe a GMK set or two.
How much does the Symbiosis base set (TKL) + WASD add-on set go for?
MoreHonestly have no clue what to price any of this stuff at as I've lost invoices, have no clue what I paid, and have no clue of the rate anymore. **** tier pics for now, but better later. Disappeared, kind of been disappointed with the way things are going, so I'm probably going to sell off anything that doesn't have sentimental value. I may cast some **** for old times sake and toss it in, I have no clue.
Booper caps, all MX. I also have a blank and my matched Keywok set, but I think I'll hold onto them:Show Image(https://i.imgur.com/NaXQ9Dr.jpg)
KBK/KWK - Wrapped are BS, everything else is MX. Far right grey death lives is a prototype that does not function due to early design being off...so a non-functional collector piece.Show Image(https://i.imgur.com/nGcC6il.jpg)
Binge Hungerworks in MX - I forgot about it and it showed up out of the blue after I disappeared. I plan on holding onto my Hungrkey:Show Image(https://i.imgur.com/UOhEwV2.jpg)
ETF caps - All Topre except the 4:20 which is MX:Show Image(https://i.imgur.com/1136hAs.jpg)
Bro Caps - Gray is BS, top row is Topre (something cosmic sale on far right), bottom row is MX (galactus? on right) -Show Image(https://i.imgur.com/NX9Qwml.jpg)
Clacks - All from Clack himself. All are Topre except Flux Keypacitor:Show Image(https://i.imgur.com/QhtTY8P.jpg)
I probably have more caps lying around and definitely have a lot more other things around, including wood cases and maybe a GMK set or two.
Hey Nubb, I'm sad I wasn't around when you were but I'll gladly help with the pricing if I can. Feel free to listen to others over me, this is going off memory!MoreBooper -
Lilith: $100
Monkey: $150
Cosmo: $350
KWK/KBK -
Wrapped: last I saw this sell for was at $200 over a year ago, so that one is with many grains of salt
Mummy II: $450
Warus: Probably around $250?
Death Lives: Arm and a leg
Binge -
Earl ESC: $60
ETF -
Hexter's Notion I: $100
Golemfish: $80
420: rare as ****, if you're selling this it will go for a pretty penny
Puppet Masters: ~$50 each
Bro (less versed here) -
BS Reaper Classic: ~$80?
Cherokees: ~$60?
Interstellar Purple Bot: $300
Galactus Bot: $250
Black Rustler: $65
Clack (also less versed here) -
Gumrot?: $250?
Limoncello?: $200?
Teal?: $175?
Keypacitor: literally anything
Let me know if you need help with more! I'd love to assist with research on whatever I can. Also, anyone else please feel free to correct me on anything, I'd love to fix my errors!!
<3 Mangoes
Looking for a price check on a assembled Octagon V1 blue grey keyboard with 65g zealio switches and cherry blue pbt keycaps. Haven't been using it as much as i was hoping for and looking to give it a new home. When i get the chance for some daylight lighting (im such a night owl), i'll try to post some pictures. Thanks
Looking for a price check on a assembled Octagon V1 blue grey keyboard with 65g zealio switches and cherry blue pbt keycaps. Haven't been using it as much as i was hoping for and looking to give it a new home. When i get the chance for some daylight lighting (im such a night owl), i'll try to post some pictures. Thanks
600-700
Looking for a price check on a assembled Octagon V1 blue grey keyboard with 65g zealio switches and cherry blue pbt keycaps. Haven't been using it as much as i was hoping for and looking to give it a new home. When i get the chance for some daylight lighting (im such a night owl), i'll try to post some pictures. Thanks
Looking for a price check on a assembled Octagon V1 blue grey keyboard with 65g zealio switches and cherry blue pbt keycaps. Haven't been using it as much as i was hoping for and looking to give it a new home. When i get the chance for some daylight lighting (im such a night owl), i'll try to post some pictures. Thanks
I got mine for $500, so there's that "outlier". Don't be surprised if you have to lower the price a bit! :) Make its next owner happy, perhaps.
I’ve gotten rid of most of my keyboard stuff. Other things in life are too expensive to entertain this kind of luxury item.
I’ve had this GON KIttypad for several years. I know they go for $210 new but I don't know what lead time for shipping costs.
Also, this BBv2 is from the Blackout Sale three years ago, one of the last high-end caps I have. It's the “Bloodshot V2”
A clue on what these are worth would be very handy, thanks guys.
The insert image isnt working, sorry about just links.
https://ctrlalt.io/bro-caps/blackout
https://imgur.com/CarArOc
https://imgur.com/s3qLXwz
https://imgur.com/Zp1KDHl
https://imgur.com/y0rkW7c
https://imgur.com/7b8qIY8
https://imgur.com/hE8RzZR
https://imgur.com/Nql6R7V
https://imgur.com/nH8rVJF
How about a Acid Reflux Reaper v1 TMX?
I haven't found a thread with one being sold.
Wonder what these items would be worth:
GMK Skidata+
Base set + 1 pack spacebars.
https://geekhack.org/index.php?topic=76521.0
SA retro
True retro, Number pad, pro mods, lime extensions, ISO extensions, INT DE-NO-SE, SMall spacebars, Blanks.
https://ctrlalt.io/buys/sa-retro
Tai Hao ANSI Dolch + addon pack.
https://geekhack.org/index.php?topic=58110.0
PBT dye sub key-cap set.
complete set without damage. minor scratches on the spacebar.
Price on a set of 55g domes from an 87u 55g?
hi! what about this?Im going to say around the 400€ mark. Prelim has a similar set priced at 500€ and it hasn´t sold yet, but I think the price is around there or a bit under! Nice looking set btw :)
Olivetti KBD 2812 double shot spanish layout:Show Image(https://image.ibb.co/gohGoS/IMG_20180306_145730645.jpg)Show Image(https://image.ibb.co/eWcGoS/IMG_20180306_152324642.jpg)Show Image(https://image.ibb.co/cn2Sv7/IMG_20180306_145741955.jpg)Show Image(https://image.ibb.co/iwZkhn/IMG_20180306_145644620.jpg)
Nice looking set btw :):D Maybe I will sell it in the future, for the time being I enjoy it :thumb:
How much should I expect to pay for a used HHKB pro 2 white (blank or printed caps) in CAD? Trying to negotiate a deal with someone who's HHKB has a bit of yellowing around the seam.I'd say around 180 usd ≈ 234 CaD I believe :)
How much should I expect to pay for a used HHKB pro 2 white (blank or printed caps) in CAD? Trying to negotiate a deal with someone who's HHKB has a bit of yellowing around the seam.I'd say around 180 usd ≈ 234 CaD I believe :)
Interested to know what people are paying for a 107-key 4704 keyboard (capacitive BS) in "very good" condition including the rear riser foot, but absent of the foam sheet.Really nice to see you here! Complete ones in unrestored condition tend to hover around 250-300 usd, last i heard.
Interested to know what people are paying for a 107-key 4704 keyboard (capacitive BS) in "very good" condition including the rear riser foot, but absent of the foam sheet.Really nice to see you here! Complete ones in unrestored condition tend to hover around 250-300 usd, last i heard.
Best of luck! if you ever decide to sell one of your namesakes, my interest is piqued ;)Interested to know what people are paying for a 107-key 4704 keyboard (capacitive BS) in "very good" condition including the rear riser foot, but absent of the foam sheet.Really nice to see you here! Complete ones in unrestored condition tend to hover around 250-300 usd, last i heard.
Thanks, I do still exist, kind of :)
Really...that's good money. I'm looking at cutting down to just the essentials (space issues, keyboards do not make for a small collection) and this is one of the boards on the chopping block.
That, and a couple others, but I'm more confident in the value of the others.
How much should I expect to pay for a Revo One (case only) in pink?
hi! what about this?Im going to say around the 400€ mark. Prelim has a similar set priced at 500€ and it hasn´t sold yet, but I think the price is around there or a bit under! Nice looking set btw :)
Olivetti KBD 2812 double shot spanish layout:Show Image(https://image.ibb.co/gohGoS/IMG_20180306_145730645.jpg)Show Image(https://image.ibb.co/eWcGoS/IMG_20180306_152324642.jpg)Show Image(https://image.ibb.co/cn2Sv7/IMG_20180306_145741955.jpg)Show Image(https://image.ibb.co/iwZkhn/IMG_20180306_145644620.jpg)
Purple Rf Sliders + rf rings + rf stabs + rf stab rings - full set for an HHKB
Purple Rf Sliders + rf rings + rf stabs + rf stab rings - full set for an HHKB
$1 a pop (pop = slider + ring), same for stab + ring.
Going rate for a black HHKB Pro 2 with 55g RF domes, hypersphere silencing rings and hasu controller? All in good condition.$350 OBO I'd say. No more than 400, because of all the other options in the market.
Yh around 350-400 seems like a reasonable number!Going rate for a black HHKB Pro 2 with 55g RF domes, hypersphere silencing rings and hasu controller? All in good condition.$350 OBO I'd say. No more than 400, because of all the other options in the market.
Sent from my mobile using Tapatalk
How much can I expect for a Zenith Z-150 AT version, with linear green alps, in very clean condition and no shine on the double shots keycaps? The keyboard is in good working condition with all keys tested, but as Chyros demonstrated in his recent video, only works with a PS/2 port. The problem is that I am located in Hong Kong and shipping to other parts of the world would be a bit expensive (I believe, but have not really checked).
How much can I expect for a Zenith Z-150 AT version, with linear green alps, in very clean condition and no shine on the double shots keycaps? The keyboard is in good working condition with all keys tested, but as Chyros demonstrated in his recent video, only works with a PS/2 port. The problem is that I am located in Hong Kong and shipping to other parts of the world would be a bit expensive (I believe, but have not really checked).
I'm not sure about current market but they typically used to go for around $80 on eBay.
price check on this fugu:
https://i.imgur.com/oe2Rt6y.jpg
https://i.imgur.com/nA3eoFW.jpg
was offered it at 120 and that's a bit too much for me to casually say yes since i'm just getting started collecting.
How much for a GMK Skeletor in pristine condition? Thanks.180 tops. But I've seen them sell for lower as well.
How much would a used ESA-3000-HASRO sell for?I already informed this user, but it highly depends on how used and the condition of each component. The HASRO is a collectible, and the caps are sought after, but the highest price buyers often want BNIB.
I have a turquoise GasMask from a few years back. Anyone know what it would be worth?Gas Masks have been hanging around the 15-30 range nowadays.
Thank you.How much for a GMK Skeletor in pristine condition? Thanks.180 tops. But I've seen them sell for lower as well.
I have a turquoise GasMask from a few years back. Anyone know what it would be worth?Gas Masks have been hanging around the 15-30 range nowadays.
Sent from my mobile using Tapatalk
- Topre Realforce 87u 55g (white) - lightly used with a custom Pexon PC cable
- Vortex Aluminum TKL Case - unused
- Like New Bolt-Modded 1391401 Model M
What kind of price would be reasonable for a translucent yellow KRAP skull? Don't have a picture at the moment, but I'm more curious than anything as I don't plan on selling it right now.
How about a Ash Slurp Artisan?
I'm wondering about the values on Shishis. Do prices between colorways vary a ton? I'm just getting into artisans and I really really REALLY like the shishi sculpt lol. I have won one of the JAK raffles so far so I doubt I would be able to trade for anything yet but I so want to get a shishi at some point in the distant future.
Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) :rolleyes: And english isn't my languauge :))
How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?
It has Cherry logos inside and those black Cherry switches and TA logo back on it.Show Image(https://s9.postimg.org/h9rflt4hb/image.jpg)Show Image(https://s9.postimg.org/hmits4k7z/image.jpg)Show Image(https://s9.postimg.org/rxv6k9omn/image.jpg)Show Image(https://s9.postimg.org/xm1hb7qf3/image.jpg)Show Image(https://s9.postimg.org/595zksezj/image.jpg)
It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.
What would be a reasonable price for a pristine condition Siig Minitouch with SMK second generation Monterey blue switches? Thanks for your information.
How much would 69 linear green alps switches be worth? Bought them forever ago and never did anything with them so I am prob just going to get rid of them.
TGR Jane r1 Ti Gray.
TGR Jane r1 Ti Gray.
TGR Jane r1 Ti Gray.
x2 eternal souls
TGR Jane r1 Ti Gray.
My love
Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) :rolleyes: And english isn't my languauge :))
How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?
It has Cherry logos inside and those black Cherry switches and TA logo back on it.Show Image(https://s9.postimg.org/h9rflt4hb/image.jpg)Show Image(https://s9.postimg.org/hmits4k7z/image.jpg)Show Image(https://s9.postimg.org/rxv6k9omn/image.jpg)Show Image(https://s9.postimg.org/xm1hb7qf3/image.jpg)Show Image(https://s9.postimg.org/595zksezj/image.jpg)
It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.
Hello and very first sorry about these horrible pictures because my phone lens is broken(I'll take better ones when get real camera) :rolleyes: And english isn't my languauge :))
How can i be sure if this is real Triumph Adler G81-3000 and of course what's it worth?
It has Cherry logos inside and those black Cherry switches and TA logo back on it.Show Image(https://s9.postimg.org/h9rflt4hb/image.jpg)Show Image(https://s9.postimg.org/hmits4k7z/image.jpg)Show Image(https://s9.postimg.org/rxv6k9omn/image.jpg)Show Image(https://s9.postimg.org/xm1hb7qf3/image.jpg)Show Image(https://s9.postimg.org/595zksezj/image.jpg)
It is in mint condition but has big problem. Someone have murdered the wire. Is there any solution to fix it again.
Fixed that wire problem now and writing actually this message with this keyboard and works perfectly :cool:
Still no better pics...
How much would 69 linear green alps switches be worth? Bought them forever ago and never did anything with them so I am prob just going to get rid of them.
What’s an unused brand new LZ-GH kit worth? It’s been years since I got it in the first group buy and I haven’t had time to put it together.
What would this be worth?
Realforce 87u Anniversary Edition with Blue and Grey keycaps, modified with 55g domes and silenced sliders from a silenced 87u, in a Digilog case. However, 2 of the domes don't work (don't think I put it together correctly), and I stripped one of the hex screws on the digilog case so I can't open it to fix.
b-b-b-but it's the original!! XDHeh. You're not wrong, but why charge more? I'd rather sell it at cost, and make the next owner happy.
PC on Booper! cosmonaut F2s?The market varies a lot on them, and they often are traded as well. I know of an F2 that sold for around 60, but frankly, there could be higher offers. I cannot pinpoint a price, as many dealings also occur privately as they move between owners.Show Image(https://i.imgur.com/Zkn1IaR.jpg)
Price check on a LZ SQ + aditionnal plate and PCB?Last I saw one sell, it sold at 800.
PC on Booper! cosmonaut F2s?The market varies a lot on them, and they often are traded as well. I know of an F2 that sold for around 60, but frankly, there could be higher offers. I cannot pinpoint a price, as many dealings also occur privately as they move between owners.Show Image(https://i.imgur.com/Zkn1IaR.jpg)
Sent from my mobile using Tapatalk
Chuck them on the 'bay?Please no.
That's what they did with the last set of charity caps!Chuck them on the 'bay?Please no.
Sent from my mobile using Tapatalk
Chuck them on the 'bay?Please no.
Sent from my mobile using Tapatalk
I see. I understand. Thanks for the info. Best wishes!Chuck them on the 'bay?Please no.
Sent from my mobile using Tapatalk
He's trying to raise funds for treatment of his ill niece so I think it's fully justified to auction them.
Any price tag on ur mam?3.50
Anyone have a price estimate for a MX Gummyrot Green Gumrot (Ogre clack)?
Anyone have a price estimate for a MX Gummyrot Green Gumrot (Ogre clack)?
There's a Clack Valuation Thread as well!
I haven't seen a public sale on them recently, but I would say that current valuations may range from 250 all the way to 350 or so, at the most expensive end.
Hiya, curious about some older LZs.
LZ-SE (84)
LZ-RE
LZ-S
TIA :)
Hiya, curious about some older LZs.
LZ-SE (84)
LZ-RE
LZ-S
TIA :)
feetless LZ SE is like 2.5k
LZ RE like 900
LZ-S... one went for 300 a few weeks back, if you can find one i imagine it would be closer to the 500-600 range, depends on color and damage
What's the going rate for an original Round 4 SPH full set w/ the error fix set also included?
What was retail + shipping for these XDA Canvas sets / What is a fair price to pay now?
Alphas
Text Modifiers
Numpad
Bauhaus Text Modifiers
Wozniak Kit
What's the going rate for an original Round 4 SPH full set w/ the error fix set also included?
Depends on how many caps you have - which layouts they cover. I would say they are in the $200 range and up, depending on kits, once again.
What's the going rate for an original Round 4 SPH full set w/ the error fix set also included?
Depends on how many caps you have - which layouts they cover. I would say they are in the $200 range and up, depending on kits, once again.
Here's a photo showing the entire set. https://imgur.com/4QIgD16 (https://imgur.com/4QIgD16) The fixes that came w/ Round 5 were: SHIFT225, SHIFT275, RETURN225, TAB150, BACKSPACE200. What do you think? Thanks again :thumb:
Anyone know current value of this?Ur mamMoreMoreShow Image(https://www.dailydot.com/wp-content/uploads/58f/21/a1f0a821cded1a9e33f605091f0766f8.jpg)
Anyone know current value of this?MoreMoreShow Image(https://www.dailydot.com/wp-content/uploads/58f/21/a1f0a821cded1a9e33f605091f0766f8.jpg)
How much is a used poker2 and Enjoypbt yapanese keyset worth?No more than MSRP, if not less.
Just acquired this old TA Royal 41010-20€
(Attachment Link)
Caps fit cherry stems and spacing. I can't see how much they usually go for.
I'd appreciate a price check on the following stuff. Not sure if I'll sell any of it, but would be good to know what recent prices have been:
356mini v1 - Black
FJELL - Dark gray, brass insert
EXENT - Black, brass plate
Revo RJ - Dark gray (I expect at the GB price, just curious if people know of recent sales) - most sales have been at GBish price
Dolphin Rev 2 - Black & Gray
OTD SoWare (DCS)
Black 356mini in mint condition is around $2,000, last one sold with a dent for $1300, so around there. Agree with the restI'd appreciate a price check on the following stuff. Not sure if I'll sell any of it, but would be good to know what recent prices have been:
356mini v1 - Black
FJELL - Dark gray, brass insert
EXENT - Black, brass plate
Revo RJ - Dark gray (I expect at the GB price, just curious if people know of recent sales) - most sales have been at GBish price
Dolphin Rev 2 - Black & Gray
OTD SoWare (DCS)
356mini v1 - Black - $1.2k-1.5k
FJELL - Dark gray, brass insert - $450ish
EXENT - Black, brass plate - $GBish price?
Revo RJ - Dark gray (I expect at the GB price, just curious if people know of recent sales) - most sales have been at GBish price
Dolphin Rev 2 - Black & Gray - $650ish
OTD SoWare (DCS) - $130-150
Black 356mini in mint condition is around $2,000
Black 356mini in mint condition is around $2,000
What the hell? I just looked it up and it looks like every single other 60% keyboard I've ever seen. Is the case made of adamantite or something?
Black 356mini in mint condition is around $2,000
What the hell? I just looked it up and it looks like every single other 60% keyboard I've ever seen. Is the case made of adamantite or something?
I'd appreciate a price check on the following stuff. Not sure if I'll sell any of it, but would be good to know what recent prices have been:Sup pirate bro.
356mini v1 - Black
FJELL - Dark gray, brass insert
EXENT - Black, brass plate
Revo RJ - Dark gray (I expect at the GB price, just curious if people know of recent sales)
Dolphin Rev 2 - Black & Gray
OTD SoWare (DCS)
So I'm looking to possibly sell some of my keyboard related stuff. I currently have these:
- Deep Space DSA set with a decent amount of blanks
- Matching Booper Cosmonaut artisan cap
- CM Storm Switch tester
Pictures: https://imgur.com/a/Q5UqO3q (https://imgur.com/a/Q5UqO3q)
Would there be any interest in this stuff and what would the value look like?
I have a brand new M65-A Space grey with Nylon bottom i think someone else will enjoy it more then me..
Whats the current price on this board? :rolleyes:
Curious as to what these are worth. Not sure who made them or when I picked them up. The white keycap is 3d printed and not as dirty as it looks in the photo but there is some discoloration. The green heart keycap glows in the dark.Show Image(https://i.imgur.com/28lb4vh.jpg?2)Show Image(https://i.imgur.com/TJLuiH5.jpg?2)Show Image(https://i.imgur.com/IXaJsIP.jpg?2)
The Nubbinator heart is worth something to some people.
Are those double shot caps with clear outer plastic?
The Nubbinator heart is worth something to some people.
So vague :))Are those double shot caps with clear outer plastic?
Yes
Curious as to what these are worth. Not sure who made them or when I picked them up. The white keycap is 3d printed and not as dirty as it looks in the photo but there is some discoloration. The green heart keycap glows in the dark.The geekhack keys were like $10Show Image(https://i.imgur.com/28lb4vh.jpg?2)Show Image(https://i.imgur.com/TJLuiH5.jpg?2)Show Image(https://i.imgur.com/IXaJsIP.jpg?2)
The Nubbinator heart is worth something to some people.So vague :))
Looking for prices on the below. Anyone got any idea? Need to sell this stuff.
N5 Nightstalker w/ ID
Pale Blue Reaper w/ID
Jolly Roger w/ID
White Ergodox EZ with Wrist Rests and Tent Kit
GMK Hydro
GMK Hyperfuse
GMK Triumph Adler
GMK Electric Blugaloo
Looking for prices on the below. Anyone got any idea? Need to sell this stuff.
N5 Nightstalker w/ ID
Pale Blue Reaper w/ID
Jolly Roger w/ID
White Ergodox EZ with Wrist Rests and Tent Kit
GMK Hydro
GMK Hyperfuse
GMK Triumph Adler
GMK Electric Blugaloo
Can't ID much of the artisans or Ergodox, but for the rest:
GMK Hydro $170-190 depending on use.
GMK Hyperfuse $160-175 depending on use.
GMK Triumph Adler $100-105
GMK Electric Bluegaloo $55
Looking for prices on the below. Anyone got any idea? Need to sell this stuff.
N5 Nightstalker w/ ID
Pale Blue Reaper w/ID
Jolly Roger w/ID
White Ergodox EZ with Wrist Rests and Tent Kit
GMK Hydro
GMK Hyperfuse
GMK Triumph Adler
GMK Electric Blugaloo
Can't ID much of the artisans or Ergodox, but for the rest:
GMK Hydro $170-190 depending on use.
GMK Hyperfuse $160-175 depending on use.
GMK Triumph Adler $100-105
GMK Electric Bluegaloo $55
N5 and Roger would be retail, no?
Looking for prices on the below. Anyone got any idea? Need to sell this stuff.
N5 Nightstalker w/ ID
Pale Blue Reaper w/ID
Jolly Roger w/ID
White Ergodox EZ with Wrist Rests and Tent Kit
GMK Hydro
GMK Hyperfuse
GMK Triumph Adler
GMK Electric Blugaloo
Can't ID much of the artisans or Ergodox, but for the rest:
GMK Hydro $170-190 depending on use.
GMK Hyperfuse $160-175 depending on use.
GMK Triumph Adler $100-105
GMK Electric Bluegaloo $55
N5 and Roger would be retail, no?
Yeah, I'd agree.
Of course. I wouldn't mark them up. I just don't recall what I paid for them. I need to go hunt down the original prices. Wasn't sure if someone had them handy.
Also considering selling a KMAC 1.2 - Titanium Color w/ Ergo Clear. Any idea what I should list it at?
Of course. I wouldn't mark them up. I just don't recall what I paid for them. I need to go hunt down the original prices. Wasn't sure if someone had them handy.
Also considering selling a KMAC 1.2 - Titanium Color w/ Ergo Clear. Any idea what I should list it at?
Original price on N5 Nightstalker was $48
Jolly Rogers were $38-42.
As for the KMAC, it depends. Condition? WKL/WK? There's been one sitting for $700 for a long time unsold, so I would say below that. $500-650 all in that range depending.
I have some keys from a PMK Grab Bag from March 2016. In addition to the many random caps, there are some partial keysets that include:
SA Dangerous Minds
SA Carbon
SA Danger Zone
SA Jukebox
Low Profile (G20 Stealth?)
Would love any advice on prices for the main bag at as well as the mini bags of partial keysets.
SA Jukebox-Show Image(https://i.imgur.com/2sXOGE9.jpg)
SA Troubled Minds-Show Image(https://i.imgur.com/v87aDh1.jpg)
SA Carbon-Show Image(https://i.imgur.com/FzEp8lu.jpg)
SA Danger Zone-Show Image(https://i.imgur.com/VRP3DSu.jpg)
Low Profile Keys-Show Image(https://i.imgur.com/vVnLPCp.jpg)
The rest of the Grab Bag-Show Image(https://i.imgur.com/Einx00D.jpg?1)
Really curious on how much a half-plate Koala goes for nowadays...
Prices for OTD boards have gone loony :rolleyes:
Really curious on how much a half-plate Koala goes for nowadays...
Prices for OTD boards have gone loony ::)
Retail.
Really curious on how much a half-plate Koala goes for nowadays...
Prices for OTD boards have gone loony :rolleyes:
Retail.
troubled minds base kit?Given that there was just an R2 run, it probably has devalued a lot. I wouldn't do more than 150
not really getting any interesting trades maybe will just end up selling it :\
troubled minds base kit?Given that there was just an R2 run, it probably has devalued a lot. I wouldn't do more than 150
not really getting any interesting trades maybe will just end up selling it :\
Sent from my mobile using Tapatalk
Before? Anywhere from 200 and 250. Some sales around 270-80 with novelties.troubled minds base kit?Given that there was just an R2 run, it probably has devalued a lot. I wouldn't do more than 150
not really getting any interesting trades maybe will just end up selling it :\
Sent from my mobile using Tapatalk
What was the price before that? I know there's another round happening, but about a year ago I recall prices being ridiculous.
EDIT: I am not looking to sell by the way. I don't know if that's allowed here. I just want to know values if something happens and I absolutely have to.
A basically unused GMK Carbon set?
Black Duck Eagle v2500 for Eagle
White Widow Shishi, Mayhem, spook
Black Duck Eagle v2500 for Eagle
White Widow Shishi, Mayhem, spook
Shishi, Mayhem, and Spook values haven't quite been stable. It's too soon.
Sent from my mobile using Tapatalk
Black Duck Eagle v2500 for Eagle
White Widow Shishi, Mayhem, spook
Shishi, Mayhem, and Spook values haven't quite been stable. It's too soon.
Sent from my mobile using Tapatalk
Wanted to know the same actually
Would say that 500 is for a mint condition Eagle or an average one and is there a difference between it built vs the kit ?
Thanks
That one hasn't moved for monthsBlack Duck Eagle v2500 for Eagle
White Widow Shishi, Mayhem, spook
Shishi, Mayhem, and Spook values haven't quite been stable. It's too soon.
Sent from my mobile using Tapatalk
Wanted to know the same actually
Would say that 500 is for a mint condition Eagle or an average one and is there a difference between it built vs the kit ?
Thanks
Even a built one in excellent condition is around $500. Kit or not, I think that's the current price aftermarket. There's one on the Classifieds being sold for $700, but I fear that won't move for a long while.
Black Duck Eagle v2500 for Eagle
White Widow Shishi, Mayhem, spook
Shishi, Mayhem, and Spook values haven't quite been stable. It's too soon.
Sent from my mobile using Tapatalk
Wanted to know the same actually
Would say that 500 is for a mint condition Eagle or an average one and is there a difference between it built vs the kit ?
Thanks
Even a built one in excellent condition is around $500. Kit or not, I think that's the current price aftermarket. There's one on the Classifieds being sold for $700, but I fear that won't move for a long while.
How much would either of these sell for?
Duck Viper V2
TX-CP
Hey guys, Can I get a price check on a set of UK OG Cherry PBT Dyesub keycaps? They all appear to be in great condition.
Hey guys, Can I get a price check on a set of UK OG Cherry PBT Dyesub keycaps? They all appear to be in great condition.
Pics will help, but for ISO-UK, I'd say 150-180.
Hey, how much more used keysets are reduced in price? Like maxkeys keycap sets with shine? Sorry if this is the wrong place to ask :)Depends, but I'd say 75-80% retail price would be the top price you should charge.
hey guys, i have a never used GMK monkey and skidata sets, as well as SA penumbra/solarized (the first GB, never left bag), wondering how much i could get for them (looking to get at least what i paid)
thanks
How much is a KachaKeys Gojira in Godspeed colorway worth?
What's the going rate for Irish PBT from the Round 2 buy (https://geekhack.org/index.php?topic=43328.0)?About three fiddy
What's the going rate for Irish PBT from the Round 2 buy (https://geekhack.org/index.php?topic=43328.0)?
What's the going rate for Irish PBT from the Round 2 buy (https://geekhack.org/index.php?topic=43328.0)?As someone who likes dyesubs, I'd say the very highest would be 180. Going rate would be lower than that, around 150. What's its compatibility?
55g 87U silenced with purple sliders and lubed?Max $300.
Titanium left/right shift, 7x 1.25u modifiers, 6.25 spacebar?At cost. There hasn't been demand for them really in these years.
from old feng groupbuy back in 2013 https://geekhack.org/index.php?topic=44123.0
keys are in mint condition.
What's a Novatouch with 55g RF domes, purple sliders, lubed stabs going for these days?250-300
What would a fair price for an SSK with a dodgy ESC and arrow key (probably just needs a bolt mod or spring resetting but too lazy).150 or less
Fair price for geekhack?
Couldn't find any prior trades/ sales of the rosekey koi spacebar. Understandable if there isn't a set "worth", just wanted input on what people think a fair trade/ price would be for a 1/5 raffle spacebar. It's SA profile 6.25U
r/r/r cheat, vintage blacks?Cheats seem to be all over the place depending on specifics, vintage blacks, for me personally $0.25/each but others will pay more.
I have a never opened set of IMSTO PBT 4 Apple keycaps from this GB
https://geekhack.org/index.php?topic=66550.0
r/r/r cheat, vintage blacks?Cheats seem to be all over the place depending on specifics, vintage blacks, for me personally $0.25/each but others will pay more.
Also you need to check this
https://geekhack.org/index.php?topic=38471.msg2642120.msg#2642120
Sent from my SM-G930V using Tapatalk
Thoughts on how much these old Bro Caps are worth?
* Patriotic Reaper v1 & BroBot v2 (MX)
* Pharaoh Reaper v1
There's no Patriotic afaik, so it's Patriot.Thoughts on how much these old Bro Caps are worth?
* Patriotic Reaper v1 & BroBot v2 (MX)
* Pharaoh Reaper v1
Patriot or Patriotic? I traded a set of reaper v1 + bbv2 for something worth about $300~
Anyone know what the original Gasmasks (Topre) are now worth? Have a light yellow, light blue, light green, and green with ruby eyes.
How about a Hammer Lagoon Spacebar, 6U Topre?
Hey all,
i bought a bunch of stuff in group buys a while ago and thinking of offloading some of it. I'd appreciate an opinion of price re: the following.
1. Duck Viper v1 black kit (soz Elton for the logistical PIA that was this order) - Still sealed in original box. Proof of purchase here; https://docs.google.com/spreadsheets/d/19vMEs1AwOqs0sf_sVm-6kBtOymPBKC8cQ9Q99k-V2Ps/pub?single=true&gid=1&output=html (search my username to see the entry)
2. Complete unused GMK dolch (Base set + colour pack) - ran by IvanIvanvich or someone like that.
3. Sprit 60% faceW pcb unused + 2 bags 65g gold springs + 2 bags 62g gold springs
4. Complete PCB with black cherry switches (part of IVAN GMK DOLCH GB)
5. Unused Gateron black switches and separate colourless upper switch housing (looking for price per switch/ switch housing) - honestly can't remember organiser.
Bought from elsewhere:
6. Full set of vortex blank PBT caps (black)
7. Massdrop Granite caps unused (Common kit + 2 7U spacebars + red/blue enter & esc caps + Text mod set + Text pro set)
8. Knockoff Hammer 60% case - from Feng(?) - looks to be cast metal & painted silver
As an aside are there any time-related deteriorations that might occur with respect to PCBs? Don't want to sell an untested pcb that runs out to be useless.
Once again appreciate any opinions that are offered.
How much KMAC2 right now ?
Duck Viper v1 - last one I saw sold for around $300. Value up to $400 tops
GMK Dolch - depends on compatibility, has gone for $120-$160
SPRiT 60% PCB - $40
each bag of springs - $8
PCB with black cherry switches - price of PCB + a little more
Gateron Black switches - price per switch = $0.20-$0.25
Granite - all of it around $140-150 tops
Knockoff Hammer case - have seen them go between $80-$110
And you should test your PCB. No deteriorations should occur unless you spilled something or left it somewhere grimy.
Have this set of OriginativeCO 60% Cyrillic I decided to not keep (TKL fan). What's it worth? Probably just gonna list it here.
(http://i.imgur.com/A7si4bum.jpg) (https://imgur.com/A7si4bu)
Are these PBT Modern Beige? Not much honestly. The limit in compatibility makes me say it'd only be about $50 or less.Show ImageShow ImageHave this set of OriginativeCO 60% Cyrillic I decided to not keep (TKL fan). What's it worth? Probably just gonna list it here.
(http://i.imgur.com/A7si4bum.jpg) (https://imgur.com/A7si4bu)
(http://i.imgur.com/3hpEiq1m.jpg) (https://imgur.com/3hpEiq1)
(http://i.imgur.com/nNCDzHMm.jpg) (https://imgur.com/nNCDzHM)
The brand at the time in 2016 was "MOD Keyboard". OCO already purged their site of the keycaps and I can't find any other information about it. Called "60% Cyrillic - Black / Red Sub".
Anyone know how much a base set of GMK Oblivion Greys would cost?
PC: My dignity.About -$1.89 before tax
IBM 50 key 4704The Model F family, especially the 4704 family is soaring in prices. Wouldn't be surprised if this one goes for $300+
(Not mine)Show Image(https://thumbs.worthpoint.com/zoom/images1/1/0416/04/ibm-4704-50-key-model-mechanical_1_c74ffe4cba1423891fda07e1310dc80c.jpg)
IBM 50 key 4704
(Not mine)Show Image(https://thumbs.worthpoint.com/zoom/images1/1/0416/04/ibm-4704-50-key-model-mechanical_1_c74ffe4cba1423891fda07e1310dc80c.jpg)
Couple things to price check:
Sets
GMK Hyperfuse keyset (original geekhack group buy) new/unused - $170-180
GMK Triumph Adler (original geekhack group buy) new/unused - $100-120
Caps: -- whatever you paid for in retail
Hidden Lab Aqua War Begins
Hidden Lab Aqua Revenge
Hidden Lab Kira
Hidden Lab Otto
Hidden Lab Ninja
Hidden Lab Flash
Unused Gateron clear switches. - $0.20 per switch
Thanks!
Couple things to price check:
Sets
GMK Hyperfuse keyset (original geekhack group buy) new/unused - $170-180
GMK Triumph Adler (original geekhack group buy) new/unused - $100-120
Caps: -- whatever you paid for in retail
Hidden Lab Aqua War Begins
Hidden Lab Aqua Revenge
Hidden Lab Kira
Hidden Lab Otto
Hidden Lab Ninja
Hidden Lab Flash
Unused Gateron clear switches. - $0.20 per switch
Thanks!
Filled in with my thoughts on prices.
Price check on a MX GB (Mexican) Fugu?
Got some caps that don't fit my boards, all MX unless marked otherwise. Can't find invoices, anyone know what they went for?
Binge Danq Eyed Slo-fi
Booper - Cerulean Cosmonaut
Booper x KK - X15 Kosmonavt
Clack F2 Conduit grey skull
Suited Up - Covalent Keybuto
Bro:
Sapphire BBv2
Skoll Lycan
Toothache Grumpkin
Wicked Plum(?) Grumpkin
Brototype Vlad (Orange, Topre)
Quite fresh to these forums on the heels of buying my first board and looking to now sell realizing how daunting the build is.
RAMA M65-A - Space Grey w/Nylon Base
PCB & Brass Plate Upgrade.
Unbuilt and brand new in box.
Any information on a price for this would be greatly appreciated!
Quite fresh to these forums on the heels of buying my first board and looking to now sell realizing how daunting the build is.
RAMA M65-A - Space Grey w/Nylon Base
PCB & Brass Plate Upgrade.
Unbuilt and brand new in box.
Any information on a price for this would be greatly appreciated!
Quite fresh to these forums on the heels of buying my first board and looking to now sell realizing how daunting the build is.
RAMA M65-A - Space Grey w/Nylon Base
PCB & Brass Plate Upgrade.
Unbuilt and brand new in box.
Any information on a price for this would be greatly appreciated!
They tend to sit at around $500, so I would recommend starting around $450.
Quite fresh to these forums on the heels of buying my first board and looking to now sell realizing how daunting the build is.
RAMA M65-A - Space Grey w/Nylon Base
PCB & Brass Plate Upgrade.
Unbuilt and brand new in box.
Any information on a price for this would be greatly appreciated!
If you're only intimidated by the build, maybe consider sending to someone to have it built for you! There are a lot of folks who offer that sort of service at a reasonable price.
Quite fresh to these forums on the heels of buying my first board and looking to now sell realizing how daunting the build is.
RAMA M65-A - Space Grey w/Nylon Base
PCB & Brass Plate Upgrade.
Unbuilt and brand new in box.
Any information on a price for this would be greatly appreciated!
If you're only intimidated by the build, maybe consider sending to someone to have it built for you! There are a lot of folks who offer that sort of service at a reasonable price.
I actually thought about that but ended up thinking that was counter productive for initial reason for purchasing the board: Building it myself. The soldering mostly is was intimidates me, even after watching hours of tutorials and build guides. Looking solder-free boards like Rama's new Koyu for my first mech board.
just curious about kmac 1 pricing, particularly a silver 1.3
built professionally, very minor imperfections
thanks
I am thinking about selling my WASD V2 TKL. I modded it to lubed mx clears and added dyesubbed thick pbt keycaps from imsto. Can anyone tell me what it is worth?
I am thinking about selling my WASD V2 TKL. I modded it to lubed mx clears and added dyesubbed thick pbt keycaps from imsto. Can anyone tell me what it is worth?
You'll probably be able to get back what you paid.
how much should a KMAC LE unbuilt kit fetch ? I've been trying to trade but without success so I'm thinking of just straight out sell it. Do you guys have an idea ?
how much should a KMAC LE unbuilt kit fetch ? I've been trying to trade but without success so I'm thinking of just straight out sell it. Do you guys have an idea ?
Seen most sell anywhere from 300 to 500. The higher end sits for a while.
huh, how much would be a VE.A with Tealios and a 910 PC be worth ?
EDIT: these keyboards have been offered to me, and I think they'd be worth more than what you said ? I'm just curious, I'm not too knowledgeable when it comes to customs
VE.A probably in the $600-750 range.
910PC "market-price" in the 700+ range.
I guess the LE price is very volatile since there are so few out there. But for the VE.A and the 910 we have much more recently sold that it's easier to get a real price estimate. The LE should be worth around 600 imo but if there is a buyer who is really keen/big interest you can get more.VE.A probably in the $600-750 range.
910PC "market-price" in the 700+ range.
Yeah, so that brings me to wonder why the KMAC LE is worth between 300 and 500 when the items I have been offered have both a higher value. I don't question your price checking skills, I'm really just curious. Some folks told me 800usd but I didn't believe them since it's such a huge number and past sales showed that it wouldn't go for near ar much as that but ugh, I can't quite figure out a stable price for it. Sorry if I'm being rude or anything since you provided me a number in the first place.
Pretty much what Sig said. The thing about KMACs is also that they've been characterized by a lot of past owners. Some say they're pingy and hollow, some say they're some of the nicer boards they've used; it's all over the place. There's also KMAC 1, 1.2, 2, LE -- all of these iterations of basically what is the same keyboard design. I think just the fact that the keyboard is old and iconic doesn't necessarily make it more valuable than others. We see competitive prices at around 400 for custom TKL kits of similar quality with great QC. Group buys opening so frequently also mitigates a lot of the interest in older, simple designs. Overall it's just that the demand isn't there for a KMAC TKL (different story for Happy or Mini), when there are so many other appealing options. As opposed to it, the VE.A is unique in being an ergo split 75% with an appealing RGB underglow look. The PC 910 is unique in that it's one of the first polycarbonate-made customs by a prolific and renowned keyboard designer (TGR/yuktsi). The KMAC, in popular view, pales in comparison in features and intricacies in design. (Note: I don't agree with this. I think KMACs are interesting)I guess the LE price is very volatile since there are so few out there. But for the VE.A and the 910 we have much more recently sold that it's easier to get a real price estimate. The LE should be worth around 600 imo but if there is a buyer who is really keen/big interest you can get more.VE.A probably in the $600-750 range.
910PC "market-price" in the 700+ range.
Yeah, so that brings me to wonder why the KMAC LE is worth between 300 and 500 when the items I have been offered have both a higher value. I don't question your price checking skills, I'm really just curious. Some folks told me 800usd but I didn't believe them since it's such a huge number and past sales showed that it wouldn't go for near ar much as that but ugh, I can't quite figure out a stable price for it. Sorry if I'm being rude or anything since you provided me a number in the first place.
Price check on my time.
Price check on my time.
Minimum wage.
I'm fully aware that you require a post score of 25 or higher to sell but I just do not have the luxury of time with a work and three children to get that score up. I still have a Rama Works M65-A unbuilt and new board for sale but prices I've seen go from $400-$600 in varying forms.
I'm just wanting this board gone but cannot post it anywhere. What's a legitimate selling price and where else is it possible to find a home for this set?
Thanks.
I have a KBD75, that's in near perfect condition. It has the silver case. White LEDs back lighting. RGB underglow. But it has old stock box navy switches. What would you guys price this keyboard at?
I also have a Zeal60 Rev 2 with a brass plate, zeal stabs lubed, 78g zilents lubed, and a KBDfans 60% silver case with the weight ( https://kbdfans.cn/collections/60-layout-case/products/mechanical-keyboard-shell-anode-aluminum-shell-gh60-poker-60-mechanical-keyboard-shell THIS ONE) what would you guys this one at as well?
I have a KBD75, that's in near perfect condition. It has the silver case. White LEDs back lighting. RGB underglow. But it has old stock box navy switches. What would you guys price this keyboard at?
I also have a Zeal60 Rev 2 with a brass plate, zeal stabs lubed, 78g zilents lubed, and a KBDfans 60% silver case with the weight ( https://kbdfans.cn/collections/60-layout-case/products/mechanical-keyboard-shell-anode-aluminum-shell-gh60-poker-60-mechanical-keyboard-shell THIS ONE) what would you guys this one at as well?
lmao I came to this thread wanting an answer to the same question, and the keyboard you described is like the exact one I just got. Then I realized it was yours lol.
Bumping for visibility though as I am trying to sell now too (I know I can't yet but a price check would help me see what its worth)
Hi there, I'm new to this site, and I have a G80-3494LYCUS-0 keyboard I've got a few days ago I wanted to show you guys:Show Image(https://i.imgur.com/pQrVAUY.jpg)
More pictures here:
https://imgur.com/a/2ktdXlF (https://imgur.com/a/2ktdXlF)
What little information I was able to find on this board, is that apparently it was Cherry's first board with red switches and was only sold in Asia. Is that right?
I've bought it here in Germany from a nice Indian guy who came here to study computer science :)
I'd appreciate any further info on this board, like, did the seller convert it to blue LEDs or where those standard? Is this keyboard still being made?
Any idea what keycaps are on the keyboard? They are PBT and feel rather nice and look very well made.
Lastly, I paid €50 for this keyboard and the box with the original (PBT) keycaps, was that a good price?
Thank you guys :)
Price check on Chicony KB-5182?
- big ass enter
- cherry mx blues :(
Probably not worth too much, what do you think?
How much is this board worth pls?
Cherry G81-1800HAG/07
White switches, double shot caps
Thanks
(Attachment Link) (Attachment Link)
How much is this board worth pls?
Cherry G81-1800HAG/07
White switches, double shot caps
Thanks
(Attachment Link) (Attachment Link)
These normally go for about $40-50 shipped.
How much is this board worth pls?
Cherry G81-1800HAG/07
White switches, double shot caps
Thanks
(Attachment Link) (Attachment Link)
These normally go for about $40-50 shipped.
Round 5 is fantastic. If I had the cash I'd buy, and I don't even like SA.
anyone know how much for a kmac2 and how much for a 356cl
Anyone know the price on a mint condition silver kmac1 built W krytox vint blacks?
What's GMK Laser Cyberdeck/Gaijin sealed worth?
It seems like Cyberdeck is worth around what it sold for but Gaijin is worth a bit more than double.
anyone know how much for a kmac2 and how much for a 356clLate answers but 356cl goes around 8-10k atm, not many surface tho
How much is OTD Red Alert full set at new conditions?
How much is OTD Red Alert full set at new conditions?
Last one went for $400 ish IIRC?
Hoping to get a price check on a Ritual Master Wormskull hyperfuse colorway, this is the keycap http://imgur.com/a/CqHw82j
What are they worth?
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
How much can I sell SA Pulse keycaps? I have alphas, text mods, noire, communities, 7u spacebars, and round 2 novelties. They are all in great condition with no shine. I'd prefer selling as a bundle but would it be possible?
How much can I sell SA Pulse keycaps? I have alphas, text mods, noire, communities, 7u spacebars, and round 2 novelties. They are all in great condition with no shine. I'd prefer selling as a bundle but would it be possible?
Here is an eBay as to go off of:
https://www.ebay.com/itm/Massdrop-x-MiTo-SA-Pulse-Custom-Keycap-Set/123618518433?hash=item1cc83ce5a1:g:8MwAAOSw84Zb9rV0
I love the Noire set, wish I could bring myself to use ABS keys...
Sent from my iPhone using Tapatalk
What are they worth?
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
That's pretty expensive. I'd honestly just go for GB pricing x 1.25 at most.
That's pretty expensive. I'd honestly just go for GB pricing x 1.25 at most.
Good to know, so around 220-230 USD?
That's pretty expensive. I'd honestly just go for GB pricing x 1.25 at most.
Good to know, so around 220-230 USD?
Yeah, you can start around 250 OBO and go from there. Cheers.
What are they worth?
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Ask for $100 each, then sell to the highest private offer.
Is that Yoda 1 or 2? 🤨
(https://i.imgur.com/pG6UEMD.jpg)
What are they worth?
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Ask for $100 each, then sell to the highest private offer.
What are they worth?
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Ask for $100 each, then sell to the highest private offer.
Uhhh, I’ll take them all for $500...
Thinking about downsizing my model F collection.AT around 250$ i'd say is reasonable maybe a tad higher +10%~
IBM AT Model F - Restored, new foam and painted plate with Soarer's converter
IBM Model F 122 - Restored, new foam and painted plate. I didn't install a converter yet.
I was thinking about $250 for either one , let me know if I'm off by a lot or not. Thanks!
Thinking about downsizing my model F collection.AT around 250$ i'd say is reasonable maybe a tad higher +10%~
IBM AT Model F - Restored, new foam and painted plate with Soarer's converter
IBM Model F 122 - Restored, new foam and painted plate. I didn't install a converter yet.
I was thinking about $250 for either one , let me know if I'm off by a lot or not. Thanks!
F122 I'd say around 300$ (?) There is one that's been out at 375 on r/mm but hasn't sold for a month.
Thinking about downsizing my model F collection.
IBM AT Model F - Restored, new foam and painted plate with Soarer's converter
IBM Model F 122 - Restored, new foam and painted plate. I didn't install a converter yet.
I was thinking about $250 for either one , let me know if I'm off by a lot or not. Thanks!
BNIB Cherry G81-3100 SDU?300-325
Hi guys
Do someone know the price for a Cherry G80-1800 HQU, MX black switches, sliiiiightly yellowed keycaps but changed cable ? US layout, double shots
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
I'd like to trade my Cyanara Shishi, what are potential 1 to 1 trades that I can do? More specifically, can I trade a Shishi for ETF (Fugthulu), Bro, or Clack? Legit new to trading artisans. ;D
Thanks a lot for the reply! Good to know that I can at least colorswap it. I think I'm aiming to get a Shishi or Orochi to go with either hyperfuse or deep space, instead of keeping cyanara.I'd like to trade my Cyanara Shishi, what are potential 1 to 1 trades that I can do? More specifically, can I trade a Shishi for ETF (Fugthulu), Bro, or Clack? Legit new to trading artisans. ;D
No, the Cyanara Shishi is worth its retail value.
You can colorswap for other sculpts around its retail value. You could get a singleshot Clack if very lucky, or otherwise trade for some simpler Bro Caps.
However, generally speaking the Cyanara Shishi is a fulfillment sale key so it's unlikely to trade for any of the three mentioned.
Thanks a lot for the reply! Good to know that I can at least colorswap it. I think I'm aiming to get a Shishi or Orochi to go with either hyperfuse or deep space, instead of keeping cyanara.I'd like to trade my Cyanara Shishi, what are potential 1 to 1 trades that I can do? More specifically, can I trade a Shishi for ETF (Fugthulu), Bro, or Clack? Legit new to trading artisans. ;D
No, the Cyanara Shishi is worth its retail value.
You can colorswap for other sculpts around its retail value. You could get a singleshot Clack if very lucky, or otherwise trade for some simpler Bro Caps.
However, generally speaking the Cyanara Shishi is a fulfillment sale key so it's unlikely to trade for any of the three mentioned.
Hi, are Novatouch TKL worth anything?
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
Menloes and Murrays are both around retail to 1.5x value -- you could certainly trade them n:1 and PayPal to top off otherwise. I would say Menloes trade for the other sculpts in the Nightcaps line but not Eggface v2s or Fugthulhus. Both even together would likely not cover the worth of a GAF cap, but it all depends on the person anyway.
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
Menloes and Murrays are both around retail to 1.5x value -- you could certainly trade them n:1 and PayPal to top off otherwise. I would say Menloes trade for the other sculpts in the Nightcaps line but not Eggface v2s or Fugthulhus. Both even together would likely not cover the worth of a GAF cap, but it all depends on the person anyway.
This is exactly the kind of informative answer I was hoping for! Thank you! :)
I had a feeling Menloes were of less value than a few others in the same line, like the Fugthulhus. How do Eggface v2 and Fugthulhus hold up compared to retail value? Got an incoming ETF artisan from the Valentine's Day sale and am crossing my fingers for something awesome. ;D
Good to know I could always combine those two and balance with PP for a Gaf cap at least. Hope to score one one day.
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
Menloes and Murrays are both around retail to 1.5x value -- you could certainly trade them n:1 and PayPal to top off otherwise. I would say Menloes trade for the other sculpts in the Nightcaps line but not Eggface v2s or Fugthulhus. Both even together would likely not cover the worth of a GAF cap, but it all depends on the person anyway.
This is exactly the kind of informative answer I was hoping for! Thank you! :)
I had a feeling Menloes were of less value than a few others in the same line, like the Fugthulhus. How do Eggface v2 and Fugthulhus hold up compared to retail value? Got an incoming ETF artisan from the Valentine's Day sale and am crossing my fingers for something awesome. ;D
Good to know I could always combine those two and balance with PP for a Gaf cap at least. Hope to score one one day.
It really is colorway dependent, but I would say that market value wise, Eggfaces hover around anywhere from retail to 2x-ish value. Fugthulhus might be the most popular among the sculpts.
I personally don't enjoy seeing things in that marketplace lens, but it's the way it is.
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
Menloes and Murrays are both around retail to 1.5x value -- you could certainly trade them n:1 and PayPal to top off otherwise. I would say Menloes trade for the other sculpts in the Nightcaps line but not Eggface v2s or Fugthulhus. Both even together would likely not cover the worth of a GAF cap, but it all depends on the person anyway.
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
Menloes and Murrays are both around retail to 1.5x value -- you could certainly trade them n:1 and PayPal to top off otherwise. I would say Menloes trade for the other sculpts in the Nightcaps line but not Eggface v2s or Fugthulhus. Both even together would likely not cover the worth of a GAF cap, but it all depends on the person anyway.
I think the retail-1.5x retail range applies to Murrays without a colored eye or special characteristic (like colored encapsulating resin, a gem in the recessed eye, etc.). Enchanted Murray, gem eye Murray, and colored eye Murray I would expect to trade/sell at a higher range, depending on dankness. Enchanted in particular is a very nice Murray and 1.5x would be a nice deal for it imo.
(Attachment Link)
Much danker than, for example:
(Attachment Link)
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
4. 20
Always wondered what 3000SAA was worth, never heard of it selling on the aftermarket though. Anyone know anything apart from the ebay bid from years ago?
Always wondered what 3000SAA was worth, never heard of it selling on the aftermarket though. Anyone know anything apart from the ebay bid from years ago?
I don't think anyone has ever seen one move. Not that I know of, and not that anybody I know of who does follow Cherry items. I wouldn't be surprised if those were worth a fortune.
Looking to trade some of my artisans and would like to know their approximate worth.
Have:
ETF Garganchew-a Menloe
Polymer Salon Enchanted Murray
In general, would ETF Menloes and PS Murrays be traded n:1? Or with PayPal as balance? What other artisans would these compare to for n:1 trades that are not outright color swaps? Would both of them cover the worth of a GAF cap?
Would like to hear your thoughts on this.
1. Sell at 1.5x value Lightning mentioned
2. Buy CC from private sale
3. Trade direct 2 GAF
4. 20
Yo, how much are kailh speed pink switches? I heard they cost more than bronzes despite being identical.I wouldn't price them much more highly. Maybe 10-15 cents higher per?
Always wondered what 3000SAA was worth, never heard of it selling on the aftermarket though. Anyone know anything apart from the ebay bid from years ago?
(Attachment Link)
(Attachment Link)
Is there any aftermarket for these caps?
It is a hot keys project Raven Smoke w/ Red Eyes, guess it was maybe an exclusive to mechanicalkeyboards.com, no idea why I bought this (looks like it is from 2015).....but I just found it and don't need it.
Thanks I'll post it up then.(Attachment Link)
(Attachment Link)
Is there any aftermarket for these caps?
It is a hot keys project Raven Smoke w/ Red Eyes, guess it was maybe an exclusive to mechanicalkeyboards.com, no idea why I bought this (looks like it is from 2015).....but I just found it and don't need it.
I have seen these sell from $15-$30. Newer people that get into artisans seem to want them since they are usually the most readily available.
Hey, GH.
Haven't been active in the KB world for a while. Would it be possible to get some price checks on these artisans, please?Show Image(https://i.imgur.com/sA8IoJS.jpg)
Bottom left column to top right column:
Col 1 bottom-to-top:
BroBot v2.5 Murderbot (?)
Ribbit v2 Murderface (?)
Toadster v2 Murderface (?)
Rustler Murderface (?)
Col 2 bottom-to-top:
BroBot v2.5 Desert Funk
Ribbit Paranoid Purple (?)
Ribbit Witching Hour
UMADBRO (?) Witching Hour
Col 3 bottom-to-top:
Colonel Cranberry (?)
Booper Blank Bubblegum
Toadster One in the Pink
Ribbit One in the Pink
Col 4 bottom-to-top:
Eggface v2 MX clear with crescent moon and sparkles one-off
Bomb King MX Nightside
Fugu MX Galactic Raspberry
Colonel Bubblegum
Thank you, LightningXI!
Would it also be possible to get some price checks on the following, please?
IBM Model F-122 (pristine) https://i.imgur.com/NG9k09B.jpg?2
IBM Model F AT (great condition) https://i.imgur.com/wpDlP8y.jpg?2
IBM 5576-001 (great condition) https://i.imgur.com/TbATs3Z.jpg?2
Monterey K101 (?) with SKCM Blues (board and keys are yellowed, but the switches are in great condition) https://i.imgur.com/dAxPBTE.jpg?2
Apple M0116 (excellent condition SKCM Orange) https://i.imgur.com/Sh5CgvZ.jpg?1
Penor blue keyboard with--I think--SMK clicky white switches; like Monterey switches but white. (Not the tactile white ones.) (I don't think there are any other recorded finds of this board.): https://i.imgur.com/QYvSQ7G.jpg?2
Hey, GH.
Haven't been active in the KB world for a while. Would it be possible to get some price checks on these artisans, please?Show Image(https://i.imgur.com/sA8IoJS.jpg)
Bottom left column to top right column:
Col 1 bottom-to-top:
BroBot v2.5 Murderbot (?)
Ribbit v2 Murderface (?)
Toadster v2 Murderface (?)
Rustler Murderface (?)
Col 2 bottom-to-top:
BroBot v2.5 Desert Funk
Ribbit Paranoid Purple (?)
Ribbit Witching Hour
UMADBRO (?) Witching Hour
Col 3 bottom-to-top:
Colonel Cranberry (?)
Booper Blank Bubblegum
Toadster One in the Pink
Ribbit One in the Pink
Col 4 bottom-to-top:
Eggface v2 MX clear with crescent moon and sparkles one-off
Bomb King MX Nightside
Fugu MX Galactic Raspberry
Colonel Bubblegum
Sent a PM with info
Hey, GH.
Haven't been active in the KB world for a while. Would it be possible to get some price checks on these artisans, please?Show Image(https://i.imgur.com/sA8IoJS.jpg)
Bottom left column to top right column:
Col 1 bottom-to-top:
BroBot v2.5 Murderbot (?)
Ribbit v2 Murderface (?)
Toadster v2 Murderface (?)
Rustler Murderface (?)
Col 2 bottom-to-top:
BroBot v2.5 Desert Funk
Ribbit Paranoid Purple (?)
Ribbit Witching Hour
UMADBRO (?) Witching Hour
Col 3 bottom-to-top:
Colonel Cranberry (?)
Booper Blank Bubblegum
Toadster One in the Pink
Ribbit One in the Pink
Col 4 bottom-to-top:
Eggface v2 MX clear with crescent moon and sparkles one-off
Bomb King MX Nightside
Fugu MX Galactic Raspberry
Colonel Bubblegum
Sent a PM with info
why the secrecy?
Hey I have a comfort keyboard that is in usable condition with the control box. I'm not sure if there's any value in it or if anybody would have interest in buying it. Just hoping someone could tell me if this is worth anything at all (or if there's even a market for these), so I won't feel guilty if I decide to donate it. I can upload images if there's any interest/value. Please help!Show Image(http://www.comfortkeyboard.com/comfort01.jpg)
110 Pack switches MOD-M Tactile Switches $$$
110 Pack switches Cherry MX Red $$$
(Attachment Link)
the virginity that i lost 15 years ago?
How much would this be worth?
KTHXGUIES?
the virginity that i lost 15 years ago?
How much would this be worth?
KTHXGUIES?
you're asking the wrong crowd
ya think?
the virginity that i lost 15 years ago?
How much would this be worth?
KTHXGUIES?
you're asking the wrong crowd
This may have been drunken ****posting.
What do you guys think these unused Rainbow Jelly Keys are worth? Are these Rainbow POM? I got them about 4 years ago.Show Image(https://i.imgur.com/ivDpzGB.jpg)Show Image(https://i.imgur.com/m6NI2In.jpg)Show Image(https://i.imgur.com/10kyQLR.jpg)Show Image(https://i.imgur.com/IpbgIqM.jpg)Show Image(https://i.imgur.com/uhR6JTD.jpg)
What do you guys think these unused Rainbow Jelly Keys are worth? Are these Rainbow POM? I got them about 4 years ago.Show Image(https://i.imgur.com/ivDpzGB.jpg)Show Image(https://i.imgur.com/m6NI2In.jpg)Show Image(https://i.imgur.com/10kyQLR.jpg)Show Image(https://i.imgur.com/IpbgIqM.jpg)Show Image(https://i.imgur.com/uhR6JTD.jpg)
they're OEM profile and look to be rainbow POM. A taobao group buy just ran for OEMs at ~30$ a piece. So anything around that seems fair
What do you guys think these unused Rainbow Jelly Keys are worth? Are these Rainbow POM? I got them about 4 years ago.Show Image(https://i.imgur.com/ivDpzGB.jpg)Show Image(https://i.imgur.com/m6NI2In.jpg)Show Image(https://i.imgur.com/10kyQLR.jpg)Show Image(https://i.imgur.com/IpbgIqM.jpg)Show Image(https://i.imgur.com/uhR6JTD.jpg)
they're OEM profile and look to be rainbow POM. A taobao group buy just ran for OEMs at ~30$ a piece. So anything around that seems fair
Do you have a link to the group buy? I've tried googling it but nothing comes up. I'm trying to find any info I can on these and a group buy page would be perfect.
Can I please get a price check on a Beast switch tool? Thx
Can I please get a price check on a Beast switch tool? Thx
I remembered that Beast made tools with titanium & stainless steel material. What are you talking about?
Those were ~$43 originally.Can I please get a price check on a Beast switch tool? Thx
I remembered that Beast made tools with titanium & stainless steel material. What are you talking about?
I think I have the Titanium one..
Those were ~$43 originally.Can I please get a price check on a Beast switch tool? Thx
I remembered that Beast made tools with titanium & stainless steel material. What are you talking about?
I think I have the Titanium one..
Sent from my SM-G930V using Tapatalk
Looking to get rid of most of my keyboard gear, can anyone help with price checks for the following?:
KMAX 2 TKL Hard Anodized (Think it has a few dead bad solder joints on the number row, probably might not part with this because it would be a ***** to pack and ship from Australia)
Calm Depths R1 (I think it's a Full Set with Tsangan) from the Groupbuy
Hyperfuse DCS version first round I think w/ mini usb (Full set with Tsangan, mini usb is in a not working condition) from the Groupbuy
Round 5 (2 sets 1 Full set all red with Tsangan,1 Full set 60% all grey) from the Groupbuy. Found a receipt of what I bought. https://imgur.com/WIH7zEn
Wyse (Full set I think, I'm not sure if I ever tried using it with my Korean Boards) from the classifieds
GMK double-shots (Full set black and purple mods/tsangan, not sure if I had a 7 key space for it or not. donor board was a cherry OEM one) from the classifieds.
Silver Hammer 60% case (not sure how many revisions of this came out or if it was cloned)
Full Nyan Cat Number row from ` to back space
Assorted keys from the kmiller8 gb that had dolan duck, doofy, spooderman etc. Don't remember which ones I had or if I ordered them all.
I probably have emailed receipts for everything here too to prove the authenticity.
I've been out of the community for quite some time so am very out of the loop. Not accepting offers or snipe attempts at this stage, I'll post up a classified in due time.
I was offered a trade: my Wildstory Scorned Lola and Ikkakujuu Lola for an Ice Dream Murray I'm really aching to get. The Lolas will be used by the recipient for a trade for a Revthulhu that person is looking for.
My question is, how do the Lolas fare value-wise vis-ŕ-vis the Murray? I still haven't seen a single sold on r/mm, only traded or for colorswaps.
hello! could someone give me a price check on GMK valentine's? thanks in advance!$120 was the last I saw it sell for, and it took a while. I'd say $140 max.
Lubed Yok holy pandas? Thinking of either making my own or buying
Sent from my SM-G965U1 using Tapatalk
I was offered a trade: my Wildstory Scorned Lola and Ikkakujuu Lola for an Ice Dream Murray I'm really aching to get. The Lolas will be used by the recipient for a trade for a Revthulhu that person is looking for.
My question is, how do the Lolas fare value-wise vis-ŕ-vis the Murray? I still haven't seen a single sold on r/mm, only traded or for colorswaps.
This is the first official sale for Lolas, so there's no set value as of yet. Only a black singleshot was released as a bonus to the previous sale's winners.
Lubed Yok holy pandas? Thinking of either making my own or buying
Sent from my SM-G965U1 using Tapatalk
Halos are like 0.50 a pop, and the Pandas are back to normal prices, so like $1 a pop at most? So I wouldn't pay more than like $2-2.50 a pop for lubed ones.
Show Image(https://scontent.fosl3-2.fna.fbcdn.net/v/t1.15752-9/57536309_275465633343628_5942614959467790336_n.jpg?_nc_cat=101&_nc_ht=scontent.fosl3-2.fna&oh=f27af5ed838ed477039bc8b2dde62122&oe=5D2EBFCF)
what is this set?
also, how much is topre rbg worth?
how much does gmk purple mods go for? how about used og cherry ansi doubleshots in good condition (white/beige)
Show Image(https://scontent.fosl3-2.fna.fbcdn.net/v/t1.15752-9/57536309_275465633343628_5942614959467790336_n.jpg?_nc_cat=101&_nc_ht=scontent.fosl3-2.fna&oh=f27af5ed838ed477039bc8b2dde62122&oe=5D2EBFCF)
what is this set?
also, how much is topre rbg worth?how much does gmk purple mods go for? how about used og cherry ansi doubleshots in good condition (white/beige)
GMK Purple Mods - like $55
OG ANSI doubleshots - like $50-60 for a G80-3000-like set
The picture - DSA Granite
Topre RGB? - the Realforce? Whatever the MSRP is
Show Image(https://scontent.fosl3-2.fna.fbcdn.net/v/t1.15752-9/57536309_275465633343628_5942614959467790336_n.jpg?_nc_cat=101&_nc_ht=scontent.fosl3-2.fna&oh=f27af5ed838ed477039bc8b2dde62122&oe=5D2EBFCF)
what is this set?
also, how much is topre rbg worth?how much does gmk purple mods go for? how about used og cherry ansi doubleshots in good condition (white/beige)
GMK Purple Mods - like $55
OG ANSI doubleshots - like $50-60 for a G80-3000-like set
The picture - DSA Granite
Topre RGB? - the Realforce? Whatever the MSRP is
not rbg sorry, updated with a pic. thanks for the help. doubleshots pretty much worthless now huh? weird
Show Image(https://scontent.fosl3-2.fna.fbcdn.net/v/t1.15752-9/57536309_275465633343628_5942614959467790336_n.jpg?_nc_cat=101&_nc_ht=scontent.fosl3-2.fna&oh=f27af5ed838ed477039bc8b2dde62122&oe=5D2EBFCF)
what is this set?
also, how much is topre rbg worth?how much does gmk purple mods go for? how about used og cherry ansi doubleshots in good condition (white/beige)
GMK Purple Mods - like $55
OG ANSI doubleshots - like $50-60 for a G80-3000-like set
The picture - DSA Granite
Topre RGB? - the Realforce? Whatever the MSRP is
not rbg sorry, updated with a pic. thanks for the help. doubleshots pretty much worthless now huh? weird
Those Esc/Ctrl kits were like $32-35 if I recall correctly.
sprit gold springs? (korean if it matters). 100 pcs
What do you think is a
Cherry G80-1800HAU beige from 1999 (Date-Code L21)
new in original packaging worth?
Thank you!
Thank you.Awesome, that makes sense. The 1800 layout boards are lovely. If you also want to ever customize them (different switches, etc), you can also consider getting a custom PCB (e.g. TKC1800 or Leeku) and use the same case and keycaps you got.
I payed 100€.
Hard to find HAU in EU.
Price check on this set?100 a piece (per cap).
(http://i.imgur.com/pBXsUnS.jpg) (https://imgur.com/pBXsUnS)
Looking for a fair price for a Vortex Race 3 w/MX Clears. Original everything and in like-new condition. I put neoprene in the bottom of the case, but I don't know if that would add to its value or not.
When I build my first keyboard, I'm probably gonna try to sell the Race to make up for the cost, because I probably won't use it again.
I'm looking for vintage clears.
Found someone selling Desko (G80-1000) with clears.
What would be a reasonable price for that keyboard?
I'm thinking to sell my belowed ex-endgame keycap set - Godspeed SA (HHKB caps set only, no leftovers, no spacebar).
Everything is perfect about this keycap set, it looks and feels nice (and draws a lot of attention from other people). But I decided that ABS plastic is not for me and I'm going back to PBT. What do you guys think such set might cost like? (see attached photo)
Cheers.
Elloooo could i possibly get a price check on the following
2014 HHKB pro 2 - used, perfect condition
WASD v2 with gateron black switches
Unicomp ultra classic
How much are BBv2's going for now-a-days? I'm hoping to expand my collection.
I assume the price is different for single, double, and triple shot so if someone could tell me for each, that would be helpful.
Greetings from a somewhat longstanding member who is totally inactive these days. Anyway, I have a Model M, part number 52G9658, dated Jan 1994. In good working condition, a little dirty, but otherwise really nice. I have no clue whether or not anyone still likes these keyboards, and no clue how much it might be worth. Thanks!
Def higher than this if MX. Most singlecolor MX goes for 150 ish multicolor even higher.How much are BBv2's going for now-a-days? I'm hoping to expand my collection.
I assume the price is different for single, double, and triple shot so if someone could tell me for each, that would be helpful.
Depends frankly on the colorway. You could have luck anywhere from $50 all the way up to hundreds. I'd say the range for multishots goes from $90-200
Def higher than this if MX. Most singlecolor MX goes for 150 ish multicolor even higher.How much are BBv2's going for now-a-days? I'm hoping to expand my collection.
I assume the price is different for single, double, and triple shot so if someone could tell me for each, that would be helpful.
Depends frankly on the colorway. You could have luck anywhere from $50 all the way up to hundreds. I'd say the range for multishots goes from $90-200
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.Show Image(https://i.imgur.com/Sk8Eevk.jpg)Show Image(https://i.imgur.com/gXx7g4t.jpg)Show Image(https://i.imgur.com/kswDZwq.jpg)Show Image(https://i.imgur.com/A0K377t.jpg)Show Image(https://i.imgur.com/gONp4Ju.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)
I'm thinking to sell my belowed ex-endgame keycap set - Godspeed SA (HHKB caps set only, no leftovers, no spacebar).
Everything is perfect about this keycap set, it looks and feels nice (and draws a lot of attention from other people). But I decided that ABS plastic is not for me and I'm going back to PBT. What do you guys think such set might cost like? (see attached photo)
Cheers.
I'd say around $120 or so is a decent price. Considering the coverage is quite exclusive.
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.
The white set is extremely uncommon, I would say they are all minimum 150$, white set probably more than 200$
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.Show Image(https://i.imgur.com/Sk8Eevk.jpg)Show Image(https://i.imgur.com/gXx7g4t.jpg)Show Image(https://i.imgur.com/kswDZwq.jpg)Show Image(https://i.imgur.com/A0K377t.jpg)Show Image(https://i.imgur.com/gONp4Ju.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)
these are decently hard to get now, i'd go with $100-120 each or so if they're unused, as rakuten had them for 80ish until last year. i'd like to buy the white specifically, pm me if you're interested ^-^
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.Show Image(https://i.imgur.com/Sk8Eevk.jpg)Show Image(https://i.imgur.com/gXx7g4t.jpg)Show Image(https://i.imgur.com/kswDZwq.jpg)Show Image(https://i.imgur.com/A0K377t.jpg)Show Image(https://i.imgur.com/gONp4Ju.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)
these are decently hard to get now, i'd go with $100-120 each or so if they're unused, as rakuten had them for 80ish until last year. i'd like to buy the white specifically, pm me if you're interested ^-^
So they're not available anywhere anymore? The whites are spoken for.
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.
The white set is extremely uncommon, I would say they are all minimum 150$, white set probobly more than 200$
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.
The white set is extremely uncommon, I would say they are all minimum 150$, white set probably more than 200$
+1 this set hard to find
How much are OEM Realforce (Leopold) Topre Keycap sets worth brand new? These are complete sets of 104 and fit the 87U or 104 full size. Here's what label on the box looks like which shows the colors and this is what the sets look like. Anyone know what these are worth? They're OEM quality from Leopold and there doesn't seem to be many Topre options available on the market, which doesn't necessarily mean anything but might if there are enough Topre fans out there.Show Image(https://i.imgur.com/Sk8Eevk.jpg)Show Image(https://i.imgur.com/gXx7g4t.jpg)Show Image(https://i.imgur.com/kswDZwq.jpg)Show Image(https://i.imgur.com/A0K377t.jpg)Show Image(https://i.imgur.com/gONp4Ju.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)Show Image(https://i.imgur.com/ZXGYWG3.jpg)
these are decently hard to get now, i'd go with $100-120 each or so if they're unused, as rakuten had them for 80ish until last year. i'd like to buy the white specifically, pm me if you're interested ^-^
So they're not available anywhere anymore? The whites are spoken for.
i don't believe so, the last places to have them before they dried up were rakuten and taobao but it seems like they're all gone now. i knew the white set was rarer, just like the pink, but i didn't think there would really be any demand for it, since it's so similar to stock. it's interesting. i guess there's been an uptick in prices for oem topre stuff recently. best of luck with the sales!
Anyone know what this is worth?Show Image(https://i.imgur.com/4RbuNOC.jpg)Show Image(https://i.imgur.com/NC3ZDJn.jpg)Show Image(https://i.imgur.com/oHxK3sh.jpg)Show Image(https://i.imgur.com/iWaSKIA.jpg)Show Image(https://i.imgur.com/PFNTFT5.jpg)
Anyone know the value of these Digilogs with Realforce 87U''s? I bought all of them new around 2014 ish and the keyboards and cases are still unused.
1.Show Image(https://i.imgur.com/WtlgdLd.jpg)
2.Show Image(https://i.imgur.com/7nFVtZp.jpg)
3.Show Image(https://i.imgur.com/6SnMnxE.jpg)
4.Show Image(https://i.imgur.com/Jj01aiz.jpg)
more pics https://imgur.com/a/cLf5X1Y
Anyone know the value of these Digilogs with Realforce 87U''s? I bought all of them new around 2014 ish and the keyboards and cases are still unused.
1.Show Image(https://i.imgur.com/WtlgdLd.jpg)
2.Show Image(https://i.imgur.com/7nFVtZp.jpg)
3.Show Image(https://i.imgur.com/6SnMnxE.jpg)
4.Show Image(https://i.imgur.com/Jj01aiz.jpg)
more pics https://imgur.com/a/cLf5X1Y
topre 8rf 87u black
topre pink keyset printed letters
and this
https://geekhack.org/index.php?topic=38092.msg733012#msg733012
Looks the same as that silver one.
cheers
Anyone know the value of an Orion v2 with an alps plate with blue alps and Cherry plate with lubed vintage cherry browns in it? I have the winkeyless alu blue grey top plate and both acrylic bottoms. No alu bottom :'(
Here are some pics of it: https://imgur.com/a/bIXGQ
https://geekhack.org/index.php?topic=38092.msg733012#msg733012If it is a 356mini you should be looking at 1.5k++ otherwise look at subcats response, look carefully and don´t get lowballed!
Looks the same as that silver one.
cheers
Anyone know the value of an Orion v2 with an alps plate with blue alps and Cherry plate with lubed vintage cherry browns in it? I have the winkeyless alu blue grey top plate and both acrylic bottoms. No alu bottom :'(
Here are some pics of it: https://imgur.com/a/bIXGQ
Thanks king
I could see that go for like 5-600 for the Orion, although most people will want an alu bottom.
The extra parts should be like $50 for PCB, $40 for plate, and cost of switches (around $1.8 per SKCM Blue). I normally don't charge much over MX builds because the price deflates quickly for built boards.
Show Image(https://i.imgur.com/OQRILgL.png)
SGI 9500801 ANSI beige dyesubs
Show Image(https://i.imgur.com/OQRILgL.png)
SGI 9500801 ANSI beige dyesubs
SGI Granite dyesubs are selling for around 180-200 shipped nowadays. I suspect SGI Beige would be a little less, as I see people ask for Granite a bit more frequently than Beige.
How much for this rustic fashioned plate?? One of a kind.Show Image(https://uploads.tapatalk-cdn.com/20190601/668c9137b18aa904a512f28857af5540.jpg)
These still worth $250?Show Image(https://uploads.tapatalk-cdn.com/20190601/66bea6ab0cb7f85ba89a4c85abe088d2.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190601/235cdc65b513578f520022ea96d6065e.jpg)
Vintage cherry clears? How much?Show Image(https://uploads.tapatalk-cdn.com/20190601/6191c4d45ea53f677907973165fda2b0.jpg)
Not keyboard related but is there any value in old pc game CDs or manuals?
Like half life, unreal tournament, giants citizen kabuto??
What about floppy disks??
Price Check on the bellow key caps if anyone knows, Please.
All caps are MX versions.
Bro Caps
Star Cluster V2
Interstellar Blue V2
Nebulus V2
Andromeda Skies V2
Thanks in advance.
Price Check on the bellow key caps if anyone knows, Please.
All caps are MX versions.
Bro Caps
Star Cluster V2
Interstellar Blue V2
Nebulus V2
Andromeda Skies V2
Thanks in advance.
The most recent sale for Cosmos BBv2s on mm, I saw them for $200 each, and only 1 of 3 sold, if that helps as guidance.
So I'd make an educated guess and say $160-200 anywhere within that range.
Those iMav keycaps are going to be very pricey. :))
Hey! ;)Not entirely relevant to this thread, but I figure it does more good than harm posting here.
What do you think how much can i get for these?
Its ok 500$?
Cherry MY-3100SBU(Mint condition)
Never used,in original box with user manual and warranty paper.
Hey! ;)Not entirely relevant to this thread, but I figure it does more good than harm posting here.
What do you think how much can i get for these?
Its ok 500$?
Cherry MY-3100SBU(Mint condition)
Never used,in original box with user manual and warranty paper.
I purchased all three of Marko's SBUs on the 31st of May. Since then, I haven't heard back from him once. Throughout the whole buying process he tried his best to make me pay with Skrill, which has no chargebacks.
I've just learned that he's been trying to sell more SBUs to other people, and has successfully sold at least one board. He's told the other buyer that he doesn't have money to ship his keyboard. Seems like a clear trend of overselling and lack of response.
Please, don't buy anything off this guy. If you've already bought something: get ready to do a chargeback if you don't hear anything from him soon.
Hey! ;)Not entirely relevant to this thread, but I figure it does more good than harm posting here.
What do you think how much can i get for these?
Its ok 500$?
Cherry MY-3100SBU(Mint condition)
Never used,in original box with user manual and warranty paper.
I purchased all three of Marko's SBUs on the 31st of May. Since then, I haven't heard back from him once. Throughout the whole buying process he tried his best to make me pay with Skrill, which has no chargebacks.
I've just learned that he's been trying to sell more SBUs to other people, and has successfully sold at least one board. He's told the other buyer that he doesn't have money to ship his keyboard. Seems like a clear trend of overselling and lack of response.
Please, don't buy anything off this guy. If you've already bought something: get ready to do a chargeback if you don't hear anything from him soon.
Just replying to say I am the other person he sold to. Sorry for crapping in the thread, just want to make sure anyone who's considering buying from this guy to reconsider.
Hey! ;)Not entirely relevant to this thread, but I figure it does more good than harm posting here.
What do you think how much can i get for these?
Its ok 500$?
Cherry MY-3100SBU(Mint condition)
Never used,in original box with user manual and warranty paper.
I purchased all three of Marko's SBUs on the 31st of May. Since then, I haven't heard back from him once. Throughout the whole buying process he tried his best to make me pay with Skrill, which has no chargebacks.
I've just learned that he's been trying to sell more SBUs to other people, and has successfully sold at least one board. He's told the other buyer that he doesn't have money to ship his keyboard. Seems like a clear trend of overselling and lack of response.
Please, don't buy anything off this guy. If you've already bought something: get ready to do a chargeback if you don't hear anything from him soon.
Just replying to say I am the other person he sold to. Sorry for crapping in the thread, just want to make sure anyone who's considering buying from this guy to reconsider.
I was also offered one of these by Marko, but I did not accept the offer as it was beyond a budget I had set for myself. It sure sounds fishy, so I think it's well-advised to have this warning posted here. Thanks for sharing these details.
Bought these a while ago, looking for what they are worth and what the names of them are, any help would be great!Please pm me if you have any information!!Show Image(https://uploads.tapatalk-cdn.com/20190612/fab20018a57beda103902cd68e4fb06a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3345c5fb390307286bacd7c553e2cff8.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/94acab5ad9a3ca3b168f2406d565ccc7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/6f8b8edb258a0a70f135529561a3c248.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/5713755bfa4f0df8c854adbf27a2556f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3101584ec9d47b5d0c93924f2dcb75c6.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d12fc7e06f47396c7f342637a7543344.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/13af4817a4f4a1cd1b4149e8946655cc.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/dc0c0e17b0d00335f06445ad390c6d97.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/80e185589db99b12e4e9828bb7dc3a22.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e8f4e285c9bc63902cb4c2d8a5d1846c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/65cfa0914dcbfa1e2e48565add4d9fab.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3da6441bf05e945e1270a80d32a1527e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/43974bcc9ac5df85e3127e51497ee5f4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d9ad4d70c1bd5f0c428134da036c801b.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e1070eff10cfccb88ee5ae8a8d6fac0f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/cdf09152623faf68e895240a29357efa.jpg)
Sent from my ONEPLUS A6013 using Tapatalk
Bought these a while ago, looking for what they are worth and what the names of them are, any help would be great! Please pm me if you have any input or tag me in the comment!Do people actually pay money for these? I must be missing somethingMoreShow Image(https://uploads.tapatalk-cdn.com/20190612/fab20018a57beda103902cd68e4fb06a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3345c5fb390307286bacd7c553e2cff8.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/94acab5ad9a3ca3b168f2406d565ccc7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/6f8b8edb258a0a70f135529561a3c248.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/5713755bfa4f0df8c854adbf27a2556f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3101584ec9d47b5d0c93924f2dcb75c6.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d12fc7e06f47396c7f342637a7543344.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/13af4817a4f4a1cd1b4149e8946655cc.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/dc0c0e17b0d00335f06445ad390c6d97.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/80e185589db99b12e4e9828bb7dc3a22.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e8f4e285c9bc63902cb4c2d8a5d1846c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/65cfa0914dcbfa1e2e48565add4d9fab.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3da6441bf05e945e1270a80d32a1527e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/43974bcc9ac5df85e3127e51497ee5f4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d9ad4d70c1bd5f0c428134da036c801b.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e1070eff10cfccb88ee5ae8a8d6fac0f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/cdf09152623faf68e895240a29357efa.jpg)
Do people actually pay money for these? I must be missing somethingIt's very variable depending on style and who the maker is but artisan keycaps range from the tens to hundreds and even into the thousand+ dollar range.
Bought these a while ago, looking for what they are worth and what the names of them are, any help would be great! Please pm me if you have any input or tag me in the comment!Do people actually pay money for these? I must be missing somethingMoreShow Image(https://uploads.tapatalk-cdn.com/20190612/fab20018a57beda103902cd68e4fb06a.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3345c5fb390307286bacd7c553e2cff8.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/94acab5ad9a3ca3b168f2406d565ccc7.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/6f8b8edb258a0a70f135529561a3c248.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/5713755bfa4f0df8c854adbf27a2556f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3101584ec9d47b5d0c93924f2dcb75c6.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d12fc7e06f47396c7f342637a7543344.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/13af4817a4f4a1cd1b4149e8946655cc.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/dc0c0e17b0d00335f06445ad390c6d97.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/80e185589db99b12e4e9828bb7dc3a22.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e8f4e285c9bc63902cb4c2d8a5d1846c.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/65cfa0914dcbfa1e2e48565add4d9fab.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/3da6441bf05e945e1270a80d32a1527e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/43974bcc9ac5df85e3127e51497ee5f4.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/d9ad4d70c1bd5f0c428134da036c801b.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/e1070eff10cfccb88ee5ae8a8d6fac0f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20190612/cdf09152623faf68e895240a29357efa.jpg)
The same can be said for some of your vintage keyboards.
It's all a matter of taste.
The "artisans" don't provide much but an ugly(imo) cap that sits on your otherwise beautiful board
Some look nice but anything more than $50 for a single keycap is ludicrous to me.
How much is this worth? This a Smallfry GB from back in the day basically a JD40 II
The switches on this keyboard are amazing and everything works with zero issues. Vintage Cherry MX Black switches with MX Red springs.
Cyan LED's, all working.
Built by user Photoelectric.Show Image(https://i.imgur.com/YRXyUKg.jpg)Show Image(https://i.imgur.com/Ess1BbW.jpg)Show Image(https://i.imgur.com/SDXZvua.jpg)Show Image(https://i.imgur.com/TS7oyQp.jpg)Show Image(https://i.imgur.com/GRZ13KX.jpg)Show Image(https://i.imgur.com/h3IOHbv.jpg)Show Image(https://i.imgur.com/wYbSTyb.jpg)Show Image(https://i.imgur.com/gFrVoU8.jpg)Show Image(https://i.imgur.com/5IHcqJj.jpg)Show Image(https://i.imgur.com/iWGHg84.jpg)
I am looking to get rid of most of my Keyboard gear/parts. Help on pricing / value would be greatly appreciated. Thanks!!!
1. Massdrop x MiTo DSA Legacy Custom Keycap Set - Brand New and un-touched
- Alphas: Rush Alphas
- Base Mods – Solace
- Extras – Solace
- F-Row - Black
- Novelties - Black
- Numpad – Solace
- Alphas 2: Black Alphas
2. ZealPC R2 Zeal60 RGB LED PCB - Brand New and un-touched
3. Dasher & Dancer SA Custom Keycap Set – Dasher TKL - Brand New and un-touched
4. Hammer Lagoon Artisan Spacebar v.2 6.25U MX - Brand New and un-touched
5. Jelly Key Blue Little Dot Enter Key Periwinkle/Yellow, Infinity & Beyond MX - Brand New and un-touched
6. Dark Lord Helmet Artisan, Matte Black MX - Brand New and un-touched
7. Fugu Wizard Eggplant MX - Brand New and un-touched
8. 96KEE - Aluminum Case 96-Key Keyboard Kit × 1 Titanium Grey / Full Kit W/ Extra PCB - Brand New and un-touched
Price check on these two?
Monterey K-104 board NIB with Blue clicky SMK switches.
There's also a lot more in this thread I wouldn't mind having price checked:
https://deskthority.net/viewtopic.php?f=2&t=22055
Price check on these two?
Monterey K-104 board NIB with Blue clicky SMK switches.
There's also a lot more in this thread I wouldn't mind having price checked:
https://deskthority.net/viewtopic.php?f=2&t=22055
I wish i had better help for you I don't know but I love this board if you ever decide to sell let me know!
How much are SA Carbon sets going for these days, new in original packaging, shipped March 2018? I only see warning signs on eBay right now and I didn't see anyone asking about them in this thread recently. I saw alphas listed for $85 somewhere, but they were sold out.
Arrows Kit
Modifiers Extension Kit
Orange Alphas
Alphas
Ergodox Kit
Flex Kit
Modifiers Kit
Numpad Kit
Carbon Novelties
Alternate Colorway
Alphas | $62 |
Modifiers | $77 |
Numpad | $46 |
Novelties | $50 |
How much is this worth? This a Smallfry GB from back in the day basically a JD40 II
The switches on this keyboard are amazing and everything works with zero issues. Vintage Cherry MX Black switches with MX Red springs.
Cyan LED's, all working.
Built by user Photoelectric.
I've seen JD40s sell for around $100.
How much would these clacks be worth? These are both Topre stems.Drunken around 275-300 the other one I cant exactly see what color it is
Edit: Woops, I did not realize there was a Clack valuation thread. I'll post in there - apologies!
How much would these clacks be worth? These are both Topre stems.Drunken around 275-300 the other one I cant exactly see what color it is
Edit: Woops, I did not realize there was a Clack valuation thread. I'll post in there - apologies!
Imma say 175-200 but not as sure!How much would these clacks be worth? These are both Topre stems.Drunken around 275-300 the other one I cant exactly see what color it is
Edit: Woops, I did not realize there was a Clack valuation thread. I'll post in there - apologies!
Hmmm... since you responded anyway, it's black. I'm pretty sure it's the Depth Black.
Hey ya'll, PC on these 2 topre boards?Like 250 or so seems to sell on the R2
1. RF R2 PFU silent version 45g, completely new (ivory white).
2. Galactic Blue Norbatouch.
Cheers.
Price check on OG Moistgun Aliems.Tree fiddy.
What are /dev/tty base kit, beige mods and beige winkeyless worth these days?Retail.
So I'm cleaning my home office and found some mx lock switches, what's a decent price for selling these nowadays??Show Image(https://uploads.tapatalk-cdn.com/20190714/5172e34978b90a670f06f616d1462673.jpg)
Sent from my SM-G930V using Tapatalk
Hmm there's some for sale in classifieds for $50/switch :eek:So I'm cleaning my home office and found some mx lock switches, what's a decent price for selling these nowadays??Show Image(https://uploads.tapatalk-cdn.com/20190714/5172e34978b90a670f06f616d1462673.jpg)
Sent from my SM-G930V using Tapatalk
Last year my friend got some at $5/switch.
Hmm there's some for sale in classifieds for $50/switch :eek:So I'm cleaning my home office and found some mx lock switches, what's a decent price for selling these nowadays??Show Image(https://uploads.tapatalk-cdn.com/20190714/5172e34978b90a670f06f616d1462673.jpg)
Sent from my SM-G930V using Tapatalk
Last year my friend got some at $5/switch.
Sent from my SM-G930V using Tapatalk
Hmm there's some for sale in classifieds for $50/switch :eek:So I'm cleaning my home office and found some mx lock switches, what's a decent price for selling these nowadays??Show Image(https://uploads.tapatalk-cdn.com/20190714/5172e34978b90a670f06f616d1462673.jpg)
Sent from my SM-G930V using Tapatalk
Last year my friend got some at $5/switch.
Sent from my SM-G930V using Tapatalk
Wait--what? MX Locks are that desirable? I just found three new ones in a baggie yesterday while sorting my keeb stuff.
And I'm going to use them all.
Wait--what? MX Locks are that desirable? I just found three new ones in a baggie yesterday while sorting my keeb stuff.
And I'm going to use them all.
if you need more let me know :cool:
Slack account with romevi added
Sent from my ONEPLUS A6013 using Tapatalk
Slack account with romevi added
Sent from my ONEPLUS A6013 using Tapatalk
I’d say at least five palomino blackwings
KBD 8X Silver w/ T1 switches. (no caps)
Curious what this might fetch, like new condition.
KBD 8X Silver w/ T1 switches. (no caps)
Curious what this might fetch, like new condition.
Think the keyboards go for close their cost which is $200-$250.
Price check for row 1 vint blacks $/switch? Ultrasonic cleaned - not lubed
I have a Realforce 87UB45 that has been kicking around for years and was wondering what its worth? I was hoping to get a HHKB instead since I'll be able to use it on my newer mac without an additional dongle, but am really not sure where it sits in relative value.
SA Penumbra fix kit. Hoping to buy one but not sure what it would be worth today.
Price check on a SGI Granite board in very good shape. A few small scuffs on the bottom of the case, but no yellowing or other defects. The caps are in pristine shape, no yellowing, shine, or marks. The switches are in great shape also, very clean & smooth. No rust on the plate & basically no debris were on the inside of the case when I had it open to check. I believe this board had very little if any use TBH, the scuffs on the bottom case I suspect were from poor storage. I do not have the cord or mouse that goes along with the board. Not planning on selling this board, I just got it for a really good deal & want a better ideal of it's market value. Thanks in advance for any info on it! :thumb:
It appears while taking my hiatus the prices of second-hand customs have skyrocketed. Looking for a fair price range on Kingsavers. I've seen recent ones on /r/mechmarket go for 700-1200. To me, anything past 750 is a bit ridiculous as I have never even spent more than 1000 on an OTD board a couple years ago.I'd say they are around 800-1000$ but they aren't very frequent out in the open so prices are kinda hard to estimate
It appears while taking my hiatus the prices of second-hand customs have skyrocketed. Looking for a fair price range on Kingsavers. I've seen recent ones on /r/mechmarket go for 700-1200. To me, anything past 750 is a bit ridiculous as I have never even spent more than 1000 on an OTD board a couple years ago.I'd say they are around 800-1000$ but they aren't very frequent out in the open so prices are kinda hard to estimate
Price check for GMK BENTO base unopened
Hey all, tried r/MechMarket but got no response, thought I would try here. I would like to build my own 60% and I have three model m's laying around that I cleaned up and thought of selling them to use the money on a new build. It seems as though the prices vary on these boards a lot, so I thought I would try and get a value on mine.
- Cube - 5/25/95
- IBM - 3/11/96
- Dell - 10/16/92
https://imgur.com/a/jev2R92 (https://imgur.com/a/jev2R92)
I find the Cube interesting because it has a date of 95, but still uses an AT connector (I have the adapter to PS2)
Keycult No.2 Rev.1 (Brass)
Hello guys i have this beauty https://imgur.com/gallery/3HskMLC (https://imgur.com/gallery/3HskMLC)
NIB condition with new cable, transparent keycaps, keycap puller and instructions, not sure how much is worth.
Hey guys
need a price check on 3 keyboards
Think6.5
e6.5
satisfaction75
need a price check on these switches-About the same as retail, if not lower.
Massdrop x Invyr Holy Panda Mechanical Switches
i know they retailed for about $1.28 a piece but wanted to know if they dropped or raised in value
also how much do they go for used?
What is an IBM Model M in Industrial Gray worth?I'd personally say box is irrelevant if it's not the original box or not in good shape (or the keyboard isn't new/barely used), but the board is worth quite a bit. I'd say at least $400 but that might be too low or possibly too high, idk.
What about if it's in a box? not the original but in a Model M box?
What is an IBM Model M in Industrial Gray worth?I'd personally say box is irrelevant if it's not the original box or not in good shape (or the keyboard isn't new/barely used), but the board is worth quite a bit. I'd say at least $400 but that might be too low or possibly too high, idk.
What about if it's in a box? not the original but in a Model M box?
I'd say at least $400 but that might be too low or possibly too high, idk.
I'd say at least $400 but that might be too low or possibly too high, idk.
That seems way high unless it is an early one and/or in pristine condition.
Remember that Unicomp is still selling replacement cases:
https://www.pckeyboard.com/page/product/1394942 (https://www.pckeyboard.com/page/product/1394942)
IBM Model M; Part #1390131; Serial #1084249; Date 05-Sep-86
What's a fair price for it in excellent condition?
Anyone know the value of each of these 3 (yellow, lavender, & mint green) topre sets?Show Image(https://i.ibb.co/0ZpppRL/20200205-014034.jpg)
Anyone know the value of each of these 3 (yellow, lavender, & mint green) topre sets?Show Image(https://i.ibb.co/0ZpppRL/20200205-014034.jpg)
I paid around $15 for a Lavender set some time ago. I'd expect maybe a bit more for the yellow ones and the green one is slightly larger so scale accordingly.
Can anyone give me a price check on an 8008 Orochi please.
White HHKB with tons of love. How much can I getz?
Nubbinator Heart?Show Image(https://i.imgur.com/LG86xq4.png)
Just got a model m ssk. I think some rivets fell off but the keyboard is fully functional and looks pretty good. The sticker information is:
PART 1391472
14JUN87
One-piece keycap.
How much would you price this board?
I haven't quite seen any SSKs sell for over 300. In my experience from having owned a handful, they seemed to sell for about 180-220.Just got a model m ssk. I think some rivets fell off but the keyboard is fully functional and looks pretty good. The sticker information is:
PART 1391472
14JUN87
One-piece keycap.
How much would you price this board?
If it's in immaculate and clean condition 250. If you got the box 300-350 depending on condition of the box, NOS doesn't seem to budge that price much, so if the keyboard has been used, but put back in the box, it still seems to go for around that price.
I haven't quite seen any SSKs sell for over 300. In my experience from having owned a handful, they seemed to sell for about 180-220.Just got a model m ssk. I think some rivets fell off but the keyboard is fully functional and looks pretty good. The sticker information is:
PART 1391472
14JUN87
One-piece keycap.
How much would you price this board?
If it's in immaculate and clean condition 250. If you got the box 300-350 depending on condition of the box, NOS doesn't seem to budge that price much, so if the keyboard has been used, but put back in the box, it still seems to go for around that price.
Maybe 250-270 if NOS/NIB
I've got a Happy Hacking Pro 2 black with blank keycaps in near new condition. What it worth these days? I'll probably eventually get the Bluetooth one
1) BroBot: Reaper- N5 Nightstalker Armor Collectors Edition - MX
I probably even still have the box, t-shirt and matching sticker but I'd have to look for them.
(http://i.imgur.com/7Qy2EWsh.jpg) (https://imgur.com/7Qy2EWs)
I've got a Happy Hacking Pro 2 black with blank keycaps in near new condition. What it worth these days? I'll probably eventually get the Bluetooth one
I've seen most HHKBs go for like $160-180
I've got a Happy Hacking Pro 2 black with blank keycaps in near new condition. What it worth these days? I'll probably eventually get the Bluetooth one
I've seen most HHKBs go for like $160-180
That's fantastic. Now I just need to hit the 25 post count to sell mine. Any suggestions? I don't want to spam the board w/ contentless drivel.
How much should I be looking to pay for a lubed/silenced HHKB pro 2 with 55g domes and coloured mods? It's white with lettered caps if that matters. Im based in the uk.
Because the 55g domes are not available by default and the lubed/silencing has already been done for you, I'd think somewhere around $300. Whether the caps are lettered or blank shouldn't make a difference.
Anyone know what a SA Hack'd By Geeks from [CTRL]ALT goes for?
What is my GMK Hyperfuse Redux worth. I have the tray and mod set.
Anyone know what a SA Hack'd By Geeks from [CTRL]ALT goes for?
About $300 tops
Thank you!
Hey all, just wanted to do a quick price check on MT3 Serika. Comes with Latin Alphas, Modifiers, Novelties, Geometries and Extra Mods for 275€. That a fair price?
This is from Golden Star Keycaps, does any friends know what's it worth?Show Image(http://)
This is from Golden Star Keycaps, does any friends know what's it worth?Show Image(http://)
The sale for this was 2 days ago. It's probably worth retail.
I've got a Happy Hacking Pro 2 black with blank keycaps in near new condition. What it worth these days? I'll probably eventually get the Bluetooth one
I've seen most HHKBs go for like $160-180
I wouldn't say that it's your fault or anything, but there's so many HHKBs out there that it is not always likely that there will be buyers, especially right now during these difficult times.I've got a Happy Hacking Pro 2 black with blank keycaps in near new condition. What it worth these days? I'll probably eventually get the Bluetooth one
I've seen most HHKBs go for like $160-180
I listed mine for $170 just under 2 weeks ago. It's been viewed 440 times and no bites so far.
I'm not actually in any sort of hurry but how long does a listing like this typically sit before somebody jumps on it? I just want to make sure there's nothing wrong w/ my listing that's discouraging people. It's my first item for sale here and I want to do everything correctly. :)
What's a fair price for a blue alps Northgate Omni key 102? I have the option to buy for 150, but that seems to be a lot.
Was wondering what a GMK Mizu (Base Kit) that is starting to show signs of shining on the WASD keys worth?
thoughts on pricing for TGR 910 SE, pink?
This is a Duck Blackbird v1 that I have had since the GB. I am curious about its approximate worth. It is black top aluminum, silver bottom aluminum. It has very light use, Gateron blue switches, and GMK Terminal keys. I have been out of the market for a while and was wondering what the V1 Duck keyboards are worth lately. I also have an Octagon V1 in red if someone knows what those are worth these days as well. I was going to post some clacks but saw the rules and gonna have to look elsewhere to price those. Thanks to anyone who helps.MoreShow Image(http://www.adamfalwell.com/img/duckblackbird.png)Show Image(http://www.adamfalwell.com/img/octagondeepspace.jpg)
Thoughts on a Grey/Dark Grey KBD75V2 with:MoreBrass Plate
Brass Weight
Gateron Black Inks Filmed and Lubed with 205g0
Smokey Durock Stabs also lubed with 205g0
And how do soldered mill-max hotswap sockets usually affect the price of a board?
Thanks for any and all input!
JTK Sophomore keycap set? Orange/Black.
It's been sitting in the back of a closet ever since I got it back in 2015 and I... don't actually like orange and black as a colour combination. I think I just got a bit carried away after getting a GMK Carbon set which as minor orange accents.
Not even sure it's worth the hassle of trying to sell, so figured I'd just check here first.
https://geekhack.org/index.php?topic=77300.0
JTK Sophomore keycap set? Orange/Black.
It's been sitting in the back of a closet ever since I got it back in 2015 and I... don't actually like orange and black as a colour combination. I think I just got a bit carried away after getting a GMK Carbon set which as minor orange accents.
Not even sure it's worth the hassle of trying to sell, so figured I'd just check here first.
https://geekhack.org/index.php?topic=77300.0
I'm not sure anyone knows what JTK sets are actually worth. In one listing it's $15 (https://geekhack.org/index.php?topic=102653.0), but that seems pretty low. Sets on Mechmarket in other colorways are $70-80, the notskidata colors seem unpopular for some reason.
JTK Sophomore keycap set? Orange/Black.
It's been sitting in the back of a closet ever since I got it back in 2015 and I... don't actually like orange and black as a colour combination. I think I just got a bit carried away after getting a GMK Carbon set which as minor orange accents.
Not even sure it's worth the hassle of trying to sell, so figured I'd just check here first.
https://geekhack.org/index.php?topic=77300.0
I'm not sure anyone knows what JTK sets are actually worth. In one listing it's $15 (https://geekhack.org/index.php?topic=102653.0), but that seems pretty low. Sets on Mechmarket in other colorways are $70-80, the notskidata colors seem unpopular for some reason.
Thanks, I did some digging around and concluded they are worth nothing- this was one of their earlier sets, and by the sounds of it, it was not a particularly good one (inconsistent width of font seems to be the main issue).
If you want to get rid of it I'd pay something for it. I have a board in desperate need of basic coverage (the intended keyset has been delayed by months) and the colors would work.JTK Sophomore keycap set? Orange/Black.
It's been sitting in the back of a closet ever since I got it back in 2015 and I... don't actually like orange and black as a colour combination. I think I just got a bit carried away after getting a GMK Carbon set which as minor orange accents.
Not even sure it's worth the hassle of trying to sell, so figured I'd just check here first.
https://geekhack.org/index.php?topic=77300.0
I'm not sure anyone knows what JTK sets are actually worth. In one listing it's $15 (https://geekhack.org/index.php?topic=102653.0), but that seems pretty low. Sets on Mechmarket in other colorways are $70-80, the notskidata colors seem unpopular for some reason.
Thanks, I did some digging around and concluded they are worth nothing- this was one of their earlier sets, and by the sounds of it, it was not a particularly good one (inconsistent width of font seems to be the main issue).
what are the holy pandas v2 stock worth (coming with the factory lube)
Long time lurker, but had to create a user account now, as I have some keyboards that sadly have to leave the collection.200 would be a ballpark for the SSK.
Needs must, so firstly I need a valuation of this unused, boxed IBM SSK. I think the pictures tell more than I can describe in words so hopefully some of you could get me a ballpark number for one of these?
Bunny lake oroginal hyperfuse?
YesBunny lake oroginal hyperfuse?
F8 included?
Looking for a price check on a new and unused GMK Triumph Adler set from the original Massdrop run back in 2015. Anybody know what I can sell it for?
What are Nixies worth?
What are HHKB Pro 2’s going for now a days?
Sent from my iPhone using Tapatalk
price for OG cherry dyesubs in ISO-DE w/ 7u spacebar?They're very numerous. From my experience with them, I'd say no more than $75-80 shipped.
Any idea what a NIB NEC 9801-98 or Hirose Orange switches are worth?
Also any idea what OG Bongo Cats are going for?
Bought a grab bag of keys on here years ago and wife is making me clean up so these have to go. These look like they fit some various POS machines as some have non standard stems and the the ones with cherry stems have two stems per key so they won't really work on any normal board. Are these worth anything or should I just trash them? (Attachment Link)These honestly probably wouldn't go for much so if anything you could just offer to ship them out to someone who may want them!
Been out of the game for a bit and found these tucked away. Would love some help on pricing :)i am really curious about where does that mirror's edge cap comes from quite interested to be honest, having a dedicated runner button :)
Any idea on the current worth of a Sky Blue LZ-S (https://geekhack.org/index.php?topic=69764.msg1675546#msg1675546) ?
Any idea on the current worth of a Sky Blue LZ-S (https://geekhack.org/index.php?topic=69764.msg1675546#msg1675546) ?
Any idea on the current worth of a Sky Blue LZ-S (https://geekhack.org/index.php?topic=69764.msg1675546#msg1675546) ?
A dented one sold for like 1k a year or two ago, so I'm sure a pristine one is worth much more than that with how much prices for everything else has gone up
Jesus.Any idea on the current worth of a Sky Blue LZ-S (https://geekhack.org/index.php?topic=69764.msg1675546#msg1675546) ?
A dented one sold for like 1k a year or two ago, so I'm sure a pristine one is worth much more than that with how much prices for everything else has gone up
What's the going rate for a well used set of OG desko complete with dot homing keys, dyesubs and pbt rgb mods?I think, given usage, it's probably gonna be like $100-150? Especially if yellowed and shined. I don't think I've seen any Desko sets sell for more than $150-180, when there's CRP to boot for full PBT after that price range.
What's the going rate for a well used set of OG desko complete with dot homing keys, dyesubs and pbt rgb mods?I think, given usage, it's probably gonna be like $100-150? Especially if yellowed and shined. I don't think I've seen any Desko sets sell for more than $150-180, when there's CRP to boot for full PBT after that price range.
There's probably exceptions but that's about the average I've seen across eBay and the known marketplaces.
Hi hi! I came accross Cherry G81-3015HAR a couple months ago and only now have realized that I can't find any info on it! It's a French Canadian ISO with some neat doubleshots (sub-legends too!). It's got mixed a-b profile keys on the bottom row. Needs a good cleaning ;DI can't really tell you about the price, the only thing I can say is that it's definitely not 3015har, because otherwise it would be the Cyrillic version, please disassemble it, and there should be a badge with the exact name on the plate
Curious what people think it's worth?
I met a nice fellow who's interested in buying, but I just wanted a second opinion before settling on a price :]
(Attachment Link)
(Attachment Link)
I can't really tell you about the price, the only thing I can say is that it's definitely not 3015har, because otherwise it would be the Cyrillic version, please disassemble it, and there should be a badge with the exact name on the plate
so my father in law was cleaning out his garage and gave me an "old keyboard" just wondering what it might be worth?
gave me an "old keyboard" just wondering what it might be worth?
Could soemone give me a estimate for a new (unbuild) Duck Octagon V2 in blue-gray with shaped polycarb bottom?The last sale I saw was for $400 plus shipping.
Im considering selling some boards I never built, but honestly have no idea how to price stuff....
IBM SSK NIB unopened?
what their value was, and how much they would be worth right now, or after I bolt mod them.
Ludicrously, they are probably worth less after a bolt mod. People who buy Model Ms want virgin, "undamaged" specimens.
Occasionally, you hear from an owner who wants his own M bolt-modded, but that is rare.
how much would you say my Model M's are worth?
Wondering how much one of these is worth secondhand, assuming it's in decent condition and the internals work.
Top 10 questions science cant answerWondering how much one of these is worth secondhand, assuming it's in decent condition and the internals work.
I'd like to know as well.
GMK 9009 R2(?) New$180
Ansi Doubleshots
Red alert DCS with RoW and RoG mods.
Japanese pingmaster with Hasu converter NIB.
I have a Norbaforce and Norbatouch. I don't need 2 TKL so willing to sell the Norbatouch, tactical black. Perfect condition with original norbauer box as well. Has BKE light domes.Should be like retail ish for the case $200 on Norba case, $250 on the Novatouch
Thank you bb :-*GMK 9009 R2(?) New$180
Ansi Doubleshots
Red alert DCS with RoW and RoG mods.
Japanese pingmaster with Hasu converter NIB.
$65
If this is the original OTD one, like $350 if it has everything, otherwise like $200 for the geekhack one
$150
How much is a brand new KBD67 lite r1 in black worth...brand new still in plastic.
How much is a brand new KBD67 lite r1 in black worth...brand new still in plastic.
Likely no more than retail value.
Hello! It's been a while. Looking to trim down the collection... ^-^Hey, nice to see you around sleepy! I've been wondering the same lately, I wouldn't mind getting rid of mine too..
Original IBM 4704 Model F 107 Key
Not my picture but using the picture for reference.Show Image(https://i.imgur.com/Hfp5RNK.jpeg)
Hello! It's been a while. Looking to trim down the collection... ^-^Hey, nice to see you around sleepy! I've been wondering the same lately, I wouldn't mind getting rid of mine too..
Original IBM 4704 Model F 107 Key
Not my picture but using the picture for reference.Show Image(https://i.imgur.com/Hfp5RNK.jpeg)
This is the latest sale of a fully original, unmodified one for $2301 : https://www.ebay.com/itm/284236884011/
Take that sale price as you will. You might be able to get more, you might not be able to get that much.
I was wondering what my Kinesis Evolution is worth. It is fully cleaned, the switches (MX Vint Browns) feel consistent and fully broken in. There are some marks of wear on the board though, its not too bad.
Curious on prices for Duck keyboards: Octagon V3 and Orion V3
Price check on my silver Lightsaver V1 new never assembled.
I purchased it from Sherryton's group buy in 2014.
What's this baby worth?
(https://i.ibb.co/zJkQdgT/a588c346-978d-4d57-8a23-f9095e9d3087.png) (https://ibb.co/hfqL0NJ)
This is another members pic but mine looks identical
Could I have some help pricing a bunch of outdated keyboards?
Rama M65-A with Aluminum bottom
Kira 60 w/o PCB
KMAC numpad
Duck Blackbird with New PCB and Plate
I appreciate it. Thank you!
I was wondering how much this typewriter could be worthShow Image(https://imgur.com/WTT14Tj.jpeg)Show Image(https://imgur.com/Vbd1ojO.jpeg)Show Image(https://imgur.com/Tuss71c.jpeg)Show Image(https://imgur.com/u0rIDW0.jpeg)Show Image(https://imgur.com/PDqwuhx.jpeg)Show Image(https://imgur.com/CfKodsC.jpeg)Show Image(https://imgur.com/T0NaDds.jpeg)Show Image(https://imgur.com/9ISL8b8.jpeg)Show Image(https://imgur.com/1r95B6h.jpeg)Show Image(https://imgur.com/3ipgEOt.jpeg)Show Image(https://imgur.com/hRzL3NI.jpeg)
thanks a lot
Looking at selling a Port colored Hotswap RAMA U80-A. No internal weight and practically unused.
Price check on Black Bakenko 60? Pretty much new condition, just want to sell it. Maybe 20-ish bucks off retail cost?
Found an old IBM Model F at a garage sale. Curious how much it should sell for. Checked Flea-bay, and I see $90 to $500. :S
Do I have the "BATTLESHIP" KEYBOARD version because of the black back?
the $2200-2400 price range. Is that still appropriate?
I'd like to know the approximate price of these two boards:The value of the G81-1000HAE depends a tonne on condition. Post pics.
- G81-1000HAE with OG doubleshot Spanish ISO
- Access IS AKEOXPB312/2
Thanks so much!
I'd like to know the approximate price of these two boards:The value of the G81-1000HAE depends a tonne on condition. Post pics.
- G81-1000HAE with OG doubleshot Spanish ISO
- Access IS AKEOXPB312/2
Thanks so much!
made by Lexmark, May 1995, p/n 1369050
Wondering what the approximate value of this model M is? Does the Dell nameplate make it a bit more valuable or less?(https://bl6pap004files.storage.live.com/y4mYRneUbCN9He5f8DG0ilfILr6laN0HbRASvgLnggD__1QRDaPj7rbxJa8Ph5jihnQgyNq4XlqG3dNi8O_hb8WsY2lPt3LAWPIn9VRtBvniQPRUqI1810-Zvv41V-Mz7PnlroKDRMXRKRsQwngsXCH-jgHGf8xlaGb3xotAHAsGMx46HrRRVhawPSBMn3QrguR?width=4032&height=1908&cropmode=none)
It's made by Lexmark, May 1995, p/n 1369050. Original 1-piece keycaps, affixed cable looks near mint, all keys register and everything buckles.
Hello my dear Keybordlovers
I have a Wooting Lekker Edition from a limited Pre-Order and I have absolutely no idea what its worth. What can I charge for that and who whould buy it?
I would be very happy if anybody could give me some input.
Thank you and best regards
Chris
I got an unbuilt Mark 65 that I just found being family put the shipping box inside another larger box....
Dunno pricing so seeking a price check
Items
BoardSource The Mark 65 - Space Grey (plate attached is gold)
Came with Switches+stabilizers - Durock T1 - smoke color (still in bag unopened)
a 65% foam insert (3rd party that I bought afterwards)
Also spares:
Spare Plates - 3 [Silver + Light or deep Gold (the other gold they offered), space grey]
Spare PCB - 4
hi folks,
I entered some little giveaway thing and won a HHKB 25th Anniversary Function key, sticker and key cap remover directly from Fujitsu.
I'm not really that interested in it, but maybe worth a few bucks -- what do people think?
Thanks!
(Attachment Link)
Wondering what my Ikki68 Aurora R2 in Fog would go for. GB didn't happen that long ago but it was $150.
https://shop.wuquestudio.com/products/ikki68-aurora-r2?variant=41700227776682 (https://shop.wuquestudio.com/products/ikki68-aurora-r2?variant=41700227776682)
I've got a few things I would like to find a new home for. All are in great condition, theyve been stored for over a decade. They are in CZ (EU). I'll start with the normal ones and get to the model Ms at the end...
Two Zenith Data Systems ZKB-2 keyboards (one has the alps rubber bumper from an SGI and shortened springs for lower force) with a third for parts (its missing the "9" numberpad key and the quote key, otherwise works)
A SGI marble gray keyboard in great condition with the typical yellowing spacebar.
Model M PN 1391401, 18SEPT89 (USA) in excellent condition
Model M PN 1390120, 05NOV86, with the square IBM logo in the upper right. Excellent physical condition, following keys dont register: left ctrl, delete, numberpad 4. I haven't opened the keyboard to try to fix it myself.
A pristine Model M spacesaver, PN 1392464 from 25 Jun 87, a rare DisplayWrite version.
They've been stored away in a box under the bed for nearly 20 years... are these still interesting for anyone? :)
Thanks for helping me get an idea of what each of these would be worth these days.
What's an IBM Model M Space Saving Tenkeyless *New In Box* worth ?It will depend on the exact part number of yours. Different variants/ages carry different values.
Purchased it many many years ago from a Seller, username ComputerW2K, literally unused, even with a few broken rivets (from shipping) still inside the case, then kept in storage....
I have two NIB, may sell one but unlikely as I don't need the money and too old to be bothered.
Apology for no images, they're buried inside boxes along with other old keyboards Northgates, IBMs, Chicony....can't remember................as I said, can't be bothered.
Hello :)
I found a set of GMK Metropolis R2 (Base, Sign, Blocks & Deskmat Standard). They are Completely new and in Original packaging.
Could someone tell me what they would be worth if I would sell them?
Thanks for the help.
2x Original doubleshot Geekhack MX caps.
Part of the original run, initially bought by BitFlipper and I bought two off of him. Pictured on the boards they currently live on that are fresh out of storage. No idea what price they go for now, been away from keyboards for years, and am now rationalizing my collection to stuff I'll actually use (IBM and MX blues mostly).Show Image(https://i.imgur.com/6eqUL74l.jpg)Show Image(https://i.imgur.com/nIyHQKRl.jpg)Show Image(https://i.imgur.com/RnOXbbAl.jpg)
2x Original doubleshot Geekhack MX caps.
Part of the original run, initially bought by BitFlipper and I bought two off of him. Pictured on the boards they currently live on that are fresh out of storage. No idea what price they go for now, been away from keyboards for years, and am now rationalizing my collection to stuff I'll actually use (IBM and MX blues mostly).Show Image(https://i.imgur.com/6eqUL74l.jpg)Show Image(https://i.imgur.com/nIyHQKRl.jpg)Show Image(https://i.imgur.com/RnOXbbAl.jpg)
Honestly not all that much nowadays since artisan keycaps effectively replaced the spot keys like this held in the community back in the day. Realistically I'd say tops around $20 to $30 a piece to someone who appreciates the history behind them all the way down to the the retail price of like $3 to $5 a piece depending who would be willing to buy them. Someone correct me if I am wrong, but that would be my valuation of them.
I fell out of MK's and put all my hobby time into photography (sony a7cii), so I'm thinking of trying to liquidate for camera gear. Any thoughts on value of these?
Keebs, all clean - not even pricing the keysets
IBM Model M (7/31/92) ($150?)
Poker II PKX-6100 ($60?)
MS Designer White ($20?)
BigTuna Miuni32 Rev1 with a CNC aluminum housing/plate I made, gateron whites ($120?)
BigTuna Miuni32 Rev1 extra PCB ($10?)
BTC (Behavior Tech Computer) PS/2 5100C ($40?)
JD Carpe JD45 Rev0 (2015) Cherry MX Brown, custom CNC aluminum housing/plate ($200?)
Then I have a mystery KB (orange/white keys, pcb photo included) with a 8/9/2019 date, 65% with cherry mx red linear rgbs (??)
Artisans (all MX & circa like 2016)
Booper x KeyKollectiv - Kosmonavt - Challenger (OG, Purple in Cyan)
Aero Keys - Mechashark Peach
KeyForge - Saber - Wisteria
Zorbcaps Entling v2 Forest
???? Lil glow in the dark alien guy