geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: alaricljs on Tue, 04 September 2012, 15:56:40
-
Cherry MX stabilizers in PCB or plate mount. This is September 1st if you're jet-lagged :)
OVER -- Parts received, space bar wires being bent.
What is on offer:
Cherry MX 2x unit stabilizer sets. Custom bent spacebar wires for any spacing you need (6.25/7/??).
86 key boards use 4 2x and 1 7x stab
101 key boards use 7 2x and 1 7x stab
Please PM your order as such:
# PCB
# PLATE
# WIRE (SIZE)
The WIRE includes *just* that: a wire, bent to your length specs. You will need a PCB or PLATE mount stabilizer to put it in. 7x is the key cap size, 4.5" is the distance stem to stem (on center). Stem to stem in inches is the safest bet if you have an odd request.
Typical 84/86key board is 4 2x + 1 7x:
5 PCB
1 WIRE (7x)
Typical 101key board is 7 2x + 1 7x:
8 PCB
1 WIRE (4.5")
Random order:
10 PLATE
1 WIRE (6.25x)
1 WIRE (7x)
2 WIRE (3x)
Pricing:
PCB Mount 2x stabilizer (+~$10 shipping split between the buyers):
1-24: $.58
25-99: $.54
100-249: $.50 <--- We are here
PLATE Mount 2x stabilizer (+~$10 shipping split between the buyers):
1-49: $.76
50-99: $.66 <--- We are here
100-249: $.55
WIRE - custom bent to your specs
$1 per wire
Shipping to you is additional and we'll work that out when we get there.
-
Final collected orders 9/11/2012 midnight (sorta)
75 Plate
191 PCB
60 Wires
14 orders, lowest: $3.76, highest: $26.93
-
........
-
Order sent.
5 PCB
1 WIRE (7x)
-
Uh guys, what happened to all the interest? This GB is gonna collapse without more orders.
-
I will order some plate versions to replace the asstastic costar on my Chicony... and some extras so I can do the same on any board with costar I happen to acquire in the future.
-
:'(
-
18 pcb
5 Wire 7x
2 Wire 4.5x
-
lysol: costar/cherry plate mount footprint is completely different. You sure you want to attempt that?
-
I am going to be doing switch swap and paint the plates anyway. It should not be too hard to modify the plate for it I don't think. If it dosen't work out I am only out a few dollars.
-
I need these for the following:
1x KMAC winkeyless
1x Cheat winkey 1.5x1x1.5x
1x LZ87SE winkeyless
1x K-Mini
1x Plate mounted Poker
Can anyone recommend me what I need? I'm not sure whether I need Plate or PCB
-
pmed for 3 7x wires and 15 stabilizers.
-
KMACs are PCB, images I've seen of A87 are PCB, images of the Cheat are PCB,
-
lysol: costar/cherry plate mount footprint is completely different. You sure you want to attempt that?
But they'll still work on the phantom, right?
-
Phantom has a combo cutout for costar and Cherry.
-
I need enough to do 3 Kmac winkeyless.
-
^
15 PCB
3 WIRE (7x)
-
If you have not PM'd me your order then it never happened.
-
^
15 PCB
3 WIRE (7x)
Ordered...thanks
-
Was the IC thread removed? I had calculated what I wanted and posted it in there and now I can't find it.
-
Was locked, but you should have no issue finding it... it's in Making stuff... found it (http://geekhack.org/index.php?topic=34934.0)
-
5 x pcb
1 x 6.25x for KMAC with winkeys?
-
pm sent
-
Ok folks, we've got the majority of previously interested parties ordering and some new faces. I don't want to leave this running forever. Sept 12th is the cutoff as of this moment.
-
Bumped the end date forward to Monday the 10th...
-
I am contemplating getting a few more. I see that I am way behind the others if only the listed ones and a couple of others ordered and we are already over 100 on each item.
-
Put more stats in post 2 for the curious. The odd totals are due to me already adding in a shipping to me approximation, then there's additional shipping out to you.
damorgue, I'd say you're in the average range whereas DanGWanG is at the top end ;)
-
I just got too much **** to build >_>
-
At least you're not blowing a few hundred on something you may or may not see in a year or so.
-
Ok, had one drop out but we're still moving forward. This closes midnight ET today!
-
Should I get more or not?
that is the question
-
More now is cheaper, and you can always list them in the classifieds at a later date if you were wrong. That said, it's a fairly cheap mistake if you can't get rid of them and don't go overboard with your order. :)
-
Had to count how many I already got, got a few already. I think I'll be ok with the ones I have ordered from you. I should get some costar ones some day though.
Edit: Doesn't the Ergodox use stabilizers for the thumb keys? They aren't listed in the parts list.
-
Rendering says yes.
-
I know these are for the Cherry style stabilizers, but can I order 2 more 7-unit wires and you bend them for Costar for me?
-
I don't have that size wire handy, it's also a whole lot more complicated of a bend job. I hear litster has spares if you are willing to wait until all phantom orders are accounted for and verified by the recipient. :)
-
order sent!
-
Ok, thanks. I was just wondering. :D
-
Just noticed this GB and put in a last minute order ;D
Thanks!
-
It's oooooooover. Thanks :) Get back to you soon with more info. Thanks all 17 of you!
-
Just ordered the parts.
-
Rendering says yes.
Rats, I knew I was forgetting something.
Looks like I'll be taking apart my WYSE PCE 'board after all . Thanks anyway!
-
can i get enough for a kmac mini >.>
-
ygpm* demik
you gotta purdy mouth
-
Anyone that submitted orders late will have to wait until after everyone else gets dealt with. I may have enough to cover what was requested.
-
Wow, WYSE PCE 'boards have an extra set of stabilizers (9 total), so I grabbed some spares from there. (that way I won't need any extras)
Cherry stabilizers don't fit in the phantom that well, but it looks like they'll work. I might be able to put some paper or plastic in there to make it work better.
I also found out that you can remove and replace individual switches that are plate mounted. It's not even that difficult.
Thanks for running this GB, alaricljs.
-
Is anyone interested in costar ones too? Shipping from WASD for just a couple is a *****.
-
Is anyone interested in costar ones too? Shipping from WASD for just a couple is a *****.
I am. I want to see if they fit any better or worse than the cherry ones. I like variety.
-
PCB mount stabs have arrived, 1/16" wire also arrived. Waiting on the plate mounts and I'll start bending wires next week. I got sent on a business trip to Utah again at the last minute.
-
PCB mount stabs have arrived, 1/16" wire also arrived. Waiting on the plate mounts and I'll start bending wires next week. I got sent on a business trip to Utah again at the last minute.
Woot.
-
So far, me and dorkvader are interested in costar ones as well. Does anyone else want them?
-
Any chance of getting a couple of 6.25 unit space bar wires?
-
You talking to me or damorgue? :) I should have extra material if you are looking for Cherry stab compatible.
-
PCB mount stabs have arrived, 1/16" wire also arrived. Waiting on the plate mounts and I'll start bending wires next week. I got sent on a business trip to Utah again at the last minute.
magical underpants!!
-
Okey doke, plate/PCB mount parts and 2x wires counted into little treat baggies. Gonna work on the bendy bits.
-
Quick update:
Mother in law is in the hospital, shipping envelopes are still in transit, space bar wires need bending. I've done some tests and need to "build" a jig (cut piece of wood, plane to 1.5", mount on board).
No worrying, especially since you still have your money! ;)
-
So far, me and dorkvader are interested in costar ones as well. Does anyone else want them?
No one else?
-
Okey production is going well, expect invoices, 2 shipping choices... padded envelope, ~$2.75 small box flat rate priority $5.15
edit: non-uniform flatness surcharge brings that to $3.50, sorry.
Weeeeee
-
Oh yeah, more good news... I hope you're paying attention. If you are NOT in the US, please don't bother paying until I have your address and you inform me of your shipping choice. I need to calculate intl shipping rates.
Toooo many details!
-
If you paid, your stuff is packed and ready to go, a lot of labels printed but I ran out of tape...
Everything paid for goes out in the morning.
For those that haven't paid: I am finishing wire production this evening... tomorrow ~midday I am leaving on a business trip that will mean I cannot ship anything until Saturday. Pay tonight if you want it shipped tomorrow.
-
Tape has been achieved, all production is finished... still waiting on some payments.