check to see if this guy is still selling.
Topre 87u for $200 http://geekhack.org/index.php?topic=37820.msg724271
You'd prefer to spend more?
A used fullsize would be ideal, as long as they come out looking clean, what about caps for them?
I got a ton of precut Plexiglas for a project that I was working on that is the right size. I'll post pics of it when I get home
That's some huge profit.
Definitely in for one of every topre weight! Not sure the best method for attaching them to a base though.
Awesome idea. I'd be in for one or two. Maybe get 2 boards with different spring force so we'll have more than one to choose from?
Reaper has one of those realforce topre keychains. Maybe he can tell how it was made? I believe those are acrylic as well.
just sent you a pm.
Ok guize, here's whats going down, someone has offered me some spring of varying weight, as of right now it's mostly 45g, with a few 40g, 35g, and 30g. I'm thinking this would be OK for a first round, and try to get 55g springs for a later round. However I'm not sure how long it will take to build some usable chains, and if it ends up taking too long, we could easily just get 55g + some other weights added on.
This was just a lil' update, hopefully I'll have something functional by the end of this year, or super early next year. I'll be sure to keep you all updated!
These are OEM springs or something from another company?
^ That's neat.
I should be able to laser cut the bases relatively cheap out of aluminum or stainless steel. My guy does do acrylic, but he doesn't like to since he has to raise the laser head so the focal point isn't what it should be so the cuts aren't that nice
If that's something you want to do, lemme know
I should be able to laser cut the bases relatively cheap out of aluminum or stainless steel. My guy does do acrylic, but he doesn't like to since he has to raise the laser head so the focal point isn't what it should be so the cuts aren't that nice
If that's something you want to do, lemme know
Cooooool. What kind of thicknesses could one get with aluminum or stainless steel?
As for the acrylic, I know for sure I have access to an acrylic laser cutter, and it seems to produce some pretty quality cuts. (A friend did a project with cut acrylic, and it came out pretty spiffy)
I should be able to laser cut the bases relatively cheap out of aluminum or stainless steel. My guy does do acrylic, but he doesn't like to since he has to raise the laser head so the focal point isn't what it should be so the cuts aren't that nice
If that's something you want to do, lemme know
Reaper has one of those realforce topre keychains. Maybe he can tell how it was made? I believe those are acrylic as well.From what I've seen, they have a special (clear) switch housing. Probably a better idea is to copy the mrinterface ones from the DT switch try bag which are, I believe, just topre switches screwed to a small piece of acrylic. (2 screws if memory serves.)
These are OEM springs or something from another company?
These will be OEM springs/rubberdomes from a Topre Realforce board.
It's the rubber dome not the spring that decides the weight of the switch.
I'll be in for 1-3
These will be keychains right? I'm still using my official one with my keys but in case it breaks i want backups ;o
If you guys need any close ups of measurements of my rf keychain let me know.
I felt that the ones included in the switch try bags were a bit off. Ensuring that they are made in a way that properly replicates the original switches in mounting distances and feel is probably a good idea.
http://geekhack.org/index.php?topic=39001.0
:eek: :eek: :eek:
My body is ready and willing for at least one of these. Eagerly awaiting the next set of pictures. Maybe when this concludes I'll finally get to see what topre feels like.
http://geekhack.org/index.php?topic=39001.0
:eek: :eek: :eek:
You get the dyesub realforce cap, totally worth it!!!
E: Oh also, Part 1/3 of our casting round two http://imgur.com/a/X6gXj !!!
Looking forward to see progress on this. Interested
THREAD'S OVER GUYS! MrInterface beat me to the punch!
I have one of the switch testers coming to me, I'll see how well it would work as a keychain :D
I have one of the switch testers coming to me, I'll see how well it would work as a keychain :D
:o you got into the Round 3?
Aw, have we not invented the way to get these keychains yet? ;D
I should be grabbing a topre keychain, not confirmed whether its original or improvised, soon ;D
I should be grabbing a topre keychain, not confirmed whether its original or improvised, soon ;D
The blue/red ones that are big $$$?
He doesn't exactly explain where to get the Topres switches from, nor the clear plastic base, nor the rubber bit either.I should visit more often :-)
Having a drill press would make it easier, but with a steady hand you could mount the housing in a vise and use a hand drill.
For anyone to attempt this we'd probably need to start by buying a Topre keyboard ...
I should visit more often :-)
Didn't know peeps over here were working on those Topre Testers as well.
I got the rubber bit, the topre switches and springs from a perfectly fine Topre Realforce 103UB 55grams.
This one got its head cut off : http://www.mrinterface.com/keyboardsims/realforce103ub/index.html
If you want the CAD designs for the acrylic base plates , you are more than welcome to PM me and I'll send them. One thing I would like to add is a small extrusion with a hole in it so it could be worked into a true keychain :-)
For those who can't wait to try a topre : I'll be sending my next iteration of the topre tester around soon. Check the try before you buy thread over on DT.
Regards.
Sirclickalot aka Mrinterface
Argh!!!!
Also, you never replied to my email I sent through your site ;_;
Argh!!!!
I did not set up my catch-all email after I updated my site :(
So, that's the reason why I never answered : I have an enormous amount of email on my mrinterface mailbox. I'll sift through it and try to answers yours.
Thanx for pointing this out to me. Should have checked if it worked before I launched the new site.
Good luck with cutting those acrylic plates! At first I did those by hand ( with a dremel ) and they were only used for my first proto's. All in all I think I waisted about 10 switches before I got the design right....
no
I know ... Soon™
no :)
Line Item | Cost |
Topre Switch | $1.50 |
Topre Cap | $1 |
Acrylic Base | $1 |
Screws | $.50 |
Packaging | $1 |
Misc. | $2 |
Basic Total | $8 |
How about space bar cap!
Group buy!! Take my money!!! ;D
The wallethack is strong in this one... Seriously very excited, holding off on buying a Topre until I try the keychain. Do you have a more solid date for release?
I am skeptical it will feel the same as pressing a key on a real Topre board.
To me though, it doesn't matter - I still want one just as bad!
I just want a legitimate vessel for my clack :D Also nice to be able to show people what exactly is inside the switch - that's why I didn't go for the prototypes. I want that clear acrylic base.
Right, probably a good deal. Only need one though, and hopefully it will be under 20 bucks (speaking realistically here, there's always a wrench being thrown into the gears at some point)
customization
Customization?
Any updates on this? Also interested.
Any updates on this? Also interested.
Hush my child. I'm having to carry a team project on my back this semester, I have little to no free time.
Btw, never do group projects, 2/3 of the group will be 100% useless :P
So true. Teams of 3 are perfect, any more than that and the work begins to spread unevenly.Any updates on this? Also interested.
Hush my child. I'm having to carry a team project on my back this semester, I have little to no free time.
Btw, never do group projects, 2/3 of the group will be 100% useless :P
Im in for one
I need one
huehuehuehue
K guize. simple. Finals next week. then summer. summer = freeish time = topre keychains. I promise. <- lies
This is how I'm going to try and do it. I'll open orders on like a Friday or something, but only let like 10 orders a week so I don't go crazy trying to mash these out. I'll have more information as the time approaches. Also I may have _misplaced_ the large bag of topre parts, BUT HAVE NO FEAR. I was going somewhere good with that. oh well. maybe next time.
Just keep an eye on this thread (like you already have you weirdos) and I'll keep everyone as up to date as possible. k bai <3
PPPSPSSPSPS: come hang out on IRC, you can bug me there 24/7 (but will I respond is the question)
just wondering how many were sold in the beta release.....i have aquired one and was wondering if i can say its rare :p
K-BRO WHERE MY KEYCHAINSS??? I want like 18 broo :-*The lord hath spoken! Make it so.
updatesss!!!!
In all seriousness, was just curious if you've had time to look into producing these again.
Would love one :D
no he dead
no he dead
D:
It's been forever since an update was made, I think OP scrapped the idea
It's been forever since an update was made, I think OP scrapped the idea
OP is so (づ。◕‿‿◕。)づ
CLiB and I were discussing in IRC how easy it would be to destroy a $300 Realforce board to make a bunch of Topre keychains for everyone to enjoy! So I've decided to do something about it!
I want my $10 keychain already, scammer!
Show Image(http://i.imgur.com/VfuW8IH.jpg)
Wow so fast! Can't believe it's already here. D-Squad is the best!!!
Show Image(http://i.imgur.com/VfuW8IH.jpg)
Wow so fast! Can't believe it's already here. D-Squad is the best!!!
Show Image(http://i.imgur.com/VfuW8IH.jpg)
Wow so fast! Can't believe it's already here. D-Squad is the best!!!
it found a home pretty quickly I see.
I still get one of the finished ones for being a tester, right?
I still get one of the finished ones for being a tester, right?
If I remember.
I'll just PM you a couple times an hour to remind you, k?
I'll just PM you a couple times an hour to remind you, k?
just keep it under 600 (´・ω・`)
Does this mean he's coming back?You should post in there if you want him back https://geekhack.org/index.php?topic=87706.msg2381397#msg2381397
HI KIRKLEHe's a good guy
Does this mean he's coming back?You should post in there if you want him back https://geekhack.org/index.php?topic=87706.msg2381397#msg2381397HI KIRKLEHe's a good guy
Show Image(http://i.imgur.com/VfuW8IH.jpg)
Wow so fast! Can't believe it's already here. D-Squad is the best!!!
Maybe if he wasn't banned from the forum :thinking:
Does this mean he's coming back?
You should post in there if you want him back https://geekhack.org/index.php?topic=87706.msg2381397#msg2381397