geekhack

geekhack Marketplace => Classifieds => Topic started by: cgbuen on Wed, 26 December 2012, 01:12:14

Title: [FS]
Post by: cgbuen on Wed, 26 December 2012, 01:12:14

(http://assets.christopherbuenaventura.com/img/keyboards/fs3/ft-02.jpg)

___________________________

Gone

More

Modded Filco MJ2 TKL, no caps $120 + priority shipping
Mint Skull CC MX TRADED
Assembled bpiphany Filco controller $22 + shipping
Brand new QFR keycaps $10 shipped CONUS
G80-8200 cable only free + shipping
Black Gas Mask (green eyes) $19 + shipping
HHKB Black Printed Keyset $30 + shipping
Full-Size Filco MJ2 [stickered/lubed vintage blacks/45g springs/front-print keycaps/50A o-rings] + DSA Retro [alpha, plum mods, 1x mods, spacebars, other extras] $220 + shipping
Blank black TKL caps $10 + shipping
QFR [universal plate/stickered/lubed vintage blacks/45g springs/no keycaps] $130 local pickup
Switch Sampler Plate Set $48 + shipping
Vintage Black Springs $0.10/spring
WYSE WY85 Keycaps $8 + shipping
RadioShack Desoldering Iron (solder sucker), half-used tip, and 4 brand new spare tips $13 + shipping
WYSE WY60 Keycaps $10 + shipping
Boost PBT RGB (Winkey - 1.25x) with extras $30 + shipping
QFR with MX Browns $55 + shipping
GMK/Originative RGB (Winkey - 1.25x) $28 + shipping
Naked G80-3494 modded to MX Blues $49 shipped CONUS
Cherry white on black doubleshot POS partial keycap set + replacement options $40 shipped CONUS
Cherry white on black doubleshot keycap set from an MY board + extra universal spacebar $18 shipped CONUS
Cherry beige lasered PBT POS set + ISO adapter kit $18 shipped CONUS
98 Vintage WYSE blacks $30 shipped CONUS
Ducky 17” wrist rest $21 shipped CONUS
Red-eyed gas mask $22 shipped CONUS

Title: Re: [FS/FT] G80-3494 with Blues, Cherry Keycap Sets, Vintage Blacks, mbc RGBY & More
Post by: Gupgup on Thu, 27 December 2012, 22:45:17

PM'd you about Beige set, PM back please :)

Title: Re: [FS/FT] G80-3494 with Blues, Cherry Keycap Sets, Vintage Blacks, mbc RGBY & More
Post by: jeroplane on Fri, 28 December 2012, 01:23:40

Is Item B fully compatible with modern keyboards? I.e. are the 1.25x mods centre-stemmed, as well as the Caps Lock? If so, could you give me a quote for international shipping?

If the Caps Lock isn't, I wonder if you could include the Moogle Caps Lock with Item B?

Title: Re: [FS/FT] G80-3494 with Blues, Cherry Keycap Sets, Vintage Blacks, mbc RGBY & More
Post by: Gupgup on Fri, 28 December 2012, 10:40:49

Payment sent! Thanks!

Title: Re: [FS/FT USA] G80-3494, mbc RGBY, Gasmask [LF] WYSE moogle, springs, stickers
Post by: lawxninja on Wed, 02 January 2013, 23:11:32

PM'd about the gas mask. Thanks.

Title: Re: [FS/FT USA] G80-3494 [LF] 55g, 62g, & 65g Springs, Plastic Covers
Post by: kalgalath on Wed, 09 January 2013, 09:09:00

Bump!

Just wanted to push this back up to the top and say thanks for the great transaction cgbuen!

I purchased the Ducky Wristrest that was for sale.  Not only does the wrist rest look brand new, the communication was quick and excellent.

Title: Re: [FS] New Stuff [LF] Quarzac WYSE Moogle, Beige Filco TKL Case/Cable, O-Rings
Post by: WhiteFireDragon on Tue, 12 February 2013, 23:39:57

Quote

- 1mm Width o-rings, 50A or softer, a la "Pack D" WhiteFireDragon's 2012 GB (http://geekhack.org/index.php?topic=25714.0) (picture (http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/Orings-2.jpg)) (looking for anywhere up to 300 of these)

These can't be bought in any stores, that's why I had them custom made. I think only 1100 were ordered, and I know the guys that ordered those won't want to let them go. You might want to PM sordna, he bought 200 I think. Asking for 300 is a longshot.

Weren't you the one that got lucky and bought my person set?

Title: Re: [FS] New Stuff [LF] Quarzac WYSE Moogle, Beige Filco TKL Case/Cable, O-Rings
Post by: cgbuen on Tue, 12 February 2013, 23:44:52

Haha, yeah, that was me. Worth a shot to ask, I've been loving them. Didn't realize they were custom made and that the run was that small, I was wondering why that width seemed to be a bit hard to find when looking on different components sites.

Title: Re: [WTS/WTT] Custom QFR (vintage blacks) [WTB] Keycaps, ALPS TKLs, PLUM96, et al.
Post by: metafour on Wed, 29 May 2013, 21:36:56

(https://dl.dropboxusercontent.com/u/5514110/Keycap%20Sales/Photo%20May%2029%2C%208%2034%2037%20PM.jpg)

Still need this?

Title: Re: [WTS/WTT] Custom QFR (vintage blacks) [WTB] Keycaps, ALPS TKLs, PLUM96, et al.
Post by: Rendom on Fri, 31 May 2013, 15:54:29

Nice board, GLWS.

Title: Re: [WTS/WTT] Custom QFR (vintage blacks), Switch Sampler [WTB] Keycaps, et al.
Post by: khaangaaroo on Fri, 31 May 2013, 23:03:03

I think I have a 1.25 DSA shift lock. PM incoming

Title: Re: [WTS/WTT] Custom QFR (vintage blacks), Switch Sampler [WTB] Keycaps, et al.
Post by: SpAmRaY on Mon, 03 June 2013, 15:59:55

Switch Sampler Plate Set $48 + shipping

^^ do you have any pictures of the back?

Title: Re: [WTS/WTT] Custom QFR (vintage blacks), Switch Sampler [WTB] Keycaps, et al.
Post by: SpAmRaY on Thu, 06 June 2013, 21:21:34

ygpm!

Title: Re: [WTS/WTT] QFR with vintage blacks & blank caps [WTB] Keycaps & More
Post by: Photoelectric on Mon, 17 June 2013, 14:43:05

Vintage MX Blacks are really nice!  If anyone has doubts :)  They are slightly lighter than modern MX Blacks and have very low friction, so they feel great!

Title: Re: [WTS/WTT] QFR with vintage blacks & blank caps [WTB] Keycaps & More
Post by: lightsout714 on Wed, 19 June 2013, 18:32:27

pm'd

Title: Re: [WTS/WTT] Custom Filco, Blank Caps
Post by: nubbinator on Sat, 29 June 2013, 00:05:51

Are you only accepting CC or Brobot trades for the Purple People Eater Brobot (and I'm assuming it's MX?). 

Title: Re: [WTS/WTT] Custom Filco, Blank Caps
Post by: cgbuen on Sat, 29 June 2013, 00:13:16

Feel free to send any kind of trade offer, but if it isn't (or previously wasn't) in my looking for list I might not be as likely to say yes.

And yes, the Brobot is MX.

Title: Re: [WTS/WTT] Custom Filco, Blank Caps
Post by: bueller on Sat, 29 June 2013, 06:05:36

You keen to ship the ABS filco caps to Australia? If so I'll take them!

Title: Re: [WTS/WTT] Custom Filcos, Blank Caps
Post by: acantha on Mon, 01 July 2013, 04:32:01

Would you be interested in selling the retro keycaps seperate from the keyboard they're currently on? cause im dying to get a hold of that set, but don't really need the keyboard.

Title: Re: [WTS/WTT] Custom Filcos/DSA Retro
Post by: TD22057 on Tue, 02 July 2013, 14:50:24

PM sent on the filco+dsa retro...

Title: Re: [WTS/WTT] Custom Filco TKL
Post by: oTurtlez on Thu, 11 July 2013, 08:56:29

YGPM :D

Title: Re: [FS/FT] Custom Filco, Alu Full Dox Case, HHKB Black Printed Keyset [LF] CCs, SSK
Post by: MJ45 on Fri, 26 July 2013, 18:02:29

YGPM

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] Topre CCs, etc.
Post by: esoomenona on Fri, 09 August 2013, 11:16:31

PM me your address and I'll send you that WoB Windows key. You just want one? Or...?

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] CCs, etc.
Post by: scruffles on Sun, 18 August 2013, 14:46:51

ygpm

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] CCs, etc.
Post by: phx on Thu, 22 August 2013, 14:29:30

pmed  ;)

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] CCs, etc.
Post by: KangarooZombies on Wed, 28 August 2013, 02:33:12

ygpm~

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] CCs, etc.
Post by: ohgodpleaseno on Fri, 30 August 2013, 09:11:44

Hey, I've been interested in buying the custom Filco controller for a while now, but I'm not sure if it only works on certain boards? I don't have a TKL and I only see people talking about putting it on that type of board. Would the controller work on a full sized Filco Ninja? If so I'm interested in purchasing it :)

Title: Re: [FS/FT] CCs, Brobots, Filco TKL [LF] CCs, etc.
Post by: cgbuen on Fri, 30 August 2013, 22:46:24

It won't work for full-size Filcos since the shape and pins are different. You would need one of bpiphany's other controllers, the Kitten Paw (http://geekhack.org/index.php?topic=46700.0). These don't come fully assembled so you'll need to do some soldering to get it to work.

Title: Re: [FS/FT] CCs/Brobots/Filco TKL [LF] CCs/Cherry Caps/more
Post by: Dansor on Tue, 24 September 2013, 23:08:51

Sent PM on working bpipheny filco controller.
SUPER interested I'm that:)

 Going to have trouble sleeping tonight thinking of all the stuff I'm going to do with it.

Totally not nerdy...

Title: Re: [FS/FT] CCs/Brobots/Filco TKL [LF] CCs/Cherry Caps/more
Post by: cgbuen on Thu, 26 September 2013, 21:42:56

Assembled bpiphany controller sold.

Title: Re: [FS/FT] CCs/Brobots/Filco TKL [LF] CCs/Cherry Caps/more
Post by: slip84 on Thu, 26 September 2013, 22:34:59

Every time I see this thread, I think you're actually selling CCs and Brobots. Silly me.

Title: Re: [FS] Filco MJ2 TKL - Korean 65g/Vintage Blacks & More
Post by: brighenne on Thu, 31 October 2013, 23:02:22

I've got a 7x Dolch spacebar, that seems like a fair trade for a clack right?

Title: Re: [FS] Filco MJ2 TKL - Korean 65g/Vintage Blacks & More
Post by: cgbuen on Fri, 15 November 2013, 23:51:20

Bump. Small price drop on the Filco.

Title: Re: [FS]
Post by: shrubkeys on Wed, 15 April 2015, 22:43:07

If you're still looking for a 7u space bar, SP has them on their site in both of the original Dolch colors (GE/GX). Cheap, too. Just go to their "Blank Key Packs" and choose a spacebar from the profile you want.

Title: Re: [FS]
Post by: Joey Quinn on Wed, 15 April 2015, 22:53:55

Quote from: shrubkeys on Wed, 15 April 2015, 22:43:07

If you're still looking for a 7u space bar, SP has them on their site in both of the original Dolch colors (GE/GX). Cheap, too. Just go to their "Blank Key Packs" and choose a spacebar from the profile you want.

The last post in this thread is 2013 and the OP hasn't been updated for a year.

Title: Re: [FS]
Post by: shrubkeys on Thu, 16 April 2015, 00:27:43

You're absolutely correct. Must have gotten my tabs confused - probably was a search result I didn't close. Apologies for the necro, everybody!  :-[