Not only does it match your setup, it looks 10x better than stock :P
Wow cool stuff! Doesn't even look like a Razer product anymore - Nick work! Hahaha
It looks great, man. Are you coming to our Toronto meeting ?
http://geekhack.org/index.php?topic=38206.0
Looks beast, real good job.
I hate Razer products....but man, your board looks amazing! Nice work.
Looks good - I like the white and blue. Especially with the white case.
Perhaps the only Razer product where the value may be possibly greater than RRP.
Really like your setup!
Sick color scheme but I'm REALLY digging the space bar. Love how that came out. Did you do that yourself?
I hate Razer products....but man, your board looks amazing! Nice work.
Thanks Akimbo :) I'm glad I was able to salvage it hah!Looks good - I like the white and blue. Especially with the white case.
I thought so too, I spent a bit of time customizing and have a "backup" set to make the keyboard look a bit more uniform (white escape key, white WASD keys, and regular white number keys). But I like the "gamer" setup I have now tooPerhaps the only Razer product where the value may be possibly greater than RRP.
Bahahhaha and it was no easy task. I love the branding, but I just wish they used higher quality and compatibility with getting new keysets in! I had to mod the spacebar so the stabilizers fit properly. You could tell that in this keyboard they definitely went the cheap way on the keycaps to reduce costs. However the Blue MX switches work perfectly!
I had a bad experience before with their headsets too. $150 bucks down the drain within 2-3 weeks; however these trittons im using now have yet to fail me after 2 years time now.Really like your setup!
Thanks pirate! ;DSick color scheme but I'm REALLY digging the space bar. Love how that came out. Did you do that yourself?
I got the spacebar customized on WASDkeyboards :) I just offset it to the right and chose size 18 font I think it was? Thanks a bunch for taking a peek! ^-^
Edit: I got the 'Geek Hack' cap made on there too!
I didn't realize you could do one offs from WASDkeyboards. Thanks for the info man. Also since you're offering up quick responses, did you just swap the LED out to change the color?
You've just earned a spot in my giveaway for this awesome mod, Rapid :).
Holy cow what a cool Razer board. Great job man!
Looks good!!
looks better on the new color theme. It would be nicer if the "glowy part" is grey :P . I love old retro looks :>
otherwise nice paintjob
I was going to keep lurking but I felt the neccesity to say that this keyboard is SICK! You took it to another level, Rapid.
was it hard to add the LED in? i want to do this to my black widow. did you have to add resistor? or just soldered in an LED?
ah i was hoping to put blue or white 3mm LED's on my BW but i have no previous electrical experience, it was gunna be my starter project lol!
Nice PaintJob! I'm thinking 'bout trying this in the future.
Yeah totally! It's so nice knowing that I'm using something that I semi created myself :) Feel a lot more "1337" hah :PAnd did you just spray paint it? Or did you coat it too? How long did it take :O
Yeah totally! It's so nice knowing that I'm using something that I semi created myself :) Feel a lot more "1337" hah :PAnd did you just spray paint it? Or did you coat it too? How long did it take :O
I see, I'll practice on a few other random things before I go onto my board then, just to make sure I don't mess up :|Yeah totally! It's so nice knowing that I'm using something that I semi created myself :) Feel a lot more "1337" hah :PAnd did you just spray paint it? Or did you coat it too? How long did it take :O
One thing that's ESSENTIAL is even if a certain spray paint *cough* says that "No primer or sanding required", it turns out that it actually is required. Overall since I screwed it up without sanding the first time around, the process took like 2-3 days (way longer than it should have). I put the primer coat on first, and finished with it too because I liked the feel it had (smooth)
I see, I'll practice on a few other random things before I go onto my board then, just to make sure I don't mess up :|Yeah totally! It's so nice knowing that I'm using something that I semi created myself :) Feel a lot more "1337" hah :PAnd did you just spray paint it? Or did you coat it too? How long did it take :O
One thing that's ESSENTIAL is even if a certain spray paint *cough* says that "No primer or sanding required", it turns out that it actually is required. Overall since I screwed it up without sanding the first time around, the process took like 2-3 days (way longer than it should have). I put the primer coat on first, and finished with it too because I liked the feel it had (smooth)
But yours really does look great :D
I'm sure you can get "variety packs" of sandpaper at your local hardware stores. Before you leave make sure it's a wet sand, meaning that the board/ sandpaper is somewhat damp. Look for something that goes from 60-250/300 (or anything higher) grit. You start off with the lowest numbers and work your way up, then you put on your first coat of primer wait about an hour or so, then put your white/ whatever colour coat, then continue to wait one hour + additional coats until you feel that there is no "exposed spots". I finished it with the primer at the very end.
Good luck, and thanks! :)
so with these http://www.ebay.co.uk/itm/Ultra-Bright-LEDs-3mm-5mm-10mm-Red-Blue-White-Green-Yellow-Pink-UV-Warm-White-/290736745166?pt=UK_BOI_Electrical_Components_Supplies_ET&var=590073581299&hash=item43b142aace
the blue LEDS at 20mA, and if the board is running around 4.5V i would need ~220 ohm resistors?
no worries thanks for your time man :D
Great looking keyboard. That is a vast improvement over the stock board. Awesome job.
Nice job. Should have just gone and painted right over the Razer logo, too!
That's a nice looking board. I notice you had a NZXT Phantom case, how do you like it? I was thinking about getting one of those and getting rid of my HAF 922.
'white widow'
I see what you did there ;)
OT: Im not a big fan of razer products but this WHITE widow looks splendid!
Also is that a thermaltake level 10 mouse? How do you like it so far?
After owning the Blackwidow Ultimate, I never I thought I'd say this - but that modded keyboard looks hot.
The glossy finish on my RBW-U is absolutely filthy.
After owning the Blackwidow Ultimate, I never I thought I'd say this - but that modded keyboard looks hot.
The glossy finish on my RBW-U is absolutely filthy.
The new one with green LED actually looks pretty good.. don't kill me. :(
After owning the Blackwidow Ultimate, I never I thought I'd say this - but that modded keyboard looks hot.
The glossy finish on my RBW-U is absolutely filthy.
The new one with green LED actually looks pretty good.. don't kill me. :(
I'll grant you that, the body is matte/rubberised plastic. I was kind of disappointed to know a Tournament edition existed sometime after I acquired the BWU. I never use macros on my keyboard, and probably never will.
Great job. Looks really good. ;)
Nice advise on painting the case.. I'm currently considering spray painting my keyboard to white like yours, although I probably won't and use that as an excuse to get something like a white Leopold... :rolleyes:
Wow, looks wonderful!
Nice mod!
old but just sayin mine is pretty cool too....
(http://farm4.staticflickr.com/3700/9110567821_ae2d648550.jpg) (http://www.flickr.com/photos/panicfx/9110567821/)
The tourney is actually built really well, better quality PCB than CMStorm/Costar. But regardless of build quality it feels really cheap to type on
old but just sayin mine is pretty cool too....
(http://farm4.staticflickr.com/3700/9110567821_ae2d648550.jpg) (http://www.flickr.com/photos/panicfx/9110567821/)
The tourney is actually built really well, better quality PCB than CMStorm/Costar. But regardless of build quality it feels really cheap to type on
I like your setup, but that Razer is in the way of the ergo...
Is it the keycaps that make it feel cheap to type on or is there flex in the board?
old but just sayin mine is pretty cool too....
(http://farm4.staticflickr.com/3700/9110567821_ae2d648550.jpg) (http://www.flickr.com/photos/panicfx/9110567821/)
The tourney is actually built really well, better quality PCB than CMStorm/Costar. But regardless of build quality it feels really cheap to type on
The spacebar is flipped, some people prefer it that way. I think the brownish color is just bad lighting/potato camera.
Heyya Geekhack!
So the moment I stumbled across these forums few weeks ago, I knew that there had to be change done to my keyboard!
Now the stock razer keyboard (picture below) I thought looked... Plain. So after a white paint job, brand new keycaps, changed green razer LED to blue added LED to escape button my creation is finally complete!
What it looked like before...Show Image(http://i3.ytimg.com/vi/jOsRc2vokGU/mqdefault.jpg)
AfterShow Image(http://i1275.photobucket.com/albums/y449/KrisMakuch/5_zpsd10b5cfa.jpg)
Matches my setup much better now!Show Image(http://i1275.photobucket.com/albums/y449/KrisMakuch/4_zpsa37b0c6a.jpg)
Just showing off the keycaps (love them)Show Image(http://i1275.photobucket.com/albums/y449/KrisMakuch/3_zps85b0edc9.jpg)Show Image(http://i1275.photobucket.com/albums/y449/KrisMakuch/2_zps51dbcc2b.jpg)
My 1950 Underwood Typewriter now has a friend :p :pShow Image(http://i1275.photobucket.com/albums/y449/KrisMakuch/1_zps63d5687f.jpg)
So after a few stressful days, and several freak outs I can safely say that it's finally done... For now. Might fix up the paint job maybe in the future :)
Now to find myself one of those pesky CC's or brocap! :P
Thank you for looking, and if you have any questions please feel free to ask :)
Edit: Thank you so much for the kind words everyone, I love to hear your opinion!
-Rapid.