geekhack
geekhack Marketplace => Group Buys and Preorders => Topic started by: WhiteFireDragon on Sat, 19 January 2013, 17:09:54
-
This is the official GB, carried over from the IC of these plates (http://geekhack.org/index.php?topic=38623.0). They're $22/plate, in stainless steel with the top face finished in line graining. These plates are REQUIRED for the PCB to be mounted mounted on the case. The plate itself is compatible with Filco, PLU, and CM quickfire TKL cases. Every switch can be taken apart without desoldering, and it's compatible with both cherry and costar stabilizers.
ANS125 - Popular standard layout of mainstream keyboards. ANSI layout with 1.25x bottom modifiers and 6.25x space bar.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_ANS125-rev2.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=ANS125-rev2.png)
ANS150 - ANSI layout with bottom modifiers in 1.5x - 1x - 1.5x and 7x space bar. Popular with Cherry or Korean customs
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_ANS150-rev2.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=ANS150-rev2.png)
ISO125 - ISO layout with 1.25x bottom modifiers and 6.25x space bar.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_ISO125-rev2.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=ISO125-rev2.png)
ISO150 - ISO layout with bottom modifiers in 1.5x - 1x - 1.5x configuration and 7x space bar.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_ISO150-rev2.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=ISO150-rev2.png)
NOTE ON THE FOLLOWING PLATES: there are a few more custom ones that I've added. There are no keycap sets with proper legends that will fully accommodate to these 4 new ones, not even a tsangan kit from SP. Only choice you really have is to get them from WASD, which only comes in ABS and lasered legends if you want a matching set. Otherwise you'll have to mix and match keycaps from different sets, so buy these plates with discretion. If you're unsure, think about also picking up a more standard plate, because there won't be a round2 for these plates.
PRF125 - Profosist's custom layout. Extra 2 keys in the function row, split L-shift key, split backspace, short Enter + 1x, short R-shift + 1x
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_PRF125.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=PRF125.png)
HHK150 - jdcarpe's proposed layout. It's basically a HHKB layout with the extra function row keys that are specific to phantom PCB.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_HHK150.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=HHK150.png)
WFD125 - This is my personal favorite. It's based on ANSI, similar to a HHKB layout but has standard function row and 1.25 bottom modifiers. Easier compatibility with keycap sets.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_WFD125.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=WFD125.png)
RBD150 - Last one for our ISO fans. 1.50 modifiers, split backspace, and short R-shift with 1x function key.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_RDB150.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=RDB150.png)
There must be at least 150 total plates ordered for these price, and MOQ for each design is 15. For plates that don't reach 15pcs: They will either be canceled or if we're almost at 15, people from that plate's sub-group can buy up the rest and cost is split between the subgroup. I'll put an option in the order form that if it were be canceled, which plate you'd want the order to default to. If the 2nd preferred plate also gets canceled, you can either pick ANS125, ANS150, or cancel the whole thing. The only two design that well exceed the 15 MOQ are ANS125 and ANS150 based on the votes (https://docs.google.com/spreadsheet/viewanalytics?formkey=dE5ET3l3TW40ZXlsSlFpcVZKVFlucmc6MQ).
(example: You want a HHK150, the MOQ is not reached so your order will automatically default to WFD125. The WFD125 also doesn't reach 15 MOQ, so your order automatically defaults to ANS125).
ORDER FORM (https://docs.google.com/spreadsheet/viewform?formkey=dEg3d012cDVtaktsN2NvV1ZKa2FVS2c6MQ)
-
YOUR SUBMITTED ORDER (http://goo.gl/1TIlw)
This is what line-grained will look like. Pretty much the same as brushed aluminum.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/IMG_2379.jpg)
Other various finishes
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_IMG_2377.jpg) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=IMG_2377.jpg)
-
Form(s) filled. :)
Should be for:
HHK150 x 2
PRF125 x 1
ANS150 x 1
-
Sorry to be stupid. Perhaps I just forgot, but isn't the phantom board ANSI150 only? What would you use the other plates for?
-
What if we ordered through TheProfosist?
-
Phantom PCB can be configured in any of these layout designs.
-
For 2 plates we have to fill for 2 times the form?
-
What if we ordered through TheProfosist?
He preemptively put the plates in his order form before the company got back to me with all the options on material, price, and surface finish that was finalized. These should override but I'm ironing out the details with him right now.
-
$22 shipped?
-
For 2 plates we have to fill for 2 times the form?
Also wondering about this, since I'm ordering two different plates.
-
$22 shipped?
they are going to be shipped to me in bulk it seems
-
I'm asking if I order one, it will be to my door for $22? or will there be a shipping charge?
-
For 2 plates we have to fill for 2 times the form?
Also wondering about this, since I'm ordering two different plates.
2 plates, fill it out twice. 4 plates, fill it out 4 times, etc.. This accounts for every plate, and it's easier to manage if a certain design gets cancelled then I'll know which plate it defaults to for that specific one ordered.
EDIT: nevermind, the form was changed so fill it out ONCE only.
$22 shipped?
$22 is picked up straight from the company. I don't think anyone is going to get plates alone, they'll be combined with whatever you're order from Profosist's GB. Whatever he charges extra, you'll have to ask him. It might be a tad higher for shipping to him or handling fees, but I do think $3 higher per plate is a bit much.
-
For 2 plates we have to fill for 2 times the form?
Also wondering about this, since I'm ordering two different plates.
2 plates, fill it out twice. 4 plates, fill it out 4 times, etc.. This accounts for every plate, and it's easier to manage if a certain design gets cancelled then I'll know which plate it defaults to for that specific one ordered.
$22 shipped?
$22 is picked up straight from the company. I don't think anyone is going to get plates alone, they'll be combined with whatever you're order from Profosist's GB. Whatever he charges extra, you'll have to ask him. It might be a tad higher for shipping to him or handling fees, but I do think $3 higher per plate is a bit much.
yes it was a bit much i agree and it could always be changed
-
as a note im shutting off the form and clearing it and completely redoing it. I will post when it back up and you wiill have to resubmit your order. sorry about the inconvenience.
-
Ok since Profosist is managing most of the stuff, he wants the form to be done his way lol. I gave him access to everything so they're temporarily down until he's done.
-
Ok since Profosist is managing most of the stuff, he wants the form to be done his way lol. I gave him access to everything so they're temporarily down until he's done.
yes i am changing the form so yo ucan order any amount of plates and to that it is easier to manage from our end using number and what not
-
The new form is up http://tinyurl.com/ads3tkc . Sorry about changing the form after WFD already made it and put iit up but I think that this wil be much easier to use and manage, hopefully you understand.
-
So if i entered in a plate order in Prof's group buy, that is now null and void and i need to fill out this one instead? or do i not need to fill this one out?
-
Inflation is king! From $22 to $23 in less than 1 hour. :D
-
Prof, your form has ANS125 and ANS150 twice. I think those second set are supposed to be ISO.
-
So if i entered in a plate order in Prof's group buy, that is now null and void and i need to fill out this one instead? or do i not need to fill this one out?
yes please enter here i will be pming and email everyone that ordered plates from me directly tonight about this
-
Prof, your form has ANS125 and ANS150 twice. I think those second set are supposed to be ISO.
fixed, thanks for catching that jdcarpe
-
Inflation is king! From $22 to $23 in less than 1 hour. :D
sorry but new plan is to have plates shipped from manufacturer directly to me which hopefully the 1$ per plate should cover
-
Flat rate shouldn't be a lot for 150 aluminum plates
-
Flat rate shouldn't be a lot for 150 aluminum plates
manufacturer ships UPS, sorry I just though id save WFD the trouble of driving to get them.
o and at least in my parts and assembly GB i dont think we were any where near that 150 mark :(
-
Filled
-
Flat rate shouldn't be a lot for 150 aluminum plates
manufacturer ships UPS, sorry I just though id save WFD the trouble of driving to get them.
o and at least in my parts and assembly GB i dont think we were any where near that 150 mark :(
I'm so confused on to who is running plates. I'll just do it myself I guess
-
Filled
order received
-
Flat rate shouldn't be a lot for 150 aluminum plates
manufacturer ships UPS, sorry I just though id save WFD the trouble of driving to get them.
o and at least in my parts and assembly GB i dont think we were any where near that 150 mark :(
I'm so confused on to who is running plates. I'll just do it myself I guess
Yeah, this is all getting really confusing REALLY fast. I just want the parts.
-
Flat rate shouldn't be a lot for 150 aluminum plates
manufacturer ships UPS, sorry I just though id save WFD the trouble of driving to get them.
o and at least in my parts and assembly GB i dont think we were any where near that 150 mark :(
I'm so confused on to who is running plates. I'll just do it myself I guess
WFD i think? maybe you iif they dont meet 15? idk im not in charge nor informed about that part sorry.
-
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
-
If shipping wasn't such a pain in the ****, I'd run it. But I'm sure people want plates now not when I have time to run a GB. I also think I could do a better price that $22 or $23
-
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon
-
I added lines for you second and third choices if you r plate gets cancel by WFD's request
-
Damn i really like WFD design, id go with the HHK layout also, sorry prof
ordered
2 x ANSI125
2 x WFD125
-
lol its cool BTW i better be able to get one of my own plate i need 4 so that should give us a good start
-
Damn i really like WFD design, id go with the HHK layout also, sorry prof
ordered
2 x ANSI125
2 x WFD125
order received
-
so, WFD is building my phantom and i've no idea for the shipping address. should i just leave note in the comment section to send my plate to WFD?
-
so, WFD is building my phantom and i've no idea for the shipping address. should i just leave note in the comment section to send my plate to WFD?
yes but i still need your shipping address though in is specific spot
-
So let me get this straight:
If we ordered from Prof originally....all orders will say intact minus the plates. So if you ordered switches, plates, LEDs, & stabilizers from Prof you do not need to resubmit the entire order...you only need to resubmit the order for plates?
-
So let me get this straight:
If we ordered from Prof originally....all orders will say intact minus the plates. So if you ordered switches, plates, LEDs, & stabilizers from Prof you do not need to resubmit the entire order...you only need to resubmit the order for plates?
yes thats correct sorry about all of this im am updating my GB with this info as well
-
so, WFD is building my phantom and i've no idea for the shipping address. should i just leave note in the comment section to send my plate to WFD?
yes but i still need your shipping address though in is specific spot
alright. that clears me now.
will fill out the form when iget home
-
So let me get this straight:
If we ordered from Prof originally....all orders will say intact minus the plates. So if you ordered switches, plates, LEDs, & stabilizers from Prof you do not need to resubmit the entire order...you only need to resubmit the order for plates?
yes thats correct sorry about all of this im am not updating my GB with this info as well
You are not?
-
So let me get this straight:
If we ordered from Prof originally....all orders will say intact minus the plates. So if you ordered switches, plates, LEDs, & stabilizers from Prof you do not need to resubmit the entire order...you only need to resubmit the order for plates?
yes thats correct sorry about all of this im am not updating my GB with this info as well
You are not?
oops idk how that got there my bad
-
form just got updated with a field for shipping destination if you filled out the form before i added this please let me know what you want. I will try to pm/email these people also.
-
This is a rough GB
-
Not complaining, jus commenting! Thanks for all your hard work, guys :)
-
I apologize for all the confusion and shouldn't have passed on all this for someone else to handle. I'll now be handling everything, including the logistics as well. I'll take the orders, pick up the plates myself, package and ship out everything. I'll find time for all this. Directly from me is still $22 per plate. If all you need is the plate, then I will be the one shipping it to you.
Profosist however, is still having his own GB running for all other parts, so if you ordered stuff from him, I'm shipping some plates to him to go along with his stuff. I think there were about 40 people that filled out his form (http://geekhack.org/index.php?topic=38471.0). I'm also making the custom spacebar wires in both 6.25x and 7x, so you can get it directly from me or along with his stuff.
Again, sorry for the mess in these first two pages.
-
Cool beans...submitted my plate order.
-
I see prices are now $23, does that now include shipping?
-
I see prices are now $23, does that now include shipping?
oops ill change that that was before the lates update my bad and thanks for catching that.
Edit: form updated/fixed
-
No 7bit plate option?
-
No 7bit plate option?
I asked the same previously; its disappearance is due to its lack of practicality, and requiring a new special keycap groupbuy (see the caveat of the current custom plates).
-
idk if you think you can find buys for 15 7bit plates send WFD a PM
-
I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time
-
I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time
thats a great idea!
-
Mh, plates.
-
placed my order here, if I get it right previous plate orders to Prof were waved
-
WFD, you're making custom Costar 7x bars?
-
ordered 1x ANS150 ! :D
-
How much is shipping to the UK on these?
-
I could do small quantities, but it will be more than $22 (I'm guessing ~$27) and take more time
That would be awesome!
Still tried ordering 1x RBD150
-
ordered both iso plates, a profist plate with iso enter would have been nice.
-
WFD, you're making custom Costar 7x bars?
I need some of those also, are you adding them on the form?
-
Order placed!
-
Ordered the WFD 125. Nice Layout!
- Ron | samwisekoi
(http://www.samwisekoi.com/pixelart/Leo.png)
-
Ordered 2 ISO plates + 1 ANSI 125
-
Ordered.
-
WFD, you're making custom Costar 7x bars?
I need some of those also, are you adding them on the form?
WFD is going to get back to me on if he acn bend them and if he can how easy and or time consuming it is to do. Once he lets me know for sure ill add it to my form.
-
Might you PM me if they are added, Prof?
-
Might you PM me if they are added, Prof?
i can try to remember but as always there will be an update in my so if you havnt already notifiess/subscribed i suggest it :D
-
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon
Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.
-
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon
Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.
no this was not planned. I am sorry that this mess happened and will be getting pm/email updates out today. You can do whatever you wish to do. I only allowed/added just parts to be ordered from my GB because thats what people were asking for. This was because they didnt want to go out and find all the parts separately themselves and would rather have someone else do the work and have it shipped direct to them with exactly what they were looking for.
-
I'm also confused about ordering plates. If we order from WFD here, will the plates be shipped to TheProfosist, and then shipped from him to us? And are the ANSI 125/150 plates going to be the same price regardless of who we buy them from?
dont buy any from me those will be canceled i will be sending something about that soon
Were you still planning on doing this? If WFD is willing to deal with shipping plates out to those who are not getting assembly done by someone else I'd rather just get my plate and wires directly from him and source the stabilizers from somewhere. I really see no reason to have a plate and wires sent to you just because I'm getting a set of stabilizers from you. Especially if the stabilizers can be purchased directly from somewhere.
no this was not planned. I am sorry that this mess happened and will be getting pm/email updates out today. You can do whatever you wish to do. I only allowed/added just parts to be ordered from my GB because thats what people were asking for. This was because they didnt want to go out and find all the parts separately themselves and would rather have someone else do the work and have it shipped direct to them with exactly what they were looking for.
I can understand that some people just want their keyboard built for them or just a package of parts so that they can build it themselves. Where my concern is coming from is when I inquired about getting the parts myself you said I should just order them from your group buy. I think all this information about the parts needed and where to get them from should be consolidated somewhere and placed out in the open so people can make their own decision about whether to get them from you or individually on their own. If everyone orders everything from you and you get overwhelmed with it people may have to wait for items they could have purchased on their own and received sooner.
-
@Prof & WFD
are you still going to send yr both stuff together or will it be shipped separated (parts/plates)?
-
Submitted form yesterday but with ANS150 instead of ANS125.
Could you change for me? I had a change of heart. Sorry to be a pain :-[
-
2nd post is now updated with your orders to view. ISO plates need to ramp it up. Post in here or PM me if you need changes.
-
Are you still planning to offer spacebar stabilizer wires directly, both 6.25x and 7x, as well?
-
As for stabilizers, cherry plate mounted are available on mouser, part number is 0G990224 (http://www.mouser.com/Search/ProductDetail.aspx?R=0G990224virtualkey54010000virtualkey540-G99-0224). Costars are available on WASDkeyboard HERE (http://www.wasdkeyboards.com/index.php/products/keyboard-parts-1.html), bottom half.
I have enough cherry stabilizers for 20 sets that can shipped with the plates. If I run out, you can get your own from the links or from Profosist. If you're getting your own, a complete TKL needs 10 stabilizers, I think shipping from mouser is $7 and WASDkeyboard is $2.50. Currently you can't buy cherry 6.25x or 7x, and 7x costar wires anywhere so I'll make these when the time comes closer.
-
ordered 1 ANS125
THanks
-
If you're getting your own, a complete TKL needs 10 stabilizers,
That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.
I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar
-
placed order
-
Ordered.
-
ordered 1 ANS125
THanks
placed order
Ordered.
All Confirmed!!!
-
If you're getting your own, a complete TKL needs 10 stabilizers,
That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.
I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar
Ah yes they come in pairs, unlike costar stab parts that are all individually bought.
I just found it. lol are you interested in making all 171 wires too? Whatever you don't make, I'll end up making the rest.
http://geekhack.org/index.php?topic=39441.0 (http://geekhack.org/index.php?topic=39441.0)
EDIT: nevermind, I just read that thread and you only had 25 and no plans for more.
-
If you're getting your own, a complete TKL needs 10 stabilizers,
That number is only correct if you are buying from WASD. You need 5 count Cherry parts. 4 2x and 1 space bar.
I also have 25 sets in the classifieds of Cherry plate mount 6.25x space bar
Ah yes they come in pairs, unlike costar stab parts that are all individually bought.
I just found it. lol are you interested in making all 171 wires too? Whatever you don't make, I'll end up making the rest.
http://geekhack.org/index.php?topic=39441.0
he didnt make them, he got them from someone.
-
@Prof & WFD
can you both guys ship the parts together?
-
@Prof & WFD
can you both guys ship the parts together?
The plates marked to ship to me wil ship with anything else you order from me.
-
What sort of price are you thinking for 7x Costar bars, WFD?
-
What sort of price are you thinking for 7x Costar bars, WFD?
he told me a couple bucks to figure for my gb for the others.
-
So if I ordered the other WFD plates from the other group buy that will work for for a 1.25 modifier layout right? I think I only need one ANS150 plate and a 7x Cherry bar from this group buy then. Got two Phantoms coming.
-
The biggest issue with stocking Cherry plate mount stabilizers is the demand level. It's zero until a project like this comes along and then you have no idea how many will go with Cherry. I'm not so keen on that level of risk, don't want a chunk of space or money missing for ages.
-
Ordered. Thanks for the group buy.
-
So if I ordered the other WFD plates from the other group buy that will work for for a 1.25 modifier layout right? I think I only need one ANS150 plate and a 7x Cherry bar from this group buy then. Got two Phantoms coming.
All orders for plates from my GB are invalid
-
The biggest issue with stocking Cherry plate mount stabilizers is the demand level. It's zero until a project like this comes along and then you have no idea how many will go with Cherry. I'm not so keen on that level of risk, don't want a chunk of space or money missing for ages.
yep i understand completely
-
So who do I PM for an order change? WFD or Prof?
-
So who do I PM for an order change? WFD or Prof?
i can do it i believe im quoted in the OP
-
Hi, just wonder if ANSI125 can have 84 winkeyless layout ?
Nope, only the ANS150, ISO150, HHK150, and RBD150 can support winkeyless. Basically anything with 1.5x mod size.
-
When all the "case-builders" are requiring there own plates, does it make sense than to order a plate here? Just cannot see anybody doing a case for this plate. Or do I overlook something? :confused:
-
When all the "case-builders" are requiring there own plates, does it make sense than to order a plate here? Just cannot see anybody doing a case for this plate. Or do I overlook something? :confused:
Well there are a few cases already on the market that these plates will fit into such as a Filco TKL.
-
Every single plate was designed with a case in mind. There is no way to divorce plate design from case design.
-
okay, i see. i overlooked something. :)
-
When all the "case-builders" are requiring there own plates, does it make sense than to order a plate here? Just cannot see anybody doing a case for this plate. Or do I overlook something? ???
These plates are designed to fit Filco, PLU, and CM quickfire cases that already exist. Full metal cases require their own plate tailored to fit the case. You can take a gamble on whether a future aluminum case will go into production, and speculate on the price, but just know that those case/plate combo alone will be ~$200 or more. If you don't think you can afford that (assuming they will be made), then grab this plate and a cheap CM quickfire or PLU.
-
When all the "case-builders" are requiring there own plates, does it make sense than to order a plate here? Just cannot see anybody doing a case for this plate. Or do I overlook something? :confused:
Just buy a plate from this GB. The price is way more than reasonable (honestly, it's probably the cheapest group buy I've ever partook in). If the GH full metal case + plate comes to fruition you could always rebuild your phantom.
-
Are these plate the same dimensions as the ones from the first GB?
-
We need more ISO love :P
-
my layout needs more love
-
Other various finishes
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_IMG_2377.jpg) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=IMG_2377.jpg)
Can you give names to these? I'd like to request a particular finish.
-
my layout needs more love
I'd love to except keycaps would only be possible from WASD and those feel funny to me.
-
my layout needs more love
I'd love to except keycaps would only be possible from WASD and those feel funny to me.
tsangan+ISO+numpad ahould do the job for the most parts i think
-
my layout needs more love
I'd love to; but a second phantom is beyond my means at the moment... and the PCB buy is closed.
-
The order form doesn't work for me, can someone help me ordering a iso150 plate?
-
The order form doesn't work for me, can someone help me ordering a iso150 plate?
what are you having issues with? the reason I ask is no on else is having any trouble.
-
You have to fill out all the fields. Every. Single. One. Tedious but necessary, apparently.
-
You have to fill out all the fields. Every. Single. One. Tedious but necessary, apparently.
not notes :D
-
BTW guys, this deal was just posted on this forum. You can currently get the quickfire for $55 to use the case for these phantoms. It's currently the cheapest compatible case. Bonus is you also get switches, keycaps, cable, and accessories. Even if you don't use it for phantom, this the cheapest I've seen.
CM Quickfire Rapid TKL (http://goo.gl/oy3hr)
-
Yeah I saw that, I was hoping to just buy it and have it shipped straight to TheProfosist. Anyways form submitted ;D
-
Yeah I saw that, I was hoping to just buy it and have it shipped straight to TheProfosist. Anyways form submitted ;D
ship it stright to me if you want other have already done it.
-
BTW guys, this deal was just posted on this forum. You can currently get the quickfire for $55 to use the case for these phantoms. It's currently the cheapest compatible case. Bonus is you also get switches, keycaps, cable, and accessories. Even if you don't use it for phantom, this the cheapest I've seen.
CM Quickfire Rapid TKL (http://goo.gl/oy3hr)
i may sound stupid asking this but are you 150% sure this QR case will fit the phantom and this plate. if that is the case ill understandably cancel my PLU orders from Prof and grab 2 of these. $80(x2) vs 55(x2) shipped is too big of a difference to ignore, plus its less stuff prof has to send me :)
bah going to bed now, no time to order, hopefully this deal is still there when i log back in
edit: went ahead and got the quickfires
-
The order form doesn't work for me, can someone help me ordering a iso150 plate?
what are you having issues with? the reason I ask is no on else is having any trouble.
It was because I was on the phone, didnt work out as I wanted to. But now it does, form filled.
-
The order form doesn't work for me, can someone help me ordering a iso150 plate?
what are you having issues with? the reason I ask is no on else is having any trouble.
It was because I was on the phone, didnt work out as I wanted to. But now it does, form filled.
no problem gald you got your order in
-
BTW guys, this deal was just posted on this forum. You can currently get the quickfire for $55 to use the case for these phantoms. It's currently the cheapest compatible case. Bonus is you also get switches, keycaps, cable, and accessories. Even if you don't use it for phantom, this the cheapest I've seen.
CM Quickfire Rapid TKL (http://goo.gl/oy3hr)
Always the blues... wish I got that $25 deal a few weeks back :'(
-
I just hope they come unbranded
-
Sorry for this,
I filled out this form early and i don't think that this option was there but please have my plates go to Prof so that he can ship it with my other parts.
Also for my 2 WFD Plates in my order, i forgot what i selected at the bottom, so
1st choice: WFD125
2nd Choice: HHK150
3rd Choice: Nothing, I already have 2 ANSI125 plates in my order i don't need 4.
-
Want to cancel my plate. Thanks
-
It occurred to me that of the custom plates, WFD's WFD125 would still work in most available cases. I really don't want to custom build a case, so that sold it for me.
-
Sorry for this,
I filled out this form early and i don't think that this option was there but please have my plates go to Prof so that he can ship it with my other parts.
Also for my 2 WFD Plates in my order, i forgot what i selected at the bottom, so
1st choice: WFD125
2nd Choice: HHK150
3rd Choice: Nothing, I already have 2 ANSI125 plates in my order i don't need 4.
updated
-
Want to cancel my plate. Thanks
updated
-
GB ENDS TODAY!!!
-
I really want a ISO125 plate but it looks like it won't make it to 15 ordered. If it's canceled will there be any way to get one? Thanks.
-
Hey guys, orders are closing tonight and we're moving into payment. Check your orders here to make sure it's correct:
http://goo.gl/1TIlw (http://goo.gl/1TIlw)
There are about 160 PCBs ordered, but only about 130 plates. Just to mention again that phantom PCB requires a plate for mounting of switches and case. If money is the issue, you can just grab the PCB and plate because these are a one time run, while all other parts (switches, teensy, case, etc) can be bought any time to finish the build later. The only other reason I can think of for not order a plate is if you've already have a plate from Dan, but there were only 20 of them.
-
Could the 30 plates be from TPs GB? Or if we chose one of those when it was an option so we have to get one here?
-
And I'm actually ordering MORE plates than I ordered PCBs. I think what may be holding some people back is boost's alu case design with integrated plate.
I'll just say this, there is no real reason NOT to buy one of these plates for every PCB you ordered, unless you only ordered extra PCB in case you screw one up. They are cheap as hell, especially for a stainless steel plate. And even if you want to wait a few months for boost's alu case, what are you losing by buying one of these? $22?
Phantom was designed to be highly customizable in regard to layout options. If you want to change layouts later, you could desolder the switches and do that, if you had another plate.
-
And I'm actually ordering MORE plates than I ordered PCBs. I think what may be holding some people back is boost's alu case design with integrated plate.
I'll just say this, there is no real reason NOT to buy one of these plates for every PCB you ordered, unless you only ordered extra PCB in case you screw one up. They are cheap as hell, especially for a stainless steel plate. And even if you want to wait a few months for boost's alu case, what are you losing by buying one of these? $22?
Phantom was designed to be highly customizable in regard to layout options. If you want to change layouts later, you could desolder the switches and do that, if you had another plate.
They are reasonable in cost, but I wouldn't say cheap
-
They are reasonable in cost, but I wouldn't say cheap
Poor choice of words, but would you say, "These are inexpensive as hell..."?
Not cheaply made, by any means. Really quality work. I prefer the stainless plate over an aluminum plate any day.
-
They are reasonable in cost, but I wouldn't say cheap
Poor choice of words, but would you say, "These are inexpensive as hell..."?
Not cheaply made, by any means. Really quality work. I prefer the stainless plate over an aluminum plate any day.
I was saying that these are a decent price, but they can be made/sold cheaper
-
All depends on the cutting shop, I suppose. They would be more expensive here locally.
-
They were the cheapest price I got from the 13 local places around me, and it took quite a bit of emails to haggle for options and prices. I even drove there to meet up with one of the guys.
I'll just say this, there is no real reason NOT to buy one of these plates for every PCB you ordered, unless you only ordered extra PCB in case you screw one up. They are cheap as hell, especially for a stainless steel plate. And even if you want to wait a few months for boost's alu case, what are you losing by buying one of these? $22?
Phantom was designed to be highly customizable in regard to layout options. If you want to change layouts later, you could desolder the switches and do that, if you had another plate.
Just to add on to this, I'll probably get the case/plate combo boost it designing if it makes it all the way through final production, and price is below $250. But if you're putting all your eggs in one basket on that aluminum case and it doesn't make it to GB stage or if cost is too high, you can't go back and get a cheap plate to go with a plastic case. Beast might do a small run, but I won't be.
-
wooo go WFD125, me wants it (sorry prof :()
-
I really want two plates for my Phantom, but I'm out of money this month...
Is anyone buying some extras?
-
Could someone tell me which of these plates are compatible with a A.87 Korean PCB?
Also, WFD, I PMd about me order!
-
Could someone tell me which of these plates are compatible with a A.87 Korean PCB?
Also, WFD, I PMd about me order!
none to my knowledge
-
Really? What plate does it use then?
-
Really? What plate does is use then?
the kind that a LZ 87 would have.
-
Hmmmm
-
Come on PRF125 only 5 more plates needed!
if we're almost at 15, people from that plate's sub-group can buy up the rest and cost is split between the subgroup.
I'm game - currently it works out at about $30 instead of $22 - and if we get the four from jdcarpe's HHK150 then we'll only be a plate shy...
-
Could someone tell me which of these plates are compatible with a A.87 Korean PCB?
Also, WFD, I PMd about me order!
I think the ANS125 plate should work with the PCB, but you won't be able to mount it onto the specific A.87 case. You might be able to mount the whole ANS125/A.87 combo into a Filco or CM quickfire with a little modding to the plastic case though. These plates are not really PCB specific as long as the layouts match, but they ARE specific to the case they're designed for.
I manually changed your order.
-
Alright sorry I just Pmd you again without looking at this!
Add the ansi125 to my order too please, gonna try it out and see what happens!
Thanks, and this should make my current order 1 ANSI150 and 1 ANSI125, correct?
-
WFD,
Can you please remove the ANSI125 Plate from my order? Thanks.
-
Man. I hope I didn't just miss this :P
If I can, could I order tonight (Central Time)? Or have you already closed?
-
If we end up being a few short for the WFD125 I could always add a few more to my order
-
Are we still four under the prof layout?
-
I just submited the order.
I could have sworn i submitted an order a long time ago.
Let me know that i have an order for a single ansi 125, nothing more, or less
Thanks :)
******** if its too late, thats ok aswell, i already have a plate for my phantom, but i have 2 pcbs so ill need another plate sometime in the future.
-
Order placed.
-
the invoice is sending out now?
-
hey guys,
what is the plan with the plates which didnt reach the moq of 15, ie PRF125 or ISO 125? Are you gonna make them anyway (for higher price?) or will they be left out completely?
-
Could you drop the ANSI125 from my order please, leaving one ANSI150!
Thanks
-
hey guys,
what is the plan with the plates which didnt reach the moq of 15, ie PRF125 or ISO 125? Are you gonna make them anyway (for higher price?) or will they be left out completely?
If more orders are needed I only got the ANSI150 but would get HHK150 if it would help. Not sure what I'd use the extra numrow key for, but I'd figure it out.
-
WFD, is this going forward even without 150 MOQ of plates?
I don't see HHK150 making it, as there are only 4 orders for it, currently. I won't be converting those to any 125 plates. I don't have any use for 1.25 mods on a Phantom, in all honesty. I was going to order a PRF125 plate just for fun, but I dunno if that's going to make 15 MOQ, either. I aleady have two ANS150 plates from DanGWanG/The_Beast, so I don't really need those, either. I was just ordering them to help the MOQ, and because WFD took the time and effort to fix minor issues with the spacing and cutouts for switch opening.
-
Have the invoices gone out yet? I haven't gotten one yet. =X
-
I might as well shove some money over later to anodize it, since i'm likely going to take the keycaps off often to show off the Cherry MX Greens...Might as well have a plate that looks really cool. I'm thinking the color of the black iPad Mini (don't like Apple, but that color looks cool).
-
These are stainless steel so you'd have to paint or powercoat them if you are planning to recolor them
-
These are stainless steel so you'd have to paint or powercoat them if you are planning to recolor them
I'd go paint. I can see powder coating getting too thick to insert a switch into and you having to sand a ton of switch holes to get it to work. But that depends on how tight of a tolerance the laser guy used on this.
-
So many laggers here. The GB closed at 120 plates, a few days after the deadline there are 155 plates.
Anyways, I have an important update: USPS (http://postcalc.usps.com/) shipping prices just had a HUGE price increase in the past week. Bavman and I been trying to work out the best solution for the past week, and to save everyone double shipping costs of separate plates and PCB, he will ship the plates along with the PCBs. The shipping costs that he already charged for the PCBs were based on the old rates, which now has increased by at least a couple dollars for US, and even higher for international. So instead of paying separate shipping costs for these plates, there will be an extra $2 per plate to combine the shipping with the PCB. This helps cover the increased shipping costs for the PCBs, the added shipping weight of these plates, and costs of shipping the plates to bavman or profosist.
If I'm personally handling PCB/plate to combine with other packages or phantom assembly, there won't be that additional $2. I'll finally start to invoice.
-
I'm just down for plates bud do I need to settle up for anything?
-
Should I have already paid an invoice? I don't think I got anything...
-
I'm just down for plates bud do I need to settle up for anything?
I actually sorted out a list of a small group of people that got plates only, including you. In this case, you'll just have to pay the full shipping cost since you didn't already have to pay the PCB shipping costs that most people paid for.
Should I have already paid an invoice? I don't think I got anything...
I'm just starting the invoice, so no one has gotten it yet. Don't worry, you'll get it soon.
-
No problemo
-
I'm taking over AriesX pcb order from the other gb and was looking to take over their plate order from this gb also. But the order was for an iso 125. Id like an ANSI 150. Is that still ok? Pmd you about it.
-
I actually sorted out a list of a small group of people that got plates only, including you. In this case, you'll just have to pay the full shipping cost since you didn't already have to pay the PCB shipping costs that most people paid for.
Cool, will ours be sent out at the same time as phantom boards or just whenever they are finished?
wish the gh60 plates we being done too :)
-
Is it safe to say that all essential communication for the completion of my order will come by email? I need to take a break from the forums and I believe this is the last time-sensitive piece that I need in order to complete my Phantoms.
-
paid! :cool:
-
Paid.
-
Does it matter that the invoice doesn't show which plate design I chose?
-
I think he just put "phantom plate" for every ones order since it's all the same price. You can check the 2nd post of this thread to make sure your down for the correct plates.
-
Paid!
-
I think he just put "phantom plate" for every ones order since it's all the same price. You can check the 2nd post of this thread to make sure your down for the correct plates.
Thanks bavman.
Invoice is paid.
-
paid my invoice!
-
Paid. Thanks Bavman
-
about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....
-
Hi, sorry to be a pain in the butt but I have to cancel my order :(
Please let me know I need to do anything from my end! Again, I'm sorry about the hassle WFD!
-
about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....
It means your are Phantom plate invoice number 52. Mine said something similar. Check the second post in this thread if you want to make sure your order is right
-
Hi, sorry to be a pain in the butt but I have to cancel my order :(
Please let me know I need to do anything from my end! Again, I'm sorry about the hassle WFD!
What are you getting? I may fill your spot.
-
Should I be worried if I haven't been invoiced yet?
-
I ordered a HHK150 layout that I no longer needed
-
Does it matter that the invoice doesn't show which plate design I chose?
It takes me too long to type out every plate for each different order. I've already spent hours on this, and not fully done with all domestic invoices. The international orders will get invoices later today or tomorrow. Check your order here instead, it's a more centralized place where I can update:
> YOUR PLATE ORDER < (http://goo.gl/1TIlw)
about to pay..
but i dont understand what does "PHANPlate-52" mean? I order ANSI125.....
It means you're the 52nd person to receive the invoice for a phantom plate. That doesn't specify which plate you ordered.
-
paid
-
Got my money sitting in my PayPal just waiting to pay :)
-
Paid!
-
Paid, I ordered the Prf plate. Is that what I will be getting?
-
Paid.
-
still waiting for my invoice. ^-^
Edit : just received the invoice :)
-
Just recieved the invoice and paid it then for you.
Great job on the these group buys, WFD :)
-
paid!
-
paid
-
Invoice paid
-
I just sent paypal invoices to almost everyone, and there were a few that I contacted in PM for large orders of more than 4 plates. If you haven't gotten an invoice yet or something looks incorrect, let me know. It took a long time and I did most of them in between RL tasks, so there might be some mistakes.
Lastly, I just want to thank anyone that paid so quickly or make it a hassle-free order. You guys make GB management so much easier.
-
What plates didn't make it to the group buy?
-
Ohhh phantom! :D
-
Paid
-
paid :)
-
Paid!
-
Paid thanks.
-
Just woke up and paid. I even paid before breakfast!
-
same here
-
paid as well
-
Paid Finally !
-
Anyone else not get an invoice? I haven't yet.
and WFD I may be interested in getting that HHK150 plate if it's having a problem reaching production for those that want it. Is that true?
-
Paid
-
Thank you WFD for the work on the invoicing. I am sure this isn't something that would be considered trivial. Not only are you taking on the work itself, but also the hassle of keeping things in order with all of the cancellations, emailing, and straightening out any issues that may arise. You da man!
Also, thanks for getting the plates made, and just watching out for our best interests in this whole thing. You still da man!
-
now that I'm organizing a group buy I understand how difficult and frustrating it can be. I will never ever argue about tiny weeny details on others' group buys.
this is just for saying: thanks.
-
now that I'm organizing a group buy I understand how difficult and frustrating it can be. I will never ever argue about tiny weeny details on others' group buys.
this is just for saying: thanks.
we're not that bad ;P
-
we're not that bad ;P
(http://4.bp.blogspot.com/_TWiBOStc11Y/SP_ZSJ4SsrI/AAAAAAAAAGo/JOOTEI0t8mU/s400/angry_squirrel.jpg)
-
^ make that a cap! :)
-
I still haven't recieved any invoice for my plate.
-
Thanks for running this WFD! It seemed very complicated, but you made it simple. I am very grateful for you making this work out!
-
Any estimates when there will be news for the low-quantity designs?
-
Sorry guys, I've been AFK for a few days. Just logged in and I have over 30 new PMs, so just be a little patient of you don't get an answer right away.
There seems to be a mini-GB for a couple larger Germany orders, so I'll coordinate with all these people as well as bavman's PCB and profosist's parts to get you guys the lowest shipping.
I'm updating all the payment status as well, which is linked in the 2nd post (same as the public order spreadsheet).
-
Paid.
-
Paid.
I have to change my address though WFD. It for some reason is shipping to my Cali address.
Check your PM please. Ty!
-
When do you need money paid by?
-
I would like to know too. I need to wait for my next check later this week :-(
-
I too need a few things to clear before I can pay...
-
Pay it ASAP if you can. Payment was already due on Friday as the invoice states. Basically the longer it takes to pay, the longer the lag to submit order. This plate GB is the limiting factor for the phantom GB right now, time-wise.
-
WFD, how many are required for a plate design to be made? I see the one I want only has 4 orders for. Also, I never got a reply about the spacebar wire. Thanks!
-
Pay it ASAP if you can. Payment was already due on Friday as the invoice states. Basically the longer it takes to pay, the longer the lag to submit order. This plate GB is the limiting factor for the phantom GB right now, time-wise.
What's the lead time on the plates?
-
WFD, how many are required for a plate design to be made? I see the one I want only has 4 orders for. Also, I never got a reply about the spacebar wire. Thanks!
Still trying to see if they're going to make it without additional charges. They might add on extra programming fees in the low quantity ones.
What did you ask about the spacebar wire? My inbox is a mess right now, so I might have missed the PM.
Pay it ASAP if you can. Payment was already due on Friday as the invoice states. Basically the longer it takes to pay, the longer the lag to submit order. This plate GB is the limiting factor for the phantom GB right now, time-wise.
What's the lead time on the plates?
First time I got quotes in January was a 3-4 weeks leadtime, depending on their workload. They had to requote, so hopefully their leadtime doesn't change.
-
If anyone wants to sell their plate, let me know.
-
If anyone wants to sell their plate, let me know.
Which type were you looking for? ANS150?
-
Hey WFD, I PMed about my payment, I know your busy so I understand, just wondering if you got my payment. My Paypal is such a mess, and I don't have anymore to pay so I think I did. Just want to make sure!
-
I actually have a SS ANSI150 from the earlier buy sitting at TheProf's that I might not use
-
I actually have a SS ANSI150 from the earlier buy sitting at TheProf's that I might not use
I have an extra, also. And akuJIWA is sending me a free QFR soon, so it would be the least I could do...
-
Hey WFD, I PMed about my payment, I know your busy so I understand, just wondering if you got my payment. My Paypal is such a mess, and I don't have anymore to pay so I think I did. Just want to make sure!
I didn't get your PM about payment. Last PM I got from you was regarding shipping your poker plate (which hasn't shipped out yet, still need to package it and drop it off). Anyways you haven't paid yet. Your paypal invoice number is PHANPlate-25
-
If anyone wants to sell their plate, let me know.
Which type were you looking for? ANS150?
I'm going for the ANS150, but don't worry, WFD just hooked me up with one! =] Good bro!
-
Hey WFD, I PMed about my payment, I know your busy so I understand, just wondering if you got my payment. My Paypal is such a mess, and I don't have anymore to pay so I think I did. Just want to make sure!
I didn't get your PM about payment. Last PM I got from you was regarding shipping your poker plate (which hasn't shipped out yet, still need to package it and drop it off). Anyways you haven't paid yet. Your paypal invoice number is PHANPlate-25
Alright thanks, will pay tonight after work!
Would really appreciate if you could get the poker plate it in the mail :p I've been waiting for several weeks to start my poker mod project :)
-
Paid
-
There seems to be a mini-GB for a couple larger Germany orders, so I'll coordinate with all these people as well as bavman's PCB and profosist's parts to get you guys the lowest shipping.
Thanks! Your efforts are much appreciated! =)
-
I apologize for the delay. Now paid.
-
Paid (Finally!)
-
Paid on Tuesday and am still not updated yet in the list.
-
Ok updated. These people still have not paid, so I'm going to start sending nagging PMs.
https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdFExRUdJTXR5REhtYlBYd1dmREhlc0E#gid=0 (https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdFExRUdJTXR5REhtYlBYd1dmREhlc0E#gid=0)
esoomenona
daerid
Grimey
BimboBB
TheProfosiist
zzaaron
fl0w3n
ekw808
obtxo
tipo33
-
Ok updated. These people still have not paid, so I'm going to start sending nagging PMs.
https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdFExRUdJTXR5REhtYlBYd1dmREhlc0E#gid=0 (https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdFExRUdJTXR5REhtYlBYd1dmREhlc0E#gid=0)
esoomenona
daerid
Grimey
BimboBB
TheProfosiist
zzaaron
fl0w3n
ekw808
obtxo
tipo33
Da Da duhhhhhh, I think TheProfosist is MIA!
-
Still no news about the low quantity designs?
-
Da Da duhhhhhh, I think TheProfosist is MIA!
Probably OD'd on some cheese or something, those silly Wisconsians.
-
There's a big problem right now that I will try to resolve withing the next few days :( . I'll give a more detailed update when I get more info.
-
I apologize for not paying until now. I just made my payment.
The reason I hadn't paid is because I was curious whether or not the plate I ordered would even go through, being that the amount ordered was very low. And, unlike others, I chose not to supply a second option as a backup choice, because the only other I may be interested in I already have two of. I asked this more than once, but have yet to receive a response. I suppose if anything, I will just be refunded. Sorry for holding things up if some of the plates with smaller orders actually will be placed.
Also, WFD, that PM was regarding some 7x spacebar wires (Cherry, as well as Costar if you're making them). I wanted to order a couple, and was curious whether they would be added to my order. Being that that order was paid, perhaps we can work out a new invoice on those?
-
I'm still down to pickup a spare 1.25 ANSI plate if you need me to.
-
Sorry for being slow on the payment as well. Used to sitting around and waiting for invoices rather than being proactive.
-
End of the month is a bit tight for me right now. I should be able to pay here by the end of the week :( Sorry!
-
Just sent my payment. Had to sell a bunch of old computer gear to fund it.
Greatly apologize for the hold up to everyone.
-
There's a big problem right now that I will try to resolve withing the next few days :( . I'll give a more detailed update when I get more info.
any info yet? bav's last update made it sound like the pcbs are moving to completion over there so eyes are now on these plates and prof's parts.
-
Any news?
-
PM me if any ANS150 plates become available ;)
-
any news on this ?
-
any news on these?
reason i'm asking is the last status you gave said "There's a big problem right now"
leaving us all in suspense.
-
any news on these?
reason i'm asking is the last status you gave said "There's a big problem right now"
leaving us all in suspense.
+1
-
+1
-
+1
Could do with knowing so I can get some caps sorted
-
+1
-
+3.142
Hi late pi day everyone!
-
+1 again :P
-
So many +1's. I didn't totally just brush this GB off to the side, just forgot to update. Order had already been submitted, and the few that still have not paid got cancelled. I can only nag so much...
With that said, these still have about a week left until they're ready, assuming there are no other problems.
-
thanks for the update!
can you clarify something though
are my plates going to bav or prof or direct to me? I totally forgot.
-
Sweeeeeet. The day I have all these parts for my Phantom will be a glorious one.
-
If you ordered a pcb from me then I'll get your plate and ship to you to save on shipping
-
Order has been submitted? I assume you can give an update on the low quantity designs also?
-
Very exciting! Thanks for the update, I can't wait for all these production runs to start coming together.
-
Order has been submitted? I assume you can give an update on the low quantity designs also?
I bent over backwards to get the 3 low quantity designs to go through at a reasonable cost. But they're all going through.
are my plates going to bav or prof or direct to me? I totally forgot.
Yours are going to profosist.
-
are my plates going to bav or prof or direct to me? I totally forgot.
Yours are going to profosist.
Should I change that?
-
are my plates going to bav or prof or direct to me? I totally forgot.
Yours are going to profosist.
Should I change that?
Likely...
-
I bent over backwards to get the 3 low quantity designs to go through at a reasonable cost. But they're all going through.
Wohooo, you are my hero!
-
Any leftover plates? =[
-
Willing to buy a ansi 150 if anyone is interested in giving theres up
-
Someone was selling their set in classifieds. Not sure if it sold.
-
Someone was selling their set in classifieds. Not sure if it sold.
Yeah its a full set with pcb and such too, i want just a plate :P
-
Could ask him to separate? Dont know his terms.:D
-
Turkishrambo, I may have an extra ANSI150 plate when I receive everything. Once these have shipped, send me a PM.
-
all eyes on this now lol
-
Are there any plates that could overlap as a HHKB layout?
-
Are there any plates that could overlap as a HHKB layout?
My HHK150 does.
-
^Yours and mine both. All 3(?) of us who ordered one...
-
I was going to go with jdcarpe but when I saw the orders were low I switched to WFD thinking it wouldn't be made :(
-
That's why a backup option was implemented! Tsk tsk. Although for me, the only thing I'd want in backup would be the ANSI150, and I already have one of those, so I was only in for one thing. I'm glad WFD managed to get it through.
-
Guys I have bad news. It's actually terrible news considering this point in time:
I got a call from the company to come check out the small batch they did to make sure they're ok before they finished up the rest. The quality of the plates they already did was total garbage and I didn't accept them. Talked to them for a while on the spot, and we basically concluded that they will be taking majority of the loss but I let them keep the programing and setup fees, which were out of my own pocket.
If you want to know why they turned out like crap, it's because the laser cutter is 2500w compared to a 4000w high end machine that I had the last plate GB done at. Lower power means it takes longer to cut each plate, which means it uses up more of their gas tanks. When they try to artificially boost the speed just by 20%, then it does not cut all the way through at some areas. Tolerance is just terrible in general, and there's too much warping/distortion.
I'm actually pretty pissed and stressed out about this. I'm kinda sick of dealing and negotiating with different companies, and driving to some of them. I think best solution is to just go back to the original company, get a requote at the current quantities, drop the two lowest designs since programming costs for them are too high, and just submit the order if it's a reasonable quote. I've been trying to avoid going higher than what I already invoiced for, but it looks like price will increase a few dollars per plate to make up for all the cancellations and non-payment. I'm just going to pay for it all upfront and whatever the price difference is per plate, you can pay me back if you feel like it. I just don't want to spend anymore time nagging for payment and making sure you paid a few bucks.
[attach=1] [attach=2] [attach=3]
-
Those cuts look terrible. You should have just given them a spare plat and told them to make it look like this. I looks like the machine was forced to rush through it. Its been a long time since I did any metal work, but I remember if you try to rush with a plasma cutter it usually screws up your cuts like in the pictures you posted
-
YIKES that's some bad news, I know this goes without saying but thanks for all the hard work in this.
-
They look really awful! How can he even ask you to come by and check the quality?! They belong in the dumpster! what a ****ty company!
-
You made the right call WFD. It sucks that you're having to bear the brunt of all this stress, but I'm sure I'm not alone when I say that we're grateful for what you do. So thank you.
As for the additional cost, that's a no brainer and I'll pay whatever is required. It's the least we can do.
-
Just tell me how much is needed and thank you again
-
I am sorry to hear about all the bad stuff, WFD.
I am just thankful for all the extra stress that you have to bear.
for additional cost, i'll pay for it.
-
Sorry to hear that. I will make sure to cover the difference for my plate via paypal gift.
-
So which are being dropped? If its the HHK150, that makes me sad, but if so, go ahead and keep the money to cover any losses you've incurred.
-
It must have been super frustrating seeing those samples, but thank you for your persistence! This is just a hobby, we can all wait a little while for fun stuff.
-
I've been trying to avoid going higher than what I already invoiced for, but it looks like price will increase a few dollars per plate to make up for all the cancellations and non-payment. I'm just going to pay for it all upfront and whatever the price difference is per plate, you can pay me back if you feel like it.
Really thankful for all your hard work WFD. No problem paying a few bucks extra to do it right here.
[)amien
-
I'm sorry this had to happen guys. All those late payments and last minute cancellations a few months ago really didn't help. Earlier today I've already submitted a request to the old company for a requote, they've accepted it, and will get back to me sometimes next week, which I'll resubmit the order. I'll make this work out one way or another.
-
sorry if this has already been posted but couldn't find it in the OP, do you have the original DWG you can share?
I've found a laser cut service near here and I think I'm going to have some additional plates cut while I wait for yours.
Anyway thanks for your hard work on this GB, let me know if you need help covering the unexpected expenses.
-
Guys I have bad news. It's actually terrible news considering this point in time:
I got a call from the company to come check out the small batch they did to make sure they're ok before they finished up the rest. The quality of the plates they already did was total garbage and I didn't accept them. Talked to them for a while on the spot, and we basically concluded that they will be taking majority of the loss but I let them keep the programing and setup fees, which were out of my own pocket.
If you want to know why they turned out like crap, it's because the laser cutter is 2500w compared to a 4000w high end machine that I had the last plate GB done at. Lower power means it takes longer to cut each plate, which means it uses up more of their gas tanks. When they try to artificially boost the speed just by 20%, then it does not cut all the way through at some areas. Tolerance is just terrible in general, and there's too much warping/distortion.
I'm actually pretty pissed and stressed out about this. I'm kinda sick of dealing and negotiating with different companies, and driving to some of them. I think best solution is to just go back to the original company, get a requote at the current quantities, drop the two lowest designs since programming costs for them are too high, and just submit the order if it's a reasonable quote. I've been trying to avoid going higher than what I already invoiced for, but it looks like price will increase a few dollars per plate to make up for all the cancellations and non-payment. I'm just going to pay for it all upfront and whatever the price difference is per plate, you can pay me back if you feel like it. I just don't want to spend anymore time nagging for payment and making sure you paid a few bucks.
(Attachment Link) (Attachment Link) (Attachment Link)
YGPM.
Willing to throw in some extra $ too to help out the GB.
-
If there's another spot in the GB after changing, I don't mind getting 1-2 ANS125 or 150.
-
At this point, I can't cancel, add more plates, or make anymore changes. I've already submitted a requote for exact numbers of plates. If there are any changes now, then it would have to be cancelled and the whole process starts over. There will be some people that change their minds once they receive stuff, so you can sort that out afterwards.
sorry if this has already been posted but couldn't find it in the OP, do you have the original DWG you can share?
I've found a laser cut service near here and I think I'm going to have some additional plates cut while I wait for yours.
I'll send you a PM for this.
-
IF WFD or whoever is doing the plate shipping is OK with swapping addresses:
I do not need the ANSI 1.50 plate I ordered—not because of the QC problem above: I now have a 7bit plate. If someone stateside wants to take the plate off my hands at cost, let me know.
-
*message eeeeeeeeerased!*
-
Thanks for the updates and your efforts, WFD.
So with this setback, any idea when will the new order of plates will get to you?
-
A large order for most of the plates were already submitted and paid at the beginning of the week, with ETA in 3 weeks. I'm still waiting for updates on the designs with lower quantity to see if it can go through. Hopefully these lower design quantities will work out.
-
If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it. :-X
-
If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it. :-X
PM paranoid. His post is three posts above this.
-
If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it. :-X
PM paranoid. His post is three posts above this.
Sure I'll try, but then the person that gets the rest of the stuff will be without a plate, hehe.
-
I don't remember if I ordered a plate or not! :-/ I hope so.
-
any updates about the plates? :(
-
Most of them are done and can be picked up late next week. No ETA on the low quantity designs, but they're in progress.
-
Late next week like around the 25th-26th? Also any chance there will be an extra ansi 150 plate?
-
Yeah, I'm scheduled to pick them up at those times. Sorry, no extra plates at all :( , I already spent more than I invoiced for so I didn't want to spend more on extras not knowing if they would be needed.
-
You know who has an PHANSI150 plate, daniel. You know very well.
-
Hey WFD, just sent you a PM regards to the plate shipment.
-
WFD, I notice that you still have me marked as having not paid on the spreadsheet, however my PayPal says I paid your invoice for both plates.
Status: Paid with PayPal on February 28, 2013 at 9:17 AM PST
-
so if my math is correct, WFD your last ETA would mean they could be ready to ship out as soon as end of this week or beginning of next week. is that correct? (yeah i know you also have the closing of GH60 to deal with :eek:)
-
zzzz, any updates? :-[
-
Will be interested if anyone is selling an extra plate!
-
Will be interested if anyone is selling an extra plate!
+1 here too :P
-
I just drove 3 hours round trip to pick them up. Quality on these are really nice. Lines are very clean, good tolerances, surface finishes, overall exceeded my expectations. They even individually wrapped them. If I would have known they turned out this good, I would have bought a few extras, but I already spent more than what I invoiced for, so it was not possible to buy extras. Sorry guys, you'll have to source the owner of these plates.
This is only most of them, Beast is having the smaller quantity designs being cut right now, so I have no ETA on those. I'll be shipping these first though.
[attach=1] [attach=2] [attach=3]
-
:eek:
-
Thanks for seeing these through WFD they look awesome, I can't wait.
Are the ISO layouts part of this or are they the small quantity production?
[)amien
-
Beautiful. :'(
-
Those look great! If you post the approx cost difference per plate, that would help us toss you some more funds.
thanks
-
If anyone has one they're willing to give up/sell an ansi125, please PM me :( I'm wanting to buy/pay immediately :'( I can't believe I missed this *sigh*
-
thanks so much for your efforts! ;D
just wondering : you will send the plate to bavman?or directly ship to me?
-
They look gooooood!
thanks so much for your efforts! ;D
just wondering : you will send the plate to bavman?or directly ship to me?
Fairly sure he will be sending the plates to Bav. Bav will then combine both into the same shipment to save costs.
-
This is only most of them, Beast is having the smaller quantity designs being cut right now, so I have no ETA on those. I'll be shipping these first though.
I'll email my guy and see where he's at in terms of production.
-
would the WFD125 be considered one of the smaller quantity?
-
would the WFD125 be considered one of the smaller quantity?
yes
-
well then i put my trust in you sir, email away
-
anyone with a spare 1.5 iso plate or wanna trade for a ansi 1.5 plate?
-
If anyone is looking to selll a ANS125, PM me.
Thanks.
-
Plates? Awesome!
Where are we on PCBs?
- Ron | samwisekoi
(http://www.samwisekoi.com/pixelart/GH75.png)
-
Plates? Awesome!
Where are we on PCBs?
PCBs came in a while ago, we should be seeing both ship out this week I think.
-
Yeah sometimes this week for most of them. But I need to straighten out which plates go where, and it's a mess right now. People have been selling orders and it no longer goes to original owner. Then I have to figure out which ones stay with me, goes to bavman, ship directly to buyers, or whether to send any to profosist or not. I cannot contact that guy to confirm anything or get payment he's owed me for a while now.
-
I'll make it easy on ya... My original order goes directly to me so you can send it now ;D You're welcome. :))
-
I'll make it easy on ya... My original order goes directly to me so you can send it now ;D You're welcome. :))
Me too!
-
Plates would have been done yesterday, but they lost power for some reason. They should be done today and on their way to WFD soon
-
thanks for the update beast!
lets hope profosist get sorted his stuff soon as well and we might have an happy end. :)
-
Hey Beast, you got the PRF plates too?
-
HHK150 (4)
ISO125 (10)
ISO150 (15)
PRF125 (9)
RDB150 (2)
WFD125 (14)
This is the order WFD needed and I ordered
-
I'm lookling to trade my ANSI 125 for an ANSI 150 or just buy an ANSI 150 if someone has one available. Please pm me if you do.
-
Looking to buy 1 ANSI125 plate. Please PM me if you have one, thanks!
-
How are we looking with the re-ordered plates?
-
Plates should be dropped off tonight and shipped to WFD relatively soon (should be no later than Friday)
-
For those that got their PCB already but were supposed to have the plate/pcb shipped together, are we going to get them directly? Or are they going to goto Bav and then go out?
-
Plates should be dropped off tonight and shipped to WFD relatively soon (should be no later than Friday)
Thanks!
-
Still looking for a ansi125 plate, please let me know. : (
-
Still looking for a ansi125 plate, please let me know. : (
You really should be looking for a ANSI150 plate...What's the point of getting a Phantom if you're going to use a layout you can get on any commercially available keyboard??? :P
I kid, but seriously. You need an ANSI150 plate.
-
Still looking for a ansi125 plate, please let me know. : (
inteli has a point..
-
I may have an extra ANS150 plate or two once I receive my plates...
-
Sigh. I guess that will do. I really dislike 150 layout because of the need to hunt a tsangan kit.
-
yeah I might want to get rid of my 125+pcb too... once I get it. I'm totally in 60/65% right now.
-
yeah I might want to get rid of my 125+pcb too... once I get it. I'm totally in 60/65% right now.
Please let me know when you do. : (
-
I am also interested in a ANSI 125 plate, and if possible pcb too. Anyone who wants to sell theirs PM me Thanks.
-
Yeah sometimes this week for most of them. But I need to straighten out which plates go where, and it's a mess right now. People have been selling orders and it no longer goes to original owner. Then I have to figure out which ones stay with me, goes to bavman, ship directly to buyers, or whether to send any to profosist or not. I cannot contact that guy to confirm anything or get payment he's owed me for a while now.
Any updates? If we ordered a plate and pcb we're waiting for the plates to be shipped to bavman and then he'll ship them both to us?
-
I've had most of them for a while. Waiting for Beast to send me the rest so I can ship it directly, or to bavman. I already have a spreadsheet on exactly where each plate will be sent, or whether they will be combined with PCB or not.
-
I've had most of them for a while. Waiting for Beast to send me the rest so I can ship it directly, or to bavman. I already have a spreadsheet on exactly where each plate will be sent, or whether they will be combined with PCB or not.
They'll be shipped tomorrow pending that PM I sent you.
-
Why didn't Beast just ship to Bavman??
-
Looks like I missed out on this, oh well, need it TKL anyway... I'm in for round two if we can get a TKL version
-
Looks like I missed out on this, oh well, need it TKL anyway... I'm in for round two if we can get a TKL version
Huh? The Phantom is indeed a TenKeyLess design...
-
Looks like I missed out on this, oh well, need it TKL anyway... I'm in for round two if we can get a TKL version
Huh? The Phantom is indeed a TenKeyLess design...
He is probably confused because the plates look like they support a number pad, but that is just to support a Quickfire TK style of layout if im not mistaken.
-
I got the rest of the plates from Beast. The box felt like it weighed 200 pounds. This thing was dragged all the way from the main office, up my stairs. Lazy-ass deliverer didn't want to carry it up my stairs :/
Plates that Beast sent have slight curves, so you'll have to unbend them before installing the PCBs. There are about 50, so I don't have time to unbend them myself before shipping, but it should only take you 5 min. I'll get to shipping these out in the next week. There are about 140 total.
-
ahaha. good news. finally my phantom is going to be finished. :D
-
I got the rest of the plates from Beast. The box felt like it weighed 200 pounds. This thing was dragged all the way from the main office, up my stairs. Lazy-ass deliverer didn't want to carry it up my stairs :/
Plates that Beast sent have slight curves, so you'll have to unbend them before installing the PCBs. There are about 50, so I don't have time to unbend them myself before shipping, but it should only take you 5 min. I'll get to shipping these out in the next week. There are about 140 total.
So they are all bended? :-\
-
They just have a slight curvature to them from going through the time saver in only one direction. It's really no big deal to straighten them out before you install your switches.
-
I got the rest of the plates from Beast. The box felt like it weighed 200 pounds. This thing was dragged all the way from the main office, up my stairs. Lazy-ass deliverer didn't want to carry it up my stairs :/
Plates that Beast sent have slight curves, so you'll have to unbend them before installing the PCBs. There are about 50, so I don't have time to unbend them myself before shipping, but it should only take you 5 min. I'll get to shipping these out in the next week. There are about 140 total.
Knowing this anyone want to sell me their Ans125? ;D
-
Knowing this anyone want to sell me their Ans125? ;D
You guys know that the phantom parts are open source, right? You can just have one made up for you any time you want.
-
Knowing this anyone want to sell me their Ans125? ;D
You guys know that the phantom parts are open source, right? You can just have one made up for you any time you want.
By who?
-
Knowing this anyone want to sell me their Ans125? ;D
You guys know that the phantom parts are open source, right? You can just have one made up for you any time you want.
By who?
Find someone local to you with a laser cutter. The drawing files are out there.
-
Knowing this anyone want to sell me their Ans125? ;D
You guys know that the phantom parts are open source, right? You can just have one made up for you any time you want.
By who?
Find someone local to you with a laser cutter. The drawing files are out there.
do you by chance know where they located?
I've searched but couldn't find them, maybe I'm bad with the techno lingo, but not sure what it would be called.
-
do you by chance know where they located?
I've searched but couldn't find them, maybe I'm bad with the techno lingo, but not sure what it would be called.
http://deskthority.net/marketplace-f11/phantom-custom-keyboard-group-buy-closed-t1411-180.html
-
do you by chance know where they located?
I've searched but couldn't find them, maybe I'm bad with the techno lingo, but not sure what it would be called.
http://deskthority.net/marketplace-f11/phantom-custom-keyboard-group-buy-closed-t1411-180.html
cant seems to open the files after unzipping them :-\
-
do you by chance know where they located?
I've searched but couldn't find them, maybe I'm bad with the techno lingo, but not sure what it would be called.
http://deskthority.net/marketplace-f11/phantom-custom-keyboard-group-buy-closed-t1411-180.html (http://deskthority.net/marketplace-f11/phantom-custom-keyboard-group-buy-closed-t1411-180.html)
cant seems to open the files after unzipping them :-\
they open fine in autocad.....what are you trying to open them with?
-
I have a 1.25 plate + PCB + teensy. If this has not yet been shipped to me (which I suspect) you can have the whole order flipped to you.
I'm totally in for 60% right now, I don't need another TKL.
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD I'm unsure what to answer. Can someone help me out with this?
Sorry to hijack this thread. :-[
I have a 1.25 plate + PCB + teensy. If this has not yet been shipped to me (which I suspect) you can have the whole order flipped to you.
I'm totally in for 60% right now, I don't need another TKL.
Who is this directed to?
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD can someone help me out with this?
Sorry to hijack this thread. :-[
1/16in if you are in the usa. 1.5mm would be better though since it's closer to costar specs.
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD can someone help me out with this?
Sorry to hijack this thread. :-[
1/16in if you are in the usa. 1.5mm would be better though since it's closer to costar specs.
Thank you.
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD can someone help me out with this?
Sorry to hijack this thread. :-[
1/16in if you are in the usa. 1.5mm would be better though since it's closer to costar specs.
Thank you.
Sorry - I was a little vague. It is 0.06" on the costar spec sheet. However, it's hard to find sheets of this thickness. Try to get 1.5mm if you can, but I've heard it's hard to get this in the USA. 1/16" is easy to find and will also work okay, however you might need to sand it down to get costar stabilisers to fit.
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD can someone help me out with this?
Sorry to hijack this thread. :-[
1/16in if you are in the usa. 1.5mm would be better though since it's closer to costar specs.
Thank you.
Sorry - I was a little vague. It is 0.06" on the costar spec sheet. However, it's hard to find sheets of this thickness. Try to get 1.5mm if you can, but I've heard it's hard to get this in the USA. 1/16" is easy to find and will also work okay, however you might need to sand it down to get costar stabilisers to fit.
but if i have Cherry Stabs would that matter?
-
I've contacted a laser shop and they are asking for the thickness... as i don't have CAD can someone help me out with this?
Sorry to hijack this thread. :-[
1/16in if you are in the usa. 1.5mm would be better though since it's closer to costar specs.
Thank you.
Sorry - I was a little vague. It is 0.06" on the costar spec sheet. However, it's hard to find sheets of this thickness. Try to get 1.5mm if you can, but I've heard it's hard to get this in the USA. 1/16" is easy to find and will also work okay, however you might need to sand it down to get costar stabilisers to fit.
but if i have Cherry Stabs would that matter?
Oh, in that case I don't think it matters too much. Any of the three thicknesses will work. Just get whatever is cheapest/most readily available.
-
Most places carry 1.5mm / 0.06". It doesn't matter so much. For example, the KMAC comes with a pretty thin plate... more like 1.0mm.
By the way, you can definitely get your parts made just for you (I do it regularly these days) however you will find that it is way more expensive than the group buy prices. Economy of scale. I probably should have mentioned that in my previous comment.
-
Most places carry 1.5mm / 0.06". It doesn't matter so much. For example, the KMAC comes with a pretty thin plate... more like 1.0mm.
By the way, you can definitely get your parts made just for you (I do it regularly these days) however you will find that it is way more expensive than the group buy prices. Economy of scale. I probably should have mentioned that in my previous comment.
Yea, I assumed that from the beginning, I'm trying to buy a plate so i can finally start building this thing...
also, Matt3o, I don't want to step on anyone's toes but if you're willing to sell your "spot" for the plate send me a PM and we'll work it out.
-
Most places carry 1.5mm / 0.06". It doesn't matter so much. For example, the KMAC comes with a pretty thin plate... more like 1.0mm.
By the way, you can definitely get your parts made just for you (I do it regularly these days) however you will find that it is way more expensive than the group buy prices. Economy of scale. I probably should have mentioned that in my previous comment.
Yea, I assumed that from the beginning, I'm trying to buy a plate so i can finally start building this thing...
also, Matt3o, I don't want to step on anyone's toes but if you're willing to sell your "spot" for the plate send me a PM and we'll work it out.
Let me buy the whole thing. : (
-
I'm selling all or nothing :)
I still have to understand if my order has been shipped... and who is actually responsible for shipping it :) I made my order months ago and I'm a bit lost at this point
-
So apparently there were a few order transfers without letting me know. I'm not a mind reader you know. When I have to track down who to properly send it to, it slows things down.
Attachment below will show you where your plate and PCB will go. You can see it's a tad complicated, but I have to account for everyone, and where everything will go. I sent this same spreadsheet to bavman.
-
ahem... why isn't my name there? Does it mean that it has already been shipped?
-
There are many tabs on the bottom of the spreadsheet, your name should be there.
-
my bad, I thought "search" would search across tabs.
anyway I don't want to make things complicated for you. I'll sell my stuff when I get it.
-
So apparently there were a few order transfers without letting me know. I'm not a mind reader you know. When I have to track down who to properly send it to, it slows things down.
Attachment below will show you where your plate and PCB will go. You can see it's a tad complicated, but I have to account for everyone, and where everything will go. I sent this same spreadsheet to bavman.
It's all good on my side :)
-
If anyone does want to get rid of their order now, later or whatever I'm interested in getting an ANSI125 plate and the pcb kit with teensy kit. Or any/all other pieces and parts.
I've had a few people offer me their extras but nothing has been finalized yet, hoping to hear back from a few people.
-
If anyone does want to get rid of their order now, later or whatever I'm interested in getting an ANSI125 plate and the pcb kit with teensy kit. Or any/all other pieces and parts.
I've had a few people offer me their extras but nothing has been finalized yet, hoping to hear back from a few people.
Let me know if there's any extra. I'd really want a set.
-
If anyone does want to get rid of their order now, later or whatever I'm interested in getting an ANSI125 plate and the pcb kit with teensy kit. Or any/all other pieces and parts.
I've had a few people offer me their extras but nothing has been finalized yet, hoping to hear back from a few people.
Let me know if there's any extra. I'd really want a set.
which plate are you wanting? Or are you just looking for the pcb kit.
-
If anyone does want to get rid of their order now, later or whatever I'm interested in getting an ANSI125 plate and the pcb kit with teensy kit. Or any/all other pieces and parts.
I've had a few people offer me their extras but nothing has been finalized yet, hoping to hear back from a few people.
Let me know if there's any extra. I'd really want a set.
which plate are you wanting? Or are you just looking for the pcb kit.
125 and kit : )
-
If anyone does want to get rid of their order now, later or whatever I'm interested in getting an ANSI125 plate and the pcb kit with teensy kit. Or any/all other pieces and parts.
I've had a few people offer me their extras but nothing has been finalized yet, hoping to hear back from a few people.
Let me know if there's any extra. I'd really want a set.
which plate are you wanting? Or are you just looking for the pcb kit.
125 and kit : )
Ok I'll keep an eye out and if I end up with extras I'm sure we could work something out.
-
WFD, sent you a PM about a plate transfer.
-
Attachment below will show you where your plate and PCB will go. You can see it's a tad complicated, but I have to account for everyone, and where everything will go. I sent this same spreadsheet to bavman.
If you don't have Excel like me, here is an online reader with already parsed Excel sheet: https://sheet.zoho.com/view.do?url=http%3A%2F%2Fgeekhack.org%2Findex.php%3Faction%3Ddlattach%3Btopic%3D39410.0%3Battach%3D22430
WFD, what's the status on the German package? Why am I listed there with a question mark?
-
WFD, I sent you a couple PMs so far about my plate coming direct to me, but it still shows as going to bavman on the spreadsheet. Sorry to be a bother, but it should come to me.
-
RBD150 - Last one for our ISO fans. 1.50 modifiers, split backspace, and short R-shift with 1x function key.
(http://img.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/th_RDB150.png) (http://smg.photobucket.com/albums/v288/WhiteFireDragon/keyboard/plates/?action=view¤t=RDB150.png)
There must be at least 150 total plates ordered for these price, and MOQ for each design is 15. For plates that don't reach 15pcs: They will either be canceled or if we're almost at 15, people from that plate's sub-group can buy up the rest and cost is split between the subgroup. I'll put an option in the order form that if it were be canceled, which plate you'd want the order to default to. If the 2nd preferred plate also gets canceled, you can either pick ANS125, ANS150, or cancel the whole thing. The only two design that well exceed the 15 MOQ are ANS125 and ANS150 based on the votes (https://docs.google.com/spreadsheet/viewanalytics?formkey=dE5ET3l3TW40ZXlsSlFpcVZKVFlucmc6MQ).
(example: You want a HHK150, the MOQ is not reached so your order will automatically default to WFD125. The WFD125 also doesn't reach 15 MOQ, so your order automatically defaults to ANS125).
ORDER FORM (https://docs.google.com/spreadsheet/viewform?formkey=dEg3d012cDVtaktsN2NvV1ZKa2FVS2c6MQ)
-
GB isn't open. However, IIRC the plates are Open Source, so you can download/make your own...though you need a phantom to do so...
-
UPDATE
I've started shipping plates a few days ago, so some people should start receiving them. If you've PM'ed me, I've read them and will update the spreadsheet (will link the google doc once everything is finalized). On average, each plate was $1.42 more than what I invoiced for because we did not meet MOQ from cancellations and non-payments. I had to get the lower quantity cut from Beast's local cutter, otherwise I'd lose even more money from lower price tiers. This extra cost is not much per plate, but did add up to a decent amount at 140 plates. You can pay this difference if you'd like, but I'm forcing you. Paypal is whitefiredragon1 @ hotmail . com *without the spaces* gift preferred. I won't be keeping track or check who's paying. Now to mention a few things about the plates:
My local laser cutting company: ANS125 - ANS150
Beast's local laser cutter: - ISO125 - ISO150 - PRF125 - HHK150 - WFD125 - RBD150
All plates from Beast are bent, so they MUST be bent flat again before you solder on the PCB, otherwise it'll bend the PCB and may not mount inside the case correctly. This should only take 5 minutes. Here are a few pics below to show what you can expect so there are no surprises when you get them:
Here are all the plates before I started shipping. All plates sourced from me were individually wrapped by the company, all plates from beast will come bare.
[attach=1]
Here's the noticeable bend in plates from Beast. Again, you must straighten it out before installing. Plates from my source are already flat, ready to install.
[attach=2]
They don't have the same surface finishes, so here's just a comparison. My source is line-grained going vertical and more smooth and reflective. Beast's source have the brushed finish going horizontal, look a tad whiter and less reflective. Beast's plate will also be some scratches, so I'm just letting you know these blemishes in advance.
[attach=3] [attach=4]
The bottom on Beast's plates have some track marks from the time saver machine. They also have blow-out marks from the molten steel during the cutting. These are on almost every hole, so just be careful you don't cut yourself on these marks. You can peel/pry them off if you'd like. Plates from my source have a very small burn outline on the bottom. No other marks.
[attach=5] [attach=6]
-
I'm just glad I bought extra plates now. WFD that looks like a really good cutting source you've got. Hopefully I can do a little work on the 2 plates using Beast's cutter and still get good results. Thanks again for organizing this.
So I'd like to pony up on the extra cost you incurred. Was the $1.42 for all the plates ordered, or just the plates you had to send to Beast's cutter?
-
can you break them when you bent them? :-[
-
can you break them when you bent them? :-[
It would be extremely hard to break a plate bending it straight. You simply place the edge on a table and gently apply pressure to the middle of the plate until it sits flat on a table
-
You simply place the edge on a table and gently apply pressure to the middle of the plate until it sits flat on a table
This didn't work for my Poker plate. I even put the plate between two flat wood boards and put approx. 30kg weight on it. Left it for 2 weeks. Still looked the same. I angrily bent it by hand in mid air. I roared like Bagger 288 (http://www.youtube.com/watch?v=azEvfD4C6ow) while doing so.
To be honest, I'm glad I got my plate from WFD's cutting shop, I just hope it won't bend during transit.
-
Yes I don't see how laying it flat could possibly straighten it. Steel is way too springy for that. You have to bend it in the opposite direction (carefully)
-
Yes I don't see how laying it flat could possibly straighten it. Steel is way too springy for that. You have to bend it in the opposite direction (carefully)
Exactly this, you need to push it the opposite way of the bend to make it flat
It's not hard, doesn't require a lot of force and can be done in 5 minutes max
-
Have these been sent to Bavman?
-
Yeah they're shipped. The hold up of plate and PCB shipments was because several orders were passed on to another person, and I also had to sort the mess from Profosist's group. Many of these people, especially the German sub-group, needed me to ship it instead of Profosist. All of this had to be worked out before bavman can send me the PCBs, and before I can send him the plates.
I just received my batch of PCBs, as well as Profosist's batch of PCBs that I'll now be handling.
-
So the plates and PCBs that were going to Profosist are no longer going to him?
-
That's correct, I have all of them right now. I can distribute these myself, or I can choose to ship to him. But seeing how he is right now, I doubt you'll want that.
-
As far as I'm concerned, you can send my order straight to me instead of to Prof first
-
My plates arrived today.
Very nice and sturdy.
Thank you WhiteFireDragon
-
If anyone is still looking for a ANS150, I have a couple available.
-
If anyone is still looking for a ANS150, I have a couple available.
JD, you got any extra pcb stuffs?
-
I also have a few extra plates
HHK150 - 1
ISO150 - 1
PRF125 - 1
RDB150 - 1
-
you are great beast, I'm sure someone will jump on those.
i will most likely be selling an extra ANSI 125 plate, i was going to save it for another project or another phantom but in reality that aint gonna happen.
-
mine have just arrived, thanks very much :)
-
I can't wait :)
-
Have ansi 125 been sent?
-
Hi WFD,
I didn't receive my plate, should I be worried ?
-
Ok if you don't fully know what's going on, I've sent one large batch of plates to bavman a while ago, so that he can combine them with PCBs to ship. I believe bavman just shipped out most the US orders, and working on the international ones. I only have a small batch of plates to ship out with PCBs. I just made this list public, use the tabs on the bottom to see if I have your plate or bavman has it. It also shows which plates you ordered:
https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE&usp=sharing (https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE&usp=sharing)
-
Cool thanks!
Yeah there was some confusion because he sent out some pcbs that had a plate with them.
-
Ok if you don't fully know what's going on, I've sent one large batch of plates to bavman a while ago, so that he can combine them with PCBs to ship. I believe bavman just shipped out most the US orders, and working on the international ones. I only have a small batch of plates to ship out with PCBs. I just made this list public, use the tabs on the bottom to see if I have your plate or bavman has it. It also shows which plates you ordered:
https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE&usp=sharing (https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE&usp=sharing)
So what does the color between green and yellow mean? It's not in your legend. Just trying to figure out where my plate is and or where it is going. Thanks
-
Same as green. Those are different color for me and bavman to keep track that those ones were manually added at the end. Bavman has yours, and he should be combining it with your PCB to ship.
-
Cool thanks for the quick answer.
-
I've PM'd you about my order WFD. Just wondering if I could get a quick reply?
Cheers mate :)
-
Got my plate and PCB today. Thanks!
-
Same as green. Those are different color for me and bavman to keep track that those ones were manually added at the end. Bavman has yours, and he should be combining it with your PCB to ship.
Got it today. It was waiting for me when I got home. WFD, that plate is gorgeous. Thanks so much for doing this.
-
woud love my plate so i could sell a phantom kit :P
-
I've already shipped out everything I'm suppose to. I told bavman I'm willing to help him with some of the shipping, but he insisted to take care of the orders he messed up on (specifically yours, turkishrambo). Not sure why bavman has been MIA for so long. Hope he's ok.
https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE#gid=1 (https://docs.google.com/spreadsheet/ccc?key=0AraAg2A1x5csdHlwNWpJSnl0OFAyZHdzMVA5TWg2UkE#gid=1)
-
Ohhhh, sorry WFD, those are the plates bavman has. Yeah... im starting to lose hope.
-
Ohhhh, sorry WFD, those are the plates bavman has. Yeah... im starting to lose hope.
I'm in the same situation (waiting for 2 plates), WFD informed me that bavman didn't ship my plates with my PCB and he would fix this. I hope this will be solved sooner or later :S
-
Ohhhh, sorry WFD, those are the plates bavman has. Yeah... im starting to lose hope.
I'm in the same situation (waiting for 2 plates), WFD informed me that bavman didn't ship my plates with my PCB and he would fix this. I hope this will be solved sooner or later :S
In the PCB thread, it was said that something has happened in bav's life at the moment but he is ok. I don't know what that means about receiving our things but I'm glad we didn't lose a member to another out of right field accident.
-
Ohhhh, sorry WFD, those are the plates bavman has. Yeah... im starting to lose hope.
I'm in the same situation (waiting for 2 plates), WFD informed me that bavman didn't ship my plates with my PCB and he would fix this. I hope this will be solved sooner or later :S
In the PCB thread, it was said that something has happened in bav's life at the moment but he is ok. I don't know what that means about receiving our things but I'm glad we didn't lose a member to another out of right field accident.
I'm glad we don't have to lament any tragedy. I also hope he can finish with the shipping at some point :)
-
I know I'm extremely late to this party, but if there was a spare ISO150 plate floating around somewhere, I wouldn't mind giving it a new home.
-
I know I'm extremely late to this party, but if there was a spare ISO150 plate floating around somewhere, I wouldn't mind giving it a new home.
Ansi150 more common.
-
Yeap, same here - if anyone has any spare ANSI125 plate I would be very interested! :D
-
I know I'm extremely late to this party, but if there was a spare ISO150 plate floating around somewhere, I wouldn't mind giving it a new home.
The_Beast has an ISO plate for sale in his personal buy/sell thread. It's not completely standard, but it is ISO with a 1.5 bottom row.
link: http://geekhack.org/index.php?topic=44032.msg907548#msg907548 (http://geekhack.org/index.php?topic=44032.msg907548#msg907548)
-
I know I'm extremely late to this party, but if there was a spare ISO150 plate floating around somewhere, I wouldn't mind giving it a new home.
The_Beast has an ISO plate for sale in his personal buy/sell thread. It's not completely standard, but it is ISO with a 1.5 bottom row.
link: http://geekhack.org/index.php?topic=44032.msg907548#msg907548 (http://geekhack.org/index.php?topic=44032.msg907548#msg907548)
I don't think he has anymore, I'm looking for a ANSI125 or ANSI150... Anyone has one for sell? WFD said he shipped mine since July.. And it's almost November now and I still haven't received it.
-
I'm interested in ansi 125 as well
What's the minimum quota?
I can use 3
Thanks
-
Where is my stuff from this GB?
-
I've already fulfilled more than I'm expected to for this plate GB. This specific thread should be done now, so check the other threads for updates.