geekhack

geekhack Marketplace => Classifieds => Topic started by: The_Beast on Wed, 13 March 2013, 14:18:33

Title: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Wed, 13 March 2013, 14:18:33
With Suits - $26 - 0 Left
(http://i.imgur.com/osIrh4Uh.png)

Blank - $25 - 0 Left
(http://i.imgur.com/odnuI2Qh.png)


Shipping (around 4/2)
CONUS - $7 via padded priority mail
International - $18 via first class (single plate, not 100% sure on price)


Payment
I'll send invoices sometime next week to collect money!



Order here! (https://docs.google.com/forms/d/1ccKTaWy3hEfS7AvoSntzd3m6eRDOjER0a2P1Q9TJnko/viewform)



Any other questions should be answered in this thread or post:
http://geekhack.org/index.php?topic=36039.msg673174#msg673174


Why the higher than GB price? Low wait time, I'm paying for them up front and I could use the money for GH60 case prototype/school expenses.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 20:02:53
Check your order here! (https://docs.google.com/spreadsheet/pub?key=0AupmMn7qWaZ8dEFpc2NEWTIxNTB1UXlUajgxVXhoaGc&output=html)
Title: [Pre-order] Stainless Steel Poker Plates
Post by: shadewolf on Wed, 13 March 2013, 20:03:42
Did this require approval? Would explain why I got an email alert for it, but couldn't find the thread. Has happened in the past to me as well...time to head to the bug reports thread :D
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: esoomenona on Wed, 13 March 2013, 20:05:06
Ooohh, more plates!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 20:10:30
Quote from: shadewolf on Wed, 13 March 2013, 20:03:42
Did this require approval? Would explain why I got an email alert for it, but couldn't find the thread. Has happened in the past to me as well...time to head to the bug reports thread :D

Yea, IDK why it took soo long for approval


Quote from: esoomenona on Wed, 13 March 2013, 20:05:06
Ooohh, more plates!

Good, now order some :P
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: metalliqaz on Wed, 13 March 2013, 20:37:27
I can't buy these plates!  They're backwards :P
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Jocelyn on Wed, 13 March 2013, 20:38:14
Quote from: metalliqaz on Wed, 13 March 2013, 20:37:27
I can't buy these plates!  They're backwards :P

lol
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Turkishrambo on Wed, 13 March 2013, 20:39:18
Hell yes, in for a couple suits plates.
And i just messed up my address....resubmitting..lol
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 20:40:22
Quote from: metalliqaz on Wed, 13 March 2013, 20:37:27
I can't buy these plates!  They're backwards :P

I have the guy cut from the bottom, so that the burrs end up on the top. Since those burrs are on the top, he "time saves" (basically a big drum sander) them to give it that sanded finish
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Michael on Wed, 13 March 2013, 20:46:39
Quote from: metalliqaz on Wed, 13 March 2013, 20:37:27
I can't buy these plates!  They're backwards :p

(http://i1166.photobucket.com/albums/q603/magicmeatballs/GIFS/tumblr_m26j5jceiN1r454qg_zpsb737dddb.gif)
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 20:50:41
Quote from: Turkishrambo on Wed, 13 March 2013, 20:39:18
Hell yes, in for a couple suits plates.
And i just messed up my address....resubmitting..lol

That's fine, I deleted your first order :P
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Turkishrambo on Wed, 13 March 2013, 20:51:57
Quote from: The_Beast on Wed, 13 March 2013, 20:50:41
Quote from: Turkishrambo on Wed, 13 March 2013, 20:39:18
Hell yes, in for a couple suits plates.
And i just messed up my address....resubmitting..lol

That's fine, I deleted your first order :P

hahah yeah i pressed tab and then enter by accident, not just enter. Derp.

Thank you.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 20:53:55
Quote from: Turkishrambo on Wed, 13 March 2013, 20:51:57
Quote from: The_Beast on Wed, 13 March 2013, 20:50:41
Quote from: Turkishrambo on Wed, 13 March 2013, 20:39:18
Hell yes, in for a couple suits plates.
And i just messed up my address....resubmitting..lol

That's fine, I deleted your first order :P

hahah yeah i pressed tab and then enter by accident, not just enter. Derp.

Thank you.

No big deal :P


Oh yea, and I'll be modifying the stabilized switches so that you can open them.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: GeorgeK on Wed, 13 March 2013, 21:24:35
Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Jocelyn on Wed, 13 March 2013, 21:25:25
Quote from: GeorgeK on Wed, 13 March 2013, 21:24:35
Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!
Yes :)

Quote from: The_Beast on Wed, 13 March 2013, 21:27:26
Yes, and I'll be modding the 2x switches so that you can open those as well

That's so nice that you're doing that.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Wed, 13 March 2013, 21:27:26
Quote from: GeorgeK on Wed, 13 March 2013, 21:24:35
Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!

Yes, and I'll be modding the 2x switches so that you can open those as well
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: esoomenona on Wed, 13 March 2013, 21:32:57
Quote from: The_Beast on Wed, 13 March 2013, 21:27:26
Quote from: GeorgeK on Wed, 13 March 2013, 21:24:35
Can you still open the switch after installing this plate or not? If you can then I'm definitely in for one!

Yes, and I'll be modding the 2x switches so that you can open those as well
Well now I HAVE to get at least one...
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: CommunistWitchDr on Wed, 13 March 2013, 23:31:30
Ordered one with suits.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.

Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: eyesmiles on Thu, 14 March 2013, 01:00:37
Apologies beast, I realized I messed up on my address too. I got too excited and didn't read. Resubmitting order.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Jocelyn on Thu, 14 March 2013, 01:00:54
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.

Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello

ROFL!!!

Quote from: Jocelyn on Thu, 14 March 2013, 01:00:54
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.
Quote from: The_Beast on Thu, 14 March 2013, 01:04:12
Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello

ROFL!!!

Gotta give that man props. He melts minds with dat guitar

Absolutely, but that was still pretty funny :)
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: gnubag on Thu, 14 March 2013, 01:02:20
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.

Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello

are you sure?

sad anyways. still ordered 2 plates.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 01:04:12
Quote from: eyesmiles on Thu, 14 March 2013, 01:00:37
Apologies beast, I realized I messed up on my address too. I got too excited and didn't read. Resubmitting order.

Yup re-submit your entire order, I'll delete old orders


Quote from: Jocelyn on Thu, 14 March 2013, 01:00:54
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.

Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello

ROFL!!!

Gotta give that man props. He melts minds with dat guitar


Quote from: gnubag on Thu, 14 March 2013, 01:02:20
Quote from: The_Beast on Thu, 14 March 2013, 01:00:04
Quote from: gnubag on Thu, 14 March 2013, 00:42:23
is that your address in the google form? because I could pick them up (i go to school 10 min away) instead you shipping them, to lower the cost and save packing material.

Sadly, I am not Tom Morello

http://en.wikipedia.org/wiki/Tom_Morello

are you sure?

sad anyways. still ordered 2 plates.

Yea, just a fake address to show comma separated values
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: GeorgeK on Thu, 14 March 2013, 01:30:13
Awesome - ordered :D

I think I did the address right (although I have only just woken up so it could be entirely wrong...)

Edit: Was that Tipro part of any use in the end?
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: alixinhzai on Thu, 14 March 2013, 01:43:23
shipping killed me :(
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 01:43:24
Quote from: GeorgeK on Thu, 14 March 2013, 01:30:13
Awesome - ordered :D

I think I did the address right (although I have only just woken up so it could be entirely wrong...)

Edit: Was that Tipro part of any use in the end?

I haven't even tried it yet. Too busy with other stuff
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: tricheboars on Thu, 14 March 2013, 01:46:41
I think I just got the last poker plate with suits. Thanks. This will come in handy.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: GeorgeK on Thu, 14 March 2013, 01:47:47
Quote from: The_Beast on Thu, 14 March 2013, 01:43:24
Quote from: GeorgeK on Thu, 14 March 2013, 01:30:13
Awesome - ordered :D

I think I did the address right (although I have only just woken up so it could be entirely wrong...)

Edit: Was that Tipro part of any use in the end?

I haven't even tried it yet. Too busy with other stuff

Fair enough - I know that feeling!  I assume my order went through alright and the address is ok?
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 01:48:47
Quote from: GeorgeK on Thu, 14 March 2013, 01:47:47
Quote from: The_Beast on Thu, 14 March 2013, 01:43:24
Quote from: GeorgeK on Thu, 14 March 2013, 01:30:13
Awesome - ordered :D

I think I did the address right (although I have only just woken up so it could be entirely wrong...)

Edit: Was that Tipro part of any use in the end?

I haven't even tried it yet. Too busy with other stuff

Fair enough - I know that feeling!  I assume my order went through alright and the address is ok?


Looks good, if I have any problems I'll just PM you :D
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: GeorgeK on Thu, 14 March 2013, 02:13:59
Cheers buddy :D What stabilisers do you need for these?
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: matt1986 on Thu, 14 March 2013, 02:25:45
Order placed!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 02:26:24
Quote from: GeorgeK on Thu, 14 March 2013, 02:13:59
Cheers buddy :D What stabilisers do you need for these?

You can use cherry PCB or plate mount. Costar can work, but you might have to sand the plate down a bit.

Costar needs around 0.060" thickness and these plate will be around 0.0625"
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: GeorgeK on Thu, 14 March 2013, 02:37:48
Quote from: The_Beast on Thu, 14 March 2013, 02:26:24
Quote from: GeorgeK on Thu, 14 March 2013, 02:13:59
Cheers buddy :D What stabilisers do you need for these?

You can use cherry PCB or plate mount. Costar can work, but you might have to sand the plate down a bit.

Costar needs around 0.060" thickness and these plate will be around 0.0625"

Fair enough - any idea where I can get plate mounted cherry stabilisers from?  Just as my Poker's current PCB mount ones are not so great - the spacebar ones come out every time I remove the spacebar for example...
Title: [Pre-order] Stainless Steel Poker Plates
Post by: badcop on Thu, 14 March 2013, 05:35:10
Ordered. Thank you!!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: do_Og@n on Thu, 14 March 2013, 06:14:30
I would like one with the suits when they become available. Order form filled out.

SWEET!!!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Tarzan on Thu, 14 March 2013, 07:53:16
Ordered two of the Poker suit plates.  Slowly accumulating the parts to build my first keyboard...

Is there a list somewhere detailing all the parts I should be looking out for?  I figure I need the items below, am I missing some stuff?

1. PCB
2. Case
3. Backing plate
4. Key switches
5. Key caps  :rolleyes:
6. USB cable (plus some way to connect to the board - USB connector for the case?)



Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: metalliqaz on Thu, 14 March 2013, 07:56:50
Missing stabilizers.  I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too.  Also, probably LEDs
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Tarzan on Thu, 14 March 2013, 08:03:47
Quote from: metalliqaz on Thu, 14 March 2013, 07:56:50
Missing stabilizers.  I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too.  Also, probably LEDs

Thanks! I'll add those to the list.  Now to order that Hakko soldering iron everyone keeps raving about.   ;D
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 08:15:02
Quote from: Greystoke on Thu, 14 March 2013, 07:53:16
Ordered two of the Poker suit plates.  Slowly accumulating the parts to build my first keyboard...

Is there a list somewhere detailing all the parts I should be looking out for?  I figure I need the items below, am I missing some stuff?

1. PCB
2. Case
3. Backing plate
4. Key switches
5. Key caps  :rolleyes:
6. USB cable (plus some way to connect to the board - USB connector for the case?)





Quote from: metalliqaz on Thu, 14 March 2013, 07:56:50
Missing stabilizers.  I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too.  Also, probably LEDs

Poker PCB has SMD diodes already installed. Unfortunately for you, now that the Poker DIY GB is over, and iMav sold all the leftover Poker PCBs, there is really no way to build a Poker from the ground up like that. You could either: 1. Buy a used Poker from someone and install your plate; or 2. Wait for the GH60 GB, and order the parts you need there.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: mashby on Thu, 14 March 2013, 08:54:15
Already out of the plates with the Poker Suit?  Holy hell those sold fast!  :eek:

Nice job Beast!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: tricheboars on Thu, 14 March 2013, 09:28:16
Beast you are a beast.

When you get a chance can you let me know if i was quick enough to snag up a suit plate before the counter hit 0?

also i am interested where i might find plate mounted switches as well. is this site's classifieds the best place to look? i am looking to build a 60% with greens.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Tarzan on Thu, 14 March 2013, 09:30:47
Quote from: jdcarpe on Thu, 14 March 2013, 08:15:02
Quote from: Greystoke on Thu, 14 March 2013, 07:53:16
Ordered two of the Poker suit plates.  Slowly accumulating the parts to build my first keyboard...

Is there a list somewhere detailing all the parts I should be looking out for?  I figure I need the items below, am I missing some stuff?

1. PCB
2. Case
3. Backing plate
4. Key switches
5. Key caps
6. USB cable (plus some way to connect to the board - USB connector for the case?)


Quote from: metalliqaz on Thu, 14 March 2013, 07:56:50
Missing stabilizers.  I don't know what the poker PCBs came with, but if they don't include diodes, you would need those too.  Also, probably LEDs

Poker PCB has SMD diodes already installed. Unfortunately for you, now that the Poker DIY GB is over, and iMav sold all the leftover Poker PCBs, there is really no way to build a Poker from the ground up like that. You could either: 1. Buy a used Poker from someone and install your plate; or 2. Wait for the GH60 GB, and order the parts you need there.

I'll keep those options in mind, thanks for the info!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: tricheboars on Thu, 14 March 2013, 09:56:02
well using a GH60 PCB is certainly my backup plan. it is only my backup plan since komar stated that we are looking at a November hitting doorsteps time frame. but i would really like to build something before that.

you guys don't think we will see some poker PCBs released before this summer? and doing another group buy is a no go?
Title: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 10:32:17
I'm hoping we can get GH60s to people before November. I think there is some possibility that people might have them around September...if all goes well.

The iMav/Vortex DIY Poker group buy was a one-time opportunity. And the Poker has been superseded and is no longer being produced. So no, I don't think you will see any more Poker PCB available for sale at all.

Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: mashby on Thu, 14 March 2013, 11:21:07
Quote from: tricheboars on Thu, 14 March 2013, 09:28:16
also i am interested where i might find plate mounted switches as well. is this site's classifieds the best place to look? i am looking to build a 60% with greens.

I was looking for the same thing and I ended up purchasing them from 7bit over on Deskthority.net (http://deskthority.net/marketplace-f11/cherry-mx-taking-pre-orders-t2760.html). I haven't taken receipt of the switches yet, but 7bit is shipping my partial order this week (or so I'm told).

It looks like MX-Green are not currently in stock, but you could always make Ghetto Greens by purchasing MX-Blue switches and then getting some stiffer springs.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: CaptainAsshat on Thu, 14 March 2013, 11:39:47
Do you have plans to run any other plate designs?  I am working on a custom design but even your single unit prices seem to be much better than any I'm seeing.

I am interested more in a larger layout similar to a tkl but with a numpad instead of arrows and scrolls keys.  Possibly made of anodized aluminum.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 11:42:39
Keep ordering ones with suits if you want them. I already sent in the order but I'm sure I can still add some. If you want to change your order, just resubmit the order and I will delete your first order completely
Title: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 11:50:40
Quote from: CaptainAsshat on Thu, 14 March 2013, 11:39:47
Do you have plans to run any other plate designs?  I am working on a custom design but even your single unit prices seem to be much better than any I'm seeing.

I am interested more in a larger layout similar to a tkl but with a numpad instead of arrows and scrolls keys.  Possibly made of anodized aluminum.

I made what you're looking for already. Click on the Keyboard Prototyping link in my signature, and at the bottom of the 2nd post, there is an attachment called TK.dwg. That's what you want.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 12:03:23
Quote from: GeorgeK on Thu, 14 March 2013, 02:37:48
Quote from: The_Beast on Thu, 14 March 2013, 02:26:24
Quote from: GeorgeK on Thu, 14 March 2013, 02:13:59
Cheers buddy :D What stabilisers do you need for these?

You can use cherry PCB or plate mount. Costar can work, but you might have to sand the plate down a bit.

Costar needs around 0.060" thickness and these plate will be around 0.0625"

Fair enough - any idea where I can get plate mounted cherry stabilisers from?  Just as my Poker's current PCB mount ones are not so great - the spacebar ones come out every time I remove the spacebar for example...

Not really. I have some plate mount cherry stabilizers, but I don't think he has anymore in stock
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: badcop on Thu, 14 March 2013, 12:14:12
Quote from: The_Beast on Thu, 14 March 2013, 11:42:39
Keep ordering ones with suits if you want them. I already sent in the order but I'm sure I can still add some. If you want to change your order, just resubmit the order and I will delete your first order completely

resubmitted the order for two reasons.  I didn't notice the format in which you wanted the addresses and i changed my order from blank plates to suits.

thanks beast.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 12:28:12
Quote from: badcop on Thu, 14 March 2013, 12:14:12
Quote from: The_Beast on Thu, 14 March 2013, 11:42:39
Keep ordering ones with suits if you want them. I already sent in the order but I'm sure I can still add some. If you want to change your order, just resubmit the order and I will delete your first order completely

resubmitted the order for two reasons.  I didn't notice the format in which you wanted the addresses and i changed my order from blank plates to suits.

thanks beast.

Got it!

BTW, I added a link in the second post to check your order!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: SmallFry on Thu, 14 March 2013, 12:33:15
So... I can haz switch toolz?
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 12:40:05
Quote from: SmallFry on Thu, 14 March 2013, 12:33:15
So... I can haz switch toolz?

Once I test the lube station....
Title: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 12:40:44
I need to test it also...
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: Goodfella on Thu, 14 March 2013, 12:46:12
This looks pretty cool! Unfortunately I think I am going to sell my Poker, I just never use it anymore, fell in love with the red switches on my QFR...
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 12:56:20
I'll be sending the final order in tomorrow and ordering 2 extra of each.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: CaptainAsshat on Thu, 14 March 2013, 13:02:07
Quote from: jdcarpe on Thu, 14 March 2013, 11:50:40
Quote from: CaptainAsshat on Thu, 14 March 2013, 11:39:47
Do you have plans to run any other plate designs?  I am working on a custom design but even your single unit prices seem to be much better than any I'm seeing.

I am interested more in a larger layout similar to a tkl but with a numpad instead of arrows and scrolls keys.  Possibly made of anodized aluminum.

I made what you're looking for already. Click on the Keyboard Prototyping link in my signature, and at the bottom of the 2nd post, there is an attachment called TK.dwg. That's what you want.

I am trying to have one made.  I do not need a drawing, but thank you.
Title: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 13:06:29
Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project! :)
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: CaptainAsshat on Thu, 14 March 2013, 13:09:53
Quote from: jdcarpe on Thu, 14 March 2013, 13:06:29
Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project! :)

I'm sorry I was under the impression that I was misunderstood, not that you were offering the files to beast.  I didn't mean to be short, I am just at work.  The origin of the files is not important to me.  Apologies  :)
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: jdcarpe on Thu, 14 March 2013, 16:13:55
Quote from: CaptainAsshat on Thu, 14 March 2013, 13:09:53
Quote from: jdcarpe on Thu, 14 March 2013, 13:06:29
Well, The_Beast needs drawing files to send the laser cutter in order to have them made. But I'm sorry to intrude, if you already had a drawing. Good luck with your project! :)

I'm sorry I was under the impression that I was misunderstood, not that you were offering the files to beast.  I didn't mean to be short, I am just at work.  The origin of the files is not important to me.  Apologies  :)

No problem. I just didn't want you to have to duplicate effort, if you needed a plate drawing for the laser cutter to use. One thing you really need for that design is a custom case, since the size will be about 1-unit (0.75 inches) wider than current TKL designs. You can always make a temporary case out of cardboard. :)

You can use the "lowpoly" method linked in my Keyboard Prototyping thread to wire the switches directly to the (Teensy) controller. Alternately, you can design a PCB around that layout and have a prototype made in your design, to complement the plate.

Anyway, if you want to discuss new design ideas, we can take it to the thread I mentioned. Sorry for the threadcrapping, The_Beast!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 23:22:24
Just a reminder, final order is going in in about 12 hours
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: do_Og@n on Thu, 14 March 2013, 23:40:46
Are you going to send out invoices?
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Thu, 14 March 2013, 23:42:18
Quote from: do_Og@n on Thu, 14 March 2013, 23:40:46
Are you going to send out invoices?

Yea, sometime next week. But honestly it doesn't really matter as long as I get paid before shipping.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 08:43:28
Bump, closing in 2 hours
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: turtle on Fri, 15 March 2013, 10:01:21
in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 10:48:53
Quote from: turtle on Fri, 15 March 2013, 10:01:21
in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!

Got it!


You can always check the status in post #2.
Title: Re: [Pre-order] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 13:09:10
Closed and order sent with 2 extra of each plate
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: GeorgeK on Fri, 15 March 2013, 13:15:54
Oooh exciting (well as exciting as the prospect of desoldering and resoldering 70 odd switches can be anyway...)

Thanks for this The_Beast! :D
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 13:33:42
Quote from: GeorgeK on Fri, 15 March 2013, 13:15:54
Oooh exciting (well as exciting as the prospect of desoldering and resoldering 70 odd switches can be anyway...)

Thanks for this The_Beast! :D

61, I've counted too many times

No problem. People have been asking for plates and I need a bit of scratch for other projects so..... (next will be lube station and switch tools)
Title: [Closed] Stainless Steel Poker Plates
Post by: turtle on Fri, 15 March 2013, 13:48:46
Quote from: The_Beast on Fri, 15 March 2013, 10:48:53
Quote from: turtle on Fri, 15 March 2013, 10:01:21
in for 1 with suits.. Order submitted. Let me know if you didnt receive it. thank you!

Got it!


You can always check the status in post #2.

Sweet! Thanks!!!
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: boost on Fri, 15 March 2013, 14:31:02
O_O I missed it...
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: esoomenona on Fri, 15 March 2013, 14:31:41
^I have a round one for you.
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 14:32:19
Quote from: boost on Fri, 15 March 2013, 14:31:02
O_O I missed it...

I ordered 2 extra blanks and 2 extra suits, send me a PM and I'll add you. But I will not be adding anymore to my order with the cutter, these 4 are the only ones available
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: boost on Fri, 15 March 2013, 14:37:25
Quote from: The_Beast on Fri, 15 March 2013, 14:32:19
Quote from: boost on Fri, 15 March 2013, 14:31:02
O_O I missed it...

I ordered 2 extra blanks and 2 extra suits, send me a PM and I'll add you. But I will not be adding anymore to my order with the cutter, these 4 are the only ones available

:D

PM'ed
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: do_Og@n on Fri, 15 March 2013, 20:19:48
Have you already sent out the invoices?
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: The_Beast on Fri, 15 March 2013, 20:33:29
Quote from: do_Og@n on Fri, 15 March 2013, 20:19:48
Have you already sent out the invoices?


Nope


Check your order status here! (https://docs.google.com/spreadsheet/pub?key=0AupmMn7qWaZ8dEFpc2NEWTIxNTB1UXlUajgxVXhoaGc&output=html)
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: The_Beast on Sat, 16 March 2013, 17:59:20
Quote from: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me :D


BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me :P
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: Gupgup on Sat, 16 March 2013, 18:03:38
Quote from: The_Beast on Sat, 16 March 2013, 17:59:20
Quote from: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me :D


BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me :P

How is the lube station situation looking? I'm in desperate need of one :D
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: The_Beast on Sat, 16 March 2013, 18:06:09
Quote from: Gupgup on Sat, 16 March 2013, 18:03:38
Quote from: The_Beast on Sat, 16 March 2013, 17:59:20
Quote from: SmallFry on Sat, 16 March 2013, 13:28:02
Nice and quick. (INB4TWSS) Nice GB Beast!

Not technically a GB since I'm buying up front. However, I can see myself doing these mini "group buys" more often. They're smaller (less shipping for me to deal with), faster (good for everyone), smoother running (not nearly as many PM's asking questions) and I make a bit of money (since this isn't a GB, I think that's fair especially when I'm fronting the money to order)

I think this is how the lube station and switch tool buy is going to go since it's sooooo much smoother and easier for me :D


BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me :P

How is the lube station situation looking? I'm in desperate need of one :D

With this poker plate order, I sent in a single station to be cut. I want to make sure that the way I have the stem cutouts is correct before ordering a bunch.
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Gupgup on Sat, 16 March 2013, 19:19:54
Awesome, great to hear! If it is correct, go ahead and just send that station with my poker plate :p
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Sat, 16 March 2013, 20:16:18
Too late. He's sending it to me along with my order. :P
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sun, 17 March 2013, 18:14:04
Quote from: jdcarpe on Sat, 16 March 2013, 20:16:18
Too late. He's sending it to me along with my order. :P

Maybe :P (It'll be there)


BTW I still have one with suits and 2 blank plates. If anyone wants them, pm me
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Neal on Sun, 17 March 2013, 19:10:28
Took a blank one, nice.  ;D
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: emusan on Sun, 17 March 2013, 19:12:32
managed to get in!! :D yayz ^_^ The_Beast is awesome!!
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sun, 17 March 2013, 19:25:22
Single blank plate left! ^^ Thanks for ordering guys ^___^
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Wed, 20 March 2013, 00:11:08
Been busy this week but should have a break on Thursday to do domestic invoices, international on Friday. I'll be picking up the plate sometime next week and shipping shorty after that


BTW I still have a single blank plate for sale!
Title: Re: [Closed] Stainless Steel Poker Plates
Post by: CommunistWitchDr on Wed, 20 March 2013, 00:33:53
Quote from: The_Beast on Fri, 15 March 2013, 13:33:42

No problem. People have been asking for plates and I need a bit of scratch for other projects so..... (next will be lube station and switch tools)
If switch tools means what I think it does this is gonna be great.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: tricheboars on Wed, 20 March 2013, 01:51:56
my wallet is at the ready.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: duq on Wed, 20 March 2013, 02:05:11
dibs on the single plate left. still avail?
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Wed, 20 March 2013, 10:36:30
All gone!


Invoicing soon, thanks again folks!
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: tricheboars on Wed, 20 March 2013, 11:40:30
super stoked about this little dude. thanks beast. lovin the check your order link.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: badcop on Thu, 21 March 2013, 10:37:26
payment sent!
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Tarzan on Thu, 21 March 2013, 10:44:26
Payment sent
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Thu, 21 March 2013, 10:46:27
All invoices sent to CONUS buyers. I'll do international invoices later tonight or tomorrow

Also, thanks for paying guys :D!
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: tricheboars on Thu, 21 March 2013, 12:45:22
Payment sent.

This was perfect timing for the GH60 Group Buy. Suits Suits Suits! My custom will have a bit more flair now.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: gnubag on Thu, 21 March 2013, 12:47:51
is there anybody who still needs 2 plates?

i maybe have to back off because of school/financial issues.
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: duq on Thu, 21 March 2013, 13:50:30
Paid. :)
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: badcop on Thu, 21 March 2013, 13:59:03
beast - do you know if this plate will work with the GH60?  i'm assuming so?
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Thu, 21 March 2013, 14:00:34
It will. :D
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Thu, 21 March 2013, 14:00:55
Quote from: badcop on Thu, 21 March 2013, 13:59:03
beast - do you know if this plate will work with the GH60?  i'm assuming so?

Should. Not giving any promises tho
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Thu, 21 March 2013, 14:04:46
Quote from: The_Beast on Thu, 21 March 2013, 14:00:55
Quote from: badcop on Thu, 21 March 2013, 13:59:03
beast - do you know if this plate will work with the GH60?  i'm assuming so?

Should. Not giving any promises tho

I promise it will, though. :P
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sat, 23 March 2013, 21:15:21
All international invoices have been sent. There was one that was less than $18 because they were in Canada and one that was more but that was because it was 2 plates vs the one plate order that I estimated shipping with.


Also, someone dropped their order and have I have a single blank plate to buy
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: cenqsc on Sun, 24 March 2013, 01:40:10
Quote from: The_Beast on Sat, 23 March 2013, 21:15:21
Also, someone dropped their order and have I have a single blank plate to buy

i would take it
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sun, 24 March 2013, 01:48:30
Quote from: cenqsc on Sun, 24 March 2013, 01:40:10
Quote from: The_Beast on Sat, 23 March 2013, 21:15:21
Also, someone dropped their order and have I have a single blank plate to buy

i would take it

PM me your address and PP email
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Neal on Sun, 24 March 2013, 10:01:41
Paid
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: eon on Sun, 24 March 2013, 10:19:22
Also paid!

@The_Beast: please ignore the PayPal shipping address, the one I gave in the order form is the right address. Thanks
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sun, 24 March 2013, 10:38:54
Quote from: eon on Sun, 24 March 2013, 10:19:22
Also paid!

@The_Beast: please ignore the PayPal shipping address, the one I gave in the order form is the right address. Thanks

I'll be shipping to the address you gave me on the order form. I also copy and pasted what you had on the order form to the notes section of the invoice if you want to double check.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: eon on Sun, 24 March 2013, 11:52:32
Yep, that's fine, thanks!
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Turkishrambo on Sun, 24 March 2013, 11:55:03
Beast, i will be paying monday at midnight when my bills get processed, Thanks
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Sun, 24 March 2013, 19:50:44
Quote from: Turkishrambo on Sun, 24 March 2013, 11:55:03
Beast, i will be paying monday at midnight when my bills get processed, Thanks

That's fine, I don't care when you pay just as long as you pay for your order (so I'm not left with too many left over plates)
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Mon, 25 March 2013, 11:01:07
My laser guy had a death in the family and was out of the office for a while. So plates are delayed but they should be done on Thursday. I have a test in Friday and visiting family that weekend. So they'll ship that Thursday or sometime during the first week of April.

Sorry about the small delay in shipping :(
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Mon, 25 March 2013, 12:02:19
Thank you for the update. My condolences to the family.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Mon, 25 March 2013, 12:19:32
Quote from: jdcarpe on Mon, 25 March 2013, 12:02:19
Thank you for the update. My condolences to the family.

It was his wife's grandfather, not super close family but he still needed to be out of the office. BTW I don't know if he'll bend those plates. I have a metals professor who will let me use a box and pan break so it I should still be able to bend those things :P
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Mon, 25 March 2013, 12:51:25
Quote from: The_Beast on Mon, 25 March 2013, 12:19:32
Quote from: jdcarpe on Mon, 25 March 2013, 12:02:19
Thank you for the update. My condolences to the family.

It was his wife's grandfather, not super close family but he still needed to be out of the office. BTW I don't know if he'll bend those plates. I have a metals professor who will let me use a box and pan break so it I should still be able to bend those things :P

However the plates get bent is fine with me. I appreciate you doing it for me. :)
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: duq on Mon, 25 March 2013, 12:59:01
What is this bent talk going on about!?
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Mon, 25 March 2013, 13:00:30
Quote from: duq on Mon, 25 March 2013, 12:59:01
What is this bent talk going on about!?

some custom plates and a lube station
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: jdcarpe on Mon, 25 March 2013, 13:25:59
Quote from: The_Beast on Mon, 25 March 2013, 13:00:30
Quote from: duq on Mon, 25 March 2013, 12:59:01
What is this bent talk going on about!?

some custom plates and a lube station

Which is the reason I am the only one who hasn't been invoiced yet. The_Beast has been helping me get some custom plate designs made, and it's been a great help to me.
Title: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: duq on Mon, 25 March 2013, 16:13:16
Cool JW.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: do_Og@n on Tue, 26 March 2013, 22:05:42
Invoice received and paid. Thanks again for all your work on this.
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Turkishrambo on Thu, 28 March 2013, 20:23:06
sorry for not paying yet. Paying tonight ASAP. sorry beast <3
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Fri, 29 March 2013, 00:38:46
Yo boost! Pay up or the knee breakers will be headed your way!

Single blank plate still up for sale! I'll be shipping asap, gotta do family stuff this weekend
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: Neal on Fri, 29 March 2013, 11:37:28
Take it easy (but ship mine first. *cough*)

Just kidding.  :))
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: tricheboars on Fri, 29 March 2013, 12:33:39
exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: The_Beast on Fri, 29 March 2013, 18:01:32
Quote from: tricheboars on Fri, 29 March 2013, 12:33:39
exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?

I'll be doing my own GH60 plates. I don't know what layouts I want tho...


It's a bit more since I'm doing small orders, but then I know they're right (WFD's last plates didn't turn out all that great)
Title: Re: [Closed] Stainless Steel Poker Plates - Boost Pay! 1 Blank left!
Post by: samwisekoi on Fri, 29 March 2013, 18:23:41
Quote from: The_Beast on Wed, 13 March 2013, 14:18:33
Blank - $25 - 1 Left
Show Image
(http://i.imgur.com/odnuI2Qh.png)


I will take the last one if it is still available.

 - Ron | samwisekoi
(http://www.samwisekoi.com/pixelart/M.png)
Title: Re: [Closed] Stainless Steel Poker Plates - Boost Pay! 1 Blank left!
Post by: The_Beast on Fri, 29 March 2013, 18:34:35
Quote from: samwisekoi on Fri, 29 March 2013, 18:23:41
Quote from: The_Beast on Wed, 13 March 2013, 14:18:33
Blank - $25 - 1 Left
Show Image
(http://i.imgur.com/odnuI2Qh.png)


I will take the last one if it is still available.

 - Ron | samwisekoi
Show Image
(http://www.samwisekoi.com/pixelart/M.png)


You got it! I'll pack it with your other plate and invoice you when I get my invoice :P
Title: Re: [Closed] Stainless Steel Poker Plates - Boost Pay! 1 Blank left!
Post by: samwisekoi on Fri, 29 March 2013, 18:52:12
TYVM!

 - Ron | samwisekoi
Title: Re: [Closed - Order Sent] Stainless Steel Poker Plates - Invoicing Soon
Post by: tricheboars on Sat, 30 March 2013, 01:56:04
Quote from: The_Beast on Fri, 29 March 2013, 18:01:32
Quote from: tricheboars on Fri, 29 March 2013, 12:33:39
exciting stuff. no rush on my order beast. if others want their faster let 'em. i got this for the GH60 so... yea. super stoked about the plates and compatibility with Cherry and costar stabs. genius.

next project perhaps could be iso style?

I'll be doing my own GH60 plates. I don't know what layouts I want tho...


It's a bit more since I'm doing small orders, but then I know they're right (WFD's last plates didn't turn out all that great)

oh snap!  :p

i dont know what i want for the gh60 either. maybe iso or something interesting. i really like the poker layout and i think the function layer is great. i would swap ctrl and caps clock because caps lock sucks fat ****. i hate the caps lock, it should never have such good real estate. i need a full size backspace for sure and other than that i am flexible.
Title: Re: [Closed] Stainless Steel Poker Plates - Boost Pay! 1 Blank left!
Post by: Turkishrambo on Sat, 30 March 2013, 08:09:35
PAID!! XD
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Tue, 02 April 2013, 10:29:38
Sorry for not updating. Anyways, like I said, the laser guy had a death in the family. I thought I would have plates Monday, but it got pushed to Friday. Anyways, I had the test that Friday and met with family for Easter so that ate my weekend. I'll try to ship everything by this Friday. I should have CONUS by Thursday and International by Friday (I don't have any customs forms ATM)


Thanks for understanding :D
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Thu, 04 April 2013, 12:04:16
All domestic orders shipped 'cept jd, but he knows why


International will be tomorrow since I didn't have customs forms until just now. Thanks again guys :D
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Acetrak on Thu, 04 April 2013, 12:10:20
Where did your images of the plates go Beast?? :(
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Thu, 04 April 2013, 12:12:01
Quote from: Acetrak on Thu, 04 April 2013, 12:10:20
Where did your images of the plates go Beast?? :(

Cleaned up my imgur. Did you need them?
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Acetrak on Thu, 04 April 2013, 12:19:07
Doing some doodling in SW, wanted to make sure I will get the standoffs right...I'll hit you up later though :)
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: jdcarpe on Thu, 04 April 2013, 12:34:48
The screw holes in The_Beast's plate files are not centered to the standoffs. They work just fine in practice, because the holes are much larger then they need to be. But don't base your standoff positions on those holes. :)
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: badcop on Sat, 06 April 2013, 13:01:19
beast,

got my plates today.  everything looks good.

THANKS
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Tarzan on Sat, 06 April 2013, 13:16:00
Got my plates as well.  They look awesome.   :cool:

Thanks!
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: eyesmiles on Sat, 06 April 2013, 14:01:47
My plate came in today. Thank you beast!
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Gupgup on Sat, 06 April 2013, 16:08:16
Got mine! Thanks!


Gupgup
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: emusan on Sat, 06 April 2013, 16:26:46
Mine just came in :D thanks a bunch!! Now just to get that gh60 custom pcb >.>
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: tricheboars on Sat, 06 April 2013, 19:33:54
got mine today. looks good. has a slight bend to it but i will straighten it out somehow when the time comes.

thank you. would buy again.
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Sat, 06 April 2013, 19:38:22
Quote from: tricheboars on Sat, 06 April 2013, 19:33:54
got mine today. looks good. has a slight bend to it but i will straighten it out somehow when the time comes.

thank you. would buy again.

They all do. When they take the burrs off, the sanding machine adds a slight bend. 2 minutes and a table should be able to bend it straight again.
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Tarzan on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here.  And the case.  And the switches.  And the keycaps (okay, I probably have those...).

Basically everything.  This is the first Poker-related item I've owned.

 :))
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: do_Og@n on Sat, 06 April 2013, 21:06:37
Quote from: Greystoke on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here.  And the case.  And the switches.  And the keycaps (okay, I probably have those...).

Basically everything.  This is the first Poker-related item I've owned.

 :))

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: jdcarpe on Sat, 06 April 2013, 22:52:34
Quote from: do_Og@n on Sat, 06 April 2013, 21:06:37
Quote from: Greystoke on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here.  And the case.  And the switches.  And the keycaps (okay, I probably have those...).

Basically everything.  This is the first Poker-related item I've owned.

 :))

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]

How many are we talking?
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: do_Og@n on Sun, 07 April 2013, 00:28:59
Quote from: jdcarpe on Sat, 06 April 2013, 22:52:34
Quote from: do_Og@n on Sat, 06 April 2013, 21:06:37
Quote from: Greystoke on Sat, 06 April 2013, 20:18:51
Quote from: do_Og@n on Sat, 06 April 2013, 20:08:20
I received mine today....now I just need the pcb for one.

Same here.  And the case.  And the switches.  And the keycaps (okay, I probably have those...).

Basically everything.  This is the first Poker-related item I've owned.

 :))

I have some PCB mount MX Clears I am willing to trade for a PCB. [Now I cross my fingers]

How many are we talking?


I have over 300....but I am willing to trade around 40 for a Poker PCB.
Title: [Closed] Stainless Steel Poker Plates - None Left
Post by: turtle on Tue, 09 April 2013, 16:24:29
Thanks beast. Plate received.
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: The_Beast on Tue, 09 April 2013, 17:41:36
Quote from: turtle on Tue, 09 April 2013, 16:24:29
Thanks beast. Plate received.


NP


BTW, I shipped all international orders today. I would have shipped sooner but everyday I could have shipped was full with other stuff that needed doing. Sorry :(
Title: [Closed] Stainless Steel Poker Plates - None Left
Post by: duq on Tue, 09 April 2013, 18:41:50
Received! Thanks Beast!
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: esoomenona on Wed, 10 April 2013, 09:34:04
Received my plate as well. Thanks a lot, Beast.
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: eon on Tue, 16 April 2013, 04:37:46
Received mine too, thanks!

May I ask if plate mounted cherry stabs are compatible ? I have a few but I don't get how to plug them in the plate
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: eon on Tue, 16 April 2013, 04:41:21
Hmm nevermind I think I get it :)
Title: Re: [Closed] Stainless Steel Poker Plates - None Left
Post by: Neal on Tue, 16 April 2013, 09:38:43
Recieved, nice packaging.

Thanks!