OH YOU NINJA!
Ordered. :)
Black 84, if anyone is curious.
Ordered. :)
Black 84, if anyone is curious.OH YOU NINJA!
Almost got my post in before i3oilermaker could post his RESERVED post. :P
Is there any chance of getting the plate anodized the same color as the case (have them dipped at the same time)?
Does this case require a custom plate in order to work? I really don't want to desolder my Phantom if I can get one of these.
...Don't really want to start mixing plate colors..
What is the "chemfer"?
What is the "chemfer"?
did they mean chamfer?
What is the "chemfer"?
did they mean chamfer?
Has to be :p
Here you go Beast - http://en.wikipedia.org/wiki/Chamfer
I just have a few questions for this:
1) when is payment due? Just when we place order or later on hen GB finishes taking orders?
2) could shipping combined with others in my area save money or would it not be very efficient due to weight and size?
3) Finally, can the cases be engraved AFTER the anodising process? Or does that have to be done BEFORE?
I also want to say that this case looks fantastic. Good on you Boost for making his a reality. Looks damn fine :)
I just have a few questions for this:
1) when is payment due? Just when we place order or later on hen GB finishes taking orders?
2) could shipping combined with others in my area save money or would it not be very efficient due to weight and size?
3) Finally, can the cases be engraved AFTER the anodising process? Or does that have to be done BEFORE?
I also want to say that this case looks fantastic. Good on you Boost for making his a reality. Looks damn fine :)
Payment is due when the buy closes. Participants will have about a week to pay.
Boost was going to check if 2 cases could fit in a large flat rate box. Perhaps if there are more than 2 we can pursue other shipping options.
I will defer to boost on #3
Engraving is done before then anodized process.
Currently only going the ansi150 right now and will be making more plates for different layouts once I get more time.
Engraving is done before then anodized process.
Currently only going the ansi150 right now and will be making more plates for different layouts once I get more time.
Engraving is done before then anodized process.
Currently only going the ansi150 right now and will be making more plates for different layouts once I get more time.
Also, the plates provided with these should allow for switch swapping without desoldering right?
Engraving is done before then anodized process.
Currently only going the ansi150 right now and will be making more plates for different layouts once I get more time.
Also, the plates provided with these should allow for switch swapping without desoldering right?
Yes
Top Half $60
Bottom Half $150
Chamfer $15
Screws $5
TechKeys Order Fulfillment $10
Could I order just that? I can do all the other stuff myself
The included plate is designed for the Phantom, but future compatible plates will allow for other boards.
would it be possible to buy one case, but two plates?
Because I'd like to keep my options open to use it with the Phantom or my QFR which have different layouts.
I wonder how many orders this will actually get. My bet is on 20-25 :P
Dang...every other color is getting love except purple.
I wonder how many orders this will actually get. My bet is on 20-25 :P
Actually I'm worried we won't hit MOQ
Gold anodizing is only for plates, not cases.
UPDATE
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost. :D
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost. :D
In the OP it mentions to submit the form more than once. :D
UPDATE
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost. :D
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost. :D
Thank you. I will soon place my order.
One more question.
I might want to order 2 cases with different plates. If I can convince my friend to get one.
How would I do this? I can't see any way to do this using the form.
Another update
More plates created thanks to jd
Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkbAttaboy boost
Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkbAttaboy boost
Okay so now I have to update my order to select a plate. Resubmit?
Okay so now I have to update my order to select a plate. Resubmit?
Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkb
Is the cable hole just a straight hole or is there any kind of retention in there?
Also when will all the new plates and options be available in the form?
Why can't we anodize the case Gold?
If 4 ppl want gold it can be done
Gold color is in OP
Is the cable hole just a straight hole or is there any kind of retention in there?
Also when will all the new plates and options be available in the form?
They should be an option now.
Nope. Still no options for splitted shift/backspace and also case options and plate options still not separated, so when you want ANSI 150 you cannot choose if winkey or winkeyless case.
submitted a second order to replace my first
Can you add the Gold anodizing to the order form so I can submit my order?
Thanks
Can you please also add the extra layout options? (short shift, split backspace)
And make the top cover a separate choice? (winkey or with blockers)
Then I can submit my order ;)
Can you please also add the extra layout options? (short shift, split backspace)
And make the top cover a separate choice? (winkey or with blockers)
Then I can submit my order ;)
Got it - For everyone else please just PM updates to mesubmitted a second order to replace my first
Got it - For everyone else please just PM updates to mesubmitted a second order to replace my first
Cool beans.. Thanks
Another question... I assume by ANSI125 you mean the Phantom ANSI 125 92key? Will this have cutout space above the arrows for the additional 5 keys?
Thanks
Chris
Does this case have feet?
Any chance at all of half plates?
Thanks for the answer.Does this case have feet?
Yes, 4 rubber feet.
Do you guys have any pics of what the shade of purple you guys selected looks like when it's on metal?
Thanks to everyone making this happen!
@boost
do you have a picture of the full finished case (chamfered etc)?
Beast,
So those samples are on metal?
Thanks.
That being said, All the fuss I put up about Gold anodizing on the plates was for nothing. I ordered Purple today after seeing purple anodizing pic's.Show Image(http://geekhack.org/index.php?action=dlattach;topic=44588.0;attach=25437;image)
So what would happen if we could get the MOQ for anodising? Does that mean we just can't get it done it that color?
So what would happen if we could get the MOQ for anodising? Does that mean we just can't get it done it that color?
Right. So I suggest everyone switch to black anodizing. :P
July 7th is the now official deadline for this GB
July 7th is the now official deadline for this GB
So that puts payment from 8th to the 15th?
July 7th is the now official deadline for this GB
Boost can correct me if I'm wrong, but my understanding is the only MOQs are the anodized colors.
If the color you selected does not make 5, then at the end you must select a different color, or no anodized.
Just submitted my order for a black winkeyless case. I really wanted to go with purple but since the plate is being anodized gold, the purple and gold reminds me of my college's colors way to much.
I still really want an aluminum case in GH colors, black case and orange plate.
LSU?
Yeah, that sounds pretty awesome. Maybe you could get the plate re-anodized?
That color combination would be perfect for the Orange on Charcoal (https://www.originativeco.com/orange-charcoal) key cap set.
Thanks for pointing out the Orange on Charcoal set. I really want to get one, but still kind of leery of sherryton at the moment. Maybe in the future once he gets things moving more smoothly.
Can I order two plates to keep my layout options open?I'd still like to know if this was possible?
I picked up a set from him and had no issues.
Can I order two plates to keep my layout options open?I'd still like to know if this was possible?
boost? i3oiler?
Paid!
Is there a timeline for the production? ;)
Invoice to CNC shop paid
How are the plates coming along?
How are the plates coming along?
Plates will be ordered tomorrow (technically today)
Last I heard plates are on their way to me, and the cases are being prepped for anodizing
Last I heard plates are on their way to me, and the cases are being prepped for anodizing
So plates are completely done then?
Last I heard plates are on their way to me, and the cases are being prepped for anodizing
So plates are completely done then?
Plates are done and will be shipped to boost shortly.
If anyone changed their minds on one of these, I would be on it in a heartbeat. 84 key is highly preferred but I'm flexible.
I wish you luck, mate! Only 10 bought. I know, personally, I wouldn't ever sell mine. Just too awesome (from what I've seen, anyway :p )
I'll try to get a hold of boost - last I heard the plates were shipped and the cases would be done in Oct.
I hear you!
Keyboarding is all about patience, and I'm not too worried, but getting news updates is almost as addicting as getting tracking updates once it's shipped!
Anodizer is out about 7 to 10 days right now. I hope to get all the keyboards dropped off Friday or Monday, then will pack and ship them to you(boost) and the other guy(TechKeys) after I get them back.
Obviously, if they get them done sooner, I will get them to you sooner.
I would have had these done in the time projected, but some of the delays held up my end of things too.
yes, thanks for the update!
I've sent you a PM last week boost, could you maybe take some minutes and look at it? ;)
Sorry for my attendance in this thread just been busy with a ton of things. I sent an email to the shop this morning and this was the response.So just so I understand, the anodyzer is busy for the next 7-10 days and will start on this afterwords? or will the cases be ready about 7-10 days out (from now) ?Quote from: CNCSHOP link=topic= date=1381180101Anodizer is out about 7 to 10 days right now. I hope to get all the keyboards dropped off Friday or Monday, then will pack and ship them to you(boost) and the other guy(TechKeys) after I get them back.
Obviously, if they get them done sooner, I will get them to you sooner.
I would have had these done in the time projected, but some of the delays held up my end of things too.
Sorry for my attendance in this thread just been busy with a ton of things. I sent an email to the shop this morning and this was the response.So just so I understand, the anodyzer is busy for the next 7-10 days and will start on this afterwords? or will the cases be ready about 7-10 days out (from now) ?Quote from: CNCSHOP link=topic= date=1381180101Anodizer is out about 7 to 10 days right now. I hope to get all the keyboards dropped off Friday or Monday, then will pack and ship them to you(boost) and the other guy(TechKeys) after I get them back.
Obviously, if they get them done sooner, I will get them to you sooner.
I would have had these done in the time projected, but some of the delays held up my end of things too.
Sorry for my attendance in this thread just been busy with a ton of things. I sent an email to the shop this morning and this was the response.So just so I understand, the anodyzer is busy for the next 7-10 days and will start on this afterwords? or will the cases be ready about 7-10 days out (from now) ?Quote from: CNCSHOP link=topic= date=1381180101Anodizer is out about 7 to 10 days right now. I hope to get all the keyboards dropped off Friday or Monday, then will pack and ship them to you(boost) and the other guy(TechKeys) after I get them back.
Obviously, if they get them done sooner, I will get them to you sooner.
I would have had these done in the time projected, but some of the delays held up my end of things too.
Cases will be out of the anodize shop today or tomorrow :D...Shipping to Teck Keys after!
Thanks
Boost
Change of plans, I will be shipping these out. :D
Cases will be out of the anodize shop today or tomorrow :D...Shipping to Teck Keys after!
Thanks
Boost
Awesome news, thanks for the update!Change of plans, I will be shipping these out. :D
So what does this mean? Do they have to ship from TechKeys to you now? Then you will ship them out?
Cases will be out of the anodize shop today or tomorrow :D...Shipping to Teck Keys after!
Thanks
Boost
Awesome news, thanks for the update!Change of plans, I will be shipping these out. :D
So what does this mean? Do they have to ship from TechKeys to you now? Then you will ship them out?
nope, these will come directly from the CNC shop to me.
Show Image(http://img.tapatalk.com/d/13/10/30/ne8apu7e.jpg)Show Image(http://img.tapatalk.com/d/13/10/30/ja8eny5a.jpg)Show Image(http://img.tapatalk.com/d/13/10/30/qequ6epa.jpg)Show Image(http://img.tapatalk.com/d/13/10/30/umuqubyn.jpg)
Got the cases in today with will check/sort and snap pics tomorrow. Still got some work to finish.I'm so excited! I almost cannot wait!
Just saw the latest photos--the blue + gold is great: the royal colors.
Can't wait to see those pics! Originally wanted black but I thought red would be much nicer and go with my Klaxon set. Hoping I made the right choice!
Will pull them out the box tonight and post pics...Been swamped with work as I need to move the servers to another location. -_-
Same here. I'm 5 days into working 8 days in a row, and we are doing inventory, and my test install of radius isn't wanting to connect to anything but localhost. It's been terrible, so I share your pain.Will pull them out the box tonight and post pics...Been swamped with work as I need to move the servers to another location. -_-
Ahh awesome. Hope you get a chance for some relaxation time. I know I've been hectic with work lately and unless I get some gaming in or catch up on my tv shows stress is a major killer :mad:
ATTENTION!!!!
I made a mistake and ordered the wrong screws and will order the new ones. They should be here by the end of week. Sorry for this, really sorry for this.
thanksShow Image(http://img.tapatalk.com/d/13/11/19/yrezu6ud.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/a9agy3yj.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/yzu9ahar.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/e6aga4uq.jpg)
ATTENTION!!!!
I made a mistake and ordered the wrong screws and will order the new ones. They should be here by the end of week. Sorry for this, really sorry for this.
thanksShow Image(http://img.tapatalk.com/d/13/11/19/yrezu6ud.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/a9agy3yj.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/yzu9ahar.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/e6aga4uq.jpg)
What screws exactly were they? Just curious is all.
Also is that text lasered on to the back of the cases or over the image? I can't tell hahaha :p
Is that lasered text on all cases?
ATTENTION!!!!
I made a mistake and ordered the wrong screws and will order the new ones. They should be here by the end of week. Sorry for this, really sorry for this.
thanksShow Image(http://img.tapatalk.com/d/13/11/19/yrezu6ud.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/a9agy3yj.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/yzu9ahar.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/e6aga4uq.jpg)
What screws exactly were they? Just curious is all.
Also is that text lasered on to the back of the cases or over the image? I can't tell hahaha :p
It was lasered.
4-40 socket head screws. 7/16
I didn't think red was an option, but even the black is hawt!
Thanks very much for the pictures booost!
ATTENTION!!!!
I made a mistake and ordered the wrong screws and will order the new ones. They should be here by the end of week. Sorry for this, really sorry for this.
thanksShow Image(http://img.tapatalk.com/d/13/11/19/yrezu6ud.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/a9agy3yj.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/yzu9ahar.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/e6aga4uq.jpg)
What screws exactly were they? Just curious is all.
Also is that text lasered on to the back of the cases or over the image? I can't tell hahaha :p
It was lasered.
4-40 socket head screws. 7/16I didn't think red was an option, but even the black is hawt!
Thanks very much for the pictures booost!
Red wasn't really an option but I ended up paying the full cost for red as I was the only one wanting it.
And yeah, thanks very much for the photos boost! I'm guessing that you chucked an extra case in with the red batch and that ones (the back with the lasered text) is yours?
ATTENTION!!!!
I made a mistake and ordered the wrong screws and will order the new ones. They should be here by the end of week. Sorry for this, really sorry for this.
thanksShow Image(http://img.tapatalk.com/d/13/11/19/yrezu6ud.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/a9agy3yj.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/yzu9ahar.jpg)Show Image(http://img.tapatalk.com/d/13/11/19/e6aga4uq.jpg)
What screws exactly were they? Just curious is all.
Also is that text lasered on to the back of the cases or over the image? I can't tell hahaha :p
It was lasered.
4-40 socket head screws. 7/16I didn't think red was an option, but even the black is hawt!
Thanks very much for the pictures booost!
Red wasn't really an option but I ended up paying the full cost for red as I was the only one wanting it.
And yeah, thanks very much for the photos boost! I'm guessing that you chucked an extra case in with the red batch and that ones (the back with the lasered text) is yours?
Lol. IMO the raw finish is the best!
The screws are in and just did a test firmest on the proto and it's perfect. Going to start boxing this weekend and ship out on Monday. !
So are these on their ways now? ;)
I'd love to be able to build my Phantom until Christmas.
Mine is "out for delivery" ! Maybe I'll bike home and pick it up at lunch.
edit: picked it up from my old address. this case is beautiful. Puts my KMAC to shame. Pictures to come when I get home.
edit: took it apart: it's excellent. Teensy channel is great. overall beautiful.
I am, however, missing a rubber foot. What model is it so I can order a spare?
edit: typing on it now. I went with 62g whites and a stock white for the spacebar (needs to be heavy to hold up the titanium spacebar I put on it. Of all my kb's this deserves it the most. It's excellent!
I have all cherry stabs except for spacebar where I went costar 'cause I have exactly zero cherry stabilizer wires that length.
Some things to note:
screws are non-metric. Closest for case is 2.5mm hex (little big) and closest for internal is T10 (little small) I'll likely replace these with metric ones eventually.
Case comes to a nice point (angle). I really love the back side of the keyboard. You'll know when you see it. This is begging for cherry profile.
You will have to use in'switch LEDs for capslock and scrolllock. I don't have either installed and don't need 'em!
The only real "gripe" I have is to keep the case bolts the same size, the rear ones have really deep holes and I couldn't get them to work well with my screwdriver. I had to pull an allen wrench set out of my bike bag to get them in/out. still, it looks excellent.
The machining is really really good on this. Made in the USA and very high quality! OTD wishes they had this.
The top plate is very thin and light, wasn't really expecting that.
The teensy cutout channel in the inside of the bottom case and the cablerouting are both really good.
Things I need to fix on mine:
one keyswitch (4) isn't fully seated, need to hit it with the iron real quick.
gotta come up with a worthy keymap (hint: dvorak/qwerty)
need to find a fourth bumpon and install those
Put cherry keycaps on it instead of tai-hao
Sorry I was MIA the last few days, all but 2 orders went out as I'm waiting for more screws.
Bim and wraul, your order will go out this week.
Thanks
also, did you need to add some type of padding under your PCB?Well, I will be doing this most likely, but I have a ton of high quality wool felt left over from a failed model F mat replacement experiment, so I plan to use that.
also, did you need to add some type of padding under your PCB?Well, I will be doing this most likely, but I have a ton of high quality wool felt left over from a failed model F mat replacement experiment, so I plan to use that.
Pictures!
album: http://imgur.com/a/kHUEfShow Image(http://i.imgur.com/aEXGvsZh.jpg)Show Image(http://i.imgur.com/HPx5lIbh.jpg)Show Image(http://i.imgur.com/ViitenJh.jpg)Show Image(http://i.imgur.com/YdtobSUh.jpg)Show Image(http://i.imgur.com/MQOXpj2h.jpg)
I'll put some keycap / plate shots up when I replace the tai-hao with cherry :p
typing on it now. I went with 62g whites and a stock white for the spacebar (needs to be heavy to hold up the titanium spacebar I put on it. Of all my kb's this deserves it the most. It's excellent!
MX whites, yeh?
Sorry I was MIA the last few days, all but 2 orders went out as I'm waiting for more screws.
Bim and wraul, your order will go out this week.
Thanks
Please post some more cool pictures!Recommend me a good image host and I will. I'm out of space on my imgur. I took lots more pictures.
Please post some more cool pictures!Recommend me a good image host and I will. I'm out of space on my imgur. I took lots more pictures.
Has anyone else built theirs? I've typed and gamed on it. White light switches are fantastic and sound great in the case.
It's very hard to pick up without the feet on it, as it wants to "stick" on the table from air friction. Cymbals have the same issue.
I'll try to take a pic of mine tonight.
I have a few nitpicks for a $300 case, but all and all super awesome job boost.
I'll try to take a pic of mine tonight.
I have a few nitpicks for a $300 case, but all and all super awesome job boost.
Do tell, I like to hear feedback good and bad.
Thanks
I'll try to take a pic of mine tonight.
I have a few nitpicks for a $300 case, but all and all super awesome job boost.
Do tell, I like to hear feedback good and bad.
Thanks
Hard to describe without pictures, but in a nutshell my nitpicks are the cutouts of the upper half have some imperfections in the corners, the case doesn't feel totally sandblasted smooth, and I thought there would be more beveling on the edges, they are pretty sharp!
Everything else about it is just stunning.
Nixdof?