Any examples of what you can do? Or a list?
http://www.ebay.com/usr/listokei123 Are you exactly this seller on ebay?
http://www.ebay.com/usr/listokei123 Are you exactly this seller on ebay?
Am I missing something? Why is this so cheap?
Am I missing something? Why is this so cheap?
It's acrylic not aluminum.
Listokei
Under tuning what does this mean?
- Inserts Coil tap
Am I missing something? Why is this so cheap?
It's acrylic not aluminum.
Listokei
Under tuning what does this mean?
- Inserts Coil tap
Hi,
Please check this http://listokei.gomdesign.com/KMAC_Blue/_DSC3065.jpg (http://listokei.gomdesign.com/KMAC_Blue/_DSC3065.jpg)
You can see Coil tap.
Use this Coil tap, Screws are firmly tightened.
And better than Tapping directly into the acrylic, is more robust.
Thank you ;)
http://www.ebay.com/usr/listokei123 Are you exactly this seller on ebay?
Yes, in the thread ray linked I mentioned it and he talks about the fake bid winner on one of his listings.
http://www.ebay.com/usr/listokei123 Are you exactly this seller on ebay?
Yes, in the thread ray linked I mentioned it and he talks about the fake bid winner on one of his listings.
Hi,
It does not matter with eBay.
I wanna start selling in GH.
Thank you ;)
I did not mean anything harmful with that statement. Was just clarifying that is your ebay account :)http://www.ebay.com/usr/listokei123 Are you exactly this seller on ebay?
Yes, in the thread ray linked I mentioned it and he talks about the fake bid winner on one of his listings.
Hi,
It does not matter with eBay.
I wanna start selling in GH.
Thank you ;)
Any winkeyless keyboard? I may take one.
What kind of boards can we expect from you in the future.
I'm looking for something in purple.
Is it time for the Sifo Sky Blue Edition?Damn, sifo getting a 3rd k custom? Have you even typed on your GON yet or are you still waiting for keycaps.
I will consider.
How do you compare typing on Acrylic Housings to Alu?
Is it time for the Sifo Sky Blue Edition?Damn, sifo getting a 3rd k custom? Have you even typed on your GON yet or are you still waiting for keycaps.
I will consider.
How do you compare typing on Acrylic Housings to Alu?
Is it time for the Sifo Sky Blue Edition?Damn, sifo getting a 3rd k custom? Have you even typed on your GON yet or are you still waiting for keycaps.
I will consider.
How do you compare typing on Acrylic Housings to Alu?
Waiting for keycaps.
I'm typing on it right now with some thick pbts and a weird space bar :D
No only to build I don't use keyboards
Is it time for the Sifo Sky Blue Edition?
I will consider.
How do you compare typing on Acrylic Housings to Alu?
Sold.
;)
What kind of boards can we expect from you in the future.
I'm looking for something in purple.
Hi,
I can assembly KMAC, KMAC Happy, Duck mini, PS2AVR, a87, mx-mini, and all of in Korea PCB.
Thank you :D :D
What kind of boards can we expect from you in the future.
I'm looking for something in purple.
Hi,
I can assembly KMAC, KMAC Happy, Duck mini, PS2AVR, a87, mx-mini, and all of in Korea PCB.
Thank you :D :D
Awesome, I look forward to see what you end up selling in the future :)
Prices increasing slowly.. GLWB guys.
Am I missing something? Why is this so cheap?
It is extremely nice. ;)
The new boards look awesome!
GLWS!
Am I missing something? Why is this so cheap?
Thanks for the heads up. Now he raised prices. :))
Am I missing something? Why is this so cheap?
Thanks for the heads up. Now he raised prices. :))
Idk which way to take his statement. The emoticon kinda makes me want to think hes like "thanks a lot, now he raised the prices! :p" but it could also be the way everyone is taking it. But definitely different materials change the cost of boards.Am I missing something? Why is this so cheap?
Thanks for the heads up. Now he raised prices. :))
Perhaps you missed there are different keyboards in the OP now? The original that was listed sold.
Am I missing something? Why is this so cheap?
Thanks for the heads up. Now he raised prices. :))
(Attachment Link)
Hi,
Is not a raised prices. :eek:
My price be caused by The time required to assemble (Lubrication, sticker, LED, Soldering, Etc.)
And Material prices (PCB, housing, Etc.)
And EMS shipping cost & PayPal fee.
Thank you ;)
Still, $620 is very steep for a 60% keyboard. I've done some napkin calculations of material costs + shipping + PayPal fee, and you're still making over $100 in profit for labor and "tuning" (which requires cheap materials, so it's just another word for "labor").
I included hat into my estimate (say $85 max for that 60% set). Anyway, I've put in my bit, not here to argue ;)
I included hat into my estimate (say $85 max for that 60% set). Anyway, I've put in my bit, not here to argue ;)
He quoted me at $499 probably not including shipping when he first came here. Calculation wise you need to cater to exactly what was put in.
Let's say we start from the beginning:
kbdmod.com sells KMAC happy kit 380,000W
$340+Shipping($12)
$352 for the kit, not including anything other than PCB,Plate,Case
-
Switches: $50 for good measure
Stickers+Lube: $8 being cheap
Springs:$10
Have you ever stickered and lubed 50+ switches in one sitting? it honestly is a tasking job on my mental state, it will take at least 2 hours to do it "perfectly"
-
$58+8+10
-
$76
$352+$76=$428
Let's not forget assembly of soldering and such a common rate on this forum is lets say $40 minus back and forth shipping?
x+30=$458
So yeah you are essentially paying him $40 in profit to have an assembled board, are you really going to chastise him for $40, especially since he even went out of his way to get a vendor badge which denotes "for profit" selling on this forum ;p.
But yeah, I'm not saying its right or wrong, just that I usually calculate before buying :P
Good luck Listokei, your acrylic work is really good, do you make casings for Filco?
I included hat into my estimate (say $85 max for that 60% set). Anyway, I've put in my bit, not here to argue ;)
He quoted me at $499 probably not including shipping when he first came here. Calculation wise you need to cater to exactly what was put in.
Let's say we start from the beginning:
kbdmod.com sells KMAC happy kit 380,000W
$340+Shipping($12)
$352 for the kit, not including anything other than PCB,Plate,Case
-
Switches: $50 for good measure
Stickers+Lube: $8 being cheap
Springs:$10
Have you ever stickered and lubed 50+ switches in one sitting? it honestly is a tasking job on my mental state, it will take at least 2 hours to do it "perfectly"
-
$58+8+10
-
$76
$352+$76=$428
Let's not forget assembly of soldering and such a common rate on this forum is lets say $40 minus back and forth shipping?
x+30=$458
So yeah you are essentially paying him $40 in profit to have an assembled board, are you really going to chastise him for $40, especially since he even went out of his way to get a vendor badge which denotes "for profit" selling on this forum ;p.
But yeah, I'm not saying its right or wrong, just that I usually calculate before buying :P
Good luck Listokei, your acrylic work is really good, do you make casings for Filco?
You wasn't calculed led, resisters, soldering fee, stabilizer and paypal fee. Sticker + lubed was 8$ ------------> very cheap.
That was close to my calculation, Meiosis. I had under $500 for parts + shipping + fees. Hence >$100 profit.
(Yes, I've stickered and lubed and replaced springs in over 2 TKL boards' worth of switches. And one of them was an o-ring Jailhouse Blues mod, where every blue stem had to have a piece of silicone o-ring go in just so.)
Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with :thumb:Agreed. Was a pleasure to do business with him, really recommend him.
Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with :thumb:
Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with :thumb:Agreed. Was a pleasure to do business with him, really recommend him.
Very nice :)
Do you take custom orders?
For anyone who's on the fence about one of these, I figured I would put in my support for these boards.
I have a kingsaver made by listokei (this one, though this is his picture: http://listokei.gomdesign.com/king/_DSC3034.jpg), and I have no complaints about it. The build quality is solid, there's no flex anywhere, and the colors are as nice as the pictures make them seem. The lubing etc. of the switches seems fine (they are smooth, though I do not know how smooth they are stock).
It's not as heavy as a metal keyboard (it's even lighter than very light Al keyboards e.g. the cheat), but it comes in many more (and much brighter) colors!
willl join the auction
Duck 410$!
Very good price, if I didn't have a KMAC2, I might just buy this.
Details please check this link ;D
http://goo.gl/YyQfM1
Price is $370 $299
(Included PayPal fee, Worldwide EMS Shipping cost)
Thank you :D :D
I would assume Browns/Reds/Clears sell the best. It seems that not many people like blue or black.
DUCK $500Damn. well there went my sneaky bid
duck $600
Today!
Update LZ-HX!! :thumb: :thumb:
Thank you ;) ;)
Today!very nice item listokei, this is comparable with duck v1 and 356mini!
Update LZ-HX!! :thumb: :thumb:
Thank you ;) ;)
GLWS.
Today!very nice item listokei, this is comparable with duck v1 and 356mini!
Update LZ-HX!! :thumb: :thumb:
Thank you ;) ;)
Is that thing an authentic LifeZone board? I ask because it looks like the LZ engraving on it doesn't look like his other boards. It just seems to be a copy of the 356mini.
Is that thing an authentic LifeZone board? I ask because it looks like the LZ engraving on it doesn't look like his other boards. It just seems to be a copy of the 356mini.
Is that thing an authentic LifeZone board? I ask because it looks like the LZ engraving on it doesn't look like his other boards. It just seems to be a copy of the 356mini.
Wow that is like 1.5 keyboards. What is the layout of the bottom row?
LZ HX 625
LZ HX 625
Wow 00:00:00!!!!!!
Action Finish!
Thank you!!! :thumb: :thumb: :thumb:
LZ HX 625
Wow 00:00:00!!!!!!
Action Finish!
Thank you!!! :thumb: :thumb: :thumb:
:D
_____q is good sniper :))
Got my custom order in the mail today--it was even better than I expected. ListoKei's work is fantastic, shipping is fast, and service excellent! :D
I can haz pictures?
I can haz pictures?
But of course! Still waiting on some caps.MoreShow Image(http://i.imgur.com/GhWuA5R.jpg)MoreShow Image(http://i.imgur.com/p8nOl9f.jpg)MoreShow Image(http://i.imgur.com/Al8I2Ox.jpg)
wow 456 gt, curious to see how high the price will go.Are you going to bid?
GLWS
wow 456 gt, curious to see how high the price will go.Are you going to bid?
GLWS
why am I tempted =.=
why am I tempted =.=Dual 456 incoming :p
why am I tempted =.=
why am I tempted =.=
Because your other 456 is calling for a mate. ;) ;) Go ahead, do her a favor.
k,why am I tempted =.=
Because your other 456 is calling for a mate. ;) ;) Go ahead, do her a favor.
QUICK EVERYONE HOLD ME BACK
why am I tempted =.=
Because your other 456 is calling for a mate. ;) ;) Go ahead, do her a favor.
QUICK EVERYONE HOLD ME BACK
why am I tempted =.=
Because your other 456 is calling for a mate. ;) ;) Go ahead, do her a favor.
QUICK EVERYONE HOLD ME BACK
listo where are mx minis?!
456GT $660.
Well, $660 is the starting price.456GT $660.
What's this , " Go high or stay home?" !
456GT $660.
What's this , " Go high or stay home?" !
456GT $705
No, thank you!456GT $705
Thank you :thumb: :thumb:
Great price for a 456.Thank you, good sir!
Nice sniping, GeeGee
Good buy. Listo's keyboards look amazing. :)
Ooooo....that sky blue with greys would be amazing. To bad I'm short on cash right now.
GLWS listkei!!!
Aww man what happened to the list in the OP with all the previous sales? That was really helpful and I kept stopping by occasionally to drool at the pictures.
The a87 looks great, love the pink panel you put on the back.
GLWS
I wish there was a red/white one..
Wang Saver $400
Oooweee a salmon alps Wangsaver....very awesome. Nice get moogle!
Man this is some nice stuff in here. Wish I didn't have to pay for my wife's grad degree...
Would it be possible to get a board without switches and LEDs?
Can you do a PS2AVR thumb in Pure layout with an aluminium case?