geekhack

geekhack Marketplace => Interest Checks => Topic started by: pexon on Thu, 15 August 2013, 04:25:04

Title: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Thu, 15 August 2013, 04:25:04: I can get some Poker 2 boards in soon, just need to gauge interest and what type of switches.

I may also be able to get in some CNC cases in 60% flavour.
Title: Re: [IC] Poker 2
Post by: pr1me on Thu, 15 August 2013, 04:52:31: interested in cnc case :)
Title: Re: [IC] Poker 2
Post by: Latin00032 on Thu, 15 August 2013, 05:00:38: Quote from: pexon on Thu, 15 August 2013, 04:25:04
I can get some Poker 2 boards in soon, just need to gauge interest and what type of switches.

I may also be able to get in some CNC cases in 60% flavour.

Where are you getting the CNC cases from? What kind of cases are they?
Title: Re: [IC] Poker 2
Post by: vorn on Thu, 15 August 2013, 05:08:53: +1 on the CNC cases. Will be following this thread for more details :)
Title: Re: [IC] Poker 2
Post by: pexon on Thu, 15 August 2013, 05:56:03: CNC cases are from Vortex, I have some pics, but I am holding off on showing them yet. They look VERY good I must say.
Title: Re: [IC] Poker 2
Post by: vorn on Thu, 15 August 2013, 07:13:59: Then colour me VERY interested :)
Title: Re: [IC] Poker 2
Post by: pexon on Thu, 15 August 2013, 07:27:23: OK cool man. I will tease some photos later
Title: Re: [IC] Poker 2
Post by: vorn on Thu, 15 August 2013, 07:41:29: Quote from: pexon on Thu, 15 August 2013, 07:27:23
OK cool man. I will tease some photos later

:P

One question that I'm dying to ask, and I hope this isn't too premature, but are these CNC cases going to be "low-profile" like those aluminium Pure CNC cases a while back? I really loved the low sides that went just a tiny bit higher than the actual PCB.
Title: Re: [IC] Poker 2 and CNC 60% Cases
Post by: pexon on Fri, 16 August 2013, 03:10:24: http://imgur.com/a/dwmxx (http://imgur.com/a/dwmxx)

http://imgur.com/a/agUMr (http://imgur.com/a/agUMr)
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: PointyFox on Fri, 16 August 2013, 03:15:24: Vintage MX Black Poker IIs. :))
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 03:19:02: Quote from: PointyFox on Fri, 16 August 2013, 03:15:24
Vintage MX Black Poker IIs. :))

TOP LEL :))
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: vorn on Fri, 16 August 2013, 03:29:27: I'm in!!!! ;D Any hint as to what these would cost?
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 03:31:45: No pricing as yet, my new contact is much faster at responding to emails however. He just old me to register my interest if I would like the cases and pricing will be work out.
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: Sent on Fri, 16 August 2013, 04:05:38: Quote from: PointyFox on Fri, 16 August 2013, 03:15:24
Vintage MX Black Poker IIs. :))

This.
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: osxoep on Fri, 16 August 2013, 10:34:30: Dem cases.
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 10:45:34: Quote from: osxoep on Fri, 16 August 2013, 10:34:30
Dem cases.

They look cool right! 8)
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: SpAmRaY on Fri, 16 August 2013, 10:51:43: Quote from: pexon on Fri, 16 August 2013, 10:45:34
Quote from: osxoep on Fri, 16 August 2013, 10:34:30
Dem cases.

They look cool right! 8)

yes, yes they do!
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 10:58:50: Not as good as that beard though man :-*
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: fydo on Fri, 16 August 2013, 11:05:53: Looks great! I'm interested, depending on price.
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 11:10:24: Its always a factor dude, as I said, the new contact seems to be much more 'on the ball.'
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: HendyZone on Fri, 16 August 2013, 11:12:48: I'm in for this CNC case :p
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: Dubsgalore on Fri, 16 August 2013, 12:36:46: oooo pexon bud i wanna see where this goes
Title: Re: [IC] Poker 2 and CNC 60% Cases (Now with Pics!)
Post by: pexon on Fri, 16 August 2013, 14:23:39: 1st price in. The 'metal' case in black only is 50USD
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: kenmai9 on Fri, 16 August 2013, 14:27:49: 50 USD!!??! my brain just sploded
i'm in for sure then lol

is that price for the poker 2 or cnc case?
or are they the same
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 14:32:04: Thats for one of the simple cases, just trying to find out what 'metal' it is. But for 50 bucks, its a bargain IMO.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 14:43:41: Quote from: pexon on Fri, 16 August 2013, 14:32:04
Thats for one of the simple cases, just trying to find out what 'metal' it is. But for 50 bucks, its a bargain IMO.

but how much will shipping be?? hopefully it won't get banged up too much. I want one!!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 14:50:11: Well, I can ship with DHL for under 20GBP. That is fully insured and tracked, 1-3 days.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: wiredPANDA on Fri, 16 August 2013, 14:50:18: I had just ran across tinlong's post on DT for these CNC cases. He stated they were ALU in his post, but we'll see.

And count me in. I'd love to see one of these cases with a plate-mounted board for comparison.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 14:51:12: (http://i.imgur.com/Ph0GSPP.jpg)

(http://i.imgur.com/0SW8MlI.jpg)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 14:53:34: Quote from: pexon on Fri, 16 August 2013, 14:50:11
Well, I can ship with DHL for under 20GBP. That is fully insured and tracked, 1-3 days.

$30 for shipping on a $50 case :eek:.......booooo :P
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 14:54:59: I dont know the price yet mate. I am just speculating. Perhaps we could get a proxy for US.

I can look up DHL prices, I get discount. Remember thats super fast, tracked and insured shipping. Royal Mail could probably do it cheaper, but frankly, they are crap.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 14:56:21: Quote from: pexon on Fri, 16 August 2013, 14:54:59
I dont know the price yet mate. I am just speculating. Perhaps we could get a proxy for US.

I can look up DHL prices, I get discount. Remember thats super fast, tracked and insured shipping. Royal Mail could probably do it cheaper, but frankly, they are crap.

No worries I'm just messing with ya!!

And tinlong has these listed at $102 on DT :p

maybe they are not all the same??

the black looks not as tall....I like that. :thumb:
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 15:02:46: I am pretty sure they are the same, check the pics
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Acanthophis on Fri, 16 August 2013, 15:08:52: Ehm, the ones with the thick front wall are indeed $102. The same (cases) as pexon's cases.
The cheap 'metal' (read: metal scrap) black one is as pexon listed: $50
And in my personal opinion it also looks like that. It looks very cheap.

I like the 'regular' cases, though. Especially the fat front lip.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: GeorgeStorm on Fri, 16 August 2013, 15:18:03: Will they fit the original poker?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: kenmai9 on Fri, 16 August 2013, 15:19:50: $102 isn't bad for that lipped case.. it looks low profile too which is nice.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Dubsgalore on Fri, 16 August 2013, 15:20:06: Quote from: GeorgeStorm on Fri, 16 August 2013, 15:18:03
Will they fit the original poker?

yep
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 15:23:34: They will fit the Poker and Pure.

I didn't say they were the best quality cases, they may be made with left over materials, but they are 50 USD, its very competitive price.

I can also get the >100 USD cases no issues.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: MTManiac on Fri, 16 August 2013, 15:36:05: Quote from: SpAmRaY on Fri, 16 August 2013, 14:53:34
Quote from: pexon on Fri, 16 August 2013, 14:50:11
Well, I can ship with DHL for under 20GBP. That is fully insured and tracked, 1-3 days.

$30 for shipping on a $50 case :eek:.......booooo :P

I bet he could get you cheaper shipping w/o tracking
DHL shipping is always expensive :-[
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 15:38:37: Quote from: MTManiac on Fri, 16 August 2013, 15:36:05
Quote from: SpAmRaY on Fri, 16 August 2013, 14:53:34
Quote from: pexon on Fri, 16 August 2013, 14:50:11
Well, I can ship with DHL for under 20GBP. That is fully insured and tracked, 1-3 days.

$30 for shipping on a $50 case :o .......booooo :p

I bet he could get you cheaper shipping w/o tracking
DHL shipping is always expensive :-[

Will call them on monday to get some pricing :D

DHL are very good couriers though.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 15:40:18: Quote from: Acanthophis on Fri, 16 August 2013, 15:08:52
Ehm, the ones with the thick front wall are indeed $102. The same (cases) as pexon's cases.
The cheap 'metal' (read: metal scrap) black one is as pexon listed: $50
And in my personal opinion it also looks like that. It looks very cheap.

I like the 'regular' cases, though. Especially the fat front lip.

Ok, I figured as much , they are different.

But I'll take a $50 scrap metal case over a $30 plastic one!!! ;)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: fydo on Fri, 16 August 2013, 15:40:32: I have a quick question about those low-profile CNC cases ... (forgive me if it's a stupid question)

Will they look silly if you're using one with a plate? i.e. will the plate be higher than the top of the case?

Thanks for your time.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 15:41:33: Quote from: SpAmRaY on Fri, 16 August 2013, 15:40:18
Quote from: Acanthophis on Fri, 16 August 2013, 15:08:52
Ehm, the ones with the thick front wall are indeed $102. The same (cases) as pexon's cases.
The cheap 'metal' (read: metal scrap) black one is as pexon listed: $50
And in my personal opinion it also looks like that. It looks very cheap.

I like the 'regular' cases, though. Especially the fat front lip.

Ok, I figured as much , they are different.

But I'll take a $50 scrap metal case over a $30 plastic one!!! ;)

Exactly my thoughts. Honestly, a metal case will be much tougher, better to type on and much less flex than plastic.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Fri, 16 August 2013, 16:15:26: EDIT: I'd be interested but I'm not sure about the height yet, as someone asked earlier, I'll be using a plate and everything, seeing as this case is very low profile and flat wont that type weird? looks like the keys in the pictures are tilted backwards
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 16:22:55: Will see if I can get a pic of it with a board and plate installed.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Fri, 16 August 2013, 16:48:50: Quote from: SpAmRaY on Fri, 16 August 2013, 14:53:34
Quote from: pexon on Fri, 16 August 2013, 14:50:11
Well, I can ship with DHL for under 20GBP. That is fully insured and tracked, 1-3 days.

$30 for shipping on a $50 case :eek:.......booooo :P

u guess somebody could proxy them in the US.

I do want one.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Photoelectric on Fri, 16 August 2013, 16:56:17: I am very interested if cheaper shipping can be somehow organized. My next keyboard is going to be a Poker II with a full-LED mod.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 16:57:23: Quote from: Photoelectric on Fri, 16 August 2013, 16:56:17
I am very interested if cheaper shipping can be somehow organized. My next keyboard is going to be a Poker II with a full-LED mod.

You could always paint the stock case ;)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Photoelectric on Fri, 16 August 2013, 16:59:45: I totally misread that as poker II going for $50 :( Lack of sleep!!!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Fri, 16 August 2013, 17:02:16: Quote from: Photoelectric on Fri, 16 August 2013, 16:59:45
I totally misread that as poker II going for $50 :( Lack of sleep!!!

doh! it's ok.....blame the paint fumes..... :thumb:
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Photoelectric on Fri, 16 August 2013, 17:20:37: That's a safe assumption as well!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Neal on Fri, 16 August 2013, 18:27:51: What are these cases made of? I heard someone say it isn't aluminium?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 16 August 2013, 18:50:48: Looks like Aluminium, not sure yet though.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: codyeatworld on Fri, 16 August 2013, 18:57:19: I'd be in for one or two!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: 4814 on Fri, 16 August 2013, 19:01:24: Interested! But I really want to see it with a plate, too ;)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Rafen on Fri, 16 August 2013, 19:43:17: I would be very interested if I could get one of the blue ones.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Cottonsox on Fri, 16 August 2013, 19:56:53: Interested, will be keeping an eye on this!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: oneproduct on Sat, 17 August 2013, 00:04:58: Assuming the $50 cases are the same as the fat front lipped ones in terms of height, there's already one picture of them with a plate in the albums he linked:

(http://i.imgur.com/VZA31tD.jpg)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: LechnerDE on Sat, 17 August 2013, 03:08:03: If it's really that cheap, I'll probably fall for a blue one although I don't need it at all :D
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: JonasDK on Sat, 17 August 2013, 05:24:12: Definitely interested!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Sat, 17 August 2013, 06:02:41: Nothing back yet, will most likely be monday now.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: JonasDK on Sat, 17 August 2013, 07:04:45: Excited, can't wait!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Sat, 17 August 2013, 07:47:39: I see that these cases are really flat, doesnt that type weirdly when your keys are tilted backwards?
I mean, I always used those feet on every keyboard ever so the keys are sloping down towards me.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pr1me on Sun, 18 August 2013, 09:46:05: Quick question: This will be a group buy or for sale on PexonPcs ?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Sun, 18 August 2013, 09:49:44: Quote from: pr1me on Sun, 18 August 2013, 09:46:05
Quick question: This will be a group buy or for sale on PexonPcs ?

I believe this will just be sold through pexon.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: fydo on Sun, 18 August 2013, 10:11:12: Quote from: Qipz on Sat, 17 August 2013, 07:47:39
I see that these cases are really flat, doesnt that type weirdly when your keys are tilted backwards?
I mean, I always used those feet on every keyboard ever so the keys are sloping down towards me.
In the pictures, it appears there are circular indentations on the bottom of the CNC case. If they're not already included I'd imagine one could just get some rubber feet and stick them on.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Sun, 18 August 2013, 12:05:41: Quote from: pr1me on Sun, 18 August 2013, 09:46:05
Quick question: This will be a group buy or for sale on PexonPcs ?

Not sure yet, but the price will be the same regardless.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Dubsgalore on Sun, 18 August 2013, 13:46:06: pexon bro, i think ill be in for one when they go up
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Sun, 18 August 2013, 14:57:14: OK man, thanks for letting me know. Seems as though there is a good amount of interest. I will see if I can sort something out to get the ball rolling this week.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pix3l_fodder on Sun, 18 August 2013, 16:04:30: +1 for a cheap case
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Sun, 18 August 2013, 17:21:51: i am in for 2.

will there be a choice for the color or only black?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: electrogeek007 on Mon, 19 August 2013, 02:53:04: These are GH60-compatible, correct? If so, in for one of these, definitely the blue one if it was made available. :thumb:
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 19 August 2013, 04:01:45: Quote from: gnubag on Sun, 18 August 2013, 17:21:51
i am in for 2.

will there be a choice for the color or only black?

For the cheap one, its black only I believe.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Mon, 19 August 2013, 04:20:45: you linked 2 imgur links, isd there
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Mon, 19 August 2013, 04:21:55: those 2 imgur links, which one is which? also, the cheap one will work with the gh60 right?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 19 August 2013, 04:28:06: Quote from: Qipz on Mon, 19 August 2013, 04:20:45
you linked 2 imgur links, isd there

These are the cheaper ones... The imgur links are the more expensive ones.

(http://i.imgur.com/Ph0GSPP.jpg)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Mon, 19 August 2013, 05:11:05: what makes them so cheap?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 19 August 2013, 05:21:23: Perhaps they are from offcuts and they are just using up spare material? The quality should be fine, a metal case will always better than stock anyway!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Mon, 19 August 2013, 05:33:51: Ofcourse! and I'm very interested in this one, as for the feet, does it come with some feet or will it just rest on its back?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Mon, 19 August 2013, 08:45:50: Quote from: pexon on Mon, 19 August 2013, 04:28:06
Quote from: Qipz on Mon, 19 August 2013, 04:20:45
you linked 2 imgur links, isd there

These are the cheaper ones... The imgur links are the more expensive ones.

Show Image
(http://i.imgur.com/Ph0GSPP.jpg)

so long as it fits I think that would be just fine!!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 19 August 2013, 09:27:51: OK cool. Well I am frantically finishing orders this week, need to get them all out before Thursday as I have LAN over the weekend. Hopefully I will know more by then and I can get a GB rocking sometime next week.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: LechnerDE on Mon, 19 August 2013, 09:29:01: Quote from: pexon on Mon, 19 August 2013, 09:27:51
OK cool. Well I am frantically finishing orders this week, need to get them all out before Thursday as I have LAN over the weekend. Hopefully I will know more by then and I can get a GB rocking sometime next week.

Sounds good :)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: vorn on Mon, 19 August 2013, 09:49:14: I'm definitely keen on one of the new lipped cases!!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: AtL on Tue, 20 August 2013, 10:07:28: I would go for one case and a custom usb cable to save money from shipping.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Tue, 20 August 2013, 11:35:50: Quote from: AtL on Tue, 20 August 2013, 10:07:28
I would go for one case and a custom usb cable to save money from shipping.

that's actually a fantastic idea, I'll get the same
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Tue, 20 August 2013, 18:10:14: I'm going to be running a special offer when I get these in, along with the Poker 2. You can buy the poker and cable or all 3 (case too) for a discount ;)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: vorn on Wed, 21 August 2013, 00:46:16: Quote from: pexon on Tue, 20 August 2013, 18:10:14
I'm going to be running a special offer when I get these in, along with the Poker 2. You can buy the poker and cable or all 3 (case too) for a discount ;)

Nice!!!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: LechnerDE on Wed, 21 August 2013, 01:13:52: Quote from: pexon on Tue, 20 August 2013, 18:10:14
I'm going to be running a special offer when I get these in, along with the Poker 2. You can buy the poker and cable or all 3 (case too) for a discount ;)

You know how to make my wallet bleed :D
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SeriouSSpotS on Wed, 21 August 2013, 04:18:01: Quote from: pexon on Thu, 15 August 2013, 04:25:04
I can get some Poker 2 boards in soon, just need to gauge interest and what type of switches.

I may also be able to get in some CNC cases in 60% flavour.

I would like a cnc case :))
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: mashby on Wed, 21 August 2013, 09:09:24: It would appear that these cases are being made by/for Tex.

(http://farm8.staticflickr.com/7316/9560713016_156808d273_z.jpg) (http://www.flickr.com/photos/jewu8210/9560713016/)
grey-case-02 (http://www.flickr.com/photos/jewu8210/9560713016/) by 反光鏡的視野 (http://www.flickr.com/people/jewu8210/), on Flickr

More here (http://www.flickr.com/photos/jewu8210/sets/72157635167421018/)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Wed, 21 August 2013, 09:11:26: Show Image
Quote from: mashby on Wed, 21 August 2013, 09:09:24
It would appear that these cases are being made by/for Tex.

(http://farm8.staticflickr.com/7316/9560713016_156808d273_z.jpg) (http://www.flickr.com/photos/jewu8210/9560713016/)
grey-case-02 (http://www.flickr.com/photos/jewu8210/9560713016/) by 反光鏡的視野 (http://www.flickr.com/people/jewu8210/), on Flickr

More here (http://www.flickr.com/photos/jewu8210/sets/72157635167421018/)

This is interesting considering the recent comments about something else coming from tex 'soon'.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: tricheboars on Wed, 21 August 2013, 10:25:23: i have the iMav low profile vortex case on my plated poker. the case and plate come together perfect, almost flush. it's straight money tanks awesome.

my case looks just like the ones pictured except it is just aluminum and silver.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Wed, 21 August 2013, 11:02:15: Quote from: SpAmRaY on Wed, 21 August 2013, 09:11:26
This is interesting considering the recent comments about something else coming from tex 'soon'.

care to explain further?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: vorn on Wed, 21 August 2013, 11:14:21: Well Tex just released photos of this exact CNC case on their Facebook page. Speculation over :)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Wed, 21 August 2013, 13:19:57: Quote from: Qipz on Wed, 21 August 2013, 11:02:15
Quote from: SpAmRaY on Wed, 21 August 2013, 09:11:26
This is interesting considering the recent comments about something else coming from tex 'soon'.

care to explain further?

Quote from: justin.wu on Sun, 18 August 2013, 10:59:16
Maybe 1 month , We will show new keyboard to you guys :)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Dubsgalore on Wed, 21 August 2013, 23:53:38: can we get any colors other then black? would rather a red or grey for my poker

Show Image
Quote from: mashby on Wed, 21 August 2013, 09:09:24
It would appear that these cases are being made by/for Tex.

(http://farm8.staticflickr.com/7316/9560713016_156808d273_z.jpg) (http://www.flickr.com/photos/jewu8210/9560713016/)
grey-case-02 (http://www.flickr.com/photos/jewu8210/9560713016/) by 反光鏡的視野 (http://www.flickr.com/people/jewu8210/), on Flickr

More here (http://www.flickr.com/photos/jewu8210/sets/72157635167421018/)

i think they are slightly different, look at the bottom side, seems to be fatter on the TEX one
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: whiskytango on Thu, 22 August 2013, 11:22:01: With a little more info, obviously, I would be in for at least 2 of the simple black $50 cases, assuming you figure out how to ship US for less than an astronomical figure :)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: JonasDK on Thu, 22 August 2013, 14:16:36: Any news on this?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pichu23 on Fri, 23 August 2013, 00:09:23: I'd like to ask if it would fit all 60% ? Poker II for example ? :D
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Fri, 23 August 2013, 00:13:39: Quote from: pichu23 on Fri, 23 August 2013, 00:09:23
I'd like to ask if it would fit all 60% ? Poker II for example ? :D

have you seen the title?

Quote
[IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD

also I don't think that the poker 2 is a 60% keyboard.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pichu23 on Fri, 23 August 2013, 01:59:37: Quote from: gnubag on Fri, 23 August 2013, 00:13:39
Quote from: pichu23 on Fri, 23 August 2013, 00:09:23
I'd like to ask if it would fit all 60% ? Poker II for example ? :D

have you seen the title?

Quote
[IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD

also I don't think that the poker 2 is a 60% keyboard.
dun hef to be med bro. just asking as he was selling poker II as well.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Fri, 23 August 2013, 02:41:18: Quote from: pichu23 on Fri, 23 August 2013, 01:59:37
Quote from: gnubag on Fri, 23 August 2013, 00:13:39
Quote from: pichu23 on Fri, 23 August 2013, 00:09:23
I'd like to ask if it would fit all 60% ? Poker II for example ? :D

have you seen the title?

Quote
[IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD

also I don't think that the poker 2 is a 60% keyboard.
dun hef to be med bro. just asking as he was selling poker II as well.

why would he sell a case with a keyboard and cable when the case is not compatible?

also there are a lot of pictures with pokers in cases in this thread. l0lthinkabitplz
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pichu23 on Fri, 23 August 2013, 02:51:38: Quote from: gnubag on Fri, 23 August 2013, 02:41:18
Quote from: pichu23 on Fri, 23 August 2013, 01:59:37
Quote from: gnubag on Fri, 23 August 2013, 00:13:39
Quote from: pichu23 on Fri, 23 August 2013, 00:09:23
I'd like to ask if it would fit all 60% ? Poker II for example ? :D

have you seen the title?

Quote
[IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD

also I don't think that the poker 2 is a 60% keyboard.
dun hef to be med bro. just asking as he was selling poker II as well.

why would he sell a case with a keyboard and cable when the case is not compatible?

also there are a lot of pictures with pokers in cases in this thread. l0lthinkabitplz

Dude, I'm here to ask a question since I'm not sure about it. I don't need your "l0lwhatsoever". Pexon sorry to crap thread but people like him is the reason of a bad community. Nuff said.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 23 August 2013, 03:44:17: Who gave you the impression they wont fit? There are photos around this forum and in the IMGUR link of the case inside a Poker 2.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pichu23 on Fri, 23 August 2013, 03:46:04: Quote from: pexon on Fri, 23 August 2013, 03:44:17
Who gave you the impression they wont fit? There are photos around this forum and in the IMGUR link of the case inside a Poker 2.

Good to know it fits, will be waiting for your sale thread. Thanks. :)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 23 August 2013, 03:52:12: Well, I was led to believe the pics are of Poker 2. The email from my new contact said they fit Poker 2....
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Qipz on Fri, 23 August 2013, 03:54:10: Say pexon, you said there will be a special offer for these, does that include the poker II or can I get a special offer on the case + cable

also, does the case include those feet like these
(http://farm4.staticflickr.com/3694/9560729110_d743535cd4_o.jpg)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Fri, 23 August 2013, 04:10:11: I can right angles, yes
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Obakemono on Sun, 25 August 2013, 19:22:30: I'm interested in one of these cases too! :)

You will ship them from UK right?? I assume that it would be cheaper to sell it to Spain than those 20 GBP?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 26 August 2013, 07:42:12: Shipping to Spain even with DHL should be a fair bit cheaper.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: LechnerDE on Mon, 26 August 2013, 08:04:51: So what is the status of this?

Will the GB go up soon?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 26 August 2013, 08:24:52: Fingers crossed soon mate yea.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: LechnerDE on Mon, 26 August 2013, 08:29:29: Quote from: pexon on Mon, 26 August 2013, 08:24:52
Fingers crossed soon mate yea.

Woohoooo! Looking forward to your bundle offers :thumb:
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SeriouSSpotS on Mon, 26 August 2013, 09:22:13: Quote from: pexon on Mon, 26 August 2013, 08:24:52
Fingers crossed soon mate yea.

Can't wait
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: ApocalypseMaow on Mon, 26 August 2013, 13:32:05: This is a really awesome deal!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 26 August 2013, 13:36:55: Order form will be going up the next coming days fingers crossed.

I cant get my hands on the Pokers until the end of September, but rest assured, if you want one and a case/ cable, I can offer you a discount code ;)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Photoelectric on Mon, 26 August 2013, 13:40:47: Any more details on other options? Or is only the black colored case going to be available?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Mon, 26 August 2013, 13:48:28: Quote from: Photoelectric on Mon, 26 August 2013, 13:40:47
Any more details on other options? Or is only the black colored case going to be available?

More options will more than likely be available at a later date.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Cottonsox on Tue, 27 August 2013, 09:28:49: At the same price?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Tue, 27 August 2013, 13:21:15: Unsure as of yet.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Jrwestcoast on Tue, 27 August 2013, 21:39:25: Can't wait to get one. Patiently waiting for the order form to go up.
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: Obakemono on Wed, 28 August 2013, 15:26:59: BTW any remotely clue on how much more could cost a colored version?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: kenmai9 on Tue, 10 September 2013, 22:57:05: are you still going to do the CNC cases?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Tue, 10 September 2013, 23:07:07: Quote from: kenmai9 on Tue, 10 September 2013, 22:57:05
are you still going to do the CNC cases?

cnc are over here:

http://geekhack.org/index.php?topic=47376.0
(not by pexon)
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: kenmai9 on Tue, 10 September 2013, 23:08:28: Quote from: gnubag on Tue, 10 September 2013, 23:07:07
Quote from: kenmai9 on Tue, 10 September 2013, 22:57:05
are you still going to do the CNC cases?

cnc are over here:

http://geekhack.org/index.php?topic=47376.0
(not by pexon)

Oh okay thank you for that!
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Wed, 11 September 2013, 02:23:15: Quote from: Jrwestcoast on Tue, 27 August 2013, 21:39:25
Can't wait to get one. Patiently waiting for the order form to go up.

Look at the op dude
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: sth on Wed, 11 September 2013, 19:58:13: OP doesnt have any info in it right now...
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: SpAmRaY on Wed, 11 September 2013, 20:14:35: Quote from: sth on Wed, 11 September 2013, 19:58:13
OP doesnt have any info in it right now...

try this OP

http://geekhack.org/index.php?topic=47776.0
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: acer589 on Wed, 02 October 2013, 22:08:43: Got pics?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: gnubag on Wed, 02 October 2013, 22:58:00: Quote from: acer589 on Wed, 02 October 2013, 22:08:43
Got pics?

http://geekhack.org/index.php?topic=47776.0

do people actually read through the OP or at least the last page of the thread?
Title: Re: [IC] Poker 2 and CNC 60% Cases . Simple black case 50 USD
Post by: pexon on Thu, 03 October 2013, 04:41:49: Quote from: gnubag on Wed, 02 October 2013, 22:58:00
Quote from: acer589 on Wed, 02 October 2013, 22:08:43
Got pics?

http://geekhack.org/index.php?topic=47776.0 (http://geekhack.org/index.php?topic=47776.0)

do people actually read through the OP or at least the last page of the thread?

Evidently not