geekhack

geekhack Projects => Making Stuff Together! => Topic started by: bueller on Sat, 17 August 2013, 00:28:15

Title: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sat, 17 August 2013, 00:28:15: Will do a more detailed write up on the steps I took to get to this stage but I'm not 100% finished yet so I'll just start with some pictures!

Still need to get some caps on her as well but I have a tiny bit of soldering left and I'm also waiting on a 7U space bar + 1.5x mods to arrive.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: Flamingchook on Sat, 17 August 2013, 00:55:43: Nice work! I love the layout. What controller is that?
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: JPG on Sat, 17 August 2013, 01:07:30: Very nice job!
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sat, 17 August 2013, 01:07:58: Quote from: Flamingchook on Sat, 17 August 2013, 00:55:43
Nice work! I love the layout. What controller is that?

http://www.mattairtech.com/index.php/development-boards/atmega32u4-usb-development-board-arduino-compatible.html

Bought it so I could wire a USB port directly to the controller but it's a little bit too large to be worth it really.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sat, 17 August 2013, 01:53:13: Looks like I may need to resolder the micro-controller or I have completely fubared it and will need to replace. The = key just keeps repeating again and again even after desoldering that entire column :(

Got a Teensy breakout coming from Melvang so I may just go with a Teensy 2.0 to save the hassles.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: domoaligato on Sat, 17 August 2013, 01:58:10: are you sure that maybe you don't have something fubar'd in the firmware? I ran across this with hasu's firmware because I messed up my layout.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sat, 17 August 2013, 02:24:20: Quote from: domoaligato on Sat, 17 August 2013, 01:58:10
are you sure that maybe you don't have something fubar'd in the firmware? I ran across this with hasu's firmware because I messed up my layout.

That's not a bad idea, might resolder the 2 columns I've pulled off and take another look at the firmware.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: SpAmRaY on Sat, 17 August 2013, 08:01:45: I like it! Keyboard science in action.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: UniClown on Sat, 17 August 2013, 19:20:49: This is truly great! I've sort of been following your project from a distance because I plan on making my own 65% board at some point in the future. That wiring is pretty insane and must have taken a lot of work. Congrats on getting this far. I bet you're super excited to finally put some caps on dat. :thumb:

Edit: also, what is your function layer configuration? You already gave me this as your layout (http://ne0.cc/laygen/#Esc%3A%3A1%20%201%3A%3A1%20%202%3A%3A1%20%203%3A%3A1%20%204%3A%3A1%20%205%3A%3A1%20%206%3A%3A1%20%207%3A%3A1%20%208%3A%3A1%20%209%3A%3A1%20%200%3A%3A1%20%20-_%3A%3A1%20%20+%3D%3A%3A1%20%20Backspace%3A%3A2%20%20Prt%3A%3A1%24%24%20%0ATab%3A%3A1.5%20%20Q%3A%3A1%20%20W%3A%3A1%20%20E%3A%3A1%20%20R%3A%3A1%20%20T%3A%3A1%20%20Y%3A%3A1%20%20U%3A%3A1%20%20I%3A%3A1%20%20O%3A%3A1%20%20P%3A%3A1%20%20%5B%7B%3A%3A1%20%20%5D%7D%3A%3A1%20%20%5C%7C%3A%3A1.5%20%20Del%3A%3A1%24%24%0ACtrl%3A%3A1.75%20%20A%3A%3A1%20%20S%3A%3A1%20%20D%3A%3A1%20%20F%3A%3A1%20%20G%3A%3A1%20%20H%3A%3A1%20%20J%3A%3A1%20%20K%3A%3A1%20%20L%3A%3A1%20%20%3B%3A%20%3A%3A1%20%20%27%22%3A%3A1%20%20Enter%3A%3A2.25%20%20+%3A%3A1%24%24%0AShift%3A%3A2.25%20%20Z%3A%3A1%20%20X%3A%3A1%20%20C%3A%3A1%20%20V%3A%3A1%20%20B%3A%3A1%20%20N%3A%3A1%20%20M%3A%3A1%20%20%3C%2C%3A%3A1%20%20%3E.%3A%3A1%20%20/%3F%3A%3A1%20%20Shift%3A%3A1.75%20%20%5E%3A%3A1%20%20Fn%3A%3A1%24%24%0AWin%3A%3A1.5%20%20Alt%3A%3A1.5%20%20Space%3A%3A7%20%20Caps%3A%3A1.5%20%20Fn%3A%3A1.5%20%20%3C%3A%3A1%20%20V%3A%3A1%20%20%3E%3A%3A1%24%24%20%0A).
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sat, 17 August 2013, 22:10:25: Quote from: UniClown on Sat, 17 August 2013, 19:20:49
This is truly great! I've sort of been following your project from a distance because I plan on making my own 65% board at some point in the future. That wiring is pretty insane and must have taken a lot of work. Congrats on getting this far. I bet you're super excited to finally put some caps on dat. :thumb:

Edit: also, what is your function layer configuration? You already gave me this as your layout (http://ne0.cc/laygen/#Esc%3A%3A1%20%201%3A%3A1%20%202%3A%3A1%20%203%3A%3A1%20%204%3A%3A1%20%205%3A%3A1%20%206%3A%3A1%20%207%3A%3A1%20%208%3A%3A1%20%209%3A%3A1%20%200%3A%3A1%20%20-_%3A%3A1%20%20+%3D%3A%3A1%20%20Backspace%3A%3A2%20%20Prt%3A%3A1%24%24%20%0ATab%3A%3A1.5%20%20Q%3A%3A1%20%20W%3A%3A1%20%20E%3A%3A1%20%20R%3A%3A1%20%20T%3A%3A1%20%20Y%3A%3A1%20%20U%3A%3A1%20%20I%3A%3A1%20%20O%3A%3A1%20%20P%3A%3A1%20%20%5B%7B%3A%3A1%20%20%5D%7D%3A%3A1%20%20%5C%7C%3A%3A1.5%20%20Del%3A%3A1%24%24%0ACtrl%3A%3A1.75%20%20A%3A%3A1%20%20S%3A%3A1%20%20D%3A%3A1%20%20F%3A%3A1%20%20G%3A%3A1%20%20H%3A%3A1%20%20J%3A%3A1%20%20K%3A%3A1%20%20L%3A%3A1%20%20%3B%3A%20%3A%3A1%20%20%27%22%3A%3A1%20%20Enter%3A%3A2.25%20%20+%3A%3A1%24%24%0AShift%3A%3A2.25%20%20Z%3A%3A1%20%20X%3A%3A1%20%20C%3A%3A1%20%20V%3A%3A1%20%20B%3A%3A1%20%20N%3A%3A1%20%20M%3A%3A1%20%20%3C%2C%3A%3A1%20%20%3E.%3A%3A1%20%20/%3F%3A%3A1%20%20Shift%3A%3A1.75%20%20%5E%3A%3A1%20%20Fn%3A%3A1%24%24%0AWin%3A%3A1.5%20%20Alt%3A%3A1.5%20%20Space%3A%3A7%20%20Caps%3A%3A1.5%20%20Fn%3A%3A1.5%20%20%3C%3A%3A1%20%20V%3A%3A1%20%20%3E%3A%3A1%24%24%20%0A).

Yep that's my layout! Definitely took me a long time to get the wiring done, next board is going to have a PCB I think as I don't want to go through that again. Just need to speak with samwisekoi and see if there is anything I can do to push the GH65-75 project moving :)

Can't wait to get some caps on it, just waiting on a CCnG set :)
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: UniClown on Sun, 18 August 2013, 11:01:08: Quote from: bueller on Sat, 17 August 2013, 22:10:25
Quote from: UniClown on Sat, 17 August 2013, 19:20:49
This is truly great! I've sort of been following your project from a distance because I plan on making my own 65% board at some point in the future. That wiring is pretty insane and must have taken a lot of work. Congrats on getting this far. I bet you're super excited to finally put some caps on dat. :thumb:

Edit: also, what is your function layer configuration? You already gave me this as your layout (http://ne0.cc/laygen/#Esc%3A%3A1%20%201%3A%3A1%20%202%3A%3A1%20%203%3A%3A1%20%204%3A%3A1%20%205%3A%3A1%20%206%3A%3A1%20%207%3A%3A1%20%208%3A%3A1%20%209%3A%3A1%20%200%3A%3A1%20%20-_%3A%3A1%20%20+%3D%3A%3A1%20%20Backspace%3A%3A2%20%20Prt%3A%3A1%24%24%20%0ATab%3A%3A1.5%20%20Q%3A%3A1%20%20W%3A%3A1%20%20E%3A%3A1%20%20R%3A%3A1%20%20T%3A%3A1%20%20Y%3A%3A1%20%20U%3A%3A1%20%20I%3A%3A1%20%20O%3A%3A1%20%20P%3A%3A1%20%20%5B%7B%3A%3A1%20%20%5D%7D%3A%3A1%20%20%5C%7C%3A%3A1.5%20%20Del%3A%3A1%24%24%0ACtrl%3A%3A1.75%20%20A%3A%3A1%20%20S%3A%3A1%20%20D%3A%3A1%20%20F%3A%3A1%20%20G%3A%3A1%20%20H%3A%3A1%20%20J%3A%3A1%20%20K%3A%3A1%20%20L%3A%3A1%20%20%3B%3A%20%3A%3A1%20%20%27%22%3A%3A1%20%20Enter%3A%3A2.25%20%20+%3A%3A1%24%24%0AShift%3A%3A2.25%20%20Z%3A%3A1%20%20X%3A%3A1%20%20C%3A%3A1%20%20V%3A%3A1%20%20B%3A%3A1%20%20N%3A%3A1%20%20M%3A%3A1%20%20%3C%2C%3A%3A1%20%20%3E.%3A%3A1%20%20/%3F%3A%3A1%20%20Shift%3A%3A1.75%20%20%5E%3A%3A1%20%20Fn%3A%3A1%24%24%0AWin%3A%3A1.5%20%20Alt%3A%3A1.5%20%20Space%3A%3A7%20%20Caps%3A%3A1.5%20%20Fn%3A%3A1.5%20%20%3C%3A%3A1%20%20V%3A%3A1%20%20%3E%3A%3A1%24%24%20%0A).

Yep that's my layout! Definitely took me a long time to get the wiring done, next board is going to have a PCB I think as I don't want to go through that again. Just need to speak with samwisekoi and see if there is anything I can do to push the GH65-75 project moving :)

Can't wait to get some caps on it, just waiting on a CCnG set :)

Yeah, I'd probably wait for that project to finish because the PCB is top-notch. I think you misunderstood my question. I know your layout. However, I am curious as to what your function layer is aka what do your keys do when you hold down function key.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: JPG on Sun, 18 August 2013, 11:25:51: Hey, I am considering getting a similar case done, but I have no experience with any cnc machine. How much did it cost to make a case like that and what kind of file is required?
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: bueller on Sun, 18 August 2013, 12:15:15: Quote from: UniClown on Sun, 18 August 2013, 11:01:08
Quote from: bueller on Sat, 17 August 2013, 22:10:25
Quote from: UniClown on Sat, 17 August 2013, 19:20:49
This is truly great! I've sort of been following your project from a distance because I plan on making my own 65% board at some point in the future. That wiring is pretty insane and must have taken a lot of work. Congrats on getting this far. I bet you're super excited to finally put some caps on dat. :thumb:

Edit: also, what is your function layer configuration? You already gave me this as your layout (http://ne0.cc/laygen/#Esc%3A%3A1%20%201%3A%3A1%20%202%3A%3A1%20%203%3A%3A1%20%204%3A%3A1%20%205%3A%3A1%20%206%3A%3A1%20%207%3A%3A1%20%208%3A%3A1%20%209%3A%3A1%20%200%3A%3A1%20%20-_%3A%3A1%20%20+%3D%3A%3A1%20%20Backspace%3A%3A2%20%20Prt%3A%3A1%24%24%20%0ATab%3A%3A1.5%20%20Q%3A%3A1%20%20W%3A%3A1%20%20E%3A%3A1%20%20R%3A%3A1%20%20T%3A%3A1%20%20Y%3A%3A1%20%20U%3A%3A1%20%20I%3A%3A1%20%20O%3A%3A1%20%20P%3A%3A1%20%20%5B%7B%3A%3A1%20%20%5D%7D%3A%3A1%20%20%5C%7C%3A%3A1.5%20%20Del%3A%3A1%24%24%0ACtrl%3A%3A1.75%20%20A%3A%3A1%20%20S%3A%3A1%20%20D%3A%3A1%20%20F%3A%3A1%20%20G%3A%3A1%20%20H%3A%3A1%20%20J%3A%3A1%20%20K%3A%3A1%20%20L%3A%3A1%20%20%3B%3A%20%3A%3A1%20%20%27%22%3A%3A1%20%20Enter%3A%3A2.25%20%20+%3A%3A1%24%24%0AShift%3A%3A2.25%20%20Z%3A%3A1%20%20X%3A%3A1%20%20C%3A%3A1%20%20V%3A%3A1%20%20B%3A%3A1%20%20N%3A%3A1%20%20M%3A%3A1%20%20%3C%2C%3A%3A1%20%20%3E.%3A%3A1%20%20/%3F%3A%3A1%20%20Shift%3A%3A1.75%20%20%5E%3A%3A1%20%20Fn%3A%3A1%24%24%0AWin%3A%3A1.5%20%20Alt%3A%3A1.5%20%20Space%3A%3A7%20%20Caps%3A%3A1.5%20%20Fn%3A%3A1.5%20%20%3C%3A%3A1%20%20V%3A%3A1%20%20%3E%3A%3A1%24%24%20%0A).

Yep that's my layout! Definitely took me a long time to get the wiring done, next board is going to have a PCB I think as I don't want to go through that again. Just need to speak with samwisekoi and see if there is anything I can do to push the GH65-75 project moving :)

Can't wait to get some caps on it, just waiting on a CCnG set :)

Yeah, I'd probably wait for that project to finish because the PCB is top-notch. I think you misunderstood my question. I know your layout. However, I am curious as to what your function layer is aka what do your keys do when you hold down function key.

Ah of course, my function layer is pretty simple really. The numeric keys are all F1-F12 and the arrows are pgup/dn and home/end.

Quote from: JPG on Sun, 18 August 2013, 11:25:51
Hey, I am considering getting a similar case done, but I have no experience with any cnc machine. How much did it cost to make a case like that and what kind of file is required?

The cost for all the material and cutting was $66 and all you need is a CAD file. I'll try and post mine up in the next couple of days.
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: HoffmanMyster on Tue, 20 August 2013, 14:08:19: Looking great so far! Love the progress you've made. :D
Title: Re: Bueller's 66-key Custom (inspired by Matt3o)
Post by: rurushu on Fri, 23 August 2013, 14:47:35: wow... this thing must weigh quite alot... considering so many pieces of raw metal wedged together!