geekhack

geekhack Marketplace => Classifieds => Topic started by: ComradeSniper on Sat, 31 August 2013, 01:46:34

Title: ComradeSniper's Thread
Post by: ComradeSniper on Sat, 31 August 2013, 01:46:34

Sold most stuff, going to close this thread and re open a new one for the sake of neatness.

Title: Re: WTB KPAD or maybe HHKB, WTS Fujitsu Peerless board and a TKL plate
Post by: jdcarpe on Wed, 04 September 2013, 18:55:21

Hmmm...

But you don't have anything comparable to trade?

Title: Re: WTB KPAD or maybe HHKB, WTS Fujitsu Peerless board and a TKL plate
Post by: ComradeSniper on Wed, 04 September 2013, 19:31:07

Quote from: jdcarpe on Wed, 04 September 2013, 18:55:21

Hmmm...

But you don't have anything comparable to trade?

I'm afraid not  :-[

Title: Re: ComradeSniper's Thread UPDATED 10-10
Post by: ComradeSniper on Thu, 10 October 2013, 23:38:20

Cleaned up the thread and added a new board to the OP. Also, it just occurred to me that two keyboards should fit fine in a flat rate game board box so if you buy one keyboard then any other keyboard is $15 off.

Title: Re: ComradeSniper's Thread UPDATED 10-10
Post by: ComradeSniper on Fri, 11 October 2013, 22:30:57

Bump

Title: Re: ComradeSniper's Thread UPDATED 10-12 WTS Poker
Post by: ComradeSniper on Sat, 12 October 2013, 20:51:33

Added Poker X w/ reds and Vintage MX blues.

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX, Raindrop set
Post by: ComradeSniper on Sun, 13 October 2013, 13:20:48

Please excuse the early bump; added more things.

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX
Post by: ComradeSniper on Sun, 13 October 2013, 14:32:23

Raindrop set is sold!

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX
Post by: Amble on Sun, 13 October 2013, 14:51:27

Welcome to the dark side that is Topre.  :)

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX
Post by: absyrd on Sun, 13 October 2013, 15:01:25

Hmmm... my kb7000 (which yours definitely is) is a little beat up. Perhaps I should make an offer...

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX
Post by: ComradeSniper on Sun, 13 October 2013, 16:34:51

Quote from: absyrd on Sun, 13 October 2013, 15:01:25

Hmmm... my kb7000 (which yours definitely is) is a little beat up. Perhaps I should make an offer...

You should!  :p

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX
Post by: ComradeSniper on Sun, 13 October 2013, 21:59:32

Poker is sold!

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX, WTT HO CC
Post by: ComradeSniper on Mon, 14 October 2013, 21:15:56

Bump

Title: Re: ComradeSniper's Thread UPDATED 10-13 Selling all my MX, WTT HO MX CC for Topre
Post by: ComradeSniper on Tue, 15 October 2013, 23:05:11

Bump

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTT HO MX CC for Topre
Post by: ComradeSniper on Wed, 16 October 2013, 19:59:57

Added some novelty caps.

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTT HO MX CC for Topre
Post by: jonathanyu on Wed, 16 October 2013, 20:13:41

Pm'd

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTT HO MX CC for Topre
Post by: saturnotaku on Wed, 16 October 2013, 20:17:16

PM sent for some of said novelty caps.

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTT HO MX CC for Topre
Post by: do_Og@n on Wed, 16 October 2013, 23:19:40

That's a good price on that Filco...tempted.

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTT HO MX CC for Topre
Post by: zenuty on Wed, 16 October 2013, 23:30:35

Pm'd

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX
Post by: ComradeSniper on Thu, 17 October 2013, 00:07:34

Hack Orange MX clack traded, and some of the novelty keycaps as well as the Filco sold. OP updated accordingly.

Title: Re: ComradeSniper's Thread UPDATED 10-16 Selling all my MX, WTB Realforce 23u/ub
Post by: ComradeSniper on Sat, 19 October 2013, 19:58:45

Bump.

Title: Re: ComradeSniper's Thread UPDATED 10-23 WTB Realforce 23u/ub, WTS Chicony KB-7000
Post by: ComradeSniper on Wed, 23 October 2013, 17:56:52

Price lowered on Vintage Blues, title updated in a shameless attempt to attract attention.

Title: Re: ComradeSniper's Thread UPDATED 10-23 WTB Realforce 23u/ub, WTS Chicony KB-7000
Post by: ComradeSniper on Thu, 24 October 2013, 17:23:40

Bump

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: ComradeSniper on Fri, 25 October 2013, 16:37:21

Added GH60 plate and costar stab set.

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: ComradeSniper on Sat, 26 October 2013, 20:05:02

ttt

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: ComradeSniper on Tue, 29 October 2013, 17:53:08

bump

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: ComradeSniper on Fri, 01 November 2013, 12:11:15

Bump

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: gh_pp on Fri, 01 November 2013, 12:40:10

Quote from: ComradeSniper on Sat, 31 August 2013, 01:46:34

Would like to sell this Fujitsu FKB-4725 with Peerless switch (spring over rubber dome). Model M keycaps fit on it, but its keycaps do not fit on the Model M. Seems to function perfectly. This one has an AT connector. Really interesting board, but I can't stand the feel of the switches so I know this is only going to sit in my closet and gather dust.


I'd like $25 shipped for this one.

Just curious. What method do you use to ship this keyboard and how much would that cost? It's huge and heavy.

Thanks

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: whiskytango on Fri, 01 November 2013, 12:50:13

Already dumping the vintage blues?

If it helps, I can comment on their provenance: jdcarpe desoldered them from a Dolch and traded them to me. I never used them and traded them to ComradeSniper.

GLWS! Good guy to deal with

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS GH60 Plate/stabs
Post by: ComradeSniper on Fri, 01 November 2013, 13:25:18

Quote from: whiskytango on Fri, 01 November 2013, 12:50:13

Already dumping the vintage blues?

If it helps, I can comment on their provenance: jdcarpe desoldered them from a Dolch and traded them to me. I never used them and traded them to ComradeSniper.

GLWS! Good guy to deal with

I really like them, but Topre blew every MX switch I've tried out of the water. It was a tough decision but I ultimately decided to fully convert to Topre.

Quote from: gh_pp on Fri, 01 November 2013, 12:40:10

Quote from: ComradeSniper on Sat, 31 August 2013, 01:46:34

Would like to sell this Fujitsu FKB-4725 with Peerless switch (spring over rubber dome). Model M keycaps fit on it, but its keycaps do not fit on the Model M. Seems to function perfectly. This one has an AT connector. Really interesting board, but I can't stand the feel of the switches so I know this is only going to sit in my closet and gather dust.


I'd like $25 shipped for this one.

Just curious. What method do you use to ship this keyboard and how much would that cost? It's huge and heavy.

Thanks

I ship keyboards via USPS Priority large flat rate game board box. It runs about $15 if you print the label online. Shipping is already included in the price on my listing.

Title: Re: ComradeSniper's Thread UPDATED 10-25 WTB Realforce 23u/ub, WTS Vintage Boards
Post by: ComradeSniper on Mon, 04 November 2013, 21:31:25

GH60 stuff sold. Added a price for the ergo alps board based off of what Binge is asking for his.

Title: Re: ComradeSniper's Thread UPDATED 11-6 WTT Drunken Skull Topre for other Topre CC
Post by: ComradeSniper on Thu, 07 November 2013, 22:38:53

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-6
Post by: ComradeSniper on Thu, 14 November 2013, 23:06:44

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-6
Post by: ComradeSniper on Sat, 16 November 2013, 12:35:27

Would really like to get this stuff moving, feel free to send me offers.

Title: Re: ComradeSniper's Thread UPDATED 11-25 Price Drop
Post by: ComradeSniper on Mon, 25 November 2013, 01:39:33

Price dropped on Chicony ergo kb and vintage blues.

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Sat, 30 November 2013, 14:41:05

Bump, new things.

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Sun, 01 December 2013, 14:20:47

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Mon, 02 December 2013, 21:23:17

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Wed, 04 December 2013, 14:25:37

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Thu, 05 December 2013, 17:09:11

Bump

Title: Re: ComradeSniper's Thread UPDATED 11-30 two more vintage boards
Post by: ComradeSniper on Sun, 08 December 2013, 14:49:23

Bump

Title: Re: ComradeSniper's Thread
Post by: ComradeSniper on Fri, 20 December 2013, 16:11:12

Bump

Title: Re: ComradeSniper's Thread
Post by: crunch on Sat, 21 December 2013, 14:02:15

Hello!
What would it cost to ship the NMB keyboard to Sweden.

Title: Re: ComradeSniper's Thread
Post by: ComradeSniper on Sat, 21 December 2013, 14:29:38

Quote from: crunch on Sat, 21 December 2013, 14:02:15

Hello!
What would it cost to ship the NMB keyboard to Sweden.

The lowest price I can calculate is about $60 :-X

Title: Re: ComradeSniper's Thread
Post by: crunch on Sat, 21 December 2013, 15:02:54

Ouch that was expensive. :eek: