geekhack
geekhack Marketplace => Classifieds => Topic started by: Winther on Thu, 05 September 2013, 22:03:02
-
Hey guys
I have been looking forward to the GH60 for quite some time, but lately I have been thinking that I dont know if I want to spend that much on a keyboard I dont need and probably wont use,
I also kinda really need the money atm, so I have decided that I want to sell my order:
2x PCB's (SMD soldering done)
2x ISO 1.25x plate
2x Cherry PLATE mount stabilizers kits with a 6.25 spacebar wire.
65x MX Green
no assembly service
And just to make this clear, the GH60 order CANNOT be split up, that is not a matter of me not wanting it, its just not possible! (of course you can team up with a buddy and split it that way, just as long as there is only one shipping address and one payment to me.)
I also have this alu tray, bought from tinlong117 for 125$, this is also the minimum price and does not include shipping to you.
I also have some MX clear switched coming from 7Bit, they will bed sent to the GH60 distributor, if anyone is interested I can try and get them sent to the buyer also, price 43$! :)
The tray:
https://lh4.googleusercontent.com/-UfXU-d1kTJM/Uik_qYZjPyI/AAAAAAAABBQ/Ccs5mbw_v5c/w1284-h963-no/20130906_043618.jpg
https://lh5.googleusercontent.com/-7e5CEHXoD24/Uik_wmfl3FI/AAAAAAAABBc/c8CTwgA2A2U/w1284-h963-no/20130906_043640.jpg
The GH60 order is everything or nothing since I will just PM one of the designers to change the shipping address so I dont have to forward after I recieve it.
I would prefer to sell the tray together with the GH60 order, but if I get offers on both from different people that is ok too!
The price of the GH60 order was 174$ so that is the minimum price! I think I will be let this run for a week and unless the minimum price isnt reached I will find the buyer then.
The tray will be sent from Denmark.
So to sumerize:
2x PCB's (SMD Soldering done)
2x ISO 1.25x plate
2x Cherry PLATE mount stabilizers kits with a 6.25 spacebar wire.
65x MX Green
no assembly service
Alu Tray
65x MX Clear (from 7Bit)
Total price I paid: ~342$
EDIT:
I forgot that I have a set of RA2.0 clone caps from the groupbuy organized by tjcaustin a while back. I will also sell them, 100$ plus shipping from Denmark. I also have the ISO set with this.
Sold Items:
RA2.0 Set
MX Clear switches
GH60 Order
-
Why ISO XD
-
Do you know if its possible to change the plate to something else? like iso to ansi, since I'm not sure what point of production it is at... but you will probably find a buyer :)
-
are you auctioning something you don't even own yet
-
No, there is no chance to change that sadly. BUT I bet it wont be too hard nore expensive to get ansi plates made, alot of info in the GH60 thread about cases and plates. Alot of new member designed cases will be made with the GH60 in mind, quite some of them with either built-in plates or a plate option from what I know.. :)
-
are you auctioning something you don't even own yet
you can still transfer the order
-
are you auctioning something you don't even own yet
Pretty much..
I have been going over the rules a few times and cant seem to find anything prohibiting auctions, but if its against the rules I will change the thread!?
-
will you sell the mx clear separate?
-
will you sell the mx clear separate?
Maybe, I will have to find out if it is possible.. Give me a day or two and I hope I will have an answer..
-
btw please update your OP for this
2x Preassembled PCB's (smd soldering already done.)
2x Cherry PLATE mount stabilizers kits with a 6.25 spacebar wire.
-
are you auctioning something you don't even own yet
I think you can own something on a moral level if you've already paid for it.
-
I might be interested in the alu tray depending on the price.
-
btw please update your OP for this
2x Preassembled PCB's (smd soldering already done.)
2x Cherry PLATE mount stabilizers kits with a 6.25 spacebar wire.
Right, I'll do that once I'm at a computer again.. :)
-
I might be interested in the alu tray depending on the price.
I would like to get about 125 plus shipping, you can get it now for that price.. :) it hasn't been used, been sitting in its protection in a box since I got it..
-
Damn, I would gladly take the pcbs, but i don't need ISO... and I have switches already!
GLWS!
-
Damn, I would gladly take the pcbs, but i don't need ISO... and I have switches already!
GLWS!
If you buy only pcb I think GON's cases have a plate with them (among others?)
-
Damn, I would gladly take the pcbs, but i don't need ISO... and I have switches already!
GLWS!
If you buy only pcb I think GON's cases have a plate with them (among others?)
I would gladly take on the pcbs, but he will be stuck with iso plates alone and switches. Switches could be easier to resell, but an ISO plate will probably be harder to sell alone. In the end, I understand him for trying to sell all at once. But if he decide to split it, I will be glad to get only the pcbs!
-
If the order can be parted (Paying extra in shipping, or just bundling with my current GH60 order) I can take one set of a plate, stabilizers, and either the green or clear switches.
-
If the order can be parted (Paying extra in shipping, or just bundling with my current GH60 order) I can take one set of a plate, stabilizers, and either the green or clear switches.
If the order has to be split you have to wait until I receive the package, and then the price will go up because of shipping from me to you and another buyer. Also the point of me selling this now is that I would like to money now, but if two guys want to buy one each and can pay now, that is ok by me, you will just have to wait for them to reach me and also pay for the extra shipping.
-
So you don't think they can just take part of the order and combine the items with my order, and the other half with/for someone else? I should PM them and ask.
-
So you don't think they can just take part of the order and combine the items with my order, and the other half with/for someone else? I should PM them and ask.
its worth a try, but I dont think they will..
-
The RA2.0 set is sold and so are the MX Clear switches. :)
-
Minor update in the first post.
-
If anyone wants to split this order, please let me know. I would be willing.
-
If anyone wants to split this order, please let me know. I would be willing.
And just to make this clear, the GH60 order CANNOT be split up, that is not a matter of me not wanting it, its just not possible! (of course you can team up with a buddy and split it that way, just as long as there is only one shipping address and one payment to me.)
I hope you read that
-
If anyone wants to split this order, please let me know. I would be willing.
And just to make this clear, the GH60 order CANNOT be split up, that is not a matter of me not wanting it, its just not possible! (of course you can team up with a buddy and split it that way, just as long as there is only one shipping address and one payment to me.)
I hope you read that
Thanks. I did read that, which is why I posted this. I wouldn't have posted 'If anyone wants to split this order, please let me know. I would be willing.' if I didn't know I would need someone to split the order with before I take the whole thing over and figure it out with whoever would want to split it with me.
Obviously, I'm trying to find someone who would split it with me.
-
just making sure you knew it had to be shipped again once received, good luck.
-
I'm interested in one PCB and one set of stabs, so let me know if anyone wants to split the order.
-
Reaching out to Moz, Think we are about to take this!
-
Reaching out to Moz, Think we are about to take this!
I'm interested in one PCB and one set of stabs, so let me know if anyone wants to split the order.
Any news guys?? :)
-
We'll take it.
-
We'll take it.
Gratz moz! (and Audukent too ;) )
-
Well I geuss they are still for sale..
also still have the tray for sale, the tray might be gone soon though.
-
Sorry, I had to backout, thanks to bro TurkishRambo who offered a PCB. If anyone is interested, I would suggest you get it as:
- Audukent is looking for one set of plate+PCB
- pix3l_fodder is looking for the ISO plate on deskthority
Not sure about the switches, so a PCB is *technically* up for taking.
-
The GH60 order is also sold now.
-
The GH60 order is also sold now.
Update your OP so people like me don't get confused thinking you still have one for sale and sold.
-
The GH60 order is also sold now.
Congrats !!! You 're sucess ;)
-
I still have the Alu tray if anyone is interested..!