geekhack
geekhack Community => geekhack Media => Topic started by: MOZ on Mon, 07 October 2013, 14:33:32
-
So I made a Breaking Bad inspired case in dedication of the great show it was. This is for my upcoming Phantom PCB from MK.
[attachimg=1]
The side view with and without flash:
[attachimg=2]
[attachimg=3]
I used the green and white from the opening sequence theme, the blue for the crystal meth and yellow and black for the feet, for the danger that was Walter White.
[attachimg=4]
[attachimg=5]
I'll be making a dust cover using this acrylic plate:
[attachimg=6]
I wanted to use the hat-glasses-beard image initially, however after the series finale, the skull and cross-bones version looked more apt. :D
EDIT: The bolts and nut are temporary, I'll be using flat head screws and brass stand-offs once the brass stand-offs come from China.
UPDATE
I finally got time to complete building the case, so here it is, still waiting on Toxic GB and a few other caps to reach me (Shot-key and toxic green gasmask) to complete it, till then just mixing things up with Tai Hao OEM DS green and Dolch Cherry mods.
I'm loving the layout and the pseudo-numpad.
PCB: White Phantom PCB from MechanicalKeyboards
Switches: Ghetto-greens, 80g springs from Originative in blue switches
Stabs: I was able to mod cherry plate stabs and glue them in, by cutting the top tabs on the stabs that lock the stab into the plate.
Layout: ANSI125 92-key
Firmware: Metalliqaz's keymapper generated custom
Material: All layers are cast acrylic, green-translucent blue-milky white-translucent yellow-smoke
Keycaps: Temporary Tai Hao green and Dolch Mods (Will put Toxic). Breaking Bad and crystal meth caps from TechKeys.
With the dustcover:
(http://i.imgur.com/6wNlKIa.jpg)
(http://i.imgur.com/ZLDhYGv.jpg)
Dust cover off:
(http://i.imgur.com/sCrQSvy.jpg)
(http://i.imgur.com/OyJiTF9.jpg)
(http://i.imgur.com/bzvZqVZ.jpg)
Back:
(http://i.imgur.com/aYfR9TE.jpg)
-
Ha, nice one moz! ;D
I love the series and I love this case too!
-
I swear this is the last acrylic update for tonight :P
I plan on using the breaking bad keycaps from SP for the 5 extra keys as compared to a traditional TKL. 3 meth caps and the two "Br" "Ba" on either side of the up arrow.
I think the Tai Hao Green set and the toxic set when it gets made would go best on this board.
-
Never seen breaking bad but that case is flipping sweet!
And I clearly should have asked for a dust cover, didn't know you were making those :eek:
-
Tai Hao
step it up
taohao has no place on this board
-
Never seen breaking bad but that case is flipping sweet!
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: Go.Watch.Now.
-
Tai Hao
step it up
taohao has no place on this board
Toxic it is bro, order has been placed, waiting for it to be produced. And the name of the set itself is match-made for this case.
-
How much did that cost you MOZ?
-
About $55
-
About $55
Wow thats a good deal...
-
About $55
Wow thats a good deal...
You could make one on your own pretty cheap if you wanted to. I have a place that does laser cutting nearby where you can get an hourly pass for $30 or monthly membership for $95-140. You could crank out several of these cases in an hour and the materials cost isn't obscene, so if you decided to sell some, you could probably offset the machine time cost pretty easily.
-
I love the work. Dual Colour layer.
-
About $55
Wow thats a good deal...
You could make one on your own pretty cheap if you wanted to. I have a place that does laser cutting nearby where you can get an hourly pass for $30 or monthly membership for $95-140. You could crank out several of these cases in an hour and the materials cost isn't obscene, so if you decided to sell some, you could probably offset the machine time cost pretty easily.
Still gotta buy acrylic
-
Very unusual combination, and I like the story behind it + the name :thumb:
-
I always wondered how does the acrylic cases fair with steel plate instead of the acrylic one, possible thing to pull out?
-
I should ask, how thick is the acrylic for this? I've been looking at making a case like this out of wood since I have a place I can do laser cutting/engraving at an hourly rate. I'd need to make up the files, but it should be interesting.
-
I should ask, how thick is the acrylic for this? I've been looking at making a case like this out of wood since I have a place I can do laser cutting/engraving at an hourly rate. I'd need to make up the files, but it should be interesting.
3mm per layer.
The case took almost two hours to cut, since I was there while it was happening. About 8 feet of acrylic used due to wastage because of the multitude of colors. So I don't kniw how much cheaper I could have got it cut.
-
MOZ you amaze me
-
I always wondered how does the acrylic cases fair with steel plate instead of the acrylic one, possible thing to pull out?
The acrylic Poker case I have works with a steel plate. You put it over the acrylic one provided.
-
Love this. Would have you make me one if I wasn't so damn poor lol
-
MOZ you amaze me
Thanks, it is this encouragement, that keeps me going.
Love this. Would have you make me one if I wasn't so damn poor lol
Woah, $60 is cheap as far as GH is concerned.
-
Woah, $60 is cheap as far as GH is concerned.
It's cheap as far as anyone is concerned when it comes to custom cases with custom color options. The last acrylic case I remember seeing was a minimum of $82 (http://geekhack.org/index.php?topic=44896.0).
I just want to play around with your design and see if I can make one with wood. I've been planning on making my own similar to this for a while with wood, but it would be easier to use someone else's design instead of mocking up my own for a prototype.
And with your prices, I'm sure people would flock to it if you ran a GB...after you finished the others of course.
-
Woah, $60 is cheap as far as GH is concerned.
It's cheap as far as anyone is concerned when it comes to custom cases with custom color options. The last acrylic case I remember seeing was a minimum of $82 (http://geekhack.org/index.php?topic=44896.0).
I just want to play around with your design and see if I can make one with wood. I've been planning on making my own similar to this for a while with wood, but it would be easier to use someone else's design instead of mocking up my own for a prototype.
And with your prices, I'm sure people would flock to it if you ran a GB...after you finished the others of course.
Hahaha. Yes, I know. But with the recent happenings, I am more interested in finishing the designs than having hundreds of guinea pigs.
If you need any help with the design, let me know :D
-
Updated OP with the completed build.
Now just waiting on Toxic GB to complete and some novelty keycaps.
-
Looks amazing I need one too, well different colors, but it looks awesome. I'd be looking for something to match toxic a little closer and be compatible with Phantom PCB.
-
Good god, give this man some toxic bros to outfit that thing with. Frigging beautiful, and it's gonna look amazing with the toxic set.
-
Looks amazing I need one too, well different colors, but it looks awesome. I'd be looking for something to match toxic a little closer and be compatible with Phantom PCB.
Using Phantom PCB on this. :)
-
I AM THE ONE WHO THOCKS
-
I need to start watching breaking bad and see what the hype is all about
-
I need to start watching breaking bad and see what the hype is all about
It ain't hype bro, it is pure awesomeness.
-
holy **** it is
1 down a bunch more to go
-
Awesome work MOZ!
P.S. We need to get that Heisenberg skull and cross bones on a keycap!
-
Yes we do.
-
okay yeah that's pretty hot
-
Which one looks best?
Or something else?
-
Which one looks best?
Or something else?
Damn this is a nice board! Fantastic work MOZ.
These examples here I like the 3rd one myself. I like the steps from blue to stripe to esc.
-
Yeah, I'm leaning towards that myself, but I just feel it is lacking a little bit of toxic. I was thinking of adding toxic arrows, but that would be too much going on in that area.
-
Yeah, I'm leaning towards that myself, but I just feel it is lacking a little bit of toxic. I was thinking of adding toxic arrows, but that would be too much going on in that area.
Maybe full toxic with nontoxic stripe?
-
Too much toxic kills it.
-
I need to start watching breaking bad and see what the hype is all about
It ain't hype bro, it is pure awesomeness.
97% pure.
-
Too much toxic kills it.
Haha, that statement makes sense. I guess it would be too bright. I like the subtlety of just the stripe myself.
-
I think this looks best
-
put br above the up arrow
-
I think this looks best
That's pretty good. Kind of follows the brokenness of the green and blue br/ba. I like seeing these mockups. Helping me to visualize what I might do with mine.
-
I thought I would like having the whole right side of my phantom full like that, but I have found over the last week that I don't like it much. I'm thinking of going with some of the SP e-sports caps in those 5 extra spots since they look low profile.
-
I've been using my Phantom for a few days now and I am liking it, I just need to make changes to the firmware so that the scroll lock LED lights up when on another layer besides the default.
-
I've been using my Phantom for a few days now and I am liking it, I just need to make changes to the firmware so that the scroll lock LED lights up when on another layer besides the default.
That would be a cool feature. Let me know if you figure that out.
By the way phantom looks good! It's unique