geekhack
geekhack Marketplace => Interest Checks => Topic started by: sprit on Sat, 19 October 2013, 14:01:40
-
Group Buy Started!!
http://geekhack.org/index.php?topic=50580.0 (http://geekhack.org/index.php?topic=50580.0)
60% mini : ANSI + ISO
The Cutting-Edge Technology and Design
Hello, Everyone ! I am sprit , a member of GeekHack & KBDmania. ... Spamming Colors ... From The Back Space
my articles on 60% mini : http://geekhack.org/index.php?topic=49405.0 (http://geekhack.org/index.php?topic=49405.0)
my articles on KBDmania : http://www1.kbdmania.net/xe/tipandtech (http://www1.kbdmania.net/xe/tipandtech)
http://www1.kbdmania.net/xe/?_filter=search&act=&mid=photo&category=&search_target=nick_name&search_keyword=sprit (http://www1.kbdmania.net/xe/?_filter=search&act=&mid=photo&category=&search_target=nick_name&search_keyword=sprit)
At this Moment, I'd like to tell My Case Design Concept.
" 100% Interchangeable, 100% Interoperable, 100% Mix n Match ! "
All 60%, 75%, 87% Cases will do.
http://www.youtube.com/watch?v=xoTlxNRCFew&feature=youtu.be (http://www.youtube.com/watch?v=xoTlxNRCFew&feature=youtu.be)
http://www.youtube.com/watch?v=ZPuhuiQZxQs (http://www.youtube.com/watch?v=ZPuhuiQZxQs) Finale
http://www.youtube.com/watch?v=IkbrkLIaISI&feature=youtu.be (http://www.youtube.com/watch?v=IkbrkLIaISI&feature=youtu.be)
http://www.youtube.com/watch?v=HQF-l9NBtX8 (http://www.youtube.com/watch?v=HQF-l9NBtX8)
The Design : Full LED and HW Macro
- Cutting-Edge Technology Design and QC by THE CREATOR of A.87 and MX-mini
- He is the Most Famous Independent PCB Designer, Mr. BeastMask From Korea.
- The Creator himself developed the top-of-the-line : A.87, A.87 ps2avr, A.87U, MX-mini
- USB and PS2 Auto-detect. 3rd generation. Open Source based.
- Designer's Page : http://winkeyless.kr/67 (http://winkeyless.kr/67) http://winkeyless.kr/66 (http://winkeyless.kr/66)
Full LED Control
- Full LED control, latest LED modes, regularly updated. Open Source based.
- LED modes at present : 1. Off 2. always On 3. fading, breathing, dimming 4. getting brighter 5. getting darker 6. Typing Reactive on / off etc ....
- New modes under development among the User groups. Everybody Invited in GH.
- LED modes : http://www.youtube.com/watch?feature=player_embedded&v=KaZKv8lTzHM (http://www.youtube.com/watch?feature=player_embedded&v=KaZKv8lTzHM) (Oct.12 : Firmware Upgraded)
- LED Flight - http://www.youtube.com/watch?v=ZPuhuiQZxQs (http://www.youtube.com/watch?v=ZPuhuiQZxQs) (Oct.25)
[attach=17]
Features
- ANSI + ISO in one PCB. (concept design by sprit for ISO users)
- All keys Programmable, Hardware Key mapping, HW Macro support. ATmega32A-AU controller. Open Source based.
- Supports Cherry Stabilizers, both PCB mount and Plate mount types.
- Supports FN key almost at any position You like.
- Supports both Plate / PCB Connections to the Case (suggested by sprit for Systematic reasons)
- Extra 8 Support holes for PCB mount method with the case (suggested by sprit for Oscillatory Kinetic reasons)
- Supports the Standard 6.25x Winkey, 1.25x1x1.25x 7x Winkeyless, 1x1.5x (6x) 7x 1.5x1 HHKB 1x1 BackSpace
- Supports most Keycaps including Cherry Originals : Capslock, Spacebar, Enter, ANSI+ISO.
[attach=3]
International GB
- PCB Color options : White, Red, Blue, Black- 1.6T (1.6mm) Heavy Duty PCB for GeekHack Users (suggested by sprit, for International Special Edition)
- Case Compatibility : All 60% poker I, II, KBC Pure, and all poker compatible Alu, Acrylic Cases, etc...
- Price Policy : Fixed Price 50 USD / 1pcb (MoQ = 50 pcs 1.6T PCB, ANSI+ISO, All SMD parts are pre-soldered and Tested = Special Edition )
(Bulk version : 1.2T PCB, bulk controller parts, No Resistors, No diodes, ANSI only = 38 USD in Korea)
- Delivery : Production in Two Weeks, Delivery in two Weeks.
- Manufactured in Seoul, Korea, shipped from Seoul.
If You are interested, Vote as below.
- ANSI / Red color / 2 PCB / Plate / Case
- ISO / white / 3 PCB / Plate / Case
* Case : design finished, around 70 / 100 /150 USD depends on Materials (Not Fixed), Pics will come When GB starts.
1. Acryl Case : Clear, White, Yellow, Orange, Red, Green, Lime, Blue, Black, etc ~ 70 USD
2. Carbon Case (Polycarbornate) ~ 100 USD
3. Metal Case : lots of Colors * pics will show with GB start.c ~ 150 USD
* Korean User Manual updated Oct.16 http://winkeyless.kr/68 (http://winkeyless.kr/68)
* English User Manual will be available soon, before shipping.
* Pics below are Face U ( 1.2T, green, ANSI only version, released Oct.17 in Korea)
-
How much would it cost?
Might be good for those who missed out on the GH60 GB.
-
I am interested in ANSI/whatever color but prob white #1 and red #2/ 1-2 (depends on price and answers)
1. What would be the price tag?
2. What controller will be used?
3. What's the expected production date?
-
Depends on price :O
-
Thank You a lot! More Details updated !
-
ANSI | Blue/White | 1-2 pcs
-
ANSI | Red/White | 1pcs
-
So diodes are already soldered?
-
ANSI | Black | 1 pcs
-
If I read that correctly, it's $50 (plus shipping?) with MOQ of 50, and yes SMD pre-soldered.
A very good deal and very interesting (I'd go for ANSI) but I have a tiny question about this series of 60% boards. See, I'm sold on my dedicated arrow keys (WKL is fine) and can't tell but it looks like this board doesn't really support enough 1x keys down in the right hand corner for that.
Comments?
-
Hum, at 50$ I would be down for 1, ANSI (1.25), color GREEN!!! (well, if not available like in picture, color choice would be white, but any other would be fine also)
-
If I read that correctly, it's $50 (plus shipping?) with MOQ of 50, and yes SMD pre-soldered.
A very good deal and very interesting (I'd go for ANSI) but I have a tiny question about this series of 60% boards. See, I'm sold on my dedicated arrow keys (WKL is fine) and can't tell but it looks like this board doesn't really support enough 1x keys down in the right hand corner for that.
Comments?
May I answer with this pic ? You may do it with 4 keys on the right corner as arrow keys, shown in the in the pic. You may save Shift key for the up arrow by Fn + down arrow .
No near future support for the four 1x keys in the right bottom row is planned, for PCB Stability and SW Solidity issues down there.
[attach=1]
-
May I answer with this pic ?
[/quote]
Touché. 1pcs / ANSI then.
-
Missed out on the GH60, interested
-
$50? I'd probably be in for a pair or three if I have the money at the time.
ANSI|White/Black|1-3
-
Also, what cable is supported by default? usb or ps2? Also, will the code be opensource and pre-installed?
-
Also, what cable is supported by default? usb or ps2? Also, will the code be opensource and pre-installed?
USB and PS2 Auto-detect, thx a lot for your precious point!
-
Very interested. 1 ISO Black and 1 ANSI White
-
ANSI White x 1
-
ISO Black x 1
-
Details updated :)
-
OK so now that I've seen both your IC's I can say I like them both ... but will not, myself, be able to get one of each.
So, when the GB happens, I'll quick-like source a plate, I guess, and whichever size plate I can get more reasonably I'll order a matching PCB with SMDs in ANSI. Don't care red/black/green/purple.
-
May I answer with this pic ?
Touché. 1pcs / ANSI then.
Hello, What kind of Touché ? Touch.... not Entre ,.... ? :)
-
I am interested in ANSI/whatever color but prob white #1 and red #2/ 1-2 (depends on price and answers)
1. What would be the price tag?
2. What controller will be used?
3. What's the expected production date?
More details updated! further questions welcomed!
-
ansi/ whatever color except white/ 2-3
-
I'm in for sure
-
$50? I'd probably be in for a pair or three if I have the money at the time.
ANSI|White/Black|1-3
The price is refered to the established PCB price system. For example, latest and Not pre-soldered MX-mini and A.87 (designed by BeastMask) are around 38~42 USD incl. tax, in Korea.
http://www1.kbdmania.net/xe/market_info/7508028 (http://www1.kbdmania.net/xe/market_info/7508028) http://winkeyless.kr/65 (http://winkeyless.kr/65)
FaceU : 1장당 38,500원 (부가세 포함, 현금 영수증 발행) = translation = 장당 38,500 KRW /1pcb = 38 USD un-assembled, bulk parts.
-
ANSI 2 WHITE
-
I'm in for an ANSI also.
-
Ansi - White - 1
-
Can the ISO version support an ANSI size left shift key?
-
Very Interested, I'm in
showing my love for sprit :-* :-*
-
Can the ISO version support an ANSI size left shift key?
Sure! For ISO, We are ready for any Request! :) No Worries ! ANSI + ISO in one PCB !
-
Holy balls these support Alps too?!?! Make that 2 for me.
-
I think im going to get one or two of these, but the only problem is that i don't have my plates yet :( :(
-
Holy balls these support Alps too?!?! Make that 2 for me.
ALPS will be another independent PCB. :) And the most good thing of It is Pan Alps! (Dell, SGI, Apple compatible, still under final revision now.)
-
Ansi white 1pcb
ISO blue 1pcb
very nice :thumb:
-
Holy balls these support Alps too?!?! Make that 2 for me.
ALPS will be another independent PCB. :) And the most good thing of It is Pan Alps! (Dell, SGI, Apple compatible, still under final revision now.)
Ah okay, I'll probably order two of the MX PCB's anyway haha
-
ANSI / Black color / 1 pcb
ANSI / White color / 1 pcb
All Denpend On PRICE
-
Question: what led modes are available right now?
I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be
only activated when on hold since its on hold. If that its not available please suggest so. Thanks! :)
-
ISO / green / 1 pcb
edit: changed colour preference
-
It looks great,
I'm interested in:
ANSI / Black color / 1 pcb
ANSI / Blue color / 1 pcb
Thanks :thumb:
-
Question: what led modes are available right now?
I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be
only activated when on hold since its on hold. If that its not available please suggest so. Thanks! :)
- Full LED control, latest LED modes, regularly updated. Open Source based.
- LED modes at present : 1. Off 2. On 3. fading, breathing 4. getting brighter 5. getting darker 6. push on : new modes being developed.
- LED preview : http://www1.kbdmania.net/xe/photo/7439979 (http://www1.kbdmania.net/xe/photo/7439979) need to be updated.
[/size]
-
Awesome!
Intersted in:
ANSI / Black / 1 PCB
ANSI / White / 1 PCB
-
I just noticed this:
"- the essential SMD parts pre-soldered and tested."
Are there some SMD components for other facets of the keyboard that won't come soldered in place?
-
I just noticed this:
"- the essential SMD parts pre-soldered and tested."
Are there some SMD components for other facets of the keyboard that won't come soldered in place?
Hello! Nice Shot! ^^ Chip resistors! for LEDs depends on Qty, Machined, or Hand-Arbeit :thumb:
-
ISO / black / 1pcb
-
Do you have a time-frame for when this GB will be starting?
-
Yes Sir! From Monday or Tuesday will be OK for You?
The shipping will start in 14 days from the Group Order.
-
How long will it run for?
-
Yes Sir! From Monday or Tuesday will be OK for You?
The shipping will start in 14 days from the Group Order.
Sounds good to me!
-
How long will it run for?
actually depends on the Qty of ISO.... :)
-
How many ISO boards do we need? 50?
-
Isn't the same PCB used for ISO and ANSI?
-
Wow, Spirit. It's likely as Thumb PCB ?
-
ISO / black / 1pcb
Now:
ISO / black / 1pcb
ISO / white / 2 pcb
-
Wow, Spirit. It's likely as Thumb PCB ?
thumb has smaller profile it's own, too much room to fit into Poker.
-
How many ISO boards do we need? 50?
Yes right ! Mr. longweight!
-
The OP is misleading, you state the ANSI/ISO are on one PCB, if that is the case then why do we need 50 ISO PCBs?
-
The OP is misleading, you state the ANSI/ISO are on one PCB, if that is the case then why do we need 50 ISO PCBs?
Just in case, for ISO plates and production rev. bugs, retouch patterns etc. So we need a certain level of qty' But I deadly love to produce ANSI + ISO ! for my taste! sorry for me! :)
-
Do we get the textured PCB? They look really good.
-
ANSI / White color / 1 PCB
-
ANSI White 2
-
ANSI / Black Color / 1 PCB
-
Everyone vote for ISO! That way we get a PCB that can do both ISO and ANSI.
-
Question: what led modes are available right now?
I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be
only activated when on hold since its on hold. If that its not available please suggest so. Thanks! :)
- Full LED control, latest LED modes, regularly updated. Open Source based.
- LED modes at present : 1. Off 2. On 3. fading, breathing 4. getting brighter 5. getting darker 6. push on : new modes being developed.
- LED preview : http://www1.kbdmania.net/xe/photo/7439979 (http://www1.kbdmania.net/xe/photo/7439979) need to be updated.
[/size]
Thanks for answering! So no-go on my plan on the shift lock led?
-
1 ISO. Color not important.
-
Question: what led modes are available right now?
I'm planning to make my capslock a shiftlock with a cherry mx lock key, so the led on it must be
only activated when on hold since its on hold. If that its not available please suggest so. Thanks! :)
- Full LED control, latest LED modes, regularly updated. Open Source based.
- LED modes at present : 1. Off 2. On 3. fading, breathing 4. getting brighter 5. getting darker 6. push on : new modes being developed.
- LED preview : http://www1.kbdmania.net/xe/photo/7439979 (http://www1.kbdmania.net/xe/photo/7439979) need to be updated.
Thanks for answering! So no-go on my plan on the shift lock led?
I will check it!! :)
-
Just want to make sure, will this PCB fit GON's GH60 case?
-
ANSI | Blue/White |1-2 pcs
Depending on the price
-
Just want to make sure, will this PCB fit GON's GH60 case?
I believe it is. Since they are both compatible with poker cases.
-
for official count
ANSI / WHITE / 2 PCB
and it does look like it will fit every 60% case..which is good :thumb:
-
I just noticed this:
"- the essential SMD parts pre-soldered and tested."
Are there some SMD components for other facets of the keyboard that won't come soldered in place?
Hello! Nice Shot! ^^ Chip resistors! for LEDs depends on Qty, Machined, or Hand-Arbeit :thumb:
I'm not sure what you're saying. Are you saying that the LED resistors aren't soldered on?
-
Just want to make sure, will this PCB fit GON's GH60 case?
I believe it is. Since they are both compatible with poker cases.
That's what I think too :cool:
ANSI / Black / 1 PCB
-
...and I just sold my Cherry MX stuff. WHEN WILL IT END
-
Is it not possible to just include the ISO changes? I am sure that most would like the option to use the PCB as ISO but I don't think that we will get 50 ISO votes.
Maybe make the situation clearer in the OP? What would the price implication be for ISO inclusion?
-
I'm really confused by this - is it a combination PCB like the GH60 where you can have both ANSI and ISO on the same PCB or are they separate? Are we voting for whether we'd want one or the other? Are we voting for the colour of the PCB too?
-
I'm really confused by this - is it a combination PCB like the GH60 where you can have both ANSI and ISO on the same PCB or are they separate? Are we voting for whether we'd want one or the other? Are we voting for the colour of the PCB too?
I believe it has the ability to use both ISO & ANSI all in one pcb..but i'm not sure
it has a lot of bottom row layout options, similar to the GH60
There are 4 color options too, Red, Blue, Black, White
-
This is what I have inferred. The PCB would support ISO and ANSI, however at the moment it only supports ANSI, and OP needs 50 people or so, so that he can get the design changed to support ISO.
-
This is what I have inferred. The PCB would support ISO and ANSI, however at the moment it only supports ANSI, and OP needs 50 people or so, so that he can get the design changed to support ISO.
Must get more ISO!!! If no ISO then I'll probably would not order. :(
-
Yes 50 people will need to ask for ISO for it to happen.
-
I already asked for ISO, so nobody look at me!
Also, I'm in the "no iso = no buy" camp.
-
Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...
-
Let's all just express our support for ISO, and make it happen
-
Then register your interest :)
-
Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...
Ah right - if I were to buy this I'd definitely want support for ISO and ANSI...
You guys are great :)
-
sprit is working with BeastMask to get ISO/ANSI support on the same PCB. The design isn't final yet, but I believe we will know something more soon.
-
Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?
-
Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?
Any PCB can be used with a plate, atleast as far as Cherry MX switches are concerned.
-
Can each LED be addressed individually in the firmware?
-
Is it possible for this to be used in conjunction with a plate? or is it only designed to be used for PCB mounted switches?
Any PCB can be used with a plate, atleast as far as Cherry MX switches are concerned.
sweet =D
-
ANSI / White / 1 PCB
-
I guess I'll plan out my 60% build based on this upcoming new PCB xD
-
I guess I'll plan out my 60% build based on this upcoming new PCB xD
Haha I just ordered 2 plates and some more clears from GON because of this. Was going to get some cut up locally but for $40 including anodising GON is damn hard to beat.
-
I'm in for three: Blue, White and Black
-
I guess I'll plan out my 60% build based on this upcoming new PCB xD
Haha I just ordered 2 plates and some more clears from GON because of this. Was going to get some cut up locally but for $40 including anodising GON is damn hard to beat.
are his plates on his website or did you just PM him for plates? o.0 can't seem to find it on his site...
-
http://www.gonskeyboardworks.com/accessaries/17-universal-frameplate-for-60.html
-
Count me in!
Two ANSI, 1 red, 1 white
-
http://www.gonskeyboardworks.com/accessaries/17-universal-frameplate-for-60.html
Thanks MOZ! didn't see that o.o lol
-
sprit is working with BeastMask to get ISO/ANSI support on the same PCB. The design isn't final yet, but I believe we will know something more soon.
As we know, Basically ISO enter and 1.25x shift support on the PCB is absolutely required. And the Firmware for sure.
We are working on ANSI+ISO, and now doing finalizing the Release Candidate..
I do Love ISO for myself, just because I have learned some of your languages and got friends there, my fellow Europeans...
-
Can each LED be addressed individually in the firmware?
We User Groups here working on the Cutting-edge Tech on LED control Functions.
http://www1.kbdmania.net/xe/data/7440167 (http://www1.kbdmania.net/xe/data/7440167)
We have been watching Mr. BeastMask always happy to open his firmwares to the Public, It's Open Source!
So You Guys any part in the world are invited to work happy together. :thumb:
Big Welcome ! Happy Hacking !
-
Interested in one White ANSI
-
ANSI/white/1 PCB
-
One of my old buddy, the Poker mini says ' Hello, new bro!'
-
when we can buy this or GB open sprit?
-
when we can buy this or GB open sprit?
FACE W 60% Special Edition under Final Test Tomorrow.
Big Welcome ! Happy Hacking !
-
Interested in:
ISO / white / 1 PCB
ISO / blue / 1 PCB
-
Notice! : Updated
If You are interested, Please Reply as the examples below. (Updated)
- ANSI / Red color / 2 PCBs / plate / case
- ISO / White, Black / 3 PCBs / plate / case
* Case : design finished, around 100~150 USD (materials, Prices pending, Pics will come when GB starts) Just Quick IC. for Interests
-
So price is now 60$?
Also, question to MOZ (I am sure you will read this :p) With you coming acrylic case GB, I expect I wont need a plate since there will be one included in the case right?
So, my order will still be :
ANSI/White/1 PBC/no plate/no case
-
So price is now 60$?
What makes you think so?
The OP still says 50$ plus shipping.
-
The OP still says 50$ plus shipping.
The Price will be FIXed 50 USD ! :)
-
Does that include the plate?
-
Does that include the plate?
There's no mention of plate in the OP... so no
-
The OP still says 50$ plus shipping.
The Price will be FIXed 50 USD ! :)
ok, all good, but on my screen, maybe because it's some kind of radiating green, it looks a lot like 60 instead of 50!
-
ANSI / Blue color / 1 PCBs / plate /
ANSI / White color / 1 PCBs / plate /
-
will there be different plates available?
-
Also, question to MOZ (I am sure you will read this :p) With you coming acrylic case GB, I expect I wont need a plate since there will be one included in the case right?
The acrylic mounting plate as the top layer would be an option like most of my other cases, yes. However once the plate design from sprit is confirmed, I will try my level best to make it compatible with the case, so you can have a tray style drop-in case.
-
ISO / textured blue color / 1 PCBs / no plate / no case
-
will there be different plates available?
My own Plate Design is compatible with Any 60% Plates!! POKER II, Phantom 60%, etc.. but,,,, materials issue...
I always try to follow the compatibility and open source.... + somethin'
-
sprit, still looking for an answer, will we get the textured finish on the PCB on one side?
-
ISO / White / 1 PCB
ANSI / Black / 1 PCB
-
ANSI / Blue PCB / Case + Plate = 1 complete order depending on the price of the case and plate I guess
-
sprit, still looking for an answer, will we get the textured finish on the PCB on one side?
Sure ! Sir! As You see in the photos!
-
ANSI / Blue PCB / Case + Plate = 1 complete order depending on the price of the case and plate I guess
Sure! the Plate / Case price will be Noticed (announced) when GB starts in this Week !
-
Hey! SpanishRay : Damn Thanks For Your Love !
From : HHKB = Happy H Kicking Butts
[attachimg=2]
[attachimg=1] From : HHKB = Happy H Kicking Butts
-
^^ nice!!
-
ISO / White / PCB / plate / case
-
Can we get a count for each option in the OP please?
-
Interested in a white ISO PCB depending on the options for plate and case. And of course the price of all 3.
Edit formatting: ISO / White,/ 1 PCB / plate / case - dependant on the above!
-
Wait...this is Cherry only even though the OP has a PCB showing Alps caps? I took a closer look at the PCB and it looks like it supports Cherry only?
Edit: jdcarpe confirmed that this is Cherry only so I'm no longer interested. Thought it supported Alps as well.
-
There is another thread for the alps version. But the pictures have me confused, in fact the whole thing has me confused :p
-
Can we get a count for each option in the OP please?
We are Happy ! Total might be over 100 PCBs !
ANSI + ISO PCB goin' to the Final Test-Production Tomorrow !
-
Wait...this is Cherry only even though the OP has a PCB showing Alps caps? I took a closer look at the PCB and it looks like it supports Cherry only?
Edit: jdcarpe confirmed that this is Cherry only so I'm no longer interested. Thought it supported Alps as well.
There is another thread with an alps PCB, show interest there if you still have it
-
There is another thread with an alps PCB, show interest there if you still have it
Yup, that's what I saw which prompted the question. Can't miss out on another 60% Alps board :D.
-
Cherry + Alps Fusion on a PCB puts a Huge PCB + Plate Design Obstacles.
So Let them Share the most of One Mother Design !
And Let Alps have much more Flexibility to Embrace most of It's own Brothers : The Warriors in Golden Days !
Dell, Apple, Omnikey, SGI, LeadingEdge ... and abundant siblings, cousins, compatibles !
-
There is another thread with an alps PCB, show interest there if you still have it
Yup, that's what I saw which prompted the question. Can't miss out on another 60% Alps board :D.
I think i'm getting in on both of these! should get some good use out of my clicky whites..
-
There is another thread with an alps PCB, show interest there if you still have it
Yup, that's what I saw which prompted the question. Can't miss out on another 60% Alps board :D .
I think i'm getting in on both of these! should get some good use out of my clicky whites..
Old rugged Alps Switches can be Transformed to a Silky New Ones...
http://www1.kbdmania.net/xe/tipandtech/7441990 (http://www1.kbdmania.net/xe/tipandtech/7441990)
-
Old rugged Alps Switches can be Transformed to a Silky New Ones...
http://www1.kbdmania.net/xe/tipandtech/7441990 (http://www1.kbdmania.net/xe/tipandtech/7441990)
I shall research when the day comes..my old white board is gross and dusty :))
-
Can we get some pictures of the PCB colours? Just to look at :)
-
LED modes . AVI Updated
- LED modes : http://www.youtube.com/watch?feature=player_embedded&v=KaZKv8lTzHM (http://www.youtube.com/watch?feature=player_embedded&v=KaZKv8lTzHM) (Oct.12 version )
-
PCB Colors
[attachimg=1]
[attachimg=2]
[attachimg=3]
-
Updated... Blue never Produced before . Mr. BeastMask's personal Taste... But This Time I will include Blue.
-
The White PCB uses in A.87 MX-mini 2nd generation, in many custom kbds....
Black Edition is quite old. Very calm Non-glare Black, like a Space Battle Ship....
In this GB, The Finishing colors will be taken Maximum Care By Myself and The CREATOR.
-
Hello! Mattics !
PCB + Plate + Case + SW + Keycaps = Keyboard
No Proper Reason to confuse People, It's the Designers Fault, I guess...
-
PCB Color choices are : White , Red , Blue, Black
-
Looks awesome! Definitely interested in ANSI White for the price. Will anyone be willing to set up a group buy for Cherry Switches for those of us that do not have excess ones?
Whoops: Format - ANSI/ White/ 1 pcs/ Plate/ Case
-
Looks awesome! Definitely interested in ANSI White for the price. Will anyone be willing to set up a group buy for Cherry Switches for those of us that do not have excess ones?
7bit has a group buy going on at DT
http://deskthority.net/marketplace-f11/cherry-mx-taking-pre-orders-t2760.html
-
Hello sprit, will you be able to post some pictures of the possible case for this? Or will you only post it for start of the group buy? thanks
-
Hello sprit, will you be able to post some pictures of the possible case for this? Or will you only post it for start of the group buy? thanks
Case Designs are started... last year... for my personal use..
Never Posted.... Never shown to others...
but to my GF.... :-\
Comming soon.... Surely Clumsy... Critisized.... Vanished.... I guess.....
-
Looks awesome! Definitely interested in ANSI White for the price. Will anyone be willing to set up a group buy for Cherry Switches for those of us that do not have excess ones?
7bit has a group buy going on at DT
http://deskthority.net/marketplace-f11/cherry-mx-taking-pre-orders-t2760.html
Thanks for the link.
Are there any assembly instructions for this? If I buy this, this will be my first keyboard that I will put together myself.
-
Thank You For Your Interest!
The Final version of PCB will be ready by Today. and will beTested.
-
ANSI | Black | 1pc
If it's not too late to express interest. Now I know what to do with my extra 65g MX Whites.
-
ISO / black / 1 PCB
Hope ISO happens, will PCB allow to replace backspace key with 2 1-unit keys so I can have backspace and delete keys?
-
ISO / black / 1 PCB
Hope ISO happens, will PCB allow to replace backspace key with 2 1-unit keys so I can have backspace and delete keys?
Sure !! 1x1 Split Back Space... I Love It
http://geekhack.org/index.php?action=dlattach;topic=49899.0;attach=40163;image (http://geekhack.org/index.php?action=dlattach;topic=49899.0;attach=40163;image)
Case Design Reference : HHKB 60% : My Design will show when GB stars this week
[attachimg=1]
[attachimg=2]
[attachimg=3]
-
ANSI / Black / 1 PCB
-
This is very exciting!
-
ANSI / White / 1 PCB / Plate / Case
-
[attachimg=1] [attachimg=2]
-
Ready to Launch ! Soon !
[attachimg=1]
Is This Love ?
I wanna love you, I want to love and treat you right;
I wanna love you every day and every night:
We’ll be together, with a roof over our heads;
To share the shelter in a single bed;
Is this love - is this love - is this love -
Is this love that I’m feelin’?
-
Awesome!
ISO / White / 1 PCB / plate / case
-
The Unversal Case coming soon this Week on GB start !
Do We Need a Black Case??
-
The Unversal Case coming soon this Week on GB start !
Do We Need a Black Case?? [/size][/font]
Are you asking if the colour of the case should be black? Or if we need to offer a case at all?
I'd like a case, and I'd like it to be black ;D
-
The Unversal Case coming soon this Week on GB start !
Do We Need a Black Case?? [/size][/font]
Are you asking if the colour of the case should be black? Or if we need to offer a case at all?
I'd like a case, and I'd like it to be black ;D
Black + Silver :)
-
Acryl / Carbon / Metal Cases are under final-finish for GB
-
I'd only be interested in a very low cost case, otherwise I'd rather source one myself.
-
I'd only be interested in a very low cost case, otherwise I'd rather source one myself.
I love that, and the original poker case too.
-
I'm personally very interested in a white colored case, but I would forgo color choices if the price of the case is low enough.
-
I'm personally very interested in a white colored case, but I would forgo color choices if the price of the case is low enough.
Acryl Case : Clear, White, Orange, Blue, Black ~70 USD
Carbon Case (Polycarbornate) : Clear (Transparent) ~ 100 USD
Metal Case : lots of Colors ~ 150 USD
edit / prices added Oct.23 14:51 AST
-
Sounds good. But how much will it cost it's another matter. hehe :p
-
I'd be interested!
ANSI/White/1 PCB/plate/case ;D
-
Interested! Would be interested in multiple cases if they were inexpensive (less than $50 usd)
ANSI/White/1 PCB/plate/case
-
Can we see diagrams for the acrylic case? Is it going to be laser-cut stacked layers?
-
Hows the testing Spirit? :cool:
-
Hows the testing Spirit? 8)
Hi! Test for Cases ? Sir ?
I have been making those case for my personal use... revised, revised since last December...
-
Hows the testing Spirit? 8)
Hi! Test for Cases ? Sir ?
I have been making those case for my personal use... revised, revised since last December...
Ooops. Sorry I meant the PCBs :)
-
Hows the testing Spirit? 8)
Hi! Test for Cases ? Sir ?
I have been making those case for my personal use... revised, revised since last December...
Ooops. Sorry I meant the PCBs :)
The pre-Final was perfect, The Final PCB to go production will in my hand tomorrow
-
Hows the testing Spirit? 8)
Hi! Test for Cases ? Sir ?
I have been making those case for my personal use... revised, revised since last December...
Ooops. Sorry I meant the PCBs :)
The pre-Final was perfect, The Final PCB to go prodution will in my hand tomorrow
BRILLIANT!! Can't wait now :)
-
I request for our Korean overlords to show us pictures of these cases!
-
I request for our Korean overlords to show us pictures of these cases!
Hello Overlord! WRU? male or female??
I am a Marine always. :)
Soon it will show itself.. promise!
-
Is there a plate option?
Would want to purchase cherry keys directly as well (if possible)
-
Is there a plate option?
Would want to purchase cherry keys directly as well (if possible)
Sure!!! Any Poker compatible plate fits!
-
Poker Face W 60% PCB Passed the Final Test Today morning.
Full Ready For Mass Production !
Soon to go GB with PCB / Plate/ Case options !
So Happy to have a ANSI+ISO Open Source 60% for Everyone on the Globe.
Thank You My fellow GH Members! 고마워요! - Sprit, from Seoul, Korea.
-
ANSI / White / 1 PCB / Plate / Case
-
Poker Face W 60% PCB Passed the Final Test Today morning.
Full Ready For Mass Production !
Soon to go GB with PCB / Plate/ Case options !
So Happy to have a ANSI+ISO Open Source 60% for Everyone on the Globe.
Thank You My fellow GH Members! 고마워요! - Sprit, from Seoul, Korea.
Awesome, can't wait!
-
so, a couple more questions, if I may:
Is the matias/alps 60% going forward too? I think that's my (slight) preference right at this moment ...
or, this PCB looks like it has holes for either matias OR mx switches ... is that right? So I could get this one, and matias switches and proceed that route?
Anyway I'm in for one of your many upcoming offerings. It's finally time for me to build a keyboard, and I'd like your board to be part of that.
-
Yikes , kinda ex
so, a couple more questions, if I may:
Is the matias/alps 60% going forward too? I think that's my (slight) preference right at this moment ...
or, this PCB looks like it has holes for either matias OR mx switches ... is that right? So I could get this one, and matias switches and proceed that route?
Anyway I'm in for one of your many upcoming offerings. It's finally time for me to build a keyboard, and I'd like your board to be part of that.
Take a look at the other IC threads, the Alps board is actually a separate PCB.
EDIT: speeling.
-
Take a look at the other IC threads, the MX board is actually a seperate PCB.
My ALPS PCB's are dedicated to the Alps brother's only....
for the MaXimum Compatibilty in the ALPS World. http://geekhack.org/index.php?topic=49930.0 (http://geekhack.org/index.php?topic=49930.0)
-
Happy Soldering. I like the Command Center get Operational !
[attach=1]
-
Spirit, if the GB goes live, how long will it take?
I expect it to be like 2 weeks only. ;)
-
Spirit, if the GB goes live, how long will it take?
I expect it to be like 2 weeks only. ;)
Hi!! As I clearly mentioned on the first page,
- Delivery : Production in Two Weeks, Delivery in two Weeks = Total 4 Weeks. promised !
- Manufactured in Seoul, Korea, shipped from Seoul, to the each Regional Proxy, saving the shipping cost for Everybody
-
Spirit, if the GB goes live, how long will it take?
I expect it to be like 2 weeks only. ;)
Hi!! As I clearly mentioned on the first page,
- Delivery : Production in Two Weeks, Delivery in two Weeks = Total 4 Weeks. promised !
- Manufactured in Seoul, Korea, shipped from Seoul, to the each Regional Proxy, saving the shipping cost for Everybody
Oh sorry, what I meant is the ordering phase, how long will it take? hehe
-
Hi!! As I clearly mentioned on the first page,
- Delivery : Production in Two Weeks, Delivery in two Weeks = Total 4 Weeks. promised !
- Manufactured in Seoul, Korea, shipped from Seoul, to the each Regional Proxy, saving the shipping cost for Everybody
I Believe In Freedom and the Equality of Opportunities for the all Members in a Society
I want set the MOQ as low as possible, I want the Order to be 1st and 2nd waves.
(= 2 Weeks Interval. 2 times in A Month. )
-
Interested... 1 pcb / ansi / * / *
-
My Place : I enjoy walk up to the hills and the views from there.
-
(Updated for You Reference)
- LED modes : https://www.youtube.com/watch?v=DBOqzWgTRjo&feature=player_embedded (https://www.youtube.com/watch?v=DBOqzWgTRjo&feature=player_embedded)
(http://geekhack.org/index.php?action=dlattach;topic=49902.0;attach=40919;image) (http://geekhack.org/index.php?action=dlattach;topic=49902.0;attach=40918;image)
-
I'm IN...
nice little keyboard ;)
-
I Believe in the Equality of Opportunities For the All Members In A Society,
I want set the MOQ as low as possible, I want the Order to be 1st and 2nd waves.
(= 2 Weeks Interval. 2 times in A Month. )
-
Acrylic Case Release Candidate 3 Under Test. In a week We will get the Final Candidate!
[attachimg=1] [attach=2]
-
That acrylic case looks amazing! :eek:
-
Little teaser of the case! i love it!
-
LED Flight
http://www.youtube.com/watch?v=xoTlxNRCFew&feature=youtu.be (http://www.youtube.com/watch?v=xoTlxNRCFew&feature=youtu.be)
http://www.youtube.com/watch?v=IkbrkLIaISI&feature=youtu.be (http://www.youtube.com/watch?v=IkbrkLIaISI&feature=youtu.be)
http://www.youtube.com/watch?v=ZPuhuiQZxQs (http://www.youtube.com/watch?v=ZPuhuiQZxQs) Finale финал
http://www1.kbdmania.net/xe/photo/7551544 (http://www1.kbdmania.net/xe/photo/7551544)
http://www1.kbdmania.net/xe/photo/7552413 (http://www1.kbdmania.net/xe/photo/7552413)
[attachimg=5]
[attachimg=4]
[attachimg=2]
[attachimg=3]
-
haha..someone's having too much fun at night :))
-
Hopefully I can just buy the case and throw my poker2 in it. I'm afraid of soldering .-. (And spending more money than I already have)
-
Hopefully I can just buy the case and throw my poker2 in it. I'm afraid of soldering .-. (And spending more money than I already have)
Probably, but if that's the case ... you could practice your soldering skills on the PCB -- if it works, you've got two 60% boards (and can probably nail the caseless one to plywood or something) If it doesn't work, well ... at least you don't have less than you were expecting to have!
Might hurt the resale value a bit, though. Melted PCBs are like that.
-
Hopefully I can just buy the case and throw my poker2 in it. I'm afraid of soldering .-. (And spending more money than I already have)
You don't need the weird soldering at all with Poker II. It's like changing your battery, put LEDs into and solder.
You can turn LEDs off / on/ dimmer/ etc...
I love Poker I, II deadly.
-
Can we throw in a 60% plate in this GB aswell? :)
-
ansi/ whatever color except white/ 2-3
GB starts soon in this week. Previews will Show with Photos and Videos on YouTube.
-
Can we throw in a 60% plate in this GB aswell? :)
We have been talking to apply GH 's Plate Treasure. This 60% is "All Poker compatible,
All Versatile, All ANSI+ISO. " Almost All Open Source Based. Everybody Invited to Join and make It Better!
-
Proto Case Updated. ProtoType 2nd with 60% Poker Pure.
Final Version has 2 options : Squared Corner, or Pyramidal Cut.
[attachimg=5]
[attachimg=6]
[attachimg=2]
[attachimg=1]
[attach=4]
[attach=3]
-
.
-
The teases ... lol
So when do you expect for the GB to start?
-
Keep the keyboard. I want the last picture.
-
Keep the keyboard. I want the last picture.
Welcome! This is me, after the previous Photo shoot ;D
[attach=1]
-
Another Prototype. Not The Final !
[attachimg=3]
[attachimg=1]
[attachimg=2]
-
So this acrylic case is only one piece? thats so sick!
-
So this acrylic case is only one piece? thats so sick!
I agree. The case looks spectacular.
-
At this Moment, I'd like to tell My Design Concept, Officially.
100% Interchangeable, 100% Interoperable, 100% Mix n Match !
All 60% Cases of Mine will do. All 75% Cases of Mine will do. and All 87 TKL will do.
All Poly models will 'Mix n Match' with Metallic models. They share all the basic Designs.
SPRiT Model 1A : Acrylic, Poly models ; PolyAcrylic, PolyCarbon, etc (Color, Clear, Smooth, hairline, rough, sanding,etc.. finished)
SPRiT Model 1M : Metalic models ; Dura-Alu, Chrome-Plated Metals, etc (Color, Smooth, hairline, rough, sanding, Chrome etc.. finished)
-
Another Prototype. Not The Final !
(Attachment Link)
(Attachment Link)
Phone-board caps!!! super jealous :-[
-
Well, My Friend Dubs What about This?
[attachimg=1]
-
I'm confused. Not to be rude, but what does that have to do with the IC? I'm definitely interested in the keyboard, but there's a lot of random stuff posted in here that is confusing me since it doesn't seem to have anything to do with the IC. I see new stuff posted, but it seems like the important info is being sandwiched between a lot of white noise.
-
I'm confused. Not to be rude, but what does that have to do with the IC? I'm definitely interested in the keyboard, but there's a lot of random stuff posted in here that is confusing me since it doesn't seem to have anything to do with the IC. I see new stuff posted, but it seems like the important info is being sandwiched between a lot of white noise.
The lambo pics are 'teasers' of the final case design, It's supposed to look like the photos he is posting
has me excited about it.. haha :thumb:
Well, My Friend Dubs What about This?
Let us see the final!! :D
-
I'm confused. Not to be rude, but what does that have to do with the IC? I'm definitely interested in the keyboard, but there's a lot of random stuff posted in here that is confusing me since it doesn't seem to have anything to do with the IC. I see new stuff posted, but it seems like the important info is being sandwiched between a lot of white noise.
The lambo pics are 'teasers' of the final case design, It's supposed to look like the photos he is posting
has me excited about it.. haha :thumb:
Ahh, that makes sense I get. There's just a lot going on in here that I am beyond lost on.
-
Terribly Sorry For that Mr. Nubbinator.. I Feel like a SM for myself :(
My Metal Designs under machining Now.... But I will post it Soon.
http://www1.kbdmania.net/xe/freeboard/7566705 (http://www1.kbdmania.net/xe/freeboard/7566705) under Brain Storming....
-
Terribly Sorry For that Mr. Nubbinator.. I Feel like a SM for myself :(
Concept Design under machining Now.... Not exactly the final photos.. But I will post it Soon.
http://www1.kbdmania.net/xe/freeboard/7566705 (http://www1.kbdmania.net/xe/freeboard/7566705) under Brain Storming....
No need to apologize. You just have a different way of expressing your thoughts than I do. I'm sure the language barrier certainly doesn't help either. Like I said, I'm really interested in the stuff you're doing and trying to bring here and how you're trying to make a more unified keyboard community, sometimes I just get lost in your presentation since I have a hard time seeing how it all is supposed to tie together. Some people explained it to me and it makes a lot more sense now.
-
Great Thanks and Big Love For You Guys!
In KBDmania Korea, I have the same Responses at all. some confusions...
My Attempts for the Unified Open Source Flatform is already suggested in many ICs and Topics .
I am doing Confusing My Fellow members in Korea and GH, but ONLY with the Case Look (container) ... not the PCB (brain)
But I believe in " New Idea in a New Cup " - an old Korean Saying.
...
There is No Verbal Barriers between us, We Each, just Breaking the Rules set by Ourselves. . .
-
The Last Preview
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
-
The Last Preview
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Yes!!! That looks beautiful, spirit!
-
When will the PCB buy open?
-
Hello! Londoner! Tomorrow Sire!
-
any picture of the plate, sprit ?
-
Hi ! bazh ! Plate will be basically GH Style ! I Love GH plates!
-
I can't wait! :thumb:
-
당분간 한국내 공제계획은 없습니다. 따라서 긱핵을 통해 정식으로 관심도 조사에 응해주시면 됩니다 ~
감사합니다!
For Korean Non GH members Only
(edited 15:38 AST)
-
google translate sez
There are no plans for the time being deducted in Korea. Thus, through gikhaek ones to respond to a formal investigation will be interest-
Thank you!
-
당분간 한국내 공제계획은 없습니다. 따라서 긱핵을 통해 정식으로 관심도 조사에 응해주시면 됩니다 ~
감사합니다!
I have no idea...
-
It puts me in mind of an interpretation, but that would make me a sad hobbyist.
Hopefully Spirit will be able to come back and explain what that means and when the group buy stage can actually start.
I'm not going to post my interpretation because if I'm wrong I'd have made everybody sad for no reason.
-
It puts me in mind of an interpretation, but that would make me a sad hobbyist.
Hopefully Spirit will be able to come back and explain what that means and when the group buy stage can actually start.
I'm not going to post my interpretation because if I'm wrong I'd have made everybody sad for no reason.
I put a Notice for Non GH Koreans to Join IC after the registration to GH.
Because I have no plan to open GB in Korea for now. Maybe after GH GB, after I got relaxed, I may open a GB for domestic Koreans.
I Love You Guys. Everything goes alright, Steady. !! :)
The GB will start On Monday(or Tuesday) after I consult the proper procedure to the Moderators.
You Know, I want start a really good GB. Thank You!
-
This is exciting. Might get one of these and keep only one of my GH60 PCBs.
-
I thought the GB would come on monday :)
-
Sorry for late !! The Factory was busy last week.
I will receive the Fianal Revised Samples Today..Tuesday Afternoon in Korean Time
= Morning in the Pacific and Atlantic !!
-
omgomgomgomg :p
-
Any update, Sprit? ;D
-
I'm definitely interested in some PCBs, maybe a case or two.
-
I can't wait. When do you run it?
-
I'm also very eager! ;D Keeping an eye out for this GB!
-
It's Raining in Seoul Today.
I'd like to go on Spammimg Colors ..... From The Dark BackSpace .....
http://www.youtube.com/watch?v=FTY8H7zjdtc (http://www.youtube.com/watch?v=FTY8H7zjdtc)
GB starts From Today !
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
-
I see...Olivia Lauren Swarovski! Is that a TKL or a full sized acrylic board you posted there? The bright colour and the angle you took the picture at makes it look really long...But I'm thinking it's HHKB layout :x
That acrylic case looks really beautiful! I'm building a new rig in an acrylic case, but I'm not sure if a keyboard case made of acrylic would get scratched from daily use...
(http://i.imgur.com/m5NH47b.jpg)
-
Frosty Finished = Half side Rough = Half side Shinny = Half side Sanding = Astel Finished. You can Flip-Flap Over !!
-
< GB Today ! From 09:00 AST>
http://www.youtube.com/watch?v=FTY8H7zjdtc (http://www.youtube.com/watch?v=FTY8H7zjdtc)
-
< GB Today ! From 09:00 AST>
http://www.youtube.com/watch?v=FTY8H7zjdtc (http://www.youtube.com/watch?v=FTY8H7zjdtc)
Awesome!!
-
Are the aluminum cases going to be hard anodized?
-
Can't wait. Defo can use another 60%
-
GB Started!
http://geekhack.org/index.php?topic=50579.0 (http://geekhack.org/index.php?topic=50579.0)
http://geekhack.org/index.php?topic=50580.0 (http://geekhack.org/index.php?topic=50580.0)