geekhack

geekhack Community => Keyboards => Topic started by: Reomero on Wed, 23 October 2013, 04:11:05

Title: Noppoo Mid 87 + Filco case?
Post by: Reomero on Wed, 23 October 2013, 04:11:05

I'm just wondering if this board can fit a case designed for a Filco considering the construction/design of the Noppoo is so similar (at least to my eyes).

So basically I just want to know if the position of screws and size of the PCB/plate match up (yes, the edge of the plate does bend down). If you have a Filco TKL can you do some quick measurements like I did below?

Here's the rough measurements I made:
(http://iforce.co.nz/i/0dd2xjcd.lgu.png)
(http://iforce.co.nz/i/3dvqycj4.wsu.png)

Thanks in advance :)

Title: Re: Noppoo Mid 87 + Filco case?
Post by: dorkvader on Wed, 23 October 2013, 11:50:56

I'm pretty sure they do not match up, especially the one on the left.

Title: Re: Noppoo Mid 87 + Filco case?
Post by: Reomero on Thu, 24 October 2013, 04:44:52

That's pretty much why I made this thread. I'd just like someone to confirm so my curiosity can go away. :rolleyes:

(Cmon, I know there are many here with a Filco TKL)