Sprit is 100% case the full board layout? will there be metal 100% case also? Also PCB and plate GB?Hello! Yes! It's a 110% Full Layout! Yes! Plate and PCBs too.
I would like to see some pictures of the side of the case to see the layers and also the front/back of it.Hello! Nice to See You! It was raining in Seoul Today, so I will prepare more photos in a couple of days!
Sprit is 100% case the full board layout? will there be metal 100% case also? Also PCB and plate GB?Hello! Yes! It's a Full Layout!
Metal Case models will start in two weeks due to the Factory Schedule.
Are the aluminum cases going to be hard anodized?I Love the Hard Ones!! I Do Hate Softy ones! Sire !
Will the 100% case be compatible with a Ducky Shine II?I can make a Mod Version for the Ducky Shine! Easy Job I guess!
do these come with stabilizers?I will check it Sir!
Nice! But I'm holding out for metal. :DSir! Would You Like This ?
Nice! But I'm holding out for metal. :DSir! Would You Like This ?
(Attachment Link)
Are the aluminum cases going to be hard anodized?I Love the Hard Ones!! I Do Hate Softy ones! Sire !
Nice! But I'm holding out for metal. :DSir! Would You Like This ?
(Attachment Link)
Are these acrylic cases (87) something that I could simply drop a filco into?May I prepare a Mod. cases for Filco? I am Preparing Some Mod cases for 87 boards.
Is matte finish acrylic case an option? The one in your interest check thread. And will the PolyCarbon cases be a separate GB thread?Thank You very much! Matte finish will be included for 100% Sure! Polycarbon is not in this 1st wave this week,
It makes more sense to me to extend deadline for this GB till metal cases come out. So we could combine shipping of PCB and cases.
- Thin or Wider, Color Option Page will open From Nov. 11 ~
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) [/size]
Metal + acrylic case? Oh this is gonna be fun.That is Absolutely Why I am into this GB. Sir!
Hello Sprit, does the TKL Acrylic Case/Metal Case accomodate for the Phantom PCB with plate??
Thanks!
OK! I have been Working on this!~~ and I say Yes!Hello Sprit, does the TKL Acrylic Case/Metal Case accomodate for the Phantom PCB with plate??
Thanks!
^This^
Are these cases bolted as I don't see any holes or are they glued?Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.
How do the layers of the case connect?Are these cases bolted as I don't see any holes or are they glued?Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.
Nothing Special Sir! Just Standard Connection for each Layers. Bolting! Not ugly on Top.. I will show It Soon ! Promise!How do the layers of the case connect?Are these cases bolted as I don't see any holes or are they glued?Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.
Two questions.1. Yes ! : thin/wider > round cut /sharp cut
Will the thick cases support the round cut?
Is this case case compatible with CM QFRs?
Do the PCB's just drop in loose, or will they need to be drilled for standoffs? Really want a case for my Race. :)
On 2nd read, my post wasn't as clear as I meant. I don't know if the Race's PCB mounting points are the same as the MX-Mini or other 75% boards, so I was just wondering if it will be compatible. Your own PCB's will be drilled during manufacturing, of course.Sir! No worries ! :thumb:
Just to confirm, the 75% case does fit a KBT Race PCB + keycaps?Yes Sure, Eyce!! There will be the connecting bolt holes with Any 75%, KBC Race 75%, MX-mini 75%... etc
Sprit please don't close the GB until you present us with the metal cases, I'm interested in the full board metal case + PCB + plate. Let this GB run until you have pics of everything so we can make a decision at the end, thanks :)
Will any of these cases fit a DAS ultimate keyboard? I understand that it has USB ports, but if its possible to remove them to fit in these cases, I can live with that.You can figure it out how to do that.
Yeah, I'm waiting for more pics of the cases/color options. Do the 87% cases have top covers?, or will the PCB be revealed where there are no switches?Thx ! The 87% and 110% cases have top covers.
Looks sick so far though :D
I will show final Photos Soon! I will Post all the Color combos too.
You dont need Wait too long!I will show final Photos Soon! I will Post all the Color combos too.
can't wait for it. :)
Yeah, I'm waiting for more pics of the cases/color options. Do the 87% cases have top covers?, or will the PCB be revealed where there are no switches?
Looks sick so far though :D
This may be off subject but, did you ever consider making acrylic wrist rests?I prepared Them ! Sir !
It can be a combination of these colors.
I think that, if and when it will be possible, some photos of 87% and 100% cases with a Filco/Phantom in there will boost the reservationsI will post some Pics ~
That case looks great. Can I dare to dream, of owning something equally as beautiful?My Cases In this GB, way Better ! :)
My Cases In this GB, way Better ! :)
My Cases In this GB, way Better ! :)Show Image(http://replygif.net/i/1049.gif)
- Thin or Wider, Color Option Page will open From Nov. 11 ~
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Are these pictures of the "thick" acrylic boards?
Really liking these, the 87% works with FC700R? Thanksyes 100% I will show that Pics soon!
I need one for my 7bit Phantom!TKL TOP Cover under Cover Now. It will show When ths MOQ meets. Sorry for That!
e: please do the 7bit top cover!
Sprit I'm waiting to see the metal case for the the full board, waiting on your pictures before I place the order ;)
SPRIT Model 1 Metal Cases
* GB will start 2 weeks Due to the Factory Schedule. * Only After PolyAcryl Cases got the MOQ.
* All Super-hard Anodized, All Color Finished, Titanium models,
A Pre-Check for MOQ >>> https://docs.google.com/spreadsheet/ccc?key=0AptJLSV1Tq7wdHRORVpQM2NDOWxFbTF0MTNka2poWkE#gid=0 (https://docs.google.com/spreadsheet/ccc?key=0AptJLSV1Tq7wdHRORVpQM2NDOWxFbTF0MTNka2poWkE#gid=0)
SPRIT Model 1 Metal Cases Pics will come in a Week.!
SPRIT Model 1 Metal Cases Pics will come in a Week.!
TKL TOP Cover under Cover Now. It will show When ths MOQ meets. Sorry for That!How much MOQ is required for 94%? the 94% isn't very common... and I'm willing to pay a bit more for a lower MOQ. It's essentially TKL with a few more cut outs.
Very excited to see the 75% metal cases.
why isn't there an option for a clear polycarbonate case for 110%?As We know, PolyCarbon is too strong to cut by a Laser cutter, So they do CNC mechnical machining.
why isn't there an option for a clear polycarbonate case for 110%?As We know, PolyCarbon is too strong to cut by a Laser cutter, So they do CNC mechnical machining.
So the surface has a lot of scratches, etc. So Hairline, or Mattie finish required. Result? Not clear, but Frosty, Mattie. Alas!
so... is 94% not happening? Your reply to my post wasn't clear.94% PCB, Not in this 1st wave of GB. Shot of MOQ. I feel bad for it! I will do it Next month! Promise!
Willing to pay a reasonable premium for 94%.
There, just ordered. But not sure if I did it correctly.75% Dark Green 1 set for hermith, OK? :)
Clear Case Pic. for Amir !How do I get a clear case like that?
A Round Cut Version is Available !
(Attachment Link)
There, just ordered. But not sure if I did it correctly.75% Dark Green 1 set for hermith, OK? :)
The 87 and 94% cases are Compatible!
The 87 and 94% cases are Compatible!
"compatible" but different, i suppose
The 87% case which type of pcb can fit in addition to the SPRIT Model 1?
What's the difference between polycarb and acrylic?Similar ! in Chemistry ! PolyCarbon is harder, harder for Your Fingers :)
Aren't they similar?
What's the difference between polycarb and acrylic?
Aren't they similar?
The 87% case which type of pcb can fit in addition to the SPRIT Model 1?
You can Look : What is the Title Of This Topic ?
What's the difference between polycarb and acrylic?http://www.coloradoplastics.com/blog-0/bid/42625/ (http://www.coloradoplastics.com/blog-0/bid/42625/)
Aren't they similar?
I'm a bit confused on the form, sprit. Most of it makes sense, but I'm curious about the "2nd address for emergency" and "Acry case : Color Options (3 Layers) : Which Color You like ?" fields. Is the Acry case field supposed to just be the colors we are choosing in the layer color options?
I'm a bit confused on the form, sprit. Most of it makes sense, but I'm curious about the "2nd address for emergency" and "Acry case : Color Options (3 Layers) : Which Color You like ?" fields. Is the Acry case field supposed to just be the colors we are choosing in the layer color options?
I was confused too. I just put "none" for second address and left the "Which colors" field black since it wasn't required.
For Your Reference
http://www1.kbdmania.net/xe/index.php?mid=photo&search_target=nick_name&search_keyword=SPRIT (http://www1.kbdmania.net/xe/index.php?mid=photo&search_target=nick_name&search_keyword=SPRIT)
(Attachment Link)
Mixed Ups ! swill :)For Your Reference
http://www1.kbdmania.net/xe/index.php?mid=photo&search_target=nick_name&search_keyword=SPRIT (http://www1.kbdmania.net/xe/index.php?mid=photo&search_target=nick_name&search_keyword=SPRIT)
(Attachment Link)
Those look great, but are they polycarb or acrylic?
Submitted an order form. Hope clear with white in the middle looks good.
Submitted an order form. Hope clear with white in the middle looks good.
That gonna be Superb !! One Of My Favorite! You Got a White PCB ? and a Clear Plate?
(Attachment Link)
Submitted an order form. Hope clear with white in the middle looks good.
That gonna be Superb !! One Of My Favorite! You Got a White PCB ? and a Clear Plate?
(Attachment Link)
Convinced me to order those too. :thumb:
Can I pay extra for you to solder the switches on? ;)
Interested in a metal 87 for my Phantom. Is it Phantom compatible, though? Didn't find anything in the OP.Well?
My understanding is the phantom was built to be filco compatible. So if his case is filco compatible, by extension the phantom should work fine.False logic.
Assuming you get a case, pcb, switches, LED's (optional) and a plate (optional), you need to solder them in. You also need caps to put on the switches.
Welcome to Color Spamming Division !!
(Attachment Link)
My understanding is the phantom was built to be filco compatible. So if his case is filco compatible, by extension the phantom should work fine.False logic.
Example:
If it rains, the street is wet.
But was there neccessarily rain, if the street is wet? ;)
Yes, the Phantom was designed to fit into a Filco. But, for example, Vortex' alu case doesn't fit (without mods) the Phantom. It has no stand offs, the case relies on the Filco plate.
It's hard to know for sure, but there are a few things I can say.Assuming you get a case, pcb, switches, LED's (optional) and a plate (optional), you need to solder them in. You also need caps to put on the switches.
I have experience soldering, I have a Raspberry Pi to play with from time to time. So, that shouldn't be a problem. I guess what's really worrying me is that I don't know what is compatible with what, like if I do my own combination of parts.
Dear anyone,
any idea that this 87 pcb will fit in a kmac2 ?
I am plannnig to desolder everything and use the original plate from kmac2 and move to this new pcb.
Any pics showing the difference between the lime green and dark green acrylic?
Also, will there be winkeyless top cover options?
..........
..........
Any pics showing the difference between the lime green and dark green acrylic?I am Witnessing Lime Green Middle Layer is Glorious for almost Every Combo.
Also, will there be winkeyless top cover options?
hi sprit!
i am still waiting patiently for your metal case pictures to be posted ;D
but i've been wondering how is the case's bottom going to be like?
is it a flat straight like First Blood case (needs feet for elevation)Show Image(http://i.imgur.com/obd5gwH.jpg)
or is it angled like kmac's case?Show Image(http://cdn.shopify.com/s/files/1/0267/1905/products/kmac22_1024x1024.jpg)
hi sprit!
i am still waiting patiently for your metal case pictures to be posted ;D
but i've been wondering how is the case's bottom going to be like?
is it a flat straight like First Blood case (needs feet for elevation)Show Image(http://i.imgur.com/obd5gwH.jpg)
or is it angled like kmac's case?Show Image(http://cdn.shopify.com/s/files/1/0267/1905/products/kmac22_1024x1024.jpg)
Hello! Justnits ! How are You?
" Both! " This will be a proper Answer? We are doing Pre-MOQ check, I am doing Patents and Design Registrations in the Korean Government.
It will show Soon! The Major Parts of My Design will be shared in GH, I promise!
will the QFR fit in this? I assume they are similar to the filco
I'm interested in this case, but I have a few questions!
1) Is the 87% keyboard universal? Or are you making a different case for Filco and a different case for Leopold?
2) Are you making a keyboard with a metal top plate and acrylic sides? If so... :o
Are the aluminum cases going to be layered like the acrylic or is it one whole piece.Hush! My Friend! :o ;)
I'm interested in this case, but I have a few questions!
1) Is the 87% keyboard universal? Or are you making a different case for Filco and a different case for Leopold?
2) Are you making a keyboard with a metal top plate and acrylic sides? If so... :o
You can Read this Topic and Order Form. I guess You Will find a Solution For You!!
You can Read this Topic and Order Form. I guess You Will find a Solution For You!!
Your order form says "you can change your order at any time".. how do I do this? I need to update my 87% case order to reflect that I need it fit an 87% Ducky/Filco.
Or do I just submit another order?
A new order form sent XD
The Thanks Giving Day in USA ? :)
The Thanks Giving Day in USA ? :)Thanksgiving is a week from today Thursday the 28th
pleeeeeeeeeeeease post the aluminum case already!
Sprit, what do you have me down for? I submitted a new order but I'm not sure what I actually signed up for :p
i see the deadline is soon for this thing but i don't see picture of the aluminum case in OP yet(interested in a 60% case for my poker), I would love to see if its a nice style.Spirit's going to do a second wave of both PCB & case GBs, is the general understanding. Looks like aluminum will be part of that second wave, along with the ALPs PCBs
Does anyone know what the closure mechanism will be for these acrylic cases? are there going to be bolts visible form the top like most of the acrylic cases I have seen, or are they going to have a magnetic closure like some others that I have seen floating around?
i see the deadline is soon for this thing but i don't see picture of the aluminum case in OP yet(interested in a 60% case for my poker), I would love to see if its a nice style.
Very excited for the hard anodized alu TKL case. ;D
Will the metal case be in two pieces or would it come in layers?
It would be really nice to be able to do something like this:Show Image(http://i.imgur.com/7HA1KVs.jpg)
It is 100% High Density Dura-Alu Metal, Super-Hard Anodized,
It is 100% High Density Dura-Alu Metal, Super-Hard Anodized,
Do you mean that you are using duralumin (another name for some 2000 series aluminium alloys)?
WOW.. that looks sick. That's the metal case for this GB, correct?According to my pm I dont think so but there will be a GB later on this case! :)
Cope Break
New Alu Metal 87 TKL Comes - by Lewi and LinLin in KBDmania.
A Massive, Robust Design, A 87 Open Source PCB. For Korean Domestic GB Only For Now.
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Will there be a metal case available for a fullsized Filco?Yes it will but it will cost you $$$
what's the red case?
The Three Tenors
http://www.youtube.com/watch?v=_IeV6fy2lLs (http://www.youtube.com/watch?v=_IeV6fy2lLs)
(Attachment Link)
(Attachment Link)
what's the red case?
How can we order an 110% metal case? Pricing?
Hi Sprit,
Do you have pictures of the top cover for 87% and 110%?
Hi Sprit,
Do you have pictures of the top cover for 87% and 110%?
Yes! I will post them Tomorrow, I will take a Photo, Rainging here today.
Looking for a 75% metal case first, then 60%. I'm not sure if you will be doing these.
Can't wait for the pics.
i see the deadline is soon for this thing but i don't see picture of the aluminum case in OP yet(interested in a 60% case for my poker), I would love to see if its a nice style.Spirit's going to do a second wave of both PCB & case GBs, is the general understanding. Looks like aluminum will be part of that second wave, along with the ALPs PCBs
Sprit.
I only receive my pcb+plate invoice.
where is invoice for case ? :-[
The colors look pretty nice :DYup!
Will there be a MOQ for each available color on the metal cases?
:eek: woah, that's a lot. Hope we can all agree on a color :pI think it is 50 per form factor not per colour! So you can choose w/e you like! :P
Cool! The pictures are going to be up on the 28th.
Are the aluminum cases going to look similar to the acrylic ones in shape and size?
Plz give us pics of the alu case! Enough with the tease!Cool! The pictures are going to be up on the 28th.
Are the aluminum cases going to look similar to the acrylic ones in shape and size?
Some Same, Some differ = ?? I dont Know.... All Versatile, All Mix n Match.... Many Variations.
(Attachment Link) (Attachment Link) (Attachment Link)
Sorry! The Order Confirm/ Invoice is Slow!!
Sorry! The Order Confirm/ Invoice is Slow!!
Did the 60% meet moq? ???
Still no invoice/confirmation received yet :(
Paid! Will you be shipping everything at once? (including PCB, LEDs)Hello! Yes Sir ! I am busy on my Job. Shipping Will go Altogether!
Hey Sprit,
I received 3 invoices (#'s 1231, 1232, & 1247), though I only wanted 2 cases. I wanted:
- 1 87% filco case: clear/frost/clear
- 1 75% case: frost/clear/frost
#'s 1231 & 1232 are both for $82.40
# 1247 is for $72.10
Which invoices should I pay?
I assume #1247 is for the 75% case. Which $82.40 invoice is the filco 87% clear/frost/clear case?
Hi Sprit, I also got 3 invoices. Two for the PCB GB (1276, 1041) and one for the case GB (1222). Both PCB and case invoices details are different from what I had ordered though. :(
I did order a 60% case (top white, middle lime green, bottom green) but invoice #1222 shows 1x 110% Acryl Case - $85.
Just paid invoice #1276!
Hi Sprit brother.Yes, You can ! :)
Good morning.
Can I choose matte or shining of acrylic surface?
I ordered white/frosty/white
The white color can make into matte surface?
감사합니다 Brother.
Please help me change it !Hi Sprit brother.Yes, You can ! :)
Good morning.
Can I choose matte or shining of acrylic surface?
I ordered white/frosty/white
The white color can make into matte surface?
감사합니다 Brother.
I need a Better Setup my Papal Account with My Bank, So Please wait Your Payment untill Tomorrow. :thumb:
I will tell you when It is Ready ! ;)
paid for casing.Very OK! :)
Is it ok ? :(
Hey Sprit,
I received 3 invoices (#'s 1231, 1232, & 1247), though I only wanted 2 cases. I wanted:
- 1 87% filco case: clear/frost/clear
- 1 75% case: frost/clear/frost
#'s 1231 & 1232 are both for $82.40
# 1247 is for $72.10
Which invoices should I pay?
I assume #1247 is for the 75% case. Which $82.40 invoice is the filco 87% clear/frost/clear case?
OK! at least You got 2 invoices. I will check 1247 !! PCB + Plate Order Form is Very Very Long ;)
Hi Sprit brother.Yes, You can ! :)
Good morning.
Can I choose matte or shining of acrylic surface?
I ordered white/frosty/white
The white color can make into matte surface?
감사합니다 Brother.
Can you please also note the matte finish for my cases?Your finish is matte ! As You note! :)
I'd like my case to be in matte as well if possible, thanks :)Can you please also note the matte finish for my cases?Your finish is matte ! As You note! :)