IMPOTANT : Stabilizer inserts are glued on the key.
Keycaps are made by Signature Plastics.
Esc and tilde rows are SP's SA row 2.
Tab, Caps Lock, Shift and bottom rows are SP's SA row 3 .
Please be careful with profile if you mix with other SA keycaps (e.g. from Round 4)
Is the ISO not only for JP?
There is a mention to 108 keys...
[ key and ] key are upside-down and reversed in first pic of OP. :eek:Should probably include this in the op
IMPOTANT : Stabilizer clips are glued. We can't separate them from keycap. (Maybe we don't need to do this.)
Why do this when there is Round 5 and Penumbra, both are same SA profile.
Why do this when there is Round 5 and Penumbra, both are same SA profile.
Its pretty much 1:1 aud:USD right? Maybe I'm missing where a full set at close to $100 shipped is cheap. Cheap would be the taobao ones lol
So these are only good for costar stabilizers right?
So these are only good for costar stabilizers right?
so no need plastic on stab for SP keycap right :))
Why do this when there is Round 5 and Penumbra, both are same SA profile.
Some people like white on black keycaps. They go well with just about any color keyboard case. And there is no waiting for these to be manufactured.
Also, R5 has no HONEY/ALPHA/BLACK, so this is your only option for an all-black set.MoreIts pretty much 1:1 aud:USD right? Maybe I'm missing where a full set at close to $100 shipped is cheap. Cheap would be the taobao ones lol
Depends on what your definition of cheap is. I feel that ~$100 is pretty much standard for a full set. Neither cheap nor expensive. :)
So these are only good for costar stabilizers right?
This part cannot be removed.http://www.diatec.co.jp/image_prod/SPKCS_space03.jpg
There is a possibility that the parts may be damaged as shown in the picture right when you try to pry. Please never stop.
So these are only good for costar stabilizers right?
You could probably break the stabilizer inserts out of the keycaps, even if they are glued.so no need plastic on stab for SP keycap right :))
wut?
Yes. FILCO saysQuoteThis part cannot be removed.http://www.diatec.co.jp/image_prod/SPKCS_space03.jpg
There is a possibility that the parts may be damaged as shown in the picture right when you try to pry. Please never stop.
I'm a fan of this keyset, but I'm curious why you are only accepting gift payments?
He probably means Paypal Fee, not Paypal Gift Fee.I'm a fan of this keyset, but I'm curious why you are only accepting gift payments?
Why would there be a fee if paying by paypal gift?? The buyer pays that by default....that makes no sense to charge for it again.
If you mean paying the paypal fees because people are paying as goods then that makes sense.
well do you have physical store in Sydney at the moment? If possible I'd like to visit ur store cz I live in Sydney XD
I'm a fan of this keyset, but I'm curious why you are only accepting gift payments?
NEVER EVER SEND YOUR PAYMENT AS GIFT WHEN YOURE BUYING SOMETHING, THATS MEAN YOU CANT REQUEST A REFUND!
MOREOVER, THE SELLER'S PAYPAL ACCOUNT WILL BE GET LOCK EASILY BECAUSE OF A LARGE AMOUNT OF GIFT PAYMENT.
BEWARE OF IT!
PRICE: $70AUD + Shipping (from Sydney, Australia) - as GIFT GIFT GIFT pleaseNEVER EVER SEND YOUR PAYMENT AS GIFT WHEN YOURE BUYING SOMETHING, THATS MEAN YOU CANT REQUEST A REFUND!
MOREOVER, THE SELLER'S PAYPAL ACCOUNT WILL BE GET LOCK EASILY BECAUSE OF A LARGE AMOUNT OF GIFT PAYMENT.
BEWARE OF IT!
I hate to say this, can you please write in lower case. This is quite rude of you. I've been asking the customer to add 3.41% rate as GOODS payment, however many people find it so confusing, thus I changed to this.
PRICE: $70AUD + Shipping (from Sydney, Australia) - as GIFT GIFT GIFT pleaseNEVER EVER SEND YOUR PAYMENT AS GIFT WHEN YOURE BUYING SOMETHING, THATS MEAN YOU CANT REQUEST A REFUND!
MOREOVER, THE SELLER'S PAYPAL ACCOUNT WILL BE GET LOCK EASILY BECAUSE OF A LARGE AMOUNT OF GIFT PAYMENT.
BEWARE OF IT!
I hate to say this, can you please write in lower case. This is quite rude of you. I've been asking the customer to add 3.41% rate as GOODS payment, however many people find it so confusing, thus I changed to this.
NOTE: Please payment in Australian Dollar
DEADLINE: 6/12/2013
:rolleyes:
It seems to me you are to say that I am running a scam or something here. Very rude, don't have you a proper manner?
It seems to me you are to say that I am running a scam or something here. Very rude, don't have you a proper manner?
It's just you are a newcomer here on Geekhack hence people here are very cagey and insecure about trusting you. There have been rip-offs in the past so 100% trust has to be earned rather than expected when it comes to organizing Group Buys here.
Don't feel offended because that's just human nature, once you have conducted a successful "Group Buy", then expect more people to flock to you to get more goods. But if it turns nasty then this place can be quite horrid for the corrupt and dirty. Just be aware of that :thumb: .
I am fully aware of scam are everywhere but again I do not condone his agressive tounge
I wish it had a Tsagan kit to it
Hi TS, can't access the order form. I'll like to give this GB a try. Great pricing compared to what i found elsewhere.
Hi TS, can't access the order form. I'll like to give this GB a try. Great pricing compared to what i found elsewhere.
try again
Done. Paid.
dayum, i'm late.....
if anyone wants to cancel, i will gladly take over their order :)
Any status updates ?
My friend got the 5 sets and just arrived in Melbourne, will have her take photo and ship on Monday
My friend got the 5 sets and just arrived in Melbourne, will have her take photo and ship on Monday
If that means they have all arrived here in Oz than it's good. Just make sure the goods are shipped as soon as possible to everyone who has paid.
Let us know if and when anymore fancy "Filco" Housings are up for sale. It seems they all disappear before you can even choose which casing you want, I just hope the ones that got chosen are enjoying their installation on their keyboards.
Bump, shipment has arrived, I will post out to 4 of payee today. The quality of this product is superb, thick and robust
Yes, it seems to me that the market does not respond positively to the custom case products. It's not surprising to see Filco stop selling it in near future.
At the PO, waiting for my turn, going to ship out all 4. merry xmas!
thanks for the update joneslee85, hopefully they'll arrive here until the end of the year, merry Christmas to you mate!
btw. do they have any sort of tracking? :)
thanks for the update joneslee85, hopefully they'll arrive here until the end of the year, merry Christmas to you mate!
btw. do they have any sort of tracking? :)
Nope, no tracking. The tracking option cost $60 -> $67 AUD, ridiculously expensive
Received mine today. thanks
I received mine yesterday. They are great! Thanks so much for running this GB!
i have received mine today, but i was at work....i have just put them on my filco and MAN! dat SA profile feels completely different to the OEM that filco uses by default. this is gonna take some getting used to :)
on the material side, these feel som much better than stock filcos, wow
potato pics incoming :)
thanks joneslee85 for organizing this :thumb:
I thought they were brown.
I thought they were brown.
I'm looking at mine at this very second......they're totally Black and White. But with old man eyes everything is B&W these days 8) .
out of curiosity, are these PBT or ABS?
I did order 2 extra but all sold unfortunately, if there are more interests, I'll be running another GB