Mostly you could do that, but WASD don't carry bottom row 1.5 size needed for Ctrl keys, and no one aftermarket anywhere has the odd custom spacebar size this keyboard use.Are you saying I can't get a spacebar for this keyboard? :s
That's right. It uses a non standard size spacebar that is not presently available anywhere. Other standard size may fit, but there will be small gap on each side.Well ****. What does other people do? I believe I've seen others with a good looking spacebar?
That's right. It uses a non standard size spacebar that is not presently available anywhere. Other standard size may fit, but there will be small gap on each side.Well ****. What does other people do? I believe I've seen others with a good looking spacebar?
That's right. It uses a non standard size spacebar that is not presently available anywhere. Other standard size may fit, but there will be small gap on each side.Well ****. What does other people do? I believe I've seen others with a good looking spacebar?
Corsair uses the same size spacebar, 6.5x, so you can do what I did and cannibalize the nice, textured spacebar they use, but otherwise even SP doesn't carry that size.
Every other key should fit; I use the TK and getting a replacement set was no issue. The only problem is the bottom row, haha.
That's right. It uses a non standard size spacebar that is not presently available anywhere. Other standard size may fit, but there will be small gap on each side.Well ****. What does other people do? I believe I've seen others with a good looking spacebar?
Corsair uses the same size spacebar, 6.5x, so you can do what I did and cannibalize the nice, textured spacebar they use, but otherwise even SP doesn't carry that size.
Every other key should fit; I use the TK and getting a replacement set was no issue. The only problem is the bottom row, haha.
By cannibalize, you mean paint it myself? Also, is the whole bottom row difficult to find keys for?
And if I may ask politely, can I see your keyboard?
That's right. It uses a non standard size spacebar that is not presently available anywhere. Other standard size may fit, but there will be small gap on each side.Well ****. What does other people do? I believe I've seen others with a good looking spacebar?
Corsair uses the same size spacebar, 6.5x, so you can do what I did and cannibalize the nice, textured spacebar they use, but otherwise even SP doesn't carry that size.
Every other key should fit; I use the TK and getting a replacement set was no issue. The only problem is the bottom row, haha.
By cannibalize, you mean paint it myself? Also, is the whole bottom row difficult to find keys for?
And if I may ask politely, can I see your keyboard?
Just meant that it'd be a nicer spacebar, it's textured and made of a nice material. Most sets will have a few matching keys, but not all, on the bottom row. Here's a picture of mine.Show Image(http://imageshack.us/a/img823/7187/bbc9.jpg)
So you actually found a spacebar that fits fairly well?
Also, are you then unable to swap out the remaining "normal" keys?
If you get keycap from Cherry/GMK or Signature Plastics you can replace every key but the spacebar. There are also a couple very limited choice that have all the correct keysizes even the spacebar now from Max (http://www.maxkeyboard.com/max-universal-black-translucent-mechanical-keyboard-keycap-set.html).
Danish Cherry will be super difficult to source (except perhaps lasered) but you could get lucky. There have been a very few SP sets with additional language add ons done which may be possible to get a hold of like those of round4 (http://deskthority.net/wiki/Round4_Pricelist) or maybe round5 (http://deskthority.net/wiki/Round_5) but I think it's closed?
Danish Cherry will be super difficult to source (except perhaps lasered) but you could get lucky. There have been a very few SP sets with additional language add ons done which may be possible to get a hold of like those of round4 (http://deskthority.net/wiki/Round4_Pricelist) or maybe round5 (http://deskthority.net/wiki/Round_5) but I think it's closed?
Even if I just want plain keys, with no letters or numbers on?
Danish Cherry will be super difficult to source (except perhaps lasered) but you could get lucky. There have been a very few SP sets with additional language add ons done which may be possible to get a hold of like those of round4 (http://deskthority.net/wiki/Round4_Pricelist) or maybe round5 (http://deskthority.net/wiki/Round_5) but I think it's closed?
Even if I just want plain keys, with no letters or numbers on?
If you want blank keys, you can get those with absolute ease. Those wouldn't be Danish, they'd just be ISO like any other keyboard.
Danish Cherry will be super difficult to source (except perhaps lasered) but you could get lucky. There have been a very few SP sets with additional language add ons done which may be possible to get a hold of like those of round4 (http://deskthority.net/wiki/Round4_Pricelist) or maybe round5 (http://deskthority.net/wiki/Round_5) but I think it's closed?
Even if I just want plain keys, with no letters or numbers on?
If you want blank keys, you can get those with absolute ease. Those wouldn't be Danish, they'd just be ISO like any other keyboard.
That's what I was thinking, since it seems much easier, and I also like that look. The question is if I have to buy 2 or 3 different sets/packages, since I have QuickFire TK, which in itself is complicated, but it is also ISO layout?
Danish Cherry will be super difficult to source (except perhaps lasered) but you could get lucky. There have been a very few SP sets with additional language add ons done which may be possible to get a hold of like those of round4 (http://deskthority.net/wiki/Round4_Pricelist) or maybe round5 (http://deskthority.net/wiki/Round_5) but I think it's closed?
Even if I just want plain keys, with no letters or numbers on?
If you want blank keys, you can get those with absolute ease. Those wouldn't be Danish, they'd just be ISO like any other keyboard.
That's what I was thinking, since it seems much easier, and I also like that look. The question is if I have to buy 2 or 3 different sets/packages, since I have QuickFire TK, which in itself is complicated, but it is also ISO layout?
You shouldn't have to get more than one. The normal, non-bottom row keycaps are all the same, so one set would cover you for that without a problem, and you'll get a few matching bottom-low keys, so don't worry about that. If you want the extra keys you could buy everything but the spacebar from Signature Plastics. I suggest to just get a 104-key set to cover the numpad, and then forget about the extra few bottom-row keys unless you really don't like them.