geekhack
geekhack Community => Keyboards => Topic started by: kansas city shuffle on Sat, 25 January 2014, 14:56:29
-
Howdy all,
I am in the market for picking up a 10 keyless keyboard, I am leaning towards either the -
Topre Realforce 87U 10 keyless
http://elitekeyboards.com/products.php?sub=topre_keyboards,rftenkeyless
or
Filco Majestouch 2 MX Brown 10 keyless
http://www.amazon.com/Filco-Majestouch-2-Tenkeyless-FKBN87M-EB2/dp/B004WOF7QM
Any other selections I should be aware of that you would recommend? Opinions?
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
-
filco tkl should be $150 tops..
-
filco tkl should be $150 tops..
Right, good to know, now need to find a dealer in the US.
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
have you tried cherry mx switches yet?
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
have you tried cherry mx switches yet?
Yes, have the MX blues Majestouch 2 and Realforce 104U, looking to go slim down but am open to hearing about other brands I may not be aware of.
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
have you tried cherry mx switches yet?
Yes, have the MX blues Majestouch 2 and Realforce 104U, looking to go slim down but am open to hearing about other brands I may not be aware of.
the only other one out there is ducky.. all the others are "g4m3r brands" and have a bit of fluff...
I think ur probably ready for a custom.. hit up the GBs...
Of course I personally recommend the Egdx.. but..... if you must have rectangles, the gh60 / phantom's always there.
-
cm storm quick fire rapid. i like mine a lot
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
have you tried cherry mx switches yet?
Yes, have the MX blues Majestouch 2 and Realforce 104U, looking to go slim down but am open to hearing about other brands I may not be aware of.
If you have a RealForce already, so you really like it? A lot of people who try Topre say they can't ever go back to anything else. If that is the case, get another RealForce :)
Otherwise, QFR or Ducky would be a strong contender to a Filco.
You might also keep a look-out for the CM Novatouch keyboard, probably coming out soon - Topre with MX-compatible stems.
-
For affordability, a QFR is a great choice because of its quality (relatively) and price, especially on sale. My favorite at the moment, though, is Ducky; great build quality and some amazing light modes (as well as key repeat) on their Shine series, as well as thick PBT keycaps on their special editions.
-
Those are two really good keyboards but they both use different switches, so I'd say which ever switch you like more, get that one.
Any recommendations for other brands?
have you tried cherry mx switches yet?
Yes, have the MX blues Majestouch 2 and Realforce 104U, looking to go slim down but am open to hearing about other brands I may not be aware of.
If you have a RealForce already, so you really like it? A lot of people who try Topre say they can't ever go back to anything else. If that is the case, get another RealForce :)
Otherwise, QFR or Ducky would be a strong contender to a Filco.
You might also keep a look-out for the CM Novatouch keyboard, probably coming out soon - Topre with MX-compatible stems.
Yep, I am using the RealForce now, over my Filco MJ2 blues and IBM Model M, just wanted to solicit some opinions and see what's out there. I'll most likely pick up a RF 87U. Never tried the MX Browns, how does that stack up against the blues? Same experience minus the clacky?
-
browns suck compared to blues. don't even bother going that route.
it's a half assed switch that doesn't know if it's linear or tactile
-
Yeah.. probably either go with the RF 87U, or if you want to go even smaller, the HHKB Pro
-
browns suck compared to blues. don't even bother going that route.
it's a half assed switch that doesn't know if it's linear or tactile
Here we go, this is the type of opinion I want to hear. I'll keep that in mind...cheers!
-
browns suck compared to blues. don't even bother going that route.
it's a half assed switch that doesn't know if it's linear or tactile
Here we go, this is the type of opinion I want to hear. I'll keep that in mind...cheers!
Switch preference is all personal opinion. A lot of people like browns.
I'm not one of them and personally agree with everything demik said, but hey I hate blues to.
-
Any opinions on the Leopold ten keyless? Or is that considered inferior to the Filco MJ2 ten keyless?
-
which leopold? fc700 or 200?
haven't used the 700, but my main problem with it is the non standard spacebar. say good bye to switching your keycaps and including the spacebar.
i also had some disconnection issues when i owned a 200, but the person i sold it to never had that problem (don't worry, i let him know the problem it had).
-
Any opinions on the Leopold ten keyless? Or is that considered inferior to the Filco MJ2 ten keyless?
The Leopold is a great boars. You need to keep in mind that they use Cherry stabilizers. The 700R also comes with fairly rough PBT keycaps. Other than that, they're pretty similar.
-
Any opinions on the Leopold ten keyless? Or is that considered inferior to the Filco MJ2 ten keyless?
The Leopold is a great board. You need to keep in mind that they use Cherry stabilizers. The 700R also comes with fairly rough PBT keycaps. Other than that, they're pretty similar.
-
Like said earlier, switch preference is personal. It'd be best to try a full board, but if not there are switch testers and samples out there. I think brown switches are fine. I'd get a board with them if I was concerned about noise. Otherwise I prefer blues.
-
If you like your 104U then buy the Elite Keyboards All 45G Weight RealForce! It is worth the $240 but for some crazy reason they dropped it under $200. Such a steal! :D
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
-
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
I see what you mean. It's slightly overpriced in my opinion, and I wouldn't get a standard TKL MX board for that price, it just is no different than any other TKL board. Maybe if it was somewhere like $120 or so it would be reasonable.
-
Cheers all, I've ordered a RealForce 87U White, thanks for all the feedback and opinions! :thumb:
-
Cheers all, I've ordered a RealForce 87U White, thanks for all the feedback and opinions! :thumb:
Nice choice, did you go for the 55 gram one or the one with different weights across the letter area?
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
Ive seen them for 150 in classifieds a couple of times let alone theyre only 199 right now... not seeing the joke when its a legitimate price
-
you're comparing buying used to buying new. not a valid comparison the slightest.
-
you're comparing buying used to buying new. not a valid comparison the slightest.
Youre misunderstanding. They are new for 199 as we speak right now. In a purchase as big as a realforce compared to a filco, im sure that 50 dollar difference is minimal. Hence my comparison.
-
you're comparing buying used to buying new. not a valid comparison the slightest.
Youre misunderstanding. They are new for 199 as we speak right now. In a purchase as big as a realforce compared to a filco, im sure that 50 dollar difference is minimal. Hence my comparison.
It's actually quite large. Perhaps you're well off and it doesn't matter to you, but spending $120 on a Filco (or often <$100 for used, compared to almost no reduction in used Topre boards) is a huge difference from spending about twice that on a Topre board.
-
you're comparing buying used to buying new. not a valid comparison the slightest.
Youre misunderstanding. They are new for 199 as we speak right now. In a purchase as big as a realforce compared to a filco, im sure that 50 dollar difference is minimal. Hence my comparison.
It's actually quite large. Perhaps you're well off and it doesn't matter to you, but spending $120 on a Filco (or often <$100 for used, compared to almost no reduction in used Topre boards) is a huge difference from spending about twice that on a Topre board.
No we are talking about a 150 dollar filco. This is why this started. Now you say that used boards have no place in this conversation and now you compare them. It has nothing to do with being well off. You took a 150 to 200 dollar comparison and tried to make it a <100 to 200 comparison. You cant possibly say I cant bring a used topre into the equation and then bring a used filco in... the original statement still stands. The difference between the new filco that OP referenced and the realforce is 50 dollars. If youre picking up this mech keyboard hobby, you have spending money. My original statement said that if I was spending 150 on a filco (like the one OP referenced) that id rather buy a realforce. Surely you could say that a used filco would be less but I also say a used topre could be as well. I was only telling you it wasnt a joke. Case closed. Enjoy your day. :thumb:
-
if $50 breaks your bank you probally shouldn't buy a $150 board anyways
-
if $50 breaks your bank you probally shouldn't buy a $150 board anyways
You say that more than a 30% raise on the price on an already expensive keyboard is small amount? Or that the Realforce is more worth it I don't understand...
-
if $50 breaks your bank you probally shouldn't buy a $150 board anyways
You say that more than a 30% raise on the price on an already expensive keyboard is small amount? Or that the Realforce is more worth it I don't understand...
Just that theyre both expensive and that it wouldnt be wrong to pay 50 more on a highly regarded board
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
Ive seen them for 150 in classifieds a couple of times let alone theyre only 199 right now... not seeing the joke when its a legitimate price
What? Show me a legitimate Realforce that's not half-dead for $150 (not including the Type Heaven) and I'll accept it as truth. Until then, make less bad jokes please.
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
Ive seen them for 150 in classifieds a couple of times let alone theyre only 199 right now... not seeing the joke when its a legitimate price
What? Show me a legitimate Realforce that's not half-dead for $150 (not including the Type Heaven) and I'll accept it as truth. Until then, make less bad jokes please.
Dont be naive, if the new one is coming in at 199, and youve used one for a couple of months and had to sell it, what would you list it at reasonably? Also please dont digress to previous comments when were in mid conversation. I explained all of my points thoroughly.
-
$175. the selling point of topre is to be able to resell it for next to no loss.
please show this 150 board you said you saw.
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
Ive seen them for 150 in classifieds a couple of times let alone theyre only 199 right now... not seeing the joke when its a legitimate price
What? Show me a legitimate Realforce that's not half-dead for $150 (not including the Type Heaven) and I'll accept it as truth. Until then, make less bad jokes please.
Dont be naive, if the new one is coming in at 199, and youve used one for a couple of months and had to sell it, what would you list it at reasonably? Also please dont digress to previous comments when were in mid conversation. I explained all of my points thoroughly.
While I get your point I have to agree with him that they never go that low, on the other side I have seen recently a Filco for 85 shipped.
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
This is the "joke" we have at hand here. I said if I am spending 150 for a filco.... id rather rather spend the 199 on a brand new realforce... show me the joke. This is getting out of hand.
-
$175. the selling point of topre is to be able to resell it for next to no loss.
please show this 150 board you said you saw.
The 25 dollar difference is enough to be worlds apart apparently. Could you honestly say that youd spend 150 on a filco instead of a 175 (as you put it) realforce? Thats the point. Its not outrageous.
-
Cheers all, I've ordered a RealForce 87U White, thanks for all the feedback and opinions! :thumb:
Good choice sir!!!!! :thumb:
-
$175. the selling point of topre is to be able to resell it for next to no loss.
please show this 150 board you said you saw.
The 25 dollar difference is enough to be worlds apart apparently. Could you honestly say that youd spend 150 on a filco instead of a 175 (as you put it) realforce? Thats the point. Its not outrageous.
you're comparing buying used to buying new. not a valid comparison the slightest.
-
$175. the selling point of topre is to be able to resell it for next to no loss.
please show this 150 board you said you saw.
The 25 dollar difference is enough to be worlds apart apparently. Could you honestly say that youd spend 150 on a filco instead of a 175 (as you put it) realforce? Thats the point. Its not outrageous.
i'm not sure at any point in time did i say anything about the value of a filco being worth it at $150.
i just said that expecting a realforce at $150 was funny.
-
$175. the selling point of topre is to be able to resell it for next to no loss.
please show this 150 board you said you saw.
The 25 dollar difference is enough to be worlds apart apparently. Could you honestly say that youd spend 150 on a filco instead of a 175 (as you put it) realforce? Thats the point. Its not outrageous.
i'm not sure at any point in time did i say anything about the value of a filco being worth it at $150.
i just said that expecting a realforce at $150 was funny.
But at 175 its not?
-
that's a 50% difference. imo, that's significant. also in line with what rfs sell for (retail - $25)
-
that's a 50% difference. imo, that's significant. also in line with what rfs sell for (retail - $25)
50% of what? Its a $25 difference.
-
browns suck compared to blues. don't even bother going that route.
it's a half assed switch that doesn't know if it's linear or tactile
Funny you say that, I hate blues and love browns. To each their own..
-
filco tkl should be $150 tops..
woahhhh the price on that is nutty, for that much id rather buy a realforce
There's a reason that people pay $500+ for custom boards, because they're simple better than the standard. Same with Filco, it's relative build quality is supposed to be quite a bit higher than Realforce boards (subjectively, the case has a really ugly amount of extra bezel attached to it as well).
Its not so much the price of the Filco in general, just the fact that I've seen them in a bunch of other places for cheaper.
this is why ducky > filco when it comes to standard type boards. they're much more innovative and they charge you for it. much better than not beung innovative and charging you for their brand name.
also, i laughed at $150 realforce joke lol.
Ive seen them for 150 in classifieds a couple of times let alone theyre only 199 right now... not seeing the joke when its a legitimate price
What? Show me a legitimate Realforce that's not half-dead for $150 (not including the Type Heaven) and I'll accept it as truth. Until then, make less bad jokes please.
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
:rolleyes:
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
You're really not funny, and you should calm down.
Alright, way to be a ****. I even apologized for any harshness in our argument... and then after being proved wrong about a $150 realforce, you continue to be a ****. Good people to note in the community.
-
10 keyless keyboards? I only know of one (http://orbitouch.com) keyless keyboard...
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
:rolleyes:
Way to edit the rude remark out.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
You're really not funny, and you should calm down.
Alright, way to be a ****. I even apologized for any harshness in our argument... and then after being proved wrong about a $150 realforce, you continue to be a ****. Good people to note in the community.
First of all, stop thread crapping. Also, I edited the statement after I saw your apology, but I guess it doesn't matter to you.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
You're really not funny, and you should calm down.
Alright, way to be a ****. I even apologized for any harshness in our argument... and then after being proved wrong about a $150 realforce, you continue to be a ****. Good people to note in the community.
First of all, stop thread crapping. Also, I edited the statement after I saw your apology, but I guess it doesn't matter to you.
Ive been done with this thread. For some reason you continue to talk after providing two pages of false info. Instead of rubbing in your face that you were wrong, I made it light hearted by making a joke and you threw it in my face. Anything else you have to say to justify yourself can go to PMs.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
No, they really were that price.
Here (http://geekhack.org/index.php?topic=43854.0) is my thread from May-2013 where I was trying to find out where in Australia to get TKL keyboards.
The prices quoted were all correct at the time of posting.
And the post was not edited.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
You're really not funny, and you should calm down.
Alright, way to be a ****. I even apologized for any harshness in our argument... and then after being proved wrong about a $150 realforce, you continue to be a ****. Good people to note in the community.
First of all, stop thread crapping. Also, I edited the statement after I saw your apology, but I guess it doesn't matter to you.
Ive been done with this thread. For some reason you continue to talk after providing two pages of false info. Instead of rubbing in your face that you were wrong, I made it light hearted by making a joke and you threw it in my face. Anything else you have to say to justify yourself can go to PMs.
You're clearly wrong, as everyone in this thread has made clear. It's obvious that you're a rabid Thorpe fanboy and can't seem to get the idea that you're never wrong out of your mind. But I'm fine if you have the last word, because you're laughably wrong.
-
PCCG used to sell 87U RealForce for $179. That is AUD, which works out at about USD$160.
New.
Variable weight but.
I actually want to try a variable weight, seems a lot nicer than a uniform
But that price, darn. Cheaper than an FC660C?
But that price would be a "joke".......... ;D
You're really not funny, and you should calm down.
Alright, way to be a ****. I even apologized for any harshness in our argument... and then after being proved wrong about a $150 realforce, you continue to be a ****. Good people to note in the community.
First of all, stop thread crapping. Also, I edited the statement after I saw your apology, but I guess it doesn't matter to you.
Ive been done with this thread. For some reason you continue to talk after providing two pages of false info. Instead of rubbing in your face that you were wrong, I made it light hearted by making a joke and you threw it in my face. Anything else you have to say to justify yourself can go to PMs.
You're clearly wrong, as everyone in this thread has made clear. It's obvious that you're a rabid Thorpe fanboy and can't seem to get the idea that you're never wrong out of your mind. But I'm fine if you have the last word, because you're laughably wrong.
Okay all arguments aside because im assuming im confused about what the miscommunication was. All I was saying was that there are 150 dollar realforces out there like the price on the filco that OP linked. You said that its a funny joke to find one for that cheap and then rowdy said there was one for 150. What am I missing here? You keep calling me a thorpe fanboy for topre clown but I dont even own a topre :-[
-
OP was done two pages ago. Locking due to pointless bickering. :thumb: