geekhack
geekhack Marketplace => Classifieds => Topic started by: rockhawksam on Fri, 09 May 2014, 17:02:00
-
WTS: OG Dolch w free RGB Mods and some other random keys (cherries, cmyk ****)
$85 shipped!!
-
Bump
-
Bumpatron 3000
-
Price change bump
-
BuMp
-
Pics?
-
Pics?
updated with pics/thread bump
-
The vintage blues in the PAC-62s are nice. Much smoother than new blues.
-
Bump
The vintage blues in the PAC-62s are nice. Much smoother than new blues.
Agreed. They feel soooo goood.
Mod Edit: Please keep your bumps to every 24 hours minimum
-
Bump
-
Bumpular Unit 3000
-
"Naty P and the Treant Krew" is my rap name for Nature's Prophet in Dota (bump)
-
Bump :p :thumb:
-
WTB changed + bump
-
Bump with changed WTB and WTS
-
You need to set a price for your OG Dolch + GMK Dolch extension kit. :)
-
You need to set a price for your OG Dolch + GMK Dolch extension kit. :)
Yeah, oversight on my part. Fixed!
-
Bump!
-
Bump
-
Bump!
-
PM'd you about the white/beige sets.
-
Bump!
-
Bump!
-
Bump! Also leaving for a month so I will not be able to respond to any PM's until mid July after today!
-
Will you sell the dolch extension set by itself, and for what price shipped?
-
Will you sell the dolch extension set by itself, and for what price shipped?
I would certainly prefer to sell the whole set but I might do the extension kit for around $50 shipped
-
Bump!
-
PMd
-
Bumpamundo
-
I am aiming mostly for a trade but feel free to make an offer if you plan on doing a cash transaction.
$125 for the candy corn skull? It is MX right?
I prefer not to sell my CandyCorn Skull for $125. Do you have any clacks we could trade for instead? Not sure if you received my other messages since u suddenly stopped replying. :thumb:
-
I am aiming mostly for a trade but feel free to make an offer if you plan on doing a cash transaction.
$125 for the candy corn skull? It is MX right?
I prefer not to sell my CandyCorn Skull for $125. Do you have any clacks we could trade for instead? Not sure if you received my other messages since u suddenly stopped replying. :thumb:
pm'd/bump!
-
Bump!
-
Bump
-
Bumpatron 6000
-
Bump
-
Bump
-
Bump
-
Bump
-
WTB/WTTF:
Ribbits!
Julysicles
Candy Corn Skulls (MX)
Candy Corn 420s (MX)
Drunken Skulls (Topre)
3D skull
ANY CLACK/BB
COMING SOON FOR TRADE
GTX 670, Full Dolch Set w/extension and winkey, blue marble slow-fi and green on grey topre moose
-
Bump!
-
Bump!
-
Bump
-
Bump! Items added!
-
Bump
-
PM'd
-
got the specs on the ram? Timings i mean.
and is the EVGA card registered? warranty transferable?
-
got the specs on the ram? Timings i mean.
and is the EVGA card registered? warranty transferable?
1600 Mhz for the ram and the 670 has a transferable warranty.
-
Bump
-
Bump
-
What's the memory capacity of the RAM?
-
8GB its in the title sir.
-
8GB its in the title sir.
^
-
Bump
-
Bump
-
Bump
-
bump
-
Bump
-
Bump
-
bump
-
Bump
-
PM'd
-
b
-
bump
-
bump
-
Bump. added Octopink, HO and Mochi for trade
-
Bump
-
Bump
-
Bump
-
.
-
I want that octopink o.o want anyhting besides clacks?
-
I want that octopink o.o want anyhting besides clacks?
Depends on what it is, but for the most part I am looking for blank click clacks. What do you have to offer?
-
Bump
-
bump
-
Bump
-
bump
-
Bump
-
Bump
-
PM'd
-
:blank:
-
Bump
-
Bump
-
:thumb:
-
bump
-
bump
-
bump
-
Bump
-
Bump
Bump
-
Bump
Bump
bump
-
bump
-
Bump
-
Bump
-
Bump
-
bump
-
Bump
-
bump
-
bump
-
bump
-
bump
-
Bump
-
Wear on the desko?
-
Wear on the desko?
Very very little.
-
Don't really need the rgb. Willing to separate them for cheaper price? Already have a dye sub set.
-
Don't really need the rgb. Willing to separate them for cheaper price? Already have a dye sub set.
I'd go 140 for the normal set.
-
Nah I'm good. Thanks.
-
Gonna have to lower them prices, b.
-
Gonna have to lower them prices, b.
what would you reccomend? I've been out the game for quite some time now.
-
aren't the blanks $75 brand new?
-
aren't the blanks $75 brand new?
I remember buying them for way more, but I guess they are now! Price updated.
-
nice !
-
Bump
-
Hey there fellow Chicagoan,
Long shot, but don't suppose you have Imsto's Peacock set?
-
Hey there fellow Chicagoan,
Long shot, but don't suppose you have Imsto's Peacock set?
Nope, sorry! Got the desko if you're interested tho :p
-
bump now selling Viper
-
b
-
bump
-
Bump
-
bump
-
Bump Mochi now for sale
-
Bump
-
bump
-
bump?
-
I wish I had a spare 400 bones. GLWS.
-
Isn't 400$ for just the case pretty expensive?
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
-
If you do not have the right PCB and plate the case alone is pretty useless...
-
If you do not have the right PCB and plate the case alone is pretty useless...
Unless you're interested in hand wiring a custom plate, I need a case for that one day.
-
Isn't 400$ for just the case pretty expensive?
I think it's pretty fair but I'll definitely knock the price down if need be.
-
I wish I had a spare 400 bones. GLWS.
Thanks!
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
What do you think would be a more fair price?
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
What do you think would be a more fair price?
$200 shipped.
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
What do you think would be a more fair price?
$200 shipped.
:blank:
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
What do you think would be a more fair price?
$200 shipped.
I think that's honestly more than fair, possibly $200 + shipping but other than that I don't see myself ever justifying anything above that for just the case. Even then without the plate and pcb it will get a bit costly to have to get a plate cut and then to go through the trouble of hand-wiring it.
-
Isn't 400$ for just the case pretty expensive?
Yeah, it was $220 for the whole kit not counting shipping and fees. I would be all over this if the price wasn't so high, somebody will most likely pick it up.
What do you think would be a more fair price?
$200 shipped.
:blank:
As someone mentioned earlier, the full kit was $220. The most I would pay, just for the case, is $200.
And just for the record, I picked up a full Duck Viper kit, with stabs, a full cherry keyset, AND a clack for about the same price that you are trying to sell just the case for. I have seen multiple, fully assembled Vipers go for as much as you are asking, for just the case.
I don't mean to threadcrap, but my post is more or less a heads up to newer members that might not be aware how marked up your price is.
Granted, this case is on the rarer side of cases, that is still a hefty markup.
edit: I also picked up a mint Duck Mini v2 case for $160 from the classifieds.
-
This might be a dumb question but how hard will it be for the person who buys this to source a viper pcb and plate if they were to build it?
-
This might be a dumb question but how hard will it be for the person who buys this to source a viper pcb and plate if they were to build it?
that french guy is trying to get PCBs made IIRC
-
This might be a dumb question but how hard will it be for the person who buys this to source a viper pcb and plate if they were to build it?
that french guy is trying to get PCBs made IIRC
so basically there will be an additional $50-$75 for the pcb shipped and another $50-$75 for the plate shipped + switches to get the actual full keyboard build price estimate?
-
Bump
-
just wondering how you came to have a viper case w/o pcb? seems kinda useless w/o the pcb to go along with it..
-
just wondering how you came to have a viper case w/o pcb? seems kinda useless w/o the pcb to go along with it..
I burnt the PCB pretty bad during assembly :(
-
price change bump
-
just wondering how you came to have a viper case w/o pcb? seems kinda useless w/o the pcb to go along with it..
I burnt the PCB pretty bad during assembly :(
Do you still have said PCB, or did you throw it out?
-
just wondering how you came to have a viper case w/o pcb? seems kinda useless w/o the pcb to go along with it..
I burnt the PCB pretty bad during assembly :(
Do you still have said PCB, or did you throw it out?
still have it
-
just wondering how you came to have a viper case w/o pcb? seems kinda useless w/o the pcb to go along with it..
I burnt the PCB pretty bad during assembly :(
Do you still have said PCB, or did you throw it out?
still have it
Can you post a picture of the damaged region? Also do you still have the plate?
-
I really want to have one, but the problem is it seems to be impossible to find a suitable PCB and a plate.
Then it is meaningless if just buy a case....
-
bump!
-
Has it been sold already?
-
No pictures of the PCB i take it?
-
No pictures of the PCB i take it?
Trying to get them asap. It's a bit difficult as the PCB is at my dad's house. Sorry for the delay.
-
No pictures of the PCB i take it?
Trying to get them asap. It's a bit difficult as the PCB is at my dad's house. Sorry for the delay.
Ah no worries, looking forward to it :thumb:
-
hi i want to buy
-
bump
-
bump
Ever manage to get pics of the PCB?
-
bump
Ever manage to get pics of the PCB?
Hey! I totally forgot about taking pics (the PCB is sorta lost among recording equipment currrently.) I'm going to the studio tonight and I'll finally try to get some pics for you.
-
bump
Ever manage to get pics of the PCB?
Hey! I totally forgot about taking pics (the PCB is sorta lost among recording equipment currrently.) I'm going to the studio tonight and I'll finally try to get some pics for you.
No worries, looking forward to it!
-
down to buy if it comes with plate.
without a pcb is fine :O
-
bump
Ever manage to get pics of the PCB?
Hey! I totally forgot about taking pics (the PCB is sorta lost among recording equipment currrently.) I'm going to the studio tonight and I'll finally try to get some pics for you.
No worries, looking forward to it!
Hey man. I think the PCB may be lost unfortunately :( I couldn't find it at all among the heaps of equipment and soldering ****.
-
Bump
-
KMAC PCB bump!
-
pm for pcb
从我的 iPhone 发送,使用 Tapatalk
-
Bump
-
BUMP
-
Bu M p
-
Bump
-
Bump
-
bump
-
bump
-
bump
-
bump
-
pm'ing
-
BUY THIS PLEASE BUMP
-
New listing bump
-
Pming
-
PM'ed
-
PM sent via Tapatalk
Sent from my Pixel XL using Tapatalk
-
bümp
-
Any chance of splitting up the set? I need a TAB key for my Dolch Pac 60.