geekhack
geekhack Marketplace => Classifieds => Topic started by: strict on Wed, 21 May 2014, 17:59:44
-
Wanted (trade or buy)
- Realforce 87UB 45g "EK Edition"
- Topre Realforce 87 box, ideally the box for an 87USW (SE070S)
Trading
Selling
- Plenty of stuff coming soon ...
-
History
More
- Toxic BroBot Set - Topre (traded to iAmAhab)
- Toxic V2
- Ooze V2
(https://i.imgur.com/dT63OoNs.jpg) (https://i.imgur.com/dT63OoN.jpg) (https://i.imgur.com/XAVg3HFs.jpg) (https://i.imgur.com/XAVg3HF.jpg) (https://i.imgur.com/zk7s0Kis.jpg) (https://i.imgur.com/zk7s0Ki.jpg)
- IceStorm BBv2 - Topre (traded to trizkut)
(https://imgur.com/vTYlKNzs.jpg) (https://imgur.com/vTYlKNz.jpg)
- Fauxluminum BBv2 - Topre (traded to btctopre)
(https://imgur.com/yyqq4jys.jpg) (https://imgur.com/yyqq4jy.jpg)
- Conservative Red BBv2 - MX (traded to Psybin)
(https://i.imgur.com/h4TH67hs.jpg) (https://i.imgur.com/h4TH67h.jpg)
- Green Stump - Topre (traded to chive_)
(https://imgur.com/XZELsiYs.jpg) (https://imgur.com/XZELsiY.jpg)
- Blaze Blue Wrapped KWK - BS (traded to Sed8op8)
(https://imgur.com/piFpJWJs.jpg) (https://imgur.com/piFpJWJ.jpg)
- Massdrop ErgoDox PCBs with some extras - $35 shipped (sold to SpAmRaY)
- Includes the following items:
- MCP23018 I/O expander
- 2x 3.5mm TRRS connectors
- USB mini B connector
- USB mini B plug
- 0.1 UF ceramic capacitor
- 10x 220 Ohm 1/4w 5% resistors
- You will still need a case, a Teensy, switches, diodes, 2x 2.2K Ohm resistors, TRRS cable, and USB cable
(https://i.imgur.com/V6ykVpcs.jpg) (https://i.imgur.com/V6ykVpc.jpg)
- Assembled JD40 -
$150 $140 $130 shipped (CONUS only) (sold to admiralvorian)
- Stainless steel plates sanded with 320 grit to give brushed look
- Vintage black switches
- SIP sockets installed for Capslock LED
- White LED with 300 ohm resistor
- Costar 6.25x stabilizer - lubed with Krytox thick
- Super grippy clear vinyl bumpon feet
- Soldered with Kester 44
- I will even program it with the layout of your choice if you send me pictures of what you want
- Imgur album with some build process pictures (https://imgur.com/a/KEbUW)
- A: $20 (sold to loud_asian)
- Aluminum ANSI 125 Phantom plate
- Perfectly usable, no defects
- Surface sanded with 320 grit sandpaper
- Corrected design flaw where 2x stabilized switch tops could not be opened
- Stab cutouts beveled for Costar stabs (on the back of the plate)
- NOTE - if ordered alone this plate will be shipped with a garbage SS uTKL plate for rigidity of the shipping envelope
(https://i.imgur.com/IfKETK5s.jpg) (https://i.imgur.com/IfKETK5.jpg) (https://i.imgur.com/v7ug72bs.jpg) (https://i.imgur.com/v7ug72b.jpg)
- B: $35 (sold to jonathanyu)
- Stainless steel ANSI 150/7BIT hybrid plate
- Perfectly usable, no defects (I think this was a WFD plate?)
- Full F-row
- Split backspace
- Split right shift
(https://i.imgur.com/cePxBB4s.jpg) (https://i.imgur.com/cePxBB4.jpg)
- C: $30 (sold to Arcoril)
- Stainless steel ANSI 125 Phantom plate
- Perfectly usable, minor cosmetic defects
- Left LED hole is slightly enlarged and oblong but this is totally hidden once installed into a case
(https://i.imgur.com/6FlVrT7s.jpg) (https://i.imgur.com/6FlVrT7.jpg)
- D:
$25 $20 (sold to admiralvorian)
- Stainless steel ANSI 150 Phantom plate
- Perfectly usable, minor cosmetic defects
- Small laser cut marks in both bottom corners that are mostly hidden once installed into a case
- Some sticker/glue residue
(https://i.imgur.com/Y3OWe6vs.jpg) (https://i.imgur.com/Y3OWe6v.jpg) (https://i.imgur.com/TnZh7Gns.jpg) (https://i.imgur.com/TnZh7Gn.jpg) (https://i.imgur.com/fsoOTAXs.jpg) (https://i.imgur.com/fsoOTAX.jpg)
- E: $35 (sold to jonathanyu)
- Stainless steel 7BIT Phantom plate
- Perfectly usable, no defects
(https://i.imgur.com/297Fea2s.jpg) (https://i.imgur.com/297Fea2.jpg)
- F:
$15 $10 $5 $2 (sold to Thechemist)
- Stainless steel ANSI 150 Phantom plate
- Might be usable, significant defects
- Entire plate design shifted too far to the left, possibly usable depending upon case.
- Might make a good lube station?
(https://i.imgur.com/oi0NiSWs.jpg) (https://i.imgur.com/oi0NiSW.jpg) (https://i.imgur.com/8T21gMZs.jpg) (https://i.imgur.com/8T21gMZ.jpg)
- G:
$25 $20 (sold to kareed44)
- Stainless steel ANSI 150 Phantom plate
- Usable, mild cosmetic defect
- "P" switch hole has a goofy cut
- Switch can still be installed and defect is almost entirely hidden under switch lip
(https://i.imgur.com/cLiJYJPs.jpg) (https://i.imgur.com/cLiJYJP.jpg) (https://i.imgur.com/KFfEhmPs.jpg) (https://i.imgur.com/KFfEhmP.jpg)
- H:
$35 $30 (sold to nova779)
- Stainless Steel ANSI 150 Phantom plate
- Perfectly usable, no defects
(https://i.imgur.com/GFQVGZNs.jpg) (https://i.imgur.com/GFQVGZN.jpg)
- I: $3/ea + $2 shipping (sold to 00zer0)
- 19 Phantom novelty keys
- Thick PBT (as thick as GMK)
- Dye sublimated
- I ordered these literally to get one key for myself
(https://imgur.com/2MqjBaws.jpg) (https://imgur.com/2MqjBaw.jpg) (https://imgur.com/Yh02ZCOs.jpg) (https://imgur.com/Yh02ZCO.jpg)
- - Titanium Switch Tools (traded to lucaslink)
(https://imgur.com/dn5pVmIs.jpg) (https://imgur.com/dn5pVmI.jpg)
- Granite Set + Extras - $160 Shipped (Sold to JulienC)
- Set is essentially like new, common kit and icon mods have seen probably less than 3 hours of actual use. The other keys have seen zero usage at all. I got them thinking I might use them on a crazy layout keyboard I build someday but my keyboard interest is waning lately and I suspect that day will never come. Some keys were warped when I got them but I spent many painstaking hours gently adjusting them with a hair-dryer so everything should be as straight and true as an arrow now (something you won't get buying in a new round ...)
- Common Kit (minus "/r/mk" key)
- Icon Mods
- Icon Pro Mods
- Enter + Esc kit
- Partial Gamer Kit (Space Invader, All blue keys, All orange keys)
- 7u spacebar
(https://i.imgur.com/46JhpA0s.jpg) (https://i.imgur.com/46JhpA0.jpg)
- GID Skull - Topre (traded to slickmamba)
(https://imgur.com/z733rOqs.jpg) (https://imgur.com/z733rOq.jpg)
-
Both keys are still available
-
Come and get you some toxic :-*
-
Are you interested in trading for a toxic v2 mx?
-
Are you interested in trading for a toxic v2 mx?
If I'm totally honest, at this point I'm hesitant to trade for a lone toxic. My ideal trade would be for both a Toxic and an Ooze since I absolutely adore the pair together. My concern is that it might be more difficult going forward finding someone to trade a lone topre Ooze for an MX. If I don't have any offers for the pair in the next few weeks and you would still like to trade at that point I would definitely be open to it. I appreciate the offer though :thumb:
If someone else comes along and wants to trade a lone Ooze I will definitely take your offer for the toxic trade.
-
Updated the first post with some Fauxluminum deliciousness :cool:
-
(http://fcdn.mtbr.com/attachments/california-norcal/668864d1359601749-norcal-iipa-tasting-finding-pliny-killer-bmup.jpg)
-
up
-
I have both the toxics in mx and want topre. I'm not conus though.
-
I have both the toxics in mx and want topre. I'm not conus though.
I'll send you a PM shortly and we can work out the details. Thanks!
-
The toxic pair are now on a long journey to Norway :cool:
Now I just need someone who wants to trade for the Fauxluminum!
-
Bump
-
fyi
there are 2 ghost in the machine whites
me and girlshark each have one
-
fyi
there are 2 ghost in the machine whites
me and girlshark each have one
Thanks for the info! Im guessing one is topre and one is mx?
-
Updated the first post with some additional Bro's I would trade for after paging through the Bro Caps Gallery thread.
-
The two Toxic Bros from iAmAhab arrived safely today. He did a great job packaging them and I could not be happier having traded with him.
Hopefully my shipment from the US is delivered to you soon! :thumb:
-
Added a want to buy section.
I need some of that dsa granite pbt in my life! I'm looking for the Common Kit with Text Mods and I would love if I could get the blue Enter keys to go with it. If you have a set you're willing to part get in contact with me, I will happily pay their original cost + shipping (potentially a little more assuming new or like new condition).
-
Are you only looking for MX Bros?
-
Are you only looking for MX Bros?
That's correct, MX only
-
(http://i.imgur.com/TgjtT0b.gif)
-
Bumpage
-
Fauxluminum is pending. Dropped the Granite DSA keys from my WTB after reading about and seeing all the QC issues with this batch.
Now I'm looking for a black Phantom PCB and a GH60 PCB.
-
Bump ... surely there's a few unused black PCB phantom boards still left out there somewhere
-
Bump. Would really love to get my first clack! :thumb:
-
Bump. I could really use a black PCB phantom sometime soon. I'm getting a prototype of a stainless steel plate case made soon that will have an exposed PCB and I think a black phantom will end up looking much nicer than a white one. If it came down to it, I would buy a white one and pay to ship it to you in addition to paying for you to ship the black one to me.
I'm willing to bend on the unused requirement as long as you could show the PCB is exceptionally clean; no burnt traces, discoloration of the solder mask, scratches, etc
Ideally I would like to find the Rev 2 black PCB that has the bold key lettering and doesn't have the unnecessary 4 extra holes per switch. This one:
(http://geekhack.org/index.php?action=dlattach;topic=38441.0;attach=17302;image)
-
Still looking for that elusive black PCB Phantom :-X
-
Missed out on so many artisan keys for sale or trade the last couple days. Someone should break this horrible losing streak and sell me a Clack! :-*
-
Come on get in the boat, Clack. Come on get in the boat, Click Clack.
-
Maybe I should try doing a "jig" for a black phantom PCB, it seemed to work for the CC's :))
-
Added WTB for a Granite set Blue enter key pack. If you've got one you aren't using please let me know, I would be willing to pay above retail for it (assuming new or like new condition)!
-
Bumping. Also removed the Fauxluminum V2 as I'm pretty sold on the idea of getting a 55g Realforce.
-
Added my JD40 and ErgoDox PCBs.
It makes me really sad to sell the JD40, its a phenomenal board but I just cant adjust to anything less than TKL. I've got an imgur album with a bunch of pictures from the build process here (https://imgur.com/a/KEbUW). Do note though, that after some of these pictures were taken, I went through and cleaned up some of the soldering and wires on and around the Teensy so what you will receive will look even cleaner and nicer. I also swapped out the Cherry plate stab for a Costar plate stab since I could never get the Cherry stab to feel like anything other than garbage.
I'm selling the ErgoDox PCBs for basically the same reason, I've come to realize I'm really only interested in TKL boards.
-
Oooooh, gorgeous JD40. I wish I had the spare cash right now! Good luck with your sale.
-
Gahhhhhhhhhhh I really want one of these, but I can't get over the Shift being on the left :( I don't know why, but I never use the left side Shift.
EDIT: PM'd.
-
ErgoDox has been sold
-
Bump! If you buy the JD40 today I can have it shipped out first thing Monday morning and it should be in your hands before the end of the week :thumb:
-
Bump
-
Free bump, my things arrived very quickly and were packaged very well. Thanks again!
-
Sad jd40 ... All packaged up and no where to go!
-
(http://i.imgur.com/NKKwnNx.gif)
-
Bump
-
bumpbumpbump
-
Second price drop on the JD40 :-X
-
Still looking for a black phantom?
-
YGPM
-
JD40 has been sold!
Still looking for a black phantom?
Not at the moment, thanks for the offer though :thumb:
-
Bump
-
Hello strict,
If you can get the stainless steel wire 1.2mm, you DIY a 7.x Costar wire.
Here is what I tested on while ago when I was waiting for a case GB.
I tested on stainless steel wire 1.0mm, the tools that I used are :
+ a pair long nose pliers to straighten the wire by twisting the two ends.
+ a flat nose pliers to bend the corner, it is very effective in this case.
+ a heavy duty cutting pliers to cut the stainless steel wire
[attachimg=1]
* the middle is the DIY 7x Costar wire. It is imperfect but I believe we can tune it up depending on how picky we are. Note that the costing for doing this is very cheap (5m of 1.2mm stainless steel wire is only about 0.25 USD)
Hope it can help
-
Hello strict,
If you can get the stainless steel wire 1.2mm, you DIY a 7.x Costar wire.
Here is what I tested on while ago when I was waiting for a case GB.
I tested on stainless steel wire 1.0mm, the tools that I used are :
+ a pair long nose pliers to straighten the wire by twisting the two ends.
+ a flat nose pliers to bend the corner, it is very effective in this case.
+ a heavy duty cutting pliers to cut the stainless steel wire
(Attachment Link)
* the middle is the DIY 7x Costar wire. It is imperfect but I believe we can tune it up depending on how picky we are. Note that the costing for doing this is very cheap (5m of 1.2mm stainless steel wire is only about 0.25 USD)
Hope it can help
Appreciate the info but I was really hoping someone out there had a spare they wouldn't mind parting with.
I had definitely considered making one after watching Listers tutorial (https://www.youtube.com/watch?v=zry3CHNKgT8) but the only wire I can find locally is sold in 50ft spools and costs about $10. I would also have to get wire cutters that can handle that gauge ($10+) as well as a wire bender ($20). All told, I estimated my costs would be close to or above $40 just to get one stab wire for a layout I've never tried before (ANSI 150). I still may go this route if no one has a ready-to-go wire for sale and just make a whole bunch to sell to recuperate my investment.
-
Bump. Still looking for that 7x wire ... I missed out on one earlier in the week :'(
-
Bump
-
I seriously think I might start and interest check and possibly a group buy for 7x costar wires. These things are way too hard to find :confused:
-
I seriously think I might start and interest check and possibly a group buy for 7x costar wires. These things are way too hard to find :confused:
If you are going to do the IC and GB for Costar 7x, I would like to share the specification that I did for my prototype that I mentioned before.
Type of material: Stainless steel 304 wire
Size: 16 AWG (1.29mm)
Design
[attachimg=1]
Test prototype on 16AWG stainless steel wire
(http://i.imgur.com/eyWuALn.jpg)
Expected implementation problems:
+ 16 AWG Stainless steel 304 is very hard, as hard as hardened wire (music wire), so I don't think the E/Z Bender Wire Forming Tool (http://shop.dubro.com/p/e-z-bender-wire-forming-tool) can bend it.
+ It seems Costar manufacturer has CNC bending machine, so if we are going to bend the wire manually, the combination pliers, heavy nose pliers, heavy vise should be used.
+ The Z-bend in the middle is the hardest part.
+ Each Costar 7x wire will need at least 190mm material.
-
Bumping for new items - Phantom plates and Phantom PBT keys.
-
They don't look switch moddable - they're not, right?
-
They don't look switch moddable - they're not, right?
All the plates allow for switch top removal.
-
They don't look switch moddable - they're not, right?
All the plates allow for switch top removal.
I find them very interesting, since the switch removable plates I've seen so far have notches at the corners.
You don't have a pure 7 bit do you? (IE small spacebars, not the hybrid C or D in your listing)
-
I find them very interesting, since the switch removable plates I've seen so far have notches at the corners.
You don't have a pure 7 bit do you? (IE small spacebars, not the hybrid C or D in your listing)
There are much clearer hi-res photos of the designs for everything except plates A and B in my group buy thread. I think the design of plate A is the design you're used to seeing. I actually prefer jdcarpes design without the extra lip on the side because it's got less corners to get messed up during cutting, switch stability is virtually identical, and I think it looks cleaner/nicer.
Plate E is a pure 7BIT plate. Plate B is the only hybrid plate. Plates C and D are just regular 125 and 150 plates.
-
pmed
-
Will the plates fit on a ducky?
-
Will the plates fit on a ducky?
Negative, these plates do not have the necessary cutout for the controller.
-
bump ... surely someone out there wants to trade me their purple bro for one of these plates :cool:
-
Kind of surprised no one has bought any of my Phantom novelty keys yet
-
Bump
-
This is not the greatest bump in the world. No, this is just a tribute.
-
No ANSI 125 plates............................................... :( *sigh*
-
I'm debating posting a bunch of my Cherry stuff up here for sale (springs, stabs, switches, etc) after having fallen so much in love with Thorpe but it won't happen until these remaining stainless plates sell.
I've got the Topre bug so bad I'm even debating putting some of my MX novelties up to trade for Topre artisan keys :eek:
-
These lonely metal plates are still here looking for a nice PCB to settle down with :p
-
Are any of the usable phantom plates still available? I've always wondered too, when people put together phantoms with this layout, what case do they use? I do want one of these plates as I've been wanting to build this layout for a while. If those cases are still around that kind of just snap to the bottom of the plate, does anyone know where to get them? Or just anything that will work with this layout! Thanks!
-
Are any of the usable phantom plates still available? I've always wondered too, when people put together phantoms with this layout, what case do they use? I do want one of these plates as I've been wanting to build this layout for a while. If those cases are still around that kind of just snap to the bottom of the plate, does anyone know where to get them? Or just anything that will work with this layout! Thanks!
There's one mint ANSI 150 left and two usable ones with cosmetic defects. These 150 plates will work in most TKL cases but these are the most compatible with Filco. It will work with CoolerMaster cases and a few others with some slight modifications.
-
Lowered the price of all plates.
-
Spend some of that Christmas money you just got on one of my stainless plates!
-
Do you still have any of the plates with just minor cosmetic defects, if so I would love to buy one from you.
-
I'm debating posting a bunch of my Cherry stuff up here for sale (springs, stabs, switches, etc) after having fallen so much in love with Thorpe but it won't happen until these remaining stainless plates sell.
I've got the Topre bug so bad I'm even debating putting some of my MX novelties up to trade for Topre artisan keys :eek:
Sell me your 78g springs :eek:
-
Two plates down, two left to go!
-
One plate left!
-
Looking for a silenced 87 key Realforce. Black would be my preference since I could just pull the top off and drop it on my existing PCB with 55g cups and not have to pop out the plungers but a silenced white would be okay as well.
-
Updated first post with a ton of new stuff for trade. Hoping I can expand my collection of Topre clacks :)
-
b
bu
bum (heh)
bump
-
bump
bum (heh)
bu
b
-
I remember that you were looking for a 7x costar stabilizer and see that you removed it, did you find one? If so could you recommend a place to find one, I bent the one that I had and am in need of two.
-
I remember that you were looking for a 7x costar stabilizer and see that you removed it, did you find one? If so could you recommend a place to find one, I bent the one that I had and am in need of two.
Unfortunately I never actually found one. I eventually just gave up. :(
-
Well I am going to the store and purchasing a bender and some wire later this evening, if I can get one or two out of the fifty I'll probably have to make to even get it right I'll let you know.
-
bbuummpp
-
Still here, still bumping
-
Sent you a PM.
-
Sent you a PM.
Replied. Thanks! :)
-
Brump
-
I hope I get lucky with the Brobot sale so I can trade you for some of that cherry gear ;D
-
Seriously WTB a silenced RF87UB :cool:
-
Brrt
-
I haven't built a keyboard or modded any switches ever yet, but I still feel like I need that switch tool :o
-
Dropped the price on the F2 Phantom plate by half and changed up my WTB section a little bit.
-
Added
- conservative red mx bbv2
- stainless uTKL plate
- mint gum skull topre
- lubed and spring swapped gaterons
- pcb clears
Pretty soon Im going to be posting a kidney up in here trying to get a purple or blue mx bro :))
-
Would you be willing to sell the SS uTKL plate?
-
Would you be willing to sell the SS uTKL plate?
Sorry, only trading currently.
There seems to be a lot of interest in uTKL plates lately, maybe I should put together another GB soon ...
-
Is that messed up ansi 150 phantom plate still for sale?
-
Would you be willing to sell the SS uTKL plate?
Sorry, only trading currently.
There seems to be a lot of interest in uTKL plates lately, maybe I should put together another GB soon ...
Damn, all I have to trade is LL Bean gift cards lol. But yeah dude another groupbuy would be awesome, you should do an interest check. I'd buy two if it helped.
-
Is that messed up ansi 150 phantom plate still for sale?
Yep, still for sale.
-
apples and bananas
-
Everybody got a deal, I did it without one
-
When all is said and done, more is always said than done
-
Final price drop on the defective ANSI 150 plate. If no one wants it for this price its going in the garbage because I'm tired of looking at it.
-
IceStorm has now been spoken for.
I'm so close to having a full F-row rainbow of Bros I can taste it! :))
-
The good ones go, if you wait too long. So you should go, before you stay too long
-
Fauxluminum is now gone :thumb:
-
I think I'm addicted to macro pictures and sitting talkin' 'bout click clacks that we almost had
-
Been while since I bumped this
-
Bumpy road
-
Bumping for powder puff blue. I desperately want this key. If you have one please contact me as I would be willing to go to great lengths to complete my Easter trio set!! Including trading some of the stuff/keys not listed for trade.
-
First post updated.
I'm putting just about anything in my collection up to try to get a MX Powder Puff Blue BBv2. I desperately want to complete my Powder Puff Easter Set (https://imgur.com/fhRw5wu.jpg). If you have an MX Powder Puff Blue BBv2 PLEASE get in contact with me.
-
Finally sold the last Phantom plate. Now I just need someone to trade me a Powder Puff Blue BBv2!
-
Hello! Do you still have the orange with black eyes or purple bro?
-
Hello! Do you still have the orange with black eyes or purple bro?
Yep, Volcanic and Bro Purple are still available :thumb:
-
YGPM about springs
-
YGPM about springs
Responded :)
Sorry for the slow replies to PM's, Ive been pretty busy the last couple days and havent been on GH much.
-
Topre Stump gone!
-
Super good guy bump :thumb:
-
BS Blaze Blue Wrapped KWK gone!
-
Bump
-
Conservative Red now gone. Also some layout and listing changes to the first post.
-
B
BU
BUM
BUMP
BUM
BU
B
-
I know theres someone out there who wants to trade me their MX Powder Puff Blue ... I'm here to tell you I dont want it ... you can keep it. I dont want it at all. I definitely wouldn't even consider taking it if you offered it to me. Nothing you could say would make me want it.
:'( :'(
-
I know theres someone out there who wants to trade me their MX Powder Puff Blue ... I'm here to tell you I dont want it ... you can keep it. I dont want it at all. I definitely wouldn't even consider taking it if you offered it to me. Nothing you could say would make me want it.
:'( :'(
Oh well I was about to PM you but I guess I won't.
-
Yayyyyy fingers crossed for the powder puff blue v2 :thumb:
(http://875357559f655c0fd9842374.eventingnation.netdna-cdn.com/wp-content/uploads/2013/03/857774_Clap_gif2337cd94874249c739512e7509fae2ad.gif)
-
People who know the difference between good **** and bad ****, this is the house they come to ...
-
PMing
-
Commenting just so I can find this in a few weeks!
-
... Too long since this got bumped ...
-
Commenting just so I can find this in a few weeks!
just came by to say hello and do my my weekly drool over your KbK v2s :)) so freaking beautiful
-
Sent you a pm yesterday just in case you missed it!
-
It's been a long time since I rock and rolled, It's been a long time since I did the Stroll ...
-
I'm charged up
-
Looking for some strange, new items again.
I know it's a really long shot but if anyone had a box for an SE070S (87USW) keyboard I would do just about anything to buy it. I'm slightly OCD when it comes to having/keeping boxes for things so I would happily pay for the box, your time, and shipping if I can luck into finding someone that has one. Otherwise I would like to buy a box for any old 87U just so I have something to store my Topre boards that are not currently in use.
-
First of what will likely be multiple items coming up for sale - the fabled PBT Granite Set with some really nice, extra keys. Add a numpad kit and you should have the correct keys to fit just about any board on the market.
-
PMed about Granite set.
-
Interested in a Native Instruments Maschine MK2 for some of those artisans?
-
Are you selling those Gateron Clears at all?
-
Are you selling those Gateron Clears at all?
Currently they are only up to help sweeten the pot for trade deals. I have the thought that they may end up on a somewhat unique Phantom I'm building if I can ever find a 7x costar wire.
Interested in a Native Instruments Maschine MK2 for some of those artisans?
Sorry, dont have much use for something like that. Thanks for the offer though!
-
pming for granites.
-
removed.
-
Switch tools gone, 7u costar wire obtained, added some new clacks, other stuff ...
-
Granite set sold and GID CC Skull are both gone! Forgotten Red is pending.
Now if only I could find that stupidly elusive Powder Puff Blue BBv2!
-
pm'ed
-
Still looking for a Topre Candy Corn blank and an MX Power Puff Blue BBv2. I'm starting to feel like Im playing Monopoly trying to get all the same color properties :))
-
I have a uniform 45g Realforce 87u if you were still looking for one? Would you be willing to trade for artisans?
-
Anxious to complete the set! Your Powder Puff Blue will go to a quiet home where he will live out the rest of his days with his two close brothers!
(https://imgur.com/BnifRS2.jpg)
-
^
-
All good things must come to an end. More to come later ...
-
oh no, what happened?
-
oh no, what happened?
Nothing really, dwindling interest in keyboards and artisans in general
-
oh no, what happened?
Nothing really, dwindling interest in keyboards and artisans in general
I feel the same sometimes strict as me and you have briefly talked about this before however it still makes me sad I didn't get to know you super well but you were awesomely generous to me when I first got here and I have spent a not insignificant portion of time staring at your old classified thread admiring your collection :p
Please feel free to PM me anytime and i hope to see you around even if its just in the car threads :))
-
Yeah, these stuff do happen. I feel that sometimes myself. Fatigue. I guess you will be having a sale soon huh?