geekhack
geekhack Community => Keyboard Keycaps => Topic started by: jond_keyhack on Mon, 23 June 2014, 14:59:24
-
I really need a standard cherry mx spacebar to fit this tipro board. It has one centre stem and two stabalizers either side. I need the high profile type and typical slant of a spacebar as seen on normal keyboards.
Has anyone ever seen noe before this size?
Also see my other thread about modifying stems to an iso enter key as I dont know how to do this. thanks peeps of geekhack :D
(http://i1288.photobucket.com/albums/b491/veozneef82/IMG_4233_zpsbf664cb5.jpg)
-
is that 4x?
-
is that 4x?
not sure what you mean .. in terms of size - let me check
... it seems to span across ....yeh I think it may be four but I cant be sure ..hold on Ill get onto tipro manuals I guess.
there are three stems to it. Two are stabilizers basically
it seems to be 3 because the stabalizers go directly into the gaps shown in this diagram
(http://i1288.photobucket.com/albums/b491/veozneef82/IMG_4233_zpsbf664cb5.jpg)
-
I am completely limited to tipro based keys for the backspace, spacebar, enter button ( covering two stems). I really need some high profile keyys that will fit the staggered layout of tipro ie just two stems over a 2 standard width as opposed to one main stem and two stabalizers either side.
Does anyone know of a high profile key that could fit the backspace, spacebar and enter key for this? I spent the past 4 hours or so debating a purchase of some beautiful pbt double shots to discover that the spacebar wouldn't fit ditto the backspace and enter key.