Post by: IvanIvanovich on Fri, 18 July 2014, 13:20:42
Order deadline 15 August. Payment deadline 20 August.
According to my data, I owe straight type wires for 6.25 platemount to:
More
jameslr
christkind
DanielT
Vitaly
eyesmiles
JotaCe
maxmalkav
Nuum
panrc
swill
CPTBadAss
TBone
chzel
admiralvorian
Clicker
JaccoW
promptcurry
strict
Grendel
nathairtras
quochung1989
watterrbottle
ninjadoc
LechnerDE
spamray
echo0
geniekid
GSimon
HoffmanMyster
bunnylake
If you want the wires, please send $1 for USA address, or $3 for international address to my paypal email to cover the shipping and cost of mailer. Please make sure you enter your username in the payment note. If you don't have a record of your invoice/paypal to locate the correct payment email, you can ask me in a PM.
THANKS
christkind
DanielT
Vitaly
eyesmiles
JotaCe
maxmalkav
Nuum
panrc
swill
CPTBadAss
TBone
chzel
admiralvorian
Clicker
JaccoW
promptcurry
strict
Grendel
nathairtras
quochung1989
watterrbottle
ninjadoc
LechnerDE
spamray
echo0
geniekid
GSimon
HoffmanMyster
bunnylake
If you want the wires, please send $1 for USA address, or $3 for international address to my paypal email to cover the shipping and cost of mailer. Please make sure you enter your username in the payment note. If you don't have a record of your invoice/paypal to locate the correct payment email, you can ask me in a PM.
THANKS
MX-Stabilizer 2.x - .85€/pc. $1.15/pc.
MX-Stabilizer Space (6.25 or 7.0) - 1€/pc. $1.35/pc.
[attachimg=1]
Same price for PCB or PLATE versions with both options available. MOQ for each size is 100.
GMK is offering us a rather nice deal on some surplus PCB with MX black. These are an 1800 style PCB that will come preconfigured for ANSI but also support ISO layout.
(http://i.imgur.com/haeRIi0.jpg)
(http://i.imgur.com/dxSM4vR.jpg)
They lack a controller but have a convenient pin header that could be used to hook up a teensy or similar. As assembled they would be 2KRO. The 3 lock switches have support on the PCB for in switch lock lights.
Price will be €15/ea with approximately 300 pieces available. This option is now added to the order form as of 24 July. If you would like to add this item please just resubmit the form.
Buyer will be responsible for payment of goods, shipping costs, for all paypal fees, and an additional $1 groupbuy fee. You will be billed and all orders collected via paypal in USD. All orders will be sent via USPS. Shipping fees will vary based on what is ordered and it's destination. I will not be liable for uninsured/nontrackable orders damaged or lost during shipping.
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60
FAQ:
Q: Can I combine this with my DOLCH or DARK PBT order? A: Yes, this will be done automatically and you won't be charged additional shipping (unless you order in large volume then you will be charged the difference).
Post by: Rewind on Fri, 18 July 2014, 13:22:54
Post by: geniekid on Fri, 18 July 2014, 13:28:51
Post by: exitfire401 on Fri, 18 July 2014, 13:29:21
Awesome, thanks for this Ivan!
Everyone needs to get in on this asap. These prices are great. I'll have to wait until after the first of the month unfortunately =(
Post by: CPTBadAss on Fri, 18 July 2014, 13:30:33
Post by: IvanIvanovich on Fri, 18 July 2014, 13:33:44
I will crosscheck orders before invoicing to determine if shipping is required or not.
Post by: HoffmanMyster on Fri, 18 July 2014, 13:34:12
Post by: exitfire401 on Fri, 18 July 2014, 13:35:05
I anticipate HUGE orders for this. I know I'm stocking up.
me too. These prices are amazing.
Post by: HoffmanMyster on Fri, 18 July 2014, 13:35:56
I anticipate HUGE orders for this. I know I'm stocking up.
me too. These prices are amazing.
Now I just need to build 34 keyboards to use all these spacebar stabs I'll have... :rolleyes:
Post by: LechnerDE on Fri, 18 July 2014, 13:36:11
I will place my order tomorrow!
Post by: CPTBadAss on Fri, 18 July 2014, 13:37:02
Yes each is for a complete assembly of leveling kit.
I will crosscheck orders before invoicing to determine if shipping is required or not.
Sounds good. Thanks for running the GB :D
Post by: yicaoyimu on Fri, 18 July 2014, 13:55:58
Post by: CPTBadAss on Fri, 18 July 2014, 13:59:40
Who made those stabs and wires exactly?
OK. I will get a groupbuy thread for stabilizer started soon. GMK says they have LOADS of them on hand so there shouldn't be any problem fulfilling our demand.
They're from GMK.
Post by: yicaoyimu on Fri, 18 July 2014, 14:05:59
Ivan, who made those stabs and wires exactly?OK. I will get a groupbuy thread for stabilizer started soon. GMK says they have LOADS of them on hand so there shouldn't be any problem fulfilling our demand.
They're from GMK.
Thanks. Yeah I saw that post earlier. What I'm really concerned about is, are these stabs and wires same as original Cherry ones. I guess the plastic part must be the same but are the wires the same spec as the original ones?
Post by: CPTBadAss on Fri, 18 July 2014, 14:07:20
What I'm really concerned about is, are these stabs and wires same as original Cherry ones.
I don't see why they're not exactly the same. I wouldn't worry.
Post by: i3oilermaker on Fri, 18 July 2014, 14:07:33
Post by: IvanIvanovich on Fri, 18 July 2014, 14:08:30
Post by: intelli78 on Fri, 18 July 2014, 14:16:11
Post by: Vitaly on Fri, 18 July 2014, 14:20:09
Post by: CPTBadAss on Fri, 18 July 2014, 14:21:17
It is the same stabilizers as on wasdkeyboards?
No, WASDKeyboards use Costar stabilizers.
Post by: tinphamhuu0212 on Fri, 18 July 2014, 14:22:07
Post by: CPTBadAss on Fri, 18 July 2014, 14:22:58
Don't want to be mean but here they are http://www.wasdkeyboards.com/index.php/products/keyboard-parts.html right ? . If so Plate-people can buy it directly from here
Except those are Costar stabilizers, not Cherry. Not the same thing. Plate Mounted Cherry Stabilizers =/= Costar. Here's some pictures showing the differences.
(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17055;image)
(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17057;image)
Pics from WFD in the GH60 thread (http://geekhack.org/index.php?topic=41464.msg828889#msg828889)
If your stabilizers look like the Costar ones and you want more stabilizers, this buy isn't for you. You can get Costars from WASDKeyboards like it was pointed out.
Post by: SpAmRaY on Fri, 18 July 2014, 14:27:15
in WASD they label Cherry MX stabilizer . I'm a little confuse here , can someone please provide some picture how exactly they look like ?
http://deskthority.net/wiki/Stabiliser#Cherry_MX
Post by: tinphamhuu0212 on Fri, 18 July 2014, 14:42:07
Don't want to be mean but here they are http://www.wasdkeyboards.com/index.php/products/keyboard-parts.html right ? . If so Plate-people can buy it directly from here
Except those are Costar stabilizers, not Cherry. Not the same thing. Plate Mounted Cherry Stabilizers =/= Costar. Here's some pictures showing the differences.Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17055;image)Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17057;image)
Pics from WFD in the GH60 thread (http://geekhack.org/index.php?topic=41464.msg828889#msg828889)
If your stabilizers look like the Costar ones and you want more stabilizers, this buy isn't for you. You can get Costars from WASDKeyboards like it was pointed out.
Thanks you guys , This is exactly the one I want to buy . One more thing . Does the Plate-Mounted Cherry fit on the cut out of costain WASD they label Cherry MX stabilizer . I'm a little confuse here , can someone please provide some picture how exactly they look like ?
http://deskthority.net/wiki/Stabiliser#Cherry_MX
Post by: Battou62 on Fri, 18 July 2014, 14:44:30
Post by: snoopy on Fri, 18 July 2014, 14:46:06
Post by: clacktalk on Fri, 18 July 2014, 14:55:28
Post by: Vitaly on Fri, 18 July 2014, 15:02:31
Placed order. Need some stabilizers for keyboard project, why not to try Cherry. Corstar/Cherry anyway they do the same job.Don't want to be mean but here they are http://www.wasdkeyboards.com/index.php/products/keyboard-parts.html right ? . If so Plate-people can buy it directly from here
Except those are Costar stabilizers, not Cherry. Not the same thing. Plate Mounted Cherry Stabilizers =/= Costar. Here's some pictures showing the differences.Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17055;image)Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17057;image)
Pics from WFD in the GH60 thread (http://geekhack.org/index.php?topic=41464.msg828889#msg828889)
If your stabilizers look like the Costar ones and you want more stabilizers, this buy isn't for you. You can get Costars from WASDKeyboards like it was pointed out.
Post by: HoffmanMyster on Fri, 18 July 2014, 15:13:27
I have a dumb question: when filling out the "real name and mailing address," should I separate my name and parts of my address by commas or by lines? The "EXACTLY" part scared me, and I didn't want to complicate things by messing up haha
Name Name
38924 Something Rd
City, ST 89432
Country
:thumb:
Post by: clacktalk on Fri, 18 July 2014, 15:25:29
Post by: ninjadoc on Fri, 18 July 2014, 15:31:51
Post by: IvanIvanovich on Fri, 18 July 2014, 18:15:06
This is fine
name
123 street
town, state/province
post code
country
or this is fine
name, 123 street, town, state/province, post code, country
MOQ already reached on both 2.x and 6.25 plate. Half way there for the others.
Post by: xavierblak on Fri, 18 July 2014, 18:27:12
Does it make sense to buy one type over the other if you aren't sure where it's going to be used yet? Like how you could buy cherry pcb mount switches but clip the plastic nubs and basically convert them to plate mount.
Post by: IvanIvanovich on Fri, 18 July 2014, 18:33:25
Post by: Zentaaa on Fri, 18 July 2014, 18:54:28
Post by: BunnyLake on Fri, 18 July 2014, 19:43:16
Post by: GSimon on Fri, 18 July 2014, 19:48:21
Post by: swill on Fri, 18 July 2014, 20:36:06
Post by: minho on Fri, 18 July 2014, 21:20:20
Post by: CPTBadAss on Fri, 18 July 2014, 21:39:58
Post by: yicaoyimu on Fri, 18 July 2014, 22:12:21
Post by: HoffmanMyster on Fri, 18 July 2014, 22:13:18
I haven't seen an option for 2.75/2.25/2 wires. Do we need to specify the length of the wires or does this groupbuy only come with 2 unit wires?
Only 2x. 2x stabilizers are used for a number of different sized keys (backspace, both shifts, enter, and numpad + and enter).
Post by: engicoder on Fri, 18 July 2014, 22:14:30
GH60 folks jump on this!!
Post by: codyeatworld on Fri, 18 July 2014, 22:23:01
Will place my order soon.
Post by: Vitaly on Sat, 19 July 2014, 00:18:48
Post by: yuiop on Sat, 19 July 2014, 02:43:31
Are plate mounted or PCB mounted more common for custom keyboards? (PCB mounted is I believe? but I am not sure.)
In general, PCB mounted is much more common. I'd say basically all Korean customs use PCB mounted.
Phantom and Ergodox are two popular customs that you might need plate mounted stabs for. But it might be a moot point anyway since stabilizers are optional for Ergodox and you can use costar stabs (easier to find) with Phantom.
Post by: Delete on Sat, 19 July 2014, 04:10:45
Post by: Mooby on Sat, 19 July 2014, 05:22:40
Post by: yuiop on Sat, 19 July 2014, 05:56:19
Is it possible to replace the costar stabs of a filco with the plate mounted ones from here?
Nope
Post by: Vitaly on Sat, 19 July 2014, 05:59:17
Post by: Gloomy Moonie on Sat, 19 July 2014, 11:24:18
Post by: CPTBadAss on Sat, 19 July 2014, 12:15:13
Where I can get sizes of stabilizers for plate design? Datasheet etc...
This is the Cherry MX datasheet hosted by digikey.com (http://media.digikey.com/pdf/Data%20Sheets/Cherry%20PDFs/MX%20Series.pdf). Page 10-4 has all the information on the stabilizers. Cherry calls them "leveler kits". There is also information on this in the Simple Questions Simple Answers OP (http://geekhack.org/index.php?topic=40501.0#post_Stab).
Post by: IvanIvanovich on Sat, 19 July 2014, 12:16:57
As far as adapting Costar to Cherry... it is possible but would require considerable effort. You would have to disassemble the entire thing and modify the plate or have a new plate made with the appropriate stab cut outs.
Post by: TBone on Sat, 19 July 2014, 13:03:57
EDIT: Changed my order...just getting enough for my own custom for now. Need to save up for my case. :p
Post by: LechnerDE on Sat, 19 July 2014, 13:29:51
This time Google didn't offer me a link, so I can edit it later.
In case I decide to get more stuff I just place a new order to replace the old one right?
Post by: pichu23 on Sat, 19 July 2014, 15:27:26
Post by: Grendel on Sat, 19 July 2014, 16:33:12
Post by: TBone on Sat, 19 July 2014, 17:12:00
Post by: pix3l_fodder on Sat, 19 July 2014, 17:35:19
Post by: osxoep on Sat, 19 July 2014, 18:44:53
forgot that ISO has one extra stab, need to change order also.... may buy some more just for sake.it does? I thought ISO needed one less
Post by: Vintage on Sat, 19 July 2014, 22:45:32
Will the spacebar stabilizers work for 6.25x and 7x spacebars?.... or only 6.25?
Post by: GSimon on Sun, 20 July 2014, 00:02:02
Great GB :)
Will the spacebar stabilizers work for 6.25x and 7x spacebars?.... or only 6.25?
...The 6.25 PCB/plate mount will work for 6.25x sizes and the 7 PCB/plate mount will work for 7x spacebars. Did you bother to check the order form?
Post by: TBone on Sun, 20 July 2014, 00:36:29
Post by: pix3l_fodder on Sun, 20 July 2014, 02:43:17
forgot that ISO has one extra stab, need to change order also.... may buy some more just for sake.it does? I thought ISO needed one less
sorry confusing myself.... ugh long day! Its also because I plan on making a ANSI/ISO crossover i was getting confused! For ISO its backspace, enter, right shift and space bar right?
Post by: IvanIvanovich on Sun, 20 July 2014, 09:51:43
If you want to change your order resubmitting is the way to do so.
Post by: RickyJ on Sun, 20 July 2014, 10:24:58
Post by: RickyJ on Mon, 21 July 2014, 00:42:18
Post by: Findecanor on Mon, 21 July 2014, 03:15:05
I haven't been able to find any comparison, but what are the benefits of plate vs pcb mount Cherry stabs? I'm used to Cherry PCB stabs, but have never used the plate mounted versions.The only functional difference is that the plate-mounted snap to the plate instead of to the PCB. They work and feel the same.
The parts that snap to the plate/PCB are not interchangeable. You can't put PCB-mounted in a plate-mounted keyboard and vice versa.
There are exceptions in DIY keyboards where a plate would be optional there are sometimes extra large holes in the plate to allow the PCB-mounted stabs to be fitted.
Post by: Limewirelord on Mon, 21 July 2014, 05:39:07
Post by: domoaligato on Mon, 21 July 2014, 10:43:44
Is it possible to replace the costar stabs of a filco with the plate mounted ones from here?
yes. you can buy a phantom plate and install it on your filco at the same time. bphinay also makes and sells programable contollers for it also.
edit.... plate applies to tkl filco. controllers have been made for tkl and fullsized both.
Post by: strict on Mon, 21 July 2014, 16:24:34
Is it possible to replace the costar stabs of a filco with the plate mounted ones from here?
yes. you can buy a phantom plate and install it on your filco at the same time. bphinay also makes and sells programable contollers for it also.
edit.... plate applies to tkl filco. controllers have been made for tkl and fullsized both.
You cannot use a phantom plate (http://deskthority.net/w/images/2/2c/PHANSI125.jpg) on a Filco keyboard due to the controller (or any other keyboard where the controller is on the top). You need a universal TKL plate (http://i.imgur.com/1JifDzR.png) for those keyboards.
Post by: ProCarpet on Tue, 22 July 2014, 03:36:56
Post by: Fnzzy on Tue, 22 July 2014, 13:41:33
Post by: domoaligato on Tue, 22 July 2014, 14:16:33
Is it possible to replace the costar stabs of a filco with the plate mounted ones from here?
yes. you can buy a phantom plate and install it on your filco at the same time. bphinay also makes and sells programable contollers for it also.
edit.... plate applies to tkl filco. controllers have been made for tkl and fullsized both.
You cannot use a phantom plate (http://deskthority.net/w/images/2/2c/PHANSI125.jpg) on a Filco keyboard due to the controller (or any other keyboard where the controller is on the top). You need a universal TKL plate (http://i.imgur.com/1JifDzR.png) for those keyboards.
thanks for the correction I know that derp... lol
Post by: IvanIvanovich on Wed, 23 July 2014, 14:09:51
Post by: geniekid on Wed, 23 July 2014, 14:22:42
Order amounts added to OP. Order more spacebar stabs.
Looking at totals, the spacebar to 2x ratio is ~.42. Doesn't that already seem high given the standard TKL board has a .25 ratio?
Post by: TBone on Wed, 23 July 2014, 14:23:19
Order amounts added to OP. Order more spacebar stabs.
I'm correct that all hit MOQ right? Yay! :D
Post by: IvanIvanovich on Wed, 23 July 2014, 14:53:17
Post by: geniekid on Wed, 23 July 2014, 15:11:19
Post by: TBone on Wed, 23 July 2014, 15:32:37
What is the quantity needed for the price break? I can add a few more stabs to my order... :)
This. Just let us know Ivan and I can bump it! :thumb:
Post by: cjhard on Wed, 23 July 2014, 17:51:19
I encourage anyone else to do the same. Spacebar stabs aren't so easy to find as a 2x. Get yourself 1:1 space to 2x, or you'll be crying when your 10th project board has everything but a spacebar
Post by: IvanIvanovich on Wed, 23 July 2014, 18:28:10
Post by: minho on Wed, 23 July 2014, 19:06:22
Post by: strict on Wed, 23 July 2014, 20:04:15
Are plate or PCB mounted stabilizers more common in custom boards? IIRC, PCB mounted stabilizers are, but I want to double check before I order anything.
Most of the Korean customs I've seen use PCB mount stabs.
Post by: IvanIvanovich on Wed, 23 July 2014, 20:45:59
Post by: garrettwp on Thu, 24 July 2014, 02:01:46
- Garrett
Post by: Leimi on Thu, 24 July 2014, 05:57:13
Post by: IvanIvanovich on Thu, 24 July 2014, 12:27:39
(http://i.imgur.com/haeRIi0.jpg)
(http://i.imgur.com/dxSM4vR.jpg)
They lack a controller but have a convenient pin header that could be used to hook up a teensy or similar. As assembled they would be 2KRO. The 3 lock switches have support on the PCB for in switch lock lights.
Price will be €15/ea with approximately 300 pieces available. This option is now added to the order form in the OP.
Another similar PCB in a matrix layout may also be offered. I will let you know when I have further details on that one.
Post by: jdcarpe on Thu, 24 July 2014, 12:31:22
GMK is offering us a rather nice deal on some surplus PCB with MX black. These are an 1800 style PCB that will come preconfigured for ANSI but also support ISO layout.Show Image(http://i.imgur.com/haeRIi0.jpg)Show Image(http://i.imgur.com/dxSM4vR.jpg)
They lack a controller but have a convenient pin header that could be used to hook up a teensy or similar. As assembled they would be 2KRO. The 3 lock switches have support on the PCB for in switch lock lights. These should fit inside a standard G81-1800 case.
Price will be €15/ea with approximately 300 pieces available. This option is now added to the order form in the OP.
Another similar PCB in a matrix layout may also be offered. I will let you know when I have further details on that one.
So, in theory, since this has no controller of its own, you could replace all the in-switch jumpers with in-switch diodes to get NKRO using a Teensy, right? Count me in.
Post by: HoffmanMyster on Thu, 24 July 2014, 12:33:10
GMK is offering us a rather nice deal on some surplus PCB with MX black. These are an 1800 style PCB that will come preconfigured for ANSI but also support ISO layout.Show Image(http://i.imgur.com/haeRIi0.jpg)Show Image(http://i.imgur.com/dxSM4vR.jpg)
They lack a controller but have a convenient pin header that could be used to hook up a teensy or similar. As assembled they would be 2KRO. The 3 lock switches have support on the PCB for in switch lock lights. These should fit inside a standard G81-1800 case.
Price will be €15/ea with approximately 300 pieces available. This option is now added to the order form in the OP.
Another similar PCB in a matrix layout may also be offered. I will let you know when I have further details on that one.
So, in theory, since this has no controller of its own, you could replace all the in-switch jumpers with in-switch diodes to get NKRO using a Teensy, right? Count me in.
Oooh, if you can do this, then I'm in. :thumb:
Post by: jdcarpe on Thu, 24 July 2014, 12:39:35
GMK is offering us a rather nice deal on some surplus PCB with MX black. These are an 1800 style PCB that will come preconfigured for ANSI but also support ISO layout.Show Image(http://i.imgur.com/haeRIi0.jpg)Show Image(http://i.imgur.com/dxSM4vR.jpg)
They lack a controller but have a convenient pin header that could be used to hook up a teensy or similar. As assembled they would be 2KRO. The 3 lock switches have support on the PCB for in switch lock lights. These should fit inside a standard G81-1800 case.
Price will be €15/ea with approximately 300 pieces available. This option is now added to the order form in the OP.
Another similar PCB in a matrix layout may also be offered. I will let you know when I have further details on that one.
So, in theory, since this has no controller of its own, you could replace all the in-switch jumpers with in-switch diodes to get NKRO using a Teensy, right? Count me in.
Oooh, if you can do this, then I'm in. :thumb:
I can't tell if those jumper pads have traces going to them, though. It looks like maybe they don't. :(
Post by: IvanIvanovich on Thu, 24 July 2014, 12:47:32
Post by: TBone on Thu, 24 July 2014, 12:56:17
Post by: Findecanor on Thu, 24 July 2014, 13:35:56
The Space Bar would have to be a Cherry/GMK type... 6 units wide and offset switch stem, but there are no 6-unit stabilizer available in this group buy ... ;)
I'd say that PCB is for someone who wants the switches or wants to mod it to build one with a large number of function keys or cut the PCB up to make a smaller keyboard in some custom layout.
Post by: CPTBadAss on Thu, 24 July 2014, 13:41:24
BTW, that PCB would not fit into a real G80-1800
Just out of curiosity's sake, how can you tell it won't fit?
Post by: Photekq on Thu, 24 July 2014, 13:43:01
Gaps between arrow cluster/alphanumerics/numpad - there aren't any.BTW, that PCB would not fit into a real G80-1800
Just out of curiosity's sake, how can you tell it won't fit?
Post by: Findecanor on Thu, 24 July 2014, 13:45:38
Just out of curiosity's sake, how can you tell it won't fit?Because on a real G80-1800 there is some space in-between groups of keys, space that I can not see here.
On this PCB you can see an unbroken row of nine one-unit keys on the bottom row. On a real G80-1800, that row is broken: the cursor keys are forward and with space around to the main area and to the numeric keypad. There is also space between Return and the numeric keypad on a G80-1800. There is also 1/4u space between Esc and F1 and between each function-key group.
BTW, I think you would need a Teensy++ if you are going to support all keys. A regular Teensy doesn't have as many I/O lines as this keyboard has header pins.
I think this keyboard could be great cheap PCB to cut up into a custom 70% or whatever. I am tempted to buy one just for that.
Post by: IvanIvanovich on Thu, 24 July 2014, 14:05:02
(http://img585.imageshack.us/img585/5849/desko1.jpg)
It's not a direct fit for an 1800. I am not sure what other commonly available stock cases from other boards if any this PCB would fit inside without any modification.
Post by: JaccoW on Thu, 24 July 2014, 14:39:22
Post by: Misterorjoe on Thu, 24 July 2014, 16:25:37
Post by: swill on Thu, 24 July 2014, 16:40:08
You're right. I suppose it would actually be closer to this one. Or possibly it is exactly to this one?Show Image(http://img585.imageshack.us/img585/5849/desko1.jpg)
It's not a direct fit for an 1800. I am not sure what other commonly available stock cases from other boards if any this PCB would fit inside without any modification.
That is a pretty awesome layout actually. Ivan, I know you have probably said it many times, but if I don't have the link to edit my order, how do I update my order? I believe I just resubmit my order, but I don't know if I only add to it or if I also specify what I had in my previous order.
Post by: geniekid on Thu, 24 July 2014, 16:42:29
If you want to change your order resubmitting is the way to do so.
Post by: IvanIvanovich on Thu, 24 July 2014, 16:45:31
Post by: yicaoyimu on Thu, 24 July 2014, 16:50:31
Post by: IvanIvanovich on Thu, 24 July 2014, 16:58:04
Post by: strict on Thu, 24 July 2014, 17:00:26
Would I want a plate mount or a PCB mount for an acrylic Massdrop Ergodox?
The Massdrop boards don't have any holes for PCB stabilizers (only the white MK boards have them) so I'm pretty sure you will want plate mount.
Post by: IvanIvanovich on Thu, 24 July 2014, 17:05:07
Post by: swill on Thu, 24 July 2014, 17:18:27
When resubmit you need to enter in everything as the old order gets discarded.
Perfect, thanks for clarifying... :)
Post by: Lubed Up Slug on Thu, 24 July 2014, 21:06:55
Post by: jorgenslee on Thu, 24 July 2014, 21:29:53
Post by: IvanIvanovich on Sat, 26 July 2014, 10:00:51
Post by: RickyJ on Sat, 26 July 2014, 10:33:42
Post by: oneproduct on Sat, 26 July 2014, 10:49:35
Post by: Findecanor on Sat, 26 July 2014, 10:50:52
Would I want a plate mount or a PCB mount for an acrylic Massdrop Ergodox?For the Massdrop ErgoDox, you would want Costar-style plate-mount stabilisers instead. Cherry-style stabilisers won't fit.
What is the difference between all the different types of stabilizers? In terms of compatibility, feel, and durability?You wouldn't order unless you think you will have a DIY project where you would need them. ;) It depends on the PCB and/or plate you choose. The merits of Cherry vs. Costar-style plate-mount stabilisers has been discussed at length in other threads ... The feel of PCB-mounted and plate-mounted Cherry-style stabilisers is about the same because the parts are mostly the same.
Post by: Lubed Up Slug on Sat, 26 July 2014, 13:51:14
Would I want a plate mount or a PCB mount for an acrylic Massdrop Ergodox?For the Massdrop ErgoDox, you would want Costar-style plate-mount stabilisers instead. Cherry-style stabilisers won't fit.What is the difference between all the different types of stabilizers? In terms of compatibility, feel, and durability?You wouldn't order unless you think you will have a DIY project where you would need them. ;) It depends on the PCB and/or plate you choose. The merits of Cherry vs. Costar-style plate-mount stabilisers has been discussed at length in other threads ... The feel of PCB-mounted and plate-mounted Cherry-style stabilisers is about the same because the parts are mostly the same.
I just built an ergodox and have a sprit 60% PCB on the way. So get costars for the ergodox and these for the 60%?
Post by: swill on Sat, 26 July 2014, 22:24:20
Would I want a plate mount or a PCB mount for an acrylic Massdrop Ergodox?For the Massdrop ErgoDox, you would want Costar-style plate-mount stabilisers instead. Cherry-style stabilisers won't fit.What is the difference between all the different types of stabilizers? In terms of compatibility, feel, and durability?You wouldn't order unless you think you will have a DIY project where you would need them. ;) It depends on the PCB and/or plate you choose. The merits of Cherry vs. Costar-style plate-mount stabilisers has been discussed at length in other threads ... The feel of PCB-mounted and plate-mounted Cherry-style stabilisers is about the same because the parts are mostly the same.
I just built an ergodox and have a sprit 60% PCB on the way. So get costars for the ergodox and these for the 60%?
You need PCB mount stabs for Sprits builds (unless you managed to get a 1.6mm plate). For the Ergodox, I think it depends on which PCBs you got. I just read recently (i think) that the MK ergodox pcbs have pcb mount stabilizer holes, but the MD ones don't. I have never verified this, but something to check...
Post by: quake4mhg on Sun, 27 July 2014, 01:40:04
Post by: apathy3cs on Sun, 27 July 2014, 02:52:45
Good prices?
something to tinker with?
Always a good thing. Thanks for setting up!
Post by: apathy3cs on Sun, 27 July 2014, 03:14:30
I'm still somewhat new to this but from what I do understand I'm pretty sure the MD one does come with it. Picture for reference:Would I want a plate mount or a PCB mount for an acrylic Massdrop Ergodox?For the Massdrop ErgoDox, you would want Costar-style plate-mount stabilisers instead. Cherry-style stabilisers won't fit.What is the difference between all the different types of stabilizers? In terms of compatibility, feel, and durability?You wouldn't order unless you think you will have a DIY project where you would need them. ;) It depends on the PCB and/or plate you choose. The merits of Cherry vs. Costar-style plate-mount stabilisers has been discussed at length in other threads ... The feel of PCB-mounted and plate-mounted Cherry-style stabilisers is about the same because the parts are mostly the same.
I just built an ergodox and have a sprit 60% PCB on the way. So get costars for the ergodox and these for the 60%?
You need PCB mount stabs for Sprits builds (unless you managed to get a 1.6mm plate). For the Ergodox, I think it depends on which PCBs you got. I just read recently (i think) that the MK ergodox pcbs have pcb mount stabilizer holes, but the MD ones don't. I have never verified this, but something to check...
(https://drive.google.com/file/d/0B1I3GCnUfrJ7Vl9zWUt0UnYtN0E/edit?usp=sharing)
Post by: GeorgeK on Tue, 29 July 2014, 13:51:53
Post by: QWERTim on Thu, 31 July 2014, 03:39:55
Just a heads up when ordering, make sure that you clarify you want the PLATE mount stabs alongside PCB stabs. Turns out they have 3 varieties: PCB snap in, PCB screw mount and Plate mount. GMK managed to mixed our order up and almost sent us both PCB mounts when we wanted Plate and PCB!
If you need further details such as the GMK part numbers, drop me a PM and I'll send them over.
(http://i.imgur.com/5mtzuQs.jpg)
(http://i.imgur.com/x2d6VGB.jpg)
Post by: Motan22 on Thu, 31 July 2014, 04:59:17
Post by: geniekid on Thu, 31 July 2014, 08:38:07
Hi Ivan
Just a heads up when ordering, make sure that you clarify you want the PLATE mount stabs alongside PCB stabs. Turns out they have 3 varieties: PCB snap in, PCB screw mount and Plate mount. GMK managed to mixed our order up and almost sent us both PCB mounts when we wanted Plate and PCB!
:thumb:
That's really interesting! I'm curious which PCB ones we will be getting.
Post by: CPTBadAss on Thu, 31 July 2014, 08:39:19
Gaps between arrow cluster/alphanumerics/numpad - there aren't any.BTW, that PCB would not fit into a real G80-1800
Just out of curiosity's sake, how can you tell it won't fit?
Just out of curiosity's sake, how can you tell it won't fit?Because on a real G80-1800 there is some space in-between groups of keys, space that I can not see here.
On this PCB you can see an unbroken row of nine one-unit keys on the bottom row. On a real G80-1800, that row is broken: the cursor keys are forward and with space around to the main area and to the numeric keypad. There is also space between Return and the numeric keypad on a G80-1800. There is also 1/4u space between Esc and F1 and between each function-key group.
Thanks for the info guys :D
Post by: strict on Thu, 31 July 2014, 08:54:00
Hi Ivan
Just a heads up when ordering, make sure that you clarify you want the PLATE mount stabs alongside PCB stabs. Turns out they have 3 varieties: PCB snap in, PCB screw mount and Plate mount. GMK managed to mixed our order up and almost sent us both PCB mounts when we wanted Plate and PCB!
If you need further details such as the GMK part numbers, drop me a PM and I'll send them over.Show Image(http://i.imgur.com/5mtzuQs.jpg)Show Image(http://i.imgur.com/x2d6VGB.jpg)
Damn ... the PCB screw in ones look awesome! Didn't some of the boards that came with Nixdorf blacks have those as well?
Post by: JaccoW on Thu, 31 July 2014, 08:56:38
SkiData had them as well. They should be even more solid than the normal ones.Hi Ivan
Just a heads up when ordering, make sure that you clarify you want the PLATE mount stabs alongside PCB stabs. Turns out they have 3 varieties: PCB snap in, PCB screw mount and Plate mount. GMK managed to mixed our order up and almost sent us both PCB mounts when we wanted Plate and PCB!
If you need further details such as the GMK part numbers, drop me a PM and I'll send them over.Show Image(http://i.imgur.com/5mtzuQs.jpg)Show Image(http://i.imgur.com/x2d6VGB.jpg)
Damn ... the PCB screw in ones look awesome! Didn't some of the boards that came with Nixdorf blacks have those as well?
Post by: jorgenslee on Thu, 31 July 2014, 08:58:53
Is it compatible with boards that support PCB mount?SkiData had them as well. They should be even more solid than the normal ones.Hi Ivan
Just a heads up when ordering, make sure that you clarify you want the PLATE mount stabs alongside PCB stabs. Turns out they have 3 varieties: PCB snap in, PCB screw mount and Plate mount. GMK managed to mixed our order up and almost sent us both PCB mounts when we wanted Plate and PCB!
If you need further details such as the GMK part numbers, drop me a PM and I'll send them over.Show Image(http://i.imgur.com/5mtzuQs.jpg)Show Image(http://i.imgur.com/x2d6VGB.jpg)
Damn ... the PCB screw in ones look awesome! Didn't some of the boards that came with Nixdorf blacks have those as well?
Post by: JaccoW on Thu, 31 July 2014, 09:17:36
Post by: whiskytango on Thu, 31 July 2014, 09:28:29
All I am saying is that if you are planning on running the screw-in type under a plate with the universal stab cutouts, it might be wise to make sure these fit. If your plate is meant to be used with PCB mount stabs like the Korean style, I don't think it would be an issue either way.
Has anyone else had this issue? Does anyone know if the newer screw-in PCB stabs have the same footprint as the snap-ins?
Post by: IvanIvanovich on Thu, 31 July 2014, 09:39:04
Post by: bazh on Thu, 31 July 2014, 09:40:42
The pcb, though it doesn't fit in 1800 case (and not as cool as well), it will be really cool and easier to make some tray alu housing and blockers for them :p
Post by: awong on Thu, 31 July 2014, 09:53:46
Post by: JaccoW on Thu, 31 July 2014, 10:26:01
If they fit and are available for order then I will put my order in for some, never try that type.It could be made into a really affordable keyboard if someone designs a case for it.
The pcb, though it doesn't fit in 1800 case (and not as cool as well), it will be really cool and easier to make some tray alu housing and blockers for them :p
Post by: bazh on Thu, 31 July 2014, 10:29:38
If they fit and are available for order then I will put my order in for some, never try that type.It could be made into a really affordable keyboard if someone designs a case for it.
The pcb, though it doesn't fit in 1800 case (and not as cool as well), it will be really cool and easier to make some tray alu housing and blockers for them :p
yeah, could be done in Poker style since the pcb design doesn't need top case (it doesn't have gaps) so the case design must be simple, the matter is who to make tho :D
Post by: Vintage on Thu, 31 July 2014, 10:30:36
Post by: swill on Thu, 31 July 2014, 10:33:10
Post by: mlng on Thu, 31 July 2014, 11:07:43
Just trying to figure out which stabs to order for the PCB.
Apologies if this was mentioned elsewhere on the thread (didn't see it).
thanks
Post by: IvanIvanovich on Thu, 31 July 2014, 11:21:11
It may be possible to get 4 or maybe even 5 kro if the firmware is done right without having to do any manual work on the PCB. There are a few G80 models and others that managed to do that without using diodes so it should be possible. But I am not a firmware expert.
As far as case. I agree that a simple tray type should be the cheapest. It could be done like Poker or even cheaper would probably to do it like the Neo where the pcb is essentially just mounted on top of an angled slab.
Post by: swill on Thu, 31 July 2014, 11:57:55
The PCB requires 6 units spacebar stabilizer... which isn't available here. Easy solution to this issue is if you need keycaps for it also to grab a G81-7000 or winkey 1800 as it will also come with the correct 6 units wire length.
It may be possible to get 4 or maybe even 5 kro if the firmware is done right without having to do any manual work on the PCB. There are a few G80 models and others that managed to do that without using diodes so it should be possible. But I am not a firmware expert.
As far as case. I agree that a simple tray type should be the cheapest. It could be done like Poker or even cheaper would probably to do it like the Neo where the pcb is essentially just mounted on top of an angled slab.
If I can figure out how to get better than 2KRO, I will be getting one of these. I will be building my own minimal case (http://geekhack.org/index.php?topic=51872.msg1144912#msg1144912) for it.
Post by: nubbinator on Fri, 01 August 2014, 00:28:53
:confused: I've been told that the bolt on ones haven't been made since the 80's
If there are screw anchored PCB mount stabs and we can get them, I'm most definitely in for some. Can we get an update to make sure they have them?
Post by: bazh on Fri, 01 August 2014, 00:40:36
//a bit OT: so now GMK do the stab? I thought Cherry was still the one to make them.
Post by: mashby on Fri, 01 August 2014, 07:57:38
:confused: I've been told that the bolt on ones haven't been made since the 80's
If there are screw anchored PCB mount stabs and we can get them, I'm most definitely in for some. Can we get an update to make sure they have them?
Ditto.
Post by: CPTBadAss on Fri, 01 August 2014, 07:58:19
If there are screw anchored PCB mount stabs and we can get them, I'm most definitely in for some. Can we get an update to make sure they have them?
Agreed, I'd like some sets just to check out.
Post by: QWERTim on Fri, 01 August 2014, 08:12:57
QWERTim, you have any ideas whether they still have the bolt mount made or available?
//a bit OT: so now GMK do the stab? I thought Cherry was still the one to make them.
I'm sure they are available, however I'll leave it to Ivan to sort out for you guys - don't want to interfer!
Post by: bazh on Fri, 01 August 2014, 10:14:24
Post by: eyesmiles on Fri, 01 August 2014, 14:44:04
Post by: TLSC.wipeOut on Fri, 01 August 2014, 21:23:53
Post by: FreeCopy on Fri, 01 August 2014, 23:14:06
Post by: Flamingchook on Sat, 02 August 2014, 04:50:57
Great job as always Ivan.
Post by: justnits on Mon, 04 August 2014, 01:03:47
Post by: lewi on Mon, 04 August 2014, 01:04:40
do you know its crunch sound is noisy like new black switch or, quiet like vintage cherry switch.
Post by: byker on Mon, 04 August 2014, 01:08:26
Post by: clacktalk on Mon, 04 August 2014, 02:25:30
Post by: GeorgeK on Mon, 04 August 2014, 04:18:22
Post by: redskull on Mon, 04 August 2014, 13:20:41
ivan, is the 6.25u stab bar is as shown in the picture? as in there's a curve in the middle or is it straight like 7u's?
THIS Ivan. need clarification please.
Post by: quake4mhg on Mon, 04 August 2014, 21:19:31
Post by: whiskytango on Mon, 04 August 2014, 22:42:27
"curve in the middle" means something? ^-^ <--- noob
If it's got that offset bend in the middle it won't work with a plate. It will still work on a pcb without a plate though.
Post by: swill on Mon, 04 August 2014, 23:11:05
Post by: IvanIvanovich on Tue, 05 August 2014, 13:10:02
Post by: mashby on Tue, 05 August 2014, 13:17:27
Post by: quake4mhg on Tue, 05 August 2014, 13:39:10
Could you explain why it's not work? :D Thanks"curve in the middle" means something? ^-^ <--- noobIf it's got that offset bend in the middle it won't work with a plate. It will still work on a pcb without a plate though.
Post by: xavierblak on Tue, 05 August 2014, 13:42:49
Could you explain why it's not work? :D Thanks"curve in the middle" means something? ^-^ <--- noobIf it's got that offset bend in the middle it won't work with a plate. It will still work on a pcb without a plate though.
The bend is too tall and doesn't fit between the pcb and the plate.
Post by: nubbinator on Tue, 05 August 2014, 15:23:17
Any more information regarding the screw down PCB stabs?
Second this. I haven't put an order in yet because I'm.waiting.on that answer.
Post by: IvanIvanovich on Tue, 05 August 2014, 16:05:58
Post by: swill on Tue, 05 August 2014, 16:14:16
No. But if they do have the bolt on ones for us, would it be a problem if all the PCB mounts got those? I don't really want the hassle of dealing with both kinds.
Are the bolt ones 100% compatible with PCB mount PCBs? If yes, then maybe, but if not then I don't see how that would work. Can we get more details on the bolt ones and how they are expected to work? I know for my PCBs I am not sure how the bolt one would work...
Post by: Grendel on Tue, 05 August 2014, 16:23:23
Post by: IvanIvanovich on Tue, 05 August 2014, 16:27:58
Post by: swill on Tue, 05 August 2014, 17:03:40
Besides Cherry G80 models, the only other thing I ever used bolt ons is the GH60 rev A I have. The only real difference I think they have now is they use a bolt instead of the clip in (obviously) which makes them much harder to unseat but maybe more likely to damage the PCB? The original ones like i have didn't have those little shocks under the stem insert pieces either which made them feel better but I don't think this is the case anymore. So, I think they are all the same really. As far as the ones I have, the base that makes contact with the PCB seem to be the same dimensions so it shouldn't really matter.
Cool. Thanks for the detail. I think it is probably fine to replace the PCB mount ones with the PCB bolt mount ones then (if they are available).
Post by: justnits on Tue, 05 August 2014, 19:46:36
Payment deadline... lets make it 20th.
ivan, do you know anything about the 6.25u metal bar being straight or does it has that bend in the middle?
ivan, is the 6.25u stab bar is as shown in the picture? as in there's a curve in the middle or is it straight like 7u's?
Post by: IvanIvanovich on Wed, 06 August 2014, 11:48:31
Post by: justnits on Wed, 06 August 2014, 21:30:58
PCB mount has the bend in it, Plate won't.
which means to say,
the PCB 6.25u has the bend.
PCB 7u, plate 6.25u, plate 7u is straight?
Post by: korrelate on Wed, 06 August 2014, 23:49:50
Ordered! Thanks again Ivan
Cheers,
K
Post by: IvanIvanovich on Thu, 07 August 2014, 01:39:37
Yes, only the pcb mount 6.25 has a bend.
Post by: Lubed Up Slug on Thu, 07 August 2014, 21:43:48
Post by: ninjadoc on Sat, 09 August 2014, 13:54:19
Could you explain why it's not work? :D Thanks"curve in the middle" means something? ^-^ <--- noobIf it's got that offset bend in the middle it won't work with a plate. It will still work on a pcb without a plate though.
The bend is too tall and doesn't fit between the pcb and the plate.
I'm stupid when it comes to building a board so I have to ask if besides building a board without a plate is there any instance I will need a 6.25 PCB mounted wire/stab set with the curved offset in the middle?
Post by: JaccoW on Sat, 09 August 2014, 15:53:14
(http://i.imgur.com/ZnatxgN.jpg) (http://imgur.com/ZnatxgN)
(http://i.imgur.com/UDpmhpXl.jpg) (http://imgur.com/UDpmhpX)
(Click for high res)
Those tiny screws you see on there are the bolts.
Compare it to the Backspace stabilizers which are regular PCB-mounted ones.
Post by: user 18 on Mon, 11 August 2014, 14:05:10
Post by: IvanIvanovich on Mon, 11 August 2014, 15:13:18
Post by: mashby on Mon, 11 August 2014, 17:36:20
Post by: korrelate on Mon, 11 August 2014, 21:50:03
Cheers,
K
Post by: swill on Mon, 11 August 2014, 22:38:28
Post by: SpAmRaY on Tue, 12 August 2014, 07:09:08
Ya, I would be interested in the bolt stabs as well. Mainly because I have never seen them before, so that makes me want to try them. Oh and because pcb mount stabs always come out on me when I pull tight keycaps, which is annoying...
Not to be dense but these bolt mount stabs work with any PCB that accepts regular PCB mount stabs? I thought the PCB had to have a different hole for the bolt?
Post by: HoffmanMyster on Tue, 12 August 2014, 10:14:36
Ya, I would be interested in the bolt stabs as well. Mainly because I have never seen them before, so that makes me want to try them. Oh and because pcb mount stabs always come out on me when I pull tight keycaps, which is annoying...
Not to be dense but these bolt mount stabs work with any PCB that accepts regular PCB mount stabs? I thought the PCB had to have a different hole for the bolt?
That's what I thought too, which is why I'm confused as to where this demand is coming from. AFAIK there are few boards that will accept them and they usually come with them.
Post by: BunnyLake on Tue, 12 August 2014, 10:19:10
Post by: mashby on Tue, 12 August 2014, 10:21:38
Post by: domoaligato on Tue, 12 August 2014, 10:31:21
Post by: IvanIvanovich on Tue, 12 August 2014, 11:48:32
Post by: SpAmRaY on Tue, 12 August 2014, 12:01:31
PCB mount have the same mounting dimension whether it is clip in or bolt. The bolt is the only difference, and does go in the same place as the expansion tab. They will work just the same on any PCB that can fit PCB mount Cherry stabilizer.
Good to know, thanks clarifying.
Post by: nathairtras on Tue, 12 August 2014, 12:22:26
Post by: domoaligato on Tue, 12 August 2014, 12:37:37
PCB mount have the same mounting dimension whether it is clip in or bolt. The bolt is the only difference, and does go in the same place as the expansion tab. They will work just the same on any PCB that can fit PCB mount Cherry stabilizer.:thumb:
Can we order bolt mounted?
Post by: IvanIvanovich on Tue, 12 August 2014, 13:23:59
Post by: yicaoyimu on Tue, 12 August 2014, 13:53:04
It depends what they have available. I still don't know yet.
Shall we wait for GMK's response before collecting payment?
Post by: domoaligato on Tue, 12 August 2014, 14:50:51
It depends what they have available. I still don't know yet.
thanks!
Post by: korrelate on Tue, 12 August 2014, 16:18:46
Ya, I would be interested in the bolt stabs as well. Mainly because I have never seen them before, so that makes me want to try them. Oh and because pcb mount stabs always come out on me when I pull tight keycaps, which is annoying...
My interest in this GB stems from exactly the same problem. When I built my TrikX I used the stabs and wires that Team Redline include with the PCB, Case, etc. To be fair, they included way more wires than I needed but now I'm thinking it's because they were manufactured by a third party (the wires, at least, if not the Stabs also).
Most of them are working very well (and they are much, much better than the Plate Mounts that came on my Leopold .. my first mech... back when EK first swapped over from Filco) with one exception: my numpad zero: the wire on that stab always pops out when I pull that key off. Fortunately, I've settled on my favorite colorway (WoB) and they have stayed put from some time. Also fortunately, this stab wire has to be the best stab wire to have this problem with: I can just take the PCB and that stab wire is right down there are the edge of the board and I can pop it back in with precision screwdriver.
That said... I am hoping that my problem is merely that the OD of the stab wires that Trik provided is (however slightly) too small and that swapping this out with a (hopefully) closer-to-spec stab wire from Cherry sorts this all out.
Cheers,
K
Post by: damorgue on Wed, 13 August 2014, 15:48:03
It depends what they have available. I still don't know yet.
If they are the bolt version, I'll get some of those instead.
A second question, I assume everything will ship from the US, and that the PCBs will add a significant amount to the shipping costs, correct?
Post by: jevvix on Wed, 13 August 2014, 20:09:55
Post by: strict on Wed, 13 August 2014, 20:21:52
Post by: Oobly on Thu, 14 August 2014, 06:56:01
Post by: swill on Thu, 14 August 2014, 07:56:31
Would like to know if the bolt stabs are possible.
Post by: strict on Thu, 14 August 2014, 08:20:14
I will be buying more stabs if I can get the bolt stabs.
Would like to know if the bolt stabs are possible.
Same here. If it's confirmed we can get bolt mount I will almost certainly double my order for pcb stabs.
Post by: yicaoyimu on Thu, 14 August 2014, 10:47:21
I will be buying more stabs if I can get the bolt stabs.
Would like to know if the bolt stabs are possible.
Same here. If it's confirmed we can get bolt mount I will almost certainly double my order for pcb stabs.
+1 on all of the above.
Post by: IvanIvanovich on Thu, 14 August 2014, 11:33:47
Post by: korrelate on Thu, 14 August 2014, 12:01:23
Post by: IvanIvanovich on Thu, 14 August 2014, 13:16:22
Post by: strict on Thu, 14 August 2014, 13:20:13
It will be an either or deal. Either all bolt in type or all clip in type. I am not interested in checking with everyone on which types they want or redoing the entire order form and collection process.
Totally fine with this. Thanks Ivan!
Post by: domoaligato on Thu, 14 August 2014, 14:57:42
Post by: nubbinator on Thu, 14 August 2014, 22:14:11
Post by: IvanIvanovich on Fri, 15 August 2014, 08:39:44
Post by: quochung1989 on Fri, 15 August 2014, 10:15:08
Post by: korrelate on Fri, 15 August 2014, 10:49:33
It will be an either or deal. Either all bolt in type or all clip in type. I am not interested in checking with everyone on which types they want or redoing the entire order form and collection process.
LOL: I love this approach!
Post by: qwack on Sat, 16 August 2014, 09:42:26
Post by: IvanIvanovich on Sat, 16 August 2014, 11:32:14
Post by: Synjin on Sat, 16 August 2014, 12:15:24
Post by: garrettwp on Mon, 18 August 2014, 21:39:20
Post by: Synjin on Mon, 18 August 2014, 21:41:17
Any update on invoicing? I have not received anything.
Neither have I. Let's be patient ^^
Post by: SpAmRaY on Mon, 18 August 2014, 21:41:44
Any update on invoicing? I have not received anything.
I don't believe he has started just yet.
Post by: Synjin on Mon, 18 August 2014, 22:06:15
Post by: cphead on Tue, 19 August 2014, 00:42:20
Post by: IvanIvanovich on Tue, 19 August 2014, 08:29:48
Post by: DanielT on Tue, 19 August 2014, 08:32:54
Post by: damorgue on Tue, 19 August 2014, 09:33:25
I tend to stay away from PCB mounted but if they turn into bolt-mounted you can add me to the list of people who would be interested.
Post by: DanielT on Tue, 19 August 2014, 09:39:12
Post by: Fnzzy on Tue, 19 August 2014, 09:42:39
Post by: GeorgeK on Tue, 19 August 2014, 09:50:20
Post by: evolveS on Tue, 19 August 2014, 10:01:28
Post by: byker on Tue, 19 August 2014, 10:40:13
Post by: cooldiscretion on Tue, 19 August 2014, 12:59:42
Post by: Vitaly on Tue, 19 August 2014, 13:50:31
Ivan if you have extra G H B keycaps (or other 3x1u from this rows) from GMK DOLCH GB please include in invoice and ship together. Thank you
Post by: tgujay on Tue, 19 August 2014, 14:05:07
Post by: IvanIvanovich on Tue, 19 August 2014, 14:21:47
Yes, we will be getting the bolt type for PCB mount.
Post by: mashby on Tue, 19 August 2014, 15:30:49
Yes, we will be getting the bolt type for PCB mount.
And I hang my head in shame that I didn't fill out a form in time. :-[
Post by: Fnzzy on Tue, 19 August 2014, 15:37:03
Yes, we will be getting the bolt type for PCB mount.
Wow, why didn't I order more? Now I only got a handful :(
Post by: damorgue on Tue, 19 August 2014, 16:21:49
Yes, we will be getting the bolt type for PCB mount.
Wow, why didn't I order more? Now I only got a handful :(
You can change your order as long as you haven't paid the invoice. I think Ivan has mentioned it a few times.
Thanks for the quick update Ivan. Paid
Post by: IvanIvanovich on Tue, 19 August 2014, 16:32:20
Post by: qwack on Tue, 19 August 2014, 16:33:26
Post by: IvanIvanovich on Tue, 19 August 2014, 17:04:23
Post by: xavierblak on Tue, 19 August 2014, 17:50:33
Post by: JaccoW on Tue, 19 August 2014, 17:56:19
Post by: geniekid on Tue, 19 August 2014, 17:58:31
Post by: HoffmanMyster on Tue, 19 August 2014, 18:03:28
Also paid. :thumb:
Post by: tjweir on Tue, 19 August 2014, 18:10:57
Post by: quochung1989 on Tue, 19 August 2014, 18:34:04
Post by: xandr on Tue, 19 August 2014, 18:39:27
Post by: IvanIvanovich on Tue, 19 August 2014, 18:40:31
Post by: lionblinds on Tue, 19 August 2014, 18:54:14
Post by: Chemisery on Tue, 19 August 2014, 19:10:28
Post by: echo0 on Tue, 19 August 2014, 19:45:48
Post by: user 18 on Tue, 19 August 2014, 20:00:47
Post by: TBone on Tue, 19 August 2014, 20:30:20
Post by: twiddle on Tue, 19 August 2014, 20:35:53
Post by: Vitaly on Tue, 19 August 2014, 21:53:37
Post by: Synjin on Tue, 19 August 2014, 22:05:17
Post by: quake4mhg on Tue, 19 August 2014, 23:58:16
Post by: TLSC.wipeOut on Wed, 20 August 2014, 01:02:45
Post by: cmadrid on Wed, 20 August 2014, 02:57:34
Post by: Krinto on Wed, 20 August 2014, 02:59:40
Post by: Synjin on Wed, 20 August 2014, 05:47:02
Paid. First GB (and post i think) ;D Now just to work out which 60% board to get from the running buys...
You can always get a viper or eagle like I did
Post by: Synjin on Wed, 20 August 2014, 05:47:58
Post by: JaccoW on Wed, 20 August 2014, 06:43:01
Post by: Oobly on Wed, 20 August 2014, 06:58:47
Post by: bubuchacha251 on Wed, 20 August 2014, 08:01:22
Post by: Oobly on Wed, 20 August 2014, 08:09:26
Post by: Synjin on Wed, 20 August 2014, 08:26:29
Post by: IvanIvanovich on Wed, 20 August 2014, 11:17:08
Post by: LechnerDE on Wed, 20 August 2014, 11:45:22
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?
How much were you charged?
My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable :)
Paid! :thumb:
Post by: Oobly on Wed, 20 August 2014, 11:58:58
Post by: Fnzzy on Wed, 20 August 2014, 13:18:03
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?
How much were you charged?
My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable :)
Paid! :thumb:
I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast :thumb:
Post by: christkind on Wed, 20 August 2014, 13:24:31
Post by: LechnerDE on Wed, 20 August 2014, 13:54:14
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?
How much were you charged?
My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable :)
Paid! :thumb:
I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast :thumb:
Ah ok, so you are now down to 2$ as well or nothing at all?
Post by: Fnzzy on Wed, 20 August 2014, 14:32:26
Hey Ivan, just got your invoice. I got charged for shipping cost. Will it not be shipped with my Dolch order or did I order so many stabs that you have to send an extra package?
How much were you charged?
My invoice said 2$ for shipping for about 40 stabs that will be shipped with my Dolch Set. I think that's totally neglectable :)
Paid! :thumb:
I ordered 11 stabs in total and got charged $7 for shipping to germany. But the issue has been resolved. He simply missed me while crosschecking and corrected the invoice really fast :thumb:
Ah ok, so you are now down to 2$ as well or nothing at all?
No shipping cost at all.
Post by: IvanIvanovich on Wed, 20 August 2014, 14:43:06
Mistakes were bound to happen and have. If you feel I am wrong don't hesitate to bring it to my attention BEFORE you pay as it is a little easier for me.
Post by: Synjin on Wed, 20 August 2014, 17:48:21
Post by: cmadrid on Thu, 21 August 2014, 10:30:37
Post by: swill on Thu, 21 August 2014, 16:03:23
Post by: apathy3cs on Thu, 21 August 2014, 19:17:52
Post by: Distilled on Fri, 22 August 2014, 19:05:44
Post by: Synjin on Fri, 22 August 2014, 19:48:53
Post by: lewi on Sat, 23 August 2014, 00:33:54
Post by: o3okevin on Sat, 23 August 2014, 03:29:22
Post by: Shinryuu on Wed, 27 August 2014, 15:55:18
Post by: durandalx on Wed, 27 August 2014, 19:01:27
Post by: durandalx on Thu, 28 August 2014, 09:20:54
Post by: IvanIvanovich on Thu, 04 September 2014, 08:48:32
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60
Post by: JaccoW on Thu, 04 September 2014, 08:59:34
Order placed.I guess it's safe to say we have finally hit a GMK MOQ overwhelmingly :P
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60
Post by: user 18 on Thu, 04 September 2014, 09:59:52
Post by: IvanIvanovich on Thu, 04 September 2014, 10:29:08
Post by: Cafiend on Sat, 06 September 2014, 14:20:19
If anyone has an extra 6.25 space bar or 2 I would purchase at a premium price!
Post by: chzel on Thu, 11 September 2014, 16:00:44
Order placed.
Orders (total):
2.x PCB - 2500
2.x PLT - 2600
6.25 PCB - 500
6.25 PLT - 600
7 PCB - 400
7 PLT - 350
PCB w/ MX blacks - 60
Do we know yet whether the PCB mounted are going to be bolt or clip?
Post by: user 18 on Thu, 11 September 2014, 17:41:22
Yes, we will be getting the bolt type for PCB mount.
Post by: chzel on Thu, 11 September 2014, 17:53:56
Post by: nubbinator on Thu, 11 September 2014, 20:34:11
Yes, we will be getting the bolt type for PCB mount.
I should have bought more. But YAY!!
Post by: Synjin on Fri, 12 September 2014, 00:55:39
I feel yaYes, we will be getting the bolt type for PCB mount.
I should have bought more. But YAY!!
Post by: domoaligato on Mon, 15 September 2014, 16:35:42
If I make mistake on invoice just inform me. You can email respond to the invoice also which will likely get my attention sooner and I don't have to hunt through paypals terrible site to locate it. Same goes if you require change, it's no problem to do so before you pay invoice.
Yes, we will be getting the bolt type for PCB mount.
will the gh60 gb users be getting these bolt types? please say yes...
Post by: nubbinator on Mon, 15 September 2014, 20:48:23
If I make mistake on invoice just inform me. You can email respond to the invoice also which will likely get my attention sooner and I don't have to hunt through paypals terrible site to locate it. Same goes if you require change, it's no problem to do so before you pay invoice.
Yes, we will be getting the bolt type for PCB mount.
will the gh60 gb users be getting these bolt types? please say yes...
Yes, or so I would assume since he wanted to make it all or nothing.
Post by: IvanIvanovich on Tue, 16 September 2014, 09:21:55
Post by: chzel on Tue, 16 September 2014, 09:29:52
It is my understanding that we are waiting for Dolch to finish production, right?
Post by: domoaligato on Tue, 16 September 2014, 09:55:51
Yes all the PCB mount is going to be bolt type across the board. I'm still waiting for TJ to pay the GH60 order though...
omfg thank you. this is awesome!
Post by: IvanIvanovich on Tue, 16 September 2014, 09:56:38
Post by: chzel on Tue, 16 September 2014, 11:02:48
No, we are waiting on TJ to pay me at this point so I can pay to GMK.
Ok, thanks!
Post by: Synjin on Tue, 16 September 2014, 20:36:44
No, we are waiting on TJ to pay me at this point so I can pay to GMK.I'm confused. They have already been produced and are just waiting for payments?
Post by: DanielT on Tue, 16 September 2014, 22:29:42
It's epic, even people not part of the GH60 GB are waiting for the GH60 :p :-*
Post by: LechnerDE on Wed, 17 September 2014, 01:49:23
No, we are waiting on TJ to pay me at this point so I can pay to GMK.I'm confused. They have already been produced and are just waiting for payments?
Cherry has millions of stabs in stock of course.
This is no keycap GB with custom designs or something, hence no production time for us ;)
Post by: IvanIvanovich on Wed, 17 September 2014, 09:05:44
Post by: SpAmRaY on Wed, 17 September 2014, 09:07:16
Yeah GMK has probably pallets of stabs since they are a keyboard manufacturer also. Since the GH60 order was roughly about half of this I didn't have much choice on waiting on that. I've been told a few more days at the most so as soon as I get that paid I will make the wire to GMK and they will ship once it's cleared.
Am I the only one who would love to see pictures of pallets of keyboard parts! :eek:
Also love to see the manufacturing line for stabilizers to, we need to do a 'how its made' on keyboards.
Post by: jameslr on Wed, 17 September 2014, 09:11:42
Yeah GMK has probably pallets of stabs since they are a keyboard manufacturer also. Since the GH60 order was roughly about half of this I didn't have much choice on waiting on that. I've been told a few more days at the most so as soon as I get that paid I will make the wire to GMK and they will ship once it's cleared.
Am I the only one who would love to see pictures of pallets of keyboard parts! :eek:
Also love to see the manufacturing line for stabilizers to, we need to do a 'how its made' on keyboards.
Field trip to GMK in Germany time!! Honestly, I would love to see the place, not to mention travel to Europe. I've never been.
Post by: tgujay on Thu, 18 September 2014, 08:40:36
Am I the only one who would love to see pictures of pallets of keyboard parts! :eek:
Also love to see the manufacturing line for stabilizers to, we need to do a 'how its made' on keyboards.
Nope, I too would love to see all the stabilizers. How It's Made would be awesome, the videos I've seen on keycap lasering are so cool.
Post by: HoffmanMyster on Fri, 19 September 2014, 18:53:18
Yeah GMK has probably pallets of stabs since they are a keyboard manufacturer also. Since the GH60 order was roughly about half of this I didn't have much choice on waiting on that. I've been told a few more days at the most so as soon as I get that paid I will make the wire to GMK and they will ship once it's cleared.
Am I the only one who would love to see pictures of pallets of keyboard parts! :eek:
Also love to see the manufacturing line for stabilizers to, we need to do a 'how its made' on keyboards.
Watch any one of these videos (https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1CHFX_enUS603US603&ion=1&espv=2&ie=UTF-8#q=wire+bending+machine&tbm=vid) and pretend they're bending stabilizer wires. ;)
Post by: lewi on Sat, 20 September 2014, 03:13:24
can you tell me groupbuy plan, ivan?
about shipping or something like that.
Post by: JaccoW on Sat, 20 September 2014, 12:00:34
Ordered! One step closer to making ~4 customs haha
Current status: CLOSED. Expected ETA early October.
Order deadline 15 August. Payment deadline 20 August.
Post by: IvanIvanovich on Mon, 22 September 2014, 10:54:04
Post by: strict on Mon, 22 September 2014, 11:28:01
Shipment has arrived. It may take me a few weeks to get things sorted and shipped out.
Thanks for the update, Ivan! Very excited for those bolt mount PCB stabs!
Post by: IvanIvanovich on Mon, 22 September 2014, 13:36:05
(http://i.imgur.com/JGqc8Bc.jpg)
Sorry, hard to get a decent photo of black switch black PCB in big box. 3 smaller boxes of stabilizers and the little box inside the last box is nothing but tiny bolts for the PCB mount stabs... that I have to put in each damn one.
Post by: korrelate on Mon, 22 September 2014, 15:18:34
http://www.amazon.com/PILL-COUNTING-TRAY-23087-EACH/dp/B001V9NB28/ref=sr_1_2?ie=UTF8&qid=1411417048&sr=8-2&keywords=pharmacist%27s+sorting
Ivan, if you want one of these PM and I'll have one shipped to you straight from Amazon.
Post by: samwisekoi on Tue, 23 September 2014, 11:45:27
Show Image(http://i.imgur.com/oXsrIdr.jpg)Show Image(http://i.imgur.com/JGqc8Bc.jpg)
Sorry, hard to get a decent photo of black switch black PCB in big box. 3 smaller boxes of stabilizers and the little box inside the last box is nothing but tiny bolts for the PCB mount stabs... that I have to put in each damn one.
Tiny bolts? Where do the tiny bolts go? I am unfamiliar with tiny bolts on PCB-mount stabs.
Also, I am about to order bulk stabs from GON, so if you have cancellations or spares, I am happy to pay for them!
- Ron | samwisekoi
Post by: strict on Tue, 23 September 2014, 11:48:43
Show Image(http://i.imgur.com/oXsrIdr.jpg)Show Image(http://i.imgur.com/JGqc8Bc.jpg)
Sorry, hard to get a decent photo of black switch black PCB in big box. 3 smaller boxes of stabilizers and the little box inside the last box is nothing but tiny bolts for the PCB mount stabs... that I have to put in each damn one.
Tiny bolts? Where do the tiny bolts go? I am unfamiliar with tiny bolts on PCB-mount stabs.
Also, I am about to order bulk stabs from GON, so if you have cancellations or spares, I am happy to pay for them!
- Ron | samwisekoi
These are slightly different than the normal clip on PCB stabs most people are familiar with.
(https://farm4.staticflickr.com/3881/14371669486_71eff25725_b.jpg)
Post by: IvanIvanovich on Tue, 23 September 2014, 11:56:57
Post by: JaccoW on Tue, 23 September 2014, 12:18:59
Post by: korrelate on Tue, 23 September 2014, 12:29:48
Post by: HoffmanMyster on Tue, 23 September 2014, 12:34:18
Is it just me or do the bolt versions come without those springy-feet that I've clipped off of all my stabs?
All Cherry stabilizer sliders will have the little feet that "should" be clipped.
Post by: IvanIvanovich on Tue, 23 September 2014, 13:31:05
Post by: HoffmanMyster on Tue, 23 September 2014, 18:31:37
The original ones didn't have the little shock thingies on the bottom... these new ones do.
Oh, I meant that newly purchased ones will. I was unsure of the originals. Thanks for clarifying, Ivan.
Post by: Karura on Fri, 03 October 2014, 21:02:55
I would like to buy some of these stabilizers. Does anyone have extras to sell me, or any stores to re-sell these?
I have finally decided to build my own keyboard, so would need these :D
Please let me know :)
Post by: Synjin on Fri, 03 October 2014, 21:20:55
Post by: pichu23 on Sat, 04 October 2014, 08:01:24
Post by: IvanIvanovich on Sat, 04 October 2014, 10:00:06
Post by: Synjin on Sat, 04 October 2014, 11:52:02
Post by: IvanIvanovich on Thu, 09 October 2014, 17:18:35
Post by: Synjin on Thu, 09 October 2014, 17:45:23
Post by: pichu23 on Thu, 09 October 2014, 18:08:09
Shipping is begun.
Any leftovers ? Would like if I can get it shipped with the Dolch I've ordered :D
Post by: Gh05tx on Thu, 09 October 2014, 18:08:29
Me tooShipping is begun.
Any leftovers ? Would like if I can get it shipped with the Dolch I've ordered :D
Post by: strict on Thu, 09 October 2014, 18:11:52
Dibs on a 7x plate or pcb if there's any extra :cool:
Post by: feizor on Sat, 11 October 2014, 23:42:39
Post by: Delete on Sun, 12 October 2014, 04:20:54
Post by: Synjin on Sun, 12 October 2014, 09:04:53
@ IvanIvanovichDid you not see his previosu post saying that they are already shipping?
i have five PCBs waitting for your stabilizers Half a year 、
please shipping it sooooon。。。。。
Post by: SpAmRaY on Sun, 12 October 2014, 09:20:23
@ IvanIvanovichYou are kidding right? Or are you just a troll?
i have five PCBs waitting for your stabilizers Half a year 、
please shipping it sooooon。。。。。
This group buy hasn't been going on for 6 months (first post was almost 4 months), payment deadline was just 6 weeks ago.
Estimated delivery in the OP says October and he is working on shipping them now.
I hope people realize a group buy isn't like ordering from a store. You are joining with hundreds of other people to get a discount on something you probably wouldn't be able to buy otherwise.
And Ivan is awesome just for getting us the opportunity to buy these and dedicating his time for the cause.
Post by: ninjadoc on Sun, 12 October 2014, 10:33:04
Post by: jorgenslee on Sun, 12 October 2014, 20:34:39
@ IvanIvanovichYou are kidding right? Or are you just a troll?
i have five PCBs waitting for your stabilizers Half a year 、
please shipping it sooooon。。。。。
This group buy hasn't been going on for 6 months (first post was almost 4 months), payment deadline was just 6 weeks ago.
Estimated delivery in the OP says October and he is working on shipping them now.
I hope people realize a group buy isn't like ordering from a store. You are joining with hundreds of other people to get a discount on something you probably wouldn't be able to buy otherwise.
And Ivan is awesome just for getting us the opportunity to buy these and dedicating his time for the cause.
I assume he is just a troll or that post is lost in translation assuming he is from china.
and I hope this is what he really meant:
"I ordered 5 pcbs and I have been searching for that stabilizers(screw pcb mount) for half a year now. Excited to get it soonn!!!!!" :D
Post by: Delete on Tue, 14 October 2014, 19:40:14
Post by: demik on Tue, 14 October 2014, 19:42:16
i know the GB date ,just kidding， relax！
i just waitting for Ivan
accusing somebody of taking forever when they aren't isnt joke worthy bruh.
Post by: IvanIvanovich on Wed, 15 October 2014, 00:52:14
Post by: Karura on Wed, 15 October 2014, 06:49:22
If anyone has extras, let me know :)
Post by: pichu23 on Wed, 15 October 2014, 07:03:41
I'm looking for :
7 x 2.x,
1 x 6.25 &
1 x 7
All pcb mounted :D
Thanks :)
Post by: strict on Wed, 15 October 2014, 07:44:35
Here is a picture with the wire flipped from how I received it.
(https://imgur.com/T85nV9R.jpg)
Post by: kekkon on Wed, 15 October 2014, 08:31:30
I seem to be having an issue with my 6.25x plate mount stabs. They are the right length but the bend in the wire is rubbing and causing the stab to hang. With the bend facing upwards (how I received it) I can't even get the stab installed, if I flip the wire so the bend is facing downwards I can at least get it into the plate but then it sticks down well past the bottom of the switch and rubs against the PCB. Am I doing something wrong? I have essentially zero experience messing with Cherry stabs so if someone could drop some knowledge on me it would be much appreciated.
Here is a picture with the wire flipped from how I received it.Show Image(https://imgur.com/T85nV9R.jpg)
I might be wrong, but based on the picture..you have install the stab wrongly i assumed.
Can you take a picture on how the stab look alone? :)
Post by: pichu23 on Wed, 15 October 2014, 08:36:39
I seem to be having an issue with my 6.25x plate mount stabs. They are the right length but the bend in the wire is rubbing and causing the stab to hang. With the bend facing upwards (how I received it) I can't even get the stab installed, if I flip the wire so the bend is facing downwards I can at least get it into the plate but then it sticks down well past the bottom of the switch and rubs against the PCB. Am I doing something wrong? I have essentially zero experience messing with Cherry stabs so if someone could drop some knowledge on me it would be much appreciated.
Here is a picture with the wire flipped from how I received it.Show Image(https://imgur.com/T85nV9R.jpg)
try dissembling it? the wire on my boards are mostly at the top not below. that might help. not too sure. cause i think i saw some board that has the wire at the bottom.
Post by: CPTBadAss on Wed, 15 October 2014, 08:39:33
Show Image(https://imgur.com/T85nV9R.jpg)
I think that's the wrong wire. Shouldn't the 6.25x wire be straight? That looks like the Costar wire.
Here's a picture of the wire from the GH60 GB thread (http://geekhack.org/index.php?topic=41464.0):
(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17059;image)
Edit: Actually now I'm confused since I just found these pictures (http://deskthority.net/keyboards-f2/cherry-key-stabilizers-t143.html#p2112). The only reason why I said it's the wrong wire because on one of my boards, I couldn't get that bent wire to work with my plate mounted stabs and had to use the wire that was in the above image.
Post by: strict on Wed, 15 October 2014, 09:08:35
Show Image(https://imgur.com/T85nV9R.jpg)
I think that's the wrong wire. Shouldn't the 6.25x wire be straight? That looks like the Costar wire.
Here's a picture of the wire from the GH60 GB thread (http://geekhack.org/index.php?topic=41464.0):Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17059;image)
Edit: Actually now I'm confused since I just found these pictures (http://deskthority.net/keyboards-f2/cherry-key-stabilizers-t143.html#p2112). The only reason why I said it's the wrong wire because on one of my boards, I couldn't get that bent wire to work with my plate mounted stabs and had to use the wire that was in the above image.
My PCB mount stabs have the bend in them as well and they look just like the pictures from the deskthority link. I was under the impression I needed the unbent wire for the plate mount stab though.
This (https://imgur.com/7AGKeJP.jpg) is the only other picture of the plate mount stab I have access to at the moment. I've tried installing it every way possible, flipping the wire and flipping the orientation of the stabs and no matter which way I try it hangs. Is it a problem with my plate?
Post by: Moralless on Wed, 15 October 2014, 09:09:03
Show Image(https://imgur.com/T85nV9R.jpg)
I think that's the wrong wire. Shouldn't the 6.25x wire be straight? That looks like the Costar wire.
Here's a picture of the wire from the GH60 GB thread (http://geekhack.org/index.php?topic=41464.0):Show Image(http://geekhack.org/index.php?action=dlattach;topic=41464.0;attach=17059;image)
Edit: Actually now I'm confused since I just found these pictures (http://deskthority.net/keyboards-f2/cherry-key-stabilizers-t143.html#p2112). The only reason why I said it's the wrong wire because on one of my boards, I couldn't get that bent wire to work with my plate mounted stabs and had to use the wire that was in the above image.
Well if you look at the Cherry stabs from qwer (http://www.qwer.io/shop/accessories/6-25u-cherry-stabilisers/) the wires for 6.25 is also bent. I haven't had any experience with those wires, but I have a corsair k65 that also uses cherry stabs and its wire is straight and thats plate mounted.
Post by: chzel on Wed, 15 October 2014, 09:53:39
Plate mount stabs should come with straight wire and work fine with a plate.
I guess Cherry meant the PCB stabs to be used only with PCB-mount switches. Sth like "If you have a plate use plate-mount stabs". ;D
You can easily bend your own stab wire from 1,5mm - 1,6mm stiff wire (piano wire) 100mm wide CtC, length of legs ~12mm IIRC.
Post by: Gh05tx on Thu, 16 October 2014, 06:24:20
Post by: yuiop on Thu, 16 October 2014, 06:47:15
People who bought x7 or x6.2 pcb mounted stabs to use for their custom builds could have this problem.
They'll most likely have to bend their own wires due to vast majority of custom keyboards having pcb stab + plate combo.
Post by: Nuum on Thu, 16 October 2014, 12:32:39
Post by: esoomenona on Thu, 16 October 2014, 12:36:36
Post by: pix3l_fodder on Thu, 16 October 2014, 14:57:24
Post by: JaccoW on Thu, 16 October 2014, 16:53:03
ugh, this is annoying I thought the stabs would be a complete package.They are, it's just that custom boards use custom stabs. ;)
Post by: strict on Mon, 20 October 2014, 12:36:04
Post by: DanielT on Mon, 20 October 2014, 12:39:05
Post by: strict on Mon, 20 October 2014, 12:52:47
The plate ones have straight wire, only the PCB mount has the bent one. And this is only for the 6.25 the 7u has only straight wire.
The 6.25 Cherry plate stabs I received have the bend in them
Post by: yuiop on Mon, 20 October 2014, 14:54:37
Not trying to cause more static but what does this mean for the GH60 orders that the Cherry plate stabs wont fit into the plates? Is there going to be someone making wires for those that I could sweet-talk into making some wires for me?
PM me your address. I'll send you one.
Post by: IvanIvanovich on Tue, 21 October 2014, 07:43:58
Post by: LechnerDE on Tue, 21 October 2014, 08:18:27
Due to the issue with proper operation with the bent wire on the 6.25 PCB mount. Those of you who ordered them that hasn't been sent out yet order will be delayed until some replacement straight 6.25 wires arrive to me in about 3 weeks. Those that already had the order sent out I will be happy to send again for cost of postage.
If I am not mistaken you already shipped my order.
Could you please hold onto my replacement wires until you ship the PBT BlackOnBlack dyesubs?
Post by: jorgenslee on Tue, 21 October 2014, 08:42:20
Due to the issue with proper operation with the bent wire on the 6.25 PCB mount. Those of you who ordered them that hasn't been sent out yet order will be delayed until some replacement straight 6.25 wires arrive to me in about 3 weeks. Those that already had the order sent out I will be happy to send again for cost of postage.
If my order was not sent yet, can you send it otherwise? I have an extra 6.25 wire and I'm just gonna use the 7x anyway.
Post by: IvanIvanovich on Tue, 21 October 2014, 09:01:42
Post by: nubbinator on Tue, 21 October 2014, 09:05:36
Post by: DanielT on Tue, 21 October 2014, 09:16:06
Post by: Synjin on Tue, 21 October 2014, 09:33:05
Post by: IvanIvanovich on Tue, 21 October 2014, 09:41:51
Post by: Vitaly on Tue, 21 October 2014, 09:42:42
I meant PLATE mount 6.25... too early. For those of you who don't care about this issue I can still send the order, just let me know.Send the order, new keyboard waiting for Dolch. Wire not a problem.
Post by: SpAmRaY on Tue, 21 October 2014, 10:23:48
I can wait another 3 weeks. Thanks for getting this resolved Ivan.
+1
Post by: GeorgeK on Tue, 21 October 2014, 10:31:06
Post by: Synjin on Tue, 21 October 2014, 10:48:06
Post by: phatdood9 on Tue, 21 October 2014, 11:43:50
Unless you had novelty dyesub keycap, your stabs order not send yet. I stopped sending them after the problem with the plate 6.25 was brought up until I had gotten something worked out to deal with it. Those order that aren't effected should be send out this week.
Sorry to be "that guy," but does that mean 7x and 2x stabs are all good to go?
Excited to build up my vipers :))
Post by: christkind on Tue, 21 October 2014, 12:02:14
I meant PLATE mount 6.25... too early. For those of you who don't care about this issue I can still send the order, just let me know.You can send my order anyway, only care about the 7 plate mount. If that's not too much trouble for you. :)
Post by: IvanIvanovich on Tue, 21 October 2014, 13:01:38
Post by: GeorgeK on Tue, 21 October 2014, 13:03:42
Post by: IvanIvanovich on Tue, 21 October 2014, 13:18:18
Post by: christkind on Tue, 21 October 2014, 13:56:21
Yes the Plate 2.x and 7 are fine as are all the PCB mount. Only plate 6.25 has issue. If you didn't order plate 6.25 or don't care about the problem and tell me so I will be shipping your orders this week.OK thanks, don't care for the 6.25 one. Do you want me to send you a PM or is this good?
Post by: Lubed Up Slug on Tue, 21 October 2014, 22:31:59
Post by: Synjin on Tue, 21 October 2014, 22:36:19
How do we know if our order has been shipped yet?I just asked this question earlier. I was told that the only orders that had already shipped are the ones which contained some novelty keycaps.
Post by: Lubed Up Slug on Tue, 21 October 2014, 22:45:04
How do we know if our order has been shipped yet?I just asked this question earlier. I was told that the only orders that had already shipped are the ones which contained some novelty keycaps.
Oh I see my bad
Post by: IvanIvanovich on Fri, 24 October 2014, 16:44:16
If you feel it's simply not worth it, I can see about refund/transfer PCB to another buyer.
Post by: Flamingchook on Fri, 24 October 2014, 20:57:20
Some of you international that ordered PCB may receive email from me request for additional shipping. This will mostly apply to those that ordered more than 1 as it seems to be a more significant price difference. I'm not sure if the prices went up on shipping or if I simply grossly underestimated the weight of those PCB but don't be surprised by this. Sorry for any inconvenience but I simply can't afford to cover the difference.
If you feel it's simply not worth it, I can see about refund/transfer PCB to another buyer.
Thanks for the heads up Ivan.
Post by: IvanIvanovich on Fri, 24 October 2014, 23:11:00
Post by: RickyJ on Sat, 25 October 2014, 00:04:22
Post by: Vitaly on Sat, 25 October 2014, 04:00:23
RU is shipped...Great! :thumb:
Post by: christkind on Wed, 29 October 2014, 12:34:25
AT - RU is shipped... unless your order is waiting for correct plate 6.25 parts.Amazing! Only 3 days to Austria :) Thank you so much! :thumb:
Post by: IvanIvanovich on Thu, 30 October 2014, 19:05:20
As soon as I get in the replacement correct straight 6.25 wires for those I will finish sending the rest of orders.
Post by: LechnerDE on Fri, 31 October 2014, 06:42:17
Thanks for the GB Ivan :thumb:
(http://i.imgur.com/uV5lwTc.jpg)
Post by: Karura on Fri, 31 October 2014, 13:19:05
Please let me know if anyone has extras that they can sell me. Any size is good.
Post by: SpAmRaY on Fri, 31 October 2014, 13:33:40
Hello, just wanted to say that I'm looking for PCB-mounted (new, not the screw ones) stabs.
Please let me know if anyone has extras that they can sell me. Any size is good.
All of the PCB mount stabilizers sold in this group buy are the screw type. Is there a reason you don't want to use them?
Post by: DanielT on Fri, 31 October 2014, 13:42:32
Post by: TBone on Sat, 01 November 2014, 18:49:06
Do you have an ETA on the correct 6.25 stabs? Thanks for doing this again!
Post by: IvanIvanovich on Sat, 01 November 2014, 19:26:15
Post by: Synjin on Sat, 01 November 2014, 21:38:55
Post by: nubbinator on Sat, 01 November 2014, 21:47:32
So it would be approximately a month from now plus one to two weeks shipping to us?
Probably a little longer. You need to factor in sorting time as well. Ivan is reliable though and it will get done.
Post by: Synjin on Sat, 01 November 2014, 21:52:53
Post by: Synjin on Mon, 03 November 2014, 18:34:58
Post by: JaccoW on Tue, 04 November 2014, 03:29:42
Just wished I had ordered more screw-on stabilizers.
Did anybody get the PCB to work yet?
Post by: GeorgeK on Tue, 04 November 2014, 04:26:07
I had a 2x stabilizer with a PCB on one end and a plate mount on the other. Don't really mind though.
I had a similar thing with my 7x plate mount - luckily I had a spare plate mount plastic bit kicking round...
Post by: IvanIvanovich on Tue, 04 November 2014, 09:19:08
Post by: JaccoW on Tue, 04 November 2014, 09:31:34
Seriously? :rolleyes:Yes.
I can shoot a picture if you want.
Post by: IvanIvanovich on Tue, 04 November 2014, 09:58:15
Post by: GeorgeK on Tue, 04 November 2014, 11:23:21
Seriously? :rolleyes:
Yeah - weird right? Weirder still it wasn't one of the screw in types that came with the pcb mount ones but one of the ones with the little expanding clip bit...
Post by: JaccoW on Tue, 04 November 2014, 11:49:32
Same here...Seriously? :rolleyes:Yeah - weird right? Weirder still it wasn't one of the screw in types that came with the pcb mount ones but one of the ones with the little expanding clip bit...
Stabilizer Bros! :D
Post by: IvanIvanovich on Tue, 04 November 2014, 12:01:29
Post by: Oobly on Fri, 07 November 2014, 08:32:55
Got my PCB's with Black switches along with my Dolch sets! Awesomesauce!
Post by: Karura on Sat, 08 November 2014, 05:30:28
Post by: tjweir on Sun, 09 November 2014, 17:39:31
Did anyone make the opposite mistake I did, and have plate mount rather than PCB mount?
Thanks.
Post by: Karura on Sun, 09 November 2014, 18:19:39
Doh, I bought PCB mount stabilizers and I need plate mount. Oops.
Did anyone make the opposite mistake I did, and have plate mount rather than PCB mount?
Thanks.
Yep, what sizes for the spacebar did you get? What a coincidence man... :D
Post by: tjweir on Sun, 09 November 2014, 18:31:29
Post by: Karura on Tue, 18 November 2014, 15:04:18
Just a heads up that I'm still looking for PCB stabs; I have a bunch of Plates (4x 7u, 8x 2u) stabs for trade :)
To clarify, I'm looking for the ones on the right side (PCB):
(http://i.imgur.com/5mtzuQs.jpg)
PM me if you got some and would like to swap. :thumb:
Post by: TBone on Mon, 01 December 2014, 14:11:00
Post by: IvanIvanovich on Mon, 01 December 2014, 14:58:13
Post by: JBert on Tue, 16 December 2014, 06:03:20
Post by: Synjin on Tue, 16 December 2014, 06:53:51
So, any updates on stabilizers for the GH60?he is still waiting for the corrected wires. Before he can supply the GB
Post by: MGH on Sat, 03 January 2015, 17:07:04
Post by: SpAmRaY on Tue, 13 January 2015, 06:50:59
Post by: IvanIvanovich on Thu, 15 January 2015, 10:14:33
If you want to have the order sent anyway as it is now, just a reminder that is still a choice.
Post by: Bromono on Thu, 15 January 2015, 10:16:15
Post by: digi on Thu, 15 January 2015, 17:09:20
If anyone received theirs and dont need them. ill pick them up from you. I'll need some for the Red Scarf
ditto
Post by: Synjin on Sat, 17 January 2015, 01:19:36
So I finally got some update on the wires. Apparently Cherry Europe, who GMK usually deal with are out of these parts and have no plans to make them any time soon. GMK is going to try sourcing from Cherry Asia... it will probably be a while longer. Sorry for the long waiting.Not a big deal for me as long as I still get my remaining correct size stabs and my screws <3
If you want to have the order sent anyway as it is now, just a reminder that is still a choice.
Post by: trizkut on Sat, 17 January 2015, 01:25:43
So I finally got some update on the wires. Apparently Cherry Europe, who GMK usually deal with are out of these parts and have no plans to make them any time soon. GMK is going to try sourcing from Cherry Asia... it will probably be a while longer. Sorry for the long waiting.
If you want to have the order sent anyway as it is now, just a reminder that is still a choice.
Cherry just does NOT want to be liked in 2015 it seems... :))
Post by: cmadrid on Fri, 13 February 2015, 19:46:08
Post by: IvanIvanovich on Sat, 14 February 2015, 08:42:30
Post by: bueller on Sat, 14 February 2015, 08:49:01
Post by: IvanIvanovich on Sat, 14 February 2015, 08:54:29
Post by: bueller on Sat, 14 February 2015, 08:57:14
There may be some leftovers, but I won't be selling them until after all the original orders have been shipped out.
Cool cheers for the heads up man, I'll keep an eye on this.
Post by: FreeCopy on Sat, 14 February 2015, 09:44:13
Should have them in about 2 weeks.
How are you working out combining shipping? For instance this and the black on black pbt sets. Is it a matter of how close they get shipped to you or are you shipping out as things are ready?
Post by: IvanIvanovich on Sat, 14 February 2015, 10:06:14
Post by: cmadrid on Sat, 14 February 2015, 23:58:41
Looks like I might have to figure out how to solder soon..
Post by: IvanIvanovich on Thu, 19 February 2015, 08:04:40
New ones on the right, on the way :thumb:
Post by: SpAmRaY on Thu, 19 February 2015, 08:14:24
#thehypeistoomuch
Post by: qwack on Thu, 19 February 2015, 08:36:35
Post by: IvanIvanovich on Thu, 19 February 2015, 08:39:30
Post by: qwack on Thu, 19 February 2015, 11:54:08
Post by: Sifo on Sun, 22 February 2015, 19:53:08
Post by: byker on Sun, 22 February 2015, 19:59:17
Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.
Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.
Post by: Sifo on Sun, 22 February 2015, 22:21:08
Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.
Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.
Ah okay thank you for the headsup.
Post by: byker on Sun, 22 February 2015, 22:32:08
Wait so were these ever sent out? I was looking through my list of stuff that's supposed to be coming in the mail and this was still on it. I kinda just forgot about them.
Did you order spacebar stabs? Any orders without those were sent out, if you ordered them they are coming soon.
Ah okay thank you for the headsup.
No problem. Long story short, the original spacebar stabs that were sent to Ivan were bent wire, not straight. Then there has been a long wait, but apparently they are on their way in two weeks!
Post by: quochung1989 on Mon, 23 February 2015, 06:54:09
Post by: bueller on Fri, 27 February 2015, 04:39:47
Post by: cmadrid on Fri, 27 February 2015, 09:29:04
Post by: bueller on Fri, 27 February 2015, 09:33:18
I can't even remember what I ordered anymore, but if you're still looking when my order gets shipped to me, I might be able to help out ;)
Looks like I've got it sorted, thanks :)
Post by: cmadrid on Fri, 27 February 2015, 09:33:42
Post by: Karura on Sun, 01 March 2015, 02:34:34
Also, if someone has the screw-type PCB stabs, could you sell some to me?
Post by: rpeterclark on Sun, 01 March 2015, 16:09:26
Post by: i3oilermaker on Sun, 01 March 2015, 23:21:59
I wish I caught this GB, stabs are so hard to find at a reasonable price. If there are any extras, or if someone overbought, I am very interested in a set and more of possible.
Techkeys will have extras
Post by: rpeterclark on Mon, 02 March 2015, 06:13:06
I wish I caught this GB, stabs are so hard to find at a reasonable price. If there are any extras, or if someone overbought, I am very interested in a set and more of possible.
Techkeys will have extras
That's fantastic news! Thanks!
Post by: IvanIvanovich on Sat, 07 March 2015, 11:52:30
Post by: Synjin on Sat, 07 March 2015, 11:58:37
I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.Awesome :P Hype train starts again. ChooChooo
Post by: pasph on Sat, 07 March 2015, 12:29:18
I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.
Great news i'll wait stabs and dolch (and GH60 when it will be)
Post by: nubbinator on Sat, 07 March 2015, 15:20:25
I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.
Fantastic news.
Post by: TheOpposition on Sat, 07 March 2015, 23:04:42
Post by: fl0w3n on Sat, 07 March 2015, 23:59:52
I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.
I have not been checking in on GH much, so I don't know all the details, but thank you for taking over this GB and getting it finished up. I can't wait to get mine built.
P.S. The Amiga keeps staring me in the face saying complete me!
Post by: IvanIvanovich on Thu, 12 March 2015, 20:26:01
Post by: cmadrid on Thu, 12 March 2015, 20:59:14
Post by: swill on Thu, 12 March 2015, 21:22:39
Just to let you guys know, I am running slow on getting these out. There were many more orders left than I thought, and counting out a bunch of small bits takes long time. I estimate another week or something like that before I am finished.
No worries dude. Take your time, we are not stressed about it. :)
Post by: cmadrid on Thu, 12 March 2015, 23:40:51
Just to let you guys know, I am running slow on getting these out. There were many more orders left than I thought, and counting out a bunch of small bits takes long time. I estimate another week or something like that before I am finished.
No worries dude. Take your time, we are not stressed about it. :)
Will be getting this and the gaterons 'soon' going to have to poke at your plate builder soon, lol
Post by: HoffmanMyster on Thu, 26 March 2015, 11:14:34
Just to let you guys know, I am running slow on getting these out. There were many more orders left than I thought, and counting out a bunch of small bits takes long time. I estimate another week or something like that before I am finished.
I know this has been addressed before, but I can't remember the verdict. :-X
Will you be shipping out the replacement straight 6.25x wires to those of us that already received the shipments without any further action from us? Do we need to compensate for shipping cost?
Post by: IvanIvanovich on Thu, 26 March 2015, 12:03:36
Or, for others that still have PBT orders and don't mind waiting a little bit more I can certainly toss them in with that quite easily.
Post by: Latin00032 on Thu, 26 March 2015, 12:36:10
I have finally received the stabilizer wires we have been waiting for. All the remaining orders will be shipped out over the next week.What!?
Skeet! Skeet! Skeet!
This is like Valve announcing HL3.
Post by: Latin00032 on Thu, 26 March 2015, 12:37:42
Post by: SpAmRaY on Thu, 26 March 2015, 13:08:07
I will need to collect shipping cost at least for sure. In most cases it shouldn't be very much.
Whenever you are caught up and/or are ready to ship those let me know and I'll toss a few bucks to cover shipping my wires.
Post by: fknraiden on Thu, 26 March 2015, 13:22:59
Post by: nubbinator on Thu, 26 March 2015, 18:21:51
Are these vintage blacks?
*sigh*
Post by: BunnyLake on Thu, 26 March 2015, 18:23:00
I will need to collect shipping cost at least for sure. In most cases it shouldn't be very much.
Or, for others that still have PBT orders and don't mind waiting a little bit more I can certainly toss them in with that quite easily.
you can pop mine in my pbt order good sir to make it easier for you
Post by: fknraiden on Thu, 26 March 2015, 18:23:30
Are these vintage blacks?
*sigh*
Sorry.. I didn't feel like reading all of the previous posts to see if it was asked before.
Post by: Karura on Thu, 26 March 2015, 22:12:54
Are these vintage blacks?
*sigh*
Sorry.. I didn't feel like reading all of the previous posts to see if it was asked before.
You could have at least read the first post man, it's right there.
Post by: lewi on Fri, 27 March 2015, 01:49:19
is there any chance to have some more pcb with blackswitch?
thankyou!
Post by: IvanIvanovich on Fri, 27 March 2015, 11:56:18
I do hope to finish shipping all the original orders soon. It has taken me much longer than I had hoped.
Post by: cmadrid on Sat, 28 March 2015, 17:09:34
Post by: Karura on Sun, 29 March 2015, 00:33:35
All extra items available will be posted as soon as I finally finish shipping out the original orders.
I do hope to finish shipping all the original orders soon. It has taken me much longer than I had hoped.
Great to hear :)
Post by: JaccoW on Mon, 30 March 2015, 02:23:00
helloI'll sell you mine if you want. 😊
is there any chance to have some more pcb with blackswitch?
thankyou!
Post by: fknraiden on Tue, 31 March 2015, 18:47:02
Are these vintage blacks?
*sigh*
Sorry.. I didn't feel like reading all of the previous posts to see if it was asked before.
You could have at least read the first post man, it's right there.
I like how you and nubs replied and neither of you answered my question. There is no clarification if they are.
Post by: trizkut on Tue, 31 March 2015, 18:53:31
I like how you and nubs replied and neither of you answered my question. There is no clarification if they are.
They are brand new surplus.
4th page man. Also 1st page says "GMK surplus." I doubt GMK has an excess of vintage blacks just lying around that they want to pawn off
Post by: nubbinator on Tue, 31 March 2015, 18:55:06
A.) #vintageblackhype *cough*placebo*cough*
B.) No one has the boards and I'm sure Ivan packed them up and didn't take the time to try and figure that out, so no one knows.
Post by: Karura on Tue, 31 March 2015, 20:30:08
Post by: IvanIvanovich on Wed, 01 April 2015, 14:49:27
Anyway, the MX switch PCB are not vintage switch. But, they don't seem to be scratchy like some of the newer boards I have encountered more recently.
Post by: swill on Wed, 01 April 2015, 15:48:15
I don't care what the non believers claim... there are real differences in vintage switch. It's no placebo, and it's not due to being worn either as I've had early production boards NIB.
Anyway, the MX switch PCB are not vintage switch. But, they don't seem to be scratchy like some of the newer boards I have encountered more recently.
Ivan would know about the 'vintage' aspect, but I agree with this statement, "they don't seem to be scratchy like some of the newer boards". They are nice and smooth... :)
Post by: FreeCopy on Thu, 02 April 2015, 00:16:50
...it's not due to being worn either as I've had early production boards NIB.
TIL. This is exactly what I thought it was about.
Post by: IvanIvanovich on Fri, 03 April 2015, 22:07:54
Whatever is left over will be posted for available purchase after that.
Post by: Giorgio on Sat, 04 April 2015, 03:06:11
Post by: duckness on Sat, 04 April 2015, 05:57:59
>waiting to buy stabs
Post by: qwack on Sat, 04 April 2015, 07:32:28
Most of these orders are now shipped. Just about a dozen or so international orders left which I hope to finish Sunday.
Whatever is left over will be posted for available purchase after that.
Nice, thanks for the update Ivan.
Post by: Thechemist on Mon, 06 April 2015, 12:20:38
Post by: mashby on Mon, 06 April 2015, 15:15:56
notworthy.gif
Post by: cmadrid on Mon, 06 April 2015, 15:18:05
Post by: FreeCopy on Mon, 06 April 2015, 18:22:36
Post by: nubbinator on Mon, 06 April 2015, 20:01:52
Post by: apathy3cs on Wed, 08 April 2015, 01:06:36
Post by: korrelate on Wed, 08 April 2015, 01:10:05
Post by: IvanIvanovich on Wed, 08 April 2015, 18:20:19
Everything is now shipped unless I specifically PM'd you about your order.
I will get what is left counted up and posted tomorrow.
Post by: SpAmRaY on Wed, 08 April 2015, 18:22:03
Post by: Karura on Wed, 08 April 2015, 19:05:36
ALL DONE!
Everything is now shipped unless I specifically PM'd you about your order.
I will get what is left counted up and posted tomorrow.
Sounds good, I look forward to it :)
Post by: SpAmRaY on Thu, 09 April 2015, 11:59:50
What about those of us who need to pay for shipping for the correct stabilizer wires?
Ivan sent you a PM about this.
Post by: Synjin on Thu, 09 April 2015, 12:03:27
ALL DONE!Did you get my message about my order that wasn't completed yet? It concerns the stab wires as well.
Everything is now shipped unless I specifically PM'd you about your order.
I will get what is left counted up and posted tomorrow.
Post by: Giorgio on Fri, 10 April 2015, 07:00:43
Post by: IvanIvanovich on Fri, 10 April 2015, 18:57:01
PCB MOUNT:
2.x - NONE
6.25 - 7
6.25 WIRE ONLY (bend type, not for use with plates) - 130 / $.20ea
7x - NONE
PLATE MOUNT:
2.x - NONE
6.25 - 9
7x - 36
MX BLACK PCB - 15 (USA BUYER ONLY PLEASE, box for these are problematic for international)
Prices same as listed in the OP unless otherwise noted.
Send PM with what you want, be specific type and size quantity. Be sure to also include your paypal email and mailing address or I will just skip over you.
Thanks
Post by: SpAmRaY on Fri, 10 April 2015, 19:18:01
Post by: IvanIvanovich on Fri, 10 April 2015, 19:43:20
jameslr
christkind
DanielT
Vitaly
eyesmiles
JotaCe
maxmalkav
Nuum
panrc
swill
CPTBadAss
TBone
chzel
admiralvorian
Clicker
JaccoW
promptcurry
strict
Grendel
nathairtras
quochung1989
watterrbottle
ninjadoc
LechnerDE
spamray
echo0
geniekid
GSimon
HoffmanMyster
bunnylake
If you want the wires, please send $1 for USA address, or $3 for international address to my paypal email to cover the shipping and cost of mailer. Please make sure you enter your username in the payment note. If you don't have a record of your invoice/paypal to locate the correct payment email, you can ask me in a PM.
THANKS
Post by: SpAmRaY on Fri, 10 April 2015, 19:44:39
Post by: duckness on Fri, 10 April 2015, 22:55:03
Available:
PCB MOUNT:
2.x - NONE
6.25 -30NONE
6.25 WIRE ONLY (bend type, not for use with plates) - 130 / $.20ea
7x - NONE
PLATE MOUNT:
2.x - 34
6.25 - 30
7x - 38
MX BLACK PCB - 15 (USA BUYER ONLY PLEASE, box for these are problematic for international)
Prices same as listed in the OP unless otherwise noted.
Send PM with what you want, be specific type and size quantity. Be sure to also include your paypal email and mailing address or I will just skip over you.
Thanks
PM Sent :thumb:! Sorry I forgot to include the subject in the PM :'(
Post by: Latin00032 on Sat, 11 April 2015, 22:56:19
Post by: quochung1989 on Sun, 12 April 2015, 08:11:34
Post by: DanielT on Sun, 12 April 2015, 11:11:53
According to my data, I owe straight type wires for 6.25 platemount to:As I'm not a plate mount switch user the bent wire never was an issue for me. So if someone else really needs those straight wires mine are for grabs, no strings attached from my side :thumb:
..........
DanielT
.............
If you want the wires, please send $1 for USA address, or $3 for international address to my paypal email to cover the shipping and cost of mailer. Please make sure you enter your username in the payment note. If you don't have a record of your invoice/paypal to locate the correct payment email, you can ask me in a PM.
THANKS
Post by: quake4mhg on Tue, 14 April 2015, 22:38:31
(http://i.imgur.com/FrgvH1n.jpg)
Post by: beltet on Thu, 16 April 2015, 00:04:54
But realized now that I have ordered wrong stabs. I ordered many platemounted stabs. But now I need PCB mount :D.
EDIT:
Saw now that one of the stabs is broken. Anyway... Do you have more PCB stabs left? Dont care what size it is. Just want those screw stabs.
Post by: fknraiden on Thu, 16 April 2015, 00:27:45
Post by: qwack on Fri, 17 April 2015, 07:10:31
Post by: Sifo on Sat, 18 April 2015, 00:50:24
Post by: IvanIvanovich on Mon, 20 April 2015, 10:25:29
Post by: awhitedev on Wed, 22 April 2015, 06:15:05
I'll be looking into the articles posted in the making stuff subforum but if anyone here had any insight that'd be helpful too :)
Post by: SpAmRaY on Wed, 22 April 2015, 08:12:01
Thanks Ivan! Will send postage next time I'm on my PC.Paid on 4/10, when will these wires ship?
Post by: IvanIvanovich on Wed, 22 April 2015, 10:40:09
Post by: user 18 on Wed, 22 April 2015, 15:02:47
Post by: swill on Fri, 24 April 2015, 19:30:24
According to my data, I owe straight type wires for 6.25 platemount to:I just saw this. You can disregard the pm I just sent you. I will get this sorted tonight. Thx.
jameslr
christkind
DanielT
Vitaly
eyesmiles
JotaCe
maxmalkav
Nuum
panrc
swill
CPTBadAss
TBone
chzel
admiralvorian
Clicker
JaccoW
promptcurry
strict
Grendel
nathairtras
quochung1989
watterrbottle
ninjadoc
LechnerDE
spamray
echo0
geniekid
GSimon
HoffmanMyster
bunnylake
If you want the wires, please send $1 for USA address, or $3 for international address to my paypal email to cover the shipping and cost of mailer. Please make sure you enter your username in the payment note. If you don't have a record of your invoice/paypal to locate the correct payment email, you can ask me in a PM.
THANKS
Post by: thelectronicnub on Fri, 24 April 2015, 19:51:43
I still have many MX black PCB left... please take them out of my life. $23 shipped USA, or will work out discount for multiple.
Ivan, do you still have PCBs left? Interested in one if so
EDIT: Got mine today, thanks Ivan
Post by: IvanIvanovich on Sat, 25 April 2015, 16:26:05
Post by: Lubed Up Slug on Fri, 15 May 2015, 22:24:42
yes, still have many PCB left. Please send me PM with your paypal email and shipping address I will send you an invoice.
Do you still have any of the PCBs left? And to be clear they come with all of those switches only for $23 or do you have to pay for the switches?
Post by: FreeCopy on Fri, 15 May 2015, 23:50:33
yes, still have many PCB left. Please send me PM with your paypal email and shipping address I will send you an invoice.
Do you still have any of the PCBs left? And to be clear they come with all of those switches only for $23 or do you have to pay for the switches?
Those PCBs come with the MX Black switches.
Post by: IvanIvanovich on Sat, 16 May 2015, 00:32:41
Post by: IvanIvanovich on Thu, 21 May 2015, 14:08:50
7 qty MX blacks PCBS
10 qty plate mount 6.25
7 qty PCB mount 6.25
35 qty plate mount 7x
I also have a heap of 6.25 stab wires for PCB mount... these will be free + postage for anyone who wants them, I can probably give you as many as you could want.
Post by: quochung1989 on Sat, 23 May 2015, 06:00:34
Post by: infiniti on Sat, 23 May 2015, 09:46:36
Still have available:
7 qty MX blacks PCBS
10 qty plate mount 6.25
7 qty PCB mount 6.25
35 qty plate mount 7x
I also have a heap of 6.25 stab wires for PCB mount... these will be free + postage for anyone who wants them, I can probably give you as many as you could want.
Are the PCB mount stabs the screw type ones?
Post by: IvanIvanovich on Sat, 23 May 2015, 11:59:46
Post by: infiniti on Sat, 23 May 2015, 12:27:38
Yes, bolt type. I think only 6 left now. I need to count again and update.
I call dibs on at least five (5) then. I can take more and clear out the stocks too.
Post by: IvanIvanovich on Sat, 23 May 2015, 12:29:47
Post by: infiniti on Sat, 23 May 2015, 12:41:18
OK send me PM with your paypal so I can send you invoice.
PMd :thumb:
Post by: wlhlm on Sat, 18 July 2015, 15:47:30
Cheers! :thumb: