geekhack
geekhack Projects => Making Stuff Together! => Topic started by: Greatfirewall on Sat, 19 July 2014, 08:50:45
-
It is made for GH60 rev.b，but not only for it
还是说中文吧，这个是用pcb做的60%通用定位版，支持除了ios之外基本上所有的键位排列
我们把电路直接设计在了上面，使用了0805的贴片电阻（330Ω）和1206的贴片led，可以选择你喜欢的颜色排列方式，支持自定义
整个线路可以连接到键盘上面，通过键盘控制亮灭
(http://fmn.rrfmn.com/fmn058/20140708/1445/original_5xPV_182d00008db61190.jpg)
(http://fmn.rrimg.com/fmn062/20140719/2155/original_MGKc_4b6c00002faf118c.jpg)
(http://fmn.rrfmn.com/fmn061/20140719/2155/original_58gO_4b9c00002f71118c.jpg)
(http://fmn.xnpic.com/fmn056/20140719/2155/original_Qci9_11010000367a1260.jpg)
(http://fmn.rrfmn.com/fmn060/20140719/2155/original_QdO3_351f00002fa41191.jpg)
-
Broken.
-
repaired
-
repaired
Still broken for me.
-
可能因为图片上传到中国的网站
-
可能因为图片上传到中国的网站
Try imgur.com if it's not blocked in China. I could upload them for you as well, but not without your permission.
-
好的，我试试
-
我在美国，可以看见。很好！
-
This looks interesting... Not too sure if I am keen on having 2 wires coming out of my board.
-
Well, now that's a novel concept. A switch plate made from a PCB, with surface mount LEDs on it! Nice. :)
-
Looks interesting...
If the GH60 had a daughter-board connector it could be done without the extra cable!
-
Could also be pretty sweet for original Poker owners...add a plate and backlighting at the same time.
-
What a novel idea for backlighting! I love it!
I hope it's not too expensive: it looks awesome.
-
That is amazing. Awesome idea.
-
First few images are broken for me but the bottom ones are fine.
Looking very very nice :D
-
If you can't eliminate light-bleed, embrace it ...
-
Still broken for me :(
-
:eek: What a great idea! :eek:
-
-using a PCB as plate means a weak plate. Most people like strong plates. Considering how fussy many geekhackers are with their acrylic and metal casings, I think a 'plate' that is less than 100% rigid will be unpopular. Author should pay attention to the strength of his plate/ pcb.
Most of the earlier pictures are still broken. I am outside China.
-
-using a PCB as plate means a weak plate. Most people like strong plates. Considering how fussy many geekhackers are with their acrylic and metal casings, I think a 'plate' that is less than 100% rigid will be unpopular. Author should pay attention to the strength of his plate/ pcb.
Most of the earlier pictures are still broken. I am outside China.
There's no reason you couldn't make an acrylic plate to go above it or to usr PCB mount switches with it.
-
-using a PCB as plate means a weak plate. Most people like strong plates. Considering how fussy many geekhackers are with their acrylic and metal casings, I think a 'plate' that is less than 100% rigid will be unpopular. Author should pay attention to the strength of his plate/ pcb.
Most of the earlier pictures are still broken. I am outside China.
There's no reason you couldn't make an acrylic plate to go above it or to usr PCB mount switches with it.
You're right. I think users should be aware that the PCB-plate thing works best if combined with a transparent acrylic plate.
Author of OP really has hit on an excellent innovation. This PCB 'mounting' of leds works great to diffuse light. I find that way too many people have a glaringly lighted up LED keyboard. This is much more subtle and less intrusive.
-
Yes, if you use this type of plate, you definitely should use PCB mount switches with a PCB that supports them. :)
-
Would we be able to hack on some sort of passthrough on this plate/pcb so that you would only need one cable for this board?
-
:thumb:
-
Something to note: This means that we can have 2 LED colours on keys at the same time :eek:
magenta on blue miami anyone?
-
This would have been so much better with RGB Smd leds with a controller.
-
This would have been so much better with RGB Smd leds with a controller.
I don't know if a controller would be able to fit on a plate considering that it would be sandwiched between another PCB and the switches....
However, that would be super cool if we could have customizable colours and LED lighting modes!
-
note that a PCB is much stiffer than most plastics used as plate material. I think this pcb as a plate over PCB mount switches would be plenty tough enough, but it also depends on how well they are connected together at the sides.
-
A plate in a Poker or GH60 is not a structural part, so its toughness is no big concern. Fibreglass is quite strong. You could use much flimsier materials and it would not do any difference.
-
-using a PCB as plate means a weak plate. Most people like strong plates. Considering how fussy many geekhackers are with their acrylic and metal casings, I think a 'plate' that is less than 100% rigid will be unpopular. Author should pay attention to the strength of his plate/ pcb.
Most of the earlier pictures are still broken. I am outside China.
PCB很韧性，很有弹性，手感奇妙，算是一种尝试吧
其实定位版（Plate）在60%键盘上大多是用来防止MX轴歪掉，其实和钢质相比真的差别不大
至少我是这样认为的
:)
-
I think this is a great idea.