Post by: BunnyLake on Mon, 11 August 2014, 10:08:34
info and order here
https://ctrlalt.io/store/items/ctrl-alt-60
PCB Only - $50
Comes with limited edition PCB only. The controller will be preinstalled and tested.
PCB + Housing - $250
Comes with limited edition PCB and silver anodized housing by GON. It features purple feet and bolts and a polycarbonate middle layer. It also includes our logo engraved on the bottom of the housing.
Custom Built [CTRL]ALT 60 by Margos Mods - $400
Built to order with your choice of switches, and LEDs.
This keyboard supports SMD LEDs on the bottom of the PCB to make the polycarbonate layer glow. You can also have LEDs in each individual switch.Please let us know how you would like it setup or if you have any questions.
Switches to choose from:
Blacks (Linear)
Clears (Tactile)
Greys (Tactile)
Blues (Clicky)
Browns (Tactile)
Others upon request - please pm
If you would like any additional requests, such as lube or switch stickers, please contact us
You can leave a note during checkout or open up a support ticket with your switch type and/or anything else.
Post by: YongJK on Mon, 11 August 2014, 10:38:17
Post by: jameslr on Mon, 11 August 2014, 10:45:30
Post by: BunnyLake on Mon, 11 August 2014, 10:46:14
Very nice! Does it also come with the caps? :D
no, but im in a good mood, so anyone who orders one of these will get a discount on our next hyperfuse run
Post by: minho on Mon, 11 August 2014, 10:48:30
Very nice! Does it also come with the caps? :D
no, but im in a good mood, so anyone who orders one of these will get a discount on our next hyperfuse run
Okay I was just about to not order this because Duck Viper and now I am damn close to ordering this. Bunny you da man.
Post by: LechnerDE on Mon, 11 August 2014, 11:23:33
Hopefully there will be CTRL ALT TKL boards in the future :D
Post by: BunnyLake on Mon, 11 August 2014, 11:27:18
Thanks to the neverending GH60 GB I have too many 60% PCBs n the pipeline...
Hopefully there will be CTRL ALT TKL boards in the future :D
there will indeed be one, its next on the block after this
Post by: LechnerDE on Mon, 11 August 2014, 11:30:22
Thanks to the neverending GH60 GB I have too many 60% PCBs n the pipeline...
Hopefully there will be CTRL ALT TKL boards in the future :D
there will indeed be one, its next on the block after this
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:
Post by: bueller on Mon, 11 August 2014, 11:32:18
Thanks to the neverending GH60 GB I have too many 60% PCBs n the pipeline...
Hopefully there will be CTRL ALT TKL boards in the future :D
there will indeed be one, its next on the block after this
Sweet. I'm not a fan of the teensy on the Phantom due to it making case selection a pain, looking forward to seeing what you come out with.
Post by: danielucf on Mon, 11 August 2014, 11:35:09
PS: Also consider something 75% next, severe lack of options at the moment and something like the MX Mini with several material types would be great.
Post by: BunnyLake on Mon, 11 August 2014, 11:38:33
Any room inside this thing for a thin brass plate to make it heavier? I loved my GON 60% which this looks similar to, but thought it needed more weight to it personally. I'll at least be picking up a PCB or two at a minimum.
PS: Also consider something 75% next, severe lack of options at the moment and something like the MX Mini with several material types would be great.
im looking in to that, ive had a few requests already today, i also just saw your ticket on the store sir, im just waiting for raccoon to get home then ill have that sorted for you
as for the brass plate, we will be adding a numbered small brass plate to the inside of the case, i believe there is some clearance, but i couldnt comment accurately on what you could get in there
Post by: admiralvorian on Mon, 11 August 2014, 11:41:15
gonna be on the TLK like **** on velcro, though!
Post by: danielucf on Mon, 11 August 2014, 11:45:51
im looking in to that, ive had a few requests already today, i also just saw your ticket on the store sir, im just waiting for raccoon to get home then ill have that sorted for you
as for the brass plate, we will be adding a numbered small brass plate to the inside of the case, i believe there is some clearance, but i couldnt comment accurately on what you could get in there
Sounds great on all fronts. Can never have too much 60% right? :p
Post by: mashby on Mon, 11 August 2014, 11:56:32
Post by: BunnyLake on Mon, 11 August 2014, 11:58:38
Do only the assembled kits get the brass plate/numbered thingie?
no, it will come with the cases
we havent nailed down the implementation yet, but this is also going to happen with the custom jd40 builds so we will have some time to experiment with what will be best
Post by: Xenderwind on Mon, 11 August 2014, 12:05:07
Post by: BunnyLake on Mon, 11 August 2014, 12:07:44
@Bunny you may want to consider putting info on whether or not the assembly includes stabs for clarity purposes.
it includes everything
switches
stabs
leds
all components etc
lube
basically whatever you want, as long as we can get it
if people want to provide there own switches, they can contact me and we will discount those off the price
Post by: BunnyLake on Mon, 11 August 2014, 12:10:27
Post by: Xenderwind on Mon, 11 August 2014, 12:16:36
I figured it did, I just wanted to help. I assumed someone would ask down the line if its not listed (someone will still probably ask even if it is though). It lets people know what they have to source themselves to get a fully functional board (especially with the stabs GB closing soon). And GH's past history with stabs haven't been the most successful...@Bunny you may want to consider putting info on whether or not the assembly includes stabs for clarity purposes.
it includes everything
switches
stabs
leds
all components etc
lube
basically whatever you want, as long as we can get it
if people want to provide there own switches, they can contact me and we will discount those off the price
Post by: Puddsy on Mon, 11 August 2014, 12:27:12
Post by: jonathanyu on Mon, 11 August 2014, 12:33:24
Post by: codyeatworld on Mon, 11 August 2014, 12:34:48
may I ask that what pcb is that?
A limited edition NerD 60 by GON.
Post by: CPTBadAss on Mon, 11 August 2014, 12:36:06
Post by: BunnyLake on Mon, 11 August 2014, 12:36:33
Does anyone at CTRL ALT already have a test board that they can share pictures of?
sadly we dont currently
Post by: jonathanyu on Mon, 11 August 2014, 12:42:36
:thumb: cool, going to order thismay I ask that what pcb is that?
A limited edition NerD 60 by GON.
Post by: Latin00032 on Mon, 11 August 2014, 12:45:45
Is the next hyper fuse run going to be sp dsa or gmk?Very nice! Does it also come with the caps? :D
no, but im in a good mood, so anyone who orders one of these will get a discount on our next hyperfuse run
Post by: kenmai9 on Mon, 11 August 2014, 12:46:50
Is the next hyper fuse run going to be sp dsa or gmk?Very nice! Does it also come with the caps? :D
no, but im in a good mood, so anyone who orders one of these will get a discount on our next hyperfuse run
if (gmk) {
me.splooge();
}
Post by: BunnyLake on Mon, 11 August 2014, 12:47:24
Post by: Latin00032 on Mon, 11 August 2014, 12:50:54
both, we will be doing dsa through sp as a mini buy, and a gmk hyperfuse run to replace dcsKenmai splooged.
I just edged.
Post by: jameslr on Mon, 11 August 2014, 13:55:23
Post by: Motan22 on Mon, 11 August 2014, 14:54:40
Post by: asdfjkl36 on Mon, 11 August 2014, 15:24:23
Standard red? Or seeing how this would probably be more than 50 PCBs, are you getting them made in black? (Seeing how there is a IC for black NerD 60% pcb)
Post by: jdcarpe on Mon, 11 August 2014, 15:26:07
What color would the pcb be?
Standard red? Or seeing how this would probably be more than 50 PCBs, are you getting them made in black? (Seeing how there is a IC for black NerD 60% pcb)
Purple, actually. :)
Post by: BunnyLake on Mon, 11 August 2014, 15:56:24
What color would the pcb be?
Standard red? Or seeing how this would probably be more than 50 PCBs, are you getting them made in black? (Seeing how there is a IC for black NerD 60% pcb)
the first run is a bit different that we hinted, this pcb is gonna be black with with ctrl alt in white
Post by: asdfjkl36 on Mon, 11 August 2014, 15:59:39
What color would the pcb be?
Standard red? Or seeing how this would probably be more than 50 PCBs, are you getting them made in black? (Seeing how there is a IC for black NerD 60% pcb)
the first run is a bit different that we hinted, this pcb is gonna be black with with ctrl alt in white
Sweet. I think i'll be joining this then :thumb:
Post by: Sent on Mon, 11 August 2014, 18:41:24
Post by: AKmalamute on Mon, 11 August 2014, 19:52:33
Post by: BunnyLake on Mon, 11 August 2014, 19:57:52
I'm guessing the prices are before shipping? I'm mostly asking about the JD40 (PCB/plate only, actually) but of course shipping has to go into the whole picture, and I'm trying to save up for non-kbd buys as well as the Matias 60% whenever it comes out...
international shipping is $20, express with tracking
Post by: Vintage on Mon, 11 August 2014, 20:30:33
Post by: oneproduct on Mon, 11 August 2014, 21:03:28
@Bunny you may want to consider putting info on whether or not the assembly includes stabs for clarity purposes.
it includes everything
switches
stabs
leds
all components etc
lube
basically whatever you want, as long as we can get it
if people want to provide there own switches, they can contact me and we will discount those off the price
How about springs? Also, if springs are an option, would it be possible to have a mix of different springs? (similar idea to realforce variable)
Post by: domoaligato on Mon, 11 August 2014, 21:08:31
Post by: Sent on Mon, 11 August 2014, 22:00:36
when does this groupbuy end?
From what I understand from talking to Bunny, they have a limited number so it's just whenever they sell out. I believe.
Post by: taylordcraig on Mon, 11 August 2014, 22:23:27
Any room inside this thing for a thin brass plate to make it heavier? I loved my GON 60% which this looks similar to, but thought it needed more weight to it personally. I'll at least be picking up a PCB or two at a minimum.
PS: Also consider something 75% next, severe lack of options at the moment and something like the MX Mini with several material types would be great.
I am also on the market for a mx mini and avoiding a gon. Hook us up something a little more special. <3
edit: for clarity, this is very special. I want a special 75%.
Post by: slapstick on Mon, 11 August 2014, 23:58:39
Post by: domoaligato on Tue, 12 August 2014, 00:10:51
so what would you use it for?
Post by: Toxic-i- on Tue, 12 August 2014, 00:28:31
Post by: slapstick on Tue, 12 August 2014, 04:35:16
the case only fits the nerd60.
so what would you use it for?
I have a spare nerd60. No need to purchase another if I have one laying around y'know :thumb:
Post by: BunnyLake on Tue, 12 August 2014, 05:46:20
when does this groupbuy end?
we have a very limited number of these was want to make, so when they are gone they are gone, they wont last all that long
Post by: BunnyLake on Tue, 12 August 2014, 05:50:44
Is it possible to purchase a case without the PCB? And if so, would it include the brass plates ect.
you can have a case without the pcb if you want sir
Post by: shawn24 on Tue, 12 August 2014, 07:16:29
does it include the case surrounding led?I figured it did, I just wanted to help. I assumed someone would ask down the line if its not listed (someone will still probably ask even if it is though). It lets people know what they have to source themselves to get a fully functional board (especially with the stabs GB closing soon). And GH's past history with stabs haven't been the most successful...@Bunny you may want to consider putting info on whether or not the assembly includes stabs for clarity purposes.
it includes everything
switches
stabs
leds
all components etc
lube
basically whatever you want, as long as we can get it
if people want to provide there own switches, they can contact me and we will discount those off the price
Post by: BunnyLake on Tue, 12 August 2014, 07:17:28
does it include the case surrounding led?I figured it did, I just wanted to help. I assumed someone would ask down the line if its not listed (someone will still probably ask even if it is though). It lets people know what they have to source themselves to get a fully functional board (especially with the stabs GB closing soon). And GH's past history with stabs haven't been the most successful...@Bunny you may want to consider putting info on whether or not the assembly includes stabs for clarity purposes.
it includes everything
switches
stabs
leds
all components etc
lube
basically whatever you want, as long as we can get it
if people want to provide there own switches, they can contact me and we will discount those off the price
yeah, completely built however you want it
Post by: Chemisery on Tue, 12 August 2014, 11:46:28
Very nice! Does it also come with the caps? :D
no, but im in a good mood, so anyone who orders one of these will get a discount on our next hyperfuse run
I hope that includes those who only bought the PCB! :-X
Post by: asdfjkl36 on Tue, 12 August 2014, 13:00:42
Anyone know where i can get the rest of the stuff? resistors/leds and whatnot for this since GON shipping is still $26 for me for the small parts >.>
Post by: BunnyLake on Tue, 12 August 2014, 13:02:33
Ordered.
Anyone know where i can get the rest of the stuff? resistors/leds and whatnot for this since GON shipping is still $26 for me for the small parts >.>
we will have everything available from the store in the next few days, and we can combine shipping with your order
Post by: oneproduct on Tue, 12 August 2014, 20:33:42
Can we choose custom springs? And, if so, would it be possible to have several different spring types so that it's similar to a Realforce variable? (a few lighter springs for the pinkies mostly)
Post by: BunnyLake on Wed, 13 August 2014, 05:39:06
Asking again since it seemed to get lost in the rest of the posts. :)
Can we choose custom springs? And, if so, would it be possible to have several different spring types so that it's similar to a Realforce variable? (a few lighter springs for the pinkies mostly)
a long as we can get our hands on them, then yes
Post by: zennasyndroxx on Wed, 13 August 2014, 05:40:35
Post by: BunnyLake on Wed, 13 August 2014, 05:43:43
any mockup or images for the PCB? :D
there is one in the OP sir
Post by: zennasyndroxx on Wed, 13 August 2014, 05:50:36
any mockup or images for the PCB? :D
there is one in the OP sir
the one in the OP looks like a sneak peek.
what color and thickness will the PCB be?
also, will this be a long term product from ctrlalt or will this be a temporary groupbuy?
Post by: BunnyLake on Wed, 13 August 2014, 06:01:29
any mockup or images for the PCB? :D
there is one in the OP sir
the one in the OP looks like a sneak peek.
what color and thickness will the PCB be?
also, will this be a long term product from ctrlalt or will this be a temporary groupbuy?
that is a screenshot of the gerber, the silkscreen is literally that size, pcb is black, silkscreen is white, aside form that, its the same specs as a nerd 60 if you wanna look at the technical specs of that, its a lovely pcb
as for timing, we will get a few extras but really its just limited edition, we wont be doing another run of them
Post by: jorgenslee on Wed, 13 August 2014, 08:02:14
international shipping is $20, express with tracking
Are you gonna use a shipment company or royal mail? I asked because Im trying to avoid DHL, FEDEX as they charge import fees upon delivery of the item here.
Also, is it possible to get PCB and plate?
Post by: mashby on Wed, 13 August 2014, 08:13:25
Also, is it possible to get PCB and plate?
The top of the case is the plate and I doubt you could buy just the top of the case.
However, you could buy just the PCB and then source a 60% plate separately. IMSTO has had a couple of rounds and GON sells them as well.
Post by: jorgenslee on Wed, 13 August 2014, 08:21:49
The top of the case is the plate and I doubt you could buy just the top of the case.I see, I thought the plate is separate.
However, you could buy just the PCB and then source a 60% plate separately. IMSTO has had a couple of rounds and GON sells them as well.
Yeah that could be an option. The shipping fee is a bummer though. :'(
Post by: bdtbinh on Thu, 14 August 2014, 00:50:34
Im planning to get this keyboard at the time i have a hyperfuse r2 set ;D
Post by: Oobly on Thu, 14 August 2014, 04:25:57
Very nice 60% boards. Ordered a couple of PCBs.
Post by: taylordcraig on Thu, 14 August 2014, 14:57:28
@Bunny: when will hyperfuse r2 start? and who will ship the package, u or SP?
Im planning to get this keyboard at the time i have a hyperfuse r2 set ;D
hyper R2 is gmk as far as I know.
so bunny will arrange the distribution.
likely himself, raccoon, and/or cody.
Post by: nathairtras on Thu, 14 August 2014, 15:32:28
Post by: BunnyLake on Thu, 14 August 2014, 15:47:36
Is this board compatible with Poker/Pure/etc cases? Really want the split right shift, but wanting to house it in a metal case.
this case is metal sir
but the answer is yes, it is compatible
Post by: nathairtras on Thu, 14 August 2014, 16:19:45
Post by: codyeatworld on Thu, 14 August 2014, 16:21:45
It says the controller is pre-installed. If I were to buy the PCB, what additional would be necessary? Just the switches, or does it need additional components soldered on like the USB connector or any smd parts? (Not including LEDs, I wouldn't want any anyway. :P )
You would need diodes as well as switches.
If you did want leds, you would also need resistors, but other than that the PCB is good to go. :D
Post by: Glod on Fri, 15 August 2014, 17:32:04
Post by: BunnyLake on Fri, 15 August 2014, 17:37:54
if this is a version of the Nerd60 then i highly suggest this pcb.
it certainly is
Post by: swornxin on Sat, 16 August 2014, 00:16:00
Very much looking forward to this. Just got a new 60% so I'm not entirely in the need of this but I would be in for at least one TKL.Thanks to the neverending GH60 GB I have too many 60% PCBs n the pipeline...
Hopefully there will be CTRL ALT TKL boards in the future :D
there will indeed be one, its next on the block after this
Post by: Reckthor on Mon, 18 August 2014, 05:53:28
Post by: BunnyLake on Mon, 18 August 2014, 06:07:46
When will this GB be ending?
as answered above, we have a fixed number we want to do, we are getting close
Post by: luckynet on Mon, 18 August 2014, 06:59:45
Post by: rippor on Mon, 18 August 2014, 14:36:27
can i just order they keycaps kind sir??
those are from the hyperfuse GB so no. Might be able to find some on the classfieds
Post by: BunnyLake on Mon, 18 August 2014, 14:38:42
can i just order they keycaps kind sir??
those are from the hyperfuse GB so no. Might be able to find some on the classfieds
round 2 soon
Post by: luckynet on Mon, 18 August 2014, 21:31:26
can i just order they keycaps kind sir??
those are from the hyperfuse GB so no. Might be able to find some on the classfieds
round 2 soon
sweet mother of keycaps!! can you guys do it PBT, and in SA profile? hehehe ok will stop harassing people and wait for it (which will probably be in 10 more months but ohweelllll)
Post by: TLSC.wipeOut on Mon, 18 August 2014, 21:37:51
can i just order they keycaps kind sir??
those are from the hyperfuse GB so no. Might be able to find some on the classfieds
round 2 soon
HyperFuse R2 Soon~!?!?! =O so will it actually be GMK this time around?
Post by: riotonthebay on Mon, 18 August 2014, 21:48:05
can i just order they keycaps kind sir??
those are from the hyperfuse GB so no. Might be able to find some on the classfieds
round 2 soon
HyperFuse R2 Soon~!?!?! =O so will it actually be GMK this time around?
Hyper Fuse is [Ctrl]Alt's first planned GMK buy. See here. (http://geekhack.org/index.php?topic=61379.msg1424411#msg1424411)
Post by: henz on Thu, 21 August 2014, 05:52:06
Post by: BunnyLake on Thu, 21 August 2014, 06:46:43
does the pcb+housing come with a mx plate?
the plate is built in to the case and is universal so it covers many layouts
Post by: henz on Thu, 21 August 2014, 06:49:11
does the pcb+housing come with a mx plate?
the plate is built in to the case and is universal so it covers many layouts
which means iso also i guess, argggh, might have to order :)
Post by: BunnyLake on Thu, 21 August 2014, 07:05:37
does the pcb+housing come with a mx plate?
the plate is built in to the case and is universal so it covers many layouts
which means iso also i guess, argggh, might have to order :)
yeah, it does indeed support iso good sir
Post by: Oobly on Thu, 21 August 2014, 07:44:46
does the pcb+housing come with a mx plate?
the plate is built in to the case and is universal so it covers many layouts
which means iso also i guess, argggh, might have to order :)
Come on, do it. You know you want to :) It's a great price for GON!
Post by: henz on Thu, 21 August 2014, 15:53:25
Post by: BunnyLake on Thu, 21 August 2014, 15:55:04
ok, im going to empty my wallet :D im just wondering if its possible to get switches also from you guys? So i dont have to order from another place and pay alot of money in shipping costs to sweden again :)
of course, just list your switch type and you paypal in the notes and ill invoice you separately, itll be 50 cents a switch as i have to pay VAT to get them in to the UK, but i have tons and tons on hand now so can accommodate whatever you want
Post by: henz on Thu, 21 August 2014, 16:14:05
Post by: Gloomy Moonie on Sat, 23 August 2014, 11:54:59
how does this board compare to the GH60 with a teensy? As far as I can tell from the description (http://www.gonskeyboardworks.com/pcbs/95-nerd-60-by-gon.html#/7_optional_soldering-no_i_will_do_it_myself_) it does support keymaps, but to what extent? And what about layers?
Is the PCB interchangeable with a poker/GH60 case, and vise versa (GH60 PCB with the [CTRL]ALT 60 case)?
Does it come presoldered? If not, are the electronics included (diodes, LED's, etc.)?
What's the price for the kit without the switches?
And finally, is the 20$ int'l shipping price regardless of where you order to?
One of the best looking 60% I've seen yet for sure, very interested. How many are left, so I could know how much time I have left to decide?
Thanks!
Post by: BunnyLake on Sat, 23 August 2014, 12:07:38
Hey guys, noob with a few questions here:
how does this board compare to the GH60 with a teensy? As far as I can tell from the description (http://www.gonskeyboardworks.com/pcbs/95-nerd-60-by-gon.html#/7_optional_soldering-no_i_will_do_it_myself_) it does support keymaps, but to what extent? And what about layers?
Is the PCB interchangeable with a poker/GH60 case, and vise versa (GH60 PCB with the [CTRL]ALT 60 case)?
Does it come presoldered? If not, are the electronics included (diodes, LED's, etc.)?
What's the price for the kit without the switches?
And finally, is the 20$ int'l shipping price regardless of where you order to?
One of the best looking 60% I've seen yet for sure, very interested. How many are left, so I could know how much time I have left to decide?
Thanks!
the board is fully programmable
the pcb itself will fit in other 60% cases and has the same foot print as a poker
it comes with the controller presoldered and tested
if you order a complete build, it will come built and tuned, with leds etc of your choosing
the pcb on its own or pcb with case does not
we can do any soldering needed for a small additional fee though
the shipping price is fixed no matter where you are, unless you are in the UK, in which case we can discount it slightly
there are still some left, i dont know how long they will last, some days we get no orders, some days we get 5
Post by: codyeatworld on Sat, 23 August 2014, 12:11:45
Hey guys, noob with a few questions here:
how does this board compare to the GH60 with a teensy? As far as I can tell from the description (http://www.gonskeyboardworks.com/pcbs/95-nerd-60-by-gon.html#/7_optional_soldering-no_i_will_do_it_myself_) it does support keymaps, but to what extent? And what about layers?
Is the PCB interchangeable with a poker/GH60 case, and vise versa (GH60 PCB with the [CTRL]ALT 60 case)?
Does it come presoldered? If not, are the electronics included (diodes, LED's, etc.)?
What's the price for the kit without the switches?
And finally, is the 20$ int'l shipping price regardless of where you order to?
One of the best looking 60% I've seen yet for sure, very interested. How many are left, so I could know how much time I have left to decide?
Thanks!
Hello there!
I have a GH60, and I have not used a board with a teensy so I can't compare it with that.
But I like this pcb more than the gh60 because it supports full leds, has special smd leds on the bottom of the pcb specifically for this housings like this. (its how the housing glows in the middle).
It has excellent key mapping software that works out of box on windows. There are 2 fully customizable fn layers. There is also macro support.
The ctrlalt PCB should fit in most (if not all) poker/gh60 housings. The gh60 pcb would not fit in this case because of the tight usb connector placement.
The controller is presoldered and tested. You would need diodes, switches, resistors, and leds.
And yes $20 anywhere.
Less than half remain :D
If you have any more questions let me know!
Post by: jorgenslee on Sat, 23 August 2014, 16:06:55
Can I add LEDs, diodes and resistor to an order? How much each?
The ctrlalt PCB should fit in most (if not all) poker/gh60 housings.Will it fit on Hammer case?
Post by: domoaligato on Sat, 23 August 2014, 18:32:53
Will it fit on Hammer case?
yes
Post by: Latin00032 on Sun, 24 August 2014, 23:35:23
It would involve the plate not having the 1.5 mods on each lower corner along with the split backspace and split right shift.
Post by: codyeatworld on Mon, 25 August 2014, 00:04:31
Is one of the options to have a hhkb layout?
It would involve the plate not having the 1.5 mods on each lower corner along with the split backspace and split right shift.
This housing supports everything (iso, split shifts/backspace/1.5/7 or 1.25/6.25).
I'll find out if I can make happy layout an option.
Post by: Sent on Mon, 25 August 2014, 03:04:05
I'll find out if I can make happy layout an option.
!!!!!!!
Interested as well.
Post by: Latin00032 on Mon, 25 August 2014, 06:43:09
Thanks.Is one of the options to have a hhkb layout?
It would involve the plate not having the 1.5 mods on each lower corner along with the split backspace and split right shift.
This housing supports everything (iso, split shifts/backspace/1.5/7 or 1.25/6.25).
I'll find out if I can make happy layout an option.
Post by: Latin00032 on Wed, 27 August 2014, 11:39:57
Post by: Gloomy Moonie on Thu, 28 August 2014, 07:42:38
Another question though - when I get the just the PCB + case ($250) option I assume I'd have to outsource stabs myself, if so, which ones would I need?
Post by: Glod on Thu, 28 August 2014, 10:32:53
Post by: BunnyLake on Thu, 28 August 2014, 10:38:44
Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.
we have stabs sat here ready, i just need to take some pics and get them populated on the store
Post by: Glod on Thu, 28 August 2014, 10:39:44
Post by: Gloomy Moonie on Thu, 28 August 2014, 10:40:33
Post by: Gloomy Moonie on Thu, 28 August 2014, 10:42:19
Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.
Pcb mount cherry stabs, a recent stab group buy ended but some components websites sell the 2x for cheap but the spacebar wire will need to be made or acquired.
we have stabs sat here ready, i just need to take some pics and get them populated on the store
Thanks.
Post by: Gloomy Moonie on Thu, 28 August 2014, 11:11:40
Dude, where's your ErgoDox!Went over some of your posts, congrats on that awesome lookin' Nerd60 HHKB!
The "cool" factor is definitely tempting, and I'm in a huge dilemma on whether to get one or not, and if so which one (Duck Eagle vs. Nerd60), but I know that if I would, my ErgoDox, wouldn't stand a chance, and it isn't even fully assembled yet.
"A man with a watch knows what time it is. A man with two watches is never sure", as they say.
Post by: Glod on Fri, 29 August 2014, 16:19:28
Post by: Gloomy Moonie on Fri, 29 August 2014, 17:06:23
Post by: shimmy1996 on Tue, 02 September 2014, 07:36:03
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?
Post by: BunnyLake on Tue, 02 September 2014, 07:40:23
Great buy, Bunny!XDD
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?
the top plate is universal, so covers a ton of layouts
we are looking in to the possibility of the hhkb option now, if that happens, any previous orders will be able to adjust there order to account for this
Post by: shimmy1996 on Tue, 02 September 2014, 07:45:59
Great buy, Bunny!XDD
Would it be possible for it to come with multiple choices of top plates?
i.e. top plate for HHKB layout ?
the top plate is universal, so covers a ton of layouts
we are looking in to the possibility of the hhkb option now, if that happens, any previous orders will be able to adjust there order to account for this
Thanks!
Already joined XDD
Post by: kitsun8 on Thu, 04 September 2014, 08:02:46
Post by: BunnyLake on Thu, 04 September 2014, 08:03:45
Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... :-\
no its doesnt come with diodes, but does come with a presoldered and tested controller
Post by: jorgenslee on Thu, 04 September 2014, 08:06:33
Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... :-\
no its doesnt come with diodes, but does come with a presoldered and tested controller
What kind of diodes are needed for this? Also, I pmed about a change of order regarding the [CTRL] ALT 60 PCB. Hope you get it.
Post by: kitsun8 on Thu, 04 September 2014, 10:39:27
Can i get them soldered on? I can pay more, its just that I want the black NerD PCB.Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... :-\
no its doesnt come with diodes, but does come with a presoldered and tested controller
Post by: kitsun8 on Thu, 04 September 2014, 10:42:04
I believe DIP diodes are used. Gon sells them on his website.Does this PCB by itself come with diodes soldered? I really want to see a picture of the PCB before I join... :-\
no its doesnt come with diodes, but does come with a presoldered and tested controller
What kind of diodes are needed for this? Also, I pmed about a change of order regarding the [CTRL] ALT 60 PCB. Hope you get it.
Post by: BunnyLake on Thu, 04 September 2014, 10:43:31
we also have plenty of diodes and they will be on the store in the next update we are pushing
Post by: echo0 on Fri, 05 September 2014, 18:26:46
Post by: codyeatworld on Sun, 07 September 2014, 11:50:35
Is one of the options to have a hhkb layout?
It would involve the plate not having the 1.5 mods on each lower corner along with the split backspace and split right shift.
I'll find out if I can make happy layout an option.
!!!!!!!
Interested as well.
Post by: Sent on Tue, 09 September 2014, 18:10:39
Post by: Glod on Thu, 11 September 2014, 01:13:21
Post by: BunnyLake on Thu, 11 September 2014, 11:03:06
Post by: asdfjkl36 on Thu, 11 September 2014, 23:58:46
quick update guys, im going on holiday in about a week for a week, when i get back we will be making the order
Sweet
Any update on when the parts for these will show up on the site for purchase?
Edit: How rude of me. Have great vacation!
Post by: Sent on Fri, 12 September 2014, 00:02:11
quick update guys, im going on holiday in about a week for a week, when i get back we will be making the order
Have a good vacay, Bunz. :thumb:
Post by: henz on Fri, 26 September 2014, 06:49:14
Post by: BunnyLake on Fri, 26 September 2014, 10:40:03
once they are ordered, they shouldnt take long, i could be wrong but i think i was told 4 - 6 weeks, but cody will know or be able to get an accurate figure for everyone
cody speaks to gon regularly so whilst im away if people wanna message him regarding anything in this buy he will be able to give you the quickest answer
Post by: Reckthor on Tue, 07 October 2014, 12:10:42
Post by: BunnyLake on Tue, 07 October 2014, 12:11:37
Has the order been placed?
we are just tying up some loose ends and then making the order
ill post here as soon as its up
however if anyone was still thinking, you probably have about 12 - 24 hours to get an order in
Post by: BunnyLake on Tue, 07 October 2014, 12:59:01
order just went in with gon
but we will keep selling a few extras to make up numbers
pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings
Post by: Sent on Tue, 07 October 2014, 16:25:40
scratch that above
order just went in with gon
but we will keep selling a few extras to make up numbers
pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings
I actually forgot about this buy already. :))
Post by: henz on Wed, 08 October 2014, 02:06:43
Post by: bueller on Wed, 08 October 2014, 02:48:08
scratch that above
order just went in with gon
but we will keep selling a few extras to make up numbers
pcbs will take much less time than housings, so they will be sent to us separately, apparently we will have them in around 2 weeks so i can full fill pcb only orders whilst we are waiting on housings
Sweet, got everything ready for my next build except the PCB :)
Post by: shimmy1996 on Wed, 08 October 2014, 21:07:53
Should I simply make another order?
Post by: BunnyLake on Thu, 09 October 2014, 08:20:32
Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?
that shouldnt be the case assuming you actually put the order through
if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you
Post by: shimmy1996 on Thu, 09 October 2014, 09:58:35
Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?
that shouldnt be the case assuming you actually put the order through
if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you
I failed to pay for the last order as I got stuck at payment page, so I wrote a ticket regarding the issue and asked whether it is possible to pay through paypal.
I just placed the order again, hope that's ok. XD
Post by: BunnyLake on Thu, 09 October 2014, 10:09:02
Hi Bunny. I found that my order disappeared... and it cannot be found in the order history as well...
Should I simply make another order?
that shouldnt be the case assuming you actually put the order through
if you paid etc you should have an email with an order number, if you could send that to me ill get it sorted right out for you
I failed to pay for the last order as I got stuck at payment page, so I wrote a ticket regarding the issue and asked whether it is possible to pay through paypal.
I just placed the order again, hope that's ok. XD
yeah no problem at all, sorry that ticket was missed sir, we have been doing a big overhaul on the site and it should be a much better experience now
Post by: henz on Thu, 09 October 2014, 15:21:35
Post by: BunnyLake on Thu, 09 October 2014, 15:22:31
Sent you a pm Bunny, didnt get a respone regarding my order. I upgraded my order to custom builds but the order on the site has not yet been updated, will it? Or do you have it written somewhere? ;)
it gets written in the admin notes, which only we can see sadly
Post by: henz on Thu, 09 October 2014, 15:24:43
Post by: BunnyLake on Thu, 16 October 2014, 13:02:13
Post by: digi on Thu, 16 October 2014, 13:12:54
Show Image(http://i.imgur.com/03zr08z.jpg)
looks like a pic from GON's workbench. Sick dude!
Post by: SpAmRaY on Thu, 16 October 2014, 13:13:03
Show Image(http://i.imgur.com/03zr08z.jpg)
I would put that on the wall and use it as decoration.
Post by: Reckthor on Thu, 16 October 2014, 13:14:10
Post by: BunnyLake on Thu, 16 October 2014, 13:16:09
Yes! any word on the cases?
they are gonna be a bit longer, but the pcbs are being shipped to me tomorrow, and as soon as they arrive, ill get the pcb only orders shipped out, and because im more excited about this than anyone, any time i get new pics and updates ill pop them right here
Post by: add1ct3dd on Thu, 16 October 2014, 13:32:41
Post by: radio_killah on Thu, 16 October 2014, 13:33:20
Show Image(http://i.imgur.com/03zr08z.jpg)
Hot damn that is a sexy pcb..
Post by: byker on Thu, 16 October 2014, 13:34:33
Show Image(http://i.imgur.com/03zr08z.jpg)
Is that what all of them look like now? If so I really want to order one! :p :eek:
Post by: henz on Thu, 16 October 2014, 13:37:17
Post by: BunnyLake on Thu, 16 October 2014, 14:25:51
Show Image(http://i.imgur.com/03zr08z.jpg)
Is that what all of them look like now? If so I really want to order one! :p :eek:
yeah that is the final pcb, being shipped tomorrow to me, ive been told in person they are stunning
Post by: BunnyLake on Thu, 16 October 2014, 14:26:45
Just wondered - are we still able to buy - and is the $400 offer pre-soldered? I'd be after the whole thing, but want to solder it myself (something to do :D).
so the 400 option is for a totally custom built, with stickers lube leds etc all to order
if you wanna do it yourself, but have everything provided for you,l if you shoot me a pm with exactly what you want, i can sort a quote for you
Post by: add1ct3dd on Thu, 16 October 2014, 14:29:37
Just wondered - are we still able to buy - and is the $400 offer pre-soldered? I'd be after the whole thing, but want to solder it myself (something to do :D).
so the 400 option is for a totally custom built, with stickers lube leds etc all to order
if you wanna do it yourself, but have everything provided for you,l if you shoot me a pm with exactly what you want, i can sort a quote for you
Nice cheers!
I've sent over an email on the ctrlalt site just incase you were a little busy, but I realise I've missed some stuff off! (disregard the email :D - email is same as my username).
I'll work it all out, and send you a PM later tonight :)
Cheers!
Post by: BunnyLake on Thu, 16 October 2014, 14:49:52
Just wondered - are we still able to buy - and is the $400 offer pre-soldered? I'd be after the whole thing, but want to solder it myself (something to do :D).
so the 400 option is for a totally custom built, with stickers lube leds etc all to order
if you wanna do it yourself, but have everything provided for you,l if you shoot me a pm with exactly what you want, i can sort a quote for you
Nice cheers!
I've sent over an email on the ctrlalt site just incase you were a little busy, but I realise I've missed some stuff off! (disregard the email :D - email is same as my username).
I'll work it all out, and send you a PM later tonight :)
Cheers!
perfect sir
thanks
Post by: byker on Thu, 16 October 2014, 15:04:58
Show Image(http://i.imgur.com/03zr08z.jpg)
Is that what all of them look like now? If so I really want to order one! :p :eek:
yeah that is the final pcb, being shipped tomorrow to me, ive been told in person they are stunning
So tempting!! :confused:
Post by: Sent on Thu, 16 October 2014, 16:10:00
Show Image(http://i.imgur.com/03zr08z.jpg)
I cannot wait for my entire build. Black PCB's are so sexy.
Post by: asdfjkl36 on Thu, 16 October 2014, 17:40:32
Can't wait to get mine ;D
When will we be able to buy the LEDs, diodes and all that jazz from you. Just so my PCB can be shipped with all it needs
Post by: add1ct3dd on Fri, 17 October 2014, 06:25:53
Hoping to get a nice quote this morning, it looks REALLY nice.
Only thing I can't decide on is switch type:- I've got browns and reds so far, and want it for gaming and typing - so that's potentially Blacks as well, or possibly even clear?
Decisions... (any help with switch decision I'd appreciate :P)
Post by: Sent on Fri, 17 October 2014, 06:44:00
Yeah it really does look nice!
Hoping to get a nice quote this morning, it looks REALLY nice.
Only thing I can't decide on is switch type:- I've got browns and reds so far, and want it for gaming and typing - so that's potentially Blacks as well, or possibly even clear?
Decisions... (any help with switch decision I'd appreciate :P)
Modded vintage blacks. Only thing I use. :-X
Post by: MOZ on Fri, 17 October 2014, 07:17:27
Post by: bueller on Fri, 17 October 2014, 07:39:14
Post by: add1ct3dd on Fri, 17 October 2014, 15:37:00
Post by: BunnyLake on Fri, 17 October 2014, 15:40:45
Black switches it is, I've just decided now. I have Reds + browns, time for something different (and plus having the same colour switches as everything else will look inside :D).
great choice sir
i havent forgotten you btw, just getting some numbers together on things
Post by: add1ct3dd on Fri, 17 October 2014, 16:52:24
Black switches it is, I've just decided now. I have Reds + browns, time for something different (and plus having the same colour switches as everything else will look inside :D).
great choice sir
i havent forgotten you btw, just getting some numbers together on things
That's ok, you're a busy man :)
Post by: Glod on Fri, 17 October 2014, 17:06:48
those who get these are getting the absolute best 60%, even better those who got the case too. :)
Post by: 01111000 on Fri, 17 October 2014, 20:36:26
Thanks
Post by: BunnyLake on Sat, 18 October 2014, 03:30:51
Very interested in buying a PCB only (mainly due to monetary constraints), but what cases are compatible with it? Would a normal case that can fit a Poker 2 work?
Thanks
yeah any standard 60% case will work
Post by: asdfjkl36 on Tue, 21 October 2014, 04:09:23
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
Post by: add1ct3dd on Thu, 23 October 2014, 07:48:56
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
Yep, contact one of them for a custom order - I've done the same , essentially everything minus keycaps to build the keyboard :)
On that note - Bunny, did you want the order ID so you can adjust the total cost so I can pay?
Post by: BunnyLake on Thu, 23 October 2014, 08:35:34
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
Yep, contact one of them for a custom order - I've done the same , essentially everything minus keycaps to build the keyboard :)
On that note - Bunny, did you want the order ID so you can adjust the total cost so I can pay?
yeah if you want a cutom quote or to pay via paypal, use the contact form on the top of ctrl alt and send me your order number, any additional info i need, as well as a paypal email
Post by: BunnyLake on Thu, 23 October 2014, 08:35:47
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
yeah these will be up soon
Post by: jorgenslee on Thu, 23 October 2014, 09:30:25
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
yeah these will be up soon
Did the PCBs arrived from GON yet?
Post by: BunnyLake on Thu, 23 October 2014, 09:31:10
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
yeah these will be up soon
Did the PCBs arrived from GON yet?
nope they are on there way to me, should be here either tomorrow or early next week
as soon as they are on hand ill post here, get nice pics up and get them sent out
Post by: BunnyLake on Thu, 23 October 2014, 10:18:10
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
diodes are now on the store, and we will be adding lots more building supplies soon
Post by: asdfjkl36 on Thu, 23 October 2014, 14:59:36
This might have been skipped
Will the diodes, LEDs, ect. Be available on the site to be delivered with our order? And if so, when will Shri show up for purchase.
Thanks.
diodes are now on the store, and we will be adding lots more building supplies soon
Thanks for the update
I'll have to wait a bit to spend some money, so i'll just wait for the other parts to show up in the shop to order. I'll open up a ticket to have my order added to my PCB shipment. ;D
Post by: honoka on Sun, 26 October 2014, 00:23:49
I was thinking of going plateless on this one.
Hugs
Post by: Ripudio on Sun, 26 October 2014, 00:51:38
Post by: Flamingchook on Sun, 26 October 2014, 00:57:42
Hiya, does the PCB have support for PCB-mount stablizers?
I was thinking of going plateless on this one.
Hugs
It's not actually possible to go plateless with this keyboard as it is designed so that the top of the case and the plate are the same piece.
The design is very similar to this one:
(http://www.gonskeyboardworks.com/137-thickbox_default/gon-ns-nerd-tkl-w-tuningassembly.jpg)
Edit: You can get a better idea how it will look with keycaps on by browsing the Post Your GON thread (http://geekhack.org/index.php?topic=47644.0)
Post by: codyeatworld on Sun, 26 October 2014, 01:04:25
The gon ns housing/plate is designed to hug the stabilizer inserts in place.
You can use the pcb without a plate in different type of housing, like a poker case.
Edit: for clarity
Post by: Flamingchook on Sun, 26 October 2014, 07:01:03
This pcb only supports cherry pcb mounted stabs.
The gon ns housing/plate is designed to hug the stabilizer inserts in place.
You can use the pcb without a plate in different type of housing, like a poker case.
Edit: for clarity
Oh right, you can buy just the PCB. Should have thought of that!
Post by: honoka on Sun, 26 October 2014, 07:47:59
What say you Bunny?
Post by: bueller on Sun, 26 October 2014, 07:48:44
Post by: BunnyLake on Sun, 26 October 2014, 08:38:36
Thanks for the clarification Cody. Do you know if you will be carrying the cherry PCB-mount stabilizers in the CtrlAlt-store?
What say you Bunny?
yeah i have some on hand now, if you let me know what you need i can add them to your order etc
Post by: BunnyLake on Tue, 28 October 2014, 05:39:01
ill take some glory shots later today when i have some time
and the pcb only orders will go out over the next couple days
Post by: Sent on Tue, 28 October 2014, 05:58:40
ok, pcbs are in
ill take some glory shots later today when i have some time
and the pcb only orders will go out over the next couple days
Woot woot!
Post by: BunnyLake on Tue, 28 October 2014, 06:10:27
Post by: Flamingchook on Tue, 28 October 2014, 06:26:34
Show Image(http://i.imgur.com/jSCXsA2.jpg)
Oh man those are seriously sexy. I might have to order another one to use in my FMJ case instead of waiting for my GH60 pcbs.
I seem to recall earlier that there was possibly going to be purple pcb's at some point? Any word on those? I can't imagine they would too soon if they're a thing at all.
Post by: Sent on Tue, 28 October 2014, 06:46:39
Show Image(http://i.imgur.com/jSCXsA2.jpg)
That's pretty nice. Black PCB's are so clean.
Post by: nereme on Tue, 28 October 2014, 07:03:16
Thanks for the clarification Cody. Do you know if you will be carrying the cherry PCB-mount stabilizers in the CtrlAlt-store?
What say you Bunny?
yeah i have some on hand now, if you let me know what you need i can add them to your order etc
how much extra for the Stabs bunny I will need a couple for my pcb
Post by: Moralless on Tue, 28 October 2014, 07:49:28
Show Image(http://i.imgur.com/jSCXsA2.jpg)
Show Image(http://i.imgur.com/jSCXsA2.jpg)
I love the look of those PCBs! Just can't decide whether to spend my next keyboard fund on another custom project, this or a HHKB :-\
Post by: jorgenslee on Tue, 28 October 2014, 08:12:29
Show Image(http://i.imgur.com/jSCXsA2.jpg)
Pretty excited on this. I do hope I could receive this before holidays rush in.
Post by: feizor on Tue, 28 October 2014, 08:21:43
Post by: MrMen on Tue, 28 October 2014, 10:41:26
Post by: Flyersfan1 on Tue, 28 October 2014, 10:53:53
Do you have some spare in stock which could be sent with my jd40 order? Those PCB are awesome!+1 I would love to order a pcb now for a future project! Are there any leftovers for people who didn't join the group buy? I so love the logo on the back too!
Post by: BunnyLake on Tue, 28 October 2014, 11:00:15
Post by: bueller on Tue, 28 October 2014, 11:02:08
they are still available to order from the site for anyone who wants one
Ohhhh thats tempting. I don't NEED another one but I really want another anyway!
Post by: Belfong on Tue, 28 October 2014, 11:10:16
Post by: azhdar on Tue, 28 October 2014, 11:16:29
I don't know what to do with a PCB but I can't believe I'm entertaining thoughts of buying one just so I can frame it up alongside the smaller CTRL Alt sticker for display purposes. Get out of my mind, thoughts!!
It sure would look good framed .
Post by: margo baggins on Tue, 28 October 2014, 11:18:55
I don't know what to do with a PCB but I can't believe I'm entertaining thoughts of buying one just so I can frame it up alongside the smaller CTRL Alt sticker for display purposes. Get out of my mind, thoughts!!
This guy!
Do it :) We can all sign it hehe
Post by: BunnyLake on Tue, 28 October 2014, 11:19:00
I don't know what to do with a PCB but I can't believe I'm entertaining thoughts of buying one just so I can frame it up alongside the smaller CTRL Alt sticker for display purposes. Get out of my mind, thoughts!!
i have one framed already next to a gh60 pcb jd had made for me ages ago
Post by: Belfong on Tue, 28 October 2014, 11:23:40
Please don't show me a photo of that!I don't know what to do with a PCB but I can't believe I'm entertaining thoughts of buying one just so I can frame it up alongside the smaller CTRL Alt sticker for display purposes. Get out of my mind, thoughts!!
i have one framed already next to a gh60 pcb jd had made for me ages ago
Don't!
He he. Seriously, no!
Post by: radio_killah on Tue, 28 October 2014, 11:27:10
Show Image(http://i.imgur.com/jSCXsA2.jpg)
Dang.. seriously disappointed that I didn't just get it from you guys! I ended up buying a separate black PCB from GON directly. That CTRLALT logo is just straight money.
Post by: BunnyLake on Tue, 28 October 2014, 11:34:35
they will actually leave me in the morning, ill try and get the rest done tonight, but failing that ill have them packed tomorrow and out thursday
Post by: uns211 on Tue, 28 October 2014, 12:36:57
Post by: Ripudio on Tue, 28 October 2014, 13:06:22
Post by: BunnyLake on Tue, 28 October 2014, 13:17:07
Hey BunnyLake - I tried placing an order for the PCB (+ lube) about a week and a half ago, but my Order History still says "Processing" I'm not sure if it should be charged yet, I just didn't want to miss out on this buy.
i odnt have the payment through this end, sometimes it sticks on that if the payment didnt go through on stripe
if you could check with your payment method, and see if the money has come out, if it has, ill sort it for you, if it hasnt, perhaps i could invoice you via paypal or something?
Post by: Ripudio on Tue, 28 October 2014, 13:22:28
Post by: BunnyLake on Tue, 28 October 2014, 13:35:02
It definitely hasn't shown up on my credit card statement. Would it be easier for me to place a new order or you could invoice me, whatever is easier for you. (I wanted to get some of the thick switch lube as well, and switch stickers if you guys have them). Thanks!
im out of thick lube at the moment sadly, just spring and thin left, but if you place a new order, leave it unpaid, then pm me the order number and a paypal email, i can get you invoiced
Post by: ceflame on Tue, 28 October 2014, 15:24:48
Thanks Bunny!
Post by: Chemisery on Tue, 28 October 2014, 19:30:34
Post by: Shiftshape on Wed, 29 October 2014, 04:11:57
Show Image(http://i.imgur.com/jSCXsA2.jpg)
Oh. My. Gawd. I think I just came a bit... Totes have to get a clear case for this baby. :)
Post by: BunnyLake on Wed, 29 October 2014, 09:57:32
everyone's order that went out should have a shipping notification via email, but you can also check your status on the site
really hope we get some picks when these arrive and get built up
i love em
Post by: jorgenslee on Wed, 29 October 2014, 10:00:58
i got 22 orders out today
everyone's order that went out should have a shipping notification via email, but you can also check your status on the site
really hope we get some picks when these arrive and get built up
i love em
How about mine Sir BunnyLake?
Post by: BunnyLake on Wed, 29 October 2014, 10:05:07
i got 22 orders out today
everyone's order that went out should have a shipping notification via email, but you can also check your status on the site
really hope we get some picks when these arrive and get built up
i love em
How about mine Sir BunnyLake?
just waiting to get the switch counts i have here back so i can sort out yoru final order and get it sorted for you, ill be messaging you either late tonight or early tomorrow
Post by: jorgenslee on Wed, 29 October 2014, 10:07:15
i got 22 orders out today
everyone's order that went out should have a shipping notification via email, but you can also check your status on the site
really hope we get some picks when these arrive and get built up
i love em
How about mine Sir BunnyLake?
just waiting to get the switch counts i have here back so i can sort out yoru final order and get it sorted for you, ill be messaging you either late tonight or early tomorrow
Cool. Thanks. Glad to hear that. Looking forward to it.
Post by: henz on Wed, 29 October 2014, 17:21:38
Post by: BunnyLake on Thu, 30 October 2014, 11:35:30
Post by: bladegesnow on Thu, 30 October 2014, 18:42:15
Is PCB + Housing order still open? :)) :)) :))
Post by: BunnyLake on Thu, 30 October 2014, 18:43:21
Just one question:
Is PCB + Housing order still open? :)) :)) :))
yup
Post by: add1ct3dd on Mon, 03 November 2014, 05:03:04
just a quick reminder you said to create the order and you'd work out the cost (we worked out a rough cost, I think you were going to finalize and set it on the order), I did that a week or so ago - did you want me to send you the order id? :) (it's #019669) - cool order number :D
Cheers
Matt
Post by: asdfjkl36 on Mon, 03 November 2014, 18:29:06
Looks GREAT!
Cant wait to start building it. But that wont be for a while.
(http://i.imgur.com/BesDpPR.jpg)
(http://i.imgur.com/67ANfeU.jpg)
(http://i.imgur.com/DTzb1a2.jpg)
(http://i.imgur.com/eDyjii4.jpg)
Post by: shimmy1996 on Mon, 03 November 2014, 19:17:34
Sent you a PM regarding my order
I was hoping to add diodes, switches, leds, etc XD
Post by: BunnyLake on Mon, 03 November 2014, 19:19:43
Hey Bunny,
just a quick reminder you said to create the order and you'd work out the cost (we worked out a rough cost, I think you were going to finalize and set it on the order), I did that a week or so ago - did you want me to send you the order id? :) (it's #019669) - cool order number :D
Cheers
Matt
Hi Bunny
Sent you a PM regarding my order
I was hoping to add diodes, switches, leds, etc XD
hey guys
ill sort both of you out, i have a crazy crazy busy week right now so im not gonna be on super lots apart form behind the scenes stuff
but ill hunt both your messages down asap
Post by: Sygaldry on Mon, 03 November 2014, 19:36:41
Post by: uns211 on Mon, 03 November 2014, 21:44:55
Just got my PCB in today.
Looks GREAT!
Cant wait to start building it. But that wont be for a while.Show Image(http://i.imgur.com/BesDpPR.jpg)Show Image(http://i.imgur.com/67ANfeU.jpg)Show Image(http://i.imgur.com/DTzb1a2.jpg)Show Image(http://i.imgur.com/eDyjii4.jpg)
Lucky... I also live in California so I should get it soon.
Post by: Shiftshape on Tue, 04 November 2014, 15:22:15
First time ordering from [CTRL]ALT. too Record speed and excellent job packing sir! Much impressed. :-*
Post by: Ripudio on Wed, 05 November 2014, 09:55:11
Thanks so much for putting this together BunnyLake.
Post by: MrMen on Wed, 05 November 2014, 10:00:23
So I had it this morning and I have just finished my build with reds.
This pcb is so awesome : it looks better IRL than on pictures. One advice : order as soon as posible :thumb:
Post by: uns211 on Thu, 06 November 2014, 01:24:06
Post by: Chemisery on Thu, 06 November 2014, 09:13:24
It's such a beauty! :)
Post by: Oobly on Fri, 07 November 2014, 03:57:44
I ordered 2 PCB's only, but haven't received a shipping notification. Is there something more I need to do?
Post by: BunnyLake on Fri, 07 November 2014, 06:49:51
Hi Bunny,
I ordered 2 PCB's only, but haven't received a shipping notification. Is there something more I need to do?
i still have the last couple PCB only orders to get out, they will leave either tomorrow or monday
we are having out carpets and some decorating done here and its basically required me to be in all the time but with very little internet access
Post by: Oobly on Fri, 07 November 2014, 07:41:34
Hi Bunny,
I ordered 2 PCB's only, but haven't received a shipping notification. Is there something more I need to do?
i still have the last couple PCB only orders to get out, they will leave either tomorrow or monday
we are having out carpets and some decorating done here and its basically required me to be in all the time but with very little internet access
Okay, no problem. Thank you for the prompt response! Hope the renovation / decorating goes well :)
Post by: Lubed Up Slug on Fri, 07 November 2014, 23:28:17
Post by: uns211 on Sat, 08 November 2014, 00:35:54
Post by: Karura on Sat, 08 November 2014, 00:39:32
Post by: Sygaldry on Sat, 08 November 2014, 10:00:39
Hey guys, just wondering, how does this PCB differ from the ones that Gon sells as NerD 60? Thinking of picking one up, if they're still available in the Ctrl Alt shop.It's the same as the Ver1 PCB I believe
Post by: Glod on Sun, 09 November 2014, 00:08:54
As promised, here is my build: http://imgur.com/a/wEQoH
I find it interesting you mounted the through hole diodes underneath instead on top, I mounted on top on my nerd60 and phantom and still had clearance for a plate. Underneath can cause clearance issues with some cases.
Post by: Ripudio on Sun, 09 November 2014, 00:39:02
Post by: Glod on Sun, 09 November 2014, 01:28:56
Post by: uns211 on Sun, 09 November 2014, 21:55:32
Post by: DanielT on Mon, 10 November 2014, 00:10:11
Post by: henz on Mon, 10 November 2014, 02:49:44
Post by: Shiftshape on Wed, 12 November 2014, 07:58:56
Post by: epicepee on Wed, 19 November 2014, 13:08:56
Post by: BunnyLake on Wed, 19 November 2014, 17:41:10
Any word on how long they're taking to come, at this point? Apparently shipping is quick -- how long do they take to ship after they're ordered?
all pcb orders have shipped unless you made it in the last few days or so, if thats the case, then ill be shipping some time late this week, if you ordered a while ago and it hasnt come, shoot me your order number via pm and ill sort it out for you
Post by: Crabby_b on Thu, 20 November 2014, 10:23:03
Any word on how long they're taking to come, at this point? Apparently shipping is quick -- how long do they take to ship after they're ordered?
all pcb orders have shipped unless you made it in the last few days or so, if thats the case, then ill be shipping some time late this week, if you ordered a while ago and it hasnt come, shoot me your order number via pm and ill sort it out for you
Is this for PCB only orders, or PCB and housing orders as well?
Post by: BunnyLake on Thu, 20 November 2014, 14:20:03
Any word on how long they're taking to come, at this point? Apparently shipping is quick -- how long do they take to ship after they're ordered?
all pcb orders have shipped unless you made it in the last few days or so, if thats the case, then ill be shipping some time late this week, if you ordered a while ago and it hasnt come, shoot me your order number via pm and ill sort it out for you
Is this for PCB only orders, or PCB and housing orders as well?
pcb orders
Post by: Lubed Up Slug on Mon, 01 December 2014, 19:33:18
Post by: Ripudio on Mon, 01 December 2014, 21:18:47
http://www.gonskeyboardworks.com/electric-parts/15-resistorssmd-100-pcs.html
Post by: aaronz8 on Tue, 02 December 2014, 00:27:48
Hey guys, just wondering, how does this PCB differ from the ones that Gon sells as NerD 60? Thinking of picking one up, if they're still available in the Ctrl Alt shop.It's the same as the Ver1 PCB I believe
I tried searching but couldn't find any info on the differences between Ver1 and Ver2. Anything significant?
Update: I just got this response from GON:
Quote
Differences between V1 and V2 are
1. Optional Bluetooth connection availability(USB/BT combo)
2. On-PCB Backlight LEDs
The second is only available /w NerD "Crystal" housings.
Thanks,
GON
Post by: jorgenslee on Tue, 02 December 2014, 00:40:27
Hey guys, just wondering, how does this PCB differ from the ones that Gon sells as NerD 60? Thinking of picking one up, if they're still available in the Ctrl Alt shop.It's the same as the Ver1 PCB I believe
I tried searching but couldn't find any info on the differences between Ver1 and Ver2. Anything significant?
Someone correct me if I am wrong but I think the main difference is that Ver2 is compatible to GON's wireless module while the Ver1 is not.
Post by: Lubed Up Slug on Sat, 06 December 2014, 01:13:09
Post by: henz on Sun, 07 December 2014, 09:18:56
So when will this be shipping?
If you ordered pcb only you should have gotten it already i guess. But if you order a case too i guess the answer is whenever bunny says that they are ready here in the thread :) Have not seen any updates about it.
Post by: BunnyLake on Sun, 07 December 2014, 09:20:33
So when will this be shipping?
yeah if you ordered the first round of pcbs they have gone out, unless you made an order in the last week or so
as for the case orders, they will go out as soon as we have them
Post by: asdfjkl36 on Thu, 11 December 2014, 06:03:53
Any news about switches,resistors,leds etc ?
any update on this?
would like to put in an order to get these before Christmas if possible.
Been holding off from paying the $25 shipping from Gon.
Post by: henz on Thu, 11 December 2014, 07:01:07
Any news about switches,resistors,leds etc ?
any update on this?
would like to put in an order to get these before Christmas if possible.
Been holding off from paying the $25 shipping from Gon.
It seems CTRL alt is running al kinds of stuff all over the place so i guess this does not have the highest prio.
I found everything i needed from a local supplier(Sweden) and its easier when you know what you are looking for, i found everything except good in siwtch leds. PM me if you need any help also you should be able to find everything in the US i guess.
Post by: BunnyLake on Thu, 11 December 2014, 08:15:42
Any news about switches,resistors,leds etc ?
any update on this?
would like to put in an order to get these before Christmas if possible.
Been holding off from paying the $25 shipping from Gon.
sorry ive just had like zero time the last 6 or so weeks
we have everything here its just a case of doing pics etc
we are also doing a rebuild on the site right now, so waiting for that to finish up
Post by: asdfjkl36 on Thu, 11 December 2014, 13:26:34
Any news about switches,resistors,leds etc ?
any update on this?
would like to put in an order to get these before Christmas if possible.
Been holding off from paying the $25 shipping from Gon.
sorry ive just had like zero time the last 6 or so weeks
we have everything here its just a case of doing pics etc
we are also doing a rebuild on the site right now, so waiting for that to finish up
Dont be sorry. I'm just impatient even though i wont be building it until after the holidays, i want to have all the stuff together or at least ordered to get it ASAP.
I have no real need to have them right now.
I understand and i apologize for being pushy about it.
I'll go ahead and wait and use the difference in shipping price and cost in items to tip you guys. You deserve it for all the hard work you guys put in.
Thanks!
Post by: MrRooks on Sat, 20 December 2014, 12:10:47
Thanks!
Post by: BunnyLake on Sat, 20 December 2014, 12:27:32
I couldn't find this clearly written so sorry for asking... Is this a GON PCB? If so how is it different from the NerD 2.0?
Thanks!
yeah its a nerd 60, its just rebranded for us for a limited edition run
Post by: Zentaaa on Sat, 20 December 2014, 12:42:53
Post by: MrRooks on Sat, 20 December 2014, 13:39:08
I couldn't find this clearly written so sorry for asking... Is this a GON PCB? If so how is it different from the NerD 2.0?
Thanks!
yeah its a nerd 60, its just rebranded for us for a limited edition run
Cool! thanks!
Post by: BunnyLake on Sat, 20 December 2014, 13:44:21
Hey bunz I ordered a PCB only on the 27th of november, any idea when it will be shipped? Thanks
i went though all the pcbs i had here, i just need to grab the extra one from margo, so ill get that sorted for you soon, sorry about that and we have a bunch more on the way shortly as well
Post by: Flamingchook on Sat, 20 December 2014, 21:25:12
Post by: BunnyLake on Sun, 21 December 2014, 06:29:29
Any eta on the cases and assembly at this point?
should be shortly after christmas, i will be messaging everyone to confirm builds soon
Post by: henz on Mon, 19 January 2015, 15:38:02
Any eta on the cases and assembly at this point?
should be shortly after christmas, i will be messaging everyone to confirm builds soon
Any news? Want to get my soldering on :)
Post by: BunnyLake on Mon, 19 January 2015, 16:42:22
Post by: Phinominal on Fri, 23 January 2015, 15:21:44
Post by: BunnyLake on Fri, 23 January 2015, 15:32:59
Is it possible to have the plate support HHKB layout? With the bottom 2 corners not cut out for the switches.
sadly not at this time
Post by: DanielT on Sun, 01 February 2015, 05:24:53
Post by: BunnyLake on Sun, 01 February 2015, 08:30:38
Is the PCB still available ? I would like to order one. On the website it looks like it's available but I want to make sure.
it is, although itll be about 3 weeks until i have more land with me, so just be aware of that,
thatll be the alst shipment along with the cases, and i wont be running then again after that
Post by: BunnyLake on Mon, 02 February 2015, 08:17:15
the next run of pcbs will be with us the beginning of march, so 4 weeks
the cases will be with us late march, about 7 weeks
all pcb and pcb and case orders will be sent right away (90% of orders)
there is only a handful of custom builds for these, they will be turned around within about a week
so slightly longer than expected but we wanted these absolutely perfect
Post by: Ouro on Thu, 05 February 2015, 07:45:00
Post by: BunnyLake on Thu, 05 February 2015, 07:46:12
Is the housing an acrylic plate sandwiched in between two aluminum plates?
yeah that is correct, it has an acrylic section to allow for a backlighting glow
Post by: henz on Wed, 11 February 2015, 01:13:53
update
the next run of pcbs will be with us the beginning of march, so 4 weeks
the cases will be with us late march, about 7 weeks
all pcb and pcb and case orders will be sent right away (90% of orders)
there is only a handful of custom builds for these, they will be turned around within about a week
so slightly longer than expected but we wanted these absolutely perfect
will you still be sending confirmation pms? as i want to change my order a bit.
Post by: DanielT on Fri, 13 February 2015, 08:24:24
Post by: Bromono on Fri, 13 February 2015, 09:27:34
Post by: Phinominal on Wed, 18 February 2015, 02:57:00
Does that mean the groupbuy isn't going anymore?
Post by: radio_killah on Wed, 18 February 2015, 11:34:26
Is the order link working for anyone else? Says the site is being remodeled.
Does that mean the groupbuy isn't going anymore?
I think it means the site is being remodeled. :blank:
Kidding. But I think that Ctrlalt said that the GB would be ending soon, so not sure if it will be up or not when the store comes back after they apply their changes.
Post by: BunnyLake on Wed, 18 February 2015, 13:01:03
Is the order link working for anyone else? Says the site is being remodeled.
Does that mean the groupbuy isn't going anymore?
I think it means the site is being remodeled. :blank:
Kidding. But I think that Ctrlalt said that the GB would be ending soon, so not sure if it will be up or not when the store comes back after they apply their changes.
we will have some of the pcbs when the store comes back, but no more cases
Post by: MassiveAggresive on Fri, 20 February 2015, 23:17:56
Post by: DanielT on Sat, 21 February 2015, 00:43:05
Will this pcb fit in an aluminum tex case?Yes, it fits in any Poker compatible case.
Post by: RavenII on Thu, 26 February 2015, 14:40:36
Post by: Zentaaa on Thu, 26 February 2015, 15:17:58
Post by: BunnyLake on Thu, 26 February 2015, 15:34:31
Is it possible that I can transfer my order to someone else as I no longer need it?
of course, you can change the address on your order at any time
Post by: Zentaaa on Thu, 26 February 2015, 16:14:53
Okay sweet, if anyone wants my order of a PCB then message me! ThanksssssIs it possible that I can transfer my order to someone else as I no longer need it?
of course, you can change the address on your order at any time
Post by: Phinominal on Thu, 26 February 2015, 16:55:16
Okay sweet, if anyone wants my order of a PCB then message me! Thanksssss
If only you had the case as well = (
Post by: Ngt on Thu, 26 February 2015, 17:19:00
Post by: BunnyLake on Thu, 26 February 2015, 17:20:06
Bunny, do you know how many PCB will be remaining once the store is back alive?
ill have somewhere between 7 or 8 spare in stock in a week or 2
Post by: Ngt on Thu, 26 February 2015, 17:31:11
Bunny, do you know how many PCB will be remaining once the store is back alive?
ill have somewhere between 7 or 8 spare in stock in a week or 2
Cool thanks. Good to know.
Post by: RavenII on Thu, 26 February 2015, 18:29:01
Post by: Sent on Thu, 26 February 2015, 18:34:27
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?
I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.
Post by: Ngt on Fri, 27 February 2015, 08:16:57
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?
I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.
I think he posted also that there weren't any case left.
EDIT: Here you go.
we will have some of the pcbs when the store comes back, but no more cases
Post by: BunnyLake on Fri, 27 February 2015, 08:18:18
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?
I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.
I think he posted also that there weren't any case left.
i have 1 spare case left
i havent decided yet if im gonna keep it as like an extra for myself, or sell it, or give it away yet, we shall see
Post by: Ngt on Fri, 27 February 2015, 08:19:44
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?
I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.
I think he posted also that there weren't any case left.
i have 1 spare case left
i havent decided yet if im gonna keep it as like an extra for myself, or sell it, or give it away yet, we shall see
That's interesting indeed! Bunny, you always have some nice surprise in your magician hat. :D
Post by: asdfjkl36 on Fri, 27 February 2015, 08:38:07
Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out
I mainly just can't wait to see how they came out :D
Post by: Ngt on Fri, 27 February 2015, 08:43:05
Very interesting to see what you do with it
Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out
I mainly just can't wait to see how they came out :D
If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0 (https://geekhack.org/index.php?topic=67194.0)
You won't have the fancy details the CtrlAlt team added on it, but it still is nice.
Post by: asdfjkl36 on Fri, 27 February 2015, 08:46:44
Very interesting to see what you do with it
Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out
I mainly just can't wait to see how they came out :D
If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0 (https://geekhack.org/index.php?topic=67194.0)
You won't have the fancy details the CtrlAlt team added on it, but it still is nice.
Thanks, I'll keep and eye on it.
Maybe someone will end up (I don't know why but) selling their case in the classifieds and I'll pick it up. It would be nice to have the entire [CTRL]Alt setup though, so the custom case would be ideal
Post by: Ngt on Fri, 27 February 2015, 09:02:59
Very interesting to see what you do with it
Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out
I mainly just can't wait to see how they came out :D
If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0 (https://geekhack.org/index.php?topic=67194.0)
You won't have the fancy details the CtrlAlt team added on it, but it still is nice.
Thanks, I'll keep and eye on it.
Maybe someone will end up (I don't know why but) selling their case in the classifieds and I'll pick it up. It would be nice to have the entire [CTRL]Alt setup though, so the custom case would be ideal
Yeah the case is definitely nice. I don't think someone will sell theirs soon. Perhaps some ordered multiple of them in order to sell them afterwards. If so it is going to be pricey I'm afraid.
Post by: Ngt on Fri, 27 February 2015, 09:12:28
Post by: asdfjkl36 on Fri, 27 February 2015, 09:58:44
I don't remember but the PCB allows for both PCB mounting or case mounting right?Works for pcb mounting, so if you find a plate then you can use plate mounted switches
As far as I know, they both work
Post by: Ngt on Fri, 27 February 2015, 10:02:20
I don't remember but the PCB allows for both PCB mounting or case mounting right?Works for pcb mounting, so if you find a plate then you can use plate mounted switches
As far as I know, they both work
It might have been a stupid question as it is the first DIY build I am considering doing. I wondered if there is a difference in PCB when you intend to mount whether on a plate or on the PCB. Like there is for the switches. I guess there are 2 kinds of stabs whether you mount them on PCB or on a plate, aren't there?
Post by: asdfjkl36 on Fri, 27 February 2015, 11:32:24
I don't remember but the PCB allows for both PCB mounting or case mounting right?Works for pcb mounting, so if you find a plate then you can use plate mounted switches
As far as I know, they both work
It might have been a stupid question as it is the first DIY build I am considering doing. I wondered if there is a difference in PCB when you intend to mount whether on a plate or on the PCB. Like there is for the switches. I guess there are 2 kinds of stabs whether you mount them on PCB or on a plate, aren't there?
It's my first complete build I'm doing myself so I came across all the same questions when buying my parts a few months ago in preparation.
But yes, you buy the specific type stabs for how you are going to build. PCB mount stabs or plate mounted
If your pcb supports pcb mounting, then you can do both since you can always toss a plate on top.
A plate mounted only pcb will not have the holes for the legs of a pcb mount switch to fit in to settle down on to the plate
(http://cherrycorp.com/wp-content/uploads/2014/12/mx_mntop.gif)
Anyone is free to correct me or explain it better if you can haha
Post by: Ngt on Fri, 27 February 2015, 12:31:12
I don't remember but the PCB allows for both PCB mounting or case mounting right?Works for pcb mounting, so if you find a plate then you can use plate mounted switches
As far as I know, they both work
It might have been a stupid question as it is the first DIY build I am considering doing. I wondered if there is a difference in PCB when you intend to mount whether on a plate or on the PCB. Like there is for the switches. I guess there are 2 kinds of stabs whether you mount them on PCB or on a plate, aren't there?
It's my first complete build I'm doing myself so I came across all the same questions when buying my parts a few months ago in preparation.
But yes, you buy the specific type stabs for how you are going to build. PCB mount stabs or plate mounted
If your pcb supports pcb mounting, then you can do both since you can always toss a plate on top.
A plate mounted only pcb will not have the holes for the legs of a pcb mount switch to fit in to settle down on to the plateShow Image(http://cherrycorp.com/wp-content/uploads/2014/12/mx_mntop.gif)
Anyone is free to correct me or explain it better if you can haha
Thanks for your explanation.
My question was more about if we could use pcb mount stabs onto a plate? For example, you can transform a PCB mounted switch to a plate mount switch just by cutting the little legs of your switches. I wonder if there is something similar for stabs or just have to order the right stabs at first.
Btw do you have an address where I could get some plate mounted stabs?
Post by: DanielT on Fri, 27 February 2015, 12:49:28
Other plates support plate mounted stabs in this case you have 2 types, Costar and Cherry, some plates can take both other not, depends on the cutout. You can not make a plate mount Cherry stab out of a PCB one.
Costar stabs can be bought from mechanicalkeyboards , Cherry are harder to find, I think mouser has them but you have to buy a lot of them. There was also a GB ran by Ivan.
Post by: asdfjkl36 on Fri, 27 February 2015, 15:05:22
There are some people who sell me here in the classifieds
Not sure if that still applies
Post by: Ngt on Sat, 28 February 2015, 05:14:16
It depends a lot on the plate you are using, for example some support PCB mounted stabs, this is the case for a lot korean boards. PCB mounted stabs are only from Cherry.
Other plates support plate mounted stabs in this case you have 2 types, Costar and Cherry, some plates can take both other not, depends on the cutout. You can not make a plate mount Cherry stab out of a PCB one.
Costar stabs can be bought from mechanicalkeyboards , Cherry are harder to find, I think mouser has them but you have to buy a lot of them. There was also a GB ran by Ivan.
Thanks for more info Daniel
There are some people who sell me here in the classifieds
Not sure if that still applies
Alright thanks guys. I'll dig that up.
Post by: jorgenslee on Fri, 06 March 2015, 06:03:30
Post by: BunnyLake on Mon, 09 March 2015, 12:04:17
the pcbs are on hand with him and he is currently soldering the controllers on and will be shipped to me late this week/ early next week
the cases are currently with the cnc factory and he will let me know as soon as they are ready
Post by: jorgenslee on Mon, 09 March 2015, 13:12:39
spoke to gon today
the pcbs are on hand with him and he is currently soldering the controllers on and will be shipped to me late this week/ early next week
the cases are currently with the cnc factory and he will let me know as soon as they are ready
is there an extra or all the pcb has been sold out already?
Post by: Ngt on Mon, 09 March 2015, 16:42:48
spoke to gon today
the pcbs are on hand with him and he is currently soldering the controllers on and will be shipped to me late this week/ early next week
the cases are currently with the cnc factory and he will let me know as soon as they are ready
is there an extra or all the pcb has been sold out already?
Last time someone asked the question he said there were ~20 PCB left.
Post by: Bromono on Mon, 09 March 2015, 16:48:47
Post by: tpc2084 on Thu, 12 March 2015, 09:36:25
Post by: BunnyLake on Thu, 12 March 2015, 09:40:26
If there are PCBs left I would grab one
i have 8 left, well a actually 5 as 3 are spoken for, they will be in the store when it relaunches shortly
PM'd BunnyLake about buying one of the remaining PCBs!
replied
Post by: Bromono on Thu, 12 March 2015, 19:24:03
Oh man... Going to be watching it like a hawk...If there are PCBs left I would grab one
i have 8 left, well a actually 5 as 3 are spoken for, they will be in the store when it relaunches shortlyPM'd BunnyLake about buying one of the remaining PCBs!
replied
Post by: DanielT on Thu, 19 March 2015, 11:09:44
Post by: BunnyLake on Thu, 19 March 2015, 11:23:08
Any updates on the PCB's ? :)
the last update i had from gon was last week, saying they are on hand and he is soldering the controllers and they would be shipping this week, but he hasnt updated me since, ill send him a follow up now
Post by: DanielT on Thu, 19 March 2015, 11:30:05
Post by: elretto on Wed, 25 March 2015, 14:14:10
Post by: BunnyLake on Wed, 25 March 2015, 14:16:01
any news from gon?
ive left him some messages but havent heard back yet
he has posted something in his forum that he is working through some delays and such
as soon as i hear back from him ill update here
Post by: rsadek on Sat, 28 March 2015, 22:43:04
Anyone have any neat ideas or special plans to share?
-R
Post by: Sent on Sat, 28 March 2015, 23:16:12
I'm curious about people's planned configurations. What color schemes will you use for keycaps, smd LEDs, switch LEDs, etc.?
Anyone have any neat ideas or special plans to share?
-R
I have a special one coming that involves lots of purple.
Post by: byker on Sun, 29 March 2015, 01:30:55
I'm curious about people's planned configurations. What color schemes will you use for keycaps, smd LEDs, switch LEDs, etc.?
Anyone have any neat ideas or special plans to share?
-R
I have a special one coming that involves lots of purple.
Lots of purple is good! ;)
Post by: Ngt on Thu, 02 April 2015, 02:42:59
Does the PCB come presoldered with diodes and smd?
Post by: DanielT on Thu, 02 April 2015, 02:48:22
Any chance there is a spare case available?The PCB has only the controller parts soldered, you need to solder diodes (it supports both DIP/thru hole and SMD diodes) and resistors for LED's (SMD).
Does the PCB come presoldered with diodes and smd?
Maybe something has changed with this batch but this is how it was initially.
Post by: asdfjkl36 on Thu, 02 April 2015, 02:50:09
Any chance there is a case available?
Does the PCB come presoldered with diodes and smd?
I'm pretty sure there are no extra cases ( I completely regret not buying one and forgot to place an order anyway)
The PCBs have the controllers pre soldered but that's it. You solder the diodes and resistors
I believe you can order directly from GON to have these pre-soldered to your liking.
Edit: DanielT beat me to it.
Forgot to submit and got distracted lol
Post by: Ngt on Thu, 02 April 2015, 03:03:58
Any chance there is a spare case available?The PCB has only the controller parts soldered, you need to solder diodes (it supports both DIP/thru hole and SMD diodes) and resistors for LED's (SMD).
Does the PCB come presoldered with diodes and smd?
Maybe something has changed with this batch but this is how it was initially.
Alright I was asking for the case just in case something has changed because I'd be interested to get one.Any chance there is a case available?
Does the PCB come presoldered with diodes and smd?
I'm pretty sure there are no extra cases ( I completely regret not buying one and forgot to place an order anyway)
The PCBs have the controllers pre soldered but that's it. You solder the diodes and resistors
I believe you can order directly from GON to have these pre-soldered to your liking.
Edit: DanielT beat me to it.
Forgot to submit and got distracted lol
Considering the diodes and resistors, I heard they are a ***** to solder. As it would be my first time soldering it got me worried a bit. If you can deal with Gon to get them soldered that's cool as well.
Post by: asdfjkl36 on Thu, 02 April 2015, 03:07:35
Any chance there is a spare case available?The PCB has only the controller parts soldered, you need to solder diodes (it supports both DIP/thru hole and SMD diodes) and resistors for LED's (SMD).
Does the PCB come presoldered with diodes and smd?
Maybe something has changed with this batch but this is how it was initially.Alright I was asking for the case just in case something has changed because I'd be interested to get one.Any chance there is a case available?
Does the PCB come presoldered with diodes and smd?
I'm pretty sure there are no extra cases ( I completely regret not buying one and forgot to place an order anyway)
The PCBs have the controllers pre soldered but that's it. You solder the diodes and resistors
I believe you can order directly from GON to have these pre-soldered to your liking.
Edit: DanielT beat me to it.
Forgot to submit and got distracted lol
Considering the diodes and resistors, I heard they are a ***** to solder. As it would be my first time soldering it got me worried a bit. If you can deal with Gon to get them soldered that's cool as well.
If you take your time with soldering, it's not too difficult, but the resistors for the bottom/side LEDs are VERY small, which will be troublesome
I would recommend asking/waiting for a reply from Bunny to see if there is a pre-soldered option or any solution to avoid the SMD soldering
Post by: DanielT on Thu, 02 April 2015, 03:08:42
For SMD that's another thing, you need some experience and a decent soldering station. I was able to solder with my Antex iron a few resistors but it's a pain.
But I would highly recommend to get one PCB, the quality is better than anything I have ever seen, and for starters you can solder only diodes and when you have the time do also the resistors.
Post by: Ngt on Thu, 02 April 2015, 03:13:11
If you use DIP diodes the job is simple, don't need advanced soldering skills, only a decent soldering iron for example this one is really good for the price http://www.antex.co.uk/soldering/standard-soldering-irons/xs25/ and it's not some piece of crap made on some ship.
For SMD that's another thing, you need some experience and a decent soldering station. I was able to solder with my Antex iron a few resistors but it's a pain.
But I would highly recommend to get one PCB, the quality is better than anything I have ever seen, and for starters you can solder only diodes and when you have the time do also the resistors.
Fair enough, thanks.
IIRC, the diodes are for the switches to work and resistance are for the LED?
Post by: DanielT on Thu, 02 April 2015, 03:42:08
If I were you I wouldn't miss on a limited edition NerD60 :cool: This is the last chance.
Post by: Zentaaa on Thu, 02 April 2015, 06:26:53
Post by: BunnyLake on Thu, 02 April 2015, 07:45:08
so i assume everything is ready to ship, but once i actually get to speak to him ill update again
Post by: Ngt on Thu, 02 April 2015, 09:35:56
I have a pcb only order if anyone wants to take it off my hands? :thumb:I could take it but we'll have to see how it goes with Bunny if it is doable or not.
Yep, diodes are for the switches. You need resistors only if you want LED's. [CTRL]ALT store has also the diodes (DIP) so you can order everything in one place.Thanks for the info. I'll see if I can get one.
If I were you I wouldn't miss on a limited edition NerD60 :cool: This is the last chance.
finally got a message from gon last night when i was offline
so i assume everything is ready to ship, but once i actually get to speak to him ill update again
Thanks for letting us know. If by any chance you'd have a spare case, I'd be happy to buy it!
Post by: DanielT on Thu, 02 April 2015, 09:49:05
If I was able to do it you can do it, I have zero soldering skills. Practice before on some scrap PCB with some wires and stuff like that and you will get the hang of it. For SMD is another story, for that you need more practice.Yep, diodes are for the switches. You need resistors only if you want LED's. [CTRL]ALT store has also the diodes (DIP) so you can order everything in one place.Thanks for the info. I'll see if I can get one.
If I were you I wouldn't miss on a limited edition NerD60 :cool: This is the last chance.
Post by: BunnyLake on Sun, 05 April 2015, 13:04:55
however when i was asleep cody spoke to him
he said that the controllers are all soldered on to the last of the pcbs and they are ready, and the cases are undergoing final processing stage
Post by: BunnyLake on Mon, 06 April 2015, 06:36:52
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
Post by: PunksDead on Mon, 06 April 2015, 06:53:41
hey guys
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
Awesome to hear, thanks for the update Bunny! Cannot wait to see the finished product after gon works his magic
Post by: Ngt on Mon, 06 April 2015, 12:06:32
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
Post by: Zeroo on Mon, 06 April 2015, 12:15:03
Post by: BunnyLake on Mon, 06 April 2015, 12:41:59
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
Post by: asdfjkl36 on Mon, 06 April 2015, 13:27:07
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
Yes!
If a case is possible, I'd be interested :D (not commuted, but interested)
Also, if it is possible to do it and ship separately (to not delay the current order) that sounds like a good idea if it would take too long
Post by: Ngt on Mon, 06 April 2015, 13:35:59
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
I've never taken anyone's order previously so I don't know the best way to proceed. I thought that I would pay him over and then I show you the transaction receipt so you could change the delivery address for his order to be shipped to me. Does it sound like a reasonable way to do it? Or shall I just wait for him to receive the goods and then sell it to me?
Concerning the case that'd be wonderful if you could ask him. However I don't want to burden you, if you can't/don't have the time for it that's ok. I believe you are already really busy with all the gb going on atm. As asdfjkl36 stated that'd be best if we don't delay the gb as we are late but if there is a way to do it without delaying and still be in the current shipment that'd be awesome indeed. :thumb:
Thank you again Bunny and sorry for the troubles all of this may cause.
Post by: ghostjuggernaut on Mon, 06 April 2015, 15:17:49
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
I've never taken anyone's order previously so I don't know the best way to proceed. I thought that I would pay him over and then I show you the transaction receipt so you could change the delivery address for his order to be shipped to me. Does it sound like a reasonable way to do it? Or shall I just wait for him to receive the goods and then sell it to me?
Concerning the case that'd be wonderful if you could ask him. However I don't want to burden you, if you can't/don't have the time for it that's ok. I believe you are already really busy with all the gb going on atm. As asdfjkl36 stated that'd be best if we don't delay the gb as we are late but if there is a way to do it without delaying and still be in the current shipment that'd be awesome indeed. :thumb:
Thank you again Bunny and sorry for the troubles all of this may cause.
He can change the shipping address through his account on [CTRL]ALT. Then once the order is shipped it will just go to you instead of him.
Post by: Ngt on Mon, 06 April 2015, 15:35:20
hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
I've never taken anyone's order previously so I don't know the best way to proceed. I thought that I would pay him over and then I show you the transaction receipt so you could change the delivery address for his order to be shipped to me. Does it sound like a reasonable way to do it? Or shall I just wait for him to receive the goods and then sell it to me?
Concerning the case that'd be wonderful if you could ask him. However I don't want to burden you, if you can't/don't have the time for it that's ok. I believe you are already really busy with all the gb going on atm. As asdfjkl36 stated that'd be best if we don't delay the gb as we are late but if there is a way to do it without delaying and still be in the current shipment that'd be awesome indeed. :thumb:
Thank you again Bunny and sorry for the troubles all of this may cause.
He can change the shipping address through his account on [CTRL]ALT. Then once the order is shipped it will just go to you instead of him.
No offense to Zentaaa, but if that's the case it also means that he could do it again at any time once I paid him to still get delivered at his place. I don't say he's a bad guy, I just don't know him. It would be safer for me to just order one of the extra Bunny talked about.
Post by: Zentaaa on Mon, 06 April 2015, 15:48:09
Its geekhack man, you ain't gonna get scammed, but if I'm not trustworthy enough then that's your decision :) I have traded with many others here including bunny himself a couple of times!hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
I've never taken anyone's order previously so I don't know the best way to proceed. I thought that I would pay him over and then I show you the transaction receipt so you could change the delivery address for his order to be shipped to me. Does it sound like a reasonable way to do it? Or shall I just wait for him to receive the goods and then sell it to me?
Concerning the case that'd be wonderful if you could ask him. However I don't want to burden you, if you can't/don't have the time for it that's ok. I believe you are already really busy with all the gb going on atm. As asdfjkl36 stated that'd be best if we don't delay the gb as we are late but if there is a way to do it without delaying and still be in the current shipment that'd be awesome indeed. :thumb:
Thank you again Bunny and sorry for the troubles all of this may cause.
He can change the shipping address through his account on [CTRL]ALT. Then once the order is shipped it will just go to you instead of him.
No offense to Zentaaa, but if that's the case it also means that he could do it again at any time once I paid him to still get delivered at his place. I don't say he's a bad guy, I just don't know him. It would be safer for me to just order one of the extra Bunny talked about.
Post by: Ngt on Mon, 06 April 2015, 16:13:23
Its geekhack man, you ain't gonna get scammed, but if I'm not trustworthy enough then that's your decision :) I have traded with many others here including bunny himself a couple of times!hey guysThanks for the update Bunny.
a bit of a mirror for the post above, but this time i have actually had a long chat with gon myself
here is the progress
firstly gon says he is very sorry for the delay,its been a very busy time for him
the pcbs are finished and we even have a few more extras
the cases have finished being machined, and in his words, just need "blaster finish/anodizing" which they are undergoing now and he says he can have everything shipped by the end of this month
ill get pictures of them before they ship and put those up as soon as i have them
As there are few extra PCBs, would there be some more cases as well? Would it be possible to take over Zentaaa's PCB only order too? Thanks.
thats between you and zentaa, but its not problem if you sort it with him
as for the case, there will be one extra, but ill wait until they are all on hand before doing anything with that
if you really wanted to guarantee a case, i could speak to gon and find out how feasible it is to add more to the order at this stage
I've never taken anyone's order previously so I don't know the best way to proceed. I thought that I would pay him over and then I show you the transaction receipt so you could change the delivery address for his order to be shipped to me. Does it sound like a reasonable way to do it? Or shall I just wait for him to receive the goods and then sell it to me?
Concerning the case that'd be wonderful if you could ask him. However I don't want to burden you, if you can't/don't have the time for it that's ok. I believe you are already really busy with all the gb going on atm. As asdfjkl36 stated that'd be best if we don't delay the gb as we are late but if there is a way to do it without delaying and still be in the current shipment that'd be awesome indeed. :thumb:
Thank you again Bunny and sorry for the troubles all of this may cause.
He can change the shipping address through his account on [CTRL]ALT. Then once the order is shipped it will just go to you instead of him.
No offense to Zentaaa, but if that's the case it also means that he could do it again at any time once I paid him to still get delivered at his place. I don't say he's a bad guy, I just don't know him. It would be safer for me to just order one of the extra Bunny talked about.
Well I'll think about it then. ;)
Post by: BunnyLake on Mon, 06 April 2015, 17:16:25
Post by: Ngt on Tue, 07 April 2015, 02:19:33
im happy to confirm the address has been changed and whatnot for you if you go ahead
Cool, good to know thanks Bunny! :-*
Post by: robotox on Tue, 07 April 2015, 10:11:56
Post by: Tiramisuu on Sun, 19 April 2015, 16:23:48
Mostly curious about the jd40's but the "we are remodelling" is obviously bogus.
wtf?
Post by: BunnyLake on Sun, 19 April 2015, 16:24:44
A little off topic but what is up with the ctlalt.io store?
Mostly curious about the jd40's but the "we are remodelling" is obviously bogus.
wtf?
why is it bogus, we are making ctrl alt 2.0, so the store is down whilst we focus on that
Post by: TheMadcap on Sun, 19 April 2015, 20:03:49
Post by: henz on Wed, 22 April 2015, 07:49:39
Post by: BunnyLake on Wed, 22 April 2015, 07:51:12
Bunz, are there any pictures of the case yet.?If so please share !
ill share as soon as i have them
i shot gon a message a couple days ago which im awaiting a realy on, and last i heard about 2 weeks ago they would be ready for shipping at the end of this month, which we are fast approaching
ill send him another follow up now
Post by: henz on Wed, 22 April 2015, 08:14:37
Post by: BunnyLake on Mon, 27 April 2015, 04:28:47
quick update
i just got this emssage from gon
"Hi Bunny, Anodizing factory told me your housings are complete. I will drive to the factory to get them next week. I think I can ship your Housings + PCBs next week."
ive also asked him for pics before they are sent out so as soon as i have them ill share them with everyone
Post by: DanielT on Mon, 27 April 2015, 05:01:54
Post by: henz on Mon, 27 April 2015, 05:10:42
Post by: Joey Quinn on Mon, 27 April 2015, 09:10:31
Post by: asdfjkl36 on Mon, 27 April 2015, 11:30:37
I have a feeling that the pictures that Bunny posts are going to make me wish I bought one. :(
Same :|
Post by: ghostjuggernaut on Mon, 27 April 2015, 15:31:19
hey guysThanks for the update. Can't wait for them to arrive.
quick update
i just got this emssage from gon
"Hi Bunny, Anodizing factory told me your housings are complete. I will drive to the factory to get them next week. I think I can ship your Housings + PCBs next week."
ive also asked him for pics before they are sent out so as soon as i have them ill share them with everyone
Post by: Ngt on Tue, 28 April 2015, 07:37:00
I have a feeling that the pictures that Bunny posts are going to make me wish I bought one. :(
Welcome to the club haha.
Post by: margo baggins on Tue, 28 April 2015, 07:50:51
can't wait for this ****
Post by: nereme on Fri, 01 May 2015, 03:27:05
Post by: Ngt on Fri, 01 May 2015, 13:39:23
Post by: BunnyLake on Mon, 04 May 2015, 07:36:04
(http://i.imgur.com/TAMp6qz.jpg)
(http://i.imgur.com/PNYv9d3.jpg)
just realised the pics are pretty large and arent scaling well on smaller displays
but im super stoked on how these came out
Post by: DanielT on Mon, 04 May 2015, 07:45:32
Post by: ghostjuggernaut on Mon, 04 May 2015, 07:47:35
Post by: BunnyLake on Mon, 04 May 2015, 07:51:47
once they are on hand, ill get all the remaining pcb only orders, plus pcb and case orders out right away, then email everyone who ordered a custom build to confirm how they want it made, i know its been some time coming so tastes may have changed etc
Post by: DanielT on Mon, 04 May 2015, 08:02:20
Post by: Ngt on Mon, 04 May 2015, 10:13:32
soooooooooo excited to finally be able to share these picsGreat pictures! It is exactly as I pictured it would be. Is it the same color as a silver Nerd NS 60?Show Image(http://i.imgur.com/TAMp6qz.jpg)Show Image(http://i.imgur.com/PNYv9d3.jpg)
just realised the pics are pretty large and arent scaling well on smaller displays
but im super stoked on how these came out
Damn if only I was in need of a case when the sale was on. Will there still be a case as a giveaway or sale?
Post by: henz on Mon, 04 May 2015, 13:31:28
Post by: asdfjkl36 on Mon, 04 May 2015, 15:00:20
Hope to snag an extra, if any
Post by: BunnyLake on Thu, 07 May 2015, 09:33:26
he is sending the pcbs in a separate box, and said i should have tracking for that in a couple days
Post by: baldgye on Thu, 07 May 2015, 09:34:37
soooooooooo excited to finally be able to share these picsShow Image(http://i.imgur.com/TAMp6qz.jpg)Show Image(http://i.imgur.com/PNYv9d3.jpg)
just realised the pics are pretty large and arent scaling well on smaller displays
but im super stoked on how these came out
****, now I wish I had ordered one when I had the chance
Post by: DanielT on Thu, 07 May 2015, 09:41:39
got tracking from gon on the casesCan't wait for that PCB :) After building my Alps 60% today I'm craving for the next build :cool:
he is sending the pcbs in a separate box, and said i should have tracking for that in a couple days
Post by: Joey Quinn on Thu, 07 May 2015, 22:44:24
soooooooooo excited to finally be able to share these picsShow Image(http://i.imgur.com/TAMp6qz.jpg)Show Image(http://i.imgur.com/PNYv9d3.jpg)
just realised the pics are pretty large and arent scaling well on smaller displays
but im super stoked on how these came out
****, now I wish I had ordered one when I had the chance
Someone please tell me why I didn't buy one. :confused:
Post by: BunnyLake on Mon, 11 May 2015, 13:01:08
Post by: Ngt on Mon, 11 May 2015, 13:04:00
cases have arrived in the uk and cleared customs, meaning ill either have these on hand tomorrow morning or wednesday, as soon as i have them ill get some nice pics taken and post them here
(http://i2.kym-cdn.com/photos/images/original/000/678/593/8c9.gif) (http://i2.kym-cdn.com/photos/images/original/000/678/593/8c9.gif)
Post by: BunnyLake on Tue, 12 May 2015, 07:22:19
(http://i.imgur.com/wTrYbfj.jpg)
(http://i.imgur.com/7DlxiES.jpg)
(http://i.imgur.com/uJ45WLr.jpg)
(http://i.imgur.com/H9oXlM7.jpg)
(http://i.imgur.com/RjRNBAD.jpg)
Post by: rsadek on Tue, 12 May 2015, 07:26:16
Post by: henz on Tue, 12 May 2015, 07:30:38
Post by: DanielT on Tue, 12 May 2015, 07:38:47
This will look sick with Hyperfuse :cool:
Post by: Ngt on Tue, 12 May 2015, 08:00:31
cases have arrivedShow Image(http://i.imgur.com/wTrYbfj.jpg)Show Image(http://i.imgur.com/7DlxiES.jpg)Show Image(http://i.imgur.com/uJ45WLr.jpg)Show Image(http://i.imgur.com/H9oXlM7.jpg)Show Image(http://i.imgur.com/RjRNBAD.jpg)
Damn that's gorgeous! Poor me missing out this sale. Does it correspond to the silver color that Gon offer for his cases?
Post by: baldgye on Tue, 12 May 2015, 10:52:35
cases have arrivedShow Image(http://i.imgur.com/wTrYbfj.jpg)Show Image(http://i.imgur.com/7DlxiES.jpg)Show Image(http://i.imgur.com/uJ45WLr.jpg)Show Image(http://i.imgur.com/H9oXlM7.jpg)Show Image(http://i.imgur.com/RjRNBAD.jpg)
I was like a week away from placing an order for one of these when the store went down. Managed to convince myself the shape would work and the look of the case would be ballin'
#lifesnotfair #jellyx2
Post by: DanielT on Tue, 12 May 2015, 10:59:35
Post by: trizkut on Tue, 12 May 2015, 11:03:19
cases have arrivedShow Image(http://i.imgur.com/wTrYbfj.jpg)Show Image(http://i.imgur.com/7DlxiES.jpg)Show Image(http://i.imgur.com/uJ45WLr.jpg)Show Image(http://i.imgur.com/H9oXlM7.jpg)Show Image(http://i.imgur.com/RjRNBAD.jpg)
I was like a week away from placing an order for one of these when the store went down. Managed to convince myself the shape would work and the look of the case would be ballin'
#lifesnotfair #jellyx2
Gosh, those are sexy. Sad I didn't join this one.
Post by: Sent on Wed, 13 May 2015, 05:06:46
Post by: E3E on Sun, 17 May 2015, 21:58:48
If anyone is interested in selling their PCB, or rather, has lost interest and wouldn't mind passing the order down to me, I'd be willing to pay for it! Definitely interested in buying a PCB for some building fun!
Post by: DanielT on Tue, 19 May 2015, 12:18:56
Post by: BunnyLake on Tue, 19 May 2015, 12:26:32
Any news on the PCB's :rolleyes:
just waiting on the tracking from gon right now
as always, any time i have info i will of course update here right away
i did send him a chase up message 2 days ago
and i will again later tonight
Post by: elretto on Tue, 26 May 2015, 09:57:56
Post by: BunnyLake on Tue, 26 May 2015, 10:43:37
so you probably haven't heard anything, right? :-[
the second i do ill update here
all the cases have been checked and packed, labels printed, boxes open just waiting for pcbs, as soon as i get a reply from gon with the tracking on the pcbs the very next thing ill do is post here
i know he has them ive seen the pics from when he was soldering on the controllers, when he gave me the tracking on the cases he said he would have them sent out within a week, we are a little past that now, ill chase him up again on skype tonight
Post by: elretto on Tue, 26 May 2015, 15:34:41
Post by: DanielT on Fri, 12 June 2015, 14:29:10
Post by: BunnyLake on Fri, 12 June 2015, 14:35:39
Still nothing ?
not from gon sadly no, cody has his phone number ill get him to give him a call
Post by: DanielT on Fri, 12 June 2015, 14:40:34
Post by: BunnyLake on Fri, 12 June 2015, 15:04:36
I hope GON it's OK with the MERS outbreak in Korea :(
yeah i have tried numerous times to contact him at this point
there is nothing to worry about, gon is a straight up guy, just frustrating we have all the cases here and we are just waiting on the pcbs which i know for a fact were made and are finished
but as always, as soon as i hear anything, ill post here
Post by: heedpantsnow on Fri, 12 June 2015, 19:27:16
I hope GON it's OK with the MERS outbreak in Korea :(
I was in mainland China during SARS. Global pandemics are nothing to sneeze at (gosh that was a poor choice of words
). Praying for GON and the other Korean members of the community.
Post by: codyeatworld on Fri, 12 June 2015, 21:27:55
He is soldering the final pcbs now and told me they will be going out on Wednesday next week.
He also sent me this picture.
(http://i.imgur.com/ZxFK7Ww.png)
Post by: iamtootallforthis on Fri, 12 June 2015, 21:36:20
I just talked to GON, he is okay, just very busy.
He is soldering the final pcbs now and told me they will be going out on Wednesday next week.
He also sent me this picture.Show Image(http://i.imgur.com/ZxFK7Ww.png)
Those are so great looking PCBs!
Post by: DanielT on Fri, 12 June 2015, 22:52:03
I know GON is a straight up guy, I never doubted him :thumb: Seeing all the news with the stuff going on in Koreea got me worried, but I happy to hear he is fine and in good health, this is what is important.
Post by: Sent on Sat, 13 June 2015, 23:51:05
Post by: FreeChemicals on Wed, 17 June 2015, 06:03:01
Are there any spare PCBs ? :-[
Post by: braidn on Fri, 19 June 2015, 19:21:26
Post by: BunnyLake on Fri, 26 June 2015, 05:42:27
Post by: DanielT on Fri, 26 June 2015, 05:47:38
Post by: BunnyLake on Fri, 26 June 2015, 06:04:33
"Please tell the GB joiners and GH members that I feel so sorry for this terrible delay... I think I need to hire someone who can help me packing shipments. ;( The problem here is... it's not easy who has sufficient English skill needed for this work...."
and i would like to add, although there have been delays, i cant speak highly enough of gon, whenever i do get to speak to him he is always incredibly helpful, and takes great pride in his work, im over the moon with the results, and looking forward to working with him more in the future
Post by: BunnyLake on Fri, 26 June 2015, 06:10:30
(http://i.imgur.com/cXE50Gd.jpg)
(http://i.imgur.com/sg7ESe8.jpg)
Post by: BunnyLake on Fri, 26 June 2015, 06:15:52
(http://i.imgur.com/hhDmBNL.jpg)
(http://i.imgur.com/f14Lo0b.jpg)
Post by: henz on Fri, 26 June 2015, 06:21:18
Post by: DanielT on Fri, 26 June 2015, 06:22:12
I never doubted GON, he is a true artist and I consider myself lucky to own 2 GON NerD60 boards, and now with the [CTRL]ALT 60 there will be 3 :) Maybe one day I will have the funds for a full board built by him and not only PCB's .
I was so happy when GO?N won the DTA award, he deserved it for all his work !
Post by: iamtootallforthis on Fri, 26 June 2015, 06:25:00
special hhkb edition for codyShow Image(http://i.imgur.com/cXE50Gd.jpg)Show Image(http://i.imgur.com/sg7ESe8.jpg)
Holy ****! That is one awesome board! I really want that :eek:
Post by: Sent on Fri, 26 June 2015, 06:27:28
Post by: iamtootallforthis on Fri, 26 June 2015, 06:30:43
One step closer to my purple GON with Hyperfuse...
That is gonna be one hell of a board!
Post by: heedpantsnow on Fri, 26 June 2015, 06:36:08
Seeing Cody's all stealth version makes me wish I had bought a housing too
Post by: asdfjkl36 on Fri, 26 June 2015, 07:24:55
They look so good.
Jealous
Post by: baldgye on Fri, 26 June 2015, 09:03:36
special edition board for SENTShow Image(http://i.imgur.com/hhDmBNL.jpg)Show Image(http://i.imgur.com/f14Lo0b.jpg)
wwwwooooooaaaaaaaaaahhhhhhhhhhhhhhhhh
Post by: mashby on Fri, 26 June 2015, 09:27:50
Post by: BunnyLake on Thu, 02 July 2015, 13:11:46
so all the pcbs and the last couple of cases
its my anniversary weekend so im not gonna really be on gh between now and monday
but ill have all the pcb and case and pcb only orders sent out early next week, and on monday or tuesday, ill message everyone with a custom build to confirm options with them and margo will pick them up from me mid next week
Post by: heedpantsnow on Thu, 02 July 2015, 13:13:56
the last of everything arrived today
so all the pcbs and the last couple of cases
its my anniversary weekend so im not gonna really be on gh between now and monday
but ill have all the pcb and case and pcb only orders sent out early next week, and on monday or tuesday, ill message everyone with a custom build to confirm options with them and margo will pick them up from me mid next week
Awesome. And happy anniversary! Stay off GH bro and enjoy your last anniversary just the two of you!
Post by: BunnyLake on Thu, 02 July 2015, 13:15:28
the last of everything arrived today
so all the pcbs and the last couple of cases
its my anniversary weekend so im not gonna really be on gh between now and monday
but ill have all the pcb and case and pcb only orders sent out early next week, and on monday or tuesday, ill message everyone with a custom build to confirm options with them and margo will pick them up from me mid next week
Awesome. And happy anniversary! Stay off GH bro and enjoy your last anniversary just the two of you!
thanks man, i most certainly will be
so until monday, im basically just gonna pretend gh is still down for me, but just wanted to hop on and let people know this was finally all on hand, and i cant wait to get them out to folks
Post by: Sent on Thu, 02 July 2015, 18:47:03
Post by: nereme on Fri, 03 July 2015, 02:32:02
Post by: Ngt on Fri, 03 July 2015, 02:41:29
Post by: TLSC.wipeOut on Fri, 03 July 2015, 03:27:29
special edition board for SENTShow Image(http://i.imgur.com/hhDmBNL.jpg)Show Image(http://i.imgur.com/f14Lo0b.jpg)
dayummm thats beautiful!
Post by: BunnyLake on Tue, 07 July 2015, 06:55:52
Post by: DanielT on Tue, 07 July 2015, 06:58:16
the majority of these will ship tomorrow, however you may get a shipping notice tonightThis is awesome, with some luck I will get it before 20th of July when I leave the country and I can take it with me and build it there :)
Post by: BunnyLake on Tue, 07 July 2015, 08:14:18
the majority of these will ship tomorrow, however you may get a shipping notice tonightThis is awesome, with some luck I will get it before 20th of July when I leave the country and I can take it with me and build it there :)
yours was just a pcb right, if so ill make sure it goes out in the batch tomorrow
Post by: DanielT on Tue, 07 July 2015, 08:28:02
Thanks :thumb:
Post by: BunnyLake on Tue, 07 July 2015, 10:20:04
email notifications have been sent, and they will be dropped off first thing in the morning, im out of time now so ill pack up the remaining 4 tomorrow and have them out most likely on thursday or friday
Post by: BunnyLake on Wed, 08 July 2015, 08:36:58
apart form the 2 people who contacted me yesterday about changes
if you would like a tracking number, please pm me with the post code that is on your order and i can send it to you
the remaining 4 orders who didnt get notifications, i will get those out for you in the next few days
for the custom builds, margo is picking them up from me tonight, he is about to go away for a couple of weeks but ill be getting everything over to him, and he will build them when he is back, at some point in that time i will contact each person with a custom build, to confirm layouts and options with you guys
looking forward to seeing pics from everyone who gets one, i think they came out pretty special
Post by: asdfjkl36 on Wed, 08 July 2015, 08:53:25
So there didn't end up being any extra cases?
Post by: tpc2084 on Wed, 08 July 2015, 09:16:09
Post by: azhdar on Wed, 08 July 2015, 09:41:01
BunnyLake, did you forget about those of use that contacted you months ago about buying one of the spare pcb's? Eight extra boards and one was supposed to be held for me and you would invoice me when they finally showed up? Thanks! Check your PMs from March 2015 timeframe.
I think you'd be better off finding it yourself and quoting it to him in a pm.
Because one month of BunnyLake PMs is hundreds or even thousand of pm
Post by: DanielT on Wed, 08 July 2015, 10:49:32
everyone who got a shipping notification, your package has now been dropped offHi Bunny,
apart form the 2 people who contacted me yesterday about changes
if you would like a tracking number, please pm me with the post code that is on your order and i can send it to you
the remaining 4 orders who didnt get notifications, i will get those out for you in the next few days
for the custom builds, margo is picking them up from me tonight, he is about to go away for a couple of weeks but ill be getting everything over to him, and he will build them when he is back, at some point in that time i will contact each person with a custom build, to confirm layouts and options with you guys
looking forward to seeing pics from everyone who gets one, i think they came out pretty special
I would like the tracking number, I wanted to PM you but I'm blocked by you, old story ... I wouldn't bother you but with my departure it's better to have the tracking.
Thanks
Post by: BunnyLake on Wed, 08 July 2015, 11:17:18
everyone who got a shipping notification, your package has now been dropped offHi Bunny,
apart form the 2 people who contacted me yesterday about changes
if you would like a tracking number, please pm me with the post code that is on your order and i can send it to you
the remaining 4 orders who didnt get notifications, i will get those out for you in the next few days
for the custom builds, margo is picking them up from me tonight, he is about to go away for a couple of weeks but ill be getting everything over to him, and he will build them when he is back, at some point in that time i will contact each person with a custom build, to confirm layouts and options with you guys
looking forward to seeing pics from everyone who gets one, i think they came out pretty special
I would like the tracking number, I wanted to PM you but I'm blocked by you, old story ... I wouldn't bother you but with my departure it's better to have the tracking.
Thanks
rn209120686gb
there is tracking sir
as for the blocking, although i cant remember why i blocked you, i do end up blocking a lot of people, not because i dont wanna communicate with them, but at some point maybe they said something i felt was negative or annoyed me in some way, so i just block em so if im having a bad day i dont see the comment, but if im not having a bad day i can just click view comment, my block list has nothing to do with who i do and do not like
that sounds kinda silly out loud, but basically i just block people to make reading the board a little more enjoyable sometimes, but next time im on my block list ill try remember to remove you from it, and if you ever need to contact me privately, i never block anyone from my email, which you can get to by hitting contact on ctrlalt.io
Post by: BunnyLake on Wed, 08 July 2015, 11:17:38
BunnyLake, did you forget about those of use that contacted you months ago about buying one of the spare pcb's? Eight extra boards and one was supposed to be held for me and you would invoice me when they finally showed up? Thanks! Check your PMs from March 2015 timeframe.
ill be sorting those later when i have a bit more time
Post by: DanielT on Wed, 08 July 2015, 12:49:32
Thanks :) I will remember to contact you via ctrlalt.io . As for the block, it was my fault, me and my big mouth a long time ago, I deserved it back then.everyone who got a shipping notification, your package has now been dropped offHi Bunny,
apart form the 2 people who contacted me yesterday about changes
if you would like a tracking number, please pm me with the post code that is on your order and i can send it to you
the remaining 4 orders who didnt get notifications, i will get those out for you in the next few days
for the custom builds, margo is picking them up from me tonight, he is about to go away for a couple of weeks but ill be getting everything over to him, and he will build them when he is back, at some point in that time i will contact each person with a custom build, to confirm layouts and options with you guys
looking forward to seeing pics from everyone who gets one, i think they came out pretty special
I would like the tracking number, I wanted to PM you but I'm blocked by you, old story ... I wouldn't bother you but with my departure it's better to have the tracking.
Thanks
rn209120686gb
there is tracking sir
as for the blocking, although i cant remember why i blocked you, i do end up blocking a lot of people, not because i dont wanna communicate with them, but at some point maybe they said something i felt was negative or annoyed me in some way, so i just block em so if im having a bad day i dont see the comment, but if im not having a bad day i can just click view comment, my block list has nothing to do with who i do and do not like
that sounds kinda silly out loud, but basically i just block people to make reading the board a little more enjoyable sometimes, but next time im on my block list ill try remember to remove you from it, and if you ever need to contact me privately, i never block anyone from my email, which you can get to by hitting contact on ctrlalt.io
Thanks again :)
Post by: BunnyLake on Wed, 08 July 2015, 13:32:25
Thanks :) I will remember to contact you via ctrlalt.io . As for the block, it was my fault, me and my big mouth a long time ago, I deserved it back then.everyone who got a shipping notification, your package has now been dropped offHi Bunny,
apart form the 2 people who contacted me yesterday about changes
if you would like a tracking number, please pm me with the post code that is on your order and i can send it to you
the remaining 4 orders who didnt get notifications, i will get those out for you in the next few days
for the custom builds, margo is picking them up from me tonight, he is about to go away for a couple of weeks but ill be getting everything over to him, and he will build them when he is back, at some point in that time i will contact each person with a custom build, to confirm layouts and options with you guys
looking forward to seeing pics from everyone who gets one, i think they came out pretty special
I would like the tracking number, I wanted to PM you but I'm blocked by you, old story ... I wouldn't bother you but with my departure it's better to have the tracking.
Thanks
rn209120686gb
there is tracking sir
as for the blocking, although i cant remember why i blocked you, i do end up blocking a lot of people, not because i dont wanna communicate with them, but at some point maybe they said something i felt was negative or annoyed me in some way, so i just block em so if im having a bad day i dont see the comment, but if im not having a bad day i can just click view comment, my block list has nothing to do with who i do and do not like
that sounds kinda silly out loud, but basically i just block people to make reading the board a little more enjoyable sometimes, but next time im on my block list ill try remember to remove you from it, and if you ever need to contact me privately, i never block anyone from my email, which you can get to by hitting contact on ctrlalt.io
Thanks again :)
haha
well whatever it was
i dont remember now sir, so time heals all wounds
Post by: ccarlitos2 on Wed, 08 July 2015, 13:34:57
special edition board for SENTShow Image(http://i.imgur.com/hhDmBNL.jpg)Show Image(http://i.imgur.com/f14Lo0b.jpg)
All. that. Purple. Holy ****. It is beautiful.
Post by: Zentaaa on Thu, 09 July 2015, 04:57:43
Post by: BunnyLake on Fri, 10 July 2015, 09:19:59
jsut the custom builds to go, of which there is only a handful, margo should be able to crank them out all at once when he gets back from his trip, and ill be confirming those builds with everyone shortly
Post by: Joey Quinn on Fri, 10 July 2015, 10:07:30
special edition board for SENTShow Image(http://i.imgur.com/hhDmBNL.jpg)Show Image(http://i.imgur.com/f14Lo0b.jpg)
Sent is a lucky man! These boards turned out great.
Post by: DanielT on Thu, 16 July 2015, 11:33:15
Thanks Bunny for the fast delivery!
Post by: E3E on Thu, 16 July 2015, 20:31:55
Post by: henz on Thu, 16 July 2015, 23:56:09
Damn, if only I was into the community when the GB was first ran, I'd have picked up a custom case and PCB! Damn.https://geekhack.org/index.php?topic=59114.0;topicseen (https://geekhack.org/index.php?topic=59114.0;topicseen)
Post by: henz on Sun, 19 July 2015, 16:18:28
Im behind in my building scheduele. Have to order some switches for it, have not decided what to put it int it.
Post by: mashby on Tue, 21 July 2015, 10:39:36
Maybe it was mentioned earlier in the thread, but are there build instructions anywhere for the NERD 60?
Post by: BunnyLake on Tue, 21 July 2015, 11:02:52
Bunny -- keyboard arrived safe-and-sound. Thank you! I hope to build it up this weekend and I'll take plenty of photos.
Maybe it was mentioned earlier in the thread, but are there build instructions anywhere for the NERD 60?
ill have a look around for some or if not ill get some put together, cant wait to see what you do with it sir, looking forward to seeing the first built one here, have to wait a while on mine as margo has been away
Post by: DanielT on Tue, 21 July 2015, 18:13:44
Post by: Ngt on Wed, 22 July 2015, 02:49:52
Post by: henz on Wed, 22 July 2015, 04:06:00
Post by: Ngt on Wed, 22 July 2015, 04:49:40
Post by: Reckthor on Wed, 22 July 2015, 15:49:57
Also I'd like to admit the i thought the feet were a bro before opening
:-[
(http://i.imgur.com/SIAN8Wh.jpg)
(http://i.imgur.com/3lYDy8X.jpg)
Post by: Ngt on Wed, 22 July 2015, 15:57:53
Got mine last week glad to have it here. not going to be able to build for awhile.
Also I'd like to admit the i thought the feet were a bro before opening
:-[Show Image(http://i.imgur.com/SIAN8Wh.jpg)Show Image(http://i.imgur.com/3lYDy8X.jpg)
Damn so nice! I'm jealous. :D
Post by: Blackhawk on Wed, 22 July 2015, 16:16:19
Got mine last week glad to have it here. not going to be able to build for awhile.
Also I'd like to admit the i thought the feet were a bro before opening
:-[Show Image(http://i.imgur.com/SIAN8Wh.jpg)Show Image(http://i.imgur.com/3lYDy8X.jpg)
Those purple bolts are so sexy! :eek:
Post by: ccarlitos2 on Fri, 24 July 2015, 10:41:12
Got mine last week glad to have it here. not going to be able to build for awhile.
Also I'd like to admit the i thought the feet were a bro before opening
:-[Show Image(http://i.imgur.com/SIAN8Wh.jpg)Show Image(http://i.imgur.com/3lYDy8X.jpg)
What build are you going to end up going with???
Post by: DanielT on Tue, 04 August 2015, 15:33:45
Thanks Bunny and the ctrlalt team for this :thumb:
(http://imgur.com/OlYZI9n.jpg)
It the future it will take the Hyperfuse caps ;) and a better case, but for the moment this was all I could carry with me during the move.
Post by: Ngt on Tue, 04 August 2015, 16:26:56
Finished my [CTRL]ALT board, I'm going to take it to work tomorrow :d . After two days o typing on a QWERTZ rubberdome I've had enough :))
Thanks Bunny and the ctrlalt team for this :thumb:Show Image(http://imgur.com/OlYZI9n.jpg)
It the future it will take the Hyperfuse caps ;) and a better case, but for the moment this was all I could carry with me during the move.
At first I was thinking: "But it doesn't look like the GB case", then I remembered you only bought the PCB. :))
Post by: DanielT on Tue, 04 August 2015, 22:40:29
Post by: Ngt on Wed, 05 August 2015, 03:15:17
:)) I wish I had also the case but at that time I was too poor for that :( But I will get a nice case for this one at some point :)
I feel you. That the only reason I didn't join at that time either. :)
Post by: shimmy1996 on Fri, 07 August 2015, 20:06:54
(http://i.imgur.com/SmpVC5O.jpg)
just found that no feet were included though :eek:
Post by: Ngt on Sat, 08 August 2015, 13:58:51
Just opened it today and is that not gorgeous or what!Aren't they supposed to be included?Show Image(http://i.imgur.com/SmpVC5O.jpg)
just found that no feet were included though :eek:
Post by: henz on Sun, 09 August 2015, 13:24:42
(http://i.imgur.com/noBfJ07.jpg)
(http://i.imgur.com/Hf9UzyA.jpg)
Post by: Ngt on Sun, 09 August 2015, 13:55:07
snapped of some potatoes, will post better pictures later when i have time.I'm a bit jealous. Nice board though. ;)Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
Post by: BunnyLake on Sun, 09 August 2015, 15:14:01
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
awesome sir
cant wait to get mine finished
Just opened it today and is that not gorgeous or what!Aren't they supposed to be included?Show Image(http://i.imgur.com/SmpVC5O.jpg)
just found that no feet were included though :eek:
they were indeed, somehow his must have been missed, we spoke via pm and im going to send him another set
Post by: henz on Sun, 09 August 2015, 15:16:26
snapped of some potatoes, will post better pictures later when i have time.I'm a bit jealous. Nice board though. ;)Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
extremely happy with the board, i just noticed thought that my 'y' button does not work, argh gotta disassemble it.
Post by: BunnyLake on Sun, 09 August 2015, 15:18:19
snapped of some potatoes, will post better pictures later when i have time.I'm a bit jealous. Nice board though. ;)Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
extremely happy with the board, i just noticed thought that my 'y' button does not work, argh gotta disassemble it.
is it not registering the letter or not registering the key press?
lemme know if you have any issues
Post by: henz on Mon, 10 August 2015, 00:23:16
snapped of some potatoes, will post better pictures later when i have time.I'm a bit jealous. Nice board though. ;)Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
extremely happy with the board, i just noticed thought that my 'y' button does not work, argh gotta disassemble it.
is it not registering the letter or not registering the key press?
lemme know if you have any issues
Not enough qc from my side, i hade missed soldering a pad :p works like a champ now
.
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
awesome sir
cant wait to get mine finished
Somehow gon 60 feels better than a gon tkl, even though I prefer tkl more in general.
Happy with this gb, the for running! :thumb:
Post by: Sent on Mon, 10 August 2015, 00:52:16
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
Damn. That is quite pretty. :thumb:
Post by: baldgye on Mon, 10 August 2015, 05:09:34
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
damn, I really ****ed up by not getting in on this
Post by: just66in on Mon, 10 August 2015, 06:24:55
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
Damn. That is quite pretty. :thumb:
Hi Sent. Can't wait to see the end result for your special edition board ;D
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
damn, I really ****ed up by not getting in on this
Exactly how I feel looking back at this thread :blank:
Post by: henz on Mon, 10 August 2015, 16:05:03
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
Damn. That is quite pretty. :thumb:
tyty
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
damn, I really ****ed up by not getting in on this
You did! :<
Post by: E3E on Mon, 10 August 2015, 17:10:14
Post by: Ngt on Tue, 11 August 2015, 01:48:06
snapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
damn, I really ****ed up by not getting in on this
[/qumyselfsnapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
Damn. That is quite pretty. :thumb:
Hi Sent. Can't wait to see the end result for your special edition board ;Dsnapped of some potatoes, will post better pictures later when i have time.Show Image(http://i.imgur.com/noBfJ07.jpg)Show Image(http://i.imgur.com/Hf9UzyA.jpg)
damn, I really ****ed up by not getting in on this
Exactly how I feel looking back at this thread :blank:
I feel you both. I wasn't ready for the price tag when it was available. Now I'm ready but it is gone!
Post by: Sent on Tue, 11 August 2015, 02:01:35
Post by: asdfjkl36 on Tue, 11 August 2015, 03:05:43
Post by: Ngt on Tue, 11 August 2015, 03:06:22
I wouldn't be surprised if someone parted with theirs. You guys know how GHers are. :))Well someone already did and it got insta-bought. :)
Post by: braidn on Wed, 12 August 2015, 10:55:08
Post by: Ngt on Wed, 12 August 2015, 16:57:49
Post by: chilldude_22 on Thu, 20 August 2015, 09:31:06
Post by: BunnyLake on Thu, 20 August 2015, 09:33:02
Question for anyone that can answer. I bought my PCB and case off of somebody else (really excited to build it, it's gorgeous), but either the package only came with one screw for the feet or I lost the other one while I was opening the box. Is there any I could get a replacement screw?
they are standard screws that amazon sell, or gon also sells them, but will be cheaper on amazon
Post by: chilldude_22 on Thu, 20 August 2015, 10:05:07
Post by: heedpantsnow on Thu, 20 August 2015, 10:10:29
Oh, awesome. Appreciate it. Now to figure out the size....
I would start with M2 or M3. Let us know what you find out.
Post by: asdfjkl36 on Thu, 20 August 2015, 12:28:17
The case uses M3x12mm
And the feet use M3x8mm
Post by: chilldude_22 on Thu, 20 August 2015, 12:39:09
Post by: Ngt on Thu, 20 August 2015, 14:27:17
Post by: henz on Thu, 20 August 2015, 14:43:21
In case any of you want to let go their order be it case + PCB or only case, I'm ready to take it off your hands gently and I'll give you a kiss on the cheek! What a bargain! :-*
Still no case for you? :) ill pm you if i find one.You should have notifications on classifieds.
Post by: Ngt on Thu, 20 August 2015, 14:52:26
In case any of you want to let go their order be it case + PCB or only case, I'm ready to take it off your hands gently and I'll give you a kiss on the cheek! What a bargain! :-*
Still no case for you? :) ill pm you if i find one.You should have notifications on classifieds.
Some people already send me 2 of these cases being sold but there always have been people quicker than me. I can't spam check the classified too often, I don't have the time for it.
I appreciate that you want to help me, thanks.
Post by: henz on Thu, 20 August 2015, 14:58:20
In case any of you want to let go their order be it case + PCB or only case, I'm ready to take it off your hands gently and I'll give you a kiss on the cheek! What a bargain! :-*
Still no case for you? :) ill pm you if i find one.You should have notifications on classifieds.
Some people already send me 2 of these cases being sold but there always have been people quicker than me. I can't spam check the classified too often, I don't have the time for it.
I appreciate that you want to help me, thanks.
I hear you! good luck in your search of goodness!
Post by: Ngt on Thu, 20 August 2015, 14:59:55
In case any of you want to let go their order be it case + PCB or only case, I'm ready to take it off your hands gently and I'll give you a kiss on the cheek! What a bargain! :-*
Still no case for you? :) ill pm you if i find one.You should have notifications on classifieds.
Some people already send me 2 of these cases being sold but there always have been people quicker than me. I can't spam check the classified too often, I don't have the time for it.
I appreciate that you want to help me, thanks.
I hear you! good luck in your search of goodness!
Hehe thank you. :-*
Post by: LordBadger on Tue, 27 October 2015, 07:47:45
Post by: heedpantsnow on Tue, 27 October 2015, 08:13:27
What's the latest status on the custom builds of these? Not heard anything for a while.
The last I heard (several weeks ago) was that Margo has been out of town with some family issues and has not gotten back in the saddle yet. Not sure if there is anyone else doing some of the work, but that's all I know.
Post by: potatowire on Wed, 28 October 2015, 19:15:37
Post by: Sent on Wed, 28 October 2015, 19:21:09
What's the latest status on the custom builds of these? Not heard anything for a while.
The last I heard (several weeks ago) was that Margo has been out of town with some family issues and has not gotten back in the saddle yet. Not sure if there is anyone else doing some of the work, but that's all I know.
This is my current understanding of the situation, as well.