Post by: pichu23 on Sat, 18 October 2014, 10:06:35
PICTURES
(http://geekhack.org/index.php?action=dlattach;topic=62782.0;attach=77392;image)
(http://geekhack.org/index.php?action=dlattach;topic=62782.0;attach=77390;image)
*
**
Picture credits : GONsKeyboardworks
*The PCB's this round would not be in black.
**Picture above is just for reference
Features about the NerD PCB & link to IC
http://geekhack.org/index.php?topic=63533.0
GB Link : http://www.gonskeyboardworks.com/group-buys/113-white-nerd-60-pcb.html (http://www.gonskeyboardworks.com/group-buys/113-white-nerd-60-pcb.html)
Soldering Options : http://www.gonskeyboardworks.com/customizing-services/114-optional-soldering-for-nerd-60-pcb.html (http://www.gonskeyboardworks.com/customizing-services/114-optional-soldering-for-nerd-60-pcb.html)
Post by: pichu23 on Sat, 18 October 2014, 10:27:02
Please purchase through the link below:
http://www.gonskeyboardworks.com/group-buys/113-white-nerd-60-pcb.html
Soldering options:
http://www.gonskeyboardworks.com/customizing-services/114-optional-soldering-for-nerd-60-pcb.html
Thank you once again for participating :)
Post by: Tiramisuu on Sat, 18 October 2014, 13:30:18
Post by: pichu23 on Sat, 18 October 2014, 14:20:03
cha ching. Will be placing my order on payday.
:thumb: :)
Post by: Jersern on Sat, 18 October 2014, 15:57:04
Post by: pichu23 on Sat, 18 October 2014, 16:06:57
Will this fit in the tex 60% case?
I believe so but I'll ask GON and come back to you.
Cause I've read somewhere that NerD is compatible with most 60% case. Don't take into account if you apply side LEDs of course.
Post by: nebo on Sat, 18 October 2014, 16:54:48
Blue case, white pbc, white switches, blue stickers. I might have the prettiest keyboard in the land when this is done.
Post by: pichu23 on Sat, 18 October 2014, 17:17:30
Missed out on black, got this though so I think I win. :)
Blue case, white pbc, white switches, blue stickers. I might have the prettiest keyboard in the land when this is done.
White pcb is indeed sexy. I got one from sprit as well. Lovely colours ;D
Post by: DanielT on Sun, 19 October 2014, 01:51:18
Post by: Glod on Sun, 19 October 2014, 02:49:04
Will this fit in the tex 60% case?
Yes, I can confirm that, I tested it with tex and vortex cases prior to building my GON HHKB. The Nerd60 fits all poker/pure compatible cases and poker layout plates.
It has the best led options and a superior layout config gui.
Buy this PCB!
Post by: Shiftshape on Sun, 19 October 2014, 06:01:47
Post by: Shacony on Sun, 19 October 2014, 06:43:59
- Are in this shoppinglist(http://i.imgur.com/2cxES37.png (http://i.imgur.com/2cxES37.png)) all the components included that I need to build a complete keyboard (except keycaps) or did I miss anything?
- Do the prices have tax included? (Shipping to Germany for me, do I have to pay additional 19% taxes when the packet arrives?)
- Is there already an expected shipping date?
Sorry for all those questions, it's just the first time I make a diy keyboard and I want to avoid making mistakes as much as possible :) At the moment I'm using a Razer Blackwidow Tournament Edition Stealth, but I really think I'm in need of an upgrade, and this seems like the best option out there for a 60% layout :D
Post by: Karura on Sun, 19 October 2014, 07:34:06
Are resistors for LEDs? Are diodes for the switches?
So which option do I pick if I want to add switches + backlit leds (color of my choice) to a PCB? I don't want side leds.
Post by: DanielT on Sun, 19 October 2014, 08:55:32
You need this customization http://www.gonskeyboardworks.com/customizing-services/114-optional-soldering-for-nerd-60-pcb.html#/7_optional_soldering-diodes_resistors_for_backlight_leds and select from the drop down list Diodes+Resistors for Backlight
Post by: Jersern on Sun, 19 October 2014, 09:53:49
Will this fit in the tex 60% case?
Yes, I can confirm that, I tested it with tex and vortex cases prior to building my GON HHKB. The Nerd60 fits all poker/pure compatible cases and poker layout plates.
It has the best led options and a superior layout config gui.
Buy this PCB!
Yay sounds good! I'll give it a few days to wait for a paycheck haha :)
Post by: pichu23 on Sun, 19 October 2014, 11:27:48
Any final date for taking orders? Should probably wait for payday before I splurge more on toys. :)
Nope. Not for now. But I guess it's up to GON to close when he receives enough orders. I too am waiting for awhile before ordering :))
Post by: pichu23 on Sun, 19 October 2014, 11:31:28
Hi, I'm kinda new to this GroupBuy stuff and brought some questions:
- Are in this shoppinglist(http://i.imgur.com/2cxES37.png (http://i.imgur.com/2cxES37.png)) all the components included that I need to build a complete keyboard (except keycaps) or did I miss anything?
- Do the prices have tax included? (Shipping to Germany for me, do I have to pay additional 19% taxes when the packet arrives?)
- Is there already an expected shipping date?
Sorry for all those questions, it's just the first time I make a diy keyboard and I want to avoid making mistakes as much as possible :) At the moment I'm using a Razer Blackwidow Tournament Edition Stealth, but I really think I'm in need of an upgrade, and this seems like the best option out there for a 60% layout :D
Hiya, I'm not sure bout the tax.
It might be taxable when it reaches Germany though but that's on the German side.
Yes, I think the parts are correct. :)
Post by: DanielT on Sun, 19 October 2014, 12:18:17
Shopping list is OK :)
Post by: awhitedev on Sun, 19 October 2014, 15:33:17
Post by: pichu23 on Sun, 19 October 2014, 15:43:44
This looks really cool but holy crap shipping is expensive! :eek:
Not sure how much shipping is to the US. Maybe if there are a couple of US peeps joining this, you might be able to share shipping. ;D
Post by: cjhard on Sun, 19 October 2014, 16:40:23
Post by: eosph on Sun, 19 October 2014, 16:42:00
Can't wait to build my dream keyboard!
Post by: DanielT on Sun, 19 October 2014, 23:26:45
Post by: Karura on Sun, 19 October 2014, 23:28:25
Just wondering, does anyone actually know where the sidelit LEDs are located, and how many LEDs are there? It's a lot of money for it, and I was thinking of maybe getting an aluminum flating case, not sure if it would benefit from it.
Post by: DanielT on Sun, 19 October 2014, 23:33:49
Post by: Karura on Sun, 19 October 2014, 23:35:33
I thought it would be like.. 2 tiny LEDs on the left and right side of the case.
Thinking of maybe going with a case like this. You think it'll benefit from it?
(http://cdn.shopify.com/s/files/1/0651/0379/products/unnamed_grande.jpg?v=1413273295)
Also I am wondering, he doesn't specify LED color, I guess the colour will be white or something.
Post by: DanielT on Mon, 20 October 2014, 01:20:32
That case is beautyful but you will not se much of the side lights, the best choice is either a GON case with polycarb frosted middle layer or something like Sprit acryl cases.
With a solid case you will see only some light at the edges of the case, not much.
I will come back with the details for the side LED's when I get on my computer at work, from my mobile it's too cumbersome :(
Post by: DanielT on Mon, 20 October 2014, 01:58:53
[attachimg=1]
Post by: Karura on Mon, 20 October 2014, 02:55:37
Post by: DanielT on Mon, 20 October 2014, 03:12:22
Post by: kitsun8 on Mon, 20 October 2014, 05:20:29
You're welcome :cool: At a first look the customization fee sounds bit steep, but I can tell you one thing, GON is an artist, the soldering on my Black NerD60 is amazing, I couldn't believe it was done all manually. GON has a video where you can see how complex this process actually is.gday mate have you bought a PCB yet? :cool:
Post by: DanielT on Mon, 20 October 2014, 06:33:05
gday mate have you bought a PCB yet? :cool:No, not yet, I'm broke, like really broke :-[ I have to wait for the paycheck or to sell something that is not my kidney :p
Post by: spenghammer on Mon, 20 October 2014, 16:40:50
Post by: p3lim on Mon, 20 October 2014, 17:15:08
I tried emailing him, but all I got was advertisement for his GUI (which is nice and all but useless for me).
Was kinda hoping this could be an alternate for the GH60, sadly it doesn't seem like it.
Post by: Karura on Mon, 20 October 2014, 17:16:31
Snagged a black pcb for me in the last group buy. Just now snagged a white one for the lady. She doesn't know it yet, but she needs this in her life. haha
Nice excuse... :D
Lady: "Why do you have all these keyboards??"
spenghammer: "It's for you!!! Don't you see?"
Post by: Barracuda on Mon, 20 October 2014, 21:21:25
Post by: spenghammer on Mon, 20 October 2014, 22:57:08
"You know it's true, everything I do, I do it for you."Snagged a black pcb for me in the last group buy. Just now snagged a white one for the lady. She doesn't know it yet, but she needs this in her life. haha
Nice excuse... :D
Lady: "Why do you have all these keyboards??"
spenghammer: "It's for you!!! Don't you see?"
*camera zooms in on a sexy and complete Gon white pcb build enshrined in a clear Gon case with pink leds and white key caps glowing softly in a fine dramatic mist...a slightly out of focus but visibly ecstatic wife can be seen in the background swooning over her keyboard...that special thing that completely and utterly symbolizes her husband's love for her...fade to black....
lol
Post by: Karura on Tue, 21 October 2014, 02:28:36
Almost ready to order :D
Post by: Karura on Tue, 21 October 2014, 02:29:11
:thumb:"You know it's true, everything I do, I do it for you."Snagged a black pcb for me in the last group buy. Just now snagged a white one for the lady. She doesn't know it yet, but she needs this in her life. haha
Nice excuse... :D
Lady: "Why do you have all these keyboards??"
spenghammer: "It's for you!!! Don't you see?"
*camera zooms in on a sexy and complete Gon white pcb build enshrined in a clear Gon case with pink leds and white key caps glowing softly in a fine dramatic mist...a slightly out of focus but visibly ecstatic wife can be seen in the background swooning over her keyboard...that special thing that completely and utterly symbolizes her husband's love for her...fade to black....
Post by: Karura on Tue, 21 October 2014, 02:29:58
gday mate have you bought a PCB yet? :cool:No, not yet, I'm broke, like really broke :-[ I have to wait for the paycheck or to sell something that is not my kidney :p
For teaching me so much, I'm willing to spot you $5 :)
Post by: DanielT on Tue, 21 October 2014, 06:26:39
Wait, so the side LEDs are actually on the underside of the PCB? So with a solid case, it wouldn't even benefit it a little? I thought it was on the top!Yep the side LED's are under the PCB, for the upper side you have the normal back light LED's and in that case it works fine with a low profile solid alu case.
Almost ready to order :D
For the normal backlight you have to chose Diodes+Resistors for Backlight LED's.
For teaching me so much, I'm willing to spot you $5 :)That is so nice of you ;) It was my pleasure, GON makes some amazing boards, and it would be a shame to miss out the opportunity to get one just because some bits and pieces of information are to clear :thumb:
I will see in a week what funds I have available when I cash my paycheck
Post by: kitsun8 on Fri, 24 October 2014, 03:14:24
hey hey don't forget about me shouting 5 bucks as well. My bribe didn't go wasted :pWait, so the side LEDs are actually on the underside of the PCB? So with a solid case, it wouldn't even benefit it a little? I thought it was on the top!Yep the side LED's are under the PCB, for the upper side you have the normal back light LED's and in that case it works fine with a low profile solid alu case.
Almost ready to order :D
For the normal backlight you have to chose Diodes+Resistors for Backlight LED's.For teaching me so much, I'm willing to spot you $5 :)That is so nice of you ;) It was my pleasure, GON makes some amazing boards, and it would be a shame to miss out the opportunity to get one just because some bits and pieces of information are to clear :thumb:
I will see in a week what funds I have available when I cash my paycheck
Post by: spenghammer on Fri, 24 October 2014, 09:04:00
Post by: pichu23 on Fri, 24 October 2014, 09:06:51
So Gon, what's the count up to??
I'm not GON but I think a few people are waiting for funds to arrive. So there will/might be a few orders later this month. :)
Post by: spenghammer on Fri, 24 October 2014, 09:08:09
That's what credit cards are for. Instant gratification! Just kidding :pSo Gon, what's the count up to??
I'm not GON but I think a few people are waiting for funds to arrive. So there will/might be a few orders later this month. :)
Post by: pichu23 on Fri, 24 October 2014, 09:10:03
That's what credit cards are for. Instant gratification! Just kidding :pSo Gon, what's the count up to??
I'm not GON but I think a few people are waiting for funds to arrive. So there will/might be a few orders later this month. :)
Lol! I'm a student, can't use that credit card other than emergencies. :p
Post by: spenghammer on Fri, 24 October 2014, 09:18:41
I feel ya! Smart move. Credit cards will certainly crush your life/back account down the road. What feels good now won't feel good later...That's what credit cards are for. Instant gratification! Just kidding :pSo Gon, what's the count up to??
I'm not GON but I think a few people are waiting for funds to arrive. So there will/might be a few orders later this month. :)
Lol! I'm a student, can't use that credit card other than emergencies. :p
But...but...sexy white pcb! Haha
Post by: eosph on Mon, 27 October 2014, 10:01:39
Post by: DanielT on Mon, 27 October 2014, 11:40:06
I can't wait to get my hands on this, does anyone have a list of what stabilisers I'd need for a standard ISO PCB mounted layout?You need
1 small stab for ISO Return
1 small stab for Backspace
1 small stab for Right Shift (if you use the standard 2.75u SHIFT )
1 space bar stab (7u or 6.25u depending on what you want on the bottom row)
And I still don't have the money for this, need to sell more stuff :(
Post by: Sygaldry on Mon, 27 October 2014, 12:34:54
If so I'm good for one and a plate!
Post by: eosph on Mon, 27 October 2014, 18:24:07
I can't wait to get my hands on this, does anyone have a list of what stabilisers I'd need for a standard ISO PCB mounted layout?You need
1 small stab for ISO Return
1 small stab for Backspace
1 small stab for Right Shift (if you use the standard 2.75u SHIFT )
1 space bar stab (7u or 6.25u depending on what you want on the bottom row)
And I still don't have the money for this, need to sell more stuff :(
For space bar I'm just going to use a standard one found on Ducky Shine 3 and Poker 2, is that 7u?
Post by: Moralless on Mon, 27 October 2014, 18:28:10
I can't wait to get my hands on this, does anyone have a list of what stabilisers I'd need for a standard ISO PCB mounted layout?You need
1 small stab for ISO Return
1 small stab for Backspace
1 small stab for Right Shift (if you use the standard 2.75u SHIFT )
1 space bar stab (7u or 6.25u depending on what you want on the bottom row)
And I still don't have the money for this, need to sell more stuff :(
For space bar I'm just going to use a standard one found on Ducky Shine 3 and Poker 2, is that 7u?
Ducky and Poker 2 uses 6.25u spacebars.
Post by: eosph on Mon, 27 October 2014, 18:37:31
I can't wait to get my hands on this, does anyone have a list of what stabilisers I'd need for a standard ISO PCB mounted layout?You need
1 small stab for ISO Return
1 small stab for Backspace
1 small stab for Right Shift (if you use the standard 2.75u SHIFT )
1 space bar stab (7u or 6.25u depending on what you want on the bottom row)
And I still don't have the money for this, need to sell more stuff :(
For space bar I'm just going to use a standard one found on Ducky Shine 3 and Poker 2, is that 7u?
Ducky and Poker 2 uses 6.25u spacebars.
Great thanks!
Post by: Karura on Mon, 27 October 2014, 19:02:34
I kinda want two boards, but WOW the price :D
Also, what are the chances of GON releasing a newer version of this board in the near future, such as an updated version with wireless? Maybe I should just get one for now...
Post by: eosph on Mon, 27 October 2014, 19:54:22
Man, is anyone getting two of these decked out with diodes, resistors, and side LEDs?
I kinda want two boards, but WOW the price :D
Also, what are the chances of GON releasing a newer version of this board in the near future, such as an updated version with wireless? Maybe I should just get one for now...
I went for the full works, I've spent enough on imperfect keyboards and this offers me the most flexibility right now. Long story short, just do it :P
Post by: Karura on Mon, 27 October 2014, 19:55:37
Man, is anyone getting two of these decked out with diodes, resistors, and side LEDs?
I kinda want two boards, but WOW the price :D
Also, what are the chances of GON releasing a newer version of this board in the near future, such as an updated version with wireless? Maybe I should just get one for now...
I went for the full works, I've spent enough on imperfect keyboards and this offers me the most flexibility right now. Long story short, just do it :P
I know, but two boards? :D I can do one, but I think two = gg
Post by: eosph on Mon, 27 October 2014, 20:06:37
Man, is anyone getting two of these decked out with diodes, resistors, and side LEDs?
I kinda want two boards, but WOW the price :D
Also, what are the chances of GON releasing a newer version of this board in the near future, such as an updated version with wireless? Maybe I should just get one for now...
I went for the full works, I've spent enough on imperfect keyboards and this offers me the most flexibility right now. Long story short, just do it :P
I know, but two boards? :D I can do one, but I think two = gg
Only 2??? This will be my 4th mech keyboard not counting the many other horrible rubber dome keyboards I've had over the years ;)
Post by: Karura on Mon, 27 October 2014, 20:07:51
Man, is anyone getting two of these decked out with diodes, resistors, and side LEDs?
I kinda want two boards, but WOW the price :D
Also, what are the chances of GON releasing a newer version of this board in the near future, such as an updated version with wireless? Maybe I should just get one for now...
I went for the full works, I've spent enough on imperfect keyboards and this offers me the most flexibility right now. Long story short, just do it :P
I know, but two boards? :D I can do one, but I think two = gg
Only 2??? This will be my 4th mech keyboard not counting the many other horrible rubber dome keyboards I've had over the years ;)
I meant.. I already have 4 keyboards, and I was thinking of getting two of these PCBs for TWO MORE boards -_-
Post by: Tiramisuu on Mon, 27 October 2014, 20:30:10
Post by: findingthelimit on Sat, 01 November 2014, 11:01:17
If so, I have a few questions...
1. Do I need to buy a plate for the board? Where they specified parts I need to build a board, they didn't say I need one either. If this helps, I'm thinking of getting the acrylic case.
i.e. do i need this : http://www.gonskeyboardworks.com/housings-and-related-parts/17-universal-frameplate-for-60.html
if i'm building with this? http://www.gonskeyboardworks.com/housings-and-related-parts/103-acrylic-housing-for-nerd-60.html#/countersink-no_fastening_with_button_head_bolts
Also, it doesn't say whether the bottom row allows for 1.5 - 1 - 1.5 - 7 - 1.5 - 1 - 1.5, or I have to go winkeyless without the 1x winkey?
2. What's the difference between buying "tuned" switches from GON and buying regular ones off of other vendors?
3. How many stabilizers do I need? Regular 2x backspace, 2.75 right shift, 1.5,1,1.5,7,1.5,1,1.5 bottom row.
My guess is I need 5 for backspace, enter, 2x shift, and spacebar. Please correct me if I'm wrong.
4. How many diodes for DIP do I need? Do they corresponding 1 to 1 to the backlight LEDs?
5. Thanks for taking the time and reading through my questions. This will be my first build ever, and I'm very excited for it.
Post by: DanielT on Sat, 01 November 2014, 11:22:28
2. GON tunned switches are stock switches that GON will modify to fit you best, change springs, lubing, stickers, this way the feeling and typing experience is improved. Now which type of tunning to choose is more complicated :) it is a personal choice.
3. For stabs you need 4 small ones for Backspace, RShift, LShift and return and 1 7u for the spacebar. The stabs must be Cherry PCB mount, these are the only supported by GON's cases and plates.
4. DIP diodes are for the switches and you need around 70pcs. For the LED's you need SMD resistors also around 70pcs.
Post by: Karura on Sat, 01 November 2014, 11:44:26
Still haven't ordered but I really want to soon, just trying to figure out what colour LEDs to get.
I have three questions:
1) Do you guys know what colour of LED is this one? It looks orange to me, but .. also very red
(http://longzilla.files.wordpress.com/2014/02/orange_v02.jpg)
2) Does anyone have pictures of the GON Side-LED in Orange?
I'm guessing that it doesn't match the LEDs in 1) because that one is very red.
Decisions :D
Post by: Sygaldry on Sat, 01 November 2014, 11:56:09
I'm not sure which switches I should be purchasing for this board, especially since GON's website only offers the PCB mount Clears.
Post by: DanielT on Sat, 01 November 2014, 12:32:11
Switches are something personal, I like MX Reds or Blacks with 50g springs.
Some love the MX Clear with 62g springs. Switches are a long story.
Post by: findingthelimit on Sat, 01 November 2014, 13:06:53
for the acrylic housing listed here:
http://www.gonskeyboardworks.com/housings-and-related-parts/103-acrylic-housing-for-nerd-60.html#/countersink-no_fastening_with_button_head_bolts
1. What is a countersink? Are there pictures to illustrate them?
2. when you select the color of the top, frame, mid, and bottom of the case, am I selecting the color of the LEDs, or the color of the acrylic casing? I'd like the acrylic to be clear, with colored side LEDs. If they are for the side LEDs, After I put everything together, am I allowed to change the LED color using the NerD GUI, or am I stuck with those colors for this case?
Sorry, thought I was done with questions, but more keep creeping up!
Post by: DanielT on Sat, 01 November 2014, 13:29:16
2. You chose the colors for the case layers, it doesn't have anything to do with the LED's.
You ca not change the LED color from the GUI, I don't think this board supports RGB LED's. You chose a color for the LED's and stick with it.
Post by: henz on Sun, 02 November 2014, 14:09:35
Post by: pichu23 on Sun, 02 November 2014, 14:14:42
Just ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
niceeeee. I'm using the sprit's 60% pcb and I've picked white. I'm using a acrylic plate though and every time I look down it's really pretty. I think a silver plate might be nice as well :)
Post by: findingthelimit on Sun, 02 November 2014, 14:14:55
Just ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
Post by: pichu23 on Sun, 02 November 2014, 14:15:46
Just ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
That's if you buy the case from GON. Some people might just get the pcb and do smth else with it ;D
Post by: henz on Sun, 02 November 2014, 14:25:47
The caseJust ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
https://www.massdrop.com/buy/tex-acrylic-cnc-keyboard-case?mode=guest_open
Im going with white smd leds and white in switch leds, also ordered white pbt/pom caps from the vortex buy :D Going to call it the white light >_<(The imagination on that one is over 9000)
Post by: pichu23 on Sun, 02 November 2014, 14:38:18
The caseJust ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
https://www.massdrop.com/buy/tex-acrylic-cnc-keyboard-case?mode=guest_open
Im going with white smd leds and white in switch leds, also ordered white pbt/pom caps from the vortex buy :D Going to call it the white light >_<(The imagination on that one is over 9000)
nice choice of the case. I would have gotten that if I have no use of my alu case. The colour would be awesome with the leds switched on ! :thumb:
Post by: henz on Sun, 02 November 2014, 14:49:23
The caseJust ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
https://www.massdrop.com/buy/tex-acrylic-cnc-keyboard-case?mode=guest_open
Im going with white smd leds and white in switch leds, also ordered white pbt/pom caps from the vortex buy :D Going to call it the white light >_<(The imagination on that one is over 9000)
nice choice of the case. I would have gotten that if I have no use of my alu case. The colour would be awesome with the leds switched on ! :thumb:
tanx. ! hope its dope :) Gonna spend whole winter soldering though as i also have a bunch of other stuff getting in soon :P
Question Similar to this:
Will the Universal Plate work with PCB mounted switches (I noticed it only works with Cherry PCB mount stabilizers).
I'm not sure which switches I should be purchasing for this board, especially since GON's website only offers the PCB mount Clears.
i know the PCB mounted switches will work.(and i would prefer it) but isnt it a necessity on the places where the switch is not supported by the sides? Like caps, left/right shift, enter, backspace?
Post by: Karura on Fri, 07 November 2014, 03:45:23
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Post by: kitsun8 on Fri, 07 November 2014, 07:03:42
The caseJust ordered a white one. Gonna use it with a white see through acrylic case and a silver plate :) gonna be niiice!
I thought you don't need a plate because it's included within the acrylic case?
What color LEDs are you picking? :]
https://www.massdrop.com/buy/tex-acrylic-cnc-keyboard-case?mode=guest_open
Im going with white smd leds and white in switch leds, also ordered white pbt/pom caps from the vortex buy :D Going to call it the white light >_<(The imagination on that one is over 9000)
I'm planning to use that case for mine aswell! except I'm not going to have LEDs this time because I'm too lazy to solder them :p Also I plan on taking it around with me everywhere and I hate attracting looks from strangers :))
Post by: pichu23 on Fri, 07 November 2014, 07:56:47
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Yes, I just saw that as well. But I think I'll be going for the usb option. Not too sure about the wireless signal, maybe you could pm GON himself.
I myself have not put in an order yet. :( Really need to do it soon.
Post by: Sygaldry on Fri, 07 November 2014, 10:13:30
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
I've asked GON about the fit in non-GON cases and he told me that there are no fit problems (at least with the Vortex Cast Aluminum Case - which is a super picky case). I'd assume any other 60% case made for a Poker should be perfect.
I would also like to know if a metal case would interfere with the wireless. Wouldn't want to pay the extra 50 bucks to find out that the functionality doesn't work! If it will work with full metal cases, I think I may just opt for the wireless.
Post by: pichu23 on Fri, 07 November 2014, 10:41:34
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
I've asked GON about the fit in non-GON cases and he told me that there are no fit problems (at least with the Vortex Cast Aluminum Case - which is a super picky case). I'd assume any other 60% case made for a Poker should be perfect.
I would also like to know if a metal case would interfere with the wireless. Wouldn't want to pay the extra 50 bucks to find out that the functionality doesn't work! If it will work with full metal cases, I think I may just opt for the wireless.
I don't think so but for his mobik gb the case wasn't metal, so that' might be the case. (interference)
yep, i'm gonna use the vortex alu case to pair along with this. should be fine if i'm using usb. :)
Post by: Sygaldry on Fri, 07 November 2014, 11:26:17
i'm gonna use the vortex alu case to pair along with this. should be fine if i'm using usb. :)Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
I've asked GON about the fit in non-GON cases and he told me that there are no fit problems (at least with the Vortex Cast Aluminum Case - which is a super picky case). I'd assume any other 60% case made for a Poker should be perfect.
I would also like to know if a metal case would interfere with the wireless. Wouldn't want to pay the extra 50 bucks to find out that the functionality doesn't work! If it will work with full metal cases, I think I may just opt for the wireless.
It looks like we'll end up with very, very similar keyboards then!
Post by: pichu23 on Fri, 07 November 2014, 11:36:01
More
i'm gonna use the vortex alu case to pair along with this. should be fine if i'm using usb. :)Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
I've asked GON about the fit in non-GON cases and he told me that there are no fit problems (at least with the Vortex Cast Aluminum Case - which is a super picky case). I'd assume any other 60% case made for a Poker should be perfect.
I would also like to know if a metal case would interfere with the wireless. Wouldn't want to pay the extra 50 bucks to find out that the functionality doesn't work! If it will work with full metal cases, I think I may just opt for the wireless.
It looks like we'll end up with very, very similar keyboards then!
yeah, I've had this alu case as I was one of the 1st batches. its a really nice case. black as well. haha. gonna look pretty sick on it.
Post by: Shiftshape on Fri, 07 November 2014, 15:09:17
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Actually came here to ask the same thing! Is it even the same GB?
I'm pretty sure Gon himself says metal cases will interfere though. However I'm not quite sure about what other magic he's workes into v2. :)
Post by: pichu23 on Fri, 07 November 2014, 15:16:27
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Actually came here to ask the same thing! Is it even the same GB?
I'm pretty sure Gon himself says metal cases will interfere though. However I'm not quite sure about what other magic he's workes into v2. :)
Well in the IC I mentioned he might do a v2 revision for this board so yeah. :D
The metal might interfere, not sure. I'll ask GON when I'm free later :)
Post by: Karura on Fri, 07 November 2014, 19:28:47
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
I've asked GON about the fit in non-GON cases and he told me that there are no fit problems (at least with the Vortex Cast Aluminum Case - which is a super picky case). I'd assume any other 60% case made for a Poker should be perfect.
I would also like to know if a metal case would interfere with the wireless. Wouldn't want to pay the extra 50 bucks to find out that the functionality doesn't work! If it will work with full metal cases, I think I may just opt for the wireless.
I've asked GON too, and he mentioned that the LIPO battery for the wireless might not fit, and something about the side switches not fitting. Does anyone have pictures of the actual wireless board? That would explain a lot.
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Actually came here to ask the same thing! Is it even the same GB?
I'm pretty sure Gon himself says metal cases will interfere though. However I'm not quite sure about what other magic he's workes into v2. :)
Well in the IC I mentioned he might do a v2 revision for this board so yeah. :D
The metal might interfere, not sure. I'll ask GON when I'm free later :)
Please find out for me :P
I also need to know if it turns out the battery won't fit the case, would it possible to just not attach the battery, and use the board as if it is a USB-only one? Thanks :)
Post by: Sygaldry on Fri, 07 November 2014, 20:02:39
Hey guys, I just noticed that GON updated the GB to offer the WIRELESS option.I'm pretty sure Gon himself says metal cases will interfere though.
I have no idea if this option is any good, would appreciate if anyone knows better:
1) Does this wireless signal work in full metal cases like the Hammer or FMJ cases?
2) How good is this wireless option? If it's something new, I might want to pass on it, but if it's really solid and has been trial/errored enough, and doesn't interfere with fitting in a normal non-GON case, I would consider.
3) Does it actually fit properly in a non-GON 60% case? Would suck if it had clearance issues :P
Hope someone knows better than me!
Makes perfect sense... Faraday cage effect and all that jazz... Kinda like how aluminum cases on phones block signal.
This makes me want to consider the NerD case... but so expensive!!!
Post by: taylordcraig on Sat, 08 November 2014, 09:58:22
The 40% had a wireless or not option, I imagine it would be the same here. [ie; yes you can make just a wired one]
Post by: Sygaldry on Sat, 08 November 2014, 18:38:48
Will this PCB (with Side-LEDs soldered on) fit the TEX acrylic case?
Post by: Ripudio on Sat, 08 November 2014, 18:59:15
Post by: Sygaldry on Sat, 08 November 2014, 19:43:26
The "side" LEDs are on the bottom of the board. Those support bars on TEX cases might get in the way of some of the LEDs.That's what I was trying to figure out =/
I wonder if anyone has tried to fit this PCB with side LEDs in one of those cases
Post by: pichu23 on Sat, 08 November 2014, 19:48:18
The "side" LEDs are on the bottom of the board. Those support bars on TEX cases might get in the way of some of the LEDs.That's what I was trying to figure out =/
I wonder if anyone has tried to fit this PCB with side LEDs in one of those cases
Sorry, I can't help with this. Maybe anyone who has build their r1 pcb's could give a feedback. Not sure. Really sorry :(
Post by: Glod on Sun, 09 November 2014, 00:00:55
I just want to say if you are new to smd soldering, this may not be the best board to learn it on, do some practice on something else first. Smd resistors are tiny also if you do the side leds, the smd leds need to mounted sideways And if you touch the epoxy lens with the iron it obviously will destroy them.
On the other hand if you don't care about leds then it's easy to put together you can use through hole diodes and it's hard to mess that up.
If you can take advantage of GON or some other pro do the smd soldering I highly suggest doing it.
Post by: eosph on Sun, 09 November 2014, 09:16:59
The "side" LEDs are on the bottom of the board. Those support bars on TEX cases might get in the way of some of the LEDs.
I'm planning on putting mine in a tex case, like someone said above it should be ok to do some small mods to the case to get it to fit properly.
Post by: Sygaldry on Sun, 09 November 2014, 12:16:57
GON Acrylic NerD 60(USB/Wireless Combo NOT Supported)
GON NS NerD 60(USB/Wireless Combo NOT Supported)
GON NS NerD Crystal 60(USB/Wireless Combo Supported)
WAIT HOLD ON...
There's a NerD Crystal 60?!
If there is one in the works, I'm waiting for the DIY kit. This would be too good to pass up!
Post by: Karura on Mon, 10 November 2014, 03:35:58
$174.02 USD after PCB, assembly, 1 set of stabilizers, and shipping.
I hope this is worth it!
Post by: henz on Mon, 10 November 2014, 06:12:39
Alright, I finally placed an order... my wallet... :(1 pcb and 2 plates 172$ costs to stay on top >_<
$174.02 USD after PCB, assembly, 1 set of stabilizers, and shipping.
I hope this is worth it!
Post by: phearboner on Thu, 13 November 2014, 14:41:11
Post by: DanielT on Fri, 14 November 2014, 04:48:48
Alright, I finally placed an order... my wallet... :(
$174.02 USD after PCB, assembly, 1 set of stabilizers, and shipping.
I hope this is worth it!
Oh it's worth every penny :thumb: I just finished my black NerD60. The build quality is first class, and the configuration GUI is perfect. Has also locking Fn , it's just perfect.
I'm typing in it right now. After I raise more funds I will get a second one this time I will take also a plate.
And I just have to post this again because this is the perfect board for me:
(http://imgur.com/3LDWzXi.jpg)
Post by: Shiftshape on Sat, 15 November 2014, 11:20:56
Oh it's worth every penny :thumb: I just finished my black NerD60. The build quality is first class, and the configuration GUI is perfect. Has also locking Fn , it's just perfect.
I'm typing in it right now. After I raise more funds I will get a second one this time I will take also a plate.
And I just have to post this again because this is the perfect board for me:Show Image(http://imgur.com/3LDWzXi.jpg)
Oh, and here I thought I was doing a good job of being patient. Really keen to start my build now! :thumb:
Post by: Sygaldry on Sat, 15 November 2014, 12:27:17
(http://i.imgur.com/BNBFGfg.jpg)
:cool:
Post by: Dreamre on Sat, 15 November 2014, 21:16:00
Not from this GB but certainly a NerD 60 PCB:Show Image(http://i.imgur.com/BNBFGfg.jpg)
:cool:
What kind of LEDs are these?!
Edit- Looks like 1.8mm LEDs.
Post by: eosph on Mon, 17 November 2014, 03:28:01
I went with 1 PCB with all the soldiering options fwiw.
Post by: pichu23 on Mon, 17 November 2014, 09:22:39
Got shipping confirmation this morning. Can't wait for it to arrive now.
I went with 1 PCB with all the soldiering options fwiw.
Pictures when it arrives would be awesome ;D
Post by: eosph on Tue, 18 November 2014, 11:36:21
I'll post some pics as soon as it arrives. I don't have any of the parts to build the full keyboard yet though.
Post by: Karura on Tue, 18 November 2014, 15:27:08
Can't wait to get it, except that I still need to find a case and order the plate :P
What cases/plate do you guys plan to use with this?
Post by: pichu23 on Tue, 18 November 2014, 15:29:01
So, mine was shipped a few days ago too.
Can't wait to get it, except that I still need to find a case and order the plate :P
What cases/plate do you guys plan to use with this?
I've yet to order mine :-\
Anyways, was planning to get GON's universal plate but will be using my black vortex alu case. Hopefully it will fit nice ;)
Post by: henz on Tue, 18 November 2014, 15:34:41
So, mine was shipped a few days ago too.
Can't wait to get it, except that I still need to find a case and order the plate :P
What cases/plate do you guys plan to use with this?
tex acrylllic and vortex alu
Post by: spenghammer on Tue, 18 November 2014, 18:16:33
Post by: pichu23 on Tue, 18 November 2014, 18:33:02
Christmas came early today! I think I like this one better than the black one from the previous group buy. Too bad this one is for the wife :p This thing is beautiful!! Pure masterful craftsmanship in the soldering work - but I wouldn't expect anything less from GON :D Thanks again GON! I'll be back for a case and some switches once I save some pennies!
Attaboy. That looks sweet.
Does the purple smds cause any soft of blockages on non gon cases ?
Post by: Karura on Tue, 18 November 2014, 20:12:21
Alright, I finally placed an order... my wallet... :(
$174.02 USD after PCB, assembly, 1 set of stabilizers, and shipping.
I hope this is worth it!
Oh it's worth every penny :thumb: I just finished my black NerD60. The build quality is first class, and the configuration GUI is perfect. Has also locking Fn , it's just perfect.
I'm typing in it right now. After I raise more funds I will get a second one this time I will take also a plate.
And I just have to post this again because this is the perfect board for me:Show Image(http://imgur.com/3LDWzXi.jpg)
Looks sweet, what case is that? Got more pictures of it with LEDs? :D Video would be awesome.
Post by: DanielT on Wed, 19 November 2014, 01:18:46
I don't have any LED's don't care about that, sorry.
Post by: DanielT on Thu, 20 November 2014, 02:59:18
Post by: henz on Thu, 20 November 2014, 03:04:06
Placed my order today for a white GON NerD60 :cool: this time I took also a plate. I will be my first board with a plate so why not start with the best :thumb:
Good choise. I kinda extended my order and got a TKL too >_<
Post by: kitsun8 on Thu, 20 November 2014, 04:18:54
It looks great!
Post by: henz on Thu, 20 November 2014, 07:01:06
Post by: DanielT on Thu, 20 November 2014, 07:19:05
Post by: pichu23 on Thu, 20 November 2014, 08:50:23
Placed my order today for a white GON NerD60 :cool: this time I took also a plate. I will be my first board with a plate so why not start with the best :thumb:
Damn, I really need to place my order soon as well :(
Post by: DanielT on Thu, 20 November 2014, 09:36:09
After I've built the Black Nerd60 board I knew that I have to get a second one.
Post by: pichu23 on Thu, 20 November 2014, 09:52:43
I sold 2 boards and some other stuff to get this one. But this is my last board, I don't need any other boards.
After I've built the Black Nerd60 board I knew that I have to get a second one.
Hmm. Which plate did you get tho ? I was thinking of getting the silver plate. Simple yet nice :)
Post by: DanielT on Thu, 20 November 2014, 09:58:33
But it will be a nice board, with original Cherry WoB caps. So a black board with a white PCB :D
No LED's, don't care for that.
Post by: kekstee on Fri, 21 November 2014, 06:37:48
If I don't care for all the SMD LED options, will it be enough to fit every key with either a diode or a LED? No SMD parts required?
//e and can somebody hint at the shipping costs to an european country? I don't want to create an account just for that.
Post by: eosph on Fri, 21 November 2014, 08:35:26
It's so nice!!!
Sorry if this is a stupid question:
If I don't care for all the SMD LED options, will it be enough to fit every key with either a diode or a LED? No SMD parts required?
//e and can somebody hint at the shipping costs to an european country? I don't want to create an account just for that.
Shipping to the UK for me was $23
Post by: henz on Fri, 21 November 2014, 08:46:26
Sorry if this is a stupid question:a pcb would be 25$ i think.
If I don't care for all the SMD LED options, will it be enough to fit every key with either a diode or a LED? No SMD parts required?
//e and can somebody hint at the shipping costs to an european country? I don't want to create an account just for that.
Post by: DanielT on Fri, 21 November 2014, 14:13:38
Sorry if this is a stupid question:
If I don't care for all the SMD LED options, will it be enough to fit every key with either a diode or a LED? No SMD parts required?
//e and can somebody hint at the shipping costs to an european country? I don't want to create an account just for that.
For each switch you need a diode, that one is not optional, but it's also the easiest to solder because is not SMD.
For normal backlight (in switch LED) you need rezistors one per switch, these are SMD ones, not so easy to solder.
For side LED's these are SMD type and require also rezistors.
Shipping to EU should be around 23-25$ for Romania it was 23$.
Post by: Shiftshape on Sat, 22 November 2014, 08:18:08
GON da man fo' sure. :thumb:
Post by: DanielT on Sat, 22 November 2014, 08:42:40
Ehrmagawd! Just got my boards and I'm so pumped right now! I had no idea we were in for v2 pcbs.When the IC was made the stock PCB was green, at some point GON gave a hint that the new version of the PCB will be white. So actually this GB is for the stock version, and in fact is no longer a GB is just a thread about the white version because this is the new stock PCB :P
GON da man fo' sure. :thumb:
Post by: Shiftshape on Sun, 23 November 2014, 10:29:22
Ehrmagawd! Just got my boards and I'm so pumped right now! I had no idea we were in for v2 pcbs.When the IC was made the stock PCB was green, at some point GON gave a hint that the new version of the PCB will be white. So actually this GB is for the stock version, and in fact is no longer a GB is just a thread about the white version because this is the new stock PCB :P
GON da man fo' sure. :thumb:
Ah, I see. Still, surprises are always nice! :))
Post by: henz on Sun, 30 November 2014, 05:51:14