geekhack

geekhack Community => Keyboard Keycaps => Topic started by: sdiearly on Thu, 18 December 2014, 19:53:28

Title: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Thu, 18 December 2014, 19:53:28
Update Add-on Keys:
(http://i.imgur.com/IuzaDEi.jpg)

Here I choose two of Datacomp's Keyboard to try Big Shaped-L Enter
(http://i.imgur.com/1saec7K.jpg)
For Datacomp, The long stem of Enter Key will go down and pass through PCB.

1. Zowie Celeritas /w Miami
(http://i.imgur.com/2oLuR2z.jpg)
(http://i.imgur.com/5Tp8mmo.jpg)

2. SteelSeries 7G /w Red&Black
(http://i.imgur.com/U2qUXQr.jpg)
(http://i.imgur.com/O2j2wfl.jpg)

Update my received order:
(http://i.imgur.com/x0GbgZx.jpg)

I am lazy to try all of colors, choose black/yellow to take pictures.
Installed with KBP v60
(http://i.imgur.com/Ix5umlG.jpg)
(http://i.imgur.com/N0u1xIB.jpg)

Compare to other 60%
(http://i.imgur.com/S7soASK.jpg)

Update full set pictures,
notice: add-on keys are depend on demand, not standard products.

Key caps box:
(http://i.imgur.com/K1bguct.jpg)

Key caps frame:
(http://i.imgur.com/qWtIl3C.jpg)


1. Yellow/Black
(http://i.imgur.com/F5QrPAu.jpg)

2. Orange/Black
(http://i.imgur.com/JvqtEl8.jpg)

3. Red/Black
(http://i.imgur.com/knuDTZe.jpg)

4. Miami
(http://i.imgur.com/GfL9nQc.jpg)

Hi Geekers,

Tai-Hao is developing many new products recently.
I just received these samples last night, They provide me FOUR solutions in Bi-Color sets.

(http://i.imgur.com/6EidfZh.jpg)

1. Red/Black
(http://i.imgur.com/KjVyEIf.jpg)

2. Yellow/Black
(http://i.imgur.com/3jdCCa4.jpg)

3. Orange/Black
(http://i.imgur.com/W6fdHnE.jpg)

4. Likely Miami
(http://i.imgur.com/WFvkxqV.jpg)

Current information:
*. OEM profile
*. Thin molding


I will take pictures later to compare with below PBT keycaps I have on my hand and update in this OP :)
1. Vortex thin
2. Vortex thick
3. Keycool
4. Leopold
5. Noppoo
6. Cherry
7. SP


MOD EDIT: Fixed image links.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps with PBT
Post by: FrostyToast on Thu, 18 December 2014, 19:56:28
Interesting. They're not thick, but they might be fine even for a board I care about.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: hwood34 on Thu, 18 December 2014, 20:46:36
Hmm, seem decent, especially for how cheap they'll likely be
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: strafe on Thu, 18 December 2014, 21:17:32
Hopefully I can buy a complete orange/black and black/orange set if these become available in a group buy.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Thu, 18 December 2014, 23:22:13
Tai Hao are generally reasonable keycaps, especially for the money.  Remember that they have been producing keycaps for a long time, so they've pretty much works out all the kinks.

The legends are also very consistent, which does greatly improve the look of a keycap set.

The price of these will be interesting.  Hopefully it will be in a similar range to the existing ABS sets.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Thu, 18 December 2014, 23:28:37
Color me interested.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: MGH on Thu, 18 December 2014, 23:38:41
I'd be in for a PBT Miami :p
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: tbc on Thu, 18 December 2014, 23:59:52
how to they compare to dsa in terms of thickness?

do the sides have the same texture as the top?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: nubbinator on Fri, 19 December 2014, 00:13:27
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets. 
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: quake4mhg on Fri, 19 December 2014, 00:47:50
Oh god, Looks great! I have to work harder  :D
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Lu_e on Fri, 19 December 2014, 01:31:51
I'd be in for a PBT Miami :p

I may also 8-]
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Heliosphere on Fri, 19 December 2014, 01:43:13
Sweet bajesus, double-shot PBTs.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Liar on Fri, 19 December 2014, 02:46:11
I am definitely in for the Miami set, it looks fantastic
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Saviant on Fri, 19 December 2014, 03:25:56
I am liking the Orange / black would be down for a couple sets
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: tmk1207 on Fri, 19 December 2014, 06:21:09
Wow. Look greats ;)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: MOZ on Fri, 19 December 2014, 06:48:24
Interesting looks stuff. I'm not too bothered about material to be honest, I do like them to be thick though and not a found of OEM profile, perhaps in the future Tai Hao would look to have a Cherry/DCS profile or SA/tall profile, which I don't think would be happening soon or ever.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: frostylove on Fri, 19 December 2014, 11:10:38
PBT douleshot with Cherry profile would be fantastic, and IMO they would be better keycaps than SP ones. You can expect that Tai-hao will finally add novlties to their product. I don't care about whether it is wyse or Helvetica on my keybds, I only care whether it is cherry font or not. 
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Jixr on Fri, 19 December 2014, 11:22:39
awesome, I'm totally down with them cloning some of the popular sets.
If the miami comes out, I'd deff buy.

Spending $100 for a abs set, no thanks, but if I can get a copy set for $20-30, I'm in.

I'm still waiting on my ollivette set from one of the GB's on here though. Should be in early next year.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: margo baggins on Fri, 19 December 2014, 11:59:46
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets.

As ever nubbs has got it bang on.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: P3TC0CK on Fri, 19 December 2014, 13:59:30
Any reason you're doing Toxic Lite, Nostalgia, and Miami instead of something original?  Don't get me wrong, I love affordable Tai Hao sets, but we should strive to be doing something original instead of a remake of someone's sets.

As ever nubbs has got it bang on.

If you've ever looked at how a lot of these Asian companies produce products (especially Chinese companies) you'll notice that they start out making clones, copies, or budget versions of existing products then slowly branch out.

If you can release something that is successful in the broader market, then you can start developing your own niche products. The example sets are pretty niche outside of the enthusiast market (I love my miami key cap set, but there isn't a huge demand for them outside of GH, Reddit, etc) so making an entirely new set would require a lot of advertising/convincing on their part which they probably don't want to do.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: nubbinator on Fri, 19 December 2014, 14:49:06
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Sat, 20 December 2014, 18:44:26
PBT Dolch?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ideus on Sat, 20 December 2014, 19:13:18
Just for confirmation: The profile is Cherry like? Because Vortex DS PBTs are OEM profile, now a full set of the Vortex is at $20 usd at Massdrop, thus these caps should be even cheaper.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Sat, 20 December 2014, 19:23:17
Just for confirmation: The profile is Cherry like? Because Vortex DS PBTs are OEM profile, now a full set of the Vortex is at $20 usd at Massdrop, thus these caps should be even cheaper.

OP says OEM profile.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: cephelix on Sat, 20 December 2014, 22:25:33
These look good...i'd be in for a set if the price is reasonable
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: berserkfan on Sun, 21 December 2014, 11:29:05
Another big round of applause for Tai Hao, in making value sets so inexpensively. I think in the long run competition from Tai Hao will bring down prices for everyone.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: bazemk1979 on Sun, 21 December 2014, 15:12:51
all of this sets look good
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Danboard on Sun, 21 December 2014, 17:09:52
I wonder if they'll ever come out with some cherry profile keys.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ideus on Sun, 21 December 2014, 18:39:24
I do not use an standard ANSI nor ISO layout, thus, the main drawback from these sets is there is no alternative keys, like 1.75u 3rd row control, 1.5u 2nd row back space, 1.75u right shift, and so. I suppose their low cost prevent to produce any short runs for such special keys.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Tue, 23 December 2014, 00:11:23
Update pictures in our forum,
http://www.ptt.cc/bbs/Key_Mou_Pad/M.1419270128.A.52F.html (http://www.ptt.cc/bbs/Key_Mou_Pad/M.1419270128.A.52F.html)

I have no time to describe them in English currently.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Knxwledge on Tue, 23 December 2014, 14:46:11
Is there a release date yet?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: frostylove on Tue, 23 December 2014, 20:54:39
Thanks for the picture comparison!

For those who can't read Chinese: Generally the texture of Tai-Hao caps is much smother than other caps listed above except Cherry/GMK caps.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Data on Tue, 23 December 2014, 21:18:31
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Liar on Wed, 24 December 2014, 01:03:46
Thanks for the picture comparison!

For those who can't read Chinese: Generally the texture of Tai-Hao caps is much smother than other caps listed above except Cherry/GMK caps.

Now I am on the fence, I dislike the smooth texture of the POMs on my Noppoo  :-\
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Evo_Spec on Wed, 24 December 2014, 06:51:16
very cool! i was actually thinking about doing something in red/black
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: dante on Fri, 26 December 2014, 07:46:52
Tai Hao is also researching backlit keycaps.  No idea if they are PBT though.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: nubbinator on Fri, 26 December 2014, 08:53:31
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?

We can be, I'd just like to see innovation instead of taking the work of others without talking to them first.  Did they talk to Daniel, Bunny, or Lysol/Ivan before they did Miami, GH Nostalgia, and Toxic redux?  If they did, fine, if not, come on, take a chance and do something original.  There are literally hundreds or thousands of combinations they could do, ones I know people would love to see.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: LechnerDE on Thu, 15 January 2015, 04:39:41
Just found this thread.

Very interesting indeed ....if only those keys weren't OEM Profile...

But knowing myself I'd probably order one of each anyway, because you can't go wrong with these prices :D
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Thu, 15 January 2015, 05:22:18
Update full set pictures in OP.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: LechnerDE on Thu, 15 January 2015, 05:34:03
Update full set pictures in OP.

Thanks  :thumb:

I really like the orange/black set!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Thu, 15 January 2015, 12:59:35
Update full set pictures in OP.

Yeah the orange set looks good. Do you know if they will make Olivetti this way?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: intelli78 on Thu, 15 January 2015, 13:03:36
Very nice. Light years better than the Vortex PBT doubleshots. Will definitely pick up a couple sets -- I have been pleased with Tai Hao's ABS keycaps -- looking forward to these.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Flyersfan1 on Thu, 15 January 2015, 13:14:30
Can't wait for these!! Any ideas on when they'll be available?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Thu, 15 January 2015, 16:59:44
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Huxley2500 on Thu, 15 January 2015, 17:49:41
I get same error.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Hypersphere on Thu, 15 January 2015, 18:02:28
I hope they will also produce PBT sets with Alps/Matias-mount stems.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Thu, 15 January 2015, 19:11:35
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: tmk1207 on Thu, 15 January 2015, 23:11:53
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That�s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That�s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?

You can shared link folder images, right?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Fri, 16 January 2015, 00:03:17
Is anyone else not able to see the new pictures added to the OP?

When I first looked on my phone I could see them?  Now they are not even showing up in Firefox.


This is why Chrome is saying it can't display them

"403. That’s an error.

Your client does not have permission to get URL /0b8ttEFa50dCe1UXV9oDdCpMSUZH7YS0KarUoOvrtKjVuhwcs-bGsJX0ysjIOeSLgB6k_Lk3KYMJzOMC6XyOfW0SBJWS7T_g=w1242-h560 from this server.
(Client IP address: 2601:3:1380:566:3dd9:e5d0:8b1:b151)

Forbidden That’s all we know."

These images are saved in google drive, I have open the access right to everyone.

Maybe you need google account?

Hmm.  Yeah I'm always signed in to my Google account.  I wonder if it's something on GH's end? 

This is what I'm seeing:
(http://i1222.photobucket.com/albums/dd490/CurtisandCrystal/Screen%20Shots/GH-Pics_not_showing_up.jpg)

I have tried 4 different browsers.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Fri, 16 January 2015, 00:55:52
You can shared link folder images, right?

These images are in same folder.
https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing (https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing)

The strange point is that CommonCurt said he can view pictures on his phone previously.
But I didn't change anything on my google drive setting.

Probably language issue.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Evo_Spec on Fri, 16 January 2015, 01:03:03
Dang those are sexy. i want an orange black set.

You may have linked the wrong link, unless these don't work.
Key caps box:
(https://lh3.googleusercontent.com/5koE1hIxT_id0fiDZnerBMqFjNVp7rV_SS8YCqaX7KjDk6EXflnI-jrK0eK8CNmo_3lEEVrboU6Rbwu23wkAyiln8bk=w1894-h835)

Key caps frame: (Foam Packaging)
(https://lh3.googleusercontent.com/N9Y36N2ax0KK8QS5HhHMHczMcrsYW_RSP9zdPzdmRyWEG3Vb8OCizp6rhZQeBmqnwkd88tGzUafwpezMav2-i4G232w=w1894-h835)

1. Yellow/Black
(https://lh4.googleusercontent.com/CAfcCZ4NzJow6Lr0ZGGgi4HQuBsrL5KibHXrGbFbhR9G58HD-sWjsidPIhWlkYACLeV2rvl6NfZ2dsTVTzKXzoL2pHs=w1894-h835)

2. Red/Black
(https://lh4.googleusercontent.com/PYNj9XxumKcwWVaGR26tZgJCY_erI2fksvhM5BWoqnr55e7E9D1g1txKu5IpRZibDLqUjMLCRlUGqEsIIKQkM259u7c=w1894-h835)

3. Miami
(https://lh6.googleusercontent.com/VGfUvDRh7aya_DCgbu68nMtjC7ocnys9s74u1HBIzupviRqLT2nmm0kqBOlQLoBsCuOvR8DCV5mKPYm7jShgZTUNfh4=w1894-h835)

4. Orange/Black
(https://lh3.googleusercontent.com/RAEnuEyOrUfwCysaaBoELEQZiADN2FpHWphciqfbZ485qgOrKmOOzFaHLPlZW9lFmUlZSMF1xe-w01QDxQvZf0voNg4=w1894-h835)

*edit* rearranged the pictures and changed the names to reflect OP.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Fri, 16 January 2015, 01:35:48
The links are right.
Because some ones can see pictures.

They can review my thread like this:
(http://i.imgur.com/WDaOkVR.png)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Moralless on Fri, 16 January 2015, 01:43:40
The links are right.
Because some ones can see pictures.

They can review my thread like this:
Show Image
(http://i.imgur.com/WDaOkVR.png)


I'm able to see the pictures from Evo's post but not from the OP.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: tmk1207 on Fri, 16 January 2015, 02:29:55
You can shared link folder images, right?

These images are in same folder.
https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing (https://drive.google.com/folderview?id=0B4bUYjC4F8Sadk50QktWZFVUcU0&usp=sharing)

The strange point is that CommonCurt said he can view pictures on his phone previously.
But I didn't change anything on my google drive setting.

Probably language issue.

Thank you :p
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: infiniti on Fri, 16 January 2015, 08:36:22
I've uploaded the pictures to imgur and fixed the links in the OP. :thumb:
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Flyersfan1 on Fri, 16 January 2015, 08:40:18
I've uploaded the pictures to imgur and fixed the links in the OP. :thumb:
Thanks infiniti! I can't wait to try these out!


MOD NOTE: You're welcome! :p
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Data on Fri, 16 January 2015, 08:46:10
I want that orange set, but reverse the colorway (black alphas). :P

Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Thalandros on Fri, 16 January 2015, 16:56:23
Wow. I want one or two of these. They look amazing, especially for someone on a budget like me. Is there a rough ETA on these? if it is (and it's closeby) I might skip on the Vortex PBTs I was planning on getting.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Fri, 16 January 2015, 19:56:29
That yellow set looks a bit greenish to me.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Evo_Spec on Fri, 16 January 2015, 21:53:36
That yellow set looks a bit greenish to me.
Pretty sure that's due to the camera's white balance, here's a quick Lightroom auto white balance i threw together.

(http://puu.sh/eCMS9/a70bb5b8f4.jpg)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Sat, 17 January 2015, 01:03:20
Those both look a bit greenish to me :p

Maybe it's my eyes ...
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: psyEDk on Sat, 17 January 2015, 22:15:41
I want that orange set, but reverse the colorway (black alphas). :P

Seconded!
That would look awesome  :))
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: AKmalamute on Sat, 17 January 2015, 23:28:32
almost any of those combinations would be fine by me.

Looking forward to this actually happening!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Knxwledge on Sun, 18 January 2015, 11:25:18
when???
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: oledome on Sun, 18 January 2015, 13:18:22
Do want ISO.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: jabbon on Sun, 18 January 2015, 16:13:07
Do want ISO.

+1 !!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Findecanor on Mon, 19 January 2015, 02:09:38
I was about to write "No ISO = Lame". :P
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Mon, 19 January 2015, 03:00:49
when???

My order may be delivered at mid Feb. :)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: MAR82 on Mon, 19 January 2015, 08:07:07
Tai Hao is old and established, not new and are already large and succesful, finally breaking into the niche market with retailers like Newegg. 

Given that we have done GBs with them in colors we requested, I don't doubt that these colors were requested instead of doing novel colors.  Even if they weren't, the push should be for novel ideas and we should be working with the manufacturer to realize the concept.

I would like to see new schemes, not rehashed.

Yes, obviously.

In the meantime, why can't we just be happy for cheap PBT doubleshots?

We can be, I'd just like to see innovation instead of taking the work of others without talking to them first.  Did they talk to Daniel, Bunny, or Lysol/Ivan before they did Miami, GH Nostalgia, and Toxic redux?  If they did, fine, if not, come on, take a chance and do something original.  There are literally hundreds or thousands of combinations they could do, ones I know people would love to see.

Hi Nubb, you keep saying that they copied the Toxic set. First you say Toxic Lite , then you call it Toxic redux. But to me it looks much closer to the Bumblebee Set, over at KeyPop
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sidel on Mon, 19 January 2015, 13:33:21
You've definitely caught my interest. This looks very promising.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Knxwledge on Tue, 20 January 2015, 16:49:31
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Flyersfan1 on Tue, 20 January 2015, 17:00:06
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Wed, 21 January 2015, 22:33:15
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Wed, 21 January 2015, 22:34:53
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.

Have you heard if they will be making a Olivetti set in double shot PBT?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Fri, 23 January 2015, 13:31:41
Tai Hao will sell key cap sets directly in Taiwan.
outside marketing depend on other company.

Some companies have a bead on these, sho nuff

:-X
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Fri, 23 January 2015, 14:17:12
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Flyersfan1 on Fri, 23 January 2015, 14:19:46
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Fri, 23 January 2015, 16:41:49
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
The cat is sufficiently out of the bag...lol
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sethk_ on Fri, 23 January 2015, 16:45:59
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
The cat is sufficiently out of the bag...lol
(http://img3.wikia.nocookie.net/__cb20131126013116/adventuretimewithfinnandjake/images/thumb/8/81/Kappa.png/510px-Kappa.png)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Huxley2500 on Fri, 23 January 2015, 17:12:35
When?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Fri, 23 January 2015, 23:39:17
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
The cat is sufficiently out of the bag...lol

The cat and the bag have gone their separate ways :))
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Mon, 26 January 2015, 12:41:20
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
The cat is sufficiently out of the bag...lol
Show Image
(http://img3.wikia.nocookie.net/__cb20131126013116/adventuretimewithfinnandjake/images/thumb/8/81/Kappa.png/510px-Kappa.png)


Who dat?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Mon, 26 January 2015, 15:10:37
when???

My order may be delivered at mid Feb. :)

Are you gonna be doing a Group buy ?

or

Where can we purchase these?
Mechanicalkeyboards.com said they're getting some.

Wha-! We said we were getting Tao Hao ABS doubleshots... :-X
https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321 (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321)
The cat is sufficiently out of the bag...lol
Show Image
(http://img3.wikia.nocookie.net/__cb20131126013116/adventuretimewithfinnandjake/images/thumb/8/81/Kappa.png/510px-Kappa.png)


Who dat?

http://www.reddit.com/r/OutOfTheLoop/comments/297l9y/what_is_kappa_gray_face_no_space_and_what_does_it/
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: base_on_base on Mon, 26 January 2015, 15:46:22
When/where are these available? I couldn't find any information on Tai-Hao's website.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Fri, 30 January 2015, 00:15:31
When/where are these available? I couldn't find any information on Tai-Hao's website.

Tai-Hao is a vendor, they do not sell product to end user directly.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rabidwombat on Thu, 05 February 2015, 08:23:44
I was just surfing around Taobao, and sets are already going on sale from a couple of sellers there!

Before shipping (in Chinese Yuan), they cost around 200, compared to ~130 for the dual-color ABS sets, and ~100 for the single color ABS sets.

This should be a rough indication on the relative prices between the Tai-Hao sets.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Thu, 05 February 2015, 09:41:45
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Data on Thu, 05 February 2015, 11:50:36
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

(http://i.imgur.com/tMRRoGz.gif)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: jabbon on Thu, 05 February 2015, 14:07:27
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sethk_ on Thu, 05 February 2015, 14:46:01
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?
Doubleshot PBT
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Thu, 05 February 2015, 15:00:40
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: BrewCaps on Thu, 05 February 2015, 20:23:59
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

Good news!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: jabbon on Tue, 10 February 2015, 13:40:38
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

What about international shipping cost? Is it somehow affordable for europeans?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Tue, 10 February 2015, 13:56:21
We (https://geekhack.org/index.php?topic=31221.msg1598321#msg1598321) will be carrying them, and should have the first shipment by the end of February.  :thumb:

PBT or ABS?

All the banter between me and Flyersfan was just for fun. They will be PBT Doubleshot sets, we currently carry many of the ABS colors, however.

What about international shipping cost? Is it somehow affordable for europeans?

If you go to our website and add one of our currently stocked keycaps to your cart, and then proceed to checkout, it should calculate your shipping. If you need further assistance, just PM me, please.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Wed, 11 February 2015, 00:37:21
Update my received order~~
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Evo_Spec on Wed, 11 February 2015, 08:33:52
Update my received order~~

Thanks for the update, these look pretty sweet.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: slip84 on Wed, 11 February 2015, 08:35:18
Argh. Wish these were Cherry profile. They look nice.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Flyersfan1 on Thu, 12 February 2015, 09:27:24
These are now up for pre-order, I can't wait to pick up the orange+black set.  I missed out on Nostalgia, and they are my favorite hockey teams colors, so it's a win-win for me.

=Tai+Hao&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=40]http://mechanicalkeyboards.com/shop/index.php?l=search_list&s[search]=Tai+Hao&s[title]=Y&s[short_desc]=Y&s[full_desc]=Y&s[sku]=Y&s[match]=all&s[cid]=40 (http://mechanicalkeyboards.com/shop/index.php?l=search_list&s[search)

Miami also available for pre-order, how do I link shorten with my own text? I'm such a forum noob.
http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1168 (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1168)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: slip84 on Thu, 12 February 2015, 10:20:53
Orange and Black (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1169)
Bumble Bee (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171)
Dark Blood (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170)
Miami (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1168)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ccc24 on Thu, 12 February 2015, 12:01:36
says out of stock, is that just because it's preorders only?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Thu, 12 February 2015, 12:15:12
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Thu, 12 February 2015, 15:21:47
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

[attachimg=1]
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Thu, 12 February 2015, 16:06:00
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

I know I've asked this a few times, but I have yet to get a response from anyone.

Do you know if they plan on making a Olivetti, or classic beige double shot PBT set(s)?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Permeability on Thu, 12 February 2015, 18:12:03
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Thu, 12 February 2015, 21:56:47
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap

Beside base set (US ansi-104 keys), other extra keys depend on order,
From China, they may ask for 104 + 10 keys.
From my order, Tai-hao gave me 104 + 1(Cherry's off-center stem capslock) + 1 keys
From Taiwan, I found the retails have 2 SKU, 104 keys only and 114 keys like China's.
In mechanicalkeyboards website, the set seems with 104 + 7 keys

It's better to describe the detail which add-on keys this set will have.

The purple key is another series from Tai-Hao.
And I have the samples.
(http://i.imgur.com/AblMPQX.jpg)
(http://i.imgur.com/SEwTsAZ.jpg)
(http://i.imgur.com/qToEslE.jpg)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: simonyunhe on Sat, 14 February 2015, 03:39:12
Just receive my Taihao Miami.
(http://i.imgur.com/PDLPkx3.jpg)
(http://i.imgur.com/aAV5Qdm.jpg)
(http://i.imgur.com/my4r3P3.jpg)
(http://i.imgur.com/2YYZEsh.jpg)
(http://i.imgur.com/wCak6uG.jpg)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Sat, 14 February 2015, 04:04:26
Just receive my Taihao Miami.
Show Image
(http://i.imgur.com/wCak6uG.jpg)


Lookin good with that white case  :)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: base_on_base on Sat, 14 February 2015, 10:23:31
Just receive my Taihao Miami.
Show Image
(http://i.imgur.com/PDLPkx3.jpg)

Show Image
(http://i.imgur.com/aAV5Qdm.jpg)

Show Image
(http://i.imgur.com/my4r3P3.jpg)

Show Image
(http://i.imgur.com/2YYZEsh.jpg)

Show Image
(http://i.imgur.com/wCak6uG.jpg)


Yup, I'm sold.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Sat, 14 February 2015, 13:00:41
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Sat, 14 February 2015, 18:42:17
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?

Fair enough.

I have seen a couple of pictures of the sets elsewhere, and what is there didn't seem to warrant obfuscation.  Maybe different sets have different extras.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: simonyunhe on Sun, 15 February 2015, 02:56:57
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
The photos we have are the stock photos that Tai-Hao provided. Honestly, they have not disclosed any info regarding what is edited out of the pics. They may be items that would be copyright protected here in the US?

Fair enough.

I have seen a couple of pictures of the sets elsewhere, and what is there didn't seem to warrant obfuscation.  Maybe different sets have different extras.
I will just tell you guys what I received from the GB run by a Taihao authorized agent in China. Hopefully this might be helpful. The total keys inside the package should 114 keys + a mysterious keys. At this GB I could choose to have a full set of keys or 104 keys which take out the extra 10 keys. Finaly what I pick up 104 keys since my keyboard do not need the extra one. Here is everything in the package. (Please ignore the white caps in the first box, this is my Poker 2's original keycaps, I had already put the Miami keycaps on my keyboard.)
(http://i.imgur.com/3YOGzmM.jpg)

More detail about the mysterious key, I think the material covered outside the key is rubber to give more texture and the color I received is red but the pic I saw before is more purple to me.
(http://i.imgur.com/fnq5ANX.jpg)
(http://i.imgur.com/E7I13aL.jpg)

The extra keys (10 in total) + ISO kit.
(http://i.imgur.com/tCOCQtQ.jpg)
(http://i.imgur.com/33IuWSd.jpg)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: jonathanyu on Sun, 15 February 2015, 23:02:06
That doesn't look like a iso enter to me
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: intelli78 on Sun, 15 February 2015, 23:06:41
That doesn't look like a iso enter to me

LOL... no it is not...
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: KatzenKinder on Mon, 16 February 2015, 00:46:52
Wait... Oh my god. this could finally be a set for my Zowie! Who the hell made a big ass enter, really though!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: simonyunhe on Mon, 16 February 2015, 04:01:28
That doesn't look like a iso enter to me
I just find the "ISO Kit" is specific for SteelSeries 6GV2 and 7G keyboard. :eek:
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ManicMatt1125 on Tue, 17 February 2015, 08:29:39
says out of stock, is that just because it's preorders only?

Yes. We are accepting preorders until they get here hopefully by the end of next week.

In your pictures there are two panels with keycap cutouts.

In the ones with the keycap pullers, the key in the top right corner seems to have been whiteouted.

What is it?

(Attachment Link)
Check the updated first post, seems like some purple cap

Beside base set (US ansi-104 keys), other extra keys depend on order,
From China, they may ask for 104 + 10 keys.
From my order, Tai-hao gave me 104 + 1(Cherry's off-center stem capslock) + 1 keys
From Taiwan, I found the retails have 2 SKU, 104 keys only and 114 keys like China's.
In mechanicalkeyboards website, the set seems with 104 + 7 keys

It's better to describe the detail which add-on keys this set will have.

The purple key is another series from Tai-Hao.
And I have the samples.
Show Image
(http://i.imgur.com/AblMPQX.jpg)

Show Image
(http://i.imgur.com/SEwTsAZ.jpg)

Show Image
(http://i.imgur.com/qToEslE.jpg)


Any word on the Purple and Blue keys? How can I buy these?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rowdy on Tue, 17 February 2015, 15:06:08
Any word on the Purple and Blue keys? How can I buy these?

qtan might be stocking these soonish ...

https://geekhack.org/index.php?topic=68753.msg1644587#msg1644587
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Kreepz on Thu, 19 February 2015, 01:07:16
Im ready to order! where do I order a set?
1. Yellow/Black
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CommonCurt on Thu, 19 February 2015, 02:23:51
Im ready to order! where do I order a set?
1. Yellow/Black

Here --->  http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171 (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Thu, 19 February 2015, 12:40:34
We now have them in stock at MechanicalKeyboards.com (http://index.php)!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: slip84 on Thu, 19 February 2015, 12:43:39
We now have them in stock at MechanicalKeyboards.com (http://www.MechanicalKeyboards.com)!
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Lu_e on Thu, 19 February 2015, 13:53:33
The whole multi color thing... why? Just make them uniform.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Jixr on Thu, 19 February 2015, 14:09:14
ordered a miami set, i'm curious as to how the quality is. ( espc since I hate sp's keycap quality for the price of their caps )
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Kreepz on Fri, 20 February 2015, 02:46:01

Thank you!! SOLD TO ME! will post pics when I receive them.

Im ready to order! where do I order a set?
1. Yellow/Black

Here --->  http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171 (http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1171)
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: MathiasR on Fri, 20 February 2015, 03:12:25
Damn I need some ISO kits for this one  :eek:
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: KnivesM on Wed, 25 February 2015, 23:31:58
Has anyone been able to find any sets on TaoBao or any other sites that have the big ass enter set? I've been looking on TaoBao and can't seem to find any. All i'm able to find is the 114 sets which don't appear to have the big ass enter...

Edit: found a few, have links posted on Qtans subforum for a proxy hopefully
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Jixr on Thu, 26 February 2015, 10:34:13
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: 00zeRO on Thu, 26 February 2015, 13:50:19
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.

We are certainly sorry to hear that.

If we haven't already heard from you, please shoot us an email at support@mechanicalkeyboards.com and we will assist you with either a small refund, or return for your whole set.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: irjoe on Fri, 27 February 2015, 17:41:02
Anyone else have pictures of other sets than the miami set? Curious how the other sets look on keyboard
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: munch on Fri, 27 February 2015, 20:06:10
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: KnivesM on Sat, 28 February 2015, 00:23:40
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p
They do not, I bought a set hoping they would.  Although Qtan said he would be stocking sets that do on his site soon(next week maybe).
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: munch on Sat, 28 February 2015, 23:12:58
the Big Ass Enter doesn't come with these sets right?
I'd be interested in the http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170 set if it did come with the "ISO Kit".
for a 6Gv2.

confirm/deny please? :p
They do not, I bought a set hoping they would.  Although Qtan said he would be stocking sets that do on his site soon(next week maybe).

great, thank you very much! I will keep my eyes open.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Jixr on Mon, 02 March 2015, 08:43:45
Got my miami set from MK, and the spacebar had a crack in it, hopefully its just a minor issue and does not reflect on the QC of the brand, but so far, I'm really liking the set.

We are certainly sorry to hear that.

If we haven't already heard from you, please shoot us an email at support@mechanicalkeyboards.com and we will assist you with either a small refund, or return for your whole set.
I got a replacement spacebar, thanks for your help.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Thu, 05 March 2015, 20:15:53
Anyone else have pictures of other sets than the miami set? Curious how the other sets look on keyboard

Maybe I can show you after I get add-on keys for Celeritas / SS 7G / WKL Layout
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: sdiearly on Mon, 16 March 2015, 00:52:55
Update pictures of Add-on Keys in OP
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: bcredbottle on Tue, 07 April 2015, 07:33:23
I hope they will also produce PBT sets with Alps/Matias-mount stems.

Is there something we could do? Maybe start a MassDrop or contact the seller?

Edit: That message wasn't meant to be sarcastic. I'm genuinely interested
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: LennyRhys on Wed, 08 April 2015, 04:30:41
I got a Taihao white-on-red set a while ago and IMO they are considerably better quality than SP caps (I have over 1,000 random SP caps left over from a grab bag group buy).  I'd still use SP but they are far too expensive based on the quality and variety that Taihao offer.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Nikelu on Sat, 18 April 2015, 08:42:22
Does anyone have the orange black keycaps installed? They look really good and the Miami ones,but I cant find a picture of the orange ones.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: morethanless on Mon, 20 April 2015, 18:42:44
@Nikelu
Here you can see them in a video

https://www.keychatter.com/2015/03/18/video-tai-hao-doubleshot-pbt-keycap-typing-tests/

@all
how thick are they? I've seen the pics from the bottom of the cap, but have nothing to compare them to.
I think they are medium-thick pbt? Thicker than Filco ABS, but thinner than the Vortex or Leopold PBT.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: bcredbottle on Mon, 20 April 2015, 18:53:03
.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: morethanless on Mon, 20 April 2015, 19:29:29
Yeah they are the same.
And the yellow is too pale for my liking. I'd rather buy the orange set (if they are reasonably thick).
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: bcredbottle on Mon, 20 April 2015, 20:38:42
.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ideus on Mon, 20 April 2015, 21:06:24
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: Den441 on Mon, 20 April 2015, 23:06:31
I wish they would experiment a little more with the color schemes.  I guess they were trying to make safe picks when selecting them.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: CaplockJack on Fri, 24 April 2015, 17:15:13
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.

BigAss is a Chinese thing.  Shows wealth.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: rjacerden on Tue, 07 June 2016, 08:54:13
How can order this keycaps?
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: seville57 on Tue, 07 June 2016, 15:48:18
How can order this keycaps?

Don't know where you live and what keycaps set/s you want to buy but here is 2: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1170


https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1169




You can find some Tai-Hao sets here also:
https://www.mechanicalkeyboards.co.id/products/filter/col=keycaps


Miami and Sunshine sets are on page 2.



Edit: There is a GB (Group Buy) in this link: http://www.mechsupply.co.uk/product/tai-hao-pbt-sunshine


I have 4 Miami sets and 1 Sunshine set.




A bad old picture with 3 of my 4 Miami sets + my 550 paracord Miami sleeved USB cable (Pexon).
(http://i.imgur.com/2skehNa.jpg)





My Ducky One RGB YOTG with a Miami set and 4 different Pumpkin caps.
(http://i.imgur.com/B12M9Lw.jpg)








Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: zephyr11 on Wed, 29 June 2016, 21:55:10
need to get meself some Miami!!!

looks too good to not own a set.  :eek: :eek: :eek:
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: BucklingSpring on Sat, 23 July 2016, 11:17:37
Just order a set myself. The color are bright, the print look good but the PBT is paper thin. Kind of disappointed.
A relatively light pressure bends the edge.
The original space bar on my Deck requires at least for times that pressure to get close to that kind of bending.
I know we're not building a bridge with these but still. I was expecting something better.

[attachimg=1]
[attachimg=2]
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ideus on Sat, 23 July 2016, 12:38:36
Just order a set myself. The color are bright, the print look good but the PBT is paper thin. Kind of disappointed.
A relatively light pressure bends the edge.
The original space bar on my Deck requires at least for times that pressure to get close to that kind of bending.
I know we're not building a bridge with these but still. I was expecting something better.

(Attachment Link)
(Attachment Link)

I got the temptation to order a set of these, once or twice, I am glad I did not, after your reference: paper thin, and your picture, wow, these are near garbage, I am accustomed to OG Cherry, have a few GMK made key caps, that by the way, are not made equal. We know, GMK have the molds that use to be owned by Cherry, but, they are simple not the same, in any case, thank you very much for taking the time to post this.
Title: Re: [Tai-Hao] New Double Shot Molding Keycaps in PBT
Post by: ideus on Sat, 23 July 2016, 12:39:51
There is no point to use that big fat enter key that takes all that space; maybe, someone may enlight us regarding the "design purpose" of such monstrosity.

BigAss is a Chinese thing.  Shows wealth.

Really? Interesting, some American girls may win the wealthier prize then, LOL.