geekhack
geekhack Marketplace => Great Finds => Topic started by: JaccoW on Sun, 28 December 2014, 16:14:18
-
I'm sure this is something people here are interested in:
(http://i.imgur.com/kbbpuMh.jpg)
"Cherry toetsenboord - model MX1000 (http://www.marktplaats.nl/a/computers-en-software/toetsenborden/m880700432-cherry-toetsenboord-model-mx1000.html?c=be2da871b0d84f75c3056cc6db858f31&previousPage=lr)" :p
Seems to be a Cherry G80-1000 (http://deskthority.net/wiki/Cherry_G80-1000) with an AT or XT interface in QWERTY layout.
Probably doubleshots, screw-in stabilizers.
The seller is one town away so if someone is interested I can proxy.
Already sent him a message. ;)
-
Seems like he has two of them!
Never heard of a Cherry RS6000M (http://www.marktplaats.nl/a/computers-en-software/toetsenborden/m880704835-cherry-toetsenboord-model-rs6000m.html?c=3c1f5dcc18d02a99040ca8de656940d2&previousPage=lr) though. Could be a medical model.
EDIT: He used the same picture twice.
So it could either be a rebranded G80-3000... or a G83-RS6000. Which is a rubber dome.
-
I'd be interested in getting one for the vintage blacks if shipping isn't too much.
-
I'd be interested in getting one for the vintage blacks if shipping isn't too much.
Shipping should be between €16 and €23 with insurance for the complete board worldwide. Let's see what he says first.
-
I am also very very interested in it! Please let me know if I can get one from you! Thanks!
-
the caps condition looks superb from the pics. :O
-
Interesting to get switch & screw stab
-
Am I too late? :( can I get one if there's another?
-
If this is a G80, I'm down for one too.
-
Still haven't heard from the seller but the first one is already spoken for by MGH and Billnye.
If the second one is usable I will post pictures here first. Seems like there is a waiting list. :P
-
please count me
-
So, now I know why the seller didn't reply. He sold both to 'someone' in Belgium. :P
Gave him a call today. He was a little bit quiet when I told him how much the board was worth. XD
So, sorry guys. No doubleshots for anyone!
-
So, now I know why the seller didn't reply. He sold both to 'someone' in Belgium. :P
Gave him a call today. He was a little bit quiet when I told him how much the board was worth. XD
So, sorry guys. No doubleshots for anyone!
How much did you tell him they were worth? You can get boards like this for like $50-75 off taobao
-
So, now I know why the seller didn't reply. He sold both to 'someone' in Belgium. :P
Gave him a call today. He was a little bit quiet when I told him how much the board was worth. XD
So, sorry guys. No doubleshots for anyone!
I bet this was him after you guys hung up.
(http://weknowmemes.com/wp-content/uploads/2011/12/ive-made-a-huge-mistake.gif)
-
So, now I know why the seller didn't reply. He sold both to 'someone' in Belgium. :P
Gave him a call today. He was a little bit quiet when I told him how much the board was worth. XD
So, sorry guys. No doubleshots for anyone!
How much did you tell him they were worth? You can get boards like this for like $50-75 off taobao
Pretty much that. They might be in great condition if they always used a protective sheet in the hospital.
He is still trying to sell a Compaq rubber dome for €25.
He said he would write down my name for when he comes across some more. *fingers crossed*
-
:'( :'( rip
I hope you can find more in the future ^-^ I'll definitely be interested in buying one.
-
:'( :'( rip
I hope you can find more in the future ^-^ I'll definitely be interested in buying one.
:'( rip early vintage black dream
-
The seller just contacted me saying he had a M-TEK (Monterey International Corp.) - modelK104 / FCC ID: FKF456K-104 (http://deskthority.net/wiki/Monterey_K104). Anyone interested?
-
The seller just contacted me saying he had a M-TEK (Monterey International Corp.) - modelK104 / FCC ID: FKF456K-104 (http://deskthority.net/wiki/Monterey_K104). Anyone interested?
I would if they are blue alps. Will I not find out until I buy it and it arrives, or is there a way to know beforehand?
-
The seller just contacted me saying he had a M-TEK (Monterey International Corp.) - modelK104 / FCC ID: FKF456K-104 (http://deskthority.net/wiki/Monterey_K104). Anyone interested?
If they have blue alps or monterey blues, me too.
-
The seller just contacted me saying he had a M-TEK (Monterey International Corp.) - modelK104 / FCC ID: FKF456K-104 (http://deskthority.net/wiki/Monterey_K104). Anyone interested?
Definitely interested in SKCM Blues.
-
Follow up on the Monterey; I went by the sellers' house today and they were indeed SMK Blue Alps. :D
Made some pictures so that the Deskthority page can be updated.
(All pictures are clickable for high-res)
(http://i.imgur.com/GXyrXvHl.jpg) (http://imgur.com/GXyrXvH)
Picture time!
(http://i.imgur.com/jVkrPf2l.jpg) (http://imgur.com/jVkrPf2)
(http://i.imgur.com/BHLmovPl.jpg) (http://imgur.com/BHLmovP)
They're SMK Blue Alps. A clicky switch.
(http://i.imgur.com/tX0CR7nl.jpg) (http://imgur.com/tX0CR7n)
What looks like Costar stabilizers that are Cherry compatible!
(http://i.imgur.com/oXTojdtl.jpg) (http://imgur.com/oXTojdt)
Cherry compatible!
(http://i.imgur.com/ijEAknQl.jpg) (http://imgur.com/ijEAknQ)
The keycaps themselves are nothing to write home about. I have no idea what material they are made of. The codes underneath change per keycap.
(http://i.imgur.com/HiBlzYnl.jpg) (http://imgur.com/HiBlzYn)
Printing ... I have no idea yet. I'll take another shot. They seem to be dyesubs but the plastic used is slightly opaque when I shine a lot of light on it so the edges are hard to capture.
(http://i.imgur.com/MIolufLl.jpg) (http://imgur.com/MIolufL)
Macro shot.
And some more detail shots:
(http://i.imgur.com/xO1d4kSl.jpg) (http://imgur.com/xO1d4kS)
(http://i.imgur.com/kdV2bp3l.jpg) (http://imgur.com/kdV2bp3)
(http://i.imgur.com/CaZuhoKl.jpg) (http://imgur.com/CaZuhoK)
(http://i.imgur.com/6gCi3ptl.jpg) (http://imgur.com/6gCi3pt)
-
:eek: Awesome! ;D
-
Moar pics!
(http://i.imgur.com/R2mjLMqh.jpg) (http://imgur.com/R2mjLMq)
(http://i.imgur.com/Xenk7Meh.jpg) (http://imgur.com/Xenk7Me)
(http://i.imgur.com/HypPVL0h.jpg) (http://imgur.com/HypPVL0)
(http://i.imgur.com/USgWsYAh.jpg) (http://imgur.com/USgWsYA)
Dyesubs or pad-printing?