geekhack

geekhack Community => Keyboards => Topic started by: simao on Sat, 10 January 2015, 06:27:05

Title: help fixing ergodox
Post by: simao on Sat, 10 January 2015, 06:27:05
Hello,

The small usb connector on my ergodox broke, it was off the board, so I desoldered and soldered a new one there.

Now all the right side keys work properly, but none of the left side keys work.

How could I start troubleshooting this? I tested the cable with a multimeter and everything looks good so I don't really know what could I check anymore.

Any help would be appreciated. Thanks!
Title: Re: help fixing ergodox
Post by: tp4tissue on Sat, 10 January 2015, 06:37:39
IMHO solder the interconnect direct to board. Skip the trrs port which are crummy quality
Title: Re: help fixing ergodox
Post by: simao on Sun, 11 January 2015, 16:46:40
I don't think the problem is with the trrs port. I test the connection between the two halves with a multimeter and everything seems to work.

Could it be a problem with the usb connector?

The USB connector has 5 pins. For of them I can find a connection, to the cable that connects to the teensy. But there is a pin that aparently doesn't connect anywhere. Where should it be connected?

When looking at the back of the ergodox, looking at the USB connector, cables A, C, D and E connect to the teensy cable, but I can't figure out where B should be connected to.

Code: [Select]
A B
C D E

Thanks
Title: Re: help fixing ergodox
Post by: jacobolus on Sun, 11 January 2015, 17:40:35
Maybe an issue with the I/O expander? Or with one of the traces or solder joints somewhere on that side? If you post a highish-resolution photo of that side of the board in the 'ergodox' thread or in the 'living soldering thread', someone can probably offer advice.
Title: Re: help fixing ergodox
Post by: simao on Mon, 12 January 2015, 13:58:25
Is there a way I can test the IO/Expander? It might be the problem.

I tried my right half with a friend's left half and everything works so something is wrong on my left half.

Thanks