Print Page - [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..

geekhack Marketplace => Classifieds => Topic started by: fl0w3n on Wed, 15 April 2015, 23:13:02

Title: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Wed, 15 April 2015, 23:13:02

Hey guys. Looking to make room for some new stuff - namely Granite DSA set and my two GH60's. I haven't been keeping up with prices, so I'm just going to throw something out I think is close. If you're interested and think I'm way off base, message me and lets work it out.
I have Heat under fl0w3n and I've purchased items here in the past.

First up is a Leopold TKL with Browns. I've been using it for gaming/typing/office rotation for the past 1.5 years. I think I originally got it off a member on here. I'm keeping the PBT Dyesubs, but can throw any of the other keysets on it if you want it with keys. Looking to get $65 without keys or cable.

(http://i.imgur.com/g825oHS.jpg) (http://imgur.com/g825oHS)

Next is a white Filco TKL with Blacks. This was I think my second ever board and I loved it. Now Blacks are no longer my thing, and I don't have a use for another TKL once I get around to finishing my Phantom. Will sell it with the Double Shots on it (I don't even remember which GB they came from on here, they just showed up in my mail one day from Ivan). I may keep the White case and have an empty black case I can swap it for, unless you really want the white case. $70 for board, $75 for Double Shots.

(http://i.imgur.com/rzgZndw.jpg) (http://imgur.com/rzgZndw)
I also can sell it with my WYSE set, which I have a Moogle for, or the RGB on it, and will throw in a second set of WYSE keys that need to be Retrobrite'd.
(http://i.imgur.com/ugjUusT.jpg) (http://imgur.com/ugjUusT)

These are just some basic ABS blank whites. Light use, no shine. $40

(http://i.imgur.com/dzUprP2.jpg) (http://imgur.com/dzUprP2)

Vintage Cherry Black's I pulled off a WYSE board. $100

(http://i.imgur.com/OiaAlyI.jpg) (http://imgur.com/OiaAlyI)

Vortex PBT Laser Engraved set. Minimal use. $65

(http://i.imgur.com/nr19gHT.jpg) (http://imgur.com/nr19gHT)

Vortex Poker stock caps. Maybe a few minutes of use. $45

(http://i.imgur.com/oc2MGjF.jpg) (http://imgur.com/oc2MGjF)

55g and 65g springs. I decided clears are the minimum stiffness for me, so I don't have much use for these. Would trade for stiffer springs.
I don't even remember what I paid... $15 per bag? Rather trade them?

(http://i.imgur.com/boB3x4o.jpg) (http://imgur.com/boB3x4o)

Poker Case - White. Used for a few minutes. Been in the bubble wrap and original box since. $40

(http://i.imgur.com/VbDQlXC.jpg) (http://imgur.com/VbDQlXC)

Lastly, I forgot until I had already uploaded the pictures... here's a picture of all the stuff in one shot and my name tagged on it
(http://i.imgur.com/LJSwsb3.jpg) (http://imgur.com/LJSwsb3)

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fknraiden on Thu, 16 April 2015, 02:14:17

Those keycaps from Ivan are Dolch, they are easily worth 100+ with that color pack.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: clacktalk on Thu, 16 April 2015, 02:26:18

PM'd about the Filco TKL and the Dolch :]

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Thu, 16 April 2015, 21:10:08

Well I got bombarded with PM's lol.

Ah, that makes sense that they are Dolch... I always used to want a set, but now I don't like the feel of ABS vs PBT. I am pretty sure I have an ISO kit for it and a few other items.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: frosty on Fri, 17 April 2015, 06:12:02

Will take the filco if deal falls through with clacktalk, been hunting for a white filco everywhere.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: jackiecanev2 on Fri, 17 April 2015, 09:18:30

I think there might be a line for that one. ;D

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: osi on Fri, 17 April 2015, 11:38:59

Will take the filco if deal falls through with clacktalk and frosty

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: kht120 on Sat, 18 April 2015, 08:38:42

How much for 68 MX Black switches + the white Poker case + the WYSE keyset in the 3rd picture, shipped to CONUS?

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Sun, 19 April 2015, 01:57:17

Wow tried to respond to most all PMs. Have not had much time so nothing is sold yet, but this week I should be able to seal the deal and get stuff out.

Bump for my birthday :D give me a present and buy my junk :p

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Thu, 23 April 2015, 14:30:55

Switches, Filco, Dolch pending

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Thu, 14 April 2016, 14:56:13

So I disappeared for a while, but I'm back and looking to sell off my stuff. Once I get the GH60 stuff I ordered I'll likely sell that as well.

I'm thinking I'm just going to go with a HHKB or a Topre board.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: harlw on Fri, 15 April 2016, 07:18:19

The poker case the aluminum Pok3r?

Sent from my VS985 4G using Tapatalk

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: Crossfire on Fri, 15 April 2016, 07:23:15

YGPM ;)

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: merlin64 on Fri, 15 April 2016, 13:53:34

Sent you a PM!

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 00:34:13

So I got blown up after bumping this, I think I had 17 messages about the Dolch/Filco.

To answer some of the questions, I have the iso set for it as well and I believe the number pad too.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 00:36:40

Also, I think I'll sell my Phantom too with both iso and ansi plates. Probably sell my pbt dye subs too.

Basically want it all gone so I can pickup this project truck, then I'll probably try out a topre or something.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: Erzegovaz on Mon, 18 April 2016, 02:46:57

Quote from: fl0w3n on Mon, 18 April 2016, 00:34:13

So I got blown up after bumping this, I think I had 17 messages about the Dolch/Filco.

To answer some of the questions, I have the iso set for it as well and I believe the number pad too.

did u read my PM? :D

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: SKD on Mon, 18 April 2016, 07:27:30

Please tell me you post international? I want that pok3r case and maybe the white filco.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: SpAmRaY on Mon, 18 April 2016, 07:45:02

Most vintage blacks sell for ~$0.35/switch how many switches are you selling for $100?

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: merlin64 on Mon, 18 April 2016, 08:13:03

Hello I sent you a pm as well about non filco items lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: ccarlitos2 on Mon, 18 April 2016, 11:54:24

hey! do you still have those 55g springs? If so I'll buy them!

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 13:09:25

Quote from: SpAmRaY on Mon, 18 April 2016, 07:45:02

Most vintage blacks sell for ~$0.35/switch how many switches are you selling for $100?

Probably something like 115 switches, they are off an old WYSE board I got.

If you want them for $40 plus shipping I'll do that.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 13:10:22

Quote from: ccarlitos2 on Mon, 18 April 2016, 11:54:24

hey! do you still have those 55g springs? If so I'll buy them!

Yes but I'm having a hard time sorting who was first, I'm considering just going to a high bidder system lol

PM me

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 13:11:02

Quote from: SKD on Mon, 18 April 2016, 07:27:30

Please tell me you post international? I want that pok3r case and maybe the white filco.

I will consider international if all shipping costs are covered by purchaser

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 13:11:18

Quote from: merlin64 on Mon, 18 April 2016, 08:13:03

Hello I sent you a pm as well about non filco items lol

Sent from my SAMSUNG-SM-G900A using Tapatalk

I think I responded to you lol

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: user 18 on Mon, 18 April 2016, 14:33:08

Quote from: fl0w3n on Mon, 18 April 2016, 13:10:22

I'm considering just going to a high bidder system

Auctions are not allowed under the classifieds rules. All items must be sold for the listed price.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 22:45:17

Quote from: user 18 on Mon, 18 April 2016, 14:33:08

Quote from: fl0w3n on Mon, 18 April 2016, 13:10:22
I'm considering just going to a high bidder system

Auctions are not allowed under the classifieds rules. All items must be sold for the listed price.

I haven't been around for a while, I know it used to be popular to do on here.

Title: Re: [FS] 55g springs, 65g springs, Filco blacks, Leopold Browns, PBT/ABS caps, etc..
Post by: fl0w3n on Mon, 18 April 2016, 22:53:42

Here's a few more things...

Two unused PBT Double Shot sets, I don't remember what I paid for these... so I'm just going to say $50 each. If this is way off base just shoot me a fair offer, I don't feel like researching what I paid.
(http://imgur.com/hxkVOjO.jpg)

Here's the Phantom I was talking about considering selling... Still kinda unsure about this one, but I guess for the right price. I stickered all the clears, I had purchased the 55g springs for it too, and at this point all I've done is solder the resistors and controller on but not the switches. I think it has a 1.5 ISO steel plate right now, but I've also got a 1.25 ANSI aluminum and I think one other plate. Sitting in a black TKL Filco case. Maybe I can trade this for a Topre board? I'll ask $200 and I can of course add any set of keycaps I have listed for additional price.
(http://i.imgur.com/OsEeaq5.jpg?1)
(http://i.imgur.com/w0GEHNB.jpg?1)

And here's a group shot of some of the stuff I have listed earlier, just for more verification. I've got another box sitting around too I might list some more stuff from.
(http://i.imgur.com/WCgeciv.jpg?1)