geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: ceflame on Thu, 16 April 2015, 19:42:33

Title: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: ceflame on Thu, 16 April 2015, 19:42:33
5/17/2015 All International orders shipped. US orders shipping out 5/18/2015
5/5/2015 Order currently shipping to us
5/4/2015 Order has been placed, awaiting shipment
(http://i.imgur.com/C8U0VNB.jpg) (http://i.imgur.com/C8U0VNB.jpg)
(image from winkeyless.kr)
Planned GB Schedule:
This is a group buy for PCB Mounted Cherry Stabilizers, proxied from Hojin.Yi of Winkeyless.kr.
Orders will be separated by US buyers and non-US buyers. Please select the proper order form to avoid any confusion.
I will be handling US orders, and Lpwl (https://geekhack.org/index.php?action=profile;u=32885) will be handling international orders.
Please PM or comment with any concerns. If have questions regarding international orders, message Lpwl.
(if you are International with order of 1-2 sets, and would still prefer US shipping, just PM me)

There will likely be extras purchased to account for missing orders and miscounts.

Stabilizer Pricing; US | International:
TKL Stabilizer Set - $12.00 | 11.60 €
Four 2.0x unit stabilizers
One 6.25x or 7.00x unit stabilizer

Full Stabilizer Set - $15.00 | 14.50 €
Seven 2.0x unit stabilizers
One 6.25x or 7.00x unit stabilizer

Extra 2.0x unit stabilizers - $1.50/ea | 1,45 €/ea

Shipping (US): Shipped from California
$3.00 for 1-2 sets via First-Class Mail Parcel
$5.95 for 3+ sets via Priority Mail Small Flat Rate Box
All US orders will be tracked

Shipping (International): Shipped from France
(may vary based on location and order size)
For 1 TKL set (< 20g):
shipping within France: 1.10 €
shipping within Europe: 1.20 €
shipping in other countries: 1.50 €

For ~3/4 TKL sets or 2 full-size sets (< 50g):
shipping within France: 1.50 €
shipping within Europe: 1.80 €
shipping in other countries: 2.40 €

For ~6/7 TKL sets or 4 full-sized sets (< 100g):
shipping within France: 2.20 €
shipping within Europe: 2.30 €
shipping in other countries: 2.90 €

Shipping options available:
Tracked: +3.20 €
Registered: +4.30 €

Paypal fee will be added on to the shipping cost in the invoice.


Order Form for USA Buyers (https://docs.google.com/forms/d/1itLhtLcph1HObqzNqLIw9b3ZIfKPEirXgnka2sY4w7U/viewform?c=0&w=1)
Order Form for International Buyers (https://docs.google.com/forms/d/10xMQTT9sF_c5rT8X13M1hrfPNqL8MwhBn1lR8xIQ_G0/viewform)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Flyersfan1 on Thu, 16 April 2015, 21:05:28
Awesome!!!! Ordering two full sets!!!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ZUUL42 on Thu, 16 April 2015, 21:53:04
Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

UPDATE
Doh! I must apologize. In the excitement I didn't notice the details. I need plate mount stabilizers. Your offer is very kind, but sadly I must bow out.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: heedpantsnow on Thu, 16 April 2015, 21:59:34
This is soooo needed!  Thanks!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Thu, 16 April 2015, 22:05:26
Quote from: ZUUL42 on Thu, 16 April 2015, 21:53:04
Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

I don't really want to complicate things with this buy.
I'm actually thinking of removing the TKL option and just taking orders for full sets (just a $3 price difference). I think it would make it easier for us and everyone else if we can get to the 100 MOQ bulk price drop so we can order more extras.
I'm not sure how many people are interested in each at this point, so we'll see.

For your situation, just buy the full set, and I can send you an extra 2.0x unit wire.
I have a couple extras with me, so just leave it in the comment section of your order.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: heedpantsnow on Thu, 16 April 2015, 22:07:56

Quote from: ZUUL42 on Thu, 16 April 2015, 21:53:04
Any chance I could get Eight 2.0x unit stabilizers? I have no need for spacebar stabilizers.

People are almost always looking for 6.25 wires. You can use it to help sby out.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: jonathanyu on Thu, 16 April 2015, 22:20:53
6.25 wire will be bent or straight?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Thu, 16 April 2015, 22:23:33
Quote from: jonathanyu on Thu, 16 April 2015, 22:20:53
6.25 wire will be bent or straight?

Straight
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Giorgio on Fri, 17 April 2015, 06:48:55
I'm interested in a full pcb set, but please.... Add the plate mount option, really... Also if it may feel counter intuitive, I'm sure that it would make it easier reaching the moq
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: heedpantsnow on Fri, 17 April 2015, 07:56:24
I've already ordered, just curious.

Are these screw in or snap in?

Are these genuine Cherry not Chinese knockoffs?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Fri, 17 April 2015, 12:20:59
Quote from: gianni on Fri, 17 April 2015, 06:48:55
I'm interested in a full pcb set, but please.... Add the plate mount option, really... Also if it may feel counter intuitive, I'm sure that it would make it easier reaching the moq
 
Sorry, probably won't be adding plate-mounted stabs into this buy.

I have emailed you back my reasoning, hope you understand!
Quote from: heedpantsnow on Fri, 17 April 2015, 07:56:24
I've already ordered, just curious.

Are these screw in or snap in?

Are these genuine Cherry not Chinese knockoffs?
These should be snap in stabilizers.

I have confirmed with Hojin that they are genuine Cherry, as he stated Cherry as their supplier for the 2x unit stabs. 

edit: Currently looking into possibilities of adding extra 2x unit stabilizers.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: admiralvorian on Fri, 17 April 2015, 12:37:16
ordered!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: r0mIe_Ng on Fri, 17 April 2015, 13:08:12
Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: animated on Fri, 17 April 2015, 13:24:41
Quote from: r0mIe_Ng on Fri, 17 April 2015, 13:08:12
Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!

Noobie question here.  Would these work for the Orion V2 since Orion is plate mounted and these are PCB mounted?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: r0mIe_Ng on Fri, 17 April 2015, 13:34:47
Quote from: animated on Fri, 17 April 2015, 13:24:41
Quote from: r0mIe_Ng on Fri, 17 April 2015, 13:08:12
Ordered!

Thank god this GB came just in time after ordering Orion V2. Btw I just re-order from 1 TKL set to 1 Full 6.25x set!

Noobie question here.  Would these work for the Orion V2 since Orion is plate mounted and these are PCB mounted?

Holy sh*t, thanks for noticing about that. I just realize this is PCB mounted, and V2 has plate... noobie order :(
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: rainb1ood on Fri, 17 April 2015, 13:40:39
It will work with the Orion V2
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: r0mIe_Ng on Fri, 17 April 2015, 13:42:13
Quote from: rainb1ood on Fri, 17 April 2015, 13:40:39
It will work with the Orion V2

Does it?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: rainb1ood on Fri, 17 April 2015, 13:44:30
Duck's plates are compatible with PCB mount, if not, only for PCB mounted

See pic

(http://m1.daumcdn.net/thumb/R750x0/?fname=http%3A%2F%2Fcfile28.uf.tistory.com%2Fimage%2F27330036551F4876230F2C)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Dreamre on Fri, 17 April 2015, 13:44:51
Quote from: r0mIe_Ng on Fri, 17 April 2015, 13:42:13
Quote from: rainb1ood on Fri, 17 April 2015, 13:40:39
It will work with the Orion V2

Does it?

The Orion is a Korean custom. Most, if not all, use PCB mounted stabs even though there are plates.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: r0mIe_Ng on Fri, 17 April 2015, 13:48:20
Quote from: rainb1ood on Fri, 17 April 2015, 13:44:30
Duck's plates are compatible with PCB mount, if not, only for PCB mounted

See pic

Show Image
(http://m1.daumcdn.net/thumb/R750x0/?fname=http%3A%2F%2Fcfile28.uf.tistory.com%2Fimage%2F27330036551F4876230F2C)


Quote from: Dreamre on Fri, 17 April 2015, 13:44:51
Quote from: r0mIe_Ng on Fri, 17 April 2015, 13:42:13
Quote from: rainb1ood on Fri, 17 April 2015, 13:40:39
It will work with the Orion V2

Does it?

The Orion is a Korean custom. Most, if not all, use PCB mounted stabs even though there are plates.


Thanks for your information!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Fri, 17 April 2015, 13:55:25
I'm definitely in for 1 full set... might add more though :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Sat, 18 April 2015, 06:35:52
Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

(http://i.imgur.com/zjpTbda.jpg)

(http://i.imgur.com/KxoRNsA.jpg)

(http://i.imgur.com/4LnKtzK.jpg)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Sat, 18 April 2015, 10:05:47
Quote from: Lpwl on Sat, 18 April 2015, 06:35:52
Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

Show Image
(http://i.imgur.com/zjpTbda.jpg)


Show Image
(http://i.imgur.com/KxoRNsA.jpg)


Show Image
(http://i.imgur.com/4LnKtzK.jpg)


Nice! What should we do to add items to our order? PM? Resubmit form?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Sat, 18 April 2015, 10:23:09
Quote from: awhitedev on Sat, 18 April 2015, 10:05:47
Quote from: Lpwl on Sat, 18 April 2015, 06:35:52
Hi there !

Extra 2u stabs are now available to order for $1.5 / 1,45€ per piece.

Show Image
(http://i.imgur.com/zjpTbda.jpg)


Show Image
(http://i.imgur.com/KxoRNsA.jpg)


Show Image
(http://i.imgur.com/4LnKtzK.jpg)


Nice! What should we do to add items to our order? PM? Resubmit form?

For my part (International orders) : Choose one or the other, it makes no difference.

But maybe ceflame has a different opinion on this so you'll have to wait for his answer :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lastpilot on Sat, 18 April 2015, 10:34:33
Form filled, thank you.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sat, 18 April 2015, 15:09:28
Sorry.. edited the form right before I slept and it screwed up the formatting and I didn't see..

AS Lpwl said, there are now extra 2x unit stabilizers to add-on to order.

If you ordered from me, just PM me to add-on, and I'll put it in manually.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: kacase on Sun, 19 April 2015, 01:47:30
Ordered as well for my Orion V2
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cods on Sun, 19 April 2015, 21:21:12
Ordered. Thanks!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Mon, 20 April 2015, 17:57:13
How many / more do we need for MOQ?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Mon, 20 April 2015, 18:50:34
The numbers are looking fine so far.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Wed, 22 April 2015, 17:43:20
As Ceflame indicated, the quantity needed for the price break is 100 sets - so don't be shy, keep them coming !

At least 10 sets must be ordered to let us break even from proxying this GB.

I'm pretty sure we can do better than this, don't you think ?  :p
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Fri, 24 April 2015, 16:21:18
Hey everyone!

Sending out order confirmation PMs right now.

Invoices will go out soon, as we are heading into the last week.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: hjc1710 on Sat, 25 April 2015, 01:13:12
Just hopped in for 5 sets!

Thanks for setting this up my good man! Came just in time, really do appreciate it :).
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sat, 25 April 2015, 04:51:09
Quote from: hjc1710 on Sat, 25 April 2015, 01:13:12
Just hopped in for 5 sets!

Thanks for setting this up my good man! Came just in time, really do appreciate it :).

Thanks a bunch for the support man :D

Invoices will be start to go out tomorrow evening up until the order end date.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: asgeirtj on Sat, 25 April 2015, 19:31:58
Quote from: ceflame on Thu, 16 April 2015, 22:23:33
Quote from: jonathanyu on Thu, 16 April 2015, 22:20:53
6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here? :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: suicidal_orange on Sat, 25 April 2015, 19:36:32
Quote from: asgeirtj on Sat, 25 April 2015, 19:31:58
Quote from: ceflame on Thu, 16 April 2015, 22:23:33
Quote from: jonathanyu on Thu, 16 April 2015, 22:20:53
6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here? :)

The wires are bent at the ends but some have two bends along the long part which these won't have :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: asgeirtj on Sat, 25 April 2015, 19:40:16
Quote from: suicidal_orange on Sat, 25 April 2015, 19:36:32
Quote from: asgeirtj on Sat, 25 April 2015, 19:31:58
Quote from: ceflame on Thu, 16 April 2015, 22:23:33
Quote from: jonathanyu on Thu, 16 April 2015, 22:20:53
6.25 wire will be bent or straight?

Straight

Now I'm confused, doesn't the wire have to be bent in order to work? Or am I missing something here? :)


The wires are bent at the ends but some have two bends along the long part which these won't have :)

Ah I see now, but why are some bent like that in the middle, what's the utility in that?

Also, I'm wondering whether to pull the trigger on these to be set in the future when I'll build a Kustom, however what's the advantage of buying in this gb as opposed to from gon for example?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sat, 25 April 2015, 21:20:16
Invoices have now been sent out for all the current US buyers. Let me know if I made a mistake on any of them.


Quote from: asgeirtj on Sat, 25 April 2015, 19:40:16
Ah I see now, but why are some bent like that in the middle, what's the utility in that?

Also, I'm wondering whether to pull the trigger on these to be set in the future when I'll build a Kustom, however what's the advantage of buying in this gb as opposed to from gon for example?

 
I am not too sure about the middle bent stabilizers, so hopefully someone else  can step in for that..

I put up this GB for people's convenience. Try adding a set of a stabilizers to your cart on GON's website. The flat shipping from GON is $25.60, so unless you have a larger order already, it is quite expensive to order just stabilizers alone.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: joey on Sun, 26 April 2015, 03:29:17
I should be putting in an order for these later today!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Sun, 26 April 2015, 05:07:18
Quote from: joey on Sun, 26 April 2015, 03:29:17
I should be putting in an order for these later today!

No problem !

We are still taking orders until May 1.


It's my turn now.

Invoices have just been sent out for all the current INTERNATIONAL buyers !

For problems or questions, please PM me :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Ouro on Sun, 26 April 2015, 09:35:52
Order submitted  :thumb:
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: suicidal_orange on Sun, 26 April 2015, 10:27:42
Invoice paid :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: kacase on Sun, 26 April 2015, 13:53:59
paid and looking forward!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: r0mIe_Ng on Sun, 26 April 2015, 16:27:26
Paid :D
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: joey on Sun, 26 April 2015, 18:32:45
So, the extra 2u option, that is including clips and wire?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Sun, 26 April 2015, 18:40:37
Quote from: joey on Sun, 26 April 2015, 18:32:45
So, the extra 2u option, that is including clips and wire?

Yeap !
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cottonsox on Sun, 26 April 2015, 19:27:04
Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Sun, 26 April 2015, 19:39:10
Quote from: Cottonsox on Sun, 26 April 2015, 19:27:04
Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

Shipping may be reasonable to Australia. I know for us in Murcia it costs more than $30-40 USD to have something shipped from GON.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sun, 26 April 2015, 19:39:58
Quote from: Cottonsox on Sun, 26 April 2015, 19:27:04
Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

What is GONs price for shipping to Australia? Are you logged in with an address set on his site?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cottonsox on Sun, 26 April 2015, 19:42:01
Quote from: awhitedev on Sun, 26 April 2015, 19:39:10
Quote from: Cottonsox on Sun, 26 April 2015, 19:27:04
Interested to know if these are different in anyway to what GON has to offer on his website?

Not trying to take away from the GB and honestly want to know if there is a difference, because i think it is cheaper to buy from him if you are getting more then 1 Set. The biggest question with GON is his postage and it may in fact turn out cheaper here for some. But for me it does infact seem cheaper once i get 2 TKL sets.

Shipping may be reasonable to Australia. I know for us in Murcia it costs more than $30-40 USD to have something shipped from GON.

Have you actually checked for stabs? i know i bought a plate of him and postage was considerably more expensive then it is for stabs. i know it may be still expensive, but i am honestly interested to know. As the difference for a 60% plate to a Bulk bundle of stabs was at least $20 for me, i would have to go back to my invoice to double check.

Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Sun, 26 April 2015, 19:46:19
You can do crazy things with GON's website !

Something like this ...

(http://i.imgur.com/fJDhiL4.png)

... until logging-in :

(http://i.imgur.com/CRgAS4n.png)

;D


Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cottonsox on Sun, 26 April 2015, 19:52:45
Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Sun, 26 April 2015, 19:54:10
Mine is still $25.60 shipping for X number of stab sets.

Edit: Shipping goes up $10 or so every 25 sets.

[attachimg=1]
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sun, 26 April 2015, 20:00:17
Quote from: Cottonsox on Sun, 26 April 2015, 19:52:45
Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cottonsox on Sun, 26 April 2015, 20:07:27
Quote from: ceflame on Sun, 26 April 2015, 20:00:17
Quote from: Cottonsox on Sun, 26 April 2015, 19:52:45
Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.

I must have missed that post regarding bulk buying being cheaper and just wanted to highlight for people who were in a similar situation to me.

If anyone is interested the break point when using GON becomes cheaper is when i am roughly spending $60 - $65 (including shipping)

Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Sun, 26 April 2015, 21:22:14
Quote from: Cottonsox on Sun, 26 April 2015, 20:07:27
Quote from: ceflame on Sun, 26 April 2015, 20:00:17
Quote from: Cottonsox on Sun, 26 April 2015, 19:52:45
Ahh, that is probably where i went wrong. I assumed i was logged in, but at work it's wasn't setup.

Yeah it pops up a fair bit after. Still a bulk pack of 2u stabs (50) comes out $60usd shipped for me. Which is still cheaper then this buy. If your looking at buying bulk in anyway his website is still potentially cheaper.

 I think the initial shipping price point is not ideal for anyone. But when you get a few items in the cart as you have shown it is more then reasonable. I know that i was planning on stocking up and i think GON will end up being cheaper for me and i think it is a valid option if people are buying more then a couple of sets of anything. As you save more on the stabs then the increase in shipping costs vs the GB.

Definitely, if you're going to buy bulk numbers by yourself, it is cheaper to get it yourself.

Like I've stated before, it is more convenient for those who want just 1 or a couple sets, since it is cheaper to have them proxied over rather than everyone having to order directly from a korean source.

I must have missed that post regarding bulk buying being cheaper and just wanted to highlight for people who were in a similar situation to me.

If anyone is interested the break point when using GON becomes cheaper is when i am roughly spending $60 - $65 (including shipping)


Bulk ordering yourself is cheaper for yourself, which is pretty much the reason I started this, because for people just wanting a couple sets can get it cheaper through this buy.

I understand that we're not strictly talking about GON's reliability, but the quantity purchased make it more worthwhile to order for yourself, but here's what I have to say for those thinking of ordering from GON.

I was initially going to do this proxy ordering bulk from GON, but a couple of reasons compelled me to go with Hojin.Yi from Winkeyless instead.
Please take my words with a grain of salt. These are my PERSONAL experiences. I have placed two orders with GON, both have had some problems, but in the end he has delivered, just not in an expected timely manner.

edit: Honestly, I do not want to downplay GON's services. This post is also sort of off-topic for this thread, but I felt I had to say something.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Sun, 26 April 2015, 21:30:25
This and the sticker GB that just opened up seem to have the same thing in common.

It's cheaper if all you want are a few pieces and don't want to pay for shipping around the world. Take it for what it is. Depending on the amount you want and where you live your results may differ. For us in murica... this is a great opportunity to save in shipping cost.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Cottonsox on Sun, 26 April 2015, 21:40:50
Just going to say one thing in regards to GON and leave it at that.

I have had a few interactions with GON and all went very well. Even when communication was slow. When i locked in my order(s) my order was shipping within a few days.

When your talking about products that do not required his assembly services or moq's to be met, I honestly believe these are shipped in a very timely manner. 

I don't want people to be scared away from his site when it comes to certain products he sells.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: unoab on Sun, 26 April 2015, 22:14:10
Quote from: awhitedev on Sun, 26 April 2015, 21:30:25
For us in murica... this is a great opportunity to save in shipping cost.

More
Well if you are just looking for bulk 2u stabs buying them from an electronics supplier like mouser, which has the cherry 2u stabs for $0.88 at a quantity of 1 and dropping after that, might be cheaper:
Cherry G99-0224 (http://www.mouser.com/Search/ProductDetail.aspx?R=0G990224)

And shipping starts at $4.99

Ceflame, you could possibly order all  extra 2u stabs from mouser to get a cheaper price if you get a number of orders for those.  You could probably save on the shipping from korea too if you could work out just getting the 6.25 stab bars from there and source all the stock parts locally.

Well.... I just did some searches, and you can even get cheaper than mouser (for the 2u stabs), I'll just leave this here for some thought:
Some even cheaper prices.. (https://octopart.com/g990224-cherry-4050311)


edit: ignore me I am an idiot and had the wrong part number there, all that is hidden above was for plate mount stabs, PCB mount ones are these
PCB mount 2u stabs (https://octopart.com/search?q=G990742)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: hjc1710 on Sun, 26 April 2015, 23:02:49
ceflame, can I alter my order? I want to drop 2 stabs and get some gold ones from SPRiT now that he's doing wires + plastic parts. I haven't paid my invoice yet.

Whatchu want me do? PM'd to start it.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: swimmingbird on Sun, 26 April 2015, 23:19:46
Down for 2 sets of complete 6.25
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: TheOpposition on Sun, 26 April 2015, 23:27:34
I'm glad I saw this, in for 2 sets
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lastpilot on Mon, 27 April 2015, 11:00:36
Received my invoice, it will be paid Wednesday night. Thank you ceflame!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: joey on Tue, 28 April 2015, 18:44:41
Filled the form!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Tue, 28 April 2015, 19:19:42
How close to 100 sets are we now? :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Tue, 28 April 2015, 19:36:51
Quote from: awhitedev on Tue, 28 April 2015, 19:19:42
How close to 100 sets are we now? :)

Don't think we will be able make it to 100 sets, unfortunately.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: swimmingbird on Tue, 28 April 2015, 22:06:52
Quote from: ceflame on Tue, 28 April 2015, 19:36:51
Quote from: awhitedev on Tue, 28 April 2015, 19:19:42
How close to 100 sets are we now? :)

Don't think we will be able make it to 100 sets, unfortunately.

What's it at?
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Tue, 28 April 2015, 22:33:13
I'm currently at 37 sets, not sure what Lpwl is at.

Not sure if Hojin will allow us to get the bulk pricing for our combined order numbers, but if we assume he will, and Lpwl is at similar numbers to me,
then we would still need ~25-35 more sets ordered.

3 more days left.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Wed, 29 April 2015, 04:54:16
Quote from: awhitedev on Tue, 28 April 2015, 19:19:42
How close to 100 sets are we now? :)

There is some good news regarding this !

Right now, it's the middle of the night in California but - no worries - ceflame will explain everything in a few hours.

;)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: awhitedev on Wed, 29 April 2015, 05:41:38
Quote from: Lpwl on Wed, 29 April 2015, 04:54:16
Quote from: awhitedev on Tue, 28 April 2015, 19:19:42
How close to 100 sets are we now? :)

There is some good news regarding this !

Right now, it's the middle of the night in California but - no worries - ceflame will explain everything in a few hours.

;)

#hype! If we're close to the price break it might motivate people to buy more to meet it. Even if it is just a 10% break :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: ceflame on Wed, 29 April 2015, 17:55:24
Hojin has offered us the 10% discount regardless of hitting 100 sets or not.

He is offering 10-20% discounts on most options on his site (including pcb/housing) if members are looking to run group buys for parts.

Unfortunately, since we were not fully anticipating reaching the 100 MOQ for 10% price drop, we had already sent out and received invoices from most people who have joined.

Here is what we have decided to do, since it would be a lot of work for me and Lpwl. If you have already joined, we are offering you a partial refund of $0.90 per TKL set or $1.20 per full set (numbers will be so-so in Euro) by request. Just send a PM to me (US buyers) or Lpwl (international buyers). Otherwise, your money will go towards supporting us :) .

Subsequent buyers (now until the end) will still be paying our original set GB price for consistency. Thanks!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: Lpwl on Thu, 30 April 2015, 22:58:48
Last day to order !
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: radio_killah on Thu, 30 April 2015, 23:26:32
Edit. Sent you a pm.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (taking orders)
Post by: swimmingbird on Fri, 01 May 2015, 01:48:08
Come on guys you know you want some of these for that project you plan on doing! Get in on it!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: missalaire on Mon, 04 May 2015, 14:13:37
Quote from: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Mon, 04 May 2015, 19:48:04
Quote from: missalaire on Mon, 04 May 2015, 14:13:37
Quote from: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler :)

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Lpwl on Tue, 05 May 2015, 07:24:08
We got dis !

;D
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: swimmingbird on Tue, 05 May 2015, 20:26:40
Yay!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: missalaire on Tue, 05 May 2015, 23:09:45
Quote from: ceflame on Mon, 04 May 2015, 19:48:04
Quote from: missalaire on Mon, 04 May 2015, 14:13:37
Quote from: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler :)

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Tue, 05 May 2015, 23:57:36
Quote from: missalaire on Tue, 05 May 2015, 23:09:45
Quote from: ceflame on Mon, 04 May 2015, 19:48:04
Quote from: missalaire on Mon, 04 May 2015, 14:13:37
Quote from: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler :)

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute :)

No problem!

Just got word that the packages are on their way to us.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: swimmingbird on Wed, 06 May 2015, 07:57:54
Quote from: ceflame on Tue, 05 May 2015, 23:57:36
Quote from: missalaire on Tue, 05 May 2015, 23:09:45
Quote from: ceflame on Mon, 04 May 2015, 19:48:04
Quote from: missalaire on Mon, 04 May 2015, 14:13:37
Quote from: ceflame on Mon, 04 May 2015, 03:16:25
Quote from: missalaire on Mon, 04 May 2015, 03:11:43
Quote from: ceflame on Sat, 02 May 2015, 02:18:20
Orders are officially closed!
There are still a couple people on my side who have not yet paid their invoices. I will send out pm reminders, but I want to get this wrapped up as soon as possible
so that we can place our order with winkeyless.

If there's any non-paying orders, I'd love to take over 1x TKL stabilizer set. I thought there was more time left on this buy for some reason and missed the order deadline >.<

You can still put an order in. Just be able to pay the invoice within 1-2 days.
South Korea has non-working holidays until the 5th, so the order hasn't officially been submitted yet.

Awesome, order submitted.

Last thing I needed to have sent to my Orion V2 assembler :)

Invoice is sent..

and more importantly.. order has officially been placed!

I ordered a couple extras for each option, so if any USA people are interested, just PM me.

Paid, thanks for letting me get an order in last minute :)

No problem!

Just got word that the packages are on their way to us.

Man that was quick
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: quantalume on Mon, 11 May 2015, 10:24:57
I see I missed out on this, but if anyone decides they don't need/want theirs, or if there are any leftovers, please let me know.  I haven't been able to find any that can be delivered to the US for a reasonable price (< $25).  I need a set with a 6.25x spacebar stab.  Thanks.

Edit: Saw that ceflame ordered a couple extra sets.  PM sent.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Lpwl on Mon, 11 May 2015, 17:36:55
Great news : I received my package from winkeyless.kr this morning !

(http://i.imgur.com/Q6hDou5.jpg)

> I already counted (twice - ehm ... just to be sure haha) and sorted every INTERNATIONAL orders.

(http://i.imgur.com/LGCy0Oz.jpg)

This doesn't look much but it kept me busy for several hours  :p


Everything will be sent out either Wednesday or Friday (note : Ascension Thursday = public holiday).

I will send shipping confirmation with a picture of your package (and tracking number for those concerned).

:thumb:
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: suicidal_orange on Mon, 11 May 2015, 17:53:59
Wow, that was fast!  Should be here next week if the O-rings are anything to go by, I'd best get started...

Thanks Lwpl :D
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Lpwl on Fri, 15 May 2015, 05:28:46
All INTERNATIONAL orders (minus one) were shipped Wednesday.

The last one went out this morning ;)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: cmadrid on Fri, 15 May 2015, 09:27:42
That was quick
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: awhitedev on Fri, 15 May 2015, 10:11:33
Quote from: cmadrid on Fri, 15 May 2015, 09:27:42
That was quick

Indeed. I wonder how the US side of things is going? :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: onishima on Fri, 15 May 2015, 11:41:27
Ugh, sad I missed this...
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Fri, 15 May 2015, 17:31:25
Quote from: awhitedev on Fri, 15 May 2015, 10:11:33
Quote from: cmadrid on Fri, 15 May 2015, 09:27:42
That was quick

Indeed. I wonder how the US side of things is going? :)

Shipping taking a bit longer than expected :(

Tracking shows that it has departed Los Angeles USPS facility and is on the way to me.

I'm expecting to be able to ship everything about probably mid-next week.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Sat, 16 May 2015, 17:17:40
(http://i.imgur.com/6CZlaDv.jpg) (http://i.imgur.com/6CZlaDv.jpg)

Package came in! I'll see if I can get it sorted and shipped out by Monday.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: awhitedev on Sat, 16 May 2015, 17:29:43
Show Image
Quote from: ceflame on Sat, 16 May 2015, 17:17:40
(http://i.imgur.com/6CZlaDv.jpg) (http://i.imgur.com/6CZlaDv.jpg)

Package came in! I'll see if I can get it sorted and shipped out by Monday.

Woo! Great news :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Sat, 16 May 2015, 22:12:52
(http://i.imgur.com/vZwh9xQ.jpg?1) (http://i.imgur.com/vZwh9xQ.jpg?1)


Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Flyersfan1 on Sat, 16 May 2015, 22:31:10
Thanks so much for your hard work in making this such a quick turnaround guys!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Sed8op8 on Sun, 17 May 2015, 04:56:56
Quote from: Flyersfan1 on Sat, 16 May 2015, 22:31:10
Thanks so much for your hard work in making this such a quick turnaround guys!
^^^^ this!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Sun, 17 May 2015, 05:21:44
No problem guys :)

By the way.. PM me if you want your tracking number. Otherwise, just expect it to be in your mailbox probably sometime this week.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: awhitedev on Sun, 17 May 2015, 07:51:53
Show Image
Quote from: ceflame on Sat, 16 May 2015, 22:12:52
(http://i.imgur.com/vZwh9xQ.jpg?1) (http://i.imgur.com/vZwh9xQ.jpg?1)

Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Wow that was quick! As Flyersfan1 said, thank you for your hard work!

I see mine in that pile  :D
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: sethk_ on Sun, 17 May 2015, 07:59:08
Are you sure that you should be posting pictures with everyone's addresses...
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: swimmingbird on Sun, 17 May 2015, 23:45:04
Quote from: pwnnarwhal on Sun, 17 May 2015, 07:59:08
Are you sure that you should be posting pictures with everyone's addresses...

Kind of what I was thinking
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Sun, 17 May 2015, 23:49:59
Quote from: pwnnarwhal on Sun, 17 May 2015, 07:59:08
Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users!  :'( :'( :'(
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: minh278 on Mon, 18 May 2015, 08:25:10
Quote from: ceflame on Sun, 17 May 2015, 23:49:59
Quote from: pwnnarwhal on Sun, 17 May 2015, 07:59:08
Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users!  :'( :'( :'(

Im going to send you the new dell keyboards with the big-ass spacebars, heh heh heh.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Mon, 18 May 2015, 16:16:16
Quote from: minh278 on Mon, 18 May 2015, 08:25:10
Quote from: ceflame on Sun, 17 May 2015, 23:49:59
Quote from: pwnnarwhal on Sun, 17 May 2015, 07:59:08
Are you sure that you should be posting pictures with everyone's addresses...

Hmm, not that anyone ACTUALLY IN the groupbuy complained, but I will take it down.

Now I'm terrified that someone on this forum will do something seriously malicious with the addresses of a few geekhack users!  :'( :'( :'(

Im going to send you the new dell keyboards with the big-ass spacebars, heh heh heh.


Bring it on, I'm a recent convert to cup rubber  8)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: hojin.yi on Mon, 18 May 2015, 20:30:15
Show Image
Quote from: ceflame on Sat, 16 May 2015, 22:12:52
(http://i.imgur.com/vZwh9xQ.jpg?1) (http://i.imgur.com/vZwh9xQ.jpg?1)


Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: Flyersfan1 on Mon, 18 May 2015, 20:31:23
Quote from: hojin.yi on Mon, 18 May 2015, 20:30:15
Show Image
Quote from: ceflame on Sat, 16 May 2015, 22:12:52
(http://i.imgur.com/vZwh9xQ.jpg?1) (http://i.imgur.com/vZwh9xQ.jpg?1)


Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.
Thank YOU Hojin for supplying these in the first place! Great GB all around.
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: ceflame on Mon, 18 May 2015, 20:41:40
Quote from: Flyersfan1 on Mon, 18 May 2015, 20:31:23
Quote from: hojin.yi on Mon, 18 May 2015, 20:30:15
Show Image
Quote from: ceflame on Sat, 16 May 2015, 22:12:52
(http://i.imgur.com/vZwh9xQ.jpg?1) (http://i.imgur.com/vZwh9xQ.jpg?1)


Everything is packed and ready to go on Monday.

My current extras (US):
2x 6.25x TKL sets
3x 7x TKL sets
a lot of 2x wires

Going to wait until everyone receives their orders to make sure I didn't miss anything, so these are on hold for now.

Really you did great job!!
Thank you.
Thank YOU Hojin for supplying these in the first place! Great GB all around.

I agree. Hojin is the true person to thank here! Allowing us to run the stabilizer/sticker/pcb group buys for geekhack.

I feel like someone who offers all these things should AT LEAST get a vendor forum *wink* *wink* if any mods are looking!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: joey on Tue, 19 May 2015, 03:10:40
Anyone in the EU received them? Mine was sent 6 days ago..
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: suicidal_orange on Tue, 19 May 2015, 03:29:20
Quote from: joey on Tue, 19 May 2015, 03:10:40
Anyone in the EU received them? Mine was sent 6 days ago..
Nope!  But these would have triggered the metal detector in airport security, you know how long that adds to your journey...  O-rings from Lwpl only took 3 days in the same packaging so I'm sure these will arrive sometime this week :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (orders closed)
Post by: joey on Tue, 19 May 2015, 04:42:00
Quote from: suicidal_orange on Tue, 19 May 2015, 03:29:20
Quote from: joey on Tue, 19 May 2015, 03:10:40
Anyone in the EU received them? Mine was sent 6 days ago..
Nope!  But these would have triggered the metal detector in airport security, you know how long that adds to your journey...  O-rings from Lwpl only took 3 days in the same packaging so I'm sure these will arrive sometime this week :)
Ok! Can you let me know when you receive yours!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: suicidal_orange on Wed, 20 May 2015, 12:59:08
Two sets of stabs have arrived safely - thanks again Lwpl :)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: joey on Wed, 20 May 2015, 13:02:38
Mine arrived today too!
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: Lpwl on Wed, 20 May 2015, 13:27:04
That's great news !  :thumb:
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: r0mIe_Ng on Wed, 27 May 2015, 05:57:06
My package had already arrived safety!

P.s: Sr for late email response :P

Mod Edit: Removed photo with personal info (addresses)
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: swimmingbird on Wed, 27 May 2015, 06:33:48
Got mine today! Thanks guys
Title: Re: [GB] PCB Mounted Cherry Stabilizers (shipping)
Post by: Cods on Sat, 30 May 2015, 01:53:08
Arrived yesterday - thanks mate, nice work.