geekhack

geekhack Marketplace => Great Finds => Topic started by: sprit on Sat, 25 April 2015, 00:33:48

Title: Gateron - MX Stabilizer Clone - Made in China
Post by: sprit on Sat, 25 April 2015, 00:33:48

Gateron       www.gateron.com (http://www.gateron.com)   

http://www.gateron.com/page153?product_id=58&brd=1 (http://www.gateron.com/page153?product_id=58&brd=1)
http://detail.1688.com/offer/43041617408.html?spm=a2615.2177701.0.0.V5Uhlw (http://detail.1688.com/offer/43041617408.html?spm=a2615.2177701.0.0.V5Uhlw) 
https://geekhack.org/index.php?topic=68943.msg1726319#msg1726319 (https://geekhack.org/index.php?topic=68943.msg1726319#msg1726319) 

-  Plate mount type only (Samples are coming to me)  -  PCB mount types  >  Not! Exist 25 April
-  Price : 1 pcs = $0.06    1set 10pcs = $0.60     MOQ =100,000 pcs      >   No Wires!  25 Apr.
-  Quality?  : Unknown,  6.25u Wire  Unknown,  7u wire unknown   >  No Wires!  25 Apr.
     
[attachimg=2]
   
[attachimg=1]
 
[attachimg=3]

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Dihedral on Sat, 25 April 2015, 00:43:09

100, 000 MOQ?

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Giorgio on Sat, 25 April 2015, 04:35:21

100'000 is not impossible to reach. Just decide that each order should have a moq of 100 pieces, for a total of $6, which translates to 1000 orders.
Sadly, it's more complicated than that, because I highly doubt that wires are included.

Quote from: Dihedral on Sat, 25 April 2015, 00:43:09

100, 000 MOQ?

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Prelim on Sat, 25 April 2015, 06:15:36

is it just me or their PBT caps look like thick BSP?  :eek: :eek:

http://www.gateron.com/page153?product_id=57&brd=1
(http://pro329750.pic16.websiteonline.cn/upload/7ck1.jpg)

MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math ;)
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: sethk_ on Sat, 25 April 2015, 06:55:28

Quote from: Prelim on Sat, 25 April 2015, 06:15:36

is it just me or their PBT caps look like thick BSP?  :eek: :eek:

http://www.gateron.com/page153?product_id=57&brd=1

Show Image

(http://pro329750.pic16.websiteonline.cn/upload/7ck1.jpg)

MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math ;)
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

I think these are the ones berserkerfan has

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Lpwl on Sat, 25 April 2015, 06:58:20

Quote from: Prelim on Sat, 25 April 2015, 06:15:36

is it just me or their PBT caps look like thick BSP?  :eek: :eek:

http://www.gateron.com/page153?product_id=57&brd=1

Show Image

(http://pro329750.pic16.websiteonline.cn/upload/7ck1.jpg)

MOQ seems to be 1000, however I can't figure out is caps or sets! :/ Since 100¥ is ~$15 it should be the entire set... BSP sets cost ~10 times more, just do the math ;)
http://detail.1688.com/offer/43041557394.html?spm=a2615.2177701.0.0.fSyPuT

Shadovved will probably run a GB for these caps  ;)

(source : [GB] Gateron Switch (https://geekhack.org/index.php?topic=68943.msg1717062#msg1717062))

EDIT :

But here are a few numbers :

   - MOQ : 200 sets (or 250 ? (https://geekhack.org/index.php?topic=68356.msg1648121#msg1648121))
   - Price per set : $31 (+ shipping)

(source : [IC] thread (https://geekhack.org/index.php?topic=68356.msg1622636#msg1622636))

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Prelim on Sat, 25 April 2015, 08:20:27

Quote from: Lpwl on Sat, 25 April 2015, 06:58:20

Shadovved will probably run a GB for these caps  ;)

(source : [GB] Gateron Switch (https://geekhack.org/index.php?topic=68943.msg1717062#msg1717062))

EDIT :

But here are a few numbers :

   - MOQ : 200 sets (or 250 ? (https://geekhack.org/index.php?topic=68356.msg1648121#msg1648121))
   - Price per set : $31 (+ shipping)

nice to know, but $31 for a set which cost $15 on Gateron? lol... guess I'll making GBs myself @@

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Flyersfan1 on Sat, 25 April 2015, 08:26:41

I hope these are better than the Hammer branded stabilizers, those suck.

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Lpwl on Sat, 25 April 2015, 08:37:03

Hammer ones are PCB-mounted.

(http://imsto.cn/image/data/stablizer1.JPG)
(image from imsto.cn (http://imsto.cn/index.php?route=product/product&path=61&product_id=55))

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: MrexD on Sat, 25 April 2015, 08:45:42

I'd love to replace the stock poker stabilisers.
spacebar wire is bent and causes rattle though.
hope these come with wires

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: sprit on Sat, 25 April 2015, 10:00:26

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?    :rolleyes:

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: Giorgio on Sat, 25 April 2015, 11:09:00

Surely transparent stabs are much less resistant to abrasion and offer more resistance, plus they are much more fragile.

Quote from: sprit on Sat, 25 April 2015, 10:00:26

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?    :rolleyes:

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: sprit on Sun, 26 April 2015, 01:54:21

Quote from: MrexD on Sat, 25 April 2015, 08:45:42

I'd love to replace the stock poker stabilisers.
spacebar wire is bent and causes rattle though.
hope these come with wires

I guess you just need To replace the spacebar wire only,   I got some custom stainless wires made at a factory, if you need it, pm me  :)

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: sprit on Sun, 26 April 2015, 07:08:50

Reply from Gateron,  for Stabs

:  Plate mount type only,  No Wires!
 
不能拿来做透明的pc/abs
收缩率不同，模具尺寸不一样，做出来的产品尺寸不一样的
黑色的，可以报给你
但是，我们没有卫星轴的钢丝   
 
Unable to use Transparent PC/ABS material (into the current ABS dedicated mould)
Due to the plastic shrink ratios differ,  the dimensions of the moulds differ in details
Current Black ABS plastic parts are available
But, we don't have metal wires for stabilizers   
[attach=1] 

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: StinkyTheDonut on Sun, 26 April 2015, 19:05:54

Quote from: sprit on Sat, 25 April 2015, 10:00:26

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?    :rolleyes:

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: wlhlm on Sun, 26 April 2015, 19:39:50

Quote from: StinkyTheDonut on Sun, 26 April 2015, 19:05:54

Quote from: sprit on Sat, 25 April 2015, 10:00:26

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?    :rolleyes:

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

Can you post a link to the stabs?

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: StinkyTheDonut on Mon, 27 April 2015, 01:37:46

Quote from: wlhlm on Sun, 26 April 2015, 19:39:50

Quote from: StinkyTheDonut on Sun, 26 April 2015, 19:05:54

Quote from: sprit on Sat, 25 April 2015, 10:00:26

Been dreaming of New Transparent stabs for years, feeling building new moulds will not that necessary at this moment, got 3-4 contacts to produce Black stabs at high Moq w poor or ordinary quality,  but i want transparent n -lucent !   Someday my things will come?    :rolleyes:

I've been looking at those white costar stabs on taobao.
They seem to look translucent like Gateron switch housing.
They aren't cherry stabs, but they are probably the next closest to your dream. lol

I'm want to get some but I can't seem to find any information about their quality. =(

Can you post a link to the stabs?

Here's a link to a random vendor with pics.
http://item.taobao.com/item.htm?spm=a230r.1.14.58.GjEDPM&id=43764958283&ns=1&abbucket=16#detail
Many of the vendors seem to sell both blacks and whites for both the inserts and plate mounts, but only have images of the blacks.

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: wlhlm on Mon, 27 April 2015, 01:39:42

Thanks!

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: StinkyTheDonut on Mon, 27 April 2015, 01:46:34

Quote from: wlhlm on Mon, 27 April 2015, 01:39:42

Thanks!

No problem

Title: Re: Gateron - MX Stabilizer Clone - Made in China
Post by: sprit on Wed, 29 April 2015, 06:33:15

Quote from: StinkyTheDonut on Mon, 27 April 2015, 01:46:34

Quote from: wlhlm on Mon, 27 April 2015, 01:39:42

Thanks!

No problem

Thanks here too!   Still looking for quality MX Stab clones   ;)