Post by: yuktsi on Wed, 06 May 2015, 04:16:07
(https://farm8.staticflickr.com/7708/17386783512_3ef6ec48fd_c.jpg)
(https://farm6.staticflickr.com/5451/17201186370_03e1278343_c.jpg)
(https://farm6.staticflickr.com/5460/16766237944_9909d3d206_c.jpg)
(https://farm8.staticflickr.com/7684/16766237804_bfea761d31_c.jpg)
(https://farm9.staticflickr.com/8742/17181319887_52d47704f0_c.jpg)
http://lzlife.tistory.com/entry/LZ-CP-1
Post by: Photekq on Wed, 06 May 2015, 04:17:01
Post by: azhdar on Wed, 06 May 2015, 04:23:48
Unfortunate name :-[
Don't you like a good amateur CP ?
Post by: hwood34 on Wed, 06 May 2015, 06:46:57
Post by: billnye on Wed, 06 May 2015, 06:58:18
Unfortunate name :-[^____^
Looks pretty nice, not really a fan of metal 1800s though.
Post by: radio_killah on Wed, 06 May 2015, 09:12:13
Too bad I ain't got no money.
Post by: Data on Wed, 06 May 2015, 11:21:28
Post by: demik on Wed, 06 May 2015, 11:32:26
Post by: SpAmRaY on Wed, 06 May 2015, 11:52:25
Lz is a fan of cheese pizza?
CP could = cheese pizza or cuddly bear or crowd pleaser or communist party
Post by: metalliqaz on Wed, 06 May 2015, 11:53:27
Unfortunate name :-[Yeah, but "LZ" is his name so he probably shouldn't leave it out
Post by: Melvang on Wed, 06 May 2015, 12:09:48
Neat. Something tells me those are not your standard Cherry stabilizer cutouts.
They are PCB mount cherry only.
Post by: taylordcraig on Wed, 06 May 2015, 12:54:37
Post by: Lastpilot on Wed, 06 May 2015, 13:36:01
Post by: VesperSAINT on Wed, 06 May 2015, 13:46:27
Post by: byker on Wed, 06 May 2015, 13:46:56
Post by: Data on Wed, 06 May 2015, 14:17:20
Neat. Something tells me those are not your standard Cherry stabilizer cutouts.
They are PCB mount cherry only.
They look like a huge pain in the ass to install. :-X
Post by: Melvang on Wed, 06 May 2015, 14:25:13
Neat. Something tells me those are not your standard Cherry stabilizer cutouts.
They are PCB mount cherry only.
They look like a huge pain in the ass to install. :-X
Not really. If a new build they go in before switches.
Post by: Sygaldry on Wed, 06 May 2015, 14:45:47
Post by: Joey Quinn on Wed, 06 May 2015, 17:19:37
Post by: lookitdisnub on Wed, 06 May 2015, 18:01:39
Post by: sethk_ on Wed, 06 May 2015, 18:13:14
Post by: jonathanyu on Wed, 06 May 2015, 18:20:34
Post by: Karura on Fri, 08 May 2015, 15:05:11
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Post by: Joey Quinn on Fri, 08 May 2015, 17:10:08
Which colour combo do you guys like the best?
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Black on silver is what I'd get. How do we even get these?
Post by: tristan1035 on Fri, 08 May 2015, 19:08:21
Which colour combo do you guys like the best?
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Black on silver is what I'd get. How do we even get these?
+1
I would so love to buy this instead of a Lightsaver since that seems to be taking a million years.
Post by: hwood34 on Fri, 08 May 2015, 19:26:00
Which colour combo do you guys like the best?I'm all for black on black
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Post by: yuktsi on Sat, 09 May 2015, 07:02:27
I am talking to big god LZ. If he allows, I will run the group buy.Which colour combo do you guys like the best?
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Black on silver is what I'd get. How do we even get these?
This board is real nice :thumb:
Post by: radio_killah on Sat, 09 May 2015, 11:48:40
I am talking to big god LZ. If he allows, I will run the group buy.Which colour combo do you guys like the best?
I'm thinking the black top/silver bottom looks great, but do any of you prefer an 100% black or 100% silver colour scheme instead?
Black on silver is what I'd get. How do we even get these?
This board is real nice :thumb:
;D
Post by: radio_killah on Sat, 09 May 2015, 12:35:46
Also it says LZ is starting in 5/12/15 but there is already a post up for the GB as of 5/8/15
Post by: ninjadoc on Sat, 09 May 2015, 13:10:11
Just found this. http://lzlife.tistory.com/entry/INTRO
Also it says LZ is starting in 5/12/15 but there is already a post up for the GB as of 5/8/15
The post on 5/8 is an info piece about the board. GB starts Monday.
Photeq - what is it about the name you don't like?
Post by: HTN47 on Sat, 09 May 2015, 14:31:17
The 1800 layout was too bulky looking for my taste due to the excessive space between the number row and F-row, and the lightsaver was too simplistic looking due to it not having a top half, this is literally the best of both worlds for me :)
I really hope someone can run this buy for GH!!
Post by: Data on Sat, 09 May 2015, 16:42:13
Just found this. http://lzlife.tistory.com/entry/INTRO
Also it says LZ is starting in 5/12/15 but there is already a post up for the GB as of 5/8/15
The post on 5/8 is an info piece about the board. GB starts Monday.
Photeq - what is it about the name you don't like?
CP is Child Porn in some circles. It's really only offensive if you spend way too much time on the Internet. :P
Post by: sethk_ on Sat, 09 May 2015, 19:01:55
Another meaning is Cheese Pizza, which is probably offending Photek more than anything else /sJust found this. http://lzlife.tistory.com/entry/INTRO (http://lzlife.tistory.com/entry/INTRO)
Also it says LZ is starting in 5/12/15 but there is already a post up for the GB as of 5/8/15
The post on 5/8 is an info piece about the board. GB starts Monday.
Photeq - what is it about the name you don't like?
CP is Child Porn in some circles. It's really only offensive if you spend way too much time on the Internet. :p
Post by: Mikey Mo on Sat, 09 May 2015, 20:25:58
Post by: HTN47 on Mon, 11 May 2015, 04:00:31
Must.... Get.... Proxy.... :-X
Post by: Karura on Mon, 11 May 2015, 04:09:28
Post by: seedvd on Mon, 11 May 2015, 12:04:16
Post by: yuktsi on Mon, 11 May 2015, 21:27:40
I think you don't need to get proxy. You can order one through LZ's international order with English version: http://lzlife.tistory.com/entry/LZ-CP-GB
You are right
Payment will be done through paypal
And keyboard will be directly shipped from South Korea.
Post by: radio_killah on Tue, 12 May 2015, 09:48:29
Any idea when invoices will go out?I think you don't need to get proxy. You can order one through LZ's international order with English version: http://lzlife.tistory.com/entry/LZ-CP-GB
You are right
Payment will be done through paypal
And keyboard will be directly shipped from South Korea.
Post by: Data on Tue, 12 May 2015, 16:22:44
Any idea when invoices will go out?I think you don't need to get proxy. You can order one through LZ's international order with English version: http://lzlife.tistory.com/entry/LZ-CP-GB
You are right
Payment will be done through paypal
And keyboard will be directly shipped from South Korea.
Payment deadline is 5/27, so it would have to be before then. Right?
Post by: Evo_Spec on Tue, 12 May 2015, 21:38:53
It says order deadline is the 23rdAny idea when invoices will go out?I think you don't need to get proxy. You can order one through LZ's international order with English version: http://lzlife.tistory.com/entry/LZ-CP-GB
You are right
Payment will be done through paypal
And keyboard will be directly shipped from South Korea.
Payment deadline is 5/27, so it would have to be before then. Right?
Edit: I read all the comments before but had a brainfart when posting this. I dislike mobile...
Post by: HTN47 on Wed, 20 May 2015, 02:48:46
Post by: malcomkern on Wed, 20 May 2015, 05:18:16
Post by: HTN47 on Wed, 20 May 2015, 13:21:57
I placed an order as well last Friday and send an email this Monday because it looked like nothing happened, but with a swift reply that the order came through and invoice etc will start on this Friday. About the same text as the last forumpost. :thumb:
Ohhh sweet! Thanks for the info :)
I got worried so I sent in another order haha
I guess I could always cancel one :D
Post by: tuantruong on Thu, 21 May 2015, 21:47:51
Post by: Karura on Thu, 21 May 2015, 22:15:50
Just paid my invoice. Seems like LZ doesn't offer assembly service. :(
How do you know? I see ninjadoc on the invoice and it shows that he has paid for assembly services!
Post by: tuantruong on Thu, 21 May 2015, 22:48:35
You may notice the note next to my name. LZ noted that "with out full assembled price". I asked him in the form if he could fully assemble it for me, then I get that note, so I guess he doesn't offer it. Not sure about ninjadoc's order.Just paid my invoice. Seems like LZ doesn't offer assembly service. :(
How do you know? I see ninjadoc on the invoice and it shows that he has paid for assembly services!
Post by: Karura on Fri, 22 May 2015, 00:02:35
Post by: LifeZ on Fri, 22 May 2015, 06:01:32
Ah, I think he just offers soldering, but not full assembly.
Hi,
I waited for your contact.
Please contact me by e-mail. (lzlife@tistory.com)
Please let know the options associated with the assembly.
If the final order is completed, we will re-send an invoice.
sry. my english is not good
:D
Post by: tristan1035 on Sun, 24 May 2015, 21:21:11
Post by: ninjadoc on Sun, 24 May 2015, 21:55:08
You may notice the note next to my name. LZ noted that "with out full assembled price". I asked him in the form if he could fully assemble it for me, then I get that note, so I guess he doesn't offer it. Not sure about ninjadoc's order.Just paid my invoice. Seems like LZ doesn't offer assembly service. :(
How do you know? I see ninjadoc on the invoice and it shows that he has paid for assembly services!
When you want assembly options you need to discuss it with LZ via email as he said. I have had boards assembled by him in a past group buy but I don't know if it is routinely offered or not.
Post by: Karura on Sun, 24 May 2015, 22:06:22
You may notice the note next to my name. LZ noted that "with out full assembled price". I asked him in the form if he could fully assemble it for me, then I get that note, so I guess he doesn't offer it. Not sure about ninjadoc's order.Just paid my invoice. Seems like LZ doesn't offer assembly service. :(
How do you know? I see ninjadoc on the invoice and it shows that he has paid for assembly services!
When you want assembly options you need to discuss it with LZ via email as he said. I have had boards assembled by him in a past group buy but I don't know if it is routinely offered or not.
Holy cow you ordered so many :D
What are your plans for the boards?
Post by: tuantruong on Sun, 24 May 2015, 23:49:53
yeah I got it sorted out with him. Thanks!You may notice the note next to my name. LZ noted that "with out full assembled price". I asked him in the form if he could fully assemble it for me, then I get that note, so I guess he doesn't offer it. Not sure about ninjadoc's order.Just paid my invoice. Seems like LZ doesn't offer assembly service. :(
How do you know? I see ninjadoc on the invoice and it shows that he has paid for assembly services!
When you want assembly options you need to discuss it with LZ via email as he said. I have had boards assembled by him in a past group buy but I don't know if it is routinely offered or not.
Post by: HTN47 on Wed, 12 August 2015, 17:54:37
Post by: Shanghaied on Wed, 12 August 2015, 20:14:23
Post by: Karura on Wed, 12 August 2015, 20:27:49
Post by: iamtootallforthis on Wed, 12 August 2015, 20:48:53
Post by: HTN47 on Wed, 12 August 2015, 22:06:06
LZ was on vacation. Hopefully he has an update for us soon.
Ohhh I see, that explains the lack of response from him. The last update was about a month ago and it seems like the milling process is almost done, hopefully it'll be ready for shipping by the end of this month :D
Post by: malcomkern on Mon, 17 August 2015, 03:36:05
Like to hear a status update about the GB if possible.
Post by: malcomkern on Tue, 18 August 2015, 07:38:07
I' am stoked ;D
Post by: HTN47 on Wed, 19 August 2015, 02:58:17
An e-mail just arrived telling me the LZ CP is ready to be shipped :p
I' am stoked ;D
Ohhh nice! I haven't received any emails yet but it's great that it's ready to be shipped :)
Post by: radish on Tue, 25 August 2015, 21:48:21
Post by: HTN47 on Tue, 25 August 2015, 23:47:13
got my keyboard todayCongrats!! :)
I just got an email today asking for address confirmation so I think I should be getting mine soon also :D
Post by: tuantruong on Wed, 26 August 2015, 09:30:17
got my keyboard todayCongrats!! :)
I just got an email today asking for address confirmation so I think I should be getting mine soon also :D
got my keyboard today
Nice guys! Please post some pics of them if you don't mind. :D
I am still waiting for mine. I sent him an email a couple days ago but haven't got reply yet. I guess the fully assembled keyboard takes a bit longer.
Post by: kaminbobby on Wed, 26 August 2015, 10:20:19
Post by: radish on Wed, 26 August 2015, 19:03:51
http://imgur.com/a/ltGLC (http://imgur.com/a/ltGLC)
(http://i.imgur.com/rPDw2e7.jpg)
Post by: FrostyToast on Wed, 26 August 2015, 19:04:33
Post by: radish on Wed, 26 August 2015, 21:29:59
Post by: Shanghaied on Wed, 26 August 2015, 22:22:52
Post by: radish on Wed, 26 August 2015, 22:36:58
Just spent about five hours soldering all the SMD components (I could swear half of that time was spent flipping the parts the right way up). Anyway, tried plugging it up with the PC, and noticed that only RGB1 to RGB6 (the RGB LEDs) stayed lit up, while the others only flashed very briefly. Anyone else seeing this? Not sure if it's actually a problem - the connection to the other LEDs are there, since they flashed, but I'm still a bit puzzled. And on that note, is there documentation for this board somewhere?
No idea, I only did the resistors just now. Still have to do the diodes. I'll let you know how the board reacts.
Post by: malcomkern on Thu, 27 August 2015, 07:46:29
Now the adventure begins, I never build a custom keyboard so I will be watching this thread closely for any build logs. And you can expect some questions for sure :p
Happy to be in this GB and looking forward to a superb keyboard.
Post by: JeremyFXDWG on Thu, 27 August 2015, 09:10:22
JP
Post by: radio_killah on Thu, 27 August 2015, 09:38:04
I am new to Geekhack an missed the GB. is there any way to get one of these still? This board is the exact layout i had in my mind when I started searching for a custom board and found geek hack.Only way would to get one would be to buy one from someone in the group buy in the classifieds. However there are only 14 people who participated so the chances might be slim..
JP
Post by: JeremyFXDWG on Thu, 27 August 2015, 10:21:26
I am new to Geekhack an missed the GB. is there any way to get one of these still? This board is the exact layout i had in my mind when I started searching for a custom board and found geek hack.Only way would to get one would be to buy one from someone in the group buy in the classifieds. However there are only 14 people who participated so the chances might be slim..
JP
Thanks... I was hoping that was not the case but figured it might be. If anyone is going to put theirs in the classifieds, please PM me first.
JP
Post by: tristan1035 on Thu, 27 August 2015, 15:16:27
Post by: Shanghaied on Thu, 27 August 2015, 15:22:11
This going to sound really noobish, but can someone link the resistors(?) necessary for the Capslock, ScrollLock, NumLock LEDS please?
They are, I think size, 2012. The values should be different since the LEDs have different colours, but the ones LZ provided are all 821s (820 Ohm).
Post by: radish on Thu, 27 August 2015, 19:07:08
Just spent about five hours soldering all the SMD components (I could swear half of that time was spent flipping the parts the right way up). Anyway, tried plugging it up with the PC, and noticed that only RGB1 to RGB6 (the RGB LEDs) stayed lit up, while the others only flashed very briefly. Anyone else seeing this? Not sure if it's actually a problem - the connection to the other LEDs are there, since they flashed, but I'm still a bit puzzled. And on that note, is there documentation for this board somewhere?This one is for you.
(http://i.imgur.com/LDoIAvo.jpg)
Post by: Shanghaied on Thu, 27 August 2015, 19:12:50
Just spent about five hours soldering all the SMD components (I could swear half of that time was spent flipping the parts the right way up). Anyway, tried plugging it up with the PC, and noticed that only RGB1 to RGB6 (the RGB LEDs) stayed lit up, while the others only flashed very briefly. Anyone else seeing this? Not sure if it's actually a problem - the connection to the other LEDs are there, since they flashed, but I'm still a bit puzzled. And on that note, is there documentation for this board somewhere?This one is for you.Show Image(http://i.imgur.com/LDoIAvo.jpg)
:)
Seriously though let me know when you come to RGB LEDs.
Post by: rpeterclark on Thu, 27 August 2015, 19:17:22
Just spent about five hours soldering all the SMD components (I could swear half of that time was spent flipping the parts the right way up). Anyway, tried plugging it up with the PC, and noticed that only RGB1 to RGB6 (the RGB LEDs) stayed lit up, while the others only flashed very briefly. Anyone else seeing this? Not sure if it's actually a problem - the connection to the other LEDs are there, since they flashed, but I'm still a bit puzzled. And on that note, is there documentation for this board somewhere?This one is for you.Show Image(http://i.imgur.com/LDoIAvo.jpg)
Don't use the flush cutter on those SIPs, just push them out:
Post by: radish on Thu, 27 August 2015, 20:19:53
Post by: radish on Thu, 27 August 2015, 20:58:12
All the LEDs on the back pulse rainbow vomit.
Post by: HTN47 on Thu, 27 August 2015, 21:04:13
I just wanna gauge when mine would come because I'm leaving town for a couple days and I kinda want to bring the parts along to have something to busy myself with :D
Post by: radish on Thu, 27 August 2015, 21:31:04
Post by: tristan1035 on Thu, 27 August 2015, 22:54:51
This going to sound really noobish, but can someone link the resistors(?) necessary for the Capslock, ScrollLock, NumLock LEDS please?
They are, I think size, 2012. The values should be different since the LEDs have different colours, but the ones LZ provided are all 821s (820 Ohm).
Thank you, but I can't seem to find resistors of that size, could you please link a shop? Also, would these be good as the diodes? http://ca.mouser.com/Search/ProductDetail.aspx?R=1N4148TRvirtualkey61370000virtualkey78-1N4148
If someone would just post a build-log with the components and location of said components that would be amazing.
Post by: radish on Thu, 27 August 2015, 23:24:31
This going to sound really noobish, but can someone link the resistors(?) necessary for the Capslock, ScrollLock, NumLock LEDS please?
They are, I think size, 2012. The values should be different since the LEDs have different colours, but the ones LZ provided are all 821s (820 Ohm).
Thank you, but I can't seem to find resistors of that size, could you please link a shop? Also, would these be good as the diodes? http://ca.mouser.com/Search/ProductDetail.aspx?R=1N4148TRvirtualkey61370000virtualkey78-1N4148
If someone would just post a build-log with the components and location of said components that would be amazing.
There are no holes for through hole diodes. So if you are putting together the lz cp pcb those wouldn't work. Maybe you can diy something but I would stick to your standard t4 diodes. I thought every kit came with a set of everything...
SMD Diodes (1N4148W) T4
Post by: tristan1035 on Fri, 28 August 2015, 00:24:13
Post by: xauser on Fri, 28 August 2015, 14:49:38
Post by: xauser on Sat, 29 August 2015, 11:29:15
Can somebody confirm this?
Post by: radish on Sat, 29 August 2015, 17:33:07
I had a look at the electronics today and soldered switch resistors and diodes. A first test of the matrix revealed that not all keys are working for me. Most keys of the number pad do not signal. A closer look at this showed that Atmega pins PD5, PD6 and PD7 don't work. My soldering work looks ok so I assume its firmware related.
Can somebody confirm this?
i can confirm one thing on my end. i did a electrical test and every key registered. the only keys that i cant confirm work yet is the ketc1. thats beacuse i didnt run through an indepth test. i just shorted everything and the entire board seems to be functioning as intended.
this might be a silly question... but have you checked your diode orientation? or maybe if you thinking the controller isnt making contact try to reflow the connections with fresh solder? i really hope you didnt get a dud controller, that would suck immensely!
all i can say with the info you gave.
edit.
does anyone have the layout chart for the space row? i saw it on the lz page, and now it seems like it was taken down.
Post by: radio_killah on Tue, 01 September 2015, 14:18:45
Post by: radish on Tue, 01 September 2015, 14:58:48
Did people receive tracking numbers after their stuff shipped? I got an email saying my order was ready but that was it.You should get a email soon saying it's shipped. From past exp Order ready means that all your ordered parts there boxed but not shipped.
Post by: malcomkern on Tue, 01 September 2015, 15:27:31
My box was very well packed and went through customs without a big delay.
I am very happy with how this GB went. Kudos to LZLife. :thumb:
Post by: seedvd on Wed, 02 September 2015, 18:51:33
Its built with lubed stock black gateron switches with clear switch tops and mill max sip sockets.
(http://i.imgur.com/fCFoL4m.jpg)
Post by: Sent on Wed, 02 September 2015, 19:26:44
I got mine last week and now its done.
Its built with lubed stock black gateron switches with clear cover and mill max sip.Show Image(http://i.imgur.com/fCFoL4m.jpg)
Looks great. :thumb:
Post by: JeremyFXDWG on Wed, 02 September 2015, 20:28:50
I got mine last week and now its done.
Its built with lubed stock black gateron switches with clear cover and mill max sip.Show Image(http://i.imgur.com/fCFoL4m.jpg)
So Jealous.....
Post by: LXXXIX on Thu, 03 September 2015, 22:35:01
Wish I didn't miss this.
Post by: Shanghaied on Tue, 15 September 2015, 22:37:27
Post by: luckyryan333 on Tue, 15 September 2015, 23:28:06
Anyone can tell me how this keyboard is programmed? I think I've read somewhere that programming goes through TMK, but now I can't find anything on it.
1. Firmware - released at Sep 7, 2015
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=3068848&sid=592d352085470ef0a62a07e687bdad6f
2. Key Remapper aka JigOn - released at Sep 3, 2015
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=3045303&sid=136e3060551d99db757ea663790e525b
Good luck with them!
Post by: radio_killah on Tue, 15 September 2015, 23:43:25
Anyone can tell me how this keyboard is programmed? I think I've read somewhere that programming goes through TMK, but now I can't find anything on it.
1. Firmware - released at Sep 7, 2015
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=3068848&sid=592d352085470ef0a62a07e687bdad6f
2. Key Remapper aka JigOn - released at Sep 3, 2015
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=3045303&sid=136e3060551d99db757ea663790e525b
Good luck with them!
It is programmed via JigON (http://kbdlab.co.kr/index.php?document_srl=2702787&mid=board_sw). It is super easy. Second only to GON's Nerdy GUI.
Post by: Shanghaied on Wed, 16 September 2015, 08:35:28
Post by: Shanghaied on Wed, 16 September 2015, 19:40:42
Without JigOn I can sometimes connect the keyboard and have it working, the rest of the times the RGB LEDs flashes rainbow colours, but the keyboard is otherwise non-functional.
Post by: tuantruong on Thu, 17 September 2015, 22:31:17
Without JigOn I can sometimes connect the keyboard and have it working, the rest of the times the RGB LEDs flashes rainbow colours, but the keyboard is otherwise non-functional.I got exactly the same problem, I connected the keyboard to my pc, only got the RGB LEDs flashes, and the PC doesn't recognize the keyboard, nothing is functional, I got this notice everytime I plug kb in:
(http://windows-exe-errors.com/wp-content/uploads/usb-device-not-recognized.gif)
Post by: Shanghaied on Fri, 18 September 2015, 19:58:29
Without JigOn I can sometimes connect the keyboard and have it working, the rest of the times the RGB LEDs flashes rainbow colours, but the keyboard is otherwise non-functional.I got exactly the same problem, I connected the keyboard to my pc, only got the RGB LEDs flashes, and the PC doesn't recognize the keyboard, nothing is functional, I got this notice everytime I plug kb in:
Show Image(http://windows-exe-errors.com/wp-content/uploads/usb-device-not-recognized.gif)
Okay I'm not sure if this applies to your case, but I've got mine working by first disconnecting the keyboard, start JigOn, and then connect the keyboard. Doing it in this sequence seems to allow me to programme the keyboard. It seems that if I start JigOn with the board connected to the computer, the board will enter some where state where the custom settings are either lost or the board is non-functional. Have only tried a couple of times, but that seems to be the case. Hope this helps.
Post by: tuantruong on Sat, 19 September 2015, 00:53:56
Well it doesn't work for me, but thanks!Okay I'm not sure if this applies to your case, but I've got mine working by first disconnecting the keyboard, start JigOn, and then connect the keyboard. Doing it in this sequence seems to allow me to programme the keyboard. It seems that if I start JigOn with the board connected to the computer, the board will enter some where state where the custom settings are either lost or the board is non-functional. Have only tried a couple of times, but that seems to be the case. Hope this helps.Without JigOn I can sometimes connect the keyboard and have it working, the rest of the times the RGB LEDs flashes rainbow colours, but the keyboard is otherwise non-functional.I got exactly the same problem, I connected the keyboard to my pc, only got the RGB LEDs flashes, and the PC doesn't recognize the keyboard, nothing is functional, I got this notice everytime I plug kb in:
Show Image(http://windows-exe-errors.com/wp-content/uploads/usb-device-not-recognized.gif)
This happened once with my duck orion,and had to replace the USB port tho, seems like I have to send out this one for repairing. :(
Post by: nubbinator on Sat, 19 September 2015, 01:03:06
Post by: yuktsi on Sat, 19 September 2015, 07:55:10
Ok, I have to ask, who the **** thought CP was a good name?why isn't CP a good name?
Post by: Shanghaied on Sat, 19 September 2015, 10:33:46
Ok, I have to ask, who the **** thought CP was a good name?
Stands for "compact" apparently.
Or any of these things:
https://en.wikipedia.org/wiki/CP
Now, if your mind goes there, you have only yourself to blame ;)
Post by: njbair on Sat, 19 September 2015, 10:50:10
Cheese Pizza? You perverts.Ok, I have to ask, who the **** thought CP was a good name?
Stands for "compact" apparently.
Or any of these things:
https://en.wikipedia.org/wiki/CP
Now, if your mind goes there, you have only yourself to blame ;)
Post by: daviswalkers on Sat, 19 September 2015, 13:35:06
Post by: quochung1989 on Sat, 19 September 2015, 20:17:36
Just found this GB and was curious if there's anywhere I can still get my hands on one of these or if there's an email I can reach out to LZ to see if he has any extras I tried translating his site to find a contact us/email but wasn't able to find anything.
His email:
Post by: daviswalkers on Sat, 19 September 2015, 20:18:47
Just found this GB and was curious if there's anywhere I can still get my hands on one of these or if there's an email I can reach out to LZ to see if he has any extras I tried translating his site to find a contact us/email but wasn't able to find anything.
His email:
Thanks, hopefully I can snag one somehow!
Post by: njbair on Sat, 19 September 2015, 21:04:38
Just found this GB and was curious if there's anywhere I can still get my hands on one of these or if there's an email I can reach out to LZ to see if he has any extras I tried translating his site to find a contact us/email but wasn't able to find anything.
His email:
You may want to edit that out or he'll be getting a lot more spam. This kind of thing should really go over PM.
Post by: quochung1989 on Sat, 19 September 2015, 21:52:03
Just found this GB and was curious if there's anywhere I can still get my hands on one of these or if there's an email I can reach out to LZ to see if he has any extras I tried translating his site to find a contact us/email but wasn't able to find anything.
His email:
You may want to edit that out or he'll be getting a lot more spam. This kind of thing should really go over PM.
Ok. I see. I forgot this. Thanks.
Post by: radish on Mon, 21 September 2015, 19:12:58
(http://i.imgur.com/oiOY66N.jpg)
was thinking of doing thing like this. but i have been having a pain of a time finding the right rows in the numpad i want.
Post by: malcomkern on Wed, 30 September 2015, 14:15:58
Post by: radish on Wed, 30 September 2015, 16:51:54
Post by: malcomkern on Thu, 01 October 2015, 01:10:24
[attachimg=1]
Post by: radish on Thu, 01 October 2015, 22:57:33
Post by: yuktsi on Fri, 02 October 2015, 04:33:12
Offcourse.Please do as what radish suggested, I had the same problem too.
(Attachment Link)
Reflowing the solder would fix the problem.
Post by: malcomkern on Fri, 02 October 2015, 14:09:15
I will solder the black Cherry lubed switches as well, see how that goes.
Thanks for the help so far.
Post by: radish on Fri, 02 October 2015, 19:48:59
Oke, thanks for the suggestion. I will do in the weekend.
I will solder the black Cherry lubed switches as well, see how that goes.
Thanks for the help so far.
just make sure to fix the LEDs 1st. if you solder more components you might run into problems trying to identifying and isolating why existing components arnt functioning.
Post by: malcomkern on Mon, 05 October 2015, 12:35:08
Never mind, just sloppy soldering on my part :p
Vomiting rainbow, now :thumb:
Post by: malcomkern on Thu, 08 October 2015, 01:42:51
Now the next round of fun begins, selecting a nice set of key caps.
Post by: malcomkern on Sun, 11 October 2015, 09:05:00
1. How do I get the leds in the special row under de USB working for Numlock, Capslock and Scrollock? Only numlock is working at the moment.
2. My KETC1 KEY seems not to register, if I use my multimeter I can see / hear it makes contact all right.
3. I have 3 switch leds not burning, these are, the V and the / and and the PrtScrn key, electrically they seem oke, I switched out leds and resistors but that didn't help.
Any help is appreciated.
Post by: malcomkern on Thu, 22 October 2015, 08:17:23
Post by: FrostyToast on Thu, 22 October 2015, 08:19:46
That's the only thing I can think of.
Post by: radish on Wed, 04 November 2015, 07:36:16
And some more questions.
1. How do I get the leds in the special row under de USB working for Numlock, Capslock and Scrollock? Only numlock is working at the moment.
2. My KETC1 KEY seems not to register, if I use my multimeter I can see / hear it makes contact all right.
3. I have 3 switch leds not burning, these are, the V and the / and and the PrtScrn key, electrically they seem oke, I switched out leds and resistors but that didn't help.
Any help is appreciated.
For 1. Its probably in the software. Most toggle keys are and you just have to find the function that controls those behaviour.
For 2 and 3 I would check what frosty suggested, but also make sure to try a different switch and LEDs. Just to rule out the possibility of defective components.
Post by: FrostyToast on Wed, 04 November 2015, 21:11:47
Post by: yuktsi on Wed, 04 November 2015, 21:36:24
I just assembled my CP but I have no idea how the LED programming works.Everything can be programmed in the JigOn software.
http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787
Post by: FrostyToast on Wed, 04 November 2015, 22:16:54
I just assembled my CP but I have no idea how the LED programming works.Everything can be programmed in the JigOn software.
http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787
I know about the software and I downloaded the latest version.
I just don't know what the options for the LEDs means.
After messing around with it for a while, I still don't know what things like "fading + push" means.
Post by: radish on Sat, 14 November 2015, 03:05:39
Tweaked some stuff, before I saved. Please & thanks
Post by: malcomkern on Sat, 14 November 2015, 16:09:41
Post by: radish on Wed, 18 November 2015, 08:10:44
This, what your looking for?
That's looks like it thanks allot. Somehow didn't think of saving the original layout, ooops.
Post by: radio_killah on Mon, 23 November 2015, 18:15:53