geekhack

geekhack Marketplace => Classifieds => Topic started by: FreeChemicals on Sat, 16 May 2015, 09:56:47

Title: [SOLD] 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Sat, 16 May 2015, 09:56:47
Hi,

I still have a bunch of stuff lying around, which I have no use for SOLD:
More
  • 99x LED 2x3x4 Green (ordered cyan, turns out to be green)
  • 66x LED 2x3x4 Emerald Green
  • 69x LED 2x3x4 Orange
  • 70x LED 2x3x4 Red
  • 130x SIP Socket
  • 90x SIP Socket
More
(http://i.imgur.com/2YGDsRMl.jpg) (http://imgur.com/2YGDsRM)

Also 2 HKP Ravens for sale @ $22 each, or trade:
More
(http://i.imgur.com/M7ebdgWl.jpg) (http://imgur.com/M7ebdgW)


I'm also on the searching for a few things:

A yellow left + right arrow Cherry profile keycap.
More
(http://i.imgur.com/5ibv5mFl.jpg) (http://imgur.com/5ibv5mF)


A Desko K keycap, to replace my damaged one.
More
(http://i.imgur.com/5WkC8jel.jpg)


100x 2x3x4 LEDs White


Complete album: http://imgur.com/a/8zZYh


Since I haven't used heatware before, I could provide feedback from other sites upon request (I did buy something from a fellow GH'er, https://geekhack.org/index.php?topic=66800.0). I would prefer to use a PayPal invoice (at least for the Ravens), and a traceable shipping method, yet that is quite expensive outside the Netherlands (€11 EU, €16 rest of the world).

EVERYTHING IS SOLD
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: radio_killah on Sun, 17 May 2015, 00:57:04
How much do you want for the red and orange leds?
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: Hellcatz on Sun, 17 May 2015, 01:05:04
Pmed don't need tacking just regular is fine.
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Sun, 17 May 2015, 04:27:06
Quote from: radio_killah on Sun, 17 May 2015, 00:57:04
How much do you want for the red and orange leds?

$4 per bag excl. shipping.

Quote from: Hellcatz on Sun, 17 May 2015, 01:05:04
Pmed don't need tacking just regular is fine.

YGPM :D
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Sun, 17 May 2015, 05:41:18
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?

Yes, but I'd like to give radio_killah a chance to reply. If (s)he doesn't want them, they are yours.
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: RoastPotatoes on Sun, 17 May 2015, 05:52:11
Quote from: FreeChemicals on Sun, 17 May 2015, 05:41:18
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?

Yes, but I'd like to give radio_killah a chance to reply. If (s)he doesn't want them, they are yours.
OK thanks. Are sip sockets necessary. I haven't used them before, but is there any advantage?
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Sun, 17 May 2015, 05:55:48
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:52:11
Quote from: FreeChemicals on Sun, 17 May 2015, 05:41:18
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?

Yes, but I'd like to give radio_killah a chance to reply. If (s)he doesn't want them, they are yours.
OK thanks. Are sip sockets necessary. I haven't used them before, but is there any advantage?

SIP sockets aren't required, but allow you to swap LEDs  without having to desolder them. They simply slide into the sockets. See https://geekhack.org/index.php?topic=51792.0 and http://imgur.com/a/Ux5ac (a small guide I wrote).
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: RoastPotatoes on Sun, 17 May 2015, 05:58:29
Quote from: FreeChemicals on Sun, 17 May 2015, 05:55:48
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:52:11
Quote from: FreeChemicals on Sun, 17 May 2015, 05:41:18
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?

Yes, but I'd like to give radio_killah a chance to reply. If (s)he doesn't want them, they are yours.
OK thanks. Are sip sockets necessary. I haven't used them before, but is there any advantage?

SIP sockets aren't required, but allow you to swap LEDs  without having to desolder them. They simply slide into the sockets. See https://geekhack.org/index.php?topic=51792.0 (https://geekhack.org/index.php?topic=51792.0) and http://imgur.com/a/Ux5ac (http://imgur.com/a/Ux5ac) (a small guide I wrote).
I think I saw your guide earlier :) Does this remove the need to modify the switches? or do 2x3x4mm led's not require switch modification in the first place?
Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Sun, 17 May 2015, 06:11:51
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:58:29
Quote from: FreeChemicals on Sun, 17 May 2015, 05:55:48
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:52:11
Quote from: FreeChemicals on Sun, 17 May 2015, 05:41:18
Quote from: RoastPotatoes on Sun, 17 May 2015, 05:01:47
Are the red led's still available?

Yes, but I'd like to give radio_killah a chance to reply. If (s)he doesn't want them, they are yours.
OK thanks. Are sip sockets necessary. I haven't used them before, but is there any advantage?

SIP sockets aren't required, but allow you to swap LEDs  without having to desolder them. They simply slide into the sockets. See https://geekhack.org/index.php?topic=51792.0 (https://geekhack.org/index.php?topic=51792.0) and http://imgur.com/a/Ux5ac (http://imgur.com/a/Ux5ac) (a small guide I wrote).
I think I saw your guide earlier :) Does this remove the need to modify the switches? or do 2x3x4mm led's not require switch modification in the first place?

If you wouldn't use SIP sockets, and your PCB has LED support, you shouldn't have to modify the switches to be able to solder the 2x3x4 LEDS in place. I found this guide which explains installing LEDs on a Poker 2 PCB: http://imgur.com/a/Y2Yyn

To be able to install the sockets, you would have to open the switches. Some plates support opening of the switches without having to desolder them, but that requires a certain type of switch cutout. See http://builder.swillkb.com/ for more info on different types of switch cutouts.

Title: Re: [WTS/WTT] HKP Ravens, 2x3x4 LEDs & SIP Sockets
Post by: FreeChemicals on Mon, 18 May 2015, 10:32:10
The Ravens are sold, I've modified the OP.
Title: Re: [WTS/WTT] 2x3x4 LEDs & SIP Sockets
Post by: Blackehart on Fri, 10 July 2015, 12:23:17
Shooting PM regarding sip sockets!