Preface:
I originally built this in Feb, and it was my first Kustom, but then I broke the PCB, and I recently got a new one, and it has stayed unbuilt, so I sold it as a board that I would custom build to their preferences. There are also some in-progress photos that are missing, but I can't be bothered to dig them up.
Disassembled Switches (Worn in clears from a Skidata board, had to clean out all the diodes)
(http://i.imgur.com/qnl9diP.jpg)
Stems (and a spring) in isopropyl alcohol to clean of all the gunk from the past 21 years
(http://i.imgur.com/i7MSOwk.jpg)
Switch casing in isopropyl alcohol to clean of all the gunk from the past 21 years
(http://i.imgur.com/hab2kfW.jpg)
Gold 62g springs!
(http://i.imgur.com/rnPLmHd.jpg)
Switches after being lubed, spring swapped, stickered, SIP socketed, and clear topped (I love the way these look!)
(http://i.imgur.com/hMX1BlE.jpg)
Switches put in place on the plate, ready for soldering!
(http://i.imgur.com/uPtPPIb.jpg)
Switches soldered!
(http://i.imgur.com/sTuAQQB.jpg)
Caps off photo
(http://i.imgur.com/FKOKcVE.jpg)
Another angle
(http://i.imgur.com/I0D1g7E.jpg)
My blank blue IMSTO caps on (sadly they aren't going where the board is going)
(http://i.imgur.com/RomT5Ur.jpg)
I have never done ergoclears properly, and some people might say that I did these wrong as far as lube goes, but from the typing I did on it I really like them, and will be doing it with my next boards, but maybe with 67g springs. :)
And typing video (seizure warning, seriously)