geekhack

geekhack Community => Keyboards => Topic started by: Wayward on Tue, 28 July 2015, 15:36:09

Title: Ergodox problem (teensy)
Post by: Wayward on Tue, 28 July 2015, 15:36:09

Hi guys, I'm new here. I'll try to write in a good english (I'm french  :thumb:)

So, I have bought an Ergodox at Massdrop (https://www.massdrop.com/buy/ergodox) and built it by myself. The soldering is ok.

I follow the assembly instructions (https://www.massdrop.com/ext/ergodox/assembly.php) but I'm stuck at Step 17.

I connect the USB, and the teensy blinks every 2 seconds. But when I push the teensy reset button, the light goes off and nothing happens.

« A Reboot OK message should flash on the Teensy Loader » but nothing happens.

I don't know how to solve this problem. If there is somenone who could help me, he'll be nice.

It's my last resort to make it run  :(

Thanks  :thumb:

Title: Re: Ergodox problem (teensy)
Post by: Wayward on Wed, 29 July 2015, 10:28:12

Bump.

Title: Re: Ergodox problem (teensy)
Post by: tp4tissue on Fri, 31 July 2015, 17:18:54

did you follow the flash instructions exactly?

you need to flash the .eep after the regular firmware.