geekhack

geekhack Projects => Making Stuff Together! => Topic started by: sakai4eva on Thu, 06 August 2015, 12:55:46

Title: Can't reprogram my GH60
Post by: sakai4eva on Thu, 06 August 2015, 12:55:46: Hi guys.

I feel like a retard this past week, because a few months ago I upgraded my entire PC but I forgot how I got the drivers for my board.

It's a GH60 Rev_CHN to be exact.

I have managed to install the drivers properly (ATMEGA32U4 shows up in device manager), but every single time the bootloader can't be found.

I'm completely stumped and I feel that I have missed a step or took a few things for granted with my old PC.

Any insight?
Title: Re: Can't reprogram my GH60
Post by: jdcarpe on Thu, 06 August 2015, 13:01:47: Did you install Atmel FLIP? What device does it show when you jump into boot loader mode while it's connected to your PC?
Title: Re: Can't reprogram my GH60
Post by: sakai4eva on Thu, 06 August 2015, 13:22:59: Quote from: jdcarpe on Thu, 06 August 2015, 13:01:47
Did you install Atmel FLIP? What device does it show when you jump into boot loader mode while it's connected to your PC?

http://imgur.com/mQJUl7n

Atmel FLIP installed.
Title: Re: Can't reprogram my GH60
Post by: jdcarpe on Thu, 06 August 2015, 13:24:56: Quote from: sakai4eva on Thu, 06 August 2015, 13:22:59
Quote from: jdcarpe on Thu, 06 August 2015, 13:01:47
Did you install Atmel FLIP? What device does it show when you jump into boot loader mode while it's connected to your PC?

http://imgur.com/mQJUl7n

Atmel FLIP installed.

Does the device appear to change after you press the button to jump into bootloader?
Title: Re: Can't reprogram my GH60
Post by: sakai4eva on Thu, 06 August 2015, 13:34:52: Quote from: jdcarpe on Thu, 06 August 2015, 13:24:56
Quote from: sakai4eva on Thu, 06 August 2015, 13:22:59
Quote from: jdcarpe on Thu, 06 August 2015, 13:01:47
Did you install Atmel FLIP? What device does it show when you jump into boot loader mode while it's connected to your PC?

http://imgur.com/mQJUl7n

Atmel FLIP installed.

Does the device appear to change after you press the button to jump into bootloader?

yeap. Atmel doesn't show up until I press the bootloader button.

EDIT: headed to bed now. 2:40am will try again tomorrow :(
Title: Re: Can't reprogram my GH60
Post by: jdcarpe on Thu, 06 August 2015, 13:40:17: Oh, do you have WinAVR installed?
Title: Re: Can't reprogram my GH60
Post by: sakai4eva on Thu, 06 August 2015, 19:11:30: Quote from: jdcarpe on Thu, 06 August 2015, 13:40:17
Oh, do you have WinAVR installed?

IS WinAVR necessary? I'll install that now...
Title: Re: Can't reprogram my GH60
Post by: telnet on Sun, 09 August 2015, 11:00:30: Quote from: sakai4eva on Thu, 06 August 2015, 19:11:30
Quote from: jdcarpe on Thu, 06 August 2015, 13:40:17
Oh, do you have WinAVR installed?

IS WinAVR necessary? I'll install that now...

I had a similar problem where it would stop at "waiting for bootloader...." stage.
What needed to be done was update the driver of ATm32U4DFU device to a WinUSB version by using Zadig which shipped with the latest version of tkg-toolkit.

After that the firmware flashed without issues.
Title: Re: Can't reprogram my GH60
Post by: sakai4eva on Sun, 09 August 2015, 21:36:00: Tried installing Zadig by itself, still no dice.

:(
Title: Re: Can't reprogram my GH60
Post by: telnet on Mon, 10 August 2015, 02:03:36: What do you see when you have zadig running and have the keyboard plugged in and pressed the firmware button?