Post by: LeandreN on Sun, 31 January 2016, 12:58:45
Please share your ideas in this (https://docs.google.com/forms/d/191xGV185thULgwkMbHpU5flkmDM0GqadhwpaAXzjgbM/viewform) form. Thanks.
Please fill out the Google form and discuss stuff here. This is seperate from the Winkeyless and HHKB plates I am planning.
PCBs by GON
Orange & black PCBs available.
Plates by me and JD
60% is still the theme because of the demand!
Plates are available in different colours.
(http://i.imgur.com/vADu9pj.gif)
(http://i.imgur.com/y9itidP.jpg)
(http://www.gonskeyboardworks.com/214-thickbox_default/nerd-60-ver20-pcb.jpg)
Post by: TalkingTree on Sun, 31 January 2016, 13:01:46
Post by: JorisBoers on Sun, 31 January 2016, 13:02:46
Post by: Sifo on Sun, 31 January 2016, 13:03:24
Post by: db268 on Sun, 31 January 2016, 13:07:32
Post by: LeandreN on Sun, 31 January 2016, 13:12:46
You'll never guess which answer was mine
EDIT: Octarine is the imaginary colour of magic
I will look that up for you Sifo and see if it is available.
Post by: LeandreN on Sun, 31 January 2016, 13:13:06
Filled.
You are always fast!
Post by: SaiZn on Sun, 31 January 2016, 13:24:34
Post by: LeandreN on Sun, 31 January 2016, 13:26:38
Any plans for a prototyper round 2?
Soon™
Post by: lashiel on Sun, 31 January 2016, 13:31:38
I'll have to think about what I want.
Edit: obviously, the above being in the case this happens. Filled out the form regardless.
Post by: xondat on Sun, 31 January 2016, 13:45:13
NAA
Post by: LeandreN on Sun, 31 January 2016, 13:49:21
I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).
Post by: ccarlitos2 on Sun, 31 January 2016, 13:51:29
edit: Filled out form :D :thumb:
Post by: LeandreN on Sun, 31 January 2016, 13:55:00
Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...
edit: Filled out form :D :thumb:
That GB is soon(trademark).
True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.
Post by: TalkingTree on Sun, 31 January 2016, 13:56:19
I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).LeandreN's Orange sounds fun to me.
What's the MOQ?
Post by: ccarlitos2 on Sun, 31 January 2016, 13:57:08
Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...
edit: Filled out form :D :thumb:
That GB is soon(trademark).
True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.
-drooling- oh my god... is there an IC thread for this? I already know what I want :o Winkeyless, stepped, split shift.. LeandreN gimme now please and thank you :thumb: :thumb:
Post by: LeandreN on Sun, 31 January 2016, 13:58:08
I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).LeandreN's Orange sounds fun to me.
What's the MOQ?
100 PCBs for a new colour preferably. I can do it by paying a fee and stuff, but i don't want to delay anything because of the colour. Also, i need colours that anyone would buy.
Post by: LeandreN on Sun, 31 January 2016, 13:58:42
Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...
edit: Filled out form :D :thumb:
That GB is soon(trademark).
True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.
-drooling- oh my god... is there an IC thread for this? I already know what I want :o Winkeyless, stepped, split shift.. LeandreN gimme now please and thank you :thumb: :thumb:
Yes there is
https://geekhack.org/index.php?topic=77342.0
Post by: TalkingTree on Sun, 31 January 2016, 14:01:28
i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
Post by: LeandreN on Sun, 31 January 2016, 14:02:15
Aiming for around 60-65. Retail is 70 + shipping + inspection fees.
Stabilisers will be available.
Post by: LeandreN on Sun, 31 January 2016, 14:02:36
i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
Post by: TalkingTree on Sun, 31 January 2016, 14:04:17
Sorry, I didn't make myself clear.i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.
Post by: LeandreN on Sun, 31 January 2016, 14:09:19
Sorry, I didn't make myself clear.i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.
Aha! Thanks. The black one was the most popular one.
Post by: TalkingTree on Sun, 31 January 2016, 14:10:07
You got yourself your first candidate colour.Sorry, I didn't make myself clear.i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.
Aha! Thanks. The black one was the most popular one.
Post by: LeandreN on Sun, 31 January 2016, 14:13:56
You got yourself your first candidate colour.Sorry, I didn't make myself clear.i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.
Aha! Thanks. The black one was the most popular one.
Yup, a pretty boring one too.
Post by: TalkingTree on Sun, 31 January 2016, 14:28:18
Black goes on anything, but I'm really wishing for a LeandreN's Orange.You got yourself your first candidate colour.Sorry, I didn't make myself clear.i need colours that anyone would buy.How did it go with SPRiT's then? It came in black, blue and white.
SPRiT already had those made. Most of the PCBs atleast.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.
Aha! Thanks. The black one was the most popular one.
Yup, a pretty boring one too.
Post by: pichu23 on Sun, 31 January 2016, 14:56:50
I might be in after all! :D
Post by: Zambumon on Sun, 31 January 2016, 15:44:42
I need a board for the Zealios!
Post by: FoC_Tow on Sun, 31 January 2016, 15:58:25
Not a huge fan of the orange & black color combo, but any custom color scheme would be pretty hard to resist tbh!
Would Love to see something like White on Gray, or maybe Purple on Gray!
Purple goes with anything as well if you have some Zealios to go along! :D
On another note, are hhkb style plates still planned?
Acrylic or polycarb hhkb style plates would be really epic to show of dat custom pcb, and make use of the top smd led spots!
Post by: Pinecone on Sun, 31 January 2016, 16:49:35
Post by: Atredl on Sun, 31 January 2016, 19:22:57
I'm just a little worried on how long it would take to get fulfilled. I've only heard about how long he takes to fulfill the regular orders. Even if it takes a while I want one!
Post by: TalkingTree on Mon, 01 February 2016, 05:44:18
(http://i.imgur.com/y9itidP.jpg)
Post by: LeandreN on Mon, 01 February 2016, 05:46:24
This is a black NerD 60 v.1.61 and we're getting a v2.0, but it should us an idea how it looks.Show Image(http://i.imgur.com/y9itidP.jpg)
Thanks !
I will be getting a little custom logo on it also, it seems. Totally unecessery, but why not.
Post by: TalkingTree on Mon, 01 February 2016, 05:49:26
I will be getting a little custom logo on it also, it seems. Totally unecessery, but why not.See to have it on the backside, so I can admire your avatar through a clear case. ;)
Post by: TalkingTree on Mon, 01 February 2016, 05:50:56
Post by: FoC_Tow on Mon, 01 February 2016, 05:54:22
Would a Gray pcb with purple printing even be possible in theory?
Have never seen a gray pcb before, but imagine it to look really sweet.
It's a nice neutral inbeteen as well, since black usually looks way to dark to me personally...
Post by: Dernubenfrieken on Mon, 01 February 2016, 06:12:00
Definitely in for another gon pcb or two!
Not a huge fan of the orange & black color combo, but any custom color scheme would be pretty hard to resist tbh!
Would Love to see something like White on Gray, or maybe Purple on Gray!
Purple goes with anything as well if you have some Zealios to go along! :D
On another note, are hhkb style plates still planned?
Acrylic or polycarb hhkb style plates would be really epic to show of dat custom pcb, and make use of the top smd led spots!
I wrote white in the form, but white with purple would be a great choice too IMO.
Post by: LeandreN on Mon, 01 February 2016, 06:26:02
Post by: Lpwl on Mon, 01 February 2016, 07:17:23
If GON can deliver in "a timely manner" then we're living in the best of all possible worlds - haha ;D
Post by: Zambumon on Mon, 01 February 2016, 08:38:56
Ordered a PCB from GON since i have never owned a Nerd60 V.2 before. Just a plain white one. I am going to take some pictures and figure out the GUI so i can assure the quality 100% myself.
Will yours be pre soldered?
Post by: LeandreN on Mon, 01 February 2016, 08:45:54
Yes.Ordered a PCB from GON since i have never owned a Nerd60 V.2 before. Just a plain white one. I am going to take some pictures and figure out the GUI so i can assure the quality 100% myself.
Will yours be pre soldered?
Post by: Vittra on Mon, 01 February 2016, 08:53:54
Not going to lie, GON sounds incredibly busy to the point that I am curious at what the actual lead time for this would be.
Post by: toneman77 on Mon, 01 February 2016, 09:12:28
Post by: swimmingbird on Mon, 01 February 2016, 09:16:59
If so that seems incredibly cheap
Post by: LeandreN on Mon, 01 February 2016, 09:21:52
Post by: chilldude_22 on Mon, 01 February 2016, 10:19:34
Post by: bloodl1n3 on Mon, 01 February 2016, 10:26:24
Interested in the case that will be available. Is it one that's been produced before or will it be a new custom one?
Post by: LeandreN on Mon, 01 February 2016, 10:31:01
Haven't even completed my build from round 3, but have always wanted a GON.Most likely no case. It would have been a new designed layered case.
Interested in the case that will be available. Is it one that's been produced before or will it be a new custom one?
Post by: pichu23 on Mon, 01 February 2016, 14:16:18
Big time in for a black Gon PCB. Looking for one to put in my Gon Crystal housing. :thumb:
I just want a black PCB from GON. :) :)
Got a white one on my FaceW and on my NerD TKL.
Post by: TalkingTree on Mon, 01 February 2016, 14:21:16
Post by: pichu23 on Mon, 01 February 2016, 14:25:08
Post by: LeandreN on Mon, 01 February 2016, 14:26:20
LeandreN, will you be offering universal plates or just the HHKB style plates for this run?Universal with this. hHKB and Winkeyless in an earlier round or together with this
Post by: pichu23 on Mon, 01 February 2016, 14:30:12
LeandreN, will you be offering universal plates or just the HHKB style plates for this run?Universal with this. hHKB and Winkeyless in an earlier round or together with this
Sweet! Thanks for organising it and making it happen :)
Post by: FoC_Tow on Mon, 01 February 2016, 15:24:36
LeandreN, will you be offering universal plates or just the HHKB style plates for this run?Universal with this. hHKB and Winkeyless in an earlier round or together with this
hhkp plates! F**k Yeah!
Any chance for something acrylic?
(Since gon's pcb supports top mounted smd leds?)
Post by: Dernubenfrieken on Mon, 01 February 2016, 17:09:10
LeandreN, will you be offering universal plates or just the HHKB style plates for this run?Universal with this. hHKB and Winkeyless in an earlier round or together with this
hhkp plates! F**k Yeah!
Any chance for something acrylic?
(Since gon's pcb supports top mounted smd leds?)
I would also be interested in acrylic plates.
Post by: LXXXIX on Tue, 02 February 2016, 07:00:47
Also, I wish this was a TKL PCB + Aluminum plates. :(
Post by: LeandreN on Wed, 03 February 2016, 05:20:03
Orange PCB with 50 MOQ
Black PCB with 50 MOQ.
Will have a custom LeandreN silkscreen, because why not?
GON has promised me several times that the orders will go fast, because they don't require his assembly. Some more questions will be asked.
So we will have one neutral black colour for those that are not interested in flashy colours, and we will have the signature orange PCB.
Looks like the price is going to be around 60$ now.
Let me know if you have any questions.
Post by: FoC_Tow on Wed, 03 February 2016, 05:44:29
Not a big fan of orange either, so if it stays like this my wallet is safe.
Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)
Post by: LeandreN on Wed, 03 February 2016, 05:47:40
Why does it have to be a boring standard black? =/
Not a big fan of orange either, so if it stays like this my wallet is safe.
Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)
Hi!
Normally PCBs only give you one choice, like in my round 3 GB with white Winkeyless PCBs. I thought I was safe with two colours. One boring plain PCB and one cool orange PCB. In the end, you doesn't even see the PCB. A grey PCB would require another custom colour fee.
Sorry, I can't please everyone, glad that your wallet is safe :P
Post by: FoC_Tow on Wed, 03 February 2016, 05:59:27
Why does it have to be a boring standard black? =/
Not a big fan of orange either, so if it stays like this my wallet is safe.
Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)
Hi!
Normally PCBs only give you one choice, like in my round 3 GB with white Winkeyless PCBs. I thought I was safe with two colours. One boring plain PCB and one cool orange PCB. In the end, you doesn't even see the PCB. A grey PCB would require another custom colour fee.
Sorry, I can't please everyone, glad that your wallet is safe :P
I know gon's pcbs usually come in black or white.
After all I currently have a white nerd 60 pcb and crystal case here to build, in which btw you actually would see the pcb.
(Also planning on getting some acrylic hhkb plates cut which would also show parts of it at least on a standard case)
I still think gray would have sparked more interest, but I didn't consider custom color fees.
Will the additional cost be split on both colors or will black be cheaper then orange?
If so what happens when black doesn't reach moq?
I understand that you can't please anyone tho! And even tho I really wished for an epic custom gon, its also kind of nice to save on funds for once.
Post by: amharris on Wed, 03 February 2016, 07:41:22
I also added to the form, my interest in seeing lubricant added as an optional part of the potential GB, as it's difficult to get a hold of any suitable lubricant in the UK, with ease, let alone the most preferable options.
Post by: chilldude_22 on Wed, 03 February 2016, 10:35:09
Okay updates.
Will have a custom LeandreN silkscreen, because why not?
Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).
If you're accepting feedback, I'd scrap the personal logo or keep it small.
Post by: LeandreN on Wed, 03 February 2016, 10:35:51
It is very small :)Okay updates.
Will have a custom LeandreN silkscreen, because why not?
Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).
If you're accepting feedback, I'd scrap the personal logo or keep it small.
Post by: chilldude_22 on Wed, 03 February 2016, 10:36:58
It is very small :)Okay updates.
Will have a custom LeandreN silkscreen, because why not?
Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).
If you're accepting feedback, I'd scrap the personal logo or keep it small.
Great news! Thanks for the prompt response. Consider me all-in for a PCB or two.
Post by: TalkingTree on Wed, 03 February 2016, 14:15:44
Orange PCB with 50 MOQI'm in for both.
Black PCB with 50 MOQ.
Post by: ccarlitos2 on Wed, 03 February 2016, 14:21:51
Post by: LeandreN on Wed, 03 February 2016, 14:22:45
I'll be in for a PCB and the winkeyless plate from your other GB :) will the stabilizers from this GB work with that plate?Yes. PCB mounted stabilisers all the way.
Post by: ccarlitos2 on Wed, 03 February 2016, 14:23:43
I'll be in for a PCB and the winkeyless plate from your other GB :) will the stabilizers from this GB work with that plate?Yes. PCB mounted stabilisers ask the way.
Awesome :D thanks for the fast reply! Good luck with the GB :)
Post by: LeandreN on Wed, 03 February 2016, 14:24:16
Thanks!!I'll be in for a PCB and the winkeyless plate from your other GB :) will the stabilizers from this GB work with that plate?Yes. PCB mounted stabilisers ask the way.
Awesome :D thanks for the fast reply! Good luck with the GB :)
Post by: trenzafeeds on Wed, 03 February 2016, 17:34:26
Post by: Pinecone on Thu, 04 February 2016, 03:11:12
Orange PCB with 50 MOQ
This + your orange plate + orange case or acrylic w/ orange LEDs + SA carbon orange alphas = YES
Count me in :cool:
Post by: Numpy on Fri, 05 February 2016, 02:46:23
Was lucky enough to be part of his round 3 version and Leandre is super duper friendly and responsive.
GB went smoothly and efficiently.
He accidentally missed a stabiliser wire in my order and promptly sent me another without any shipping cost.
I r8 88/8
Post by: toneman77 on Fri, 05 February 2016, 06:14:00
Post by: xondat on Fri, 05 February 2016, 06:15:16
Post by: Lpwl on Fri, 05 February 2016, 15:58:11
In case my question got buried... Anyone knows if there is a way to flash the PCB under Linux? the Nerdy Gui looks like windows only...
This thread (https://geekhack.org/index.php?topic=76423.msg1966055#msg1966055) might help you on this specific subject (GON PCBs & Linux).
Post by: pichu23 on Fri, 05 February 2016, 19:00:28
Post by: chilldude_22 on Fri, 05 February 2016, 21:34:19
Post by: LeandreN on Sat, 06 February 2016, 02:14:11
LeandreN, will the universal plate require an IC like the winkeyless, hhkb ones or would it be a gb straight together with the pcbs?
The universal plates are already known. They will not require an IC.
Post by: skaloola on Sat, 06 February 2016, 06:10:56
Post by: pichu23 on Sat, 06 February 2016, 08:30:20
LeandreN, will the universal plate require an IC like the winkeyless, hhkb ones or would it be a gb straight together with the pcbs?
The universal plates are already known. They will not require an IC.
:thumb:
Post by: FoC_Tow on Sat, 06 February 2016, 11:00:55
anyway to use RGB side leds on gons pcbs?
I don't think thats possible unfortunately skaloola. RGB leds require a controller, additional leads and compatible firmware.
Gon's pcbs have other advantages tho like the possibility to use smd leds on top of the pcb, an additional bluetooth module, and the overall top notch quality of gon's parts!
Post by: axtran on Mon, 08 February 2016, 01:08:50
Post by: LeandreN on Mon, 08 February 2016, 10:38:47
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.
(http://i.imgur.com/GH5EO8V.jpg)
Thickness is good. Looks like it's 1,5cm.
(http://i.imgur.com/n4JAxw2.jpg)
Well soldered controller parts.
(http://i.imgur.com/GcJen3z.jpg)
Solid sockets and well mounted diodes.
(http://i.imgur.com/1jsvttb.jpg)
Great PCB, I will do some firmware testing and case fitting.
Post by: ccarlitos2 on Mon, 08 February 2016, 12:22:38
Hi, the sample PCB arrived today.
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.Show Image(http://i.imgur.com/GH5EO8V.jpg)
Thickness is good. Looks like it's 1,5cm.Show Image(http://i.imgur.com/n4JAxw2.jpg)
Well soldered controller parts.Show Image(http://i.imgur.com/GcJen3z.jpg)
Solid sockets and well mounted diodes.Show Image(http://i.imgur.com/1jsvttb.jpg)
Great PCB, I will do some firmware testing and case fitting.
Looking good :)
Post by: lashiel on Mon, 08 February 2016, 17:21:43
Post by: pichu23 on Mon, 08 February 2016, 17:29:04
Hi, the sample PCB arrived today.
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.Show Image(http://i.imgur.com/GH5EO8V.jpg)
Thickness is good. Looks like it's 1,5cm.Show Image(http://i.imgur.com/n4JAxw2.jpg)
Well soldered controller parts.Show Image(http://i.imgur.com/GcJen3z.jpg)
Solid sockets and well mounted diodes.Show Image(http://i.imgur.com/1jsvttb.jpg)
Great PCB, I will do some firmware testing and case fitting.
GON's pcb is the bomb. NerD UI is so user friendly :)
Post by: Kalp1 on Mon, 08 February 2016, 17:54:18
Post by: pichu23 on Mon, 08 February 2016, 18:19:53
Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?
Do you have a picture of it?
I'm putting mine in one of these alu case:
(http://i.imgur.com/F1mExc2.jpg)
Got them from Pexon awhile back. :)
Post by: Kalp1 on Mon, 08 February 2016, 18:35:44
Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?
Do you have a picture of it?
(http://g04.a.alicdn.com/kf/HTB1udcRHVXXXXaHXVXXq6xXFXXXV/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60.jpg_640x640.jpg)
(http://g04.a.alicdn.com/kf/HTB1zfQPKVXXXXaPXVXXq6xXFXXXB/Clear-poker-case-transparent-case-compact-GH60-plastic-Case-60-Mechanical-Keyboard-gh-60-Poker2-Faceu.jpg_640x640.jpg)
It really looks cheap but it is a good start. Nice black alu case by the way.
Post by: pichu23 on Mon, 08 February 2016, 18:43:29
Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?
Do you have a picture of it?Show Image(http://g04.a.alicdn.com/kf/HTB1udcRHVXXXXaHXVXXq6xXFXXXV/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60.jpg_640x640.jpg)Show Image(http://g04.a.alicdn.com/kf/HTB1zfQPKVXXXXaPXVXXq6xXFXXXB/Clear-poker-case-transparent-case-compact-GH60-plastic-Case-60-Mechanical-Keyboard-gh-60-Poker2-Faceu.jpg_640x640.jpg)
It really looks cheap but it is a good start. Nice black alu case by the way.
Ah, those are Poker plastic cases that usually comes with the keyboards.
Mine is literally the same just that it is aluminium.
Don't worry, the all clear one seems pretty decent if you're planning on blinging your board. :)
Post by: lashiel on Mon, 08 February 2016, 19:46:25
Post by: pichu23 on Mon, 08 February 2016, 20:19:02
FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Post by: Kalp1 on Tue, 09 February 2016, 04:13:13
FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Thank you for your informative answer.
Post by: Jumie on Tue, 09 February 2016, 07:27:50
FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Thank you for your informative answer.
The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.
Post by: pichu23 on Tue, 09 February 2016, 08:34:58
FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Thank you for your informative answer.
The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.
I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.
Post by: Brammm87 on Tue, 09 February 2016, 16:43:54
Post by: Kalp1 on Tue, 09 February 2016, 17:45:53
FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Thank you for your informative answer.
The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.
I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.
Yes, i'll go with smd leds, but finally I prefer to put more $$ in a frosted acrylic case like Tex CNC or Dulphin's (if he still have some)
Post by: pichu23 on Tue, 09 February 2016, 18:02:21
The TEX acrylic case is a good choice. Looks elegant with smd LEDs.FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)
Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb. :))
Thank you for your informative answer.
The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.
I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.
Yes, i'll go with smd leds, but finally I prefer to put more $$ in a frosted acrylic case like Tex CNC or Dulphin's (if he still have some)
Post by: mastermachetier on Wed, 10 February 2016, 17:04:04
Post by: TalkingTree on Thu, 11 February 2016, 03:54:28
Do you need a plate with these pcbs?No but a plate would increase stability and give you a better overall feel.
does this pcb only accept cherry switches ?Cherry and Cherry clones. ALPS switches have a different pins position.
Post by: LeandreN on Thu, 11 February 2016, 08:02:24
This GB will not delay any orders in GONs workshop.
Post by: Liam on Thu, 11 February 2016, 12:23:49
Post by: LeandreN on Thu, 11 February 2016, 12:24:43
This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
Post by: Liam on Thu, 11 February 2016, 12:29:15
This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
Done to me
Post by: LeandreN on Thu, 11 February 2016, 12:31:34
This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
Done to me
I do appericate your input anyway. Thanks.
Post by: axtran on Thu, 11 February 2016, 12:50:47
Post by: TalkingTree on Thu, 11 February 2016, 15:35:08
Black or orange. No white option.I'll definetely get one of each, eventually a third PCB.
Post by: LeandreN on Thu, 11 February 2016, 15:37:50
Black or orange. No white option.I'll definetely get one of each, eventually a third PCB.
You need them all :D
Post by: LeandreN on Thu, 11 February 2016, 15:38:08
Best GB leader I've been a buyer for :) Highly anticipating where this GB is going :)
Thanks a lot Axtran!
Post by: Pinecone on Thu, 11 February 2016, 15:43:28
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?
Post by: LeandreN on Thu, 11 February 2016, 15:47:18
Can't wait for this to launch! Been wanting a GoN for a while now :D
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?
You will need to source your own cases. This is running the traditional PCB, stabilisers and plates style. I like to keep GBs as fast and simple as possible.
Post by: Pinecone on Thu, 11 February 2016, 15:58:01
Can't wait for this to launch! Been wanting a GoN for a while now :D
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?
You will need to source your own cases. This is running the traditional PCB, stabilisers and plates style. I like to keep GBs as fast and simple as possible.
Understandable, thanks for the fast reply! Looks like I got some dremeling to do on the TEX case people mentioned on the last page of comments :)
Post by: TalkingTree on Thu, 11 February 2016, 17:40:31
Post by: ccarlitos2 on Thu, 11 February 2016, 18:55:03
Post by: feediko on Thu, 11 February 2016, 19:19:58
Anyone knows if it would fit a stock pok3r aluminium case?
Post by: Ephemeral on Thu, 11 February 2016, 21:54:44
Post by: axtran on Thu, 11 February 2016, 22:39:10
Has anyone tried this PCB with one of Ziptyze's z-cases?
Ziptyze states that it fits. I soldered on all Side LEDs on my old one and it had clearance issues.
Post by: axtran on Thu, 11 February 2016, 22:39:53
In for 1 or 2 PCBs + plates aswell.
Anyone knows if it would fit a stock pok3r aluminium case?
Yes, if you do not solder on Side LEDs. No if you do.
Post by: TalkingTree on Fri, 12 February 2016, 07:01:58
Thank you too mate. :thumb:
Post by: LeandreN on Fri, 12 February 2016, 07:09:05
Show Image(http://i.imgur.com/aExDLua.jpg)
Thank you too mate. :thumb:
You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.
Post by: TalkingTree on Fri, 12 February 2016, 07:12:16
It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.Show Image(http://i.imgur.com/aExDLua.jpg)
Thank you too mate. :thumb:
You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.
I'm intrigued, how many others got this present?
Post by: LeandreN on Fri, 12 February 2016, 07:24:29
I gave one away in a mechmarket package I sent a while back and skiwithpete has one.It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.Show Image(http://i.imgur.com/aExDLua.jpg)
Thank you too mate. :thumb:
You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.
I'm intrigued, how many others got this present?
Post by: TalkingTree on Fri, 12 February 2016, 07:28:33
Cool. Thanks again. ;DI gave one away in a mechmarket package I sent a while back and skiwithpete has one.It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.Show Image(http://i.imgur.com/aExDLua.jpg)
Thank you too mate. :thumb:
You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.
I'm intrigued, how many others got this present?
Post by: DALExSNAIL on Fri, 12 February 2016, 14:54:12
Post by: W_hinklebottom on Fri, 12 February 2016, 15:10:00
Post by: TalkingTree on Fri, 12 February 2016, 15:12:03
I could make this into a HHKB layout correct?There's a group buy for HHKB plates, also run by LeandreN.
Does GON sell just plates?PCBs and accessories too.
You can combine GON PCB and HHKB-like plate (more info here (https://geekhack.org/index.php?topic=79315.0;topicseen)) to achieve your goal.
Post by: W_hinklebottom on Fri, 12 February 2016, 15:16:58
I could make this into a HHKB layout correct?There's a group buy for HHKB plates, also run by LeandreN.Does GON sell just plates?PCBs and accessories too.
You can combine GON PCB and HHKB-like plate (more info here (https://geekhack.org/index.php?topic=79315.0;topicseen)) to achieve your goal.
Found the other Group buy now I am really excited :p
Post by: LeandreN on Sat, 13 February 2016, 09:36:07
Post by: TalkingTree on Sat, 13 February 2016, 10:01:50
LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.
Post by: LeandreN on Sat, 13 February 2016, 10:03:08
He is busy upgrading the PCB. I doubt itLeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.
Post by: TalkingTree on Sat, 13 February 2016, 10:03:54
Alright, thanks anyway.He is busy upgrading the PCB. I doubt itLeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.
Post by: LeandreN on Sat, 13 February 2016, 10:06:42
Post by: Vittra on Sat, 13 February 2016, 11:41:59
Post by: DALExSNAIL on Sat, 13 February 2016, 13:45:32
He is busy upgrading the PCB. I doubt itLeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.
What about an orange TKL pcb? :D
Post by: pichu23 on Sat, 13 February 2016, 21:03:41
This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
What option is this for again?
The pcb colour?
Post by: Liam on Sat, 13 February 2016, 21:41:36
Hope he continues with white :( If he doesn't maybe I have to go with orange anyway.This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
What option is this for again?
The pcb colour?
Post by: TalkingTree on Sun, 14 February 2016, 02:53:53
PCB indeed.This gb come black n orange only or it still have the solid white one?Black or orange. No white option.
What option is this for again?
The pcb colour?
Post by: grav3serker on Sun, 14 February 2016, 14:06:44
Post by: flopix on Mon, 15 February 2016, 03:37:50
Post by: azhdar on Mon, 15 February 2016, 04:40:31
Post by: megaforce on Mon, 15 February 2016, 17:17:06
Post by: LeandreN on Tue, 16 February 2016, 12:00:09
White on the black PCB and black on the orange PCB.
Post by: pichu23 on Tue, 16 February 2016, 18:49:23
Show Image(http://i.imgur.com/Cvmyr2y.jpg)
White on the black PCB and black on the orange PCB.
Is the logo confirmed to be silk screened to the pcb?
Too cute! ^______^
I'm down for a white on black pcb!
Post by: Atredl on Wed, 17 February 2016, 11:01:56
Obviously, I don't plan on using the bottom mounted LED's.
Post by: pichu23 on Wed, 17 February 2016, 11:54:11
Will this PCB fit in a TEX Aluminum?
Obviously, I don't plan on using the bottom mounted LED's.
The render posted by Leandren seems to show that the holes for screw would match the poker ones.
So assuming the TEX case uses the standard poker layout screws, it should be fine.
Post by: Jumie on Sun, 21 February 2016, 02:40:21
Post by: Atredl on Mon, 22 February 2016, 02:31:00
Will this PCB fit in a TEX Aluminum?
Obviously, I don't plan on using the bottom mounted LED's.
The render posted by Leandren seems to show that the holes for screw would match the poker ones.
So assuming the TEX case uses the standard poker layout screws, it should be fine.
It uses the Poker screw hole layout but I was more worried about things like the ridges on the case getting in the way of things like the controller.
I have no problem using a dremel on my acrylic TEX but I would rather leave my Aluminum TEX pretty if possible. (Inside and out :)))
Post by: axtran on Mon, 22 February 2016, 06:21:54
Post by: Bumbibear on Mon, 22 February 2016, 10:08:25
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?
Post by: axtran on Mon, 22 February 2016, 10:13:04
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?
Find any case without ridges, really. The MassDrop cast aluminum cases work, or the cases on Amazon right now also work (I think they're called iQunix Lambo cases).
Post by: chilldude_22 on Mon, 22 February 2016, 10:14:32
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.
Post by: Bumbibear on Mon, 22 February 2016, 10:18:02
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?
Find any case without ridges, really. The MassDrop cast aluminum cases work, or the cases on Amazon right now also work (I think they're called iQunix Lambo cases).
Sweet! Found this one: http://dro.ps/b/eBi1m6F
Thank you! :)
Post by: pichu23 on Mon, 22 February 2016, 13:45:47
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.
Yeah, what he said. As long as there is not smd leds at the bottom, it should fit the alu case just fine :D
Post by: axtran on Mon, 22 February 2016, 14:07:30
Post by: pichu23 on Mon, 22 February 2016, 14:31:08
All I'm saying is why buy GON PCB of you don't go all rainbow lightshow?
Already have a NerD TKL with an acrylic case for that ;)
The 60% would be for something else :)
Post by: Chewypost on Mon, 22 February 2016, 22:08:53
Post by: Pinecone on Tue, 23 February 2016, 01:04:59
Post by: Ludovician on Tue, 23 February 2016, 01:26:20
Would 65% ever be an option? :0
Have you checked out the Clueboard?
Post by: axtran on Tue, 23 February 2016, 05:49:26
What SMD LED size would best fit the PCB?
1206 SMD.
Post by: Atredl on Wed, 24 February 2016, 00:23:29
GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.
I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.
This is exactly what I needed to hear :D Count me in for a PCB in black :thumb:
Post by: Chewypost on Wed, 24 February 2016, 12:39:41
Would 65% ever be an option? :0
Have you checked out the Clueboard?
I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.
(http://i.imgur.com/iEx1cSE.jpg).
I've seen some Korean boards like this, but wanted to see if other places had it too.
Post by: eksuen on Wed, 24 February 2016, 13:23:20
Would 65% ever be an option? :0
Have you checked out the Clueboard?
I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.Show Image(http://i.imgur.com/iEx1cSE.jpg).
I've seen some Korean boards like this, but wanted to see if other places had it too.
https://geekhack.org/index.php?topic=77434.0;topicseen
The buy already ran on Massdrop, but you may be able to pick one up second-hand.
Post by: Chewypost on Wed, 24 February 2016, 13:52:16
Would 65% ever be an option? :0
Have you checked out the Clueboard?
I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.Show Image(http://i.imgur.com/iEx1cSE.jpg).
I've seen some Korean boards like this, but wanted to see if other places had it too.
https://geekhack.org/index.php?topic=77434.0;topicseen
The buy already ran on Massdrop, but you may be able to pick one up second-hand.
Yah I saw that too. Looks beautiful and form is just what I wanted. I'm just looking into whether or not I can make a custom case for it and add some LED for the switches and for some underglow (rgb underglow).
Post by: The_Skynacho on Wed, 24 February 2016, 16:21:26
[Edited for clarity]
Post by: grav3serker on Wed, 24 February 2016, 20:41:20
Post by: chilldude_22 on Wed, 24 February 2016, 21:09:12
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?
No, they won't work. Resistors and diodes will be pre-soldered if I remember right.
Post by: grav3serker on Wed, 24 February 2016, 21:16:36
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?
No, they won't work. Resistors and diodes will be pre-soldered if I remember right.
So what LEDs can I use for the bottom? The SMDs from GON?
Post by: chilldude_22 on Wed, 24 February 2016, 21:18:02
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?
No, they won't work. Resistors and diodes will be pre-soldered if I remember right.
So what LEDs can I use for the bottom? The SMDs from GON?
Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.
Post by: grav3serker on Wed, 24 February 2016, 21:19:24
Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?
No, they won't work. Resistors and diodes will be pre-soldered if I remember right.
So what LEDs can I use for the bottom? The SMDs from GON?
Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.
Thanks a bunch!
Post by: Fullcream on Thu, 25 February 2016, 06:09:53
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?
Post by: Jumie on Thu, 25 February 2016, 06:24:36
Hello, I'm sorry that I don't know anything. All I want to do is buy parts to build a hhkb layout board and want to be able to put LEDs through the switches and in to the pcb.
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?
You are.. Stay tune
Post by: Fullcream on Thu, 25 February 2016, 06:30:24
Post by: LeandreN on Fri, 26 February 2016, 04:03:13
LeandreN
Post by: TalkingTree on Fri, 26 February 2016, 05:11:28
Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?
Post by: LeandreN on Fri, 26 February 2016, 05:13:34
Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?
No ETA yet. Need the samples and then shortly after, the GB will start.
I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.
Post by: TalkingTree on Fri, 26 February 2016, 05:14:18
I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.Yeah, that looks like the safest and easiest way.
Post by: endeavour90 on Fri, 26 February 2016, 07:24:43
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me :D.
Post by: LeandreN on Fri, 26 February 2016, 07:27:13
Hi, I am new to custom keyboard.The software is Windows only. I checked this up for someone a couple of weeks ago. Unfortunate for for people who use OSX exclusively.
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me :D.
Post by: LeandreN on Mon, 29 February 2016, 12:44:53
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
Post by: grav3serker on Mon, 29 February 2016, 13:01:10
jump over hereWe'll be able to buy just plates still, right?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
Post by: LeandreN on Mon, 29 February 2016, 13:15:13
Yesjump over hereWe'll be able to buy just plates still, right?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
Post by: TalkingTree on Mon, 29 February 2016, 14:21:04
jump over hereThe form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
Post by: LeandreN on Mon, 29 February 2016, 14:24:59
jump over hereThe form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The submissions will be deleted. I will message everyone that entered.
Post by: TalkingTree on Mon, 29 February 2016, 14:29:23
Roger that. Will the new form include orders for PCBs and universal plates as well?jump over hereThe form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The submissions will be deleted. I will message everyone that entered.
Post by: LeandreN on Mon, 29 February 2016, 14:30:44
CorrectRoger that. Will the new form include orders for PCBs and universal plates as well?jump over hereThe form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The submissions will be deleted. I will message everyone that entered.
Post by: TalkingTree on Mon, 29 February 2016, 14:33:32
You're mighty awesome, as always.CorrectRoger that. Will the new form include orders for PCBs and universal plates as well?jump over hereThe form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?
https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225
The submissions will be deleted. I will message everyone that entered.
Post by: bnthor on Tue, 01 March 2016, 06:29:12
OR even two of both... In that case one of the plates would be Red.
Post by: LeandreN on Tue, 01 March 2016, 06:30:37
I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.
Of course. ISO is the only layout!
I'm nice to include ANSI support.
Post by: bnthor on Tue, 01 March 2016, 09:09:39
I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.
Of course. ISO is the only layout!
I'm nice to include ANSI support.
haha Great ;) then I'm definitely in !
Post by: bnthor on Tue, 01 March 2016, 09:29:35
- Poker/ Poker X/ Poker 2
- GH60
- Pure/ Pure Pro
- Ducky Mini (MK1 only)
- V60 (with 3 screws affixed)
(https://cdn.shopify.com/s/files/1/0651/0379/products/CNC-Gold_large.JPG?v=1443276634)
Post by: pichu23 on Tue, 01 March 2016, 12:09:34
Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with
- Poker/ Poker X/ Poker 2
- GH60
- Pure/ Pure Pro
- Ducky Mini (MK1 only)
- V60 (with 3 screws affixed)
Show Image(https://cdn.shopify.com/s/files/1/0651/0379/products/CNC-Gold_large.JPG?v=1443276634)
It will work only if you're not soldering the smd leds but other than that, should be fine.
Post by: bnthor on Tue, 01 March 2016, 12:36:46
Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with
- Poker/ Poker X/ Poker 2
- GH60
- Pure/ Pure Pro
- Ducky Mini (MK1 only)
- V60 (with 3 screws affixed)
Show Image(https://cdn.shopify.com/s/files/1/0651/0379/products/CNC-Gold_large.JPG?v=1443276634)
It will work only if you're not soldering the smd leds but other than that, should be fine.
THX!