geekhack
geekhack Community => Keyboards => Topic started by: bocahgundul on Fri, 05 February 2016, 09:18:30
-
Can anybody help me with digilog screws? I could'nt find it anywhere I do manage to find 4 of them but the bottom part just doesn't want to be screwed
Can someone help me? like in this videos :
-
anyone? please help me :'(
-
It looks like the hole is stripped if the screw is intact. That really isn't good.
Are you sure the screws are the proper ones?
-
It looks like the hole is stripped if the screw is intact. That really isn't good.
Are you sure the screws are the proper ones?
The screw on the top can be screwed nicely and fit tight but the bottom part just doesn't want to be screwed at all Its not stripped btw I think it just need a longer ones to reach the end can someone with digilog case help me?
-
It looks like the hole is stripped if the screw is intact. That really isn't good.
Are you sure the screws are the proper ones?
The screw on the top can be screwed nicely and fit tight but the bottom part just doesn't want to be screwed at all Its not stripped btw I think it just need a longer ones to reach the end can someone with digilog case help me?
Are the screws you have on the top the same as the bottom? If they are then they could be stripped because the screws should be the same.
-
It looks like the hole is stripped if the screw is intact. That really isn't good.
Are you sure the screws are the proper ones?
The screw on the top can be screwed nicely and fit tight but the bottom part just doesn't want to be screwed at all Its not stripped btw I think it just need a longer ones to reach the end can someone with digilog case help me?
Are the screws you have on the top the same as the bottom? If they are then they could be stripped because the screws should be the same.
yep its the same one :'(
-
It looks like the hole is stripped if the screw is intact. That really isn't good.
Are you sure the screws are the proper ones?
The screw on the top can be screwed nicely and fit tight but the bottom part just doesn't want to be screwed at all Its not stripped btw I think it just need a longer ones to reach the end can someone with digilog case help me?
Are the screws you have on the top the same as the bottom? If they are then they could be stripped because the screws should be the same.
yep its the same one :'(
I would try to find someone who had or has a Digilog case and ask first about the screws.
If worse comes to worse, email the seller and try to get a refund or see if you can retool the screw holes and then re-anodize the case.
-
I check the hole and the bottom are deeper than the top ones
-
those don't look like the correct screws?
-
those don't look like the correct screws?
skcheng coming in to save the day!
-
those don't look like the correct screws?
HI SKCHENG. GLAD TO SEE YOU AROUND AGAIN <3
-
those don't look like the correct screws?
Can you help me get a correct screws?
-
Anyone?
-
Try to bring it to your local hardware store
pretty sure they've the correct screws for you,
if it fits, at first don't screw it all the way down to see how long you need and you can cut it after to adjust
-
over the wknd, I'll take mine apart and measure the screws
-
Try a #5 screw 22mm or 7/8" in length and a 1/4" head.
Epzy asked me once what the measurements for these screws were and that's what I sent him.
He hasn't replied back with an angry PM so there's a chance that those are the correct measurements.
But you should probably wait for skcheng to give you what he finds.
-
over the wknd, I'll take mine apart and measure the screws
Thank you bro I'll wait
Try to bring it to your local hardware store
pretty sure they've the correct screws for you,
if it fits, at first don't screw it all the way down to see how long you need and you can cut it after to adjust
Ace hardware doesn't have a screw that fit :'(
Try a #5 screw 22mm or 7/8" in length and a 1/4" head.
Epzy asked me once what the measurements for these screws were and that's what I sent him.
He hasn't replied back with an angry PM so there's a chance that those are the correct measurements.
But you should probably wait for skcheng to give you what he finds.
I got the same screw as epzy but the screw is not long enough to reach the other halves I think it needs a longer one
-
IIRC, these are either M2.5 or M3.0 screws
Do not purchase American standard measurements screws.
-
IIRC, these are either M2.5 or M3.0 screws
Do not purchase American standard measurements screws.
Thank you jalaj! I'll purchase this one and test it out :thumb:
-
goddamn, this man has a digilog case
-
Not ace hardware, smaller shops
They've more stuff that ace. The shop where usually builders go
-
goddamn, this man has a digilog case
Its no big deal bro you could find 1 too
Might probably sell this one too :p
Not ace hardware, smaller shops
They've more stuff that ace. The shop where usually builders go
Thank you jokrik :thumb:
I wish that I'm still at home so I could search for screw
-
Did you find the screws?? If not, next week I'll go buy some at my hardware store and send them to you. Metric M2.5 or M3.0. Can't remember which.
-
I'm sorry for not replying no I don't get the screw but tomorrow I will go to small hardware store where builder usually goes for screw
-
Lemme know if you decide to sell it bro ;)
-
Lemme know if you decide to sell it bro ;)
K mate!
-
Lemme know if you decide to sell it bro ;)
K mate!
:-*
-
My bad everyone :'(
-
second day now I'm going to go to the hardware store to get the screw
should start a daily vlog at this point right? that's how the internet works trust me
-
second day now I'm going to go to the hardware store to get the screw
should start a daily vlog at this point right? that's how the internet works trust me
i'm sorry I'm gonna remove the post :'(
-
second day now I'm going to go to the hardware store to get the screw
should start a daily vlog at this point right? that's how the internet works trust me
i'm sorry I'm gonna remove the post :'(
boooooo
why?
-
Finnaly got a screw that fits the board now what I need is to lock this thread how can I lock thread?
and really thank you everybody for the help!
-
No need to lock it, just let it die!
-
Or tell us what screw you used first.
-
Or tell us what screw you used first.
oh yeah I don't know what kind of screw that I use I just go to the small builder shops and tell them I need a screw for this thing and voila its done.