Will the PCB come with Diodes/Resistors/Controller presoldered?
Count me in.
love the assembling service.
gonna join it when I decided the color :thumb:
Looks pretty sweet, what are the layout options of the plate?
The one in the picture looks like no ISO support. That would be a bummer for me.
I really like the simplicity of this. Will the plate support switch top removal?
No LED like octogon case?
What exactly do you mean when you write assembly? Is it just diodes/resistors that Winkeyless does or will it mean a full keyboard without keycaps?
Holy ****, trying to scrounge together the money for this right now. Only request: could we see the possible layouts (visualization like with keyboard-layout-editor)? It looks like standard 75% ANSI, but the bottom row seems to have some different possibilities.
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
Holy ****, trying to scrounge together the money for this right now. Only request: could we see the possible layouts (visualization like with keyboard-layout-editor)? It looks like standard 75% ANSI, but the bottom row seems to have some different possibilities.
From the look of it, the bottom row options are as follows:
Winkey
1.25 1.25 1.25 6.25 1 1 1
1.25 1.25 1.25 6.25 1.5 1.5
WKL
1.5 1.5 7 1 1 1
1.5 1.5 7 1.5 1.5
Basically, either 6.25 or 7u spacebar available, with 3x1.25u mods (6.25 spacebar) and 2x1.5u mods (7u spacebar) to the left, and on the right it's either 2x1.5u or 3x1u. I am not 100% sure if there's 6u spacebar support, but I don't think it's possible with this PCB from WKL.
From the plate, it doesn't look like split left shift (1.25u+1u) or full right shift (2.75u) is available, in other words, it's ANSI only, with 1.75u Right Shift. Both centre and stepped Capslock appears to be supported.
Amazing anode quality. :)
I'm in.
And does the plate support ISO yes or no?
Looks pretty sweet, what are the layout options of the plate?Only 1 option as seen in the picture :)
The one in the picture looks like no ISO support. That would be a bummer for me.
And does the plate support ISO yes or no?Plate on the pictures has no ISO support and the GB runner claims that's the only option. I'm keeping my hands off of this unless ISO support is confirmed. Would be a shame, there's 75% ISO plates around ...
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Interested in this as well. Is the acrylic case 75% or from the previous 60% group buy?
Looks amazing! Count me in!
Does the PCB allow for LEDs?
And does the plate support ISO yes or no?
Does this GB PCB have the same features as the WKL mini PCB?
The main feature I'm looking for is the controllers: ps2avrGB for PCB, and Attiny85 for RGB LED on back of the PCB.
Since its an alu case GB, I assume LED parts are not included, but does it have support for the same RGB controller and LEDs used in standard WKL boards?
Looks pretty sweet, what are the layout options of the plate?Only 1 option as seen in the picture :)
The one in the picture looks like no ISO support. That would be a bummer for me.And does the plate support ISO yes or no?Plate on the pictures has no ISO support and the GB runner claims that's the only option. I'm keeping my hands off of this unless ISO support is confirmed. Would be a shame, there's 75% ISO plates around ...
There is no ISO. I will still grab one, can't resist that 75% factor!
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Interested in this as well. Is the acrylic case 75% or from the previous 60% group buy?
In for a red one. :D
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Interested in this as well. Is the acrylic case 75% or from the previous 60% group buy?
Still waiting for reply for him :) Look like a lot of ppl like acrylic case as well
If there is 60% one left, I might interested to buy it as well lol.
Does this GB PCB have the same features as the WKL mini PCB?
The main feature I'm looking for is the controllers: ps2avrGB for PCB, and Attiny85 for RGB LED on back of the PCB.
Since its an alu case GB, I assume LED parts are not included, but does it have support for the same RGB controller and LEDs used in standard WKL boards?
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Might be interested in this as well.
Does this GB PCB have the same features as the WKL mini PCB?
The main feature I'm looking for is the controllers: ps2avrGB for PCB, and Attiny85 for RGB LED on back of the PCB.
Since its an alu case GB, I assume LED parts are not included, but does it have support for the same RGB controller and LEDs used in standard WKL boards?
If you read the OP, it clearly says the PCB is from WKL.kr
Does this GB PCB have the same features as the WKL mini PCB?
The main feature I'm looking for is the controllers: ps2avrGB for PCB, and Attiny85 for RGB LED on back of the PCB.
Since its an alu case GB, I assume LED parts are not included, but does it have support for the same RGB controller and LEDs used in standard WKL boards?
Will you be able to offer acrylic case? Really want one of those since PCB offer RGB under grow. Please. Please. Please.
I may have some left in-stock. Let me check and feedback to you later :)
Might be interested in this as well.
Very interested! One question though: This will be my first build and I would like to use zealios switches. It seems that in order to use the Zeal PCB mount switches with a place, the PCB needs to have additional holes to accept non-plate mounted switches. Will the winkeyless.kr PCB accept these type of switches or should I get the plate mount specific switches?Yes, the additional holes for the pcb-mounted switch are there. Most pcbs will have the additional holes. The only common one that doesn't is probably the Phantom.
edit: sorry if this is a noob question!
Thanks for doing this!
Very interested! One question though: This will be my first build and I would like to use zealios switches. It seems that in order to use the Zeal PCB mount switches with a place, the PCB needs to have additional holes to accept non-plate mounted switches. Will the winkeyless.kr PCB accept these type of switches or should I get the plate mount specific switches?Yes, the additional holes for the pcb-mounted switch are there. Most pcbs will have the additional holes. The only common one that doesn't is probably the Phantom.
edit: sorry if this is a noob question!
Thanks for doing this!
Excellent! Hey thanks for your help!No Problem :thumb:
Holy ****, trying to scrounge together the money for this right now. Only request: could we see the possible layouts (visualization like with keyboard-layout-editor)? It looks like standard 75% ANSI, but the bottom row seems to have some different possibilities.
From the look of it, the bottom row options are as follows:
Winkey
1.25 1.25 1.25 6.25 1 1 1
1.25 1.25 1.25 6.25 1.5 1.5
WKL
1.5 1.5 7 1 1 1
1.5 1.5 7 1.5 1.5
Basically, either 6.25 or 7u spacebar available, with 3x1.25u mods (6.25 spacebar) and 2x1.5u mods (7u spacebar) to the left, and on the right it's either 2x1.5u or 3x1u. I am not 100% sure if there's 6u spacebar support, but I don't think it's possible with this PCB from WKL.
From the plate, it doesn't look like split left shift (1.25u+1u) or full right shift (2.75u) is available, in other words, it's ANSI only, with 1.75u Right Shift. Both centre and stepped Capslock appears to be supported.
Ive been looking for a 75% pcb and comparing costs. I was wondering how shipping is calculated for this buy. If I only order the PCB, is it possible to reduce shipping cost?
I'm located in New York, USA.
Apologies in advance for being slow, but I would appreciate some help. What non-standard keycaps, if any, would be needed for this layout? Thank you!
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
that RGB life
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
I really like the simplicity of this. Will the plate support switch top removal?
Holy ****, trying to scrounge together the money for this right now. Only request: could we see the possible layouts (visualization like with keyboard-layout-editor)? It looks like standard 75% ANSI, but the bottom row seems to have some different possibilities.
And does the plate support ISO yes or no?
And does the plate support ISO yes or no?
Plate on the pictures has no ISO support and the GB runner claims that's the only option. I'm keeping my hands off of this unless ISO support is confirmed. Would be a shame, there's 75% ISO plates around ...
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
^^^ What he said.
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
Ya Take my money please
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
i really like your acrylic 60% block case, if you run 75% i will get one for sure :p
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
^^^ What he said.Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
Ya Take my money pleaseFound my 75% Acrylic but not be able to send the pic till tomorrow :) :)
i really like your acrylic 60% block case, if you run 75% i will get one for sure :p
Please check your inbox :thumb:
Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)How many do you have? :)
^^^ What he said.Found my 75% Acrylic but not be able to send the pic till tomorrow :) :)
Ya Take my money pleaseFound my 75% Acrylic but not be able to send the pic till tomorrow :) :)
i really like your acrylic 60% block case, if you run 75% i will get one for sure :p
Please check your inbox :thumb:
So the ISO one supports multiple layouts? Can backspace be split into 2?
Saw this post and just joined GH to get in on it. Hope that's ok. These look awesome!
You didnt reply my pm :'(
PSYCHED! How many orders did we get together?
Yes, sure :D
Yes, sure :D
Ah, too late
Yes, sure :D
Ah, too late
Im still preparing the invoice so if you want to join in, just leave me a pm :D
Invoice paid! :D :thumb:
Invoice paid! :D :thumb:Ditto
Invoice paid! :D :thumb:Ditto
Paid! Can't wait :)
Paid. Please keep us updated. :thumb:
I noticed the standard plate doesn't seem to have these indents most plates have - will this be an issue for having a split backspace?Show Image(http://i.imgur.com/4sdeIbP.png)
Edit: nevermind, I think it's just a bad angle :P
Paid!
Paid!
Sent from my iPhone using Tapatalk
Paid also.
BTW, is there a schedule when it gets send out to us buyers?
Paid also.
BTW, is there a schedule when it gets send out to us buyers?
From the details posted on the OP, looks like ~1.5 months from now... maybe it'll be a Christmas present?
Hopefully not exactly Christmas. Gonna go back home to family for the holidays and I wouldn't want my board to be sitting in the apartment lobby for a week hahaPaid also.
BTW, is there a schedule when it gets send out to us buyers?
From the details posted on the OP, looks like ~1.5 months from now... maybe it'll be a Christmas present?
Paid! (And recieved $10 refund?)
Hey bdtbinh,
Exactly how much clearance there is between the PCB and interior lip of the case near the spacebar?
Paid! I can finally finish my EVA Noctilucous theme!
Have sent a PM about this (but the forum was being odd when I sent it) so let me know if you haven't received anything from me.
Is that everyone? Keep us updated please :D
It looks like the original 60% could have supported a weight insert? Does this support that too?
It looks like the original 60% could have supported a weight insert? Does this support that too?
Did this ever get confirmed?
It looks like the original 60% could have supported a weight insert? Does this support that too?
Did this ever get confirmed?
Yes, it is :thumb:
Have all the invoices been confirmed? I'm excited for production to start :thumb: :thumb:
It looks like the original 60% could have supported a weight insert? Does this support that too?
Did this ever get confirmed?
Yes, it is :thumb:
And how do we get such an insert?:D
It looks like the original 60% could have supported a weight insert? Does this support that too?
Did this ever get confirmed?
Yes, it is :thumb:
And how do we get such an insert?:D
Im working on it to have it as a free gift for everyone in this GB
Will update on it later :D
Even the acrylic case?:)
Im working on it to have it as a free gift for everyone in this GB
Will update on it later :D
Even the acrylic case?:)
Im working on it to have it as a free gift for everyone in this GB
Will update on it later :D
Understandable :)Even the acrylic case?:)
Im working on it to have it as a free gift for everyone in this GB
Will update on it later :D
The acryclic is not compatible since drilling in the middle could bend it.
I accidentally ordered plate mounted stabilizer for the universal plate. Do they work?
Produce
:)QuoteProduce
Wew :D
Just a little update, the block has been send to the CNC factory. I'll have some pic when they finish the CNC part.
Cheers :thumb:
Sny news?
Sorry for reposting the question but is the acrylic case on the same schedule as the aluminum case?
Do you think it will still be by the end of this year? Just trying to plan out my builds :).Sorry for reposting the question but is the acrylic case on the same schedule as the aluminum case?
It will be a bit later :)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
Ohh! Any idea when these will be done by?
Do you think it will still be by the end of this year? Just trying to plan out my builds :).Sorry for reposting the question but is the acrylic case on the same schedule as the aluminum case?
It will be a bit later :)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
have some update as mentioned :thumb:Show Image(https://lh3.googleusercontent.com/TaMzXu8RKr2YxPuG9vmoNfbceg_WdyL7bf0KyX2MeKN4aQWjEG7GDuZih0fSRMgC7jXr_MbrHXBoxegqmdaGY4xmeTg1uhpb1NfnOFeek02KAqSitMY9agWIwRXKHd9vypywOfVKA4zuyYRSdX0YEETkzcqCbu9BKWLhrsMnuzcyT1kSmWthuNwhk34BA1Dcc8KlZVhYiAVT1MmPIcWONNwX3MD0TdJEN0EDg1wfNHRO3Vbq_11hixa0fZTAGcxzlLiHX6yAozYjLK1hCePXuVeY1VZtzM44pNXBDBdOo631QxASEJKICUFhH6QYLfjmVsO8O5KgfV31DnradUv6JRnK73kpVcX35geMJApXrIlalPA9jtvkTs1w-mQlrLbUFObvNNV2oYwcObUAqxlpVkly7Tb5CZPeHahjtqWM4VzT98DXnVsS6e1zI-0sdYz1v9-F_SMOTlPO0EdO1ctxx9oIWNv4hMxziqOI_WFGUpBc0Y42NWHOKg439qFsN9vTa1CEHcIjyPIGG5Xhhif1PHkD0NaMn2Qp8dfjUf7GbwU1UZRMPX3OwBKHLt5iwQJXquDDNgyOcMVd_s7plZD7I-flwpG1v52suGHMkPX1aWO2XWUL7g=w1268-h950-no)Show Image(https://lh3.googleusercontent.com/E30iBimaap5lqxrs791xVFKH6jQFcxotb7yeAgQJKSf0DGWOXe8tCB664UbIEd29RymsBzLf03S2RCneIjUjEmqn3Sg7INaVL8NunsRL4r70Att6OM3M--jcn8AAPSgDZoIX1D3BwWrh_2p92_2ll1xKxOMf4qx-xLTE9iaeiPenk5NTM3l-xtDGuLdxNms_lTJ3JVwgEggirJ6QAGtar96yumYVTW91jBUQfupwPSdskHTngNLB_oA4gfzX77abXC7XcEP8i4A_bt88aSz9XGtuObTHU1o_hkc0Nboycvi3iyHiThl9ndsGx90rPKuABG-7HZIutaC8Rf69W4KFUAFy-xf0vrELni0KU5I845YaFmOMY7io-AeyR0V2smfRVtlh900quhsKli-dQeOJkzY_GN0SNSo016aAqxOWY52hK_SAtuIzdkYif7iJIM4DxCR6DpbSFRRxMxAu0517wx9cC8wHa8DvdiPREU9tC8sPUF-jNVhRF86GH8Q9gjOaU2lfXPirhZtYVICIloBUgTtg7uLLjSAv1Ts12BIdv7XzFBUK4Dep-pRI8RddyYmpU7fGtbTAto3BcM1szS7dfYQsy1A1kDsVOZaJ5xQr2NTJP7BDMA=w1268-h950-no)
damn those things look thick, can't wait to see the finished product.
What is 10$? Is that the weight?
Oh right, totally in for this then!What is 10$? Is that the weight?
10$ for the Copper Brash plate inside
Weight is about 0.5kg
I got my hands-on the Copper Brash sample today
10$ for this lovely baby, who want? :pShow Image(https://lh3.googleusercontent.com/CDo53k8inyCilznDyvImACAt4xiBGuYdggIvh_7zJiQPvBycpETTOHsgBtIFnIMw0czM4HMqnyPxR_rvitn7gnQbBZGlQBZmu4YQpn9Vzbz6UdERTH9i0tWtFvmXsuGh2JLAzHArfxM9aTAb8csdw0aHQRLtAFKgJT6rpB-DrLD8ganjSMaFSOJYAxl4yKWdqMcLxoPa1a1-lJomsBMwpk2RLdsRyr_n2yxLdjppcVUtG0GpgOQIlHHHzP8YtbfdDBw7vSdwGSNDHcy7kMoN0v9yXvTWYVROBwDBM6-rI_eCSMjrjhMZGdaLuud1iDbqHLaI6pAtJ-m5Nqb9ZAebpbTpQiqY_elm8nDjrSZhGqY1hEhFV2ICSKkADvK3pvwX-dLqLkUq5PNRS8iTP4oOX6HEMrpRdb6XJR709gJc2fZjKxvMsCjQKIOmPdcVyk8h9d1w7OLkPKfUrmm6kLm2hfYZUW7MWdwGNeJFiYwIN9WDLQPNpPQuSvIzERSqFeWjESZSAsIPazS-QIuoURIrAJ5_nv5Eq10KGzjaMaM01b9okCS2yArKMOeDJS6au53XltuF_8wgJ1nTl0CBaZwsfSAdlkRfMyNjDJcWrY3kYvq6QaFscg=w944-h708-no)
I planned to gift this plate for all GBer but i was not so sure about the quality, so i did not list itTotally in!
Now the sample is much better than i expect so i decide to gift them, but it will increase the shipping price about 10$ so i want to have some feedback from you guys :)
I planned to gift this plate for all GBer but i was not so sure about the quality, so i did not list it
Now the sample is much better than i expect so i decide to gift them, but it will increase the shipping price about 10$ so i want to have some feedback from you guys :)
I planned to gift this plate for all GBer but i was not so sure about the quality, so i did not list it
Now the sample is much better than i expect so i decide to gift them, but it will increase the shipping price about 10$ so i want to have some feedback from you guys :)
The CNC is finished and all are waiting for the Anodizing part.Thanks for the update! Do you think these will be shipping out this side of Christmas?
I will prepare the invoice for the Brass for all GBer, if you dont need it just ignore or decline :D
I have 4 extra cases, just leave me a msg if you want :thumb:
Is there any news on the acrylic cases? :)
The CNC is finished and all are waiting for the Anodizing part.Thanks for the update! Do you think these will be shipping out this side of Christmas?
I will prepare the invoice for the Brass for all GBer, if you dont need it just ignore or decline :D
I have 4 extra cases, just leave me a msg if you want :thumb:
Pic updated!Looks goodso far. When do you expect shipping to you?Show Image(https://lh3.googleusercontent.com/eDiGMr1Xvnna21YaaoczsrZvMdAA4_K32PT3qd5zcy9PwfGBhn-4ZCII8uE8WhynVdDB_-hWLBFXPWkr1swHGT2l0e48sjybDdNbAZ4El-TDIWiiFesTlagF30uIgw1SbfNHXdEMmeGPhrN4OE1_aueRvQFxNBzjXvIU0hkNHKOmsa5fAlIG6rl1Ld3_UINh_UvxYC6iGM3CtACK_KIPVSKl8Ob9h-aHHmrpTLSQ1oITVsT_rVmlI9ZKnuKdKcywL0CUH-LfPjm75vmqXisYdec5X8Nix9a2QsIb5ZfegJZVFUhoQbLrwEJioabKa06ZCOKX7SZPVY0zg9flRcr77pruyDmst-pzc7MP3Icg7tgHsKJvYedYR00P3xEEWUBnHC7hny9HKcSu8wOGs28skM1EG0jYKZ3ZfE8_3KV0_H6342noDfGOBrypzbSen0G49Y3NlNvxsiUSp66fA98R8UV6lfjo84HYGAJ-aAvfgI_thAPLS-kyBsNxBDC-CZNn6ScATKYNVNmH-CT3eGcJigIldhYPQI4lYsJUfiLFNIAHGXy5zFokInWhYGYyIXT3kQtkp5MbMVXsZQ84ufdiG1XJbVSa5-oc0Vqq_1eGBzaNCQ9gvtQxIsEEkKmqJgOgu4wx1lxoydY9MrPm2249CuCo-X7NCkS52IqvGa5cvMI=w1136-h852-no)Show Image(https://lh3.googleusercontent.com/m9Te7KCarHWBh_0tqIcvHAFuZBnBMiPu12yq_ASC8CeMF3J-hQfzT0QZti5f7BXV6tWkrLWZRhO235553Jo7-6b9EIi6Rxemha5T0arfLusX2qtJ8b0qbKAiXBk_PCBp8qJG-nuriXVITLUS8vXbLdsNDbERZUHqCgMsrtZJo4b6GxoKslp-kdkIxeVfWvEtl0fZpRuGhuJmieDhdrbxmrREhCkEmaU_PDluh4YN1ZWkQXjzyEDdp6a5minWo5ZVImN3XShTNmOgflYUmDBgDsPZIPr2RJYhiJqEICio4YhHVLDytVohf3j0VuSoLmLcSmFgjKJ8opTuhRYPtubPlrN40OmiX5gdbFgcp1OvMJkU7f0dxmaOgAZicumXHpYfhBa44B0G8674yglMWMibzDbLeAGP0TU5xQ6O_wRgahqJvQO26jwd9YpeAk6MOyj_5i1ADVerqx4TWXaJ4WvqZGyhbm0D_Q99iYRJ6eurZA6O0r0-6wt4CcaicMfKkOMxRWdPsTpGobbjXo9hjBsllSHI-xEguJqVdnByNXs1nNhMrjM_OQhDQUbR_rg3wqVqUlnQIi3lW9RncwdktnXf76NOBVWbuAdaYg085mw_N_gHM9Qo4aqawBCjPKwpU4_8gyL2nGVR90HkyAHoc_COXt4ikHY9qBahNXuWZq9J26c=w1136-h852-no)
Pic updated!Looks goodso far. When do you expect shipping to you?Show Image(https://lh3.googleusercontent.com/eDiGMr1Xvnna21YaaoczsrZvMdAA4_K32PT3qd5zcy9PwfGBhn-4ZCII8uE8WhynVdDB_-hWLBFXPWkr1swHGT2l0e48sjybDdNbAZ4El-TDIWiiFesTlagF30uIgw1SbfNHXdEMmeGPhrN4OE1_aueRvQFxNBzjXvIU0hkNHKOmsa5fAlIG6rl1Ld3_UINh_UvxYC6iGM3CtACK_KIPVSKl8Ob9h-aHHmrpTLSQ1oITVsT_rVmlI9ZKnuKdKcywL0CUH-LfPjm75vmqXisYdec5X8Nix9a2QsIb5ZfegJZVFUhoQbLrwEJioabKa06ZCOKX7SZPVY0zg9flRcr77pruyDmst-pzc7MP3Icg7tgHsKJvYedYR00P3xEEWUBnHC7hny9HKcSu8wOGs28skM1EG0jYKZ3ZfE8_3KV0_H6342noDfGOBrypzbSen0G49Y3NlNvxsiUSp66fA98R8UV6lfjo84HYGAJ-aAvfgI_thAPLS-kyBsNxBDC-CZNn6ScATKYNVNmH-CT3eGcJigIldhYPQI4lYsJUfiLFNIAHGXy5zFokInWhYGYyIXT3kQtkp5MbMVXsZQ84ufdiG1XJbVSa5-oc0Vqq_1eGBzaNCQ9gvtQxIsEEkKmqJgOgu4wx1lxoydY9MrPm2249CuCo-X7NCkS52IqvGa5cvMI=w1136-h852-no)Show Image(https://lh3.googleusercontent.com/m9Te7KCarHWBh_0tqIcvHAFuZBnBMiPu12yq_ASC8CeMF3J-hQfzT0QZti5f7BXV6tWkrLWZRhO235553Jo7-6b9EIi6Rxemha5T0arfLusX2qtJ8b0qbKAiXBk_PCBp8qJG-nuriXVITLUS8vXbLdsNDbERZUHqCgMsrtZJo4b6GxoKslp-kdkIxeVfWvEtl0fZpRuGhuJmieDhdrbxmrREhCkEmaU_PDluh4YN1ZWkQXjzyEDdp6a5minWo5ZVImN3XShTNmOgflYUmDBgDsPZIPr2RJYhiJqEICio4YhHVLDytVohf3j0VuSoLmLcSmFgjKJ8opTuhRYPtubPlrN40OmiX5gdbFgcp1OvMJkU7f0dxmaOgAZicumXHpYfhBa44B0G8674yglMWMibzDbLeAGP0TU5xQ6O_wRgahqJvQO26jwd9YpeAk6MOyj_5i1ADVerqx4TWXaJ4WvqZGyhbm0D_Q99iYRJ6eurZA6O0r0-6wt4CcaicMfKkOMxRWdPsTpGobbjXo9hjBsllSHI-xEguJqVdnByNXs1nNhMrjM_OQhDQUbR_rg3wqVqUlnQIi3lW9RncwdktnXf76NOBVWbuAdaYg085mw_N_gHM9Qo4aqawBCjPKwpU4_8gyL2nGVR90HkyAHoc_COXt4ikHY9qBahNXuWZq9J26c=w1136-h852-no)
Oooh shiny! Really excited for this, thanks for the update!
Hi all,
The production is slower due to the Xmas, estimate time to finish is 1-2 weeks.
Also, the 1st Blue is finish :thumb:Show Image(https://lh3.googleusercontent.com/AQyi11vL5UXbkOtaOEem-sJVvRI_YeYjNQ5_EJC5EVj1vITqvy1DYK2a6U5xWrjBYaTaRDOVyAmmiqDhYVMI0xDOXMS-5XWou9djaVGvBUAPOgWkLBAijR4lYG3n8y8HWVMstPOeyBT2xQMyrpg-I1JZhzrpHVgPWt2-FLpjf8DhyO6KEEwsn6EEiWMWpiUmkIdjX1QXfW4FxqSrDj457gnb__-vLzEwFfN1st8tTOGVBe5s2Xuk289z0LZAH7pGgXkpTPEWRyNQ-HDBtW-y2eUYQiubOtPKV_AoN9DG2rGSOWUeb0xo6UkruS4-Y-gG4nlx1BIuIpUuPnZCVXRLrSOAg7VyIEhLSBB7AeylE5o_Rw2maX2pG9nmihvJuz6YgMhs9zbdtQLEOwY3zUZrrmFNhYllU_kP8AIfdMB3GB-7RVYbxnmgdrdS1bU3aysHcTjV5EblwddDFMF-eWrneQcnSCi5xYjKhQK57hsMuNBxjc89nsMOsTyT_D0EFD7nZnJ3oRlJxrJVneXmfQTA8TjJeWmVRGpEhkH53tO0IQtMUmKGNBmiAooYnKInvyzqtqn7mrOvorV3tSwSMel0rIdoPwTuNlUJO-h2OTibW0XgIL8w6k0wQuaeI6ytl5fd0sbTQKw0Qp_5n7l50UH_I1vvlJs7sqUAVc4ZpgbGrgs=w1202-h901-no)Show Image(https://lh3.googleusercontent.com/QYoD2cjakf9tRuGJHvrM57TP9hCmGhUJg1iCTV8XeLmHLQPZ93kaE8AIDAdUvD6sO0SSDqQ9mjHENvEKyOrp5nTbp8xu5W8sei-2ZLBhNQUIg5uvvx7ZLhktK4saNDiNRAmRUCJbb0Xa-3jw5w_5NczyOSFq6d9rOSwhicOmT1v5YTg-pG0ml96FjCs459mUsTPWYeykHvL4uPeB3cKgnqzyWVrkyrQCX2_e3cCwwoEjKtWYIhOjQAqFpHZDRm-hg_0Yb8pgLAAR9aRlRsS-JcD2xU2vf6dkRgSJ-u4sj_uSngIKT1t4IF2iKuSHv2NaVwLOp5alJtmw3wdm9HlTM3sAfkFAaP-FDJfN-S5IxuutdZEBx0To0qgsjyhdJ9MQv-40Q-tm4OYoz2xcoy_2wRx1eG3XP_twgFeLjbQqhHi5DiGje5Wfx0gG2IGy7gq1cLkhd-hL6hjZX7CKE01xRfNHjIcVAAXb1EmjCmSZ8VdcKPNu4dW9uZDHM4CaOGuJl5mF3RzQzoYOTkU7zCatw4KrJH2nwITBOPbJ9x8ZbTQMSjSPRcVL0y6cQc4_FwoYCOWasu3Vt3KYTTbZrO3hZaZEwb5aNkQjZrLKS1nMiJdzq0e4IuolXHvD0nBi2xDwZm6SdTd1ddx7bqZe9la0jYQLsqeMurR0l8Xmy86blA8=w1202-h901-no)
I never knew we could order blue -.- I got a black one (will fit ISO-DE dolch).
Damn.. maybe I should have got the blue haha
As i claimed before, I need your support to produce and ship the Brass Plate
I've just send the invoice and hope you all will support me. Thank u :D
Any updates? Been the ~1-2 weeks since the last update and hoping that at least one of my GBs isn't delayed :(I go into group buys expecting them to be delayed. That way, I'm pleasantly surprised when they're on time :)
Any updates? Been the ~1-2 weeks since the last update and hoping that at least one of my GBs isn't delayed :(I go into group buys expecting them to be delayed. That way, I'm pleasantly surprised when they're on time :)
Any updates? Been the ~1-2 weeks since the last update and hoping that at least one of my GBs isn't delayed :(I go into group buys expecting them to be delayed. That way, I'm pleasantly surprised when they're on time :)
Heh I'm pretty sure 99% of my GBs have been delayed... the few that weren't were for stuff like springs and sockets.I definitely hope its soon too, though I'm getting the acrylic one so i know that isn't supposed to happen until after the aluminum ones are done.
Just hoping to be pleasantly surprised since I figure I'm due. ;)
I just imagine a monterous block of acrylic. Such a sight must be stared at!I'll definitely post! It'll probably look like a bigger version of this guy's board(https://www.reddit.com/r/MechanicalKeyboards/comments/5mlvvw/hyperfuse_x_kosmo/), since his was the 60% version that bdtbinh made.
I just imagine a monterous block of acrylic. Such a sight must be stared at!I'll definitely post! It'll probably look like a bigger version of this guy's board(https://www.reddit.com/r/MechanicalKeyboards/comments/5mlvvw/hyperfuse_x_kosmo/), since his was the 60% version that bdtbinh made.
As i claimed before, I need your support to produce and ship the Brass Plate
I've just send the invoice and hope you all will support me. Thank u :D
Just so you know he means brass weight for the back of the board and not brass switch plateAs i claimed before, I need your support to produce and ship the Brass Plate
I've just send the invoice and hope you all will support me. Thank u :D
Hey man! I left you a pm, would love to add a brass plate to my order as well - did not realize brass plate master race until very recently. Lemme know if it's possible.
Just so you know he means brass weight for the back of the board and not brass switch plateAs i claimed before, I need your support to produce and ship the Brass Plate
I've just send the invoice and hope you all will support me. Thank u :D
Hey man! I left you a pm, would love to add a brass plate to my order as well - did not realize brass plate master race until very recently. Lemme know if it's possible.
Hopefully these can be shipped out before Vietnamese New Year which is in about 2 weeks. Although, businesses usually close a week prior and then a few weeks after...
So long without an update :(Tell me about it, anything would be good!
Sorry guys for long time before this update.Ah, thanks for the update. If you could get them out before the holidays that would be amazing. :)
Due to the New Year Holiday coming, the factory got overload with stuff so progress is slower than i expected.
I'm still pushing them to have the package ship before Holiday. Will update for you guys this week :D
Sorry guys for long time before this update.Sounds good. How long do you think you need to package them and send them abroad?
Due to the New Year Holiday coming, the factory got overload with stuff so progress is slower than i expected.
I'm still pushing them to have the package ship before Holiday. Will update for you guys this week :D
Sorry guys for long time before this update.
Due to the New Year Holiday coming, the factory got overload with stuff so progress is slower than i expected.
I'm still pushing them to have the package ship before Holiday. Will update for you guys this week :D
Mine also ;)Sorry guys for long time before this update.
Due to the New Year Holiday coming, the factory got overload with stuff so progress is slower than i expected.
I'm still pushing them to have the package ship before Holiday. Will update for you guys this week :D
Just remember I need it sent as a low value gift, please
And mine!Mine also ;)Sorry guys for long time before this update.
Due to the New Year Holiday coming, the factory got overload with stuff so progress is slower than i expected.
I'm still pushing them to have the package ship before Holiday. Will update for you guys this week :D
Just remember I need it sent as a low value gift, please
These will possibly ship out before Mid February. Possibly. :'(Of course! I have a set of round 6 caps ready to go on mine!
I hope everyone here will take some nice shots of their new boards once you get them!
There are few case left so the factory had not send me the Package before Tet holiday (start on 1/26 and end on 2/2)Sounds good. Maybe mine arrives on my birthday..
But they will be able to send in 1 week from 2/3. Therefore i still can start shipping the package in 2/15 as planed :D
There are few case left so the factory had not send me the Package before Tet holiday (start on 1/26 and end on 2/2)Sounds good. Maybe mine arrives on my birthday..
But they will be able to send in 1 week from 2/3. Therefore i still can start shipping the package in 2/15 as planed :D
Btw, do you remember to lower the value on multiple packages due to customs?
Does your ship estimate include the acrylic cases or is that a little later?
YAASS! Can't wait to get it! Any pictures of the weight insert or the plates? :eek:
Packaging is still in progress :thumb:Show Image(https://lh3.googleusercontent.com/lv_ANK6cDVNPp4ku9z1M0VjPxoHu-Psl-YVB4RtzLEdi6P5a8szQ36vWynyfpoxciuYlNt7P2YAYbZaHCIgG16J5ZI5Z-GCAwdjUOgfktrM5f9taf9zODxV-tfWXXSYd3VYBd7M4H5UazA5_-w-mWtPIpKtwf5syspv1QqZtCZZSmP8xL_p5rPq4n4wbzdUcN0hn8N6j1OdUA_kOWMh00gBFOX6b1aGdjPQRmPoq8-HGz69ZbnA-PWqv5KK4z7HGIOr8YacRAVdKKJojAQi_9jDr4csV0QaUSROdchjYO3ABjcecmi0kMFvygD8xfDnpbKjZV8kN38ipxEX3y5Bij0WDz2yHBDVnYhaEi-1nh_w-D0g9l6_1lbdgfd8SFWd19dNLlTDHnsCOp2uEiqYMvSHDjAaBHf5JU4tNjdxMwMeOSkSwFTpH_TnaOny9TglhnhXq0N40GVq4Pdu1VdPuRDDhrD9qIMPEVgbb20sLY0MNhFcM-ljg2ei5StNJr5UL-zsCl3tOof1CJ2Om7xe9GvowdhAczHEV3g2Mu4ntaaME4Ho1eO0O906XJxvazI_FjS9F_SpEPvO3H0zuWa3xvavwcaHxsl_gtyPERuN6zvj00NvQgfwgSAl71MhA9ZCt53CqOTdfkLhTWBjYKgm1Zz9yRp6nqPB43mZv0FjaxGw=w1175-h882-no)
I think I see my red one! Hope to see it at my doorstep soon :thumb:
I think I see my red one! Hope to see it at my doorstep soon :thumb:
Did you get a shipping notification?
I just hope shipping won't take several weeks to Germany...
That would be awesomeI just hope shipping won't take several weeks to Germany...
My TriC60 had a similar postage cost to this GB and it turned up in two days via DHL to the UK. I'd hope with the cost of shipping that an express service is being used here too?
Deadline 10/23
After that, we have:
1 Week for Invoicing + Billing
1 Month for Production
1 Week for Shipping
My PayPal ends on 23.04.2017, the original timeline was:Checking in. I'm tired of waiting.QuoteDeadline 10/23
After that, we have:
1 Week for Invoicing + Billing
1 Month for Production
1 Week for Shipping
This should have shipped before Christmas! I will raise a dispute on 10.04.2017 unless I have an ACTIVE tracking number by then.
Btw, can you give details about the shipping? Is it express due to the high price ?
Appreciate it!Btw, can you give details about the shipping? Is it express due to the high price ?
Yes, it's express. Expect delivery time after shipping is < 1 week.
Update?
Amazing! Will we get tracking in a PM on here or email?
Just got my tracking number, scheduled for local delivery tomorrow :eek:
Oh my... Pics?!Just got my tracking number, scheduled for local delivery tomorrow :eek:
LOL I just received it.
Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.Wait what?
Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.Wait what?
I mean, I'll use Holtite sockets, but still, it's a bummer.
Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.Wait what?
I mean, I'll use Holtite sockets, but still, it's a bummer.
Well it looks like plain square cut outs on the plate so I don't think that'll support it. In the original images, the carbon plate (although not the right size) had the cut outs for switchtop removal.
Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border
Already bought all my switches (zeal)Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border
You'd probably just want to make sure you used 5 pin switches to give them the extra stability.
Zealios are already 5 pin so that's alright.Already bought all my switches (zeal)Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border
You'd probably just want to make sure you used 5 pin switches to give them the extra stability.
Okay just did some checking on the pcb!Thanks for the info.
Everyone be aware the PCB - at least mine - came in bootloader mode and had to be flashed with the ps2avrGB firmware first!
Then you have to perform ALL MAPPINGS and configure the RBG leds.
I mean this case totally doesn't support any underlight at all but I still wanted them to all work. Three RGB LEDs had a a faulty soldering point that was simply fixed by using a soldering iron and heating all four soldering joints for a second.
So now the PCB looks ready to go!
Zealios are already 5 pin so that's alright.Already bought all my switches (zeal)Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border
You'd probably just want to make sure you used 5 pin switches to give them the extra stability.
The removable plate sample was good, but the final product is not... So i asked them to reproduce and change to non-removable. It was their 1st time doing this stuff so the removable kinda too hard for them. If you are not happy with that, just leave me a msg and i will find a way to sort thing out :(
Just got my tracking number, scheduled for local delivery tomorrow :eek:
LOL I just received it.
He must have shipped a few over the weekend/very end of last week. The express shipping is super quick! If ours ship before Wednesday we should have them this week. Wodan is in Germany I believe.Just got my tracking number, scheduled for local delivery tomorrow :eek:
LOL I just received it.
Lol wait what where are you based and when was it shipped? Why was it so quick. Looks awesome btw!
Yes he lives in Germany, as well as I but I got no tracking number so far.He must have shipped a few over the weekend/very end of last week. The express shipping is super quick! If ours ship before Wednesday we should have them this week. Wodan is in Germany I believe.Just got my tracking number, scheduled for local delivery tomorrow :eek:
LOL I just received it.
Lol wait what where are you based and when was it shipped? Why was it so quick. Looks awesome btw!
For some reason I got purple. Maybe I ordered that? 2016 was a wreck of a year ...Show Image(http://i.imgur.com/Ajvdmmf.jpg)
Looks nice with the carbon plate though:Show Image(http://i.imgur.com/reSXT3N.jpg)
Packing was solid, weight came screwed in and all party were packed in a way they couldn't hit each other. I did not find any anodizing defects or dents:Show Image(http://i.imgur.com/VTN1sLJ.jpg)
50 (!) bumpons included for some reason.
Anyone on the west coast get theirs yet? Or a tracking number?
bdtbinh please could we have a status update?
How's the shipping going?
How many have been shipped?
You said you would ship 80% of orders this week, what happens to the other 20% if you're starting a new job next week?
Any communication would be good, I'm sure everyone here would appreciate it. Thanks :)
Has production for the acrylic cases started? :)
Has mine shipped yet? :)
Has production for the acrylic cases started? :)
Not yet until i finish the alum order. But dont worry too much, the acrylic version is much simpler to produce so it will be 1-1.5 week only :D
Has mine shipped yet? :)
I have shipped out all the carbon order except Will_26 cause he need the switch. Now i'm continue with the alum plate order.
Please be patient :D
Has production for the acrylic cases started? :)
Not yet until i finish the alum order. But dont worry too much, the acrylic version is much simpler to produce so it will be 1-1.5 week only :D
What's going on with carbon plate? Missing screw hole, no switch removal, and very thin here for some reason(?)
I probably would have asked to swap to the standard plate if we'd been updated as to the issues that came about with the carbonShow Image(http://i.imgur.com/Fa5RvRH.png)Has mine shipped yet? :)
I have shipped out all the carbon order except Will_26 cause he need the switch. Now i'm continue with the alum plate order.
Please be patient :D
i was carbon and didn't get a tracking # :(
Due to weekend, i cant get the tracking number so i will update on Monday instead :thumb:
Just updated tracking for some, the rest please be patient, i'm still working hard on it :thumb:I just replied to mine as it doesn't work, could you send me the TNT number like Petch has?
Just updated tracking for some, the rest please be patient, i'm still working hard on it :thumb:I just replied to mine as it doesn't work, could you send me the TNT number like Petch has?
That's what I used but doesn't work. It's cool, Bui just confirmed it doesn't work and is trying to get me the correct ref! Are you in the UK? Does the tracking suggest it'll arrive soon?Just updated tracking for some, the rest please be patient, i'm still working hard on it :thumb:I just replied to mine as it doesn't work, could you send me the TNT number like Petch has?
https://www.tnt.com/express/en_vn/site/shipping-tools/tracking.html?cons=XXXXXXXXX&searchType=CON
Use that, but with your tracking number
I'm in Germany and get 24 March
Anyone from west coast Canada/US receive their tracking yet?
Photos here (http://imgur.com/a/nAmiC) showing what I mean.Same for mine.. I'll try to sand it down.
my 4 key wont do anything. Its Row 5 Colum 5, does anyone know how to bridge it? :eek:Take a look at the black resistors (they're rectangular). Loads of mine had zero solder on the bottom of them. You could visually see they weren't done and those keys didn't work. Touch of solder and they all worked fine.
(https://uploads.tapatalk-cdn.com/20170325/5eea905e52563d2c1598977b71e112a6.jpg)my 4 key wont do anything. Its Row 5 Colum 5, does anyone know how to bridge it? :eek:Take a look at the black resistors (they're rectangular). Loads of mine had zero solder on the bottom of them. You could visually see they weren't done and those keys didn't work. Touch of solder and they all worked fine.
Great, glad it worked! It was like that for 10+ of mine so was a little nervous at first!
guys what firmware and keymap do I want? I have split backspace, can't get it to work. Tried a different firmware now half my keys don't workI followed this FAQ and it worked fine:
guys what firmware and keymap do I want? I have split backspace, can't get it to work. Tried a different firmware now half my keys don't workI followed this FAQ and it worked fine:
http://blog.winkeyless.kr/183
my 4 key wont do anything. Its Row 5 Colum 5, does anyone know how to bridge it? :eek:Take a look at the black resistors (they're rectangular). Loads of mine had zero solder on the bottom of them. You could visually see they weren't done and those keys didn't work. Touch of solder and they all worked fine.
I'm not sure about the split backspace. But in regard to my other comment, it is the black ones that were missing some solder.guys what firmware and keymap do I want? I have split backspace, can't get it to work. Tried a different firmware now half my keys don't workI followed this FAQ and it worked fine:
http://blog.winkeyless.kr/183my 4 key wont do anything. Its Row 5 Colum 5, does anyone know how to bridge it? :eek:Take a look at the black resistors (they're rectangular). Loads of mine had zero solder on the bottom of them. You could visually see they weren't done and those keys didn't work. Touch of solder and they all worked fine.
Ok, some of my keys aren't working - possibly my bad soldering. Which bit is the resistor, the little rectangle or the tiny one?
One that doesn't get highlighted in the bootmapper is my split backspace; not sure if I need the _split firmware for this to work or bad soldering somewhere?
You'll need the split firmware if I remember a build last year correctly.guys what firmware and keymap do I want? I have split backspace, can't get it to work. Tried a different firmware now half my keys don't workI followed this FAQ and it worked fine:
http://blog.winkeyless.kr/183my 4 key wont do anything. Its Row 5 Colum 5, does anyone know how to bridge it? :eek:Take a look at the black resistors (they're rectangular). Loads of mine had zero solder on the bottom of them. You could visually see they weren't done and those keys didn't work. Touch of solder and they all worked fine.
Ok, some of my keys aren't working - possibly my bad soldering. Which bit is the resistor, the little rectangle or the tiny one?
One that doesn't get highlighted in the bootmapper is my split backspace; not sure if I need the _split firmware for this to work or bad soldering somewhere?
You'll need the split firmware if I remember a build last year correctly.Half my keys stopped working with the split firmware (toggled bootmapper and pressed keys to see if they highlighted cells in the matrix)
Yeah I dunno what to do besides try replace the diode, which I'd have to send it off to someone else for because I'm not good enough to remove the current oneIf you wan to, i can do it. But I'm in German, so shipping back and forth might be to expensive and takes a longer time.
Yeah I dunno what to do besides try replace the diode, which I'd have to send it off to someone else for because I'm not good enough to remove the current oneIf you wan to, i can do it. But I'm in German, so shipping back and forth might be to expensive and takes a longer time.
I have noticed the SMD diode on the key that isn't working is flipped compared to the rest. I've no idea how these work, but I'm guessing the positive/negative are the wrong way around? Or does it not matter?Yea I just had the same thing happen on a different pcb. If a diode is placed the wrong way then that is your problem and I'm 95 percent sure of that.
If so, this could be my problem.
Uhhh.. All these issues with the PCB and anodizing makes me nervous.Doesn't look like it, full list of issues
Is there any quality control being done on these before they are shipped out?
Uhhh.. All these issues with the PCB and anodizing makes me nervous.Doesn't look like it, full list of issues
Is there any quality control being done on these before they are shipped out?
- Plate isn't ISO, doesn't support switch top removal, odd cut-outs in some places (never communicated until we started receiving them)
- PCB has QC issues
- Brass plate screwed in with very rusty screws
- Minor scratch/anodising defect
Which is a shame because otherwise the case is very nice, and despite the delays, everything was nicely packaged and I had no issues with customs
Anyone know what screws are used for the weight so I can replace them?M5 * 8mm Screen in head.
Thanks, these are okay? https://www.amazon.co.uk/dp/B01MR5I2D5/ref=sr_1_1?ie=UTF8&qid=1490604757&sr=8-1&keywords=m5+8mm+screwAnyone know what screws are used for the weight so I can replace them?M5 * 8mm Screen in head.
Yes.Thanks, these are okay? https://www.amazon.co.uk/dp/B01MR5I2D5/ref=sr_1_1?ie=UTF8&qid=1490604757&sr=8-1&keywords=m5+8mm+screwAnyone know what screws are used for the weight so I can replace them?M5 * 8mm Screen in head.
Yeah there's no way the soldering was done by Winkeyless. Their work is really neat.
Yeah there's no way the soldering was done by Winkeyless. Their work is really neat.
Maybe those are b.fake pcbs? I really hope not, as we bought them under the assumption those are WKL pcbs. Strange is, that i dont have a b.mini branding on the pcb. my b.87 and b.face pcb both had this marking... :confused:
Ah okay. BTW, just noticed this issue with my LEDs.. will investigate this evening why it's not working.. probably a missing solder joint.Yeah there's no way the soldering was done by Winkeyless. Their work is really neat.
Maybe those are b.fake pcbs? I really hope not, as we bought them under the assumption those are WKL pcbs. Strange is, that i dont have a b.mini branding on the pcb. my b.87 and b.face pcb both had this marking... :confused:
Mine is the same. I think they are WKR ones because the b.fake's don't support ISO, they're ANSI only.
Comparing our PCBs to the images here http://winkeyless.kr/soldering-guide/
I think it's safe to say these were NOT pre-soldered by WKL. The missing solder (and flipped diode in my case) are also giveaways
For those who have received the package and feeling unhappy with it, i really understand and will work with you until thing turn GOOD for both sides, no worry.If you're able to approve the partial refund I requested on PayPal I'll be able to deal with the issues myself.
For those who have not received the package, even the refund deadline is passed, i still accepting partial refund for you in case you have problem with your package, too. Because this is not my 1st and last group buy, i still have many projects to come in the future.
All i ask is the patience and understanding for me to make this GB right for all members in it, also i'm willing to refund for you because it is all my fault, but half the price of the package is just too much for me to endure.
So please stay calm and continue to work with me until this GB is finished and everyone is happy.
Thanks all :)
Would this pcb fit in the case?That's the pcb we get - although not soldered by them. However, if you can solder it's easier to fix the pcb, there are just minor issues.
http://winkeyless.kr/product/b-mini-x2-pcb/
If so I would just like a refund for the pcb and buy it directly from them with all the components soldered in.
Pending the arrival of my kit and inspection....
Would this pcb fit in the case?If your diodes ending missing solder from this group buy (likely) that's not TOO hard to fix, but if one of them is installed the wrong way like on mine you better be good at desoldering tiny components... I'm probably going to have to send mine off to someone with better equipment and more experience, which is adding more cost to an already very expensive keyboard.
http://winkeyless.kr/product/b-mini-x2-pcb/
If so I would just like a refund for the pcb and buy it directly from them with all the components soldered in.
Pending the arrival of my kit and inspection....
Would this pcb fit in the case?If your diodes ending missing solder from this group buy (likely) that's not TOO hard to fix, but if one of them is installed the wrong way like on mine you better be good at desoldering tiny components... I'm probably going to have to send mine off to someone with better equipment and more experience, which is adding more cost to an already very expensive keyboard.
http://winkeyless.kr/product/b-mini-x2-pcb/
If so I would just like a refund for the pcb and buy it directly from them with all the components soldered in.
Pending the arrival of my kit and inspection....
For those who have received the package and feeling unhappy with it, i really understand and will work with you until thing turn GOOD for both sides, no worry.
For those who have not received the package, even the refund deadline is passed, i still accepting partial refund for you in case you have problem with your package, too. Because this is not my 1st and last group buy, i still have many projects to come in the future.
All i ask is the patience and understanding for me to make this GB right for all members in it, also i'm willing to refund for you because it is all my fault, but half the price of the package is just too much for me to endure.
So please stay calm and continue to work with me until this GB is finished and everyone is happy.
Thanks all :)
Show Image(https://uploads.tapatalk-cdn.com/20170328/734f5fefa049616c307391b3891e769d.jpg)
Ist there a resistor missing next to the iso enter (the lower one)? I'm asking, as my whole asdfghjjl row doesn't light up...
Edit: just saw they are missing for the whole row. That's unacceptable.Show Image(https://uploads.tapatalk-cdn.com/20170328/576f47725c2ea90b01580bb88e911551.jpg)Show Image(https://uploads.tapatalk-cdn.com/20170328/8f580392968b1d5294deae4153122ba9.jpg)
Can someone please give me the I fo which resistor I need so I can buy them myself?
Well, good luck with that :-[
I managed to remove and refit my flipped smd diode, all keys working now.
I swapped the screws for ones that aren't rusty, there was a weird residue under the weight so you guys might want to check for that (there was a puddle at each screw hole)
Well, good luck with that :-[
I managed to remove and refit my flipped smd diode, all keys working now.
I swapped the screws for ones that aren't rusty, there was a weird residue under the weight so you guys might want to check for that (there was a puddle at each screw hole)
Wait, a puddle of reside? Was it easily removed? Hopefully everyone got their tetanus shot, just in case, due to the rusty screws.
bdtbinh, can you please replace the rusty screws with non-rusty screws for the orders you haven't shipped?
Anyone get a tracking number yet?
Planning on opening a PayPal dispute at the end of the week if I don't hear anything.
Show Image(https://uploads.tapatalk-cdn.com/20170406/2b1768555ee02f1217d125b2e7e72ec2.jpg)
Finally the build is complete.
My GF gifted it me some years ago. Was from massdrop.Show Image(https://uploads.tapatalk-cdn.com/20170406/2b1768555ee02f1217d125b2e7e72ec2.jpg)
Finally the build is complete.
Wow! Wait, is that a wolverine claw? Where did you get that from? :eek:
Show Image(https://uploads.tapatalk-cdn.com/20170406/2b1768555ee02f1217d125b2e7e72ec2.jpg)
Finally the build is complete.
Wow! Wait, is that a wolverine claw? Where did you get that from? :eek:
Well, good luck with that :-[
I managed to remove and refit my flipped smd diode, all keys working now.
I swapped the screws for ones that aren't rusty, there was a weird residue under the weight so you guys might want to check for that (there was a puddle at each screw hole)
Wait, a puddle of reside? Was it easily removed? Hopefully everyone got their tetanus shot, just in case, due to the rusty screws.
bdtbinh, can you please replace the rusty screws with non-rusty screws for the orders you haven't shipped?
Yes, i will. Sorry for that :(
All left orders will be send before the end of next week, if i can not make it, i will refund for you.
This gb really stressed me out cause many things go wrong, but all just because of my reckless :(
Thanks everyone again for your support :)
Well, good luck with that :-[
I managed to remove and refit my flipped smd diode, all keys working now.
I swapped the screws for ones that aren't rusty, there was a weird residue under the weight so you guys might want to check for that (there was a puddle at each screw hole)
Wait, a puddle of reside? Was it easily removed? Hopefully everyone got their tetanus shot, just in case, due to the rusty screws.
bdtbinh, can you please replace the rusty screws with non-rusty screws for the orders you haven't shipped?
Yes, i will. Sorry for that :(
All left orders will be send before the end of next week, if i can not make it, i will refund for you.
This gb really stressed me out cause many things go wrong, but all just because of my reckless :(
Thanks everyone again for your support :)
I think there is a misunderstanding here. As i said "all left orders will be send before the end of next week" on 4/2 so it mean this week, not last week.
For now my balance is negative so even that i want to refund, i cant
So i let it all be there and still, going to finish shipping all left orders this week.
After that, you can feel free to issue the refund.
How about fulfilling these orders before starting another Group Buy on Reddit?
https://www.reddit.com/r/mechmarket/comments/654kje/gb_blackjack_model_s_60_duck_viper_style/
Bdtbinh seems you decided to completely ignore my advice as well as all of my messages on PayPal. You really are going to have a hard time running another group buy if your conduct is anything like this one. Have you shipped mine and everyone elses boards yet or not? You sent us photos of all of the boards months ago, how hard is it to ship 17 boards? Please please update us or I'm just going to give up and get a full refund from PayPal and you can deal with them chasing you for $470.Wait, are there still boards not shipped while he started a new gb? That's more than unacceptable!
I have filed a claim as well. I'd rather have the keyboard but time has run out.
Just escalated my claim to PayPal. Lack of communication and transparency is seriously frustrating.
Hopefully there will be some KBD75s still in stock by the time everything is resolved
Just escalated my claim to PayPal. Lack of communication and transparency is seriously frustrating.
Hopefully there will be some KBD75s still in stock by the time everything is resolved
Looks like black, silver and grey are sold out now =(
https://shop.kbdfans.cn/products/kbd75-keyboard-set?variant=35638537101
Just escalated my claim to PayPal. Lack of communication and transparency is seriously frustrating.
Hopefully there will be some KBD75s still in stock by the time everything is resolved
Looks like black, silver and grey are sold out now =(
https://shop.kbdfans.cn/products/kbd75-keyboard-set?variant=35638537101
Managed to snag a Black KBD75. Probably should have waited until this whole thing is resolved but don't want to miss out on a solid 75% after being strung along with this GB.
Just for redundancy, did any non-CF orders receive their keyboard?
Just escalated my claim to PayPal. Lack of communication and transparency is seriously frustrating.
Hopefully there will be some KBD75s still in stock by the time everything is resolved
Looks like black, silver and grey are sold out now =(
https://shop.kbdfans.cn/products/kbd75-keyboard-set?variant=35638537101
Managed to snag a Black KBD75. Probably should have waited until this whole thing is resolved but don't want to miss out on a solid 75% after being strung along with this GB.
Just for redundancy, did any non-CF orders receive their keyboard?
Nope, didn't receive mine yet. Pretty sad that KBD75 isn't offered in Purple, as that was the main goal with his board.
Just escalated my claim to PayPal. Lack of communication and transparency is seriously frustrating.
Hopefully there will be some KBD75s still in stock by the time everything is resolved
Looks like black, silver and grey are sold out now =(
https://shop.kbdfans.cn/products/kbd75-keyboard-set?variant=35638537101
Managed to snag a Black KBD75. Probably should have waited until this whole thing is resolved but don't want to miss out on a solid 75% after being strung along with this GB.
Just for redundancy, did any non-CF orders receive their keyboard?
Nope, didn't receive mine yet. Pretty sad that KBD75 isn't offered in Purple, as that was the main goal with his board.
I think it is, you may have to message him and ask.
Keep in mind it has that horrible plate issue with stabilizers, so you will have to modify your plate.
KBD75 is a solid keyboard in the end.
TX-75 has that sick split spacebar support though :cool:
I was also considering TX-75 as well but their purple isn't as deep. Either way i'll need to wait to see if I get a full refund before getting another board.
FYI for those of you waiting for shipping/tracking numbers:
Saturday: i was told my board was packaged and will be sent on Monday
Tuesday: i asked for tracking details and was told my board had only just been picked up by DHL
Wednesday: I receive an invalid TNT tracking number
Today: I'm without any further communication since receiving my invalid tracking number despite my emails
So all in all the shipping process is running as smooth as the group buy, looking forward to getting or not getting my board from DHL and TNT! :thumb:
To mirror what Will_26 said, I sent an email requesting a tracking number to the address listed in the Reddit thread about their 60% Blackjack Keyboard on Tuesday.He told me to email him about a partial refund (for the carbon plate and PCB that didn't work), unsurprisingly not heard back since
That person (not sure if it's bdtbinh or his friend) replied saying that DHL picked up the package from the company (not sure what company) and that he would send specific tracking to me after 12 hours. Didn't receive a follow up email or a notification from DHL that I would be receiving a package (as I signed up for their text notifications). Who knows at this point.
Hey everyone - I just received my parcel so wanted to update so you guys waiting know what to expect. This was my order:
Silver Case with brass weight
PCB x 1
Carbon Plate
Cherry MX blacks
White LEDS
Stabs
Here is what I received:
Silver Case with brass weight: It it beautiful - hoping my KBD75 innards fit, haven't tried yet
PCB: NONE - No PCB included (assuming they didn't bother due to previous issues
Carbon Plate: 1 + ANOTHER aluminium? Plate - with same cutout issues as Carbon plate...
Cherry MX blacks: NONE
White LEDS: NONE
Stabs: NONE
Will be further escalating my paypal case now to ask for a refund for the PCB ($50), Switches/Stabs/LEDs ($60) and Assembly ($35). Won't bother with the plate since I received 2...
*KBD75 insides do not fit the case, this is due to the plate design of the KBD75, as it's designed to be lodged in between the two halves of the case. Looks like I'll have to buy a new WKL PCB and mod the plate...
Hey everyone - I just received my parcel so wanted to update so you guys waiting know what to expect. This was my order:
Silver Case with brass weight
PCB x 1
Carbon Plate
Cherry MX blacks
White LEDS
Stabs
Here is what I received:
Silver Case with brass weight: It it beautiful - hoping my KBD75 innards fit, haven't tried yet
PCB: NONE - No PCB included (assuming they didn't bother due to previous issues
Carbon Plate: 1 + ANOTHER aluminium? Plate - with same cutout issues as Carbon plate...
Cherry MX blacks: NONE
White LEDS: NONE
Stabs: NONE
Will be further escalating my paypal case now to ask for a refund for the PCB ($50), Switches/Stabs/LEDs ($60) and Assembly ($35). Won't bother with the plate since I received 2...
*KBD75 insides do not fit the case, this is due to the plate design of the KBD75, as it's designed to be lodged in between the two halves of the case. Looks like I'll have to buy a new WKL PCB and mod the plate...
Seriously? That is actually unacceptable. Hope you can get something back from PayPal.
I have recovered my money via paypal claim (he didn't respond to PP) and I am done with this GB. I will not be joining any future GBs from this guy.They rejected my claim (for a partial refund) and won't re-review it... Maybe ow you've won against him they will
I have recovered my money via paypal claim (he didn't respond to PP) and I am done with this GB. I will not be joining any future GBs from this guy.
Received my board yesterday.
Received my board yesterday.
I'm assuming you received a shipping notification beforehand? For the rest of us that did not paypal dispute in time.. it's just RIP? I guess I was due for a failed GB, just wish it could have been a less expensive one :(
Any suggestions would be appreciated.
Did people end up getting their boards?
I ended up in a similar situation to thatsmrdoctortoyou. I opened a PayPal dispute (asking for a full refund) and instead of responding to the dispute, bdtbinh shipped out the case. In the meantime, PayPal ruled in my favor and I received a full refund. Now I have both my money back and a case that I no longer want/need. I've sent messages to bdtbinh since then and I've still received no response.Unfortunately I was in for the acrylic cases which were supposed to be produced after the aluminum cases, but he's gone completely silent on geekhack.