Post by: jchan94 on Thu, 03 November 2016, 21:47:53
More
Join Here - Limited to 200 units w/ Raffle
http://bit.ly/M65-A (http://bit.ly/M65-A)
M65-A - Made with RAMA
Full Album - http://imgur.com/a/aXYCB
The keycap sets that are featured are: Hyperfuse by CtrlAlt.io + Hacked by Geeks by JDCarpe
(http://i.imgur.com/nYWI0n7.jpg)
(http://i.imgur.com/lQQmEmc.jpg)
(http://i.imgur.com/nbxOxNb.jpg)
(http://i.imgur.com/FyF4Epa.jpg)
(http://i.imgur.com/p5c3uiZ.jpg)
Aluminum Base Example
(http://i.imgur.com/4Z0dTHe.jpg)
Custom Rubber Feet w/ 3M tape
(http://i.imgur.com/gz6y9yx.jpg)
(http://i.imgur.com/Rt76oHx.jpg)
Pricing for the Case
Optional Addons / Changes
Pricing for the Case includes
PCB Specs
Possible Layouts
(https://i.imgur.com/kqb4ySi.png)
Case/Plate Specifications
Extra Information
Shipping calculated for 5lbs (with only base kit)
Special Note: Shipping will be charged be differently per order Internationally. ConUS is flat rate up to 10lbs. Custom Boxes are used.
Timeline
Estimated Group Buy Period : Approximately 10 - 12 Weeks.
Hey all,
Sign up for our Mailing List to get informed on new product launches. It's located at the TOP BAR. - https://www.keyclack.com/
I've been teasing this on r/mk & my instagram (@keyclack) for a while.
This project has been made with Rama. He has been such a huge help with getting this up & running.
Current status
- Soon
RAMABAE65 - Made with RAMA
Album - http://imgur.com/a/aXYCB
(http://i.imgur.com/nYWI0n7.jpg)
(http://i.imgur.com/nbxOxNb.jpg)
(http://i.imgur.com/FyF4Epa.jpg)
(http://i.imgur.com/p5c3uiZ.jpg)
Aluminum Base Example
(http://i.imgur.com/4Z0dTHe.jpg)
Custom Rubber Feet w/ 3M tape
(http://i.imgur.com/gz6y9yx.jpg)
(http://i.imgur.com/Rt76oHx.jpg)
Sandwich Case Option
Album - http://imgur.com/a/WePCr
(http://i.imgur.com/kkIEaPK.jpg)
Pricing
Optional Addons / Changes
Pricing for the Case includes
Shipping calculated 5lbs (with only base kit)
PCB Specs
Possible Layouts
(https://i.imgur.com/kqb4ySi.png)
Case/Plate Specifications
Color Options
Renders
http://bit.ly/M65-A (http://bit.ly/M65-A)
M65-A - Made with RAMA
Full Album - http://imgur.com/a/aXYCB
The keycap sets that are featured are: Hyperfuse by CtrlAlt.io + Hacked by Geeks by JDCarpe
(http://i.imgur.com/nYWI0n7.jpg)
(http://i.imgur.com/lQQmEmc.jpg)
(http://i.imgur.com/nbxOxNb.jpg)
(http://i.imgur.com/FyF4Epa.jpg)
(http://i.imgur.com/p5c3uiZ.jpg)
Aluminum Base Example
(http://i.imgur.com/4Z0dTHe.jpg)
Custom Rubber Feet w/ 3M tape
(http://i.imgur.com/gz6y9yx.jpg)
(http://i.imgur.com/Rt76oHx.jpg)
Pricing for the Case
- M65-A aka Ramabae65 $210 w/ Nylon Base
- M65-A aka Ramabae65 $230 w/ Aluminum Base (Does not support RGB underglow)
- PCB $40.00
Optional Addons / Changes
- Extra Aluminum Base $85 + shipping
- Brushed Brass Switch Plate (instead of Alu6061 Switch Plate) +$35.00 + shipping
Pricing for the Case includes
- Top Alu Case
- Nylon or Alu Base
- Brass weight with PVD Plating
- Universal Plate
- 2x Custom Molded Feet
- Screws
PCB Specs
- RGB underglow
- LED compatible
- Black w/ Gold Traces
- ps2avrgb firmware by Winkeyless.kr
- winkeyless.kr/partner/ (http://winkeyless.kr/partner/)
Possible Layouts
(https://i.imgur.com/kqb4ySi.png)
Case/Plate Specifications
- 8 Degree tilt
- Switch Top Opening
- PCB Mount Stabs
Extra Information
- Silver Screws for Champagne, Rose Gold, and Silver
- Black Screws for Matte Jet Black, Space Grey, and Hydro Blue.
- Pantone xxx Rubber Feet for Champagne, Silver
- Pantone xxx Rubber Feet for Space Grey, Hydro Blue, and Black
- Pantone xxx Rubber Feet for Rose Gold
Shipping calculated for 5lbs (with only base kit)
Special Note: Shipping will be charged be differently per order Internationally. ConUS is flat rate up to 10lbs. Custom Boxes are used.
- $25 USPS ConUS
- $xx DHL International
Timeline
Estimated Group Buy Period : Approximately 10 - 12 Weeks.
- January 7 - 11: Accept Submissions
- January 12-14: Invoicing
- January 15-17: Submit Payment
- About 50 work days later (excluding CNY 1-23 to 2-8 & Freight Time): Bulk Shipment Arrives
- About 1 Week: QC for all the parts.
- About 3 Days: Shipping
More
Hey all,
Sign up for our Mailing List to get informed on new product launches. It's located at the TOP BAR. - https://www.keyclack.com/
I've been teasing this on r/mk & my instagram (@keyclack) for a while.
This project has been made with Rama. He has been such a huge help with getting this up & running.
Current status
- Soon
RAMABAE65 - Made with RAMA
Album - http://imgur.com/a/aXYCB
(http://i.imgur.com/nYWI0n7.jpg)
(http://i.imgur.com/nbxOxNb.jpg)
(http://i.imgur.com/FyF4Epa.jpg)
(http://i.imgur.com/p5c3uiZ.jpg)
Aluminum Base Example
(http://i.imgur.com/4Z0dTHe.jpg)
Custom Rubber Feet w/ 3M tape
(http://i.imgur.com/gz6y9yx.jpg)
(http://i.imgur.com/Rt76oHx.jpg)
Sandwich Case Option
Album - http://imgur.com/a/WePCr
(http://i.imgur.com/kkIEaPK.jpg)
Pricing
- M65-A aka Ramabae65 $210 w/ Nylon Base
- M65-A aka Ramabae65 $230 w/ Aluminum Base (Does not support RGB underglow)
- PCB $40.00
- $80 Sandwich case
Optional Addons / Changes
- Extra Aluminum Base $85 + shipping
- Brushed Brass Switch Plate (instead of Alu6061 Switch Plate) +$35.00 + shipping
Pricing for the Case includes
- Top Alu Case
- Nylon/Alu Base
- Brass weight with PVD Plating
- Universal Plate
- 2x Custom Molded Feet
- Screws
Shipping calculated 5lbs (with only base kit)
- $25 ConUS
- $50 USPS International (Canada - Australia)
- $70 USPS International (Countries other than Canada & Australia) + Insured for $600.00l
- $150 Fedex International (Anywhere Non-ConUS) + Insured for $600.00l
- $xxx UPS International (Anywhere Non-ConUS)
PCB Specs
- ps2avrgb
- RGB underglow
- LED compatible
- Black w/ Gold Traces
Possible Layouts
(https://i.imgur.com/kqb4ySi.png)
Case/Plate Specifications
- 8 Degree tilt
- Switch Top Opening
- PCB Mount Stabs
Color Options
- (http://i.imgur.com/lQQmEmc.jpg)
- Space Gray
- Hydro Blue (only for those who joined Hydro at any stage)
- Rose Gold
- Matte Jet Black
- Silver
- Chapmagne
Renders
More
(http://i.imgur.com/jiEJJBi.jpg)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/5814ae74579fb3b8411f5658/5814ae7444024385b4e29c3e/1477750401132/RAMA-161029-COMPRESSED-RAMA-M65-003.563.jpg?format=1500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfb0759cc689a7b44f26f/1477311242181/RAMA-161024-COMPRESSED-RAMA-M65-003.503.jpg?format=1500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5814ae94579fb3b8411f5722/1477750430639/?format=2500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfaf859cc689a7b44f1f9/1477311228932/RAMA-161024-COMPRESSED-RAMA-M65-003.499.jpg?format=1500w)
Colors
We also have MATTE JET BLACK (also known as Matte Black)
Space Gray
(http://i.imgur.com/QVuqWeL.jpg)
Silver
(http://i.imgur.com/yltH76O.jpg)
Rose Gold
(http://i.imgur.com/eEsUP3v.jpg)
Champagne
(http://i.imgur.com/IL03oFE.jpg)
Matte Black
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/581c9eba197aeafe6664d873/1478270674534/RAMA-161105-COMPRESSED-RAMA-M65-003.567.jpg?format=1500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/5814ae74579fb3b8411f5658/5814ae7444024385b4e29c3e/1477750401132/RAMA-161029-COMPRESSED-RAMA-M65-003.563.jpg?format=1500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfb0759cc689a7b44f26f/1477311242181/RAMA-161024-COMPRESSED-RAMA-M65-003.503.jpg?format=1500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5814ae94579fb3b8411f5722/1477750430639/?format=2500w)
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfaf859cc689a7b44f1f9/1477311228932/RAMA-161024-COMPRESSED-RAMA-M65-003.499.jpg?format=1500w)
Colors
We also have MATTE JET BLACK (also known as Matte Black)
Space Gray
(http://i.imgur.com/QVuqWeL.jpg)
Silver
(http://i.imgur.com/yltH76O.jpg)
Rose Gold
(http://i.imgur.com/eEsUP3v.jpg)
Champagne
(http://i.imgur.com/IL03oFE.jpg)
Matte Black
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/581c9eba197aeafe6664d873/1478270674534/RAMA-161105-COMPRESSED-RAMA-M65-003.567.jpg?format=1500w)
Post by: Sifo on Thu, 03 November 2016, 21:51:55
Post by: jchan94 on Thu, 03 November 2016, 21:53:48
plate mount stabs is a strange choice, and screws on the side is a strange aesthetic choice... but looks neat. not for me but good luck
We have tray style tada compatibility, and it will be easier for 1st time builders as they can forget.
edit: will probably change this.
Post by: xondat on Thu, 03 November 2016, 21:53:58
Post by: Slash Emperor on Thu, 03 November 2016, 22:09:34
Post by: Vigrith on Thu, 03 November 2016, 22:11:37
Post by: jchan94 on Thu, 03 November 2016, 22:14:41
This looks fantastic, it's a shame I'm inept when it comes to building stuff like this - choices are so heavily narrowed when I need my boards to come assembled. Best of luck though Joseph, as said this is beautiful.
I might do some assembly. A lot of people have PM'd me about it so maybe I'll have a little assembly party of this :P. we'll see when it comes around.
Glad you like it!
Post by: BAS1C on Thu, 03 November 2016, 22:24:12
This looks fantastic, it's a shame I'm inept when it comes to building stuff like this - choices are so heavily narrowed when I need my boards to come assembled. Best of luck though Joseph, as said this is beautiful.
I'd gladly build one for you if you covered all of your expenses! This thing is a dream :O.
JChan, did you REALLY need to run an IC? heh. Bring on the GB dude =D so stoked! HYPE.
Oh yeah, is there gonna be a harambe engraving option?
Post by: Vigrith on Thu, 03 November 2016, 22:27:11
I might do some assembly. A lot of people have PM'd me about it so maybe I'll have a little assembly party of this :P. we'll see when it comes around.
Glad you like it!
Oh. Oh, now we talking. Please do let me know if you get the assembly party going, everything about it is amazing - sort of convinced myself I didn't need more 60 ish boards after my r1 WhiteFox but... Clearly, I lied. As usual. ^-^
The Rose Gold case though..... mmmmmmmmmmm.
Post by: Fetty AWP on Thu, 03 November 2016, 22:45:34
Post by: potatobot on Thu, 03 November 2016, 22:53:48
65% Hype train! WOHOO
Post by: sachin3767 on Thu, 03 November 2016, 23:36:34
Just sad to see no ISO love.
Post by: JDragon on Fri, 04 November 2016, 00:40:12
The option to use PCB mount stabs would be appreciated.
Post by: luckyryan333 on Fri, 04 November 2016, 00:46:03
q1. Why POM? Why not add AL6061 option for base?
q2. ps2avr? PCB from WKL store, or from your own one?
q3. Can't tell if enclosure combines with its plate or not?
Post by: jchan94 on Fri, 04 November 2016, 00:46:32
I want all the colors :O
The option to use PCB mount stabs would be appreciated.
We're changing it to support PCB mount stabs now. Not an issue :P. We had both plates done.
Post by: jchan94 on Fri, 04 November 2016, 00:52:15
You got my attention, and make bros love 65% excited.
q1. Why POM? Why not add AL6061 option for base?
q2. ps2avr? PCB from WKL store, or from your own one?
q3. Can't tell if enclosure combines with its plate or not?
1) Pom because RGB. It will shine through.
2) I don't think WKL makes a 65% ps2avr.
3) Enclosure is not combined with plate. They are separate.
Post by: luckyryan333 on Fri, 04 November 2016, 01:13:29
You got my attention, and make bros love 65% excited.
q1. Why POM? Why not add AL6061 option for base?
q2. ps2avr? PCB from WKL store, or from your own one?
q3. Can't tell if enclosure combines with its plate or not?
1) Pom because RGB. It will shine through.
>> Got you. Any plan to offer AL6061 option for base?
2) I don't think WKL makes a 65% ps2avr.
>> Exactly. Guess this PCB comes from your own source. Any plan to support other 65% PCB like Fi****?
3) Enclosure is not combined with plate. They are separate.
>> Actually not prefer kinda enclosure. Glad to hear that.
Prepare to get on 65% HYPE train, too. :)
Post by: effectiveduck on Fri, 04 November 2016, 01:44:01
Post by: jchan94 on Fri, 04 November 2016, 01:50:44
You got my attention, and make bros love 65% excited.
q1. Why POM? Why not add AL6061 option for base?
q2. ps2avr? PCB from WKL store, or from your own one?
q3. Can't tell if enclosure combines with its plate or not?
1) Pom because RGB. It will shine through.
>> Got you. Any plan to offer AL6061 option for base?
2) I don't think WKL makes a 65% ps2avr.
>> Exactly. Guess this PCB comes from your own source. Any plan to support other 65% PCB like Fi****?
3) Enclosure is not combined with plate. They are separate.
>> Actually not prefer kinda enclosure. Glad to hear that.
Prepare to get on 65% HYPE train, too. :)
We don't plan on the aluminum bottom for r1. But maybe r2? Who knows! It's very possible but we want to keep this a little management for the options.
I'll really have to review this once pricing finalizes.
Damn... I'm actually kind of speechless right now, this is so beautiful. When and how much?
November. Pricing will be released once it settles and samples are in.
Post by: derzemel on Fri, 04 November 2016, 02:00:23
Split Spacebar?
edit: If these are not planned for R1, but you are considering them in R2, then I am definitely down for R2
Post by: effectiveduck on Fri, 04 November 2016, 02:02:25
Damn... I'm actually kind of speechless right now, this is so beautiful. When and how much?
November. Pricing will be released once it settles and samples are in.
Just to clarify is that for rama's design or the floating desgin?
Post by: jchan94 on Fri, 04 November 2016, 02:04:38
Damn... I'm actually kind of speechless right now, this is so beautiful. When and how much?
November. Pricing will be released once it settles and samples are in.
Just to clarify is that for rama's design or the floating desgin?
Rama design is pending pricing. Sandwich/floating design with alu plates is gonna be $110 with pcb and stabs without shipping.
ISO? (European here :-P )
Split Spacebar?
edit: If these are not planned for R1, but you are considering them in R2, then I am definitely down for R2
Sorry mate. No iso.
Edit. No split spacebar, only split backspace
Post by: Den441 on Fri, 04 November 2016, 02:45:11
Post by: jchan94 on Fri, 04 November 2016, 03:10:06
This thing is literally a dream as BAS1C said above. My favorite part about it is that bottom POM plate seems thin, so led effect will be subtle which won't distract too much from the design of case itself. Best of both worlds. You can tell a lot went in to the design of this case and I really appreciate the attention to detail. There are definitely more modern design elements, but the wider bezel gives it that vintage rock solid look. I'm probably going for a space grey. Not sure what switches and caps yet though. Great work jc and RAMA! Groundbreaking stuff here.
Pom base! Aluminum plate.
Rama had a video of him showing the material shining through some leds. It looks good. I'll find the video and post it.
Post by: kawasaki161 on Fri, 04 November 2016, 03:38:20
Also, since I'm pretty new to the community tbh (really started getting into it in March this year) I have a question for the elders, was it always so stacked with new stuff? It seems like every month ends up offering more stuff than the last one (and my student wallet does not like this at all).
Post by: oatmicro on Fri, 04 November 2016, 05:19:19
so many interesting products from RAMA made me feel happy.
Space Grey is very interesting. :eek:
Post by: pr0ximity on Fri, 04 November 2016, 06:44:14
Post by: duynguyenle on Fri, 04 November 2016, 07:04:20
Post by: sony on Fri, 04 November 2016, 07:59:33
Post by: jal on Fri, 04 November 2016, 08:45:23
Post by: waqar on Fri, 04 November 2016, 11:28:27
Post by: xondat on Fri, 04 November 2016, 12:02:41
Oh split spacebar? You didn't tease that.Where is the split spacebar?
Post by: sony on Fri, 04 November 2016, 12:12:46
https://geekhack.org/index.php?topic=85629.msg2296220.msg#2296220Oh split spacebar? You didn't tease that.Where is the split spacebar?
Might be r2.
Post by: romevi on Fri, 04 November 2016, 12:56:47
Post by: pixelpusher on Fri, 04 November 2016, 13:19:15
Currently waiting on my Sentraq 60 to build my first underglow board with hyperfuse, so you know I'm digging on these photos! I'll totally have to buy one, although in now a span of just 1 year after joining Geekhack, I went from 1 keyboard to now 7, 3 of which I built myself and 9 keycap sets. WHY YOU DO THIS TO ME?
Post by: doostin on Fri, 04 November 2016, 14:52:16
Post by: Overchecken8 on Fri, 04 November 2016, 16:30:32
There isn't one...? Not too sure where he got that from.Oh split spacebar? You didn't tease that.Where is the split spacebar?
Post by: Mr.Lunchbox on Fri, 04 November 2016, 17:17:02
There isn't one...? Not too sure where he got that from.Oh split spacebar? You didn't tease that.Where is the split spacebar?
Maybe confused spacebar with backspace?
Post by: Overchecken8 on Fri, 04 November 2016, 17:30:05
Yeah I think it's either that or split shift. Either way I like having both those options.There isn't one...? Not too sure where he got that from.Oh split spacebar? You didn't tease that.Where is the split spacebar?
Maybe confused spacebar with backspace?
Post by: iRumy3 on Fri, 04 November 2016, 19:57:00
Post by: dbucklin on Fri, 04 November 2016, 21:37:29
Post by: Auxo on Fri, 04 November 2016, 23:05:00
Post by: laminam on Fri, 04 November 2016, 23:13:10
Post by: Dominathan on Sat, 05 November 2016, 06:40:10
Post by: ticktwo on Sat, 05 November 2016, 10:23:09
Post by: lishi on Sat, 05 November 2016, 16:48:22
Post by: __ on Sat, 05 November 2016, 18:55:09
Post by: kolashnikov on Sat, 05 November 2016, 19:52:32
If the plate is not part of the enclosure, will we be able to order the two in different colors? e.g., black case, silver plate?
q3. Can't tell if enclosure combines with its plate or not?
3) Enclosure is not combined with plate. They are separate.
Post by: jchan94 on Sat, 05 November 2016, 23:37:21
Planning to join as long as the price isn't astronomical.
If the plate is not part of the enclosure, will we be able to order the two in different colors? e.g., black case, silver plate?
q3. Can't tell if enclosure combines with its plate or not?
3) Enclosure is not combined with plate. They are separate.
Added the Matte Black Render.
Also, I don't know if we'll have these options to choose different plates. It kind of creates an inbalance of units ordered and complicates things to some extent :P.
I'll consider it.
Post by: Krelbit on Sat, 05 November 2016, 23:45:50
Post by: forevermadrigal on Sat, 05 November 2016, 23:49:21
Post by: jchan94 on Sun, 06 November 2016, 03:06:37
Are you guys getting samples of all colorways or just certain ones?
Samples of 1, then sample chips of each other color to compare.
A sample of all would be too expense :(
Post by: Quackles on Sun, 06 November 2016, 03:18:28
Post by: forevermadrigal on Sun, 06 November 2016, 03:32:15
All good, I can't wait to see those sexy samples :pAre you guys getting samples of all colorways or just certain ones?
Samples of 1, then sample chips of each other color to compare.
A sample of all would be too expense :(
Post by: bnthor on Sun, 06 November 2016, 12:33:22
Post by: breckstar on Tue, 08 November 2016, 06:08:44
Post by: Atredl on Wed, 09 November 2016, 00:14:10
Post by: onmybikedrunk on Wed, 09 November 2016, 14:18:16
Post by: jchan94 on Wed, 09 November 2016, 22:13:32
Post by: Vigrith on Wed, 09 November 2016, 22:21:42
Post by: jchan94 on Wed, 09 November 2016, 22:28:44
Pricing looks juicy! Looking forward to more deets in case you manage to get the assembly party together, that matte black case looking sexy af too.
Will have photos once the sample comes in sometime between Nov 18-Nov 22 (Estimation).
Post by: rpeterclark on Thu, 10 November 2016, 06:43:14
Post by: __ on Thu, 10 November 2016, 19:35:21
Post by: Vadurr on Fri, 11 November 2016, 02:28:32
Post by: jackie321304 on Fri, 11 November 2016, 20:45:09
Post by: mll8394 on Sun, 13 November 2016, 04:40:03
Post by: jchan94 on Wed, 16 November 2016, 03:10:02
Photo of the progress of the sample. Will ship to us soon.
Post by: waqar on Wed, 16 November 2016, 13:46:15
Post by: pixelpusher on Wed, 16 November 2016, 14:20:53
Show Image(http://i.imgur.com/baRJCz1.jpg)
Photo of the progress of the sample. Will ship to us soon.
So this is the bottom where the POM/acrylic layer would screw in to the four screw holes pictured, correct? Exciting progress, no doubt.
Post by: dilbertprogrammer on Wed, 16 November 2016, 17:39:24
Post by: jchan94 on Thu, 17 November 2016, 01:29:33
Show Image(http://i.imgur.com/baRJCz1.jpg)
Photo of the progress of the sample. Will ship to us soon.
So this is the bottom where the POM/acrylic layer would screw in to the four screw holes pictured, correct? Exciting progress, no doubt.
Yessir.
Also, we're updating the plate and PCB to support a tad more for the GB. Looks exciting!
Post by: Jumie on Thu, 17 November 2016, 03:17:57
Post by: jchan94 on Thu, 17 November 2016, 03:21:33
Can I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Post by: forevermadrigal on Thu, 17 November 2016, 03:23:51
If this happens, you are a god jchanCan I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Post by: jchan94 on Thu, 17 November 2016, 03:25:13
If this happens, you are a god jchanCan I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Will try our best! We can only move so many things around with what we have currently, but I really want it to happen.
Post by: luckyryan333 on Thu, 17 November 2016, 03:32:48
If this happens, you are a god jchanCan I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Will try our best! We can only move so many things around with what we have currently, but I really want it to happen.
Any chance to support an another 65% PCB like Finger...? :)
Post by: jchan94 on Thu, 17 November 2016, 03:35:13
If this happens, you are a god jchanCan I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Will try our best! We can only move so many things around with what we have currently, but I really want it to happen.
Any chance to support an another 65% PCB like Finger...? :)
O: donut have 1 or even the reference files for it :P so doubt.
Post by: luckyryan333 on Thu, 17 November 2016, 03:47:01
If this happens, you are a god jchanCan I use RS68 pcb for this?
We're trying to add the mounting holes to support it, but I cannot 100% confirm about it until we receive our sample.
The RS68 PCB is a tad longer (not wider) and only 2 holes line up :P
Will try our best! We can only move so many things around with what we have currently, but I really want it to happen.
Any chance to support an another 65% PCB like Finger...? :)
O: donut have 1 or even the reference files for it :P so doubt.
Actually I have some dxf files for Finger, but I'm not sure if it will be helpful or not...
If you need them, let me get your email address. PM me. ;D
Post by: ntw on Thu, 17 November 2016, 04:26:11
Post by: duynguyenle on Thu, 17 November 2016, 04:40:52
will the final product made by CNC machining or injection molded?
Injection moulded aluminium, say what??? You mean die-cast?
Post by: xondat on Thu, 17 November 2016, 08:07:13
Think he meant the nylon.will the final product made by CNC machining or injection molded?
Injection moulded aluminium, say what??? You mean die-cast?
Post by: duynguyenle on Thu, 17 November 2016, 08:12:16
Think he meant the nylon.will the final product made by CNC machining or injection molded?
Injection moulded aluminium, say what??? You mean die-cast?
Oh now that I think about it, that makes sense...
Still, moulds are expensive to engineer and manufacture. For a product of this type, injection moulding is impractical
Post by: ntw on Thu, 17 November 2016, 08:14:36
Post by: duynguyenle on Thu, 17 November 2016, 08:24:22
sorry for the confusion, i meant for both the alu n nylon part
My previous comment applies. For an exceedingly low volume product like this, it's most likely milled
Post by: jchan94 on Thu, 17 November 2016, 17:44:31
sorry for the confusion, i meant for both the alu n nylon part
My previous comment applies. For an exceedingly low volume product like this, it's most likely milled
This is correct.
Post by: switchnollie on Thu, 17 November 2016, 21:51:37
Post by: sachin3767 on Fri, 18 November 2016, 02:56:40
Did I miss an update from you somewhere? Looks like you've added ISO support for the layout.
Does that go for the Rama case too?
If so, that is super f*cking cool of you.
Post by: jchan94 on Fri, 18 November 2016, 04:32:35
@Jchan
Did I miss an update from you somewhere? Looks like you've added ISO support for the layout.
Does that go for the Rama case too?
If so, that is super f*cking cool of you.
Yessir. We're adding it to the plate + PCB for the GB.
Post by: diiiP on Fri, 18 November 2016, 04:42:48
@Jchan
Did I miss an update from you somewhere? Looks like you've added ISO support for the layout.
Does that go for the Rama case too?
If so, that is super f*cking cool of you.
Yessir. We're adding it to the plate + PCB for the GB.
And i'm in :thumb:
Post by: duynguyenle on Fri, 18 November 2016, 05:23:40
@Jchan
Did I miss an update from you somewhere? Looks like you've added ISO support for the layout.
Does that go for the Rama case too?
If so, that is super f*cking cool of you.
Yessir. We're adding it to the plate + PCB for the GB.
Jchan for president 2020!!! :thumb:
ISO support is the icing on the cake (I was gutted when I got my PS2AVR order in and finding out it doesn't support split left shift :( )
Post by: Biggestmac on Fri, 18 November 2016, 10:35:31
Post by: jchan94 on Mon, 21 November 2016, 04:52:42
This is looking so good, I can't wait! How long will the GB be open for when it goes up?
dont know! still waiting for a solid prototype.
Pricing is changing however. We have to go with a better manufacturer as we've run into some issues that are not acceptable for the quality we want.
Post by: jchan94 on Thu, 24 November 2016, 01:21:37
Here's some updates so you know that this project is still in progress.
1) We have to switch manufacturers due to a lack of quality we saw with the Nylon
2) Our first sample was changed to 100% aluminum and ships out on Tuesday.
3) Our second sample (from the manufacturer who has quality control on Nylon) ships out next Friday.
With the better manufacturer, we will have a small price bump of about $30.00 USD for the case.
More pics to come & happy holidays to all
Post by: aznreaper on Thu, 24 November 2016, 01:44:51
Post by: Diokhan on Thu, 24 November 2016, 02:01:45
Original price from the first post is gone now, can you give us a ballpark number for what it'll look like for pricing?
This :)
I would like a rough estimate, so I can save up a bit haha.
Looking neat tho.
Post by: jchan94 on Thu, 24 November 2016, 02:15:07
Original price from the first post is gone now, can you give us a ballpark number for what it'll look like for pricing?
This :)
I would like a rough estimate, so I can save up a bit haha.
Looking neat tho.
Original pricing IIRC was:
$175 @ 100 units
$165 @ 200 units
PCB - $50.00
New pricing for only the Case is:
$210 @ 100 units
$195 @ 200 units
$170 @ 300 units.
So it went up $35 & $30 for each. Not a huge dent, but one nonetheless.
Shipping ConUS is about $20.00 IIRC (don't quote me) at about 4LBS.
Shipping International is most likely $45.00 via USPS at about 4LBS.
This is ballpark of everything. I want to be 100% transparent with this. This is a premium case designed by the best industrial designer we all know and love, so quality is at the top of all of this. I hope ya'll understand that we had to switch manufacturers as the quality of the nylon from the 1st was unacceptable.
Post by: Diokhan on Thu, 24 November 2016, 02:17:34
Original price from the first post is gone now, can you give us a ballpark number for what it'll look like for pricing?
This :)
I would like a rough estimate, so I can save up a bit haha.
Looking neat tho.
Original pricing IIRC was:
$175 @ 100 units
$165 @ 200 units
PCB - $50.00
New pricing for only the Case is:
$210 @ 100 units
$195 @ 200 units
$170 @ 300 units.
So it went up $35 & $30 for each. Not a huge dent, but one nonetheless.
Shipping ConUS is about $20.00 IIRC (don't quote me) at about 4LBS.
Shipping International is most likely $45.00 via USPS at about 4LBS.
This is ballpark of everything. I want to be 100% transparent with this. This is a premium case designed by the best industrial designer we all know and love, so quality is at the top of all of this. I hope ya'll understand that we had to switch manufacturers as the quality of the nylon from the 1st was unacceptable.
No worries, rather wait and pay a little more than seeing a half assed case being made :)
PCB is pre-soldered?
Post by: jchan94 on Thu, 24 November 2016, 02:20:41
Quote
No worries, rather wait and pay a little more than seeing a half assed case being made :)
PCB is pre-soldered?
Yessir. Black PCB. Gold Trace. And the PCB has been updated to support the layouts we have. We just need to finalize the plate.
Post by: Vadurr on Thu, 24 November 2016, 04:04:40
Post by: fanman888 on Thu, 24 November 2016, 07:38:02
Quote
No worries, rather wait and pay a little more than seeing a half assed case being made :)
PCB is pre-soldered?
Yessir. Black PCB. Gold Trace. And the PCB has been updated to support the layouts we have. We just need to finalize the plate.
Oh damn, black and gold. Noice! :thumb:
Post by: Ashlyn on Thu, 24 November 2016, 20:08:21
Post by: pixelpusher on Thu, 24 November 2016, 22:00:13
Looks great !
dat sig O.o
Brb... gotta play some Overwatch.
Post by: Vigrith on Fri, 25 November 2016, 00:07:44
MFW
(http://www.reactiongifs.com/r/m-i-r.gif)
Post by: breckstar on Sat, 26 November 2016, 20:36:05
Post by: sachin3767 on Sun, 27 November 2016, 17:03:08
[/spoiler]Original price from the first post is gone now, can you give us a ballpark number for what it'll look like for pricing?
This :)
I would like a rough estimate, so I can save up a bit haha.
Looking neat tho.
Original pricing IIRC was:
$175 @ 100 units
$165 @ 200 units
PCB - $50.00
New pricing for only the Case is:
$210 @ 100 units
$195 @ 200 units
$170 @ 300 units.
So it went up $35 & $30 for each. Not a huge dent, but one nonetheless.
Shipping ConUS is about $20.00 IIRC (don't quote me) at about 4LBS.
Shipping International is most likely $45.00 via USPS at about 4LBS.
This is ballpark of everything. I want to be 100% transparent with this. This is a premium case designed by the best industrial designer we all know and love, so quality is at the top of all of this. I hope ya'll understand that we had to switch manufacturers as the quality of the nylon from the 1st was unacceptable.
Pricing is still spot on, really hoping for you and us that these fly like hot cakes! Lets hit that 300+!
Few questions...
1. Do the holtites fit this PCB? these are those solder free components that were up for GB recently.
2. Is it possible to port TMK/ QMK to this PCB? Makes like simple having all boards running on the same code.
3. When is it dropping bruh???
Post by: jchan94 on Sun, 27 November 2016, 21:05:37
[/spoiler]Original price from the first post is gone now, can you give us a ballpark number for what it'll look like for pricing?
This :)
I would like a rough estimate, so I can save up a bit haha.
Looking neat tho.
Original pricing IIRC was:
$175 @ 100 units
$165 @ 200 units
PCB - $50.00
New pricing for only the Case is:
$210 @ 100 units
$195 @ 200 units
$170 @ 300 units.
So it went up $35 & $30 for each. Not a huge dent, but one nonetheless.
Shipping ConUS is about $20.00 IIRC (don't quote me) at about 4LBS.
Shipping International is most likely $45.00 via USPS at about 4LBS.
This is ballpark of everything. I want to be 100% transparent with this. This is a premium case designed by the best industrial designer we all know and love, so quality is at the top of all of this. I hope ya'll understand that we had to switch manufacturers as the quality of the nylon from the 1st was unacceptable.
Pricing is still spot on, really hoping for you and us that these fly like hot cakes! Lets hit that 300+!
Few questions...
1. Do the holtites fit this PCB? these are those solder free components that were up for GB recently.
2. Is it possible to port TMK/ QMK to this PCB? Makes like simple having all boards running on the same code.
3. When is it dropping bruh???
I'll have review the hotlites thing. Those are pretty new so we can look into it.
Unfortunately it on board controller can't support that but we are looking to change it in a future round as tmk and qmk get forked a little more.
Lastly, I believe soon. I got manufacturing photos from the manufacturers just now and will share them tonight for your pleasure viewing.
It is looking fantastic.
Post by: Vigrith on Sun, 27 November 2016, 22:15:09
Also, would it be safe to assume you'll most likely be doing a little assembly when the time comes, JC? Just asking so that I can buy my Milestone XDA kits accordingly to cover this layout tomorrow haha.
Post by: jchan94 on Sun, 27 November 2016, 22:27:15
Glad to hear you'll be having some pictures up later so that I have something to look forward to in the morning!
Also, would it be safe to assume you'll most likely be doing a little assembly when the time comes, JC? Just asking so that I can buy my Milestone XDA kits accordingly to cover this layout tomorrow haha.
Yeah I'll do assembly on it with it and most likely include xda on the build to feature it
Post by: Vigrith on Sun, 27 November 2016, 22:33:35
Yeah I'll do assembly on it with it and most likely include xda on the build to feature it
Ooh, that's gonna look sick! I think my question may have come off a little ambiguous though (my bad), I meant I was wondering if you plan on selling a few of the 65s assembled rather than just as kits as you said you may have a little party going when you receive the parts later down the line.
Post by: luckyryan333 on Sun, 27 November 2016, 23:39:10
Just asking so that I can buy my Milestone XDA kits accordingly to cover this layout tomorrow haha.
Hmm... sounds reasonable. imo :rolleyes:
look forward to fantastic fotoz.
Post by: jchan94 on Mon, 28 November 2016, 09:56:07
Yeah I'll do assembly on it with it and most likely include xda on the build to feature it
Ooh, that's gonna look sick! I think my question may have come off a little ambiguous though (my bad), I meant I was wondering if you plan on selling a few of the 65s assembled rather than just as kits as you said you may have a little party going when you receive the parts later down the line.
Oh I see what you mean now. I thought you meant an assembly photo thing. Well, I'm not 100% sure for now.
We'll have to see when we're ready to launch. Assembling like 20+ boards before literally ruined soldering for me for a little while.
Here are the images! Please note that they are both PRE-ANODIZATION & they are from two different manufacturers.
We're testing each of their aluminum milling quality / tolerance levels.
All are scheduled to be anodized this week and ship out to us this week as well.
Manufacturer #1
(http://i.imgur.com/sGEYU5u.jpg)
(http://i.imgur.com/F6nZytK.jpg)
Manufacturer #2
(http://i.imgur.com/PSSBODS.jpg)
(http://i.imgur.com/nZPkf3B.jpg)
(https://i.imgur.com/B7B0qLU.jpg)
Post by: kawasaki161 on Mon, 28 November 2016, 10:22:05
Is there a possibility of R2 supporting a split spacebar layout (like the TGR910 for example)? And if yes, is there a possibility of an "upgrade kit", so that R1 buyers can just swap the PCB and plate and don't have to get another case?
Post by: yuktsi on Mon, 28 November 2016, 11:52:58
I NEED this :thumb:
Post by: Vigrith on Mon, 28 November 2016, 13:20:51
Oh I see what you mean now. I thought you meant an assembly photo thing. Well, I'm not 100% sure for now.
We'll have to see when we're ready to launch. Assembling like 20+ boards before literally ruined soldering for me for a little while.
Roger roger, absolutely understandable. Was just curious as I said seeing as I'll be getting an M10 to match the 65 and need to get a couple extra XDA kits to fit the layout - I'll just do both those things and hope there's a chance you'll have recovered from the soldering nightmare by the time you're ready to launch. :D
Photos are looking good, looking forward to more!
Post by: jchan94 on Mon, 28 November 2016, 13:35:11
It seems like I won't be getting a 910 for myself. :(
I NEED this :thumb:
Damn that means a lot coming from you. But again, all the props go to Rama for designing this beautiful case.
I'm really hyped for this, it really looks good. Though, I've got a few questions.
Is there a possibility of R2 supporting a split spacebar layout (like the TGR910 for example)? And if yes, is there a possibility of an "upgrade kit", so that R1 buyers can just swap the PCB and plate and don't have to get another case?
I've looked into this, and I believe it may be possible. I'm looking into the split spacebars but I can't find anything regarding the stabilizers which is the main issue. I. E. 3u stabs
Its definitely a new push into customs that I find truly fascinating. The pcb can support it if we added a few things, but I'd say it's hard to support without sourcing the proper stabilizers.
Glad to see your excitement!
Post by: jchan94 on Mon, 28 November 2016, 13:36:41
Oh I see what you mean now. I thought you meant an assembly photo thing. Well, I'm not 100% sure for now.
We'll have to see when we're ready to launch. Assembling like 20+ boards before literally ruined soldering for me for a little while.
Roger roger, absolutely understandable. Was just curious as I said seeing as I'll be getting an M10 to match the 65 and need to get a couple extra XDA kits to fit the layout - I'll just do both those things and hope there's a chance you'll have recovered from the soldering nightmare by the time you're ready to launch. :D
Photos are looking good, looking forward to more!
I've committed to the m10 and glad to see others in on it as well!
I'll probably be purchasing extra kits that work with 65% for xda as on option to add into.
Post by: yuktsi on Mon, 28 November 2016, 13:37:55
Bro it uses only 2u stabs. You can see more at the LZ SQ IC thread.It seems like I won't be getting a 910 for myself. :(
I NEED this :thumb:
Damn that means a lot coming from you. But again, all the props go to Rama for designing this beautiful case.I'm really hyped for this, it really looks good. Though, I've got a few questions.
Is there a possibility of R2 supporting a split spacebar layout (like the TGR910 for example)? And if yes, is there a possibility of an "upgrade kit", so that R1 buyers can just swap the PCB and plate and don't have to get another case?
I've looked into this, and I believe it may be possible. I'm looking into the split spacebars but I can't find anything regarding the stabilizers which is the main issue. I. E. 3u stabs
Its definitely a new push into customs that I find truly fascinating. The pcb can support it if we added a few things, but I'd say it's hard to support without sourcing the proper stabilizers.
Glad to see your excitement!
:p
Post by: jchan94 on Mon, 28 November 2016, 13:39:08
Time to update everything then.
Post by: onmybikedrunk on Mon, 28 November 2016, 13:46:18
Post by: Vigrith on Mon, 28 November 2016, 13:51:49
I've committed to the m10 and glad to see others in on it as well!
I'll probably be purchasing extra kits that work with 65% for xda as on option to add into.
Oh really! That's very cool, I guess we'll see what happens then, if worst comes to worst and you don't do any assembly at all I'll probably be able to find a friend who can solder the board for me.
The split spacebars aren't really something I'm into but I'm glad to hear you may be able to support the layout, it seems to be a trend lately and a lot of people are keen on!
Indeed, glad to see you also committed to the M10 - Rama's work is incredible and I'm sure the JC65 and his macropad will have a permanent spot on either my office or home desk, I hope both those creations come to see the success I believe they deserve.
Post by: kawasaki161 on Mon, 28 November 2016, 14:02:59
I would be pumped if this offered a split spacebar - hell I'm pumped already but this would just do me in.
Exactly my line of thought, this is a really nice board by itself, but split spacebar would just be that extra topping you always want but never seem to get your hands on.
The split spacebar just makes for really easy access for the function layers, which is really helpful for a layout that relies on a 1,75u right shift with an up-arrow next to it which prevents HHKB like FN placement.
Post by: JDragon on Mon, 28 November 2016, 14:23:38
Post by: Vigrith on Mon, 28 November 2016, 14:31:26
To double check - the Rose Gold on the M10 currently on MassDrop will match the Rose Gold of the JC65?
Spoke to Rama about the subject (colours for the cases and matching the M10 to the 65 in general) and yea it will be the same, he didn't say that ipsis verbis but if that wasn't the case I'm sure he'd have mentioned it to me.
Post by: jchan94 on Mon, 28 November 2016, 19:56:38
To double check - the Rose Gold on the M10 currently on MassDrop will match the Rose Gold of the JC65?
To double check - the Rose Gold on the M10 currently on MassDrop will match the Rose Gold of the JC65?
Color matching is always up to the manufacturer and can vary on a case by case basis. With the popularity of the Apple color line, many manufacturers are aware of them as reference colors nowadays.
In any case, they should be close with a low margin of error, despite being in different batches of anodization, and probably different manufacturers.
Post by: jchan94 on Tue, 29 November 2016, 02:55:35
Manufacturer #1 just returned some anodization photos!
This is made in Space Gray & Silver
(http://i.imgur.com/EBAFXtk.jpg)
(http://i.imgur.com/nYoT0LC.jpg)
(http://i.imgur.com/O366WOl.jpg)
Post by: sony on Tue, 29 November 2016, 03:01:09
Post by: jchan94 on Tue, 29 November 2016, 03:03:46
Oh that's sexy. Loving that gray, but what I'm really looking forward to is that Special Hydro Edition ;)
that sounds REALLY BLUE
(http://cdn.pocket-lint.com/r/s/970x/assets/images/phptes8tp.png)
Post by: aznreaper on Tue, 29 November 2016, 03:05:29
Post by: Damonskv on Tue, 29 November 2016, 03:06:36
Here are some more photos of where we are at!Wow, looks really cool, now i think should change my mind and also to take part)))
Manufacturer #1 just returned some anodization photos!
This is made in Space Gray & SilverShow Image(http://i.imgur.com/EBAFXtk.jpg)Show Image(http://i.imgur.com/nYoT0LC.jpg)Show Image(http://i.imgur.com/O366WOl.jpg)
Post by: sony on Tue, 29 November 2016, 03:08:00
Post by: finalarcadia on Tue, 29 November 2016, 03:25:54
Post by: smittysteve on Tue, 29 November 2016, 03:41:40
Curious about the bottom material as well. Does this tease that there could be an option for the nylon or aluminum?
Post by: jchan94 on Tue, 29 November 2016, 03:42:53
Samples look very tasty!! :p
Curious about the bottom material as well. Does this tease that there could be an option for the nylon or aluminum?
:P If there's a Alu bottom, then we'll have to cut holes in it. At the moment, I don't want to get super crazy about running a complex GB for this, so unfortunately, I think that will have to wait until R2 when and if that ever happens.
Post by: PoisonKing on Tue, 29 November 2016, 08:32:39
Here are some more photos of where we are at!
Manufacturer #1 just returned some anodization photos!
This is made in Space Gray & SilverShow Image(http://i.imgur.com/EBAFXtk.jpg)Show Image(http://i.imgur.com/nYoT0LC.jpg)Show Image(http://i.imgur.com/O366WOl.jpg)
Dat Space Gray is sick!
(http://i.giphy.com/l2JecAn6DQcLuoZAk.gif)
Post by: pixelpusher on Tue, 29 November 2016, 08:37:01
Post by: catweewee on Tue, 29 November 2016, 10:10:32
Looking good! I'd like to see this gray beside something black so that we can tell just how dark it is. It almost looks black without a reference.
That's your black? ;D ;D ;D
Post by: jchan94 on Tue, 29 November 2016, 10:11:26
Looking good! I'd like to see this gray beside something black so that we can tell just how dark it is. It almost looks black without a reference.
Il go to an apple store to compare all of these when the time comes.
Post by: forevermadrigal on Tue, 29 November 2016, 13:38:12
Post by: jchan94 on Tue, 29 November 2016, 13:42:20
It looks so great and you said the quality was unacceptable. I can only imagine how good the other manufacturer case is gonna look :p
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
Post by: forevermadrigal on Tue, 29 November 2016, 13:44:58
Stoked af. Any news on if it will fit rs68 pcb?It looks so great and you said the quality was unacceptable. I can only imagine how good the other manufacturer case is gonna look :p
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
Post by: jchan94 on Tue, 29 November 2016, 13:49:20
Stoked af. Any news on if it will fit rs68 pcb?It looks so great and you said the quality was unacceptable. I can only imagine how good the other manufacturer case is gonna look :p
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
We looked into it. The PCb mounts are totally different and the PCB sizes are slightly off as well. It's about 1.5mm longer.
For the PCB, it would have originally cost $50.00, but for 1st day participants, it will cost $40.00.
So sorry :(
Post by: forevermadrigal on Tue, 29 November 2016, 13:56:46
It's nothing to be sorry about. You can't accommodate everything as much you want to :) thanks jchanStoked af. Any news on if it will fit rs68 pcb?It looks so great and you said the quality was unacceptable. I can only imagine how good the other manufacturer case is gonna look :p
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
We looked into it. The PCb mounts are totally different and the PCB sizes are slightly off as well. It's about 1.5mm longer.
For the PCB, it would have originally cost $50.00, but for 1st day participants, it will cost $40.00.
So sorry :(
Post by: Vigrith on Tue, 29 November 2016, 14:04:36
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
God damn that grey is sexy as hell. I'm currently planning on getting Rose Gold for both this and the M10 but that grey might just be too good to pass up - also a little more flexible when it comes to looking good with all sorts of different key sets of assorted colours. Will you be receiving samples in other colours too later on by any chance?
Post by: jchan94 on Tue, 29 November 2016, 14:08:40
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
God damn that grey is sexy as hell. I'm currently planning on getting Rose Gold for both this and the M10 but that grey might just be too good to pass up - also a little more flexible when it comes to looking good with all sorts of different key sets of assorted colours. Will you be receiving samples in other colours too later on by any chance?
We will be getting sample colors blocks for the colors we want from both manufacturers. My friends have iPhones so I'll compare it to theirs side to side and post photos of those:).
Post by: Slash Emperor on Tue, 29 November 2016, 15:09:48
Manu #1 had poor nylon quality. It was horrible so we switched the bottom the aluminum or else it'd be a waste to run this with them.
Manu #2 has good nylon quality :)
God damn that grey is sexy as hell. I'm currently planning on getting Rose Gold for both this and the M10 but that grey might just be too good to pass up - also a little more flexible when it comes to looking good with all sorts of different key sets of assorted colours. Will you be receiving samples in other colours too later on by any chance?
I was already going rose gold for the M10 and the JC65, since I don't have a pink keeb yet and the rose gold looks beautiful, but now I want to double dip to get rose gold and gray. I don't have a problem, I swear
Post by: Vigrith on Tue, 29 November 2016, 16:22:54
We will be getting sample colors blocks for the colors we want from both manufacturers. My friends have iPhones so I'll compare it to theirs side to side and post photos of those:).
Great! Thanks for going the extra mile so that we can roughly compare colours prior to order, Joseph.
I was already going rose gold for the M10 and the JC65, since I don't have a pink keeb yet and the rose gold looks beautiful, but now I want to double dip to get rose gold and gray. I don't have a problem, I swear
Yea the rose gold does look stunning and unique, plus according to Rama it is a round 1 exclusive (at least for the M10), but the space grey is SO good. I don't have the money to double dip right now but if I did it'd be 100% both those colours. Gotta figure out which will work best with my key sets, most of which are darker base (currently Granite; Keyboard & Co, Toxic, Miami Dolch and GMK laser soon enough!), rose gold + black is often used in luxury watches and other similar products and I like it very much but a stealthier approach with space grey may be even better. Deciding colours is always the worst part.
Don't worry, I don't have a problem either, trust.
Help me.
Post by: jchan94 on Tue, 29 November 2016, 19:05:30
It looks awesome.
Here's a video of the PCB with the M4-A nylon.
https://vid.me/bAmx
Post by: breckstar on Tue, 29 November 2016, 19:13:56
I got my M4-A yesterday, and here's a video of the PCB for this upcoming GB with Nylon.Looks legit
It looks awesome.
Here's a video of the PCB with the M4-A nylon.
https://vid.me/bAmx
Post by: duynguyenle on Tue, 29 November 2016, 19:44:36
I got my M4-A yesterday, and here's a video of the PCB for this upcoming GB with Nylon.
It looks awesome.
Here's a video of the PCB with the M4-A nylon.
https://vid.me/bAmx
I thought the base was gonna be POM?
Post by: Moderate on Wed, 30 November 2016, 01:03:34
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
Post by: jchan94 on Wed, 30 November 2016, 02:06:41
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
The pricing we got for POM and NYLON were nearly identical, but nylon really diffused well and we felt more comfortable doing it. you can definitely see this in the video above, and it looks awesome.
Everything is coming together now and I'm setting up for the GB stage.
Without knowing how many people will commit to this case, I think it'll have to be run via a Google Document and done via PP invoicing unless we get past 100 submits. If that happens, I'll run it via my store to have a better backend to everything for shipping logistics.
Post by: duynguyenle on Wed, 30 November 2016, 02:27:40
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
The pricing we got for POM and NYLON were nearly identical, but nylon really diffused well and we felt more comfortable doing it. you can definitely see this in the video above, and it looks awesome.
Everything is coming together now and I'm setting up for the GB stage.
Without knowing how many people will commit to this case, I think it'll have to be run via a Google Document and done via PP invoicing unless we get past 100 submits. If that happens, I'll run it via my store to have a better backend to everything for shipping logistics.
Hopefully whatever system you run this on, ordees doesn't close till later in the month (around Dec 21st?)
Post by: jchan94 on Wed, 30 November 2016, 02:35:41
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
The pricing we got for POM and NYLON were nearly identical, but nylon really diffused well and we felt more comfortable doing it. you can definitely see this in the video above, and it looks awesome.
Everything is coming together now and I'm setting up for the GB stage.
Without knowing how many people will commit to this case, I think it'll have to be run via a Google Document and done via PP invoicing unless we get past 100 submits. If that happens, I'll run it via my store to have a better backend to everything for shipping logistics.
Hopefully whatever system you run this on, ordees doesn't close till later in the month (around Dec 21st?)
Looking at the year, I can say that it is starting to close. I am considering everything when I have samples in hand to launch.
There is a likely chance that it'll spill over into 2017 for order collection.
Post by: Caelestic on Wed, 30 November 2016, 04:12:37
Post by: BAS1C on Wed, 30 November 2016, 14:40:14
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
He mentioned a few posts back that cost was about the same but the nylon diffuses the LED light more effectively/in a better way.
Post by: jchan94 on Wed, 30 November 2016, 16:31:54
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
He mentioned a few posts back that cost was about the same but the nylon diffuses the LED light more effectively/in a better way.
Currently we're looking at alternative bottom materials. Looks like the piece is too long and has some "bow" to it! We're currently exploring Frosted acrylic bottoms, but still really want it to be Nylon.
After seeing the M4-A feel and quality of the Nylon, I really hope we can make it possible!
Samples are being sent to rama for the bottom for him to review, and we're trying our best to get this settled in the best way possible so we have everything properly set up before we even start talking about a group buy for this amazing case.
Post by: luckyryan333 on Wed, 30 November 2016, 18:42:35
Nickel Mirror Finish
[attach=1]
Post by: jchan94 on Wed, 30 November 2016, 19:30:12
Any chance to apply this type of surface treatment to JC65?
Nickel Mirror Finish
(Attachment Link)
Sorry, but we will not :( Matching the M10-A is in my sights :)
Post by: luckyryan333 on Wed, 30 November 2016, 20:25:54
Any chance to apply this type of surface treatment to JC65?
Nickel Mirror Finish
(Attachment Link)
Sorry, but we will not :( Matching the M10-A is in my sights :)
:(
Post by: Moderate on Wed, 30 November 2016, 22:53:12
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
He mentioned a few posts back that cost was about the same but the nylon diffuses the LED light more effectively/in a better way.
Ah.. well as you can tell, I definitely read this entire thread. My bad :-[
Currently we're looking at alternative bottom materials. Looks like the piece is too long and has some "bow" to it! We're currently exploring Frosted acrylic bottoms, but still really want it to be Nylon.
After seeing the M4-A feel and quality of the Nylon, I really hope we can make it possible!
"Bow" - is it contracting after machining? Good luck, I hope you guys can sort it out! Nylon would suit perfectly :)
Post by: breckstar on Thu, 01 December 2016, 06:47:43
Post by: gadzkun on Thu, 01 December 2016, 06:59:36
Is sandwich case going live at the same time as Rama case?
i think sandwich case in web was rame case, it just the pic still not edited properly :)
Post by: breckstar on Thu, 01 December 2016, 09:39:31
Is sandwich case going live at the same time as Rama case?
i think sandwich case in web was rame case, it just the pic still not edited properly :)
https://www.keyclack.com/product-category/group-buys/jc65/
;)
Post by: BAS1C on Thu, 01 December 2016, 16:43:48
I thought the base was gonna be POM?
Possibly an availability/cost effectiveness thing? If I'm not mistaken POM is a fair bit more expensive to work with than nylon with minimal benefits or differences in this application.
As long as it achieves the desired light diffusing properties though.. ;D
Btw jchan and rama, great work. This looks like it's coming together very well!
He mentioned a few posts back that cost was about the same but the nylon diffuses the LED light more effectively/in a better way.
Currently we're looking at alternative bottom materials. Looks like the piece is too long and has some "bow" to it! We're currently exploring Frosted acrylic bottoms, but still really want it to be Nylon.
After seeing the M4-A feel and quality of the Nylon, I really hope we can make it possible!
Samples are being sent to rama for the bottom for him to review, and we're trying our best to get this settled in the best way possible so we have everything properly set up before we even start talking about a group buy for this amazing case.
Take all the time you need man - this case is my endgame <3
Post by: vegs on Fri, 02 December 2016, 09:55:47
Post by: nathanrosspowell on Fri, 02 December 2016, 10:02:02
Post by: jchan94 on Fri, 02 December 2016, 23:27:36
Just wanted to update everyone with the following information:
1) We will be processing everything via Google Documents
2) Invoicing via Paypal and Fees
3) Limit of 200 units for R1. R2 will be planned of course, but only after R1 is shipped.
4) Currently updating PCB to include split spacebar and what not.
5) Looks like we'll most likely start this in late December to roll over into January, or we may start in January so we start the new year with a bang :)
6) If you ordered Hydro, we will have a special Hydro Blue edition that will be "really blue" available for you. You can choose the other colors if you really want however.
Post by: nathanrosspowell on Fri, 02 December 2016, 23:34:14
4) Currently updating PCB to include split spacebar and what not.
Sounds interesting. Looking forward to seeing the extra spacebar options :thumb:
Post by: kawasaki161 on Sat, 03 December 2016, 04:03:35
3) Limit of 200 units for R1. R2 will be planned of course, but only after R1 is shipped.
4) Currently updating PCB to include split spacebar and what not.
3) I'll be mad if I miss this, will you post a day before this enters GB stage?
4) WOHOOO, HYPE. Can't wait to see all the options aswell :thumb:
Post by: sony on Sat, 03 December 2016, 04:06:04
6) If you ordered Hydro, we will have a special Hydro Blue edition that will be "really blue" available for you. You can choose the other colors if you really want however.
I did something. Let me make a deposit already.
Post by: wongie on Sat, 03 December 2016, 04:47:48
3) Limit of 200 units for R1. R2 will be planned of course, but only after R1 is shipped.
Any possibility of some unique engraving for R1 buyers like with R1 WhiteFox to make us all fuzzy and special inside?
Post by: PoisonKing on Sat, 03 December 2016, 04:50:30
3) Limit of 200 units for R1. R2 will be planned of course, but only after R1 is shipped.
5) Looks like we'll most likely start this in late December to roll over into January, or we may start in January so we start the new year with a bang :)
Is R1 only for the sandwich case or also alu case?
Post by: sony on Sat, 03 December 2016, 05:06:49
3) Limit of 200 units for R1. R2 will be planned of course, but only after R1 is shipped.
Any possibility of some unique engraving for R1 buyers like with R1 WhiteFox to make us all fuzzy and special inside?
I've heard it's harambe.
Post by: gadzkun on Sat, 03 December 2016, 07:50:59
Post by: clappingcactus on Sat, 03 December 2016, 16:15:36
6) If you ordered Hydro, we will have a special Hydro Blue edition that will be "really blue" available for you. You can choose the other colors if you really want however.
Is there any chance at all that the Blue will be available widely? I know I'm being very selfish and difficult, but it would fit the colour scheme of my next keyboard so well and I don't want to drop $180 just so I can buy the blue aluminum case and then re-sell the keys.
Post by: jchan94 on Sat, 03 December 2016, 16:39:25
6) If you ordered Hydro, we will have a special Hydro Blue edition that will be "really blue" available for you. You can choose the other colors if you really want however.
Is there any chance at all that the Blue will be available widely? I know I'm being very selfish and difficult, but it would fit the colour scheme of my next keyboard so well and I don't want to drop $180 just so I can buy the blue aluminum case and then re-sell the keys.
I thought about this, but hydro was my baby and I want to make it special with a color available only to those who helped make it a reality.
Its a purely selfish decision, I can assure you that, but I hope you understand the reasoning behind it.
Post by: alveeno on Sat, 03 December 2016, 16:54:22
I couldn't support the GB cuz no monies but I would like to get the hydro edition & hydro at a later date
Post by: jchan94 on Sat, 03 December 2016, 17:01:54
So is the hydro edition color going to be available for people who were in the gb or people who also order the set from your website post-gb?
I couldn't support the GB cuz no monies but I would like to get the hydro edition & hydro at a later date
Anyone who has ordered hydro.
Post by: kawasaki161 on Sat, 03 December 2016, 17:02:55
6) If you ordered Hydro, we will have a special Hydro Blue edition that will be "really blue" available for you. You can choose the other colors if you really want however.
Is there any chance at all that the Blue will be available widely? I know I'm being very selfish and difficult, but it would fit the colour scheme of my next keyboard so well and I don't want to drop $180 just so I can buy the blue aluminum case and then re-sell the keys.
I thought about this, but hydro was my baby and I want to make it special with a color available only to those who helped make it a reality.
Its a purely selfish decision, I can assure you that, but I hope you understand the reasoning behind it.
Will the Hydro edition be limited to one per person? If not I can already see people buying multiples and flipping them on mm for profit.
Post by: clappingcactus on Sat, 03 December 2016, 17:16:07
I thought about this, but hydro was my baby and I want to make it special with a color available only to those who helped make it a reality.
Its a purely selfish decision, I can assure you that, but I hope you understand the reasoning behind it.
I understand, Jchan. I'm honestly considering buying Hydro just to support you (it's ridiculous how much effort you put into making this community better). We'll see how my financial situation is doing by the time the JC65 GB goes up.
I'm assuming that when that particular GB goes up, and there are GMK Hydros still left for sale that I can place an order for both simultaneously?
Will the Hydro edition be limited to one per person? If not I can already see people buying multiples and flipping them on mm for profit.
You bring up a good point, but then people are going to be flipping this keyboard for a profit regardless for years to come. Anyone really set on duping people would only have to reanodize a regular colour JC65 if they're that malicious anyway.
Of course JC decides how he handles his GB, but I was just adding my opinion to the conversation.
Post by: rawrjau on Sat, 03 December 2016, 17:20:40
Ill have to tank the shipping, customs, and currency discrepencies, but this is way too beautiful to not be a part of
Post by: jchan94 on Sat, 03 December 2016, 17:26:14
I thought about this, but hydro was my baby and I want to make it special with a color available only to those who helped make it a reality.
Its a purely selfish decision, I can assure you that, but I hope you understand the reasoning behind it.
I understand, Jchan. I'm honestly considering buying Hydro just to support you (it's ridiculous how much effort you put into making this community better). We'll see how my financial situation is doing by the time the JC65 GB goes up.
I'm assuming that when that particular GB goes up, and there are GMK Hydros still left for sale that I can place an order for both simultaneously?Will the Hydro edition be limited to one per person? If not I can already see people buying multiples and flipping them on mm for profit.
You bring up a good point, but then people are going to be flipping this keyboard for a profit regardless for years to come. Anyone really set on duping people would only have to reanodize a regular colour JC65 if they're that malicious anyway.
Of course JC decides how he handles his GB, but I was just adding my opinion to the conversation.
Flipping will always be an issue with limited supply.
R2 will happen though and that should prevent flipping in some capacity.
Post by: sony on Sat, 03 December 2016, 17:32:53
Post by: codedisorg on Sat, 03 December 2016, 22:04:28
Post by: jchan94 on Sat, 03 December 2016, 23:21:21
Damn.. choosing between Hydro and Jet Black is going to be difficult. Though if I get two kits I'll have a place to put 1965...
Considering the idea of flippers, it might be more keen of me to keep the price point at the 100 unit price point so that people opt in less.
In any case, these are things I will have to consider when we are ready to get up and running with everything. I certainly want everyone to have this beautiful case and board, and want to prevent the horrors of the aftermarket
Post by: aznreaper on Sat, 03 December 2016, 23:30:29
Post by: jchan94 on Sat, 03 December 2016, 23:56:57
If you make it so everyone who bought Hydro get's first dibs, then I don't care, that should stop flippers cause they would have had to drop $140+ in order to even get a spot (Or I could just be pushing my agenda since I got a set of Hydro). Otherwise if you plan to have a R2 anyways, I would want you to try and get it priced as low as possible. Make it so people can't buy more than one based on paypal address, geekhack account or something. Lower prices will always be preferred by the mass majority of us :thumb:
That's a good point to be made for Hydro.
Will take it into consideration, but still, I don't like pushing people out.
I'll have to think long and hard about this.
Post by: purrito on Sun, 04 December 2016, 12:09:38
Also, I vote for opening the sale in January. Don't want to assume anyone else's financial/holiday situations, but I'm trying to save up for my friends and family this month!
Post by: breckstar on Sun, 04 December 2016, 13:01:12
Post by: nathanrosspowell on Sun, 04 December 2016, 13:37:09
200 units is a lot of keyboards! jchan has been quite clear that this project is to get a high quality keyboard for a great price point AND he's already mentioned a second round. Maybe he can chime in, but I have no idea why he would want to artificially make the keyboard 'rare'. Sounds like he will get as many made as he can given his schedule.
The issue here is people who will miss the R1 and then feel like they can't wait until R2. Ironically, people in this thread getting heated about missing out will only make people more ravenous to enter R1 on fear of missing out! It will also increase the probability of people wanting to buy from the R1 aftermarket as well.
For the limed edition colorway; you are not entitled to get a blue keyboard just because you have money! jchan spent a lot of time and money to build up to the point where he is able to run this GB, if he wishes to reward the people who helped him get there then so be it! If you want something so badly that you'll pay a crazy amount on the aftermarket, that is not jchan's fault. (note: I didn't buy a Hydro set)
Looking forward to getting a Rose Gold one. If I miss out, no bother, I'll line up for R2 :thumb:
Post by: duynguyenle on Sun, 04 December 2016, 17:45:41
In a perfect world, I'd get both colours, but eh my wallet might have a thing or two to say about that...
Post by: ArchDill on Sun, 04 December 2016, 22:08:26
Price range?
Post by: breckstar on Sun, 04 December 2016, 23:31:52
So sorry if you have already mentioned this but...I thought JC said $210 for the case? Not sure if that is a firm number. PCB is around $50.
Price range?
Post by: KatzenKinder on Mon, 05 December 2016, 01:14:53
Post by: jchan94 on Mon, 05 December 2016, 06:14:07
The nylon looks AMAZING compared to previous samples made.
(https://i.imgur.com/Z56nXFp.jpg)
(https://i.imgur.com/kMyt7RL.jpg)
(https://i.imgur.com/f5IbDGf.jpg)
Post by: breckstar on Mon, 05 December 2016, 06:19:52
Post by: Damonskv on Mon, 05 December 2016, 06:44:50
New photos from manu #2. Making some legit progress now.JC, take a 3/4 pic please, this will be the most convenient angle, which makes the sale
The nylon looks AMAZING compared to previous samples made.Show Image(https://i.imgur.com/Z56nXFp.jpg)Show Image(https://i.imgur.com/kMyt7RL.jpg)Show Image(https://i.imgur.com/f5IbDGf.jpg)
Post by: jchan94 on Mon, 05 December 2016, 06:46:21
New photos from manu #2. Making some legit progress now.JC, take a 3/4 pic please, this will be the most convenient angle, which makes the sale
The nylon looks AMAZING compared to previous samples made.Show Image(https://i.imgur.com/Z56nXFp.jpg)Show Image(https://i.imgur.com/kMyt7RL.jpg)Show Image(https://i.imgur.com/f5IbDGf.jpg)
Photos are from the manufacturer :P. Just pushing an update to show where we are at with the prototypes.
Post by: Damonskv on Mon, 05 December 2016, 06:52:53
It is a pity that does not work, but in any case super cool, the result is incredibly stunning. Would be fun to take a look at more samples of colors, I as a participant in hydro, very excited about the blue oneNew photos from manu #2. Making some legit progress now.JC, take a 3/4 pic please, this will be the most convenient angle, which makes the sale
The nylon looks AMAZING compared to previous samples made.Show Image(https://i.imgur.com/Z56nXFp.jpg)Show Image(https://i.imgur.com/kMyt7RL.jpg)Show Image(https://i.imgur.com/f5IbDGf.jpg)
Photos are from the manufacturer :P. Just pushing an update to show where we are at with the prototypes.
Post by: Jedi on Mon, 05 December 2016, 08:29:25
Post by: Fictiouz on Mon, 05 December 2016, 08:37:11
Definitely looking forward to this. Eventually I'll just sell my body to afford all these GBs :p
Start with a kidney. It's what I did. Also you liver regenerates... do what you will with that information.
Post by: Quackles on Mon, 05 December 2016, 20:29:39
Post by: BAS1C on Tue, 06 December 2016, 00:33:01
New photos from manu #2. Making some legit progress now.
The nylon looks AMAZING compared to previous samples made.
Holy ****! That is AMAZING man. Looking good <3
Post by: stoic-lemon on Tue, 06 December 2016, 08:11:38
Post by: Panzerhawx on Tue, 06 December 2016, 18:52:30
That rose gold is fantastic.
Post by: Perfex on Wed, 07 December 2016, 01:13:53
Post by: jchan94 on Wed, 07 December 2016, 03:15:14
I am defiantly down for this, an aluminum base option would put this over the top.
Ah but you'd lose the underglow.
Is that something you'd prefer ? :O
Post by: sony on Wed, 07 December 2016, 03:17:43
Post by: jchan94 on Wed, 07 December 2016, 04:00:37
The price will be changed with the aluminum, and we have to be requoted for everything since this is a complex group buy.
i.e. 5 Anodization Options, 2 Base Material Options, etc.
In any case, tracking for one sample has been given, and the other is expected to ship tomorrow.
With the year coming to a close, I think it's safe to say we'll launch this in 2017 in January. I don't want to bog down the Holiday season and all with a GB.
The GB will be run on Google Docs.
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
Post by: Damonskv on Wed, 07 December 2016, 05:18:00
We're checking with the manufacturer regarding aluminum bases (does not support underglow).It is strange that rama is not working on brass design ;)
The price will be changed with the aluminum, and we have to be requoted for everything since this is a complex group buy.
i.e. 5 Anodization Options, 2 Base Material Options, etc.
In any case, tracking for one sample has been given, and the other is expected to ship tomorrow.
With the year coming to a close, I think it's safe to say we'll launch this in 2017 in January. I don't want to bog down the Holiday season and all with a GB.
The GB will be run on Google Docs.
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
Post by: jchan94 on Wed, 07 December 2016, 06:26:50
We're checking with the manufacturer regarding aluminum bases (does not support underglow).It is strange that rama is not working on brass design ;)
The price will be changed with the aluminum, and we have to be requoted for everything since this is a complex group buy.
i.e. 5 Anodization Options, 2 Base Material Options, etc.
In any case, tracking for one sample has been given, and the other is expected to ship tomorrow.
With the year coming to a close, I think it's safe to say we'll launch this in 2017 in January. I don't want to bog down the Holiday season and all with a GB.
The GB will be run on Google Docs.
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
To clarify: I mean the brass design for the etching :P. Of course, I'll talk to Rama about it & make sure he signs off on it haha.
Post by: wongie on Wed, 07 December 2016, 06:54:31
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
As if there wasn't reason enough to buy more than 1...
Post by: Perfex on Wed, 07 December 2016, 08:14:29
I am defiantly down for this, an aluminum base option would put this over the top.
Ah but you'd lose the underglow.
Is that something you'd prefer ? :O
I'm willing to bet an aluminum base would be just as popular as the nylon, the whole glowing keyboard thing isn't really my taste... also I think it would be more inline with the M10.
Thank you for considering this :)
Post by: BAS1C on Wed, 07 December 2016, 09:33:42
We're checking with the manufacturer regarding aluminum bases (does not support underglow).
The price will be changed with the aluminum, and we have to be requoted for everything since this is a complex group buy.
i.e. 5 Anodization Options, 2 Base Material Options, etc.
In any case, tracking for one sample has been given, and the other is expected to ship tomorrow.
With the year coming to a close, I think it's safe to say we'll launch this in 2017 in January. I don't want to bog down the Holiday season and all with a GB.
The GB will be run on Google Docs.
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
Hype. That's pretty sweet. If you DO offer an Alu base, can you consider maybe offering both bases with one kit? Harambae would be pleased. I understand this probably complicates things but worth an ask!
Glad you are waiting til the new year.. My wallet has a gaping black hole that is sucking my money away until after Christmas.
Post by: poolside on Wed, 07 December 2016, 15:44:31
Will the jet black case have matching black hex screws?
Post by: nathanrosspowell on Wed, 07 December 2016, 15:55:57
You guys are asking to make it more expensive and more generic looking with a metal bottom.
Stick with the Nylon. It looks great and fits with the M4-A ;)
Post by: Auxo on Wed, 07 December 2016, 16:16:16
Post by: clappingcactus on Wed, 07 December 2016, 17:08:41
With the year coming to a close, I think it's safe to say we'll launch this in 2017 in January. I don't want to bog down the Holiday season and all with a GB.
Lastly, I'm working on the brass design. We'll have 2. 1 for the memers with a Harambae Sketch & 1 that is classical. Pricing will vary with this as well.
Or February, man. There's no rush at all when it comes to wallet recovery. :P
Something that I was thinking would be way cool when it comes to the brass design is two extra brass inserts (with appropriate room for rubber insertion) instead of the 'feet' the keyboard currently has! It would add so much more weight to the keyboard and a unique as all hell bottom aesthetic.
Post by: Zammux on Wed, 07 December 2016, 17:10:25
Post by: megaforce on Wed, 07 December 2016, 17:24:44
Post by: jchan94 on Wed, 07 December 2016, 17:27:26
Isn't this project meant to be an affordable custom?!
You guys are asking to make it more expensive and more generic looking with a metal bottom.
Stick with the Nylon. It looks great and fits with the M4-A ;)
Nylon will definitely make the board more affordable, so I'll have to review the option since making it aluminum drives up the shipping costs + production costs a lot.
I hear the concerns, and I'll try my best to meet the targeted price points despite making changes :). I want to be able to provide the options that people want without compromising the price too much.
I think a good target would be $180 excluding PCB and shipping for how many ever want to join. Aluminum base is being discussed, but that drives up the cost of shipping + per unit pricing.
Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Lastly, I just got tracking for the sample. the other one ships later today to me as well. I think we'll have photos up by next week. Hype!
More to come next week when everything is in my hands. I think we'll be ready for a January GB.
Post by: duynguyenle on Wed, 07 December 2016, 18:07:38
Isn't this project meant to be an affordable custom?!
You guys are asking to make it more expensive and more generic looking with a metal bottom.
Stick with the Nylon. It looks great and fits with the M4-A ;)
Nylon will definitely make the board more affordable, so I'll have to review the option since making it aluminum drives up the shipping costs + production costs a lot.
I hear the concerns, and I'll try my best to meet the targeted price points despite making changes :). I want to be able to provide the options that people want without compromising the price too much.
I think a good target would be $180 excluding PCB and shipping for how many ever want to join. Aluminum base is being discussed, but that drives up the cost of shipping + per unit pricing.
Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Lastly, I just got tracking for the sample. the other one ships later today to me as well. I think we'll have photos up by next week. Hype!
More to come next week when everything is in my hands. I think we'll be ready for a January GB.
I'm good with Nylon to match my M4, and maybe get in on an alu bottom for R2 ;)
Post by: jchan94 on Wed, 07 December 2016, 18:47:48
Isn't this project meant to be an affordable custom?!
You guys are asking to make it more expensive and more generic looking with a metal bottom.
Stick with the Nylon. It looks great and fits with the M4-A ;)
Nylon will definitely make the board more affordable, so I'll have to review the option since making it aluminum drives up the shipping costs + production costs a lot.
I hear the concerns, and I'll try my best to meet the targeted price points despite making changes :). I want to be able to provide the options that people want without compromising the price too much.
I think a good target would be $180 excluding PCB and shipping for how many ever want to join. Aluminum base is being discussed, but that drives up the cost of shipping + per unit pricing.
Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Lastly, I just got tracking for the sample. the other one ships later today to me as well. I think we'll have photos up by next week. Hype!
More to come next week when everything is in my hands. I think we'll be ready for a January GB.
I'm good with Nylon to match my M4, and maybe get in on an alu bottom for R2 ;)
Nylon is definitely my go to.
Also, to answer a question above: no we won't have the option to get both bottoms.
Post by: purrito on Wed, 07 December 2016, 18:51:47
Isn't this project meant to be an affordable custom?!
You guys are asking to make it more expensive and more generic looking with a metal bottom.
Stick with the Nylon. It looks great and fits with the M4-A ;)
Nylon will definitely make the board more affordable, so I'll have to review the option since making it aluminum drives up the shipping costs + production costs a lot.
I hear the concerns, and I'll try my best to meet the targeted price points despite making changes :). I want to be able to provide the options that people want without compromising the price too much.
I think a good target would be $180 excluding PCB and shipping for how many ever want to join. Aluminum base is being discussed, but that drives up the cost of shipping + per unit pricing.
I trust your vision, jchan! I was drawn to this buy b/c of RAMA's kickass design, and I'll bet I'm not the only one. This case super unique compared to the other high profile "end game" alu cases out there. Give us too many options/choice here and we'll quickly turn into "clients from hell." ;)
Nylon, Hydro, Alu, whatever you want, go for it! If this IC is any indication, the buyers will still be here. :thumb:
Post by: gadzkun on Wed, 07 December 2016, 23:15:55
hope the design still had a led diffuser i really like it :D
Post by: luckyryan333 on Thu, 08 December 2016, 02:45:52
Post by: jchan94 on Thu, 08 December 2016, 02:50:06
Looking forward to R2 with Alu base as well as R1 with Nylon next year. ;D
Might all be in 1 go mate :P.
Post by: JDragon on Thu, 08 December 2016, 02:52:50
Post by: sony on Thu, 08 December 2016, 02:54:43
Plz no more options. Just nylon. Don't make me think about things. I have finals.Looking forward to R2 with Alu base as well as R1 with Nylon next year. ;D
Might all be in 1 go mate :P.
Post by: luckyryan333 on Thu, 08 December 2016, 02:59:31
Looking forward to R2 with Alu base as well as R1 with Nylon next year. ;D
Might all be in 1 go mate :P.
Hopefully 1-go with 65% lovers together. ;D
Post by: Belfong on Thu, 08 December 2016, 04:43:26
Post by: jchan94 on Thu, 08 December 2016, 21:45:34
One arrives Friday, I think the other is coming to me on Monday or Tuesday.
We'll have photos up then to compare the two and I'm prepping all the logistics for the group buy to launch in January. Hope everyone is hyped!
Post by: Vigrith on Thu, 08 December 2016, 22:03:23
Hope everyone is hyped!
You have no idea. Glad there'll be a bit of a breather too between the Christmas frenzy and the buy launching, makes it easier for a lot of us! In regards to the bottom material I'm glad you're pondering offering both nylon as well as aluminium - I'd be tempted to go for alu to match the M10 especially but I also want to try under glow as I like the idea of it even though I've never been a fan of leds on keys.
PS: Super excited to see all the samples!
Post by: jchan94 on Thu, 08 December 2016, 22:14:16
Hope everyone is hyped!
You have no idea. Glad there'll be a bit of a breather too between the Christmas frenzy and the buy launching, makes it easier for a lot of us! In regards to the bottom material I'm glad you're pondering offering both nylon as well as aluminium - I'd be tempted to go for alu to match the M10 especially but I also want to try under glow as I like the idea of it even though I've never been a fan of leds on keys.
PS: Super excited to see all the samples!
Ah yes. RAMA has mentioned that I'm crazy for offering SKUs, but I want people to make the board they want.
Finalized pricing will come soon as well with the options
Post by: breckstar on Fri, 09 December 2016, 10:41:58
Finalized pricing will come soon as well with the optionsHype intensifies. I hope I have enough monies for this. Changing apartments in January really throws a wrench in the keeb fund
Post by: forevermadrigal on Fri, 09 December 2016, 13:58:18
Post by: jchan94 on Fri, 09 December 2016, 15:32:36
Post by: Zambumon on Fri, 09 December 2016, 17:05:48
Aha it's estimated to arrive today, but we'll have photos when both arrive.
Excellent! Can't wait to watch more pics of the JC65.
Post by: jchan94 on Sun, 11 December 2016, 21:49:39
Looks like theres a storm in Northwest, causing some delays with customs ~.
We're prepping the GB right now to make sure we have everything in place.
This includes:
1) Design for the Brass Weight.
2) Rubber Feet (Custom Molded)
3) Screws required.
4) Packaging materials.
5) Lastly, updated PCB and plate (this is the most important of course, to include the split spacebar).
6) Shipping prices.
The board weighs about 5lbs (according to Fedex), but we'll just say 6.0 to 6.5lbs (approx 3kg) with PCB and materials.
Domestic is most likely $20.00 (custom boxes because of the shape of the board).
International sounds about $45.00 with USPS; and I'm working on UPS/FEDEX pricing international for those who prefer that to assure shipment arrival.
Post by: pr0ximity on Mon, 12 December 2016, 07:21:07
Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Could you clarify what you mean by plating? These are solid brass with a protectant coating?
Post by: duynguyenle on Mon, 12 December 2016, 07:58:51
Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Could you clarify what you mean by plating? These are solid brass with a protectant coating?
Its a coating applied over the base brass metal, I thought that was quite clear from the post.
Post by: pr0ximity on Mon, 12 December 2016, 08:01:34
Plating can also mean brass plating over another metal, among other things.Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Could you clarify what you mean by plating? These are solid brass with a protectant coating?
Its a coating applied over the base brass metal, I thought that was quite clear from the post.
Post by: duynguyenle on Mon, 12 December 2016, 08:21:51
Plating can also mean brass plating over another metal, among other things.Also, we changed the brass to be PVD coating to make it stronger. This was a suggestion by Rama and the manufacturer since the regular plating would scratch more easily.
Could you clarify what you mean by plating? These are solid brass with a protectant coating?
Its a coating applied over the base brass metal, I thought that was quite clear from the post.
Well its a brass weight (as stated in the post), so I don't see how you could use a brass plating on that... Plating involves deposition of a layer of a dissimilar metal on top of the base parent metal.
Post by: pr0ximity on Mon, 12 December 2016, 08:39:21
Well its a brass weight (as stated in the post), so I don't see how you could use a brass plating on that... Plating involves deposition of a layer of a dissimilar metal on top of the base parent metal.
It was an honest question for jchan, sorry to have inconvenienced you.
Post by: Vigrith on Mon, 12 December 2016, 08:50:41
International sounds about $45.00 with USPS; and I'm working on UPS/FEDEX pricing international for those who prefer that to assure shipment arrival.
Yea, USPS is a little unreliable when it comes to international shipping I feel these days, at least compared to UPS and FedEx both of which are extremely competent (at least in Portugal) - wonder how much it'd cost through those instead, recently bought some tiny custom IEMs (albeit expensive) and FedEx express was actually $70 which is kinda crazy. Still, most likely worth the reassurance and ease of mind, as well as much faster delivery, at least for me personally.
Lastly and at the risk of sounding like a broken record, any word on whether you'll be offering assembly or will you just figure that out once you receive all the materials to ship out further down the line?
Can't wait for the pictures!
Post by: Photoelectric on Mon, 12 December 2016, 13:09:58
Post by: beamingrobot on Mon, 12 December 2016, 21:42:10
International sounds about $45.00 with USPS; and I'm working on UPS/FEDEX pricing international for those who prefer that to assure shipment arrival.
I've had good experiences with DHL Express as well (not ecommerce they suck, my GMK Carbon is still somewhere in the world), not sure about prices though. Definitely willing to pay for good shipping :)
Post by: jchan94 on Mon, 12 December 2016, 22:18:19
International sounds about $45.00 with USPS; and I'm working on UPS/FEDEX pricing international for those who prefer that to assure shipment arrival.
I've had good experiences with DHL Express as well (not ecommerce they suck, my GMK Carbon is still somewhere in the world), not sure about prices though. Definitely willing to pay for good shipping :)
I'll most likely go with UPS International since my office has picks up set for that on a weekly basis.
I'll be calculating the pricing soon when I can weigh everything when its in hand. Just 1-2 more days for photos! :D
I will only allow USPS to deliver to Canada & Australia (and Singapore), but other countries will be "forced" (sad, sorry) to use UPS as they should be more reliable internationally. Don't want this baby to get lost after all !
Lastly, one sample has arrived (from manu #1, the one that can't make good nylon samples). Manu #2 is estimated to arrive tomorrow! Photos to come then!
Post by: jchan94 on Tue, 13 December 2016, 06:18:46
More to come soon when the other arrives. Comparison photos and what not to be taken.
(https://i.imgur.com/5wHCLYk.jpg)
Post by: Fictiouz on Tue, 13 December 2016, 06:32:02
First teaser from manufacturer #1.
More to come soon when the other arrives. Comparison photos and what not to be taken.Show Image(https://i.imgur.com/5wHCLYk.jpg)
OU BABY
Post by: aurora on Tue, 13 December 2016, 06:49:15
First teaser from manufacturer #1.
More to come soon when the other arrives. Comparison photos and what not to be taken.Show Image(https://i.imgur.com/5wHCLYk.jpg)
T H I C C
Post by: luckyryan333 on Tue, 13 December 2016, 07:41:24
First teaser from manufacturer #1.
More to come soon when the other arrives. Comparison photos and what not to be taken.Show Image(https://i.imgur.com/5wHCLYk.jpg)
need MOAR PICS!
Post by: Vigrith on Tue, 13 December 2016, 07:51:30
First teaser from manufacturer #1.
More to come soon when the other arrives. Comparison photos and what not to be taken.Show Image(https://i.imgur.com/5wHCLYk.jpg)
T H I C C
af
Post by: jchan94 on Wed, 14 December 2016, 02:21:03
(https://i.imgur.com/olPg4Xv.jpg)
Post by: Auxo on Wed, 14 December 2016, 02:22:04
1 More Teaser 4 now (Manu #2)Show Image(https://i.imgur.com/olPg4Xv.jpg)
got home just in time to see this baby
hoooooo yeahhhh
Post by: luckyryan333 on Wed, 14 December 2016, 02:27:31
1 More Teaser 4 now (Manu #2 or is it a render...?)Show Image(https://i.imgur.com/olPg4Xv.jpg)
O.M.G
Post by: Dominathan on Wed, 14 December 2016, 04:03:38
1 More Teaser 4 now (Manu #2 or is it a render...?)Show Image(https://i.imgur.com/olPg4Xv.jpg)
~~jizz~~
Post by: Brammm87 on Wed, 14 December 2016, 04:24:39
Not the biggest fan of plate mounted stabs either, but I'll take it.
Post by: jchan94 on Wed, 14 December 2016, 04:29:45
Holy **** this looks good o.O
Not the biggest fan of plate mounted stabs either, but I'll take it.
PCB mount bb.
Post by: Vigrith on Wed, 14 December 2016, 04:54:22
1 More Teaser 4 now (Manu #2 or is it a render...?)Show Image(https://i.imgur.com/olPg4Xv.jpg)
(https://s-media-cache-ak0.pinimg.com/600x315/3e/7b/ce/3e7bce93be21ef811114f8cc6c02866d.jpg)
Post by: rioc on Wed, 14 December 2016, 06:55:49
1 More Teaser 4 now (Manu #2 or is it a render...?)Show Image(https://i.imgur.com/olPg4Xv.jpg)Show Image(https://s-media-cache-ak0.pinimg.com/600x315/3e/7b/ce/3e7bce93be21ef811114f8cc6c02866d.jpg)
oh yes... so nice
Post by: Brammm87 on Wed, 14 December 2016, 07:00:18
oh ****, did not catch that. f yeah.Holy **** this looks good o.O
Not the biggest fan of plate mounted stabs either, but I'll take it.
PCB mount bb.
Post by: nathanrosspowell on Wed, 14 December 2016, 08:05:19
1 More Teaser 4 now (Manu #2 or is it a render...?)Show Image(https://i.imgur.com/olPg4Xv.jpg)
hot HOT HAAAWWT!
(http://25.media.tumblr.com/4f9bed56b49840e416b1034aa9532980/tumblr_mph3yyvP2H1ss3yp1o1_400.gif)
Post by: Caelestic on Wed, 14 December 2016, 08:16:14
Post by: jchan94 on Wed, 14 December 2016, 09:20:15
Thanks for all the love, support & patience. With the Holidays around the corner, I am confirming a January GB period. Estimated turnaround is approximately 12-15 weeks after the period ends. Total length is approximately 16-17 weeks not including transit time to you.
Pricing is approximately $250.00 preshipping with all the parts you need including: Brass Weight, Universal Plate, Top + Bottom Piece, PCB + Cherry PCB stabs. Price changes a tad with Aluminum Base; TBD pricing.
Options will include: 5 Colors (Hydro Blue if eligible) + 2 bottom options (Aluminum or Nylon). Aluminum does not support underglow.
Shipping will be done with USPS at approximately $25-$30.00 ConUS, and $45.00 International to Canada & Australia. An alternative courier will be available as well for proper international transit (most likely UPS); pricing TBD for this. The alternative courier will be used for international commitments so assure fulfillment. A China/Singapore destination proxy will be available, but is part of a separate limited region group buy that will be inconjunction with this one; which I am not fulfilling, but Kingnestea will be handling.
The PCB & plate have been updated to reflect the supported layouts on the 1st post. I'm waiting for a new one to be made. This drop will be limited, but without knowing actual demand, we will have to see what I can handle. If I can't meet demand in R1, we will plan R2 shortly after we have finished all R1 fulfillment.
Here are the weight details:
1. M65 w/ Hyperfuse (Nylon Base w/ brass) = 3lbs 3 oz approximately.
2. Ramabae65 w/ HACK'D by GEEKS (Aluminum base w/ brass) = 4lbs 1.8oz approximately.
Here is the album of the samples I have in hand. Please refer to the manufacturer samples by the keyset that is on the board. Hyperfuse on the Manufacturer #2, who we are going to go forward with. Manufacturer #1 has HACK'D by GEEKS. Please also look at the color samples we got from manufacturer #2 in the blocks.
Also, we will have a Hydro Blue edition only available to those who purchased Hydro at any period in time.
Lastly, here is the full album, and a few photos from the album. - http://imgur.com/a/aXYCB
(http://i.imgur.com/nYWI0n7.jpg)
(http://i.imgur.com/lQQmEmc.jpg)
(http://i.imgur.com/p5c3uiZ.jpg)
(http://i.imgur.com/FyF4Epa.jpg)
Post by: rioc on Wed, 14 December 2016, 09:26:37
Post by: jal on Wed, 14 December 2016, 09:27:51
Hey everyone,
Thanks for all the love, support & patience. With the Holidays around the corner, I am confirming a January GB period. Estimated turnaround is approximately 12-15 weeks after the period ends. Total length is approximately 16-17 weeks not including transit time to you.Show Image(http://i.imgur.com/FyF4Epa.jpg)
I'm pretty sure I need one of those for each limb. Maybe a spare.
Post by: BAS1C on Wed, 14 December 2016, 09:30:32
Post by: ambalek on Wed, 14 December 2016, 09:40:16
Post by: luckyryan333 on Wed, 14 December 2016, 09:46:07
To buy one or more, that is the question.
Post by: Vigrith on Wed, 14 December 2016, 10:26:56
Lastly, here is the full album, and a few photos from the album. - http://imgur.com/a/aXYCB
(https://media.giphy.com/media/26AHszU183LU0wa6A/giphy.gif)
I wish I could afford 2, I wanted a rose gold initially but that jet black tho... HMMMMM.
The booty just too good, hnnnnng. Also wise choice, manufacturer #2 is definitely way better and worth the additional cost.
Post by: smittysteve on Wed, 14 December 2016, 11:37:46
Post by: GreyAmbience on Wed, 14 December 2016, 12:37:43
Post by: Fictiouz on Wed, 14 December 2016, 12:40:25
Post by: waqar on Wed, 14 December 2016, 12:44:00
Post by: xZ3ROx on Wed, 14 December 2016, 14:26:50
Sent from my iPhone using Tapatalk
Post by: ArdentHandsaw on Wed, 14 December 2016, 14:38:10
Post by: hervuli on Wed, 14 December 2016, 14:45:41
Post by: TSUT0 on Wed, 14 December 2016, 16:17:13
1) How tall is the Ramabae in front and in back? I’m more curious than anything.
2) From what I can tell, the included PCB has the LEDs at the bottom of the switch. Any plans (either in this run or R2) for a north-facing LED?
3) Is the included PCB programmable and/or include media keys?
4) What other PCBs, if any, does the Ramebae fit?
I’ve been planning on building a B.Face R, but if there was a way for me to get a programmable top-LED PCB in the ‘bae I’d throw money at you without a second thought.
Post by: dr-slump on Wed, 14 December 2016, 19:07:56
Can't decide whether to go for rose gold (for Miami Dolch) or Grey (for GMK Dolch)
Post by: Vigrith on Wed, 14 December 2016, 20:02:44
Can't decide whether to go for rose gold (for Miami Dolch) or Grey (for GMK Dolch)
Dood... I was almost set on buying the jet black because it'd match most news but now that you mention it, Rose Gold for DSA Miami Dolch would be so fkn cool. Damn.
Post by: aznreaper on Wed, 14 December 2016, 20:06:13
Post by: dr-slump on Wed, 14 December 2016, 20:30:58
Can't decide whether to go for rose gold (for Miami Dolch) or Grey (for GMK Dolch)
Dood... I was almost set on buying the jet black because it'd match most news but now that you mention it, Rose Gold for DSA Miami Dolch would be so fkn cool. Damn.
Then u hefta get both!
I'm considering getting both cases ( one as a spare) but the cost would be so high that I can just get 2 sets for a bit more #stillconsidering #got2PCs :cool:
Post by: jchan94 on Wed, 14 December 2016, 23:13:25
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Here it is:
(https://i.imgur.com/RuPbnOb.png)
Post by: oatmicro on Wed, 14 December 2016, 23:25:45
:confused: :confused: :confused: :confused: :confused: :confused: :confused: :confused: :confused: :confused: :confused: :confused:
Post by: terminallytrill on Wed, 14 December 2016, 23:31:15
Post by: xZ3ROx on Thu, 15 December 2016, 00:48:00
Ramabae with with MOD switches... yes. :eek:
Zealios here.
Sent from my iPhone using Tapatalk
Post by: yng on Thu, 15 December 2016, 00:52:43
Post by: jchan94 on Thu, 15 December 2016, 01:23:38
Ramabae with with MOD switches... yes. :eek:
Zealios here.
Sent from my iPhone using Tapatalk
Z E A L I O S 65G
Post by: xZ3ROx on Thu, 15 December 2016, 01:24:30
Ramabae with with MOD switches... yes. :eek:
Zealios here.
Sent from my iPhone using Tapatalk
Z E A L I O S 65G
Exactly what the order I placed today was for.
Sent from my iPhone using Tapatalk
Post by: kawasaki161 on Thu, 15 December 2016, 01:35:58
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Awww yes. Love it!
Would it also support 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1 ,1 , 1 or are there shared traces that would prevent that?
Post by: Auxo on Thu, 15 December 2016, 01:39:57
Post by: Brammm87 on Thu, 15 December 2016, 02:07:13
Post by: rioc on Thu, 15 December 2016, 03:39:09
cause already in this fully lit environment my face was all like:
(https://static.digitecgalaxus.ch/Files/6/9/6/8/3/8/6/rs_500x210-150522100554-tumblrmjpjqum8gc1qzh9h5o4500.gif?fit=inside%7C1440:h&output-format=gif)
Post by: SlashCamp on Thu, 15 December 2016, 06:22:15
Post by: rioc on Thu, 15 December 2016, 06:24:11
Post by: leoparder on Thu, 15 December 2016, 06:37:30
Amazing work !
Post by: Fictiouz on Thu, 15 December 2016, 07:09:09
Post by: gnmar2723 on Thu, 15 December 2016, 07:23:03
All credit for the case goes to Rama :). We're hyped to get this ball rolling.Does it have stepped caps support or not?
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Here it is:Show Image(https://i.imgur.com/RuPbnOb.png)
Post by: ReverbSlush on Thu, 15 December 2016, 07:35:36
Post by: jchan94 on Thu, 15 December 2016, 07:54:48
All credit for the case goes to Rama :). We're hyped to get this ball rolling.Does it have stepped caps support or not?
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Here it is:Show Image(https://i.imgur.com/RuPbnOb.png)
Sorry, yes it does ;). Updated in the first post.
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Awww yes. Love it!
Would it also support 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1 ,1 , 1 or are there shared traces that would prevent that?
Sorry, it doesn't support that :(
Post by: clappingcactus on Thu, 15 December 2016, 07:56:43
Post by: kawasaki161 on Thu, 15 December 2016, 08:09:36
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Awww yes. Love it!
Would it also support 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1 ,1 , 1 or are there shared traces that would prevent that?
Sorry, it doesn't support that :(
LITERALLY WORST KEYBOARD EVURRR /s :p :p :p
No biggie, I just saw the 3x1u with the 7u and 6.25u layout, so I thought you might have missed it/not thought about it.
Post by: Brammm87 on Thu, 15 December 2016, 08:31:18
Post by: Rafa_n on Thu, 15 December 2016, 09:19:44
Post by: dr-slump on Thu, 15 December 2016, 09:21:41
So, if i buy the case with a nylon base, will it be possible to add an aluminium base to the order? For an extra $20-$30 i wouldn't mind having both to try out the different feelios.
+1 on that
Post by: rioc on Thu, 15 December 2016, 09:24:30
So, if i buy the case with a nylon base, will it be possible to add an aluminium base to the order? For an extra $20-$30 i wouldn't mind having both to try out the different feelios.
seems like an idea :)
Post by: jchan94 on Thu, 15 December 2016, 09:32:43
So, if i buy the case with a nylon base, will it be possible to add an aluminium base to the order? For an extra $20-$30 i wouldn't mind having both to try out the different feelios.
An aluminum base would cost approximately $80.00 if that were the case. I'll review this option as we get closer to the launch period.
Also reviewing the extra plates/PCB options.
Also remember that shipping cost will increase as well since the aluminum base is a good chunk of weight.
Post by: Rafa_n on Thu, 15 December 2016, 09:36:06
So, if i buy the case with a nylon base, will it be possible to add an aluminium base to the order? For an extra $20-$30 i wouldn't mind having both to try out the different feelios.
An aluminum base would cost approximately $80.00 if that were the case. I'll review this option as we get closer to the launch period.
Also reviewing the extra plates/PCB options.
Also remember that shipping cost will increase as well since the aluminum base is a good chunk of weight.
Yup, I just looked at the difference between the two, I'm dumb :p
Post by: Dodgy on Thu, 15 December 2016, 14:49:03
Post by: Saiph on Thu, 15 December 2016, 14:51:12
Post by: aznreaper on Thu, 15 December 2016, 15:23:17
Post by: jchan94 on Thu, 15 December 2016, 18:58:46
Are you still including stabilizers in the overall cost for 250?
Yes, but I am thinking we may opt for those PCB Screw in Stabs from GMK... thoughts? It will be a few more bucks for the proper number that we need.
Post by: aznreaper on Thu, 15 December 2016, 19:03:08
Post by: CMYK on Thu, 15 December 2016, 20:09:42
Post by: xondat on Thu, 15 December 2016, 20:14:16
I am interested in the hydro blue, but have never owned a hyperfuse keycap set. Is there any way to order a hyperfuse set with the keyboard to get the hydro blue?You're getting a bit mixed up. You need to have bought the GMK Hydro (https://www.keyclack.com/product/gb-gmk-hydro/) set to get the Hydro Blue JC65. There is no relation to Hyperfuse.
Post by: CMYK on Thu, 15 December 2016, 20:24:42
Post by: nathanrosspowell on Thu, 15 December 2016, 21:58:00
All credit for the case goes to Rama :). We're hyped to get this ball rolling.
The first post has been updated to support 1 split layout. The split spacebar is: 1.25, 1.25, 1.25, 2.75, 1.25, 2.25, 1.5, 1.5.
Here it is:Show Image(https://i.imgur.com/RuPbnOb.png)
Aww yeeeee! The split space layout option I was hoping for :thumb:
I'm currently running with 2.25 - 1.25 - 2.75 on my CPSQ and I'm wishing I did it the other way around.
Rose gold, nylon base, split space layout and GMK 9009 are my plans. Can't wait to get a space in the GB :cool:
Post by: sony on Fri, 16 December 2016, 09:50:46
Post by: jal on Fri, 16 December 2016, 10:12:41
https://imgur.com/gallery/Mlt75 some photos from reddit. That blue and space gray.
Thanks for this. Ah, materialism; 'tis the season for lusting after objects.
Post by: doooostin on Fri, 16 December 2016, 13:15:07
I should be fine if I want the nylon base + pcb + shipping, coming out to 275 CONUS right?
Post by: Photoelectric on Fri, 16 December 2016, 14:37:32
Post by: jchan94 on Fri, 16 December 2016, 14:41:47
Do you think you'll be making another version of this in a TKL layout in the future, or something larger than 65%? I love the thick rounded case and the rose gold color but also generally prefer the look and use of larger keyboards.
Will definitely flirt the idea with RAMA when he has time to work on it I'd love to offer it in the future. TKL is probably the next best option for a style like this, but knowing Rama, he'd probably want to explore a new design, and not remake the same thing :).
Is the $80 sandwich case included in the price, or is that a separate option?
I should be fine if I want the nylon base + pcb + shipping, coming out to 275 CONUS right?
Separate option. And yes, that sounds right. We are stacking half of the PP fees ontop of the pricing so we both eat it. I won't be allowing gift payments to allow for buyer/seller protection n what not. Want everyone to feel comfortable in this GB.
Post by: poolside on Fri, 16 December 2016, 16:06:56
Post by: jchan94 on Fri, 16 December 2016, 16:16:26
Do the two board samples have the brass weight on them? If so, may we get a few more pictures of their undersides?
One has an alu weight, the other has a brass one. The alu one was made just to look at however.
We will have photos up for the bottoms once we have the custom rubber molded feet.
Post by: poolside on Fri, 16 December 2016, 16:22:53
Do the two board samples have the brass weight on them? If so, may we get a few more pictures of their undersides?
One has an alu weight, the other has a brass one. The alu one was made just to look at however.
We will have photos up for the bottoms once we have the custom rubber molded feet.
Great, thanks :thumb:
Post by: dubious on Fri, 16 December 2016, 17:17:07
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
Post by: jchan94 on Fri, 16 December 2016, 18:05:50
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
Post by: dubious on Fri, 16 December 2016, 18:32:41
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
Post by: Photoelectric on Fri, 16 December 2016, 21:12:24
Post by: duynguyenle on Fri, 16 December 2016, 21:35:21
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
That will never happen, the M67 boards were privately commissioned.
Post by: catweewee on Fri, 16 December 2016, 21:47:14
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
M67a will be a private gb, so it wont be available to the public
Post by: Moderate on Sat, 17 December 2016, 01:11:42
Holding out for M67-A :))
M67a will be a private gb, so it wont be available to the public
M67-A will have a gb? How will one get in on this private gb? ;)
Post by: jchan94 on Sun, 18 December 2016, 09:48:19
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
Post by: ambalek on Sun, 18 December 2016, 09:50:47
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. Yes (I like the nylon on the M4-A, but I also want to try aluminium and am too indecisive pass this up)
2. No
Post by: Vigrith on Sun, 18 December 2016, 10:09:27
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. Possibly, may be too expensive given I live overseas though.
2. Not personally.
Excited to see what the special goodie will be, can't wait for the GB to launch!
Post by: hervuli on Sun, 18 December 2016, 10:19:49
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. Yes!
2. Seems good to have the option but I wouldn't take advantage of it personally (I think).
Post by: sony on Sun, 18 December 2016, 10:20:42
Post by: jchan94 on Sun, 18 December 2016, 10:35:29
Jchan just take my money. Also tmk pcb when?
Working on the R2 for it ~
Edit: QMK cuz rgb boi.
Post by: ambalek on Sun, 18 December 2016, 10:37:25
Jchan just take my money. Also tmk pcb when?
Working on the R2 for it ~
Edit: QMK cuz rgb boi.
I think people were hoping there'd be a config utility like Rama got made for the M4, but I prefer editing keymaps in a text editor and flashing the old fashioned way.
Post by: jchan94 on Sun, 18 December 2016, 10:40:17
Jchan just take my money. Also tmk pcb when?
Working on the R2 for it ~
Edit: QMK cuz rgb boi.
I think people were hoping there'd be a config utility like Rama got made for the M4, but I prefer editing keymaps in a text editor and flashing the old fashioned way.
I messaged MACHINE INDUSTRIES about it and can change the PCB for R2 to be with the ATMEGA32U4, but additional variables are in play with the compatibility of the configurator. Unfortunately, R1 will definitely not see this compatibility.
Post by: kawasaki161 on Sun, 18 December 2016, 10:47:03
Jchan just take my money. Also tmk pcb when?
Working on the R2 for it ~
Edit: QMK cuz rgb boi.
Will you offer upgrade kits (PCB and maybe plate) for R1 boards with R2 then? I love the ps2avrgb software, but if this has the same inputlag as the VE.A I'd love to upgrade to a QMK PCB later down the road, so I don't have to switch boards for playing specific games. If this will not be available I would probably have to wait for R2 (which, if I think about it, actually would be great for my wallet).
Post by: jchan94 on Sun, 18 December 2016, 10:49:01
Jchan just take my money. Also tmk pcb when?
Working on the R2 for it ~
Edit: QMK cuz rgb boi.
Will you offer upgrade kits (PCB and maybe plate) for R1 boards with R2 then? I love the ps2avrgb software, but if this has the same inputlag as the VE.A I'd love to upgrade to a QMK PCB later down the road, so I don't have to switch boards for playing specific games. If this will not be available I would probably have to wait for R2 (which, if I think about it, actually would be great for my wallet).
Upgrade packs will be available for R1 supporters once we get it up and running ~. Definitely don't want to screw R1 supporters, but the road is far ahead, and R2 is just like "plans".
Of course, these plans are tentative, but I plan on delivering it and will work towards that ;)
Edit: Type-C anyone? pls. eh we shall see.
Edit: some words.
Post by: sony on Sun, 18 December 2016, 10:55:37
Post by: Vigrith on Sun, 18 December 2016, 10:55:55
Post by: kawasaki161 on Sun, 18 December 2016, 10:56:48
Will you offer upgrade kits (PCB and maybe plate) for R1 boards with R2 then? I love the ps2avrgb software, but if this has the same inputlag as the VE.A I'd love to upgrade to a QMK PCB later down the road, so I don't have to switch boards for playing specific games. If this will not be available I would probably have to wait for R2 (which, if I think about it, actually would be great for my wallet).
Upgrade packs will be available for R1 supporters once we get it up and running ~. Definitely don't want to screw R1 supporters. It's hard to tell since the road is far ahead :).
Of course, these plans are tentative and I plan on delivering it and will work towards that ;)
Edit: Type-C anyone? pls. eh we shall see.
Wohoo, great.
To the Type-C thing... if you throw in a cable I wouldn't care ;)
But seriously, getting Type-A to Type-C (or generally any Type-C) cables is still a lot harder than just going with mini or micro USB. I'd say unless you have to get around some limitations, staying with the old standard for another year or two, allowing Type-C to become more common, can't hurt.
Post by: sony on Sun, 18 December 2016, 10:59:18
Post by: GreyAmbience on Sun, 18 December 2016, 14:14:17
Post by: aznreaper on Sun, 18 December 2016, 14:18:14
Post by: GreyAmbience on Sun, 18 December 2016, 14:19:59
Just get them all! Tell yourself you'll sell the ones you don't like as much afterwards ;D
Ha I wish. I am actually not even sure I can even afford a single kit.
As a European I might be looking at something like $340 for a kit I think.
Post by: Brammm87 on Sun, 18 December 2016, 14:20:36
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. Personally no.
2. See above.
As far as Type C: why not, as long as it works with the new MBP. Definitely looking to get into R1 for the Hydro blue.
Post by: nathanrosspowell on Sun, 18 December 2016, 15:21:33
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
1. nope
2. nope
Edit: Type-C anyone? pls. eh we shall see.
nope
Just my opinions :thumb:
Post by: JDragon on Sun, 18 December 2016, 15:55:29
Post by: nmur on Sun, 18 December 2016, 17:08:20
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. yeah. unsure if I'd actually end up buying both bases, but I'd love to have the option since I can't decide on it right now..
2. nah
Post by: jal on Sun, 18 December 2016, 22:05:09
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
For me, Yes to (2), no to (1).
Post by: BAS1C on Mon, 19 December 2016, 10:56:35
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
1. No
2. No, if we can get extras in R2 with the upgrade.
Hype. I want to hear more about this special goodie and the R2 colour.
Post by: jchan94 on Mon, 19 December 2016, 10:58:08
The google doc has been made. We won't be offering additional PCB/Plates. But people are free to get the additional alu bottoms.
The GB launches on my birthday ;). I'll be 23! Woooo :eek: :p :thumb: :)) ;D :D ;)
Post by: aznreaper on Mon, 19 December 2016, 11:03:41
Post by: jchan94 on Mon, 19 December 2016, 11:05:02
For all those who don't know, when is your birthday?
I don't think anyone in the community knows ;). But it's in January... :D
Edit: Nvm. Only 1 person knows.
Post by: aznreaper on Mon, 19 December 2016, 11:13:11
Post by: dubious on Mon, 19 December 2016, 12:41:36
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
That will never happen, the M67 boards were privately commissioned.
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
M67a will be a private gb, so it wont be available to the public
Well ****.
Post by: Auxo on Mon, 19 December 2016, 18:56:45
fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
That will never happen, the M67 boards were privately commissioned.fffffff that's so sexy! :eek:
Except for those screws on the side....... was there really no where else to put them? It makes this $250 keyboard look like a b.face
I don't think the screws make it look any less than it is. The board has a bold aesthetic and takes many hints from retro, and industrial aesthetics :).
Going to have to disagree on this, but you know, to each his/her own.
I don't mean to take away from the board, it's friggin gorgeous. And you're right, it really is just my opinion and the only criticism I have of the design. You and Rama have really outdone yourselves! But one of the things that appeals to me about higher-end custom boards is a finished, or "seamless" look.
Holding out for M67-A :))
M67a will be a private gb, so it wont be available to the public
Well ****.
Yeah, I tried to get in on it several months ago and even then I was too late, hahaha
Post by: purrito on Mon, 19 December 2016, 21:58:27
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. No
2. No
Yes to type C and screw in stabs. You're doing great work, jchan. Excited for this to drop!
Post by: aznreaper on Mon, 19 December 2016, 22:07:58
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. No
2. Yes
I want the goodies please! What is it going to be?
Post by: jchan94 on Mon, 19 December 2016, 23:04:30
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1. No
2. Yes
I want the goodies please! What is it going to be?
Will release details when we have it! It'll only be available for those who participate but I'm sure many will want it ;).
Post by: aznreaper on Mon, 19 December 2016, 23:29:59
Post by: rioc on Tue, 20 December 2016, 01:16:51
Will release details when we have it! It'll only be available for those who participate but I'm sure many will want it ;).
How do you mean, only available for those who participate? (Is this just regarding the second base? Cause I definitely want in on the board, and maybe the second base too) ;P
Post by: duynguyenle on Tue, 20 December 2016, 03:55:04
Will release details when we have it! It'll only be available for those who participate but I'm sure many will want it ;).
How do you mean, only available for those who participate? (Is this just regarding the second base? Cause I definitely want in on the board, and maybe the second base too) ;P
What he means is probably its a paid-for extra, only for those who specifically requested it. As for what these things are, I'm also excited to find out!
Post by: Mavarina on Tue, 20 December 2016, 11:01:10
Post by: Valaris on Tue, 20 December 2016, 14:56:46
Post by: jchan94 on Tue, 20 December 2016, 14:58:05
So I plan on making this my first project and I'm curious, if I buy the one with the nylon base, what will I be missing? Switches, caps, and cable?
Correct.
Post by: Valaris on Tue, 20 December 2016, 15:01:58
Post by: FLOCKA on Tue, 20 December 2016, 20:56:52
I had been initially put off by the large bezels just because it's so different than the prevailing trend nowadays, but I've completely fallen under its spell. Now to decide between Space Grey and Matte Black!
Post by: zaerst on Tue, 20 December 2016, 22:08:54
Post by: nmur on Tue, 20 December 2016, 22:20:15
Post by: jchan94 on Wed, 21 December 2016, 01:20:10
are we able to get a alu base that's a different colour than the main housing?
Yes, that will be an option by default.
So here are the configurations
1) Top Color (5 color options + Hydro Blue if applicable)
2) Base Material (2 options)
3) Base Aluminum Color (5 color options + Hydro Blue if applicable)
There are a good chunk of options. All except the custom molded feet which will be forced on you.
Colors still being determined for the feet, but here's an idea:
Silver - Grey Feet
Matte Jet Black - Dark Grey Feet
Rose Gold - Pink Feet
Gold - Grey Feet
Space Grey - Dark Grey Feet
Hydro Blue - Grey Feet.
Post by: Mavarina on Wed, 21 December 2016, 01:22:38
Just worked on some M65-A logistics and working on the form.
Questions for those who want to join:
1. Do you want the option for an additional base piece? ($85.00 USD + shipping).
2. Do you want the option for additional plates + pcbs? ($70.00 for additional combo + shipping).
Also, I wanted to remind everyone that R2 is planned, but after R1 is fulfilled. Hydro blue is a R1 exclusive, and we will have a special color planned for R2 that will not be limited with any restriction. :). Hype!
Lastly, Rama and I are working on a special goodie that will be available in addition to the M65-A, but more TBA as we close in on the details.
1.Yes
2. Not really nah
Post by: Tally810 on Wed, 21 December 2016, 01:40:20
Post by: nmur on Wed, 21 December 2016, 01:44:01
awesome, thanksare we able to get a alu base that's a different colour than the main housing?
Yes, that will be an option by default.
So here are the configurations
1) Top Color (5 color options + Hydro Blue if applicable)
2) Base Material (2 options)
3) Base Aluminum Color (5 color options + Hydro Blue if applicable)
There are a good chunk of options. All except the custom molded feet which will be forced on you.
Colors still being determined for the feet, but here's an idea:
Silver - Grey Feet
Matte Jet Black - Dark Grey Feet
Rose Gold - Pink Feet
Gold - Grey Feet
Space Grey - Dark Grey Feet
Hydro Blue - Grey Feet.
I am curious about the feet now, looks like they won't be going under the same anodisation as the main housing?
Post by: jchan94 on Wed, 21 December 2016, 01:47:31
awesome, thanksare we able to get a alu base that's a different colour than the main housing?
Yes, that will be an option by default.
So here are the configurations
1) Top Color (5 color options + Hydro Blue if applicable)
2) Base Material (2 options)
3) Base Aluminum Color (5 color options + Hydro Blue if applicable)
There are a good chunk of options. All except the custom molded feet which will be forced on you.
Colors still being determined for the feet, but here's an idea:
Silver - Grey Feet
Matte Jet Black - Dark Grey Feet
Rose Gold - Pink Feet
Gold - Grey Feet
Space Grey - Dark Grey Feet
Hydro Blue - Grey Feet.
I am curious about the feet now, looks like they won't be going under the same anodisation as the main housing?
They are custom molded rubber feet.
They are being shipped to us today, and we should have them early next week & then we'll throw up a photo of it.
But to properly answer your question: No, they aren't anodized.
Also, here are the pantones we're using for the feet:
Cool Gray 2C <-- Grey
Cool Gray 10C <-- Dark Grey
Pink TBD.
Render preview of feet
(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfb0759cc689a7b44f26f/1477311242181/RAMA-161024-COMPRESSED-RAMA-M65-003.503.jpg?format=1500w)
Post by: nmur on Wed, 21 December 2016, 02:24:36
oooh rubber! I was thinking gon style feet, guess I didn't pay attention to the rendersawesome, thanksare we able to get a alu base that's a different colour than the main housing?
Yes, that will be an option by default.
So here are the configurations
1) Top Color (5 color options + Hydro Blue if applicable)
2) Base Material (2 options)
3) Base Aluminum Color (5 color options + Hydro Blue if applicable)
There are a good chunk of options. All except the custom molded feet which will be forced on you.
Colors still being determined for the feet, but here's an idea:
Silver - Grey Feet
Matte Jet Black - Dark Grey Feet
Rose Gold - Pink Feet
Gold - Grey Feet
Space Grey - Dark Grey Feet
Hydro Blue - Grey Feet.
I am curious about the feet now, looks like they won't be going under the same anodisation as the main housing?
They are custom molded rubber feet.
They are being shipped to us today, and we should have them early next week & then we'll throw up a photo of it.
But to properly answer your question: No, they aren't anodized.
Also, here are the pantones we're using for the feet:
Cool Gray 2C <-- Grey
Cool Gray 10C <-- Dark Grey
Pink TBD.
Render preview of feetShow Image(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfb0759cc689a7b44f26f/1477311242181/RAMA-161024-COMPRESSED-RAMA-M65-003.503.jpg?format=1500w)
Post by: codedisorg on Wed, 21 December 2016, 09:48:52
Post by: rioc on Wed, 21 December 2016, 09:53:03
What colors are the screws going to be? Same color as the top color?
good Q... would love some orange anodized screws in my space gray case ;)
Post by: kawasaki161 on Wed, 21 December 2016, 09:59:59
Render preview of feetShow Image(https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/580dfb0759cc689a7b44f26f/1477311242181/RAMA-161024-COMPRESSED-RAMA-M65-003.503.jpg?format=1500w)
Whoah, that looks great.
Render preview of feet
Wait, wait, wait. WHAT?
Render
RIP GPU.. probably burned to death
Post by: Valaris on Wed, 21 December 2016, 11:58:11
Post by: xondat on Wed, 21 December 2016, 12:18:00
How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Post by: Valaris on Wed, 21 December 2016, 12:27:39
How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.
Post by: xondat on Wed, 21 December 2016, 12:35:46
Backlit switches like the Zeal60?How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.
(http://i.imgur.com/oQYptq4.jpg)
I didn't know this PCB had any..
Post by: Valaris on Wed, 21 December 2016, 14:35:27
Backlit switches like the Zeal60?How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.Show Image(http://i.imgur.com/oQYptq4.jpg)
I didn't know this PCB had any..
That's what I thought originally. I'll need to solder on the top ones. Makes sense.
Post by: xondat on Wed, 21 December 2016, 15:59:44
I don't think there are even pads for those LEDs - you'll have to get jchans word on that.Backlit switches like the Zeal60?How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.Show Image(http://i.imgur.com/oQYptq4.jpg)
I didn't know this PCB had any..
That's what I thought originally. I'll need to solder on the top ones. Makes sense.
Post by: Valaris on Wed, 21 December 2016, 18:05:43
I don't think there are even pads for those LEDs - you'll have to get jchans word on that.Backlit switches like the Zeal60?How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.Show Image(http://i.imgur.com/oQYptq4.jpg)
I didn't know this PCB had any..
That's what I thought originally. I'll need to solder on the top ones. Makes sense.
Oh ok. Not that not led's on top is a big loss considering the lighting in that base.
Post by: hervuli on Wed, 21 December 2016, 18:39:37
I don't think there are even pads for those LEDs - you'll have to get jchans word on that.Backlit switches like the Zeal60?How does the lighting work for the nylon base? Do we have to solder some led's on the bottom of the pcb or what? sorry for the possibly stupid question.Everything is presoldered.
Cool thanks! Do you happen to know if that includes the led's on top for the keycaps? I know the switches won't be soldered on.Show Image(http://i.imgur.com/oQYptq4.jpg)
I didn't know this PCB had any..
That's what I thought originally. I'll need to solder on the top ones. Makes sense.
Oh ok. Not that not led's on top is a big loss considering the lighting in that base.
Are you just talking about regular in-switch LEDs? In that case yes they are supported and yes you'd have to solder them yourself (since they're physically impossible to presolder if the switches are not already in place).
Post by: Dominathan on Wed, 21 December 2016, 18:46:53
Are you just talking about regular in-switch LEDs? In that case yes they are supported and yes you'd have to solder them yourself (since they're physically impossible to presolder if the switches are not already in place).
Unless we're talking backlit ones, like Zeal's
Post by: fancymans on Wed, 21 December 2016, 19:24:53
Are you just talking about regular in-switch LEDs? In that case yes they are supported and yes you'd have to solder them yourself (since they're physically impossible to presolder if the switches are not already in place).
Unless we're talking backlit ones, like Zeal's
Surface mounted LEDs?
Post by: hervuli on Wed, 21 December 2016, 19:39:56
Are you just talking about regular in-switch LEDs? In that case yes they are supported and yes you'd have to solder them yourself (since they're physically impossible to presolder if the switches are not already in place).
Unless we're talking backlit ones, like Zeal's
Right, which xondat just spent several posts saying are not supported on this PCB (I think that was clarified a while back either here or on reddit)
Post by: jchan94 on Thu, 22 December 2016, 03:24:03
This PCB is a custom ps2avrgb-based PCB using WKL's firmware + their proprietary RGB firmware.
The PCB is LED-backlight supported (regular single LED backlighting).
Zeal's uses his own fork of QMK to achieve individual per key RGB lighting.
Screws:
1. Stainless Steel Screws for Silver,Champagne, and Rose Gold Top Models
2. Black Screws for Matte Jet Black, Hydro Blue, and Space Grey.
Edit
If you're about "preference" for the screws, we will have the model numbers up for them, and you can purchase your own :). They're super cheap in the USA. I bought 100 for about $10.00 USD shipped UPS. Unfortunately, I won't be offering this custom option as SKUs -> Problems.
Post by: Valaris on Thu, 22 December 2016, 06:45:41
Post by: jchan94 on Thu, 22 December 2016, 12:01:01
Thanks for supporting Hydro and I'm pumped to get the set onto the M65-A <3.
Post by: Vigrith on Thu, 22 December 2016, 12:17:49
With the news of Hydro coming, please remember that anyone who has gotten a set, from spacebar -> base set at any period, is eligible for Hydro Blue.
Thanks for supporting Hydro and I'm pumped to get the set onto the M65-A <3.
Congratulations on Hydro becoming a reality so soon! Here's hoping the M65 and XDA ship out around the same time, I think flat profile caps look so good one these kinda boards.
Post by: pon10 on Fri, 23 December 2016, 02:42:10
Post by: jchan94 on Fri, 23 December 2016, 07:15:12
I am reading this tread correctly that ISO possibility have been added?? :eek: You are the man, Chan! Have a great Christmas everybody!
Correct! ;). Of course, with this "universal plate", the switch alignment is always a challenge since it is a little more loose, but I believe it's at a benefit at the end of the day.
A new PCB is going to me soon, and we're just about to finish up the plate to get another one done. I might just test it myself with acrylic since I have a laser cutter at my office.
Post by: pon10 on Fri, 23 December 2016, 13:05:04
Thanks for your reply :) Looking forward! 1 question, is the RGB light gonna be static?I am reading this tread correctly that ISO possibility have been added?? :eek: You are the man, Chan! Have a great Christmas everybody!
Correct! ;). Of course, with this "universal plate", the switch alignment is always a challenge since it is a little more loose, but I believe it's at a benefit at the end of the day.
A new PCB is going to me soon, and we're just about to finish up the plate to get another one done. I might just test it myself with acrylic since I have a laser cutter at my office.
Post by: sony on Fri, 23 December 2016, 13:49:26
It's ps2avr so it has all the effects of wkl keyboards.Thanks for your reply :) Looking forward! 1 question, is the RGB light gonna be static?I am reading this tread correctly that ISO possibility have been added?? :eek: You are the man, Chan! Have a great Christmas everybody!
Correct! ;). Of course, with this "universal plate", the switch alignment is always a challenge since it is a little more loose, but I believe it's at a benefit at the end of the day.
A new PCB is going to me soon, and we're just about to finish up the plate to get another one done. I might just test it myself with acrylic since I have a laser cutter at my office.
Post by: pon10 on Fri, 23 December 2016, 14:04:56
It's ps2avr so it has all the effects of wkl keyboards.Thanks for your reply :) Looking forward! 1 question, is the RGB light gonna be static?I am reading this tread correctly that ISO possibility have been added?? :eek: You are the man, Chan! Have a great Christmas everybody!
Correct! ;). Of course, with this "universal plate", the switch alignment is always a challenge since it is a little more loose, but I believe it's at a benefit at the end of the day.
A new PCB is going to me soon, and we're just about to finish up the plate to get another one done. I might just test it myself with acrylic since I have a laser cutter at my office.
Cool, thanks :) i am not on the firmware level yet. searched an it looks super, have a good holiday! :)
Post by: jonthn on Sun, 25 December 2016, 16:46:42
Do you think it will be possible to make the board/PCB hotswappable-switch friendly ?
I hope not to be completely off-topic, don't hesitate to correct/explain/point-out what's required to make a keyboard with hotswappable switches.
Post by: kolashnikov on Sun, 25 December 2016, 17:49:04
Like with the Team Wolf board, for example, there is nothing particularly special about the switches. Although they require switches that accommodate SMD LEDs, they aren't specifically "hot swap" switches.
Post by: aznreaper on Sun, 25 December 2016, 17:58:20
Some people have been trying to get a spreadsheet to show which PCB's work with these things, but this should be a new custom PCB that jchan is sourcing so you would need jchan to try to know for sure.
Post by: Tre3Cycl3S on Mon, 26 December 2016, 00:02:25
It is too bad I couldn't get the Hydro Blue colour since I didn't manage to hop on to GMK Hydro. Maybe I'll get Matte Jet Black to match the colour of all but one of my board.... :P
Post by: jonthn on Mon, 26 December 2016, 04:37:38
Yeah, you can always buy the hotlite pieces to stick into the PCB to act like sockets and cover your board to be hot swappable. However you need to make sure the size fits almost perfectly since if the tolerance in the holes is too high, the hot lite piece could just fall through and it would be tricky to solder, and kinda defeat the purpose of you choosing to go hot swappable.
Some people have been trying to get a spreadsheet to show which PCB's work with these things, but this should be a new custom PCB that jchan is sourcing so you would need jchan to try to know for sure.
My understanding is that hot-swappable keyboards have hot-swappable PCBs, not hot-swappable switches. That is, the keyboard would have to be designed for it and any standard mechanical switches would work (MX, Gateron, and related clones). It is likely too late (and IMO, out of scope) for this board to have hot swap switch capability.
Like with the Team Wolf board, for example, there is nothing particularly special about the switches. Although they require switches that accommodate SMD LEDs, they aren't specifically "hot swap" switches.
Ok. Thanks for the explanations. So it may be possible at some point to change the PCB to accomodate for these Holtite sockets.
I hope it works with the first version, I guess I will try and participate with this GB when it's live, in the worst case it will still be a beautiful working keyboard ;)
Post by: sony on Mon, 26 December 2016, 12:25:20
Very interested with this! I really like the aesthetics of it. I was planning to get a WhiteFox to satisfy my 65% cravings but this design though... Seriously considering getting one!You can still get Hydro pre-order. $180 though.
It is too bad I couldn't get the Hydro Blue colour since I didn't manage to hop on to GMK Hydro. Maybe I'll get Matte Jet Black to match the colour of all but one of my board....
Post by: alienman82 on Mon, 26 December 2016, 14:43:09
Post by: kawasaki161 on Mon, 26 December 2016, 15:01:35
had to screw me over, so I can't get blue since I didn't get hydro since Dolch mods belong with Dolch alphas not beige alphas.
smh.
What about your "boycott china" thing? That should rule out this board anyways for you, shouldn't it?
Post by: alienman82 on Mon, 26 December 2016, 15:06:09
Post by: marian on Mon, 26 December 2016, 15:08:20
Post by: jchan94 on Mon, 26 December 2016, 15:36:01
A question about the color Jet Black: does it have a metallic effect, it's not just black right?. I can't tell just by the sample pic. Will it look more like the renders?
It's Matte, so it's not like shiny like metal; hence "Matte Jet Black".
Post by: FLOCKA on Mon, 26 December 2016, 15:39:44
(http://i.imgur.com/z9PJ1g6.png)
I would need:
- 1.75u Shift
- 1.5u Control
- 1.5u Alt
Have I got that right?
Post by: jchan94 on Mon, 26 December 2016, 15:42:26
Quick question. Can anybody confirm that I've got these key sizes right?Show Image(http://i.imgur.com/z9PJ1g6.png)
I would need:
- 1.75u Shift
- 1.5u Control
- 1.5u Alt
Have I got that right?
Correct.
Post by: FLOCKA on Mon, 26 December 2016, 15:54:11
Post by: jchan94 on Mon, 26 December 2016, 15:58:42
Thank you kindly! Now to hunt down a set of keys that will fit this bad boy. It seems like GMK Carbon's "base kit" includes enough keys to provide full coverage, so I'm thinking that might be a good choice.
Yupp! Carbon should fit it fine. Good luck hunting!
edit
News!
This will launch in January sometime (might be early, might be late).
The google form will be open for: 5 days only. You will be invoiced at the end of the form period.
The rubber feet are looking to land soon and we'll have photos up then of the full bottom.
Post by: kawasaki161 on Mon, 26 December 2016, 17:23:05
had to screw me over, so I can't get blue since I didn't get hydro since Dolch mods belong with Dolch alphas not beige alphas.
smh.
What about your "boycott china" thing? That should rule out this board anyways for you, shouldn't it?
well Stefan, while I have stated in the mira thread more or less three times that that was a joke, I can also say that I buy whatever I want.
Oh, sorry, I forgot that friendly banter isn't a thing on the internet. Don't take everything I casually say personal, you'll realize when I'm really serious :-* everything else either has a neutral or sarcastic meaning :))
Post by: kitchenace13 on Tue, 27 December 2016, 10:22:37
Post by: Potatoes on Wed, 28 December 2016, 07:55:19
Post by: Photoelectric on Wed, 28 December 2016, 09:50:41
Can't decide between nylon base and aluminum base. I'd prefer the aluminum base, but the option of having bottom lighting is nice, and it's exclusive to the nylon base.
Post by: duynguyenle on Wed, 28 December 2016, 09:53:48
Sorry if it's been answered already, but are the side bolts going to be only available in silver color? Or some options there?
Can't decide between nylon base and aluminum base. I'd prefer the aluminum base, but the option of having bottom lighting is nice, and it's exclusive to the nylon base.
https://geekhack.org/index.php?topic=85629.msg2324988#msg2324988
Post by: jchan94 on Wed, 28 December 2016, 15:36:52
Sorry if it's been answered already, but are the side bolts going to be only available in silver color? Or some options there?
Can't decide between nylon base and aluminum base. I'd prefer the aluminum base, but the option of having bottom lighting is nice, and it's exclusive to the nylon base.
https://geekhack.org/index.php?topic=85629.msg2324988#msg2324988
The custom molded feet have landed! They fit perfectly. They lock into the base piece very easily with hole inserts on the base, and have 3M tape on them so they don't come off. More photos to come soon!
Post by: Photoelectric on Wed, 28 December 2016, 18:07:50
Sorry if it's been answered already, but are the side bolts going to be only available in silver color? Or some options there?
Can't decide between nylon base and aluminum base. I'd prefer the aluminum base, but the option of having bottom lighting is nice, and it's exclusive to the nylon base.
https://geekhack.org/index.php?topic=85629.msg2324988#msg2324988
Cool thanks. Completely overlooked that post somehow :(
Post by: jchan94 on Wed, 28 December 2016, 23:34:30
(http://i.imgur.com/Rt76oHx.jpg)
(http://i.imgur.com/wtjPhc2.jpg)
(http://i.imgur.com/gz6y9yx.jpg)
Post by: FLOCKA on Wed, 28 December 2016, 23:37:22
So were the feet basically the last hurdle to clear for the gb?
Post by: jchan94 on Wed, 28 December 2016, 23:46:49
Love it! I may have missed this earlier, but I had no idea the nylon bottom had a weight included :D
So were the feet basically the last hurdle to clear for the gb?
The feet were the last parts to receive. The PCBs are currently manufacturing already.
I guess you can say that everything is here and ready, but we have a few things left to do:
1. Packaging
2. Designing the extra goodie we have
3. Updating the plate (one measurement was off for split spacebar by 0.2mm).
4. Designing the brass
Almost there! :)
Post by: FLOCKA on Wed, 28 December 2016, 23:49:28
Post by: jchan94 on Wed, 28 December 2016, 23:50:18
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
Post by: exitfire401 on Wed, 28 December 2016, 23:59:28
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
So, I love that there's a Hydro special color, any chance of a terminal special color since it looks like this will be dropping around the same time? (And green is bae)
Post by: jchan94 on Thu, 29 December 2016, 00:02:58
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
So, I love that there's a Hydro special color, any chance of a terminal special color since it looks like this will be dropping around the same time? (And green is bae)
That sounds like a fantastic idea.
I think this is what I'll do most likely since we're closing in on everything. I wouldn't want to add a color if I didn't have a sample chip on hand. The manufacturers would take 1-2 weeks to get that to us and a crazy price to get it expedited.
In any case, this is my plan:
R1 will offer the current colors.
R2 will offer the most popular colors from R1, and I think we can add green + a special r2 color as well. I was also thinking about adding maroon. It'd be great to see that. I thought about add red (GMK Pyro), but I think it might be way too tacky looking, despite having Hydro Blue.
Post by: exitfire401 on Thu, 29 December 2016, 00:04:37
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
So, I love that there's a Hydro special color, any chance of a terminal special color since it looks like this will be dropping around the same time? (And green is bae)
That sounds like a fantastic idea.
I think this is what I'll do most likely since we're closing in on everything. I wouldn't want to add a color if I didn't have a sample chip on hand. The manufacturers would take 1-2 weeks to get that to us and a crazy price to get it expedited.
In any case, this is my plan:
R1 will offer the current colors.
R2 will offer the 2 most popular colors from R1, and I think we can add green + a special r2 color as well. I was also thinking about adding maroon. It'd be great to see that. I thought about add red (GMK Pyro), but I think it might be way too tacky looking, despite having Hydro Blue.
Awesome. As much as I want one, I'll have to wait for rd 2 as I'm broke as hell after the holidays and since you're about to destroy my wallet with Terminal anyways.
Post by: jchan94 on Thu, 29 December 2016, 00:06:34
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
So, I love that there's a Hydro special color, any chance of a terminal special color since it looks like this will be dropping around the same time? (And green is bae)
That sounds like a fantastic idea.
I think this is what I'll do most likely since we're closing in on everything. I wouldn't want to add a color if I didn't have a sample chip on hand. The manufacturers would take 1-2 weeks to get that to us and a crazy price to get it expedited.
In any case, this is my plan:
R1 will offer the current colors.
R2 will offer the 2 most popular colors from R1, and I think we can add green + a special r2 color as well. I was also thinking about adding maroon. It'd be great to see that. I thought about add red (GMK Pyro), but I think it might be way too tacky looking, despite having Hydro Blue.
Awesome. As much as I want one, I'll have to wait for rd 2 as I'm broke as hell after the holidays and since you're about to destroy my wallet with Terminal anyways.
Hahah, Terminal is by thekeycompany :). It's a great piece and I'm on the fence to get it. So many keysets, not enough keyboards :(
Post by: exitfire401 on Thu, 29 December 2016, 00:12:58
That's very exciting news! Also, I don't know how you do it man! I keep seeing your name attached to so many different projects, it's really impressive. Your hard work is greatly appreciated!
Well it's not without people's help :).
RAMA is a huge part of this project and it wouldn't be here without him <3.
So, I love that there's a Hydro special color, any chance of a terminal special color since it looks like this will be dropping around the same time? (And green is bae)
That sounds like a fantastic idea.
I think this is what I'll do most likely since we're closing in on everything. I wouldn't want to add a color if I didn't have a sample chip on hand. The manufacturers would take 1-2 weeks to get that to us and a crazy price to get it expedited.
In any case, this is my plan:
R1 will offer the current colors.
R2 will offer the 2 most popular colors from R1, and I think we can add green + a special r2 color as well. I was also thinking about adding maroon. It'd be great to see that. I thought about add red (GMK Pyro), but I think it might be way too tacky looking, despite having Hydro Blue.
Awesome. As much as I want one, I'll have to wait for rd 2 as I'm broke as hell after the holidays and since you're about to destroy my wallet with Terminal anyways.
Hahah, Terminal is by thekeycompany :). It's a great piece and I'm on the fence to get it. So many keysets, not enough keyboards :(
Whoops! Thought that was you. My bad!
Post by: forevermadrigal on Thu, 29 December 2016, 00:33:01
Post by: jchan94 on Thu, 29 December 2016, 00:34:26
Jchan pls, do I join R1 or wait to see what the extra colors in R2 will be :thinking: :-[
EH. R2.5 for "A LA CARTE" service ? :O
But who knows when that will happen. Seems long down the road and I can't see that far. I can just plan what I'm going to offer then :).
edit
In other news, I'm applying for a UPS business account and hopefully they give me good pricing for international deliveries. I definitely do not want problems. I know shipping is expensive to deal with, so I'm sorry for those who choose to participate internationally :(.
Post by: Slash Emperor on Thu, 29 December 2016, 00:56:50
Jchan pls, do I join R1 or wait to see what the extra colors in R2 will be :thinking: :-[
EH. R2.5 for "A LA CARTE" service ? :O
But who knows when that will happen. Seems long down the road and I can't see that far. I can just plan what I'm going to offer then :).
edit
In other news, I'm applying for a UPS business account and hopefully they give me good pricing for international deliveries. I definitely do not want problems. I know shipping is expensive to deal with, so I'm sorry for those who choose to participate internationally :(.
Hopefully you can get a real nice discount with a UPS business account. My company has one and the discount is around 78%, which is quite nice.
Post by: jchan94 on Thu, 29 December 2016, 00:58:51
Jchan pls, do I join R1 or wait to see what the extra colors in R2 will be :thinking: :-[
EH. R2.5 for "A LA CARTE" service ? :O
But who knows when that will happen. Seems long down the road and I can't see that far. I can just plan what I'm going to offer then :).
edit
In other news, I'm applying for a UPS business account and hopefully they give me good pricing for international deliveries. I definitely do not want problems. I know shipping is expensive to deal with, so I'm sorry for those who choose to participate internationally :(.
Hopefully you can get a real nice discount with a UPS business account. My company has one and the discount is around 78%, which is quite nice.
oh jesus. I hope it is that good. Not sure how far it'll go since I believe it would depend on ongoing / reoccuring volume.
Post by: Slash Emperor on Thu, 29 December 2016, 01:45:25
Hopefully you can get a real nice discount with a UPS business account. My company has one and the discount is around 78%, which is quite nice.
oh jesus. I hope it is that good. Not sure how far it'll go since I believe it would depend on ongoing / reoccuring volume.
Here's hoping that you can get hooked up with a nice discount. I think my work has such a steep discount because of the sheer daily volume of international and domestic UPS shipments (UPS truck and freight truck come by every day).
Post by: Photoelectric on Thu, 29 December 2016, 20:18:00
Post by: FLOCKA on Thu, 29 December 2016, 20:32:52
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
Post by: jchan94 on Thu, 29 December 2016, 21:15:41
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
Post by: FLOCKA on Thu, 29 December 2016, 21:20:15
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
Hey jchan, could you please check the sharing permissions on that? It is currently unavailable for me
Post by: jchan94 on Thu, 29 December 2016, 21:24:56
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
Hey jchan, could you please check the sharing permissions on that? It is currently unavailable for me
Fixed. Sorry. Google Orgs Emails /shrug
Post by: sony on Thu, 29 December 2016, 21:30:09
Can I buy a keyclack email?What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
Hey jchan, could you please check the sharing permissions on that? It is currently unavailable for me
Fixed. Sorry. Google Orgs Emails /shrug
Post by: nathanrosspowell on Thu, 29 December 2016, 23:42:38
What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?What's been decided about plate colors? They will match the top case color? Will there be an option to mix and match top and bottom colors, or one solid color for everything?
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
"Stainless Steal"? Confirmed topskam!
Post by: Photoelectric on Thu, 29 December 2016, 23:49:15
I thought the case and plate were integrated as a single piece... At least that's how it looks from the renders. Just slide the PCB underneath, then the nylon (or aluminum) bottom. But I could be wrong!
They are separate, it's been pointed out somewhere early in this thread.
My original vision was to have identical plate colors to the top to lower issues, but slowly as more and more people email / pm me about this, I might push for Stainless Steel plates.
Fill out the form for the plate feedback. If there's interest for each one, I think we can make it work if they even out.
https://goo.gl/forms/hk7jaF13hyeFNNun2 (https://goo.gl/forms/hk7jaF13hyeFNNun2)
Thanks for that! I wrote that I'm interested in the brass plate, and if brass will not be available, then matching the plate color to top color is good. I hate stainless steel plates (when combined with rigid metal cases) with passion after my Lightsaver.
Post by: jchan94 on Fri, 30 December 2016, 00:59:57
@photo Looks like people just want Alu, then Brass.
Waiting for confirmations on pricing and such,
Post by: forevermadrigal on Fri, 30 December 2016, 03:55:14
Stainless steel plate would make this fb godlikeJchan pls, do I join R1 or wait to see what the extra colors in R2 will be :thinking: :-[
EH. R2.5 for "A LA CARTE" service ? :O
But who knows when that will happen. Seems long down the road and I can't see that far. I can just plan what I'm going to offer then :).
edit
In other news, I'm applying for a UPS business account and hopefully they give me good pricing for international deliveries. I definitely do not want problems. I know shipping is expensive to deal with, so I'm sorry for those who choose to participate internationally :(.
Hopefully you can get a real nice discount with a UPS business account. My company has one and the discount is around 78%, which is quite nice.
Post by: Auxo on Fri, 30 December 2016, 04:29:06
Post by: BAS1C on Fri, 30 December 2016, 11:12:55
Hopefully you can get a real nice discount with a UPS business account. My company has one and the discount is around 78%, which is quite nice.
oh jesus. I hope it is that good. Not sure how far it'll go since I believe it would depend on ongoing / reoccuring volume.
My one fear of UPS is brokerage fees when crossing the border.. Everytime I get something worth more than say, $150 bucks from the US and it ships UPS, I get dinged sometimes up to 75% of the value of the item in fees. Hopefully you have a good international option, cause i'm not about to pay $200 in fees for a keyboard, and I don't think I'd be the only one. What's your plan for international Jchan?
Post by: Vigrith on Fri, 30 December 2016, 11:31:50
My one fear of UPS is brokerage fees when crossing the border.. Everytime I get something worth more than say, $150 bucks from the US and it ships UPS, I get dinged sometimes up to 75% of the value of the item in fees. Hopefully you have a good international option, cause i'm not about to pay $200 in fees for a keyboard, and I don't think I'd be the only one. What's your plan for international Jchan?
Yea international shipping is bad enough as is, let alone if you need to pay an exorbitant amount in VAT and fees - I just paid an extra $70 two days ago for my HD6XX headphones off of Massdrop (skinned HD650s pretty much) when their price was $200. Obviously I knew this would happen because they don't declare lower value for their items but still point being, fees are crazy if not handled properly. Not keen on declaring $50 value for a keyboard either in case it messes up insurance etc. but with a competent courier such as UPS you should never have to worry about the parcel being lost or getting stuck, thus declaring lower values is still very safe.
Here's hoping Joseph can come up with a nice deal with UPS!
Post by: Brammm87 on Fri, 30 December 2016, 11:45:50
Post by: sony on Fri, 30 December 2016, 11:47:56
Will everyone who enters in those 5 days be able to join R1?I believe Jchan said it was limited to 200 or so units.
Post by: Gamecat on Fri, 30 December 2016, 15:49:47
https://massdrop-s3.imgix.net/product-images/rama-minipad/MD-26784_20161123152602_accb6917c7af95bd.jpg?auto=format&fm=jpg&fit=crop&w=335&dpr=1 (https://massdrop-s3.imgix.net/product-images/rama-minipad/MD-26784_20161123152602_accb6917c7af95bd.jpg?auto=format&fm=jpg&fit=crop&w=335&dpr=1)
Post by: jchan94 on Fri, 30 December 2016, 19:07:37
1) The Brass "Plate" is actually -> the Switch Plate.
I got some recommendations and such for this brass plate. Because the plate is really thin, it is prone to scratches, but will add a good chunk of weight to it. We'll see if we have this option as more fill out the plate options.
The Brass weight is completely different, and is included by default.
2) The form is open for 5 days allowing people to enter, but I think maybe 3 days might be better. CNY is coming up, and I want to confirm our order for fulfillment before all of the hassle during that manufacturer down time. The manufacturer we're working with are very professional and don't really delay/hiccup without a good reason. For reference, they thought the quality of the nylon was bad when they made it, so they remade it 4 times until they got the process down.
3) There will be a limit on R1. R2 will allow those who didn't enter to come in the buy. New colors will be available in this as well.
Recommendations for new colors are welcomed:).
4) The "Grey" from the MD x RAMA M10A drop should be similar. The colors are "reference colors" (i.e. Space Grey, Rose Gold, Silver, etc), so the anodization is supposed to be close, but these are made by different manufacturers and the anodization will slightly vary.
For reference, you can see the anodization differences on the M65-A from the two manufacturers when I told them both "Space Grey". Lastly, please remember that anodization varies from batch to batch. But I'm, very confident in the manufacturer we've chosen to move forward with.
Any other questions? :)
Post by: kolashnikov on Fri, 30 December 2016, 19:31:01
Post by: Photoelectric on Fri, 30 December 2016, 20:42:11
Post by: renzpwns on Fri, 30 December 2016, 21:32:28
I hadn't realized brass is heavier than stainless steel (just looked it up, it's slightly denser than steel, and aluminum alloys are much much lighter), I think I'd prefer aluminum for switch plate after all. Is brass as rigid as steel or a bit more springy? The finger-bruising rigidity is what I disliked about a sturdy metal case combined with a thick steel plate (Lightsaver), though with cushiony switches like stock MX Clears, it was reasonable.From what I read, Brass plates go in-between aluminum and SS plates when it comes to that rigid, bottom out feel. Maybe I can confirm it soon once I build my TX-75 that came with both a brass and SS plate.
Post by: bbmathlvr on Sat, 31 December 2016, 10:12:14
Post by: Jedi on Sat, 31 December 2016, 11:19:16
Post by: jchan94 on Mon, 02 January 2017, 01:53:57
Anyways, looks like someone was really adamant about getting a SS plate, and submitted for form 40 times with 4 seconds apart each submission :P.
In any case, we will be offering unpolished brass and alu6061 matching your top piece.
I asked about polishing the brass switch plate with a mirror finish, but its too thin and would cause deformation. The Brass Plate will cost an extra $35.00 + shipping. It should add a good chunk of weight to your overall build and extra rigidity to your switches since ALU6061 plates can bend a little depending on their density from the manufacturers.
Still figuring out the whole shipping ordeal and didn't get a chance to talk to DHL because of the New Years, but I will talk to them this week. I was also referred to "SF EXPRESS" -> http://www.sf-express.com/cn/en/dynamic_functions/waybill/# and their pricing seems good, and they are an independent shipper separate from Fedex, DHL, UPS, etc. I may use them as shipping 5lbs to anywhere in the world is less than $60.00 tracked with 5-7 days. Apparently, winkeyless uses them as well which makes me confident in choosing them.
Post by: FioraCorp on Mon, 02 January 2017, 02:55:00
Anyways, looks like someone was really adamant about getting a SS plate, and submitted for form 40 times with 4 seconds apart each submission :P.That's pretty hilarious. I'm stoked for Brass.
Post by: Citizen404 on Mon, 02 January 2017, 03:30:45
So if I order the M65 with nylon base, does that come with switches/rgb diodes (or would that be something offered separately during the order form phase).
Also would you consider offering pre-assembled kits for those with no soldering experience? Thanks :)
Post by: aznreaper on Mon, 02 January 2017, 03:55:56
This baby has me saving up for my first group buy.
So if I order the M65 with nylon base, does that come with switches/rgb diodes (or would that be something offered separately during the order form phase).
Also would you consider offering pre-assembled kits for those with no soldering experience? Thanks :)
The group buy is only for the case, plate, weight, and PCB. You will need to supply the switches, stabilizers (I think Jchan was thinking of offering stabilizers to add on, but not sure if he finalized anything yet). By rgb diodes, do you mean the in-switch LED's? Or the lights the shine towards you under the keycaps, as those will not be included either.
I think Jchan did offer assembled kits in his last group buy but was not a fan of it after making all the kits that people ordered so he'll have to decide if he want's to offer that service again. Depending on where you live, there could be people in the community that would be willing to offer their services to build the keyboard for you.
Post by: Drippy on Mon, 02 January 2017, 16:11:13
Post by: BAS1C on Mon, 02 January 2017, 17:59:28
Absolutely hoping to get in on this one.
Me too. Me too...
Post by: Citizen404 on Tue, 03 January 2017, 00:54:27
This baby has me saving up for my first group buy.
So if I order the M65 with nylon base, does that come with switches/rgb diodes (or would that be something offered separately during the order form phase).
Also would you consider offering pre-assembled kits for those with no soldering experience? Thanks :)
The group buy is only for the case, plate, weight, and PCB. You will need to supply the switches, stabilizers (I think Jchan was thinking of offering stabilizers to add on, but not sure if he finalized anything yet). By rgb diodes, do you mean the in-switch LED's? Or the lights the shine towards you under the keycaps, as those will not be included either.
I think Jchan did offer assembled kits in his last group buy but was not a fan of it after making all the kits that people ordered so he'll have to decide if he want's to offer that service again. Depending on where you live, there could be people in the community that would be willing to offer their services to build the keyboard for you.
Thanks for the answer. As for the RGB, I was referring to the lights underneath each keycap (I am assuming that lights that shine through the nylon base are already included).
Post by: duynguyenle on Tue, 03 January 2017, 06:22:22
This baby has me saving up for my first group buy.
So if I order the M65 with nylon base, does that come with switches/rgb diodes (or would that be something offered separately during the order form phase).
Also would you consider offering pre-assembled kits for those with no soldering experience? Thanks :)
The group buy is only for the case, plate, weight, and PCB. You will need to supply the switches, stabilizers (I think Jchan was thinking of offering stabilizers to add on, but not sure if he finalized anything yet). By rgb diodes, do you mean the in-switch LED's? Or the lights the shine towards you under the keycaps, as those will not be included either.
I think Jchan did offer assembled kits in his last group buy but was not a fan of it after making all the kits that people ordered so he'll have to decide if he want's to offer that service again. Depending on where you live, there could be people in the community that would be willing to offer their services to build the keyboard for you.
Thanks for the answer. As for the RGB, I was referring to the lights underneath each keycap (I am assuming that lights that shine through the nylon base are already included).
In-switch individually addressable RGB LEDs are not supported
Post by: jchan94 on Tue, 03 January 2017, 18:22:53
I'm working on settling the last final details, and we're looking to close this IC very soon.
The above questions have been properly answered.
For those not aware: if you don't get in on R1, R2 will be available for you and you will be put into a separate list.
Another update: I'm in the final steps of getting my DHL business account, and will update you shortly on that.
Alternatively, SF express sounds amazing. I just hope that they have a good integration so I don't have to copy -> pasta your addresses one by one.
Post by: nmur on Tue, 03 January 2017, 18:29:18
if you don't get in on R1
sorry if it's been answered somewhere in the thread, but will this run have limited numbers?
Post by: Captainbuttmonkey on Tue, 03 January 2017, 18:30:15
Post by: FLOCKA on Tue, 03 January 2017, 18:30:36
200 for R1, unlimited for R2if you don't get in on R1
sorry if it's been answered somewhere in the thread, but will this run have limited numbers?
Post by: nmur on Tue, 03 January 2017, 18:43:55
200 for R1, unlimited for R2if you don't get in on R1
sorry if it's been answered somewhere in the thread, but will this run have limited numbers?
cheers
Post by: Tom_Kazansky on Tue, 03 January 2017, 19:56:41
it would be great if you also offer screw-in stabs :D
Post by: jchan94 on Tue, 03 January 2017, 20:27:15
$40 for a PCB ^-^ , can I grab a few PCBs? (only PCB)
it would be great if you also offer screw-in stabs :D
We'll have a PCB only sale soon. Some quantities come in Mid January or so. Maybe 3rd week to be realistic.
We'll also be releasing the DXF base file for it (so you can see the size schematic and such) to build your own case once the inventory has come in.
We'll also be releasing the plate design after the R1 GB has concluded which will be under some type of license (or we'll release it sooner, gotta ponder on this more).
We'll be offering the PCB screw in stabs from GMK for an additional cost.
Post by: BAS1C on Tue, 03 January 2017, 22:17:39
$40 for a PCB ^-^ , can I grab a few PCBs? (only PCB)
it would be great if you also offer screw-in stabs :D
We'll have a PCB only sale soon. Some quantities come in Mid January or so. Maybe 3rd week to be realistic.
We'll also be releasing the DXF base file for it (so you can see the size schematic and such) to build your own case once the inventory has come in.
We'll also be releasing the plate design after the R1 GB has concluded which will be under some type of license (or we'll release it sooner, gotta ponder on this more).
We'll be offering the PCB screw in stabs from GMK for an additional cost.
Awesome news all around. Cant't wait!
Post by: agHalides on Thu, 05 January 2017, 11:08:37
Sent from my iPhone using Tapatalk
Post by: jchan94 on Thu, 05 January 2017, 19:23:59
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
edit
go live by itself...sometime soon. ~ ~
Post by: hnrk on Thu, 05 January 2017, 19:25:26
Hello everyone,
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
HYPE!
Post by: FLOCKA on Thu, 05 January 2017, 19:25:50
Hello everyone,
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
OMG. Time to pop some champagne! Congrats guys!
Post by: Valaris on Thu, 05 January 2017, 19:31:15
Post by: AceRuckus on Thu, 05 January 2017, 19:31:41
Hello everyone,
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
edit
go live by itself...sometime soon. ~ ~
Will this be an ongoing GB or will there just be limited runs?
Post by: hnrk on Thu, 05 January 2017, 19:33:07
Hello everyone,
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
edit
go live by itself...sometime soon. ~ ~
Will this be an ongoing GB or will there just be limited runs?
So far 200 units or so in R1 and unlimited in R2 has been confirmed.
Post by: AceRuckus on Thu, 05 January 2017, 19:33:46
Hello everyone,
I've updated the top post with some more info as well as a link to the form. It is currently disabled but is scheduled to go live by itself.
Thanks for keeping up with the project.
edit
go live by itself...sometime soon. ~ ~
Will this be an ongoing GB or will there just be limited runs?
So far 200 units or so in R1 and unlimited in R2 has been confirmed.
Thanks!!
Post by: jchan94 on Thu, 05 January 2017, 19:38:30
Make sure to check it out if you're there.
Here is the meetup thing - https://www.reddit.com/r/MechanicalKeyboards/comments/5haj1f/meetup_seattle_winter_meetup_is_upon_us_january/
Also, QuakeMz (Mod @ r/mm) helped assemble the unit together.
You can catch it here - https://www.reddit.com/r/MechanicalKeyboards/comments/5m4lu0/impromptu_building_stream_featuringthe_ramabae65/
Post by: jchan94 on Thu, 05 January 2017, 21:27:12
Please let me know if you have any questions.
Post by: LadyGrey_MN on Thu, 05 January 2017, 21:34:41
Post by: sony on Thu, 05 January 2017, 21:36:11
Post by: Valaris on Thu, 05 January 2017, 21:44:48
I hope it's not first come.
It's a raffle.
Post by: sony on Thu, 05 January 2017, 21:56:31
Well then ladygrey doesn't need to stay up.I hope it's not first come.
It's a raffle.
Post by: Saiph on Thu, 05 January 2017, 22:20:48
edit: nvm, just realized its in the album
Post by: jchan94 on Thu, 05 January 2017, 22:21:27
Hey guys, I think I remember there being a picture with color samples but I can't find it. Does anyone happen to have it? :)
(http://i.imgur.com/lQQmEmc.jpg)
Post by: Photoelectric on Fri, 06 January 2017, 00:21:01
Just figured I'd bring it up as a practical consideration. Unless this plate is going to be treated with something clear and durable. Anodized aluminum is very durable and easy to keep clean in comparison when it comes to switch plates.
Post by: Auxo on Fri, 06 January 2017, 00:50:29
So as much as I think brass would be cool as material for the plate, do keep in mind that it will tarnish with time just by sitting on your desk as well as with any particles of dirt that might fall onto the plate with use, and cleaning will be complicated by all the switches inserted into the plate and being in the way. There are some brass/metal cleaners, like apparently something called Brasso, and other methods, but they generally involve application of a solution and some rubbing for a while, which is risky with switches nearby (not too difficult to get moisture or cleaning solutions into the switches if not being careful). At least the bottom brass weight should be quite easy to clean as needed.
Just figured I'd bring it up as a practical consideration. Unless this plate is going to be treated with something clear and durable. Anodized aluminum is very durable and easy to keep clean in comparison when it comes to switch plates.
Any chance of consideration of a plastic plate? that would be tits
Post by: aznreaper on Fri, 06 January 2017, 01:03:01
Post by: nmur on Fri, 06 January 2017, 01:46:45
So as much as I think brass would be cool as material for the plate, do keep in mind that it will tarnish with time just by sitting on your desk as well as with any particles of dirt that might fall onto the plate with use, and cleaning will be complicated by all the switches inserted into the plate and being in the way. There are some brass/metal cleaners, like apparently something called Brasso, and other methods, but they generally involve application of a solution and some rubbing for a while, which is risky with switches nearby (not too difficult to get moisture or cleaning solutions into the switches if not being careful). At least the bottom brass weight should be quite easy to clean as needed.
Just figured I'd bring it up as a practical consideration. Unless this plate is going to be treated with something clear and durable. Anodized aluminum is very durable and easy to keep clean in comparison when it comes to switch plates.
i agree, brass would be sweet, but in practice i would opt for a dull gold anodized alu plate instead
Post by: wongie on Fri, 06 January 2017, 02:59:15
Post by: kawasaki161 on Fri, 06 January 2017, 03:32:11
i agree, brass would be sweet, but in practice i would opt for a dull gold anodized alu plate instead
But that would defeat the main purpose of the brass plate: the feel (and to some extend the weight). Sure, if you are only aiming for the looks go for it, but brass offers more than that.
Post by: lilschmutz on Fri, 06 January 2017, 07:00:17
I hope it's not first come.
It's a raffle.
Wait, for real? Was planning to stay up tonight myself...jchan, can you confirm? :)
Post by: Valaris on Fri, 06 January 2017, 07:54:22
I hope it's not first come.
It's a raffle.
Wait, for real? Was planning to stay up tonight myself...jchan, can you confirm? :)
It's what he said on discord but I'll let the man confirm for himself.
Post by: Arallu on Fri, 06 January 2017, 08:21:57
Post by: gadzkun on Fri, 06 January 2017, 08:52:12
Post by: nathanrosspowell on Fri, 06 January 2017, 09:07:01
Raffle - people complain.
There's going to be a round 2 people. Chill out a bit.
If you don't get to win the limited Hydro colorway that is a shame, yes, but no one ever said buying the keyset gives you dibs in this GB :rolleyes:
Post by: kitchenace13 on Fri, 06 January 2017, 09:11:15
Also in case you haven't seen it, or someone else hasn't posted it, here is a Youtube build video by Quakemz of the good prototype.
Post by: wongie on Fri, 06 January 2017, 09:11:47
Post by: Captainbuttmonkey on Fri, 06 January 2017, 09:16:03
Is anyone else having issues with the Google form saying "Loading..."?
Also in case you haven't seen it, or someone else hasn't posted it, here is a Youtube build video by Quakemz of the good prototype.
The form isn't open yet bud, I think it's opening at midnight tonight (PST)
Post by: kitchenace13 on Fri, 06 January 2017, 09:17:45
Post by: Photoelectric on Fri, 06 January 2017, 13:30:06
As someone who knows nothing about brass, dose the tarnish need to be continually maintained and cleaned off to prevent damage or is it something purely visual that can be left on till the day you die?
There's no practical downside to tarnished brass. It will simply have the dull more green and spotty appearance as opposed to the shiny uniform gold appearance. It won't do any damage to your switches. But if you care about having the plate looking pristine and shiny like new over time, then anodized aluminum should be your choice.
Post by: Saiph on Fri, 06 January 2017, 15:32:46
There's no practical downside to tarnished brass. It will simply have the dull more green and spotty appearance as opposed to the shiny uniform gold appearance. It won't do any damage to your switches. But if you care about having the plate looking pristine and shiny like new over time, then anodized aluminum should be your choice.I wonder how people deal with it for korean customs. I know kin offers brass plates for his boards.
Post by: jchan94 on Fri, 06 January 2017, 16:32:55
First come first server - people complain.
Raffle - people complain.
There's going to be a round 2 people. Chill out a bit.
If you don't get to win the limited Hydro colorway that is a shame, yes, but no one ever said buying the keyset gives you dibs in this GB :rolleyes:
Everything Nathan says +1. :)
Is anyone else having issues with the Google form saying "Loading..."?
Also in case you haven't seen it, or someone else hasn't posted it, here is a Youtube build video by Quakemz of the good prototype.
The google form just says Loading because its closed lol.
FYI. Opens tomorrow night as we finalize the last details tonight.
Post by: jchan94 on Fri, 06 January 2017, 17:52:49
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Post by: Valaris on Fri, 06 January 2017, 18:00:44
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
That's not bad for Canada. Good to know!
A LOT of bonus points for giving us another option than DHL for Canada.
Post by: hnrk on Fri, 06 January 2017, 18:53:17
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?
Post by: dr-slump on Fri, 06 January 2017, 19:29:43
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?
It usually does include insurance to around $500 or so. Tracking is generally provided but not really accurate imo.
Post by: Tally810 on Fri, 06 January 2017, 19:44:55
Post by: jchan94 on Fri, 06 January 2017, 20:22:00
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?
It usually does include insurance to around $500 or so. Tracking is generally provided but not really accurate imo.
Will double check on the insurance part, but all the options are tracked. I personally trust DHL internationally without a sweat.
Post by: jchan94 on Fri, 06 January 2017, 21:14:00
Weight: 6lbs calculation, to account for packaging.
USPS Priority International w/ $600 USD Insurance: $68.00 - $74.00
DHL to Canada: $52.00
DHL to EU: $78 - 82 (Most Zones); Some are $130.00 like Poland.
DHL to Asia: $78 - 115
This is the general idea. These are specific to zones (or areas), and you'll be charged accordingly.
If you have a specific one you want me to check, please let me know by posting your Country below :).
I would highly recommend going with DHL for international transit for this.
Post by: dr-slump on Fri, 06 January 2017, 21:17:11
Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?Hi everyone,
I just got the DHL information. These prices only apply for international deliveries.
An 16in x 8in x 6in box, weighing at 5lbs:
DHL Express: $95.00 - $105.00 Depending on destination
USPS Priority International w/ $600 USD Insurance: $68.00
USPS Priority International w/ $600 USD Insurance to Canada: $50.00
Does DHL also include insurance? And do all options include tracking?
It usually does include insurance to around $500 or so. Tracking is generally provided but not really accurate imo.
Will double check on the insurance part, but all the options are tracked. I personally trust DHL internationally without a sweat.
sorry. got nothing against DHL. use it almost daily. just meant that their tracking system is a bit slow. :D
Post by: hnrk on Fri, 06 January 2017, 21:32:10
Just got some updated data. I think we'll roll with this instead.
Weight: 6lbs calculation, to account for packaging.
USPS Priority International w/ $600 USD Insurance: $68.00
DHL to Canada: $52.00
DHL to EU: $78 - 82 (Most Zones); Some are $130.00 like Poland.
DHL to Asia: $78 - 115
This is the general idea. These are specific to zones (or areas), and you'll be charged accordingly.
If you have a specific one you want me to check, please let me know by posting your Country below :).
I would highly recommend going with DHL for international transit for this.
Quote for Australia please! :))
Post by: jchan94 on Fri, 06 January 2017, 21:35:09
Just got some updated data. I think we'll roll with this instead.
Weight: 6lbs calculation, to account for packaging.
USPS Priority International w/ $600 USD Insurance: $68.00
DHL to Canada: $52.00
DHL to EU: $78 - 82 (Most Zones); Some are $130.00 like Poland.
DHL to Asia: $78 - 115
This is the general idea. These are specific to zones (or areas), and you'll be charged accordingly.
If you have a specific one you want me to check, please let me know by posting your Country below :).
I would highly recommend going with DHL for international transit for this.
Quote for Australia please! :))
$83.00 with DHL
$74 with USPS.
Typically, USPS to Australia isn't an issue. I've sent Rama, Flehrad, and Coz a few things before without hiccup.
Post by: hnrk on Fri, 06 January 2017, 21:50:35
Just got some updated data. I think we'll roll with this instead.
Weight: 6lbs calculation, to account for packaging.
USPS Priority International w/ $600 USD Insurance: $68.00
DHL to Canada: $52.00
DHL to EU: $78 - 82 (Most Zones); Some are $130.00 like Poland.
DHL to Asia: $78 - 115
This is the general idea. These are specific to zones (or areas), and you'll be charged accordingly.
If you have a specific one you want me to check, please let me know by posting your Country below :).
I would highly recommend going with DHL for international transit for this.
Quote for Australia please! :))
$83.00 with DHL
$74 with USPS.
Typically, USPS to Australia isn't an issue. I've sent Rama, Flehrad, and Coz a few things before without hiccup.
Okay awesome. Thanks for the quick replies jchan!
Post by: Sissy on Sat, 07 January 2017, 05:17:50
Post by: sony on Sat, 07 January 2017, 05:22:29
That is some hefty shipping cost.It's a hefty keyboard.
Post by: pon10 on Sat, 07 January 2017, 05:48:42
Post by: LadyGrey_MN on Sat, 07 January 2017, 06:47:14
Post by: sony on Sat, 07 January 2017, 06:49:47
Form wasn't working at midnight your time.. (2 am mine), still not working...Hey said a few post back that it'd go live tonight.
Post by: LadyGrey_MN on Sat, 07 January 2017, 06:58:08
Form wasn't working at midnight your time.. (2 am mine), still not working...Hey said a few post back that it'd go live tonight.
Ugh. Midnight tonight? Then it really starts on the 8th. Thanks!
Post by: sony on Sat, 07 January 2017, 07:00:24
Maybe midnight for you. 🤷 no clue though. It's jchans birthday today (super sensitive private information), so it'll probably come late after dinner at the earliest. He probably has plans with his girlfriend or family.Form wasn't working at midnight your time.. (2 am mine), still not working...Hey said a few post back that it'd go live tonight.
Ugh. Midnight tonight? Then it really starts on the 8th. Thanks!
Post by: LadyGrey_MN on Sat, 07 January 2017, 07:08:07
Maybe midnight for you. 🤷 no clue though. It's jchans birthday today (super sensitive private information), so it'll probably come late after dinner at the earliest. He probably has plans with his girlfriend or family.Form wasn't working at midnight your time.. (2 am mine), still not working...Hey said a few post back that it'd go live tonight.
Ugh. Midnight tonight? Then it really starts on the 8th. Thanks!
Haha, gotcha, thanks for the intel. Happy Day Jchan! Have a great one! I'll check again later.
Post by: kmba on Sat, 07 January 2017, 12:56:34
Post by: Biggestmac on Sat, 07 January 2017, 13:08:45
Post by: trexous on Sat, 07 January 2017, 15:36:29
Post by: afrokobe on Sat, 07 January 2017, 18:43:09
Post by: duynguyenle on Sat, 07 January 2017, 18:58:37
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Post by: hnrk on Sat, 07 January 2017, 19:04:27
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
Post by: Captainbuttmonkey on Sat, 07 January 2017, 19:05:50
Post by: hnrk on Sat, 07 January 2017, 19:08:44
Just want to check I'm not missing something here. The form is gunna go live at some point tonight but the buy is being done as a raffle. The form is open till the 11th so I don't quite get why people are eager to submit their entry asap tonight? As long as you do it before the 11th it doesn't make any difference right? I'm guessing it's just excitement, which I can understand as I really want to get in too but just wanted to make sure? =].
Yeah that seems about right. Although jchan hasn't said in this thread that the GB will indeed be a raffle (however someone mentioned that he said it would be in Discord), so perhaps people just want to be sure? :p
Post by: duynguyenle on Sat, 07 January 2017, 19:37:03
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
I probably misintepreted that then. AFAIK, the form is only for Round 1
Post by: Tally810 on Sat, 07 January 2017, 20:13:04
Post by: Photoelectric on Sat, 07 January 2017, 20:35:42
Post by: Rumblehotep on Sat, 07 January 2017, 20:45:57
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
Was the possible timeframe for Round 2 ever mentioned?
Post by: breusch91 on Sat, 07 January 2017, 21:59:03
Just want to check I'm not missing something here. The form is gunna go live at some point tonight but the buy is being done as a raffle. The form is open till the 11th so I don't quite get why people are eager to submit their entry asap tonight? As long as you do it before the 11th it doesn't make any difference right? I'm guessing it's just excitement, which I can understand as I really want to get in too but just wanted to make sure? =].
Yeah that seems about right. Although jchan hasn't said in this thread that the GB will indeed be a raffle (however someone mentioned that he said it would be in Discord), so perhaps people just want to be sure? :p
Check the OP. One of the first couple sentences says "limited to 200 /w raffle"
Sent from my iPhone using Tapatalk
Post by: hnrk on Sat, 07 January 2017, 22:01:42
Just want to check I'm not missing something here. The form is gunna go live at some point tonight but the buy is being done as a raffle. The form is open till the 11th so I don't quite get why people are eager to submit their entry asap tonight? As long as you do it before the 11th it doesn't make any difference right? I'm guessing it's just excitement, which I can understand as I really want to get in too but just wanted to make sure? =].
Yeah that seems about right. Although jchan hasn't said in this thread that the GB will indeed be a raffle (however someone mentioned that he said it would be in Discord), so perhaps people just want to be sure? :p
Check the OP. One of the first couple sentences says "limited to 200 /w raffle"
Sent from my iPhone using Tapatalk
Ah that must've been edited in, thanks for pointing it out!
Post by: FLOCKA on Sat, 07 January 2017, 22:02:33
Post by: Jedi on Sat, 07 January 2017, 22:06:55
Post by: afrokobe on Sat, 07 January 2017, 22:09:11
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
I probably misintepreted that then. AFAIK, the form is only for Round 1
Yea sorry didn't probably state that well. I don't have the funds for round 1 right now, but would like to enter for round 2. I just was not sure if to be considered for round 2, if you had to have entered in the first round. Kind of like a sale for people who didn't make it in the first round.
Post by: kmba on Sat, 07 January 2017, 22:09:30
Post by: kmba on Sat, 07 January 2017, 22:11:14
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
I probably misintepreted that then. AFAIK, the form is only for Round 1
Yea sorry didn't probably state that well. I don't have the funds for round 1 right now, but would like to enter for round 2. I just was not sure if to be considered for round 2, if you had to have entered in the first round. Kind of like a sale for people who didn't make it in the first round.
Round 2 was said to be unlimited, so you should be able to get in no question. The one difference being the colors won't be same same in R2. JChan said "2 most popular from R1" plus a few others (maybe green.. maroon, etc). so if there's something you're dying to get now like campaign or rose or hydro, I'd probably enter now.
Post by: yokken on Sat, 07 January 2017, 22:11:45
Post by: FLOCKA on Sat, 07 January 2017, 22:13:20
Round 2 was said to be unlimited, so you should be able to get in no question. The one difference being the colors won't be same same in R2. JChan said "2 most popular from R1" plus a few others (maybe green.. maroon, etc). so if there's something you're dying to get now like campaign or rose or hydro, I'd probably enter now.
Yeah, I'm hoping that Space Grey is at least one of those 2 most popular colors, so even if I pull the short straw on R1, it'll still be an option in R2. Good luck to all.
Post by: hnrk on Sat, 07 January 2017, 22:15:15
Post by: eldridge on Sat, 07 January 2017, 22:27:43
Amazing work jchan and RAMA!
Post by: xv on Sat, 07 January 2017, 22:34:12
Post by: afrokobe on Sat, 07 January 2017, 22:38:53
If I rather wait for round 2 of buy, should I still enter in the raffle?
No I think that's rather selfish, if you win the raffle, that means there's someone who really would like to get the first round would've missed out
Perhaps afrokobe was asking about how to enter Round 2. To answer that, I assume you can just opt in when Round 2 comes around. The raffle is just for Round 1.
If they didn't mean that, then I agree with you hah.
I probably misintepreted that then. AFAIK, the form is only for Round 1
Yea sorry didn't probably state that well. I don't have the funds for round 1 right now, but would like to enter for round 2. I just was not sure if to be considered for round 2, if you had to have entered in the first round. Kind of like a sale for people who didn't make it in the first round.
Round 2 was said to be unlimited, so you should be able to get in no question. The one difference being the colors won't be same same in R2. JChan said "2 most popular from R1" plus a few others (maybe green.. maroon, etc). so if there's something you're dying to get now like campaign or rose or hydro, I'd probably enter now.
awh, I didn't know that was the case. The girlfriend really wants rose gold D:
Post by: helpslipknotfranklins on Sat, 07 January 2017, 22:40:07
Post by: Madēo on Sat, 07 January 2017, 22:53:10
Good luck to you all :)
Great work RAMAxJchan!
Post by: Rumblehotep on Sat, 07 January 2017, 22:56:00
Thanks jchan and RAMA!!
Post by: LadyGrey_MN on Sat, 07 January 2017, 23:04:29
Haven't heard if the rgb is configurable, hope it is.
Post by: bthezebra on Sat, 07 January 2017, 23:42:27
Sent from my SM-G900V using Tapatalk
Post by: Valaris on Sat, 07 January 2017, 23:50:20
Hope I filled it out right. The PayPal address is the literal address or did he also want to include the email?Your paypal address is your email.
Sent from my SM-G900V using Tapatalk
Post by: oatmicro on Sat, 07 January 2017, 23:50:45
Hope I filled it out right. The PayPal address is the literal address or did he also want to include the email?
Sent from my SM-G900V using Tapatalk
just an e-mail
Post by: iamtootallforthis on Sun, 08 January 2017, 00:21:59
Post by: fancymans on Sun, 08 January 2017, 00:24:17
I don't have to choose between the nylon and the rose gold base, I can get both???
Thanks jchan and RAMA!!
Yes you can get both. Choose Nylon as primary, and then later there is an option to add an additional aluminum bottom plate.
Post by: DreLLin on Sun, 08 January 2017, 03:35:35
Post by: KHAANNN on Sun, 08 January 2017, 04:05:05
The keyboard is just incredible, I'm not a big fan of 65%'s with crammed arrows, yet I still really want one, the design/heft/quality would be enough to make me forget my layout obsessions
I wonder whether Paypal is the only payment option, not sure whether I can afford to spoil myself, but If I end up entering the raffle, I wonder if there is a CC Processor or Amazon Payments option available, Thanks (Can't use Paypal, they disabled accounts from my country, sadly)
Post by: kawasaki161 on Sun, 08 January 2017, 04:13:26
Post by: pon10 on Sun, 08 January 2017, 04:30:11
Hope I filled it out right. The PayPal address is the literal address or did he also want to include the email?
Sent from my SM-G900V using Tapatalk
just an e-mail
Damn! i was wondering after i finished the form why i didn't have to put a paypal email.. Should i redo a form? or would it just make it messy i wonder..
Post by: oatmicro on Sun, 08 January 2017, 05:55:41
Hope I filled it out right. The PayPal address is the literal address or did he also want to include the email?
Sent from my SM-G900V using Tapatalk
just an e-mail
Damn! i was wondering after i finished the form why i didn't have to put a paypal email.. Should i redo a form? or would it just make it messy i wonder..
i don't suggest you to redo the form because in the raffle system group buy you might disqualify if you got the tickets more than one.
I believe you can correct it after the winners list announced(and you won).
the best way is send a PM to jchan directly, but I think you can wait until the winners list announced.
Post by: pon10 on Sun, 08 January 2017, 06:09:36
Hope I filled it out right. The PayPal address is the literal address or did he also want to include the email?
Sent from my SM-G900V using Tapatalk
just an e-mail
Damn! i was wondering after i finished the form why i didn't have to put a paypal email.. Should i redo a form? or would it just make it messy i wonder..
i don't suggest you to redo the form because in the raffle system group buy you might disqualify if you got the tickets more than one.
I believe you can correct it after the winners list announced(and you won).
the best way is send a PM to jchan directly, but I think you can wait until the winners list announced.
Yes don't wanna get disqualified.. Thanks. hopefully it wont be a problem :)
Post by: pr0ximity on Sun, 08 January 2017, 10:28:18
There's no practical downside to tarnished brass. It will simply have the dull more green and spotty appearance as opposed to the shiny uniform gold appearance. It won't do any damage to your switches. But if you care about having the plate looking pristine and shiny like new over time, then anodized aluminum should be your choice.I wonder how people deal with it for korean customs. I know kin offers brass plates for his boards.
You can clean it fairly easily. Alternatively, you can cover it with tape so it doesn't oxidize. If I get in on this round with the brass plate I'll probably be cutting some sort of 3M film to protect the exposed sides of the plate.
The weight sounds like it will be protected though.
Post by: nathanrosspowell on Sun, 08 January 2017, 15:57:57
Everyone make sure that rose gold makes it into R2 just in case ;)
Post by: Photoelectric on Sun, 08 January 2017, 16:13:09
I entered :thumb:
Everyone make sure that rose gold makes it into R2 just in case ;)
I think all the less common colors will likely be in round 1. Seeing as R2 will only include 2 of the most ordered colors + some new colors, anything that doesn't get as much support will be in R1. So if champagne or rose gold are not as popular, they will be in R1. That's my guess, because it just makes sense in terms of the logistical perspective.
Post by: nathanrosspowell on Sun, 08 January 2017, 16:28:31
I entered :thumb:
Everyone make sure that rose gold makes it into R2 just in case ;)
I think all the less common colors will likely be in round 1. Seeing as R2 will only include 2 of the most ordered colors + some new colors, anything that doesn't get as much support will be in R1. So if champagne or rose gold are not as popular, they will be in R1. That's my guess, because it just makes sense in terms of the logistical perspective.
Yeah, I figured. That's why I'm cheering on people to make rose gold popular ;)
Post by: mattijs on Sun, 08 January 2017, 23:35:56
Post by: Brammm87 on Mon, 09 January 2017, 01:31:49
Here's hoping I get to spending that money.
Post by: testplsignore on Mon, 09 January 2017, 01:57:10
Post by: msilvv on Mon, 09 January 2017, 03:09:25
For those who haven't heard, looks like the 200 cap is no more!
And yesterday the M67-A went public... I'm gonna be able to get my hands on both these boards after all! so stoked. Thank you Jchan and Rama!
Post by: Arallu on Mon, 09 January 2017, 08:18:00
First come first server - people complain.
Raffle - people complain.
There's going to be a round 2 people. Chill out a bit.
If you don't get to win the limited Hydro colorway that is a shame, yes, but no one ever said buying the keyset gives you dibs in this GB :rolleyes:
Am chill, but thanks for the positivity /s
Seems it doesn't matter now though.
Post by: jal on Mon, 09 January 2017, 09:27:39
And yesterday the M67-A went public... [snip]
Wah? Where?
Post by: nathanrosspowell on Mon, 09 January 2017, 09:49:02
And yesterday the M67-A went public... [snip]
Wah? Where?
https://geekhack.org/index.php?topic=86815.0
Post by: jal on Mon, 09 January 2017, 11:22:47
Wah? Where?https://geekhack.org/index.php?topic=86815.0
Wow, completely missed that. Thank you.
Post by: topsykrett on Mon, 09 January 2017, 12:37:29
Post by: kawasaki161 on Mon, 09 January 2017, 12:38:54
Is the sandwich case still being offered as an additional option?IIRC it will be sold separately from this buy in keyclack.com at some point.
Post by: testplsignore on Mon, 09 January 2017, 21:27:30
Or have I got my numbers wrong :S
Post by: jchan94 on Mon, 09 January 2017, 22:10:17
If all goes to plan, these should be shipping out in April, right?
Or have I got my numbers wrong :S
That sounds roughly correct. 10-12 Weeks is the plan. With allowing more than 200, we might see a slight hiccup, but I will tell everyone of the process. The supply chain is very good with the manufacturers :thumb:
Please also go to the GB thread. I've minimized the top post to direct people there :)
Post by: breusch91 on Tue, 10 January 2017, 12:48:58
If all goes to plan, these should be shipping out in April, right?
Or have I got my numbers wrong :S
That sounds roughly correct. 10-12 Weeks is the plan. With allowing more than 200, we might see a slight hiccup, but I will tell everyone of the process. The supply chain is very good with the manufacturers :thumb:
Please also go to the GB thread. I've minimized the top post to direct people there :)
Jchan if I wanted to make any changes to my form should I pm you now or later? Thinking about adding the acrylic bottom and brass/steel plate instead of aluminum since I'm worried about the "give" the board will have with aluminum after seeing a video of someone demoing it.
Sent from my iPhone using Tapatalk
Post by: CMYK on Tue, 10 January 2017, 12:54:03
Post by: sony on Tue, 10 January 2017, 13:06:21
I wish I could picture a hydro blue top and hydro aluminum bottom. The google form recommended contrasting colors, but does the same top and bottom color look bad?It probably doesn't look bad but the lines with a contrasting color look 👌👌
Post by: dr-slump on Fri, 13 January 2017, 09:25:37
Post by: Zanduby on Fri, 13 January 2017, 13:29:32
yessssss. got one !!!
YAY! so did everyone else who entered!
Post by: pixelpusher on Fri, 13 January 2017, 13:51:34
yessssss. got one !!!
YAY! so did everyone else who entered!
But what about those who didn't enter? ;D
Don't spoil his excitement! I'm excited for my purchase too :thumb:
Congrats to everyone who signed up and helped show support for unique and beautiful things!
Post by: ghostjuggernaut on Fri, 13 January 2017, 13:58:46
:thumb: