geekhack

geekhack Community => Keyboards => Topic started by: happylacquer on Mon, 13 February 2017, 23:16:10

Title: Model F AT to PS2
Post by: happylacquer on Mon, 13 February 2017, 23:16:10
Is this easy to do? It looks like you can get a Model F board nice and cheap on ebay at any time. Is it just wiring the 4 wires on your ps2 cable and boom?
Title: Re: Model F AT to PS2
Post by: Tactile on Mon, 13 February 2017, 23:28:16
All you need is one of these:
[attach=1]
Title: Re: Model F AT to PS2
Post by: happylacquer on Mon, 13 February 2017, 23:36:23
All you need is one of these:
(Attachment Link)

I guess if a passive adapter is fine there shouldn't be any issue replacing the internal cable with a PS2 one?
Title: Re: Model F AT to PS2
Post by: Tactile on Mon, 13 February 2017, 23:36:47
And, yes, if you want to hand wire it's just a matter of changing the connector.
Title: Re: Model F AT to PS2
Post by: Wingklip on Tue, 14 February 2017, 03:18:28
Passive adapter works 100%. Don't desolder it you silly :eek:
Title: Re: Model F AT to PS2
Post by: fohat.digs on Tue, 14 February 2017, 07:50:05

you can get a Model F board nice and cheap on ebay at any time


When and where? F ATs have become much more expensive and harder to find in the last couple of years.
 
Title: Re: Model F AT to PS2
Post by: chyros on Tue, 14 February 2017, 08:07:44

you can get a Model F board nice and cheap on ebay at any time


When and where? F ATs have become much more expensive and harder to find in the last couple of years.
I think he means Model Fs in general. The XT ones are much more forthcoming.
Title: Re: Model F AT to PS2
Post by: fohat.digs on Tue, 14 February 2017, 08:31:20

The XT ones are much more forthcoming.


Without a doubt, but the thread title says "AT" and most of the discussion is around passive adapters, etc.

Any other Model F requires "conversion" of some type to USB, and PS/2 is not an option.