geekhack

geekhack Community => Off Topic => Topic started by: tp4tissue on Mon, 10 April 2017, 18:59:22

Title: Tp4 wants Nt-Cutter
Post by: tp4tissue on Mon, 10 April 2017, 18:59:22: But. Tp4 am afraid to try new things.. [attachimg=1]

What ya'll think... Tp4 haz the Olfa right now.
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Mon, 10 April 2017, 19:00:25: Speak English TP.

I ordered a nut milk bag today.
Title: Re: Tp4 wants Nt-Cutter
Post by: nmur on Mon, 10 April 2017, 19:05:04: Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
nut milk

ew
Title: Re: Tp4 wants Nt-Cutter
Post by: tp4tissue on Mon, 10 April 2017, 19:10:03: Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

hahaha..

make sure to get a large one, because the smaller ones you can't squeeze as easily, and the holes clog really fast.. so the larger the bag, the less you have to go in and clear out the swarf.
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Mon, 10 April 2017, 19:20:20: Quote from: tp4tissue on Mon, 10 April 2017, 19:10:03
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

hahaha..

make sure to get a large one, because the smaller ones you can't squeeze as easily, and the holes clog really fast.. so the larger the bag, the less you have to go in and clear out the swarf.
12" x 12"

Gonna use it to make some cold brew coffee.
Title: Re: Tp4 wants Nt-Cutter
Post by: Sent on Mon, 10 April 2017, 19:22:01: If there's one constant that will always be in my life, it's amusing tp4 OT threads on GH. Bless.
Title: Re: Tp4 wants Nt-Cutter
Post by: romevi on Mon, 10 April 2017, 19:35:20: Analogue Nt?
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Mon, 10 April 2017, 19:44:06: https://m.youtube.com/watch?v=CCVmsRYQCv8

Nt vs olfa etc
Title: Re: Tp4 wants Nt-Cutter
Post by: fanpeople on Mon, 10 April 2017, 19:44:55: Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

[attachimg=1]
Title: Re: Tp4 wants Nt-Cutter
Post by: noisyturtle on Mon, 10 April 2017, 20:06:42: even by tp standards, this is a ****ty post
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Mon, 10 April 2017, 20:08:25: Quote from: fanpeople on Mon, 10 April 2017, 19:44:55
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

(Attachment Link)
(http://uploads.tapatalk-cdn.com/20170411/d9b8ea013a37a186da8ef922b21cdf02.jpg)
Title: Re: Tp4 wants Nt-Cutter
Post by: tp4tissue on Mon, 10 April 2017, 20:40:57: Quote from: SpAmRaY on Mon, 10 April 2017, 20:08:25
Quote from: fanpeople on Mon, 10 April 2017, 19:44:55
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

(Attachment Link)
Show Image
(http://uploads.tapatalk-cdn.com/20170411/d9b8ea013a37a186da8ef922b21cdf02.jpg)

I'm not sure you need this for cold brew unless you're planning on making gallons at a time ?

the reason is.. you'd be using coarse grinds for cold brew.. and they settle really fast to the bottom of the jar, so if you just pour over a regular smaller filter, only very little grinds will actually reach the lip of the vessel you're pouring out of..

I just use my regular stainless steel mesh sieve and it's only 3inches diameter round. I would say this small sieve is enough to filter 5 to 10 liters of cold brew before being filled up
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Mon, 10 April 2017, 21:06:16: Quote from: tp4tissue on Mon, 10 April 2017, 20:40:57
Quote from: SpAmRaY on Mon, 10 April 2017, 20:08:25
Quote from: fanpeople on Mon, 10 April 2017, 19:44:55
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

(Attachment Link)
Show Image
(http://uploads.tapatalk-cdn.com/20170411/d9b8ea013a37a186da8ef922b21cdf02.jpg)

I'm not sure you need this for cold brew unless you're planning on making gallons at a time ?

the reason is.. you'd be using coarse grinds for cold brew.. and they settle really fast to the bottom of the jar, so if you just pour over a regular smaller filter, only very little grinds will actually reach the lip of the vessel you're pouring out of..

I just use my regular stainless steel mesh sieve and it's only 3inches diameter round. I would say this small sieve is enough to filter 5 to 10 liters of cold brew before being filled up

So long as I can clean it good enough I can also use this thing for yogurt etc.
Title: Re: Tp4 wants Nt-Cutter
Post by: heedpantsnow on Tue, 11 April 2017, 07:12:44: Quote from: SpAmRaY on Mon, 10 April 2017, 21:06:16
Quote from: tp4tissue on Mon, 10 April 2017, 20:40:57
Quote from: SpAmRaY on Mon, 10 April 2017, 20:08:25
Quote from: fanpeople on Mon, 10 April 2017, 19:44:55
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

(Attachment Link)
Show Image
(http://uploads.tapatalk-cdn.com/20170411/d9b8ea013a37a186da8ef922b21cdf02.jpg)

I'm not sure you need this for cold brew unless you're planning on making gallons at a time ?

the reason is.. you'd be using coarse grinds for cold brew.. and they settle really fast to the bottom of the jar, so if you just pour over a regular smaller filter, only very little grinds will actually reach the lip of the vessel you're pouring out of..

I just use my regular stainless steel mesh sieve and it's only 3inches diameter round. I would say this small sieve is enough to filter 5 to 10 liters of cold brew before being filled up

So long as I can clean it good enough I can also use this thing for yogurt etc.

I use a paint strainer bag to make almond milk. Was $3.99 at Lowe's for 2!

Though I will say that it's hard to make almond milk for less than $3.50 (what a carton costs at the store) unless you have an exceptionally cheap source of almonds.

With cold brew, make sure you use a good grinder. Coarse grinding is the hardest for a grinder to do consistently.
Title: Re: Tp4 wants Nt-Cutter
Post by: SpAmRaY on Tue, 11 April 2017, 07:23:43: Quote from: heedpantsnow on Tue, 11 April 2017, 07:12:44
With cold brew, make sure you use a good grinder. Coarse grinding is the hardest for a grinder to do consistently.

I've got one of those Japanese hand grinders, it works good for the aeropress.

I'll just have to figure out how to change the settings on it.

Of course it doesn't do much at one time.
Title: Re: Tp4 wants Nt-Cutter
Post by: heedpantsnow on Tue, 11 April 2017, 07:25:34: Quote from: SpAmRaY on Tue, 11 April 2017, 07:23:43

Quote from: heedpantsnow on Tue, 11 April 2017, 07:12:44
With cold brew, make sure you use a good grinder. Coarse grinding is the hardest for a grinder to do consistently.

I've got one of those Japanese hand grinders, it works good for the aeropress.

I'll just have to figure out how to change the settings on it.

Of course it doesn't do much at one time.

That will probably work
Title: Re: Tp4 wants Nt-Cutter
Post by: tp4tissue on Tue, 11 April 2017, 07:40:57: Quote from: heedpantsnow on Tue, 11 April 2017, 07:12:44

I use a paint strainer bag to make almond milk. Was $3.99 at Lowe's for 2!

Is there a distinction between food plastic and paint strainer plastic ?
Title: Re: Tp4 wants Nt-Cutter
Post by: fanpeople on Tue, 11 April 2017, 07:44:29: Quote from: SpAmRaY on Mon, 10 April 2017, 21:06:16
Quote from: tp4tissue on Mon, 10 April 2017, 20:40:57
Quote from: SpAmRaY on Mon, 10 April 2017, 20:08:25
Quote from: fanpeople on Mon, 10 April 2017, 19:44:55
Quote from: SpAmRaY on Mon, 10 April 2017, 19:00:25
Speak English TP.

I ordered a nut milk bag today.

(Attachment Link)
Show Image
(http://uploads.tapatalk-cdn.com/20170411/d9b8ea013a37a186da8ef922b21cdf02.jpg)

I'm not sure you need this for cold brew unless you're planning on making gallons at a time ?

the reason is.. you'd be using coarse grinds for cold brew.. and they settle really fast to the bottom of the jar, so if you just pour over a regular smaller filter, only very little grinds will actually reach the lip of the vessel you're pouring out of..

I just use my regular stainless steel mesh sieve and it's only 3inches diameter round. I would say this small sieve is enough to filter 5 to 10 liters of cold brew before being filled up

So long as I can clean it good enough I can also use this thing for yogurt etc.

[attachimg=1]
Title: Re: Tp4 wants Nt-Cutter
Post by: digi on Tue, 11 April 2017, 16:52:30: read the title and thought TP wanted a new Windows NT version, named "Cutter" :D