instabuy
will there be a version with HHKB blockers?
instabuy
will there be a version with HHKB blockers?
For HHKB layout, we might able to make it as an check option.
If it reach MoQ, we can do it :)
We'll also offer 3u cap as kit option.
Surely, also provide other layout as well.
instabuy
will there be a version with HHKB blockers?
I was in your GB for Filco case, very happy with that one, I think I will get in this one too. How many orders needed to get Brass version to go ahead? Can you give rough estimates of cost for both aluminium and brass version?
Edit: Google form is currently private, can you make it public so people can fill in? Thanks!
I was in your GB for Filco case, very happy with that one, I think I will get in this one too. How many orders needed to get Brass version to go ahead? Can you give rough estimates of cost for both aluminium and brass version?
Edit: Google form is currently private, can you make it public so people can fill in? Thanks!
Is it solid brass or just brass coating? I vote for NO underglow
Is it solid brass or just brass coating? I vote for NO underglow
Solid brass with PVD surface treatment.
We'll provide the plate file on git.
In order people want to make some custom options.
Cause our PCB has build in underglow RGB, so we might only offer under glow bottom :)
Is it solid brass or just brass coating? I vote for NO underglow
Solid brass with PVD surface treatment.
We'll provide the plate file on git.
In order people want to make some custom options.
Cause our PCB has build in underglow RGB, so we might only offer under glow bottom :)
Is it solid brass or just brass coating? I vote for NO underglow
Solid brass with PVD surface treatment.
We'll provide the plate file on git.
In order people want to make some custom options.
Cause our PCB has build in underglow RGB, so we might only offer under glow bottom :)Is it solid brass or just brass coating? I vote for NO underglow
Solid brass with PVD surface treatment.
We'll provide the plate file on git.
In order people want to make some custom options.
Cause our PCB has build in underglow RGB, so we might only offer under glow bottom :)
Solid brass is super sweet but not sure about the super shiny PVD surface treatment.
Also i've read many many complaints that acrylic bottoms are the first to crack/break/snap - even with the M65-A.
No stepped caps lock support?I guess that this could easily be supported in the plate but I don't think the PCB itself does.
No stepped caps lock support?Sure, it support.
No stepped caps lock support?Sure, it support.
No stepped caps lock support?Sure, it support.
Unrelated question but does each colour have their own MOQ, and if so how many cases would that be for each? The Tiffany Blue you suggested, Pink (bubblegum/hot), white (that'd have to be powder coated I suppose), etc. would all be colours I'd love to see.
No stepped caps lock support?Sure, it support.
Unrelated question but does each colour have their own MOQ, and if so how many cases would that be for each? The Tiffany Blue you suggested, Pink (bubblegum/hot), white (that'd have to be powder coated I suppose), etc. would all be colours I'd love to see.
At least 15~20 I think.
At least 15~20 I think.
Got it. Not a super small amount of units but I'm pretty sure that with this design and pricing most colours wouldn't have a problem making the cut.
I assume you plan on having some small samples of each colour made at some point?
At least 15~20 I think.
Got it. Not a super small amount of units but I'm pretty sure that with this design and pricing most colours wouldn't have a problem making the cut.
I assume you plan on having some small samples of each colour made at some point?
Not really possible.
We might able to ask for some small piece anodized aluminum samples.
But not able to make samples with different colors for full case.
It cost over $250 for each sample.
If we make sample for each color, it cost thousands.
Very nice looking, can't wait to see some samples ;)Chiwi60?
Only suggestion is may be put a name to the whole thing for easy remember. "Model B" sounds too soft, called it I don't know sennin60 or kiwi60 or something
Cheers :thumb:
Lolita60 :p
Lolita60 :p
DO IT ;D
Lolita60 :p
DO IT ;D
feminists will hang me on the cross :eek:
As any expensive metal case should, this one looks nice, it cannot be other way with any over three hundred bucks buy, but this is nothing new, just another n-th iteration of the same style aluminum-machined-anodized-ala-Mac-case. To say that someone "invented" it is just an exaggeration.
As any expensive metal case should, this one looks nice, it cannot be other way with any over three hundred bucks buy, but this is nothing new, just another n-th iteration of the same style aluminum-machined-anodized-ala-Mac-case. To say that someone "invented" it is just an exaggeration.
Haha,
I mean, some body give me the idea of this.
Can not find proper word back to when I post this.
Not my native language T_T
I've edited it, sorry for the wrong words :(
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Can i reserve a PVD Brass now so i dont miss out?
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Can i reserve a PVD Brass now so i dont miss out?
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Can i reserve a PVD Brass now so i dont miss out?
Hi,
The quotation of brass ver is around 1.6~1.8 times higher than aluminum.
We just need to make sure we won't have too many stock after GB end, or it is too risky :-X.
We 'll consider the quantity of orders, and make sure orders in first few days will get it.
But for guys order it later, will put on the waiting list.
In order somebody might change their mind, and we can sell them to people on the waiting list.
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Can i reserve a PVD Brass now so i dont miss out?
Hi,
The quotation of brass ver is around 1.6~1.8 times higher than aluminum.
We just need to make sure we won't have too many stock after GB end, or it is too risky :-X.
We 'll consider the quantity of orders, and make sure orders in first few days will get it.
But for guys order it later, will put on the waiting list.
In order somebody might change their mind, and we can sell them to people on the waiting list.
Why not require a deposit? Good for you and good for the serous buyer.
Can the keys be reprogrammed? The Alt and Win on the right side dont work for me.
Hello, I am interested, okay, great, byethanks.best reply ever XD
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Update :
Kit options will be :
1. Case kit only
2. Case + PCB kit
3. Case + PCB + laser engraved white/black keycap kit for default layout
*optional 1 : 70 pcs Kailh Box / Cherry switches include
*optional 2 : cherry PCB stabilizer/plate stabilizer(default layout only)
From IC form,
We will go ahead with following colors:
1. PVD Brass (With limited quantity only)
2. Anodized Black
3. Anodized Gray
4. Anodized purple
5. Anodized rose gold
*6. Powdercoated white (Never tried, we have to make some sample see if the surface is strong enough)
And we'll provide layouts (All mount plate is PVD brass)
1. ANSI universal
2. Our default layout
3. HHKB
4. Split space bar fit most PCBs
5. ISO universal
*6. universal for ANSI/ISO (Only make it under Moq reached)
Sample looks great, I'm in for one ;D
I hope Aluminium Silver is a colour option as seen in the renders, it's not on the list above?
Agree that the acrylic or poly bottom would look cheap. I am in for brass bottom or anything tougher :thumb:
Agree that the acrylic or poly bottom would look cheap. I am in for brass bottom or anything tougher :thumb:
Am I the only one that doesn't like the way the weight just screws into the acrylic bottom? It looks and seems like it may feel cheap.Show Image(https://i.imgur.com/0cjGUKC.jpg)
Agree that the acrylic or poly bottom would look cheap. I am in for brass bottom or anything tougher :thumb:
Am I the only one that doesn't like the way the weight just screws into the acrylic bottom? It looks and seems like it may feel cheap.Show Image(https://i.imgur.com/0cjGUKC.jpg)
That's a part that you never touch or even see during regular operation of the keyboard. How is it gonna feel cheap?
How else do you propose the weight be attached if not with screws? Double-sided tape?
I worry about how well the screw threads in the plastic will hold up from repeated disassembly and assembly through the years.
It will be the first thing to go imo.
I worry about how well the screw threads in the plastic will hold up from repeated disassembly and assembly through the years.
It will be the first thing to go imo.
The plastic part is not threaded. What's threaded is the brass plate. The plastic bottom merely has holes drilled into it for the screws to go through...
The only 60% board i'm ever planning to buy so BRASS BOTTOM option please.But then you would be forfeiting the cool underglow! Are you looking to build it with something like a Zeal60 instead?
Very nice case and design :)This may be possible but how much would you be willing to pay for something like this? My understanding is that relative cost to machine this would be a bit higher than usual due to the lower quantities.
However, I wish there was an option for a full brass/alu bottom.
For those who do not want/need the underglow.
Is this happening?Sure is. From what I've heard, they are waiting for the next prototype and will do a full build with it to ensure that everything is good.
There won't have threads in the PC plate.
It has to be a through hole.
Or not able to put the parts together.
And I've tried to make the screw very tight.
and will try it several times more, check if it will crack.
There won't have threads in the PC plate.
It has to be a through hole.
Or not able to put the parts together.
And I've tried to make the screw very tight.
and will try it several times more, check if it will crack.
How will the weight be fixed? Screw and washer?
How will the weight be fixed? Screw and washer?
Threaded holes in the brass plate, through-holes in the polycarbonate bottom, and countersunk screws (or pan/caphead screws) most likely!
Any timeframe for this?Show Image(https://i.imgur.com/4g6fDaT.jpg)Show Image(https://i.imgur.com/uDb5L9J.jpg)Show Image(https://i.imgur.com/W01RRK3.jpg)
The white is made painting now.
But we found another way to make white anodize.
We'll ask for color sample for that.
The other sample is gray one!
Any timeframe for this?Show Image(https://i.imgur.com/4g6fDaT.jpg)Show Image(https://i.imgur.com/uDb5L9J.jpg)Show Image(https://i.imgur.com/W01RRK3.jpg)
The white is made painting now.
But we found another way to make white anodize.
We'll ask for color sample for that.
The other sample is gray one!
Will the DO60 GB expire before this or will this kit include a DO60?
Show Image(https://i.imgur.com/4g6fDaT.jpg)Show Image(https://i.imgur.com/uDb5L9J.jpg)Show Image(https://i.imgur.com/W01RRK3.jpg)
The white is made painting now.
But we found another way to make white anodize.
We'll ask for color sample for that.
The other sample is gray one!
Any timeframe for this?Show Image(https://i.imgur.com/4g6fDaT.jpg)Show Image(https://i.imgur.com/uDb5L9J.jpg)Show Image(https://i.imgur.com/W01RRK3.jpg)
The white is made painting now.
But we found another way to make white anodize.
We'll ask for color sample for that.
The other sample is gray one!
Will the DO60 GB expire before this or will this kit include a DO60?
These look really nice. Great job!
Are there any photos of the board with keycaps installed so we can see how inset they are?
These look really nice. Great job!
Are there any photos of the board with keycaps installed so we can see how inset they are?
If what are you wanting to know is whether there is a visible gap between the walls and the bottom of the keycap, then that's a no. It's a 'true' high profiled board.
This looks great! What will the price be?We might go ahead with blockers for HHKB :)
Any chance for HHKB tops? I would seriously love one in a Crimson Red. ;)
You will also have plates for 6.25u/7u spacebars, right?
Any timeframe for this?
Will the DO60 GB expire before this or will this kit include a DO60?
This looks great! What will the price be?We might go ahead with blockers for HHKB :)
Any chance for HHKB tops? I would seriously love one in a Crimson Red. ;)
You will also have plates for 6.25u/7u spacebars, right?Any timeframe for this?
Will the DO60 GB expire before this or will this kit include a DO60?
It will start soon, but might after PCB gb ended.
Not sure if we can modify the sample before this week.
This looks great! What will the price be?We might go ahead with blockers for HHKB :)
Any chance for HHKB tops? I would seriously love one in a Crimson Red. ;)
You will also have plates for 6.25u/7u spacebars, right?Any timeframe for this?
Will the DO60 GB expire before this or will this kit include a DO60?
It will start soon, but might after PCB gb ended.
Not sure if we can modify the sample before this week.
Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Good news! Please don't start the GB until after Chinese New Year if you can! Busy time of year for me :thumb:
What surface finish will the brass version have? Will it be polished and ptoteched with a clear coat? Raw untreated brass will tarnish very quickly (and also kinda smells unpleasantly metallic)
If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
No, that will be too expensive :(If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
This is just a bit shocking. You’re awesome. Full PVD coated brass HHKB keyboard case is gonna be amazing. I’m in.
No option for full PVD coated brass bottom, right?
Any confirmation on the colors for anode?
Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Seems like the white is painted, not powder coatedHi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Really good prices, especially for the powdercoat white - any estimation on the price for HHKB with Type-C?
No, that will be too expensive :(If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
This is just a bit shocking. You’re awesome. Full PVD coated brass HHKB keyboard case is gonna be amazing. I’m in.
No option for full PVD coated brass bottom, right?
Any confirmation on the colors for anode?
Should offer black, gray, dark purple and rose gold.
Awaiting confirm color reference.
Any reason not to like plate mount? (Have only ever used PCB mount myself)No, that will be too expensive :(If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
This is just a bit shocking. You’re awesome. Full PVD coated brass HHKB keyboard case is gonna be amazing. I’m in.
No option for full PVD coated brass bottom, right?
Any confirmation on the colors for anode?
Should offer black, gray, dark purple and rose gold.
Awaiting confirm color reference.
Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
Seems like the white is painted, not powder coated
Cost 10 extra for aluminum ver., 15 extra for brass.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Really good prices, especially for the powdercoat white - any estimation on the price for HHKB with Type-C?
Seems like the white is painted, not powder coatedIt is powder coated, but not sure paint and powder coated is different in English?
Sent from my mobile using Tapatalk
Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
Any reason not to like plate mount? (Have only ever used PCB mount myself)No, that will be too expensive :(If you didn't crack it, PVD coating will stay pretty long.Hi,
We've got quotation.
And price of group buy will around :
Anodized aluminum : $150
Painted white aluminum : $160
Brass : $250
HHKB and universal usb port (Type-C port as default)has extra cost due to quantity.
Wait...do you mean a BRASS HHKB Case is possible? That is so cool if so!!
Could everything Brass be PVD Coated to avoid tarnishing? Clear coats don’t last too long apparently.
This is just a bit shocking. You’re awesome. Full PVD coated brass HHKB keyboard case is gonna be amazing. I’m in.
No option for full PVD coated brass bottom, right?
Any confirmation on the colors for anode?
Should offer black, gray, dark purple and rose gold.
Awaiting confirm color reference.
Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
Cost 10 extra for aluminum ver., 15 extra for brass.
Cost 10 extra for aluminum ver., 15 extra for brass.
Very fair. Thank you. Last question, will we be able to still purchase your PCB together with the case when the GB for it releases or do we need to get them separately? If we can buy them together, would there be a possibility to buy assembly?
Looking forward to this, many HHKB/60% in general buys lately but this is definitely one of the most interesting ones.
Cost 10 extra for aluminum ver., 15 extra for brass.
Very fair. Thank you. Last question, will we be able to still purchase your PCB together with the case when the GB for it releases or do we need to get them separately? If we can buy them together, would there be a possibility to buy assembly?
Looking forward to this, many HHKB/60% in general buys lately but this is definitely one of the most interesting ones.
I was told the HHKB would only support 6u. :(
I really would’ve liked if it was the 7u version, since there’s no DSA/SA/MT3 6u spacebars. Anyone else agree? :(
Cost 10 extra for aluminum ver., 15 extra for brass.
Very fair. Thank you. Last question, will we be able to still purchase your PCB together with the case when the GB for it releases or do we need to get them separately? If we can buy them together, would there be a possibility to buy assembly?
Looking forward to this, many HHKB/60% in general buys lately but this is definitely one of the most interesting ones.
I was told the HHKB would only support 6u. :(
I really would’ve liked if it was the 7u version, since there’s no DSA/SA/MT3 6u spacebars. Anyone else agree? :(
Seems like the white is painted, not powder coatedIt is powder coated, but not sure paint and powder coated is different in English?
Sent from my mobile using Tapatalk
It is just different paint method in Chinese.
But sometimes will emphasize it.Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
For default layout, plate mount stabs cutout.
I've tried it, also work with pcb stabs, but will be hard to exchange it after finish the keyboard.
For other layout, only PCB mount.
Seems like the white is painted, not powder coatedIt is powder coated, but not sure paint and powder coated is different in English?
Sent from my mobile using Tapatalk
It is just different paint method in Chinese.
But sometimes will emphasize it.Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
For default layout, plate mount stabs cutout.
I've tried it, also work with pcb stabs, but will be hard to exchange it after finish the keyboard.
For other layout, only PCB mount.
Does this pricing include a PCB, or is it just the case + plate?
Seems like the white is painted, not powder coatedIt is powder coated, but not sure paint and powder coated is different in English?
Sent from my mobile using Tapatalk
It is just different paint method in Chinese.
But sometimes will emphasize it.Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
For default layout, plate mount stabs cutout.
I've tried it, also work with pcb stabs, but will be hard to exchange it after finish the keyboard.
For other layout, only PCB mount.
Does this pricing include a PCB, or is it just the case + plate?
Not include PCB
Does the PVD brass case look like brass color or will it work like an anodization and be able to recolor the brass?Yes, but this time will be only one color.
Does the PVD brass case look like brass color or will it work like an anodization and be able to recolor the brass?Yes, but this time will be only one color.
Does the PVD brass case look like brass color or will it work like an anodization and be able to recolor the brass?Yes, but this time will be only one color.
Hey Sen,
Could we get a 7u symmetrical HHKB Top option? :(
Seems like the white is painted, not powder coatedIt is powder coated, but not sure paint and powder coated is different in English?
Sent from my mobile using Tapatalk
It is just different paint method in Chinese.
But sometimes will emphasize it.Understood, thank you!
The plate will only work with plate mount Stabilizers, correct? :(
It would’ve been nice if it could use PCB mounted stabilizers, but for the price I can’t conplain at all. :)
For default layout, plate mount stabs cutout.
I've tried it, also work with pcb stabs, but will be hard to exchange it after finish the keyboard.
For other layout, only PCB mount.
Does this pricing include a PCB, or is it just the case + plate?
Not include PCB
Is the link on the shop for the brass kit also a test? It says the GB for the case kit ends around Feb 14...We're editing it :)
Is the link on the shop for the brass kit also a test? It says the GB for the case kit ends around Feb 14...We're editing it :)
It will have the shiny PVD like the first prototypes. The 2nd batch of prototypes have a matte finish and are coated so they don't tarnish but I think most prefer the shiny version.Is the link on the shop for the brass kit also a test? It says the GB for the case kit ends around Feb 14...We're editing it :)
Will the brass plate and brass weight that comes in the final production version have shiny finish like 1st prototype or sandblasted like the second prototype? Hopefully the first since I prefer the shiny finish (it will be coated with a protective layer right? Raw brass tarnishes easily)
Also is the Feb14th deadline true? Awfully short notice for a case GB!
Looks so good and if I hadn't just picked up two cases I'd be joining this for sure! Will have to keep an eye out for this case down the line though as I do really like it!Obvious solution is to sell the other cases! jk
Hey Sennin,
So no 7u for HHKB? Is it possible to at least make a few?
There are more 7u spacebars, less 6u.
(There are no GMK 6u spacebars for old school sets, no 6u DSA spacebars, no MT3 6u Spacebars, no 6u SA Spacebars)
Also just to be 100% sure, the HHKB Case is actually a HHKB body, correct? With blockers?
I would totally buy a 7u PVD coated brass HHKB Case (with 1.5 blockers on the left and right side).
Thank you!
any chance of a picture or render of design for the hhkb model?
any chance of a picture or render of design for the hhkb model?
Rendering :)
any chance of a picture or render of design for the hhkb model?
Rendering :)
I guess I will wait till the rendering is done before I make my decision. HHKB layout is the only one I'm considering :D
any chance of a picture or render of design for the hhkb model?
It may be sacrilege but a gold HHKB sticker would look so good on that.any chance of a picture or render of design for the hhkb model?
Rendering :)
I guess I will wait till the rendering is done before I make my decision. HHKB layout is the only one I'm considering :Dany chance of a picture or render of design for the hhkb model?
Render from the GB thread for you guys if you havent seenShow Image(https://i.imgur.com/rN3sd6h.jpg)
A numpad matches this case!Show Image(https://imgur.com/K7JQUbv.jpg)
no,A numpad matches this case!Show Image(https://imgur.com/K7JQUbv.jpg)
Oh boy...
Will there be a brass version? Is the GB coming right after this one? ;D