geekhack
geekhack Community => Keyboards => Topic started by: NolandC on Fri, 26 January 2018, 15:22:13
-
Hey guys I recently got a new Vortex Pok3r and have noticed the two spacebar led's have some issues. I was wondering if anyone has had this issue and or know of a fix? The link is to a video of my keyboard.
https://photos.app.goo.gl/ARePou0rOrO5iIfq1 (https://photos.app.goo.gl/ARePou0rOrO5iIfq1)
-
I'm not 100% sure but maybe double check Pok3r manual and see if you were stuck in some sort of programming mode.
I know the bottom 2 LED generally only light up if you're try to set special programming.
-
"I'm not 100% sure but maybe double check Pok3r manual and see if you were stuck in some sort of programming mode.
I know the bottom 2 LED generally only light up if you're try to set special programming."
Hey Hyde thanks for the reply.
I have verified that the programming mode is not the problem by factory resetting the firmware. I have also updated the video to show the issue a little better. I think I'm going to have to open her up and check out the solder points. I'll post my findings for anyone interested.