geekhack

geekhack Community => Keyboards => Topic started by: BDhoel on Sun, 18 March 2018, 10:12:19

Title: PCB makers, can you verify my design?
Post by: BDhoel on Sun, 18 March 2018, 10:12:19

Hello everyone,

Can someone help me verify my PCB design? Here is my layout http://www.keyboard-layout-editor.com/#/gists/192597c47f1e4330ec8626c5ada6497d (http://www.keyboard-layout-editor.com/#/gists/192597c47f1e4330ec8626c5ada6497d). My concern is about the placement of stabilizers and the foot print of non 1u key. This is my PCB design
https://easyeda.com/editor#id=|a8e4d8bbd6be4d99884cb32722743e86 (https://easyeda.com/editor#id=|a8e4d8bbd6be4d99884cb32722743e86)

Thank you.

Title: Re: PCB makers, can you verify my design?
Post by: TalkingTree on Sun, 18 March 2018, 13:35:44

Move:
U14 (and the stab) 10 mil to the right;
U15 10mil to the right;
U29 20mil to the right;
U42 (and the stab) 10 mil to the right;
U55 and U56 10 mil to the right;
U57 and U58 20 mil to the right;

Everything else looks fine to me.

Title: Re: PCB makers, can you verify my design?
Post by: BDhoel on Mon, 19 March 2018, 10:04:13

Quote from: TalkingTree on Sun, 18 March 2018, 13:35:44

Move:
U14 (and the stab) 10 mil to the right;
U15 10mil to the right;
U29 20mil to the right;
U42 (and the stab) 10 mil to the right;
U55 and U56 10 mil to the right;
U57 and U58 20 mil to the right;

Everything else looks fine to me.

Thanks for your time to verify my PCB design. I really appreciate it.  :thumb:

Title: Re: PCB makers, can you verify my design?
Post by: TalkingTree on Mon, 19 March 2018, 15:09:08

Quote from: BDhoel on Mon, 19 March 2018, 10:04:13

Thanks for your time to verify my PCB design. I really appreciate it.  :thumb:

You're very welcome. When in doubt you can generate a plate through swill's builder (http://builder.swillkb.com/) and import the .dxf in your EasyEDA project to see if everything is aligned properly.