geekhack

geekhack Marketplace => Interest Checks => Topic started by: hineybush on Thu, 20 February 2020, 01:00:44

Title: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 01:00:44
my first full tkl design - hence the very creative and unique name!

prototype first
the proto will be WKL and it will be mine
design is pretty much done at this point, just waiting for china to reopen and get back up to speed so i can get a proto ordered.

protos ordered and in. everything is great, I had to make two small changes to the case itself and I also modified the weight a bit to add some more screws (the weight screws are all internal).

I am planning on starting the group buy in mid/late June of this year (2020).

the PCB (h87c-hsp) prototypes are good to go.

(https://live.staticflickr.com/65535/49560092522_c7b88f3acd_4k.jpg)

PCB will be h87c, an h87a with a USB Type C port. the hsp (hiney special project) edition. :)

gonna do burger mount of course, jane v2/koala plate mounting locations, but with a redesigned ish a bit plate

weight is two parts, brass and stainless

6 degree angle

gonna use torx screws

(https://live.staticflickr.com/65535/49560309482_d89cf7c701_4k.jpg)

(https://live.staticflickr.com/65535/49560315647_7d5d245da6_4k.jpg)

full run ETA, will do a proto run then then a public raffle/fcfs/vickrey sort of thing with like 30-40 units, no more than that likely. I do plan on doing multiple runs - goal is to do smaller but more frequent runs/buys, so drop new colors/etc every few months

really wanna do a board in this very light gold
(https://live.staticflickr.com/65535/49562943107_daa435fb70_o.png)

and also this pretty cute purple
(https://live.staticflickr.com/65535/49562692621_a91b9b46a7_o.png)

poly unlikely but hey lol
(https://live.staticflickr.com/65535/49560060082_6a8b97f159_4k.jpg)

keep up with the project!

discord.hiney.cc (http://discord.hiney.cc)
ig.hiney.cc (http://ig.hiney.cc)



Title: Re: [IC] hiney tkl one
Post by: Sycomore on Thu, 20 February 2020, 01:01:34
Lookin' good Hiney. Purple looks gorgeous, Big thumbs up!
Title: Re: [IC] hiney tkl one
Post by: belgium_waffles on Thu, 20 February 2020, 01:03:55
purple looks super nice
Title: Re: [IC] hiney tkl one
Post by: honoka on Thu, 20 February 2020, 01:05:25
polycarb is life. also carbs.
also, plate looks like no iso
Title: Re: [IC] hiney tkl one
Post by: noricon on Thu, 20 February 2020, 01:05:59
lets go bby.
Title: Re: [IC] hiney tkl one
Post by: Lil on Thu, 20 February 2020, 01:06:27
I like both the purple and that hint of champagne
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 01:13:28
polycarb is life. also carbs.
also, plate looks like no iso

yea proto plate will be wkl ansi only since it's for me, but the actual normal version will have option for fixed wkl and universal. will likely do fr4 full + half at least.
Title: [IC] hiney tkl one
Post by: Chocoballzz on Thu, 20 February 2020, 01:14:14
Will sale format be similar to HBCP? :0
But also private buy let me in
Title: Re: [IC] hiney tkl one
Post by: Zach on Thu, 20 February 2020, 01:20:13
Polycarb would be amazing but that purple does look great  :D
Title: Re: [IC] hiney tkl one
Post by: Shenpai on Thu, 20 February 2020, 01:23:54
so nice
Title: Re: [IC] hiney tkl one
Post by: Midori on Thu, 20 February 2020, 01:24:25
hi i can i join closed private buy? thanks
Title: Re: [IC] hiney tkl one
Post by: mcmaxmcmc on Thu, 20 February 2020, 01:29:00
mmm alright cool very cool neat good stuff interesting very  ;D
Title: Re: [IC] hiney tkl one
Post by: OscarPapa on Thu, 20 February 2020, 01:31:27
Looks interesting. Do have your own discord server?
Title: Re: [IC] hiney tkl one
Post by: utsukishi on Thu, 20 February 2020, 01:35:35
i simp for hiney tbh
Title: Re: [IC] hiney tkl one
Post by: 002 DC on Thu, 20 February 2020, 01:38:13
Superb design Hiney!!
Title: Re: [IC] hiney tkl one
Post by: Artemie on Thu, 20 February 2020, 01:41:29
h1 tkl?


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 01:41:53
Will sale format be similar to HBCP? :0
But also private buy let me in

likely similar yeah. not sure if i will do FCFS or raffle, but i'll figure that out.

hi i can i join closed private buy? thanks

yes!

Looks interesting. Do have your own discord server?

discord.hiney.cc

Polycarb would be amazing but that purple does look great  :D

poly would def be great! i'd like to do it eventually especially in some more cool coating colors. it may be down the line.



also the goal of the smaller 30-40 unit quantity is to let myself do stuff more frequently. QC/final assembly/packing/shipping takes a while as I've learned with hbcp and I'd like to not have so many boards to do at one time.
Title: Re: [IC] hiney tkl one
Post by: dom on Thu, 20 February 2020, 01:44:13
I really like it! :) Congrats!

The USB-C placement is also interesting (like!), and agree, the poly would be amazing.
Title: Re: [IC] hiney tkl one
Post by: wouldworks on Thu, 20 February 2020, 01:47:48
I love hineybush keyboards and keyboard accessories
Title: Re: [IC] hiney tkl one
Post by: SirShakes on Thu, 20 February 2020, 01:48:29
NE COD-bois spots avail?
Title: Re: [IC] hiney tkl one
Post by: blacksimon on Thu, 20 February 2020, 01:48:56
This is a nice keyboardn't
Title: Re: [IC] hiney tkl one
Post by: Solotov on Thu, 20 February 2020, 01:49:45
Looks really nice. What is the typing angle?
Title: Re: [IC] hiney tkl one
Post by: rora on Thu, 20 February 2020, 01:52:56
really nice!
Title: Re: [IC] hiney tkl one
Post by: elborak on Thu, 20 February 2020, 02:06:43
Any chance of an h87alps version?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 02:08:33
I really like it! :) Congrats!

The USB-C placement is also interesting (like!), and agree, the poly would be amazing.

Thanks, it's ideally the same as your standard a.87 USB placement, just a bit further out.

Looks really nice. What is the typing angle?

6 degrees

Any chance of an h87alps version?

yeah i could probs swing that.
Title: Re: [IC] hiney tkl one
Post by: Agilr on Thu, 20 February 2020, 02:13:58
yes
Title: Re: [IC] hiney tkl one
Post by: LightningXI on Thu, 20 February 2020, 02:23:21
Ooooh that purple...
Title: Re: [IC] hiney tkl one
Post by: Kokaloo on Thu, 20 February 2020, 02:36:16
neat
Title: Re: [IC] hiney tkl one
Post by: austinliu on Thu, 20 February 2020, 02:41:19
nice


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: superdoedoe on Thu, 20 February 2020, 02:45:44
Corsa-esque sides

Nut
Title: Re: [IC] hiney tkl one
Post by: Scottw on Thu, 20 February 2020, 02:54:18
I am into the gold.

Any guess as to when it may be available?
Title: Re: [IC] hiney tkl one
Post by: nickaster1 on Thu, 20 February 2020, 03:00:04
O lawd that purple/lilac/violet...
Title: Re: [IC] hiney tkl one
Post by: Applet on Thu, 20 February 2020, 03:08:26
Oh, wow! Best of luck, I'm sure it will be great :D
Title: Re: [IC] hiney tkl one
Post by: Handke on Thu, 20 February 2020, 03:16:42
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.
Title: Re: [IC] hiney tkl one
Post by: Midori on Thu, 20 February 2020, 03:46:41
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.

Don't worry, there will be a PCB
Title: Re: [IC] hiney tkl one
Post by: sirieous on Thu, 20 February 2020, 03:55:29
That purple is really pretty and might be the go. GL with the private buy and I hope I can get in on the public raffle.
Title: Re: [IC] hiney tkl one
Post by: d.caminero on Thu, 20 February 2020, 03:59:30

Any chance of an h87alps version?

yeah i could probs swing that.

If you make an alps version I will keep a close look at this :) Been a long time looking for an ALPS TKL
Title: Re: [IC] hiney tkl one
Post by: MyManMart on Thu, 20 February 2020, 04:54:57
I'm about it.
Title: Re: [IC] hiney tkl one
Post by: Nigolski on Thu, 20 February 2020, 05:03:47
i'm sold
Title: Re: [IC] hiney tkl one
Post by: hkiri on Thu, 20 February 2020, 06:20:39
Super nice!
Title: Re: [IC] hiney tkl one
Post by: Smoff on Thu, 20 February 2020, 06:59:27
(https://i.pinimg.com/originals/52/77/8b/52778bfdaf88d9364f9577a5e9483421.png)
Title: Re: [IC] hiney tkl one
Post by: o3okevin on Thu, 20 February 2020, 07:05:55
All is right in the world
Title: Re: [IC] hiney tkl one
Post by: pikku-allu on Thu, 20 February 2020, 07:10:57
Ooooo baby
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Thu, 20 February 2020, 07:20:34
Lemme get a drab green hiney man
Title: Re: [IC] hiney tkl one
Post by: mta on Thu, 20 February 2020, 08:18:57
Wtb
Title: Re: [IC] hiney tkl one
Post by: trg1234 on Thu, 20 February 2020, 08:29:16
holy fuc that lilac sjsjsjsjwnsbzus
Title: Re: [IC] hiney tkl one
Post by: 8six753o9 on Thu, 20 February 2020, 09:02:55
(https://i.kym-cdn.com/photos/images/original/000/264/241/9e9.gif)
Title: Re: [IC] hiney tkl one
Post by: FLawLesS on Thu, 20 February 2020, 09:35:50
HOLY MOLY.... ESKEEERRIIIT.  :D
Title: Re: [IC] hiney tkl one
Post by: fabijolo on Thu, 20 February 2020, 09:38:24
Looking good :thumb:
Title: Re: [IC] hiney tkl one
Post by: VipermanGT2 on Thu, 20 February 2020, 09:54:42
LEMME TOUCH DAT HINEY!!!!
Title: Re: [IC] hiney tkl one
Post by: SolidCactus on Thu, 20 February 2020, 10:19:26
Purple looks incredible! Winkey please  :thumb:
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Thu, 20 February 2020, 10:24:01
Definitely a nice looking hiney
Title: Re: [IC] hiney tkl one
Post by: ilemondrop on Thu, 20 February 2020, 10:43:32
Big fan the colours, it's nice to see some lighter shades of colours.
Title: Re: [IC] hiney tkl one
Post by: travwal on Thu, 20 February 2020, 11:12:26
Only hiney could make me want a tkl
Title: Re: [IC] hiney tkl one
Post by: hicals on Thu, 20 February 2020, 11:26:00
This has to be unlimited.
Title: Re: [IC] hiney tkl one
Post by: steezkeez on Thu, 20 February 2020, 11:35:07
Deffo in on the colors alone
Title: Re: [IC] hiney tkl one
Post by: Dakk1d on Thu, 20 February 2020, 11:41:28
Oof this looks nice... Getting this will be rough :'(
Title: Re: [IC] hiney tkl one
Post by: blitz on Thu, 20 February 2020, 11:42:12
Amazing!
Title: Re: [IC] hiney tkl one
Post by: hkiri on Thu, 20 February 2020, 11:49:53
This will be so hard to get :-[
Title: Re: [IC] hiney tkl one
Post by: ossetepo on Thu, 20 February 2020, 11:50:48
I would buy the hell out of this in the polycarb
Title: Re: [IC] hiney tkl one
Post by: Fuzon on Thu, 20 February 2020, 12:00:50
Typing angle?
Title: Re: [IC] hiney tkl one
Post by: Zach on Thu, 20 February 2020, 12:30:07
Typing angle?
6 degrees
Title: Re: [IC] hiney tkl one
Post by: iboosted on Thu, 20 February 2020, 12:42:56
looks slick. poly pls ;D
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 12:46:52
This has to be unlimited.

no it doesn't


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: xondat on Thu, 20 February 2020, 13:08:34
Definitely a nice looking hiney

All hineys are nice
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Thu, 20 February 2020, 13:12:42
Definitely a nice looking hiney

All hineys are nice
But this one is extra nice!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 13:17:29
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.

tyvm on the nice words! i won't do inox as i haven't messed with it before, ano can be cerakoted or whatever else you'd wanna do anyway.

it will have a pcb for sure
Title: Re: [IC] hiney tkl one
Post by: rkarp on Thu, 20 February 2020, 13:23:47
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.

tyvm on the nice words! i won't do inox as i haven't messed with it before, ano can be cerakoted or whatever else you'd wanna do anyway.

it will have a pcb for sure

Any thoughts on why or why not an F13?  Interested to hear your design process.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 13:29:49
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.

tyvm on the nice words! i won't do inox as i haven't messed with it before, ano can be cerakoted or whatever else you'd wanna do anyway.

it will have a pcb for sure

Any thoughts on why or why not an F13?  Interested to hear your design process.

it's a normal tkl, f13 is neat but not within the scope of this. plus it allows me the possiblity of doing a special edition in the future  :cool:
Title: Re: [IC] hiney tkl one
Post by: rkarp on Thu, 20 February 2020, 13:30:45
Perfect!

What I like of your render:
- no logos
- usb on the right
- small bezel

What I'd like? An inox version, sandblasted and not painted :-D It would be fantastic. Aluminium always need to be treated. Inox doesn't.

Please ask the vendors to give us a case + pcb bundle. That's very important... not having a pcb is a major dealbreaker for international or not expert buyers.

tyvm on the nice words! i won't do inox as i haven't messed with it before, ano can be cerakoted or whatever else you'd wanna do anyway.

it will have a pcb for sure

Any thoughts on why or why not an F13?  Interested to hear your design process.

it's a normal tkl, f13 is neat but not within the scope of this. plus it allows me the possiblity of doing a special edition in the future  :cool:

thanks!
Title: Re: [IC] hiney tkl one
Post by: janglad on Thu, 20 February 2020, 13:35:28
Nice one dad
Title: Re: [IC] hiney tkl one
Post by: JFKroflcopter on Thu, 20 February 2020, 13:38:22

it's a normal tkl, f13 is neat but not within the scope of this. plus it allows me the possiblity of doing a special edition in the future  :cool:

Incoming f13 special edition "hiney tkl one + one"  :cool:
Title: Re: [IC] hiney tkl one
Post by: mutthunt on Thu, 20 February 2020, 13:45:51
Clean look and lovely colours, I can only hope i'll be able to afford this when the GB comes around.

Interested
Title: Re: [IC] hiney tkl one
Post by: tex_live_utility on Thu, 20 February 2020, 14:04:40
What's different between the "standard" Koala plate and yours?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 14:05:56
What's different between the "standard" Koala plate and yours?

just cutouts that i changed up


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: Zacharius on Thu, 20 February 2020, 14:42:00
This is sick


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Thu, 20 February 2020, 15:05:27
wtb name change to "horsa"
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 15:36:30
wtb name change to "horsa"

borsa


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: o3okevin on Thu, 20 February 2020, 15:58:37
will this fit existing h87a + hiney plate (jane v2 version)? got a build laying around
Title: Re: [IC] hiney tkl one
Post by: blitz on Thu, 20 February 2020, 16:10:35
How would one get into the closed group buy?
Title: Re: [IC] hiney tkl one
Post by: elborak on Thu, 20 February 2020, 16:13:56
Any chance of an h87alps version?
yeah i could probs swing that.

I'd be all over this in ALPS.

I've been in the market for a programmable TKL ALPS (as well as something with some heft and aesthetically pleasing).  This looks to be exactly the holy grail I've seeking.

Now who do I have to take out to make sure I get one?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 16:17:21
How would one get into the closed group buy?

be my friend or close collaborator, sadly these positions are already pretty much filled but there will be more to go around.

Any chance of an h87alps version?
yeah i could probs swing that.

I'd be all over this in ALPS.

I've been in the market for a programmable TKL ALPS (as well as something with some heft and aesthetically pleasing).  This looks to be exactly the holy grail I've seeking.

Now who do I have to take out to make sure I get one?

take me out  :-*
Title: Re: [IC] hiney tkl one
Post by: cdhoffmann on Thu, 20 February 2020, 16:21:08
This looks dope AF. That light gold and the purple are both 🔥
Title: Re: [IC] hiney tkl one
Post by: Smoff on Thu, 20 February 2020, 16:23:45
How would one get into the closed group buy?

be my friend or close collaborator, sadly these positions are already pretty much filled but there will be more to go around.
Hello friend :cool:
Title: Re: [IC] hiney tkl one
Post by: jpg2401 on Thu, 20 February 2020, 16:33:38
I love this
Title: Re: [IC] hiney tkl one
Post by: iNViSiBiLiTi on Thu, 20 February 2020, 16:44:24
Purple is going to look great with GMK Taro!  :-*
Title: Re: [IC] hiney tkl one
Post by: snelltrail on Thu, 20 February 2020, 16:51:55
Mmmm soo nice. Hoping it runs in (colored) poly eventually!
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Thu, 20 February 2020, 17:29:10
Wheres the toblerone

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: Zurg Eon on Thu, 20 February 2020, 17:33:47
I'm a fan of those bezels. Will try to get in on this.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 17:49:12
Wheres the toblerone

Sent from my SM-G975F using Tapatalk

at the snack stand
Title: Re: [IC] hiney tkl one
Post by: macclack on Thu, 20 February 2020, 18:03:08
Beauty
Title: Re: [IC] hiney tkl one
Post by: konstantin on Thu, 20 February 2020, 18:06:40
I don't like how high the port sits. I think it'd be better with a daughterboard.
Title: Re: [IC] hiney tkl one
Post by: clik_clak on Thu, 20 February 2020, 18:10:14
Love my HBCP and I'll love having this, too! That purple is absolutely amazing!
Title: Re: [IC] hiney tkl one
Post by: chriszhu on Thu, 20 February 2020, 18:14:13
Beautiful!
Title: Re: [IC] hiney tkl one
Post by: IOVERCALLHISTIOCYTES on Thu, 20 February 2020, 18:19:59
Usually donít have much interest in the limited boards but Iíd go for this. There could be 200 slots and this would still have a ton of people not getting one...
Title: Re: [IC] hiney tkl one
Post by: MoarCoffeePlzzz on Thu, 20 February 2020, 18:36:00
Would love to have one of these :)
Title: Re: [IC] hiney tkl one
Post by: eyedrop on Thu, 20 February 2020, 18:40:33
Purple is lovely.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 18:59:46
I don't like how high the port sits. I think it'd be better with a daughterboard.

no thank u
Title: Re: [IC] hiney tkl one
Post by: Midori on Thu, 20 February 2020, 19:04:09
I don't like how high the port sits. I think it'd be better with a daughterboard.

constexpr tkl one
Title: Re: [IC] hiney tkl one
Post by: mrkantz on Thu, 20 February 2020, 19:20:58
I don't like how high the port sits. I think it'd be better with a daughterboard.
Agreed, but still a very handsome board
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Thu, 20 February 2020, 19:33:36
daughter boards cuck tier tbqh
Title: Re: [IC] hiney tkl one
Post by: Midori on Thu, 20 February 2020, 19:37:08
Quote from:  link=topic=104750.msg2867628#msg2867628 date=1582248058
I don't like how high the port sits. I think it'd be better with a daughterboard.
Agreed, but still a very handsome board

constexpr mrkantz tkl one
Title: Re: [IC] hiney tkl one
Post by: Krelbit on Thu, 20 February 2020, 19:38:12
hiney got a pretty nice ass

he kinda bad

would cop a feel

nice keyboard or whatever
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 19:38:56
hiney got a pretty nice ass

he kinda bad

would cop a feel

nice keyboard or whatever

few know this
Title: Re: [IC] hiney tkl one
Post by: SirShakes on Thu, 20 February 2020, 19:41:32
I don't like how high the port sits. I think it'd be better with a daughterboard.

no
Title: Re: [IC] hiney tkl one
Post by: Rumai on Thu, 20 February 2020, 19:46:13
yesyes
Title: Re: [IC] hiney tkl one
Post by: mrkantz on Thu, 20 February 2020, 19:47:00
Quote from:  link=topic=104750.msg2867628#msg2867628 date=1582248058
I don't like how high the port sits. I think it'd be better with a daughterboard.
Agreed, but still a very handsome board

constexpr mrkantz tkl one
Sounds lame, what if we ditch the daughter board and move the port up?
Title: Re: [IC] hiney tkl one
Post by: megaforce on Thu, 20 February 2020, 19:56:35
oh HELLLLLL yeah
Title: Re: [IC] hiney tkl one
Post by: FunTyme on Thu, 20 February 2020, 20:21:03
I like this
Title: Re: [IC] hiney tkl one
Post by: MeloDet on Thu, 20 February 2020, 20:28:20
The light gold is hot
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Thu, 20 February 2020, 20:36:13
Ending this debate right now.

[attachimg=1]
Title: Re: [IC] hiney tkl one
Post by: blitz on Thu, 20 February 2020, 20:44:34
Ending this debate right now.

(Attachment Link)
Wtf I actually want that


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: BigLeageChew on Thu, 20 February 2020, 21:24:17
Yes WKL tenkeyless! That purple is beautiful.
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Thu, 20 February 2020, 21:25:04
Front height?

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 21:37:20
Front height?

Sent from my SM-G975F using Tapatalk

idk i think like 18 or 19, im not too worried about that measurement however
Title: Re: [IC] hiney tkl one
Post by: eniigma on Thu, 20 February 2020, 23:31:49
pretty. i want

Sent from my SM-G973U using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 20 February 2020, 23:50:47
Front height?

Sent from my SM-G975F using Tapatalk

idk i think like 18 or 19, im not too worried about that measurement however

(https://i.imgur.com/rGxsay9.png)
Title: Re: [IC] hiney tkl one
Post by: jedidood on Fri, 21 February 2020, 02:51:31
I am all for the ploy, make it happen please!
Title: Re: [IC] hiney tkl one
Post by: hicals on Fri, 21 February 2020, 03:15:04
Can I increase the quantity of products?
Title: Re: [IC] hiney tkl one
Post by: MatthewPham on Fri, 21 February 2020, 19:46:28
torx screws


sign me up
Title: Re: [IC] hiney tkl one
Post by: Kinesiologist on Fri, 21 February 2020, 20:17:05
can you kindly please explain what is burger mount?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Fri, 21 February 2020, 20:20:54
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Fri, 21 February 2020, 21:00:56
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk
Edible?

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: Puddsy on Fri, 21 February 2020, 22:00:43
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk
Edible?

Sent from my SM-G975F using Tapatalk

anything is if your insurance is good enough
Title: Re: [IC] hiney tkl one
Post by: bthezebra on Fri, 21 February 2020, 23:56:57
Great work as always Hiney  :thumb:
Title: Re: [IC] hiney tkl one
Post by: dantambok on Sat, 22 February 2020, 01:49:34
Dont mind if i do
Title: Re: [IC] hiney tkl one
Post by: neutralstate on Sat, 22 February 2020, 02:41:49
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?
Title: Re: [IC] hiney tkl one
Post by: loud_asian on Sat, 22 February 2020, 03:06:36
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?

closed buy is like a friend's only groupbuy
Title: Re: [IC] hiney tkl one
Post by: Zilliqa on Sat, 22 February 2020, 03:07:06
hiney pls I want this. Love the machining detail on the front edge, and that purple :eek:
Title: Re: [IC] hiney tkl one
Post by: Dafraz117 on Sat, 22 February 2020, 07:22:26
I really want this


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: tonny950111 on Sat, 22 February 2020, 08:21:56
Questions how to join the private GB ? Do you have a Discord channel ?
Title: Re: [IC] hiney tkl one
Post by: Flexerman on Sat, 22 February 2020, 08:45:46
very purty, love the colours.  :thumb:
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 11:46:06
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?

Questions how to join the private GB ? Do you have a Discord channel ?

yea it's already pretty much been decided soz
Title: Re: [IC] hiney tkl one
Post by: frostfiree on Sat, 22 February 2020, 11:51:50
That light purple is beautiful.
Title: Re: [IC] hiney tkl one
Post by: blitz on Sat, 22 February 2020, 11:56:25
full run ETA, will do a proto run then then a public raffle/fcfs/vickrey sort of thing with like 30-40 units, no more than that likely. I do plan on doing multiple runs - goal is to do smaller but more frequent runs/buys, so drop new colors/etc every few months

Does this mean future GBs will be open to the public?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 11:58:18
full run ETA, will do a proto run then then a public raffle/fcfs/vickrey sort of thing with like 30-40 units, no more than that likely. I do plan on doing multiple runs - goal is to do smaller but more frequent runs/buys, so drop new colors/etc every few months

Does this mean future GBs will be open to the public?

yes, after proto run i will have public buys
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 13:52:21
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)

the anti flipper flip club official keyboard
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Sat, 22 February 2020, 14:02:23
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard
Hahaha love that!

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: rkarp on Sat, 22 February 2020, 14:13:14
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 14:16:25
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....

so manufacturing isnt the problem. it's how much time i am willing to take out of my day (free time otherwise, usually, or time i spend designing stuff like this for myself and others) to QC, ship, deal with issues, etc.

it's easier and gives me more peace of mind to not deal with larger scale orders at once, because i like to live my life as well
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sat, 22 February 2020, 14:45:40
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards. At least not as the sole QCers. And most designers don't make livable profits (or sometimes even profits) off their GBs. It's usually done in their free time and for the hobby.
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Sat, 22 February 2020, 14:47:23
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 14:59:20
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk

it's also important for me (or any vendor) to check them, as I do. if you'd like to do stuff differently I implore you to do it yourself
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sat, 22 February 2020, 15:01:16
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk
"At least not as the sole QCers."

Calm down.
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Sat, 22 February 2020, 15:04:11
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Sat, 22 February 2020, 15:05:08
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 15:07:52
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.
Title: Re: [IC] hiney tkl one
Post by: Rumblehotep on Sat, 22 February 2020, 15:10:48
Oh boy thatís some kinda purple.

I always wonder, do designers have a go-to keyset in mind when drawing these up?
Title: Re: [IC] hiney tkl one
Post by: lolafineday on Sat, 22 February 2020, 15:12:23
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.
Yeah this hobby is very keen on perfection, which the factories are not used to as they produce things more for functionality versus aesthetics.

Sent from my SM-G975F using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 15:16:04
Oh boy thatís some kinda purple.

I always wonder, do designers have a go-to keyset in mind when drawing these up?

not exactly but i prefer the classic/simple sets so that's probably what i end up designing for subconciously, lol

China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.
Yeah this hobby is very keen on perfection, which the factories are not used to as they produce things more for functionality versus aesthetics.

Sent from my SM-G975F using Tapatalk

yes
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sat, 22 February 2020, 16:38:01


Oh boy thatís some kinda purple.

I always wonder, do designers have a go-to keyset in mind when drawing these up?

not exactly but i prefer the classic/simple sets so that's probably what i end up designing for subconciously, lol


Yeah. I'd def take that pale gold and throw on some vint blacks and some old cherry caps I harvested. Def a very traditional layout. Love it.
Title: Re: [IC] hiney tkl one
Post by: ACF101015 on Sat, 22 February 2020, 16:51:23
+1 for the polycarb. If not the first run, then maybe in future runs?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 22 February 2020, 17:25:22
+1 for the polycarb. If not the first run, then maybe in future runs?

eventually potentially
Title: Re: [IC] hiney tkl one
Post by: dantambok on Sat, 22 February 2020, 23:07:05
+1 for the polycarb. If not the first run, then maybe in future runs?

eventually potentially

oh yes baby
Title: Re: [IC] hiney tkl one
Post by: heycheeeno on Sun, 23 February 2020, 01:05:05
Can't wait to split backspace this bad boy as well  :)
Title: Re: [IC] hiney tkl one
Post by: tomu on Sun, 23 February 2020, 01:07:08
Can't wait to split backspace this bad boy as well  :)
cursed

Sent from my SM-G965U using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: J3ff_Leopard on Sun, 23 February 2020, 01:47:43
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

If this isn't in the initial proto run I'm going to be disappointed.
Title: Re: [IC] hiney tkl one
Post by: mode on Sun, 23 February 2020, 02:07:02
Interested if there's ISO alps support, even if it doesn't come with a plate and you could provide a .dxf for me to modify and I get it made myself. I'd prefer winkeys as I'm a mac user and option keys are necessary.

I'm especially interested if there are strong colour options, I like the purple.

I'll be even more especially interested if you could tie this together with an alps keycap set. I have a DCS Yuri set coming, but I have everything waiting for that already. Wern't you considering running one a while ago?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 23 February 2020, 11:23:15
Interested if there's ISO alps support, even if it doesn't come with a plate and you could provide a .dxf for me to modify and I get it made myself. I'd prefer winkeys as I'm a mac user and option keys are necessary.

I'm especially interested if there are strong colour options, I like the purple.

I'll be even more especially interested if you could tie this together with an alps keycap set. I have a DCS Yuri set coming, but I have everything waiting for that already. Wern't you considering running one a while ago?

ISO alps should be on the PCB. Platewise I would likely only offer a WKL ISO layout in FR4 since i'm sure it would be a very low quantity order wise. I do plan on getting the DCS WoB going, I'll be working with a vendor on that this spring/summer!
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sun, 23 February 2020, 11:30:24


Interested if there's ISO alps support, even if it doesn't come with a plate and you could provide a .dxf for me to modify and I get it made myself. I'd prefer winkeys as I'm a mac user and option keys are necessary.

I'm especially interested if there are strong colour options, I like the purple.

I'll be even more especially interested if you could tie this together with an alps keycap set. I have a DCS Yuri set coming, but I have everything waiting for that already. Wern't you considering running one a while ago?

ISO alps should be on the PCB. Platewise I would likely only offer a WKL ISO layout in FR4 since i'm sure it would be a very low quantity order wise. I do plan on getting the DCS WoB going, I'll be working with a vendor on that this spring/summer!

Was about to get in on that DCS Red Alert, but WoB sounds much better.
Title: Re: [IC] hiney tkl one
Post by: vector88 on Sun, 23 February 2020, 16:14:53
+1 for the polycarb. If not the first run, then maybe in future runs?

eventually potentially

what is difference between polycarb and acrylic? thanks for explanation, I never understood it.
Title: Re: [IC] hiney tkl one
Post by: funderburker on Sun, 23 February 2020, 16:22:01
+1 for the polycarb. If not the first run, then maybe in future runs?

eventually potentially

what is difference between polycarb and acrylic? thanks for explanation, I never understood it.

They're two different materials with different properties and dense-ness. Polycarbonate is kinda soft and flexible while acrylic is more fragile. People mix them up because they only notice that it's a translucent material usually...
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sun, 23 February 2020, 18:08:30
Yeah. Turns out both can be frosted or clear. Or dyed certain colors.
Title: Re: [IC] hiney tkl one
Post by: 1391401 on Sun, 23 February 2020, 19:30:41
Im interested as I want to build a TKL but sad to see it'll be limited to 30-40 units.  Anyway good luck!
Title: Re: [IC] hiney tkl one
Post by: proestever on Sun, 23 February 2020, 19:41:35
Man, I've been wanting a silver TKL just like this since I discovered this forum
Title: Re: [IC] hiney tkl one
Post by: TinyShinyCrumb on Sun, 23 February 2020, 21:52:45
That purple is gorgeous, totally interested in this.

Would also be cool to see it in a dark teal... <3
Title: Re: [IC] hiney tkl one
Post by: sethori on Sun, 23 February 2020, 22:16:26
I really like the purple! Maybe a few different pastel type case colors?

I will be watching this one closely!
Title: Re: [IC] hiney tkl one
Post by: Woahder on Sun, 23 February 2020, 23:00:45
reaaaally interested in the purple
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 24 February 2020, 00:21:12
Was about to get in on that DCS Red Alert

Is there a group buy I'm unaware of for ALPS DCS? Will be getting WoB either way.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 24 February 2020, 01:25:15
Was about to get in on that DCS Red Alert

Is there a group buy I'm unaware of for ALPS DCS? Will be getting WoB either way.

https://geekhack.org/index.php?topic=102206.0
Title: Re: [IC] hiney tkl one
Post by: frob on Mon, 24 February 2020, 04:36:28
Does it support ISO?
If so, then I'm interested.
Title: Re: [IC] hiney tkl one
Post by: ch3wable on Mon, 24 February 2020, 05:34:23
Very keen for the purple. Just got gmk vaporwave and it seems like the perfect match .
Title: Re: [IC] hiney tkl one
Post by: chits on Mon, 24 February 2020, 08:28:06
Sweet board. GL w GB, HB.
Title: Re: [IC] hiney tkl one
Post by: mycarrotbroke on Mon, 24 February 2020, 09:12:48
Ohhh what a beautiful board. That purple is really something unique! Count me in!


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: dubious on Mon, 24 February 2020, 11:56:22
looks p good
Title: Re: [IC] hiney tkl one
Post by: cog1to on Mon, 24 February 2020, 12:09:22
Looks so nice. A good TKL is always good
Title: Re: [IC] hiney tkl one
Post by: synmuffin on Mon, 24 February 2020, 12:43:03
Looks really nice! I like the light gold.
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Mon, 24 February 2020, 13:50:01
Think I might post about OD green here daily.

Let's go butt man.
Title: Re: [IC] hiney tkl one
Post by: abdul on Mon, 24 February 2020, 14:05:12
cute design I dig it a lot
Title: Re: [IC] hiney tkl one
Post by: jayoliver on Tue, 25 February 2020, 16:29:27
excited to see the upcoming updates as this progresses
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Tue, 25 February 2020, 17:52:02
[attachimg=1]
Title: Re: [IC] hiney tkl one
Post by: jonckr on Thu, 27 February 2020, 00:10:17
The purple looks amazing   ;D
Title: Re: [IC] hiney tkl one
Post by: PoohGom on Thu, 27 February 2020, 01:18:18
The purple is the shade of purple I've wanted forever... I hope I can get into this GB
Title: Re: [IC] hiney tkl one
Post by: varj17 on Thu, 27 February 2020, 15:08:35
I need this.
Title: Re: [IC] hiney tkl one
Post by: treeleaf64 on Thu, 27 February 2020, 16:21:06
A very lovely board, I absolutely LOVE that purple!! By any chance, can you tell me where you got that color from? :D
Title: Re: [IC] hiney tkl one
Post by: Kristof on Thu, 27 February 2020, 16:28:56
Any chance for a normal human like me to join these first closed buys or just "selected few"?
Title: Re: [IC] hiney tkl one
Post by: Phrillis on Thu, 27 February 2020, 16:41:57
any chance of an f13 version in the future?
Title: Re: [IC] hiney tkl one
Post by: Charlesxvi on Thu, 27 February 2020, 17:07:57
Looks amazing Hiney, can't wait to see the prototype!

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: Snapple on Thu, 27 February 2020, 17:21:13
Can be configurable with QMK?
Title: Re: [IC] hiney tkl one
Post by: Charlesxvi on Thu, 27 February 2020, 17:24:55
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: clik_clak on Thu, 27 February 2020, 18:22:43
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

It's in the OP...Uses his own H87a, with a USB C port.  It already has QMK support.

No reason to reinvent the wheel when he's already created 2 different TKL pcb's.
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Thu, 27 February 2020, 18:58:50
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

It's in the OP...Uses his own H87a, with a USB C port.  It already has QMK support.

No reason to reinvent the wheel when he's already created 2 different TKL pcb's.

Haha, right? my head spun when I read that he might use someone else's PCB.
Title: Re: [IC] hiney tkl one
Post by: Charlesxvi on Thu, 27 February 2020, 19:14:51
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

It's in the OP...Uses his own H87a, with a USB C port.  It already has QMK support.

No reason to reinvent the wheel when he's already created 2 different TKL pcb's.

Haha, right? my head spun when I read that he might use someone else's PCB.
I mean, fair enough. I just can't read I guess.

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Thu, 27 February 2020, 19:18:25
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

It's in the OP...Uses his own H87a, with a USB C port.  It already has QMK support.

No reason to reinvent the wheel when he's already created 2 different TKL pcb's.

Haha, right? my head spun when I read that he might use someone else's PCB.
I mean, fair enough. I just can't read I guess.

Sent from my Pixel 3 XL using Tapatalk

Haha, might just not be in the know, but Hiney is like world renowned for making PCBs for other cases. I guess he could pay someone to make one for his own, but it'd be odd, haha.
Title: Re: [IC] hiney tkl one
Post by: Charlesxvi on Thu, 27 February 2020, 20:50:12
Can be configurable with QMK?
It should be, hiney's stuff usually is. Unless he goes with VIA but then again I don't know if he's designing the PCB or if he'll have someone else do it like wilba.

Sent from my Pixel 3 XL using Tapatalk

It's in the OP...Uses his own H87a, with a USB C port.  It already has QMK support.

No reason to reinvent the wheel when he's already created 2 different TKL pcb's.

Haha, right? my head spun when I read that he might use someone else's PCB.
I mean, fair enough. I just can't read I guess.

Sent from my Pixel 3 XL using Tapatalk

Haha, might just not be in the know, but Hiney is like world renowned for making PCBs for other cases. I guess he could pay someone to make one for his own, but it'd be odd, haha.
No, I know Hiney makes his own pcbs I just didn't read the post well enough. :/ After I sent it I was like, "huh, Hiney makes his own pcbs I don't know why I said that."

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Fri, 28 February 2020, 12:25:14
(Attachment Link)

:eyeshake:
Title: Re: [IC] hiney tkl one
Post by: FluffyUnicronz on Sat, 29 February 2020, 11:01:12
I am insanely curious how that gold will turn out.  Without different lighting its looking more like a silver to me.
Title: Re: [IC] hiney tkl one
Post by: LightningXI on Sat, 29 February 2020, 23:05:28
I want that lilac Mr hiney
Title: Re: [IC] hiney tkl one
Post by: alanskiii on Sat, 29 February 2020, 23:10:17
Pretty cute purple
And yes please give


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: KMPLSV on Sun, 01 March 2020, 08:32:02
i definitely want that purple!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 01 March 2020, 11:22:10
Any chance for a normal human like me to join these first closed buys or just "selected few"?

private buy is a proto run for friends and close associates only. minimizes stress and risk and opens up more public slots later on.

Does it support ISO?
If so, then I'm interested.

yeah

A very lovely board, I absolutely LOVE that purple!! By any chance, can you tell me where you got that color from? :D

it's a RAL code, i can't remember the exact one but I'll find my deck and share it later

any chance of an f13 version in the future?

oh yea. hiney tkl one se

Can be configurable with QMK?

yea. others incorrectly said if it's VIA compatible then it's not QMK compatible - this is not true as VIA runs on top of QMK. you can flash a non-VIA QMK hex if you like but it won't really make a difference
Title: Re: [IC] hiney tkl one
Post by: Sifo on Sun, 01 March 2020, 11:25:35
i love u hiney
Title: Re: [IC] hiney tkl one
Post by: dangboy on Mon, 02 March 2020, 02:05:46
hey its me, ur close associate
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 02 March 2020, 14:40:58
ordering my protos this evening
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Mon, 02 March 2020, 14:53:51
ordering my protos this evening

Awesome! Definitely excited to see them. Right now this board is number one on my radar, even if I won't have a chance until the next open GB.
Title: Re: [IC] hiney tkl one
Post by: EnthusiastDude on Mon, 02 March 2020, 15:08:32
this looks really promising, I like it!

+1 for iso alps, I am fine with an fr4 plate :)
Title: Re: [IC] hiney tkl one
Post by: jayoliver on Tue, 03 March 2020, 11:00:06
Iím loving the design and would want this as my first ever build. Definitely will keep my eye on this one if the GB does happen in the future.
Title: Re: [IC] hiney tkl one
Post by: Bl4ck on Tue, 03 March 2020, 15:52:17
Did you completely rule out a deep black version?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 03 March 2020, 16:18:31
Did you completely rule out a deep black version?

i haven't completely ruled anything out. or in.
Title: Re: [IC] hiney tkl one
Post by: prettydouchebag on Tue, 03 March 2020, 18:08:26
This is an instant classic! Can't wait to see the protos!!
Title: Re: [IC] hiney tkl one
Post by: Zambumon on Tue, 03 March 2020, 20:31:22
I'm going to need some more context to understand the dimensions of this board, otherwise the renders are a little bit too empty for me.
Title: Re: [IC] hiney tkl one
Post by: batmanwcm on Tue, 03 March 2020, 20:58:05
That purple is gorgeous.  Just in time for the GMK Taro group buy.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Wed, 04 March 2020, 19:50:09
I'm going to need some more context to understand the dimensions of this board, otherwise the renders are a little bit too empty for me.

it's larger than a fullsize but smaller than a 65%

also, ordered PCB prototypes
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Wed, 04 March 2020, 20:10:45
I'm going to need some more context to understand the dimensions of this board, otherwise the renders are a little bit too empty for me.

it's larger than a fullsize but smaller than a 65%

also, ordered PCB prototypes

lol, what a response.
Title: Re: [IC] hiney tkl one
Post by: elborak on Wed, 04 March 2020, 23:00:11
it's larger than a fullsize but smaller than a 65%

Clearly inspired by M. C. Escher.
Title: Re: [IC] hiney tkl one
Post by: WiNloSt on Fri, 06 March 2020, 06:22:55
Any chance that the PCB is going support being solder on the back of the board like TX87? I've run out of my PCBs and one of my cases needs the USB port the be under the PCB.
Title: Re: [IC] hiney tkl one
Post by: Zylkan on Fri, 06 March 2020, 08:28:51
What do you mean "fixed cable" does that even make sense in custom keeb world ?
Title: Re: [IC] hiney tkl one
Post by: Velvet_Crowe on Fri, 06 March 2020, 09:07:38
What do you mean "fixed cable" does that even make sense in custom keeb world ?
i think youre in the wrong thread
Title: Re: [IC] hiney tkl one
Post by: Zylkan on Fri, 06 March 2020, 09:34:55
Indeed I am...

Please disregard my post, sorry about that
Title: Re: [IC] hiney tkl one
Post by: hineybush on Fri, 06 March 2020, 12:55:45
Any chance that the PCB is going support being solder on the back of the board like TX87? I've run out of my PCBs and one of my cases needs the USB port the be under the PCB.

no, USB Type C only
Title: Re: [IC] hiney tkl one
Post by: vaughno on Sat, 07 March 2020, 16:32:40
i like
Title: Re: [IC] hiney tkl one
Post by: ramnes on Sun, 08 March 2020, 04:58:06
Yes please
Title: Re: [IC] hiney tkl one
Post by: WiNloSt on Mon, 09 March 2020, 04:01:08
Any chance that the PCB is going support being solder on the back of the board like TX87? I've run out of my PCBs and one of my cases needs the USB port the be under the PCB.

no, USB Type C only

I know it's type-C, but I assume the PCB won't support soldering the USB port on the other side doesn't it? Because h87a doesn't seem to support that.
Title: Re: [IC] hiney tkl one
Post by: funderburker on Mon, 09 March 2020, 07:16:36
Any chance that the PCB is going support being solder on the back of the board like TX87? I've run out of my PCBs and one of my cases needs the USB port the be under the PCB.

no, USB Type C only

I know it's type-C, but I assume the PCB won't support soldering the USB port on the other side doesn't it? Because h87a doesn't seem to support that.

I haven't seen a PCB that would offer USB connector on both sides of it. Which board needs it the other way around?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 09 March 2020, 10:22:33
Any chance that the PCB is going support being solder on the back of the board like TX87? I've run out of my PCBs and one of my cases needs the USB port the be under the PCB.

no, USB Type C only

I know it's type-C, but I assume the PCB won't support soldering the USB port on the other side doesn't it? Because h87a doesn't seem to support that.

I haven't seen a PCB that would offer USB connector on both sides of it. Which board needs it the other way around?

yup and besides this isn't designed to be a fit for older cases, as the normal h87a is. the Type C port is wider and wouldn't work with cases that have a tight fitment
Title: Re: [IC] hiney tkl one
Post by: of_sam on Fri, 13 March 2020, 13:25:21
I'm actually simping over this one.
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Fri, 13 March 2020, 17:08:17
Interested in PC and Purple :)
Title: Re: [IC] hiney tkl one
Post by: L8T on Mon, 16 March 2020, 19:19:17
This looks so good! Is the SS bottom mirror polished btw? Silver PVD would be kinda cool too.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 16 March 2020, 20:48:30
This looks so good! Is the SS bottom mirror polished btw? Silver PVD would be kinda cool too.

sandblasted. ive considered PVD but i have nothing set in stone yet. i really dont like mirror finish stuff so i highly doubt any of these will have a polished or mirrored finish.
Title: Re: [IC] hiney tkl one
Post by: Solotov on Mon, 16 March 2020, 22:16:29
+1 for the sandblasted. I found that mirror polish looks amazing at first, but it gets boring over time.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 16 March 2020, 22:21:21
+1 for the sandblasted. I found that mirror polish looks amazing at first, but it gets boring over time.

yea it's ugly af
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Mon, 16 March 2020, 22:26:00
+1 for the sandblasted. I found that mirror polish looks amazing at first, but it gets boring over time.

yea it's ugly af
Lol. The man speaks truth
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Tue, 17 March 2020, 15:36:29
Will this support split backspace?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 17 March 2020, 16:09:18
Will this support split backspace?

it will although i do not condone such actions
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Tue, 17 March 2020, 16:59:30
Will this support split backspace?

it will although i do not condone such actions

Thank you for allowing such treacherous options for scum like me :)

100% in for polycarb!!!
Title: Re: [IC] hiney tkl one
Post by: pr0ximity on Tue, 17 March 2020, 17:40:04
This looks like a cool keyboard
Title: Re: [IC] hiney tkl one
Post by: toxic_munkii on Tue, 17 March 2020, 18:19:39
Looks amazing.. That purple is the bomb!
Title: Re: [IC] hiney tkl one
Post by: notnotnathan on Wed, 18 March 2020, 23:12:38
how will i be able to buy this?
Title: Re: [IC] hiney tkl one
Post by: bigapplepietart on Thu, 19 March 2020, 00:49:39
nice.

iím in.
Title: Re: [IC] hiney tkl one
Post by: Magas on Sat, 28 March 2020, 11:07:11
Yo Hiney!

Color me interested dude! When you streaming next so I can stop by and check you out!?

~Magical Magas
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 28 March 2020, 11:35:53
Yo Hiney!

Color me interested dude! When you streaming next so I can stop by and check you out!?

~Magical Magas

probably today actually, you can join my discord and see the messages when I do: discord.hiney.cc
Title: Re: [IC] hiney tkl one
Post by: gaunt on Sun, 29 March 2020, 08:28:00
Is Alps confirmed then, considering people have started talking about Alps iso? If so consider me interested.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 29 March 2020, 11:59:55
Is Alps confirmed then, considering people have started talking about Alps iso? If so consider me interested.

Alps iso?

I'll probably provide a fixed-layout WKL/ansi FR4 alps plate.
Title: Re: [IC] hiney tkl one
Post by: mode on Sun, 29 March 2020, 13:14:58
Is Alps confirmed then, considering people have started talking about Alps iso? If so consider me interested.

Alps iso?

I'll probably provide a fixed-layout WKL/ansi FR4 alps plate.

I'll happily do the CAD for any ISO plates people may be after and post .dxf files so they can get them fabricated, as long as there's a run of h87 ALPS PCBs it'll work with :)
Title: Re: [IC] hiney tkl one
Post by: bigboss on Sun, 29 March 2020, 15:20:44
reserved
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Sun, 29 March 2020, 16:53:26
reserved
Double reserved.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 29 March 2020, 19:38:17
Is Alps confirmed then, considering people have started talking about Alps iso? If so consider me interested.

Alps iso?

I'll probably provide a fixed-layout WKL/ansi FR4 alps plate.

I'll happily do the CAD for any ISO plates people may be after and post .dxf files so they can get them fabricated, as long as there's a run of h87 ALPS PCBs it'll work with :)

ill release the files don't worry
Title: Re: [IC] hiney tkl one
Post by: hellokevin on Mon, 30 March 2020, 10:29:36
Dropping by to give my love to purple.
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 30 March 2020, 11:27:18
Dropping by to give my love to purple.

Purple is the best.
Title: Re: [IC] hiney tkl one
Post by: cdhoffmann on Mon, 30 March 2020, 13:32:53
Dropping by to give my love to purple.

Purple is the best.
Having a very hard time deciding between the light gold and purple. They are both straight


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: bigapplepietart on Mon, 30 March 2020, 13:57:19
All in for silver or black WKL
Title: Re: [IC] hiney tkl one
Post by: Pachriksu on Mon, 30 March 2020, 14:05:54
nice board

interesting that there's no branding/icons

good luck with this, looks clean :)
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 30 March 2020, 14:16:34
interesting that there's no branding/icons

I really like that about it, it's elegant and clean.
Title: Re: [IC] hiney tkl one
Post by: hughtrue on Wed, 01 April 2020, 09:58:37
Take my money.

Sent from my Pixel 4 using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: OscarPapa on Thu, 02 April 2020, 02:28:21
Hopefully silver wkl is available soon. Would buy 100%.
Title: Re: [IC] hiney tkl one
Post by: Dumble_Hub on Thu, 02 April 2020, 23:35:42
Definitely intrested, especially if its compatible with H87alps!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 02 April 2020, 23:59:24
Definitely intrested, especially if its compatible with H87alps!

this pcb will have alps + mx
Title: Re: [IC] hiney tkl one
Post by: Kallus on Sat, 04 April 2020, 11:07:35
Show Image
(https://cdn.discordapp.com/attachments/312287977151660042/680858930083135734/image0.png)


the anti flipper flip club official keyboard

Yo i love that blue color in the back.
Title: Re: [IC] hiney tkl one
Post by: ferociousfox on Sat, 04 April 2020, 14:47:12
Is this WKL only?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 04 April 2020, 17:56:47
Is this WKL only?

nop
Title: Re: [IC] hiney tkl one
Post by: kbye on Sun, 05 April 2020, 04:48:45
Interested in WK, I only like boring colors like silver black or navy though, but looking forward nonetheless  :cool:
Title: Re: [IC] hiney tkl one
Post by: Artemie on Sun, 05 April 2020, 10:36:50
ne cf plate avail or jace plates will fit sir
Title: Re: [IC] hiney tkl one
Post by: BoatsOnWater on Sun, 05 April 2020, 10:43:05
Loving the violet one but the polycarb i think is just stunning with the design
Title: Re: [IC] hiney tkl one
Post by: LightningXI on Sun, 05 April 2020, 11:34:12
ne cf plate avail or jace plates will fit sir
There's no f13
Title: Re: [IC] hiney tkl one
Post by: Artemie on Sun, 05 April 2020, 11:35:16
ne cf plate avail or jace plates will fit sir
There's no f13
I own a dremel.
Title: Re: [IC] hiney tkl one
Post by: LightningXI on Sun, 05 April 2020, 11:40:06
ne cf plate avail or jace plates will fit sir
There's no f13
I own a dremel.
nice :hanry:
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 05 April 2020, 12:06:02
ne cf plate avail or jace plates will fit sir
There's no f13

(https://cdn.discordapp.com/attachments/569729511269335052/691543559454851102/image0.jpg)

:flushed:
Title: Re: [IC] hiney tkl one
Post by: delet_d on Sun, 05 April 2020, 13:34:45
Would love to see a f13 option, if possible
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 05 April 2020, 14:00:29
Would love to see a f13 option, if possible

tkl one hse (hiney special edition) will occur as part of the rotation of hiney products
Title: Re: [IC] hiney tkl one
Post by: fleeceman on Sun, 05 April 2020, 15:23:13
Looks interesting. Will there be any branding on the weight?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 05 April 2020, 15:44:19
Looks interesting. Will there be any branding on the weight?

not externally
Title: Re: [IC] hiney tkl one
Post by: ecbob on Sun, 05 April 2020, 16:29:49
lilac board is a beaut.

The proto will be wkl but will the drop have wk?
Title: Re: [IC] hiney tkl one
Post by: kbye on Sun, 05 April 2020, 16:34:01
wow didn't realize so many ppl were into f13
Title: Re: [IC] hiney tkl one
Post by: delet_d on Sun, 05 April 2020, 16:46:47
wow didn't realize so many ppl were into f13

For me, it's because it's a unique key that most tkls don't have. Just a little something extra.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sun, 05 April 2020, 18:33:05
lilac board is a beaut.

The proto will be wkl but will the drop have wk?

yes
Title: Re: [IC] hiney tkl one
Post by: vncsnty on Sun, 05 April 2020, 19:24:07
Holy molly! damn covid19 delaying this! In for the light gold..
Title: Re: [IC] hiney tkl one
Post by: jwilthethrill on Tue, 07 April 2020, 01:57:43
Please a WKL TKL POLY board with this design... Iíd cry tears of joy
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 07 April 2020, 10:57:19
Please a WKL TKL POLY board with this design... Iíd cry tears of joy

poly could def occur
Title: Re: [IC] hiney tkl one
Post by: zakatak on Tue, 07 April 2020, 10:59:08
looks super nice  what price are you aiming for

Sent from my POCOPHONE F1 using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: Vadurr on Tue, 07 April 2020, 12:11:37
Please a WKL TKL POLY board with this design... Iíd cry tears of joy

poly could def occur

:drooooooooolsssss:
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 07 April 2020, 12:20:13
looks super nice  what price are you aiming for

Sent from my POCOPHONE F1 using Tapatalk

not 100% sure atm. likely something in the ballpark of $450-550. It may be on the higher side due to 2-piece weight and other considerations. I could probs do a one-piece weight "economy version" eventually as well.
Title: Re: [IC] hiney tkl one
Post by: L8T on Tue, 07 April 2020, 12:46:53
Why no gooskets? /s
Title: Re: [IC] hiney tkl one
Post by: gateronyellowcult on Thu, 16 April 2020, 13:56:55
I need this with an option for ALPS support and ALPS stabilizers compatible! I would immediately place an order if supported!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 16 April 2020, 20:48:04
I need this with an option for ALPS support and ALPS stabilizers compatible! I would immediately place an order if supported!

yusssss. can do. working on a WKL alps plate that can support both Alps stab + MX, PCB mount stab.
Title: Re: [IC] hiney tkl one
Post by: TheInverseKey on Thu, 16 April 2020, 22:42:32
I need this with an option for ALPS support and ALPS stabilizers compatible! I would immediately place an order if supported!

yusssss. can do. working on a WKL alps plate that can support both Alps stab + MX, PCB mount stab.

Amen this has been needed for a long time. Thanks for keeping in mind other stab types and innovating.
Title: Re: [IC] hiney tkl one
Post by: mode on Fri, 17 April 2020, 02:37:47
Nice to see a fair bit of alps interest from others.

I've obtained some nice pristine SKCL Greens which I hope to use in one of these, the purple with WoB DCS would be quite a combo.
Title: Re: [IC] hiney tkl one
Post by: Onnimar on Fri, 17 April 2020, 03:14:03
Looks really good, I've been looking for a TKL to build for a while now. Can't wait.
Title: Re: [IC] hiney tkl one
Post by: iammeuru on Fri, 17 April 2020, 04:03:55
Nice to see a fair bit of alps interest from others.

No joke! I can't wait for this... Also, loving everything this dude makes... Classy stuff from a classy guy. I need a Hiney TKL to match the HBCP action going on in my office! A Hiney keeb at every computer is necessary :p

Also... In ALPS!
Title: Re: [IC] hiney tkl one
Post by: jedidood on Fri, 17 April 2020, 16:44:53
All in for black!
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Fri, 17 April 2020, 23:15:33
ne avail? :eyes:
Title: Re: [IC] hiney tkl one
Post by: sygo_ on Sat, 18 April 2020, 01:21:49
looks neat! Love how clean it is! Do you plan on making a discord, I prefer to keep up to date there
Title: Re: [IC] hiney tkl one
Post by: J3ff_Leopard on Sat, 18 April 2020, 03:10:10
looks neat! Love how clean it is! Do you plan on making a discord, I prefer to keep up to date there

Hiney listed his discord link at the end of his first post.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 27 April 2020, 01:25:18
I will receive the protos this week, perhaps tomorrow
Title: Re: [IC] hiney tkl one
Post by: iammeuru on Mon, 27 April 2020, 02:19:40
Can't wait man, I hope they're awesome!
Title: Re: [IC] hiney tkl one
Post by: mech0nly on Mon, 27 April 2020, 09:25:32
I'm ready! ;)
Title: Re: [IC] hiney tkl one
Post by: Hugs94 on Mon, 27 April 2020, 09:28:11
Amazing looking board. I stopped eating in preparation to buy this.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 27 April 2020, 09:39:28
Amazing looking board. I stopped eating in preparation to buy this.

please eat
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Mon, 27 April 2020, 09:40:26
I have also begun blood sacrifices to the rng god's. My family will have to raise themselves. It's a lengthy process. But they are supportive when i tell them hiney TKL will bring world peace!
Title: Re: [IC] hiney tkl one
Post by: blitz on Mon, 27 April 2020, 09:44:08
I have also begun blood sacrifices to the rng god's. My family will have to raise themselves. It's a lengthy process. But they are supportive when i tell them **honey** TKL will bring world peace!
Hiney is indeed sweet and thicc.
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Mon, 27 April 2020, 09:44:37
I have also begun blood sacrifices to the rng god's. My family will have to raise themselves. It's a lengthy process. But they are supportive when i tell them **honey** TKL will bring world peace!
Hiney is indeed sweet and thicc.

XD, I just fixed it... not sure i should have...
Title: Re: [IC] hiney tkl one
Post by: japanesehorrorwriter on Mon, 27 April 2020, 23:01:32
100% in.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 28 April 2020, 08:44:13
(https://cdn.discordapp.com/attachments/551189586215305221/704688660318257222/DSC00400.JPG)

(https://cdn.discordapp.com/attachments/551189586215305221/704687709246980157/DSC00389.JPG)

****ty pics. will get nicer onces when it's somewhat sunny out lol

colors are more saturated than the renders, but it's a prototype so I don't mind much. fwiw they match the RAL colors within 5% so it must be my render environment not being saturated enough :P
Title: Re: [IC] hiney tkl one
Post by: dallman5 on Tue, 28 April 2020, 08:49:15
Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704688660318257222/DSC00400.JPG)


Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704687709246980157/DSC00389.JPG)


****ty pics. will get nicer onces when it's somewhat sunny out lol

colors are more saturated than i'd like, but it's a prototype so I don't mind much

thats a nice purp, should go well with taro/frost witch
Title: Re: [IC] hiney tkl one
Post by: finalarcadia on Tue, 28 April 2020, 09:58:50
nice

Sent from my Pixel 3 using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: utsukishi on Tue, 28 April 2020, 10:07:23
Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704688660318257222/DSC00400.JPG)


Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704687709246980157/DSC00389.JPG)


****ty pics. will get nicer onces when it's somewhat sunny out lol

colors are more saturated than the renders, but it's a prototype so I don't mind much. fwiw they match the RAL colors within 5% so it must be my render environment not being saturated enough :P

very nice mr hiney, purple reign supreme
Title: Re: [IC] hiney tkl one
Post by: dantambok on Tue, 28 April 2020, 10:15:46
that 2 part weight looks neat!
Title: Re: [IC] hiney tkl one
Post by: kolashnikov on Tue, 28 April 2020, 10:22:20
I'm really digging the proto purple a lot more than the render color.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 28 April 2020, 10:53:22
(https://cdn.discordapp.com/attachments/551189586215305221/704692853741453312/image0.jpg)

Color comparison vs. 4011 from the RAL K7 deck. the alu is not the high-gloss like the printed paper is obviously, but I think it's p damn spot on. I may see if they'd be able to do the lighter RAL 4012 to get a bit more grey in.

also some gold stuff

(https://cdn.discordapp.com/attachments/551189586215305221/704718948947460116/DSC00409.JPG)

(https://cdn.discordapp.com/attachments/551189586215305221/704718989947043849/DSC00404.JPG)

(https://cdn.discordapp.com/attachments/551189586215305221/704692850335416330/image0.jpg)
Title: Re: [IC] hiney tkl one
Post by: CrazyAssMonkey on Tue, 28 April 2020, 10:55:47
Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704692853741453312/image0.jpg)


Color comparison vs. 4011 from the RAL K7 deck. the alu is not the high-gloss like the printed paper is obviously, but I think it's p damn spot on. I may see if they'd be able to do the lighter RAL 4012 to get a bit more grey in.

also some gold stuff

Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704718948947460116/DSC00409.JPG)


Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704718989947043849/DSC00404.JPG)


Show Image
(https://cdn.discordapp.com/attachments/551189586215305221/704692850335416330/image0.jpg)


Oh wow thats beautiful man. I can't even decide which looks better.
Title: Re: [IC] hiney tkl one
Post by: Remsky on Tue, 28 April 2020, 11:07:24
I love lilac and lilac accessories.
Title: Re: [IC] hiney tkl one
Post by: blitz on Tue, 28 April 2020, 11:08:45
This is the one
Title: Re: [IC] hiney tkl one
Post by: sirieous on Tue, 28 April 2020, 11:16:06
looks sooo nice
Title: Re: [IC] hiney tkl one
Post by: mode on Tue, 28 April 2020, 11:23:03
That purple is a lot more intense than I expected!

Still team purple all the way!
Title: Re: [IC] hiney tkl one
Post by: iammeuru on Tue, 28 April 2020, 11:28:30
Plz take my money now, lol. The protos look gorgeous. I like the colors a lot as-is tbh.
Title: Re: [IC] hiney tkl one
Post by: cdhoffmann on Tue, 28 April 2020, 11:46:59
This is looking CLEAN. Love the two piece weight. Hope i can snag one :)
Title: Re: [IC] hiney tkl one
Post by: chits on Tue, 28 April 2020, 11:52:50
4012 gmv
Title: Re: [IC] hiney tkl one
Post by: kbye on Tue, 28 April 2020, 11:55:19
that hiney looking real good
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Tue, 28 April 2020, 12:13:04
I'd be happy with either of the two purps, but if I had to choose, it'd be 4012 :thumb:
Title: Re: [IC] hiney tkl one
Post by: Hell-es on Tue, 28 April 2020, 12:14:58
Hihi, vote for 2005 Firewatch Orange ;)

Damn nice board
Title: Re: [IC] hiney tkl one
Post by: trg1234 on Tue, 28 April 2020, 13:10:28
ral 4012 would look noice all the colors looking nice as well though.
Title: Re: [IC] hiney tkl one
Post by: pr0ximity on Tue, 28 April 2020, 20:15:45
That weight is very neat, good lookin
Title: Re: [IC] hiney tkl one
Post by: thornkin on Tue, 28 April 2020, 22:22:14
I like the side profile where I can get a grip on it as opposed to the hbcp that was totally flush.  Looks great!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 28 April 2020, 23:51:25
built the purp one up on stream tonight. swapped the plate over to the gold case.

(https://live.staticflickr.com/65535/49832643612_908800fdbd_o.jpg)
Title: Re: [IC] hiney tkl one
Post by: Mcnos on Wed, 29 April 2020, 00:51:24
nice kb dad
Title: Re: [IC] hiney tkl one
Post by: wil on Wed, 29 April 2020, 00:55:13
too good. i'm ready for the future, metaphorically f5'ing the google doc FCFS form. can't wait
Title: Re: [IC] hiney tkl one
Post by: Solotov on Wed, 29 April 2020, 01:16:23
Canít wait for typing clip  :-*
Title: Re: [IC] hiney tkl one
Post by: whitemamba on Wed, 29 April 2020, 01:21:22
Insta buy, cannot wait for the GB to be opened ...
Title: Re: [IC] hiney tkl one
Post by: switchnollie on Wed, 29 April 2020, 03:00:34
Still hoping for that unlikely poly to happen 😌🤞
Title: Re: [IC] hiney tkl one
Post by: VXQN on Wed, 29 April 2020, 03:09:58
Holy moly, both protos look so good!
Title: Re: [IC] hiney tkl one
Post by: Sycomore on Wed, 29 April 2020, 04:55:16
OH LAWD Hiney!
Title: Re: [IC] hiney tkl one
Post by: hottrout on Wed, 29 April 2020, 05:33:14
That gold/silver colour is beautiful.  Is this going to be an option?
Title: Re: [IC] hiney tkl one
Post by: o3okevin on Wed, 29 April 2020, 07:33:11
amaze
Title: Re: [IC] hiney tkl one
Post by: Neostoic on Wed, 29 April 2020, 09:35:05
Man oh man, beautiful!
Hopefully I can get in.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Wed, 29 April 2020, 10:13:15
That gold/silver colour is beautiful.  Is this going to be an option?

yea. it will be available with one of the runs. the official color name is "goldish" aka RAL 1035 Perlbeige. I incorrectly included a reference to RAL 7048 earlier.

(https://cdn.discordapp.com/attachments/569729511269335052/704931906155839488/image0.jpg)
Title: Re: [IC] hiney tkl one
Post by: hottrout on Wed, 29 April 2020, 10:17:39
That is sweet
Title: Re: [IC] hiney tkl one
Post by: macclack on Wed, 29 April 2020, 17:37:53
God those protos are gorgeous. Awesome job hiney
Title: Re: [IC] hiney tkl one
Post by: Kira on Wed, 29 April 2020, 19:38:05
All in for dark grey WKL!
Title: Re: [IC] hiney tkl one
Post by: frostfiree on Wed, 29 April 2020, 20:02:41
All in for dark grey WKL!

I think only the light gold and lilac this run, right?
Title: Re: [IC] hiney tkl one
Post by: Rumblehotep on Wed, 29 April 2020, 20:43:46
Which color would best match DCS Yuri I wonder
Title: Re: [IC] hiney tkl one
Post by: jayoliver on Wed, 29 April 2020, 20:59:41
LAWDY this might be the first TKL I've been searching for, such a beauty!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Wed, 29 April 2020, 22:16:15
All in for dark grey WKL!

I think only the light gold and lilac this run, right?

colors for the first round are undecided. I will publish a schedule of colors based on round once I finalize that.
Title: Re: [IC] hiney tkl one
Post by: bigapplepietart on Thu, 30 April 2020, 16:46:43
Gold ain't bad. I'm hoping for silver or poly doe.
Title: Re: [IC] hiney tkl one
Post by: switchnollie on Thu, 30 April 2020, 17:09:44
torx screw, my guy this gonna be fuego :cool:
Title: Re: [IC] hiney tkl one
Post by: Dumble_Hub on Thu, 30 April 2020, 18:25:00
Which color would best match DCS Yuri I wonder

Great minds think alike I see.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 30 April 2020, 19:14:58
torx screw, my guy this gonna be fuego :cool:

torx makes me feel a certain way
also a good excuse to make people buy good screwdrivers
Title: Re: [IC] hiney tkl one
Post by: Rob27shred on Thu, 30 April 2020, 19:21:03
torx screw, my guy this gonna be fuego :cool:

torx makes me feel a certain way
also a good excuse to make people buy good screwdrivers

Here, here to quality tools! I'm a carpenter so quality tools make me feel a certain way! :p Seriously though, this board does look it's coming together great! I've actually been stashing loot for whenever this goes to GB & am hoping I can make it my first high end custom TKL. Gotta support a local Yinzer! :thumb:
Title: Re: [IC] hiney tkl one
Post by: kr0_- on Thu, 30 April 2020, 21:52:40
woooooow so nice!!! like the gold one!
Title: Re: [IC] hiney tkl one
Post by: KMPLSV on Sat, 02 May 2020, 05:49:57
are they all going to be WKL?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 02 May 2020, 09:47:12
are they all going to be WKL?

no
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 04 May 2020, 12:48:12
please fill out the color IC so I can get an idea of what people want!

https://forms.gle/NcExARRK5tbS2eZb9

reference album for the IC: https://imgur.com/a/trUGujl

note that the colors in the album are not the 100% final shades, but are just used to get an idea of what I'll be going for.
Title: Re: [IC] hiney tkl one
Post by: dallman5 on Mon, 04 May 2020, 12:53:47
ooo midnight green would be sick
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Mon, 04 May 2020, 17:28:05
midnight green is def a winner! lilac-gray???
Title: Re: [IC] hiney tkl one
Post by: hingchannnn on Mon, 04 May 2020, 20:44:59
Midnight Green  :thumb:
Title: Re: [IC] hiney tkl one
Post by: Solotov on Mon, 04 May 2020, 21:56:45
Light gold all the way  ;D
Title: Re: [IC] hiney tkl one
Post by: steezkeez on Tue, 05 May 2020, 13:00:28
Gonna be a hard decision between Lilac, Midnight Green, and Light Gold...
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 05 May 2020, 13:31:52
Gonna be a hard decision between Lilac, Midnight Green, and Light Gold...

luckily they won't run at the same time

I'll announce pairings as I go, but I'll try to always say what the next round color pairings will be so people can plan accordingly.
Title: Re: [IC] hiney tkl one
Post by: switchnollie on Tue, 05 May 2020, 13:57:51
Will be keeping an eye out for any PC options then 😎

Saw someone with one of your 1800's with I think a purple PC case, not sure if that was just something they went n made afterwards tho.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 05 May 2020, 22:13:02
Will be keeping an eye out for any PC options then 😎

Saw someone with one of your 1800's with I think a purple PC case, not sure if that was just something they went n made afterwards tho.

that was mine yea lol. ill do pc eventually
Title: Re: [IC] hiney tkl one
Post by: supern00b on Wed, 06 May 2020, 15:29:19
How will this go live? hiney.cc storefront? Is there a mailing list I can subscribe to?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Wed, 06 May 2020, 21:30:07
How will this go live? hiney.cc storefront? Is there a mailing list I can subscribe to?

I don't do a mailing list atm but I would like to eventually. I am still figuring out how I want to do the buy, but it will potentially be like hbcp - google form then invoiced from my store.

the best place to get updates atm is my discord, discord.hiney.cc (type/paste this into your browser)
Title: Re: [IC] hiney tkl one
Post by: m1gs on Wed, 06 May 2020, 22:37:08
I hope I can get one. :( I am going to use this for my ALPS build.
Title: Re: [IC] hiney tkl one
Post by: KRY2SOON on Thu, 07 May 2020, 05:05:17
Wow the purple is something else...  :eek:
Title: Re: [IC] hiney tkl one
Post by: mode on Thu, 07 May 2020, 05:30:41
I had a big bag of pristine SKCL greens arrive in the mail today, recon they'll go well with this!
Title: Re: [IC] hiney tkl one
Post by: hineybush on Thu, 07 May 2020, 11:15:29
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)

sorry
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Thu, 07 May 2020, 11:30:47
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

not sorry
Title: Re: [IC] hiney tkl one
Post by: Solotov on Thu, 07 May 2020, 11:39:55
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

This post means that the first run will be light gold. Sorry for people who want other colors  ;D
Title: Re: [IC] hiney tkl one
Post by: ReDsNoTDeAd on Thu, 07 May 2020, 15:50:41
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

You've crossed the render/reality border for the last time, propane man. :eek:
Title: Re: [IC] hiney tkl one
Post by: FLawLesS on Thu, 07 May 2020, 15:58:51
Hiney this looks amazing bro, looking forward to the GB (:
Title: Re: [IC] hiney tkl one
Post by: pr0ximity on Thu, 07 May 2020, 21:57:48
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

That color is great, reminds me of the nice warm 910CE grey
Title: Re: [IC] hiney tkl one
Post by: pixelpusher on Thu, 07 May 2020, 22:50:29
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

That color is great, reminds me of the nice warm 910CE grey

Gonna look 🔥 with WoB Alps caps on it, too :)
Title: Re: [IC] hiney tkl one
Post by: are2dcrz on Thu, 07 May 2020, 22:53:17
down for the tkl!
Title: Re: [IC] hiney tkl one
Post by: rafamundez on Fri, 08 May 2020, 02:48:34
any chance a WK version will happen too?
Title: Re: [IC] hiney tkl one
Post by: Mcnos on Fri, 08 May 2020, 06:21:51
Show Image
(https://live.staticflickr.com/65535/49867341297_61f6dcf3d9_4k.jpg)


sorry

Nice balls
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Fri, 08 May 2020, 10:15:16
Midnight green or some sort of drab olive checking in

Make it happen my dude
Title: Re: [IC] hiney tkl one
Post by: hiddensong on Sat, 09 May 2020, 00:10:42
Love the designs hiney but everyone is going small. I absolutely gushed over your 1800 and am waiting patiently for a R2. Any chance of that in the near future?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 09 May 2020, 00:33:15
Love the designs hiney but everyone is going small. I absolutely gushed over your 1800 and am waiting patiently for a R2. Any chance of that in the near future?

yea
Title: Re: [IC] hiney tkl one
Post by: rafamundez on Sat, 09 May 2020, 20:45:04
Will there be a WK version as well?
Title: Re: [IC] hiney tkl one
Post by: L8T on Sat, 09 May 2020, 21:45:11
Off-topic but any1 know whats the blue gray keyboard owned by lightningxi in color reference album? Looks like an otd 356mini but seamless.
Title: Re: [IC] hiney tkl one
Post by: clik_clak on Sat, 09 May 2020, 21:49:07
Off-topic but any1 know whats the blue gray keyboard owned by lightningxi in color reference album? Looks like an otd 356mini but seamless.

Noxary T60
Title: Re: [IC] hiney tkl one
Post by: L8T on Sat, 09 May 2020, 21:51:27
Thanks bb <3
Title: Re: [IC] hiney tkl one
Post by: hineybush on Sat, 09 May 2020, 22:26:09
Will there be a WK version as well?

yes
Title: Re: [IC] hiney tkl one
Post by: heartbreak on Sun, 10 May 2020, 05:07:23
really hoping lilac would be in the first run :cool:
Title: Re: [IC] hiney tkl one
Post by: mrboli on Sun, 10 May 2020, 08:51:53
+1 very light gold

Sent from my ONEPLUS A5010 using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: DuellM on Mon, 11 May 2020, 09:48:52
I really like that lilac one. It makes me feel weird that I like it but I do.
Title: Re: [IC] hiney tkl one
Post by: DiscoCrocodile on Sun, 17 May 2020, 02:55:08
I might F around and buy this.
Title: Re: [IC] hiney tkl one
Post by: JimBobJones on Sun, 17 May 2020, 03:05:54
Defiantly keen on picking one up
Title: Re: [IC] hiney tkl one
Post by: HesterDW on Sun, 17 May 2020, 17:59:19
I love this color. My first mech was a CM Quickfire Rapid in a very light gold. But it seems every custom I find in this color is unobtainable. It'll be nice to have another option that I can't obtain.
Title: Re: [IC] hiney tkl one
Post by: IOVERCALLHISTIOCYTES on Sun, 17 May 2020, 18:26:57
I love this color. My first mech was a CM Quickfire Rapid in a very light gold. But it seems every custom I find in this color is unobtainable. It'll be nice to have another option that I can't obtain.

LOL
I feel this, and also every time 4 colors are picked in a poll and I didn't want any of them. There's some colors available in cerakote that might be a work around. Sometimes some boards with irregular finish are available cheaper too which might dovetail into a recolor
Title: Re: [IC] hiney tkl one
Post by: vncsnty on Mon, 18 May 2020, 09:00:03
I'm excited for this! Any color is dope TBH.
Title: Re: [IC] hiney tkl one
Post by: hottrout on Tue, 19 May 2020, 05:45:03
Nothing difficult about the decision at all.  Silvery gold it is.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Wed, 20 May 2020, 00:14:18
(https://cdn.discordapp.com/attachments/569729511269335052/712529776082157639/unknown.png)

Title: Re: [IC] hiney tkl one
Post by: Puddsy on Wed, 20 May 2020, 00:19:55
Show Image
(https://cdn.discordapp.com/attachments/569729511269335052/712529776082157639/unknown.png)


Pog
Title: Re: [IC] hiney tkl one
Post by: Alessio01 on Fri, 22 May 2020, 01:18:22
praying for lilac  :D
Title: Re: [IC] hiney tkl one
Post by: Handke on Fri, 22 May 2020, 05:02:13
Super nice basic keyboard. This is so simple, effective and elegant that I wonder why there isn't a constant high quality supply of these products.
I'd like a nice inox finish (opaque , like the apple a1243 keyboard).

[attachimg=1]
Title: Re: [IC] hiney tkl one
Post by: heartbreak on Fri, 22 May 2020, 05:22:27
praying for lilac  :D
Gold will run first
Title: Re: [IC] hiney tkl one
Post by: andyduong on Fri, 22 May 2020, 06:29:49
hi Hiney, can I join a closed private buy?
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Fri, 22 May 2020, 07:17:58
hi Hiney, can I join a closed private buy?

Yuh
Title: Re: [IC] hiney tkl one
Post by: hineybush on Fri, 22 May 2020, 08:29:19
hi Hiney, can I join a closed private buy?

no sorrey
Title: Re: [IC] hiney tkl one
Post by: Kelly87 on Sun, 24 May 2020, 21:51:25
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 25 May 2020, 00:49:13
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!

Somehow I don't see this happening.
Title: Re: [IC] hiney tkl one
Post by: Zacharius on Mon, 25 May 2020, 00:50:50
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Now thatís some great low quality bait.


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: Kelly87 on Mon, 25 May 2020, 08:07:15
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Now thatís some great low quality bait.


Sent from my iPhone using Tapatalk

Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!

Somehow I don't see this happening.

/r/woosh
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 25 May 2020, 08:15:12
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Now thatís some great low quality bait.


Sent from my iPhone using Tapatalk

Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!

Somehow I don't see this happening.

/r/woosh

This forum is filled with entirely too many posters just like your parody for it to be taken as anything but face value mate, especially with a low postcount :p
Title: Re: [IC] hiney tkl one
Post by: Puddsy on Mon, 25 May 2020, 12:15:08
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Now thatís some great low quality bait.


Sent from my iPhone using Tapatalk

Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!

Somehow I don't see this happening.

/r/woosh

This forum is filled with entirely too many posters just like your parody for it to be taken as anything but face value mate, especially with a low postcount :p

kelly is a frequent discord user and well known ****poster

also post count doesn't mean ****
Title: Re: [IC] hiney tkl one
Post by: drfranco on Mon, 25 May 2020, 12:29:14
Saw on the discord a possibility of running a numpad alongside the tkl-one. Please, please do that!
Title: Re: [IC] hiney tkl one
Post by: Kelly87 on Mon, 25 May 2020, 13:11:04
Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!
Now thatís some great low quality bait.


Sent from my iPhone using Tapatalk

Hi there sir, former streamer and fan of hineyboards, may join private gb I? I review board on youtube nicely if send for free !!

Somehow I don't see this happening.

/r/woosh

This forum is filled with entirely too many posters just like your parody for it to be taken as anything but face value mate, especially with a low postcount :p

kelly is a frequent discord user and well known ****poster

also post count doesn't mean ****

Elated Elder providing elated wisdom
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 25 May 2020, 13:12:08
Saw on the discord a possibility of running a numpad alongside the tkl-one. Please, please do that!

v good chance of offering it, more of a "do you want to buy the numpad too" and getting a discount during the numpad gb (or it will run alongside)
Title: Re: [IC] hiney tkl one
Post by: hicals on Mon, 25 May 2020, 14:07:26
When does gb start?
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 25 May 2020, 15:09:19
When does gb start?

likely mid-late June
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Mon, 25 May 2020, 15:34:34
also post count doesn't mean ****

I resent this.
Title: Re: [IC] hiney tkl one
Post by: mode on Mon, 25 May 2020, 15:44:33
kelly is a frequent discord user and well known ****poster

also post count doesn't mean ****

It means something when evaluating how likely a ****post is sarcastic or not as there's no context for someone that doesn't use discord. Sarcasm without context is impossible to distinguish. Obviously I'm not saying post postcount is a linear distinguishing measure for clout or whatever.
Title: Re: [IC] hiney tkl one
Post by: DALExSNAIL on Mon, 25 May 2020, 15:46:44
Obviously I'm not saying post postcount is a linear distinguishing measure for clout or whatever.

I'm here to contest that, in fact, it is.
Title: Re: [IC] hiney tkl one
Post by: Kelly87 on Mon, 25 May 2020, 16:06:19
I like to eat spaghetti on the weekends, and ****post while my hands are still covered in spaghetti sauce.
Title: Re: [IC] hiney tkl one
Post by: bigapplepietart on Mon, 25 May 2020, 19:03:52
spaghetti
Title: Re: [IC] hiney tkl one
Post by: IOVERCALLHISTIOCYTES on Mon, 25 May 2020, 19:21:07
Saw on the discord a possibility of running a numpad alongside the tkl-one. Please, please do that!

v good chance of offering it, more of a "do you want to buy the numpad too" and getting a discount during the numpad gb (or it will run alongside)

lets say I'm lucky enough to get in the TKL GB. discount or not, it would be cool if those of us who wanted a matching numpad could get in on the numpad GB.
Title: Re: [IC] hiney tkl one
Post by: prizeS on Mon, 25 May 2020, 23:37:41
Saw on the discord a possibility of running a numpad alongside the tkl-one. Please, please do that!

v good chance of offering it, more of a "do you want to buy the numpad too" and getting a discount during the numpad gb (or it will run alongside)

yis plz
Title: Re: [IC] hiney tkl one
Post by: hingchannnn on Tue, 26 May 2020, 01:41:43
Saw on the discord a possibility of running a numpad alongside the tkl-one. Please, please do that!

v good chance of offering it, more of a "do you want to buy the numpad too" and getting a discount during the numpad gb (or it will run alongside)

Very nice, Mr.Hineybush.
Title: Re: [IC] hiney tkl one
Post by: hottrout on Tue, 26 May 2020, 02:38:29
Numpad for me as well please.
Title: Re: [IC] hiney tkl one
Post by: Jaxxstatic on Tue, 26 May 2020, 10:55:30
Numpad would be so sick. Please.
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 01 June 2020, 13:27:57
hi, update time!

protos ordered and in. everything is great, I had to make two small changes to the case itself and I also modified the weight a bit to add some more screws (the weight screws are all internal).

I am planning on starting the group buy in mid/late June of this year (2020).

the PCB (h87c-hsp) prototypes are good to go.

I am considering offering a numpad alongside the tkl. it's called num one. very original. it's the same aesthetically as the tkl, including angle, front edge, side cuts, etc. it will use my h10 PCB, a USB Type C-ported numpad PCB. Avail in via.

the num one is being prototyped rn.

It would likely be a ~$180-200 addition to the tkl one itself. maybe a bit cheaper depending on if i want to make less money or not. i would offer it in the same colors as the tkl during each run.

(https://cdn.discordapp.com/attachments/358266322343428096/717034117165875230/unknown.png)

(https://cdn.discordapp.com/attachments/358266322343428096/717034164032897094/unknown.png)

oh speaking of colors.

round one of the tkl one colors will be gold and black.

the gold is RAL 1035, same as my prototype. the black is, black.

(https://live.staticflickr.com/65535/49923350911_3c0e3306b9_6k.jpg)

I will run the buy as a raffle. It will be a bit more involved (on my end) than a normal take-all-entries-and-pick-the-top-X-as-winners style. I would like to do a "multi-stage" raffle, randomizing entried and eliminating X% per "round" until it's at the desired number of winners. It won't operate differently than others since it'll still be fully random. I may add something like, people who progress further in the process but don't win have additional entries into future raffles/buys of mine. Not sure how that would all work but it'd be interesting I think.

I'm unsure if I will run that process via Google Form or if I'll have to get a raffle form set up through a somewhat nicer front end. I'll look into it.



Title: Re: [IC] hiney tkl one
Post by: Mcnos on Mon, 01 June 2020, 13:30:03
hi, update time!

protos ordered and in. everything is great, I had to make two small changes to the case itself and I also modified the weight a bit to add some more screws (the weight screws are all internal).

I am planning on starting the group buy in mid/late June of this year (2020).

the PCB (h87c-hsp) prototypes are good to go.

I am considering offering a numpad alongside the tkl. it's called num one. very original. it's the same aesthetically as the tkl, including angle, front edge, side cuts, etc. it will use my h10 PCB, a USB Type C-ported numpad PCB. Avail in via.

the num one is being prototyped rn.

It would likely be a ~$180-200 addition to the tkl one itself. maybe a bit cheaper depending on if i want to make less money or not. i would offer it in the same colors as the tkl during each run.

Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034117165875230/unknown.png)


Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034164032897094/unknown.png)


oh speaking of colors.

round one of the tkl one colors will be gold and black.

the gold is RAL 1035, same as my prototype. the black is, black.

Show Image
(https://live.staticflickr.com/65535/49923350911_3c0e3306b9_6k.jpg)


How black we talking
Title: Re: [IC] hiney tkl one
Post by: HoodrowThrillson on Mon, 01 June 2020, 13:30:55
hi, update time!

protos ordered and in. everything is great, I had to make two small changes to the case itself and I also modified the weight a bit to add some more screws (the weight screws are all internal).

I am planning on starting the group buy in mid/late June of this year (2020).

the PCB (h87c-hsp) prototypes are good to go.

I am considering offering a numpad alongside the tkl. it's called num one. very original. it's the same aesthetically as the tkl, including angle, front edge, side cuts, etc. it will use my h10 PCB, a USB Type C-ported numpad PCB. Avail in via.

the num one is being prototyped rn.

It would likely be a ~$180-200 addition to the tkl one itself. maybe a bit cheaper depending on if i want to make less money or not. i would offer it in the same colors as the tkl during each run.

Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034117165875230/unknown.png)


Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034164032897094/unknown.png)


oh speaking of colors.

round one of the tkl one colors will be gold and black.

the gold is RAL 1035, same as my prototype. the black is, black.

Show Image
(https://live.staticflickr.com/65535/49923350911_3c0e3306b9_6k.jpg)


In for gold baby
Title: Re: [IC] hiney tkl one
Post by: lbassett21 on Mon, 01 June 2020, 13:34:59
hi, update time!

protos ordered and in. everything is great, I had to make two small changes to the case itself and I also modified the weight a bit to add some more screws (the weight screws are all internal).

I am planning on starting the group buy in mid/late June of this year (2020).

the PCB (h87c-hsp) prototypes are good to go.

I am considering offering a numpad alongside the tkl. it's called num one. very original. it's the same aesthetically as the tkl, including angle, front edge, side cuts, etc. it will use my h10 PCB, a USB Type C-ported numpad PCB. Avail in via.

the num one is being prototyped rn.

It would likely be a ~$180-200 addition to the tkl one itself. maybe a bit cheaper depending on if i want to make less money or not. i would offer it in the same colors as the tkl during each run.

Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034117165875230/unknown.png)


Show Image
(https://cdn.discordapp.com/attachments/358266322343428096/717034164032897094/unknown.png)


oh speaking of colors.

round one of the tkl one colors will be gold and black.

the gold is RAL 1035, same as my prototype. the black is, black.

Show Image
(https://live.staticflickr.com/65535/49923350911_3c0e3306b9_6k.jpg)


I am very very in for Black. So down for this to happen!
Title: Re: [IC] hiney tkl one
Post by: zian_ on Mon, 01 June 2020, 13:37:48
in4 Au
Title: Re: [IC] hiney tkl one
Post by: Puddsy on Mon, 01 June 2020, 13:41:21
****in hiney

those are the 2 best colors

makin my life hard
Title: Re: [IC] hiney tkl one
Post by: ttom on Mon, 01 June 2020, 13:54:25
I like the gold
Title: Re: [IC] hiney tkl one
Post by: mta on Mon, 01 June 2020, 14:02:18
In for gold baby
Title: Re: [IC] hiney tkl one
Post by: MMKB on Mon, 01 June 2020, 14:11:52
In for One!  :-*

Are the edges sharp? Speaking as someone who owned Tofu before
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 01 June 2020, 14:12:36
In for One!  :-*

Are the edges sharp? Speaking as someone who owned Tofu before

not "sharp". they have a very small fillet so they're on the "sharper side" of things.
Title: Re: [IC] hiney tkl one
Post by: SolidCactus on Mon, 01 June 2020, 14:14:24
Yes please to the black edition!
Title: Re: [IC] hiney tkl one
Post by: PoohGom on Mon, 01 June 2020, 14:44:00
This TKL looks great! I'm sad that the lilac isn't happening, but I am hoping I am lucky enough to get the gold or even the lilac in your future projects.
Title: Re: [IC] hiney tkl one
Post by: ab042896 on Mon, 01 June 2020, 14:51:02
That gold is incredible  :eek:
Title: Re: [IC] hiney tkl one
Post by: hineybush on Mon, 01 June 2020, 14:53:23
This TKL looks great! I'm sad that the lilac isn't happening, but I am hoping I am lucky enough to get the gold or even the lilac in your future projects.

lilac will likely be in the next round.
Title: Re: [IC] hiney tkl one
Post by: Vadurr on Mon, 01 June 2020, 15:27:44
One hiney to rule them all...
Title: Re: [IC] hiney tkl one
Post by: ramnes on Mon, 01 June 2020, 16:02:23
yisss
Title: Re: [IC] hiney tkl one
Post by: hottrout on Mon, 01 June 2020, 16:19:59
OK so at this point just turn me over because I am done.  Gold TKL and Numpad to match please.  Where do I pay.  This has the possibility to become my daily work rig.
Title: Re: [IC] hiney tkl one
Post by: noorejji on Mon, 01 June 2020, 16:35:09
Very interesting concept to give losers a higher chance to win in later raffles.
Title: Re: [IC] hiney tkl one
Post by: razor_blade on Mon, 01 June 2020, 16:37:06
Hiney, I would die and go to heaven for a purple polycarbonate set. Any chance you will do some?
Title: Re: [IC] hiney tkl one
Post by: JimBobJones on Mon, 01 June 2020, 16:38:41
Gold TKL with numpad is what i have been waiting for, will defiantly be trying to get one :)
Title: Re: [IC] hiney tkl one
Post by: bmo711xd on Mon, 01 June 2020, 17:22:47
Hiney, I would die and go to heaven for a purple polycarbonate set. Any chance you will do some?
I like purple as well

Sent from my SM-G960U using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: OfTheWild on Mon, 01 June 2020, 17:25:05
Count me in for a gold one  :thumb:
Title: Re: [IC] hiney tkl one
Post by: VXQN on Tue, 02 June 2020, 04:25:10
Wasn't expecting this to come around so quickly! Everything is looking great.
Title: Re: [IC] hiney tkl one
Post by: mode on Tue, 02 June 2020, 06:43:03
Hiney, I would die and go to heaven for a purple polycarbonate set. Any chance you will do some?


purple polycarb would be the best, especially if it was like gameboy plastic.
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Tue, 02 June 2020, 07:24:47
Can always dye your polycarb purple

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: dallman5 on Tue, 02 June 2020, 07:29:51
Can always dye your polycarb purple

Sent from my Pixel 3 XL using Tapatalk
How hard is it to dye polycarbonate? This isnít the first time Iíve read about people doing it, so Iím curious if there are guides about it. My worries have always been getting a nice and even coating, I would hate to take an expensive custom board and have it turn out blotchy.
Title: Re: [IC] hiney tkl one
Post by: Zeelobby on Tue, 02 June 2020, 07:35:26
Can always dye your polycarb purple

Sent from my Pixel 3 XL using Tapatalk
How hard is it to dye polycarbonate? This isnít the first time Iíve read about people doing it, so Iím curious if there are guides about it. My worries have always been getting a nice and even coating, I would hate to take an expensive custom board and have it turn out blotchy.
Now I personally have never done it, but people have posted results. In the comments the dye used was linked.

https://www.reddit.com/r/MechanicalKeyboards/comments/ekwzbi/handdyed_polycarbonate_cases/?utm_medium=android_app&utm_source=share

Sent from my Pixel 3 XL using Tapatalk

Title: Re: [IC] hiney tkl one
Post by: GMK83 on Tue, 02 June 2020, 07:49:17
Crossing my fingers for both the TKL and Num Pad!
Title: Re: [IC] hiney tkl one
Post by: pixelpusher on Tue, 02 June 2020, 10:16:40
Hope I get a chance to show everyone my big black hiney some day
Title: Re: [IC] hiney tkl one
Post by: hineybush on Tue, 02 June 2020, 12:32:01
new build VOD up:


Sent from my iPhone using Tapatalk
Title: Re: [IC] hiney tkl one
Post by: PoohGom on Tue, 02 June 2020, 14:49:24
new build VOD up:




I just finished watching the VOD, you sir have great taste in drinks, Pale Ale + DIET Dr. Pepper are two of my favorite drinks. I will definitely have to tune in to your next stream as well! I know I said this, but that lilac is so niiiice. Glacial Blue for the future rounds would be amazing too, I am anxious to see your future projects  :thumb:
Title: Re: [IC] hiney tkl one
Post by: bananathock on Wed, 03 June 2020, 01:37:06
I'mma watch this VOD. An angel's voice recorded.
Title: Re: [IC] hiney tkl one
Post by: Arithmetics on Thu, 04 June 2020, 18:36:30
i think the 'advanced raffle' idea is pretty cool and could reward early backers/followers over people who see it later and want to get in (not that that's always the goal, debatable either way).

Suggestion to make it easier would just be to make everyone who entered the first lottery and didnt win would have double the odds the next round, and double again after that etc so your odds go up even if more people are entering next rounds.

def in for raffle one regardless. nice work.